/******************************************************************************* 
 * FreeRTOS+Trace v2.2.2 Recorder Library
 * Percepio AB, www.percepio.se
 *
 * trcPort.h
 *
 * Contains together with trcPort.c all portability issues of the trace recorder 
 * library.
 *
 * Terms of Use
 * This software is copyright Percepio AB. The recorder library is free for
 * use together with Percepio products. You may distribute the recorder library
 * in its original form, including modifications in trcPort.c and trcPort.h
 * given that these modification are clearly marked as your own modifications
 * and documented in the initial comment section of these source files. 
 * This software is the intellectual property of Percepio AB and may not be 
 * sold or in other ways commercially redistributed without explicit written 
 * permission by Percepio AB.
 *
 * Disclaimer 
 * The trace tool and recorder library is being delivered to you AS IS and 
 * Percepio AB makes no warranty as to its use or performance. Percepio AB does 
 * not and cannot warrant the performance or results you may obtain by using the 
 * software or documentation. Percepio AB make no warranties, express or 
 * implied, as to noninfringement of third party rights, merchantability, or 
 * fitness for any particular purpose. In no event will Percepio AB, its 
 * technology partners, or distributors be liable to you for any consequential, 
 * incidental or special damages, including any lost profits or lost savings, 
 * even if a representative of Percepio AB has been advised of the possibility 
 * of such damages, or for any claim by any third party. Some jurisdictions do 
 * not allow the exclusion or limitation of incidental, consequential or special 
 * damages, or the exclusion of implied warranties or limitations on how long an 
 * implied warranty may last, so the above limitations may not apply to you.
 *
 * FreeRTOS+Trace is available as Free Edition and in two premium editions.
 * You may use the premium features during 30 days for evaluation.
 * Download FreeRTOS+Trace at http://www.percepio.se/index.php?page=downloads
 *
 * Copyright Percepio AB, 2012.
 * www.percepio.se
 ******************************************************************************/

#ifndef TRCPORT_H
#define TRCPORT_H

#include "trcBase.h"

/* If FreeRTOS Win32 port */
#ifdef WIN32

   #undef _WIN32_WINNT
   #define _WIN32_WINNT 0x0600

   /* Standard includes. */
   #include <stdio.h>
   #include <windows.h>
   #include <direct.h>

/*******************************************************************************
 * The Win32 port by default saves the trace to file and then kills the
 * program when the recorder is stopped, to facilitate quick, simple tests
 * of the recorder.
 ******************************************************************************/
   #define WIN32_PORT_SAVE_WHEN_STOPPED 1
   #define WIN32_PORT_EXIT_WHEN_STOPPED 1

#endif

#define DIRECTION_INCREMENTING 1
#define DIRECTION_DECREMENTING 2

/******************************************************************************
 * Supported ports
 * 
 * PORT_HWIndependent
 * A hardware independent fallback option for event timestamping. Provides low 
 * resolution timestamps based on the OS tick.
 * This may be used on the Win32 port, but may also be used on embedded hardware 
 * platforms. Note that this gives suboptimal display in FreeRTOS+Trace. All 
 * time durations will be truncated to the OS tick frequency, typically 1 KHz. 
 * This means that a task or ISR that executes in less than 1 ms get an exection 
 * time of zero. They are however still visible in FreeRTOS+Trace. 
 *
 * PORT_Win32
 * "Accurate" timestamping based on the Windows permance counter. Note that
 * this gives the host machine time, not the simulated FreeRTOS time (tick 
 * count). The timing of the Win32 FreeRTOS build is not real-time, since it 
 * depends on the scheduling and tick rate of Windows, which is very slow.
 *
 * Officially supported hardware specific ports included are:
 * - PORT_Atmel_AT91SAM7
 * - PORT_ARM_CortexM 
 * - PORT_Renesas_RX600
 *
 * We also provide several "unofficial" hardware-specific ports. There have 
 * been developed by external contributors, and have not yet been verified 
 * by Percepio AB. Let us know if you have problems getting these to work.
 * 
 * Unoffical hardware specific ports provided are:
 * - PORT_TEXAS_INSTRUMENTS_TMS570
 * - PORT_TEXAS_INSTRUMENTS_MSP430
 * - PORT_MICROCHIP_PIC32
 * - PORT_MICROCHIP_dsPIC_AND_PIC24
 * - PORT_XILINX_PPC405
 * - PORT_XILINX_PPC440
 *
 ******************************************************************************/

#define PORT_NOT_SET                        -1

/* Officially supported ports */
#define PORT_HWIndependent 					0
#define PORT_Win32 							1
#define PORT_Atmel_AT91SAM7 				2
#define PORT_ARM_CortexM 					3
#define PORT_Renesas_RX600 					4

/* Unofficial ports, provided by external developers and not yet verified */
#define PORT_TEXAS_INSTRUMENTS_TMS570 		6
#define PORT_TEXAS_INSTRUMENTS_MSP430		7
#define PORT_MICROCHIP_PIC32				8
#define PORT_MICROCHIP_dsPIC_AND_PIC24		9
#define PORT_XILINX_PPC405					10
#define PORT_XILINX_PPC440					11

/*** Select your port here! **************************************************/
#define SELECTED_PORT PORT_Win32
/*****************************************************************************/

/*******************************************************************************
 * IRQ_PRIORITY_ORDER
 *
 * Macro which should be defined as an integer of 0 or 1.
 *
 * This should be 0 if lower irq priority values implies higher priority 
 * levels, such as on ARM Cortex M. If the opposite scheme is used, i.e., 
 * if higher irq priority values means higher priority, this should be 1.
 *
 * This setting is not critical. It is used only to sort and colorize the 
 * interrupts in priority order, in case you record interrupts using
 * the vTraceStoreISRBegin and vTraceStoreISREnd routines.
 *
 * We provide this setting for some hardware architectures below:
 * - ARM Cortex M:      0  (lower irq priority values are more significant)
 * - Atmel AT91SAM7x:   1  (higher irq priority values are more significant)
 * - Renesas RX62N:     1  (higher irq priority values are more significant)
 * - Microchip PIC24:   0  (lower irq priority values are more significant)
 * - Microchip dsPIC:   0  (lower irq priority values are more significant)
 * - TI TMS570 (ARM Cortex R4F): 0  (lower irq priority values are more significant)
 * - Freescale HCS08:   0  (lower irq priority values are more significant)
 * - Freescale HCS12:   0  (lower irq priority values are more significant)
 * - Freescale ColdFire:   1  (higher irq priority values are more significant)
 *
 * If your chip is not on the above list, and you perhaps know this detail by 
 * heart, please inform us by e-mail to support@percepio.se.
 ******************************************************************************/
#define IRQ_PRIORITY_ORDER 0

/*******************************************************************************
 * HWTC macros
 * 
 * These four macros provides a hardware isolation layer, representing a 
 * generic hardware timer/counter used for driving the operating system tick, 
 * such as the SysTick feature of ARM Cortex M3/M4, or the PIT of the Atmel 
 * AT91SAM7X.
 *
 * HWTC_COUNT: The current value of the counter. This is expected to be reset 
 * a each tick interrupt. Thus, when the tick handler starts, the counter has 
 * already wrapped.
 *
 * HWTC_COUNT_DIRECTION: Should be one of:
 * - DIRECTION_INCREMENTING - for hardware timer/counters of incrementing type
 *   such as the PIT on Atmel AT91SAM7X.
 *   When the counter value reach HWTC_PERIOD, it is reset to zero and the
 *   interrupt is signaled.
 * - DIRECTION_DECREMENTING - for hardware timer/counters of decrementing type
 *   such as the SysTick on ARM Cortex M3/M4 chips.
 *   When the counter value reach 0, it is reset to HWTC_PERIOD and the
 *   interrupt is signaled.
 *
 * HWTC_PERIOD: The number of increments or decrements of HWTC_COUNT between
 * two tick interrupts. This should preferably be mapped to the reload
 * register of the hardware timer, to make it more portable between chips in the 
 * same family. The macro should in most cases be (reload register + 1).
 *
 * HWTC_DIVISOR: If the timer frequency is very high, like on the Cortex M chips
 * (where the SysTick runs at the core clock frequency), the "differential 
 * timestamping" used in the recorder will more frequently insert extra XTS 
 * events to store the timestamps, which increases the event buffer usage. 
 * In such cases, to reduce the number of XTS events and thereby get a longer 
 * traces, you use HWTC_DIVISOR to scale down the timestamps and frequency.
 * Assuming a OS tick rate of 1 KHz, it is suggested to keep the effective timer
 * frequency below 65 MHz to avoid an excessive amount of XTS events. Thus, a
 * Cortex M chip running at 72 MHZ should use a HWTC_DIVISOR of 2, while a 
 * faster chip require a higher HWTC_DIVISOR value. 
 *
 * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue
 * or the trace recorder library. Typically you should not need to change
 * the code of uiTracePortGetTimeStamp if using the HWTC macros.
 *
 * OFFER FROM PERCEPIO:
 * For silicon companies and non-corporate FreeRTOS users (researchers, students,
 * hobbyists or early-phase startups) we have an attractive offer: 
 * Provide a hardware timer port and get a FREE single-user licence for
 * FreeRTOS+Trace Professional Edition. Read more about this offer at 
 * www.percepio.se or contact us directly at support@percepio.se.
 *
 ******************************************************************************/

#if (SELECTED_PORT == PORT_Win32)
    
	#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (ulGetRunTimeCounterValue())
    #define HWTC_PERIOD 0
    #define HWTC_DIVISOR 1
	
#elif (SELECTED_PORT == PORT_HWIndependent)
    
	#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT 0
    #define HWTC_PERIOD 1
    #define HWTC_DIVISOR 1
	
#elif (SELECTED_PORT == PORT_Atmel_AT91SAM7)

    /* HWTC_PERIOD is hardcoded for AT91SAM7X256-EK Board (48 MHz)
	A more generic solution is to get the period from pxPIT->PITC_PIMR */
	
    #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (AT91C_BASE_PITC->PITC_PIIR & 0xFFFFF)
    #define HWTC_PERIOD 2995 
    #define HWTC_DIVISOR 1

#elif (SELECTED_PORT == PORT_ARM_CortexM)

	/* For all chips using ARM Cortex M cores */

    #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
    #define HWTC_COUNT (*((uint32_t*)0xE000E018))
    #define HWTC_PERIOD ((*(uint32_t*)0xE000E014) + 1)
    #define HWTC_DIVISOR 2

#elif (SELECTED_PORT == PORT_Renesas_RX600)	

    #include "iodefine.h"

    #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (CMT0.CMCNT)
    #define HWTC_PERIOD ((((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/8))
    #define HWTC_DIVISOR 1

#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_TMS570)	/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */

    #define RTIFRC0 *((uint32_t *)0xFFFFFC10)
    #define RTICOMP0 *((uint32_t *)0xFFFFFC50)
    #define RTIUDCP0 *((uint32_t *)0xFFFFFC54)
    #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (RTIFRC0 - (RTICOMP0 - RTIUDCP0))
    #define HWTC_PERIOD (RTIUDCP0)
    #define HWTC_DIVISOR 1

#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_MSP430) 
	/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */

    #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (TA0R)
    #define HWTC_PERIOD configCPU_CLOCKS_PER_TICK      
    #define HWTC_DIVISOR 1

#elif (SELECTED_PORT == PORT_MICROCHIP_PIC32) 	
	/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */

    #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (ReadTimer1())	 		/* Should be available in BSP */
    #define HWTC_PERIOD (ReadPeriod1()+1)		/* Should be available in BSP */
    #define HWTC_DIVISOR 1

#elif (SELECTED_PORT == PORT_MICROCHIP_dsPIC_AND_PIC24) 
	/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */

    #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
    #define HWTC_COUNT (PR1)
    #define HWTC_PERIOD ((configCPU_CLOCK_HZ/portTIMER_PRESCALE)/configTICK_RATE_HZ)
    #define HWTC_DIVISOR 1

#elif (SELECTED_PORT == PORT_XILINX_PPC405) 
	/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */

    #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
    #define HWTC_COUNT  mfspr( 0x3db)
    #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ )
    #define HWTC_DIVISOR 1    

#elif (SELECTED_PORT == PORT_XILINX_PPC440) 
	/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */

	/* This should work with most PowerPC chips */
	
    #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
    #define HWTC_COUNT  mfspr( 0x016 )
    #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ )
    #define HWTC_DIVISOR 1    

#else
    SELECTED_PORT is not set, or had unsupported value!
    (This is to intentionally cause a compiler error.)    
#endif

#ifndef HWTC_COUNT_DIRECTION
    HWTC_COUNT_DIRECTION is not set!
    (This is to intentionally cause a compiler error.)    
#endif 

#ifndef HWTC_COUNT
    HWTC_COUNT is not set!
    (This is to intentionally cause a compiler error.)    
#endif 

#ifndef HWTC_PERIOD
    HWTC_PERIOD is not set!
    (This is to intentionally cause a compiler error.)    
#endif 

#ifndef HWTC_DIVISOR
    HWTC_DIVISOR is not set!
    (This is to intentionally cause a compiler error.)    
#endif 

#ifndef IRQ_PRIORITY_ORDER
    IRQ_PRIORITY_ORDER is not set!
    (This is to intentionally cause a compiler error.)    
#endif 

#if (IRQ_PRIORITY_ORDER != 0) && (IRQ_PRIORITY_ORDER != 1)
    IRQ_PRIORITY_ORDER has bad value!
    (This is to intentionally cause a compiler error.)    
#endif 

#if (HWTC_DIVISOR < 1)
    HWTC_DIVISOR must be a non-zero positive value!
    (This is to intentionally cause a compiler error.)    
#endif 

#if ((IRQ_PRIORITY_ORDER != 0) && (IRQ_PRIORITY_ORDER != 1))
IRQ_PRIORITY_ORDER not set!
(This is to intentionally cause a compiler error.)
#endif

/*******************************************************************************
 * vTraceConsoleMessage
 *
 * A wrapper for your system-specific console "printf" console output function.
 * This needs to be correctly defined to see status reports from the trace 
 * status monitor task (this is defined in trcUser.c).
 ******************************************************************************/         
#define vTraceConsoleMessage printf

/*******************************************************************************
 * uiTracePortGetTimeStamp
 *
 * Returns the current time based on the HWTC macros which provide a hardware
 * isolation layer towards the hardware timer/counter.
 *
 * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue
 * or the trace recorder library. Typically you should not need to change
 * the code of uiTracePortGetTimeStamp if using the HWTC macros.
 *
 * OFFER FROM PERCEPIO:
 * For silicon companies and non-corporate FreeRTOS users (researchers, 
 * students, hobbyists or early-phase startups) we have an attractive offer: 
 * Provide a hardware timer port and get a FREE single-user licence for
 * FreeRTOS+Trace Professional Edition. Read more about this offer at 
 * www.percepio.se or contact us directly at support@percepio.se.
 ******************************************************************************/
uint32_t uiTracePortGetTimeStamp(void);

/*******************************************************************************
 * vTracePortSetFrequency
 *
 * Registers the frequency of the timer used. This is normally calculated 
 * automatically from the HWTC macros, but the Win32 port requires a special 
 * solution where the frequency can be set independently of the HWTC macros.
 * This is called from main in the Win32 demo program.
 ******************************************************************************/
void vTracePortSetFrequency(uint32_t freq);

/*******************************************************************************
 * vTracePortEnd
 * 
 * This function is called when the recorder is stopped due to full buffer.
 * Mainly intended to show a message in the console.
 * This is used by the Win32 port to store the trace to a file. The file path is
 * set using vTracePortSetFileName.
 ******************************************************************************/
void vTracePortEnd(void);

#if (INCLUDE_SAVE_TO_FILE == 1)

/*******************************************************************************
 * vTracePortSetOutFile
 *
 * Sets the filename/path used in vTracePortSave.
 * This is set in a separate function, since the Win32 port calls vTracePortSave
 * in vTracePortEnd if WIN32_PORT_SAVE_WHEN_STOPPED is set.
 ******************************************************************************/
void vTracePortSetOutFile(char* path);

/******************************************************************************
 * vTracePortSave
 *
 * Saves the trace to a file on a target-side file system. The path is set in a 
 * separate function, vTracePortSetOutFile, since the Win32 port may call
 * vTracePortSave in vTracePortEnd, if using WIN32_PORT_SAVE_WHEN_STOPPED.
 ******************************************************************************/
void vTracePortSave(void);

#endif

#endif