blob: 2e8ef7e8b97c347abcd1e27a0549575cdb22e893 [file] [log] [blame]
Changes between FreeRTOS V10.4.6 and FreeRTOS V10.5.0 released September 16 2022
Documentation and download available at https://www.FreeRTOS.org/
+ ARMv7-M and ARMv8-M MPU ports: It was possible for a third party that
already independently gained the ability to execute injected code to
read from or write to arbitrary addresses by passing a negative argument
as the xIndex parameter to pvTaskGetThreadLocalStoragePointer() or
vTaskSetThreadLocalStoragePointer respectively. A check has been added to
ensure that passing a negative argument as the xIndex parameter does not
cause arbitrary read or write.
We thank Certibit Consulting, LLC for reporting this issue.
+ ARMv7-M and ARMv8-M MPU ports: It was possible for an unprivileged task
to invoke any function with privilege by passing it as a parameter to
MPU_xTaskCreate, MPU_xTaskCreateStatic, MPU_xTimerCreate,
MPU_xTimerCreateStatic, or MPU_xTimerPendFunctionCall. MPU_xTaskCreate
and MPU_xTaskCreateStatic have been updated to only allow creation of
unprivileged tasks. MPU_xTimerCreate, MPU_xTimerCreateStatic and
MPU_xTimerPendFunctionCall APIs have been removed.
We thank Huazhong University of Science and Technology for reporting
this issue.
+ ARMv7-M and ARMv8-M MPU ports: It was possible for a third party that
already independently gained the ability to execute injected code to
achieve further privilege escalation by branching directly inside a
FreeRTOS MPU API wrapper function with a manually crafted stack frame.
The local stack variable `xRunningPrivileged` has been removed so that
a manually crafted stack frame cannot be used for privilege escalation
by branching directly inside a FreeRTOS MPU API wrapper.
We thank Certibit Consulting, LLC, Huazhong University of Science and
Technology and the SecLab team at Northeastern University for reporting
this issue.
+ ARMv7-M MPU ports: It was possible to configure overlapping memory
protection unit (MPU) regions such that an unprivileged task could access
privileged data. The kernel now uses highest numbered MPU regions for
kernel protections to prevent such MPU configurations.
We thank the SecLab team at Northeastern University for reporting this
issue.
+ Add support for ARM Cortex-M55.
+ Add support for ARM Cortex-M85. Contributed by @gbrtth.
+ Add vectored mode interrupt support to the RISC-V port.
+ Add support for RV32E extension (Embedded Profile) in RISC-V GCC port.
Contributed by @Limoto.
+ Heap improvements:
- Add a check to heap_2 to track if a memory block is allocated to
the application or not. The MSB of the size field is used for this
purpose. The same check already exists in heap_4 and heap_5. This
check prevents double free errors.
- Add a new flag configHEAP_CLEAR_MEMORY_ON_FREE to heap_2, heap_4
and heap_5. If the flag is set in FreeRTOSConfig.h then memory freed using
vPortFree() is automatically cleared to zero.
- Add a new API pvPortCalloc to heap_2, heap_4 and heap_5 which has the same
signature as the standard library calloc function.
- Update the pointer types to portPOINTER_SIZE_TYPE. Contributed by
@Octaviarius.
+ Add the ability to override send and receive completed callbacks for each
instance of a stream buffer or message buffer. Earlier there could be
one send and one receive callback for all instances of stream and message
buffers. Having separate callbacks per instance allows different message
and stream buffers to be used differently - for example, some for inter core
communication and others for same core communication.
The feature can be controlled by setting the configuration option
configUSE_SB_COMPLETED_CALLBACK in FreeRTOSConfig.h. When the option is set to 1,
APIs xStreamBufferCreateWithCallback() or xStreamBufferCreateStaticWithCallback()
(and likewise APIs for message buffer) can be used to create a stream buffer
or message buffer instance with application provided callback overrides. When
the option is set to 0, then the default callbacks as defined by
sbSEND_COMPLETED() and sbRECEIVE_COMPLETED() macros are invoked. To maintain
backwards compatibility, configUSE_SB_COMPLETED_CALLBACK defaults to 0. The
functionality is currently not supported for MPU enabled ports.
+ Generalize the FreeRTOS's Thread Local Storage (TLS) support so that it
is not tied to newlib and can be used with other c-runtime libraries also.
The default behavior for newlib support is kept same for backward
compatibility.
+ Add support to build and link FreeRTOS using CMake build system. Contributed
by @yhsb2k.
+ Add support to generate Software Bill of Materials (SBOM) for every release.
+ Add support for 16 MPU regions to the GCC Cortex-M33 ports.
+ Add ARM Cortex-M7 r0p0/r0p1 Errata 837070 workaround to ARM CM4 MPU ports.
The application writer needs to define configENABLE_ERRATA_837070_WORKAROUND
when using CM4 MPU ports on a Cortex-M7 r0p0/r0p1 core.
+ Add configSYSTICK_CLOCK_HZ to Cortex-M0 ports. This is needed to support
the case when the SysTick timer is not clocked from the same source as the CPU.
+ Add hardware stack protection support to MicroBlazeV9 port. This ensures that
the CPU immediately raises Stack Protection Violation exception as soon as any
task violates its stack limits. Contributed by @uecasm.
+ Introduce the configUSE_MINI_LIST_ITEM configuration option. When this
option is set to 1, ListItem_t and MiniLitItem_t remain separate types.
However, when configUSE_MINI_LIST_ITEM == 0, MiniLitItem_t and ListItem_t
are both typedefs of the same struct xLIST_ITEM. This addresses some issues
observed when strict-aliasing and link time optimization are enabled.
To maintain backwards compatibility, configUSE_MINI_LIST_ITEM defaults to 1.
+ Simplify prvInitialiseNewTask to memset newly allocated TCB structures
to zero, and remove code that set individual structure members to zero.
+ Add prototype for prvPortYieldFromISR to the POSIX port so that it builds
without any warning with -Wmissing-prototypes compiler option.
+ Add top of stack and end of stack to the task info report obtained using
vTaskGetInfo(). Contributed by @shreyasbharath.
+ Add a cap to the cRxLock and cTxLock members of the queue data structure.
These locks count the number items received and sent to the queue while
the queue was locked. These are later used to unblock tasks waiting on
the queue when the queue is unlocked. This PR caps the values of the
cRxLock and cTxLock to the number of tasks in the system because we cannot
unblock more tasks than there are in the system. Note that the same assert
could still be triggered is the application creates more than 127 tasks.
+ Changed uxAutoReload parameter in timer functions to xAutoReload. The
type is now BaseType_t. This matches the type of pdTRUE and pdFALSE.
The new function xTimerGetAutoReload() provides the auto-reload state as
a BaseType_t. The legacy function uxTimerGetAutoReload is retained with the
original UBaseType_t return value.
+ Fix support for user implementations of tickless idle that call
vTaskStepTick() with xExpectedIdleTime ticks to step. The new code
ensures xTickCount reaches xNextTaskUnblockTime inside xTaskIncrementTick()
instead of inside vTaskStepTick(). This fixes the typical case where a task
wakes up one tick late and a rare case assertion failure when xTickCount\
rolls over. Contributed by @jefftenney.
+ Fix deadlock in event groups when pvPortMalloc and vPortFree functions
are protected with a mutex. Contributed by @clemenskresser.
+ Fix a warning in tasks.c when compiled with -Wduplicated-branches
GCC option. Contributed by @pierrenoel-bouteville-act.
+ Fix compilation error in tasks.c when configSUPPORT_DYNAMIC_ALLOCATION
is set to zero. Contributed by @rdpoor.
+ Fix prvWriteMessageToBuffer() function in stream_buffer.c so that it correctly
copies length on big endian platforms too.
+ Remove the need for INCLUDE_vTaskSuspend to be set to 1
when configUSE_TICKLESS_IDLE is enabled. Contributed by @pramithkv.
+ Update the RL78 IAR port to the latest version of IAR which uses the
industry standard ELF format as opposed to earlier UBROF object format.
Contributed by @felipe-iar.
+ Add tick type is atomic flag when tick count is 16-bit to PIC24 port. This
allows the PIC24 family of 16 bit processors to read the tick count without
a critical section when the tick count is also 16 bits.
+ Fix offset-out-of-range errors for GCC CM3/CM4 mpu ports when
Link Time Optimization is enabled. Contributed by @niniemann.
+ Remove #error when RISC-V port is compiled on a 64-bit RISC-V platform.
Contributed by @cmdrf.
+ Fix ullPortInterruptNesting alignment in Cortex-A53 port so that it is
8-byte aligned. This fixes the unaligned access exception. Contributed
by @Atomar25.
+ Fix Interrupt Handler Register Function and Exception Process in NiosII
Port. Contributed by @ghost.
+ Change FreeRTOS IRQ Handler for Cortex-A53 SRE port to store and restore
interrupt acknowledge register. This ensures that the SRE port behavior
matches the Memory Mapped IO port. Contributed by @sviaunxp.
+ Update the uncrustify config file to match the version of the uncrustify
used in the CI Action. Also, pin the version of uncrustify in CI. Contributed
by @swaldhoer.
Changes between FreeRTOS V10.4.5 and FreeRTOS V10.4.6 released November 12 2021
+ ARMv7-M and ARMv8-M MPU ports – prevent non-kernel code from calling the
internal functions xPortRaisePrivilege and vPortResetPrivilege by changing
them to macros.
+ Introduce a new config configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS which
enables developers to prevent critical sections from unprivileged tasks.
It defaults to 1 for backward compatibility. Application should set it to
0 to disable critical sections from unprivileged tasks.
Changes between FreeRTOS V10.4.4 and FreeRTOS V10.4.5 released September 10 2021
See https://www.FreeRTOS.org/FreeRTOS-V10.4.5.html
+ Introduce configRUN_TIME_COUNTER_TYPE which enables developers to define
the type used to hold run time statistic counters. Defaults to uint32_t
for backward compatibility. #define configRUN_TIME_COUNTER_TYPE to a type
(for example, uint64_t) in FreeRTOSConfig.h to override the default.
+ Introduce ulTaskGetIdleRunTimePercent() to complement the pre-existing
ulTaskGetIdleRunTimeCounter(). Whereas the pre-existing function returns
the raw run time counter value, the new function returns the percentage of
the entire run time consumed by the idle task. Note the amount of idle
time is only a good measure of the slack time in a system if there are no
other tasks executing at the idle priority, tickless idle is not used, and
configIDLE_SHOULD_YIELD is set to 0.
+ ARMv8-M secure-side port: Tasks that call secure functions from the
non-secure side of an ARMv8-M MCU (ARM Cortex-M23 and Cortex-M33) have two
contexts - one on the non-secure side and one on the secure-side. Previous
versions of the FreeRTOS ARMv8-M secure-side ports allocated the structures
that reference secure-side contexts at run time. Now the structures are
allocated statically at compile time. The change necessitates the
introduction of the secureconfigMAX_SECURE_CONTEXTS configuration constant,
which sets the number of statically allocated secure contexts.
secureconfigMAX_SECURE_CONTEXTS defaults to 8 if left undefined.
Applications that only use FreeRTOS code on the non-secure side, such as
those running third-party code on the secure side, are not affected by
this change.
Changes between FreeRTOS V10.4.3 and FreeRTOS V10.4.4 released May 28 2021
+ Minor performance improvements to xTaskIncrementTick() achieved by providing
macro versions of uxListRemove() and vListInsertEnd().
+ Minor refactor of timers.c that obsoletes the need for the
tmrCOMMAND_START_DONT_TRACE macro and removes the need for timers.c to
post to its own event queue. A consequence of this change is that auto-
reload timers that miss their intended next execution time will execute
again immediately rather than executing again the next time the command
queue is processed. (thanks Jeff Tenney).
+ Fix a race condition in the message buffer implementation. The
underlying cause was that length and data bytes are written and read as
two distinct operations, which both modify the size of the buffer. If a
context switch occurs after adding or removing the length bytes, but
before adding or removing the data bytes, then another task may observe
the message buffer in an invalid state.
+ The xTaskCreate() and xTaskCreateStatic() functions accept a task priority
as an input parameter. The priority has always been silently capped to
(configMAX_PRIORITIES - 1) should it be set to a value above that priority.
Now values above that priority will also trigger a configASSERT() failure.
+ Replace configASSERT( pcQueueName ) in vQueueAddToRegistry with a NULL
pointer check.
+ Introduce the configSTACK_ALLOCATION_FROM_SEPARATE_HEAP configuration
constant that enables the stack allocated to tasks to come from a heap other
than the heap used by other memory allocations. This enables stacks to be
placed within special regions, such as fast tightly coupled memory.
+ If there is an attempt to add the same queue or semaphore handle to the
queue registry more than once then prior versions would create two separate
entries. Now if this is done the first entry is overwritten rather than
duplicated.
+ Update the ESP32 port and TF-M (Trusted Firmware M)code to the latest from
their respective repositories.
+ Correct a build error in the POSIX port.
+ Additional minor formatting updates, including replacing tabs with spaces
in more files.
+ Other minor updates include adding additional configASSERT() checks and
correcting and improving code comments.
+ Go look at the smp branch to see the progress towards the Symetric
Multiprocessing Kernel. https://github.com/FreeRTOS/FreeRTOS-Kernel/tree/smp
Changes between FreeRTOS V10.4.2 and FreeRTOS V10.4.3 released December 14 2020
V10.4.3 is included in the 202012.00 LTS release. Learn more at https:/freertos.org/lts-libraries.html
See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
+ Changes to improve robustness and consistency for buffer allocation in
the heap, queue and stream buffer.
+ The following functions can no longer be called from unprivileged code.
- xTaskCreateRestricted
- xTaskCreateRestrictedStatic
- vTaskAllocateMPURegions
Changes between FreeRTOS V10.4.1 and FreeRTOS V10.4.2 released November 10 2020
See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
+ Fix an issue in the ARMv8-M ports that caused BASEPRI to be masked
between the first task starting to execute and that task making
a FreeRTOS API call.
+ Introduced xTaskDelayUntil(), which is functionally equivalent to
vTaskDelayUntil(), with the addition of returning a value to
indicating whether or not the function placed the calling task into
the Blocked state or not.
+ Update WolfSSL to 4.5.0 and add the FIPS ready demo.
+ Add support for ESP IDF 4.2 to ThirdParty Xtensa port.
+ Re-introduce uxTopUsedPriority to support OpenOCD debugging.
+ Convert most dependent libraries in FreeRTOS/FreeRTOS to submodules.
+ Various general maintenance and improvements to MISRA compliance.
Changes between FreeRTOS V10.4.0 and FreeRTOS V10.4.1 released September 17 2020
See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
+ Fixed an incorrectly named parameter that prevented the
ulTaskNotifyTakeIndexed macro compiling, and the name space clash in the
test code that prevented this error causing test failures.
Changes between FreeRTOS V10.3.1 and FreeRTOS V10.4.0 released September 10 2020
See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
Major enhancements:
+ Task notifications: Prior to FreeRTOS V10.4.0 each created task had a
single direct to task notification. From FreeRTOS V10.4.0 each task has
an array of notifications. The direct to task notification API has been
extended with API functions postfixed with "Indexed" to enable the API to
operate on a task notification at any array index. See
https://www.freertos.org/RTOS-task-notifications.html for more information.
+ Kernel ports that support memory protection units (MPUs): The ARMv7-M and
ARMv8-M MPU ports now support a privilege access only heap. The ARMv7-M
MPU ports now support devices that have 16 MPU regions, have the ability
to override default memory attributes for privileged code and data
regions, and have the ability to place the FreeRTOS kernel code outside of
the Flash memory. The ARMv8-M MPU ports now support tickless idle mode.
See https://www.freertos.org/FreeRTOS-MPU-memory-protection-unit.html
for more information.
Additional noteworthy updates:
+ Code formatting is now automated to facilitate the increase in
collaborative development in Git. The auto-formated code is not identical
to the original formatting conventions. Most notably spaces are now used
in place of tabs.
+ The prototypes for callback functions (those that start with "Application",
such as vApplicationStackOverflowHook()) are now in the FreeRTOS header
files, removing the need for application writers to add prototypes into
the C files in which they define the functions.
+ New Renesas RXv3 port layer.
+ Updates to the Synopsys ARC code, including support for EM and HS cores,
and updated BSP.
+ Added new POSIX port layer that allows FreeRTOS to run on Linux hosts in
the same way the Windows port layer enables FreeRTOS to run on Windows
hosts.
+ Many other minor optimisations and enhancements. For full details
see https://github.com/FreeRTOS/FreeRTOS-Kernel/commits/main
Changes between FreeRTOS V10.3.0 and FreeRTOS V10.3.1 released February 18 2020
See https://www.FreeRTOS.org/FreeRTOS-V10.3.x.html
+ ./FreeRTOS-Labs directory was removed from this file. The libraries it
contained are now available as a separate download.
Changes between FreeRTOS V10.2.1 and FreeRTOS V10.3.0 released February 7 2020
See https://www.FreeRTOS.org/FreeRTOS-V10.3.x.html
New and updated kernel ports:
+ Added RISC-V port for the IAR compiler.
+ Update the Windows simulator port to use a synchronous object to prevent
a user reported error whereby a task continues to run for a short time
after being moved to the Blocked state. Note we were not able to
replicate the reported issue and it likely depends on your CPU model.
+ Correct alignment of stack top in RISC-V port when
configISR_STACK_SIZE_WORDS is defined to a non zero value, which causes
the interrupt stack to be statically allocated.
+ The RISC-V machine timer compare register can now be for any HART, whereas
previously it was always assumed FreeRTOS was running on HART 0.
+ Update the sequence used to update the 64-bit machine timer
compare register on 32-bit cores to match that suggested in RISC-V
documentation.
+ Added tickless low power modes into the ARM, IAR and GCC Cortex-M0 compiler
ports.
+ Updated the behaviour of the ARMv7-M MPU (Memory Protection Unit) ports to
match that of the ARMv8-M ports whereby privilege escalations can only
originate from within the kernel's own memory segment. Added
configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY configuration constant.
+ Update existing MPU ports to correctly disable the MPU before it is
updated.
+ Added contributed port and demo application for a T-Head (formally C-SKY)
microcontroller.
New API functions:
+ Added the vPortGetHeapStats() API function which returns information on
the heap_4 and heap_5 state.
+ Added xTaskCatchUpTicks(), which corrects the tick count value after the
application code has held interrupts disabled for an extended period.
+ Added xTaskNotifyValueClear() API function.
+ Added uxTimerGetReloadMode() API function.
Other miscellaneous changes:
+ Change type of uxPendedTicks from UBaseType_t to TickType_t to ensure it
has the same type as variables with which it is compared to, and therefore
also renamed the variable xPendingTicks.
+ Update Keil projects that use the MPU so memory regions come from linker
script (scatter file) variables instead of being hard coded.
+ Added LPC51U68 Cortex-M0+ demos for GCC (MCUXpresso), Keil and IAR
compilers.
+ Added CORTEX_MPU_STM32L4_Discovery_Keil_STM32Cube demo.
+ Added LPC54018 MPU demo.
+ Rename xTaskGetIdleRunTimeCounter() to ulTaskGetIdleRunTimeCounter().
Changes between FreeRTOS V10.2.1 and FreeRTOS V10.2.0 released May 13 2019:
+ Added ARM Cortex-M23 port layer to complement the pre-existing ARM
Cortex-M33 port layer.
+ The RISC-V port now automatically switches between 32-bit and 64-bit
cores.
+ Introduced the portMEMORY_BARRIER macro to prevent instruction re-ordering
when GCC link time optimisation is used.
+ Introduced the portDONT_DISCARD macro to the ARMv8-M ports to try and
prevent the secure side builds from removing symbols required by the
non secure side build.
+ Introduced the portARCH_NAME to provide additional data to select semi-
automated build environments.
+ Cortex-M33 and Cortex-M23 ports now correctly disable the MPU before
updating the MPU registers.
+ Added Nuvoton NuMaker-PFM-M2351 ARM Cortex-M23 demo.
+ Added LPC55S69 ARM Cortex-M33 demo.
+ Added an STM32 dual core AMP stress test demo.
Changes between FreeRTOS V10.1.1 and FreeRTOS V10.2.0 released February 25 2019:
+ Added GCC RISC-V MCU port with three separate demo applications.
+ Included pre-existing ARM Cortex-M33 (ARMv8-M) GCC/ARMclang and IAR ports
with Keil simulator demo.
+ Update the method used to detect if a timer is active. Previously the
timer was deemed to be inactive if it was not referenced from a list.
However, when a timer is updated it is temporarily removed from, then
re-added to a list, so now the timer's active status is stored separately.
+ Add vTimerSetReloadMode(), xTaskGetIdleRunTimeCounter(), and
xTaskGetApplicationTaskTagFromISR() API functions.
+ Updated third party Xtensa port so it is MIT licensed.
+ Added configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H to the Renesas
compiler RX600v2 port to enable switching between platform.h and
iodefine.h includes within that port's port.c file.
+ Removed the 'FromISR' functions from the MPU ports as ISRs run privileged
anyway.
+ Added uxTaskGetStackHighWaterMark2() function to enable the return type to
be changed without breaking backward compatibility.
uxTaskGetStackHighWaterMark() returns a UBaseType_t as always,
uxTaskGetStackHighWaterMark2() returns configSTACK_DEPTH_TYPE to allow the
user to determine the return type.
+ Fixed issues in memory protected ports related to different combinations
of static memory only and dynamic memory only builds. As a result the
definition of tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE became more
complex and was moved to FreeRTOS.h with a table explaining its definition.
+ Added a 'get task tag from ISR' function.
+ Change the method used to determine if a timer is active or not from just
seeing if it is referenced from the active timer list to storing its
active state explicitly. The change prevents the timer reporting that it
is inactive while it is being moved from one list to another.
+ The pcName parameter passed into the task create functions can be NULL,
previously a name had to be provided.
+ When using tickless idle, prvResetNextTaskUnblockTime() is now only called
in xTaskRemoveFromEventList() if the scheduler is not suspended.
+ Introduced portHAS_STACK_OVERFLOW_CHECKING, which should be set to 1 for
FreeRTOS ports that run on architectures that have stack limit registers.
Changes between FreeRTOS V10.1.0 and FreeRTOS V10.1.1 released 7 September 2018
+ Reverted a few structure name changes that broke several kernel aware
debugger plug-ins.
+ Updated to the latest trace recorder code.
+ Fixed some formatting in the FreeRTOS+TCP TCP/IP stack code.
+ Reverted moving some variables from file to function scope as doing so
broke debug scenarios that require the static qualifier to be removed.
Changes between FreeRTOS V10.0.1 and FreeRTOS V10.1.0 released 22 August 2018
FreeRTOS Kernel Changes:
+ Update lint checked MISRA compliance to use the latest MISRA standard, was
previously using the original MISRA standard.
+ Updated all object handles (TaskHandle_t, QueueHandle_t, etc.) to be
unique types instead of void pointers, improving type safety. (this was
attempted some years back but had to be backed out due to bugs in some
debuggers). Note this required the pvContainer member of a ListItem_t
struct to be renamed - set configENABLE_BACKWARD_COMPATIBILITY to 1 if
this causes an issue.
+ Added configUSE_POSIX_ERRNO to enable per task POSIX style errno
functionality in a more user friendly way - previously the generic thread
local storage feature was used for this purpose.
+ Added Xtensa port and demo application for the XCC compiler.
+ Changed the implementation of vPortEndScheduler() for the Win32 port to
simply call exit( 0 ).
+ Bug fix in vPortEnableInterrupt() for the GCC Microblaze port to protect
the read modify write access to an internal Microblaze register.
+ Fix minor niggles when the MPU is used with regards to prototype
differences, static struct size differences, etc.
+ The usStackHighWaterMark member of the TaskStatus_t structure now has type
configSTACK_DEPTH_TYPE in place of uint16_t - that change should have been
made when the configSTACK_DEPTH_TYPE type (which gets around the previous
16-bit limit on stack size specifications) was introduced.
+ Added the xMessageBufferNextLengthBytes() API function and likewise stream
buffer equivalent.
+ Introduce configMESSAGE_BUFFER_LENGTH_TYPE to allow the number of bytes
used to hold the length of a message in the message buffer to be reduced.
configMESSAGE_BUFFER_LENGTH_TYPE default to size_t, but if, for example,
messages can never be more than 255 bytes it could be set to uint8_t,
saving 3 bytes each time a message is written into the message buffer
(assuming sizeof( size_t ) is 4).
+ Updated the StaticTimer_t structure to ensure it matches the size of the
Timer_t structure when the size of TaskFunction_t does not equal the size
of void *.
+ Update various Xilinx demos to use 2018.1 version of the SDK tools.
+ Various updates to demo tasks to maintain test coverage.
+ FreeRTOS+UDP was removed in FreeRTOS V10.1.0 as it was replaced by
FreeRTOS+TCP, which was brought into the main download in FreeRTOS
V10.0.0. FreeRTOS+TCP can be configured as a UDP only stack, and
FreeRTOS+UDP does not contain the patches applied to FreeRTOS+TCP.
FreeRTOS+TCP Changes:
+ Multiple security improvements and fixes in packet parsing routines, DNS
caching, and TCP sequence number and ID generation.
+ Disable NBNS and LLMNR by default.
+ Add TCP hang protection by default.
We thank Ori Karliner of Zimperium zLabs Team for reporting these issues.
Changes between FreeRTOS V10.0.0 and FreeRTOS V10.0.1, released December 20 2017
+ Fix position of "#if defined( __cplusplus )" in stream_buffer.h.
+ Correct declarations of MPU_xQueuePeek() and MPU_xQueueSemaphoreTake() in
mpu_prototypes.h.
+ Correct formatting in vTaskList() helper function when it prints the state
of the currently executing task.
+ Introduce #error if stream_buffer.c is built without
configUSE_TASK_NOTIFICATIONS set to 1.
+ Update FreeRTOS+TCP to V2.0.0
- Improve the formatting of text that displays the available netword
interfaces when FreeRTOS+TCP is used on Windows with WinPCap.
- Introduce ipconfigSOCKET_HAS_USER_WAKE_CALLBACK option to enable a user
definable callback to execute when data arrives on a socket.
Changes between FreeRTOS V9.0.1 and FreeRTOS V10.0.0:
The FreeRTOS kernel is now MIT licensed: https://www.FreeRTOS.org/license
New Features and components:
+ Stream Buffers - see https://www.FreeRTOS.org/RTOS-stream-buffer-example.html
+ Message Buffers - see https://www.FreeRTOS.org//RTOS-message-buffer-example.html
+ Move FreeRTOS+TCP into the main repository, along with the basic Win32
TCP demo FreeRTOS_Plus_TCP_Minimal_Windows_Simulator.
New ports or demos:
+ Added demo for TI SimpleLink CC3220 MCU.
+ Added MPU and non MPU projects for Microchip CEC and MEC 17xx and 51xx
MCUs.
+ Added CORTEX_MPU_Static_Simulator_Keil_GCC demo to test static allocation
in the MPU port.
Fixes or enhancements:
+ Cortex-M ports push additional register prior to calling
vTaskSwitchContext to ensure 8-byte alignment is maintained. Only
important if a user defined tick hook function performs an operation that
requires 8-byte alignment.
+ Optimisations to the implementation of the standard tickless idle mode on
Cortex-M devices.
+ Improvements to the Win32 port including using higher priority threads.
+ Ensure interrupt stack alignment on PIC32 ports.
+ Updated GCC TriCore port to build with later compiler versions.
+ Update mpu_wrappers.c to support static allocation.
+ The uxNumberOfItems member of List_t is now volatile - solving an issue
when the IAR compiler was used with maximum optimization.
+ Introduced configRECORD_STACK_HIGH_ADDRESS. When set to 1 the stack start
address is saved into each task's TCB (assuming stack grows down).
+ Introduced configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H to allow user defined
functionality, and user defined initialisation, to be added to FreeRTOS's
tasks.c source file. When configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H is
set to 1 a user provided header file called freertos_task_c_additions.h
will be included at the bottom of tasks.c. Functions defined in that
header file can call freertos_tasks_c_additions_init(), which in turn
calls a macro called FREERTOS_TASKS_C_ADDITIONS_INIT(), if it is defined.
FREERTOS_TASKS_C_ADDITIONS_INIT() can be defined in FreeRTOSConfig.h.
+ Introduced configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING( x ) which can be
defined by a user in FreeRTOSConfig.h. The macro is called before
assessing whether to enter tickless idle mode or not. If the macro sets
x to zero then tickless idle mode will not be entered. This allows users
to abort tickless idle mode entry before the tickless idle function is
even called - previously it was only possible to abort from within the
tickless idle function itself.
+ Added configPRINTF(), which can be defined by users to allow all libraries
to use the same print formatter.
+ Introduced configMAX() and configMIN() macros which default to standard
max( x, y ) and min( x, y ) macro behaviour, but can be overridden if the
application writer defines the same macros in FreeRTOSConfig.h.
+ Corrected the definition of StaticTask_t in the case where
INCLUDE_xTaskAbortDelay is set to 1.
+ Introduced configTIMER_SERVICE_TASK_NAME and configIDLE_TASK_NAME, both of
which can be defined to strings in FreeRTOSConfig.h to change the default
names of the timer service and idle tasks respectively.
+ Only fill the stack of a newly created task with a known value if stack
checking, or high water mark checking/viewing, is in use - removing the
dependency on memset() in other cases.
+ Introduced xTaskCreateRestrictedStatic() so static allocation can be used
with the MPU.
+ Ensure suspended tasks cannot be unsuspended by a received task
notification.
+ Fix race condition in vTaskSetTimeOutState().
+ Updated trace recorder files to the latest version.
Changes since FreeRTOS V9.0.0:
+ Priority dis-inheritance behaviour has been enhanced in the case where a
task that attempted to take a mutex that was held by a lower priority task
timed out before it was able to obtain the mutex (causing the task that
holds the mutex to have its priority raised, then lowered again, in
accordance with the priority inheritance protocol).
+ Split the overloaded xQueueGenericReceive() function into three separate
dedicated functions.
+ Allow the default human readable text names given to the Idle and Timer
tasks to be overridden by defining the configIDLE_TASK_NAME and
configTIMER_SERVICE_TASK_NAME definitions respectively in FreeRTOSConfig.h.
+ Introduced configINITIAL_TICK_COUNT to allow the tick count to take a
value of than than 0 when the system boots. This can be useful for
testing purposes - although setting configUSE_16_BIT_TICKS to 1 can also
be used to test frequent tick overflows.
+ Ensure the Cortex-M SysTick count is cleared to zero before starting the
first task.
+ Add configASSERT() into ARM Cortex-M ports to check the number of priority
bit settings.
+ Clear the 'control' register before starting ARM Cortex-M4F ports in case
the FPU is used before the scheduler is started. This just saves a few
bytes on the main stack as it prevents space being left for a later save
of FPU registers.
+ Added xSemaphoreGetMutexHolderFromISR().
+ Corrected use of portNVIC_PENDSVSET to portNVIC_PENDSVSET_BIT in MPU ports.
+ Introduced configSTACK_DEPTH_TYPE to allow users to change the type used
to specify the stack size when using xTaskCreate(). For historic reasons,
when FreeRTOS was only used on small MCUs, the type was set to uint16_t,
but that can be too restrictive when FreeRTOS is used on larger
processors. configSTACK_DEPTH_TYPE defaults to uint16_t.
xTaskCreateStatic(), being a newer function, used a uint32_t.
+ Increase the priority of the Windows threads used by the Win32 port. As
all the threads run on the same core, and the threads run with very high
priority, there is a risk that the host will become unresponsive, so also
prevent the Windows port executing on single core hosts.
Changes between FreeRTOS V9.0.0 and FreeRTOS V9.0.0rc2 released May 25 2016:
See https://www.FreeRTOS.org/FreeRTOS-V9.html
RTOS kernel updates:
+ The prototype of the new xTaskCreateStatic() API function was modified to
remove a parameter and improve compatibility with other new
"CreateStatic()" API functions. The stack size parameter in
xTaskCreateStatic() is now uint32_t, which changes the prototype of the
callback functions. See the following URL:
https://www.FreeRTOS.org/xTaskCreateStatic.html
+ GCC ARM Cortex-A port: Introduced the configUSE_TASK_FPU_SUPPORT
constant. When configUSE_TASK_FPU_SUPPORT is set to 2 every task is
automatically given a floating point (FPU) context.
+ GCC ARM Cortex-A port: It is now possible to automatically save and
restore all floating point (FPU) registers on entry to each potentially
nested interrupt by defining vApplicationFPUSafeIRQHandler() instead of
vApplicationIRQHandler().
+ All ARM Cortex-M3/4F/7 ports: Clear the least significant bit of the task
entry address placed onto the stack of a task when the task is created for
strict compliance with the ARM Cortex-M3/4/7 architecture documentation
(no noticeable effect unless using the QMEU emulator).
+ Added GCC and Keil ARM Cortex-M4F MPU ports - previously the MPU was only
supported on ARM Cortex-M3.
+ ARM Cortex-M3/4F MPU ports: Update to fully support the FreeRTOS V9.0.0
API (other than static object creation) and added the
FreeRTOS/Demo/CORTEX_MPU_Simulator_Keil_GCC demo application to
demonstrate how to use the updated MPU port.
+ All ARM Cortex-M3/4F/7 ports: Add additional barrier instructions to the
default low power tickless implementation.
+ All ARM Cortex-M0 ports: Prevent an item being left on the stack of the
first task that executes.
+ Win32 ports: Reduce the amount of stack used and change the way Windows
threads are deleted to increase the maximum execution time.
+ Add an ARM Cortex-M4F port for the MikroC compiler. Ensure to read the
documentation page for this port before use.
+ MPS430X IAR port: Update to be compatible with the latest EW430 tools
release.
+ IAR32 GCC port: Correct vPortExitCritical() when
configMAX_API_CALL_INTERRUPT_PRIORITY == portMAX_PRIORITY.
+ For consistency vTaskGetTaskInfo() now has the alias vTaskGetInfo(),
xTaskGetTaskHandle() now has the alias xTaskGetHandle() and
pcQueueGetQueueName() now has an alias pcQueueGetName().
+ Fix various errors in comments and compiler warnings.
Demo application updates:
+ Update Atmel Studio projects to use Atmel Studio 7.
+ Update Xilinx SDK projects to use the 2016.1 version of the SDK.
+ Remove dependency on legacy IO libraries from the PIC32 demos.
+ Move the Xilinx UltraScale Cortex-R5 demo into the main distribution.
+ Update the MSP432 libraries to the latest version.
+ Add Microchip CEC1302 (ARM Cortex-M4F) demos for GCC, Keil and MikroC
compilers.
+ Move the Atmel SAMA5D2 demo into the main distribution.
Changes between FreeRTOS V9.0.0rc1 and FreeRTOS V9.0.0rc2 (release candidate 2)
released March 30 2016:
NOTE - See https://www.FreeRTOS.org/FreeRTOS-V9.html for details
+ The functions that create RTOS objects using static memory allocation have
been simplified and will not revert to using dynamic allocation if a
buffer is passed into a function as NULL.
+ Introduced the configSUPPORT_DYNAMIC_ALLOCATION configuration constant to
allow a FreeRTOS application to be built without a heap even being being
defined. The Win32 example located in the
/FreeRTOS/demo/WIN32-MSVC-Static-Allocation-Only directory is provided as
a reference for projects that do not include a FreeRTOS heap.
+ Minor run-time optimisations.
+ Two new low power tickless implementations that target Silicon Labs EFM32
microcontrollers.
+ Addition of the xTimerGetPeriod() and xTimerGetExpireTime() API functions.
Changes between FreeRTOS V8.2.3 and FreeRTOS V9.0.0rc1 (release candidate 1)
released February 19 2016:
RTOS Kernel Updates:
+ Major new feature - tasks, semaphores, queues, timers and event groups can
now be created using statically allocated memory, so without any calls to
pvPortMalloc().
+ Major new features - Added the xTaskAbortDelay() API function which allows
one task to force another task to immediately leave the Blocked state,
even if the event the blocked task is waiting for has not occurred, or the
blocked task's timeout has not expired.
+ Updates necessary to allow FreeRTOS to run on 64-bit architectures.
+ Added vApplicationDaemonTaskStartupHook() which executes when the RTOS
daemon task (which used to be called the timer service task) starts
running. This is useful if the application includes initialisation code
that would benefit from executing after the scheduler has been started.
+ Added the xTaskGetTaskHandle() API function, which obtains a task handle
from the task's name. xTaskGetTaskHandle() uses multiple string compare
operations, so it is recommended that it is called only once per task.
The handle returned by xTaskGetTaskHandle() can then be stored locally for
later re-use.
+ Added the pcQueueGetQueueName() API function, which obtains the name of
a queue from the queue's handle.
+ Tickless idling (for low power applications) can now also be used when
configUSE_PREEMPTION is 0.
+ If one task deletes another task, then the stack and TCB of the deleted
task is now freed immediately. If a task deletes itself, then the stack
and TCB of the deleted task are freed by the Idle task as before.
+ If a task notification is used to unblock a task from an ISR, but the
xHigherPriorityTaskWoken parameter is not used, then pend a context switch
that will then occur during the next tick interrupt.
+ Heap_1.c and Heap_2.c now use the configAPPLICATION_ALLOCATED_HEAP
settings, which previously was only used by heap_4.c.
configAPPLICATION_ALLOCATED_HEAP allows the application writer to declare
the array that will be used as the FreeRTOS heap, and in-so-doing, place
the heap at a specific memory location.
+ TaskStatus_t structures are used to obtain details of a task.
TaskStatus_t now includes the bae address of the task's stack.
+ Added the vTaskGetTaskInfo() API function, which returns a TaskStatus_t
structure that contains information about a single task. Previously this
information could only be obtained for all the tasks at once, as an array
of TaskStatus_t structures.
+ Added the uxSemaphoreGetCount() API function.
+ Replicate previous Cortex-M4F and Cortex-M7 optimisations in some
Cortex-M3 port layers.
Demo Application Updates:
Further demo applications will be added prior to the final FreeRTOS V9
release.
+ Updated SAM4L Atmel Studio project to use Atmel Studio 7.
+ Added ARM Cortex-A53 64-bit port.
+ Added a port and demo for the ARM Cortex-A53 64-bit cores on the Xilinx
Ultrascale MPSoC.
+ Added Cortex-M7 SAME70 GCC demo.
+ Added EFM32 Giant and Wonder Gecko demos.
Changes between V8.2.2 and V8.2.3 released October 16, 2015
RTOS kernel updates:
+ Fix bug identified in a modification made in V8.2.2 to the software timer
code that allows tickless low power applications to sleep indefinitely
when software timers are used.
+ Simplify and improve efficiency of stack overflow checking.
+ Add xTaskNotifyStateClear() API function.
+ New IAR and GCC Cortex-R ports for microprocessors that do not use an ARM
generic interrupt controller (GIC).
+ New PIC32MEC14xx port.
+ Add support for PIC32MZ EF parts (with floating point) into the PIC32MZ
port.
+ Zynq7000 port layer now declares the functions that setup and clear the
tick interrupt as weak symbols so they can be overridden by the
application, and uses a global XScuGic object so the same object can be
used by the application code.
+ Introduced configUSE_TASK_FPU_SUPPORT, although the PIC32MZ EF port is
currently the only port that uses it.
+ Updates to RL78 and 78K0 IAR port layers to improve support for
combinations of memory models.
+ Minor updates to heap_5.c to remove compiler warnings generated by some
compilers.
+ License simplifications. See /FreeRTOS/License/license.txt in the
official distribution.
FreeRTOS+ updates:
+ Update directory names to use WolfSSL instead of CyaSSL, inline with
WolfSSL's re-branding.
+ Update to latest WolfSSL code.
+ Update to latest FreeRTOS+Trace recorder code.
+ Add in the FreeRTOS+Trace recorder library required for streaming trace.
Demo application changes:
+ Add demo applications for Renesas RZ/T (Cortex-R), PIC32MZ EF (PIC32 with
floating point hardware), PIC32MEC14xx, RX71M, RX113 and RX231.
+ General tidy up of spelling and compiler warnings.
Changes between V8.2.1 and V8.2.2 released August 12, 2015
RTOS kernel updates:
+ Added Intel IA32/x86 32-bit port.
+ General maintenance.
+ PRIVILEGED_FUNCTION and PRIVILEGED_DATA macros, which are used in memory
protected systems, have been added to the newer event group and software
timer functions.
+ Add the errno definitions used by FreeRTOS+ components into projdefs.h.
+ Remove the restriction that prevented tick-less idle implementations
waiting indefinitely when software timers were used in the same
application.
+ Introduce xTaskNotifyAndQueryFromISR() as the interrupt safe version of
xTaskNotifyAndQuery().
+ Add additional NOPs to the MSP430X port layers to ensure strict compliance
with the hardware documentation.
+ Microblaze port: Added option for port optimised task selection.
+ Microblaze port: Previously tasks inherited the exception enable state
at the time the task was created. Now all tasks are created with
exceptions enabled if the Microblaze design supports exceptions.
+ Windows port: Add additional safe guards to ensure the correct start up
sequence and thread switching timing.
+ Windows port: Improve the implementation of the port optimised task
selection assembly code.
+ Update heap_4 and heap_5 to allow use on 64-bit processors.
+ Simplify the code that creates a queue.
+ General improved tick-less idle behaviour.
+ Ensure none of the variables in the common kernel files are initialised to
anything other than zero.
+ Correct calculation of xHeapStructSize in heap_4 and heap_5.
Demo application updates:
+ Added demo project for the new IA32/x86 port that targets the Galileo
hardware.
+ Added MSP430FR5969 demos (previously provided as a separate download).
+ Added FreeRTOS BSP repository for automatic creation of FreeRTOS
applications in the Xilinx SDK.
+ Added Atmel Studio / GCC project for the SAMV71 (ARM Cortex-M7)
+ Update Xilinx SDK projects to use version 2015.2 of the SDK.
+ Remove Microblaze demos that were using obsolete tools.
+ Add MSP43FR5969 IAR and CCS demos.
FreeRTOS+ Updates:
+ Updated FreeRTOS+Trace recorder library, which requires an update to the
FreeRTOS+Trace application.
+ Added Reliance Edge source code and demo application. Reliance edge is
a fail safe transactional file system ideal for applications that require
file storage, and especially when high reliability is essential.
+ Introduce configAPPLICATION_PROVIDES_cOutputBuffer to allow FreeRTOS+CLI
users to place the output buffer at a fixed memory address.
+ Improve the NetworkInterface.c file provided for the Windows port of
FreeRTOS+UDP.
Changes between V8.2.0 and V8.2.1 released 24th March 2015.
RTOS kernel updates:
+ Added user definable and flexible thread local storage facility.
+ Added vTimerSetTimerID() API function to complement the pvTimerGetTimerID()
function to allow the timer's ID to be used as timer local storage.
+ Fixed a potential issue related to the use of queue sets from an ISR.
+ Some updates to the Xilinx Microblaze GCC port.
+ Added ARM Cortex-M4F port for Texas Instruments Code Composer Studio.
+ Added ARM Cortex-M7 r0p1 port layer for IAR, GCC and Keil which contains a
minor errata work around. All other ARM Cortex-M7 core revisions should
use the ARM Cortex-M4F port.
+ Exclude the whole of croutine.c if configUSE_CO_ROUTINES is set to 0.
+ Change some data types from uint32_t to size_t in preparation for 64-bit
Windows port.
+ Update the PIC32 port to remove deprecation warnings output by the latest
XC32 compilers.
+ Fix bug when xQueueOverwrite() and xQueueOverwrite() from ISR are used to
overwrite items in two queues that are part of the same set.
Demo application updates:
+ Added demo application for TI's ARM Cortex-M4F based MSP432
microcontroller using IAR, Keil and CCS compilers.
+ Added demo application for STM32F ARM Cortex-M7 based microcontroller
using IAR and Keil.
+ Added demo application for Atmel SAMV71 ARM Cortex-M7 based
microcontroller using IAR and Keil.
+ Added Microblaze demo that uses the 2014.4 version of the Xilinx SDK and
runs on the KC705 evaluation board (Kintex FPGA).
Changes between V8.1.2 and V8.2.0 released 16th January 2015
Changes between release candidate 1 and the official release are restricted
to maintenance only.
Significant RTOS kernel updates:
+ MAJOR NEW FEATURE! Task notifications. Please see the following URL for
details: https://www.FreeRTOS.org/RTOS-task-notifications.html
+ NEW HEADER FILE REQUIRED! Obsolete definitions have been separated into
a new header file called FreeRTOS/Source/include/deprecated_definitions.h.
This header file must be present to build. Note some of the obsolete
definitions are still used by very old demo application projects.
Other RTOS kernel updates:
+ Made xSemaphoreGiveFromISR() a function rather than a macro that calls
xQueueGenericSendFromISR(). This allows for major performance
enhancements at the expense of some additional code size if both functions
are used in the same application. NOTE: In most uses cases such use of
a semaphore can now be replaced with a task notification which is smaller
and faster still.
+ The TCB is now always allocated such that the task's stack grows away from
the TCB (improves debugging of stack overflows as the overflow will not
overwrite the task's name).
+ GCC, IAR and Keil Cortex-M4F ports now use more inlining (performance
enhancements at the cost of a little additional code space).
+ Queues are now allocated with a single call to pvPortMalloc() which
allocates both the queue structure and the queue storage area.
+ Introduced a new critical section macro for reading the tick count that
defines away to nothing in cases where the width of the tick allows the
tick count to be read atomically (performance benefits - especially when
optimisation is on).
+ Introduced configAPPLICATION_ALLOCATED_HEAP in heap_4.c to allow the
application writer to provide their own heap array - and in so doing
control the location of the heap.
+ Introduced configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES which, when set, will
include known values in both list and list item structures. The values
are intended to assist debugging. If the values get overwritten then it
is likely application code has written over RAM used by the kernel.
+ configASSERT()s in all Cortex-M ports used to test the lowest 5 bits of
the interrupt control register to detect taskENTER_CRITICAL() being called
from an interrupt. This has been changed to test all 8 bits.
+ Introduced uxTaskPriorityGetFromISR().
+ Microblze V8 port now tests XPAR_MICROBLAZE_0_USE_FPU for inequality to 0
rather than equality to 1, and 2 and 3 are also valid values.
+ Cortex-A5 GIC-less port no longer passes the address of the interrupting
peripheral into the interrupt handler.
+ Fix an issue in FreeRTOS-MPU where an attempt was made to free the stack
belonging to a task when the task was deleted, even when the stack was
allocated statically.
+ Utility (helper) functions that format task statistic information into
human readable tables now pad task names with spaces to ensure columns
line up correctly even where task name lengths vary greatly.
+ Update FreeRTOS+Trace recorder library to version 2.7.0.
Demo application updates:
+ Added two new standard demo task sets: IntSemTest and TaskNotify.
+ Added port and demo application for Atmel SAMA5D4 Cortex-A5 MPU.
+ Added demo application for Altera Cyclone V Cortex-A9 MPU.
+ Updated Zynq demo to use version 2014.4 of Xilinx's SDK and added in
demo tasks for new RTOS features.
+ Updated Atmel SAM4E and SAM4S demos to include a lot of additional test
and demo tasks.
+ Fixed a corner case issue in Atmel SAM4L low power tickless
implementation, and added button interrupt handling.
+ Make the interrupt queue tests more tolerant to heave CPU loads.
+ Updated MSVC FreeRTOS simulator demo to include the latest standard test
and demo tasks.
+ Updated MingW/Eclipse FreeRTOS simulator demo to match the FreeRTOS MSVC
simulator demo.
+ Updated all demos that use FreeRTOS+Trace to work with the latest trace
recorder code.
Changes between V8.1.1 and V8.1.2 released September 2nd 2014
Move the defaulting of configUSE_PORT_OPTIMISED_TASK_SELECTION into the
individual port layers where necessary so it does not affect ports that do
not support the definition.
Changes between V8.1.0 and V8.1.1 released August 29th 2014
By popular requests - a minor patch to V8.1.0 to re-instate the ability to
give a mutex type semaphore (with priority inheritance) from an interrupt
handler.
Changes between V8.0.1 and V8.1.0 released August 26th 2014
FreeRTOS scheduler, kernel, demo and test updates:
+ Improved the priority inheritance algorithms to assist integration with
off the shelf middleware that may hold multiple mutexes simultaneously.
+ Introduce heap_5.c, which is similar to heap_4.c but allows the heap to
span multiple non-contiguous memory regions.
+ Updated all Cortex-A9 ports to help trap a couple of common usage errors -
the first being when a task incorrectly attempts to exit its implementing
function and the second being when a non interrupt safe API function is
called from an interrupt.
+ Update all Cortex-A9 ports to remove obsolete mode switches prior to
restoring a task context.
+ configUSE_PORT_OPTIMISED_TASK_SELECTION now defaults to 1 instead of 0.
+ Update all Cortex-M3/4F ports to trap a non interrupt safe API function
being called from an interrupt handler.
+ Simplify the alignment checks in heap_4.c.
+ Update the MSVC Windows simulator demo to use heap_5.c in place of
heap_4.c to ensure end users have an example to refer to.
+ Updated standard demo test code to test the new priority inheritance
algorithms.
+ Updated the standard demo tasks to make use of stdint and the FreeRTOS
specific typedefs that were introduced in FreeRTOS V8.0.0.
+ Introduce the pdMS_TO_TICKS() macro as a more user friendly and intuitive
alternative to pdTICKS_PER_MS - both of which can be used to convert a
time specified in milliseconds to a time specified in RTOS ticks.
+ Fix a bug in the Tasking compiler's Cortex-M port that resulted in an
incorrect value being written to the basepri register. This only effects
users of the Tasking compiler.
+ Update the Zynq demo to use version 2014.2 of the SDK and add in an lwIP
example that demonstrates lwIP being used with both its raw and sockets
interfaces.
+ Updated the CCS Cortex-R4 port to enable it to be built with the latest
CCS compiler.
New ports and demo applications:
+ Two Renesas RX64M ports (RXv2 core) and demos introduced, one for the GCC
compiler and one for the Renesas compiler. Both demos use e2 studio.
+ Generic IAR Cortex-A5 port (without any reliance on a GIC) introduced.
The new port is demonstrated on an Atmel SAMA5D3 XPlained board.
FreeRTOS+ component updates:
+ Update CyaSSL to the latest version.
+ Updated the FreeRTOS+ components supplied directly by Real Time Engineers
Ltd. to make use of stdint and the FreeRTOS specific typedefs that were
introduced in FreeRTOS V8.0.0.
+ Rework and simplify the FreeRTOS+FAT SL RAM disk driver.
Miscellaneous updates and maintenance:
+ Update the IAR and DS-5/ARM RZ demos to target the official RZ RSK
hardware in place of the previously targeted Renesas internal (not
publicly available) hardware.
+ Various other maintenance tasks.
Changes between V8.0.0 and V8.0.1 released 2nd May 2014
+ Minor fixes to the event group functionality that was released in V8.0.0.
The 'clear bits from ISR' functionality is now implemented using a
deferred interrupt callback instead of a function, and the 'wait bits' and
'task sync' functions now correctly clear internal control bits before
returning a value in every possible path through the respective functions.
+ Ensure the updating of internal control data is protected by a critical
section after a task is deleted or suspended.
+ Minor fixes to FreeRTOS+FAT SL - namely seeking beyond the end of a file
when the offset was not a multiple of the sector size.
+ Ensure Cortex-A9 system registers are only ever accessed as 32-bit values,
even when only the lest significant byte of the register is implemented.
Other updates:
+ Updated the XMC4200 IAR project so it links with version 7.x of the IAR
tools.
+ Add RL78L1C demo.
+ Add pcTimerGetName() API function.
+ Call _reclaim_reent() when a task is deleted if configUSE_NEWLIB_REENTRANT
is defined.
Changes between V7.6.0 and V8.0.0 released 19th Feb 2014
https://www.FreeRTOS.org/upgrading-to-FreeRTOS-V8.html
FreeRTOS V8.x.x is a drop-in compatible replacement for FreeRTOS V7.x.x,
although a change to the type used to reference character strings may result
in application code generating a few (easily clearable) compiler warnings
after the upgrade, and an updated typedef naming convention means use of the
old typedef names is now discouraged.
See https://www.FreeRTOS.org/upgrading-to-FreeRTOS-V8.html for full
information.
New features and functionality:
+ Event groups - see https://www.FreeRTOS.org/FreeRTOS-Event-Groups.html
+ Centralised deferred interrupt processing - see
https://www.FreeRTOS.org/xTimerPendFunctionCallFromISR.html
Other updates:
+ Previously, when a task left the Blocked state, a context switch was
performed if the priority of the unblocked task was greater than or equal
to the priority of the Running task. Now a context switch is only
performed if the priority of the unblocked task is greater than the
priority of the Running task.
+ New low power tickless demonstration project that targets the ST STM32L
microcontroller - see
https://www.FreeRTOS.org/STM32L-discovery-low-power-tickless-RTOS-demo.html
+ Add xPortGetMinimumEverFreeHeapSize() to heap_4.c.
+ Small change to the tickless low power implementation on the SAM4L to
ensure the alarm value (compare match value) cannot be set to zero when a
tickless period is exited due to an interrupt originating from a source
other than the RTOS tick.
+ Update the GCC/Eclipse Win32 simulator demo to make better use of Eclipse
resource filters and match the functionality of the MSVC equivalent.
+ xTaskIsTaskSuspended() is no longer a public function. Use
eTaskGetState() in its place.
+ Improved trace macros, including tracing of heap usage.
+ Remove one level of indirection when accepting interrupts on the PIC32MZ.
+ Add Cortex-A9 GCC port layer.
+ Add Xilinx Zynq demo application.
Changes between V7.5.3 and V7.6.0 released 18th November 2013
V7.6.0 changes some behaviour when the co-operative scheduler is used (when
configUSE_PREEMPTION is set to 0). It is important to note that the
behaviour of the pre-emptive scheduler is unchanged - the following
description only applies when configUSE_PREEMPTION is set to 0:
WHEN configUSE_PREEMPTION IS SET TO 0 (which is in a small minority of
cases) a context switch will now only occur when a task places itself into
the Blocked state, or explicitly calls taskYIELD(). This differs from
previous versions, where a context switch would also occur when implicitly
moving a higher priority task out of the Blocked state. For example,
previously, WHEN PREEMPTION WAS TURNED OFF, if task A unblocks task B by
writing to a queue, then the scheduler would switch to the higher priority
task. Now, WHEN PREEMPTION IS TURNED OFF, if task A unblocks task B by
writing to a queue, task B will not start running until task A enters the
Blocked state or task A calls taskYIELD(). [If configUSE_PREEMPTION is not
set to 0, so the normal pre-emptive scheduler is being used, then task B
will start running immediately that it is moved out of the Blocked state].
Other changes:
+ Added a port layer and a demo project for the new PIC32MZ architecture.
+ Update the PIC32MX port layer to re-introduce some ehb instructions that
were previously removed, add the ability to catch interrupt stack
overflows (previously only task stack overflows were trapped), and also
add the ability to catch an application task incorrectly attempting to
return from its implementing function.
+ Make dramatic improvements to the performance of the Win32 simulator port
layer.
+ Ensure tasks that are blocked indefinitely report their state as Blocked
instead of Suspended.
+ Slight improvement to the Cortex-M4F port layers where previously one
register was inadvertently being saved twice.
+ Introduce the xSemaphoreCreateBinary() API function to ensure consistency
in the semantics of how each semaphore type is created. It is no longer
recommended to use vSemaphoreCreateBinary() (the version prefixed with a
'v'), although it will remain in the code for backward compatibility.
+ Update the Cortex-M0 port layers to allow the scheduler to be started
without using the SVC handler.
+ Added a build configuration to the PIC32MX MPLAB X demo project that
targets the PIC32 USB II starter kit. Previously all the build
configurations required the Explorer 16 hardware.
+ Some of the standard demo tasks have been updated to ensure they execute
correctly with the updated co-operative scheduling behaviour.
+ Added comprehensive demo for the Atmel SAM4E, including use of
FreeRTOS+UDP, FreeRTOS+FAT SL and FreeRTOS+CLI.
FreeRTOS+ Changes:
+ Minor maintenance on FreeRTOS+UDP.
Changes between V7.5.2 and V7.5.3 released October 14 2013
Kernel changes:
+ Prior to V7.5.x yields requested from the tick hook would occur in the
same tick interrupt - revert to that original behaviour.
+ New API function uxQueueSpacesAvailable().
+ Introduced the prvTaskExitError() function to Cortex-M0, Cortex-M3/4
and Cortex-M4F ports. prvTaskExitError() is used to trap tasks that
attempt to return from their implementing functions (tasks should call
vTaskDelete( NULL ); if they want to exit).
+ The Cortex-M0 version of portSET_INTERRUPT_MASK_FROM_ISR and
portCLEAR_INTERRUPT_MASK_FROM_ISR are now fully nestable.
+ Improved behaviour and robustness of the default Cortex-M tickless idle
behaviour.
+ Add workaround for silicon errata PMU_CM001 in Infineon XMC4000 devices to
all Cortex-M4F ports.
+ Add Cortex-M0 port for Keil.
+ Updated Cortus port.
+ Ensure _impure_ptr is initialised before the scheduler is started.
Previously it was not set until the first context switch.
FreeRTOS+ changes:
+ Update FreeRTOS+UDP to V1.0.1 - including direct integration of the
FreeRTOS+Nabto task, improvements to the DHCP behaviour, and a correction
to the test that prevents the network event hook being called on the first
network down event. The FreeRTOS+UDP change history is maintained
separately.
+ Correct the __NVIC_PRIO_BITS setting in the LPC18xx.h header files
provided in the NXP CMSIS library, then update the interrupts used by the
LPC18xx demos accordingly.
+ Replace double quotes (") with single quotes (') in FreeRTOS+CLI help
strings to ensure the strings can be used with the JSON descriptions used
in the FreeRTOS+Nabto demos.
Demo and miscellaneous changes:
+ Added demo for the Atmel SAMD20 Cortex-M0+. The demo includes
FreeRTOS+CLI
+ Added a demo for the Infineon Cortex-M0 that can be built with the IAR
Keil and GCC tools.
+ Updated the Infineon XMC4000 demos for IAR, Keil, GCC and Tasking tools,
with additional build configurations to directly support the XMC4200 and
XMC4400 devices, in addition to the previously supported XMC4500.
+ Updated the demo application.
+ Added additional trace macros traceMALLOC and traceFREE to track heap
usage.
Changes between V7.5.0 and V7.5.2 released July 24 2013
V7.5.2 makes the new Cortex-M vPortCheckInterruptPriority() function
compatible with the STM32 standard peripheral driver library, and adds
an extra critical section to the default low power tickless mode
implementation. Only users of the STM32 peripheral library or the default
tickless implementation need update from version 7.5.0.
Changes between V7.4.2 and V7.5.0 released July 19 2013
V7.5.0 is a major upgrade that includes multiple scheduling and efficiency
improvements, and some new API functions.
Compatibility information for FreeRTOS users:
FreeRTOS V7.5.0 is backward compatible with FreeRTOS V7.4.0 with one
exception; the vTaskList() and vTaskGetRunTimeStats() functions are now
considered legacy, having been replaced by the single uxTaskGetSystemState()
function. configUSE_STATS_FORMATTING_FUNCTIONS must be set to 1 in
FreeRTOSConfig.h for vTaskList() and vTaskGetRunTimeStats() to be
available.
Compatibility information for FreeRTOS port writers:
vTaskIncrementTick() is now called xTaskIncrementTick() (because it now
returns a value).
Headline changes:
+ Multiple scheduling and efficiency improvements.
+ Core kernel files now pass PC-Lint V8 static checking without outputting
any warnings (information on the test conditions will follow).
New API functions:
+ uxTaskGetSystemState() https://www.FreeRTOS.org/uxTaskGetSystemState.html
+ xQueueOverwrite() https://www.FreeRTOS.org/xQueueOverwrite.html
+ xQueueOverwriteFromISR()
+ xQueuePeekFromISR()
The following ports and demos, which were previously available separately,
are now incorporated into the main FreeRTOS zip file download:
+ ARM Cortex-A9 IAR
+ ARM Cortex-A9 ARM compiler
+ Renesas RZ
+ Microsemi SmartFusion2
New FreeRTOSConfig.h settings
https://freertos.org/a00110.html
+ configUSE_TIME_SLICING
+ configUSE_NEWLIB_REENTRANT
+ configUSE_STATS_FORMATTING_FUNCTIONS
+ configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS
Other changes:
+ (MPU port only) The configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS
options provides a mechanism that allows application writers to execute
certain functions in privileged mode even when a task is running in user
mode.
+ Ports that support interrupt nesting now include a configASSERT() that
will trigger if an interrupt safe FreeRTOS function is called from an
interrupt that has a priority designated as above the maximum system/API
call interrupt priority.
+ The included FreeRTOS+Trace recorder code has been updated to the latest
version, and the demo applications that use the trace recorder code have
been updated accordingly.
+ The FreeRTOS Windows Simulator (MSVC version only) has been updated to
include a new basic 'blinky' build option in addition to the original
comprehensive build option.
+ Improve RAM usage efficiency of heap_4.c and heap_2.c.
+ Prevent heap_4.c from attempting to free memory blocks that were not
allocated by heap_4.c, or have already been freed.
+ As FreeRTOS now comes with FreeRTOS+FAT SL (donated by HCC) the Chan FATfs
files have been removed from FreeRTOS/Demo/Common.
+ Fix build error when R4 port is build in co-operative mode.
+ Multiple port and demo application maintenance activities.
Changes between V7.4.1 and V7.4.2 released May 1 2013
NOTE: There are no changes in the FreeRTOS kernel between V7.4.1 and V7.4.2
+ Added FreeRTOS+FAT SL source code and demo project. The demo project
runs in the FreeRTOS Windows simulator for easy and hardware independent
experimentation and evaluation. See https://www.FreeRTOS.org/fat_sl
Changes between V7.4.0 and V7.4.1 released April 18 2013
+ To ensure strict conformance with the spec and ensure compatibility with
future chips data and instruction barrier instructions have been added to
the yield macros of Cortex-M and Cortex-R port layers. For efficiency
the Cortex-M port layer "yield" and "yield" from ISR are now implemented
separately as the barrier instructions are not required in the ISR case.
+ Added FreeRTOS+UDP into main download.
+ Reorganised the FreeRTOS+ directory so it now matches the FreeRTOS
directory with Source and Demo subdirectories.
+ Implemented the Berkeley sockets select() function in FreeRTOS+UDP.
+ Changed (unsigned) casting in calls to standard library functions with
(size_t) casting.
+ Added the Atmel SAM4L and Renesas RX100 demos that demonstrates the
tickless (tick suppression) low power FreeRTOS features.
+ Add a new RL78 IAR demo that targets numerous new RL78 chips and
evaluation boards.
+ Adjusted stack alignment on RX200 ports to ensure an assert was not
falsely triggered when configASSERT() is defined.
+ Updated the Cortex_M4F_Infineon_XMC4500_IAR demo to build with the latest
version of EWARM.
+ Corrected header comments in the het.c and het.h files (RM48/TMS570 demo).
Changes between V7.3.0 and V7.4.0 released February 20 2013
+ New feature: Queue sets. See:
https://www.FreeRTOS.org/Pend-on-multiple-rtos-objects.html
+ Overhauled the default tickless idle mode implementation provided with the
ARM Cortex-M3 port layers.
+ Enhanced tickless support in the core kernel code with the introduction of
the configEXPECTED_IDLE_TIME_BEFORE_SLEEP macro and the
eTaskConfirmSleepModeStatus() function.
+ Added the QueueSet.c common demo/test file. Several demo applications
have been updated to use the new demo/test tasks.
+ Removed reliance on the PLIB libraries from the MPLAB PIC32 port layer and
demo applications.
+ Added the FreeRTOS+Trace recorder code to the MSVC Win32 demo.
+ Renamed eTaskStateGet() to eTaskGetState() for consistency, and added a
pre-processor macro for backward compatibility with the previous name.
+ Updated functions implemented in the core queue.c source file to allow
queue.h to be included from the .c file directly (this prevents compiler
warnings that were generated by some compilers).
+ Updated the CCS Cortex-R4 port layer to replace the CLZ assembler function
with the CLZ compiler intrinsic that is provided by the latest versions of
the CCS ARM compiler.
+ Updated all heap_x.c implementations to replace the structure that was
used to ensure the start of the heap was aligned with a more portable
direct C code implementation.
+ Added support for PIC24 devices that include EDS.
+ Minor optimisations to the PIC32 port layer.
+ Minor changes to tasks.c that allow the state viewer plug-ins to display
additional information.
+ Bug fix: Update prvProcessReceivedCommands() in timers.c to remove an
issue that could occur if the priority of the timer daemon task was set
below the priority of tasks that used timer services.
+ Update the FreeRTOS+Trace recorder code to the latest version.
Changes between V7.2.0 and V7.3.0 released October 31 2012
+ Added ability to override the default scheduler task selection mechanism
with implementations that make use of architecture specific instructions.
+ Added ability to suppress tick interrupts during idle time, and in so
doing, provide the ability to make use of architecture specific low power
functionality.
+ Added the portSUPPRESS_TICKS_AND_SLEEP() macro and vTaskStepTick() helper
function.
+ Added the configSYSTICK_CLOCK_HZ configuration constant.
+ Reworked the Cortex-M3 and Cortex-M4F port layers for GCC, Keil and IAR to
directly support basic power saving functionality.
+ Added hooks to allow basic power saving to be augmented in the application
by making use of chip specific functionality.
+ Minor change to allow mutex type semaphores to be used from interrupts
(which would not be a normal usage model for a mutex).
+ Change the behaviour of the interrupt safe interrupt mask save and restore
macros in the Cortex-M ports. The save macro now returns the previous
mask value. The restore macro now uses the previous mask value. These
changes are not necessary for the kernel's own implementation, and are
made purely because the macros were being used by application writers.
+ Added eTaskStateGet() API function.
+ Added port specific optimisations to the PIC32 port layer, and updated the
PIC32 demo applications to make use of this new feature.
+ Added port specific optimisations to the Win32 simulator port.
+ Added new ports and demo applications for the TI Hercules RM48 and TMS570
safety microcontrollers.
+ Added SAM3 demos targeting the ATSAM3S-EK2 and ATSAM3X-EK evaluation
boards.
+ Updated the PIC32 MPLAB X project to manually set the compiler include
paths instead of using the IDE entry box following reports that the
include paths were somehow being deleted.
+ Improved character handling in FreeRTOS+CLI.
Changes between V7.1.1 and V7.2.0 released 14 August 2012
FreeRTOS V7.2.0 is backward compatible with FreeRTOS V7.1.2.
+ Added a FreeRTOS+ sub-directory. The directory contains some FreeRTOS+
source code, and example projects that use the FreeRTOS Win32 simulator.
+ Added a new example heap allocation implementation (heap_4.c) that
includes memory block coalescence.
+ Added a demo that targets the Atmel SAM4S Cortex-M4 based microcontroller.
The demo is preconfigured to build using the free Atmel Studio 6 IDE and
GCC compiler.
+ Added xSemaphoreTakeFromISR() implementation.
+ The last parameter in ISR safe FreeRTOS queue and semaphore functions
(xHigherPriorityTaskWoken) is now optional and can be set to NULL if it
is not required.
+ Update the IAR and MSP430X ports to clear all lower power mode bits before
exiting the tick interrupt [bug fix].
+ Allow xQueueReset() to be used, even when the queues event lists are not
empty.
+ Added a vQueueDelete() handler for the FreeRTOS MPU port (this was
previously missing).
+ Updated the vPortSVCHandler() functions in the FreeRTOS MPU port layer to
ensure it compiles with the latest ARM GCC compilers from Linaro.
+ Updated the prvReadGP() function in the NIOS II port to ensure the compiler
can choose any register for the functions parameter (required at high
compiler optimisation levels).
+ Add #error macros into the Keil and IAR Cortex-M ports to ensure they
cannot be built if the user has set configMAX_SYSCALL_INTERRUPT_PRIORITY
to 0.
+ Added comments in the FreeRTOSConfig.h files associated with Cortex-M3 and
Cortex-M4 demos stating that the configMAX_SYSCALL_INTERRUPT_PRIORITY
parameter must not be set to 0.
+ Introduce new INCLUDE_xQueueGetMutexHolder configuration constant
(defaulted to 0).
+ Added two new list handling macros - for internal use only in upcoming new
products.
+ Removed all mention of the legacy vTaskStartTrace and ulTaskEndTrace
macros. FreeRTOS+Trace supersedes the legacy trace.
+ Added a configASSERT() into the vPortFree() function in heap_1.c as it is
invalid for the function to be called.
+ Made the xRxLock and xTxLock members of the queue structure volatile.
This is probably not necessary, and is included as a precautionary
measure.
+ Modify the assert() that checks to see if the priority passed into an
xTaskCreate() function is within valid bounds to permit the assert to be
used in the FreeRTOS MPU port.
+ The software timer service (daemon) task is now created in a way that
to ensure compatibility with FreeRTOS MPU.
Changes between V7.1.0 and V7.1.1 released May 1 2012
New ports:
The following ports are brand new:
+ Cortex-M3 Tasking
The following ports have been available as separate downloads for a number
of months, but are now included in the main FreeRTOS download.
+ Cortex-M0 IAR
+ Cortex-M0 GCC
+ Cortex-M4F GCC (with full floating point support)
New demos:
The following demos are brand new:
+ Renesas RX63N RDK (Renesas compiler)
The following demos have been available as separate downloads for a number
of months, but are now included in the main FreeRTOS download.
+ NXP LPC1114 GCC/LPCXpresso
+ ST STM32F0518 IAR
+ Infineon XMC4500 GCC/Atollic
+ Infineon XMC4500 IAR
+ Infineon XMC4500 Keil
+ Infineon XMC4500 Tasking
Kernel miscellaneous / maintenance:
+ Introduced the portSETUP_TCB() macro to remove the requirement for the
Windows simulator to use the traceTASK_CREATE() macro, leaving the trace
macro available for use by FreeRTOS+Trace (https://www.FreeRTOS.org/trace).
+ Added a new trace macro, traceMOVE_TASK_TO_READY_STATE(), to allow future
FreeRTOS+Trace versions to provide even more information to users.
+ Updated the FreeRTOS MPU port to be correct for changes that were
introduced in FreeRTOS V7.1.0.
+ Introduced the xQueueReset() API function.
+ Introduced the xSemaphoreGetMutexHolder() API function.
+ Tidy up various port implementations to add the static key word where
appropriate, and remove obsolete code.
+ Slight change to the initial stack frame given to the RX600 ports to allow
them to be used in the Eclipse based E2Studio IDE without confusing GDB.
+ Correct the alignment given to the initial stack of Cortex-M4F tasks.
+ Added a NOP following each DINT instruction on MSP430 devices for strict
conformance with the instructions on using DINT.
+ Changed the implementation of thread deletes in the Win32 port to prevent
the port making use of the traceTASK_DELETE() trace macros - leaving this
macro free for use by FreeRTOS+Trace.
+ Made some benign changes to the RX600 Renesas compiler port layer to
ensure the code can be built to a library without essential code being
removed by the linker.
+ Reverted the change in the name of the uxTaskNumber variable made in
V7.1.0 as it broke the IAR plug-in.
Demo miscellaneous / maintenance:
+ The command interpreter has now been formally released as FreeRTOS+CLI,
and been moved out of the main FreeRTOS download, to instead be available
from the FreeRTOS+ Ecosystem site https://www.FreeRTOS.org/plus.
+ flash_timer.c/h has been added to the list of standard demo tasks. This
performs the same functionality as the flash.c tasks, but using software
timers in place of tasks.
+ Upgraded the PIC32 demo as follows: Changes to how the library functions
are called necessitated by the new compiler version, addition of MPLAB X
project with PIC32MX360, PIC32MX460 and PIC32MX795 configurations,
addition of simply blinky demo, updated FreeRTOSConfig.h to include more
parameters, addition of hook function stubs.
+ The MSP430X IAR and CCS demos have been updated to ensure the power
settings are correct for the configured CPU frequency.
+ Rowley CrossWorks projects have been updated to correct the "multiple
definition of ..." warnings introduced when the toolchain was updated.
+ Updated various FreeRTOSConfig.h header files associated with projects
that build with Eclipse to include a #error statement informing the user
that the CreateProjectDirectoryStructure.bat batch file needs to be
executed before the projects can be opened.
+ Renamed directories that included "CCS4" in their name to remove the '4'
and instead just be "CCS". This is because the demo was updated and
tested to also work with later Code Composer Studio versions.
+ Updated the TCP/IP periodic timer frequency in numerous uIP demos to be
50ms instead of 500ms.
Changes between V7.0.2 and V7.1.0 released December 13 2011
New ports:
+ Cortex-M4F IAR port.
+ Cortex-M4F Keil/RVDS port.
+ TriCore GCC port.
New demos:
+ NXP LPC4350 using the Keil MDK, and demonstrated on a Hitex development
board.
+ ST STM32F407 using the IAR Embedded Workbench for ARM, and demonstrated on
the IAR STM32F407ZG-SK starter kit.
+ Infineon TriCore TC1782, using the GCC compiler, demonstrated on the
TriBoard TC1782 evaluation board.
+ Renesas RX630, using the Renesas compiler and HEW, demonstrated on an
RX630 RSK (Renesas Starter Kit).
Miscellaneous / maintenance:
+ Removed all calls to printf() from the K60/IAR Kinetis demo so the project
can execute stand alone - without being connected to the debugger.
+ Completed the command interpreter framework. Command handlers now receive
the entire command string, giving them direct access to parameters.
Utility functions are provided to check the number of parameters, and
return parameter sub-strings.
+ The previously documented fix for the bug in xTaskResumeFromISR() that
effected (only) ports supporting interrupt nesting has now been
incorporated into the main release.
+ The portALIGNMENT_ASSERT_pxCurrentTCB() definition has been added to allow
specific ports to skip the second stack alignment check when a task is
created. This is because the second check is not appropriate for some
ports - including the new TriCore port where the checked pointer does not
actually point to a stack.
+ The portCLEAN_UP_TCB() macro has been added to allow port specific clean
up when a task is deleted - again this is required by the TriCore port.
+ Various other minor changes to ensure warning free builds on a growing
number of microcontroller and toolchain platforms. This includes a
(benign) correction to the prototype of the
vApplicationStackOverflowHook() definition found in lots of recent demos.
Trace system:
+ The legacy trace mechanism has been completely removed - it has been
obsolete for the years since the trace macros were introduced. The
configuration constant configUSE_TRACE_FACILITY is now used to optionally
include additional queue and task information. The additional information
is intended to make the trace mechanism more generic, and allow the trace
output to provide more information. When configUSE_TRACE_FACILITY is set
to 1:
- the queue structure includes an additional member to hold the queue
type, which can be base, mutex, counting semaphore, binary semaphore
or recursive mutex.
- the queue structure includes an additional member to hold a queue
number. A trace tool can set and query the queue number for its own
purposes. The kernel does not use the queue number itself.
- the TCB structure includes an additional member to hold a task number
number. A trace tool can set and query the task number for its own
purposes. The kernel does not use the task number itself.
+ Queues and all types of semaphores are now automatically allocated their
type as they are created.
+ Added two new trace macros - traceTASK_PRIORITY_INHERIT() and
traskTASK_PRIORITY_DISINHERIT().
+ Updated the traceQUEUE_CREATE_FAILED() macro to take a parameter that
indicates the type of queue, mutex, or semaphore that failed to be
created.
+ The position from which traceCREATE_MUTEX() is called has been moved from
after the call to xQueueGenericSend() [within the same function] to before
the call. This ensures the trace events occur in the correct order.
+ The value passed into tracePRIORITY_SET() has been corrected for the case
where vTaskPrioritySet() is called with a null parameter.
Changes between V7.0.1 and V7.0.2 released September 20 2011
New ports:
+ The official FreeRTOS Renesas RX200 port and demo application have been
incorporated into the main FreeRTOS zip file download.
+ The official FreeRTOS Renesas RL78 port and demo application have been
incorporated into the main FreeRTOS zip file download.
+ The official FreeRTOS Freescale Kinetis K60 tower demo application has
been incorporated into the main FreeRTOS zip file download. This includes
an embedded web server example.
+ A new Microblaze V8 port layer has been created to replace the older, now
deprecated, port layer. The V8 port supports V8.x of the Microblaze IP,
including exceptions, caches, and the floating point unit. A new
Microblaze demo has also been added to demonstrate the new Microblaze V8
port layer. The demo application was created using V13.1 of the Xilinx
EDK, and includes a basic embedded web server that uses lwIP V1.4.0.
+ The official FreeRTOS Fujitsu FM3 MB9A310 demo application has been
incorporated into the main FreeRTOS zip file download. Projects are
provided for both the IAR and Keil toolchains.
API additions:
+ xTaskGetIdleTaskHandle() has been added.
+ xTaskGetTimerDaemonTaskHandle() has been added.
+ pcTaskGetTaskName() has been added.
+ vSemaphoreDelete() macro has been added to make it obvious how to delete
a semaphore. In previous versions vQueueDelete() had to be used.
+ vTaskCleanUpResources() has been removed. It has been obsolete for a
while.
+ portPOINTER_SIZE_TYPE has been introduced to prevent compiler warnings
being generated when the size of a pointer does not match the size of
the stack type. This will (has already) be used in new ports, but will
not be retrofitted to existing ports until the existing port itself is
updated.
Other updates and news:
+ The core files have all been modified to tighten the coding standard even
further. These are style, not functional changes.
+ All ARM7 port layers have been slightly modified to prevent erroneous
assert() failures when tasks are created and configASSERT() is defined.
+ All ARM IAR projects have been updated to build with the latest V6.2.x
versions of the IAR Embedded Workbench for ARM tools (EWARM). This was
necessary due to a change in the way EWARM uses the CMSIS libraries.
+ The PIC32 port layer has been updated in preparation for V2 of the C32
compiler.
+ The old Virtex-4 Microblaze demo has been marked as deprecated. Please
use the brand new Spartan-6 port and demo in its place.
+ The bones of a new generic command interpreter is located in
FreeRTOS/Demo/Common/Utils/CommandInterpreter.c. This is still a work in
progress, and not documented. It is however already in use. It will be
documented in full when the projects that are already using it are
completed.
+ A couple of new standard demos have been included. First, a version of
flop.c called sp_flop.c. This is similar to flop.c, but uses single
precision floats in place of double precision doubles. This allows the
for testing ports to processors that have only single precision floating
point units, and revert to using emulated calculations whenever a double
is used. Second, comtest_strings.c has been included to allow the test
of UART drivers when an entire string is transmitted at once. The
previous comtest.c only used single character transmission and reception.
+ lwIP V1.4.0 is now included in the FreeRTOS/Demo/Common directory, and
used by a couple of new demos.
Changes between V7.0.0 and V7.0.1 released May 13 2011
+ Added a Fujitsu FM3 demo application for both the IAR and Keil tool
chains.
+ Added a SmartFusion demo application for all of the IAR, Keil and
SoftConsole (GCC/Eclipse) tool chains.
+ Updated the RX600 port and demo applications to take into account the
different semantics required when using the latest (V1.0.2.0) version of
the Renesas compiler.
+ Modified the RX600 Ethernet driver slightly to make it more robust under
heavy load, and updated the uIP handling task to make use of the FreeRTOS
software timers.
+ Slightly changed the PIC32 port layer to move an ehb instruction in line
with the recommendations of the MIPS core manual, and ensure 8 byte stack
alignment is truly always obtained.
+ Changed the behaviour when tasks are suspended before the scheduler has
been started. Before, there needed to be at least one task that was not
in the suspended state. This is no longer the case.
Changes between V6.1.1 and V7.0.0 released April 8 2011
FreeRTOS V7.0.0 is backward compatible with FreeRTOS V6.x.x
Main changes:
+ Introduced a new software timer implementation.
+ Introduced a new common demo application file to exercise the new timer
implementation.
+ Updated the Win32/MSVC simulator project to include the new software timer
demo tasks and software timer tick hook test. Much simpler software timer
demonstrations are included in the demo projects for both of the new ports
(MSP430X with CCS4 and STM32 with TrueStudio).
+ Various enhancements to the kernel implementation in tasks.c. These are
transparent to users and do not effect the pre-existing API.
+ Added calls to configASSERT() within the kernel code. configASSERT() is
functionally equivalent to the standard C assert() macro, but does not
rely on the compiler providing assert.h.
Other changes:
+ Updated the MSP430X IAR port and demo project to include support for the
medium memory model.
+ Added a demo project for the MSP430X that targets the MSP430X Discovery
board and uses the Code Composer Studio 4 tools. This demo includes use
of the new software timer implementation.
+ Added an STM32F100RB demo project that targets the STM32 Discovery Board
and uses the TrueStudio Eclipse based IDE from Atollic.
+ Removed some compiler warnings from the PSoC demo application.
+ Updated the PIC32 port layer to ensure the
configMAX_SYSCALL_INTERRUPT_PRIORITY constant works as expected no matter
what its value is (within the valid range set by the microcontroller
kernel).
+ Updated the PIC24, dsPIC and PIC32 projects so they work with the latest
MPLAB compiler versions from Microchip.
+ Various cosmetic changes to prepare for a standards compliance statement
that will be published after the software release.
Changes between V6.1.0 and V6.1.1 released January 14 2011
+ Added two new Windows simulator ports. One uses the free Microsoft Visual
Studio 2010 express edition, and the other the free MingW/Eclipse
environment. Demo projects are provided for both.
+ Added three demo projects for the PSoC 5 (CYAC5588). These are for the
GCC, Keil, and RVDS build tools, and all use the PSoC Creator IDE.
+ Added a demo for the low power STM32L152 microcontroller using the IAR
Embedded Workbench.
+ Added a new port for the MSP430X core using the IAR Embedded Workbench.
+ Updated all the RX62N demo projects that target the Renesas Demonstration
Kit (RDK) to take into account the revered LED wiring on later hardware
revisions, and the new J-Link debug interface DLL.
+ Updated all the RX62N demo projects so the IO page served by the example
embedded web server works with all web browsers.
+ Updated the Red Suite projects to work with the up coming Red Suite
release, and to use a more recent version of the CMSIS libraries.
+ Added the traceTAKE_MUTEX_RECURSIVE_FAILED() trace macro.
+ Removed the (pointless) parameter from the traceTASK_CREATE_FAILED()
trace macro.
+ Introduced the portALT_GET_RUN_TIME_COUNTER_VALUE() macro to compliment
the already existing portGET_RUN_TIME_COUNTER_VALUE(). This allows for
more flexibility in how the time base for the run time statistics feature
can be implemented.
+ Added a "cpsie i" instruction before the "svc 0" instruction used to start
the scheduler in each of the Cortex M3 ports. This is to ensure that
interrupts are globally enabled prior to the "svc 0" instruction being
executed in cases where interrupts are left disabled by the C start up
code.
+ Slight optimisation in the run time stats calculation.
Changes between V6.0.5 and V6.1.0 released October 6 2010
+ Added xTaskGetTickCountFromISR() function.
+ Modified vTaskSuspend() to allow tasks that have just been created to be
immediately suspended even when the kernel has not been started. This
allows them to effectively start in the Suspended state - a feature that
has been asked for on numerous occasions to assist with initialisation
procedures.
+ Added ports for the Renesas RX62N using IAR, GCC and Renesas tool suites.
+ Added a STM32F103 demo application that uses the Rowley tools.
+ Under specific conditions xFreeBytesRemaining within heap_2.c could end up
with an incorrect value. This has been fixed.
+ xTaskCreateGeneric() has a parameter that can be used to pass the handle
of the task just created out to the calling task. The assignment to this
parameter has been moved to ensure it is assigned prior to the newly
created having any possibility of executing. This takes into account the
case where the assignment is made to a global variable that is accessed by
the newly created task.
+ Fixed some build time compiler warnings in various FreeTCPIP (based on
uIP) files.
+ Fixed some build time compiler warnings in Demo/Common/Minimal/IntQueue.c.
Changes between V6.0.4 and V6.0.5 released May 17 2010
+ Added port and demo application for the Cortus APS3 processor.
Changes between V6.0.3 and V6.0.4 released March 14 2010
+ All the contributed files that were located in the Demo/Unsupported_Demos
directory have been removed. These files are instead now available in the
new Community Contributions section of the FreeRTOS website. See
https://www.FreeRTOS.org/RTOS-contributed-ports.html
+ The project file located in the Demo/CORTEX_STM32F107_GCC_Rowley directory
has been upgraded to use V2.x of the Rowley Crossworks STM32 support
package.
+ An initial Energy Micro EFM32 demo has been included. This will be
updated over the coming months to make better use of the low power modes
the EFM32 provides.
Changes between V6.0.2 and V6.0.3 released February 26 2010
+ SuperH SH7216 (SH2A-FPU) port and demo application added.
+ Slight modification made to the default implementation of
pvPortMallocAligned() and vPortFreeAligned() macros so by default they
just call pvPortMalloc() and vPortFree(). The macros are only needed to
be defined when a memory protection unit (MPU) is being used - and then
only depending on other configuration settings.
Changes between V6.0.1 and V6.0.2 released January 9th 2010
+ Changed all GCC ARM 7 ports to use 0 as the SWI instruction parameter.
Previously the parameter was blank and therefore only an implicit 0 but
newer GCC releases do not permit this.
+ Updated IAR SAM7S and SAM7X ports to work with IAR V5.40.
+ Changed the stack alignment requirement for PIC32 from 4 bytes to 8 bytes.
+ Updated prvListTaskWithinSingleList() is it works on processors where the
stack grows up from low memory.
+ Corrected some comments.
+ Updated the startup file for the RVDS LPC21xx demo.
Changes between V6.0.0 and V6.0.1 released November 15th 2009
+ Altered pxPortInitialiseStack() for all Cortex-M3 ports to ensure the
stack pointer is where the compiler expects it to be when a task first
starts executing.
The following minor changes only effect the Cortex-M3 MPU port:
+ portRESET_PRIVILEGE() assembly macro updated to include a clobber list.
+ Added prototypes for all the privileged function wrappers to ensure no
compile time warnings are generated no matter what the warning level
setting.
+ Corrected the name of portSVC_prvRaisePrivilege to
portSVC_RAISE_PRIVILEGE.
+ Added conditional compilation into xTaskGenericCreate() to prevent some
compilers issuing warnings when portPRIVILEGE_BIT is defined as zero.
Changes between V5.4.2 and V6.0.0 released October 16th 2009
FreeRTOS V6 is backward compatible with FreeRTOS V5.x.
Main changes:
+ FreeRTOS V6 is the first version to include memory protection unit (MPU)
support. Two ports now exist for the Cortex M3, the standard FreeRTOS
which does not include MPU support, and FreeRTOS-MPU which does.
+ xTaskCreateRestricted() and vTaskAllocateMPURegions() API functions added
in support of FreeRTOS-MPU.
+ Wording for the GPL exception has been (hopefully) clarified. Also the
license.txt file included in the download has been fixed (the previous
version contained some corruption).
Other changes:
+ New API function xPortGetFreeHeapSize() added to heap_1.c and heap_2.c.
+ ARM7 GCC demo interrupt service routines wrappers have been modified to
call the C portion using an __asm statement. This prevents the function
call being inlined at higher optimisation levels.
+ ARM7 ports now automatically set the THUMB bit if necessary when
setting up the initial stack of a task - removing the need for
THUMB_INTERWORK to be defined. This also allows THUMB mode and ARM mode
tasks to be mixed more easily.
+ All ARM7/9 ports now have portBYTE_ALIGNMENT set to 8 by default.
+ Various demo application project files have been updated to be up to date
with the latest IDE versions.
+ The linker scripts used with command line GCC demos have been updated to
include an eh_frame section to allow their use with the latest Yagarto
release. Likewise the demo makefiles have been updated to include
command line options to reduce or eliminate the eh_frame section all
together.
+ The definition of portBYTE_ALIGNMENT_MASK has been moved out of the
various memory allocation files and into the common portable.h header
file.
+ Removed unnecessary use of portLONG, portSHORT and portCHAR.
+ Added LM3Sxxxx demo for Rowley CrossWorks.
+ Posix simulator has been upgraded - see the corresponding WEB page on the
FreeRTOS.org site.
Changes between V5.4.1 and V5.4.2 released August 9th 2009
+ Added a new port and demo app for the Altera Nios2 soft core.
+ Added LPC1768 demo for IAR.
+ Added a USB CDC demo to all LPC1768 demos (Code Red, CrossWorks and IAR).
+ Changed clock frequency of LPC1768 demos to 99MHz.
Changes between V5.4.0 and V5.4.1 released July 25th 2009
+ New hook function added. vApplicationMallocFailedHook() is (optionally)
called if pvPortMalloc() returns NULL.
+ Additional casting added to xTaskCheckForTimeOut(). This prevents
problems that can arise should configUSE_16_BIT_TICKS be set to 1 on a
32 bit architecture (which would probably be a mistake, anyway).
+ Corrected the parameter passed to NVIC_SetPriority() to set the MAC
interrupt priority in both LPC1768 demos.
+ Decreased the default setting of configMINIMAL_STACK_SIZE in the PIC32
demo application to ensure the heap space was not completely consumed
before the scheduler was started.
Changes between V5.3.1 and V5.4.0 released July 13th 2009
+ Added Virtex5 / PPC440 port and demos.
+ Replaced the LPC1766 Red Suite demo with an LPC1768 Red Suite demo. The
original demo was configured to use engineering samples of the CPU. The
new demo has an improved Ethernet driver.
+ Added LPC1768 Rowley demo with zero copy Ethernet driver.
+ Reworked byte alignment code to ensure 8 byte alignment works correctly.
+ Set configUSE_16_BIT_TICKS to 0 in the PPC405 demo projects.
+ Changed the initial stack setup for the PPC405 to ensure the small data
area pointers are setup correctly.
Changes between V5.3.0 and V5.3.1 released June 21st 2009
+ Added ColdFire V1 MCF51CN128 port and WEB server demo.
+ Added STM32 Connectivity Line STM32107 Cortex M3 WEB server demo.
+ Changed the Cortex M3 port.c asm statements to __asm so it can be
compiled using Rowley CrossWorks V2 in its default configuration.
+ Updated the Posix/Linux simulator contributed port.
Changes between V5.2.0 and V5.3.0 released June 1st 2009
Main changes:
+ Added new (optional) feature that gathers statistics on the amount of CPU
time used by each task.
+ Added a new demo application for the Atmel AT91SAM3U Cortex-M3 based
microcontroller.
+ Added a new demo application for the NXP LPC1766 Cortex-M3 based
microcontroller.
+ Added a contributed port/demo that allows FreeRTOS to be 'simulated' in a
Linux environment.
Minor changes:
+ Updated the Stellaris uIP WEB server demos to include the new run time
statistics gathering feature - and include a served WEB page that
presents the information in a tabular format.
+ Added in the lwIP port layer for the Coldfire MCF52259.
+ Updated the CrossWorks LPC2368 WEB server to include an image in the
served content.
+ Changed some of the timing in the initialisation of the LPC2368 MAC to
permit its use on all part revisions.
+ Minor modifications to the core uIP code to remove some compiler warnings.
+ Added xTaskGetApplicationTaskTag() function and updated the OpenWatcom
demo to make use of the new function.
+ Added contributed demos for AVR32 AP7000, STM32 Primer 2 and STM32 using
Rowley Crossworks.
+ Heap_1.c and Heap_2.c used to define structures for the purpose of data
alignment. These have been converted to unions to save a few bytes of
RAM that would otherwise be wasted.
+ Remove the call to strncpy() used to copy the task name into the TCB when
the maximum task name is configured to be 1 byte long.
Changes between V5.1.2 and V5.2.0 released March 14th 2009
+ Optimised the queue send and receive functions (also used by semaphores).
+ Replaced the standard critical sections used to protect BIOS calls in the
PC port to instead use scheduler locks. This is because the BIOS calls
always return with interrupts enabled.
+ Corrected unclosed comments in boot.s.
Changes between V5.1.1 and V5.1.2 released February 9th 2009
+ Added NEC V850ES port and demo.
+ Added NEC 78K0R port and demo.
+ Added MCF52259 port and demo.
+ Added the AT91SAM9XE port and demo.
+ Updated the MCF52233 FEC driver to work around a silicon bug that
prevents the part auto negotiating some network parameters.
+ Minor modifications to the MCF52233 makefile to permit it to be used
on Linux hosts.
+ Updated the STM32 primer files to allow them to be built with the latest
version of the RIDE tools.
+ Updated the threads.js Java script used for kernel aware debugging in
the Rowley CrossWorks IDE.
Changes between V5.1.0 and V5.1.1 released November 20, 2008
+ Added Coldfire MCF52233 WEB server demo using GCC and Eclipse.
+ Added IAR MSP430 port and demo.
+ Corrected several compiler time issues that had crept in as tool versions
change.
+ Included FreeRTOS-uIP - a faster uIP. This is not yet complete.
Changes between V5.0.4 and V5.1.0 released October 24, 2008
+ Added a new port and demo application for the ColdFire V2 core using the
CodeWarrior development tools.
+ Replaced the ARM7 demo that used the old (and now no longer supported)
Keil compiler with a new port that uses the new Keil/RVDS combo.
+ Stack overflow checking now works for stacks that grow up from low
memory (PIC24 and dsPIC).
+ BUG FIX - set the PIC32 definition of portSTACK_GROWTH to the correct
value of -1.
+ MSP430 port layers have been updated to permit tasks to place the
microcontroller into power down modes 1 to 3. The demo applications have
likewise been updated to demonstrate the new feature.
+ Replaced the two separate MSP430/Rowley port layers with a single and more
flexible version.
+ Added more contributed ports, including ports for NEC and SAM9
microcontrollers.
+ Changed the linker script used in the LPC2368 Eclipse demo.
Changes between V5.0.3 and V5.0.4 released September 22, 2008
+ Completely re-written port for ColdFire GCC.
+ Bug fix: All Cortex M3 ports have a minor change to the code that sets
the pending interrupt.
+ Some header files require that FreeRTOS.h be included prior to their
inclusion. #error message have been added to all such header file
informing users to the cause of the compilation error should the headers
not be included in the correct order.
Changes between V5.0.2 and V5.0.3 released July 31, 2008
Changes relating to the Cortex M3:
+ Added configMAX_SYSCALL_INTERRUPT_PRIORITY usage to all the Cortex M3
ports and demos. See the port documentation pages on the FreeRTOS.org
WEB site for full usage information.
+ Improved efficiency of Cortex M3 port even further.
+ Ensure the Cortex M3 port works no matter where the vector table is
located.
+ Added the IntQTimer demo/test tasks to a demo project for each CM3 port
(Keil, GCC and IAR) to test the new configMAX_SYSCALL_INTERRUPT_PRIORITY
functionality.
+ Added the mainINCLUDE_WEB_SERVER definition to the LM3SXXXX IAR and Keil
projects to allow the WEB server to be conditionally excluded from the
build and therefore allow use of the KickStart (code size limited)
compiler version.
Other changes:
+ Moved the PIC24 and dsPIC versions of vPortYield() from the C file to
an assembly file to allow use with all MPLAB compiler versions. This also
allows the omit-frame-pointer optimisation to be turned off.
Changes between V5.0.0 and V5.0.2 released May 30, 2008
+ Updated the PIC32 port to allow queue API calls to be used from
interrupts above the kernel interrupt priority, and to allow full
interrupt nesting. Task stack usages has also been reduced.
+ Added a new PowerPC port that demonstrates how the trace macros can be
used to allow the use of a floating point co-processor. The
traceTASK_SWITCHED_OUT() and traceTASK_SWITCHED_INT() macros are used to
save and restore the floating point context respectively for those tasks
that actually use floating point operations.
+ BUG FIX: The first PPC405 port contained a bug in that it did not leave
adequate space above the stack for the backchain to be saved when a task
started to execute for the first time.
+ Updated queue.c to add in the means to allow interrupt nesting and for
queue API functions to be called from interrupts that have a priority
above the kernel priority. This is only supported on PIC32 ports thus
far.
+ Fixed the compiler warnings that were generated when the latest version
of WinAVR was used.
+ Remove all inline usage of 'inline' from the core kernel code.
+ Added the queue registry feature. The queue registry is provided as a
means for kernel aware debuggers to locate queue definitions. It has no
purpose unless you are using a kernel aware debugger. The queue registry
will only be used when configQUEUE_REGISTRY_SIZE is greater than zero.
+ Added the ST Cortex-M3 drivers into the Demo/Common/Drivers directory to
prevent them from having to be included in multiple demos.
+ Added a Keil STM32 demo application.
+ Changed the blocktim.c test files as it is no longer legitimate for all
ports to call queue API functions from within a critical section.
+ Added the IntQueue.c test file to test the calling of queue API functions
from different interrupt priority levels, and test interrupt nesting.
Changes between V5.0.0 and V5.0.1
+ V5.0.1 was a customer specific release.
Changes between V4.8.0 and V5.0.0 released April 15, 2008
*** VERY IMPORTANT INFORMATION ON UPGRADING TO FREERTOS.ORG V5.0.0 ***
The parameters to the functions xQueueSendFromISR(), xQueueSendToFrontFromISR(),
xQueueSendToBackFromISR() and xSemaphoreGiveFromISR() have changed. You must
update all calls to these functions to use the new calling convention! Your
compiler might not issue any type mismatch warnings!
Other changes:
+ Support added for the new Luminary Micro LM3S3768 and LM3S3748 Cortex-M3
microcontrollers.
+ New task hook feature added.
+ PowerPC demo updated to use version 10.1 of the Xilinx EDK.
+ Efficiency gains within the PIC32 port layer.
Changes between V4.7.2 and V4.8.0 released March 26 2008
+ Added a Virtex4 PowerPC 405 port and demo application.
+ Added optional stack overflow checking and new
uxTaskGetStackHighWaterMark() function.
+ Added new xQueueIsQueueEmptyFromISR(), xQueueIsQueueFullFromISR() and
uxQueueMessagesWaitingFromISR() API functions.
+ Efficiency improvements to the Cortex-M3 port layer. NOTE: This
requires that an SVC handler be installed in the application.
+ Efficiency improvements to the queue send and receive functions.
+ Added new trace macros. These are application definable to provide
a flexible trace facility.
+ Implemented the configKERNEL_INTERRUPT_PRIORITY within the Keil Cortex
M3 port layer (bringing it up to the same standard as the IAR and GCC
versions).
+ Ports that used the arm-stellaris-eabi-gcc tools have been converted to
use the arm-non-eabi-gcc tools.
Changes between V4.7.1 and V4.7.2 released February 21, 2008
+ Added Fujitsu MB91460 port and demo.
+ Added Fujitsu MB96340 port and demo.
+ Tidied up the capitalisation of include files to facilitate builds on
Linux hosts.
+ Removed some redundant casting that was generating warnings - but was
included to remove warnings on other compilers.
Changes between V4.7.0 and V4.7.1 released February 3, 2008
+ Updated all IAR ARM projects to use V5.11 of the IAR Embedded Workbench
for ARM.
+ Introduced recursive semaphore feature.
+ Updated LPC2368 demos to take into account silicon bugs in old chip
revisions.
+ Updated STR9 uIP port to manually set the net mask and gateway addresses.
+ Updating demos to allow more to run with the co-operative scheduler.
+ Fixed co-operative scheduler behaviour upon the occurrence of a tick
interrupt while the scheduler was suspended.
+ Updated documentation contained within semphr.h.
+ ARM7 GCC ports no longer use the IRQ attribute.
Changes between V4.6.1 and V4.7.0 released December 6, 2007
+ Introduced the counting semaphore macros and demo source files. The
Open Watcom PC project has been updated to include the new demo. See
the online documentation for more information.
+ Introduced the 'alternative' queue handling API and demo source files.
The Open Watcom PC project has been updated to include the new demo
source files. See the online documentation for more information.
+ Added AT91SAM7X Eclipse demo project.
+ Added the STM32 primer demo project for the GCC compiler and Ride IDE.
+ Removed the .lock files that were mistakenly included in the V4.6.1
eclipse workspaces.
Changes between V4.6.0 and V4.6.1 released November 5 2007
+ Added support for the MIPS M4K based PIC32.
+ Added 'extern "C"' to all the header files to facilitate use with C++.
Changes between V4.5.0 and V4.6.0 released October 28 2007
+ Changed the method used to force a context switch within an ISR for the
ARM7/9 GCC ports only. The portENTER_SWITCHING_ISR() and
portEXIT_SWITCHING_ISR() macros are no longer supported. This is to
ensure correct behaviour no matter which GCC version is used, with or
without the -fomit-frame-pointer option, and at all optimisation levels.
+ Corrected the prototype for xQueueGenericSend() within queue.h.
Changes between V4.4.0 and V4.5.0 released September 17 2007
+ Added the xQueueSendToFront(), xQueueSendToBack() and xQueuePeek()
functionality. These should now be used in preference to the old
xQueueSend() function - which is maintained for backward compatibility.
+ Added Mutex functionality. The behaviour of mutexes is subtly different
to the already existing binary semaphores as mutexes automatically
include a priority inheritance mechanism.
+ Added the GenQTest.c and QPeek.c to test and demonstrate the behaviour
of the new functionality.
+ Updated the LM3Sxxxx and PC ports to include the new GenQTest.c and
QPeek.c files.
+ Updated the GCC port for the Cortex M3 to include the
configKERNEL_INTERRUPT_PRIORITY functionality. This was previously only
included in the IAR port.
+ Optimised the GCC and IAR port layer code - specifically the context
switch code.
+ Consolidated the LM3Sxxxx EK demos for all development tools into a
single project that automatically detects which version of the EK the
application is executing on.
+ Added Eclipse support for LM3Sxxxx evaluation kits.
+ Added Eclipse support for the Keil LPC2368 evaluation kit.
+ Added the Demo/Drivers directory to hold code that is common to multiple
demo application projects.
+ Included some minor bug fixes in the uIP 1.0 code.
+ Added an lwIP demo for the STR9 - thanks ST for assistance.
+ Updated the AVR32 port to ensure correct behaviour with full compiler
optimisation.
+ Included binaries for OpenOCD FTDI and parallel port interfaces.
Changes between V4.4.0 and V4.3.1 released July 31, 2007
+ Added AVR32 UC3B demo application.
+ Updated AVR32 UC3A port and demo applications.
+ Added IAR lwIP demo for AVR32 UC3A.
+ Updated listGET_OWNER_OF_NEXT_ENTRY() to assist compiler optimisation
(thanks Niu Yong for making the suggestion).
+ Added xTaskGetSchedulerState() API function.
+ BUG FIX: Corrected behaviour when tasks that are blocked indefinitely
have their block time adjusted (within xQueueSend() and xQueueReceive()),
and are the subject of a call the vTaskResume() when they are not
actually in the Suspended state (thanks Dan Searles for reporting the
issues).
Changes between V4.3.0 and V4.3.1 released June 11, 2007
+ Added STMicroelectronics STM32 Cortex-M3 demo application.
+ Updated ustdlib.c for the GCC LM3S6965 demo.
Changes between V4.2.1 and V4.3.0 released June 5, 2007
+ Introduced configKERNEL_INTERRUPT_PRIORITY to the IAR Cortex-M3, PIC24
and dsPIC ports. See the LM3S6965 and PIC24 demo application
documentation pages for more information.
+ Updated the PIC24 and dsPIC demos to build with V3.0 of the PIC30 GCC
tools, and changed the demo applications.
+ Added demos for the new Ethernet and CAN enabled Luminary Micro Stellaris
microcontrollers.
+ Corrected bug in uIP the demos that prevented frames of approximately 1480
bytes and over from being transmitted.
+ Included the LPC2368/uIP/Rowley demo into the main FreeRTOS.org
download.
+ Update to WizC PIC18 port to permit its use with version 14 of the
compiler. Thanks Marcel!
Changes between V4.2.1 and V4.2.0 released April 2, 2007
+ Added AVR32 AT32UC3A ports for GCC and IAR.
+ Added -fomit-frame-pointer option to lwIP SAM7X demo makefile.
+ Moved location of call to LCD_Init() in STR9 demo to ensure it is only
called after the scheduler has been started.
Changes between V4.1.3 and V4.2.0 released February 8, 2007
+ Changes to both task.c and queue.c as a result of testing performed on
the SafeRTOS code base.
+ Added Cortex-M3 LM3S811 demos for GCC and IAR tools.
Changes between V4.1.2 and V4.1.3 released November 19, 2006
+ Added STR750 ARM7 port using the Raisonance RIDE/GCC tools.
+ Added -fomit-frame-pointer option to Rowley ARM7 demos as work around
to GCC bug at some optimisation levels.
+ Altered the way the heap is defined in the LM3S811 Keil demo to prevent
the RAM usage from counting toward the code size limit calculation.
+ CO-ROUTINE BUG FIX: Removed the call to prvIsQueueEmpty from within
xQueueCRReceive as it exited with interrupts enabled. Thanks Paul Katz.
+ Tasks that block on events with a timeout of portMAX_DELAY are now
blocked indefinitely if configINCLUDE_vTaskSuspend is defined.
Previously portMAX_DELAY was just the longest block time possible. This
is still the case if configINCLUDE_vTaskSuspend is not defined.
+ Minor changes to some demo application files.
Changes between V4.1.1 and V4.1.2 released October 21, 2006
+ Added 16bit PIC ports and demos.
+ Added STR750 port and demo.
Changes between V4.1.0 and V4.1.1 released September 24, 2006
+ Added the Luminary Micro Stellaris LM3S811 demo application.
Changes between V4.0.5 and V4.1.0 released August 28, 2006
+ Prior to V4.1.0, under certain documented circumstances, it was possible
for xQueueSend() and xQueueReceive() to return without having completed
and without their block time expiring. The block time effectively
stated a maximum block time, and the return value of the function needed
to be checked to determine the reason for returning. This is no longer
the case as the functions will only return once the block time has
expired or they are able to complete their operation. It is therefore no
longer necessary to wrap calls within loops.
+ Changed the critical section handling in the IAR AVR port to correct the
behaviour when used with later compiler versions.
+ Added the LPC2138 CrossWorks demo into the zip file. Previously this was
only available as a separate download.
+ Modified the AVR demo applications to demonstrate the use of co-routines.
Changes between V4.0.4 and V4.0.5 released August 13, 2006
+ Introduced API function xTaskResumeFromISR(). Same functionality as
xTaskResume(), but can be called from within an interrupt service routine.
+ Optimised vListInsert() in the case when the wake time is the maximum
tick count value.
+ Bug fix: The 'value' of the event list item is updated when the priority
of a task is changed. Previously only the priority of the TCB itself was
changed.
+ vTaskPrioritySet() and vTaskResume() no longer use the event list item.
This has not been necessary since V4.0.1 when the xMissedYield handling
was added.
+ Lowered the PCLK setting on the ARM9 STR9 demo from 96MHz to 48MHz.
+ When ending the scheduler - do not try to attempt a context switch when
deleting the current task.
+ SAM7X EMAC drivers: Corrected the Rx frame length mask when obtaining
the length from the rx descriptor.
Changes between V4.0.3 and V4.0.4 released June 22, 2006
+ Added a port and demo application for the STR9 ARM9 based processors from
ST.
+ Slight optimisation to the vTaskPrioritySet() function.
+ Included the latest uIP version (1.0) in the demo/common/ethernet
directory.
Changes between V4.0.2 and V4.0.3 released June 7, 2006
+ Added a port and demo application for the Cortex-M3 target using the IAR
development tools.
+ The ARM Cortex-m3 Rowley projects have been updated to use V1.6 of the
CrossStudio tools.
+ The heap size defined for the lwIP Rowley demo has been reduced so that
the project will link correctly when using the command line GCC tools
also. The makefile has also been modified to allow debugging.
+ The lwIP Rowley demo not includes a 'kernel aware' debug window.
+ The uIP Rowley project has been updated to build with V1.6 of CrossWorks.
+ The second set of tasks in the blockQ demo were created the wrong way
around (inconsistent to the description in the file). This has been
corrected.
Changes between V4.0.1 and V4.0.2 released May 28, 2006
+ Port and demo application added for the Tern Ethernet Engine controller.
+ Port and demo application added for MC9S12 using GCC, thanks to
Jefferson "imajeff" Smith.
+ The function vTaskList() now suspends the scheduler rather than disabling
interrupts during the creation of the task list.
+ Allow a task to delete itself by passing in its own handle. Previously
this could only be done by passing in NULL.
+ Corrected the value passed to the WDG_PeriodValueConfig() library
function in the STR71x demo.
+ The tick hook function is now called only within a tick isr. Previously
it was also called when the tick function was called during the scheduler
unlocking process.
+ The EMAC driver in the SAM7X lwIP demo has been made more robust as per
the thread: https://sourceforge.net/forum/message.php?msg_id=3714405
+ In the PC ports: Add function prvSetTickFrequencyDefault() to set the
DOS tick back to its proper value when the scheduler exits. Thanks
Raynald!
+ In the Borland x86 ports there was a mistake in the portFIRST_CONTEXT
macro where the BP register was not popped from the stack correctly. The
BP value would never get used so this did not cause a problem, but it has
been corrected all the same.
Changes between V4.0.0 and V4.0.1 released April 7 2006
+ Improved the ARM CORTEX M3 ports so they now only have to service
pendSV interrupts.
+ Added a Luminary Micro port and demo for use with Rowley CrossWorks.
+ Added the xMissedYield handling to tasks.c.
Changes between V3.2.4 and V4.0.0
Major changes:
+ Added new RTOS port for Luminary Micros ARM CORTEX M3 microcontrollers.
+ Added new co-routine functionality.
Other kernel changes:
+ An optional tick hook call is now included in the tick function.
+ Introduced the xMiniListItem structure and removed the list pxHead
member in order to reduce RAM usage.
+ Added the following definitions to the FreeRTOSConfig.h file included
with every port:
configUSE_TICK_HOOK
configUSE_CO_ROUTINES
configMAX_CO_ROUTINE_PRIORITIES
+ The volatile qualification has been changed on the list members to allow
the task.c code to be tidied up a bit.
+ The scheduler can now be started even if no tasks have been created!
This is to allow co-routines to run when there are no tasks.
+ A task being woken by an event will now preempt the currently running task
even if its priority is only equal to the currently running task.
Port and demo application changes:
+ Updated the WinAVR demo to compile with the latest version of WinAVR
with no warnings generated.
+ Changed the WinAVR makefile to make chars signed - needed for the
co-routine code if BaseType_t is set to char.
+ Added new demo application file crflash.c. This demonstrates co-routine
functionality including passing data between co-routines.
+ Added new demo application file crhook.c. This demonstrates co-routine
and tick hook functionality including passing data between and ISR and
a co-routine.
+ Some NOP's were missing following stmdb{}^ instructions in various ARM7
ports. These have been added.
+ Updated the Open Watcom PC demo project to include the crflash and crhook
demo co-routines as an example of their use.
+ Updated the H8S demo to compile with the latest version of GCC.
+ Updated the SAM7X EMAC drivers to take into account the hardware errata
regarding lost packets.
+ Changed the default MAC address used by some WEB server demos as the
original addresses used was not liked by some routers.
+ Modified the SAM7X/IAR startup code slightly to prevent it hanging on
some systems when the code is executed using a j-link debugger. The
j-link macro file configures the PLL before the code executes so
attempting to configure it again in the startup code was causing a
problem for some user. Now a check is performed first to see if the
PLL is already set up.
+ GCC port now contain all assembler code in a single asm block rather than
individual blocks as before.
+ GCC LPC2000 code now explicitly uses R0 rather than letting the assembler
choose the register to use as a temporary register during the context
switch.
+ Added portNOP() macro.
+ The compare match load value on LPC2000 ports now has 1 added to correct
the value used.
+ The minimal stack depth has been increased slightly on the WIZC PIC18
port.
Changes between V3.2.3 and V3.2.4
+ Modified the GCC ARM7 port layer to allow use with GCC V4.0.0 and above.
Many thanks to Glen Biagioni for the provided update.
+ Added a new Microblaze port and demo application.
+ Modified the SAM7X EMAC demo to default to use the MII interface rather
than the RMII interface.
+ Modified the startup sequence of the SAM7X demo slightly to allow the
EMAC longer to auto negotiate.
Changes between V3.2.2 and V3.2.3
+ Added MII interface support to the SAM7X EMAC peripheral driver.
Previously versions worked with the RMII interface only.
+ Added command line GCC support to the SAM7X lwIP demo. Previously the
project could only be built using the CrossWorks IDE. Modifications to
this end include the addition of a standard makefile and linker script to
the download, and some adjustments to the stacks allocated to each task.
+ Changed the page returned by the lwIP WEB server demo to display the
task status table rather than the TCP/IP statistics.
+ Corrected the capitalisation of some header file includes and makefile
dependencies to facilitate use on Linux host computers.
+ The various LPC2000 ports had a mistake in the timer setup where the
prescale value was written to T0_PC instead of T0_PR. This would have
no effect unless a prescale value was actually required. This has been
corrected.
Changes between V3.2.1 and V3.2.2 - Released 23 September, 2005
+ Added an IAR port for the Philips LPC2129
+ The Atmel ARM7 IAR demo project files are now saved in the IAR Embedded
Workbench V4.30a format.
+ Updated the J-Link macro file included with the SAM7X uIP demo project
to allow the demo board to be reset over the J-Link.
Changes between V3.2.0 and V3.2.1 - Released 1 September, 2005
+ Added lwIP demo for AT91SAM7X using Rowley tools.
+ Added uIP demo for AT91SAM7X using IAR tools.
+ Added function xTaskGetCurrentTaskHandle().
+ Renamed events.h to mevents.h to prevent it conflicting with the events.h
generated automatically by the HCS12 processor expert utility. events.h
is only used by the PC demo application.
+ Both PIC18 ports now initialise the TBLPTRU to 0 as this is the value
expected by the compiler, and the compilers do not write to this
register.
+ The HCS12 banked model demo now creates the 'suicide' tasks immediately
prior to starting the scheduler. These tasks should be the last tasks to
get started in order for the test to function correctly.
Changes between V3.1.1 and V3.2.0 - Released 29 June, 2005
V3.2.0 introduces two new MSP430 ports and corrects a minor kernel
issues. Thanks to Ares.qi for his input.
+ Added two MSP430 ports that use the Rowley CrossWorks development tools.
One port just mirrors the existing GCC port. The other port was provided
by Milos Prokic. Thanks!
+ V3.2.0 corrects the behavior when vTaskPrioritySet() or vTaskResume()
are called while the scheduler is locked (by a call to
vTaskSuspendAll()). When this is done the subject task now starts to
execute immediately when the scheduler is unlocked if it has the highest
priority that is ready to run. Previously there was a possibility that
the task would not run until the next RTOS tick or call to portYIELD().
+ Another similar small correction ensures that in the case where more than
one task is blocked on a semaphore or queue, the task with the highest
priority is guaranteed to be unblocked first.
+ Added a couple of more test tasks to the PC demo which cover the points
above.
Changes between V3.1.0 and V3.1.1 - Released 21st June, 2005
This release updates the HCS12 port. The common kernel code
remains unchanged.
+ Updated the HCS12 port to support banking and introduced a demo
application for the MC9S12DP256. The new demo application is
located in the Demo/HCS12_CodeWarrior_banked directory.
+ The name of the directory containing the MC9S12F32 demo application
has been changed to Demo/HCS12_CodeWarrior_small (as in 'small'
memory model).
+ MC9S12F32 demo updated slightly to use the PLL. The CPU speed for the
demo application is now 24MHz. Previously it was 8MHz.
+ The demo application file Demo/Common/Minimal/death.c has a slight
alteration to prevent it using floating point variables.
Changes between V3.0.0 and V3.1.0 - Released 11th June, 2005
+ Added new ports for ST Microsystems STR71x, and Freescale HCS12
microcontrollers. Currently the HCS12 port is limited to the small
memory model. Large memory models will be supported in the next
release.
+ PIC18 wizC port updated. Thanks to Marcel van Lieshout for his
continuing contribution.
+ The accuracy of the AVR port timer setup has been improved. Thanks to
Thomas Krutmann for this contribution.
+ Added a new conditional compilation macro configIDLE_SHOULD_YIELD.
See the WEB documentation for details.
+ Updated the CrossWorks uIP demo to build with V1.4 of CrossWorks.
+ Slight modification to the SAM7 release build configuration to correct
an include path definition.
+ Updated the MPLAB PIC18 documentation to provide extra details on linker
file configuration.
Changes between V3.0.0 and V2.6.1 - Released 23rd April, 2005
V3.0.0 includes many enhancements, so this history list is broken into
subsections as follows:
API changes
New ports
Directory name changes
Kernel and miscellaneous changes changes
- API changes
+ Each port now defines BaseType_t as the data type that is most
efficient for that architecture. The type BaseType_t is used
extensively in API calls necessitating the following changes to the
FreeRTOS API function prototypes.
See the "New for V3.0.0" section of the FreeRTOS online
documentation for full details of API changes.
- New ports
+ The AT91FR40008 ARM7 port contributed by John Feller is now included
in the download (thanks John!).
+ The PIC18 port for the wizC/fedC compiler contributed by Marcel van
Lieshout is now included in the download (thanks Marcel!).
+ The IAR port for the AVR microcontroller has been upgraded to V3.0.0
and is now a supported port.
- Directory name changes
For consistency, and to allow integration of the new ports, the
following directory names have been changed.
+ The source/portable/GCC/ARM7 directory has been renamed
source/portable/GCC/ARM7_LPC2000 so it is compatible with the naming
of other GCC ARM7 ports.
+ The Demo/PIC directory has been renamed Demo/PIC18_MPLAB to
accommodate the wizC/fedC PIC port.
+ The demo applications for the two AVR ports no longer share the same
directory. The WinAVR demo is in the Demo/AVR_ATMega323_WinAVR
directory and the IAR port in the Demo/AVR_ATMega323_IAR directory.
- Kernel and miscellaneous changes changes
See the "New for V3.0.0" section of the FreeRTOS online
documentation for more information.
+ Previously 'portmacro.h' contained some user editable definitions
relating to the user application, and some fixed definitions relating
specifically to the port being used. The application specific
definitions have been removed from 'portmacro.h' and placed inside a
new header file called 'FreeRTOSConfig.h'. 'portmacro.h' should now
never be modified by the user. A 'FreeRTOSConfig.h' is now included
in each of FreeRTOS/Demo subdirectories - as it's settings relate to
the demo application rather than being specific to the port.
+ Introduced configUSE_IDLE_HOOK in idle task.
+ The idle task will yield when another idle priority task is ready to
run. Previously the idle task would run to the end of its time slice
regardless.
+ The idle task is now created when the scheduler is started. This
requires less stack than the previous scheme where it was created upon
creation of the first application task.
+ The function usPortCheckFreeStackSpace() has been renamed
usTaskCheckFreeStackSpace() and moved from the portable layer to
tasks.c.
+ Corrected spelling of portMINMAL_STACK_SIZE to portMINIMAL_STACK_SIZE.
+ The portheap.c file included with the AVR port has been deleted. The
AVR demo now uses the standard heap1 sample memory allocator.
+ The GCC AVR port is now build using the standard make utility. The
batch files used previously have been deleted. This means a recent
version of WinAVR is required in order to create a binary suitable for
source level debugging.
+ vTaskStartScheduler() no longer takes the configUSE_PREEMPTION
constant as a parameter. Instead the constant is used directly within
tasks.c and no parameter is required.
+ The header file 'FreeRTOS.h' has been created and is used to include
'projdefs.h', 'FreeRTOSConfig.h' and 'portable.h' in the necessary
order. FreeRTOS.h can now be included in place of these other
headers.
+ The header file 'errors.h' has been deleted. The definitions it
contained are now located within 'projdefs.h'.
+ pvPortMalloc() now takes a size_t parameter as per the ANSI malloc().
Previously an unsigned short was used.
+ When resuming the scheduler a yield is performed if either a tick has
been missed, or a task is moved from the pending ready list into a
ready list. Previously a yield was not performed on this second
condition.
+ In heap1.c an overflow check has been added to ensure the next free
byte variable does not wrap around.
+ Introduced the portTASK_FUNCTION() and portTASK_FUNCTION_PROTO()
macros.
+ The MPLAB PIC port now saved the TABLAT register in interrupt service
routines.
Changes between V2.6.0 and V2.6.1 - Released Feb 22, 2005
This version adds support for the H8 processor.
Other changes:
+ tskMAX_TASK_NAME_LEN removed from the task.h header and added to each
individual portmacro.h file as portMAX_TASK_NAME_LEN. This allows RAM
limited ports to allocate fewer characters to the task name.
+ AVR port - Replaced the inb() and outb() functions with direct memory
access. This allows the port to be built with the 20050414 build of
WinAVR.
+ GCC LPC2106 port - removed the 'static' from the definition of
vNonPreemptiveTick() to allow the demo to link when using the cooperative
scheduler.
+ GCC LPC2106 port - Corrected the optimisation options in the batch files
ROM_THUMB.bat, RAM_THUMB.bat, ROM_ARM.bat and RAM_ARM.bat. The lower case
-o is replaced by an uppercase -O.
+ Tasks.c - The strcpy call has been removed when copying across the task
name into the TCB.
+ Updated the trace visualisation to always be 4 byte aligned so it can be
used on ARM architectures.
+ There are now two tracecon executables (that convert the trace file binary
into an ASCII file). One for big endian targets and one for little endian
targets.
+ Added ucTasksDeleted variable to prevent vTaskSuspendAll() being called
too often in the idle task.
+ SAM7 USB driver - Replaced the duplicated RX_DATA_BK0 in the interrupt
mask with the RX_DATA_BK1.
Changes between V2.5.5 and V2.6.0 - Released January 16, 2005
+ Added the API function vTaskDelayUntil(). The demo app file
Demo/Common/Minimal/flash.c has been updated to demonstrate its use.
+ Added INCLUDE_vTaskDelay conditional compilation.
+ Changed the name of the Demo/ARM7_AtmelSAM7S64_IAR directory to
Demo/ARM7_AT91SAM7S64_IAR for consistency.
+ Modified the AT91SAM7S USB driver to allow descriptors that have
a length that is an exact multiple of the FIFO to be transmitted.
Changes between V2.5.4 and V2.5.5 - Released January 3, 2005
This version adds support for the Atmel SAM7 ARM7 microcontrollers
along with the IAR development tools.
Other changes:
+ Renamed the Demo/ARM7 directory to Demo/ARM7_LPC2106_GCC.
+ Renamed the Demo/ARM7_Keil directory to Demo/ARM7_LPC2129_Keil.
+ Modified the Philips ARM7 serial interrupt service routines to only
process one interrupt per call. This seems to enable the ISR to
operate more quickly.
+ Removed the 'far' keyword from the Open Watcom portable layer source
files. This allows their use with V1.3 of Open Watcom.
+ Minor modifications to the SDCC build files to allow their use under
Linux. Thanks to Frieder Ferlemann for this contribution.
+ Small change to sTaskCreate() to allow a context switch even when
pxCreatedTask is NULL. Thanks to Kamil for this contribution.
+ inline keyword removed from vTaskSwitchContext() and VTaskIncrementTick()
definitions.
Changes between V2.5.3 and V2.5.4 - Released Dec 1, 2004
This is an important maintenance release.
The function cTaskResumeAll() has been modified so it can be used safely
prior to the kernel being initialised. This was an issue as
cTaskResumeAll() is called from pvPortMalloc(). Thanks to Daniel Braun
for highlighting this issue.
Changes between V2.5.2 and V2.5.3 - Released Nov 2, 2004
The critical section handling functions have been changed for the GCC ARM7
port. Some optimisation levels use the stack differently to others. This
means the interrupt flags cannot always be stored on the stack and are
instead now stored in a variable, which is then saved as part of the
tasks context. This allows the GCC ARM7 port to be used at all
optimisation levels - including -Os.
Other minor changes:
+ MSP430 definition of usCriticalNesting now uses the volatile qualifier.
This is probably not required but added just in case.
Changes between V2.5.1 and V2.5.2 - Released Oct 26, 2004
+ Added the Keil ARM7 port.
+ Slight modification to comtest.c to make the delay periods more random.
This creates a better test condition.
Changes between V2.5.0 and V2.5.1 - Released Oct 9, 2004
+ Added the MSP430 port.
+ Extra comments added to the GCC ARM7 port.c and portISR.c files.
+ The memory pool allocated within heap_1.c has been placed within a
structure to ensure correct memory alignment on 32bit systems.
+ Within the GCC ARM7 serial drivers an extra check is made to ensure
the post to the queue was successful if then attempting immediately
retrieve the posted character.
+ Changed the name of the constant portTICKS_PER_MS to portTICK_PERIOD_MS
as the old name was misleading.
Changes between V2.4.2 and V2.5.0 - Released Aug 12, 2004
The RTOS source code download now includes three separate memory allocation
schemes - so you can choose the most appropriate for your application.
These are found in the Source/Portable/MemMang directory. The demo
application projects have also been updated to demonstrate the new schemes.
See the "Memory Management" page of the API documentation for more details.
+ Added heap_1.c, heap_2.c and heap_3.c in the Source/Portable/MemMang
directory.
+ Replaced the portheap.c files for each demo application with one of the
new memory allocation files.
+ Updated the portmacro.h file for each demo application to include the
constants required for the new memory allocators: portTOTAL_HEAP_SIZE and
portBYTE_ALIGNMENT.
+ Added a new test to the ARM7 demo application that tests the operation
of the heap_2 memory allocator.
Changes between V2.4.1 and V2.4.2 - Released July 14, 2004
+ The ARM7 port now supports THUMB mode.
+ Modification to the ARM7 demo application serial port driver.
Changes between V2.4.0 and V2.4.1 - Released July 2, 2004
+ Rationalised the ARM7 port version of portEXIT_CRITICAL() -
improvements provided by Bill Knight.
+ Made demo serial driver more complete and robust.
Changes between V2.4.0 and V2.3.1 - Released June 30, 2004
+ Added the first ARM7 port - thanks to Bill Knight for the assistance
provided.
+ Added extra files to the Demo/Common/Minimal directory. These are
equivalent to their Demo/Common/Full counterparts but with the
calls to the functions defined in print.c removed.
+ Added TABLAT to the list of registers saved as part of a PIC18 context.
Changes between V2.3.0 and V2.3.1 - Released June 25, 2004
+ Changed the way the vector table is defined to be more portable.
+ Corrected the definitions of SPH and SPL in portmacro.s90.
The previous definitions prevented V2.3.0 operating if the iom323.h
header file was included in portmacro.s90.
Changes between V2.2.0 and V2.3.0 - Released June 19, 2004
+ Added an AVR port that uses the IAR compiler.
+ Explicit use of 'signed' qualifier on plain char types.
+ Modified the Open Watcom project files to use 'signed' as the
default char type.
+ Changed odd calculation of initial pxTopOfStack value when
portSTACK_GROWTH < 0.
+ Added inline qualifier to context switch functions within task.c.
Ports that do not support the (non ANSI) inline keyword have the
inline #define'd away in their respective portmacro.h files.
Changes between V2.1.1 and V2.2.0 - Released May 18, 2004
+ Added Cygnal 8051 port.
+ PCLATU and PCLATH are now saved as part of the PIC18 context. This
allows function pointers to be used within tasks. Thanks to Javier
Espeche for the enhancement.
+ Minor changes to demo application files to reduce stack usage.
+ Minor changes to prevent compiler warnings when compiling the new port.
Changes between V2.1.0 and V2.1.1 - Released March 12, 2004
+ Bug fix - pxCurrentTCB is now initialised before the call to
prvInitialiseTaskLists(). Previously pxCurrentTCB could be accessed
while null during the initialisation sequence. Thanks to Giuseppe
Franco for the correction.
Changes between V2.0.0 and V2.1.0 - Released Feb 29, 2004
V2.1.0 has significant reworks that greatly reduce the amount of time
the kernel has interrupts disabled. The first section of modifications
listed here must be taken into account by users. The second section
are related to the kernel implementation and as such are transparent.
Section1 :
+ The typedef TickType_t has been introduced. All delay times should
now use a variable of type TickType_t in place of the unsigned long's
used previously. API function prototypes have been updated
appropriately.
+ The configuration macro USE_16_BIT_TICKS has been introduced. If set
to 1 TickType_t is defined as an unsigned short. If set to 0
TickType_t is defined as an unsigned long. See the configuration
section of the API documentation for more details.
+ The configuration macro INCLUDE_vTaskSuspendAll is now obsolete.
+ vTaskResumeAll() has been renamed cTaskResumeAll() as it now returns a
value (see the API documentation).
+ ulTaskGetTickCount() has been renamed xTaskGetTickCount() as the type
it returns now depends on the USE_16_BIT_TICKS definition.
+ cQueueReceive() must now >never< be used from within an ISR. Use the new
cQueueReceiveFromISR() function instead.
Section 2:
+ A mechanism has been introduced that allows a queue to be accessed by
a task and ISR simultaneously.
+ A "pending ready" queue has been introduced that enables interrupts to
be processed when the scheduler is suspended.
+ The list implementation has been improved to provide faster item
removal.
+ The scheduler now makes use of the scheduler suspend mechanism in places
where previously interrupts were disabled.
Changes between V1.2.6 and V2.0.0 - Released Jan 31, 2004
+ Introduced new API functions:
vTaskPriorityGet ()
vTaskPrioritySet ()
vTaskSuspend ()
vTaskResume ()
vTaskSuspendAll ()
vTaskResumeAll ()
+ Added conditional compilation options that allow the components of the
kernel that are unused by an application to be excluded from the build.
See the Configuration section on the WEB site for more information (on
the API pages). The macros have been added to each portmacro.h file (
sometimes called prtmacro.h).
+ Rearranged tasks.c.
+ Added demo application file dynamic.c.
+ Updated the PC demo application to make use of dynamic.c.
+ Updated the documentation contained in the kernel header files.
+ Creating a task now causes a context switch if the task being created
has a higher priority than the calling task - assuming the kernel is
running.
+ vTaskDelete() now only causes a context switch if the calling task is
the task being deleted.
Changes between V1.2.5 and V1.2.6 - Released December 31, 2003
Barring the change to the interrupt vector (PIC port) these are minor
enhancements.
+ The interrupt vector used for the PIC master ISR has been changed from
0x18 to 0x08 - where it should have always been. The incorrect address
still works but probably executes a number of NOP's before getting to the
ISR.
+ Changed the baud rate used by the AVR demo application to 38400. This
has an error percentage of less than one percent with an 8MHz clock.
+ Raised the priority of the Rx task in demo\full\comtest.c. This only
affects the Flashlite and PC ports. This was done to prevent the Rx
buffer becoming full.
+ Reverted the Flashlite COM port driver back so it does not use the DMA.
The DMA appears to miss characters under stress. The Borland Flashlite
port was also calculating a register value incorrectly resulting in the
wrong DMA source address being used. The same code worked fine when
compiling with Open Watcom. Other minor enhancements were made to the
interrupt handling.
+ Modified the PIC serial Rx ISR to check for and clear overrun errors.
Overrun errors seem to prevent any further characters being received.
+ The PIC demo projects now have some optimisation switched on.
Changes between V1.2.4 and V1.2.5
Small fix made to the PIC specific port.c file described below.
+ Introduced portGLOBAL_INTERRUPT_FLAG definition to test the global
interrupt flag setting. Using the two bits defined within
portINITAL_INTERRUPT_STATE was causing the w register to get clobbered
before the test was performed.
Changes between V1.2.3 and V1.2.4
V1.2.4 contains a release version of the PIC18 port.
An optional exception has been included with the GPL. See the licensing
section of www.FreeRTOS.org for details.
+ The function xPortInitMinimal() has been renamed to
xSerialPortInitMinimal() and the function xPortInit() has been renamed
to xSerialPortInit().
+ The function sSerialPutChar() has been renamed cSerialPutChar() and
the function return type chaned to portCHAR.
+ The integer and flop tasks now include calls to tskYIELD(), allowing
them to be used with the cooperative scheduler.
+ All the demo applications now use the integer and comtest tasks when the
cooperative scheduler is being used. Previously they were only used with
the preemptive scheduler.
+ Minor changes made to operation of minimal versions of comtest.c and
integer.c.
+ The ATMega port definition of portCPU_CLOSK_HZ definition changed to
8MHz base 10, previously it base 16.
Changes between V1.2.2a and V1.2.3
The only change of any significance is to the license, which has changed
from the Open Software License to the GNU GPL.
The zip file also contains a pre-release version of the PIC18 port. This
has not yet completed testing and as such does not constitute part of the
V1.2.3 release. It is still however covered by the GNU GPL.
There are minor source code changes to accommodate the PIC C compiler.
These mainly involve more explicit casting.
+ sTaskCreate() has been modified slightly to make use of the
portSTACK_GROWTH macro. This is required for the PIC port where the
stack grows in the opposite direction to the other existing ports.
+ prvCheckTasksWaitingTermination() has been modified slightly to bring
the decrementing of usCurrentNumberOfTasks within the critical section,
where it should have been since the creation of an eight bit port.
Changes between V1.2.2 and V1.2.2a
The makefile and buildcoff.bat files included with the AVR demo application
have been modified for use with the September 2003 build of WinAVR. No
source files have changed.
Changes between V1.2.1 and V1.2.2
There are only minor changes here to allow the PC and Flashlite 186 ports
to use the Borland V4.52 compiler, as supplied with the Flashlite 186
development kit.
+ Introduced a BCC directory under source\portable. This contains all the
files specific to the Borland compiler port.
+ Corrected the macro naming of portMS_PER_TICK to portTICKS_PER_MS.
+ Modified comtest.c to increase the rate at which the string is
transmitted and received on the serial port. The Flashlite 186 demo
app baud rate has also been increased.
+ The values of the constants used in both integer.c files have been
increased to force the Borland compiler to use 32 bit values. The
Borland optimiser placed the previous values in 16 bit registers, and in
So doing invalidated the test.
Changes between V1.2.0 and V1.2.1
This version includes some minor changes to the list implementation aimed
at improving the context switch time - with is now approximately 10% faster.
Changes include the removal of some null pointer assignment checks. These
were redundant where the scheduler uses the list functions, but means any
user application choosing to use the same list functions must now check
that no NULL pointers are passed as a parameter.
The Flashlite 186 serial port driver has also been modified to use a DMA
channel for transmissions. The serial driver is fully functional but still
under development. Flashlite users may prefer to use V1.2.0 for now.
Details:
+ Changed the baud rate for the ATMega323 serial test from 19200 to 57600.
+ Use vSerialPutString() instead of single character puts in
Demo\Full\Comtest.c. This allows the use of the flashlite DMA serial
driver. Also the check variable only stops incrementing after two
consecutive failures.
+ semtest.c creates four tasks, two of which operate at the idle priority.
The tasks that operate at the idle priority now use a lower expected
count than those running at a higher priority. This prevents the low
priority tasks from signalling an error because they have not been
scheduled enough time for each of them to count the shared variable to
the higher original value.
+ The flashlite 186 serial driver now uses a DMA channel for transmissions.
+ Removed the volatile modifier from the list function parameters. This was
only ever included to prevent compiler warnings. Now warnings are
removed by casting parameters where the calls are made.
+ prvListGetOwnerOfNextEntry() and prvListGetOwnerOfHeadEntry() have been
removed from list.c and added as macros in list.h.
+ usNumberOfItems has been added to the list structure. This removes the
need for a pointer comparison when checking if a list is empty, and so
is slightly faster.
+ Removed the NULL check in vListRemove(). This makes the call faster but
necessitates any application code utilising the list implementation to
ensure NULL pointers are not passed.
+ Renamed portTICKS_PER_MS definition to portMS_PER_TICK (milli seconds
per tick). This is what it always should have been.
Changes between V1.01 and V1.2.0
The majority of these changes were made to accommodate the 8bit AVR port.
The scheduler workings have not changed, but some of the data types used
have been made more friendly to an eight bit environment.
Details:
+ Changed the version numbering format.
+ Added AVR port.
+ Split the directory demo\common into demo\common\minimal and
demo\common\full. The files in the full directory are for systems with
a display (currently PC and Flashlite 186 demo's). The files in the
minimal directory are for systems with limited RAM and no display
(currently MegaAVR).
+ Minor changes to demo application function prototypes to make more use
of 8bit data types.
+ Within the scheduler itself the following functions have slightly
modified declarations to make use of 8bit data types where possible:
xQueueCreate(),
sQueueReceive(),
sQUeueReceive(),
usQueueMessageWaiting(),
sQueueSendFromISR(),
sSemaphoreTake(),
sSemaphoreGive(),
sSemaphoreGiveFromISR(),
sTaskCreate(),
sTaskMoveFromEventList().
Where the return type has changed the function name has also changed in
accordance with the naming convention. For example
usQueueMessageWaiting() has become ucQueueMessageWaiting().
+ The definition tskMAX_PRIORITIES has been moved from task.h to
portmacro.h and renamed portMAX_PRIORITIES. This allows different
ports to allocate a different maximum number of priorities.
+ By default the trace facility is off, previously USE_TRACE_FACILITY
was defined.
+ comtest.c now uses a psuedo random delay between sends. This allows for
better testing as the interrupts do not arrive at regular intervals.
+ Minor change to the Flashlite serial port driver. The driver is written
to demonstrate the scheduler and is not written to be efficient.
Changes between V1.00 and V1.01
These changes improve the ports. The scheduler itself has not changed.
Improved context switch mechanism used when performing a context
switch from an ISR (both the tick ISR and the serial comms ISR's within
the demo application). The new mechanism is faster and uses less stack.
The assembler file portasm.asm has been replaced by a header file
portasm.h. This includes a few assembler macro definitions.
All saving and restoring of registers onto/off of the stack is now handled
by the compiler. This means the initial stack setup for a task has to
mimic the stack used by the compiler, which is different for debug and
release builds.
Slightly changed the operation of the demo application, details below.
Details:
+ portSWITCH_CONTEXT() replaced by vPortFirstContext().
+ pxPortInitialiseStack() modified to replicate the stack used by the
compiler.
+ portasm.asm file removed.
+ portasm.h introduced. This contains macro definitions for
portSWITCH_CONTEXT() and portFIRST_CONTEXT().
+ Context switch from ISR now uses the compiler generated interrupt
mechanism. This is done simply by calling portSWITCH_CONTEXT and leaving
the save/restore to compiler generated code.
+ Calls to taskYIELD() during ISR's have been replaced by calling the
simpler and faster portSWITCH_CONTEXT().
+ The Flashlite 186 port now uses 186 instruction set (used to use 80x86
instructions only).
+ The blocking queue tasks within the demo application did not operate
quite as described. This has been corrected.
+ The priority of the comtest Rx task within the demo application has been
lowered. Received characters are now processed (read from the queue) at
the idle priority, allowing low priority tasks to run evenly at times of
a high communications overhead.
+ Prevent the call to kbhit() in main.c for debug builds as the debugger
seems to have problems stepping over the call. This if for the PC port
only.