/*
 * FreeRTOS Kernel V10.1.0
 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */


/*-----------------------------------------------------------
 * Implementation of functions defined in portable.h for the Atmel AT91R40008
 * port.
 *
 * Components that can be compiled to either ARM or THUMB mode are
 * contained in this file.  The ISR routines, which can only be compiled
 * to ARM mode are contained in portISR.c.
 *----------------------------------------------------------*/

/* Standard includes. */
#include <stdlib.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Hardware specific definitions. */
#include "AT91R40008.h"
#include "pio.h"
#include "aic.h"
#include "tc.h"

/* Constants required to setup the task context. */
#define portINITIAL_SPSR				( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT				( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE			( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING	( ( StackType_t ) 0 )
#define portTICK_PRIORITY_6				( 6 )
/*-----------------------------------------------------------*/

/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void );

/* 
 * The scheduler can only be started from ARM mode, so 
 * vPortISRStartFirstSTask() is defined in portISR.c. 
 */
extern void vPortISRStartFirstTask( void );

/*-----------------------------------------------------------*/

/* 
 * Initialise the stack of a task to look exactly as if a call to 
 * portSAVE_CONTEXT had been called.
 *
 * See header file for description. 
 */
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t *pxOriginalTOS;

	pxOriginalTOS = pxTopOfStack;
	
	/* To ensure asserts in tasks.c don't fail, although in this case the assert
	is not really required. */
	pxTopOfStack--;

	/* Setup the initial stack of the task.  The stack is set exactly as 
	expected by the portRESTORE_CONTEXT() macro. */

	/* First on the stack is the return address - which in this case is the
	start of the task.  The offset is added to make the return address appear
	as it would within an IRQ ISR. */
	*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;		
	pxTopOfStack--;

	*pxTopOfStack = ( StackType_t ) 0xaaaaaaaa;	/* R14 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
	pxTopOfStack--;
	*pxTopOfStack = ( StackType_t ) 0x12121212;	/* R12 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x11111111;	/* R11 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x10101010;	/* R10 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x09090909;	/* R9 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x08080808;	/* R8 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x07070707;	/* R7 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x06060606;	/* R6 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x05050505;	/* R5 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x04040404;	/* R4 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x03030303;	/* R3 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x02020202;	/* R2 */
	pxTopOfStack--;	
	*pxTopOfStack = ( StackType_t ) 0x01010101;	/* R1 */
	pxTopOfStack--;	

	/* When the task starts is will expect to find the function parameter in
	R0. */
	*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
	pxTopOfStack--;

	/* The last thing onto the stack is the status register, which is set for
	system mode, with interrupts enabled. */
	*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;

	#ifdef THUMB_INTERWORK
	{
		/* We want the task to start in thumb mode. */
		*pxTopOfStack |= portTHUMB_MODE_BIT;
	}
	#endif

	pxTopOfStack--;

	/* Some optimisation levels use the stack differently to others.  This 
	means the interrupt flags cannot always be stored on the stack and will
	instead be stored in a variable, which is then saved as part of the
	tasks context. */
	*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;

	return pxTopOfStack;
}
/*-----------------------------------------------------------*/

BaseType_t xPortStartScheduler( void )
{
	/* Start the timer that generates the tick ISR.  Interrupts are disabled
	here already. */
	prvSetupTimerInterrupt();

	/* Start the first task. */
	vPortISRStartFirstTask();	

	/* Should not get here! */
	return 0;
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
	/* It is unlikely that the ARM port will require this function as there
	is nothing to return to.  */
}
/*-----------------------------------------------------------*/

/*
 * Setup the tick timer to generate the tick interrupts at the required frequency.
 */
static void prvSetupTimerInterrupt( void )
{
volatile uint32_t ulDummy;

	/* Enable clock to the tick timer... */
	AT91C_BASE_PS->PS_PCER = portTIMER_CLK_ENABLE_BIT;

	/* Stop the tick timer... */
	portTIMER_REG_BASE_PTR->TC_CCR = TC_CLKDIS;

	/* Start with tick timer interrupts disabled... */
	portTIMER_REG_BASE_PTR->TC_IDR = 0xFFFFFFFF;

	/* Clear any pending tick timer interrupts... */
	ulDummy = portTIMER_REG_BASE_PTR->TC_SR;

	/* Store interrupt handler function address in tick timer vector register...
	The ISR installed depends on whether the preemptive or cooperative
	scheduler is being used. */
	#if configUSE_PREEMPTION == 1
	{
		extern void ( vPreemptiveTick )( void );
		AT91C_BASE_AIC->AIC_SVR[portTIMER_AIC_CHANNEL] = ( uint32_t ) vPreemptiveTick;
	}
	#else  // else use cooperative scheduler
	{
		extern void ( vNonPreemptiveTick )( void );
		AT91C_BASE_AIC->AIC_SVR[portTIMER_AIC_CHANNEL] = ( uint32_t ) vNonPreemptiveTick;
	}
	#endif

	/* Tick timer interrupt level-sensitive, priority 6... */
	AT91C_BASE_AIC->AIC_SMR[ portTIMER_AIC_CHANNEL ] = AIC_SRCTYPE_INT_LEVEL_SENSITIVE | portTICK_PRIORITY_6;

	/* Enable the tick timer interrupt...

	First at timer level */
	portTIMER_REG_BASE_PTR->TC_IER = TC_CPCS;

	/* Then at the AIC level. */
	AT91C_BASE_AIC->AIC_IECR = (1 << portTIMER_AIC_CHANNEL);

	/* Calculate timer compare value to achieve the desired tick rate... */
	if( (configCPU_CLOCK_HZ / (configTICK_RATE_HZ * 2) ) <= 0xFFFF )
	{
		/* The tick rate is fast enough for us to use the faster timer input
		clock (main clock / 2). */
		portTIMER_REG_BASE_PTR->TC_CMR = TC_WAVE | TC_CLKS_MCK2 | TC_BURST_NONE | TC_CPCTRG;
		portTIMER_REG_BASE_PTR->TC_RC  = configCPU_CLOCK_HZ / (configTICK_RATE_HZ * 2);
	}
	else
	{
		/* We must use a slower timer input clock (main clock / 8) because the
		tick rate is too slow for the faster input clock. */
		portTIMER_REG_BASE_PTR->TC_CMR = TC_WAVE | TC_CLKS_MCK8 | TC_BURST_NONE | TC_CPCTRG;
		portTIMER_REG_BASE_PTR->TC_RC  = configCPU_CLOCK_HZ / (configTICK_RATE_HZ * 8);
	}

	/* Start tick timer... */
	portTIMER_REG_BASE_PTR->TC_CCR = TC_SWTRG | TC_CLKEN;
}
/*-----------------------------------------------------------*/