Google Git
Sign in
pigweed / third_party / github / FreeRTOS / FreeRTOS-Kernel / refs/heads/main / . / portable / IAR / ARM_CM33_NTZ / non_secure / port.c
blob: 75e9ea9dd751d94e97ca714c4b143e087b43196c [file] [log] [blame] [edit]
/*
* FreeRTOS Kernel <DEVELOPMENT BRANCH>
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
* all the API functions to use the MPU wrappers. That should only be done when
* task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* MPU includes. */
#include "mpu_wrappers.h"
#include "mpu_syscall_numbers.h"
/* Portasm includes. */
#include "portasm.h"
#if ( configENABLE_TRUSTZONE == 1 )
/* Secure components includes. */
#include "secure_context.h"
#include "secure_init.h"
#endif /* configENABLE_TRUSTZONE */
#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/**
* The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
* i.e. the processor boots as secure and never jumps to the non-secure side.
* The Trust Zone support in the port must be disabled in order to run FreeRTOS
* on the secure side. The following are the valid configuration seetings:
*
* 1. Run FreeRTOS on the Secure Side:
* configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
*
* 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
* configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
*
* 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
* configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
*/
#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
#error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
#endif
/**
* Cortex-M23 does not have non-secure PSPLIM. We should use PSPLIM on Cortex-M23
* only when FreeRTOS runs on secure side.
*/
#if ( ( portHAS_ARMV8M_MAIN_EXTENSION == 0 ) && ( configRUN_FREERTOS_SECURE_ONLY == 0 ) )
#define portUSE_PSPLIM_REGISTER 0
#else
#define portUSE_PSPLIM_REGISTER 1
#endif
/*-----------------------------------------------------------*/
/**
* @brief Prototype of all Interrupt Service Routines (ISRs).
*/
typedef void ( * portISR_t )( void );
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the NVIC.
*/
#define portNVIC_SYSTICK_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000e010 ) )
#define portNVIC_SYSTICK_LOAD_REG ( *( ( volatile uint32_t * ) 0xe000e014 ) )
#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( *( ( volatile uint32_t * ) 0xe000e018 ) )
#define portNVIC_SHPR3_REG ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL )
#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL )
#define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL )
#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL )
#define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL )
#define portNVIC_PEND_SYSTICK_SET_BIT ( 1UL << 26UL )
#define portMIN_INTERRUPT_PRIORITY ( 255UL )
#define portNVIC_PENDSV_PRI ( portMIN_INTERRUPT_PRIORITY << 16UL )
#define portNVIC_SYSTICK_PRI ( portMIN_INTERRUPT_PRIORITY << 24UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the SCB.
*/
#define portSCB_VTOR_REG ( *( ( portISR_t ** ) 0xe000ed08 ) )
#define portSCB_SYS_HANDLER_CTRL_STATE_REG ( *( ( volatile uint32_t * ) 0xe000ed24 ) )
#define portSCB_MEM_FAULT_ENABLE_BIT ( 1UL << 16UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants used to check the installation of the FreeRTOS interrupt handlers.
*/
#define portVECTOR_INDEX_SVC ( 11 )
#define portVECTOR_INDEX_PENDSV ( 14 )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to check the validity of an interrupt priority.
*/
#define portNVIC_SHPR2_REG ( *( ( volatile uint32_t * ) 0xE000ED1C ) )
#define portFIRST_USER_INTERRUPT_NUMBER ( 16 )
#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 )
#define portAIRCR_REG ( *( ( volatile uint32_t * ) 0xE000ED0C ) )
#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 )
#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 )
#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL )
#define portPRIGROUP_SHIFT ( 8UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants used during system call enter and exit.
*/
#define portPSR_STACK_PADDING_MASK ( 1UL << 9UL )
#define portEXC_RETURN_STACK_FRAME_TYPE_MASK ( 1UL << 4UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the FPU.
*/
#define portCPACR ( ( volatile uint32_t * ) 0xe000ed88 ) /* Coprocessor Access Control Register. */
#define portCPACR_CP10_VALUE ( 3UL )
#define portCPACR_CP11_VALUE portCPACR_CP10_VALUE
#define portCPACR_CP10_POS ( 20UL )
#define portCPACR_CP11_POS ( 22UL )
#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating Point Context Control Register. */
#define portFPCCR_ASPEN_POS ( 31UL )
#define portFPCCR_ASPEN_MASK ( 1UL << portFPCCR_ASPEN_POS )
#define portFPCCR_LSPEN_POS ( 30UL )
#define portFPCCR_LSPEN_MASK ( 1UL << portFPCCR_LSPEN_POS )
/*-----------------------------------------------------------*/
/**
* @brief Offsets in the stack to the parameters when inside the SVC handler.
*/
#define portOFFSET_TO_LR ( 5 )
#define portOFFSET_TO_PC ( 6 )
#define portOFFSET_TO_PSR ( 7 )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the MPU.
*/
#define portMPU_TYPE_REG ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
#define portMPU_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
#define portMPU_RNR_REG ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
#define portMPU_RBAR_REG ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
#define portMPU_RLAR_REG ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
#define portMPU_RBAR_A1_REG ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
#define portMPU_RLAR_A1_REG ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
#define portMPU_RBAR_A2_REG ( *( ( volatile uint32_t * ) 0xe000edac ) )
#define portMPU_RLAR_A2_REG ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
#define portMPU_RBAR_A3_REG ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
#define portMPU_RLAR_A3_REG ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
#define portMPU_MAIR0_REG ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
#define portMPU_MAIR1_REG ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
#define portMPU_RBAR_ADDRESS_MASK ( 0xffffffe0 ) /* Must be 32-byte aligned. */
#define portMPU_RLAR_ADDRESS_MASK ( 0xffffffe0 ) /* Must be 32-byte aligned. */
#define portMPU_RBAR_ACCESS_PERMISSIONS_MASK ( 3UL << 1UL )
#define portMPU_MAIR_ATTR0_POS ( 0UL )
#define portMPU_MAIR_ATTR0_MASK ( 0x000000ff )
#define portMPU_MAIR_ATTR1_POS ( 8UL )
#define portMPU_MAIR_ATTR1_MASK ( 0x0000ff00 )
#define portMPU_MAIR_ATTR2_POS ( 16UL )
#define portMPU_MAIR_ATTR2_MASK ( 0x00ff0000 )
#define portMPU_MAIR_ATTR3_POS ( 24UL )
#define portMPU_MAIR_ATTR3_MASK ( 0xff000000 )
#define portMPU_MAIR_ATTR4_POS ( 0UL )
#define portMPU_MAIR_ATTR4_MASK ( 0x000000ff )
#define portMPU_MAIR_ATTR5_POS ( 8UL )
#define portMPU_MAIR_ATTR5_MASK ( 0x0000ff00 )
#define portMPU_MAIR_ATTR6_POS ( 16UL )
#define portMPU_MAIR_ATTR6_MASK ( 0x00ff0000 )
#define portMPU_MAIR_ATTR7_POS ( 24UL )
#define portMPU_MAIR_ATTR7_MASK ( 0xff000000 )
#define portMPU_RLAR_ATTR_INDEX0 ( 0UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX1 ( 1UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX2 ( 2UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX3 ( 3UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX4 ( 4UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX5 ( 5UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX6 ( 6UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX7 ( 7UL << 1UL )
#define portMPU_RLAR_REGION_ENABLE ( 1UL )
#if ( portARMV8M_MINOR_VERSION >= 1 )
/* Enable Privileged eXecute Never MPU attribute for the selected memory
* region. */
#define portMPU_RLAR_PRIVILEGED_EXECUTE_NEVER ( 1UL << 4UL )
#endif /* portARMV8M_MINOR_VERSION >= 1 */
/* Enable privileged access to unmapped region. */
#define portMPU_PRIV_BACKGROUND_ENABLE_BIT ( 1UL << 2UL )
/* Enable MPU. */
#define portMPU_ENABLE_BIT ( 1UL << 0UL )
/* Expected value of the portMPU_TYPE register. */
#define portEXPECTED_MPU_TYPE_VALUE ( configTOTAL_MPU_REGIONS << 8UL )
/* Extract first address of the MPU region as encoded in the
* RBAR (Region Base Address Register) value. */
#define portEXTRACT_FIRST_ADDRESS_FROM_RBAR( rbar ) \
( ( rbar ) & portMPU_RBAR_ADDRESS_MASK )
/* Extract last address of the MPU region as encoded in the
* RLAR (Region Limit Address Register) value. */
#define portEXTRACT_LAST_ADDRESS_FROM_RLAR( rlar ) \
( ( ( rlar ) & portMPU_RLAR_ADDRESS_MASK ) | ~portMPU_RLAR_ADDRESS_MASK )
/* Does addr lies within [start, end] address range? */
#define portIS_ADDRESS_WITHIN_RANGE( addr, start, end ) \
( ( ( addr ) >= ( start ) ) && ( ( addr ) <= ( end ) ) )
/* Is the access request satisfied by the available permissions? */
#define portIS_AUTHORIZED( accessRequest, permissions ) \
( ( ( permissions ) & ( accessRequest ) ) == accessRequest )
/* Max value that fits in a uint32_t type. */
#define portUINT32_MAX ( ~( ( uint32_t ) 0 ) )
/* Check if adding a and b will result in overflow. */
#define portADD_UINT32_WILL_OVERFLOW( a, b ) ( ( a ) > ( portUINT32_MAX - ( b ) ) )
/*-----------------------------------------------------------*/
/**
* @brief The maximum 24-bit number.
*
* It is needed because the systick is a 24-bit counter.
*/
#define portMAX_24_BIT_NUMBER ( 0xffffffUL )
/**
* @brief A fiddle factor to estimate the number of SysTick counts that would
* have occurred while the SysTick counter is stopped during tickless idle
* calculations.
*/
#define portMISSED_COUNTS_FACTOR ( 94UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to set up the initial stack.
*/
#define portINITIAL_XPSR ( 0x01000000 )
#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
/**
* @brief Initial EXC_RETURN value.
*
* FF FF FF FD
* 1111 1111 1111 1111 1111 1111 1111 1101
*
* Bit[6] - 1 --> The exception was taken from the Secure state.
* Bit[5] - 1 --> Do not skip stacking of additional state context.
* Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
* Bit[3] - 1 --> Return to the Thread mode.
* Bit[2] - 1 --> Restore registers from the process stack.
* Bit[1] - 0 --> Reserved, 0.
* Bit[0] - 1 --> The exception was taken to the Secure state.
*/
#define portINITIAL_EXC_RETURN ( 0xfffffffd )
#else
/**
* @brief Initial EXC_RETURN value.
*
* FF FF FF BC
* 1111 1111 1111 1111 1111 1111 1011 1100
*
* Bit[6] - 0 --> The exception was taken from the Non-Secure state.
* Bit[5] - 1 --> Do not skip stacking of additional state context.
* Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
* Bit[3] - 1 --> Return to the Thread mode.
* Bit[2] - 1 --> Restore registers from the process stack.
* Bit[1] - 0 --> Reserved, 0.
* Bit[0] - 0 --> The exception was taken to the Non-Secure state.
*/
#define portINITIAL_EXC_RETURN ( 0xffffffbc )
#endif /* configRUN_FREERTOS_SECURE_ONLY */
/**
* @brief CONTROL register privileged bit mask.
*
* Bit[0] in CONTROL register tells the privilege:
* Bit[0] = 0 ==> The task is privileged.
* Bit[0] = 1 ==> The task is not privileged.
*/
#define portCONTROL_PRIVILEGED_MASK ( 1UL << 0UL )
/**
* @brief Initial CONTROL register values.
*/
#define portINITIAL_CONTROL_UNPRIVILEGED ( 0x3 )
#define portINITIAL_CONTROL_PRIVILEGED ( 0x2 )
/**
* @brief Let the user override the default SysTick clock rate. If defined by the
* user, this symbol must equal the SysTick clock rate when the CLK bit is 0 in the
* configuration register.
*/
#ifndef configSYSTICK_CLOCK_HZ
#define configSYSTICK_CLOCK_HZ ( configCPU_CLOCK_HZ )
/* Ensure the SysTick is clocked at the same frequency as the core. */
#define portNVIC_SYSTICK_CLK_BIT_CONFIG ( portNVIC_SYSTICK_CLK_BIT )
#else
/* Select the option to clock SysTick not at the same frequency as the core. */
#define portNVIC_SYSTICK_CLK_BIT_CONFIG ( 0 )
#endif
/**
* @brief Let the user override the pre-loading of the initial LR with the
* address of prvTaskExitError() in case it messes up unwinding of the stack
* in the debugger.
*/
#ifdef configTASK_RETURN_ADDRESS
#define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
#else
#define portTASK_RETURN_ADDRESS prvTaskExitError
#endif
/**
* @brief If portPRELOAD_REGISTERS then registers will be given an initial value
* when a task is created. This helps in debugging at the cost of code size.
*/
#define portPRELOAD_REGISTERS 1
/**
* @brief A task is created without a secure context, and must call
* portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
* any secure calls.
*/
#define portNO_SECURE_CONTEXT 0
/*-----------------------------------------------------------*/
/**
* @brief Used to catch tasks that attempt to return from their implementing
* function.
*/
static void prvTaskExitError( void );
#if ( configENABLE_MPU == 1 )
/**
* @brief Extract MPU region's access permissions from the Region Base Address
* Register (RBAR) value.
*
* @param ulRBARValue RBAR value for the MPU region.
*
* @return uint32_t Access permissions.
*/
static uint32_t prvGetRegionAccessPermissions( uint32_t ulRBARValue ) PRIVILEGED_FUNCTION;
#endif /* configENABLE_MPU */
#if ( configENABLE_MPU == 1 )
/**
* @brief Setup the Memory Protection Unit (MPU).
*/
static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
#endif /* configENABLE_MPU */
#if ( configENABLE_FPU == 1 )
/**
* @brief Setup the Floating Point Unit (FPU).
*/
static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
#endif /* configENABLE_FPU */
/**
* @brief Setup the timer to generate the tick interrupts.
*
* The implementation in this file is weak to allow application writers to
* change the timer used to generate the tick interrupt.
*/
void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
/**
* @brief Checks whether the current execution context is interrupt.
*
* @return pdTRUE if the current execution context is interrupt, pdFALSE
* otherwise.
*/
BaseType_t xPortIsInsideInterrupt( void );
/**
* @brief Yield the processor.
*/
void vPortYield( void ) PRIVILEGED_FUNCTION;
/**
* @brief Enter critical section.
*/
void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
/**
* @brief Exit from critical section.
*/
void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
/**
* @brief SysTick handler.
*/
void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
/**
* @brief C part of SVC handler.
*/
portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
/**
* @brief Sets up the system call stack so that upon returning from
* SVC, the system call stack is used.
*
* @param pulTaskStack The current SP when the SVC was raised.
* @param ulLR The value of Link Register (EXC_RETURN) in the SVC handler.
* @param ucSystemCallNumber The system call number of the system call.
*/
void vSystemCallEnter( uint32_t * pulTaskStack,
uint32_t ulLR,
uint8_t ucSystemCallNumber ) PRIVILEGED_FUNCTION;
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
/**
* @brief Raise SVC for exiting from a system call.
*/
void vRequestSystemCallExit( void ) __attribute__( ( naked ) ) PRIVILEGED_FUNCTION;
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
/**
* @brief Sets up the task stack so that upon returning from
* SVC, the task stack is used again.
*
* @param pulSystemCallStack The current SP when the SVC was raised.
* @param ulLR The value of Link Register (EXC_RETURN) in the SVC handler.
*/
void vSystemCallExit( uint32_t * pulSystemCallStack,
uint32_t ulLR ) PRIVILEGED_FUNCTION;
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
#if ( configENABLE_MPU == 1 )
/**
* @brief Checks whether or not the calling task is privileged.
*
* @return pdTRUE if the calling task is privileged, pdFALSE otherwise.
*/
BaseType_t xPortIsTaskPrivileged( void ) PRIVILEGED_FUNCTION;
#endif /* configENABLE_MPU == 1 */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
/**
* @brief This variable is set to pdTRUE when the scheduler is started.
*/
PRIVILEGED_DATA static BaseType_t xSchedulerRunning = pdFALSE;
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/**
* @brief Each task maintains its own interrupt status in the critical nesting
* variable.
*/
PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
#if ( configENABLE_TRUSTZONE == 1 )
/**
* @brief Saved as part of the task context to indicate which context the
* task is using on the secure side.
*/
PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
#endif /* configENABLE_TRUSTZONE */
/**
* @brief Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure
* FreeRTOS API functions are not called from interrupts that have been assigned
* a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY.
*/
#if ( ( configASSERT_DEFINED == 1 ) && ( portHAS_ARMV8M_MAIN_EXTENSION == 1 ) )
static uint8_t ucMaxSysCallPriority = 0;
static uint32_t ulMaxPRIGROUPValue = 0;
static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16;
#endif /* #if ( ( configASSERT_DEFINED == 1 ) && ( portHAS_ARMV8M_MAIN_EXTENSION == 1 ) ) */
#if ( configUSE_TICKLESS_IDLE == 1 )
/**
* @brief The number of SysTick increments that make up one tick period.
*/
PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
/**
* @brief The maximum number of tick periods that can be suppressed is
* limited by the 24 bit resolution of the SysTick timer.
*/
PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
/**
* @brief Compensate for the CPU cycles that pass while the SysTick is
* stopped (low power functionality only).
*/
PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
#endif /* configUSE_TICKLESS_IDLE */
/*-----------------------------------------------------------*/
#if ( configUSE_TICKLESS_IDLE == 1 )
__attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
{
uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickDecrementsLeft;
TickType_t xModifiableIdleTime;
/* Make sure the SysTick reload value does not overflow the counter. */
if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
{
xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
}
/* Enter a critical section but don't use the taskENTER_CRITICAL()
* method as that will mask interrupts that should exit sleep mode. */
__asm volatile ( "cpsid i" ::: "memory" );
__asm volatile ( "dsb" );
__asm volatile ( "isb" );
/* If a context switch is pending or a task is waiting for the scheduler
* to be unsuspended then abandon the low power entry. */
if( eTaskConfirmSleepModeStatus() == eAbortSleep )
{
/* Re-enable interrupts - see comments above the cpsid instruction
* above. */
__asm volatile ( "cpsie i" ::: "memory" );
}
else
{
/* Stop the SysTick momentarily. The time the SysTick is stopped for
* is accounted for as best it can be, but using the tickless mode will
* inevitably result in some tiny drift of the time maintained by the
* kernel with respect to calendar time. */
portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT_CONFIG | portNVIC_SYSTICK_INT_BIT );
/* Use the SysTick current-value register to determine the number of
* SysTick decrements remaining until the next tick interrupt. If the
* current-value register is zero, then there are actually
* ulTimerCountsForOneTick decrements remaining, not zero, because the
* SysTick requests the interrupt when decrementing from 1 to 0. */
ulSysTickDecrementsLeft = portNVIC_SYSTICK_CURRENT_VALUE_REG;
if( ulSysTickDecrementsLeft == 0 )
{
ulSysTickDecrementsLeft = ulTimerCountsForOneTick;
}
/* Calculate the reload value required to wait xExpectedIdleTime
* tick periods. -1 is used because this code normally executes part
* way through the first tick period. But if the SysTick IRQ is now
* pending, then clear the IRQ, suppressing the first tick, and correct
* the reload value to reflect that the second tick period is already
* underway. The expected idle time is always at least two ticks. */
ulReloadValue = ulSysTickDecrementsLeft + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
if( ( portNVIC_INT_CTRL_REG & portNVIC_PEND_SYSTICK_SET_BIT ) != 0 )
{
portNVIC_INT_CTRL_REG = portNVIC_PEND_SYSTICK_CLEAR_BIT;
ulReloadValue -= ulTimerCountsForOneTick;
}
if( ulReloadValue > ulStoppedTimerCompensation )
{
ulReloadValue -= ulStoppedTimerCompensation;
}
/* Set the new reload value. */
portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
/* Clear the SysTick count flag and set the count value back to
* zero. */
portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
/* Restart SysTick. */
portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
/* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
* set its parameter to 0 to indicate that its implementation contains
* its own wait for interrupt or wait for event instruction, and so wfi
* should not be executed again. However, the original expected idle
* time variable must remain unmodified, so a copy is taken. */
xModifiableIdleTime = xExpectedIdleTime;
configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
if( xModifiableIdleTime > 0 )
{
__asm volatile ( "dsb" ::: "memory" );
__asm volatile ( "wfi" );
__asm volatile ( "isb" );
}
configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
/* Re-enable interrupts to allow the interrupt that brought the MCU
* out of sleep mode to execute immediately. See comments above
* the cpsid instruction above. */
__asm volatile ( "cpsie i" ::: "memory" );
__asm volatile ( "dsb" );
__asm volatile ( "isb" );
/* Disable interrupts again because the clock is about to be stopped
* and interrupts that execute while the clock is stopped will increase
* any slippage between the time maintained by the RTOS and calendar
* time. */
__asm volatile ( "cpsid i" ::: "memory" );
__asm volatile ( "dsb" );
__asm volatile ( "isb" );
/* Disable the SysTick clock without reading the
* portNVIC_SYSTICK_CTRL_REG register to ensure the
* portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again,
* the time the SysTick is stopped for is accounted for as best it can
* be, but using the tickless mode will inevitably result in some tiny
* drift of the time maintained by the kernel with respect to calendar
* time*/
portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT_CONFIG | portNVIC_SYSTICK_INT_BIT );
/* Determine whether the SysTick has already counted to zero. */
if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
{
uint32_t ulCalculatedLoadValue;
/* The tick interrupt ended the sleep (or is now pending), and
* a new tick period has started. Reset portNVIC_SYSTICK_LOAD_REG
* with whatever remains of the new tick period. */
ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
/* Don't allow a tiny value, or values that have somehow
* underflowed because the post sleep hook did something
* that took too long or because the SysTick current-value register
* is zero. */
if( ( ulCalculatedLoadValue <= ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
{
ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
}
portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
/* As the pending tick will be processed as soon as this
* function exits, the tick value maintained by the tick is stepped
* forward by one less than the time spent waiting. */
ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
}
else
{
/* Something other than the tick interrupt ended the sleep. */
/* Use the SysTick current-value register to determine the
* number of SysTick decrements remaining until the expected idle
* time would have ended. */
ulSysTickDecrementsLeft = portNVIC_SYSTICK_CURRENT_VALUE_REG;
#if ( portNVIC_SYSTICK_CLK_BIT_CONFIG != portNVIC_SYSTICK_CLK_BIT )
{
/* If the SysTick is not using the core clock, the current-
* value register might still be zero here. In that case, the
* SysTick didn't load from the reload register, and there are
* ulReloadValue decrements remaining in the expected idle
* time, not zero. */
if( ulSysTickDecrementsLeft == 0 )
{
ulSysTickDecrementsLeft = ulReloadValue;
}
}
#endif /* portNVIC_SYSTICK_CLK_BIT_CONFIG */
/* Work out how long the sleep lasted rounded to complete tick
* periods (not the ulReload value which accounted for part
* ticks). */
ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - ulSysTickDecrementsLeft;
/* How many complete tick periods passed while the processor
* was waiting? */
ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
/* The reload value is set to whatever fraction of a single tick
* period remains. */
portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
}
/* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG again,
* then set portNVIC_SYSTICK_LOAD_REG back to its standard value. If
* the SysTick is not using the core clock, temporarily configure it to
* use the core clock. This configuration forces the SysTick to load
* from portNVIC_SYSTICK_LOAD_REG immediately instead of at the next
* cycle of the other clock. Then portNVIC_SYSTICK_LOAD_REG is ready
* to receive the standard value immediately. */
portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
#if ( portNVIC_SYSTICK_CLK_BIT_CONFIG == portNVIC_SYSTICK_CLK_BIT )
{
portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
}
#else
{
/* The temporary usage of the core clock has served its purpose,
* as described above. Resume usage of the other clock. */
portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT;
if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
{
/* The partial tick period already ended. Be sure the SysTick
* counts it only once. */
portNVIC_SYSTICK_CURRENT_VALUE_REG = 0;
}
portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT_CONFIG | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
}
#endif /* portNVIC_SYSTICK_CLK_BIT_CONFIG */
/* Step the tick to account for any tick periods that elapsed. */
vTaskStepTick( ulCompleteTickPeriods );
/* Exit with interrupts enabled. */
__asm volatile ( "cpsie i" ::: "memory" );
}
}
#endif /* configUSE_TICKLESS_IDLE */
/*-----------------------------------------------------------*/
__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
{
/* Calculate the constants required to configure the tick interrupt. */
#if ( configUSE_TICKLESS_IDLE == 1 )
{
ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
}
#endif /* configUSE_TICKLESS_IDLE */
/* Stop and reset SysTick.
*
* QEMU versions older than 7.0.0 contain a bug which causes an error if we
* enable SysTick without first selecting a valid clock source. We trigger
* the bug if we change clock sources from a clock with a zero clock period
* to one with a nonzero clock period and enable Systick at the same time.
* So we configure the CLKSOURCE bit here, prior to setting the ENABLE bit.
* This workaround avoids the bug in QEMU versions older than 7.0.0. */
portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT_CONFIG;
portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
/* Configure SysTick to interrupt at the requested rate. */
portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT_CONFIG | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
}
/*-----------------------------------------------------------*/
static void prvTaskExitError( void )
{
volatile uint32_t ulDummy = 0UL;
/* A function that implements a task must not exit or attempt to return to
* its caller as there is nothing to return to. If a task wants to exit it
* should instead call vTaskDelete( NULL ). Artificially force an assert()
* to be triggered if configASSERT() is defined, then stop here so
* application writers can catch the error. */
configASSERT( ulCriticalNesting == ~0UL );
portDISABLE_INTERRUPTS();
while( ulDummy == 0 )
{
/* This file calls prvTaskExitError() after the scheduler has been
* started to remove a compiler warning about the function being
* defined but never called. ulDummy is used purely to quieten other
* warnings about code appearing after this function is called - making
* ulDummy volatile makes the compiler think the function could return
* and therefore not output an 'unreachable code' warning for code that
* appears after it. */
}
}
/*-----------------------------------------------------------*/
#if ( configENABLE_MPU == 1 )
static uint32_t prvGetRegionAccessPermissions( uint32_t ulRBARValue ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulAccessPermissions = 0;
if( ( ulRBARValue & portMPU_RBAR_ACCESS_PERMISSIONS_MASK ) == portMPU_REGION_READ_ONLY )
{
ulAccessPermissions = tskMPU_READ_PERMISSION;
}
if( ( ulRBARValue & portMPU_RBAR_ACCESS_PERMISSIONS_MASK ) == portMPU_REGION_READ_WRITE )
{
ulAccessPermissions = ( tskMPU_READ_PERMISSION | tskMPU_WRITE_PERMISSION );
}
return ulAccessPermissions;
}
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
#if ( configENABLE_MPU == 1 )
static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
{
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __privileged_functions_start__;
extern uint32_t * __privileged_functions_end__;
extern uint32_t * __syscalls_flash_start__;
extern uint32_t * __syscalls_flash_end__;
extern uint32_t * __unprivileged_flash_start__;
extern uint32_t * __unprivileged_flash_end__;
extern uint32_t * __privileged_sram_start__;
extern uint32_t * __privileged_sram_end__;
#else /* if defined( __ARMCC_VERSION ) */
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __privileged_functions_start__[];
extern uint32_t __privileged_functions_end__[];
extern uint32_t __syscalls_flash_start__[];
extern uint32_t __syscalls_flash_end__[];
extern uint32_t __unprivileged_flash_start__[];
extern uint32_t __unprivileged_flash_end__[];
extern uint32_t __privileged_sram_start__[];
extern uint32_t __privileged_sram_end__[];
#endif /* defined( __ARMCC_VERSION ) */
/* The only permitted number of regions are 8 or 16. */
configASSERT( ( configTOTAL_MPU_REGIONS == 8 ) || ( configTOTAL_MPU_REGIONS == 16 ) );
/* Ensure that the configTOTAL_MPU_REGIONS is configured correctly. */
configASSERT( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE );
/* Check that the MPU is present. */
if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
{
/* MAIR0 - Index 0. */
portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
/* MAIR0 - Index 1. */
portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
/* Setup privileged flash as Read Only so that privileged tasks can
* read it but not modify. */
portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_PRIVILEGED_READ_ONLY );
portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Setup unprivileged flash as Read Only by both privileged and
* unprivileged tasks. All tasks can read it but no-one can modify. */
portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_READ_ONLY );
portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Setup unprivileged syscalls flash as Read Only by both privileged
* and unprivileged tasks. All tasks can read it but no-one can modify. */
portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_READ_ONLY );
portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Setup RAM containing kernel data for privileged access only. */
portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
( portMPU_REGION_EXECUTE_NEVER );
portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Enable mem fault. */
portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
/* Enable MPU with privileged background access i.e. unmapped
* regions have privileged access. */
portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
}
}
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
#if ( configENABLE_FPU == 1 )
static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
{
#if ( configENABLE_TRUSTZONE == 1 )
{
/* Enable non-secure access to the FPU. */
SecureInit_EnableNSFPUAccess();
}
#endif /* configENABLE_TRUSTZONE */
/* CP10 = 11 ==> Full access to FPU i.e. both privileged and
* unprivileged code should be able to access FPU. CP11 should be
* programmed to the same value as CP10. */
*( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
);
/* ASPEN = 1 ==> Hardware should automatically preserve floating point
* context on exception entry and restore on exception return.
* LSPEN = 1 ==> Enable lazy context save of FP state. */
*( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
}
#endif /* configENABLE_FPU */
/*-----------------------------------------------------------*/
void vPortYield( void ) /* PRIVILEGED_FUNCTION */
{
/* Set a PendSV to request a context switch. */
portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
/* Barriers are normally not required but do ensure the code is
* completely within the specified behaviour for the architecture. */
__asm volatile ( "dsb" ::: "memory" );
__asm volatile ( "isb" );
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
{
portDISABLE_INTERRUPTS();
ulCriticalNesting++;
/* Barriers are normally not required but do ensure the code is
* completely within the specified behaviour for the architecture. */
__asm volatile ( "dsb" ::: "memory" );
__asm volatile ( "isb" );
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
{
configASSERT( ulCriticalNesting );
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
}
/*-----------------------------------------------------------*/
void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulPreviousMask;
ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
traceISR_ENTER();
{
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
traceISR_EXIT_TO_SCHEDULER();
/* Pend a context switch. */
portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
}
else
{
traceISR_EXIT();
}
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
}
/*-----------------------------------------------------------*/
void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
{
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 1 ) )
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __syscalls_flash_start__;
extern uint32_t * __syscalls_flash_end__;
#else
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __syscalls_flash_start__[];
extern uint32_t __syscalls_flash_end__[];
#endif /* defined( __ARMCC_VERSION ) */
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 1 ) */
uint32_t ulPC;
#if ( configENABLE_TRUSTZONE == 1 )
uint32_t ulR0, ulR1;
extern TaskHandle_t pxCurrentTCB;
#if ( configENABLE_MPU == 1 )
uint32_t ulControl, ulIsTaskPrivileged;
#endif /* configENABLE_MPU */
#endif /* configENABLE_TRUSTZONE */
uint8_t ucSVCNumber;
/* Register are stored on the stack in the following order - R0, R1, R2, R3,
* R12, LR, PC, xPSR. */
ulPC = pulCallerStackAddress[ portOFFSET_TO_PC ];
ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
switch( ucSVCNumber )
{
#if ( configENABLE_TRUSTZONE == 1 )
case portSVC_ALLOCATE_SECURE_CONTEXT:
/* R0 contains the stack size passed as parameter to the
* vPortAllocateSecureContext function. */
ulR0 = pulCallerStackAddress[ 0 ];
#if ( configENABLE_MPU == 1 )
{
/* Read the CONTROL register value. */
__asm volatile ( "mrs %0, control" : "=r" ( ulControl ) );
/* The task that raised the SVC is privileged if Bit[0]
* in the CONTROL register is 0. */
ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged, pxCurrentTCB );
}
#else /* if ( configENABLE_MPU == 1 ) */
{
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, pxCurrentTCB );
}
#endif /* configENABLE_MPU */
configASSERT( xSecureContext != securecontextINVALID_CONTEXT_ID );
SecureContext_LoadContext( xSecureContext, pxCurrentTCB );
break;
case portSVC_FREE_SECURE_CONTEXT:
/* R0 contains TCB being freed and R1 contains the secure
* context handle to be freed. */
ulR0 = pulCallerStackAddress[ 0 ];
ulR1 = pulCallerStackAddress[ 1 ];
/* Free the secure context. */
SecureContext_FreeContext( ( SecureContextHandle_t ) ulR1, ( void * ) ulR0 );
break;
#endif /* configENABLE_TRUSTZONE */
case portSVC_START_SCHEDULER:
#if ( configENABLE_TRUSTZONE == 1 )
{
/* De-prioritize the non-secure exceptions so that the
* non-secure pendSV runs at the lowest priority. */
SecureInit_DePrioritizeNSExceptions();
/* Initialize the secure context management system. */
SecureContext_Init();
}
#endif /* configENABLE_TRUSTZONE */
#if ( configENABLE_FPU == 1 )
{
/* Setup the Floating Point Unit (FPU). */
prvSetupFPU();
}
#endif /* configENABLE_FPU */
/* Setup the context of the first task so that the first task starts
* executing. */
vRestoreContextOfFirstTask();
break;
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 1 ) )
case portSVC_RAISE_PRIVILEGE:
/* Only raise the privilege, if the svc was raised from any of
* the system calls. */
if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
{
vRaisePrivilege();
}
break;
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 1 ) */
#if ( configENABLE_MPU == 1 )
case portSVC_YIELD:
vPortYield();
break;
#endif /* configENABLE_MPU == 1 */
default:
/* Incorrect SVC call. */
configASSERT( pdFALSE );
}
}
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
void vSystemCallEnter( uint32_t * pulTaskStack,
uint32_t ulLR,
uint8_t ucSystemCallNumber ) /* PRIVILEGED_FUNCTION */
{
extern TaskHandle_t pxCurrentTCB;
extern UBaseType_t uxSystemCallImplementations[ NUM_SYSTEM_CALLS ];
xMPU_SETTINGS * pxMpuSettings;
uint32_t * pulSystemCallStack;
uint32_t ulStackFrameSize, ulSystemCallLocation, i;
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __syscalls_flash_start__;
extern uint32_t * __syscalls_flash_end__;
#else
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __syscalls_flash_start__[];
extern uint32_t __syscalls_flash_end__[];
#endif /* #if defined( __ARMCC_VERSION ) */
ulSystemCallLocation = pulTaskStack[ portOFFSET_TO_PC ];
pxMpuSettings = xTaskGetMPUSettings( pxCurrentTCB );
/* Checks:
* 1. SVC is raised from the system call section (i.e. application is
* not raising SVC directly).
* 2. pxMpuSettings->xSystemCallStackInfo.pulTaskStack must be NULL as
* it is non-NULL only during the execution of a system call (i.e.
* between system call enter and exit).
* 3. System call is not for a kernel API disabled by the configuration
* in FreeRTOSConfig.h.
* 4. We do not need to check that ucSystemCallNumber is within range
* because the assembly SVC handler checks that before calling
* this function.
*/
if( ( ulSystemCallLocation >= ( uint32_t ) __syscalls_flash_start__ ) &&
( ulSystemCallLocation <= ( uint32_t ) __syscalls_flash_end__ ) &&
( pxMpuSettings->xSystemCallStackInfo.pulTaskStack == NULL ) &&
( uxSystemCallImplementations[ ucSystemCallNumber ] != ( UBaseType_t ) 0 ) )
{
pulSystemCallStack = pxMpuSettings->xSystemCallStackInfo.pulSystemCallStack;
#if ( ( configENABLE_FPU == 1 ) || ( configENABLE_MVE == 1 ) )
{
if( ( ulLR & portEXC_RETURN_STACK_FRAME_TYPE_MASK ) == 0UL )
{
/* Extended frame i.e. FPU in use. */
ulStackFrameSize = 26;
__asm volatile (
" vpush {s0} \n" /* Trigger lazy stacking. */
" vpop {s0} \n" /* Nullify the affect of the above instruction. */
::: "memory"
);
}
else
{
/* Standard frame i.e. FPU not in use. */
ulStackFrameSize = 8;
}
}
#else /* if ( ( configENABLE_FPU == 1 ) || ( configENABLE_MVE == 1 ) ) */
{
ulStackFrameSize = 8;
}
#endif /* configENABLE_FPU || configENABLE_MVE */
/* Make space on the system call stack for the stack frame. */
pulSystemCallStack = pulSystemCallStack - ulStackFrameSize;
/* Copy the stack frame. */
for( i = 0; i < ulStackFrameSize; i++ )
{
pulSystemCallStack[ i ] = pulTaskStack[ i ];
}
/* Store the value of the Link Register before the SVC was raised.
* It contains the address of the caller of the System Call entry
* point (i.e. the caller of the MPU_<API>). We need to restore it
* when we exit from the system call. */
pxMpuSettings->xSystemCallStackInfo.ulLinkRegisterAtSystemCallEntry = pulTaskStack[ portOFFSET_TO_LR ];
/* Store the value of the PSPLIM register before the SVC was raised.
* We need to restore it when we exit from the system call. */
#if ( portUSE_PSPLIM_REGISTER == 1 )
{
__asm volatile ( "mrs %0, psplim" : "=r" ( pxMpuSettings->xSystemCallStackInfo.ulStackLimitRegisterAtSystemCallEntry ) );
}
#endif
/* Use the pulSystemCallStack in thread mode. */
__asm volatile ( "msr psp, %0" : : "r" ( pulSystemCallStack ) );
#if ( portUSE_PSPLIM_REGISTER == 1 )
{
__asm volatile ( "msr psplim, %0" : : "r" ( pxMpuSettings->xSystemCallStackInfo.pulSystemCallStackLimit ) );
}
#endif
/* Start executing the system call upon returning from this handler. */
pulSystemCallStack[ portOFFSET_TO_PC ] = uxSystemCallImplementations[ ucSystemCallNumber ];
/* Raise a request to exit from the system call upon finishing the
* system call. */
pulSystemCallStack[ portOFFSET_TO_LR ] = ( uint32_t ) vRequestSystemCallExit;
/* Remember the location where we should copy the stack frame when we exit from
* the system call. */
pxMpuSettings->xSystemCallStackInfo.pulTaskStack = pulTaskStack + ulStackFrameSize;
/* Record if the hardware used padding to force the stack pointer
* to be double word aligned. */
if( ( pulTaskStack[ portOFFSET_TO_PSR ] & portPSR_STACK_PADDING_MASK ) == portPSR_STACK_PADDING_MASK )
{
pxMpuSettings->ulTaskFlags |= portSTACK_FRAME_HAS_PADDING_FLAG;
}
else
{
pxMpuSettings->ulTaskFlags &= ( ~portSTACK_FRAME_HAS_PADDING_FLAG );
}
/* We ensure in pxPortInitialiseStack that the system call stack is
* double word aligned and therefore, there is no need of padding.
* Clear the bit[9] of stacked xPSR. */
pulSystemCallStack[ portOFFSET_TO_PSR ] &= ( ~portPSR_STACK_PADDING_MASK );
/* Raise the privilege for the duration of the system call. */
__asm volatile (
" mrs r0, control \n" /* Obtain current control value. */
" movs r1, #1 \n" /* r1 = 1. */
" bics r0, r1 \n" /* Clear nPRIV bit. */
" msr control, r0 \n" /* Write back new control value. */
::: "r0", "r1", "memory"
);
}
}
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
void vRequestSystemCallExit( void ) /* __attribute__( ( naked ) ) PRIVILEGED_FUNCTION */
{
__asm volatile ( "svc %0 \n" ::"i" ( portSVC_SYSTEM_CALL_EXIT ) : "memory" );
}
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
void vSystemCallExit( uint32_t * pulSystemCallStack,
uint32_t ulLR ) /* PRIVILEGED_FUNCTION */
{
extern TaskHandle_t pxCurrentTCB;
xMPU_SETTINGS * pxMpuSettings;
uint32_t * pulTaskStack;
uint32_t ulStackFrameSize, ulSystemCallLocation, i;
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __privileged_functions_start__;
extern uint32_t * __privileged_functions_end__;
#else
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __privileged_functions_start__[];
extern uint32_t __privileged_functions_end__[];
#endif /* #if defined( __ARMCC_VERSION ) */
ulSystemCallLocation = pulSystemCallStack[ portOFFSET_TO_PC ];
pxMpuSettings = xTaskGetMPUSettings( pxCurrentTCB );
/* Checks:
* 1. SVC is raised from the privileged code (i.e. application is not
* raising SVC directly). This SVC is only raised from
* vRequestSystemCallExit which is in the privileged code section.
* 2. pxMpuSettings->xSystemCallStackInfo.pulTaskStack must not be NULL -
* this means that we previously entered a system call and the
* application is not attempting to exit without entering a system
* call.
*/
if( ( ulSystemCallLocation >= ( uint32_t ) __privileged_functions_start__ ) &&
( ulSystemCallLocation <= ( uint32_t ) __privileged_functions_end__ ) &&
( pxMpuSettings->xSystemCallStackInfo.pulTaskStack != NULL ) )
{
pulTaskStack = pxMpuSettings->xSystemCallStackInfo.pulTaskStack;
#if ( ( configENABLE_FPU == 1 ) || ( configENABLE_MVE == 1 ) )
{
if( ( ulLR & portEXC_RETURN_STACK_FRAME_TYPE_MASK ) == 0UL )
{
/* Extended frame i.e. FPU in use. */
ulStackFrameSize = 26;
__asm volatile (
" vpush {s0} \n" /* Trigger lazy stacking. */
" vpop {s0} \n" /* Nullify the affect of the above instruction. */
::: "memory"
);
}
else
{
/* Standard frame i.e. FPU not in use. */
ulStackFrameSize = 8;
}
}
#else /* if ( ( configENABLE_FPU == 1 ) || ( configENABLE_MVE == 1 ) ) */
{
ulStackFrameSize = 8;
}
#endif /* configENABLE_FPU || configENABLE_MVE */
/* Make space on the task stack for the stack frame. */
pulTaskStack = pulTaskStack - ulStackFrameSize;
/* Copy the stack frame. */
for( i = 0; i < ulStackFrameSize; i++ )
{
pulTaskStack[ i ] = pulSystemCallStack[ i ];
}
/* Use the pulTaskStack in thread mode. */
__asm volatile ( "msr psp, %0" : : "r" ( pulTaskStack ) );
/* Return to the caller of the System Call entry point (i.e. the
* caller of the MPU_<API>). */
pulTaskStack[ portOFFSET_TO_PC ] = pxMpuSettings->xSystemCallStackInfo.ulLinkRegisterAtSystemCallEntry;
/* Ensure that LR has a valid value.*/
pulTaskStack[ portOFFSET_TO_LR ] = pxMpuSettings->xSystemCallStackInfo.ulLinkRegisterAtSystemCallEntry;
/* Restore the PSPLIM register to what it was at the time of
* system call entry. */
#if ( portUSE_PSPLIM_REGISTER == 1 )
{
__asm volatile ( "msr psplim, %0" : : "r" ( pxMpuSettings->xSystemCallStackInfo.ulStackLimitRegisterAtSystemCallEntry ) );
}
#endif
/* If the hardware used padding to force the stack pointer
* to be double word aligned, set the stacked xPSR bit[9],
* otherwise clear it. */
if( ( pxMpuSettings->ulTaskFlags & portSTACK_FRAME_HAS_PADDING_FLAG ) == portSTACK_FRAME_HAS_PADDING_FLAG )
{
pulTaskStack[ portOFFSET_TO_PSR ] |= portPSR_STACK_PADDING_MASK;
}
else
{
pulTaskStack[ portOFFSET_TO_PSR ] &= ( ~portPSR_STACK_PADDING_MASK );
}
/* This is not NULL only for the duration of the system call. */
pxMpuSettings->xSystemCallStackInfo.pulTaskStack = NULL;
/* Drop the privilege before returning to the thread mode. */
__asm volatile (
" mrs r0, control \n" /* Obtain current control value. */
" movs r1, #1 \n" /* r1 = 1. */
" orrs r0, r1 \n" /* Set nPRIV bit. */
" msr control, r0 \n" /* Write back new control value. */
::: "r0", "r1", "memory"
);
}
}
#endif /* ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/*-----------------------------------------------------------*/
#if ( configENABLE_MPU == 1 )
BaseType_t xPortIsTaskPrivileged( void ) /* PRIVILEGED_FUNCTION */
{
BaseType_t xTaskIsPrivileged = pdFALSE;
const xMPU_SETTINGS * xTaskMpuSettings = xTaskGetMPUSettings( NULL ); /* Calling task's MPU settings. */
if( ( xTaskMpuSettings->ulTaskFlags & portTASK_IS_PRIVILEGED_FLAG ) == portTASK_IS_PRIVILEGED_FLAG )
{
xTaskIsPrivileged = pdTRUE;
}
return xTaskIsPrivileged;
}
#endif /* configENABLE_MPU == 1 */
/*-----------------------------------------------------------*/
#if ( configENABLE_MPU == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged,
xMPU_SETTINGS * xMPUSettings ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulIndex = 0;
xMPUSettings->ulContext[ ulIndex ] = 0x04040404; /* r4. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x05050505; /* r5. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x06060606; /* r6. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x07070707; /* r7. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x08080808; /* r8. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x09090909; /* r9. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x10101010; /* r10. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x11111111; /* r11. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) pvParameters; /* r0. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x01010101; /* r1. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x02020202; /* r2. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x03030303; /* r3. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = 0x12121212; /* r12. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) portTASK_RETURN_ADDRESS; /* LR. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) pxCode; /* PC. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = portINITIAL_XPSR; /* xPSR. */
ulIndex++;
#if ( configENABLE_TRUSTZONE == 1 )
{
xMPUSettings->ulContext[ ulIndex ] = portNO_SECURE_CONTEXT; /* xSecureContext. */
ulIndex++;
}
#endif /* configENABLE_TRUSTZONE */
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) ( pxTopOfStack - 8 ); /* PSP with the hardware saved stack. */
ulIndex++;
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) pxEndOfStack; /* PSPLIM. */
ulIndex++;
if( xRunPrivileged == pdTRUE )
{
xMPUSettings->ulTaskFlags |= portTASK_IS_PRIVILEGED_FLAG;
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) portINITIAL_CONTROL_PRIVILEGED; /* CONTROL. */
ulIndex++;
}
else
{
xMPUSettings->ulTaskFlags &= ( ~portTASK_IS_PRIVILEGED_FLAG );
xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) portINITIAL_CONTROL_UNPRIVILEGED; /* CONTROL. */
ulIndex++;
}
xMPUSettings->ulContext[ ulIndex ] = portINITIAL_EXC_RETURN; /* LR (EXC_RETURN). */
ulIndex++;
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
{
/* Ensure that the system call stack is double word aligned. */
xMPUSettings->xSystemCallStackInfo.pulSystemCallStack = &( xMPUSettings->xSystemCallStackInfo.ulSystemCallStackBuffer[ configSYSTEM_CALL_STACK_SIZE - 1 ] );
xMPUSettings->xSystemCallStackInfo.pulSystemCallStack = ( uint32_t * ) ( ( uint32_t ) ( xMPUSettings->xSystemCallStackInfo.pulSystemCallStack ) &
( uint32_t ) ( ~( portBYTE_ALIGNMENT_MASK ) ) );
xMPUSettings->xSystemCallStackInfo.pulSystemCallStackLimit = &( xMPUSettings->xSystemCallStackInfo.ulSystemCallStackBuffer[ 0 ] );
xMPUSettings->xSystemCallStackInfo.pulSystemCallStackLimit = ( uint32_t * ) ( ( ( uint32_t ) ( xMPUSettings->xSystemCallStackInfo.pulSystemCallStackLimit ) +
( uint32_t ) ( portBYTE_ALIGNMENT - 1 ) ) &
( uint32_t ) ( ~( portBYTE_ALIGNMENT_MASK ) ) );
/* This is not NULL only for the duration of a system call. */
xMPUSettings->xSystemCallStackInfo.pulTaskStack = NULL;
}
#endif /* configUSE_MPU_WRAPPERS_V1 == 0 */
return &( xMPUSettings->ulContext[ ulIndex ] );
}
#else /* configENABLE_MPU */
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) /* PRIVILEGED_FUNCTION */
{
/* Simulate the stack frame as it would be created by a context switch
* interrupt. */
#if ( portPRELOAD_REGISTERS == 0 )
{
pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
*pxTopOfStack = portINITIAL_XPSR; /* xPSR. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode; /* PC. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR. */
pxTopOfStack -= 5; /* R12, R3, R2 and R1. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0. */
pxTopOfStack -= 9; /* R11..R4, EXC_RETURN. */
*pxTopOfStack = portINITIAL_EXC_RETURN;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
#if ( configENABLE_TRUSTZONE == 1 )
{
pxTopOfStack--;
*pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
}
#endif /* configENABLE_TRUSTZONE */
}
#else /* portPRELOAD_REGISTERS */
{
pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
*pxTopOfStack = portINITIAL_XPSR; /* xPSR. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode; /* PC. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212UL; /* R12. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303UL; /* R3. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202UL; /* R2. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101UL; /* R1. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111UL; /* R11. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010UL; /* R10. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909UL; /* R09. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808UL; /* R08. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707UL; /* R07. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606UL; /* R06. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505UL; /* R05. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404UL; /* R04. */
pxTopOfStack--;
*pxTopOfStack = portINITIAL_EXC_RETURN; /* EXC_RETURN. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
#if ( configENABLE_TRUSTZONE == 1 )
{
pxTopOfStack--;
*pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
}
#endif /* configENABLE_TRUSTZONE */
}
#endif /* portPRELOAD_REGISTERS */
return pxTopOfStack;
}
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
{
/* An application can install FreeRTOS interrupt handlers in one of the
* following ways:
* 1. Direct Routing - Install the functions SVC_Handler and PendSV_Handler
* for SVCall and PendSV interrupts respectively.
* 2. Indirect Routing - Install separate handlers for SVCall and PendSV
* interrupts and route program control from those handlers to
* SVC_Handler and PendSV_Handler functions.
*
* Applications that use Indirect Routing must set
* configCHECK_HANDLER_INSTALLATION to 0 in their FreeRTOSConfig.h. Direct
* routing, which is validated here when configCHECK_HANDLER_INSTALLATION
* is 1, should be preferred when possible. */
#if ( configCHECK_HANDLER_INSTALLATION == 1 )
{
const portISR_t * const pxVectorTable = portSCB_VTOR_REG;
/* Validate that the application has correctly installed the FreeRTOS
* handlers for SVCall and PendSV interrupts. We do not check the
* installation of the SysTick handler because the application may
* choose to drive the RTOS tick using a timer other than the SysTick
* timer by overriding the weak function vPortSetupTimerInterrupt().
*
* Assertion failures here indicate incorrect installation of the
* FreeRTOS handlers. For help installing the FreeRTOS handlers, see
* https://www.freertos.org/Why-FreeRTOS/FAQs.
*
* Systems with a configurable address for the interrupt vector table
* can also encounter assertion failures or even system faults here if
* VTOR is not set correctly to point to the application's vector table. */
configASSERT( pxVectorTable[ portVECTOR_INDEX_SVC ] == SVC_Handler );
configASSERT( pxVectorTable[ portVECTOR_INDEX_PENDSV ] == PendSV_Handler );
}
#endif /* configCHECK_HANDLER_INSTALLATION */
#if ( ( configASSERT_DEFINED == 1 ) && ( portHAS_ARMV8M_MAIN_EXTENSION == 1 ) )
{
volatile uint32_t ulImplementedPrioBits = 0;
volatile uint8_t ucMaxPriorityValue;
/* Determine the maximum priority from which ISR safe FreeRTOS API
* functions can be called. ISR safe functions are those that end in
* "FromISR". FreeRTOS maintains separate thread and ISR API functions to
* ensure interrupt entry is as fast and simple as possible.
*
* First, determine the number of priority bits available. Write to all
* possible bits in the priority setting for SVCall. */
portNVIC_SHPR2_REG = 0xFF000000;
/* Read the value back to see how many bits stuck. */
ucMaxPriorityValue = ( uint8_t ) ( ( portNVIC_SHPR2_REG & 0xFF000000 ) >> 24 );
/* Use the same mask on the maximum system call priority. */
ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
/* Check that the maximum system call priority is nonzero after
* accounting for the number of priority bits supported by the
* hardware. A priority of 0 is invalid because setting the BASEPRI
* register to 0 unmasks all interrupts, and interrupts with priority 0
* cannot be masked using BASEPRI.
* See https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */
configASSERT( ucMaxSysCallPriority );
/* Check that the bits not implemented in hardware are zero in
* configMAX_SYSCALL_INTERRUPT_PRIORITY. */
configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY & ( uint8_t ) ( ~( uint32_t ) ucMaxPriorityValue ) ) == 0U );
/* Calculate the maximum acceptable priority group value for the number
* of bits read back. */
while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
{
ulImplementedPrioBits++;
ucMaxPriorityValue <<= ( uint8_t ) 0x01;
}
if( ulImplementedPrioBits == 8 )
{
/* When the hardware implements 8 priority bits, there is no way for
* the software to configure PRIGROUP to not have sub-priorities. As
* a result, the least significant bit is always used for sub-priority
* and there are 128 preemption priorities and 2 sub-priorities.
*
* This may cause some confusion in some cases - for example, if
* configMAX_SYSCALL_INTERRUPT_PRIORITY is set to 5, both 5 and 4
* priority interrupts will be masked in Critical Sections as those
* are at the same preemption priority. This may appear confusing as
* 4 is higher (numerically lower) priority than
* configMAX_SYSCALL_INTERRUPT_PRIORITY and therefore, should not
* have been masked. Instead, if we set configMAX_SYSCALL_INTERRUPT_PRIORITY
* to 4, this confusion does not happen and the behaviour remains the same.
*
* The following assert ensures that the sub-priority bit in the
* configMAX_SYSCALL_INTERRUPT_PRIORITY is clear to avoid the above mentioned
* confusion. */
configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY & 0x1U ) == 0U );
ulMaxPRIGROUPValue = 0;
}
else
{
ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS - ulImplementedPrioBits;
}
/* Shift the priority group value back to its position within the AIRCR
* register. */
ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
}
#endif /* #if ( ( configASSERT_DEFINED == 1 ) && ( portHAS_ARMV8M_MAIN_EXTENSION == 1 ) ) */
/* Make PendSV and SysTick the lowest priority interrupts, and make SVCall
* the highest priority. */
portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
portNVIC_SHPR2_REG = 0;
#if ( configENABLE_MPU == 1 )
{
/* Setup the Memory Protection Unit (MPU). */
prvSetupMPU();
}
#endif /* configENABLE_MPU */
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
vPortSetupTimerInterrupt();
/* Initialize the critical nesting count ready for the first task. */
ulCriticalNesting = 0;
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
{
xSchedulerRunning = pdTRUE;
}
#endif /* ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) ) */
/* Start the first task. */
vStartFirstTask();
/* Should never get here as the tasks will now be executing. Call the task
* exit error function to prevent compiler warnings about a static function
* not being called in the case that the application writer overrides this
* functionality by defining configTASK_RETURN_ADDRESS. Call
* vTaskSwitchContext() so link time optimization does not remove the
* symbol. */
vTaskSwitchContext();
prvTaskExitError();
/* Should not get here. */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
{
/* Not implemented in ports where there is nothing to return to.
* Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
}
/*-----------------------------------------------------------*/
#if ( configENABLE_MPU == 1 )
void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
const struct xMEMORY_REGION * const xRegions,
StackType_t * pxBottomOfStack,
configSTACK_DEPTH_TYPE uxStackDepth )
{
uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
int32_t lIndex = 0;
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __privileged_sram_start__;
extern uint32_t * __privileged_sram_end__;
#else
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __privileged_sram_start__[];
extern uint32_t __privileged_sram_end__[];
#endif /* defined( __ARMCC_VERSION ) */
/* Setup MAIR0. */
xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
/* This function is called automatically when the task is created - in
* which case the stack region parameters will be valid. At all other
* times the stack parameters will not be valid and it is assumed that
* the stack region has already been configured. */
if( uxStackDepth > 0 )
{
ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( uxStackDepth * ( configSTACK_DEPTH_TYPE ) sizeof( StackType_t ) ) - 1;
/* If the stack is within the privileged SRAM, do not protect it
* using a separate MPU region. This is needed because privileged
* SRAM is already protected using an MPU region and ARMv8-M does
* not allow overlapping MPU regions. */
if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
{
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
}
else
{
/* Define the region that allows access to the stack. */
ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_READ_WRITE ) |
( portMPU_REGION_EXECUTE_NEVER );
xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
}
}
/* User supplied configurable regions. */
for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
{
/* If xRegions is NULL i.e. the task has not specified any MPU
* region, the else part ensures that all the configurable MPU
* regions are invalidated. */
if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
{
/* Translate the generic region definition contained in xRegions
* into the ARMv8 specific MPU settings that are then stored in
* xMPUSettings. */
ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
/* Start address. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
( portMPU_REGION_NON_SHAREABLE );
/* RO/RW. */
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
}
else
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
}
/* XN. */
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
}
/* End Address. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
( portMPU_RLAR_REGION_ENABLE );
/* PXN. */
#if ( portARMV8M_MINOR_VERSION >= 1 )
{
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_PRIVILEGED_EXECUTE_NEVER ) != 0 )
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= ( portMPU_RLAR_PRIVILEGED_EXECUTE_NEVER );
}
}
#endif /* portARMV8M_MINOR_VERSION >= 1 */
/* Normal memory/ Device memory. */
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
{
/* Attr1 in MAIR0 is configured as device memory. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
}
else
{
/* Attr0 in MAIR0 is configured as normal memory. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
}
}
else
{
/* Invalidate the region. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
}
lIndex++;
}
}
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
BaseType_t xPortIsAuthorizedToAccessBuffer( const void * pvBuffer,
uint32_t ulBufferLength,
uint32_t ulAccessRequested ) /* PRIVILEGED_FUNCTION */
{
uint32_t i, ulBufferStartAddress, ulBufferEndAddress;
BaseType_t xAccessGranted = pdFALSE;
const xMPU_SETTINGS * xTaskMpuSettings = xTaskGetMPUSettings( NULL ); /* Calling task's MPU settings. */
if( xSchedulerRunning == pdFALSE )
{
/* Grant access to all the kernel objects before the scheduler
* is started. It is necessary because there is no task running
* yet and therefore, we cannot use the permissions of any
* task. */
xAccessGranted = pdTRUE;
}
else if( ( xTaskMpuSettings->ulTaskFlags & portTASK_IS_PRIVILEGED_FLAG ) == portTASK_IS_PRIVILEGED_FLAG )
{
xAccessGranted = pdTRUE;
}
else
{
if( portADD_UINT32_WILL_OVERFLOW( ( ( uint32_t ) pvBuffer ), ( ulBufferLength - 1UL ) ) == pdFALSE )
{
ulBufferStartAddress = ( uint32_t ) pvBuffer;
ulBufferEndAddress = ( ( ( uint32_t ) pvBuffer ) + ulBufferLength - 1UL );
for( i = 0; i < portTOTAL_NUM_REGIONS; i++ )
{
/* Is the MPU region enabled? */
if( ( xTaskMpuSettings->xRegionsSettings[ i ].ulRLAR & portMPU_RLAR_REGION_ENABLE ) == portMPU_RLAR_REGION_ENABLE )
{
if( portIS_ADDRESS_WITHIN_RANGE( ulBufferStartAddress,
portEXTRACT_FIRST_ADDRESS_FROM_RBAR( xTaskMpuSettings->xRegionsSettings[ i ].ulRBAR ),
portEXTRACT_LAST_ADDRESS_FROM_RLAR( xTaskMpuSettings->xRegionsSettings[ i ].ulRLAR ) ) &&
portIS_ADDRESS_WITHIN_RANGE( ulBufferEndAddress,
portEXTRACT_FIRST_ADDRESS_FROM_RBAR( xTaskMpuSettings->xRegionsSettings[ i ].ulRBAR ),
portEXTRACT_LAST_ADDRESS_FROM_RLAR( xTaskMpuSettings->xRegionsSettings[ i ].ulRLAR ) ) &&
portIS_AUTHORIZED( ulAccessRequested,
prvGetRegionAccessPermissions( xTaskMpuSettings->xRegionsSettings[ i ].ulRBAR ) ) )
{
xAccessGranted = pdTRUE;
break;
}
}
}
}
}
return xAccessGranted;
}
#endif /* #if ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/*-----------------------------------------------------------*/
BaseType_t xPortIsInsideInterrupt( void )
{
uint32_t ulCurrentInterrupt;
BaseType_t xReturn;
/* Obtain the number of the currently executing interrupt. Interrupt Program
* Status Register (IPSR) holds the exception number of the currently-executing
* exception or zero for Thread mode.*/
__asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
if( ulCurrentInterrupt == 0 )
{
xReturn = pdFALSE;
}
else
{
xReturn = pdTRUE;
}
return xReturn;
}
/*-----------------------------------------------------------*/
#if ( ( configASSERT_DEFINED == 1 ) && ( portHAS_ARMV8M_MAIN_EXTENSION == 1 ) )
void vPortValidateInterruptPriority( void )
{
uint32_t ulCurrentInterrupt;
uint8_t ucCurrentPriority;
/* Obtain the number of the currently executing interrupt. */
__asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
/* Is the interrupt number a user defined interrupt? */
if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER )
{
/* Look up the interrupt's priority. */
ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ];
/* The following assertion will fail if a service routine (ISR) for
* an interrupt that has been assigned a priority above
* configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
* function. ISR safe FreeRTOS API functions must *only* be called
* from interrupts that have been assigned a priority at or below
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* Numerically low interrupt priority numbers represent logically high
* interrupt priorities, therefore the priority of the interrupt must
* be set to a value equal to or numerically *higher* than
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* Interrupts that use the FreeRTOS API must not be left at their
* default priority of zero as that is the highest possible priority,
* which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
* and therefore also guaranteed to be invalid.
*
* FreeRTOS maintains separate thread and ISR API functions to ensure
* interrupt entry is as fast and simple as possible.
*
* The following links provide detailed information:
* https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html
* https://www.freertos.org/Why-FreeRTOS/FAQs */
configASSERT( ucCurrentPriority >= ucMaxSysCallPriority );
}
/* Priority grouping: The interrupt controller (NVIC) allows the bits
* that define each interrupt's priority to be split between bits that
* define the interrupt's pre-emption priority bits and bits that define
* the interrupt's sub-priority. For simplicity all bits must be defined
* to be pre-emption priority bits. The following assertion will fail if
* this is not the case (if some bits represent a sub-priority).
*
* If the application only uses CMSIS libraries for interrupt
* configuration then the correct setting can be achieved on all Cortex-M
* devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the
* scheduler. Note however that some vendor specific peripheral libraries
* assume a non-zero priority group setting, in which cases using a value
* of zero will result in unpredictable behaviour. */
configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
}
#endif /* #if ( ( configASSERT_DEFINED == 1 ) && ( portHAS_ARMV8M_MAIN_EXTENSION == 1 ) ) */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) && ( configENABLE_ACCESS_CONTROL_LIST == 1 ) )
void vPortGrantAccessToKernelObject( TaskHandle_t xInternalTaskHandle,
int32_t lInternalIndexOfKernelObject ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulAccessControlListEntryIndex, ulAccessControlListEntryBit;
xMPU_SETTINGS * xTaskMpuSettings;
ulAccessControlListEntryIndex = ( ( uint32_t ) lInternalIndexOfKernelObject / portACL_ENTRY_SIZE_BITS );
ulAccessControlListEntryBit = ( ( uint32_t ) lInternalIndexOfKernelObject % portACL_ENTRY_SIZE_BITS );
xTaskMpuSettings = xTaskGetMPUSettings( xInternalTaskHandle );
xTaskMpuSettings->ulAccessControlList[ ulAccessControlListEntryIndex ] |= ( 1U << ulAccessControlListEntryBit );
}
#endif /* #if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) && ( configENABLE_ACCESS_CONTROL_LIST == 1 ) ) */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) && ( configENABLE_ACCESS_CONTROL_LIST == 1 ) )
void vPortRevokeAccessToKernelObject( TaskHandle_t xInternalTaskHandle,
int32_t lInternalIndexOfKernelObject ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulAccessControlListEntryIndex, ulAccessControlListEntryBit;
xMPU_SETTINGS * xTaskMpuSettings;
ulAccessControlListEntryIndex = ( ( uint32_t ) lInternalIndexOfKernelObject / portACL_ENTRY_SIZE_BITS );
ulAccessControlListEntryBit = ( ( uint32_t ) lInternalIndexOfKernelObject % portACL_ENTRY_SIZE_BITS );
xTaskMpuSettings = xTaskGetMPUSettings( xInternalTaskHandle );
xTaskMpuSettings->ulAccessControlList[ ulAccessControlListEntryIndex ] &= ~( 1U << ulAccessControlListEntryBit );
}
#endif /* #if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) && ( configENABLE_ACCESS_CONTROL_LIST == 1 ) ) */
/*-----------------------------------------------------------*/
#if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
#if ( configENABLE_ACCESS_CONTROL_LIST == 1 )
BaseType_t xPortIsAuthorizedToAccessKernelObject( int32_t lInternalIndexOfKernelObject ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulAccessControlListEntryIndex, ulAccessControlListEntryBit;
BaseType_t xAccessGranted = pdFALSE;
const xMPU_SETTINGS * xTaskMpuSettings;
if( xSchedulerRunning == pdFALSE )
{
/* Grant access to all the kernel objects before the scheduler
* is started. It is necessary because there is no task running
* yet and therefore, we cannot use the permissions of any
* task. */
xAccessGranted = pdTRUE;
}
else
{
xTaskMpuSettings = xTaskGetMPUSettings( NULL ); /* Calling task's MPU settings. */
ulAccessControlListEntryIndex = ( ( uint32_t ) lInternalIndexOfKernelObject / portACL_ENTRY_SIZE_BITS );
ulAccessControlListEntryBit = ( ( uint32_t ) lInternalIndexOfKernelObject % portACL_ENTRY_SIZE_BITS );
if( ( xTaskMpuSettings->ulTaskFlags & portTASK_IS_PRIVILEGED_FLAG ) == portTASK_IS_PRIVILEGED_FLAG )
{
xAccessGranted = pdTRUE;
}
else
{
if( ( xTaskMpuSettings->ulAccessControlList[ ulAccessControlListEntryIndex ] & ( 1U << ulAccessControlListEntryBit ) ) != 0 )
{
xAccessGranted = pdTRUE;
}
}
}
return xAccessGranted;
}
#else /* #if ( configENABLE_ACCESS_CONTROL_LIST == 1 ) */
BaseType_t xPortIsAuthorizedToAccessKernelObject( int32_t lInternalIndexOfKernelObject ) /* PRIVILEGED_FUNCTION */
{
( void ) lInternalIndexOfKernelObject;
/* If Access Control List feature is not used, all the tasks have
* access to all the kernel objects. */
return pdTRUE;
}
#endif /* #if ( configENABLE_ACCESS_CONTROL_LIST == 1 ) */
#endif /* #if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) ) */
/*-----------------------------------------------------------*/