| /* |
| * FreeRTOS Kernel <DEVELOPMENT BRANCH> |
| * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved. |
| * |
| * SPDX-License-Identifier: MIT |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy of |
| * this software and associated documentation files (the "Software"), to deal in |
| * the Software without restriction, including without limitation the rights to |
| * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of |
| * the Software, and to permit persons to whom the Software is furnished to do so, |
| * subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in all |
| * copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS |
| * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR |
| * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER |
| * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * https://www.FreeRTOS.org |
| * https://github.com/FreeRTOS |
| * |
| */ |
| |
| |
| #ifndef PORTMACRO_H |
| #define PORTMACRO_H |
| |
| /* *INDENT-OFF* */ |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| /* *INDENT-ON* */ |
| |
| /*----------------------------------------------------------- |
| * Port specific definitions. |
| * |
| * The settings in this file configure FreeRTOS correctly for the |
| * given hardware and compiler. |
| * |
| * These settings should not be altered. |
| *----------------------------------------------------------- |
| */ |
| |
| /* IAR includes. */ |
| #include <intrinsics.h> |
| |
| /* Type definitions. */ |
| #define portCHAR char |
| #define portFLOAT float |
| #define portDOUBLE double |
| #define portLONG long |
| #define portSHORT short |
| #define portSTACK_TYPE uint32_t |
| #define portBASE_TYPE long |
| |
| typedef portSTACK_TYPE StackType_t; |
| typedef long BaseType_t; |
| typedef unsigned long UBaseType_t; |
| |
| #if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS ) |
| typedef uint16_t TickType_t; |
| #define portMAX_DELAY ( TickType_t ) 0xffff |
| #elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS ) |
| typedef uint32_t TickType_t; |
| #define portMAX_DELAY ( TickType_t ) 0xffffffffUL |
| |
| /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do |
| * not need to be guarded with a critical section. */ |
| #define portTICK_TYPE_IS_ATOMIC 1 |
| #else |
| #error "configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width." |
| #endif |
| |
| /* Errata 837070 workaround must be enabled on Cortex-M7 r0p0 |
| * and r0p1 cores. */ |
| #ifndef configENABLE_ERRATA_837070_WORKAROUND |
| #define configENABLE_ERRATA_837070_WORKAROUND 0 |
| #endif |
| /*-----------------------------------------------------------*/ |
| |
| /* MPU specific constants. */ |
| #define portUSING_MPU_WRAPPERS 1 |
| #define portPRIVILEGE_BIT ( 0x80000000UL ) |
| |
| #define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL ) |
| #define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL ) |
| #define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL ) |
| #define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL ) |
| #define portMPU_REGION_PRIVILEGED_READ_WRITE_UNPRIV_READ_ONLY ( 0x02UL << 24UL ) |
| #define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL ) |
| #define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL ) |
| |
| /* Location of the TEX,S,C,B bits in the MPU Region Attribute and Size |
| * Register (RASR). */ |
| #define portMPU_RASR_TEX_S_C_B_LOCATION ( 16UL ) |
| #define portMPU_RASR_TEX_S_C_B_MASK ( 0x3FUL ) |
| |
| /* MPU settings that can be overriden in FreeRTOSConfig.h. */ |
| #ifndef configTOTAL_MPU_REGIONS |
| /* Define to 8 for backward compatibility. */ |
| #define configTOTAL_MPU_REGIONS ( 8UL ) |
| #endif |
| |
| /* |
| * The TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits define the |
| * memory type, and where necessary the cacheable and shareable properties |
| * of the memory region. |
| * |
| * The TEX, C, and B bits together indicate the memory type of the region, |
| * and: |
| * - For Normal memory, the cacheable properties of the region. |
| * - For Device memory, whether the region is shareable. |
| * |
| * For Normal memory regions, the S bit indicates whether the region is |
| * shareable. For Strongly-ordered and Device memory, the S bit is ignored. |
| * |
| * See the following two tables for setting TEX, S, C and B bits for |
| * unprivileged flash, privileged flash and privileged RAM regions. |
| * |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | TEX | C | B | Memory type | Description or Normal region cacheability | Shareable? | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 000 | 0 | 0 | Strongly-ordered | Strongly ordered | Shareable | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 000 | 0 | 1 | Device | Shared device | Shareable | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 000 | 1 | 0 | Normal | Outer and inner write-through; no write allocate | S bit | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 000 | 1 | 1 | Normal | Outer and inner write-back; no write allocate | S bit | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 001 | 0 | 0 | Normal | Outer and inner Non-cacheable | S bit | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 001 | 0 | 1 | Reserved | Reserved | Reserved | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 001 | 1 | 0 | IMPLEMENTATION DEFINED | IMPLEMENTATION DEFINED | IMPLEMENTATION DEFINED | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 001 | 1 | 1 | Normal | Outer and inner write-back; write and read allocate | S bit | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 010 | 0 | 0 | Device | Non-shared device | Not shareable | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 010 | 0 | 1 | Reserved | Reserved | Reserved | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 010 | 1 | X | Reserved | Reserved | Reserved | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 011 | X | X | Reserved | Reserved | Reserved | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | 1BB | A | A | Normal | Cached memory, with AA and BB indicating the inner and | Reserved | |
| | | | | | outer cacheability rules that must be exported on the | | |
| | | | | | bus. See the table below for the cacheability policy | | |
| | | | | | encoding. memory, BB=Outer policy, AA=Inner policy. | | |
| +-----+---+---+------------------------+--------------------------------------------------------+-------------------------+ |
| | |
| +-----------------------------------------+----------------------------------------+ |
| | AA or BB subfield of {TEX,C,B} encoding | Cacheability policy | |
| +-----------------------------------------+----------------------------------------+ |
| | 00 | Non-cacheable | |
| +-----------------------------------------+----------------------------------------+ |
| | 01 | Write-back, write and read allocate | |
| +-----------------------------------------+----------------------------------------+ |
| | 10 | Write-through, no write allocate | |
| +-----------------------------------------+----------------------------------------+ |
| | 11 | Write-back, no write allocate | |
| +-----------------------------------------+----------------------------------------+ |
| */ |
| |
| /* TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits for flash |
| * region. */ |
| #ifndef configTEX_S_C_B_FLASH |
| /* Default to TEX=000, S=1, C=1, B=1 for backward compatibility. */ |
| #define configTEX_S_C_B_FLASH ( 0x07UL ) |
| #endif |
| |
| /* TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits for RAM |
| * region. */ |
| #ifndef configTEX_S_C_B_SRAM |
| /* Default to TEX=000, S=1, C=1, B=1 for backward compatibility. */ |
| #define configTEX_S_C_B_SRAM ( 0x07UL ) |
| #endif |
| |
| #define portSTACK_REGION ( configTOTAL_MPU_REGIONS - 5UL ) |
| #define portGENERAL_PERIPHERALS_REGION ( configTOTAL_MPU_REGIONS - 4UL ) |
| #define portUNPRIVILEGED_FLASH_REGION ( configTOTAL_MPU_REGIONS - 3UL ) |
| #define portPRIVILEGED_FLASH_REGION ( configTOTAL_MPU_REGIONS - 2UL ) |
| #define portPRIVILEGED_RAM_REGION ( configTOTAL_MPU_REGIONS - 1UL ) |
| #define portFIRST_CONFIGURABLE_REGION ( 0UL ) |
| #define portLAST_CONFIGURABLE_REGION ( configTOTAL_MPU_REGIONS - 6UL ) |
| #define portNUM_CONFIGURABLE_REGIONS ( configTOTAL_MPU_REGIONS - 5UL ) |
| #define portTOTAL_NUM_REGIONS_IN_TCB ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus 1 to create space for the stack region. */ |
| |
| typedef struct MPU_REGION_REGISTERS |
| { |
| uint32_t ulRegionBaseAddress; |
| uint32_t ulRegionAttribute; |
| } xMPU_REGION_REGISTERS; |
| |
| typedef struct MPU_REGION_SETTINGS |
| { |
| uint32_t ulRegionStartAddress; |
| uint32_t ulRegionEndAddress; |
| uint32_t ulRegionPermissions; |
| } xMPU_REGION_SETTINGS; |
| |
| #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) |
| |
| #ifndef configSYSTEM_CALL_STACK_SIZE |
| #error "configSYSTEM_CALL_STACK_SIZE must be defined to the desired size of the system call stack in words for using MPU wrappers v2." |
| #endif |
| |
| typedef struct SYSTEM_CALL_STACK_INFO |
| { |
| uint32_t ulSystemCallStackBuffer[ configSYSTEM_CALL_STACK_SIZE ]; |
| uint32_t * pulSystemCallStack; |
| uint32_t * pulTaskStack; |
| uint32_t ulLinkRegisterAtSystemCallEntry; |
| } xSYSTEM_CALL_STACK_INFO; |
| |
| #endif /* configUSE_MPU_WRAPPERS_V1 == 0 */ |
| |
| #define MAX_CONTEXT_SIZE ( 52 ) |
| |
| /* Size of an Access Control List (ACL) entry in bits. */ |
| #define portACL_ENTRY_SIZE_BITS ( 32U ) |
| |
| /* Flags used for xMPU_SETTINGS.ulTaskFlags member. */ |
| #define portSTACK_FRAME_HAS_PADDING_FLAG ( 1UL << 0UL ) |
| #define portTASK_IS_PRIVILEGED_FLAG ( 1UL << 1UL ) |
| |
| typedef struct MPU_SETTINGS |
| { |
| xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS_IN_TCB ]; |
| xMPU_REGION_SETTINGS xRegionSettings[ portTOTAL_NUM_REGIONS_IN_TCB ]; |
| uint32_t ulContext[ MAX_CONTEXT_SIZE ]; |
| uint32_t ulTaskFlags; |
| |
| #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) |
| xSYSTEM_CALL_STACK_INFO xSystemCallStackInfo; |
| #if ( configENABLE_ACCESS_CONTROL_LIST == 1 ) |
| uint32_t ulAccessControlList[ ( configPROTECTED_KERNEL_OBJECT_POOL_SIZE / portACL_ENTRY_SIZE_BITS ) + 1 ]; |
| #endif |
| #endif |
| } xMPU_SETTINGS; |
| |
| /* Architecture specifics. */ |
| #define portSTACK_GROWTH ( -1 ) |
| #define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) |
| #define portBYTE_ALIGNMENT 8 |
| /*-----------------------------------------------------------*/ |
| |
| /* SVC numbers for various services. */ |
| #define portSVC_START_SCHEDULER 100 |
| #define portSVC_YIELD 101 |
| #define portSVC_RAISE_PRIVILEGE 102 |
| #define portSVC_SYSTEM_CALL_EXIT 103 |
| |
| /* Scheduler utilities. */ |
| |
| #define portYIELD() __asm volatile ( " SVC %0 \n" ::"i" ( portSVC_YIELD ) : "memory" ) |
| #define portYIELD_WITHIN_API() \ |
| { \ |
| /* Set a PendSV to request a context switch. */ \ |
| portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ |
| __DSB(); \ |
| __ISB(); \ |
| } |
| |
| #define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) ) |
| #define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) |
| #define portEND_SWITCHING_ISR( xSwitchRequired ) \ |
| do \ |
| { \ |
| if( xSwitchRequired != pdFALSE ) \ |
| { \ |
| traceISR_EXIT_TO_SCHEDULER(); \ |
| portYIELD_WITHIN_API(); \ |
| } \ |
| else \ |
| { \ |
| traceISR_EXIT(); \ |
| } \ |
| } while( 0 ) |
| #define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) |
| /*-----------------------------------------------------------*/ |
| |
| /* Architecture specific optimisations. */ |
| #ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION |
| #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 |
| #endif |
| |
| #if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 ) |
| |
| /* Check the configuration. */ |
| #if ( configMAX_PRIORITIES > 32 ) |
| #error "configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice." |
| #endif |
| |
| /* Store/clear the ready priorities in a bit map. */ |
| #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) |
| #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) |
| |
| /*-----------------------------------------------------------*/ |
| |
| #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( ( uint32_t ) __CLZ( ( uxReadyPriorities ) ) ) ) |
| |
| #endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ |
| /*-----------------------------------------------------------*/ |
| |
| /* Critical section management. */ |
| extern void vPortEnterCritical( void ); |
| extern void vPortExitCritical( void ); |
| |
| #if ( configENABLE_ERRATA_837070_WORKAROUND == 1 ) |
| #define portDISABLE_INTERRUPTS() \ |
| { \ |
| __disable_interrupt(); \ |
| __set_BASEPRI( configMAX_SYSCALL_INTERRUPT_PRIORITY ); \ |
| __DSB(); \ |
| __ISB(); \ |
| __enable_interrupt(); \ |
| } |
| #else |
| #define portDISABLE_INTERRUPTS() \ |
| { \ |
| __set_BASEPRI( configMAX_SYSCALL_INTERRUPT_PRIORITY ); \ |
| __DSB(); \ |
| __ISB(); \ |
| } |
| #endif /* if ( configENABLE_ERRATA_837070_WORKAROUND == 1 ) */ |
| |
| #define portENABLE_INTERRUPTS() __set_BASEPRI( 0 ) |
| #define portENTER_CRITICAL() vPortEnterCritical() |
| #define portEXIT_CRITICAL() vPortExitCritical() |
| #define portSET_INTERRUPT_MASK_FROM_ISR() __get_BASEPRI(); portDISABLE_INTERRUPTS() |
| #define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) __set_BASEPRI( x ) |
| /*-----------------------------------------------------------*/ |
| |
| /* Task function macros as described on the FreeRTOS.org WEB site. These are |
| * not necessary for to use this port. They are defined so the common demo files |
| * (which build with all the ports) will build. */ |
| #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters ) |
| #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters ) |
| /*-----------------------------------------------------------*/ |
| |
| #ifdef configASSERT |
| void vPortValidateInterruptPriority( void ); |
| #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() |
| #endif |
| |
| /* portNOP() is not required by this port. */ |
| #define portNOP() |
| |
| #define portINLINE __inline |
| |
| #ifndef portFORCE_INLINE |
| #define portFORCE_INLINE inline __attribute__( ( always_inline ) ) |
| #endif |
| |
| /*-----------------------------------------------------------*/ |
| |
| portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) |
| { |
| uint32_t ulCurrentInterrupt; |
| BaseType_t xReturn; |
| |
| /* Obtain the number of the currently executing interrupt. */ |
| __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" ); |
| |
| if( ulCurrentInterrupt == 0 ) |
| { |
| xReturn = pdFALSE; |
| } |
| else |
| { |
| xReturn = pdTRUE; |
| } |
| |
| return xReturn; |
| } |
| |
| |
| /*-----------------------------------------------------------*/ |
| |
| extern BaseType_t xIsPrivileged( void ); |
| extern void vResetPrivilege( void ); |
| extern void vPortSwitchToUserMode( void ); |
| |
| /** |
| * @brief Checks whether or not the processor is privileged. |
| * |
| * @return 1 if the processor is already privileged, 0 otherwise. |
| */ |
| #define portIS_PRIVILEGED() xIsPrivileged() |
| |
| /** |
| * @brief Raise an SVC request to raise privilege. |
| */ |
| #define portRAISE_PRIVILEGE() __asm volatile ( "svc %0 \n" ::"i" ( portSVC_RAISE_PRIVILEGE ) : "memory" ); |
| |
| /** |
| * @brief Lowers the privilege level by setting the bit 0 of the CONTROL |
| * register. |
| */ |
| #define portRESET_PRIVILEGE() vResetPrivilege() |
| |
| /** |
| * @brief Make a task unprivileged. |
| * |
| * It must be called from privileged tasks only. Calling it from unprivileged |
| * task will result in a memory protection fault. |
| */ |
| #define portSWITCH_TO_USER_MODE() vPortSwitchToUserMode() |
| /*-----------------------------------------------------------*/ |
| |
| extern BaseType_t xPortIsTaskPrivileged( void ); |
| |
| /** |
| * @brief Checks whether or not the calling task is privileged. |
| * |
| * @return pdTRUE if the calling task is privileged, pdFALSE otherwise. |
| */ |
| #define portIS_TASK_PRIVILEGED() xPortIsTaskPrivileged() |
| /*-----------------------------------------------------------*/ |
| |
| #ifndef configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY |
| #warning "configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY is not defined. We recommend defining it to 1 in FreeRTOSConfig.h for better security. www.FreeRTOS.org/FreeRTOS-V10.3.x.html" |
| #define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 0 |
| #endif |
| /*-----------------------------------------------------------*/ |
| |
| /* Suppress warnings that are generated by the IAR tools, but cannot be fixed in |
| * the source code because to do so would cause other compilers to generate |
| * warnings. */ |
| #pragma diag_suppress=Pe191 |
| #pragma diag_suppress=Pa082 |
| #pragma diag_suppress=Be006 |
| /*-----------------------------------------------------------*/ |
| |
| /* *INDENT-OFF* */ |
| #ifdef __cplusplus |
| } |
| #endif |
| /* *INDENT-ON* */ |
| |
| #endif /* PORTMACRO_H */ |
