portable/GCC/TriCore_1782/portmacro.h - third_party/github/FreeRTOS/FreeRTOS-Kernel - Git at Google

 /*
  * FreeRTOS Kernel V10.3.1
  * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy of
  * this software and associated documentation files (the "Software"), to deal in
  * the Software without restriction, including without limitation the rights to
  * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
  * the Software, and to permit persons to whom the Software is furnished to do so,
  * subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in all
  * copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
  * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
  * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
  * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
  * 1 tab == 4 spaces!
  */

 #ifndef PORTMACRO_H
 #define PORTMACRO_H

 #ifdef __cplusplus
 extern "C" {
 #endif

 /* System Includes. */
 #include <tc1782.h>
 #include <machine/intrinsics.h>

 /*-----------------------------------------------------------
  * Port specific definitions.
  *
  * The settings in this file configure FreeRTOS correctly for the
  * given hardware and compiler.
  *
  * These settings should not be altered.
  *-----------------------------------------------------------
  */

 /* Type definitions. */
 #define portCHAR		char
 #define portFLOAT		float
 #define portDOUBLE		double
 #define portLONG		long
 #define portSHORT		short
 #define portSTACK_TYPE	uint32_t
 #define portBASE_TYPE	long

 typedef portSTACK_TYPE StackType_t;
 typedef long BaseType_t;
 typedef unsigned long UBaseType_t;

 #if( configUSE_16_BIT_TICKS == 1 )
 	typedef uint16_t TickType_t;
 	#define portMAX_DELAY ( TickType_t ) 0xffff
 #else
 	typedef uint32_t TickType_t;
 	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL

 	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
 	not need to be guarded with a critical section. */
 	#define portTICK_TYPE_IS_ATOMIC 1
 #endif
 /*---------------------------------------------------------------------------*/

 /* Architecture specifics. */
 #define portSTACK_GROWTH							( -1 )
 #define portTICK_PERIOD_MS							( ( TickType_t ) 1000 / configTICK_RATE_HZ )
 #define portBYTE_ALIGNMENT							4
 #define portNOP()									__asm volatile( " nop " )
 #define portCRITICAL_NESTING_IN_TCB					1
 #define portRESTORE_FIRST_TASK_PRIORITY_LEVEL		1


 /*---------------------------------------------------------------------------*/

 typedef struct MPU_SETTINGS { uint32_t ulNotUsed; } xMPU_SETTINGS;

 /* Define away the instruction from the Restore Context Macro. */
 #define portPRIVILEGE_BIT							0x0UL

 #define portCCPN_MASK						( 0x000000FFUL )

 extern void vTaskEnterCritical( void );
 extern void vTaskExitCritical( void );
 #define portENTER_CRITICAL()			vTaskEnterCritical()
 #define portEXIT_CRITICAL()				vTaskExitCritical()
 /*---------------------------------------------------------------------------*/

 /* CSA Manipulation. */
 #define portCSA_TO_ADDRESS( pCSA )			( ( uint32_t * )( ( ( ( pCSA ) & 0x000F0000 ) << 12 ) | ( ( ( pCSA ) & 0x0000FFFF ) << 6 ) ) )
 #define portADDRESS_TO_CSA( pAddress )		( ( uint32_t )( ( ( ( (uint32_t)( pAddress ) ) & 0xF0000000 ) >> 12 ) | ( ( ( uint32_t )( pAddress ) & 0x003FFFC0 ) >> 6 ) ) )
 /*---------------------------------------------------------------------------*/

 #define portYIELD()								_syscall( 0 )
 /* Port Restore is implicit in the platform when the function is returned from the original PSW is automatically replaced. */
 #define portSYSCALL_TASK_YIELD					0
 #define portSYSCALL_RAISE_PRIORITY				1
 /*---------------------------------------------------------------------------*/

 /* Critical section management. */

 /* Set ICR.CCPN to configMAX_SYSCALL_INTERRUPT_PRIORITY. */
 #define portDISABLE_INTERRUPTS()	{																									\
 										uint32_t ulICR;																			\
 										_disable();																						\
 										ulICR = __MFCR( $ICR ); 		/* Get current ICR value. */										\
 										ulICR &= ~portCCPN_MASK;	/* Clear down mask bits. */											\
 										ulICR |= configMAX_SYSCALL_INTERRUPT_PRIORITY; /* Set mask bits to required priority mask. */	\
 										_mtcr( $ICR, ulICR );		/* Write back updated ICR. */										\
 										_isync();																						\
 										_enable();																						\
 									}

 /* Clear ICR.CCPN to allow all interrupt priorities. */
 #define portENABLE_INTERRUPTS()		{																	\
 										uint32_t ulICR;											\
 										_disable();														\
 										ulICR = __MFCR( $ICR );		/* Get current ICR value. */		\
 										ulICR &= ~portCCPN_MASK;	/* Clear down mask bits. */			\
 										_mtcr( $ICR, ulICR );		/* Write back updated ICR. */		\
 										_isync();														\
 										_enable();														\
 									}

 /* Set ICR.CCPN to uxSavedMaskValue. */
 #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedMaskValue ) 	{																						\
 																	uint32_t ulICR;																\
 																	_disable();																			\
 																	ulICR = __MFCR( $ICR );		/* Get current ICR value. */							\
 																	ulICR &= ~portCCPN_MASK;	/* Clear down mask bits. */								\
 																	ulICR |= uxSavedMaskValue;	/* Set mask bits to previously saved mask value. */		\
 																	_mtcr( $ICR, ulICR );		/* Write back updated ICR. */							\
 																	_isync();																			\
 																	_enable();																			\
 																}


 /* Set ICR.CCPN to configMAX_SYSCALL_INTERRUPT_PRIORITY */
 extern uint32_t uxPortSetInterruptMaskFromISR( void );
 #define portSET_INTERRUPT_MASK_FROM_ISR() 	uxPortSetInterruptMaskFromISR()

 /* Pend a priority 1 interrupt, which will take care of the context switch. */
 #define portYIELD_FROM_ISR( xHigherPriorityTaskWoken ) 		if( xHigherPriorityTaskWoken != pdFALSE ) {	CPU_SRC0.bits.SETR = 1; _isync(); }

 /*---------------------------------------------------------------------------*/

 /* Task function macros as described on the FreeRTOS.org WEB site. */
 #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
 #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
 /*---------------------------------------------------------------------------*/

 /*
  * Port specific clean up macro required to free the CSAs that were consumed by
  * a task that has since been deleted.
  */
 void vPortReclaimCSA( uint32_t *pxTCB );
 #define portCLEAN_UP_TCB( pxTCB )		vPortReclaimCSA( ( uint32_t * ) ( pxTCB ) )

 #ifdef __cplusplus
 }
 #endif

 #endif /* PORTMACRO_H */
	/*
	* FreeRTOS Kernel V10.3.1
	* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
	*
	* Permission is hereby granted, free of charge, to any person obtaining a copy of
	* this software and associated documentation files (the "Software"), to deal in
	* the Software without restriction, including without limitation the rights to
	* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
	* the Software, and to permit persons to whom the Software is furnished to do so,
	* subject to the following conditions:
	*
	* The above copyright notice and this permission notice shall be included in all
	* copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
	* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
	* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
	* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
	*
	* http://www.FreeRTOS.org
	* http://aws.amazon.com/freertos
	*
	* 1 tab == 4 spaces!
	*/

	#ifndef PORTMACRO_H
	#define PORTMACRO_H

	#ifdef __cplusplus
	extern "C" {
	#endif

	/* System Includes. */
	#include <tc1782.h>
	#include <machine/intrinsics.h>

	/*-----------------------------------------------------------
	* Port specific definitions.
	*
	* The settings in this file configure FreeRTOS correctly for the
	* given hardware and compiler.
	*
	* These settings should not be altered.
	*-----------------------------------------------------------
	*/

	/* Type definitions. */
	#define portCHAR char
	#define portFLOAT float
	#define portDOUBLE double
	#define portLONG long
	#define portSHORT short
	#define portSTACK_TYPE uint32_t
	#define portBASE_TYPE long

	typedef portSTACK_TYPE StackType_t;
	typedef long BaseType_t;
	typedef unsigned long UBaseType_t;

	#if( configUSE_16_BIT_TICKS == 1 )
	typedef uint16_t TickType_t;
	#define portMAX_DELAY ( TickType_t ) 0xffff
	#else
	typedef uint32_t TickType_t;
	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL

	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
	not need to be guarded with a critical section. */
	#define portTICK_TYPE_IS_ATOMIC 1
	#endif
	/---------------------------------------------------------------------------/

	/* Architecture specifics. */
	#define portSTACK_GROWTH ( -1 )
	#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
	#define portBYTE_ALIGNMENT 4
	#define portNOP() __asm volatile( " nop " )
	#define portCRITICAL_NESTING_IN_TCB 1
	#define portRESTORE_FIRST_TASK_PRIORITY_LEVEL 1


	/---------------------------------------------------------------------------/

	typedef struct MPU_SETTINGS { uint32_t ulNotUsed; } xMPU_SETTINGS;

	/* Define away the instruction from the Restore Context Macro. */
	#define portPRIVILEGE_BIT 0x0UL

	#define portCCPN_MASK ( 0x000000FFUL )

	extern void vTaskEnterCritical( void );
	extern void vTaskExitCritical( void );
	#define portENTER_CRITICAL() vTaskEnterCritical()
	#define portEXIT_CRITICAL() vTaskExitCritical()
	/---------------------------------------------------------------------------/

	/* CSA Manipulation. */
	#define portCSA_TO_ADDRESS( pCSA ) ( ( uint32_t * )( ( ( ( pCSA ) & 0x000F0000 ) << 12 ) \| ( ( ( pCSA ) & 0x0000FFFF ) << 6 ) ) )
	#define portADDRESS_TO_CSA( pAddress ) ( ( uint32_t )( ( ( ( (uint32_t)( pAddress ) ) & 0xF0000000 ) >> 12 ) \| ( ( ( uint32_t )( pAddress ) & 0x003FFFC0 ) >> 6 ) ) )
	/---------------------------------------------------------------------------/

	#define portYIELD() _syscall( 0 )
	/* Port Restore is implicit in the platform when the function is returned from the original PSW is automatically replaced. */
	#define portSYSCALL_TASK_YIELD 0
	#define portSYSCALL_RAISE_PRIORITY 1
	/---------------------------------------------------------------------------/

	/* Critical section management. */

	/* Set ICR.CCPN to configMAX_SYSCALL_INTERRUPT_PRIORITY. */
	#define portDISABLE_INTERRUPTS() { \
	uint32_t ulICR; \
	_disable(); \
	ulICR = __MFCR( $ICR ); /* Get current ICR value. */ \
	ulICR &= ~portCCPN_MASK; /* Clear down mask bits. */ \
	ulICR \|= configMAX_SYSCALL_INTERRUPT_PRIORITY; /* Set mask bits to required priority mask. */ \
	_mtcr( $ICR, ulICR ); /* Write back updated ICR. */ \
	_isync(); \
	_enable(); \
	}

	/* Clear ICR.CCPN to allow all interrupt priorities. */
	#define portENABLE_INTERRUPTS() { \
	uint32_t ulICR; \
	_disable(); \
	ulICR = __MFCR( $ICR ); /* Get current ICR value. */ \
	ulICR &= ~portCCPN_MASK; /* Clear down mask bits. */ \
	_mtcr( $ICR, ulICR ); /* Write back updated ICR. */ \
	_isync(); \
	_enable(); \
	}

	/* Set ICR.CCPN to uxSavedMaskValue. */
	#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedMaskValue ) { \
	uint32_t ulICR; \
	_disable(); \
	ulICR = __MFCR( $ICR ); /* Get current ICR value. */ \
	ulICR &= ~portCCPN_MASK; /* Clear down mask bits. */ \
	ulICR \|= uxSavedMaskValue; /* Set mask bits to previously saved mask value. */ \
	_mtcr( $ICR, ulICR ); /* Write back updated ICR. */ \
	_isync(); \
	_enable(); \
	}


	/* Set ICR.CCPN to configMAX_SYSCALL_INTERRUPT_PRIORITY */
	extern uint32_t uxPortSetInterruptMaskFromISR( void );
	#define portSET_INTERRUPT_MASK_FROM_ISR() uxPortSetInterruptMaskFromISR()

	/* Pend a priority 1 interrupt, which will take care of the context switch. */
	#define portYIELD_FROM_ISR( xHigherPriorityTaskWoken ) if( xHigherPriorityTaskWoken != pdFALSE ) { CPU_SRC0.bits.SETR = 1; _isync(); }

	/---------------------------------------------------------------------------/

	/* Task function macros as described on the FreeRTOS.org WEB site. */
	#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
	#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
	/---------------------------------------------------------------------------/

	/*
	* Port specific clean up macro required to free the CSAs that were consumed by
	* a task that has since been deleted.
	*/
	void vPortReclaimCSA( uint32_t *pxTCB );
	#define portCLEAN_UP_TCB( pxTCB ) vPortReclaimCSA( ( uint32_t * ) ( pxTCB ) )

	#ifdef __cplusplus
	}
	#endif

	#endif /* PORTMACRO_H */