#![no_std]
#![allow(clippy::erasing_op)]
#![allow(clippy::identity_op)]
#[doc = r" A zero-sized type that represents ownership of this"]
#[doc = r" peripheral, used to get access to a Register lock. Most"]
#[doc = r" programs create one of these in unsafe code near the top of"]
#[doc = r" main(), and pass it to the driver responsible for managing"]
#[doc = r" all access to the hardware."]
pub struct Usbdev {
    _priv: (),
}
impl Usbdev {
    pub const PTR: *mut u32 = 0x40320000 as *mut u32;
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" Caller must ensure that all concurrent use of this"]
    #[doc = r" peripheral in the firmware is done so in a compatible"]
    #[doc = r" way. The simplest way to enforce this is to only call"]
    #[doc = r" this function once."]
    #[inline(always)]
    pub const unsafe fn new() -> Self {
        Self { _priv: () }
    }
    #[doc = r" Returns a register block that can be used to read"]
    #[doc = r" registers from this peripheral, but cannot write."]
    #[inline(always)]
    pub fn regs(&self) -> RegisterBlock<ureg::RealMmio<'_>> {
        RegisterBlock {
            ptr: Self::PTR,
            mmio: core::default::Default::default(),
        }
    }
    #[doc = r" Return a register block that can be used to read and"]
    #[doc = r" write this peripheral's registers."]
    #[inline(always)]
    pub fn regs_mut(&mut self) -> RegisterBlock<ureg::RealMmioMut<'_>> {
        RegisterBlock {
            ptr: Self::PTR,
            mmio: core::default::Default::default(),
        }
    }
}
#[derive(Clone, Copy)]
pub struct RegisterBlock<TMmio: ureg::Mmio + core::borrow::Borrow<TMmio>> {
    ptr: *mut u32,
    mmio: TMmio,
}
impl<TMmio: ureg::Mmio + core::default::Default> RegisterBlock<TMmio> {
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" The caller is responsible for ensuring that ptr is valid for"]
    #[doc = r" volatile reads and writes at any of the offsets in this register"]
    #[doc = r" block."]
    #[inline(always)]
    pub unsafe fn new(ptr: *mut u32) -> Self {
        Self {
            ptr,
            mmio: core::default::Default::default(),
        }
    }
}
impl<TMmio: ureg::Mmio> RegisterBlock<TMmio> {
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" The caller is responsible for ensuring that ptr is valid for"]
    #[doc = r" volatile reads and writes at any of the offsets in this register"]
    #[doc = r" block."]
    #[inline(always)]
    pub unsafe fn new_with_mmio(ptr: *mut u32, mmio: TMmio) -> Self {
        Self { ptr, mmio }
    }
    #[doc = "Interrupt State Register\n\nRead value: [`regs::IntrStateReadVal`]; Write value: [`regs::IntrStateWriteVal`]"]
    #[inline(always)]
    pub fn intr_state(&self) -> ureg::RegRef<crate::meta::IntrState, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Interrupt State Register\n\nRead value: [`regs::IntrStateReadVal`]; Write value: [`regs::IntrStateWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_intr_state(self) -> ureg::RegRef<crate::meta::IntrState, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Interrupt Enable Register\n\nRead value: [`regs::IntrEnableReadVal`]; Write value: [`regs::IntrEnableWriteVal`]"]
    #[inline(always)]
    pub fn intr_enable(&self) -> ureg::RegRef<crate::meta::IntrEnable, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(4 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Interrupt Enable Register\n\nRead value: [`regs::IntrEnableReadVal`]; Write value: [`regs::IntrEnableWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_intr_enable(self) -> ureg::RegRef<crate::meta::IntrEnable, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(4 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Interrupt Test Register\n\nRead value: [`regs::IntrTestReadVal`]; Write value: [`regs::IntrTestWriteVal`]"]
    #[inline(always)]
    pub fn intr_test(&self) -> ureg::RegRef<crate::meta::IntrTest, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(8 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Interrupt Test Register\n\nRead value: [`regs::IntrTestReadVal`]; Write value: [`regs::IntrTestWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_intr_test(self) -> ureg::RegRef<crate::meta::IntrTest, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(8 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Alert Test Register\n\nRead value: [`regs::AlertTestReadVal`]; Write value: [`regs::AlertTestWriteVal`]"]
    #[inline(always)]
    pub fn alert_test(&self) -> ureg::RegRef<crate::meta::AlertTest, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xc / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Alert Test Register\n\nRead value: [`regs::AlertTestReadVal`]; Write value: [`regs::AlertTestWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_alert_test(self) -> ureg::RegRef<crate::meta::AlertTest, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xc / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB Control\n\nRead value: [`regs::UsbctrlReadVal`]; Write value: [`regs::UsbctrlWriteVal`]"]
    #[inline(always)]
    pub fn usbctrl(&self) -> ureg::RegRef<crate::meta::Usbctrl, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x10 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB Control\n\nRead value: [`regs::UsbctrlReadVal`]; Write value: [`regs::UsbctrlWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_usbctrl(self) -> ureg::RegRef<crate::meta::Usbctrl, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x10 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Enable an endpoint to respond to transactions in the downstream direction.\nNote that as the default endpoint, endpoint 0 must be enabled in both the IN and OUT directions before enabling the USB interface to connect.\n\nRead value: [`regs::EpOutEnable0ReadVal`]; Write value: [`regs::EpOutEnable0WriteVal`]"]
    #[inline(always)]
    pub fn ep_out_enable0(&self) -> ureg::RegRef<crate::meta::EpOutEnable0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x14 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Enable an endpoint to respond to transactions in the downstream direction.\nNote that as the default endpoint, endpoint 0 must be enabled in both the IN and OUT directions before enabling the USB interface to connect.\n\nRead value: [`regs::EpOutEnable0ReadVal`]; Write value: [`regs::EpOutEnable0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_ep_out_enable0(self) -> ureg::RegRef<crate::meta::EpOutEnable0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x14 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Enable an endpoint to respond to transactions in the upstream direction.\nNote that as the default endpoint, endpoint 0 must be enabled in both the IN and OUT directions before enabling the USB interface to connect.\n\nRead value: [`regs::EpInEnable0ReadVal`]; Write value: [`regs::EpInEnable0WriteVal`]"]
    #[inline(always)]
    pub fn ep_in_enable0(&self) -> ureg::RegRef<crate::meta::EpInEnable0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x18 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Enable an endpoint to respond to transactions in the upstream direction.\nNote that as the default endpoint, endpoint 0 must be enabled in both the IN and OUT directions before enabling the USB interface to connect.\n\nRead value: [`regs::EpInEnable0ReadVal`]; Write value: [`regs::EpInEnable0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_ep_in_enable0(self) -> ureg::RegRef<crate::meta::EpInEnable0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x18 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB Status\n\nRead value: [`regs::UsbstatReadVal`]; Write value: [`regs::UsbstatWriteVal`]"]
    #[inline(always)]
    pub fn usbstat(&self) -> ureg::RegRef<crate::meta::Usbstat, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x1c / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB Status\n\nRead value: [`regs::UsbstatReadVal`]; Write value: [`regs::UsbstatWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_usbstat(self) -> ureg::RegRef<crate::meta::Usbstat, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x1c / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Available OUT Buffer FIFO\n\nRead value: [`regs::AvoutbufferReadVal`]; Write value: [`regs::AvoutbufferWriteVal`]"]
    #[inline(always)]
    pub fn avoutbuffer(&self) -> ureg::RegRef<crate::meta::Avoutbuffer, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x20 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Available OUT Buffer FIFO\n\nRead value: [`regs::AvoutbufferReadVal`]; Write value: [`regs::AvoutbufferWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_avoutbuffer(self) -> ureg::RegRef<crate::meta::Avoutbuffer, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x20 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Available SETUP Buffer FIFO\n\nRead value: [`regs::AvsetupbufferReadVal`]; Write value: [`regs::AvsetupbufferWriteVal`]"]
    #[inline(always)]
    pub fn avsetupbuffer(&self) -> ureg::RegRef<crate::meta::Avsetupbuffer, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x24 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Available SETUP Buffer FIFO\n\nRead value: [`regs::AvsetupbufferReadVal`]; Write value: [`regs::AvsetupbufferWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_avsetupbuffer(self) -> ureg::RegRef<crate::meta::Avsetupbuffer, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x24 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Received Buffer FIFO\n\nRead value: [`regs::RxfifoReadVal`]; Write value: [`regs::RxfifoWriteVal`]"]
    #[inline(always)]
    pub fn rxfifo(&self) -> ureg::RegRef<crate::meta::Rxfifo, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x28 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Received Buffer FIFO\n\nRead value: [`regs::RxfifoReadVal`]; Write value: [`regs::RxfifoWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_rxfifo(self) -> ureg::RegRef<crate::meta::Rxfifo, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x28 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Receive SETUP transaction enable\n\nRead value: [`regs::RxenableSetup0ReadVal`]; Write value: [`regs::RxenableSetup0WriteVal`]"]
    #[inline(always)]
    pub fn rxenable_setup0(&self) -> ureg::RegRef<crate::meta::RxenableSetup0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x2c / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Receive SETUP transaction enable\n\nRead value: [`regs::RxenableSetup0ReadVal`]; Write value: [`regs::RxenableSetup0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_rxenable_setup0(self) -> ureg::RegRef<crate::meta::RxenableSetup0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x2c / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Receive OUT transaction enable\n\nRead value: [`regs::RxenableOut0ReadVal`]; Write value: [`regs::RxenableOut0WriteVal`]"]
    #[inline(always)]
    pub fn rxenable_out0(&self) -> ureg::RegRef<crate::meta::RxenableOut0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x30 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Receive OUT transaction enable\n\nRead value: [`regs::RxenableOut0ReadVal`]; Write value: [`regs::RxenableOut0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_rxenable_out0(self) -> ureg::RegRef<crate::meta::RxenableOut0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x30 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Set NAK after OUT transactions\n\nRead value: [`regs::SetNakOut0ReadVal`]; Write value: [`regs::SetNakOut0WriteVal`]"]
    #[inline(always)]
    pub fn set_nak_out0(&self) -> ureg::RegRef<crate::meta::SetNakOut0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x34 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Set NAK after OUT transactions\n\nRead value: [`regs::SetNakOut0ReadVal`]; Write value: [`regs::SetNakOut0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_set_nak_out0(self) -> ureg::RegRef<crate::meta::SetNakOut0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x34 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "IN Transaction Sent\n\nRead value: [`regs::InSent0ReadVal`]; Write value: [`regs::InSent0WriteVal`]"]
    #[inline(always)]
    pub fn in_sent0(&self) -> ureg::RegRef<crate::meta::InSent0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x38 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "IN Transaction Sent\n\nRead value: [`regs::InSent0ReadVal`]; Write value: [`regs::InSent0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_in_sent0(self) -> ureg::RegRef<crate::meta::InSent0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x38 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "OUT Endpoint STALL control\n\nRead value: [`regs::OutStall0ReadVal`]; Write value: [`regs::OutStall0WriteVal`]"]
    #[inline(always)]
    pub fn out_stall0(&self) -> ureg::RegRef<crate::meta::OutStall0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x3c / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "OUT Endpoint STALL control\n\nRead value: [`regs::OutStall0ReadVal`]; Write value: [`regs::OutStall0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_out_stall0(self) -> ureg::RegRef<crate::meta::OutStall0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x3c / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "IN Endpoint STALL control\n\nRead value: [`regs::InStall0ReadVal`]; Write value: [`regs::InStall0WriteVal`]"]
    #[inline(always)]
    pub fn in_stall0(&self) -> ureg::RegRef<crate::meta::InStall0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x40 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "IN Endpoint STALL control\n\nRead value: [`regs::InStall0ReadVal`]; Write value: [`regs::InStall0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_in_stall0(self) -> ureg::RegRef<crate::meta::InStall0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x40 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Configure IN Transaction\n\nRead value: [`regs::ConfiginReadVal`]; Write value: [`regs::ConfiginWriteVal`]"]
    #[inline(always)]
    pub fn configin(&self) -> ureg::Array<12, ureg::RegRef<crate::meta::Configin, &TMmio>> {
        unsafe {
            ureg::Array::new_with_mmio(
                self.ptr.wrapping_add(0x44 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Configure IN Transaction\n\nRead value: [`regs::ConfiginReadVal`]; Write value: [`regs::ConfiginWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_configin(self) -> ureg::Array<12, ureg::RegRef<crate::meta::Configin, TMmio>> {
        unsafe {
            ureg::Array::new_with_mmio(
                self.ptr.wrapping_add(0x44 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "OUT Endpoint isochronous setting\n\nRead value: [`regs::OutIso0ReadVal`]; Write value: [`regs::OutIso0WriteVal`]"]
    #[inline(always)]
    pub fn out_iso0(&self) -> ureg::RegRef<crate::meta::OutIso0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x74 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "OUT Endpoint isochronous setting\n\nRead value: [`regs::OutIso0ReadVal`]; Write value: [`regs::OutIso0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_out_iso0(self) -> ureg::RegRef<crate::meta::OutIso0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x74 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "IN Endpoint isochronous setting\n\nRead value: [`regs::InIso0ReadVal`]; Write value: [`regs::InIso0WriteVal`]"]
    #[inline(always)]
    pub fn in_iso0(&self) -> ureg::RegRef<crate::meta::InIso0, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x78 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "IN Endpoint isochronous setting\n\nRead value: [`regs::InIso0ReadVal`]; Write value: [`regs::InIso0WriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_in_iso0(self) -> ureg::RegRef<crate::meta::InIso0, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x78 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "OUT Endpoints Data Toggles\n\nRead value: [`regs::OutDataToggleReadVal`]; Write value: [`regs::OutDataToggleWriteVal`]"]
    #[inline(always)]
    pub fn out_data_toggle(&self) -> ureg::RegRef<crate::meta::OutDataToggle, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x7c / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "OUT Endpoints Data Toggles\n\nRead value: [`regs::OutDataToggleReadVal`]; Write value: [`regs::OutDataToggleWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_out_data_toggle(self) -> ureg::RegRef<crate::meta::OutDataToggle, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x7c / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "IN Endpoints Data Toggles\n\nRead value: [`regs::InDataToggleReadVal`]; Write value: [`regs::InDataToggleWriteVal`]"]
    #[inline(always)]
    pub fn in_data_toggle(&self) -> ureg::RegRef<crate::meta::InDataToggle, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x80 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "IN Endpoints Data Toggles\n\nRead value: [`regs::InDataToggleReadVal`]; Write value: [`regs::InDataToggleWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_in_data_toggle(self) -> ureg::RegRef<crate::meta::InDataToggle, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x80 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB PHY pins sense.\nThis register can be used to read out the state of the USB device inputs and outputs from software.\nThis is designed to be used for debugging purposes or during chip testing.\n\nRead value: [`regs::PhyPinsSenseReadVal`]; Write value: [`regs::PhyPinsSenseWriteVal`]"]
    #[inline(always)]
    pub fn phy_pins_sense(&self) -> ureg::RegRef<crate::meta::PhyPinsSense, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x84 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB PHY pins sense.\nThis register can be used to read out the state of the USB device inputs and outputs from software.\nThis is designed to be used for debugging purposes or during chip testing.\n\nRead value: [`regs::PhyPinsSenseReadVal`]; Write value: [`regs::PhyPinsSenseWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_phy_pins_sense(self) -> ureg::RegRef<crate::meta::PhyPinsSense, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x84 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB PHY pins drive.\nThis register can be used to control the USB device inputs and outputs from software.\nThis is designed to be used for debugging purposes or during chip testing.\n\nRead value: [`regs::PhyPinsDriveReadVal`]; Write value: [`regs::PhyPinsDriveWriteVal`]"]
    #[inline(always)]
    pub fn phy_pins_drive(&self) -> ureg::RegRef<crate::meta::PhyPinsDrive, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x88 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB PHY pins drive.\nThis register can be used to control the USB device inputs and outputs from software.\nThis is designed to be used for debugging purposes or during chip testing.\n\nRead value: [`regs::PhyPinsDriveReadVal`]; Write value: [`regs::PhyPinsDriveWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_phy_pins_drive(self) -> ureg::RegRef<crate::meta::PhyPinsDrive, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x88 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB PHY Configuration\n\nRead value: [`regs::PhyConfigReadVal`]; Write value: [`regs::PhyConfigWriteVal`]"]
    #[inline(always)]
    pub fn phy_config(&self) -> ureg::RegRef<crate::meta::PhyConfig, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x8c / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB PHY Configuration\n\nRead value: [`regs::PhyConfigReadVal`]; Write value: [`regs::PhyConfigWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_phy_config(self) -> ureg::RegRef<crate::meta::PhyConfig, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x8c / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB wake module control for suspend / resume\n\nRead value: [`regs::WakeControlReadVal`]; Write value: [`regs::WakeControlWriteVal`]"]
    #[inline(always)]
    pub fn wake_control(&self) -> ureg::RegRef<crate::meta::WakeControl, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x90 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB wake module control for suspend / resume\n\nRead value: [`regs::WakeControlReadVal`]; Write value: [`regs::WakeControlWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_wake_control(self) -> ureg::RegRef<crate::meta::WakeControl, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x90 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "USB wake module events and debug\n\nRead value: [`regs::WakeEventsReadVal`]; Write value: [`regs::WakeEventsWriteVal`]"]
    #[inline(always)]
    pub fn wake_events(&self) -> ureg::RegRef<crate::meta::WakeEvents, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x94 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "USB wake module events and debug\n\nRead value: [`regs::WakeEventsReadVal`]; Write value: [`regs::WakeEventsWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_wake_events(self) -> ureg::RegRef<crate::meta::WakeEvents, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x94 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "FIFO control register\n\nRead value: [`regs::FifoCtrlReadVal`]; Write value: [`regs::FifoCtrlWriteVal`]"]
    #[inline(always)]
    pub fn fifo_ctrl(&self) -> ureg::RegRef<crate::meta::FifoCtrl, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x98 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "FIFO control register\n\nRead value: [`regs::FifoCtrlReadVal`]; Write value: [`regs::FifoCtrlWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_fifo_ctrl(self) -> ureg::RegRef<crate::meta::FifoCtrl, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x98 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Counter for OUT side USB events.\n\nRead value: [`regs::CountOutReadVal`]; Write value: [`regs::CountOutWriteVal`]"]
    #[inline(always)]
    pub fn count_out(&self) -> ureg::RegRef<crate::meta::CountOut, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x9c / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Counter for OUT side USB events.\n\nRead value: [`regs::CountOutReadVal`]; Write value: [`regs::CountOutWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_count_out(self) -> ureg::RegRef<crate::meta::CountOut, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0x9c / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Counter for IN side USB events.\n\nRead value: [`regs::CountInReadVal`]; Write value: [`regs::CountInWriteVal`]"]
    #[inline(always)]
    pub fn count_in(&self) -> ureg::RegRef<crate::meta::CountIn, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xa0 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Counter for IN side USB events.\n\nRead value: [`regs::CountInReadVal`]; Write value: [`regs::CountInWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_count_in(self) -> ureg::RegRef<crate::meta::CountIn, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xa0 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Count of IN transactions for which no packet data was available.\n\nThis secondary register allows some partitioning of endpoints among the two\ncounters, for more targeted measurement, eg. endpoints may be grouped according to\nthe expected bandwidth usage, or Isochronous vs. non-Isochronous transfers.\n\nRead value: [`regs::CountNodataInReadVal`]; Write value: [`regs::CountNodataInWriteVal`]"]
    #[inline(always)]
    pub fn count_nodata_in(&self) -> ureg::RegRef<crate::meta::CountNodataIn, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xa4 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Count of IN transactions for which no packet data was available.\n\nThis secondary register allows some partitioning of endpoints among the two\ncounters, for more targeted measurement, eg. endpoints may be grouped according to\nthe expected bandwidth usage, or Isochronous vs. non-Isochronous transfers.\n\nRead value: [`regs::CountNodataInReadVal`]; Write value: [`regs::CountNodataInWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_count_nodata_in(self) -> ureg::RegRef<crate::meta::CountNodataIn, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xa4 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "Count of error conditions detected on token packets from the host.\n\nRead value: [`regs::CountErrorsReadVal`]; Write value: [`regs::CountErrorsWriteVal`]"]
    #[inline(always)]
    pub fn count_errors(&self) -> ureg::RegRef<crate::meta::CountErrors, &TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xa8 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "Count of error conditions detected on token packets from the host.\n\nRead value: [`regs::CountErrorsReadVal`]; Write value: [`regs::CountErrorsWriteVal`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_count_errors(self) -> ureg::RegRef<crate::meta::CountErrors, TMmio> {
        unsafe {
            ureg::RegRef::new_with_mmio(
                self.ptr.wrapping_add(0xa8 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
    #[doc = "2 KiB packet buffer. Divided into thirty two 64-byte buffers.\n\nThe packet buffer is used for sending and receiving packets.\n\nRead value: [`u32`]; Write value: [`u32`]"]
    #[inline(always)]
    pub fn buffer(&self) -> ureg::Array<512, ureg::RegRef<crate::meta::Buffer, &TMmio>> {
        unsafe {
            ureg::Array::new_with_mmio(
                self.ptr.wrapping_add(0x800 / core::mem::size_of::<u32>()),
                core::borrow::Borrow::borrow(&self.mmio),
            )
        }
    }
    #[doc = "2 KiB packet buffer. Divided into thirty two 64-byte buffers.\n\nThe packet buffer is used for sending and receiving packets.\n\nRead value: [`u32`]; Write value: [`u32`]"]
    #[doc = "This function consumes the entire register block, which is useful when transferring ownership."]
    #[inline(always)]
    pub fn into_buffer(self) -> ureg::Array<512, ureg::RegRef<crate::meta::Buffer, TMmio>> {
        unsafe {
            ureg::Array::new_with_mmio(
                self.ptr.wrapping_add(0x800 / core::mem::size_of::<u32>()),
                self.mmio,
            )
        }
    }
}
pub mod regs {
    #![doc = r" Types that represent the values held by registers."]
    #[derive(Clone, Copy)]
    pub struct AlertTestWriteVal(pub u32);
    impl AlertTestWriteVal {
        #[doc = "Write 1 to trigger one alert event of this kind."]
        #[inline(always)]
        pub const fn fatal_fault(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
    }
    impl From<u32> for AlertTestWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<AlertTestWriteVal> for u32 {
        #[inline(always)]
        fn from(val: AlertTestWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct IntrEnableReadVal(pub u32);
    impl IntrEnableReadVal {
        #[doc = "Enable interrupt when !!INTR_STATE.pkt_received is set."]
        #[inline(always)]
        pub const fn pkt_received(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.pkt_sent is set."]
        #[inline(always)]
        pub const fn pkt_sent(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.disconnected is set."]
        #[inline(always)]
        pub const fn disconnected(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.host_lost is set."]
        #[inline(always)]
        pub const fn host_lost(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_reset is set."]
        #[inline(always)]
        pub const fn link_reset(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_suspend is set."]
        #[inline(always)]
        pub const fn link_suspend(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_resume is set."]
        #[inline(always)]
        pub const fn link_resume(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.av_out_empty is set."]
        #[inline(always)]
        pub const fn av_out_empty(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_full is set."]
        #[inline(always)]
        pub const fn rx_full(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.av_overflow is set."]
        #[inline(always)]
        pub const fn av_overflow(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_in_err is set."]
        #[inline(always)]
        pub const fn link_in_err(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_crc_err is set."]
        #[inline(always)]
        pub const fn rx_crc_err(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_pid_err is set."]
        #[inline(always)]
        pub const fn rx_pid_err(&self) -> bool {
            ((self.0 >> 12) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_bitstuff_err is set."]
        #[inline(always)]
        pub const fn rx_bitstuff_err(&self) -> bool {
            ((self.0 >> 13) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.frame is set."]
        #[inline(always)]
        pub const fn frame(&self) -> bool {
            ((self.0 >> 14) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.powered is set."]
        #[inline(always)]
        pub const fn powered(&self) -> bool {
            ((self.0 >> 15) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_out_err is set."]
        #[inline(always)]
        pub const fn link_out_err(&self) -> bool {
            ((self.0 >> 16) & 1) != 0
        }
        #[doc = "Enable interrupt when !!INTR_STATE.av_setup_empty is set."]
        #[inline(always)]
        pub const fn av_setup_empty(&self) -> bool {
            ((self.0 >> 17) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> IntrEnableWriteVal {
            IntrEnableWriteVal(self.0)
        }
    }
    impl From<u32> for IntrEnableReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<IntrEnableReadVal> for u32 {
        #[inline(always)]
        fn from(val: IntrEnableReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct IntrEnableWriteVal(pub u32);
    impl IntrEnableWriteVal {
        #[doc = "Enable interrupt when !!INTR_STATE.pkt_received is set."]
        #[inline(always)]
        pub const fn pkt_received(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.pkt_sent is set."]
        #[inline(always)]
        pub const fn pkt_sent(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.disconnected is set."]
        #[inline(always)]
        pub const fn disconnected(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.host_lost is set."]
        #[inline(always)]
        pub const fn host_lost(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_reset is set."]
        #[inline(always)]
        pub const fn link_reset(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_suspend is set."]
        #[inline(always)]
        pub const fn link_suspend(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_resume is set."]
        #[inline(always)]
        pub const fn link_resume(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.av_out_empty is set."]
        #[inline(always)]
        pub const fn av_out_empty(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_full is set."]
        #[inline(always)]
        pub const fn rx_full(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.av_overflow is set."]
        #[inline(always)]
        pub const fn av_overflow(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_in_err is set."]
        #[inline(always)]
        pub const fn link_in_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_crc_err is set."]
        #[inline(always)]
        pub const fn rx_crc_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_pid_err is set."]
        #[inline(always)]
        pub const fn rx_pid_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 12)) | (val as u32) << 12)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.rx_bitstuff_err is set."]
        #[inline(always)]
        pub const fn rx_bitstuff_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 13)) | (val as u32) << 13)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.frame is set."]
        #[inline(always)]
        pub const fn frame(self, val: bool) -> Self {
            Self((self.0 & !(1 << 14)) | (val as u32) << 14)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.powered is set."]
        #[inline(always)]
        pub const fn powered(self, val: bool) -> Self {
            Self((self.0 & !(1 << 15)) | (val as u32) << 15)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.link_out_err is set."]
        #[inline(always)]
        pub const fn link_out_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 16)) | (val as u32) << 16)
        }
        #[doc = "Enable interrupt when !!INTR_STATE.av_setup_empty is set."]
        #[inline(always)]
        pub const fn av_setup_empty(self, val: bool) -> Self {
            Self((self.0 & !(1 << 17)) | (val as u32) << 17)
        }
    }
    impl From<u32> for IntrEnableWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<IntrEnableWriteVal> for u32 {
        #[inline(always)]
        fn from(val: IntrEnableWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct IntrStateReadVal(pub u32);
    impl IntrStateReadVal {
        #[doc = "Raised if a packet was received using an OUT or SETUP transaction.\nThis interrupt is directly tied to whether the RX FIFO is empty, so it should be cleared only after handling the FIFO entry."]
        #[inline(always)]
        pub const fn pkt_received(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "Raised if a packet was sent as part of an IN transaction.\nThis interrupt is directly tied to whether a sent packet has not been acknowledged in the !!in_sent register.\nIt should be cleared only after clearing all bits in the !!in_sent register."]
        #[inline(always)]
        pub const fn pkt_sent(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "Raised if VBUS is lost, thus the link is disconnected."]
        #[inline(always)]
        pub const fn disconnected(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "Raised if link is active but SOF was not received from host for 4.096 ms. The SOF should be every 1 ms."]
        #[inline(always)]
        pub const fn host_lost(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "Raised if the link is at SE0 longer than 3 us indicating a link reset (host asserts for min 10 ms, device can react after 2.5 us)."]
        #[inline(always)]
        pub const fn link_reset(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "Raised if the line has signaled J for longer than 3ms and is therefore in suspend state."]
        #[inline(always)]
        pub const fn link_suspend(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "Raised when the link becomes active again after being suspended."]
        #[inline(always)]
        pub const fn link_resume(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "Raised when the Available OUT Buffer FIFO is empty and the device interface is enabled.\nThis interrupt is directly tied to the FIFO status, so the Available OUT Buffer FIFO must be provided with a free buffer before the interrupt can be cleared."]
        #[inline(always)]
        pub const fn av_out_empty(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "Raised when the RX FIFO is full and the device interface is enabled.\nThis interrupt is directly tied to the FIFO status, so the RX FIFO must have an entry removed before the interrupt is cleared.\nIf the condition is not cleared, the interrupt can re-assert."]
        #[inline(always)]
        pub const fn rx_full(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "Raised if a write was done to either the Available OUT Buffer FIFO or the Available SETUP Buffer FIFO when the FIFO was full."]
        #[inline(always)]
        pub const fn av_overflow(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "Raised if a packet to an IN endpoint started to be received but was\nthen dropped due to an error. After transmitting the IN payload,\nthe USB device expects a valid ACK handshake packet. This error is\nraised if either the packet or CRC is invalid, leading to a NAK instead,\nor if a different token was received."]
        #[inline(always)]
        pub const fn link_in_err(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "Raised if a CRC error occurred on a received packet."]
        #[inline(always)]
        pub const fn rx_crc_err(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = "Raised if an invalid Packet IDentifier (PID) was received."]
        #[inline(always)]
        pub const fn rx_pid_err(&self) -> bool {
            ((self.0 >> 12) & 1) != 0
        }
        #[doc = "Raised if an invalid bitstuffing was received."]
        #[inline(always)]
        pub const fn rx_bitstuff_err(&self) -> bool {
            ((self.0 >> 13) & 1) != 0
        }
        #[doc = "Raised when the USB frame number is updated with a valid SOF."]
        #[inline(always)]
        pub const fn frame(&self) -> bool {
            ((self.0 >> 14) & 1) != 0
        }
        #[doc = "Raised if VBUS is applied."]
        #[inline(always)]
        pub const fn powered(&self) -> bool {
            ((self.0 >> 15) & 1) != 0
        }
        #[doc = "Raised if a packet to an OUT endpoint started to be received but was then dropped due to an error.\nThis error is raised if the data toggle, token, packet and/or CRC are invalid, or if the appropriate Available OUT Buffer FIFO is empty and/or the Received Buffer FIFO is full when a packet should have been received."]
        #[inline(always)]
        pub const fn link_out_err(&self) -> bool {
            ((self.0 >> 16) & 1) != 0
        }
        #[doc = "Raised when the Available SETUP Buffer FIFO is empty and the device interface is enabled.\nThis interrupt is directly tied to the FIFO status, so the Available SETUP Buffer FIFO must be provided with a free buffer before the interrupt can be cleared."]
        #[inline(always)]
        pub const fn av_setup_empty(&self) -> bool {
            ((self.0 >> 17) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> IntrStateWriteVal {
            IntrStateWriteVal(self.0)
        }
    }
    impl From<u32> for IntrStateReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<IntrStateReadVal> for u32 {
        #[inline(always)]
        fn from(val: IntrStateReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct IntrStateWriteVal(pub u32);
    impl IntrStateWriteVal {
        #[doc = "Raised if VBUS is lost, thus the link is disconnected."]
        #[inline(always)]
        pub const fn disconnected_clear(self) -> Self {
            Self(self.0 | (1 << 2))
        }
        #[doc = "Raised if link is active but SOF was not received from host for 4.096 ms. The SOF should be every 1 ms."]
        #[inline(always)]
        pub const fn host_lost_clear(self) -> Self {
            Self(self.0 | (1 << 3))
        }
        #[doc = "Raised if the link is at SE0 longer than 3 us indicating a link reset (host asserts for min 10 ms, device can react after 2.5 us)."]
        #[inline(always)]
        pub const fn link_reset_clear(self) -> Self {
            Self(self.0 | (1 << 4))
        }
        #[doc = "Raised if the line has signaled J for longer than 3ms and is therefore in suspend state."]
        #[inline(always)]
        pub const fn link_suspend_clear(self) -> Self {
            Self(self.0 | (1 << 5))
        }
        #[doc = "Raised when the link becomes active again after being suspended."]
        #[inline(always)]
        pub const fn link_resume_clear(self) -> Self {
            Self(self.0 | (1 << 6))
        }
        #[doc = "Raised if a write was done to either the Available OUT Buffer FIFO or the Available SETUP Buffer FIFO when the FIFO was full."]
        #[inline(always)]
        pub const fn av_overflow_clear(self) -> Self {
            Self(self.0 | (1 << 9))
        }
        #[doc = "Raised if a packet to an IN endpoint started to be received but was\nthen dropped due to an error. After transmitting the IN payload,\nthe USB device expects a valid ACK handshake packet. This error is\nraised if either the packet or CRC is invalid, leading to a NAK instead,\nor if a different token was received."]
        #[inline(always)]
        pub const fn link_in_err_clear(self) -> Self {
            Self(self.0 | (1 << 10))
        }
        #[doc = "Raised if a CRC error occurred on a received packet."]
        #[inline(always)]
        pub const fn rx_crc_err_clear(self) -> Self {
            Self(self.0 | (1 << 11))
        }
        #[doc = "Raised if an invalid Packet IDentifier (PID) was received."]
        #[inline(always)]
        pub const fn rx_pid_err_clear(self) -> Self {
            Self(self.0 | (1 << 12))
        }
        #[doc = "Raised if an invalid bitstuffing was received."]
        #[inline(always)]
        pub const fn rx_bitstuff_err_clear(self) -> Self {
            Self(self.0 | (1 << 13))
        }
        #[doc = "Raised when the USB frame number is updated with a valid SOF."]
        #[inline(always)]
        pub const fn frame_clear(self) -> Self {
            Self(self.0 | (1 << 14))
        }
        #[doc = "Raised if VBUS is applied."]
        #[inline(always)]
        pub const fn powered_clear(self) -> Self {
            Self(self.0 | (1 << 15))
        }
        #[doc = "Raised if a packet to an OUT endpoint started to be received but was then dropped due to an error.\nThis error is raised if the data toggle, token, packet and/or CRC are invalid, or if the appropriate Available OUT Buffer FIFO is empty and/or the Received Buffer FIFO is full when a packet should have been received."]
        #[inline(always)]
        pub const fn link_out_err_clear(self) -> Self {
            Self(self.0 | (1 << 16))
        }
    }
    impl From<u32> for IntrStateWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<IntrStateWriteVal> for u32 {
        #[inline(always)]
        fn from(val: IntrStateWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct IntrTestWriteVal(pub u32);
    impl IntrTestWriteVal {
        #[doc = "Write 1 to force !!INTR_STATE.pkt_received to 1."]
        #[inline(always)]
        pub const fn pkt_received(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "Write 1 to force !!INTR_STATE.pkt_sent to 1."]
        #[inline(always)]
        pub const fn pkt_sent(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "Write 1 to force !!INTR_STATE.disconnected to 1."]
        #[inline(always)]
        pub const fn disconnected(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "Write 1 to force !!INTR_STATE.host_lost to 1."]
        #[inline(always)]
        pub const fn host_lost(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "Write 1 to force !!INTR_STATE.link_reset to 1."]
        #[inline(always)]
        pub const fn link_reset(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "Write 1 to force !!INTR_STATE.link_suspend to 1."]
        #[inline(always)]
        pub const fn link_suspend(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "Write 1 to force !!INTR_STATE.link_resume to 1."]
        #[inline(always)]
        pub const fn link_resume(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "Write 1 to force !!INTR_STATE.av_out_empty to 1."]
        #[inline(always)]
        pub const fn av_out_empty(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "Write 1 to force !!INTR_STATE.rx_full to 1."]
        #[inline(always)]
        pub const fn rx_full(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "Write 1 to force !!INTR_STATE.av_overflow to 1."]
        #[inline(always)]
        pub const fn av_overflow(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "Write 1 to force !!INTR_STATE.link_in_err to 1."]
        #[inline(always)]
        pub const fn link_in_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "Write 1 to force !!INTR_STATE.rx_crc_err to 1."]
        #[inline(always)]
        pub const fn rx_crc_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
        #[doc = "Write 1 to force !!INTR_STATE.rx_pid_err to 1."]
        #[inline(always)]
        pub const fn rx_pid_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 12)) | (val as u32) << 12)
        }
        #[doc = "Write 1 to force !!INTR_STATE.rx_bitstuff_err to 1."]
        #[inline(always)]
        pub const fn rx_bitstuff_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 13)) | (val as u32) << 13)
        }
        #[doc = "Write 1 to force !!INTR_STATE.frame to 1."]
        #[inline(always)]
        pub const fn frame(self, val: bool) -> Self {
            Self((self.0 & !(1 << 14)) | (val as u32) << 14)
        }
        #[doc = "Write 1 to force !!INTR_STATE.powered to 1."]
        #[inline(always)]
        pub const fn powered(self, val: bool) -> Self {
            Self((self.0 & !(1 << 15)) | (val as u32) << 15)
        }
        #[doc = "Write 1 to force !!INTR_STATE.link_out_err to 1."]
        #[inline(always)]
        pub const fn link_out_err(self, val: bool) -> Self {
            Self((self.0 & !(1 << 16)) | (val as u32) << 16)
        }
        #[doc = "Write 1 to force !!INTR_STATE.av_setup_empty to 1."]
        #[inline(always)]
        pub const fn av_setup_empty(self, val: bool) -> Self {
            Self((self.0 & !(1 << 17)) | (val as u32) << 17)
        }
    }
    impl From<u32> for IntrTestWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<IntrTestWriteVal> for u32 {
        #[inline(always)]
        fn from(val: IntrTestWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct AvoutbufferWriteVal(pub u32);
    impl AvoutbufferWriteVal {
        #[doc = "This field contains the buffer ID being passed to the USB receive engine.\n\nIf the Available OUT Buffer FIFO is full, any write operations are discarded."]
        #[inline(always)]
        pub const fn buffer(self, val: u32) -> Self {
            Self((self.0 & !(0x1f << 0)) | ((val & 0x1f) << 0))
        }
    }
    impl From<u32> for AvoutbufferWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<AvoutbufferWriteVal> for u32 {
        #[inline(always)]
        fn from(val: AvoutbufferWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct AvsetupbufferWriteVal(pub u32);
    impl AvsetupbufferWriteVal {
        #[doc = "This field contains the buffer ID being passed to the USB receive engine.\n\nIf the Available SETUP Buffer FIFO is full, any write operations are discarded."]
        #[inline(always)]
        pub const fn buffer(self, val: u32) -> Self {
            Self((self.0 & !(0x1f << 0)) | ((val & 0x1f) << 0))
        }
    }
    impl From<u32> for AvsetupbufferWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<AvsetupbufferWriteVal> for u32 {
        #[inline(always)]
        fn from(val: AvsetupbufferWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct ConfiginReadVal(pub u32);
    impl ConfiginReadVal {
        #[doc = "The buffer ID containing the data to send when an IN transaction is received on the endpoint."]
        #[inline(always)]
        pub const fn buffer(&self) -> u32 {
            (self.0 >> 0) & 0x1f
        }
        #[doc = "The number of bytes to send from the buffer.\n\nIf this is 0 then a CRC only packet is sent.\n\nIf this is greater than 64 then 64 bytes are sent."]
        #[inline(always)]
        pub const fn size(&self) -> u32 {
            (self.0 >> 8) & 0x7f
        }
        #[doc = "This bit indicates that the buffer is in the process of being collected by the\nhost. It becomes set upon the first attempt by the host to collect a buffer from\nthis endpoint when the rdy bit was set.\n\nIt is cleared when the packet has been collected successfully or the pending\ntransaction has been canceled by the hardware through detection of a\nlink reset or receipt of a SETUP packet."]
        #[inline(always)]
        pub const fn sending(&self) -> bool {
            ((self.0 >> 29) & 1) != 0
        }
        #[doc = "This bit indicates a pending transaction was canceled by the hardware.\n\nThe bit is set when the rdy bit is cleared by hardware because of a\nSETUP packet being received or a link reset being detected.\n\nThe bit remains set until cleared by being written with a 1."]
        #[inline(always)]
        pub const fn pend(&self) -> bool {
            ((self.0 >> 30) & 1) != 0
        }
        #[doc = "This bit should be set to indicate the buffer is ready for sending.\nIt will be cleared when the ACK is received indicating the host has accepted the data.\n\nThis bit will also be cleared if an enabled SETUP transaction is received on the endpoint.\nThis allows use of the IN channel for transfer of SETUP information.\nThe original buffer must be resubmitted after the SETUP sequence is complete.\nA link reset also clears the bit.\nIn either of the cases where the hardware cancels the transaction it will also set the pend bit."]
        #[inline(always)]
        pub const fn rdy(&self) -> bool {
            ((self.0 >> 31) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> ConfiginWriteVal {
            ConfiginWriteVal(self.0)
        }
    }
    impl From<u32> for ConfiginReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<ConfiginReadVal> for u32 {
        #[inline(always)]
        fn from(val: ConfiginReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct ConfiginWriteVal(pub u32);
    impl ConfiginWriteVal {
        #[doc = "The buffer ID containing the data to send when an IN transaction is received on the endpoint."]
        #[inline(always)]
        pub const fn buffer(self, val: u32) -> Self {
            Self((self.0 & !(0x1f << 0)) | ((val & 0x1f) << 0))
        }
        #[doc = "The number of bytes to send from the buffer.\n\nIf this is 0 then a CRC only packet is sent.\n\nIf this is greater than 64 then 64 bytes are sent."]
        #[inline(always)]
        pub const fn size(self, val: u32) -> Self {
            Self((self.0 & !(0x7f << 8)) | ((val & 0x7f) << 8))
        }
        #[doc = "This bit indicates that the buffer is in the process of being collected by the\nhost. It becomes set upon the first attempt by the host to collect a buffer from\nthis endpoint when the rdy bit was set.\n\nIt is cleared when the packet has been collected successfully or the pending\ntransaction has been canceled by the hardware through detection of a\nlink reset or receipt of a SETUP packet."]
        #[inline(always)]
        pub const fn sending_clear(self) -> Self {
            Self(self.0 | (1 << 29))
        }
        #[doc = "This bit indicates a pending transaction was canceled by the hardware.\n\nThe bit is set when the rdy bit is cleared by hardware because of a\nSETUP packet being received or a link reset being detected.\n\nThe bit remains set until cleared by being written with a 1."]
        #[inline(always)]
        pub const fn pend_clear(self) -> Self {
            Self(self.0 | (1 << 30))
        }
        #[doc = "This bit should be set to indicate the buffer is ready for sending.\nIt will be cleared when the ACK is received indicating the host has accepted the data.\n\nThis bit will also be cleared if an enabled SETUP transaction is received on the endpoint.\nThis allows use of the IN channel for transfer of SETUP information.\nThe original buffer must be resubmitted after the SETUP sequence is complete.\nA link reset also clears the bit.\nIn either of the cases where the hardware cancels the transaction it will also set the pend bit."]
        #[inline(always)]
        pub const fn rdy(self, val: bool) -> Self {
            Self((self.0 & !(1 << 31)) | (val as u32) << 31)
        }
    }
    impl From<u32> for ConfiginWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<ConfiginWriteVal> for u32 {
        #[inline(always)]
        fn from(val: ConfiginWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountErrorsReadVal(pub u32);
    impl CountErrorsReadVal {
        #[doc = "Number of events counted."]
        #[inline(always)]
        pub const fn count(&self) -> u32 {
            (self.0 >> 0) & 0xff
        }
        #[doc = "Number of Invalid PIDs detected on packets from the host. Invalid PIDs may\nindicate very unreliable communication and/or a substantial frequency mismatch\nbetween the host and the device."]
        #[inline(always)]
        pub const fn pid_invalid(&self) -> bool {
            ((self.0 >> 27) & 1) != 0
        }
        #[doc = "Number of SETUP/OUT packets that were ignored, dropped or NAKed because a\nBit Stuffing error was detected."]
        #[inline(always)]
        pub const fn bitstuff(&self) -> bool {
            ((self.0 >> 28) & 1) != 0
        }
        #[doc = "Count SETUP/OUT DATA packets that were ignored, dropped or NAKed because a\nCRC16 error was detected."]
        #[inline(always)]
        pub const fn crc16(&self) -> bool {
            ((self.0 >> 29) & 1) != 0
        }
        #[doc = "Count CRC5 errors detected on token packets sent by the host. CRC5 errors on\ntoken packets received from the host indicate very unreliable communication and\npossibly a substantial frequency mismatch between the host and the device."]
        #[inline(always)]
        pub const fn crc5(&self) -> bool {
            ((self.0 >> 30) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> CountErrorsWriteVal {
            CountErrorsWriteVal(self.0)
        }
    }
    impl From<u32> for CountErrorsReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountErrorsReadVal> for u32 {
        #[inline(always)]
        fn from(val: CountErrorsReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountErrorsWriteVal(pub u32);
    impl CountErrorsWriteVal {
        #[doc = "Number of Invalid PIDs detected on packets from the host. Invalid PIDs may\nindicate very unreliable communication and/or a substantial frequency mismatch\nbetween the host and the device."]
        #[inline(always)]
        pub const fn pid_invalid(self, val: bool) -> Self {
            Self((self.0 & !(1 << 27)) | (val as u32) << 27)
        }
        #[doc = "Number of SETUP/OUT packets that were ignored, dropped or NAKed because a\nBit Stuffing error was detected."]
        #[inline(always)]
        pub const fn bitstuff(self, val: bool) -> Self {
            Self((self.0 & !(1 << 28)) | (val as u32) << 28)
        }
        #[doc = "Count SETUP/OUT DATA packets that were ignored, dropped or NAKed because a\nCRC16 error was detected."]
        #[inline(always)]
        pub const fn crc16(self, val: bool) -> Self {
            Self((self.0 & !(1 << 29)) | (val as u32) << 29)
        }
        #[doc = "Count CRC5 errors detected on token packets sent by the host. CRC5 errors on\ntoken packets received from the host indicate very unreliable communication and\npossibly a substantial frequency mismatch between the host and the device."]
        #[inline(always)]
        pub const fn crc5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 30)) | (val as u32) << 30)
        }
        #[doc = "Write 1 to reset the counter."]
        #[inline(always)]
        pub const fn rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 31)) | (val as u32) << 31)
        }
    }
    impl From<u32> for CountErrorsWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountErrorsWriteVal> for u32 {
        #[inline(always)]
        fn from(val: CountErrorsWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountInReadVal(pub u32);
    impl CountInReadVal {
        #[doc = "Number of events counted."]
        #[inline(always)]
        pub const fn count(&self) -> u32 {
            (self.0 >> 0) & 0xff
        }
        #[doc = "Count the IN transactions that were attempted when there was no packet available\nin the corresponding 'configin' register(s). This is not necessarily an error\ncondition, and the counter primarily offers some visibility into when the IN\ntraffic is underusing the available bus bandwidth.\nIt is of particular utility to Isochronous IN endpoints."]
        #[inline(always)]
        pub const fn nodata(&self) -> bool {
            ((self.0 >> 13) & 1) != 0
        }
        #[doc = "Count the IN transactions rejected by the host responding with a NAK handshake."]
        #[inline(always)]
        pub const fn nak(&self) -> bool {
            ((self.0 >> 14) & 1) != 0
        }
        #[doc = "Count the IN transactions for which the USB host did not respond with a handshake,\nand the transactions timed out. This indicates that the host did not receive it\nand decode it as a valid packet, suggesting that communication is unreliable.\n\nIsochronous IN transactions are excluded from this count because there is no\nhandshake response to Isochronous packet transfers."]
        #[inline(always)]
        pub const fn timeout(&self) -> bool {
            ((self.0 >> 15) & 1) != 0
        }
        #[doc = "Set of endpoints for which this counter is enabled."]
        #[inline(always)]
        pub const fn endpoints(&self) -> u32 {
            (self.0 >> 16) & 0xfff
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> CountInWriteVal {
            CountInWriteVal(self.0)
        }
    }
    impl From<u32> for CountInReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountInReadVal> for u32 {
        #[inline(always)]
        fn from(val: CountInReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountInWriteVal(pub u32);
    impl CountInWriteVal {
        #[doc = "Count the IN transactions that were attempted when there was no packet available\nin the corresponding 'configin' register(s). This is not necessarily an error\ncondition, and the counter primarily offers some visibility into when the IN\ntraffic is underusing the available bus bandwidth.\nIt is of particular utility to Isochronous IN endpoints."]
        #[inline(always)]
        pub const fn nodata(self, val: bool) -> Self {
            Self((self.0 & !(1 << 13)) | (val as u32) << 13)
        }
        #[doc = "Count the IN transactions rejected by the host responding with a NAK handshake."]
        #[inline(always)]
        pub const fn nak(self, val: bool) -> Self {
            Self((self.0 & !(1 << 14)) | (val as u32) << 14)
        }
        #[doc = "Count the IN transactions for which the USB host did not respond with a handshake,\nand the transactions timed out. This indicates that the host did not receive it\nand decode it as a valid packet, suggesting that communication is unreliable.\n\nIsochronous IN transactions are excluded from this count because there is no\nhandshake response to Isochronous packet transfers."]
        #[inline(always)]
        pub const fn timeout(self, val: bool) -> Self {
            Self((self.0 & !(1 << 15)) | (val as u32) << 15)
        }
        #[doc = "Set of endpoints for which this counter is enabled."]
        #[inline(always)]
        pub const fn endpoints(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 16)) | ((val & 0xfff) << 16))
        }
        #[doc = "Write 1 to reset the counter."]
        #[inline(always)]
        pub const fn rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 31)) | (val as u32) << 31)
        }
    }
    impl From<u32> for CountInWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountInWriteVal> for u32 {
        #[inline(always)]
        fn from(val: CountInWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountNodataInReadVal(pub u32);
    impl CountNodataInReadVal {
        #[doc = "Number of IN transactions that were attempted when there was no packet available\nin the corresponding 'configin' register(s)."]
        #[inline(always)]
        pub const fn count(&self) -> u32 {
            (self.0 >> 0) & 0xff
        }
        #[doc = "Set of endpoints for which this counter is enabled."]
        #[inline(always)]
        pub const fn endpoints(&self) -> u32 {
            (self.0 >> 16) & 0xfff
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> CountNodataInWriteVal {
            CountNodataInWriteVal(self.0)
        }
    }
    impl From<u32> for CountNodataInReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountNodataInReadVal> for u32 {
        #[inline(always)]
        fn from(val: CountNodataInReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountNodataInWriteVal(pub u32);
    impl CountNodataInWriteVal {
        #[doc = "Set of endpoints for which this counter is enabled."]
        #[inline(always)]
        pub const fn endpoints(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 16)) | ((val & 0xfff) << 16))
        }
        #[doc = "Write 1 to reset the counter."]
        #[inline(always)]
        pub const fn rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 31)) | (val as u32) << 31)
        }
    }
    impl From<u32> for CountNodataInWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountNodataInWriteVal> for u32 {
        #[inline(always)]
        fn from(val: CountNodataInWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountOutReadVal(pub u32);
    impl CountOutReadVal {
        #[doc = "Number of events counted."]
        #[inline(always)]
        pub const fn count(&self) -> u32 {
            (self.0 >> 0) & 0xff
        }
        #[doc = "Count the OUT transactions for which the USB device acknowledged the OUT packet\nand dropped it internally, which is the correct response to a packet transmitted\nwith an incorrect Data Toggle.\n\nThe expectation is that this packet is a retry of the previous packet transmission\nand that the handshake response was not received intact by the USB host, indicating\nunreliable communications.\n\nOther causes of Data Toggle synchronization failure may result in data loss."]
        #[inline(always)]
        pub const fn datatog_out(&self) -> bool {
            ((self.0 >> 12) & 1) != 0
        }
        #[doc = "Count the SETUP/OUT packets ignored, dropped or NAKed because the RX FIFO was full.\nSETUP packets have been ignored, Isochronous OUT packets have been dropped, and\nnon-Isochronous OUT packets have been NAKed."]
        #[inline(always)]
        pub const fn drop_rx(&self) -> bool {
            ((self.0 >> 13) & 1) != 0
        }
        #[doc = "Count the OUT packets that could not be accepted because there was no buffer in the\nAv OUT FIFO. Non-Isochronous OUT packets have been NAKed.\nIsochronous OUT packets were ignored."]
        #[inline(always)]
        pub const fn drop_avout(&self) -> bool {
            ((self.0 >> 14) & 1) != 0
        }
        #[doc = "Count the SETUP packets that were ignored because there was no buffer in the\nAv SETUP FIFO."]
        #[inline(always)]
        pub const fn ign_avsetup(&self) -> bool {
            ((self.0 >> 15) & 1) != 0
        }
        #[doc = "Set of OUT endpoints for which this counter is enabled."]
        #[inline(always)]
        pub const fn endpoints(&self) -> u32 {
            (self.0 >> 16) & 0xfff
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> CountOutWriteVal {
            CountOutWriteVal(self.0)
        }
    }
    impl From<u32> for CountOutReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountOutReadVal> for u32 {
        #[inline(always)]
        fn from(val: CountOutReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct CountOutWriteVal(pub u32);
    impl CountOutWriteVal {
        #[doc = "Count the OUT transactions for which the USB device acknowledged the OUT packet\nand dropped it internally, which is the correct response to a packet transmitted\nwith an incorrect Data Toggle.\n\nThe expectation is that this packet is a retry of the previous packet transmission\nand that the handshake response was not received intact by the USB host, indicating\nunreliable communications.\n\nOther causes of Data Toggle synchronization failure may result in data loss."]
        #[inline(always)]
        pub const fn datatog_out(self, val: bool) -> Self {
            Self((self.0 & !(1 << 12)) | (val as u32) << 12)
        }
        #[doc = "Count the SETUP/OUT packets ignored, dropped or NAKed because the RX FIFO was full.\nSETUP packets have been ignored, Isochronous OUT packets have been dropped, and\nnon-Isochronous OUT packets have been NAKed."]
        #[inline(always)]
        pub const fn drop_rx(self, val: bool) -> Self {
            Self((self.0 & !(1 << 13)) | (val as u32) << 13)
        }
        #[doc = "Count the OUT packets that could not be accepted because there was no buffer in the\nAv OUT FIFO. Non-Isochronous OUT packets have been NAKed.\nIsochronous OUT packets were ignored."]
        #[inline(always)]
        pub const fn drop_avout(self, val: bool) -> Self {
            Self((self.0 & !(1 << 14)) | (val as u32) << 14)
        }
        #[doc = "Count the SETUP packets that were ignored because there was no buffer in the\nAv SETUP FIFO."]
        #[inline(always)]
        pub const fn ign_avsetup(self, val: bool) -> Self {
            Self((self.0 & !(1 << 15)) | (val as u32) << 15)
        }
        #[doc = "Set of OUT endpoints for which this counter is enabled."]
        #[inline(always)]
        pub const fn endpoints(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 16)) | ((val & 0xfff) << 16))
        }
        #[doc = "Write 1 to reset the counter."]
        #[inline(always)]
        pub const fn rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 31)) | (val as u32) << 31)
        }
    }
    impl From<u32> for CountOutWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<CountOutWriteVal> for u32 {
        #[inline(always)]
        fn from(val: CountOutWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct EpInEnable0ReadVal(pub u32);
    impl EpInEnable0ReadVal {
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> EpInEnable0WriteVal {
            EpInEnable0WriteVal(self.0)
        }
    }
    impl From<u32> for EpInEnable0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<EpInEnable0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: EpInEnable0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct EpInEnable0WriteVal(pub u32);
    impl EpInEnable0WriteVal {
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "This bit must be set to enable upstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear then any IN packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for EpInEnable0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<EpInEnable0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: EpInEnable0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct EpOutEnable0ReadVal(pub u32);
    impl EpOutEnable0ReadVal {
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> EpOutEnable0WriteVal {
            EpOutEnable0WriteVal(self.0)
        }
    }
    impl From<u32> for EpOutEnable0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<EpOutEnable0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: EpOutEnable0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct EpOutEnable0WriteVal(pub u32);
    impl EpOutEnable0WriteVal {
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "This bit must be set to enable downstream transactions to be received on the endpoint and elicit responses.\nIf the bit is clear, any SETUP or OUT packets sent to the endpoint will be ignored."]
        #[inline(always)]
        pub const fn enable11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for EpOutEnable0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<EpOutEnable0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: EpOutEnable0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct FifoCtrlWriteVal(pub u32);
    impl FifoCtrlWriteVal {
        #[doc = "Software reset of the Available OUT Buffer FIFO. This must be used only when the USB device\nis not connected to the USB."]
        #[inline(always)]
        pub const fn avout_rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "Software reset of the Available SETUP Buffer FIFO. This must be used only when the USB device\nis not connected to the USB."]
        #[inline(always)]
        pub const fn avsetup_rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "Software reset the of Rx Buffer FIFO. This must be used only when the USB device is not\nconnected to the USB."]
        #[inline(always)]
        pub const fn rx_rst(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
    }
    impl From<u32> for FifoCtrlWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<FifoCtrlWriteVal> for u32 {
        #[inline(always)]
        fn from(val: FifoCtrlWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InDataToggleReadVal(pub u32);
    impl InDataToggleReadVal {
        #[doc = "Reading returns the current state of the IN endpoint Data Toggle flags.\nWriting sets the Data Toggle flag for each endpoint if the corresponding mask bit\nin the upper half of this register is set."]
        #[inline(always)]
        pub const fn status(&self) -> u32 {
            (self.0 >> 0) & 0xfff
        }
        #[doc = "Reads as zero.\nWhen writing, a set bit will cause the Data Toggle flag of the corresponding\nIN endpoint to be updated. A clear bit will leave the flag for the corresponding\nendpoint unchanged."]
        #[inline(always)]
        pub const fn mask(&self) -> u32 {
            (self.0 >> 16) & 0xfff
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> InDataToggleWriteVal {
            InDataToggleWriteVal(self.0)
        }
    }
    impl From<u32> for InDataToggleReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InDataToggleReadVal> for u32 {
        #[inline(always)]
        fn from(val: InDataToggleReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InDataToggleWriteVal(pub u32);
    impl InDataToggleWriteVal {
        #[doc = "Reading returns the current state of the IN endpoint Data Toggle flags.\nWriting sets the Data Toggle flag for each endpoint if the corresponding mask bit\nin the upper half of this register is set."]
        #[inline(always)]
        pub const fn status(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 0)) | ((val & 0xfff) << 0))
        }
        #[doc = "Reads as zero.\nWhen writing, a set bit will cause the Data Toggle flag of the corresponding\nIN endpoint to be updated. A clear bit will leave the flag for the corresponding\nendpoint unchanged."]
        #[inline(always)]
        pub const fn mask(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 16)) | ((val & 0xfff) << 16))
        }
    }
    impl From<u32> for InDataToggleWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InDataToggleWriteVal> for u32 {
        #[inline(always)]
        fn from(val: InDataToggleWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InIso0ReadVal(pub u32);
    impl InIso0ReadVal {
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> InIso0WriteVal {
            InIso0WriteVal(self.0)
        }
    }
    impl From<u32> for InIso0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InIso0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: InIso0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InIso0WriteVal(pub u32);
    impl InIso0WriteVal {
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be expected for an IN transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for InIso0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InIso0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: InIso0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InSent0ReadVal(pub u32);
    impl InSent0ReadVal {
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> InSent0WriteVal {
            InSent0WriteVal(self.0)
        }
    }
    impl From<u32> for InSent0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InSent0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: InSent0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InSent0WriteVal(pub u32);
    impl InSent0WriteVal {
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent0_clear(self) -> Self {
            Self(self.0 | (1 << 0))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent1_clear(self) -> Self {
            Self(self.0 | (1 << 1))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent2_clear(self) -> Self {
            Self(self.0 | (1 << 2))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent3_clear(self) -> Self {
            Self(self.0 | (1 << 3))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent4_clear(self) -> Self {
            Self(self.0 | (1 << 4))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent5_clear(self) -> Self {
            Self(self.0 | (1 << 5))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent6_clear(self) -> Self {
            Self(self.0 | (1 << 6))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent7_clear(self) -> Self {
            Self(self.0 | (1 << 7))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent8_clear(self) -> Self {
            Self(self.0 | (1 << 8))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent9_clear(self) -> Self {
            Self(self.0 | (1 << 9))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent10_clear(self) -> Self {
            Self(self.0 | (1 << 10))
        }
        #[doc = "This bit will be set when the ACK is received from\nthe host to indicate successful packet delivery\nas part of an IN transaction."]
        #[inline(always)]
        pub const fn sent11_clear(self) -> Self {
            Self(self.0 | (1 << 11))
        }
    }
    impl From<u32> for InSent0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InSent0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: InSent0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InStall0ReadVal(pub u32);
    impl InStall0ReadVal {
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> InStall0WriteVal {
            InStall0WriteVal(self.0)
        }
    }
    impl From<u32> for InStall0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InStall0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: InStall0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct InStall0WriteVal(pub u32);
    impl InStall0WriteVal {
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "If this bit is set then an IN transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for InStall0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<InStall0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: InStall0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct OutDataToggleReadVal(pub u32);
    impl OutDataToggleReadVal {
        #[doc = "Reading returns the current state of the OUT endpoint Data Toggle flags.\nWriting sets the Data Toggle flag for each endpoint if the corresponding mask bit\nin the upper half of this register is set."]
        #[inline(always)]
        pub const fn status(&self) -> u32 {
            (self.0 >> 0) & 0xfff
        }
        #[doc = "Reads as zero.\nWhen writing, a set bit will cause the Data Toggle flag of the corresponding\nOUT endpoint to be updated. A clear bit will leave the flag for the corresponding\nendpoint unchanged."]
        #[inline(always)]
        pub const fn mask(&self) -> u32 {
            (self.0 >> 16) & 0xfff
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> OutDataToggleWriteVal {
            OutDataToggleWriteVal(self.0)
        }
    }
    impl From<u32> for OutDataToggleReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<OutDataToggleReadVal> for u32 {
        #[inline(always)]
        fn from(val: OutDataToggleReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct OutDataToggleWriteVal(pub u32);
    impl OutDataToggleWriteVal {
        #[doc = "Reading returns the current state of the OUT endpoint Data Toggle flags.\nWriting sets the Data Toggle flag for each endpoint if the corresponding mask bit\nin the upper half of this register is set."]
        #[inline(always)]
        pub const fn status(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 0)) | ((val & 0xfff) << 0))
        }
        #[doc = "Reads as zero.\nWhen writing, a set bit will cause the Data Toggle flag of the corresponding\nOUT endpoint to be updated. A clear bit will leave the flag for the corresponding\nendpoint unchanged."]
        #[inline(always)]
        pub const fn mask(self, val: u32) -> Self {
            Self((self.0 & !(0xfff << 16)) | ((val & 0xfff) << 16))
        }
    }
    impl From<u32> for OutDataToggleWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<OutDataToggleWriteVal> for u32 {
        #[inline(always)]
        fn from(val: OutDataToggleWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct OutIso0ReadVal(pub u32);
    impl OutIso0ReadVal {
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> OutIso0WriteVal {
            OutIso0WriteVal(self.0)
        }
    }
    impl From<u32> for OutIso0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<OutIso0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: OutIso0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct OutIso0WriteVal(pub u32);
    impl OutIso0WriteVal {
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "If this bit is set then the endpoint will be treated as an isochronous endpoint.\nNo handshake packet will be sent for an OUT transaction.\nNote that if a rxenable_setup is set for this endpoint's number, this bit will not take effect.\nControl endpoint configuration trumps isochronous endpoint configuration."]
        #[inline(always)]
        pub const fn iso11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for OutIso0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<OutIso0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: OutIso0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct OutStall0ReadVal(pub u32);
    impl OutStall0ReadVal {
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> OutStall0WriteVal {
            OutStall0WriteVal(self.0)
        }
    }
    impl From<u32> for OutStall0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<OutStall0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: OutStall0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct OutStall0WriteVal(pub u32);
    impl OutStall0WriteVal {
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "If this bit is set then an OUT transaction to this endpoint will elicit a STALL handshake, when a non-isochronous endpoint is enabled.\nIf the configuration has both STALL and NAK enabled, the STALL handshake will take priority.\n\nNote that SETUP transactions are always either accepted or ignored.\nFor endpoints that accept SETUP transactions, a SETUP packet will clear the STALL flag on endpoints for both the IN and OUT directions."]
        #[inline(always)]
        pub const fn endpoint11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for OutStall0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<OutStall0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: OutStall0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct PhyConfigReadVal(pub u32);
    impl PhyConfigReadVal {
        #[doc = "Detect received K and J symbols from the usb_rx_d signal, which must be driven from an external differential receiver.\nIf 1, make use of the usb_rx_d input.\nIf 0, the usb_rx_d input is ignored and the usb_rx_dp and usb_rx_dn pair are used to detect K and J (useful for some environments, but will be unlikely to pass full USB compliance).\nRegardless of the state of this field usb_rx_dp and usb_rx_dn are always used to detect SE0.\nThis bit also feeds the rx_enable pin, activating the receiver when the device is not suspended."]
        #[inline(always)]
        pub const fn use_diff_rcvr(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "If 1, select the d and se0 TX interface.\nIf 0, select the dp and dn TX interface.\nThis directly controls the output pin of the same name.\nIt is intended to be used to enable the use of a variety of external transceivers, to select an encoding that matches the transceiver."]
        #[inline(always)]
        pub const fn tx_use_d_se0(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "Recognize a single SE0 bit as an end of packet, otherwise two successive bits are required."]
        #[inline(always)]
        pub const fn eop_single_bit(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "Flip the D+/D- pins.\nParticularly useful if D+/D- are mapped to SBU1/SBU2 pins of USB-C.\n"]
        #[inline(always)]
        pub const fn pinflip(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "0: Enable reference signal generation for clock synchronization, 1: disable it by forcing the associated signals to zero.\n"]
        #[inline(always)]
        pub const fn usb_ref_disable(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "Disable (0) or enable (1) oscillator test mode.\nIf enabled, the device constantly transmits a J/K pattern, which is useful for testing the USB clock.\nNote that while in oscillator test mode, the device no longer receives SOFs and consequently does not generate the reference signal for clock synchronization.\nThe clock might drift off.\n"]
        #[inline(always)]
        pub const fn tx_osc_test_mode(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> PhyConfigWriteVal {
            PhyConfigWriteVal(self.0)
        }
    }
    impl From<u32> for PhyConfigReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<PhyConfigReadVal> for u32 {
        #[inline(always)]
        fn from(val: PhyConfigReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct PhyConfigWriteVal(pub u32);
    impl PhyConfigWriteVal {
        #[doc = "Detect received K and J symbols from the usb_rx_d signal, which must be driven from an external differential receiver.\nIf 1, make use of the usb_rx_d input.\nIf 0, the usb_rx_d input is ignored and the usb_rx_dp and usb_rx_dn pair are used to detect K and J (useful for some environments, but will be unlikely to pass full USB compliance).\nRegardless of the state of this field usb_rx_dp and usb_rx_dn are always used to detect SE0.\nThis bit also feeds the rx_enable pin, activating the receiver when the device is not suspended."]
        #[inline(always)]
        pub const fn use_diff_rcvr(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "If 1, select the d and se0 TX interface.\nIf 0, select the dp and dn TX interface.\nThis directly controls the output pin of the same name.\nIt is intended to be used to enable the use of a variety of external transceivers, to select an encoding that matches the transceiver."]
        #[inline(always)]
        pub const fn tx_use_d_se0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "Recognize a single SE0 bit as an end of packet, otherwise two successive bits are required."]
        #[inline(always)]
        pub const fn eop_single_bit(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "Flip the D+/D- pins.\nParticularly useful if D+/D- are mapped to SBU1/SBU2 pins of USB-C.\n"]
        #[inline(always)]
        pub const fn pinflip(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "0: Enable reference signal generation for clock synchronization, 1: disable it by forcing the associated signals to zero.\n"]
        #[inline(always)]
        pub const fn usb_ref_disable(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "Disable (0) or enable (1) oscillator test mode.\nIf enabled, the device constantly transmits a J/K pattern, which is useful for testing the USB clock.\nNote that while in oscillator test mode, the device no longer receives SOFs and consequently does not generate the reference signal for clock synchronization.\nThe clock might drift off.\n"]
        #[inline(always)]
        pub const fn tx_osc_test_mode(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
    }
    impl From<u32> for PhyConfigWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<PhyConfigWriteVal> for u32 {
        #[inline(always)]
        fn from(val: PhyConfigWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct PhyPinsDriveReadVal(pub u32);
    impl PhyPinsDriveReadVal {
        #[doc = "USB transmit D+ output, used with dn_o."]
        #[inline(always)]
        pub const fn dp_o(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "USB transmit D- output, used with dp_o."]
        #[inline(always)]
        pub const fn dn_o(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "USB transmit data output, encoding K and J when se0_o is 0."]
        #[inline(always)]
        pub const fn d_o(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "USB single-ended zero output."]
        #[inline(always)]
        pub const fn se0_o(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "USB OE output."]
        #[inline(always)]
        pub const fn oe_o(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "Enable differential receiver."]
        #[inline(always)]
        pub const fn rx_enable_o(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "USB D+ pullup enable output."]
        #[inline(always)]
        pub const fn dp_pullup_en_o(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "USB D- pullup enable output."]
        #[inline(always)]
        pub const fn dn_pullup_en_o(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "0: Outputs are controlled by the hardware block.\n1: Outputs are controlled with this register."]
        #[inline(always)]
        pub const fn en(&self) -> bool {
            ((self.0 >> 16) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> PhyPinsDriveWriteVal {
            PhyPinsDriveWriteVal(self.0)
        }
    }
    impl From<u32> for PhyPinsDriveReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<PhyPinsDriveReadVal> for u32 {
        #[inline(always)]
        fn from(val: PhyPinsDriveReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct PhyPinsDriveWriteVal(pub u32);
    impl PhyPinsDriveWriteVal {
        #[doc = "USB transmit D+ output, used with dn_o."]
        #[inline(always)]
        pub const fn dp_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "USB transmit D- output, used with dp_o."]
        #[inline(always)]
        pub const fn dn_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "USB transmit data output, encoding K and J when se0_o is 0."]
        #[inline(always)]
        pub const fn d_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "USB single-ended zero output."]
        #[inline(always)]
        pub const fn se0_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "USB OE output."]
        #[inline(always)]
        pub const fn oe_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "Enable differential receiver."]
        #[inline(always)]
        pub const fn rx_enable_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "USB D+ pullup enable output."]
        #[inline(always)]
        pub const fn dp_pullup_en_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "USB D- pullup enable output."]
        #[inline(always)]
        pub const fn dn_pullup_en_o(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "0: Outputs are controlled by the hardware block.\n1: Outputs are controlled with this register."]
        #[inline(always)]
        pub const fn en(self, val: bool) -> Self {
            Self((self.0 & !(1 << 16)) | (val as u32) << 16)
        }
    }
    impl From<u32> for PhyPinsDriveWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<PhyPinsDriveWriteVal> for u32 {
        #[inline(always)]
        fn from(val: PhyPinsDriveWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct PhyPinsSenseReadVal(pub u32);
    impl PhyPinsSenseReadVal {
        #[doc = "USB D+ input."]
        #[inline(always)]
        pub const fn rx_dp_i(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "USB D- input."]
        #[inline(always)]
        pub const fn rx_dn_i(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "USB data input from an external differential receiver, if available."]
        #[inline(always)]
        pub const fn rx_d_i(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "USB transmit D+ output (readback)."]
        #[inline(always)]
        pub const fn tx_dp_o(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "USB transmit D- output (readback)."]
        #[inline(always)]
        pub const fn tx_dn_o(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "USB transmit data value (readback)."]
        #[inline(always)]
        pub const fn tx_d_o(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "USB single-ended zero output (readback)."]
        #[inline(always)]
        pub const fn tx_se0_o(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = "USB OE output (readback)."]
        #[inline(always)]
        pub const fn tx_oe_o(&self) -> bool {
            ((self.0 >> 12) & 1) != 0
        }
        #[doc = "USB power sense signal."]
        #[inline(always)]
        pub const fn pwr_sense(&self) -> bool {
            ((self.0 >> 16) & 1) != 0
        }
    }
    impl From<u32> for PhyPinsSenseReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<PhyPinsSenseReadVal> for u32 {
        #[inline(always)]
        fn from(val: PhyPinsSenseReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct RxenableOut0ReadVal(pub u32);
    impl RxenableOut0ReadVal {
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> RxenableOut0WriteVal {
            RxenableOut0WriteVal(self.0)
        }
    }
    impl From<u32> for RxenableOut0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<RxenableOut0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: RxenableOut0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct RxenableOut0WriteVal(pub u32);
    impl RxenableOut0WriteVal {
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "This bit must be set to enable OUT transactions to be received on the endpoint.\nIf the bit is clear then an OUT request will be responded to with a NAK, if the endpoint is enabled.\nIf set_nak_out for this endpoint is set, hardware will clear this bit whenever an OUT transaction is received on this endpoint.\nSoftware must set this bit again to receive the next OUT transaction.\nUntil that happens, hardware will continue to NAK any OUT transaction to this endpoint."]
        #[inline(always)]
        pub const fn out11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for RxenableOut0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<RxenableOut0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: RxenableOut0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct RxenableSetup0ReadVal(pub u32);
    impl RxenableSetup0ReadVal {
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> RxenableSetup0WriteVal {
            RxenableSetup0WriteVal(self.0)
        }
    }
    impl From<u32> for RxenableSetup0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<RxenableSetup0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: RxenableSetup0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct RxenableSetup0WriteVal(pub u32);
    impl RxenableSetup0WriteVal {
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "This bit must be set to enable SETUP transactions to be\nreceived on the endpoint. If the bit is clear then a\nSETUP packet will be ignored. The bit should be set for\ncontrol endpoints (and only control endpoints)."]
        #[inline(always)]
        pub const fn setup11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for RxenableSetup0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<RxenableSetup0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: RxenableSetup0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct RxfifoReadVal(pub u32);
    impl RxfifoReadVal {
        #[doc = "This field contains the buffer ID that data was received into.\nOn read the buffer ID is popped from the Received Buffer FIFO and returned to software."]
        #[inline(always)]
        pub const fn buffer(&self) -> u32 {
            (self.0 >> 0) & 0x1f
        }
        #[doc = "This field contains the data length in bytes of the packet written to the buffer."]
        #[inline(always)]
        pub const fn size(&self) -> u32 {
            (self.0 >> 8) & 0x7f
        }
        #[doc = "This bit indicates if the received transaction is of type SETUP (1) or OUT (0)."]
        #[inline(always)]
        pub const fn setup(&self) -> bool {
            ((self.0 >> 19) & 1) != 0
        }
        #[doc = "This field contains the endpoint ID to which the packet was directed."]
        #[inline(always)]
        pub const fn ep(&self) -> u32 {
            (self.0 >> 20) & 0xf
        }
    }
    impl From<u32> for RxfifoReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<RxfifoReadVal> for u32 {
        #[inline(always)]
        fn from(val: RxfifoReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct SetNakOut0ReadVal(pub u32);
    impl SetNakOut0ReadVal {
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable0(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable1(&self) -> bool {
            ((self.0 >> 1) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable2(&self) -> bool {
            ((self.0 >> 2) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable3(&self) -> bool {
            ((self.0 >> 3) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable4(&self) -> bool {
            ((self.0 >> 4) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable5(&self) -> bool {
            ((self.0 >> 5) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable6(&self) -> bool {
            ((self.0 >> 6) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable7(&self) -> bool {
            ((self.0 >> 7) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable8(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable9(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable10(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable11(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> SetNakOut0WriteVal {
            SetNakOut0WriteVal(self.0)
        }
    }
    impl From<u32> for SetNakOut0ReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<SetNakOut0ReadVal> for u32 {
        #[inline(always)]
        fn from(val: SetNakOut0ReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct SetNakOut0WriteVal(pub u32);
    impl SetNakOut0WriteVal {
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable0(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable1(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable2(self, val: bool) -> Self {
            Self((self.0 & !(1 << 2)) | (val as u32) << 2)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable3(self, val: bool) -> Self {
            Self((self.0 & !(1 << 3)) | (val as u32) << 3)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable4(self, val: bool) -> Self {
            Self((self.0 & !(1 << 4)) | (val as u32) << 4)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable5(self, val: bool) -> Self {
            Self((self.0 & !(1 << 5)) | (val as u32) << 5)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable6(self, val: bool) -> Self {
            Self((self.0 & !(1 << 6)) | (val as u32) << 6)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable7(self, val: bool) -> Self {
            Self((self.0 & !(1 << 7)) | (val as u32) << 7)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable8(self, val: bool) -> Self {
            Self((self.0 & !(1 << 8)) | (val as u32) << 8)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable9(self, val: bool) -> Self {
            Self((self.0 & !(1 << 9)) | (val as u32) << 9)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable10(self, val: bool) -> Self {
            Self((self.0 & !(1 << 10)) | (val as u32) << 10)
        }
        #[doc = "When this bit is set, hardware will clear this endpoint's rxenable_out bit whenever an OUT transaction is received on this endpoint.\nThis bit should not be changed while the endpoint is active."]
        #[inline(always)]
        pub const fn enable11(self, val: bool) -> Self {
            Self((self.0 & !(1 << 11)) | (val as u32) << 11)
        }
    }
    impl From<u32> for SetNakOut0WriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<SetNakOut0WriteVal> for u32 {
        #[inline(always)]
        fn from(val: SetNakOut0WriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct UsbctrlReadVal(pub u32);
    impl UsbctrlReadVal {
        #[doc = "Set to connect the USB interface (i.e. assert the pullup)."]
        #[inline(always)]
        pub const fn enable(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "Device address set by host (this should be copied from\nthe Set Device ID SETUP packet).\n\nThis will be zeroed by the hardware when the link resets."]
        #[inline(always)]
        pub const fn device_address(&self) -> u32 {
            (self.0 >> 16) & 0x7f
        }
        #[doc = r" Construct a WriteVal that can be used to modify the contents of this register value."]
        #[inline(always)]
        pub fn modify(self) -> UsbctrlWriteVal {
            UsbctrlWriteVal(self.0)
        }
    }
    impl From<u32> for UsbctrlReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<UsbctrlReadVal> for u32 {
        #[inline(always)]
        fn from(val: UsbctrlReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct UsbctrlWriteVal(pub u32);
    impl UsbctrlWriteVal {
        #[doc = "Set to connect the USB interface (i.e. assert the pullup)."]
        #[inline(always)]
        pub const fn enable(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "Write a 1 to this bit to instruct usbdev to jump to the LinkResuming state.\nThe write will only have an effect when the device is in the LinkPowered state.\nIts intention is to handle a resume-from-suspend event after the IP has been powered down."]
        #[inline(always)]
        pub const fn resume_link_active(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
        #[doc = "Device address set by host (this should be copied from\nthe Set Device ID SETUP packet).\n\nThis will be zeroed by the hardware when the link resets."]
        #[inline(always)]
        pub const fn device_address(self, val: u32) -> Self {
            Self((self.0 & !(0x7f << 16)) | ((val & 0x7f) << 16))
        }
    }
    impl From<u32> for UsbctrlWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<UsbctrlWriteVal> for u32 {
        #[inline(always)]
        fn from(val: UsbctrlWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct UsbstatReadVal(pub u32);
    impl UsbstatReadVal {
        #[doc = "Frame index received from host. On an active link, this will increment every milisecond."]
        #[inline(always)]
        pub const fn frame(&self) -> u32 {
            (self.0 >> 0) & 0x7ff
        }
        #[doc = "Start of frame not received from host for 4.096 ms and the line is active."]
        #[inline(always)]
        pub const fn host_lost(&self) -> bool {
            ((self.0 >> 11) & 1) != 0
        }
        #[doc = "State of USB link, decoded from line."]
        #[inline(always)]
        pub const fn link_state(&self) -> super::enums::LinkState {
            super::enums::LinkState::from_raw((self.0 >> 12) & 7).unwrap()
        }
        #[doc = "Reflects the state of the sense pin.\n1 indicates that the host is providing VBUS.\nNote that this bit always shows the state of the actual pin and does not take account of the override control."]
        #[inline(always)]
        pub const fn sense(&self) -> bool {
            ((self.0 >> 15) & 1) != 0
        }
        #[doc = "Number of buffers in the Available OUT Buffer FIFO.\n\nThese buffers are available for receiving OUT DATA packets."]
        #[inline(always)]
        pub const fn av_out_depth(&self) -> u32 {
            (self.0 >> 16) & 0xf
        }
        #[doc = "Number of buffers in the Available SETUP Buffer FIFO.\n\nThese buffers are available for receiving SETUP DATA packets."]
        #[inline(always)]
        pub const fn av_setup_depth(&self) -> u32 {
            (self.0 >> 20) & 7
        }
        #[doc = "Available OUT Buffer FIFO is full."]
        #[inline(always)]
        pub const fn av_out_full(&self) -> bool {
            ((self.0 >> 23) & 1) != 0
        }
        #[doc = "Number of buffers in the Received Buffer FIFO.\n\nThese buffers have packets that have been received and\nshould be popped from the FIFO and processed."]
        #[inline(always)]
        pub const fn rx_depth(&self) -> u32 {
            (self.0 >> 24) & 0xf
        }
        #[doc = "Available SETUP Buffer FIFO is full."]
        #[inline(always)]
        pub const fn av_setup_full(&self) -> bool {
            ((self.0 >> 30) & 1) != 0
        }
        #[doc = "Received Buffer FIFO is empty."]
        #[inline(always)]
        pub const fn rx_empty(&self) -> bool {
            ((self.0 >> 31) & 1) != 0
        }
    }
    impl From<u32> for UsbstatReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<UsbstatReadVal> for u32 {
        #[inline(always)]
        fn from(val: UsbstatReadVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct WakeControlWriteVal(pub u32);
    impl WakeControlWriteVal {
        #[doc = "Suspend request to the wake detection module.\n\nTrigger the wake detection module to begin monitoring for wake-from-suspend events.\nWhen written with a 1, the wake detection module will activate.\nActivation may not happen immediately, and its status can be verified by checking wake_events.module_active."]
        #[inline(always)]
        pub const fn suspend_req(self, val: bool) -> Self {
            Self((self.0 & !(1 << 0)) | (val as u32) << 0)
        }
        #[doc = "Wake acknowledgement.\n\nSignal to the wake detection module that it may release control of the pull-ups back to the main block and return to an inactive state.\nThe release back to normal state may not happen immediately.\nThe status can be confirmed via wake_events.module_active.\n\nNote that this bit can also be used without powering down, such as when usbdev detects resume signaling before transitions to low power states have begun."]
        #[inline(always)]
        pub const fn wake_ack(self, val: bool) -> Self {
            Self((self.0 & !(1 << 1)) | (val as u32) << 1)
        }
    }
    impl From<u32> for WakeControlWriteVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<WakeControlWriteVal> for u32 {
        #[inline(always)]
        fn from(val: WakeControlWriteVal) -> u32 {
            val.0
        }
    }
    #[derive(Clone, Copy)]
    pub struct WakeEventsReadVal(pub u32);
    impl WakeEventsReadVal {
        #[doc = "USB aon wake module is active, monitoring events and controlling the pull-ups."]
        #[inline(always)]
        pub const fn module_active(&self) -> bool {
            ((self.0 >> 0) & 1) != 0
        }
        #[doc = "USB aon wake module detected VBUS was interrupted while monitoring events."]
        #[inline(always)]
        pub const fn disconnected(&self) -> bool {
            ((self.0 >> 8) & 1) != 0
        }
        #[doc = "USB aon wake module detected a bus reset while monitoring events."]
        #[inline(always)]
        pub const fn bus_reset(&self) -> bool {
            ((self.0 >> 9) & 1) != 0
        }
        #[doc = "USB aon wake module detected a non-idle bus while monitoring events."]
        #[inline(always)]
        pub const fn bus_not_idle(&self) -> bool {
            ((self.0 >> 10) & 1) != 0
        }
    }
    impl From<u32> for WakeEventsReadVal {
        #[inline(always)]
        fn from(val: u32) -> Self {
            Self(val)
        }
    }
    impl From<WakeEventsReadVal> for u32 {
        #[inline(always)]
        fn from(val: WakeEventsReadVal) -> u32 {
            val.0
        }
    }
}
pub mod enums {
    #![doc = r" Enumerations used by some register fields."]
    #[derive(Clone, Copy, Eq, PartialEq)]
    #[repr(u32)]
    pub enum LinkState {
        Disconnected = 0,
        Powered = 1,
        PoweredSuspended = 2,
        Active = 3,
        Suspended = 4,
        ActiveNosof = 5,
        Resuming = 6,
        Reserved7 = 7,
    }
    impl LinkState {
        #[inline(always)]
        pub fn disconnected(&self) -> bool {
            *self == Self::Disconnected
        }
        #[inline(always)]
        pub fn powered(&self) -> bool {
            *self == Self::Powered
        }
        #[inline(always)]
        pub fn powered_suspended(&self) -> bool {
            *self == Self::PoweredSuspended
        }
        #[inline(always)]
        pub fn active(&self) -> bool {
            *self == Self::Active
        }
        #[inline(always)]
        pub fn suspended(&self) -> bool {
            *self == Self::Suspended
        }
        #[inline(always)]
        pub fn active_nosof(&self) -> bool {
            *self == Self::ActiveNosof
        }
        #[inline(always)]
        pub fn resuming(&self) -> bool {
            *self == Self::Resuming
        }
        pub const fn from_raw(val: u32) -> Option<LinkState> {
            if val < 8 {
                Some(unsafe { core::mem::transmute::<u32, LinkState>(val) })
            } else {
                None
            }
        }
    }
    impl TryFrom<u32> for LinkState {
        type Error = ();
        #[inline(always)]
        fn try_from(val: u32) -> Result<LinkState, ()> {
            LinkState::from_raw(val).ok_or(())
        }
    }
    impl From<LinkState> for u32 {
        fn from(val: LinkState) -> Self {
            val as u32
        }
    }
    pub mod selector {
        pub struct LinkStateSelector();
        impl LinkStateSelector {
            #[inline(always)]
            pub fn disconnected(&self) -> super::LinkState {
                super::LinkState::Disconnected
            }
            #[inline(always)]
            pub fn powered(&self) -> super::LinkState {
                super::LinkState::Powered
            }
            #[inline(always)]
            pub fn powered_suspended(&self) -> super::LinkState {
                super::LinkState::PoweredSuspended
            }
            #[inline(always)]
            pub fn active(&self) -> super::LinkState {
                super::LinkState::Active
            }
            #[inline(always)]
            pub fn suspended(&self) -> super::LinkState {
                super::LinkState::Suspended
            }
            #[inline(always)]
            pub fn active_nosof(&self) -> super::LinkState {
                super::LinkState::ActiveNosof
            }
            #[inline(always)]
            pub fn resuming(&self) -> super::LinkState {
                super::LinkState::Resuming
            }
        }
    }
}
pub mod meta {
    #![doc = r" Additional metadata needed by ureg."]
    pub type IntrState =
        ureg::ReadWriteReg32<0, crate::regs::IntrStateReadVal, crate::regs::IntrStateWriteVal>;
    pub type IntrEnable =
        ureg::ReadWriteReg32<0, crate::regs::IntrEnableReadVal, crate::regs::IntrEnableWriteVal>;
    pub type IntrTest = ureg::WriteOnlyReg32<0, crate::regs::IntrTestWriteVal>;
    pub type AlertTest = ureg::WriteOnlyReg32<0, crate::regs::AlertTestWriteVal>;
    pub type Usbctrl =
        ureg::ReadWriteReg32<0, crate::regs::UsbctrlReadVal, crate::regs::UsbctrlWriteVal>;
    pub type EpOutEnable0 = ureg::ReadWriteReg32<
        0,
        crate::regs::EpOutEnable0ReadVal,
        crate::regs::EpOutEnable0WriteVal,
    >;
    pub type EpInEnable0 =
        ureg::ReadWriteReg32<0, crate::regs::EpInEnable0ReadVal, crate::regs::EpInEnable0WriteVal>;
    pub type Usbstat = ureg::ReadOnlyReg32<crate::regs::UsbstatReadVal>;
    pub type Avoutbuffer = ureg::WriteOnlyReg32<0, crate::regs::AvoutbufferWriteVal>;
    pub type Avsetupbuffer = ureg::WriteOnlyReg32<0, crate::regs::AvsetupbufferWriteVal>;
    pub type Rxfifo = ureg::ReadOnlyReg32<crate::regs::RxfifoReadVal>;
    pub type RxenableSetup0 = ureg::ReadWriteReg32<
        0,
        crate::regs::RxenableSetup0ReadVal,
        crate::regs::RxenableSetup0WriteVal,
    >;
    pub type RxenableOut0 = ureg::ReadWriteReg32<
        0,
        crate::regs::RxenableOut0ReadVal,
        crate::regs::RxenableOut0WriteVal,
    >;
    pub type SetNakOut0 =
        ureg::ReadWriteReg32<0, crate::regs::SetNakOut0ReadVal, crate::regs::SetNakOut0WriteVal>;
    pub type InSent0 =
        ureg::ReadWriteReg32<0, crate::regs::InSent0ReadVal, crate::regs::InSent0WriteVal>;
    pub type OutStall0 =
        ureg::ReadWriteReg32<0, crate::regs::OutStall0ReadVal, crate::regs::OutStall0WriteVal>;
    pub type InStall0 =
        ureg::ReadWriteReg32<0, crate::regs::InStall0ReadVal, crate::regs::InStall0WriteVal>;
    pub type Configin =
        ureg::ReadWriteReg32<0, crate::regs::ConfiginReadVal, crate::regs::ConfiginWriteVal>;
    pub type OutIso0 =
        ureg::ReadWriteReg32<0, crate::regs::OutIso0ReadVal, crate::regs::OutIso0WriteVal>;
    pub type InIso0 =
        ureg::ReadWriteReg32<0, crate::regs::InIso0ReadVal, crate::regs::InIso0WriteVal>;
    pub type OutDataToggle = ureg::ReadWriteReg32<
        0,
        crate::regs::OutDataToggleReadVal,
        crate::regs::OutDataToggleWriteVal,
    >;
    pub type InDataToggle = ureg::ReadWriteReg32<
        0,
        crate::regs::InDataToggleReadVal,
        crate::regs::InDataToggleWriteVal,
    >;
    pub type PhyPinsSense = ureg::ReadOnlyReg32<crate::regs::PhyPinsSenseReadVal>;
    pub type PhyPinsDrive = ureg::ReadWriteReg32<
        0,
        crate::regs::PhyPinsDriveReadVal,
        crate::regs::PhyPinsDriveWriteVal,
    >;
    pub type PhyConfig =
        ureg::ReadWriteReg32<4, crate::regs::PhyConfigReadVal, crate::regs::PhyConfigWriteVal>;
    pub type WakeControl = ureg::WriteOnlyReg32<0, crate::regs::WakeControlWriteVal>;
    pub type WakeEvents = ureg::ReadOnlyReg32<crate::regs::WakeEventsReadVal>;
    pub type FifoCtrl = ureg::WriteOnlyReg32<0, crate::regs::FifoCtrlWriteVal>;
    pub type CountOut =
        ureg::ReadWriteReg32<0, crate::regs::CountOutReadVal, crate::regs::CountOutWriteVal>;
    pub type CountIn =
        ureg::ReadWriteReg32<0, crate::regs::CountInReadVal, crate::regs::CountInWriteVal>;
    pub type CountNodataIn = ureg::ReadWriteReg32<
        0,
        crate::regs::CountNodataInReadVal,
        crate::regs::CountNodataInWriteVal,
    >;
    pub type CountErrors =
        ureg::ReadWriteReg32<0, crate::regs::CountErrorsReadVal, crate::regs::CountErrorsWriteVal>;
    pub type Buffer = ureg::ReadWriteReg32<0, u32, u32>;
}