Official ARM version: v5.6.0 for cm7
diff --git a/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s new file mode 100644 index 0000000..abddc8d --- /dev/null +++ b/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
@@ -0,0 +1,163 @@ +;/**************************************************************************//** +; * @file startup_ARMCM7.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM7 Device +; * @version V5.3.1 +; * @date 09. July 2018 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2018 Arm Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ + + +;<h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +__stack_limit +Stack_Mem SPACE Stack_Size +__initial_sp + + +;<h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Heap_Size EQU 0x00000C00 + + IF Heap_Size != 0 ; Heap is provided + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + ENDIF + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; -14 NMI Handler + DCD HardFault_Handler ; -13 Hard Fault Handler + DCD MemManage_Handler ; -12 MPU Fault Handler + DCD BusFault_Handler ; -11 Bus Fault Handler + DCD UsageFault_Handler ; -10 Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; -5 SVCall Handler + DCD DebugMon_Handler ; -4 Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; -2 PendSV Handler + DCD SysTick_Handler ; -1 SysTick Handler + + ; Interrupts + DCD Interrupt0_Handler ; 0 Interrupt 0 + DCD Interrupt1_Handler ; 1 Interrupt 1 + DCD Interrupt2_Handler ; 2 Interrupt 2 + DCD Interrupt3_Handler ; 3 Interrupt 3 + DCD Interrupt4_Handler ; 4 Interrupt 4 + DCD Interrupt5_Handler ; 5 Interrupt 5 + DCD Interrupt6_Handler ; 6 Interrupt 6 + DCD Interrupt7_Handler ; 7 Interrupt 7 + DCD Interrupt8_Handler ; 8 Interrupt 8 + DCD Interrupt9_Handler ; 9 Interrupt 9 + + SPACE (214 * 4) ; Interrupts 10 .. 224 are left out +__Vectors_End +__Vectors_Size EQU __Vectors_End - __Vectors + + + AREA |.text|, CODE, READONLY + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Macro to define default exception/interrupt handlers. +; Default handler are weak symbols with an endless loop. +; They can be overwritten by real handlers. + MACRO + Set_Default_Handler $Handler_Name +$Handler_Name PROC + EXPORT $Handler_Name [WEAK] + B . + ENDP + MEND + + +; Default exception/interrupt handler + + Set_Default_Handler NMI_Handler + Set_Default_Handler HardFault_Handler + Set_Default_Handler MemManage_Handler + Set_Default_Handler BusFault_Handler + Set_Default_Handler UsageFault_Handler + Set_Default_Handler SVC_Handler + Set_Default_Handler DebugMon_Handler + Set_Default_Handler PendSV_Handler + Set_Default_Handler SysTick_Handler + + Set_Default_Handler Interrupt0_Handler + Set_Default_Handler Interrupt1_Handler + Set_Default_Handler Interrupt2_Handler + Set_Default_Handler Interrupt3_Handler + Set_Default_Handler Interrupt4_Handler + Set_Default_Handler Interrupt5_Handler + Set_Default_Handler Interrupt6_Handler + Set_Default_Handler Interrupt7_Handler + Set_Default_Handler Interrupt8_Handler + Set_Default_Handler Interrupt9_Handler + + ALIGN + + +; User setup Stack & Heap + + EXPORT __stack_limit + EXPORT __initial_sp + IF Heap_Size != 0 ; Heap is provided + EXPORT __heap_base + EXPORT __heap_limit + ENDIF + + END
diff --git a/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c new file mode 100644 index 0000000..69e2a8d --- /dev/null +++ b/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c
@@ -0,0 +1,85 @@ +/**************************************************************************//** + * @file system_ARMCM7.c + * @brief CMSIS Device System Source File for + * ARMCM7 Device + * @version V5.3.1 + * @date 09. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined (ARMCM7) + #include "ARMCM7.h" +#elif defined (ARMCM7_SP) + #include "ARMCM7_SP.h" +#elif defined (ARMCM7_DP) + #include "ARMCM7_DP.h" +#else + #error device not specified! +#endif + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL (50000000UL) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (XTAL / 2U) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */ + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + +#if defined (__FPU_USED) && (__FPU_USED == 1U) + SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */ + (3U << 11U*2U) ); /* enable CP11 Full Access */ +#endif + +#ifdef UNALIGNED_SUPPORT_DISABLE + SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +}