/* ----------------------------------------------------------------------------    
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.    
*    
* $Date:        19. March 2015
* $Revision: 	V.1.4.5
*    
* Project: 	    CMSIS DSP Library    
* Title:		arm_conv_f32.c    
*    
* Description:	Convolution of floating-point sequences.    
*    
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*  
* Redistribution and use in source and binary forms, with or without 
* modification, are permitted provided that the following conditions
* are met:
*   - Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*   - Redistributions in binary form must reproduce the above copyright
*     notice, this list of conditions and the following disclaimer in
*     the documentation and/or other materials provided with the 
*     distribution.
*   - Neither the name of ARM LIMITED nor the names of its contributors
*     may be used to endorse or promote products derived from this
*     software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.  
* -------------------------------------------------------------------------- */

#include "arm_math.h"

/**    
 * @ingroup groupFilters    
 */

/**    
 * @defgroup Conv Convolution    
 *    
 * Convolution is a mathematical operation that operates on two finite length vectors to generate a finite length output vector.    
 * Convolution is similar to correlation and is frequently used in filtering and data analysis.    
 * The CMSIS DSP library contains functions for convolving Q7, Q15, Q31, and floating-point data types.    
 * The library also provides fast versions of the Q15 and Q31 functions on Cortex-M4 and Cortex-M3.    
 *    
 * \par Algorithm    
 * Let <code>a[n]</code> and <code>b[n]</code> be sequences of length <code>srcALen</code> and <code>srcBLen</code> samples respectively.    
 * Then the convolution    
 *    
 * <pre>    
 *                   c[n] = a[n] * b[n]    
 * </pre>    
 *    
 * \par    
 * is defined as    
 * \image html ConvolutionEquation.gif    
 * \par    
 * Note that <code>c[n]</code> is of length <code>srcALen + srcBLen - 1</code> and is defined over the interval <code>n=0, 1, 2, ..., srcALen + srcBLen - 2</code>.    
 * <code>pSrcA</code> points to the first input vector of length <code>srcALen</code> and    
 * <code>pSrcB</code> points to the second input vector of length <code>srcBLen</code>.    
 * The output result is written to <code>pDst</code> and the calling function must allocate <code>srcALen+srcBLen-1</code> words for the result.    
 *    
 * \par    
 * Conceptually, when two signals <code>a[n]</code> and <code>b[n]</code> are convolved,    
 * the signal <code>b[n]</code> slides over <code>a[n]</code>.    
 * For each offset \c n, the overlapping portions of a[n] and b[n] are multiplied and summed together.    
 *    
 * \par    
 * Note that convolution is a commutative operation:    
 *    
 * <pre>    
 *                   a[n] * b[n] = b[n] * a[n].    
 * </pre>    
 *    
 * \par    
 * This means that switching the A and B arguments to the convolution functions has no effect.    
 *    
 * <b>Fixed-Point Behavior</b>    
 *    
 * \par    
 * Convolution requires summing up a large number of intermediate products.    
 * As such, the Q7, Q15, and Q31 functions run a risk of overflow and saturation.    
 * Refer to the function specific documentation below for further details of the particular algorithm used.    
 *
 *
 * <b>Fast Versions</b>
 *
 * \par 
 * Fast versions are supported for Q31 and Q15.  Cycles for Fast versions are less compared to Q31 and Q15 of conv and the design requires
 * the input signals should be scaled down to avoid intermediate overflows.   
 *
 *
 * <b>Opt Versions</b>
 *
 * \par 
 * Opt versions are supported for Q15 and Q7.  Design uses internal scratch buffer for getting good optimisation.
 * These versions are optimised in cycles and consumes more memory(Scratch memory) compared to Q15 and Q7 versions 
 */

/**    
 * @addtogroup Conv    
 * @{    
 */

/**    
 * @brief Convolution of floating-point sequences.    
 * @param[in] *pSrcA points to the first input sequence.    
 * @param[in] srcALen length of the first input sequence.    
 * @param[in] *pSrcB points to the second input sequence.    
 * @param[in] srcBLen length of the second input sequence.    
 * @param[out] *pDst points to the location where the output result is written.  Length srcALen+srcBLen-1.    
 * @return none.    
 */

void arm_conv_f32(
  float32_t * pSrcA,
  uint32_t srcALen,
  float32_t * pSrcB,
  uint32_t srcBLen,
  float32_t * pDst)
{


#ifndef ARM_MATH_CM0_FAMILY

  /* Run the below code for Cortex-M4 and Cortex-M3 */

  float32_t *pIn1;                               /* inputA pointer */
  float32_t *pIn2;                               /* inputB pointer */
  float32_t *pOut = pDst;                        /* output pointer */
  float32_t *px;                                 /* Intermediate inputA pointer */
  float32_t *py;                                 /* Intermediate inputB pointer */
  float32_t *pSrc1, *pSrc2;                      /* Intermediate pointers */
  float32_t sum, acc0, acc1, acc2, acc3;         /* Accumulator */
  float32_t x0, x1, x2, x3, c0;                  /* Temporary variables to hold state and coefficient values */
  uint32_t j, k, count, blkCnt, blockSize1, blockSize2, blockSize3;     /* loop counters */

  /* The algorithm implementation is based on the lengths of the inputs. */
  /* srcB is always made to slide across srcA. */
  /* So srcBLen is always considered as shorter or equal to srcALen */
  if(srcALen >= srcBLen)
  {
    /* Initialization of inputA pointer */
    pIn1 = pSrcA;

    /* Initialization of inputB pointer */
    pIn2 = pSrcB;
  }
  else
  {
    /* Initialization of inputA pointer */
    pIn1 = pSrcB;

    /* Initialization of inputB pointer */
    pIn2 = pSrcA;

    /* srcBLen is always considered as shorter or equal to srcALen */
    j = srcBLen;
    srcBLen = srcALen;
    srcALen = j;
  }

  /* conv(x,y) at n = x[n] * y[0] + x[n-1] * y[1] + x[n-2] * y[2] + ...+ x[n-N+1] * y[N -1] */
  /* The function is internally    
   * divided into three stages according to the number of multiplications that has to be    
   * taken place between inputA samples and inputB samples. In the first stage of the    
   * algorithm, the multiplications increase by one for every iteration.    
   * In the second stage of the algorithm, srcBLen number of multiplications are done.    
   * In the third stage of the algorithm, the multiplications decrease by one    
   * for every iteration. */

  /* The algorithm is implemented in three stages.    
     The loop counters of each stage is initiated here. */
  blockSize1 = srcBLen - 1u;
  blockSize2 = srcALen - (srcBLen - 1u);
  blockSize3 = blockSize1;

  /* --------------------------    
   * initializations of stage1    
   * -------------------------*/

  /* sum = x[0] * y[0]    
   * sum = x[0] * y[1] + x[1] * y[0]    
   * ....    
   * sum = x[0] * y[srcBlen - 1] + x[1] * y[srcBlen - 2] +...+ x[srcBLen - 1] * y[0]    
   */

  /* In this stage the MAC operations are increased by 1 for every iteration.    
     The count variable holds the number of MAC operations performed */
  count = 1u;

  /* Working pointer of inputA */
  px = pIn1;

  /* Working pointer of inputB */
  py = pIn2;


  /* ------------------------    
   * Stage1 process    
   * ----------------------*/

  /* The first stage starts here */
  while(blockSize1 > 0u)
  {
    /* Accumulator is made zero for every iteration */
    sum = 0.0f;

    /* Apply loop unrolling and compute 4 MACs simultaneously. */
    k = count >> 2u;

    /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.    
     ** a second loop below computes MACs for the remaining 1 to 3 samples. */
    while(k > 0u)
    {
      /* x[0] * y[srcBLen - 1] */
      sum += *px++ * *py--;

      /* x[1] * y[srcBLen - 2] */
      sum += *px++ * *py--;

      /* x[2] * y[srcBLen - 3] */
      sum += *px++ * *py--;

      /* x[3] * y[srcBLen - 4] */
      sum += *px++ * *py--;

      /* Decrement the loop counter */
      k--;
    }

    /* If the count is not a multiple of 4, compute any remaining MACs here.    
     ** No loop unrolling is used. */
    k = count % 0x4u;

    while(k > 0u)
    {
      /* Perform the multiply-accumulate */
      sum += *px++ * *py--;

      /* Decrement the loop counter */
      k--;
    }

    /* Store the result in the accumulator in the destination buffer. */
    *pOut++ = sum;

    /* Update the inputA and inputB pointers for next MAC calculation */
    py = pIn2 + count;
    px = pIn1;

    /* Increment the MAC count */
    count++;

    /* Decrement the loop counter */
    blockSize1--;
  }

  /* --------------------------    
   * Initializations of stage2    
   * ------------------------*/

  /* sum = x[0] * y[srcBLen-1] + x[1] * y[srcBLen-2] +...+ x[srcBLen-1] * y[0]    
   * sum = x[1] * y[srcBLen-1] + x[2] * y[srcBLen-2] +...+ x[srcBLen] * y[0]    
   * ....    
   * sum = x[srcALen-srcBLen-2] * y[srcBLen-1] + x[srcALen] * y[srcBLen-2] +...+ x[srcALen-1] * y[0]    
   */

  /* Working pointer of inputA */
  px = pIn1;

  /* Working pointer of inputB */
  pSrc2 = pIn2 + (srcBLen - 1u);
  py = pSrc2;

  /* count is index by which the pointer pIn1 to be incremented */
  count = 0u;

  /* -------------------    
   * Stage2 process    
   * ------------------*/

  /* Stage2 depends on srcBLen as in this stage srcBLen number of MACS are performed.    
   * So, to loop unroll over blockSize2,    
   * srcBLen should be greater than or equal to 4 */
  if(srcBLen >= 4u)
  {
    /* Loop unroll over blockSize2, by 4 */
    blkCnt = blockSize2 >> 2u;

    while(blkCnt > 0u)
    {
      /* Set all accumulators to zero */
      acc0 = 0.0f;
      acc1 = 0.0f;
      acc2 = 0.0f;
      acc3 = 0.0f;

      /* read x[0], x[1], x[2] samples */
      x0 = *(px++);
      x1 = *(px++);
      x2 = *(px++);

      /* Apply loop unrolling and compute 4 MACs simultaneously. */
      k = srcBLen >> 2u;

      /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.    
       ** a second loop below computes MACs for the remaining 1 to 3 samples. */
      do
      {
        /* Read y[srcBLen - 1] sample */
        c0 = *(py--);

        /* Read x[3] sample */
        x3 = *(px);

        /* Perform the multiply-accumulate */
        /* acc0 +=  x[0] * y[srcBLen - 1] */
        acc0 += x0 * c0;

        /* acc1 +=  x[1] * y[srcBLen - 1] */
        acc1 += x1 * c0;

        /* acc2 +=  x[2] * y[srcBLen - 1] */
        acc2 += x2 * c0;

        /* acc3 +=  x[3] * y[srcBLen - 1] */
        acc3 += x3 * c0;

        /* Read y[srcBLen - 2] sample */
        c0 = *(py--);

        /* Read x[4] sample */
        x0 = *(px + 1u);

        /* Perform the multiply-accumulate */
        /* acc0 +=  x[1] * y[srcBLen - 2] */
        acc0 += x1 * c0;
        /* acc1 +=  x[2] * y[srcBLen - 2] */
        acc1 += x2 * c0;
        /* acc2 +=  x[3] * y[srcBLen - 2] */
        acc2 += x3 * c0;
        /* acc3 +=  x[4] * y[srcBLen - 2] */
        acc3 += x0 * c0;

        /* Read y[srcBLen - 3] sample */
        c0 = *(py--);

        /* Read x[5] sample */
        x1 = *(px + 2u);

        /* Perform the multiply-accumulates */
        /* acc0 +=  x[2] * y[srcBLen - 3] */
        acc0 += x2 * c0;
        /* acc1 +=  x[3] * y[srcBLen - 2] */
        acc1 += x3 * c0;
        /* acc2 +=  x[4] * y[srcBLen - 2] */
        acc2 += x0 * c0;
        /* acc3 +=  x[5] * y[srcBLen - 2] */
        acc3 += x1 * c0;

        /* Read y[srcBLen - 4] sample */
        c0 = *(py--);

        /* Read x[6] sample */
        x2 = *(px + 3u);
        px += 4u;

        /* Perform the multiply-accumulates */
        /* acc0 +=  x[3] * y[srcBLen - 4] */
        acc0 += x3 * c0;
        /* acc1 +=  x[4] * y[srcBLen - 4] */
        acc1 += x0 * c0;
        /* acc2 +=  x[5] * y[srcBLen - 4] */
        acc2 += x1 * c0;
        /* acc3 +=  x[6] * y[srcBLen - 4] */
        acc3 += x2 * c0;


      } while(--k);

      /* If the srcBLen is not a multiple of 4, compute any remaining MACs here.    
       ** No loop unrolling is used. */
      k = srcBLen % 0x4u;

      while(k > 0u)
      {
        /* Read y[srcBLen - 5] sample */
        c0 = *(py--);

        /* Read x[7] sample */
        x3 = *(px++);

        /* Perform the multiply-accumulates */
        /* acc0 +=  x[4] * y[srcBLen - 5] */
        acc0 += x0 * c0;
        /* acc1 +=  x[5] * y[srcBLen - 5] */
        acc1 += x1 * c0;
        /* acc2 +=  x[6] * y[srcBLen - 5] */
        acc2 += x2 * c0;
        /* acc3 +=  x[7] * y[srcBLen - 5] */
        acc3 += x3 * c0;

        /* Reuse the present samples for the next MAC */
        x0 = x1;
        x1 = x2;
        x2 = x3;

        /* Decrement the loop counter */
        k--;
      }

      /* Store the result in the accumulator in the destination buffer. */
      *pOut++ = acc0;
      *pOut++ = acc1;
      *pOut++ = acc2;
      *pOut++ = acc3;

      /* Increment the pointer pIn1 index, count by 4 */
      count += 4u;

      /* Update the inputA and inputB pointers for next MAC calculation */
      px = pIn1 + count;
      py = pSrc2;


      /* Decrement the loop counter */
      blkCnt--;
    }


    /* If the blockSize2 is not a multiple of 4, compute any remaining output samples here.    
     ** No loop unrolling is used. */
    blkCnt = blockSize2 % 0x4u;

    while(blkCnt > 0u)
    {
      /* Accumulator is made zero for every iteration */
      sum = 0.0f;

      /* Apply loop unrolling and compute 4 MACs simultaneously. */
      k = srcBLen >> 2u;

      /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.    
       ** a second loop below computes MACs for the remaining 1 to 3 samples. */
      while(k > 0u)
      {
        /* Perform the multiply-accumulates */
        sum += *px++ * *py--;
        sum += *px++ * *py--;
        sum += *px++ * *py--;
        sum += *px++ * *py--;

        /* Decrement the loop counter */
        k--;
      }

      /* If the srcBLen is not a multiple of 4, compute any remaining MACs here.    
       ** No loop unrolling is used. */
      k = srcBLen % 0x4u;

      while(k > 0u)
      {
        /* Perform the multiply-accumulate */
        sum += *px++ * *py--;

        /* Decrement the loop counter */
        k--;
      }

      /* Store the result in the accumulator in the destination buffer. */
      *pOut++ = sum;

      /* Increment the MAC count */
      count++;

      /* Update the inputA and inputB pointers for next MAC calculation */
      px = pIn1 + count;
      py = pSrc2;

      /* Decrement the loop counter */
      blkCnt--;
    }
  }
  else
  {
    /* If the srcBLen is not a multiple of 4,    
     * the blockSize2 loop cannot be unrolled by 4 */
    blkCnt = blockSize2;

    while(blkCnt > 0u)
    {
      /* Accumulator is made zero for every iteration */
      sum = 0.0f;

      /* srcBLen number of MACS should be performed */
      k = srcBLen;

      while(k > 0u)
      {
        /* Perform the multiply-accumulate */
        sum += *px++ * *py--;

        /* Decrement the loop counter */
        k--;
      }

      /* Store the result in the accumulator in the destination buffer. */
      *pOut++ = sum;

      /* Increment the MAC count */
      count++;

      /* Update the inputA and inputB pointers for next MAC calculation */
      px = pIn1 + count;
      py = pSrc2;

      /* Decrement the loop counter */
      blkCnt--;
    }
  }


  /* --------------------------    
   * Initializations of stage3    
   * -------------------------*/

  /* sum += x[srcALen-srcBLen+1] * y[srcBLen-1] + x[srcALen-srcBLen+2] * y[srcBLen-2] +...+ x[srcALen-1] * y[1]    
   * sum += x[srcALen-srcBLen+2] * y[srcBLen-1] + x[srcALen-srcBLen+3] * y[srcBLen-2] +...+ x[srcALen-1] * y[2]    
   * ....    
   * sum +=  x[srcALen-2] * y[srcBLen-1] + x[srcALen-1] * y[srcBLen-2]    
   * sum +=  x[srcALen-1] * y[srcBLen-1]    
   */

  /* In this stage the MAC operations are decreased by 1 for every iteration.    
     The blockSize3 variable holds the number of MAC operations performed */

  /* Working pointer of inputA */
  pSrc1 = (pIn1 + srcALen) - (srcBLen - 1u);
  px = pSrc1;

  /* Working pointer of inputB */
  pSrc2 = pIn2 + (srcBLen - 1u);
  py = pSrc2;

  /* -------------------    
   * Stage3 process    
   * ------------------*/

  while(blockSize3 > 0u)
  {
    /* Accumulator is made zero for every iteration */
    sum = 0.0f;

    /* Apply loop unrolling and compute 4 MACs simultaneously. */
    k = blockSize3 >> 2u;

    /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.    
     ** a second loop below computes MACs for the remaining 1 to 3 samples. */
    while(k > 0u)
    {
      /* sum += x[srcALen - srcBLen + 1] * y[srcBLen - 1] */
      sum += *px++ * *py--;

      /* sum += x[srcALen - srcBLen + 2] * y[srcBLen - 2] */
      sum += *px++ * *py--;

      /* sum += x[srcALen - srcBLen + 3] * y[srcBLen - 3] */
      sum += *px++ * *py--;

      /* sum += x[srcALen - srcBLen + 4] * y[srcBLen - 4] */
      sum += *px++ * *py--;

      /* Decrement the loop counter */
      k--;
    }

    /* If the blockSize3 is not a multiple of 4, compute any remaining MACs here.    
     ** No loop unrolling is used. */
    k = blockSize3 % 0x4u;

    while(k > 0u)
    {
      /* Perform the multiply-accumulates */
      /* sum +=  x[srcALen-1] * y[srcBLen-1] */
      sum += *px++ * *py--;

      /* Decrement the loop counter */
      k--;
    }

    /* Store the result in the accumulator in the destination buffer. */
    *pOut++ = sum;

    /* Update the inputA and inputB pointers for next MAC calculation */
    px = ++pSrc1;
    py = pSrc2;

    /* Decrement the loop counter */
    blockSize3--;
  }

#else

  /* Run the below code for Cortex-M0 */

  float32_t *pIn1 = pSrcA;                       /* inputA pointer */
  float32_t *pIn2 = pSrcB;                       /* inputB pointer */
  float32_t sum;                                 /* Accumulator */
  uint32_t i, j;                                 /* loop counters */

  /* Loop to calculate convolution for output length number of times */
  for (i = 0u; i < ((srcALen + srcBLen) - 1u); i++)
  {
    /* Initialize sum with zero to carry out MAC operations */
    sum = 0.0f;

    /* Loop to perform MAC operations according to convolution equation */
    for (j = 0u; j <= i; j++)
    {
      /* Check the array limitations */
      if((((i - j) < srcBLen) && (j < srcALen)))
      {
        /* z[i] += x[i-j] * y[j] */
        sum += pIn1[j] * pIn2[i - j];
      }
    }
    /* Store the output in the destination buffer */
    pDst[i] = sum;
  }

#endif /*   #ifndef ARM_MATH_CM0_FAMILY        */

}

/**    
 * @} end of Conv group    
 */