| /* ---------------------------------------------------------------------- |
| * Copyright (C) 2010-2014 ARM Limited. All rights reserved. |
| * |
| * $Date: 19. March 2015 |
| * $Revision: V.1.4.5 |
| * |
| * Project: CMSIS DSP Library |
| * Title: arm_fir_q15.c |
| * |
| * Description: Q15 FIR filter processing function. |
| * |
| * Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of ARM LIMITED nor the names of its contributors |
| * may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * -------------------------------------------------------------------- */ |
| |
| #include "arm_math.h" |
| |
| /** |
| * @ingroup groupFilters |
| */ |
| |
| /** |
| * @addtogroup FIR |
| * @{ |
| */ |
| |
| /** |
| * @brief Processing function for the Q15 FIR filter. |
| * @param[in] *S points to an instance of the Q15 FIR structure. |
| * @param[in] *pSrc points to the block of input data. |
| * @param[out] *pDst points to the block of output data. |
| * @param[in] blockSize number of samples to process per call. |
| * @return none. |
| * |
| * |
| * \par Restrictions |
| * If the silicon does not support unaligned memory access enable the macro UNALIGNED_SUPPORT_DISABLE |
| * In this case input, output, state buffers should be aligned by 32-bit |
| * |
| * <b>Scaling and Overflow Behavior:</b> |
| * \par |
| * The function is implemented using a 64-bit internal accumulator. |
| * Both coefficients and state variables are represented in 1.15 format and multiplications yield a 2.30 result. |
| * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. |
| * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. |
| * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits. |
| * Lastly, the accumulator is saturated to yield a result in 1.15 format. |
| * |
| * \par |
| * Refer to the function <code>arm_fir_fast_q15()</code> for a faster but less precise implementation of this function. |
| */ |
| |
| #ifndef ARM_MATH_CM0_FAMILY |
| |
| /* Run the below code for Cortex-M4 and Cortex-M3 */ |
| |
| #ifndef UNALIGNED_SUPPORT_DISABLE |
| |
| |
| void arm_fir_q15( |
| const arm_fir_instance_q15 * S, |
| q15_t * pSrc, |
| q15_t * pDst, |
| uint32_t blockSize) |
| { |
| q15_t *pState = S->pState; /* State pointer */ |
| q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ |
| q15_t *pStateCurnt; /* Points to the current sample of the state */ |
| q15_t *px1; /* Temporary q15 pointer for state buffer */ |
| q15_t *pb; /* Temporary pointer for coefficient buffer */ |
| q31_t x0, x1, x2, x3, c0; /* Temporary variables to hold SIMD state and coefficient values */ |
| q63_t acc0, acc1, acc2, acc3; /* Accumulators */ |
| uint32_t numTaps = S->numTaps; /* Number of taps in the filter */ |
| uint32_t tapCnt, blkCnt; /* Loop counters */ |
| |
| |
| /* S->pState points to state array which contains previous frame (numTaps - 1) samples */ |
| /* pStateCurnt points to the location where the new input data should be written */ |
| pStateCurnt = &(S->pState[(numTaps - 1u)]); |
| |
| /* Apply loop unrolling and compute 4 output values simultaneously. |
| * The variables acc0 ... acc3 hold output values that are being computed: |
| * |
| * acc0 = b[numTaps-1] * x[n-numTaps-1] + b[numTaps-2] * x[n-numTaps-2] + b[numTaps-3] * x[n-numTaps-3] +...+ b[0] * x[0] |
| * acc1 = b[numTaps-1] * x[n-numTaps] + b[numTaps-2] * x[n-numTaps-1] + b[numTaps-3] * x[n-numTaps-2] +...+ b[0] * x[1] |
| * acc2 = b[numTaps-1] * x[n-numTaps+1] + b[numTaps-2] * x[n-numTaps] + b[numTaps-3] * x[n-numTaps-1] +...+ b[0] * x[2] |
| * acc3 = b[numTaps-1] * x[n-numTaps+2] + b[numTaps-2] * x[n-numTaps+1] + b[numTaps-3] * x[n-numTaps] +...+ b[0] * x[3] |
| */ |
| |
| blkCnt = blockSize >> 2; |
| |
| /* First part of the processing with loop unrolling. Compute 4 outputs at a time. |
| ** a second loop below computes the remaining 1 to 3 samples. */ |
| while(blkCnt > 0u) |
| { |
| /* Copy four new input samples into the state buffer. |
| ** Use 32-bit SIMD to move the 16-bit data. Only requires two copies. */ |
| *__SIMD32(pStateCurnt)++ = *__SIMD32(pSrc)++; |
| *__SIMD32(pStateCurnt)++ = *__SIMD32(pSrc)++; |
| |
| /* Set all accumulators to zero */ |
| acc0 = 0; |
| acc1 = 0; |
| acc2 = 0; |
| acc3 = 0; |
| |
| /* Initialize state pointer of type q15 */ |
| px1 = pState; |
| |
| /* Initialize coeff pointer of type q31 */ |
| pb = pCoeffs; |
| |
| /* Read the first two samples from the state buffer: x[n-N], x[n-N-1] */ |
| x0 = _SIMD32_OFFSET(px1); |
| |
| /* Read the third and forth samples from the state buffer: x[n-N-1], x[n-N-2] */ |
| x1 = _SIMD32_OFFSET(px1 + 1u); |
| |
| px1 += 2u; |
| |
| /* Loop over the number of taps. Unroll by a factor of 4. |
| ** Repeat until we've computed numTaps-4 coefficients. */ |
| tapCnt = numTaps >> 2; |
| |
| while(tapCnt > 0u) |
| { |
| /* Read the first two coefficients using SIMD: b[N] and b[N-1] coefficients */ |
| c0 = *__SIMD32(pb)++; |
| |
| /* acc0 += b[N] * x[n-N] + b[N-1] * x[n-N-1] */ |
| acc0 = __SMLALD(x0, c0, acc0); |
| |
| /* acc1 += b[N] * x[n-N-1] + b[N-1] * x[n-N-2] */ |
| acc1 = __SMLALD(x1, c0, acc1); |
| |
| /* Read state x[n-N-2], x[n-N-3] */ |
| x2 = _SIMD32_OFFSET(px1); |
| |
| /* Read state x[n-N-3], x[n-N-4] */ |
| x3 = _SIMD32_OFFSET(px1 + 1u); |
| |
| /* acc2 += b[N] * x[n-N-2] + b[N-1] * x[n-N-3] */ |
| acc2 = __SMLALD(x2, c0, acc2); |
| |
| /* acc3 += b[N] * x[n-N-3] + b[N-1] * x[n-N-4] */ |
| acc3 = __SMLALD(x3, c0, acc3); |
| |
| /* Read coefficients b[N-2], b[N-3] */ |
| c0 = *__SIMD32(pb)++; |
| |
| /* acc0 += b[N-2] * x[n-N-2] + b[N-3] * x[n-N-3] */ |
| acc0 = __SMLALD(x2, c0, acc0); |
| |
| /* acc1 += b[N-2] * x[n-N-3] + b[N-3] * x[n-N-4] */ |
| acc1 = __SMLALD(x3, c0, acc1); |
| |
| /* Read state x[n-N-4], x[n-N-5] */ |
| x0 = _SIMD32_OFFSET(px1 + 2u); |
| |
| /* Read state x[n-N-5], x[n-N-6] */ |
| x1 = _SIMD32_OFFSET(px1 + 3u); |
| |
| /* acc2 += b[N-2] * x[n-N-4] + b[N-3] * x[n-N-5] */ |
| acc2 = __SMLALD(x0, c0, acc2); |
| |
| /* acc3 += b[N-2] * x[n-N-5] + b[N-3] * x[n-N-6] */ |
| acc3 = __SMLALD(x1, c0, acc3); |
| |
| px1 += 4u; |
| |
| tapCnt--; |
| |
| } |
| |
| |
| /* If the filter length is not a multiple of 4, compute the remaining filter taps. |
| ** This is always be 2 taps since the filter length is even. */ |
| if((numTaps & 0x3u) != 0u) |
| { |
| /* Read 2 coefficients */ |
| c0 = *__SIMD32(pb)++; |
| |
| /* Fetch 4 state variables */ |
| x2 = _SIMD32_OFFSET(px1); |
| |
| x3 = _SIMD32_OFFSET(px1 + 1u); |
| |
| /* Perform the multiply-accumulates */ |
| acc0 = __SMLALD(x0, c0, acc0); |
| |
| px1 += 2u; |
| |
| acc1 = __SMLALD(x1, c0, acc1); |
| acc2 = __SMLALD(x2, c0, acc2); |
| acc3 = __SMLALD(x3, c0, acc3); |
| } |
| |
| /* The results in the 4 accumulators are in 2.30 format. Convert to 1.15 with saturation. |
| ** Then store the 4 outputs in the destination buffer. */ |
| |
| #ifndef ARM_MATH_BIG_ENDIAN |
| |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc0 >> 15), 16), __SSAT((acc1 >> 15), 16), 16); |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc2 >> 15), 16), __SSAT((acc3 >> 15), 16), 16); |
| |
| #else |
| |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc1 >> 15), 16), __SSAT((acc0 >> 15), 16), 16); |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc3 >> 15), 16), __SSAT((acc2 >> 15), 16), 16); |
| |
| #endif /* #ifndef ARM_MATH_BIG_ENDIAN */ |
| |
| |
| |
| /* Advance the state pointer by 4 to process the next group of 4 samples */ |
| pState = pState + 4; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize is not a multiple of 4, compute any remaining output samples here. |
| ** No loop unrolling is used. */ |
| blkCnt = blockSize % 0x4u; |
| while(blkCnt > 0u) |
| { |
| /* Copy two samples into state buffer */ |
| *pStateCurnt++ = *pSrc++; |
| |
| /* Set the accumulator to zero */ |
| acc0 = 0; |
| |
| /* Initialize state pointer of type q15 */ |
| px1 = pState; |
| |
| /* Initialize coeff pointer of type q31 */ |
| pb = pCoeffs; |
| |
| tapCnt = numTaps >> 1; |
| |
| do |
| { |
| |
| c0 = *__SIMD32(pb)++; |
| x0 = *__SIMD32(px1)++; |
| |
| acc0 = __SMLALD(x0, c0, acc0); |
| tapCnt--; |
| } |
| while(tapCnt > 0u); |
| |
| /* The result is in 2.30 format. Convert to 1.15 with saturation. |
| ** Then store the output in the destination buffer. */ |
| *pDst++ = (q15_t) (__SSAT((acc0 >> 15), 16)); |
| |
| /* Advance state pointer by 1 for the next sample */ |
| pState = pState + 1; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Processing is complete. |
| ** Now copy the last numTaps - 1 samples to the satrt of the state buffer. |
| ** This prepares the state buffer for the next function call. */ |
| |
| /* Points to the start of the state buffer */ |
| pStateCurnt = S->pState; |
| |
| /* Calculation of count for copying integer writes */ |
| tapCnt = (numTaps - 1u) >> 2; |
| |
| while(tapCnt > 0u) |
| { |
| |
| /* Copy state values to start of state buffer */ |
| *__SIMD32(pStateCurnt)++ = *__SIMD32(pState)++; |
| *__SIMD32(pStateCurnt)++ = *__SIMD32(pState)++; |
| |
| tapCnt--; |
| |
| } |
| |
| /* Calculation of count for remaining q15_t data */ |
| tapCnt = (numTaps - 1u) % 0x4u; |
| |
| /* copy remaining data */ |
| while(tapCnt > 0u) |
| { |
| *pStateCurnt++ = *pState++; |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| } |
| |
| #else /* UNALIGNED_SUPPORT_DISABLE */ |
| |
| void arm_fir_q15( |
| const arm_fir_instance_q15 * S, |
| q15_t * pSrc, |
| q15_t * pDst, |
| uint32_t blockSize) |
| { |
| q15_t *pState = S->pState; /* State pointer */ |
| q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ |
| q15_t *pStateCurnt; /* Points to the current sample of the state */ |
| q63_t acc0, acc1, acc2, acc3; /* Accumulators */ |
| q15_t *pb; /* Temporary pointer for coefficient buffer */ |
| q15_t *px; /* Temporary q31 pointer for SIMD state buffer accesses */ |
| q31_t x0, x1, x2, c0; /* Temporary variables to hold SIMD state and coefficient values */ |
| uint32_t numTaps = S->numTaps; /* Number of taps in the filter */ |
| uint32_t tapCnt, blkCnt; /* Loop counters */ |
| |
| |
| /* S->pState points to state array which contains previous frame (numTaps - 1) samples */ |
| /* pStateCurnt points to the location where the new input data should be written */ |
| pStateCurnt = &(S->pState[(numTaps - 1u)]); |
| |
| /* Apply loop unrolling and compute 4 output values simultaneously. |
| * The variables acc0 ... acc3 hold output values that are being computed: |
| * |
| * acc0 = b[numTaps-1] * x[n-numTaps-1] + b[numTaps-2] * x[n-numTaps-2] + b[numTaps-3] * x[n-numTaps-3] +...+ b[0] * x[0] |
| * acc1 = b[numTaps-1] * x[n-numTaps] + b[numTaps-2] * x[n-numTaps-1] + b[numTaps-3] * x[n-numTaps-2] +...+ b[0] * x[1] |
| * acc2 = b[numTaps-1] * x[n-numTaps+1] + b[numTaps-2] * x[n-numTaps] + b[numTaps-3] * x[n-numTaps-1] +...+ b[0] * x[2] |
| * acc3 = b[numTaps-1] * x[n-numTaps+2] + b[numTaps-2] * x[n-numTaps+1] + b[numTaps-3] * x[n-numTaps] +...+ b[0] * x[3] |
| */ |
| |
| blkCnt = blockSize >> 2; |
| |
| /* First part of the processing with loop unrolling. Compute 4 outputs at a time. |
| ** a second loop below computes the remaining 1 to 3 samples. */ |
| while(blkCnt > 0u) |
| { |
| /* Copy four new input samples into the state buffer. |
| ** Use 32-bit SIMD to move the 16-bit data. Only requires two copies. */ |
| *pStateCurnt++ = *pSrc++; |
| *pStateCurnt++ = *pSrc++; |
| *pStateCurnt++ = *pSrc++; |
| *pStateCurnt++ = *pSrc++; |
| |
| |
| /* Set all accumulators to zero */ |
| acc0 = 0; |
| acc1 = 0; |
| acc2 = 0; |
| acc3 = 0; |
| |
| /* Typecast q15_t pointer to q31_t pointer for state reading in q31_t */ |
| px = pState; |
| |
| /* Typecast q15_t pointer to q31_t pointer for coefficient reading in q31_t */ |
| pb = pCoeffs; |
| |
| /* Read the first two samples from the state buffer: x[n-N], x[n-N-1] */ |
| x0 = *__SIMD32(px)++; |
| |
| /* Read the third and forth samples from the state buffer: x[n-N-2], x[n-N-3] */ |
| x2 = *__SIMD32(px)++; |
| |
| /* Loop over the number of taps. Unroll by a factor of 4. |
| ** Repeat until we've computed numTaps-(numTaps%4) coefficients. */ |
| tapCnt = numTaps >> 2; |
| |
| while(tapCnt > 0) |
| { |
| /* Read the first two coefficients using SIMD: b[N] and b[N-1] coefficients */ |
| c0 = *__SIMD32(pb)++; |
| |
| /* acc0 += b[N] * x[n-N] + b[N-1] * x[n-N-1] */ |
| acc0 = __SMLALD(x0, c0, acc0); |
| |
| /* acc2 += b[N] * x[n-N-2] + b[N-1] * x[n-N-3] */ |
| acc2 = __SMLALD(x2, c0, acc2); |
| |
| /* pack x[n-N-1] and x[n-N-2] */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x1 = __PKHBT(x2, x0, 0); |
| #else |
| x1 = __PKHBT(x0, x2, 0); |
| #endif |
| |
| /* Read state x[n-N-4], x[n-N-5] */ |
| x0 = _SIMD32_OFFSET(px); |
| |
| /* acc1 += b[N] * x[n-N-1] + b[N-1] * x[n-N-2] */ |
| acc1 = __SMLALDX(x1, c0, acc1); |
| |
| /* pack x[n-N-3] and x[n-N-4] */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x1 = __PKHBT(x0, x2, 0); |
| #else |
| x1 = __PKHBT(x2, x0, 0); |
| #endif |
| |
| /* acc3 += b[N] * x[n-N-3] + b[N-1] * x[n-N-4] */ |
| acc3 = __SMLALDX(x1, c0, acc3); |
| |
| /* Read coefficients b[N-2], b[N-3] */ |
| c0 = *__SIMD32(pb)++; |
| |
| /* acc0 += b[N-2] * x[n-N-2] + b[N-3] * x[n-N-3] */ |
| acc0 = __SMLALD(x2, c0, acc0); |
| |
| /* Read state x[n-N-6], x[n-N-7] with offset */ |
| x2 = _SIMD32_OFFSET(px + 2u); |
| |
| /* acc2 += b[N-2] * x[n-N-4] + b[N-3] * x[n-N-5] */ |
| acc2 = __SMLALD(x0, c0, acc2); |
| |
| /* acc1 += b[N-2] * x[n-N-3] + b[N-3] * x[n-N-4] */ |
| acc1 = __SMLALDX(x1, c0, acc1); |
| |
| /* pack x[n-N-5] and x[n-N-6] */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x1 = __PKHBT(x2, x0, 0); |
| #else |
| x1 = __PKHBT(x0, x2, 0); |
| #endif |
| |
| /* acc3 += b[N-2] * x[n-N-5] + b[N-3] * x[n-N-6] */ |
| acc3 = __SMLALDX(x1, c0, acc3); |
| |
| /* Update state pointer for next state reading */ |
| px += 4u; |
| |
| /* Decrement tap count */ |
| tapCnt--; |
| |
| } |
| |
| /* If the filter length is not a multiple of 4, compute the remaining filter taps. |
| ** This is always be 2 taps since the filter length is even. */ |
| if((numTaps & 0x3u) != 0u) |
| { |
| |
| /* Read last two coefficients */ |
| c0 = *__SIMD32(pb)++; |
| |
| /* Perform the multiply-accumulates */ |
| acc0 = __SMLALD(x0, c0, acc0); |
| acc2 = __SMLALD(x2, c0, acc2); |
| |
| /* pack state variables */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x1 = __PKHBT(x2, x0, 0); |
| #else |
| x1 = __PKHBT(x0, x2, 0); |
| #endif |
| |
| /* Read last state variables */ |
| x0 = *__SIMD32(px); |
| |
| /* Perform the multiply-accumulates */ |
| acc1 = __SMLALDX(x1, c0, acc1); |
| |
| /* pack state variables */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x1 = __PKHBT(x0, x2, 0); |
| #else |
| x1 = __PKHBT(x2, x0, 0); |
| #endif |
| |
| /* Perform the multiply-accumulates */ |
| acc3 = __SMLALDX(x1, c0, acc3); |
| } |
| |
| /* The results in the 4 accumulators are in 2.30 format. Convert to 1.15 with saturation. |
| ** Then store the 4 outputs in the destination buffer. */ |
| |
| #ifndef ARM_MATH_BIG_ENDIAN |
| |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc0 >> 15), 16), __SSAT((acc1 >> 15), 16), 16); |
| |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc2 >> 15), 16), __SSAT((acc3 >> 15), 16), 16); |
| |
| #else |
| |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc1 >> 15), 16), __SSAT((acc0 >> 15), 16), 16); |
| |
| *__SIMD32(pDst)++ = |
| __PKHBT(__SSAT((acc3 >> 15), 16), __SSAT((acc2 >> 15), 16), 16); |
| |
| #endif /* #ifndef ARM_MATH_BIG_ENDIAN */ |
| |
| /* Advance the state pointer by 4 to process the next group of 4 samples */ |
| pState = pState + 4; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize is not a multiple of 4, compute any remaining output samples here. |
| ** No loop unrolling is used. */ |
| blkCnt = blockSize % 0x4u; |
| while(blkCnt > 0u) |
| { |
| /* Copy two samples into state buffer */ |
| *pStateCurnt++ = *pSrc++; |
| |
| /* Set the accumulator to zero */ |
| acc0 = 0; |
| |
| /* Use SIMD to hold states and coefficients */ |
| px = pState; |
| pb = pCoeffs; |
| |
| tapCnt = numTaps >> 1u; |
| |
| do |
| { |
| acc0 += (q31_t) * px++ * *pb++; |
| acc0 += (q31_t) * px++ * *pb++; |
| tapCnt--; |
| } |
| while(tapCnt > 0u); |
| |
| /* The result is in 2.30 format. Convert to 1.15 with saturation. |
| ** Then store the output in the destination buffer. */ |
| *pDst++ = (q15_t) (__SSAT((acc0 >> 15), 16)); |
| |
| /* Advance state pointer by 1 for the next sample */ |
| pState = pState + 1u; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Processing is complete. |
| ** Now copy the last numTaps - 1 samples to the satrt of the state buffer. |
| ** This prepares the state buffer for the next function call. */ |
| |
| /* Points to the start of the state buffer */ |
| pStateCurnt = S->pState; |
| |
| /* Calculation of count for copying integer writes */ |
| tapCnt = (numTaps - 1u) >> 2; |
| |
| while(tapCnt > 0u) |
| { |
| *pStateCurnt++ = *pState++; |
| *pStateCurnt++ = *pState++; |
| *pStateCurnt++ = *pState++; |
| *pStateCurnt++ = *pState++; |
| |
| tapCnt--; |
| |
| } |
| |
| /* Calculation of count for remaining q15_t data */ |
| tapCnt = (numTaps - 1u) % 0x4u; |
| |
| /* copy remaining data */ |
| while(tapCnt > 0u) |
| { |
| *pStateCurnt++ = *pState++; |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| } |
| |
| |
| #endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ |
| |
| #else /* ARM_MATH_CM0_FAMILY */ |
| |
| |
| /* Run the below code for Cortex-M0 */ |
| |
| void arm_fir_q15( |
| const arm_fir_instance_q15 * S, |
| q15_t * pSrc, |
| q15_t * pDst, |
| uint32_t blockSize) |
| { |
| q15_t *pState = S->pState; /* State pointer */ |
| q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ |
| q15_t *pStateCurnt; /* Points to the current sample of the state */ |
| |
| |
| |
| q15_t *px; /* Temporary pointer for state buffer */ |
| q15_t *pb; /* Temporary pointer for coefficient buffer */ |
| q63_t acc; /* Accumulator */ |
| uint32_t numTaps = S->numTaps; /* Number of nTaps in the filter */ |
| uint32_t tapCnt, blkCnt; /* Loop counters */ |
| |
| /* S->pState buffer contains previous frame (numTaps - 1) samples */ |
| /* pStateCurnt points to the location where the new input data should be written */ |
| pStateCurnt = &(S->pState[(numTaps - 1u)]); |
| |
| /* Initialize blkCnt with blockSize */ |
| blkCnt = blockSize; |
| |
| while(blkCnt > 0u) |
| { |
| /* Copy one sample at a time into state buffer */ |
| *pStateCurnt++ = *pSrc++; |
| |
| /* Set the accumulator to zero */ |
| acc = 0; |
| |
| /* Initialize state pointer */ |
| px = pState; |
| |
| /* Initialize Coefficient pointer */ |
| pb = pCoeffs; |
| |
| tapCnt = numTaps; |
| |
| /* Perform the multiply-accumulates */ |
| do |
| { |
| /* acc = b[numTaps-1] * x[n-numTaps-1] + b[numTaps-2] * x[n-numTaps-2] + b[numTaps-3] * x[n-numTaps-3] +...+ b[0] * x[0] */ |
| acc += (q31_t) * px++ * *pb++; |
| tapCnt--; |
| } while(tapCnt > 0u); |
| |
| /* The result is in 2.30 format. Convert to 1.15 |
| ** Then store the output in the destination buffer. */ |
| *pDst++ = (q15_t) __SSAT((acc >> 15u), 16); |
| |
| /* Advance state pointer by 1 for the next sample */ |
| pState = pState + 1; |
| |
| /* Decrement the samples loop counter */ |
| blkCnt--; |
| } |
| |
| /* Processing is complete. |
| ** Now copy the last numTaps - 1 samples to the satrt of the state buffer. |
| ** This prepares the state buffer for the next function call. */ |
| |
| /* Points to the start of the state buffer */ |
| pStateCurnt = S->pState; |
| |
| /* Copy numTaps number of values */ |
| tapCnt = (numTaps - 1u); |
| |
| /* copy data */ |
| while(tapCnt > 0u) |
| { |
| *pStateCurnt++ = *pState++; |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| |
| } |
| |
| #endif /* #ifndef ARM_MATH_CM0_FAMILY */ |
| |
| |
| |
| |
| /** |
| * @} end of FIR group |
| */ |
