blob: 9b91c362f790c93a69e43d2aecc963fef6a7e5f7 [file] [log] [blame]
/* ----------------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_q15_to_q7.c
*
* Description: Converts the elements of the Q15 vector to Q7 vector.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* ---------------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupSupport
*/
/**
* @addtogroup q15_to_x
* @{
*/
/**
* @brief Converts the elements of the Q15 vector to Q7 vector.
* @param[in] *pSrc points to the Q15 input vector
* @param[out] *pDst points to the Q7 output vector
* @param[in] blockSize length of the input vector
* @return none.
*
* \par Description:
*
* The equation used for the conversion process is:
*
* <pre>
* pDst[n] = (q7_t) pSrc[n] >> 8; 0 <= n < blockSize.
* </pre>
*
*/
void arm_q15_to_q7(
q15_t * pSrc,
q7_t * pDst,
uint32_t blockSize)
{
q15_t *pIn = pSrc; /* Src pointer */
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t in1, in2;
q31_t out1, out2;
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = (q7_t) A >> 8 */
/* convert from q15 to q7 and then store the results in the destination buffer */
in1 = *__SIMD32(pIn)++;
in2 = *__SIMD32(pIn)++;
#ifndef ARM_MATH_BIG_ENDIAN
out1 = __PKHTB(in2, in1, 16);
out2 = __PKHBT(in2, in1, 16);
#else
out1 = __PKHTB(in1, in2, 16);
out2 = __PKHBT(in1, in2, 16);
#endif // #ifndef ARM_MATH_BIG_ENDIAN
/* rotate packed value by 24 */
out2 = ((uint32_t) out2 << 8) | ((uint32_t) out2 >> 24);
/* anding with 0xff00ff00 to get two 8 bit values */
out1 = out1 & 0xFF00FF00;
/* anding with 0x00ff00ff to get two 8 bit values */
out2 = out2 & 0x00FF00FF;
/* oring two values(contains two 8 bit values) to get four packed 8 bit values */
out1 = out1 | out2;
/* store 4 samples at a time to destiantion buffer */
*__SIMD32(pDst)++ = out1;
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Loop over blockSize number of values */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = (q7_t) A >> 8 */
/* convert from q15 to q7 and then store the results in the destination buffer */
*pDst++ = (q7_t) (*pIn++ >> 8);
/* Decrement the loop counter */
blkCnt--;
}
}
/**
* @} end of q15_to_x group
*/