/* ----------------------------------------------------------------------
 * Project:      CMSIS DSP Library
 * Title:        arm_correlate_q31.c
 * Description:  Correlation of Q31 sequences
 *
 * $Date:        27. January 2017
 * $Revision:    V.1.5.1
 *
 * Target Processor: Cortex-M cores
 * -------------------------------------------------------------------- */
/*
 * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "arm_math.h"

/**
 * @ingroup groupFilters
 */

/**
 * @addtogroup Corr
 * @{
 */

/**
 * @brief Correlation of Q31 sequences.
 * @param[in] *pSrcA points to the first input sequence.
 * @param[in] srcALen length of the first input sequence.
 * @param[in] *pSrcB points to the second input sequence.
 * @param[in] srcBLen length of the second input sequence.
 * @param[out] *pDst points to the location where the output result is written.  Length 2 * max(srcALen, srcBLen) - 1.
 * @return none.
 *
 * @details
 * <b>Scaling and Overflow Behavior:</b>
 *
 * \par
 * The function is implemented using an internal 64-bit accumulator.
 * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
 * There is no saturation on intermediate additions.
 * Thus, if the accumulator overflows it wraps around and distorts the result.
 * The input signals should be scaled down to avoid intermediate overflows.
 * Scale down one of the inputs by 1/min(srcALen, srcBLen)to avoid overflows since a
 * maximum of min(srcALen, srcBLen) number of additions is carried internally.
 * The 2.62 accumulator is right shifted by 31 bits and saturated to 1.31 format to yield the final result.
 *
 * \par
 * See <code>arm_correlate_fast_q31()</code> for a faster but less precise implementation of this function for Cortex-M3 and Cortex-M4.
 */

void arm_correlate_q31(
  q31_t * pSrcA,
  uint32_t srcALen,
  q31_t * pSrcB,
  uint32_t srcBLen,
  q31_t * pDst)
{

#if defined (ARM_MATH_DSP)

  /* Run the below code for Cortex-M4 and Cortex-M3 */

  q31_t *pIn1;                                   /* inputA pointer               */
  q31_t *pIn2;                                   /* inputB pointer               */
  q31_t *pOut = pDst;                            /* output pointer               */
  q31_t *px;                                     /* Intermediate inputA pointer  */
  q31_t *py;                                     /* Intermediate inputB pointer  */
  q31_t *pSrc1;                                  /* Intermediate pointers        */
  q63_t sum, acc0, acc1, acc2;                   /* Accumulators                  */
  q31_t x0, x1, x2, c0;                          /* temporary variables for holding input and coefficient values */
  uint32_t j, k = 0U, count, blkCnt, outBlockSize, blockSize1, blockSize2, blockSize3;  /* loop counter                 */
  int32_t inc = 1;                               /* Destination address modifier */


  /* The algorithm implementation is based on the lengths of the inputs. */
  /* srcB is always made to slide across srcA. */
  /* So srcBLen is always considered as shorter or equal to srcALen */
  /* But CORR(x, y) is reverse of CORR(y, x) */
  /* So, when srcBLen > srcALen, output pointer is made to point to the end of the output buffer */
  /* and the destination pointer modifier, inc is set to -1 */
  /* If srcALen > srcBLen, zero pad has to be done to srcB to make the two inputs of same length */
  /* But to improve the performance,
   * we include zeroes in the output instead of zero padding either of the the inputs*/
  /* If srcALen > srcBLen,
   * (srcALen - srcBLen) zeroes has to included in the starting of the output buffer */
  /* If srcALen < srcBLen,
   * (srcALen - srcBLen) zeroes has to included in the ending of the output buffer */
  if (srcALen >= srcBLen)
  {
    /* Initialization of inputA pointer */
    pIn1 = (pSrcA);

    /* Initialization of inputB pointer */
    pIn2 = (pSrcB);

    /* Number of output samples is calculated */
    outBlockSize = (2U * srcALen) - 1U;

    /* When srcALen > srcBLen, zero padding is done to srcB
     * to make their lengths equal.
     * Instead, (outBlockSize - (srcALen + srcBLen - 1))
     * number of output samples are made zero */
    j = outBlockSize - (srcALen + (srcBLen - 1U));

    /* Updating the pointer position to non zero value */
    pOut += j;

  }
  else
  {
    /* Initialization of inputA pointer */
    pIn1 = (pSrcB);

    /* Initialization of inputB pointer */
    pIn2 = (pSrcA);

    /* srcBLen is always considered as shorter or equal to srcALen */
    j = srcBLen;
    srcBLen = srcALen;
    srcALen = j;

    /* CORR(x, y) = Reverse order(CORR(y, x)) */
    /* Hence set the destination pointer to point to the last output sample */
    pOut = pDst + ((srcALen + srcBLen) - 2U);

    /* Destination address modifier is set to -1 */
    inc = -1;

  }

  /* The function is internally
   * divided into three parts according to the number of multiplications that has to be
   * taken place between inputA samples and inputB samples. In the first part of the
   * algorithm, the multiplications increase by one for every iteration.
   * In the second part of the algorithm, srcBLen number of multiplications are done.
   * In the third part of the algorithm, the multiplications decrease by one
   * for every iteration.*/
  /* The algorithm is implemented in three stages.
   * The loop counters of each stage is initiated here. */
  blockSize1 = srcBLen - 1U;
  blockSize2 = srcALen - (srcBLen - 1U);
  blockSize3 = blockSize1;

  /* --------------------------
   * Initializations of stage1
   * -------------------------*/

  /* sum = x[0] * y[srcBlen - 1]
   * sum = x[0] * y[srcBlen - 2] + x[1] * y[srcBlen - 1]
   * ....
   * sum = x[0] * y[0] + x[1] * y[1] +...+ x[srcBLen - 1] * y[srcBLen - 1]
   */

  /* In this stage the MAC operations are increased by 1 for every iteration.
     The count variable holds the number of MAC operations performed */
  count = 1U;

  /* Working pointer of inputA */
  px = pIn1;

  /* Working pointer of inputB */
  pSrc1 = pIn2 + (srcBLen - 1U);
  py = pSrc1;

  /* ------------------------
   * Stage1 process
   * ----------------------*/

  /* The first stage starts here */
  while (blockSize1 > 0U)
  {
    /* Accumulator is made zero for every iteration */
    sum = 0;

    /* Apply loop unrolling and compute 4 MACs simultaneously. */
    k = count >> 2;

    /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.
     ** a second loop below computes MACs for the remaining 1 to 3 samples. */
    while (k > 0U)
    {
      /* x[0] * y[srcBLen - 4] */
      sum += (q63_t) * px++ * (*py++);
      /* x[1] * y[srcBLen - 3] */
      sum += (q63_t) * px++ * (*py++);
      /* x[2] * y[srcBLen - 2] */
      sum += (q63_t) * px++ * (*py++);
      /* x[3] * y[srcBLen - 1] */
      sum += (q63_t) * px++ * (*py++);

      /* Decrement the loop counter */
      k--;
    }

    /* If the count is not a multiple of 4, compute any remaining MACs here.
     ** No loop unrolling is used. */
    k = count % 0x4U;

    while (k > 0U)
    {
      /* Perform the multiply-accumulates */
      /* x[0] * y[srcBLen - 1] */
      sum += (q63_t) * px++ * (*py++);

      /* Decrement the loop counter */
      k--;
    }

    /* Store the result in the accumulator in the destination buffer. */
    *pOut = (q31_t) (sum >> 31);
    /* Destination pointer is updated according to the address modifier, inc */
    pOut += inc;

    /* Update the inputA and inputB pointers for next MAC calculation */
    py = pSrc1 - count;
    px = pIn1;

    /* Increment the MAC count */
    count++;

    /* Decrement the loop counter */
    blockSize1--;
  }

  /* --------------------------
   * Initializations of stage2
   * ------------------------*/

  /* sum = x[0] * y[0] + x[1] * y[1] +...+ x[srcBLen-1] * y[srcBLen-1]
   * sum = x[1] * y[0] + x[2] * y[1] +...+ x[srcBLen] * y[srcBLen-1]
   * ....
   * sum = x[srcALen-srcBLen-2] * y[0] + x[srcALen-srcBLen-1] * y[1] +...+ x[srcALen-1] * y[srcBLen-1]
   */

  /* Working pointer of inputA */
  px = pIn1;

  /* Working pointer of inputB */
  py = pIn2;

  /* count is index by which the pointer pIn1 to be incremented */
  count = 0U;

  /* -------------------
   * Stage2 process
   * ------------------*/

  /* Stage2 depends on srcBLen as in this stage srcBLen number of MACS are performed.
   * So, to loop unroll over blockSize2,
   * srcBLen should be greater than or equal to 4 */
  if (srcBLen >= 4U)
  {
    /* Loop unroll by 3 */
    blkCnt = blockSize2 / 3;

    while (blkCnt > 0U)
    {
      /* Set all accumulators to zero */
      acc0 = 0;
      acc1 = 0;
      acc2 = 0;

      /* read x[0], x[1] samples */
      x0 = *(px++);
      x1 = *(px++);

      /* Apply loop unrolling and compute 3 MACs simultaneously. */
      k = srcBLen / 3;

      /* First part of the processing with loop unrolling.  Compute 3 MACs at a time.
       ** a second loop below computes MACs for the remaining 1 to 2 samples. */
      do
      {
        /* Read y[0] sample */
        c0 = *(py);

        /* Read x[2] sample */
        x2 = *(px);

        /* Perform the multiply-accumulate */
        /* acc0 +=  x[0] * y[0] */
        acc0 += ((q63_t) x0 * c0);
        /* acc1 +=  x[1] * y[0] */
        acc1 += ((q63_t) x1 * c0);
        /* acc2 +=  x[2] * y[0] */
        acc2 += ((q63_t) x2 * c0);

        /* Read y[1] sample */
        c0 = *(py + 1U);

        /* Read x[3] sample */
        x0 = *(px + 1U);

        /* Perform the multiply-accumulates */
        /* acc0 +=  x[1] * y[1] */
        acc0 += ((q63_t) x1 * c0);
        /* acc1 +=  x[2] * y[1] */
        acc1 += ((q63_t) x2 * c0);
        /* acc2 +=  x[3] * y[1] */
        acc2 += ((q63_t) x0 * c0);

        /* Read y[2] sample */
        c0 = *(py + 2U);

        /* Read x[4] sample */
        x1 = *(px + 2U);

        /* Perform the multiply-accumulates */
        /* acc0 +=  x[2] * y[2] */
        acc0 += ((q63_t) x2 * c0);
        /* acc1 +=  x[3] * y[2] */
        acc1 += ((q63_t) x0 * c0);
        /* acc2 +=  x[4] * y[2] */
        acc2 += ((q63_t) x1 * c0);

        /* update scratch pointers */
        px += 3U;
        py += 3U;

      } while (--k);

      /* If the srcBLen is not a multiple of 3, compute any remaining MACs here.
       ** No loop unrolling is used. */
      k = srcBLen - (3 * (srcBLen / 3));

      while (k > 0U)
      {
        /* Read y[4] sample */
        c0 = *(py++);

        /* Read x[7] sample */
        x2 = *(px++);

        /* Perform the multiply-accumulates */
        /* acc0 +=  x[4] * y[4] */
        acc0 += ((q63_t) x0 * c0);
        /* acc1 +=  x[5] * y[4] */
        acc1 += ((q63_t) x1 * c0);
        /* acc2 +=  x[6] * y[4] */
        acc2 += ((q63_t) x2 * c0);

        /* Reuse the present samples for the next MAC */
        x0 = x1;
        x1 = x2;

        /* Decrement the loop counter */
        k--;
      }

      /* Store the result in the accumulator in the destination buffer. */
      *pOut = (q31_t) (acc0 >> 31);
      /* Destination pointer is updated according to the address modifier, inc */
      pOut += inc;

      *pOut = (q31_t) (acc1 >> 31);
      pOut += inc;

      *pOut = (q31_t) (acc2 >> 31);
      pOut += inc;

      /* Increment the pointer pIn1 index, count by 3 */
      count += 3U;

      /* Update the inputA and inputB pointers for next MAC calculation */
      px = pIn1 + count;
      py = pIn2;


      /* Decrement the loop counter */
      blkCnt--;
    }

    /* If the blockSize2 is not a multiple of 3, compute any remaining output samples here.
     ** No loop unrolling is used. */
    blkCnt = blockSize2 - 3 * (blockSize2 / 3);

    while (blkCnt > 0U)
    {
      /* Accumulator is made zero for every iteration */
      sum = 0;

      /* Apply loop unrolling and compute 4 MACs simultaneously. */
      k = srcBLen >> 2U;

      /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.
       ** a second loop below computes MACs for the remaining 1 to 3 samples. */
      while (k > 0U)
      {
        /* Perform the multiply-accumulates */
        sum += (q63_t) * px++ * (*py++);
        sum += (q63_t) * px++ * (*py++);
        sum += (q63_t) * px++ * (*py++);
        sum += (q63_t) * px++ * (*py++);

        /* Decrement the loop counter */
        k--;
      }

      /* If the srcBLen is not a multiple of 4, compute any remaining MACs here.
       ** No loop unrolling is used. */
      k = srcBLen % 0x4U;

      while (k > 0U)
      {
        /* Perform the multiply-accumulate */
        sum += (q63_t) * px++ * (*py++);

        /* Decrement the loop counter */
        k--;
      }

      /* Store the result in the accumulator in the destination buffer. */
      *pOut = (q31_t) (sum >> 31);
      /* Destination pointer is updated according to the address modifier, inc */
      pOut += inc;

      /* Increment the MAC count */
      count++;

      /* Update the inputA and inputB pointers for next MAC calculation */
      px = pIn1 + count;
      py = pIn2;

      /* Decrement the loop counter */
      blkCnt--;
    }
  }
  else
  {
    /* If the srcBLen is not a multiple of 4,
     * the blockSize2 loop cannot be unrolled by 4 */
    blkCnt = blockSize2;

    while (blkCnt > 0U)
    {
      /* Accumulator is made zero for every iteration */
      sum = 0;

      /* Loop over srcBLen */
      k = srcBLen;

      while (k > 0U)
      {
        /* Perform the multiply-accumulate */
        sum += (q63_t) * px++ * (*py++);

        /* Decrement the loop counter */
        k--;
      }

      /* Store the result in the accumulator in the destination buffer. */
      *pOut = (q31_t) (sum >> 31);
      /* Destination pointer is updated according to the address modifier, inc */
      pOut += inc;

      /* Increment the MAC count */
      count++;

      /* Update the inputA and inputB pointers for next MAC calculation */
      px = pIn1 + count;
      py = pIn2;

      /* Decrement the loop counter */
      blkCnt--;
    }
  }

  /* --------------------------
   * Initializations of stage3
   * -------------------------*/

  /* sum += x[srcALen-srcBLen+1] * y[0] + x[srcALen-srcBLen+2] * y[1] +...+ x[srcALen-1] * y[srcBLen-1]
   * sum += x[srcALen-srcBLen+2] * y[0] + x[srcALen-srcBLen+3] * y[1] +...+ x[srcALen-1] * y[srcBLen-1]
   * ....
   * sum +=  x[srcALen-2] * y[0] + x[srcALen-1] * y[1]
   * sum +=  x[srcALen-1] * y[0]
   */

  /* In this stage the MAC operations are decreased by 1 for every iteration.
     The count variable holds the number of MAC operations performed */
  count = srcBLen - 1U;

  /* Working pointer of inputA */
  pSrc1 = pIn1 + (srcALen - (srcBLen - 1U));
  px = pSrc1;

  /* Working pointer of inputB */
  py = pIn2;

  /* -------------------
   * Stage3 process
   * ------------------*/

  while (blockSize3 > 0U)
  {
    /* Accumulator is made zero for every iteration */
    sum = 0;

    /* Apply loop unrolling and compute 4 MACs simultaneously. */
    k = count >> 2U;

    /* First part of the processing with loop unrolling.  Compute 4 MACs at a time.
     ** a second loop below computes MACs for the remaining 1 to 3 samples. */
    while (k > 0U)
    {
      /* Perform the multiply-accumulates */
      /* sum += x[srcALen - srcBLen + 4] * y[3] */
      sum += (q63_t) * px++ * (*py++);
      /* sum += x[srcALen - srcBLen + 3] * y[2] */
      sum += (q63_t) * px++ * (*py++);
      /* sum += x[srcALen - srcBLen + 2] * y[1] */
      sum += (q63_t) * px++ * (*py++);
      /* sum += x[srcALen - srcBLen + 1] * y[0] */
      sum += (q63_t) * px++ * (*py++);

      /* Decrement the loop counter */
      k--;
    }

    /* If the count is not a multiple of 4, compute any remaining MACs here.
     ** No loop unrolling is used. */
    k = count % 0x4U;

    while (k > 0U)
    {
      /* Perform the multiply-accumulates */
      sum += (q63_t) * px++ * (*py++);

      /* Decrement the loop counter */
      k--;
    }

    /* Store the result in the accumulator in the destination buffer. */
    *pOut = (q31_t) (sum >> 31);
    /* Destination pointer is updated according to the address modifier, inc */
    pOut += inc;

    /* Update the inputA and inputB pointers for next MAC calculation */
    px = ++pSrc1;
    py = pIn2;

    /* Decrement the MAC count */
    count--;

    /* Decrement the loop counter */
    blockSize3--;
  }

#else

  /* Run the below code for Cortex-M0 */

  q31_t *pIn1 = pSrcA;                           /* inputA pointer               */
  q31_t *pIn2 = pSrcB + (srcBLen - 1U);          /* inputB pointer               */
  q63_t sum;                                     /* Accumulators                  */
  uint32_t i = 0U, j;                            /* loop counters */
  uint32_t inv = 0U;                             /* Reverse order flag */
  uint32_t tot = 0U;                             /* Length */

  /* The algorithm implementation is based on the lengths of the inputs. */
  /* srcB is always made to slide across srcA. */
  /* So srcBLen is always considered as shorter or equal to srcALen */
  /* But CORR(x, y) is reverse of CORR(y, x) */
  /* So, when srcBLen > srcALen, output pointer is made to point to the end of the output buffer */
  /* and a varaible, inv is set to 1 */
  /* If lengths are not equal then zero pad has to be done to  make the two
   * inputs of same length. But to improve the performance, we include zeroes
   * in the output instead of zero padding either of the the inputs*/
  /* If srcALen > srcBLen, (srcALen - srcBLen) zeroes has to included in the
   * starting of the output buffer */
  /* If srcALen < srcBLen, (srcALen - srcBLen) zeroes has to included in the
   * ending of the output buffer */
  /* Once the zero padding is done the remaining of the output is calcualted
   * using correlation but with the shorter signal time shifted. */

  /* Calculate the length of the remaining sequence */
  tot = ((srcALen + srcBLen) - 2U);

  if (srcALen > srcBLen)
  {
    /* Calculating the number of zeros to be padded to the output */
    j = srcALen - srcBLen;

    /* Initialise the pointer after zero padding */
    pDst += j;
  }

  else if (srcALen < srcBLen)
  {
    /* Initialization to inputB pointer */
    pIn1 = pSrcB;

    /* Initialization to the end of inputA pointer */
    pIn2 = pSrcA + (srcALen - 1U);

    /* Initialisation of the pointer after zero padding */
    pDst = pDst + tot;

    /* Swapping the lengths */
    j = srcALen;
    srcALen = srcBLen;
    srcBLen = j;

    /* Setting the reverse flag */
    inv = 1;

  }

  /* Loop to calculate correlation for output length number of times */
  for (i = 0U; i <= tot; i++)
  {
    /* Initialize sum with zero to carry on MAC operations */
    sum = 0;

    /* Loop to perform MAC operations according to correlation equation */
    for (j = 0U; j <= i; j++)
    {
      /* Check the array limitations */
      if ((((i - j) < srcBLen) && (j < srcALen)))
      {
        /* z[i] += x[i-j] * y[j] */
        sum += ((q63_t) pIn1[j] * pIn2[-((int32_t) i - j)]);
      }
    }
    /* Store the output in the destination buffer */
    if (inv == 1)
      *pDst-- = (q31_t) (sum >> 31U);
    else
      *pDst++ = (q31_t) (sum >> 31U);
  }

#endif /*   #if defined (ARM_MATH_DSP) */

}

/**
 * @} end of Corr group
 */