pigweed / third_party / github / STMicroelectronics / cmsis_core / refs/heads/cm4 / . / DSP / Source / FilteringFunctions / arm_correlate_f32.c

/* ---------------------------------------------------------------------- | |

* Project: CMSIS DSP Library | |

* Title: arm_correlate_f32.c | |

* Description: Correlation of floating-point sequences | |

* | |

* $Date: 18. March 2019 | |

* $Revision: V1.6.0 | |

* | |

* Target Processor: Cortex-M cores | |

* -------------------------------------------------------------------- */ | |

/* | |

* Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved. | |

* | |

* SPDX-License-Identifier: Apache-2.0 | |

* | |

* Licensed under the Apache License, Version 2.0 (the License); you may | |

* not use this file except in compliance with the License. | |

* You may obtain a copy of the License at | |

* | |

* www.apache.org/licenses/LICENSE-2.0 | |

* | |

* Unless required by applicable law or agreed to in writing, software | |

* distributed under the License is distributed on an AS IS BASIS, WITHOUT | |

* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |

* See the License for the specific language governing permissions and | |

* limitations under the License. | |

*/ | |

#include "arm_math.h" | |

/** | |

@ingroup groupFilters | |

*/ | |

/** | |

@defgroup Corr Correlation | |

Correlation is a mathematical operation that is similar to convolution. | |

As with convolution, correlation uses two signals to produce a third signal. | |

The underlying algorithms in correlation and convolution are identical except that one of the inputs is flipped in convolution. | |

Correlation is commonly used to measure the similarity between two signals. | |

It has applications in pattern recognition, cryptanalysis, and searching. | |

The CMSIS library provides correlation functions for Q7, Q15, Q31 and floating-point data types. | |

Fast versions of the Q15 and Q31 functions are also provided. | |

@par Algorithm | |

Let <code>a[n]</code> and <code>b[n]</code> be sequences of length <code>srcALen</code> and <code>srcBLen</code> samples respectively. | |

The convolution of the two signals is denoted by | |

<pre> | |

c[n] = a[n] * b[n] | |

</pre> | |

In correlation, one of the signals is flipped in time | |

<pre> | |

c[n] = a[n] * b[-n] | |

</pre> | |

@par | |

and this is mathematically defined as | |

\image html CorrelateEquation.gif | |

@par | |

The <code>pSrcA</code> points to the first input vector of length <code>srcALen</code> and <code>pSrcB</code> points to the second input vector of length <code>srcBLen</code>. | |

The result <code>c[n]</code> is of length <code>2 * max(srcALen, srcBLen) - 1</code> and is defined over the interval <code>n=0, 1, 2, ..., (2 * max(srcALen, srcBLen) - 2)</code>. | |

The output result is written to <code>pDst</code> and the calling function must allocate <code>2 * max(srcALen, srcBLen) - 1</code> words for the result. | |

@note | |

The <code>pDst</code> should be initialized to all zeros before being used. | |

@par Fixed-Point Behavior | |

Correlation requires summing up a large number of intermediate products. | |

As such, the Q7, Q15, and Q31 functions run a risk of overflow and saturation. | |

Refer to the function specific documentation below for further details of the particular algorithm used. | |

@par Fast Versions | |

Fast versions are supported for Q31 and Q15. Cycles for Fast versions are less compared to Q31 and Q15 of correlate and the design requires | |

the input signals should be scaled down to avoid intermediate overflows. | |

@par Opt Versions | |

Opt versions are supported for Q15 and Q7. Design uses internal scratch buffer for getting good optimisation. | |

These versions are optimised in cycles and consumes more memory (Scratch memory) compared to Q15 and Q7 versions of correlate | |

*/ | |

/** | |

@addtogroup Corr | |

@{ | |

*/ | |

/** | |

@brief Correlation of floating-point sequences. | |

@param[in] pSrcA points to the first input sequence | |

@param[in] srcALen length of the first input sequence | |

@param[in] pSrcB points to the second input sequence | |

@param[in] srcBLen length of the second input sequence | |

@param[out] pDst points to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1. | |

@return none | |

*/ | |

void arm_correlate_f32( | |

const float32_t * pSrcA, | |

uint32_t srcALen, | |

const float32_t * pSrcB, | |

uint32_t srcBLen, | |

float32_t * pDst) | |

{ | |

#if (1) | |

//#if !defined(ARM_MATH_CM0_FAMILY) | |

const float32_t *pIn1; /* InputA pointer */ | |

const float32_t *pIn2; /* InputB pointer */ | |

float32_t *pOut = pDst; /* Output pointer */ | |

const float32_t *px; /* Intermediate inputA pointer */ | |

const float32_t *py; /* Intermediate inputB pointer */ | |

const float32_t *pSrc1; | |

float32_t sum; | |

uint32_t blockSize1, blockSize2, blockSize3; /* Loop counters */ | |

uint32_t j, k, count, blkCnt; /* Loop counters */ | |

uint32_t outBlockSize; /* Loop counter */ | |

int32_t inc = 1; /* Destination address modifier */ | |

#if defined (ARM_MATH_LOOPUNROLL) || defined (ARM_MATH_NEON) | |

float32_t acc0, acc1, acc2, acc3; /* Accumulators */ | |

float32_t x0, x1, x2, x3, c0; /* temporary variables for holding input and coefficient values */ | |

#endif | |

/* The algorithm implementation is based on the lengths of the inputs. */ | |

/* srcB is always made to slide across srcA. */ | |

/* So srcBLen is always considered as shorter or equal to srcALen */ | |

/* But CORR(x, y) is reverse of CORR(y, x) */ | |

/* So, when srcBLen > srcALen, output pointer is made to point to the end of the output buffer */ | |

/* and the destination pointer modifier, inc is set to -1 */ | |

/* If srcALen > srcBLen, zero pad has to be done to srcB to make the two inputs of same length */ | |

/* But to improve the performance, | |

* we assume zeroes in the output instead of zero padding either of the the inputs*/ | |

/* If srcALen > srcBLen, | |

* (srcALen - srcBLen) zeroes has to included in the starting of the output buffer */ | |

/* If srcALen < srcBLen, | |

* (srcALen - srcBLen) zeroes has to included in the ending of the output buffer */ | |

if (srcALen >= srcBLen) | |

{ | |

/* Initialization of inputA pointer */ | |

pIn1 = pSrcA; | |

/* Initialization of inputB pointer */ | |

pIn2 = pSrcB; | |

/* Number of output samples is calculated */ | |

outBlockSize = (2U * srcALen) - 1U; | |

/* When srcALen > srcBLen, zero padding has to be done to srcB | |

* to make their lengths equal. | |

* Instead, (outBlockSize - (srcALen + srcBLen - 1)) | |

* number of output samples are made zero */ | |

j = outBlockSize - (srcALen + (srcBLen - 1U)); | |

/* Updating the pointer position to non zero value */ | |

pOut += j; | |

} | |

else | |

{ | |

/* Initialization of inputA pointer */ | |

pIn1 = pSrcB; | |

/* Initialization of inputB pointer */ | |

pIn2 = pSrcA; | |

/* srcBLen is always considered as shorter or equal to srcALen */ | |

j = srcBLen; | |

srcBLen = srcALen; | |

srcALen = j; | |

/* CORR(x, y) = Reverse order(CORR(y, x)) */ | |

/* Hence set the destination pointer to point to the last output sample */ | |

pOut = pDst + ((srcALen + srcBLen) - 2U); | |

/* Destination address modifier is set to -1 */ | |

inc = -1; | |

} | |

/* The function is internally | |

* divided into three stages according to the number of multiplications that has to be | |

* taken place between inputA samples and inputB samples. In the first stage of the | |

* algorithm, the multiplications increase by one for every iteration. | |

* In the second stage of the algorithm, srcBLen number of multiplications are done. | |

* In the third stage of the algorithm, the multiplications decrease by one | |

* for every iteration. */ | |

/* The algorithm is implemented in three stages. | |

The loop counters of each stage is initiated here. */ | |

blockSize1 = srcBLen - 1U; | |

blockSize2 = srcALen - (srcBLen - 1U); | |

blockSize3 = blockSize1; | |

/* -------------------------- | |

* Initializations of stage1 | |

* -------------------------*/ | |

/* sum = x[0] * y[srcBlen - 1] | |

* sum = x[0] * y[srcBlen-2] + x[1] * y[srcBlen - 1] | |

* .... | |

* sum = x[0] * y[0] + x[1] * y[1] +...+ x[srcBLen - 1] * y[srcBLen - 1] | |

*/ | |

/* In this stage the MAC operations are increased by 1 for every iteration. | |

The count variable holds the number of MAC operations performed */ | |

count = 1U; | |

/* Working pointer of inputA */ | |

px = pIn1; | |

/* Working pointer of inputB */ | |

pSrc1 = pIn2 + (srcBLen - 1U); | |

py = pSrc1; | |

/* ------------------------ | |

* Stage1 process | |

* ----------------------*/ | |

/* The first stage starts here */ | |

while (blockSize1 > 0U) | |

{ | |

/* Accumulator is made zero for every iteration */ | |

sum = 0.0f; | |

#if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) | |

/* Loop unrolling: Compute 4 outputs at a time */ | |

k = count >> 2U; | |

#if defined(ARM_MATH_NEON) | |

float32x4_t x,y; | |

float32x4_t res = vdupq_n_f32(0) ; | |

float32x2_t accum = vdup_n_f32(0); | |

while (k > 0U) | |

{ | |

x = vld1q_f32(px); | |

y = vld1q_f32(py); | |

res = vmlaq_f32(res,x, y); | |

px += 4; | |

py += 4; | |

/* Decrement the loop counter */ | |

k--; | |

} | |

accum = vpadd_f32(vget_low_f32(res), vget_high_f32(res)); | |

sum += accum[0] + accum[1]; | |

k = count & 0x3; | |

#else | |

/* First part of the processing with loop unrolling. Compute 4 MACs at a time. | |

** a second loop below computes MACs for the remaining 1 to 3 samples. */ | |

while (k > 0U) | |

{ | |

/* x[0] * y[srcBLen - 4] */ | |

sum += *px++ * *py++; | |

/* x[1] * y[srcBLen - 3] */ | |

sum += *px++ * *py++; | |

/* x[2] * y[srcBLen - 2] */ | |

sum += *px++ * *py++; | |

/* x[3] * y[srcBLen - 1] */ | |

sum += *px++ * *py++; | |

/* Decrement loop counter */ | |

k--; | |

} | |

/* Loop unrolling: Compute remaining outputs */ | |

k = count % 0x4U; | |

#endif /* #if defined(ARM_MATH_NEON) */ | |

#else | |

/* Initialize k with number of samples */ | |

k = count; | |

#endif /* #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) */ | |

while (k > 0U) | |

{ | |

/* Perform the multiply-accumulate */ | |

/* x[0] * y[srcBLen - 1] */ | |

sum += *px++ * *py++; | |

/* Decrement loop counter */ | |

k--; | |

} | |

/* Store the result in the accumulator in the destination buffer. */ | |

*pOut = sum; | |

/* Destination pointer is updated according to the address modifier, inc */ | |

pOut += inc; | |

/* Update the inputA and inputB pointers for next MAC calculation */ | |

py = pSrc1 - count; | |

px = pIn1; | |

/* Increment MAC count */ | |

count++; | |

/* Decrement loop counter */ | |

blockSize1--; | |

} | |

/* -------------------------- | |

* Initializations of stage2 | |

* ------------------------*/ | |

/* sum = x[0] * y[0] + x[1] * y[1] +...+ x[srcBLen-1] * y[srcBLen-1] | |

* sum = x[1] * y[0] + x[2] * y[1] +...+ x[srcBLen] * y[srcBLen-1] | |

* .... | |

* sum = x[srcALen-srcBLen-2] * y[0] + x[srcALen-srcBLen-1] * y[1] +...+ x[srcALen-1] * y[srcBLen-1] | |

*/ | |

/* Working pointer of inputA */ | |

px = pIn1; | |

/* Working pointer of inputB */ | |

py = pIn2; | |

/* count is index by which the pointer pIn1 to be incremented */ | |

count = 0U; | |

/* ------------------- | |

* Stage2 process | |

* ------------------*/ | |

/* Stage2 depends on srcBLen as in this stage srcBLen number of MACS are performed. | |

* So, to loop unroll over blockSize2, | |

* srcBLen should be greater than or equal to 4 */ | |

if (srcBLen >= 4U) | |

{ | |

#if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) | |

/* Loop unrolling: Compute 4 outputs at a time */ | |

blkCnt = blockSize2 >> 2U; | |

#if defined(ARM_MATH_NEON) | |

float32x4_t c; | |

float32x4_t x1v; | |

float32x4_t x2v; | |

uint32x4_t x1v_u; | |

uint32x4_t x2v_u; | |

float32x4_t x; | |

uint32x4_t x_u; | |

float32x4_t res = vdupq_n_f32(0) ; | |

#endif /* #if defined(ARM_MATH_NEON) */ | |

while (blkCnt > 0U) | |

{ | |

/* Set all accumulators to zero */ | |

acc0 = 0.0f; | |

acc1 = 0.0f; | |

acc2 = 0.0f; | |

acc3 = 0.0f; | |

#if defined(ARM_MATH_NEON) | |

/* Compute 4 MACs simultaneously. */ | |

k = srcBLen >> 2U; | |

res = vdupq_n_f32(0) ; | |

x1v = vld1q_f32(px); | |

px += 4; | |

do | |

{ | |

x2v = vld1q_f32(px); | |

c = vld1q_f32(py); | |

py += 4; | |

x = x1v; | |

res = vmlaq_n_f32(res,x,c[0]); | |

x = vextq_f32(x1v,x2v,1); | |

res = vmlaq_n_f32(res,x,c[1]); | |

x = vextq_f32(x1v,x2v,2); | |

res = vmlaq_n_f32(res,x,c[2]); | |

x = vextq_f32(x1v,x2v,3); | |

res = vmlaq_n_f32(res,x,c[3]); | |

x1v = x2v; | |

px+=4; | |

x2v = vld1q_f32(px); | |

} while (--k); | |

/* If the srcBLen is not a multiple of 4, compute any remaining MACs here. | |

** No loop unrolling is used. */ | |

k = srcBLen & 0x3; | |

while (k > 0U) | |

{ | |

/* Read y[srcBLen - 5] sample */ | |

c0 = *(py++); | |

res = vmlaq_n_f32(res,x1v,c0); | |

/* Reuse the present samples for the next MAC */ | |

x1v[0] = x1v[1]; | |

x1v[1] = x1v[2]; | |

x1v[2] = x1v[3]; | |

x1v[3] = *(px++); | |

/* Decrement the loop counter */ | |

k--; | |

} | |

px-=1; | |

acc0 = res[0]; | |

acc1 = res[1]; | |

acc2 = res[2]; | |

acc3 = res[3]; | |

#else | |

/* read x[0], x[1], x[2] samples */ | |

x0 = *px++; | |

x1 = *px++; | |

x2 = *px++; | |

/* Apply loop unrolling and compute 4 MACs simultaneously. */ | |

k = srcBLen >> 2U; | |

/* First part of the processing with loop unrolling. Compute 4 MACs at a time. | |

** a second loop below computes MACs for the remaining 1 to 3 samples. */ | |

do | |

{ | |

/* Read y[0] sample */ | |

c0 = *(py++); | |

/* Read x[3] sample */ | |

x3 = *(px++); | |

/* Perform the multiply-accumulate */ | |

/* acc0 += x[0] * y[0] */ | |

acc0 += x0 * c0; | |

/* acc1 += x[1] * y[0] */ | |

acc1 += x1 * c0; | |

/* acc2 += x[2] * y[0] */ | |

acc2 += x2 * c0; | |

/* acc3 += x[3] * y[0] */ | |

acc3 += x3 * c0; | |

/* Read y[1] sample */ | |

c0 = *(py++); | |

/* Read x[4] sample */ | |

x0 = *(px++); | |

/* Perform the multiply-accumulate */ | |

/* acc0 += x[1] * y[1] */ | |

acc0 += x1 * c0; | |

/* acc1 += x[2] * y[1] */ | |

acc1 += x2 * c0; | |

/* acc2 += x[3] * y[1] */ | |

acc2 += x3 * c0; | |

/* acc3 += x[4] * y[1] */ | |

acc3 += x0 * c0; | |

/* Read y[2] sample */ | |

c0 = *(py++); | |

/* Read x[5] sample */ | |

x1 = *(px++); | |

/* Perform the multiply-accumulate */ | |

/* acc0 += x[2] * y[2] */ | |

acc0 += x2 * c0; | |

/* acc1 += x[3] * y[2] */ | |

acc1 += x3 * c0; | |

/* acc2 += x[4] * y[2] */ | |

acc2 += x0 * c0; | |

/* acc3 += x[5] * y[2] */ | |

acc3 += x1 * c0; | |

/* Read y[3] sample */ | |

c0 = *(py++); | |

/* Read x[6] sample */ | |

x2 = *(px++); | |

/* Perform the multiply-accumulate */ | |

/* acc0 += x[3] * y[3] */ | |

acc0 += x3 * c0; | |

/* acc1 += x[4] * y[3] */ | |

acc1 += x0 * c0; | |

/* acc2 += x[5] * y[3] */ | |

acc2 += x1 * c0; | |

/* acc3 += x[6] * y[3] */ | |

acc3 += x2 * c0; | |

} while (--k); | |

/* If the srcBLen is not a multiple of 4, compute any remaining MACs here. | |

** No loop unrolling is used. */ | |

k = srcBLen % 0x4U; | |

while (k > 0U) | |

{ | |

/* Read y[4] sample */ | |

c0 = *(py++); | |

/* Read x[7] sample */ | |

x3 = *(px++); | |

/* Perform the multiply-accumulate */ | |

/* acc0 += x[4] * y[4] */ | |

acc0 += x0 * c0; | |

/* acc1 += x[5] * y[4] */ | |

acc1 += x1 * c0; | |

/* acc2 += x[6] * y[4] */ | |

acc2 += x2 * c0; | |

/* acc3 += x[7] * y[4] */ | |

acc3 += x3 * c0; | |

/* Reuse the present samples for the next MAC */ | |

x0 = x1; | |

x1 = x2; | |

x2 = x3; | |

/* Decrement the loop counter */ | |

k--; | |

} | |

#endif /* #if defined(ARM_MATH_NEON) */ | |

/* Store the result in the accumulator in the destination buffer. */ | |

*pOut = acc0; | |

/* Destination pointer is updated according to the address modifier, inc */ | |

pOut += inc; | |

*pOut = acc1; | |

pOut += inc; | |

*pOut = acc2; | |

pOut += inc; | |

*pOut = acc3; | |

pOut += inc; | |

/* Increment the pointer pIn1 index, count by 4 */ | |

count += 4U; | |

/* Update the inputA and inputB pointers for next MAC calculation */ | |

px = pIn1 + count; | |

py = pIn2; | |

/* Decrement loop counter */ | |

blkCnt--; | |

} | |

/* Loop unrolling: Compute remaining outputs */ | |

blkCnt = blockSize2 % 0x4U; | |

#else | |

/* Initialize blkCnt with number of samples */ | |

blkCnt = blockSize2; | |

#endif /* #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) */ | |

while (blkCnt > 0U) | |

{ | |

/* Accumulator is made zero for every iteration */ | |

sum = 0.0f; | |

#if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) | |

/* Loop unrolling: Compute 4 outputs at a time */ | |

k = srcBLen >> 2U; | |

#if defined(ARM_MATH_NEON) | |

float32x4_t x,y; | |

float32x4_t res = vdupq_n_f32(0) ; | |

float32x2_t accum = vdup_n_f32(0); | |

while (k > 0U) | |

{ | |

x = vld1q_f32(px); | |

y = vld1q_f32(py); | |

res = vmlaq_f32(res,x, y); | |

px += 4; | |

py += 4; | |

/* Decrement the loop counter */ | |

k--; | |

} | |

accum = vpadd_f32(vget_low_f32(res), vget_high_f32(res)); | |

sum += accum[0] + accum[1]; | |

#else | |

/* First part of the processing with loop unrolling. Compute 4 MACs at a time. | |

** a second loop below computes MACs for the remaining 1 to 3 samples. */ | |

while (k > 0U) | |

{ | |

/* Perform the multiply-accumulate */ | |

sum += *px++ * *py++; | |

sum += *px++ * *py++; | |

sum += *px++ * *py++; | |

sum += *px++ * *py++; | |

/* Decrement loop counter */ | |

k--; | |

} | |

#endif /* #if defined(ARM_MATH_NEON) */ | |

/* If the srcBLen is not a multiple of 4, compute any remaining MACs here. | |

** No loop unrolling is used. */ | |

k = srcBLen % 0x4U; | |

#else | |

/* Initialize blkCnt with number of samples */ | |

k = srcBLen; | |

#endif /* #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) */ | |

while (k > 0U) | |

{ | |

/* Perform the multiply-accumulate */ | |

sum += *px++ * *py++; | |

/* Decrement the loop counter */ | |

k--; | |

} | |

/* Store the result in the accumulator in the destination buffer. */ | |

*pOut = sum; | |

/* Destination pointer is updated according to the address modifier, inc */ | |

pOut += inc; | |

/* Increment the pointer pIn1 index, count by 1 */ | |

count++; | |

/* Update the inputA and inputB pointers for next MAC calculation */ | |

px = pIn1 + count; | |

py = pIn2; | |

/* Decrement the loop counter */ | |

blkCnt--; | |

} | |

} | |

else | |

{ | |

/* If the srcBLen is not a multiple of 4, | |

* the blockSize2 loop cannot be unrolled by 4 */ | |

blkCnt = blockSize2; | |

while (blkCnt > 0U) | |

{ | |

/* Accumulator is made zero for every iteration */ | |

sum = 0.0f; | |

/* Loop over srcBLen */ | |

k = srcBLen; | |

while (k > 0U) | |

{ | |

/* Perform the multiply-accumulate */ | |

sum += *px++ * *py++; | |

/* Decrement the loop counter */ | |

k--; | |

} | |

/* Store the result in the accumulator in the destination buffer. */ | |

*pOut = sum; | |

/* Destination pointer is updated according to the address modifier, inc */ | |

pOut += inc; | |

/* Increment the pointer pIn1 index, count by 1 */ | |

count++; | |

/* Update the inputA and inputB pointers for next MAC calculation */ | |

px = pIn1 + count; | |

py = pIn2; | |

/* Decrement the loop counter */ | |

blkCnt--; | |

} | |

} | |

/* -------------------------- | |

* Initializations of stage3 | |

* -------------------------*/ | |

/* sum += x[srcALen-srcBLen+1] * y[0] + x[srcALen-srcBLen+2] * y[1] +...+ x[srcALen-1] * y[srcBLen-1] | |

* sum += x[srcALen-srcBLen+2] * y[0] + x[srcALen-srcBLen+3] * y[1] +...+ x[srcALen-1] * y[srcBLen-1] | |

* .... | |

* sum += x[srcALen-2] * y[0] + x[srcALen-1] * y[1] | |

* sum += x[srcALen-1] * y[0] | |

*/ | |

/* In this stage the MAC operations are decreased by 1 for every iteration. | |

The count variable holds the number of MAC operations performed */ | |

count = srcBLen - 1U; | |

/* Working pointer of inputA */ | |

pSrc1 = pIn1 + (srcALen - (srcBLen - 1U)); | |

px = pSrc1; | |

/* Working pointer of inputB */ | |

py = pIn2; | |

/* ------------------- | |

* Stage3 process | |

* ------------------*/ | |

while (blockSize3 > 0U) | |

{ | |

/* Accumulator is made zero for every iteration */ | |

sum = 0.0f; | |

#if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) | |

/* Loop unrolling: Compute 4 outputs at a time */ | |

k = count >> 2U; | |

#if defined(ARM_MATH_NEON) | |

float32x4_t x,y; | |

float32x4_t res = vdupq_n_f32(0) ; | |

float32x2_t accum = vdup_n_f32(0); | |

while (k > 0U) | |

{ | |

x = vld1q_f32(px); | |

y = vld1q_f32(py); | |

res = vmlaq_f32(res,x, y); | |

px += 4; | |

py += 4; | |

/* Decrement the loop counter */ | |

k--; | |

} | |

accum = vpadd_f32(vget_low_f32(res), vget_high_f32(res)); | |

sum += accum[0] + accum[1]; | |

#else | |

/* First part of the processing with loop unrolling. Compute 4 MACs at a time. | |

** a second loop below computes MACs for the remaining 1 to 3 samples. */ | |

while (k > 0U) | |

{ | |

/* Perform the multiply-accumulate */ | |

/* sum += x[srcALen - srcBLen + 4] * y[3] */ | |

sum += *px++ * *py++; | |

/* sum += x[srcALen - srcBLen + 3] * y[2] */ | |

sum += *px++ * *py++; | |

/* sum += x[srcALen - srcBLen + 2] * y[1] */ | |

sum += *px++ * *py++; | |

/* sum += x[srcALen - srcBLen + 1] * y[0] */ | |

sum += *px++ * *py++; | |

/* Decrement loop counter */ | |

k--; | |

} | |

#endif /* #if defined (ARM_MATH_NEON) */ | |

/* Loop unrolling: Compute remaining outputs */ | |

k = count % 0x4U; | |

#else | |

/* Initialize blkCnt with number of samples */ | |

k = count; | |

#endif /* #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) */ | |

while (k > 0U) | |

{ | |

/* Perform the multiply-accumulate */ | |

sum += *px++ * *py++; | |

/* Decrement loop counter */ | |

k--; | |

} | |

/* Store the result in the accumulator in the destination buffer. */ | |

*pOut = sum; | |

/* Destination pointer is updated according to the address modifier, inc */ | |

pOut += inc; | |

/* Update the inputA and inputB pointers for next MAC calculation */ | |

px = ++pSrc1; | |

py = pIn2; | |

/* Decrement MAC count */ | |

count--; | |

/* Decrement the loop counter */ | |

blockSize3--; | |

} | |

#else | |

/* alternate version for CM0_FAMILY */ | |

const float32_t *pIn1 = pSrcA; /* inputA pointer */ | |

const float32_t *pIn2 = pSrcB + (srcBLen - 1U); /* inputB pointer */ | |

float32_t sum; /* Accumulator */ | |

uint32_t i = 0U, j; /* Loop counters */ | |

uint32_t inv = 0U; /* Reverse order flag */ | |

uint32_t tot = 0U; /* Length */ | |

/* The algorithm implementation is based on the lengths of the inputs. */ | |

/* srcB is always made to slide across srcA. */ | |

/* So srcBLen is always considered as shorter or equal to srcALen */ | |

/* But CORR(x, y) is reverse of CORR(y, x) */ | |

/* So, when srcBLen > srcALen, output pointer is made to point to the end of the output buffer */ | |

/* and a varaible, inv is set to 1 */ | |

/* If lengths are not equal then zero pad has to be done to make the two | |

* inputs of same length. But to improve the performance, we assume zeroes | |

* in the output instead of zero padding either of the the inputs*/ | |

/* If srcALen > srcBLen, (srcALen - srcBLen) zeroes has to included in the | |

* starting of the output buffer */ | |

/* If srcALen < srcBLen, (srcALen - srcBLen) zeroes has to included in the | |

* ending of the output buffer */ | |

/* Once the zero padding is done the remaining of the output is calcualted | |

* using convolution but with the shorter signal time shifted. */ | |

/* Calculate the length of the remaining sequence */ | |

tot = ((srcALen + srcBLen) - 2U); | |

if (srcALen > srcBLen) | |

{ | |

/* Calculating the number of zeros to be padded to the output */ | |

j = srcALen - srcBLen; | |

/* Initialise the pointer after zero padding */ | |

pDst += j; | |

} | |

else if (srcALen < srcBLen) | |

{ | |

/* Initialization to inputB pointer */ | |

pIn1 = pSrcB; | |

/* Initialization to the end of inputA pointer */ | |

pIn2 = pSrcA + (srcALen - 1U); | |

/* Initialisation of the pointer after zero padding */ | |

pDst = pDst + tot; | |

/* Swapping the lengths */ | |

j = srcALen; | |

srcALen = srcBLen; | |

srcBLen = j; | |

/* Setting the reverse flag */ | |

inv = 1; | |

} | |

/* Loop to calculate convolution for output length number of times */ | |

for (i = 0U; i <= tot; i++) | |

{ | |

/* Initialize sum with zero to carry out MAC operations */ | |

sum = 0.0f; | |

/* Loop to perform MAC operations according to convolution equation */ | |

for (j = 0U; j <= i; j++) | |

{ | |

/* Check the array limitations */ | |

if ((((i - j) < srcBLen) && (j < srcALen))) | |

{ | |

/* z[i] += x[i-j] * y[j] */ | |

sum += pIn1[j] * pIn2[-((int32_t) i - j)]; | |

} | |

} | |

/* Store the output in the destination buffer */ | |

if (inv == 1) | |

*pDst-- = sum; | |

else | |

*pDst++ = sum; | |

} | |

#endif /* #if !defined(ARM_MATH_CM0_FAMILY) */ | |

} | |

/** | |

@} end of Corr group | |

*/ |