diff --git a/Include/stm32l010x4.h b/Include/stm32l010x4.h
index db98708..1def135 100644
--- a/Include/stm32l010x4.h
+++ b/Include/stm32l010x4.h
@@ -14,7 +14,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright(c) 2018 STMicroelectronics.
+  * <h2><center>&copy; Copyright(c) 2016 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
@@ -2972,7 +2972,10 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
+/* Note: No specific macro feature on this device */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -4644,13 +4647,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5703,9 +5700,6 @@
 #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
                                          ((INSTANCE) == TIM21))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l010x6.h b/Include/stm32l010x6.h
index 6e7e2ca..56ad96a 100644
--- a/Include/stm32l010x6.h
+++ b/Include/stm32l010x6.h
@@ -14,7 +14,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright(c) 2018 STMicroelectronics.
+  * <h2><center>&copy; Copyright(c) 2016 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
@@ -2981,7 +2981,9 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
 
 /********************  Bit definition for RCC_CR register  ********************/
@@ -4697,13 +4699,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5760,9 +5756,6 @@
 #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
                                          ((INSTANCE) == TIM21))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l010x8.h b/Include/stm32l010x8.h
index 6e0515d..1fc6719 100644
--- a/Include/stm32l010x8.h
+++ b/Include/stm32l010x8.h
@@ -14,7 +14,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright(c) 2018 STMicroelectronics.
+  * <h2><center>&copy; Copyright(c) 2016 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
@@ -2980,7 +2980,9 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
 
 /********************  Bit definition for RCC_CR register  ********************/
@@ -4690,13 +4692,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5755,9 +5751,6 @@
 #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
                                          ((INSTANCE) == TIM21))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l010xb.h b/Include/stm32l010xb.h
index 58fab12..005e8af 100644
--- a/Include/stm32l010xb.h
+++ b/Include/stm32l010xb.h
@@ -14,7 +14,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright(c) 2018 STMicroelectronics.
+  * <h2><center>&copy; Copyright(c) 2016 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
@@ -2988,7 +2988,9 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
 
 /********************  Bit definition for RCC_CR register  ********************/
@@ -4738,13 +4740,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5831,9 +5827,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l011xx.h b/Include/stm32l011xx.h
index 81071fc..60201f6 100644
--- a/Include/stm32l011xx.h
+++ b/Include/stm32l011xx.h
@@ -3081,7 +3081,10 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
+/* Note: No specific macro feature on this device */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -4771,13 +4774,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
 #define TIM_TIM2_REMAP_HSI_SUPPORT	     /*!<Support remap HSI on TIM2 */
-#endif
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5845,9 +5842,6 @@
 #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
                                          ((INSTANCE) == TIM21))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l021xx.h b/Include/stm32l021xx.h
index ff12ac3..a3b41e8 100644
--- a/Include/stm32l021xx.h
+++ b/Include/stm32l021xx.h
@@ -3209,7 +3209,10 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
+/* Note: No specific macro feature on this device */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -4908,13 +4911,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
 #define TIM_TIM2_REMAP_HSI_SUPPORT	     /*!<Support remap HSI on TIM2 */
-#endif
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5985,9 +5982,6 @@
 #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
                                          ((INSTANCE) == TIM21))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l031xx.h b/Include/stm32l031xx.h
index feb2ba0..ecfcf1d 100644
--- a/Include/stm32l031xx.h
+++ b/Include/stm32l031xx.h
@@ -3147,8 +3147,12 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -4893,13 +4897,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
 #define TIM_TIM2_REMAP_HSI_SUPPORT	     /*!<Support remap HSI on TIM2 */
-#endif
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -5989,9 +5987,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l041xx.h b/Include/stm32l041xx.h
index 988a5ed..01b2585 100644
--- a/Include/stm32l041xx.h
+++ b/Include/stm32l041xx.h
@@ -3275,8 +3275,12 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5030,13 +5034,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
 #define TIM_TIM2_REMAP_HSI_SUPPORT	     /*!<Support remap HSI on TIM2 */
-#endif
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -6129,9 +6127,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l051xx.h b/Include/stm32l051xx.h
index a573419..63810d9 100644
--- a/Include/stm32l051xx.h
+++ b/Include/stm32l051xx.h
@@ -3222,8 +3222,12 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF0_SUPPORT        /*!<Support MCO3 on Alternate Function AF2 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5047,13 +5051,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -6152,9 +6150,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l052xx.h b/Include/stm32l052xx.h
index 2596ae5..929be1a 100644
--- a/Include/stm32l052xx.h
+++ b/Include/stm32l052xx.h
@@ -3511,7 +3511,9 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
 
@@ -5448,13 +5450,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7229,9 +7225,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l053xx.h b/Include/stm32l053xx.h
index 1e28ead..7046d07 100644
--- a/Include/stm32l053xx.h
+++ b/Include/stm32l053xx.h
@@ -3653,9 +3653,13 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF0_SUPPORT        /*!<Support MCO3 on Alternate Function AF2 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5605,13 +5609,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7386,9 +7384,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l061xx.h b/Include/stm32l061xx.h
deleted file mode 100644
index 40d5ef8..0000000
--- a/Include/stm32l061xx.h
+++ /dev/null
@@ -1,6405 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32l061xx.h
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. 
-  *          This file contains all the peripheral register's definitions, bits 
-  *          definitions and memory mapping for stm32l061xx devices.  
-  *          
-  *          This file contains:
-  *           - Data structures and the address mapping for all peripherals
-  *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral's registers hardware
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright(c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32l061xx
-  * @{
-  */
-    
-#ifndef __STM32L061xx_H
-#define __STM32L061xx_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-  
-
-/** @addtogroup Configuration_section_for_CMSIS
-  * @{
-  */
-/**
-  * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals 
-  */
-#define __CM0PLUS_REV             0U /*!< Core Revision r0p0                            */
-#define __MPU_PRESENT             1U /*!< STM32L0xx  provides an MPU                    */
-#define __VTOR_PRESENT            1U /*!< Vector  Table  Register supported             */
-#define __NVIC_PRIO_BITS          2U /*!< STM32L0xx uses 2 Bits for the Priority Levels */
-#define __Vendor_SysTickConfig    0U /*!< Set to 1 if different SysTick Config is used  */
-
-/**
-  * @}
-  */
-   
-/** @addtogroup Peripheral_interrupt_number_definition
-  * @{
-  */
-   
-/**
- * @brief stm32l061xx Interrupt Number Definition, according to the selected device 
- *        in @ref Library_configuration_section 
- */
-
-/*!< Interrupt Number Definition */
-typedef enum
-{
-/******  Cortex-M0 Processor Exceptions Numbers ******************************************************/
-  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                */
-  HardFault_IRQn              = -13,    /*!< 3 Cortex-M0+ Hard Fault Interrupt                       */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0+ SV Call Interrupt                         */
-  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0+ Pend SV Interrupt                         */
-  SysTick_IRQn                = -1,     /*!< 15 Cortex-M0+ System Tick Interrupt                     */
-
-/******  STM32L-0 specific Interrupt Numbers *********************************************************/
-  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                               */
-  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detect Interrupt                  */
-  RTC_IRQn                    = 2,      /*!< RTC through EXTI Line Interrupt                         */
-  FLASH_IRQn                  = 3,      /*!< FLASH Interrupt                                         */
-  RCC_IRQn                    = 4,      /*!< RCC Interrupt                                           */
-  EXTI0_1_IRQn                = 5,      /*!< EXTI Line 0 and 1 Interrupts                            */
-  EXTI2_3_IRQn                = 6,      /*!< EXTI Line 2 and 3 Interrupts                            */
-  EXTI4_15_IRQn               = 7,      /*!< EXTI Line 4 to 15 Interrupts                            */
-  DMA1_Channel1_IRQn          = 9,      /*!< DMA1 Channel 1 Interrupt                                */
-  DMA1_Channel2_3_IRQn        = 10,     /*!< DMA1 Channel 2 and Channel 3 Interrupts                 */
-  DMA1_Channel4_5_6_7_IRQn    = 11,     /*!< DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 Interrupts */
-  ADC1_COMP_IRQn              = 12,     /*!< ADC1, COMP1 and COMP2 Interrupts                        */
-  LPTIM1_IRQn                 = 13,     /*!< LPTIM1 Interrupt                                        */
-  TIM2_IRQn                   = 15,     /*!< TIM2 Interrupt                                          */
-  TIM6_IRQn                   = 17,     /*!< TIM6  Interrupt                                         */
-  TIM21_IRQn                  = 20,     /*!< TIM21 Interrupt                                         */
-  TIM22_IRQn                  = 22,     /*!< TIM22 Interrupt                                         */
-  I2C1_IRQn                   = 23,     /*!< I2C1 Interrupt                                          */
-  I2C2_IRQn                   = 24,     /*!< I2C2 Interrupt                                          */
-  SPI1_IRQn                   = 25,     /*!< SPI1 Interrupt                                          */
-  SPI2_IRQn                   = 26,     /*!< SPI2 Interrupt                                          */
-  USART1_IRQn                 = 27,     /*!< USART1 Interrupt                                        */
-  USART2_IRQn                 = 28,     /*!< USART2 Interrupt                                        */
-  AES_LPUART1_IRQn            = 29,     /*!< AES and LPUART1 Interrupts                              */
-} IRQn_Type;
-
-/**
-  * @}
-  */
-
-#include "core_cm0plus.h"
-#include "system_stm32l0xx.h"
-#include <stdint.h>
-
-/** @addtogroup Peripheral_registers_structures
-  * @{
-  */   
-
-/** 
-  * @brief Analog to Digital Converter  
-  */
-
-typedef struct
-{
-  __IO uint32_t ISR;          /*!< ADC Interrupt and Status register,                          Address offset:0x00 */
-  __IO uint32_t IER;          /*!< ADC Interrupt Enable register,                              Address offset:0x04 */
-  __IO uint32_t CR;           /*!< ADC Control register,                                       Address offset:0x08 */
-  __IO uint32_t CFGR1;        /*!< ADC Configuration register 1,                               Address offset:0x0C */
-  __IO uint32_t CFGR2;        /*!< ADC Configuration register 2,                               Address offset:0x10 */
-  __IO uint32_t SMPR;         /*!< ADC Sampling time register,                                 Address offset:0x14 */
-  uint32_t   RESERVED1;       /*!< Reserved,                                                                  0x18 */
-  uint32_t   RESERVED2;       /*!< Reserved,                                                                  0x1C */
-  __IO uint32_t TR;           /*!< ADC watchdog threshold register,                            Address offset:0x20 */
-  uint32_t   RESERVED3;       /*!< Reserved,                                                                  0x24 */
-  __IO uint32_t CHSELR;       /*!< ADC channel selection register,                             Address offset:0x28 */
-  uint32_t   RESERVED4[5];    /*!< Reserved,                                                                  0x2C */
-  __IO uint32_t DR;           /*!< ADC data register,                                          Address offset:0x40 */
-  uint32_t   RESERVED5[28];   /*!< Reserved,                                                           0x44 - 0xB0 */
-  __IO uint32_t CALFACT;      /*!< ADC data register,                                          Address offset:0xB4 */
-} ADC_TypeDef;
-
-typedef struct
-{
-  __IO uint32_t CCR;
-} ADC_Common_TypeDef;
-
-/** 
-  * @brief AES hardware accelerator
-  */
-
-typedef struct
-{
-  __IO uint32_t CR;      /*!< AES control register,                        Address offset: 0x00 */
-  __IO uint32_t SR;      /*!< AES status register,                         Address offset: 0x04 */
-  __IO uint32_t DINR;    /*!< AES data input register,                     Address offset: 0x08 */
-  __IO uint32_t DOUTR;   /*!< AES data output register,                    Address offset: 0x0C */
-  __IO uint32_t KEYR0;   /*!< AES key register 0,                          Address offset: 0x10 */
-  __IO uint32_t KEYR1;   /*!< AES key register 1,                          Address offset: 0x14 */
-  __IO uint32_t KEYR2;   /*!< AES key register 2,                          Address offset: 0x18 */
-  __IO uint32_t KEYR3;   /*!< AES key register 3,                          Address offset: 0x1C */
-  __IO uint32_t IVR0;    /*!< AES initialization vector register 0,        Address offset: 0x20 */
-  __IO uint32_t IVR1;    /*!< AES initialization vector register 1,        Address offset: 0x24 */
-  __IO uint32_t IVR2;    /*!< AES initialization vector register 2,        Address offset: 0x28 */
-  __IO uint32_t IVR3;    /*!< AES initialization vector register 3,        Address offset: 0x2C */
-} AES_TypeDef;
-
-/**
-  * @brief Comparator 
-  */
-
-typedef struct
-{
-  __IO uint32_t CSR;     /*!< COMP comparator control and status register, Address offset: 0x18 */
-} COMP_TypeDef;
-
-typedef struct
-{
-  __IO uint32_t CSR;         /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
-} COMP_Common_TypeDef;
-
-
-/**
-* @brief CRC calculation unit
-*/
-
-typedef struct
-{
-__IO uint32_t DR;            /*!< CRC Data register,                            Address offset: 0x00 */
-__IO uint8_t IDR;            /*!< CRC Independent data register,                Address offset: 0x04 */
-uint8_t RESERVED0;           /*!< Reserved,                                                     0x05 */
-uint16_t RESERVED1;          /*!< Reserved,                                                     0x06 */
-__IO uint32_t CR;            /*!< CRC Control register,                         Address offset: 0x08 */
-uint32_t RESERVED2;          /*!< Reserved,                                                     0x0C */
-__IO uint32_t INIT;          /*!< Initial CRC value register,                   Address offset: 0x10 */
-__IO uint32_t POL;           /*!< CRC polynomial register,                      Address offset: 0x14 */
-} CRC_TypeDef;
-
-/** 
-  * @brief Debug MCU
-  */
-
-typedef struct
-{
-  __IO uint32_t IDCODE;       /*!< MCU device ID code,                          Address offset: 0x00 */
-  __IO uint32_t CR;           /*!< Debug MCU configuration register,            Address offset: 0x04 */
-  __IO uint32_t APB1FZ;       /*!< Debug MCU APB1 freeze register,              Address offset: 0x08 */
-  __IO uint32_t APB2FZ;       /*!< Debug MCU APB2 freeze register,              Address offset: 0x0C */
-}DBGMCU_TypeDef;
-
-/** 
-  * @brief DMA Controller
-  */
-
-typedef struct
-{
-  __IO uint32_t CCR;          /*!< DMA channel x configuration register */
-  __IO uint32_t CNDTR;        /*!< DMA channel x number of data register */
-  __IO uint32_t CPAR;         /*!< DMA channel x peripheral address register */
-  __IO uint32_t CMAR;         /*!< DMA channel x memory address register */
-} DMA_Channel_TypeDef;
-
-typedef struct
-{
-  __IO uint32_t ISR;          /*!< DMA interrupt status register,               Address offset: 0x00 */
-  __IO uint32_t IFCR;         /*!< DMA interrupt flag clear register,           Address offset: 0x04 */
-} DMA_TypeDef;                                                                  
-                                                                                
-typedef struct                                                                  
-{                                                                               
-  __IO uint32_t CSELR;        /*!< DMA channel selection register,              Address offset: 0xA8 */
-} DMA_Request_TypeDef;                                                          
-                                                                                
-/**                                                                             
-  * @brief External Interrupt/Event Controller                                  
-  */                                                                            
-                                                                                
-typedef struct                                                                  
-{                                                                               
-  __IO uint32_t IMR;          /*!<EXTI Interrupt mask register,                 Address offset: 0x00 */
-  __IO uint32_t EMR;          /*!<EXTI Event mask register,                     Address offset: 0x04 */
-  __IO uint32_t RTSR;         /*!<EXTI Rising trigger selection register ,      Address offset: 0x08 */
-  __IO uint32_t FTSR;         /*!<EXTI Falling trigger selection register,      Address offset: 0x0C */
-  __IO uint32_t SWIER;        /*!<EXTI Software interrupt event register,       Address offset: 0x10 */
-  __IO uint32_t PR;           /*!<EXTI Pending register,                        Address offset: 0x14 */
-}EXTI_TypeDef;
-
-/** 
-  * @brief FLASH Registers
-  */
-typedef struct
-{
-  __IO uint32_t ACR;           /*!< Access control register,                     Address offset: 0x00 */
-  __IO uint32_t PECR;          /*!< Program/erase control register,              Address offset: 0x04 */
-  __IO uint32_t PDKEYR;        /*!< Power down key register,                     Address offset: 0x08 */
-  __IO uint32_t PEKEYR;        /*!< Program/erase key register,                  Address offset: 0x0c */
-  __IO uint32_t PRGKEYR;       /*!< Program memory key register,                 Address offset: 0x10 */
-  __IO uint32_t OPTKEYR;       /*!< Option byte key register,                    Address offset: 0x14 */
-  __IO uint32_t SR;            /*!< Status register,                             Address offset: 0x18 */
-  __IO uint32_t OPTR;          /*!< Option byte register,                        Address offset: 0x1c */
-  __IO uint32_t WRPR;          /*!< Write protection register,                   Address offset: 0x20 */
-} FLASH_TypeDef;
-
-
-/** 
-  * @brief Option Bytes Registers
-  */
-typedef struct
-{
-  __IO uint32_t RDP;               /*!< Read protection register,               Address offset: 0x00 */
-  __IO uint32_t USER;              /*!< user register,                          Address offset: 0x04 */
-  __IO uint32_t WRP01;             /*!< write protection Bytes 0 and 1          Address offset: 0x08 */
-} OB_TypeDef;
-  
-
-/** 
-  * @brief General Purpose IO
-  */
-
-typedef struct
-{
-  __IO uint32_t MODER;        /*!< GPIO port mode register,                     Address offset: 0x00 */
-  __IO uint32_t OTYPER;       /*!< GPIO port output type register,              Address offset: 0x04 */
-  __IO uint32_t OSPEEDR;      /*!< GPIO port output speed register,             Address offset: 0x08 */
-  __IO uint32_t PUPDR;        /*!< GPIO port pull-up/pull-down register,        Address offset: 0x0C */
-  __IO uint32_t IDR;          /*!< GPIO port input data register,               Address offset: 0x10 */
-  __IO uint32_t ODR;          /*!< GPIO port output data register,              Address offset: 0x14 */
-  __IO uint32_t BSRR;         /*!< GPIO port bit set/reset registerBSRR,        Address offset: 0x18 */
-  __IO uint32_t LCKR;         /*!< GPIO port configuration lock register,       Address offset: 0x1C */
-  __IO uint32_t AFR[2];       /*!< GPIO alternate function register,            Address offset: 0x20-0x24 */
-  __IO uint32_t BRR;          /*!< GPIO bit reset register,                     Address offset: 0x28 */
-}GPIO_TypeDef;
-
-/** 
-  * @brief LPTIMIMER
-  */
-typedef struct
-{
-  __IO uint32_t ISR;      /*!< LPTIM Interrupt and Status register,             Address offset: 0x00 */
-  __IO uint32_t ICR;      /*!< LPTIM Interrupt Clear register,                  Address offset: 0x04 */
-  __IO uint32_t IER;      /*!< LPTIM Interrupt Enable register,                 Address offset: 0x08 */
-  __IO uint32_t CFGR;     /*!< LPTIM Configuration register,                    Address offset: 0x0C */
-  __IO uint32_t CR;       /*!< LPTIM Control register,                          Address offset: 0x10 */
-  __IO uint32_t CMP;      /*!< LPTIM Compare register,                          Address offset: 0x14 */
-  __IO uint32_t ARR;      /*!< LPTIM Autoreload register,                       Address offset: 0x18 */
-  __IO uint32_t CNT;      /*!< LPTIM Counter register,                          Address offset: 0x1C */
-} LPTIM_TypeDef;
-
-/** 
-  * @brief SysTem Configuration
-  */
-
-typedef struct
-{
-  __IO uint32_t CFGR1;         /*!< SYSCFG configuration register 1,                    Address offset: 0x00 */
-  __IO uint32_t CFGR2;         /*!< SYSCFG configuration register 2,                    Address offset: 0x04 */
-  __IO uint32_t EXTICR[4];     /*!< SYSCFG external interrupt configuration register,   Address offset: 0x14-0x08 */
-       uint32_t RESERVED[2];   /*!< Reserved,                                           0x18-0x1C */
-  __IO uint32_t CFGR3;         /*!< SYSCFG configuration register 3,                    Address offset: 0x20 */       
-} SYSCFG_TypeDef;
-
-
-
-/** 
-  * @brief Inter-integrated Circuit Interface
-  */
-
-typedef struct
-{
-  __IO uint32_t CR1;      /*!< I2C Control register 1,            Address offset: 0x00 */
-  __IO uint32_t CR2;      /*!< I2C Control register 2,            Address offset: 0x04 */
-  __IO uint32_t OAR1;     /*!< I2C Own address 1 register,        Address offset: 0x08 */
-  __IO uint32_t OAR2;     /*!< I2C Own address 2 register,        Address offset: 0x0C */
-  __IO uint32_t TIMINGR;  /*!< I2C Timing register,               Address offset: 0x10 */
-  __IO uint32_t TIMEOUTR; /*!< I2C Timeout register,              Address offset: 0x14 */
-  __IO uint32_t ISR;      /*!< I2C Interrupt and status register, Address offset: 0x18 */
-  __IO uint32_t ICR;      /*!< I2C Interrupt clear register,      Address offset: 0x1C */
-  __IO uint32_t PECR;     /*!< I2C PEC register,                  Address offset: 0x20 */
-  __IO uint32_t RXDR;     /*!< I2C Receive data register,         Address offset: 0x24 */
-  __IO uint32_t TXDR;     /*!< I2C Transmit data register,        Address offset: 0x28 */
-}I2C_TypeDef;
-
-
-/** 
-  * @brief Independent WATCHDOG
-  */
-typedef struct
-{
-  __IO uint32_t KR;   /*!< IWDG Key register,       Address offset: 0x00 */
-  __IO uint32_t PR;   /*!< IWDG Prescaler register, Address offset: 0x04 */
-  __IO uint32_t RLR;  /*!< IWDG Reload register,    Address offset: 0x08 */
-  __IO uint32_t SR;   /*!< IWDG Status register,    Address offset: 0x0C */
-  __IO uint32_t WINR; /*!< IWDG Window register,    Address offset: 0x10 */
-} IWDG_TypeDef;
-
-/** 
-  * @brief MIFARE Firewall
-  */
-typedef struct
-{
-  __IO uint32_t CSSA;     /*!< Code Segment Start Address register,               Address offset: 0x00 */
-  __IO uint32_t CSL;      /*!< Code Segment Length register,                      Address offset: 0x04 */
-  __IO uint32_t NVDSSA;   /*!< NON volatile data Segment Start Address register,  Address offset: 0x08 */
-  __IO uint32_t NVDSL;    /*!< NON volatile data Segment Length register,         Address offset: 0x0C */
-  __IO uint32_t VDSSA ;   /*!< Volatile data Segment Start Address register,      Address offset: 0x10 */
-  __IO uint32_t VDSL ;    /*!< Volatile data Segment Length register,             Address offset: 0x14 */
-  __IO uint32_t LSSA ;    /*!< Library Segment Start Address register,            Address offset: 0x18 */
-  __IO uint32_t LSL ;     /*!< Library Segment Length register,                   Address offset: 0x1C */
-  __IO uint32_t CR ;      /*!< Configuration  register,                           Address offset: 0x20 */
- 
-} FIREWALL_TypeDef;
-
-/** 
-  * @brief Power Control
-  */
-typedef struct
-{
-  __IO uint32_t CR;   /*!< PWR power control register,        Address offset: 0x00 */
-  __IO uint32_t CSR;  /*!< PWR power control/status register, Address offset: 0x04 */
-} PWR_TypeDef;
-
-/** 
-  * @brief Reset and Clock Control
-  */
-typedef struct
-{
-  __IO uint32_t CR;            /*!< RCC clock control register,                                   Address offset: 0x00 */
-  __IO uint32_t ICSCR;         /*!< RCC Internal clock sources calibration register,              Address offset: 0x04 */
-  __IO uint32_t CRRCR;         /*!< RCC Clock recovery RC register,                               Address offset: 0x08 */
-  __IO uint32_t CFGR;          /*!< RCC Clock configuration register,                             Address offset: 0x0C */
-  __IO uint32_t CIER;          /*!< RCC Clock interrupt enable register,                          Address offset: 0x10 */
-  __IO uint32_t CIFR;          /*!< RCC Clock interrupt flag register,                            Address offset: 0x14 */
-  __IO uint32_t CICR;          /*!< RCC Clock interrupt clear register,                           Address offset: 0x18 */
-  __IO uint32_t IOPRSTR;       /*!< RCC IO port reset register,                                   Address offset: 0x1C */
-  __IO uint32_t AHBRSTR;       /*!< RCC AHB peripheral reset register,                            Address offset: 0x20 */
-  __IO uint32_t APB2RSTR;      /*!< RCC APB2 peripheral reset register,                           Address offset: 0x24 */
-  __IO uint32_t APB1RSTR;      /*!< RCC APB1 peripheral reset register,                           Address offset: 0x28 */
-  __IO uint32_t IOPENR;        /*!< RCC Clock IO port enable register,                            Address offset: 0x2C */
-  __IO uint32_t AHBENR;        /*!< RCC AHB peripheral clock enable register,                     Address offset: 0x30 */
-  __IO uint32_t APB2ENR;       /*!< RCC APB2 peripheral enable register,                          Address offset: 0x34 */
-  __IO uint32_t APB1ENR;       /*!< RCC APB1 peripheral enable register,                          Address offset: 0x38 */
-  __IO uint32_t IOPSMENR;      /*!< RCC IO port clock enable in sleep mode register,              Address offset: 0x3C */
-  __IO uint32_t AHBSMENR;      /*!< RCC AHB peripheral clock enable in sleep mode register,       Address offset: 0x40 */
-  __IO uint32_t APB2SMENR;     /*!< RCC APB2 peripheral clock enable in sleep mode register,      Address offset: 0x44 */
-  __IO uint32_t APB1SMENR;     /*!< RCC APB1 peripheral clock enable in sleep mode register,      Address offset: 0x48 */
-  __IO uint32_t CCIPR;         /*!< RCC clock configuration register,                             Address offset: 0x4C */
-  __IO uint32_t CSR;           /*!< RCC Control/status register,                                  Address offset: 0x50 */
-} RCC_TypeDef;
-
-/** 
-  * @brief Real-Time Clock
-  */
-typedef struct
-{
-  __IO uint32_t TR;         /*!< RTC time register,                                         Address offset: 0x00 */
-  __IO uint32_t DR;         /*!< RTC date register,                                         Address offset: 0x04 */
-  __IO uint32_t CR;         /*!< RTC control register,                                      Address offset: 0x08 */
-  __IO uint32_t ISR;        /*!< RTC initialization and status register,                    Address offset: 0x0C */
-  __IO uint32_t PRER;       /*!< RTC prescaler register,                                    Address offset: 0x10 */
-  __IO uint32_t WUTR;       /*!< RTC wakeup timer register,                                 Address offset: 0x14 */
-       uint32_t RESERVED;   /*!< Reserved,                                                  Address offset: 0x18 */
-  __IO uint32_t ALRMAR;     /*!< RTC alarm A register,                                      Address offset: 0x1C */
-  __IO uint32_t ALRMBR;     /*!< RTC alarm B register,                                      Address offset: 0x20 */
-  __IO uint32_t WPR;        /*!< RTC write protection register,                             Address offset: 0x24 */
-  __IO uint32_t SSR;        /*!< RTC sub second register,                                   Address offset: 0x28 */
-  __IO uint32_t SHIFTR;     /*!< RTC shift control register,                                Address offset: 0x2C */
-  __IO uint32_t TSTR;       /*!< RTC time stamp time register,                              Address offset: 0x30 */
-  __IO uint32_t TSDR;       /*!< RTC time stamp date register,                              Address offset: 0x34 */
-  __IO uint32_t TSSSR;      /*!< RTC time-stamp sub second register,                        Address offset: 0x38 */
-  __IO uint32_t CALR;       /*!< RTC calibration register,                                  Address offset: 0x3C */
-  __IO uint32_t TAMPCR;     /*!< RTC tamper configuration register,                         Address offset: 0x40 */
-  __IO uint32_t ALRMASSR;   /*!< RTC alarm A sub second register,                           Address offset: 0x44 */
-  __IO uint32_t ALRMBSSR;   /*!< RTC alarm B sub second register,                           Address offset: 0x48 */
-  __IO uint32_t OR;         /*!< RTC option register,                                       Address offset  0x4C */
-  __IO uint32_t BKP0R;      /*!< RTC backup register 0,                                     Address offset: 0x50 */
-  __IO uint32_t BKP1R;      /*!< RTC backup register 1,                                     Address offset: 0x54 */
-  __IO uint32_t BKP2R;      /*!< RTC backup register 2,                                     Address offset: 0x58 */
-  __IO uint32_t BKP3R;      /*!< RTC backup register 3,                                     Address offset: 0x5C */
-  __IO uint32_t BKP4R;      /*!< RTC backup register 4,                                     Address offset: 0x60 */
-} RTC_TypeDef;
-
-
-/** 
-  * @brief Serial Peripheral Interface
-  */
-typedef struct
-{
-  __IO uint32_t CR1;      /*!< SPI Control register 1 (not used in I2S mode),       Address offset: 0x00 */
-  __IO uint32_t CR2;      /*!< SPI Control register 2,                              Address offset: 0x04 */
-  __IO uint32_t SR;       /*!< SPI Status register,                                 Address offset: 0x08 */
-  __IO uint32_t DR;       /*!< SPI data register,                                   Address offset: 0x0C */
-  __IO uint32_t CRCPR;    /*!< SPI CRC polynomial register (not used in I2S mode),  Address offset: 0x10 */
-  __IO uint32_t RXCRCR;   /*!< SPI Rx CRC register (not used in I2S mode),          Address offset: 0x14 */
-  __IO uint32_t TXCRCR;   /*!< SPI Tx CRC register (not used in I2S mode),          Address offset: 0x18 */
-  __IO uint32_t I2SCFGR;  /*!< SPI_I2S configuration register,                      Address offset: 0x1C */
-  __IO uint32_t I2SPR;    /*!< SPI_I2S prescaler register,                          Address offset: 0x20 */
-} SPI_TypeDef;
-
-/** 
-  * @brief TIM
-  */
-typedef struct
-{
-  __IO uint32_t CR1;       /*!< TIM control register 1,                       Address offset: 0x00 */
-  __IO uint32_t CR2;       /*!< TIM control register 2,                       Address offset: 0x04 */
-  __IO uint32_t SMCR;      /*!< TIM slave Mode Control register,              Address offset: 0x08 */
-  __IO uint32_t DIER;      /*!< TIM DMA/interrupt enable register,            Address offset: 0x0C */
-  __IO uint32_t SR;        /*!< TIM status register,                          Address offset: 0x10 */
-  __IO uint32_t EGR;       /*!< TIM event generation register,                Address offset: 0x14 */
-  __IO uint32_t CCMR1;     /*!< TIM  capture/compare mode register 1,         Address offset: 0x18 */
-  __IO uint32_t CCMR2;     /*!< TIM  capture/compare mode register 2,         Address offset: 0x1C */
-  __IO uint32_t CCER;      /*!< TIM capture/compare enable register,          Address offset: 0x20 */
-  __IO uint32_t CNT;       /*!< TIM counter register,                         Address offset: 0x24 */
-  __IO uint32_t PSC;       /*!< TIM prescaler register,                       Address offset: 0x28 */
-  __IO uint32_t ARR;       /*!< TIM auto-reload register,                     Address offset: 0x2C */
-  uint32_t      RESERVED12;/*!< Reserved                                      Address offset: 0x30 */
-  __IO uint32_t CCR1;      /*!< TIM capture/compare register 1,               Address offset: 0x34 */
-  __IO uint32_t CCR2;      /*!< TIM capture/compare register 2,               Address offset: 0x38 */
-  __IO uint32_t CCR3;      /*!< TIM capture/compare register 3,               Address offset: 0x3C */
-  __IO uint32_t CCR4;      /*!< TIM capture/compare register 4,               Address offset: 0x40 */
-  uint32_t      RESERVED17;/*!< Reserved,                                     Address offset: 0x44 */
-  __IO uint32_t DCR;       /*!< TIM DMA control register,                     Address offset: 0x48 */
-  __IO uint32_t DMAR;      /*!< TIM DMA address for full transfer register,   Address offset: 0x4C */
-  __IO uint32_t OR;        /*!< TIM option register,                          Address offset: 0x50 */
-} TIM_TypeDef;
-
-/** 
-  * @brief Universal Synchronous Asynchronous Receiver Transmitter
-  */
-typedef struct
-{
-  __IO uint32_t CR1;    /*!< USART Control register 1,                 Address offset: 0x00 */ 
-  __IO uint32_t CR2;    /*!< USART Control register 2,                 Address offset: 0x04 */ 
-  __IO uint32_t CR3;    /*!< USART Control register 3,                 Address offset: 0x08 */
-  __IO uint32_t BRR;    /*!< USART Baud rate register,                 Address offset: 0x0C */  
-  __IO uint32_t GTPR;   /*!< USART Guard time and prescaler register,  Address offset: 0x10 */
-  __IO uint32_t RTOR;   /*!< USART Receiver Time Out register,         Address offset: 0x14 */  
-  __IO uint32_t RQR;    /*!< USART Request register,                   Address offset: 0x18 */
-  __IO uint32_t ISR;    /*!< USART Interrupt and status register,      Address offset: 0x1C */
-  __IO uint32_t ICR;    /*!< USART Interrupt flag Clear register,      Address offset: 0x20 */
-  __IO uint32_t RDR;    /*!< USART Receive Data register,              Address offset: 0x24 */
-  __IO uint32_t TDR;    /*!< USART Transmit Data register,             Address offset: 0x28 */
-} USART_TypeDef;
-
-/** 
-  * @brief Window WATCHDOG
-  */
-typedef struct
-{
-  __IO uint32_t CR;   /*!< WWDG Control register,       Address offset: 0x00 */
-  __IO uint32_t CFR;  /*!< WWDG Configuration register, Address offset: 0x04 */
-  __IO uint32_t SR;   /*!< WWDG Status register,        Address offset: 0x08 */
-} WWDG_TypeDef;
-
-
-/**
-  * @}
-  */
-  
-/** @addtogroup Peripheral_memory_map
-  * @{
-  */
-#define FLASH_BASE             (0x08000000UL) /*!< FLASH base address in the alias region */
-
-#define DATA_EEPROM_BASE       (0x08080000UL) /*!< DATA_EEPROM base address in the alias region */
-#define DATA_EEPROM_END        (0x080807FFUL) /*!< DATA EEPROM end address in the alias region */
-#define SRAM_BASE              (0x20000000UL) /*!< SRAM base address in the alias region */
-#define SRAM_SIZE_MAX          (0x00002000UL) /*!< maximum SRAM size (up to 8KBytes) */
-
-#define PERIPH_BASE            (0x40000000UL) /*!< Peripheral base address in the alias region */
-
-/*!< Peripheral memory map */
-#define APBPERIPH_BASE        PERIPH_BASE
-#define AHBPERIPH_BASE        (PERIPH_BASE + 0x00020000UL)
-#define IOPPERIPH_BASE        (PERIPH_BASE + 0x10000000UL)
-
-#define TIM2_BASE             (APBPERIPH_BASE + 0x00000000UL)
-#define TIM6_BASE             (APBPERIPH_BASE + 0x00001000UL)
-#define RTC_BASE              (APBPERIPH_BASE + 0x00002800UL)
-#define WWDG_BASE             (APBPERIPH_BASE + 0x00002C00UL)
-#define IWDG_BASE             (APBPERIPH_BASE + 0x00003000UL)
-#define SPI2_BASE             (APBPERIPH_BASE + 0x00003800UL)
-#define USART2_BASE           (APBPERIPH_BASE + 0x00004400UL)
-#define LPUART1_BASE          (APBPERIPH_BASE + 0x00004800UL)
-#define I2C1_BASE             (APBPERIPH_BASE + 0x00005400UL)
-#define I2C2_BASE             (APBPERIPH_BASE + 0x00005800UL)
-#define PWR_BASE              (APBPERIPH_BASE + 0x00007000UL)
-#define LPTIM1_BASE           (APBPERIPH_BASE + 0x00007C00UL)
-
-#define SYSCFG_BASE           (APBPERIPH_BASE + 0x00010000UL)
-#define COMP1_BASE            (APBPERIPH_BASE + 0x00010018UL)
-#define COMP2_BASE            (APBPERIPH_BASE + 0x0001001CUL)
-#define COMP12_COMMON       ((COMP_Common_TypeDef *) COMP1_BASE)
-#define EXTI_BASE             (APBPERIPH_BASE + 0x00010400UL)
-#define TIM21_BASE            (APBPERIPH_BASE + 0x00010800UL)
-#define TIM22_BASE            (APBPERIPH_BASE + 0x00011400UL)
-#define FIREWALL_BASE         (APBPERIPH_BASE + 0x00011C00UL)
-#define ADC1_BASE             (APBPERIPH_BASE + 0x00012400UL)
-#define ADC_BASE              (APBPERIPH_BASE + 0x00012708UL)
-#define SPI1_BASE             (APBPERIPH_BASE + 0x00013000UL)
-#define USART1_BASE           (APBPERIPH_BASE + 0x00013800UL)
-#define DBGMCU_BASE           (APBPERIPH_BASE + 0x00015800UL)
-
-#define DMA1_BASE             (AHBPERIPH_BASE + 0x00000000UL)
-#define DMA1_Channel1_BASE    (DMA1_BASE + 0x00000008UL)
-#define DMA1_Channel2_BASE    (DMA1_BASE + 0x0000001CUL)
-#define DMA1_Channel3_BASE    (DMA1_BASE + 0x00000030UL)
-#define DMA1_Channel4_BASE    (DMA1_BASE + 0x00000044UL)
-#define DMA1_Channel5_BASE    (DMA1_BASE + 0x00000058UL)
-#define DMA1_Channel6_BASE    (DMA1_BASE + 0x0000006CUL)
-#define DMA1_Channel7_BASE    (DMA1_BASE + 0x00000080UL)
-#define DMA1_CSELR_BASE       (DMA1_BASE + 0x000000A8UL)
-
-
-#define RCC_BASE              (AHBPERIPH_BASE + 0x00001000UL)
-#define FLASH_R_BASE          (AHBPERIPH_BASE + 0x00002000UL) /*!< FLASH registers base address */
-#define OB_BASE               (0x1FF80000UL)        /*!< FLASH Option Bytes base address */
-#define FLASHSIZE_BASE        (0x1FF8007CUL)        /*!< FLASH Size register base address */
-#define UID_BASE              (0x1FF80050UL)        /*!< Unique device ID register base address  */
-#define CRC_BASE              (AHBPERIPH_BASE + 0x00003000UL)
-#define AES_BASE              (AHBPERIPH_BASE + 0x00006000UL)
-
-#define GPIOA_BASE            (IOPPERIPH_BASE + 0x00000000UL)
-#define GPIOB_BASE            (IOPPERIPH_BASE + 0x00000400UL)
-#define GPIOC_BASE            (IOPPERIPH_BASE + 0x00000800UL)
-#define GPIOD_BASE            (IOPPERIPH_BASE + 0x00000C00UL)
-#define GPIOH_BASE            (IOPPERIPH_BASE + 0x00001C00UL)
-
-/**
-  * @}
-  */
-  
-/** @addtogroup Peripheral_declaration
-  * @{
-  */  
-
-#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
-#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
-#define RTC                 ((RTC_TypeDef *) RTC_BASE)
-#define WWDG                ((WWDG_TypeDef *) WWDG_BASE)
-#define IWDG                ((IWDG_TypeDef *) IWDG_BASE)
-#define SPI2                ((SPI_TypeDef *) SPI2_BASE)
-#define USART2              ((USART_TypeDef *) USART2_BASE)
-#define LPUART1             ((USART_TypeDef *) LPUART1_BASE)
-#define I2C1                ((I2C_TypeDef *) I2C1_BASE)
-#define I2C2                ((I2C_TypeDef *) I2C2_BASE)
-#define PWR                 ((PWR_TypeDef *) PWR_BASE)
-#define LPTIM1              ((LPTIM_TypeDef *) LPTIM1_BASE)
-
-#define SYSCFG              ((SYSCFG_TypeDef *) SYSCFG_BASE)
-#define COMP1               ((COMP_TypeDef *) COMP1_BASE)
-#define COMP2               ((COMP_TypeDef *) COMP2_BASE)
-#define EXTI                ((EXTI_TypeDef *) EXTI_BASE)
-#define TIM21               ((TIM_TypeDef *) TIM21_BASE)
-#define TIM22               ((TIM_TypeDef *) TIM22_BASE)
-#define FIREWALL            ((FIREWALL_TypeDef *) FIREWALL_BASE)
-#define ADC1                ((ADC_TypeDef *) ADC1_BASE)
-#define ADC1_COMMON         ((ADC_Common_TypeDef *) ADC_BASE)
-/* Legacy defines */
-#define ADC                 ADC1_COMMON
-#define SPI1                ((SPI_TypeDef *) SPI1_BASE)
-#define USART1              ((USART_TypeDef *) USART1_BASE)
-#define DBGMCU              ((DBGMCU_TypeDef *) DBGMCU_BASE)
-
-#define DMA1                ((DMA_TypeDef *) DMA1_BASE)
-#define DMA1_Channel1       ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
-#define DMA1_Channel2       ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
-#define DMA1_Channel3       ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
-#define DMA1_Channel4       ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
-#define DMA1_Channel5       ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
-#define DMA1_Channel6       ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
-#define DMA1_Channel7       ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
-#define DMA1_CSELR          ((DMA_Request_TypeDef *) DMA1_CSELR_BASE)
-
-
-#define FLASH               ((FLASH_TypeDef *) FLASH_R_BASE)
-#define OB                  ((OB_TypeDef *) OB_BASE) 
-#define RCC                 ((RCC_TypeDef *) RCC_BASE)
-#define CRC                 ((CRC_TypeDef *) CRC_BASE)
-#define AES                 ((AES_TypeDef *) AES_BASE)
-
-#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)
-#define GPIOB               ((GPIO_TypeDef *) GPIOB_BASE)
-#define GPIOC               ((GPIO_TypeDef *) GPIOC_BASE)
-#define GPIOD               ((GPIO_TypeDef *) GPIOD_BASE)
-#define GPIOH               ((GPIO_TypeDef *) GPIOH_BASE)
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_constants
-  * @{
-  */
-  
-  /** @addtogroup Peripheral_Registers_Bits_Definition
-  * @{
-  */
-    
-/******************************************************************************/
-/*                         Peripheral Registers Bits Definition               */
-/******************************************************************************/
-/******************************************************************************/
-/*                                                                            */
-/*                      Analog to Digital Converter (ADC)                     */
-/*                                                                            */
-/******************************************************************************/
-/********************  Bits definition for ADC_ISR register  ******************/
-#define ADC_ISR_EOCAL_Pos          (11U)      
-#define ADC_ISR_EOCAL_Msk          (0x1UL << ADC_ISR_EOCAL_Pos)                 /*!< 0x00000800 */
-#define ADC_ISR_EOCAL              ADC_ISR_EOCAL_Msk                           /*!< End of calibration flag */
-#define ADC_ISR_AWD_Pos            (7U)       
-#define ADC_ISR_AWD_Msk            (0x1UL << ADC_ISR_AWD_Pos)                   /*!< 0x00000080 */
-#define ADC_ISR_AWD                ADC_ISR_AWD_Msk                             /*!< Analog watchdog flag */
-#define ADC_ISR_OVR_Pos            (4U)       
-#define ADC_ISR_OVR_Msk            (0x1UL << ADC_ISR_OVR_Pos)                   /*!< 0x00000010 */
-#define ADC_ISR_OVR                ADC_ISR_OVR_Msk                             /*!< Overrun flag */
-#define ADC_ISR_EOSEQ_Pos          (3U)       
-#define ADC_ISR_EOSEQ_Msk          (0x1UL << ADC_ISR_EOSEQ_Pos)                 /*!< 0x00000008 */
-#define ADC_ISR_EOSEQ              ADC_ISR_EOSEQ_Msk                           /*!< End of Sequence flag */
-#define ADC_ISR_EOC_Pos            (2U)       
-#define ADC_ISR_EOC_Msk            (0x1UL << ADC_ISR_EOC_Pos)                   /*!< 0x00000004 */
-#define ADC_ISR_EOC                ADC_ISR_EOC_Msk                             /*!< End of Conversion */
-#define ADC_ISR_EOSMP_Pos          (1U)       
-#define ADC_ISR_EOSMP_Msk          (0x1UL << ADC_ISR_EOSMP_Pos)                 /*!< 0x00000002 */
-#define ADC_ISR_EOSMP              ADC_ISR_EOSMP_Msk                           /*!< End of sampling flag */
-#define ADC_ISR_ADRDY_Pos          (0U)       
-#define ADC_ISR_ADRDY_Msk          (0x1UL << ADC_ISR_ADRDY_Pos)                 /*!< 0x00000001 */
-#define ADC_ISR_ADRDY              ADC_ISR_ADRDY_Msk                           /*!< ADC Ready */
-
-/* Old EOSEQ bit definition, maintained for legacy purpose */
-#define ADC_ISR_EOS                          ADC_ISR_EOSEQ
-
-/********************  Bits definition for ADC_IER register  ******************/
-#define ADC_IER_EOCALIE_Pos        (11U)      
-#define ADC_IER_EOCALIE_Msk        (0x1UL << ADC_IER_EOCALIE_Pos)               /*!< 0x00000800 */
-#define ADC_IER_EOCALIE            ADC_IER_EOCALIE_Msk                         /*!< Enf Of Calibration interrupt enable */
-#define ADC_IER_AWDIE_Pos          (7U)       
-#define ADC_IER_AWDIE_Msk          (0x1UL << ADC_IER_AWDIE_Pos)                 /*!< 0x00000080 */
-#define ADC_IER_AWDIE              ADC_IER_AWDIE_Msk                           /*!< Analog Watchdog interrupt enable */
-#define ADC_IER_OVRIE_Pos          (4U)       
-#define ADC_IER_OVRIE_Msk          (0x1UL << ADC_IER_OVRIE_Pos)                 /*!< 0x00000010 */
-#define ADC_IER_OVRIE              ADC_IER_OVRIE_Msk                           /*!< Overrun interrupt enable */
-#define ADC_IER_EOSEQIE_Pos        (3U)       
-#define ADC_IER_EOSEQIE_Msk        (0x1UL << ADC_IER_EOSEQIE_Pos)               /*!< 0x00000008 */
-#define ADC_IER_EOSEQIE            ADC_IER_EOSEQIE_Msk                         /*!< End of Sequence of conversion interrupt enable */
-#define ADC_IER_EOCIE_Pos          (2U)       
-#define ADC_IER_EOCIE_Msk          (0x1UL << ADC_IER_EOCIE_Pos)                 /*!< 0x00000004 */
-#define ADC_IER_EOCIE              ADC_IER_EOCIE_Msk                           /*!< End of Conversion interrupt enable */
-#define ADC_IER_EOSMPIE_Pos        (1U)       
-#define ADC_IER_EOSMPIE_Msk        (0x1UL << ADC_IER_EOSMPIE_Pos)               /*!< 0x00000002 */
-#define ADC_IER_EOSMPIE            ADC_IER_EOSMPIE_Msk                         /*!< End of sampling interrupt enable */
-#define ADC_IER_ADRDYIE_Pos        (0U)       
-#define ADC_IER_ADRDYIE_Msk        (0x1UL << ADC_IER_ADRDYIE_Pos)               /*!< 0x00000001 */
-#define ADC_IER_ADRDYIE            ADC_IER_ADRDYIE_Msk                         /*!< ADC Ready interrupt enable */
-
-/* Old EOSEQIE bit definition, maintained for legacy purpose */
-#define ADC_IER_EOSIE                        ADC_IER_EOSEQIE
-
-/********************  Bits definition for ADC_CR register  *******************/
-#define ADC_CR_ADCAL_Pos           (31U)      
-#define ADC_CR_ADCAL_Msk           (0x1UL << ADC_CR_ADCAL_Pos)                  /*!< 0x80000000 */
-#define ADC_CR_ADCAL               ADC_CR_ADCAL_Msk                            /*!< ADC calibration */
-#define ADC_CR_ADVREGEN_Pos        (28U)      
-#define ADC_CR_ADVREGEN_Msk        (0x1UL << ADC_CR_ADVREGEN_Pos)               /*!< 0x10000000 */
-#define ADC_CR_ADVREGEN            ADC_CR_ADVREGEN_Msk                         /*!< ADC Voltage Regulator Enable */
-#define ADC_CR_ADSTP_Pos           (4U)       
-#define ADC_CR_ADSTP_Msk           (0x1UL << ADC_CR_ADSTP_Pos)                  /*!< 0x00000010 */
-#define ADC_CR_ADSTP               ADC_CR_ADSTP_Msk                            /*!< ADC stop of conversion command */
-#define ADC_CR_ADSTART_Pos         (2U)       
-#define ADC_CR_ADSTART_Msk         (0x1UL << ADC_CR_ADSTART_Pos)                /*!< 0x00000004 */
-#define ADC_CR_ADSTART             ADC_CR_ADSTART_Msk                          /*!< ADC start of conversion */
-#define ADC_CR_ADDIS_Pos           (1U)       
-#define ADC_CR_ADDIS_Msk           (0x1UL << ADC_CR_ADDIS_Pos)                  /*!< 0x00000002 */
-#define ADC_CR_ADDIS               ADC_CR_ADDIS_Msk                            /*!< ADC disable command */
-#define ADC_CR_ADEN_Pos            (0U)       
-#define ADC_CR_ADEN_Msk            (0x1UL << ADC_CR_ADEN_Pos)                   /*!< 0x00000001 */
-#define ADC_CR_ADEN                ADC_CR_ADEN_Msk                             /*!< ADC enable control */ /*####   TBV  */
-
-/*******************  Bits definition for ADC_CFGR1 register  *****************/
-#define ADC_CFGR1_AWDCH_Pos        (26U)      
-#define ADC_CFGR1_AWDCH_Msk        (0x1FUL << ADC_CFGR1_AWDCH_Pos)              /*!< 0x7C000000 */
-#define ADC_CFGR1_AWDCH            ADC_CFGR1_AWDCH_Msk                         /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
-#define ADC_CFGR1_AWDCH_0          (0x01UL << ADC_CFGR1_AWDCH_Pos)              /*!< 0x04000000 */
-#define ADC_CFGR1_AWDCH_1          (0x02UL << ADC_CFGR1_AWDCH_Pos)              /*!< 0x08000000 */
-#define ADC_CFGR1_AWDCH_2          (0x04UL << ADC_CFGR1_AWDCH_Pos)              /*!< 0x10000000 */
-#define ADC_CFGR1_AWDCH_3          (0x08UL << ADC_CFGR1_AWDCH_Pos)              /*!< 0x20000000 */
-#define ADC_CFGR1_AWDCH_4          (0x10UL << ADC_CFGR1_AWDCH_Pos)              /*!< 0x40000000 */
-#define ADC_CFGR1_AWDEN_Pos        (23U)      
-#define ADC_CFGR1_AWDEN_Msk        (0x1UL << ADC_CFGR1_AWDEN_Pos)               /*!< 0x00800000 */
-#define ADC_CFGR1_AWDEN            ADC_CFGR1_AWDEN_Msk                         /*!< Analog watchdog enable on regular channels */
-#define ADC_CFGR1_AWDSGL_Pos       (22U)      
-#define ADC_CFGR1_AWDSGL_Msk       (0x1UL << ADC_CFGR1_AWDSGL_Pos)              /*!< 0x00400000 */
-#define ADC_CFGR1_AWDSGL           ADC_CFGR1_AWDSGL_Msk                        /*!< Enable the watchdog on a single channel or on all channels  */
-#define ADC_CFGR1_DISCEN_Pos       (16U)      
-#define ADC_CFGR1_DISCEN_Msk       (0x1UL << ADC_CFGR1_DISCEN_Pos)              /*!< 0x00010000 */
-#define ADC_CFGR1_DISCEN           ADC_CFGR1_DISCEN_Msk                        /*!< Discontinuous mode on regular channels */
-#define ADC_CFGR1_AUTOFF_Pos       (15U)      
-#define ADC_CFGR1_AUTOFF_Msk       (0x1UL << ADC_CFGR1_AUTOFF_Pos)              /*!< 0x00008000 */
-#define ADC_CFGR1_AUTOFF           ADC_CFGR1_AUTOFF_Msk                        /*!< ADC auto power off */
-#define ADC_CFGR1_WAIT_Pos         (14U)      
-#define ADC_CFGR1_WAIT_Msk         (0x1UL << ADC_CFGR1_WAIT_Pos)                /*!< 0x00004000 */
-#define ADC_CFGR1_WAIT             ADC_CFGR1_WAIT_Msk                          /*!< ADC wait conversion mode */
-#define ADC_CFGR1_CONT_Pos         (13U)      
-#define ADC_CFGR1_CONT_Msk         (0x1UL << ADC_CFGR1_CONT_Pos)                /*!< 0x00002000 */
-#define ADC_CFGR1_CONT             ADC_CFGR1_CONT_Msk                          /*!< Continuous Conversion */
-#define ADC_CFGR1_OVRMOD_Pos       (12U)      
-#define ADC_CFGR1_OVRMOD_Msk       (0x1UL << ADC_CFGR1_OVRMOD_Pos)              /*!< 0x00001000 */
-#define ADC_CFGR1_OVRMOD           ADC_CFGR1_OVRMOD_Msk                        /*!< Overrun mode */
-#define ADC_CFGR1_EXTEN_Pos        (10U)      
-#define ADC_CFGR1_EXTEN_Msk        (0x3UL << ADC_CFGR1_EXTEN_Pos)               /*!< 0x00000C00 */
-#define ADC_CFGR1_EXTEN            ADC_CFGR1_EXTEN_Msk                         /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
-#define ADC_CFGR1_EXTEN_0          (0x1UL << ADC_CFGR1_EXTEN_Pos)               /*!< 0x00000400 */
-#define ADC_CFGR1_EXTEN_1          (0x2UL << ADC_CFGR1_EXTEN_Pos)               /*!< 0x00000800 */
-#define ADC_CFGR1_EXTSEL_Pos       (6U)       
-#define ADC_CFGR1_EXTSEL_Msk       (0x7UL << ADC_CFGR1_EXTSEL_Pos)              /*!< 0x000001C0 */
-#define ADC_CFGR1_EXTSEL           ADC_CFGR1_EXTSEL_Msk                        /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
-#define ADC_CFGR1_EXTSEL_0         (0x1UL << ADC_CFGR1_EXTSEL_Pos)              /*!< 0x00000040 */
-#define ADC_CFGR1_EXTSEL_1         (0x2UL << ADC_CFGR1_EXTSEL_Pos)              /*!< 0x00000080 */
-#define ADC_CFGR1_EXTSEL_2         (0x4UL << ADC_CFGR1_EXTSEL_Pos)              /*!< 0x00000100 */
-#define ADC_CFGR1_ALIGN_Pos        (5U)       
-#define ADC_CFGR1_ALIGN_Msk        (0x1UL << ADC_CFGR1_ALIGN_Pos)               /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN            ADC_CFGR1_ALIGN_Msk                         /*!< Data Alignment */
-#define ADC_CFGR1_RES_Pos          (3U)       
-#define ADC_CFGR1_RES_Msk          (0x3UL << ADC_CFGR1_RES_Pos)                 /*!< 0x00000018 */
-#define ADC_CFGR1_RES              ADC_CFGR1_RES_Msk                           /*!< RES[1:0] bits (Resolution) */
-#define ADC_CFGR1_RES_0            (0x1UL << ADC_CFGR1_RES_Pos)                 /*!< 0x00000008 */
-#define ADC_CFGR1_RES_1            (0x2UL << ADC_CFGR1_RES_Pos)                 /*!< 0x00000010 */
-#define ADC_CFGR1_SCANDIR_Pos      (2U)       
-#define ADC_CFGR1_SCANDIR_Msk      (0x1UL << ADC_CFGR1_SCANDIR_Pos)             /*!< 0x00000004 */
-#define ADC_CFGR1_SCANDIR          ADC_CFGR1_SCANDIR_Msk                       /*!< Sequence scan direction */
-#define ADC_CFGR1_DMACFG_Pos       (1U)       
-#define ADC_CFGR1_DMACFG_Msk       (0x1UL << ADC_CFGR1_DMACFG_Pos)              /*!< 0x00000002 */
-#define ADC_CFGR1_DMACFG           ADC_CFGR1_DMACFG_Msk                        /*!< Direct memory access configuration */
-#define ADC_CFGR1_DMAEN_Pos        (0U)       
-#define ADC_CFGR1_DMAEN_Msk        (0x1UL << ADC_CFGR1_DMAEN_Pos)               /*!< 0x00000001 */
-#define ADC_CFGR1_DMAEN            ADC_CFGR1_DMAEN_Msk                         /*!< Direct memory access enable */
-
-/* Old WAIT bit definition, maintained for legacy purpose */
-#define ADC_CFGR1_AUTDLY                    ADC_CFGR1_WAIT
-
-/*******************  Bits definition for ADC_CFGR2 register  *****************/
-#define ADC_CFGR2_TOVS_Pos         (9U)       
-#define ADC_CFGR2_TOVS_Msk         (0x1UL << ADC_CFGR2_TOVS_Pos)                /*!< 0x80000200 */
-#define ADC_CFGR2_TOVS             ADC_CFGR2_TOVS_Msk                          /*!< Triggered Oversampling */
-#define ADC_CFGR2_OVSS_Pos         (5U)       
-#define ADC_CFGR2_OVSS_Msk         (0xFUL << ADC_CFGR2_OVSS_Pos)                /*!< 0x000001E0 */
-#define ADC_CFGR2_OVSS             ADC_CFGR2_OVSS_Msk                          /*!< OVSS [3:0] bits (Oversampling shift) */
-#define ADC_CFGR2_OVSS_0           (0x1UL << ADC_CFGR2_OVSS_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR2_OVSS_1           (0x2UL << ADC_CFGR2_OVSS_Pos)                /*!< 0x00000040 */
-#define ADC_CFGR2_OVSS_2           (0x4UL << ADC_CFGR2_OVSS_Pos)                /*!< 0x00000080 */
-#define ADC_CFGR2_OVSS_3           (0x8UL << ADC_CFGR2_OVSS_Pos)                /*!< 0x00000100 */
-#define ADC_CFGR2_OVSR_Pos         (2U)       
-#define ADC_CFGR2_OVSR_Msk         (0x7UL << ADC_CFGR2_OVSR_Pos)                /*!< 0x0000001C */
-#define ADC_CFGR2_OVSR             ADC_CFGR2_OVSR_Msk                          /*!< OVSR  [2:0] bits (Oversampling ratio) */
-#define ADC_CFGR2_OVSR_0           (0x1UL << ADC_CFGR2_OVSR_Pos)                /*!< 0x00000004 */
-#define ADC_CFGR2_OVSR_1           (0x2UL << ADC_CFGR2_OVSR_Pos)                /*!< 0x00000008 */
-#define ADC_CFGR2_OVSR_2           (0x4UL << ADC_CFGR2_OVSR_Pos)                /*!< 0x00000010 */
-#define ADC_CFGR2_OVSE_Pos         (0U)       
-#define ADC_CFGR2_OVSE_Msk         (0x1UL << ADC_CFGR2_OVSE_Pos)                /*!< 0x00000001 */
-#define ADC_CFGR2_OVSE             ADC_CFGR2_OVSE_Msk                          /*!< Oversampler Enable */
-#define ADC_CFGR2_CKMODE_Pos       (30U)      
-#define ADC_CFGR2_CKMODE_Msk       (0x3UL << ADC_CFGR2_CKMODE_Pos)              /*!< 0xC0000000 */
-#define ADC_CFGR2_CKMODE           ADC_CFGR2_CKMODE_Msk                        /*!< CKMODE [1:0] bits (ADC clock mode) */
-#define ADC_CFGR2_CKMODE_0         (0x1UL << ADC_CFGR2_CKMODE_Pos)              /*!< 0x40000000 */
-#define ADC_CFGR2_CKMODE_1         (0x2UL << ADC_CFGR2_CKMODE_Pos)              /*!< 0x80000000 */
-
-
-/******************  Bit definition for ADC_SMPR register  ********************/
-#define ADC_SMPR_SMP_Pos           (0U)       
-#define ADC_SMPR_SMP_Msk           (0x7UL << ADC_SMPR_SMP_Pos)                  /*!< 0x00000007 */
-#define ADC_SMPR_SMP               ADC_SMPR_SMP_Msk                            /*!< SMPR[2:0] bits (Sampling time selection) */
-#define ADC_SMPR_SMP_0             (0x1UL << ADC_SMPR_SMP_Pos)                  /*!< 0x00000001 */
-#define ADC_SMPR_SMP_1             (0x2UL << ADC_SMPR_SMP_Pos)                  /*!< 0x00000002 */
-#define ADC_SMPR_SMP_2             (0x4UL << ADC_SMPR_SMP_Pos)                  /*!< 0x00000004 */
-
-/* Legacy defines */
-#define ADC_SMPR_SMPR                       ADC_SMPR_SMP
-#define ADC_SMPR_SMPR_0                     ADC_SMPR_SMP_0
-#define ADC_SMPR_SMPR_1                     ADC_SMPR_SMP_1
-#define ADC_SMPR_SMPR_2                     ADC_SMPR_SMP_2
-
-/*******************  Bit definition for ADC_TR register  ********************/
-#define ADC_TR_HT_Pos              (16U)      
-#define ADC_TR_HT_Msk              (0xFFFUL << ADC_TR_HT_Pos)                   /*!< 0x0FFF0000 */
-#define ADC_TR_HT                  ADC_TR_HT_Msk                               /*!< Analog watchdog high threshold */
-#define ADC_TR_LT_Pos              (0U)       
-#define ADC_TR_LT_Msk              (0xFFFUL << ADC_TR_LT_Pos)                   /*!< 0x00000FFF */
-#define ADC_TR_LT                  ADC_TR_LT_Msk                               /*!< Analog watchdog low threshold */
-
-/******************  Bit definition for ADC_CHSELR register  ******************/
-#define ADC_CHSELR_CHSEL_Pos       (0U)       
-#define ADC_CHSELR_CHSEL_Msk       (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos)          /*!< 0x0007FFFF */
-#define ADC_CHSELR_CHSEL           ADC_CHSELR_CHSEL_Msk                        /*!< ADC group regular sequencer channels */
-#define ADC_CHSELR_CHSEL18_Pos     (18U)      
-#define ADC_CHSELR_CHSEL18_Msk     (0x1UL << ADC_CHSELR_CHSEL18_Pos)            /*!< 0x00040000 */
-#define ADC_CHSELR_CHSEL18         ADC_CHSELR_CHSEL18_Msk                      /*!< Channel 18 selection */
-#define ADC_CHSELR_CHSEL17_Pos     (17U)      
-#define ADC_CHSELR_CHSEL17_Msk     (0x1UL << ADC_CHSELR_CHSEL17_Pos)            /*!< 0x00020000 */
-#define ADC_CHSELR_CHSEL17         ADC_CHSELR_CHSEL17_Msk                      /*!< Channel 17 selection */
-#define ADC_CHSELR_CHSEL15_Pos     (15U)      
-#define ADC_CHSELR_CHSEL15_Msk     (0x1UL << ADC_CHSELR_CHSEL15_Pos)            /*!< 0x00008000 */
-#define ADC_CHSELR_CHSEL15         ADC_CHSELR_CHSEL15_Msk                      /*!< Channel 15 selection */
-#define ADC_CHSELR_CHSEL14_Pos     (14U)      
-#define ADC_CHSELR_CHSEL14_Msk     (0x1UL << ADC_CHSELR_CHSEL14_Pos)            /*!< 0x00004000 */
-#define ADC_CHSELR_CHSEL14         ADC_CHSELR_CHSEL14_Msk                      /*!< Channel 14 selection */
-#define ADC_CHSELR_CHSEL13_Pos     (13U)      
-#define ADC_CHSELR_CHSEL13_Msk     (0x1UL << ADC_CHSELR_CHSEL13_Pos)            /*!< 0x00002000 */
-#define ADC_CHSELR_CHSEL13         ADC_CHSELR_CHSEL13_Msk                      /*!< Channel 13 selection */
-#define ADC_CHSELR_CHSEL12_Pos     (12U)      
-#define ADC_CHSELR_CHSEL12_Msk     (0x1UL << ADC_CHSELR_CHSEL12_Pos)            /*!< 0x00001000 */
-#define ADC_CHSELR_CHSEL12         ADC_CHSELR_CHSEL12_Msk                      /*!< Channel 12 selection */
-#define ADC_CHSELR_CHSEL11_Pos     (11U)      
-#define ADC_CHSELR_CHSEL11_Msk     (0x1UL << ADC_CHSELR_CHSEL11_Pos)            /*!< 0x00000800 */
-#define ADC_CHSELR_CHSEL11         ADC_CHSELR_CHSEL11_Msk                      /*!< Channel 11 selection */
-#define ADC_CHSELR_CHSEL10_Pos     (10U)      
-#define ADC_CHSELR_CHSEL10_Msk     (0x1UL << ADC_CHSELR_CHSEL10_Pos)            /*!< 0x00000400 */
-#define ADC_CHSELR_CHSEL10         ADC_CHSELR_CHSEL10_Msk                      /*!< Channel 10 selection */
-#define ADC_CHSELR_CHSEL9_Pos      (9U)       
-#define ADC_CHSELR_CHSEL9_Msk      (0x1UL << ADC_CHSELR_CHSEL9_Pos)             /*!< 0x00000200 */
-#define ADC_CHSELR_CHSEL9          ADC_CHSELR_CHSEL9_Msk                       /*!< Channel 9 selection */
-#define ADC_CHSELR_CHSEL8_Pos      (8U)       
-#define ADC_CHSELR_CHSEL8_Msk      (0x1UL << ADC_CHSELR_CHSEL8_Pos)             /*!< 0x00000100 */
-#define ADC_CHSELR_CHSEL8          ADC_CHSELR_CHSEL8_Msk                       /*!< Channel 8 selection */
-#define ADC_CHSELR_CHSEL7_Pos      (7U)       
-#define ADC_CHSELR_CHSEL7_Msk      (0x1UL << ADC_CHSELR_CHSEL7_Pos)             /*!< 0x00000080 */
-#define ADC_CHSELR_CHSEL7          ADC_CHSELR_CHSEL7_Msk                       /*!< Channel 7 selection */
-#define ADC_CHSELR_CHSEL6_Pos      (6U)       
-#define ADC_CHSELR_CHSEL6_Msk      (0x1UL << ADC_CHSELR_CHSEL6_Pos)             /*!< 0x00000040 */
-#define ADC_CHSELR_CHSEL6          ADC_CHSELR_CHSEL6_Msk                       /*!< Channel 6 selection */
-#define ADC_CHSELR_CHSEL5_Pos      (5U)       
-#define ADC_CHSELR_CHSEL5_Msk      (0x1UL << ADC_CHSELR_CHSEL5_Pos)             /*!< 0x00000020 */
-#define ADC_CHSELR_CHSEL5          ADC_CHSELR_CHSEL5_Msk                       /*!< Channel 5 selection */
-#define ADC_CHSELR_CHSEL4_Pos      (4U)       
-#define ADC_CHSELR_CHSEL4_Msk      (0x1UL << ADC_CHSELR_CHSEL4_Pos)             /*!< 0x00000010 */
-#define ADC_CHSELR_CHSEL4          ADC_CHSELR_CHSEL4_Msk                       /*!< Channel 4 selection */
-#define ADC_CHSELR_CHSEL3_Pos      (3U)       
-#define ADC_CHSELR_CHSEL3_Msk      (0x1UL << ADC_CHSELR_CHSEL3_Pos)             /*!< 0x00000008 */
-#define ADC_CHSELR_CHSEL3          ADC_CHSELR_CHSEL3_Msk                       /*!< Channel 3 selection */
-#define ADC_CHSELR_CHSEL2_Pos      (2U)       
-#define ADC_CHSELR_CHSEL2_Msk      (0x1UL << ADC_CHSELR_CHSEL2_Pos)             /*!< 0x00000004 */
-#define ADC_CHSELR_CHSEL2          ADC_CHSELR_CHSEL2_Msk                       /*!< Channel 2 selection */
-#define ADC_CHSELR_CHSEL1_Pos      (1U)       
-#define ADC_CHSELR_CHSEL1_Msk      (0x1UL << ADC_CHSELR_CHSEL1_Pos)             /*!< 0x00000002 */
-#define ADC_CHSELR_CHSEL1          ADC_CHSELR_CHSEL1_Msk                       /*!< Channel 1 selection */
-#define ADC_CHSELR_CHSEL0_Pos      (0U)       
-#define ADC_CHSELR_CHSEL0_Msk      (0x1UL << ADC_CHSELR_CHSEL0_Pos)             /*!< 0x00000001 */
-#define ADC_CHSELR_CHSEL0          ADC_CHSELR_CHSEL0_Msk                       /*!< Channel 0 selection */
-
-/********************  Bit definition for ADC_DR register  ********************/
-#define ADC_DR_DATA_Pos            (0U)       
-#define ADC_DR_DATA_Msk            (0xFFFFUL << ADC_DR_DATA_Pos)                /*!< 0x0000FFFF */
-#define ADC_DR_DATA                ADC_DR_DATA_Msk                             /*!< Regular data */
-
-/********************  Bit definition for ADC_CALFACT register  ********************/
-#define ADC_CALFACT_CALFACT_Pos    (0U)       
-#define ADC_CALFACT_CALFACT_Msk    (0x7FUL << ADC_CALFACT_CALFACT_Pos)          /*!< 0x0000007F */
-#define ADC_CALFACT_CALFACT        ADC_CALFACT_CALFACT_Msk                     /*!< Calibration factor */
-
-/*******************  Bit definition for ADC_CCR register  ********************/
-#define ADC_CCR_LFMEN_Pos          (25U)      
-#define ADC_CCR_LFMEN_Msk          (0x1UL << ADC_CCR_LFMEN_Pos)                 /*!< 0x02000000 */
-#define ADC_CCR_LFMEN              ADC_CCR_LFMEN_Msk                           /*!< Low Frequency Mode enable */
-#define ADC_CCR_TSEN_Pos           (23U)      
-#define ADC_CCR_TSEN_Msk           (0x1UL << ADC_CCR_TSEN_Pos)                  /*!< 0x00800000 */
-#define ADC_CCR_TSEN               ADC_CCR_TSEN_Msk                            /*!< Temperature sensore enable */
-#define ADC_CCR_VREFEN_Pos         (22U)      
-#define ADC_CCR_VREFEN_Msk         (0x1UL << ADC_CCR_VREFEN_Pos)                /*!< 0x00400000 */
-#define ADC_CCR_VREFEN             ADC_CCR_VREFEN_Msk                          /*!< Vrefint enable */
-#define ADC_CCR_PRESC_Pos          (18U)      
-#define ADC_CCR_PRESC_Msk          (0xFUL << ADC_CCR_PRESC_Pos)                 /*!< 0x003C0000 */
-#define ADC_CCR_PRESC              ADC_CCR_PRESC_Msk                           /*!< PRESC  [3:0] bits (ADC prescaler) */
-#define ADC_CCR_PRESC_0            (0x1UL << ADC_CCR_PRESC_Pos)                 /*!< 0x00040000 */
-#define ADC_CCR_PRESC_1            (0x2UL << ADC_CCR_PRESC_Pos)                 /*!< 0x00080000 */
-#define ADC_CCR_PRESC_2            (0x4UL << ADC_CCR_PRESC_Pos)                 /*!< 0x00100000 */
-#define ADC_CCR_PRESC_3            (0x8UL << ADC_CCR_PRESC_Pos)                 /*!< 0x00200000 */
-
-/******************************************************************************/
-/*                                                                            */
-/*                       Advanced Encryption Standard (AES)                   */
-/*                                                                            */
-/******************************************************************************/
-/*******************  Bit definition for AES_CR register  *********************/
-#define AES_CR_EN_Pos            (0U)         
-#define AES_CR_EN_Msk            (0x1UL << AES_CR_EN_Pos)                       /*!< 0x00000001 */
-#define AES_CR_EN                AES_CR_EN_Msk                                 /*!< AES Enable */
-#define AES_CR_DATATYPE_Pos      (1U)         
-#define AES_CR_DATATYPE_Msk      (0x3UL << AES_CR_DATATYPE_Pos)                 /*!< 0x00000006 */
-#define AES_CR_DATATYPE          AES_CR_DATATYPE_Msk                           /*!< Data type selection */
-#define AES_CR_DATATYPE_0        (0x1UL << AES_CR_DATATYPE_Pos)                 /*!< 0x00000002 */
-#define AES_CR_DATATYPE_1        (0x2UL << AES_CR_DATATYPE_Pos)                 /*!< 0x00000004 */
-
-#define AES_CR_MODE_Pos          (3U)         
-#define AES_CR_MODE_Msk          (0x3UL << AES_CR_MODE_Pos)                     /*!< 0x00000018 */
-#define AES_CR_MODE              AES_CR_MODE_Msk                               /*!< AES Mode Of Operation */
-#define AES_CR_MODE_0            (0x1UL << AES_CR_MODE_Pos)                     /*!< 0x00000008 */
-#define AES_CR_MODE_1            (0x2UL << AES_CR_MODE_Pos)                     /*!< 0x00000010 */
-
-#define AES_CR_CHMOD_Pos         (5U)         
-#define AES_CR_CHMOD_Msk         (0x3UL << AES_CR_CHMOD_Pos)                    /*!< 0x00000060 */
-#define AES_CR_CHMOD             AES_CR_CHMOD_Msk                              /*!< AES Chaining Mode */
-#define AES_CR_CHMOD_0           (0x1UL << AES_CR_CHMOD_Pos)                    /*!< 0x00000020 */
-#define AES_CR_CHMOD_1           (0x2UL << AES_CR_CHMOD_Pos)                    /*!< 0x00000040 */
-
-#define AES_CR_CCFC_Pos          (7U)         
-#define AES_CR_CCFC_Msk          (0x1UL << AES_CR_CCFC_Pos)                     /*!< 0x00000080 */
-#define AES_CR_CCFC              AES_CR_CCFC_Msk                               /*!< Computation Complete Flag Clear */
-#define AES_CR_ERRC_Pos          (8U)         
-#define AES_CR_ERRC_Msk          (0x1UL << AES_CR_ERRC_Pos)                     /*!< 0x00000100 */
-#define AES_CR_ERRC              AES_CR_ERRC_Msk                               /*!< Error Clear */
-#define AES_CR_CCIE_Pos          (9U)         
-#define AES_CR_CCIE_Msk          (0x1UL << AES_CR_CCIE_Pos)                     /*!< 0x00000200 */
-#define AES_CR_CCIE              AES_CR_CCIE_Msk                               /*!< Computation Complete Interrupt Enable */
-#define AES_CR_ERRIE_Pos         (10U)        
-#define AES_CR_ERRIE_Msk         (0x1UL << AES_CR_ERRIE_Pos)                    /*!< 0x00000400 */
-#define AES_CR_ERRIE             AES_CR_ERRIE_Msk                              /*!< Error Interrupt Enable */
-#define AES_CR_DMAINEN_Pos       (11U)        
-#define AES_CR_DMAINEN_Msk       (0x1UL << AES_CR_DMAINEN_Pos)                  /*!< 0x00000800 */
-#define AES_CR_DMAINEN           AES_CR_DMAINEN_Msk                            /*!< DMA ENable managing the data input phase */
-#define AES_CR_DMAOUTEN_Pos      (12U)        
-#define AES_CR_DMAOUTEN_Msk      (0x1UL << AES_CR_DMAOUTEN_Pos)                 /*!< 0x00001000 */
-#define AES_CR_DMAOUTEN          AES_CR_DMAOUTEN_Msk                           /*!< DMA Enable managing the data output phase */
-
-/*******************  Bit definition for AES_SR register  *********************/
-#define AES_SR_CCF_Pos           (0U)         
-#define AES_SR_CCF_Msk           (0x1UL << AES_SR_CCF_Pos)                      /*!< 0x00000001 */
-#define AES_SR_CCF               AES_SR_CCF_Msk                                /*!< Computation Complete Flag */
-#define AES_SR_RDERR_Pos         (1U)         
-#define AES_SR_RDERR_Msk         (0x1UL << AES_SR_RDERR_Pos)                    /*!< 0x00000002 */
-#define AES_SR_RDERR             AES_SR_RDERR_Msk                              /*!< Read Error Flag */
-#define AES_SR_WRERR_Pos         (2U)         
-#define AES_SR_WRERR_Msk         (0x1UL << AES_SR_WRERR_Pos)                    /*!< 0x00000004 */
-#define AES_SR_WRERR             AES_SR_WRERR_Msk                              /*!< Write Error Flag */
-
-/*******************  Bit definition for AES_DINR register  *******************/
-#define AES_DINR_Pos             (0U)         
-#define AES_DINR_Msk             (0xFFFFUL << AES_DINR_Pos)                     /*!< 0x0000FFFF */
-#define AES_DINR                 AES_DINR_Msk                                  /*!< AES Data Input Register */
-
-/*******************  Bit definition for AES_DOUTR register  ******************/
-#define AES_DOUTR_Pos            (0U)         
-#define AES_DOUTR_Msk            (0xFFFFUL << AES_DOUTR_Pos)                    /*!< 0x0000FFFF */
-#define AES_DOUTR                AES_DOUTR_Msk                                 /*!< AES Data Output Register */
-
-/*******************  Bit definition for AES_KEYR0 register  ******************/
-#define AES_KEYR0_Pos            (0U)         
-#define AES_KEYR0_Msk            (0xFFFFUL << AES_KEYR0_Pos)                    /*!< 0x0000FFFF */
-#define AES_KEYR0                AES_KEYR0_Msk                                 /*!< AES Key Register 0 */
-
-/*******************  Bit definition for AES_KEYR1 register  ******************/
-#define AES_KEYR1_Pos            (0U)         
-#define AES_KEYR1_Msk            (0xFFFFUL << AES_KEYR1_Pos)                    /*!< 0x0000FFFF */
-#define AES_KEYR1                AES_KEYR1_Msk                                 /*!< AES Key Register 1 */
-
-/*******************  Bit definition for AES_KEYR2 register  ******************/
-#define AES_KEYR2_Pos            (0U)         
-#define AES_KEYR2_Msk            (0xFFFFUL << AES_KEYR2_Pos)                    /*!< 0x0000FFFF */
-#define AES_KEYR2                AES_KEYR2_Msk                                 /*!< AES Key Register 2 */
-
-/*******************  Bit definition for AES_KEYR3 register  ******************/
-#define AES_KEYR3_Pos            (0U)         
-#define AES_KEYR3_Msk            (0xFFFFUL << AES_KEYR3_Pos)                    /*!< 0x0000FFFF */
-#define AES_KEYR3                AES_KEYR3_Msk                                 /*!< AES Key Register 3 */
-
-/*******************  Bit definition for AES_IVR0 register  *******************/
-#define AES_IVR0_Pos             (0U)         
-#define AES_IVR0_Msk             (0xFFFFUL << AES_IVR0_Pos)                     /*!< 0x0000FFFF */
-#define AES_IVR0                 AES_IVR0_Msk                                  /*!< AES Initialization Vector Register 0 */
-
-/*******************  Bit definition for AES_IVR1 register  *******************/
-#define AES_IVR1_Pos             (0U)         
-#define AES_IVR1_Msk             (0xFFFFUL << AES_IVR1_Pos)                     /*!< 0x0000FFFF */
-#define AES_IVR1                 AES_IVR1_Msk                                  /*!< AES Initialization Vector Register 1 */
-
-/*******************  Bit definition for AES_IVR2 register  *******************/
-#define AES_IVR2_Pos             (0U)         
-#define AES_IVR2_Msk             (0xFFFFUL << AES_IVR2_Pos)                     /*!< 0x0000FFFF */
-#define AES_IVR2                 AES_IVR2_Msk                                  /*!< AES Initialization Vector Register 2 */
-
-/*******************  Bit definition for AES_IVR3 register  *******************/
-#define AES_IVR3_Pos             (0U)         
-#define AES_IVR3_Msk             (0xFFFFUL << AES_IVR3_Pos)                     /*!< 0x0000FFFF */
-#define AES_IVR3                 AES_IVR3_Msk                                  /*!< AES Initialization Vector Register 3 */
-
-/******************************************************************************/
-/*                                                                            */
-/*                      Analog Comparators (COMP)                             */
-/*                                                                            */
-/******************************************************************************/
-/*************  Bit definition for COMP_CSR register (COMP1 and COMP2)  **************/
-/* COMP1 bits definition */
-#define COMP_CSR_COMP1EN_Pos           (0U)   
-#define COMP_CSR_COMP1EN_Msk           (0x1UL << COMP_CSR_COMP1EN_Pos)          /*!< 0x00000001 */
-#define COMP_CSR_COMP1EN               COMP_CSR_COMP1EN_Msk                    /*!< COMP1 enable */
-#define COMP_CSR_COMP1INNSEL_Pos       (4U)   
-#define COMP_CSR_COMP1INNSEL_Msk       (0x3UL << COMP_CSR_COMP1INNSEL_Pos)      /*!< 0x00000030 */
-#define COMP_CSR_COMP1INNSEL           COMP_CSR_COMP1INNSEL_Msk                /*!< COMP1 inverting input select */
-#define COMP_CSR_COMP1INNSEL_0         (0x1UL << COMP_CSR_COMP1INNSEL_Pos)      /*!< 0x00000010 */
-#define COMP_CSR_COMP1INNSEL_1         (0x2UL << COMP_CSR_COMP1INNSEL_Pos)      /*!< 0x00000020 */
-#define COMP_CSR_COMP1WM_Pos           (8U)   
-#define COMP_CSR_COMP1WM_Msk           (0x1UL << COMP_CSR_COMP1WM_Pos)          /*!< 0x00000100 */
-#define COMP_CSR_COMP1WM               COMP_CSR_COMP1WM_Msk                    /*!< Comparators window mode enable */
-#define COMP_CSR_COMP1LPTIM1IN1_Pos    (12U)  
-#define COMP_CSR_COMP1LPTIM1IN1_Msk    (0x1UL << COMP_CSR_COMP1LPTIM1IN1_Pos)   /*!< 0x00001000 */
-#define COMP_CSR_COMP1LPTIM1IN1        COMP_CSR_COMP1LPTIM1IN1_Msk             /*!< COMP1 LPTIM1 IN1 connection */
-#define COMP_CSR_COMP1POLARITY_Pos     (15U)  
-#define COMP_CSR_COMP1POLARITY_Msk     (0x1UL << COMP_CSR_COMP1POLARITY_Pos)    /*!< 0x00008000 */
-#define COMP_CSR_COMP1POLARITY         COMP_CSR_COMP1POLARITY_Msk              /*!< COMP1 output polarity */
-#define COMP_CSR_COMP1VALUE_Pos        (30U)  
-#define COMP_CSR_COMP1VALUE_Msk        (0x1UL << COMP_CSR_COMP1VALUE_Pos)       /*!< 0x40000000 */
-#define COMP_CSR_COMP1VALUE            COMP_CSR_COMP1VALUE_Msk                 /*!< COMP1 output level */
-#define COMP_CSR_COMP1LOCK_Pos         (31U)  
-#define COMP_CSR_COMP1LOCK_Msk         (0x1UL << COMP_CSR_COMP1LOCK_Pos)        /*!< 0x80000000 */
-#define COMP_CSR_COMP1LOCK             COMP_CSR_COMP1LOCK_Msk                  /*!< COMP1 lock */
-/* COMP2 bits definition */
-#define COMP_CSR_COMP2EN_Pos           (0U)   
-#define COMP_CSR_COMP2EN_Msk           (0x1UL << COMP_CSR_COMP2EN_Pos)          /*!< 0x00000001 */
-#define COMP_CSR_COMP2EN               COMP_CSR_COMP2EN_Msk                    /*!< COMP2 enable */
-#define COMP_CSR_COMP2SPEED_Pos        (3U)   
-#define COMP_CSR_COMP2SPEED_Msk        (0x1UL << COMP_CSR_COMP2SPEED_Pos)       /*!< 0x00000008 */
-#define COMP_CSR_COMP2SPEED            COMP_CSR_COMP2SPEED_Msk                 /*!< COMP2 power mode */
-#define COMP_CSR_COMP2INNSEL_Pos       (4U)   
-#define COMP_CSR_COMP2INNSEL_Msk       (0x7UL << COMP_CSR_COMP2INNSEL_Pos)      /*!< 0x00000070 */
-#define COMP_CSR_COMP2INNSEL           COMP_CSR_COMP2INNSEL_Msk                /*!< COMP2 inverting input select */
-#define COMP_CSR_COMP2INNSEL_0         (0x1UL << COMP_CSR_COMP2INNSEL_Pos)      /*!< 0x00000010 */
-#define COMP_CSR_COMP2INNSEL_1         (0x2UL << COMP_CSR_COMP2INNSEL_Pos)      /*!< 0x00000020 */
-#define COMP_CSR_COMP2INNSEL_2         (0x4UL << COMP_CSR_COMP2INNSEL_Pos)      /*!< 0x00000040 */
-#define COMP_CSR_COMP2INPSEL_Pos       (8U)   
-#define COMP_CSR_COMP2INPSEL_Msk       (0x7UL << COMP_CSR_COMP2INPSEL_Pos)      /*!< 0x00000700 */
-#define COMP_CSR_COMP2INPSEL           COMP_CSR_COMP2INPSEL_Msk                /*!< COMPx non inverting input select */
-#define COMP_CSR_COMP2INPSEL_0         (0x1UL << COMP_CSR_COMP2INPSEL_Pos)      /*!< 0x00000100 */
-#define COMP_CSR_COMP2INPSEL_1         (0x2UL << COMP_CSR_COMP2INPSEL_Pos)      /*!< 0x00000200 */
-#define COMP_CSR_COMP2INPSEL_2         (0x4UL << COMP_CSR_COMP2INPSEL_Pos)      /*!< 0x00000400 */
-#define COMP_CSR_COMP2LPTIM1IN2_Pos    (12U)  
-#define COMP_CSR_COMP2LPTIM1IN2_Msk    (0x1UL << COMP_CSR_COMP2LPTIM1IN2_Pos)   /*!< 0x00001000 */
-#define COMP_CSR_COMP2LPTIM1IN2        COMP_CSR_COMP2LPTIM1IN2_Msk             /*!< COMP2 LPTIM1 IN2 connection */
-#define COMP_CSR_COMP2LPTIM1IN1_Pos    (13U)  
-#define COMP_CSR_COMP2LPTIM1IN1_Msk    (0x1UL << COMP_CSR_COMP2LPTIM1IN1_Pos)   /*!< 0x00002000 */
-#define COMP_CSR_COMP2LPTIM1IN1        COMP_CSR_COMP2LPTIM1IN1_Msk             /*!< COMP2 LPTIM1 IN1 connection */
-#define COMP_CSR_COMP2POLARITY_Pos     (15U)  
-#define COMP_CSR_COMP2POLARITY_Msk     (0x1UL << COMP_CSR_COMP2POLARITY_Pos)    /*!< 0x00008000 */
-#define COMP_CSR_COMP2POLARITY         COMP_CSR_COMP2POLARITY_Msk              /*!< COMP2 output polarity */
-#define COMP_CSR_COMP2VALUE_Pos        (30U)  
-#define COMP_CSR_COMP2VALUE_Msk        (0x1UL << COMP_CSR_COMP2VALUE_Pos)       /*!< 0x40000000 */
-#define COMP_CSR_COMP2VALUE            COMP_CSR_COMP2VALUE_Msk                 /*!< COMP2 output level */
-#define COMP_CSR_COMP2LOCK_Pos         (31U)  
-#define COMP_CSR_COMP2LOCK_Msk         (0x1UL << COMP_CSR_COMP2LOCK_Pos)        /*!< 0x80000000 */
-#define COMP_CSR_COMP2LOCK             COMP_CSR_COMP2LOCK_Msk                  /*!< COMP2 lock */
-
-/**********************  Bit definition for COMP_CSR register common  ****************/
-#define COMP_CSR_COMPxEN_Pos           (0U)   
-#define COMP_CSR_COMPxEN_Msk           (0x1UL << COMP_CSR_COMPxEN_Pos)          /*!< 0x00000001 */
-#define COMP_CSR_COMPxEN               COMP_CSR_COMPxEN_Msk                    /*!< COMPx enable */
-#define COMP_CSR_COMPxPOLARITY_Pos     (15U)  
-#define COMP_CSR_COMPxPOLARITY_Msk     (0x1UL << COMP_CSR_COMPxPOLARITY_Pos)    /*!< 0x00008000 */
-#define COMP_CSR_COMPxPOLARITY         COMP_CSR_COMPxPOLARITY_Msk              /*!< COMPx output polarity */
-#define COMP_CSR_COMPxOUTVALUE_Pos     (30U)  
-#define COMP_CSR_COMPxOUTVALUE_Msk     (0x1UL << COMP_CSR_COMPxOUTVALUE_Pos)    /*!< 0x40000000 */
-#define COMP_CSR_COMPxOUTVALUE         COMP_CSR_COMPxOUTVALUE_Msk              /*!< COMPx output level */
-#define COMP_CSR_COMPxLOCK_Pos         (31U)  
-#define COMP_CSR_COMPxLOCK_Msk         (0x1UL << COMP_CSR_COMPxLOCK_Pos)        /*!< 0x80000000 */
-#define COMP_CSR_COMPxLOCK             COMP_CSR_COMPxLOCK_Msk                  /*!< COMPx lock */
-
-/* Reference defines */
-#define COMP_CSR_WINMODE   COMP_CSR_COMP1WM /*!< Bit intended to be used with COMP common instance (COMP_Common_TypeDef)  */
-
-/******************************************************************************/
-/*                                                                            */
-/*                       CRC calculation unit (CRC)                           */
-/*                                                                            */
-/******************************************************************************/
-/*******************  Bit definition for CRC_DR register  *********************/
-#define CRC_DR_DR_Pos            (0U)         
-#define CRC_DR_DR_Msk            (0xFFFFFFFFUL << CRC_DR_DR_Pos)                /*!< 0xFFFFFFFF */
-#define CRC_DR_DR                CRC_DR_DR_Msk                                 /*!< Data register bits */
-
-/*******************  Bit definition for CRC_IDR register  ********************/
-#define CRC_IDR_IDR              (0xFFU)                                       /*!< General-purpose 8-bit data register bits */
-
-/********************  Bit definition for CRC_CR register  ********************/
-#define CRC_CR_RESET_Pos         (0U)         
-#define CRC_CR_RESET_Msk         (0x1UL << CRC_CR_RESET_Pos)                    /*!< 0x00000001 */
-#define CRC_CR_RESET             CRC_CR_RESET_Msk                              /*!< RESET the CRC computation unit bit */
-#define CRC_CR_POLYSIZE_Pos      (3U)         
-#define CRC_CR_POLYSIZE_Msk      (0x3UL << CRC_CR_POLYSIZE_Pos)                 /*!< 0x00000018 */
-#define CRC_CR_POLYSIZE          CRC_CR_POLYSIZE_Msk                           /*!< Polynomial size bits */
-#define CRC_CR_POLYSIZE_0        (0x1UL << CRC_CR_POLYSIZE_Pos)                 /*!< 0x00000008 */
-#define CRC_CR_POLYSIZE_1        (0x2UL << CRC_CR_POLYSIZE_Pos)                 /*!< 0x00000010 */
-#define CRC_CR_REV_IN_Pos        (5U)         
-#define CRC_CR_REV_IN_Msk        (0x3UL << CRC_CR_REV_IN_Pos)                   /*!< 0x00000060 */
-#define CRC_CR_REV_IN            CRC_CR_REV_IN_Msk                             /*!< REV_IN Reverse Input Data bits */
-#define CRC_CR_REV_IN_0          (0x1UL << CRC_CR_REV_IN_Pos)                   /*!< 0x00000020 */
-#define CRC_CR_REV_IN_1          (0x2UL << CRC_CR_REV_IN_Pos)                   /*!< 0x00000040 */
-#define CRC_CR_REV_OUT_Pos       (7U)         
-#define CRC_CR_REV_OUT_Msk       (0x1UL << CRC_CR_REV_OUT_Pos)                  /*!< 0x00000080 */
-#define CRC_CR_REV_OUT           CRC_CR_REV_OUT_Msk                            /*!< REV_OUT Reverse Output Data bits */
-
-/*******************  Bit definition for CRC_INIT register  *******************/
-#define CRC_INIT_INIT_Pos        (0U)         
-#define CRC_INIT_INIT_Msk        (0xFFFFFFFFUL << CRC_INIT_INIT_Pos)            /*!< 0xFFFFFFFF */
-#define CRC_INIT_INIT            CRC_INIT_INIT_Msk                             /*!< Initial CRC value bits */
-
-/*******************  Bit definition for CRC_POL register  ********************/
-#define CRC_POL_POL_Pos          (0U)         
-#define CRC_POL_POL_Msk          (0xFFFFFFFFUL << CRC_POL_POL_Pos)              /*!< 0xFFFFFFFF */
-#define CRC_POL_POL              CRC_POL_POL_Msk                               /*!< Coefficients of the polynomial */
-
-/******************************************************************************/
-/*                                                                            */
-/*                           Debug MCU (DBGMCU)                               */
-/*                                                                            */
-/******************************************************************************/
-
-/****************  Bit definition for DBGMCU_IDCODE register  *****************/
-#define DBGMCU_IDCODE_DEV_ID_Pos               (0U)                            
-#define DBGMCU_IDCODE_DEV_ID_Msk               (0xFFFUL << DBGMCU_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */
-#define DBGMCU_IDCODE_DEV_ID                   DBGMCU_IDCODE_DEV_ID_Msk        /*!< Device Identifier */
-
-#define DBGMCU_IDCODE_REV_ID_Pos               (16U)                           
-#define DBGMCU_IDCODE_REV_ID_Msk               (0xFFFFUL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */
-#define DBGMCU_IDCODE_REV_ID                   DBGMCU_IDCODE_REV_ID_Msk        /*!< REV_ID[15:0] bits (Revision Identifier) */
-#define DBGMCU_IDCODE_REV_ID_0                 (0x0001UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00010000 */
-#define DBGMCU_IDCODE_REV_ID_1                 (0x0002UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00020000 */
-#define DBGMCU_IDCODE_REV_ID_2                 (0x0004UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00040000 */
-#define DBGMCU_IDCODE_REV_ID_3                 (0x0008UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00080000 */
-#define DBGMCU_IDCODE_REV_ID_4                 (0x0010UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00100000 */
-#define DBGMCU_IDCODE_REV_ID_5                 (0x0020UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00200000 */
-#define DBGMCU_IDCODE_REV_ID_6                 (0x0040UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00400000 */
-#define DBGMCU_IDCODE_REV_ID_7                 (0x0080UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00800000 */
-#define DBGMCU_IDCODE_REV_ID_8                 (0x0100UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x01000000 */
-#define DBGMCU_IDCODE_REV_ID_9                 (0x0200UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x02000000 */
-#define DBGMCU_IDCODE_REV_ID_10                (0x0400UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x04000000 */
-#define DBGMCU_IDCODE_REV_ID_11                (0x0800UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x08000000 */
-#define DBGMCU_IDCODE_REV_ID_12                (0x1000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x10000000 */
-#define DBGMCU_IDCODE_REV_ID_13                (0x2000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x20000000 */
-#define DBGMCU_IDCODE_REV_ID_14                (0x4000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x40000000 */
-#define DBGMCU_IDCODE_REV_ID_15                (0x8000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x80000000 */
-
-/******************  Bit definition for DBGMCU_CR register  *******************/
-#define DBGMCU_CR_DBG_Pos                      (0U)                            
-#define DBGMCU_CR_DBG_Msk                      (0x7UL << DBGMCU_CR_DBG_Pos)     /*!< 0x00000007 */
-#define DBGMCU_CR_DBG                          DBGMCU_CR_DBG_Msk               /*!< Debug mode mask */
-#define DBGMCU_CR_DBG_SLEEP_Pos                (0U)                            
-#define DBGMCU_CR_DBG_SLEEP_Msk                (0x1UL << DBGMCU_CR_DBG_SLEEP_Pos) /*!< 0x00000001 */
-#define DBGMCU_CR_DBG_SLEEP                    DBGMCU_CR_DBG_SLEEP_Msk         /*!< Debug Sleep Mode */
-#define DBGMCU_CR_DBG_STOP_Pos                 (1U)                            
-#define DBGMCU_CR_DBG_STOP_Msk                 (0x1UL << DBGMCU_CR_DBG_STOP_Pos) /*!< 0x00000002 */
-#define DBGMCU_CR_DBG_STOP                     DBGMCU_CR_DBG_STOP_Msk          /*!< Debug Stop Mode */
-#define DBGMCU_CR_DBG_STANDBY_Pos              (2U)                            
-#define DBGMCU_CR_DBG_STANDBY_Msk              (0x1UL << DBGMCU_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */
-#define DBGMCU_CR_DBG_STANDBY                  DBGMCU_CR_DBG_STANDBY_Msk       /*!< Debug Standby mode */
-
-/******************  Bit definition for DBGMCU_APB1_FZ register  **************/
-#define DBGMCU_APB1_FZ_DBG_TIM2_STOP_Pos       (0U)                            
-#define DBGMCU_APB1_FZ_DBG_TIM2_STOP_Msk       (0x1UL << DBGMCU_APB1_FZ_DBG_TIM2_STOP_Pos) /*!< 0x00000001 */
-#define DBGMCU_APB1_FZ_DBG_TIM2_STOP           DBGMCU_APB1_FZ_DBG_TIM2_STOP_Msk /*!< TIM2 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM6_STOP_Pos       (4U)                            
-#define DBGMCU_APB1_FZ_DBG_TIM6_STOP_Msk       (0x1UL << DBGMCU_APB1_FZ_DBG_TIM6_STOP_Pos) /*!< 0x00000010 */
-#define DBGMCU_APB1_FZ_DBG_TIM6_STOP           DBGMCU_APB1_FZ_DBG_TIM6_STOP_Msk /*!< TIM6 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_RTC_STOP_Pos        (10U)                           
-#define DBGMCU_APB1_FZ_DBG_RTC_STOP_Msk        (0x1UL << DBGMCU_APB1_FZ_DBG_RTC_STOP_Pos) /*!< 0x00000400 */
-#define DBGMCU_APB1_FZ_DBG_RTC_STOP            DBGMCU_APB1_FZ_DBG_RTC_STOP_Msk /*!< RTC Calendar frozen when core is halted */
-#define DBGMCU_APB1_FZ_DBG_WWDG_STOP_Pos       (11U)                           
-#define DBGMCU_APB1_FZ_DBG_WWDG_STOP_Msk       (0x1UL << DBGMCU_APB1_FZ_DBG_WWDG_STOP_Pos) /*!< 0x00000800 */
-#define DBGMCU_APB1_FZ_DBG_WWDG_STOP           DBGMCU_APB1_FZ_DBG_WWDG_STOP_Msk /*!< Debug Window Watchdog stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_IWDG_STOP_Pos       (12U)                           
-#define DBGMCU_APB1_FZ_DBG_IWDG_STOP_Msk       (0x1UL << DBGMCU_APB1_FZ_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */
-#define DBGMCU_APB1_FZ_DBG_IWDG_STOP           DBGMCU_APB1_FZ_DBG_IWDG_STOP_Msk /*!< Debug Independent Watchdog stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_I2C1_STOP_Pos       (21U)                           
-#define DBGMCU_APB1_FZ_DBG_I2C1_STOP_Msk       (0x1UL << DBGMCU_APB1_FZ_DBG_I2C1_STOP_Pos) /*!< 0x00200000 */
-#define DBGMCU_APB1_FZ_DBG_I2C1_STOP           DBGMCU_APB1_FZ_DBG_I2C1_STOP_Msk /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_I2C2_STOP_Pos       (22U)                           
-#define DBGMCU_APB1_FZ_DBG_I2C2_STOP_Msk       (0x1UL << DBGMCU_APB1_FZ_DBG_I2C2_STOP_Pos) /*!< 0x00400000 */
-#define DBGMCU_APB1_FZ_DBG_I2C2_STOP           DBGMCU_APB1_FZ_DBG_I2C2_STOP_Msk /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Pos    (31U)                           
-#define DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Msk    (0x1UL << DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Pos) /*!< 0x80000000 */
-#define DBGMCU_APB1_FZ_DBG_LPTIMER_STOP        DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Msk /*!< LPTIM1 counter stopped when core is halted */
-/******************  Bit definition for DBGMCU_APB2_FZ register  **************/
-#define DBGMCU_APB2_FZ_DBG_TIM22_STOP_Pos      (5U)                            
-#define DBGMCU_APB2_FZ_DBG_TIM22_STOP_Msk      (0x1UL << DBGMCU_APB2_FZ_DBG_TIM22_STOP_Pos) /*!< 0x00000020 */
-#define DBGMCU_APB2_FZ_DBG_TIM22_STOP          DBGMCU_APB2_FZ_DBG_TIM22_STOP_Msk /*!< TIM22 counter stopped when core is halted */
-#define DBGMCU_APB2_FZ_DBG_TIM21_STOP_Pos      (2U)                            
-#define DBGMCU_APB2_FZ_DBG_TIM21_STOP_Msk      (0x1UL << DBGMCU_APB2_FZ_DBG_TIM21_STOP_Pos) /*!< 0x00000004 */
-#define DBGMCU_APB2_FZ_DBG_TIM21_STOP          DBGMCU_APB2_FZ_DBG_TIM21_STOP_Msk /*!< TIM21 counter stopped when core is halted */
-
-/******************************************************************************/
-/*                                                                            */
-/*                           DMA Controller (DMA)                             */
-/*                                                                            */
-/******************************************************************************/
-
-/*******************  Bit definition for DMA_ISR register  ********************/
-#define DMA_ISR_GIF1_Pos       (0U)           
-#define DMA_ISR_GIF1_Msk       (0x1UL << DMA_ISR_GIF1_Pos)                      /*!< 0x00000001 */
-#define DMA_ISR_GIF1           DMA_ISR_GIF1_Msk                                /*!< Channel 1 Global interrupt flag    */
-#define DMA_ISR_TCIF1_Pos      (1U)           
-#define DMA_ISR_TCIF1_Msk      (0x1UL << DMA_ISR_TCIF1_Pos)                     /*!< 0x00000002 */
-#define DMA_ISR_TCIF1          DMA_ISR_TCIF1_Msk                               /*!< Channel 1 Transfer Complete flag   */
-#define DMA_ISR_HTIF1_Pos      (2U)           
-#define DMA_ISR_HTIF1_Msk      (0x1UL << DMA_ISR_HTIF1_Pos)                     /*!< 0x00000004 */
-#define DMA_ISR_HTIF1          DMA_ISR_HTIF1_Msk                               /*!< Channel 1 Half Transfer flag       */
-#define DMA_ISR_TEIF1_Pos      (3U)           
-#define DMA_ISR_TEIF1_Msk      (0x1UL << DMA_ISR_TEIF1_Pos)                     /*!< 0x00000008 */
-#define DMA_ISR_TEIF1          DMA_ISR_TEIF1_Msk                               /*!< Channel 1 Transfer Error flag      */
-#define DMA_ISR_GIF2_Pos       (4U)           
-#define DMA_ISR_GIF2_Msk       (0x1UL << DMA_ISR_GIF2_Pos)                      /*!< 0x00000010 */
-#define DMA_ISR_GIF2           DMA_ISR_GIF2_Msk                                /*!< Channel 2 Global interrupt flag    */
-#define DMA_ISR_TCIF2_Pos      (5U)           
-#define DMA_ISR_TCIF2_Msk      (0x1UL << DMA_ISR_TCIF2_Pos)                     /*!< 0x00000020 */
-#define DMA_ISR_TCIF2          DMA_ISR_TCIF2_Msk                               /*!< Channel 2 Transfer Complete flag   */
-#define DMA_ISR_HTIF2_Pos      (6U)           
-#define DMA_ISR_HTIF2_Msk      (0x1UL << DMA_ISR_HTIF2_Pos)                     /*!< 0x00000040 */
-#define DMA_ISR_HTIF2          DMA_ISR_HTIF2_Msk                               /*!< Channel 2 Half Transfer flag       */
-#define DMA_ISR_TEIF2_Pos      (7U)           
-#define DMA_ISR_TEIF2_Msk      (0x1UL << DMA_ISR_TEIF2_Pos)                     /*!< 0x00000080 */
-#define DMA_ISR_TEIF2          DMA_ISR_TEIF2_Msk                               /*!< Channel 2 Transfer Error flag      */
-#define DMA_ISR_GIF3_Pos       (8U)           
-#define DMA_ISR_GIF3_Msk       (0x1UL << DMA_ISR_GIF3_Pos)                      /*!< 0x00000100 */
-#define DMA_ISR_GIF3           DMA_ISR_GIF3_Msk                                /*!< Channel 3 Global interrupt flag    */
-#define DMA_ISR_TCIF3_Pos      (9U)           
-#define DMA_ISR_TCIF3_Msk      (0x1UL << DMA_ISR_TCIF3_Pos)                     /*!< 0x00000200 */
-#define DMA_ISR_TCIF3          DMA_ISR_TCIF3_Msk                               /*!< Channel 3 Transfer Complete flag   */
-#define DMA_ISR_HTIF3_Pos      (10U)          
-#define DMA_ISR_HTIF3_Msk      (0x1UL << DMA_ISR_HTIF3_Pos)                     /*!< 0x00000400 */
-#define DMA_ISR_HTIF3          DMA_ISR_HTIF3_Msk                               /*!< Channel 3 Half Transfer flag       */
-#define DMA_ISR_TEIF3_Pos      (11U)          
-#define DMA_ISR_TEIF3_Msk      (0x1UL << DMA_ISR_TEIF3_Pos)                     /*!< 0x00000800 */
-#define DMA_ISR_TEIF3          DMA_ISR_TEIF3_Msk                               /*!< Channel 3 Transfer Error flag      */
-#define DMA_ISR_GIF4_Pos       (12U)          
-#define DMA_ISR_GIF4_Msk       (0x1UL << DMA_ISR_GIF4_Pos)                      /*!< 0x00001000 */
-#define DMA_ISR_GIF4           DMA_ISR_GIF4_Msk                                /*!< Channel 4 Global interrupt flag    */
-#define DMA_ISR_TCIF4_Pos      (13U)          
-#define DMA_ISR_TCIF4_Msk      (0x1UL << DMA_ISR_TCIF4_Pos)                     /*!< 0x00002000 */
-#define DMA_ISR_TCIF4          DMA_ISR_TCIF4_Msk                               /*!< Channel 4 Transfer Complete flag   */
-#define DMA_ISR_HTIF4_Pos      (14U)          
-#define DMA_ISR_HTIF4_Msk      (0x1UL << DMA_ISR_HTIF4_Pos)                     /*!< 0x00004000 */
-#define DMA_ISR_HTIF4          DMA_ISR_HTIF4_Msk                               /*!< Channel 4 Half Transfer flag       */
-#define DMA_ISR_TEIF4_Pos      (15U)          
-#define DMA_ISR_TEIF4_Msk      (0x1UL << DMA_ISR_TEIF4_Pos)                     /*!< 0x00008000 */
-#define DMA_ISR_TEIF4          DMA_ISR_TEIF4_Msk                               /*!< Channel 4 Transfer Error flag      */
-#define DMA_ISR_GIF5_Pos       (16U)          
-#define DMA_ISR_GIF5_Msk       (0x1UL << DMA_ISR_GIF5_Pos)                      /*!< 0x00010000 */
-#define DMA_ISR_GIF5           DMA_ISR_GIF5_Msk                                /*!< Channel 5 Global interrupt flag    */
-#define DMA_ISR_TCIF5_Pos      (17U)          
-#define DMA_ISR_TCIF5_Msk      (0x1UL << DMA_ISR_TCIF5_Pos)                     /*!< 0x00020000 */
-#define DMA_ISR_TCIF5          DMA_ISR_TCIF5_Msk                               /*!< Channel 5 Transfer Complete flag   */
-#define DMA_ISR_HTIF5_Pos      (18U)          
-#define DMA_ISR_HTIF5_Msk      (0x1UL << DMA_ISR_HTIF5_Pos)                     /*!< 0x00040000 */
-#define DMA_ISR_HTIF5          DMA_ISR_HTIF5_Msk                               /*!< Channel 5 Half Transfer flag       */
-#define DMA_ISR_TEIF5_Pos      (19U)          
-#define DMA_ISR_TEIF5_Msk      (0x1UL << DMA_ISR_TEIF5_Pos)                     /*!< 0x00080000 */
-#define DMA_ISR_TEIF5          DMA_ISR_TEIF5_Msk                               /*!< Channel 5 Transfer Error flag      */
-#define DMA_ISR_GIF6_Pos       (20U)          
-#define DMA_ISR_GIF6_Msk       (0x1UL << DMA_ISR_GIF6_Pos)                      /*!< 0x00100000 */
-#define DMA_ISR_GIF6           DMA_ISR_GIF6_Msk                                /*!< Channel 6 Global interrupt flag */
-#define DMA_ISR_TCIF6_Pos      (21U)          
-#define DMA_ISR_TCIF6_Msk      (0x1UL << DMA_ISR_TCIF6_Pos)                     /*!< 0x00200000 */
-#define DMA_ISR_TCIF6          DMA_ISR_TCIF6_Msk                               /*!< Channel 6 Transfer Complete flag */
-#define DMA_ISR_HTIF6_Pos      (22U)          
-#define DMA_ISR_HTIF6_Msk      (0x1UL << DMA_ISR_HTIF6_Pos)                     /*!< 0x00400000 */
-#define DMA_ISR_HTIF6          DMA_ISR_HTIF6_Msk                               /*!< Channel 6 Half Transfer flag */
-#define DMA_ISR_TEIF6_Pos      (23U)          
-#define DMA_ISR_TEIF6_Msk      (0x1UL << DMA_ISR_TEIF6_Pos)                     /*!< 0x00800000 */
-#define DMA_ISR_TEIF6          DMA_ISR_TEIF6_Msk                               /*!< Channel 6 Transfer Error flag */
-#define DMA_ISR_GIF7_Pos       (24U)          
-#define DMA_ISR_GIF7_Msk       (0x1UL << DMA_ISR_GIF7_Pos)                      /*!< 0x01000000 */
-#define DMA_ISR_GIF7           DMA_ISR_GIF7_Msk                                /*!< Channel 7 Global interrupt flag */
-#define DMA_ISR_TCIF7_Pos      (25U)          
-#define DMA_ISR_TCIF7_Msk      (0x1UL << DMA_ISR_TCIF7_Pos)                     /*!< 0x02000000 */
-#define DMA_ISR_TCIF7          DMA_ISR_TCIF7_Msk                               /*!< Channel 7 Transfer Complete flag */
-#define DMA_ISR_HTIF7_Pos      (26U)          
-#define DMA_ISR_HTIF7_Msk      (0x1UL << DMA_ISR_HTIF7_Pos)                     /*!< 0x04000000 */
-#define DMA_ISR_HTIF7          DMA_ISR_HTIF7_Msk                               /*!< Channel 7 Half Transfer flag */
-#define DMA_ISR_TEIF7_Pos      (27U)          
-#define DMA_ISR_TEIF7_Msk      (0x1UL << DMA_ISR_TEIF7_Pos)                     /*!< 0x08000000 */
-#define DMA_ISR_TEIF7          DMA_ISR_TEIF7_Msk                               /*!< Channel 7 Transfer Error flag */
-
-/*******************  Bit definition for DMA_IFCR register  *******************/
-#define DMA_IFCR_CGIF1_Pos     (0U)           
-#define DMA_IFCR_CGIF1_Msk     (0x1UL << DMA_IFCR_CGIF1_Pos)                    /*!< 0x00000001 */
-#define DMA_IFCR_CGIF1         DMA_IFCR_CGIF1_Msk                              /*!< Channel 1 Global interrupt clear    */
-#define DMA_IFCR_CTCIF1_Pos    (1U)           
-#define DMA_IFCR_CTCIF1_Msk    (0x1UL << DMA_IFCR_CTCIF1_Pos)                   /*!< 0x00000002 */
-#define DMA_IFCR_CTCIF1        DMA_IFCR_CTCIF1_Msk                             /*!< Channel 1 Transfer Complete clear   */
-#define DMA_IFCR_CHTIF1_Pos    (2U)           
-#define DMA_IFCR_CHTIF1_Msk    (0x1UL << DMA_IFCR_CHTIF1_Pos)                   /*!< 0x00000004 */
-#define DMA_IFCR_CHTIF1        DMA_IFCR_CHTIF1_Msk                             /*!< Channel 1 Half Transfer clear       */
-#define DMA_IFCR_CTEIF1_Pos    (3U)           
-#define DMA_IFCR_CTEIF1_Msk    (0x1UL << DMA_IFCR_CTEIF1_Pos)                   /*!< 0x00000008 */
-#define DMA_IFCR_CTEIF1        DMA_IFCR_CTEIF1_Msk                             /*!< Channel 1 Transfer Error clear      */
-#define DMA_IFCR_CGIF2_Pos     (4U)           
-#define DMA_IFCR_CGIF2_Msk     (0x1UL << DMA_IFCR_CGIF2_Pos)                    /*!< 0x00000010 */
-#define DMA_IFCR_CGIF2         DMA_IFCR_CGIF2_Msk                              /*!< Channel 2 Global interrupt clear    */
-#define DMA_IFCR_CTCIF2_Pos    (5U)           
-#define DMA_IFCR_CTCIF2_Msk    (0x1UL << DMA_IFCR_CTCIF2_Pos)                   /*!< 0x00000020 */
-#define DMA_IFCR_CTCIF2        DMA_IFCR_CTCIF2_Msk                             /*!< Channel 2 Transfer Complete clear   */
-#define DMA_IFCR_CHTIF2_Pos    (6U)           
-#define DMA_IFCR_CHTIF2_Msk    (0x1UL << DMA_IFCR_CHTIF2_Pos)                   /*!< 0x00000040 */
-#define DMA_IFCR_CHTIF2        DMA_IFCR_CHTIF2_Msk                             /*!< Channel 2 Half Transfer clear       */
-#define DMA_IFCR_CTEIF2_Pos    (7U)           
-#define DMA_IFCR_CTEIF2_Msk    (0x1UL << DMA_IFCR_CTEIF2_Pos)                   /*!< 0x00000080 */
-#define DMA_IFCR_CTEIF2        DMA_IFCR_CTEIF2_Msk                             /*!< Channel 2 Transfer Error clear      */
-#define DMA_IFCR_CGIF3_Pos     (8U)           
-#define DMA_IFCR_CGIF3_Msk     (0x1UL << DMA_IFCR_CGIF3_Pos)                    /*!< 0x00000100 */
-#define DMA_IFCR_CGIF3         DMA_IFCR_CGIF3_Msk                              /*!< Channel 3 Global interrupt clear    */
-#define DMA_IFCR_CTCIF3_Pos    (9U)           
-#define DMA_IFCR_CTCIF3_Msk    (0x1UL << DMA_IFCR_CTCIF3_Pos)                   /*!< 0x00000200 */
-#define DMA_IFCR_CTCIF3        DMA_IFCR_CTCIF3_Msk                             /*!< Channel 3 Transfer Complete clear   */
-#define DMA_IFCR_CHTIF3_Pos    (10U)          
-#define DMA_IFCR_CHTIF3_Msk    (0x1UL << DMA_IFCR_CHTIF3_Pos)                   /*!< 0x00000400 */
-#define DMA_IFCR_CHTIF3        DMA_IFCR_CHTIF3_Msk                             /*!< Channel 3 Half Transfer clear       */
-#define DMA_IFCR_CTEIF3_Pos    (11U)          
-#define DMA_IFCR_CTEIF3_Msk    (0x1UL << DMA_IFCR_CTEIF3_Pos)                   /*!< 0x00000800 */
-#define DMA_IFCR_CTEIF3        DMA_IFCR_CTEIF3_Msk                             /*!< Channel 3 Transfer Error clear      */
-#define DMA_IFCR_CGIF4_Pos     (12U)          
-#define DMA_IFCR_CGIF4_Msk     (0x1UL << DMA_IFCR_CGIF4_Pos)                    /*!< 0x00001000 */
-#define DMA_IFCR_CGIF4         DMA_IFCR_CGIF4_Msk                              /*!< Channel 4 Global interrupt clear    */
-#define DMA_IFCR_CTCIF4_Pos    (13U)          
-#define DMA_IFCR_CTCIF4_Msk    (0x1UL << DMA_IFCR_CTCIF4_Pos)                   /*!< 0x00002000 */
-#define DMA_IFCR_CTCIF4        DMA_IFCR_CTCIF4_Msk                             /*!< Channel 4 Transfer Complete clear   */
-#define DMA_IFCR_CHTIF4_Pos    (14U)          
-#define DMA_IFCR_CHTIF4_Msk    (0x1UL << DMA_IFCR_CHTIF4_Pos)                   /*!< 0x00004000 */
-#define DMA_IFCR_CHTIF4        DMA_IFCR_CHTIF4_Msk                             /*!< Channel 4 Half Transfer clear       */
-#define DMA_IFCR_CTEIF4_Pos    (15U)          
-#define DMA_IFCR_CTEIF4_Msk    (0x1UL << DMA_IFCR_CTEIF4_Pos)                   /*!< 0x00008000 */
-#define DMA_IFCR_CTEIF4        DMA_IFCR_CTEIF4_Msk                             /*!< Channel 4 Transfer Error clear      */
-#define DMA_IFCR_CGIF5_Pos     (16U)          
-#define DMA_IFCR_CGIF5_Msk     (0x1UL << DMA_IFCR_CGIF5_Pos)                    /*!< 0x00010000 */
-#define DMA_IFCR_CGIF5         DMA_IFCR_CGIF5_Msk                              /*!< Channel 5 Global interrupt clear    */
-#define DMA_IFCR_CTCIF5_Pos    (17U)          
-#define DMA_IFCR_CTCIF5_Msk    (0x1UL << DMA_IFCR_CTCIF5_Pos)                   /*!< 0x00020000 */
-#define DMA_IFCR_CTCIF5        DMA_IFCR_CTCIF5_Msk                             /*!< Channel 5 Transfer Complete clear   */
-#define DMA_IFCR_CHTIF5_Pos    (18U)          
-#define DMA_IFCR_CHTIF5_Msk    (0x1UL << DMA_IFCR_CHTIF5_Pos)                   /*!< 0x00040000 */
-#define DMA_IFCR_CHTIF5        DMA_IFCR_CHTIF5_Msk                             /*!< Channel 5 Half Transfer clear       */
-#define DMA_IFCR_CTEIF5_Pos    (19U)          
-#define DMA_IFCR_CTEIF5_Msk    (0x1UL << DMA_IFCR_CTEIF5_Pos)                   /*!< 0x00080000 */
-#define DMA_IFCR_CTEIF5        DMA_IFCR_CTEIF5_Msk                             /*!< Channel 5 Transfer Error clear      */
-#define DMA_IFCR_CGIF6_Pos     (20U)          
-#define DMA_IFCR_CGIF6_Msk     (0x1UL << DMA_IFCR_CGIF6_Pos)                    /*!< 0x00100000 */
-#define DMA_IFCR_CGIF6         DMA_IFCR_CGIF6_Msk                              /*!< Channel 6 Global interrupt clear */
-#define DMA_IFCR_CTCIF6_Pos    (21U)          
-#define DMA_IFCR_CTCIF6_Msk    (0x1UL << DMA_IFCR_CTCIF6_Pos)                   /*!< 0x00200000 */
-#define DMA_IFCR_CTCIF6        DMA_IFCR_CTCIF6_Msk                             /*!< Channel 6 Transfer Complete clear */
-#define DMA_IFCR_CHTIF6_Pos    (22U)          
-#define DMA_IFCR_CHTIF6_Msk    (0x1UL << DMA_IFCR_CHTIF6_Pos)                   /*!< 0x00400000 */
-#define DMA_IFCR_CHTIF6        DMA_IFCR_CHTIF6_Msk                             /*!< Channel 6 Half Transfer clear */
-#define DMA_IFCR_CTEIF6_Pos    (23U)          
-#define DMA_IFCR_CTEIF6_Msk    (0x1UL << DMA_IFCR_CTEIF6_Pos)                   /*!< 0x00800000 */
-#define DMA_IFCR_CTEIF6        DMA_IFCR_CTEIF6_Msk                             /*!< Channel 6 Transfer Error clear */
-#define DMA_IFCR_CGIF7_Pos     (24U)          
-#define DMA_IFCR_CGIF7_Msk     (0x1UL << DMA_IFCR_CGIF7_Pos)                    /*!< 0x01000000 */
-#define DMA_IFCR_CGIF7         DMA_IFCR_CGIF7_Msk                              /*!< Channel 7 Global interrupt clear */
-#define DMA_IFCR_CTCIF7_Pos    (25U)          
-#define DMA_IFCR_CTCIF7_Msk    (0x1UL << DMA_IFCR_CTCIF7_Pos)                   /*!< 0x02000000 */
-#define DMA_IFCR_CTCIF7        DMA_IFCR_CTCIF7_Msk                             /*!< Channel 7 Transfer Complete clear */
-#define DMA_IFCR_CHTIF7_Pos    (26U)          
-#define DMA_IFCR_CHTIF7_Msk    (0x1UL << DMA_IFCR_CHTIF7_Pos)                   /*!< 0x04000000 */
-#define DMA_IFCR_CHTIF7        DMA_IFCR_CHTIF7_Msk                             /*!< Channel 7 Half Transfer clear */
-#define DMA_IFCR_CTEIF7_Pos    (27U)          
-#define DMA_IFCR_CTEIF7_Msk    (0x1UL << DMA_IFCR_CTEIF7_Pos)                   /*!< 0x08000000 */
-#define DMA_IFCR_CTEIF7        DMA_IFCR_CTEIF7_Msk                             /*!< Channel 7 Transfer Error clear */
-
-/*******************  Bit definition for DMA_CCR register  ********************/
-#define DMA_CCR_EN_Pos         (0U)           
-#define DMA_CCR_EN_Msk         (0x1UL << DMA_CCR_EN_Pos)                        /*!< 0x00000001 */
-#define DMA_CCR_EN             DMA_CCR_EN_Msk                                  /*!< Channel enable                      */
-#define DMA_CCR_TCIE_Pos       (1U)           
-#define DMA_CCR_TCIE_Msk       (0x1UL << DMA_CCR_TCIE_Pos)                      /*!< 0x00000002 */
-#define DMA_CCR_TCIE           DMA_CCR_TCIE_Msk                                /*!< Transfer complete interrupt enable  */
-#define DMA_CCR_HTIE_Pos       (2U)           
-#define DMA_CCR_HTIE_Msk       (0x1UL << DMA_CCR_HTIE_Pos)                      /*!< 0x00000004 */
-#define DMA_CCR_HTIE           DMA_CCR_HTIE_Msk                                /*!< Half Transfer interrupt enable      */
-#define DMA_CCR_TEIE_Pos       (3U)           
-#define DMA_CCR_TEIE_Msk       (0x1UL << DMA_CCR_TEIE_Pos)                      /*!< 0x00000008 */
-#define DMA_CCR_TEIE           DMA_CCR_TEIE_Msk                                /*!< Transfer error interrupt enable     */
-#define DMA_CCR_DIR_Pos        (4U)           
-#define DMA_CCR_DIR_Msk        (0x1UL << DMA_CCR_DIR_Pos)                       /*!< 0x00000010 */
-#define DMA_CCR_DIR            DMA_CCR_DIR_Msk                                 /*!< Data transfer direction             */
-#define DMA_CCR_CIRC_Pos       (5U)           
-#define DMA_CCR_CIRC_Msk       (0x1UL << DMA_CCR_CIRC_Pos)                      /*!< 0x00000020 */
-#define DMA_CCR_CIRC           DMA_CCR_CIRC_Msk                                /*!< Circular mode                       */
-#define DMA_CCR_PINC_Pos       (6U)           
-#define DMA_CCR_PINC_Msk       (0x1UL << DMA_CCR_PINC_Pos)                      /*!< 0x00000040 */
-#define DMA_CCR_PINC           DMA_CCR_PINC_Msk                                /*!< Peripheral increment mode           */
-#define DMA_CCR_MINC_Pos       (7U)           
-#define DMA_CCR_MINC_Msk       (0x1UL << DMA_CCR_MINC_Pos)                      /*!< 0x00000080 */
-#define DMA_CCR_MINC           DMA_CCR_MINC_Msk                                /*!< Memory increment mode               */
-
-#define DMA_CCR_PSIZE_Pos      (8U)           
-#define DMA_CCR_PSIZE_Msk      (0x3UL << DMA_CCR_PSIZE_Pos)                     /*!< 0x00000300 */
-#define DMA_CCR_PSIZE          DMA_CCR_PSIZE_Msk                               /*!< PSIZE[1:0] bits (Peripheral size)   */
-#define DMA_CCR_PSIZE_0        (0x1UL << DMA_CCR_PSIZE_Pos)                     /*!< 0x00000100 */
-#define DMA_CCR_PSIZE_1        (0x2UL << DMA_CCR_PSIZE_Pos)                     /*!< 0x00000200 */
-
-#define DMA_CCR_MSIZE_Pos      (10U)          
-#define DMA_CCR_MSIZE_Msk      (0x3UL << DMA_CCR_MSIZE_Pos)                     /*!< 0x00000C00 */
-#define DMA_CCR_MSIZE          DMA_CCR_MSIZE_Msk                               /*!< MSIZE[1:0] bits (Memory size)       */
-#define DMA_CCR_MSIZE_0        (0x1UL << DMA_CCR_MSIZE_Pos)                     /*!< 0x00000400 */
-#define DMA_CCR_MSIZE_1        (0x2UL << DMA_CCR_MSIZE_Pos)                     /*!< 0x00000800 */
-
-#define DMA_CCR_PL_Pos         (12U)          
-#define DMA_CCR_PL_Msk         (0x3UL << DMA_CCR_PL_Pos)                        /*!< 0x00003000 */
-#define DMA_CCR_PL             DMA_CCR_PL_Msk                                  /*!< PL[1:0] bits(Channel Priority level)*/
-#define DMA_CCR_PL_0           (0x1UL << DMA_CCR_PL_Pos)                        /*!< 0x00001000 */
-#define DMA_CCR_PL_1           (0x2UL << DMA_CCR_PL_Pos)                        /*!< 0x00002000 */
-
-#define DMA_CCR_MEM2MEM_Pos    (14U)          
-#define DMA_CCR_MEM2MEM_Msk    (0x1UL << DMA_CCR_MEM2MEM_Pos)                   /*!< 0x00004000 */
-#define DMA_CCR_MEM2MEM        DMA_CCR_MEM2MEM_Msk                             /*!< Memory to memory mode               */
-
-/******************  Bit definition for DMA_CNDTR register  *******************/
-#define DMA_CNDTR_NDT_Pos      (0U)           
-#define DMA_CNDTR_NDT_Msk      (0xFFFFUL << DMA_CNDTR_NDT_Pos)                  /*!< 0x0000FFFF */
-#define DMA_CNDTR_NDT          DMA_CNDTR_NDT_Msk                               /*!< Number of data to Transfer          */
-
-/******************  Bit definition for DMA_CPAR register  ********************/
-#define DMA_CPAR_PA_Pos        (0U)           
-#define DMA_CPAR_PA_Msk        (0xFFFFFFFFUL << DMA_CPAR_PA_Pos)                /*!< 0xFFFFFFFF */
-#define DMA_CPAR_PA            DMA_CPAR_PA_Msk                                 /*!< Peripheral Address                  */
-
-/******************  Bit definition for DMA_CMAR register  ********************/
-#define DMA_CMAR_MA_Pos        (0U)           
-#define DMA_CMAR_MA_Msk        (0xFFFFFFFFUL << DMA_CMAR_MA_Pos)                /*!< 0xFFFFFFFF */
-#define DMA_CMAR_MA            DMA_CMAR_MA_Msk                                 /*!< Memory Address                      */
-
-
-/*******************  Bit definition for DMA_CSELR register  *******************/
-#define DMA_CSELR_C1S_Pos      (0U)           
-#define DMA_CSELR_C1S_Msk      (0xFUL << DMA_CSELR_C1S_Pos)                     /*!< 0x0000000F */
-#define DMA_CSELR_C1S          DMA_CSELR_C1S_Msk                               /*!< Channel 1 Selection */ 
-#define DMA_CSELR_C2S_Pos      (4U)           
-#define DMA_CSELR_C2S_Msk      (0xFUL << DMA_CSELR_C2S_Pos)                     /*!< 0x000000F0 */
-#define DMA_CSELR_C2S          DMA_CSELR_C2S_Msk                               /*!< Channel 2 Selection */ 
-#define DMA_CSELR_C3S_Pos      (8U)           
-#define DMA_CSELR_C3S_Msk      (0xFUL << DMA_CSELR_C3S_Pos)                     /*!< 0x00000F00 */
-#define DMA_CSELR_C3S          DMA_CSELR_C3S_Msk                               /*!< Channel 3 Selection */ 
-#define DMA_CSELR_C4S_Pos      (12U)          
-#define DMA_CSELR_C4S_Msk      (0xFUL << DMA_CSELR_C4S_Pos)                     /*!< 0x0000F000 */
-#define DMA_CSELR_C4S          DMA_CSELR_C4S_Msk                               /*!< Channel 4 Selection */ 
-#define DMA_CSELR_C5S_Pos      (16U)          
-#define DMA_CSELR_C5S_Msk      (0xFUL << DMA_CSELR_C5S_Pos)                     /*!< 0x000F0000 */
-#define DMA_CSELR_C5S          DMA_CSELR_C5S_Msk                               /*!< Channel 5 Selection */ 
-#define DMA_CSELR_C6S_Pos      (20U)          
-#define DMA_CSELR_C6S_Msk      (0xFUL << DMA_CSELR_C6S_Pos)                     /*!< 0x00F00000 */
-#define DMA_CSELR_C6S          DMA_CSELR_C6S_Msk                               /*!< Channel 6 Selection */ 
-#define DMA_CSELR_C7S_Pos      (24U)          
-#define DMA_CSELR_C7S_Msk      (0xFUL << DMA_CSELR_C7S_Pos)                     /*!< 0x0F000000 */
-#define DMA_CSELR_C7S          DMA_CSELR_C7S_Msk                               /*!< Channel 7 Selection */
-
-/******************************************************************************/
-/*                                                                            */
-/*                 External Interrupt/Event Controller (EXTI)                 */
-/*                                                                            */
-/******************************************************************************/
-
-/*******************  Bit definition for EXTI_IMR register  *******************/
-#define EXTI_IMR_IM0_Pos        (0U)          
-#define EXTI_IMR_IM0_Msk        (0x1UL << EXTI_IMR_IM0_Pos)                     /*!< 0x00000001 */
-#define EXTI_IMR_IM0            EXTI_IMR_IM0_Msk                               /*!< Interrupt Mask on line 0  */
-#define EXTI_IMR_IM1_Pos        (1U)          
-#define EXTI_IMR_IM1_Msk        (0x1UL << EXTI_IMR_IM1_Pos)                     /*!< 0x00000002 */
-#define EXTI_IMR_IM1            EXTI_IMR_IM1_Msk                               /*!< Interrupt Mask on line 1  */
-#define EXTI_IMR_IM2_Pos        (2U)          
-#define EXTI_IMR_IM2_Msk        (0x1UL << EXTI_IMR_IM2_Pos)                     /*!< 0x00000004 */
-#define EXTI_IMR_IM2            EXTI_IMR_IM2_Msk                               /*!< Interrupt Mask on line 2  */
-#define EXTI_IMR_IM3_Pos        (3U)          
-#define EXTI_IMR_IM3_Msk        (0x1UL << EXTI_IMR_IM3_Pos)                     /*!< 0x00000008 */
-#define EXTI_IMR_IM3            EXTI_IMR_IM3_Msk                               /*!< Interrupt Mask on line 3  */
-#define EXTI_IMR_IM4_Pos        (4U)          
-#define EXTI_IMR_IM4_Msk        (0x1UL << EXTI_IMR_IM4_Pos)                     /*!< 0x00000010 */
-#define EXTI_IMR_IM4            EXTI_IMR_IM4_Msk                               /*!< Interrupt Mask on line 4  */
-#define EXTI_IMR_IM5_Pos        (5U)          
-#define EXTI_IMR_IM5_Msk        (0x1UL << EXTI_IMR_IM5_Pos)                     /*!< 0x00000020 */
-#define EXTI_IMR_IM5            EXTI_IMR_IM5_Msk                               /*!< Interrupt Mask on line 5  */
-#define EXTI_IMR_IM6_Pos        (6U)          
-#define EXTI_IMR_IM6_Msk        (0x1UL << EXTI_IMR_IM6_Pos)                     /*!< 0x00000040 */
-#define EXTI_IMR_IM6            EXTI_IMR_IM6_Msk                               /*!< Interrupt Mask on line 6  */
-#define EXTI_IMR_IM7_Pos        (7U)          
-#define EXTI_IMR_IM7_Msk        (0x1UL << EXTI_IMR_IM7_Pos)                     /*!< 0x00000080 */
-#define EXTI_IMR_IM7            EXTI_IMR_IM7_Msk                               /*!< Interrupt Mask on line 7  */
-#define EXTI_IMR_IM8_Pos        (8U)          
-#define EXTI_IMR_IM8_Msk        (0x1UL << EXTI_IMR_IM8_Pos)                     /*!< 0x00000100 */
-#define EXTI_IMR_IM8            EXTI_IMR_IM8_Msk                               /*!< Interrupt Mask on line 8  */
-#define EXTI_IMR_IM9_Pos        (9U)          
-#define EXTI_IMR_IM9_Msk        (0x1UL << EXTI_IMR_IM9_Pos)                     /*!< 0x00000200 */
-#define EXTI_IMR_IM9            EXTI_IMR_IM9_Msk                               /*!< Interrupt Mask on line 9  */
-#define EXTI_IMR_IM10_Pos       (10U)         
-#define EXTI_IMR_IM10_Msk       (0x1UL << EXTI_IMR_IM10_Pos)                    /*!< 0x00000400 */
-#define EXTI_IMR_IM10           EXTI_IMR_IM10_Msk                              /*!< Interrupt Mask on line 10 */
-#define EXTI_IMR_IM11_Pos       (11U)         
-#define EXTI_IMR_IM11_Msk       (0x1UL << EXTI_IMR_IM11_Pos)                    /*!< 0x00000800 */
-#define EXTI_IMR_IM11           EXTI_IMR_IM11_Msk                              /*!< Interrupt Mask on line 11 */
-#define EXTI_IMR_IM12_Pos       (12U)         
-#define EXTI_IMR_IM12_Msk       (0x1UL << EXTI_IMR_IM12_Pos)                    /*!< 0x00001000 */
-#define EXTI_IMR_IM12           EXTI_IMR_IM12_Msk                              /*!< Interrupt Mask on line 12 */
-#define EXTI_IMR_IM13_Pos       (13U)         
-#define EXTI_IMR_IM13_Msk       (0x1UL << EXTI_IMR_IM13_Pos)                    /*!< 0x00002000 */
-#define EXTI_IMR_IM13           EXTI_IMR_IM13_Msk                              /*!< Interrupt Mask on line 13 */
-#define EXTI_IMR_IM14_Pos       (14U)         
-#define EXTI_IMR_IM14_Msk       (0x1UL << EXTI_IMR_IM14_Pos)                    /*!< 0x00004000 */
-#define EXTI_IMR_IM14           EXTI_IMR_IM14_Msk                              /*!< Interrupt Mask on line 14 */
-#define EXTI_IMR_IM15_Pos       (15U)         
-#define EXTI_IMR_IM15_Msk       (0x1UL << EXTI_IMR_IM15_Pos)                    /*!< 0x00008000 */
-#define EXTI_IMR_IM15           EXTI_IMR_IM15_Msk                              /*!< Interrupt Mask on line 15 */
-#define EXTI_IMR_IM16_Pos       (16U)         
-#define EXTI_IMR_IM16_Msk       (0x1UL << EXTI_IMR_IM16_Pos)                    /*!< 0x00010000 */
-#define EXTI_IMR_IM16           EXTI_IMR_IM16_Msk                              /*!< Interrupt Mask on line 16 */
-#define EXTI_IMR_IM17_Pos       (17U)         
-#define EXTI_IMR_IM17_Msk       (0x1UL << EXTI_IMR_IM17_Pos)                    /*!< 0x00020000 */
-#define EXTI_IMR_IM17           EXTI_IMR_IM17_Msk                              /*!< Interrupt Mask on line 17 */
-#define EXTI_IMR_IM18_Pos       (18U)         
-#define EXTI_IMR_IM18_Msk       (0x1UL << EXTI_IMR_IM18_Pos)                    /*!< 0x00040000 */
-#define EXTI_IMR_IM18           EXTI_IMR_IM18_Msk                              /*!< Interrupt Mask on line 18 */
-#define EXTI_IMR_IM19_Pos       (19U)         
-#define EXTI_IMR_IM19_Msk       (0x1UL << EXTI_IMR_IM19_Pos)                    /*!< 0x00080000 */
-#define EXTI_IMR_IM19           EXTI_IMR_IM19_Msk                              /*!< Interrupt Mask on line 19 */
-#define EXTI_IMR_IM20_Pos       (20U)         
-#define EXTI_IMR_IM20_Msk       (0x1UL << EXTI_IMR_IM20_Pos)                    /*!< 0x00100000 */
-#define EXTI_IMR_IM20           EXTI_IMR_IM20_Msk                              /*!< Interrupt Mask on line 20 */
-#define EXTI_IMR_IM21_Pos       (21U)         
-#define EXTI_IMR_IM21_Msk       (0x1UL << EXTI_IMR_IM21_Pos)                    /*!< 0x00200000 */
-#define EXTI_IMR_IM21           EXTI_IMR_IM21_Msk                              /*!< Interrupt Mask on line 21 */
-#define EXTI_IMR_IM22_Pos       (22U)         
-#define EXTI_IMR_IM22_Msk       (0x1UL << EXTI_IMR_IM22_Pos)                    /*!< 0x00400000 */
-#define EXTI_IMR_IM22           EXTI_IMR_IM22_Msk                              /*!< Interrupt Mask on line 22 */
-#define EXTI_IMR_IM23_Pos       (23U)         
-#define EXTI_IMR_IM23_Msk       (0x1UL << EXTI_IMR_IM23_Pos)                    /*!< 0x00800000 */
-#define EXTI_IMR_IM23           EXTI_IMR_IM23_Msk                              /*!< Interrupt Mask on line 23 */
-#define EXTI_IMR_IM25_Pos       (25U)         
-#define EXTI_IMR_IM25_Msk       (0x1UL << EXTI_IMR_IM25_Pos)                    /*!< 0x02000000 */
-#define EXTI_IMR_IM25           EXTI_IMR_IM25_Msk                              /*!< Interrupt Mask on line 25 */
-#define EXTI_IMR_IM26_Pos       (26U)         
-#define EXTI_IMR_IM26_Msk       (0x1UL << EXTI_IMR_IM26_Pos)                    /*!< 0x04000000 */
-#define EXTI_IMR_IM26           EXTI_IMR_IM26_Msk                              /*!< Interrupt Mask on line 26 */
-#define EXTI_IMR_IM28_Pos       (28U)         
-#define EXTI_IMR_IM28_Msk       (0x1UL << EXTI_IMR_IM28_Pos)                    /*!< 0x10000000 */
-#define EXTI_IMR_IM28           EXTI_IMR_IM28_Msk                              /*!< Interrupt Mask on line 28 */
-#define EXTI_IMR_IM29_Pos       (29U)         
-#define EXTI_IMR_IM29_Msk       (0x1UL << EXTI_IMR_IM29_Pos)                    /*!< 0x20000000 */
-#define EXTI_IMR_IM29           EXTI_IMR_IM29_Msk                              /*!< Interrupt Mask on line 29 */
-
-#define EXTI_IMR_IM_Pos         (0U)          
-#define EXTI_IMR_IM_Msk         (0x36FFFFFFUL << EXTI_IMR_IM_Pos)               /*!< 0x36FFFFFF */
-#define EXTI_IMR_IM             EXTI_IMR_IM_Msk                                /*!< Interrupt Mask All */
-
-/******************  Bit definition for EXTI_EMR register  ********************/
-#define EXTI_EMR_EM0_Pos        (0U)          
-#define EXTI_EMR_EM0_Msk        (0x1UL << EXTI_EMR_EM0_Pos)                     /*!< 0x00000001 */
-#define EXTI_EMR_EM0            EXTI_EMR_EM0_Msk                               /*!< Event Mask on line 0  */
-#define EXTI_EMR_EM1_Pos        (1U)          
-#define EXTI_EMR_EM1_Msk        (0x1UL << EXTI_EMR_EM1_Pos)                     /*!< 0x00000002 */
-#define EXTI_EMR_EM1            EXTI_EMR_EM1_Msk                               /*!< Event Mask on line 1  */
-#define EXTI_EMR_EM2_Pos        (2U)          
-#define EXTI_EMR_EM2_Msk        (0x1UL << EXTI_EMR_EM2_Pos)                     /*!< 0x00000004 */
-#define EXTI_EMR_EM2            EXTI_EMR_EM2_Msk                               /*!< Event Mask on line 2  */
-#define EXTI_EMR_EM3_Pos        (3U)          
-#define EXTI_EMR_EM3_Msk        (0x1UL << EXTI_EMR_EM3_Pos)                     /*!< 0x00000008 */
-#define EXTI_EMR_EM3            EXTI_EMR_EM3_Msk                               /*!< Event Mask on line 3  */
-#define EXTI_EMR_EM4_Pos        (4U)          
-#define EXTI_EMR_EM4_Msk        (0x1UL << EXTI_EMR_EM4_Pos)                     /*!< 0x00000010 */
-#define EXTI_EMR_EM4            EXTI_EMR_EM4_Msk                               /*!< Event Mask on line 4  */
-#define EXTI_EMR_EM5_Pos        (5U)          
-#define EXTI_EMR_EM5_Msk        (0x1UL << EXTI_EMR_EM5_Pos)                     /*!< 0x00000020 */
-#define EXTI_EMR_EM5            EXTI_EMR_EM5_Msk                               /*!< Event Mask on line 5  */
-#define EXTI_EMR_EM6_Pos        (6U)          
-#define EXTI_EMR_EM6_Msk        (0x1UL << EXTI_EMR_EM6_Pos)                     /*!< 0x00000040 */
-#define EXTI_EMR_EM6            EXTI_EMR_EM6_Msk                               /*!< Event Mask on line 6  */
-#define EXTI_EMR_EM7_Pos        (7U)          
-#define EXTI_EMR_EM7_Msk        (0x1UL << EXTI_EMR_EM7_Pos)                     /*!< 0x00000080 */
-#define EXTI_EMR_EM7            EXTI_EMR_EM7_Msk                               /*!< Event Mask on line 7  */
-#define EXTI_EMR_EM8_Pos        (8U)          
-#define EXTI_EMR_EM8_Msk        (0x1UL << EXTI_EMR_EM8_Pos)                     /*!< 0x00000100 */
-#define EXTI_EMR_EM8            EXTI_EMR_EM8_Msk                               /*!< Event Mask on line 8  */
-#define EXTI_EMR_EM9_Pos        (9U)          
-#define EXTI_EMR_EM9_Msk        (0x1UL << EXTI_EMR_EM9_Pos)                     /*!< 0x00000200 */
-#define EXTI_EMR_EM9            EXTI_EMR_EM9_Msk                               /*!< Event Mask on line 9  */
-#define EXTI_EMR_EM10_Pos       (10U)         
-#define EXTI_EMR_EM10_Msk       (0x1UL << EXTI_EMR_EM10_Pos)                    /*!< 0x00000400 */
-#define EXTI_EMR_EM10           EXTI_EMR_EM10_Msk                              /*!< Event Mask on line 10 */
-#define EXTI_EMR_EM11_Pos       (11U)         
-#define EXTI_EMR_EM11_Msk       (0x1UL << EXTI_EMR_EM11_Pos)                    /*!< 0x00000800 */
-#define EXTI_EMR_EM11           EXTI_EMR_EM11_Msk                              /*!< Event Mask on line 11 */
-#define EXTI_EMR_EM12_Pos       (12U)         
-#define EXTI_EMR_EM12_Msk       (0x1UL << EXTI_EMR_EM12_Pos)                    /*!< 0x00001000 */
-#define EXTI_EMR_EM12           EXTI_EMR_EM12_Msk                              /*!< Event Mask on line 12 */
-#define EXTI_EMR_EM13_Pos       (13U)         
-#define EXTI_EMR_EM13_Msk       (0x1UL << EXTI_EMR_EM13_Pos)                    /*!< 0x00002000 */
-#define EXTI_EMR_EM13           EXTI_EMR_EM13_Msk                              /*!< Event Mask on line 13 */
-#define EXTI_EMR_EM14_Pos       (14U)         
-#define EXTI_EMR_EM14_Msk       (0x1UL << EXTI_EMR_EM14_Pos)                    /*!< 0x00004000 */
-#define EXTI_EMR_EM14           EXTI_EMR_EM14_Msk                              /*!< Event Mask on line 14 */
-#define EXTI_EMR_EM15_Pos       (15U)         
-#define EXTI_EMR_EM15_Msk       (0x1UL << EXTI_EMR_EM15_Pos)                    /*!< 0x00008000 */
-#define EXTI_EMR_EM15           EXTI_EMR_EM15_Msk                              /*!< Event Mask on line 15 */
-#define EXTI_EMR_EM16_Pos       (16U)         
-#define EXTI_EMR_EM16_Msk       (0x1UL << EXTI_EMR_EM16_Pos)                    /*!< 0x00010000 */
-#define EXTI_EMR_EM16           EXTI_EMR_EM16_Msk                              /*!< Event Mask on line 16 */
-#define EXTI_EMR_EM17_Pos       (17U)         
-#define EXTI_EMR_EM17_Msk       (0x1UL << EXTI_EMR_EM17_Pos)                    /*!< 0x00020000 */
-#define EXTI_EMR_EM17           EXTI_EMR_EM17_Msk                              /*!< Event Mask on line 17 */
-#define EXTI_EMR_EM18_Pos       (18U)         
-#define EXTI_EMR_EM18_Msk       (0x1UL << EXTI_EMR_EM18_Pos)                    /*!< 0x00040000 */
-#define EXTI_EMR_EM18           EXTI_EMR_EM18_Msk                              /*!< Event Mask on line 18 */
-#define EXTI_EMR_EM19_Pos       (19U)         
-#define EXTI_EMR_EM19_Msk       (0x1UL << EXTI_EMR_EM19_Pos)                    /*!< 0x00080000 */
-#define EXTI_EMR_EM19           EXTI_EMR_EM19_Msk                              /*!< Event Mask on line 19 */
-#define EXTI_EMR_EM20_Pos       (20U)         
-#define EXTI_EMR_EM20_Msk       (0x1UL << EXTI_EMR_EM20_Pos)                    /*!< 0x00100000 */
-#define EXTI_EMR_EM20           EXTI_EMR_EM20_Msk                              /*!< Event Mask on line 20 */
-#define EXTI_EMR_EM21_Pos       (21U)         
-#define EXTI_EMR_EM21_Msk       (0x1UL << EXTI_EMR_EM21_Pos)                    /*!< 0x00200000 */
-#define EXTI_EMR_EM21           EXTI_EMR_EM21_Msk                              /*!< Event Mask on line 21 */
-#define EXTI_EMR_EM22_Pos       (22U)         
-#define EXTI_EMR_EM22_Msk       (0x1UL << EXTI_EMR_EM22_Pos)                    /*!< 0x00400000 */
-#define EXTI_EMR_EM22           EXTI_EMR_EM22_Msk                              /*!< Event Mask on line 22 */
-#define EXTI_EMR_EM23_Pos       (23U)         
-#define EXTI_EMR_EM23_Msk       (0x1UL << EXTI_EMR_EM23_Pos)                    /*!< 0x00800000 */
-#define EXTI_EMR_EM23           EXTI_EMR_EM23_Msk                              /*!< Event Mask on line 23 */
-#define EXTI_EMR_EM25_Pos       (25U)         
-#define EXTI_EMR_EM25_Msk       (0x1UL << EXTI_EMR_EM25_Pos)                    /*!< 0x02000000 */
-#define EXTI_EMR_EM25           EXTI_EMR_EM25_Msk                              /*!< Event Mask on line 25 */
-#define EXTI_EMR_EM26_Pos       (26U)         
-#define EXTI_EMR_EM26_Msk       (0x1UL << EXTI_EMR_EM26_Pos)                    /*!< 0x04000000 */
-#define EXTI_EMR_EM26           EXTI_EMR_EM26_Msk                              /*!< Event Mask on line 26 */
-#define EXTI_EMR_EM28_Pos       (28U)         
-#define EXTI_EMR_EM28_Msk       (0x1UL << EXTI_EMR_EM28_Pos)                    /*!< 0x10000000 */
-#define EXTI_EMR_EM28           EXTI_EMR_EM28_Msk                              /*!< Event Mask on line 28 */
-#define EXTI_EMR_EM29_Pos       (29U)         
-#define EXTI_EMR_EM29_Msk       (0x1UL << EXTI_EMR_EM29_Pos)                    /*!< 0x20000000 */
-#define EXTI_EMR_EM29           EXTI_EMR_EM29_Msk                              /*!< Event Mask on line 29 */
-
-/*******************  Bit definition for EXTI_RTSR register  ******************/
-#define EXTI_RTSR_RT0_Pos       (0U)          
-#define EXTI_RTSR_RT0_Msk       (0x1UL << EXTI_RTSR_RT0_Pos)                    /*!< 0x00000001 */
-#define EXTI_RTSR_RT0           EXTI_RTSR_RT0_Msk                              /*!< Rising trigger event configuration bit of line 0 */
-#define EXTI_RTSR_RT1_Pos       (1U)          
-#define EXTI_RTSR_RT1_Msk       (0x1UL << EXTI_RTSR_RT1_Pos)                    /*!< 0x00000002 */
-#define EXTI_RTSR_RT1           EXTI_RTSR_RT1_Msk                              /*!< Rising trigger event configuration bit of line 1 */
-#define EXTI_RTSR_RT2_Pos       (2U)          
-#define EXTI_RTSR_RT2_Msk       (0x1UL << EXTI_RTSR_RT2_Pos)                    /*!< 0x00000004 */
-#define EXTI_RTSR_RT2           EXTI_RTSR_RT2_Msk                              /*!< Rising trigger event configuration bit of line 2 */
-#define EXTI_RTSR_RT3_Pos       (3U)          
-#define EXTI_RTSR_RT3_Msk       (0x1UL << EXTI_RTSR_RT3_Pos)                    /*!< 0x00000008 */
-#define EXTI_RTSR_RT3           EXTI_RTSR_RT3_Msk                              /*!< Rising trigger event configuration bit of line 3 */
-#define EXTI_RTSR_RT4_Pos       (4U)          
-#define EXTI_RTSR_RT4_Msk       (0x1UL << EXTI_RTSR_RT4_Pos)                    /*!< 0x00000010 */
-#define EXTI_RTSR_RT4           EXTI_RTSR_RT4_Msk                              /*!< Rising trigger event configuration bit of line 4 */
-#define EXTI_RTSR_RT5_Pos       (5U)          
-#define EXTI_RTSR_RT5_Msk       (0x1UL << EXTI_RTSR_RT5_Pos)                    /*!< 0x00000020 */
-#define EXTI_RTSR_RT5           EXTI_RTSR_RT5_Msk                              /*!< Rising trigger event configuration bit of line 5 */
-#define EXTI_RTSR_RT6_Pos       (6U)          
-#define EXTI_RTSR_RT6_Msk       (0x1UL << EXTI_RTSR_RT6_Pos)                    /*!< 0x00000040 */
-#define EXTI_RTSR_RT6           EXTI_RTSR_RT6_Msk                              /*!< Rising trigger event configuration bit of line 6 */
-#define EXTI_RTSR_RT7_Pos       (7U)          
-#define EXTI_RTSR_RT7_Msk       (0x1UL << EXTI_RTSR_RT7_Pos)                    /*!< 0x00000080 */
-#define EXTI_RTSR_RT7           EXTI_RTSR_RT7_Msk                              /*!< Rising trigger event configuration bit of line 7 */
-#define EXTI_RTSR_RT8_Pos       (8U)          
-#define EXTI_RTSR_RT8_Msk       (0x1UL << EXTI_RTSR_RT8_Pos)                    /*!< 0x00000100 */
-#define EXTI_RTSR_RT8           EXTI_RTSR_RT8_Msk                              /*!< Rising trigger event configuration bit of line 8 */
-#define EXTI_RTSR_RT9_Pos       (9U)          
-#define EXTI_RTSR_RT9_Msk       (0x1UL << EXTI_RTSR_RT9_Pos)                    /*!< 0x00000200 */
-#define EXTI_RTSR_RT9           EXTI_RTSR_RT9_Msk                              /*!< Rising trigger event configuration bit of line 9 */
-#define EXTI_RTSR_RT10_Pos      (10U)         
-#define EXTI_RTSR_RT10_Msk      (0x1UL << EXTI_RTSR_RT10_Pos)                   /*!< 0x00000400 */
-#define EXTI_RTSR_RT10          EXTI_RTSR_RT10_Msk                             /*!< Rising trigger event configuration bit of line 10 */
-#define EXTI_RTSR_RT11_Pos      (11U)         
-#define EXTI_RTSR_RT11_Msk      (0x1UL << EXTI_RTSR_RT11_Pos)                   /*!< 0x00000800 */
-#define EXTI_RTSR_RT11          EXTI_RTSR_RT11_Msk                             /*!< Rising trigger event configuration bit of line 11 */
-#define EXTI_RTSR_RT12_Pos      (12U)         
-#define EXTI_RTSR_RT12_Msk      (0x1UL << EXTI_RTSR_RT12_Pos)                   /*!< 0x00001000 */
-#define EXTI_RTSR_RT12          EXTI_RTSR_RT12_Msk                             /*!< Rising trigger event configuration bit of line 12 */
-#define EXTI_RTSR_RT13_Pos      (13U)         
-#define EXTI_RTSR_RT13_Msk      (0x1UL << EXTI_RTSR_RT13_Pos)                   /*!< 0x00002000 */
-#define EXTI_RTSR_RT13          EXTI_RTSR_RT13_Msk                             /*!< Rising trigger event configuration bit of line 13 */
-#define EXTI_RTSR_RT14_Pos      (14U)         
-#define EXTI_RTSR_RT14_Msk      (0x1UL << EXTI_RTSR_RT14_Pos)                   /*!< 0x00004000 */
-#define EXTI_RTSR_RT14          EXTI_RTSR_RT14_Msk                             /*!< Rising trigger event configuration bit of line 14 */
-#define EXTI_RTSR_RT15_Pos      (15U)         
-#define EXTI_RTSR_RT15_Msk      (0x1UL << EXTI_RTSR_RT15_Pos)                   /*!< 0x00008000 */
-#define EXTI_RTSR_RT15          EXTI_RTSR_RT15_Msk                             /*!< Rising trigger event configuration bit of line 15 */
-#define EXTI_RTSR_RT16_Pos      (16U)         
-#define EXTI_RTSR_RT16_Msk      (0x1UL << EXTI_RTSR_RT16_Pos)                   /*!< 0x00010000 */
-#define EXTI_RTSR_RT16          EXTI_RTSR_RT16_Msk                             /*!< Rising trigger event configuration bit of line 16 */
-#define EXTI_RTSR_RT17_Pos      (17U)         
-#define EXTI_RTSR_RT17_Msk      (0x1UL << EXTI_RTSR_RT17_Pos)                   /*!< 0x00020000 */
-#define EXTI_RTSR_RT17          EXTI_RTSR_RT17_Msk                             /*!< Rising trigger event configuration bit of line 17 */
-#define EXTI_RTSR_RT19_Pos      (19U)         
-#define EXTI_RTSR_RT19_Msk      (0x1UL << EXTI_RTSR_RT19_Pos)                   /*!< 0x00080000 */
-#define EXTI_RTSR_RT19          EXTI_RTSR_RT19_Msk                             /*!< Rising trigger event configuration bit of line 19 */
-#define EXTI_RTSR_RT20_Pos      (20U)         
-#define EXTI_RTSR_RT20_Msk      (0x1UL << EXTI_RTSR_RT20_Pos)                   /*!< 0x00100000 */
-#define EXTI_RTSR_RT20          EXTI_RTSR_RT20_Msk                             /*!< Rising trigger event configuration bit of line 20 */
-#define EXTI_RTSR_RT21_Pos      (21U)         
-#define EXTI_RTSR_RT21_Msk      (0x1UL << EXTI_RTSR_RT21_Pos)                   /*!< 0x00200000 */
-#define EXTI_RTSR_RT21          EXTI_RTSR_RT21_Msk                             /*!< Rising trigger event configuration bit of line 21 */
-#define EXTI_RTSR_RT22_Pos      (22U)         
-#define EXTI_RTSR_RT22_Msk      (0x1UL << EXTI_RTSR_RT22_Pos)                   /*!< 0x00400000 */
-#define EXTI_RTSR_RT22          EXTI_RTSR_RT22_Msk                             /*!< Rising trigger event configuration bit of line 22 */
-
-/* Legacy defines */
-#define EXTI_RTSR_TR0                       EXTI_RTSR_RT0
-#define EXTI_RTSR_TR1                       EXTI_RTSR_RT1
-#define EXTI_RTSR_TR2                       EXTI_RTSR_RT2
-#define EXTI_RTSR_TR3                       EXTI_RTSR_RT3
-#define EXTI_RTSR_TR4                       EXTI_RTSR_RT4
-#define EXTI_RTSR_TR5                       EXTI_RTSR_RT5
-#define EXTI_RTSR_TR6                       EXTI_RTSR_RT6
-#define EXTI_RTSR_TR7                       EXTI_RTSR_RT7
-#define EXTI_RTSR_TR8                       EXTI_RTSR_RT8
-#define EXTI_RTSR_TR9                       EXTI_RTSR_RT9
-#define EXTI_RTSR_TR10                      EXTI_RTSR_RT10
-#define EXTI_RTSR_TR11                      EXTI_RTSR_RT11
-#define EXTI_RTSR_TR12                      EXTI_RTSR_RT12
-#define EXTI_RTSR_TR13                      EXTI_RTSR_RT13
-#define EXTI_RTSR_TR14                      EXTI_RTSR_RT14
-#define EXTI_RTSR_TR15                      EXTI_RTSR_RT15
-#define EXTI_RTSR_TR16                      EXTI_RTSR_RT16
-#define EXTI_RTSR_TR17                      EXTI_RTSR_RT17
-#define EXTI_RTSR_TR19                      EXTI_RTSR_RT19
-#define EXTI_RTSR_TR20                      EXTI_RTSR_RT20
-#define EXTI_RTSR_TR21                      EXTI_RTSR_RT21
-#define EXTI_RTSR_TR22                      EXTI_RTSR_RT22
-
-/*******************  Bit definition for EXTI_FTSR register *******************/
-#define EXTI_FTSR_FT0_Pos       (0U)          
-#define EXTI_FTSR_FT0_Msk       (0x1UL << EXTI_FTSR_FT0_Pos)                    /*!< 0x00000001 */
-#define EXTI_FTSR_FT0           EXTI_FTSR_FT0_Msk                              /*!< Falling trigger event configuration bit of line 0 */
-#define EXTI_FTSR_FT1_Pos       (1U)          
-#define EXTI_FTSR_FT1_Msk       (0x1UL << EXTI_FTSR_FT1_Pos)                    /*!< 0x00000002 */
-#define EXTI_FTSR_FT1           EXTI_FTSR_FT1_Msk                              /*!< Falling trigger event configuration bit of line 1 */
-#define EXTI_FTSR_FT2_Pos       (2U)          
-#define EXTI_FTSR_FT2_Msk       (0x1UL << EXTI_FTSR_FT2_Pos)                    /*!< 0x00000004 */
-#define EXTI_FTSR_FT2           EXTI_FTSR_FT2_Msk                              /*!< Falling trigger event configuration bit of line 2 */
-#define EXTI_FTSR_FT3_Pos       (3U)          
-#define EXTI_FTSR_FT3_Msk       (0x1UL << EXTI_FTSR_FT3_Pos)                    /*!< 0x00000008 */
-#define EXTI_FTSR_FT3           EXTI_FTSR_FT3_Msk                              /*!< Falling trigger event configuration bit of line 3 */
-#define EXTI_FTSR_FT4_Pos       (4U)          
-#define EXTI_FTSR_FT4_Msk       (0x1UL << EXTI_FTSR_FT4_Pos)                    /*!< 0x00000010 */
-#define EXTI_FTSR_FT4           EXTI_FTSR_FT4_Msk                              /*!< Falling trigger event configuration bit of line 4 */
-#define EXTI_FTSR_FT5_Pos       (5U)          
-#define EXTI_FTSR_FT5_Msk       (0x1UL << EXTI_FTSR_FT5_Pos)                    /*!< 0x00000020 */
-#define EXTI_FTSR_FT5           EXTI_FTSR_FT5_Msk                              /*!< Falling trigger event configuration bit of line 5 */
-#define EXTI_FTSR_FT6_Pos       (6U)          
-#define EXTI_FTSR_FT6_Msk       (0x1UL << EXTI_FTSR_FT6_Pos)                    /*!< 0x00000040 */
-#define EXTI_FTSR_FT6           EXTI_FTSR_FT6_Msk                              /*!< Falling trigger event configuration bit of line 6 */
-#define EXTI_FTSR_FT7_Pos       (7U)          
-#define EXTI_FTSR_FT7_Msk       (0x1UL << EXTI_FTSR_FT7_Pos)                    /*!< 0x00000080 */
-#define EXTI_FTSR_FT7           EXTI_FTSR_FT7_Msk                              /*!< Falling trigger event configuration bit of line 7 */
-#define EXTI_FTSR_FT8_Pos       (8U)          
-#define EXTI_FTSR_FT8_Msk       (0x1UL << EXTI_FTSR_FT8_Pos)                    /*!< 0x00000100 */
-#define EXTI_FTSR_FT8           EXTI_FTSR_FT8_Msk                              /*!< Falling trigger event configuration bit of line 8 */
-#define EXTI_FTSR_FT9_Pos       (9U)          
-#define EXTI_FTSR_FT9_Msk       (0x1UL << EXTI_FTSR_FT9_Pos)                    /*!< 0x00000200 */
-#define EXTI_FTSR_FT9           EXTI_FTSR_FT9_Msk                              /*!< Falling trigger event configuration bit of line 9 */
-#define EXTI_FTSR_FT10_Pos      (10U)         
-#define EXTI_FTSR_FT10_Msk      (0x1UL << EXTI_FTSR_FT10_Pos)                   /*!< 0x00000400 */
-#define EXTI_FTSR_FT10          EXTI_FTSR_FT10_Msk                             /*!< Falling trigger event configuration bit of line 10 */
-#define EXTI_FTSR_FT11_Pos      (11U)         
-#define EXTI_FTSR_FT11_Msk      (0x1UL << EXTI_FTSR_FT11_Pos)                   /*!< 0x00000800 */
-#define EXTI_FTSR_FT11          EXTI_FTSR_FT11_Msk                             /*!< Falling trigger event configuration bit of line 11 */
-#define EXTI_FTSR_FT12_Pos      (12U)         
-#define EXTI_FTSR_FT12_Msk      (0x1UL << EXTI_FTSR_FT12_Pos)                   /*!< 0x00001000 */
-#define EXTI_FTSR_FT12          EXTI_FTSR_FT12_Msk                             /*!< Falling trigger event configuration bit of line 12 */
-#define EXTI_FTSR_FT13_Pos      (13U)         
-#define EXTI_FTSR_FT13_Msk      (0x1UL << EXTI_FTSR_FT13_Pos)                   /*!< 0x00002000 */
-#define EXTI_FTSR_FT13          EXTI_FTSR_FT13_Msk                             /*!< Falling trigger event configuration bit of line 13 */
-#define EXTI_FTSR_FT14_Pos      (14U)         
-#define EXTI_FTSR_FT14_Msk      (0x1UL << EXTI_FTSR_FT14_Pos)                   /*!< 0x00004000 */
-#define EXTI_FTSR_FT14          EXTI_FTSR_FT14_Msk                             /*!< Falling trigger event configuration bit of line 14 */
-#define EXTI_FTSR_FT15_Pos      (15U)         
-#define EXTI_FTSR_FT15_Msk      (0x1UL << EXTI_FTSR_FT15_Pos)                   /*!< 0x00008000 */
-#define EXTI_FTSR_FT15          EXTI_FTSR_FT15_Msk                             /*!< Falling trigger event configuration bit of line 15 */
-#define EXTI_FTSR_FT16_Pos      (16U)         
-#define EXTI_FTSR_FT16_Msk      (0x1UL << EXTI_FTSR_FT16_Pos)                   /*!< 0x00010000 */
-#define EXTI_FTSR_FT16          EXTI_FTSR_FT16_Msk                             /*!< Falling trigger event configuration bit of line 16 */
-#define EXTI_FTSR_FT17_Pos      (17U)         
-#define EXTI_FTSR_FT17_Msk      (0x1UL << EXTI_FTSR_FT17_Pos)                   /*!< 0x00020000 */
-#define EXTI_FTSR_FT17          EXTI_FTSR_FT17_Msk                             /*!< Falling trigger event configuration bit of line 17 */
-#define EXTI_FTSR_FT19_Pos      (19U)         
-#define EXTI_FTSR_FT19_Msk      (0x1UL << EXTI_FTSR_FT19_Pos)                   /*!< 0x00080000 */
-#define EXTI_FTSR_FT19          EXTI_FTSR_FT19_Msk                             /*!< Falling trigger event configuration bit of line 19 */
-#define EXTI_FTSR_FT20_Pos      (20U)         
-#define EXTI_FTSR_FT20_Msk      (0x1UL << EXTI_FTSR_FT20_Pos)                   /*!< 0x00100000 */
-#define EXTI_FTSR_FT20          EXTI_FTSR_FT20_Msk                             /*!< Falling trigger event configuration bit of line 20 */
-#define EXTI_FTSR_FT21_Pos      (21U)         
-#define EXTI_FTSR_FT21_Msk      (0x1UL << EXTI_FTSR_FT21_Pos)                   /*!< 0x00200000 */
-#define EXTI_FTSR_FT21          EXTI_FTSR_FT21_Msk                             /*!< Falling trigger event configuration bit of line 21 */
-#define EXTI_FTSR_FT22_Pos      (22U)         
-#define EXTI_FTSR_FT22_Msk      (0x1UL << EXTI_FTSR_FT22_Pos)                   /*!< 0x00400000 */
-#define EXTI_FTSR_FT22          EXTI_FTSR_FT22_Msk                             /*!< Falling trigger event configuration bit of line 22 */
-
-/* Legacy defines */
-#define EXTI_FTSR_TR0                       EXTI_FTSR_FT0
-#define EXTI_FTSR_TR1                       EXTI_FTSR_FT1
-#define EXTI_FTSR_TR2                       EXTI_FTSR_FT2
-#define EXTI_FTSR_TR3                       EXTI_FTSR_FT3
-#define EXTI_FTSR_TR4                       EXTI_FTSR_FT4
-#define EXTI_FTSR_TR5                       EXTI_FTSR_FT5
-#define EXTI_FTSR_TR6                       EXTI_FTSR_FT6
-#define EXTI_FTSR_TR7                       EXTI_FTSR_FT7
-#define EXTI_FTSR_TR8                       EXTI_FTSR_FT8
-#define EXTI_FTSR_TR9                       EXTI_FTSR_FT9
-#define EXTI_FTSR_TR10                      EXTI_FTSR_FT10
-#define EXTI_FTSR_TR11                      EXTI_FTSR_FT11
-#define EXTI_FTSR_TR12                      EXTI_FTSR_FT12
-#define EXTI_FTSR_TR13                      EXTI_FTSR_FT13
-#define EXTI_FTSR_TR14                      EXTI_FTSR_FT14
-#define EXTI_FTSR_TR15                      EXTI_FTSR_FT15
-#define EXTI_FTSR_TR16                      EXTI_FTSR_FT16
-#define EXTI_FTSR_TR17                      EXTI_FTSR_FT17
-#define EXTI_FTSR_TR19                      EXTI_FTSR_FT19
-#define EXTI_FTSR_TR20                      EXTI_FTSR_FT20
-#define EXTI_FTSR_TR21                      EXTI_FTSR_FT21
-#define EXTI_FTSR_TR22                      EXTI_FTSR_FT22
-
-/******************* Bit definition for EXTI_SWIER register *******************/
-#define EXTI_SWIER_SWI0_Pos     (0U)          
-#define EXTI_SWIER_SWI0_Msk     (0x1UL << EXTI_SWIER_SWI0_Pos)                  /*!< 0x00000001 */
-#define EXTI_SWIER_SWI0         EXTI_SWIER_SWI0_Msk                            /*!< Software Interrupt on line 0  */
-#define EXTI_SWIER_SWI1_Pos     (1U)          
-#define EXTI_SWIER_SWI1_Msk     (0x1UL << EXTI_SWIER_SWI1_Pos)                  /*!< 0x00000002 */
-#define EXTI_SWIER_SWI1         EXTI_SWIER_SWI1_Msk                            /*!< Software Interrupt on line 1  */
-#define EXTI_SWIER_SWI2_Pos     (2U)          
-#define EXTI_SWIER_SWI2_Msk     (0x1UL << EXTI_SWIER_SWI2_Pos)                  /*!< 0x00000004 */
-#define EXTI_SWIER_SWI2         EXTI_SWIER_SWI2_Msk                            /*!< Software Interrupt on line 2  */
-#define EXTI_SWIER_SWI3_Pos     (3U)          
-#define EXTI_SWIER_SWI3_Msk     (0x1UL << EXTI_SWIER_SWI3_Pos)                  /*!< 0x00000008 */
-#define EXTI_SWIER_SWI3         EXTI_SWIER_SWI3_Msk                            /*!< Software Interrupt on line 3  */
-#define EXTI_SWIER_SWI4_Pos     (4U)          
-#define EXTI_SWIER_SWI4_Msk     (0x1UL << EXTI_SWIER_SWI4_Pos)                  /*!< 0x00000010 */
-#define EXTI_SWIER_SWI4         EXTI_SWIER_SWI4_Msk                            /*!< Software Interrupt on line 4  */
-#define EXTI_SWIER_SWI5_Pos     (5U)          
-#define EXTI_SWIER_SWI5_Msk     (0x1UL << EXTI_SWIER_SWI5_Pos)                  /*!< 0x00000020 */
-#define EXTI_SWIER_SWI5         EXTI_SWIER_SWI5_Msk                            /*!< Software Interrupt on line 5  */
-#define EXTI_SWIER_SWI6_Pos     (6U)          
-#define EXTI_SWIER_SWI6_Msk     (0x1UL << EXTI_SWIER_SWI6_Pos)                  /*!< 0x00000040 */
-#define EXTI_SWIER_SWI6         EXTI_SWIER_SWI6_Msk                            /*!< Software Interrupt on line 6  */
-#define EXTI_SWIER_SWI7_Pos     (7U)          
-#define EXTI_SWIER_SWI7_Msk     (0x1UL << EXTI_SWIER_SWI7_Pos)                  /*!< 0x00000080 */
-#define EXTI_SWIER_SWI7         EXTI_SWIER_SWI7_Msk                            /*!< Software Interrupt on line 7  */
-#define EXTI_SWIER_SWI8_Pos     (8U)          
-#define EXTI_SWIER_SWI8_Msk     (0x1UL << EXTI_SWIER_SWI8_Pos)                  /*!< 0x00000100 */
-#define EXTI_SWIER_SWI8         EXTI_SWIER_SWI8_Msk                            /*!< Software Interrupt on line 8  */
-#define EXTI_SWIER_SWI9_Pos     (9U)          
-#define EXTI_SWIER_SWI9_Msk     (0x1UL << EXTI_SWIER_SWI9_Pos)                  /*!< 0x00000200 */
-#define EXTI_SWIER_SWI9         EXTI_SWIER_SWI9_Msk                            /*!< Software Interrupt on line 9  */
-#define EXTI_SWIER_SWI10_Pos    (10U)         
-#define EXTI_SWIER_SWI10_Msk    (0x1UL << EXTI_SWIER_SWI10_Pos)                 /*!< 0x00000400 */
-#define EXTI_SWIER_SWI10        EXTI_SWIER_SWI10_Msk                           /*!< Software Interrupt on line 10 */
-#define EXTI_SWIER_SWI11_Pos    (11U)         
-#define EXTI_SWIER_SWI11_Msk    (0x1UL << EXTI_SWIER_SWI11_Pos)                 /*!< 0x00000800 */
-#define EXTI_SWIER_SWI11        EXTI_SWIER_SWI11_Msk                           /*!< Software Interrupt on line 11 */
-#define EXTI_SWIER_SWI12_Pos    (12U)         
-#define EXTI_SWIER_SWI12_Msk    (0x1UL << EXTI_SWIER_SWI12_Pos)                 /*!< 0x00001000 */
-#define EXTI_SWIER_SWI12        EXTI_SWIER_SWI12_Msk                           /*!< Software Interrupt on line 12 */
-#define EXTI_SWIER_SWI13_Pos    (13U)         
-#define EXTI_SWIER_SWI13_Msk    (0x1UL << EXTI_SWIER_SWI13_Pos)                 /*!< 0x00002000 */
-#define EXTI_SWIER_SWI13        EXTI_SWIER_SWI13_Msk                           /*!< Software Interrupt on line 13 */
-#define EXTI_SWIER_SWI14_Pos    (14U)         
-#define EXTI_SWIER_SWI14_Msk    (0x1UL << EXTI_SWIER_SWI14_Pos)                 /*!< 0x00004000 */
-#define EXTI_SWIER_SWI14        EXTI_SWIER_SWI14_Msk                           /*!< Software Interrupt on line 14 */
-#define EXTI_SWIER_SWI15_Pos    (15U)         
-#define EXTI_SWIER_SWI15_Msk    (0x1UL << EXTI_SWIER_SWI15_Pos)                 /*!< 0x00008000 */
-#define EXTI_SWIER_SWI15        EXTI_SWIER_SWI15_Msk                           /*!< Software Interrupt on line 15 */
-#define EXTI_SWIER_SWI16_Pos    (16U)         
-#define EXTI_SWIER_SWI16_Msk    (0x1UL << EXTI_SWIER_SWI16_Pos)                 /*!< 0x00010000 */
-#define EXTI_SWIER_SWI16        EXTI_SWIER_SWI16_Msk                           /*!< Software Interrupt on line 16 */
-#define EXTI_SWIER_SWI17_Pos    (17U)         
-#define EXTI_SWIER_SWI17_Msk    (0x1UL << EXTI_SWIER_SWI17_Pos)                 /*!< 0x00020000 */
-#define EXTI_SWIER_SWI17        EXTI_SWIER_SWI17_Msk                           /*!< Software Interrupt on line 17 */
-#define EXTI_SWIER_SWI19_Pos    (19U)         
-#define EXTI_SWIER_SWI19_Msk    (0x1UL << EXTI_SWIER_SWI19_Pos)                 /*!< 0x00080000 */
-#define EXTI_SWIER_SWI19        EXTI_SWIER_SWI19_Msk                           /*!< Software Interrupt on line 19 */
-#define EXTI_SWIER_SWI20_Pos    (20U)         
-#define EXTI_SWIER_SWI20_Msk    (0x1UL << EXTI_SWIER_SWI20_Pos)                 /*!< 0x00100000 */
-#define EXTI_SWIER_SWI20        EXTI_SWIER_SWI20_Msk                           /*!< Software Interrupt on line 20 */
-#define EXTI_SWIER_SWI21_Pos    (21U)         
-#define EXTI_SWIER_SWI21_Msk    (0x1UL << EXTI_SWIER_SWI21_Pos)                 /*!< 0x00200000 */
-#define EXTI_SWIER_SWI21        EXTI_SWIER_SWI21_Msk                           /*!< Software Interrupt on line 21 */
-#define EXTI_SWIER_SWI22_Pos    (22U)         
-#define EXTI_SWIER_SWI22_Msk    (0x1UL << EXTI_SWIER_SWI22_Pos)                 /*!< 0x00400000 */
-#define EXTI_SWIER_SWI22        EXTI_SWIER_SWI22_Msk                           /*!< Software Interrupt on line 22 */
-
-/* Legacy defines */
-#define EXTI_SWIER_SWIER0                   EXTI_SWIER_SWI0
-#define EXTI_SWIER_SWIER1                   EXTI_SWIER_SWI1
-#define EXTI_SWIER_SWIER2                   EXTI_SWIER_SWI2
-#define EXTI_SWIER_SWIER3                   EXTI_SWIER_SWI3
-#define EXTI_SWIER_SWIER4                   EXTI_SWIER_SWI4
-#define EXTI_SWIER_SWIER5                   EXTI_SWIER_SWI5
-#define EXTI_SWIER_SWIER6                   EXTI_SWIER_SWI6
-#define EXTI_SWIER_SWIER7                   EXTI_SWIER_SWI7
-#define EXTI_SWIER_SWIER8                   EXTI_SWIER_SWI8
-#define EXTI_SWIER_SWIER9                   EXTI_SWIER_SWI9
-#define EXTI_SWIER_SWIER10                  EXTI_SWIER_SWI10
-#define EXTI_SWIER_SWIER11                  EXTI_SWIER_SWI11
-#define EXTI_SWIER_SWIER12                  EXTI_SWIER_SWI12
-#define EXTI_SWIER_SWIER13                  EXTI_SWIER_SWI13
-#define EXTI_SWIER_SWIER14                  EXTI_SWIER_SWI14
-#define EXTI_SWIER_SWIER15                  EXTI_SWIER_SWI15
-#define EXTI_SWIER_SWIER16                  EXTI_SWIER_SWI16
-#define EXTI_SWIER_SWIER17                  EXTI_SWIER_SWI17
-#define EXTI_SWIER_SWIER19                  EXTI_SWIER_SWI19
-#define EXTI_SWIER_SWIER20                  EXTI_SWIER_SWI20
-#define EXTI_SWIER_SWIER21                  EXTI_SWIER_SWI21
-#define EXTI_SWIER_SWIER22                  EXTI_SWIER_SWI22
-
-/******************  Bit definition for EXTI_PR register  *********************/
-#define EXTI_PR_PIF0_Pos        (0U)          
-#define EXTI_PR_PIF0_Msk        (0x1UL << EXTI_PR_PIF0_Pos)                     /*!< 0x00000001 */
-#define EXTI_PR_PIF0            EXTI_PR_PIF0_Msk                               /*!< Pending bit 0  */
-#define EXTI_PR_PIF1_Pos        (1U)          
-#define EXTI_PR_PIF1_Msk        (0x1UL << EXTI_PR_PIF1_Pos)                     /*!< 0x00000002 */
-#define EXTI_PR_PIF1            EXTI_PR_PIF1_Msk                               /*!< Pending bit 1  */
-#define EXTI_PR_PIF2_Pos        (2U)          
-#define EXTI_PR_PIF2_Msk        (0x1UL << EXTI_PR_PIF2_Pos)                     /*!< 0x00000004 */
-#define EXTI_PR_PIF2            EXTI_PR_PIF2_Msk                               /*!< Pending bit 2  */
-#define EXTI_PR_PIF3_Pos        (3U)          
-#define EXTI_PR_PIF3_Msk        (0x1UL << EXTI_PR_PIF3_Pos)                     /*!< 0x00000008 */
-#define EXTI_PR_PIF3            EXTI_PR_PIF3_Msk                               /*!< Pending bit 3  */
-#define EXTI_PR_PIF4_Pos        (4U)          
-#define EXTI_PR_PIF4_Msk        (0x1UL << EXTI_PR_PIF4_Pos)                     /*!< 0x00000010 */
-#define EXTI_PR_PIF4            EXTI_PR_PIF4_Msk                               /*!< Pending bit 4  */
-#define EXTI_PR_PIF5_Pos        (5U)          
-#define EXTI_PR_PIF5_Msk        (0x1UL << EXTI_PR_PIF5_Pos)                     /*!< 0x00000020 */
-#define EXTI_PR_PIF5            EXTI_PR_PIF5_Msk                               /*!< Pending bit 5  */
-#define EXTI_PR_PIF6_Pos        (6U)          
-#define EXTI_PR_PIF6_Msk        (0x1UL << EXTI_PR_PIF6_Pos)                     /*!< 0x00000040 */
-#define EXTI_PR_PIF6            EXTI_PR_PIF6_Msk                               /*!< Pending bit 6  */
-#define EXTI_PR_PIF7_Pos        (7U)          
-#define EXTI_PR_PIF7_Msk        (0x1UL << EXTI_PR_PIF7_Pos)                     /*!< 0x00000080 */
-#define EXTI_PR_PIF7            EXTI_PR_PIF7_Msk                               /*!< Pending bit 7  */
-#define EXTI_PR_PIF8_Pos        (8U)          
-#define EXTI_PR_PIF8_Msk        (0x1UL << EXTI_PR_PIF8_Pos)                     /*!< 0x00000100 */
-#define EXTI_PR_PIF8            EXTI_PR_PIF8_Msk                               /*!< Pending bit 8  */
-#define EXTI_PR_PIF9_Pos        (9U)          
-#define EXTI_PR_PIF9_Msk        (0x1UL << EXTI_PR_PIF9_Pos)                     /*!< 0x00000200 */
-#define EXTI_PR_PIF9            EXTI_PR_PIF9_Msk                               /*!< Pending bit 9  */
-#define EXTI_PR_PIF10_Pos       (10U)         
-#define EXTI_PR_PIF10_Msk       (0x1UL << EXTI_PR_PIF10_Pos)                    /*!< 0x00000400 */
-#define EXTI_PR_PIF10           EXTI_PR_PIF10_Msk                              /*!< Pending bit 10 */
-#define EXTI_PR_PIF11_Pos       (11U)         
-#define EXTI_PR_PIF11_Msk       (0x1UL << EXTI_PR_PIF11_Pos)                    /*!< 0x00000800 */
-#define EXTI_PR_PIF11           EXTI_PR_PIF11_Msk                              /*!< Pending bit 11 */
-#define EXTI_PR_PIF12_Pos       (12U)         
-#define EXTI_PR_PIF12_Msk       (0x1UL << EXTI_PR_PIF12_Pos)                    /*!< 0x00001000 */
-#define EXTI_PR_PIF12           EXTI_PR_PIF12_Msk                              /*!< Pending bit 12 */
-#define EXTI_PR_PIF13_Pos       (13U)         
-#define EXTI_PR_PIF13_Msk       (0x1UL << EXTI_PR_PIF13_Pos)                    /*!< 0x00002000 */
-#define EXTI_PR_PIF13           EXTI_PR_PIF13_Msk                              /*!< Pending bit 13 */
-#define EXTI_PR_PIF14_Pos       (14U)         
-#define EXTI_PR_PIF14_Msk       (0x1UL << EXTI_PR_PIF14_Pos)                    /*!< 0x00004000 */
-#define EXTI_PR_PIF14           EXTI_PR_PIF14_Msk                              /*!< Pending bit 14 */
-#define EXTI_PR_PIF15_Pos       (15U)         
-#define EXTI_PR_PIF15_Msk       (0x1UL << EXTI_PR_PIF15_Pos)                    /*!< 0x00008000 */
-#define EXTI_PR_PIF15           EXTI_PR_PIF15_Msk                              /*!< Pending bit 15 */
-#define EXTI_PR_PIF16_Pos       (16U)         
-#define EXTI_PR_PIF16_Msk       (0x1UL << EXTI_PR_PIF16_Pos)                    /*!< 0x00010000 */
-#define EXTI_PR_PIF16           EXTI_PR_PIF16_Msk                              /*!< Pending bit 16 */
-#define EXTI_PR_PIF17_Pos       (17U)         
-#define EXTI_PR_PIF17_Msk       (0x1UL << EXTI_PR_PIF17_Pos)                    /*!< 0x00020000 */
-#define EXTI_PR_PIF17           EXTI_PR_PIF17_Msk                              /*!< Pending bit 17 */
-#define EXTI_PR_PIF19_Pos       (19U)         
-#define EXTI_PR_PIF19_Msk       (0x1UL << EXTI_PR_PIF19_Pos)                    /*!< 0x00080000 */
-#define EXTI_PR_PIF19           EXTI_PR_PIF19_Msk                              /*!< Pending bit 19 */
-#define EXTI_PR_PIF20_Pos       (20U)         
-#define EXTI_PR_PIF20_Msk       (0x1UL << EXTI_PR_PIF20_Pos)                    /*!< 0x00100000 */
-#define EXTI_PR_PIF20           EXTI_PR_PIF20_Msk                              /*!< Pending bit 20 */
-#define EXTI_PR_PIF21_Pos       (21U)         
-#define EXTI_PR_PIF21_Msk       (0x1UL << EXTI_PR_PIF21_Pos)                    /*!< 0x00200000 */
-#define EXTI_PR_PIF21           EXTI_PR_PIF21_Msk                              /*!< Pending bit 21 */
-#define EXTI_PR_PIF22_Pos       (22U)         
-#define EXTI_PR_PIF22_Msk       (0x1UL << EXTI_PR_PIF22_Pos)                    /*!< 0x00400000 */
-#define EXTI_PR_PIF22           EXTI_PR_PIF22_Msk                              /*!< Pending bit 22 */
-
-/* Legacy defines */
-#define EXTI_PR_PR0                         EXTI_PR_PIF0
-#define EXTI_PR_PR1                         EXTI_PR_PIF1
-#define EXTI_PR_PR2                         EXTI_PR_PIF2
-#define EXTI_PR_PR3                         EXTI_PR_PIF3
-#define EXTI_PR_PR4                         EXTI_PR_PIF4
-#define EXTI_PR_PR5                         EXTI_PR_PIF5
-#define EXTI_PR_PR6                         EXTI_PR_PIF6
-#define EXTI_PR_PR7                         EXTI_PR_PIF7
-#define EXTI_PR_PR8                         EXTI_PR_PIF8
-#define EXTI_PR_PR9                         EXTI_PR_PIF9
-#define EXTI_PR_PR10                        EXTI_PR_PIF10
-#define EXTI_PR_PR11                        EXTI_PR_PIF11
-#define EXTI_PR_PR12                        EXTI_PR_PIF12
-#define EXTI_PR_PR13                        EXTI_PR_PIF13
-#define EXTI_PR_PR14                        EXTI_PR_PIF14
-#define EXTI_PR_PR15                        EXTI_PR_PIF15
-#define EXTI_PR_PR16                        EXTI_PR_PIF16
-#define EXTI_PR_PR17                        EXTI_PR_PIF17
-#define EXTI_PR_PR19                        EXTI_PR_PIF19
-#define EXTI_PR_PR20                        EXTI_PR_PIF20
-#define EXTI_PR_PR21                        EXTI_PR_PIF21
-#define EXTI_PR_PR22                        EXTI_PR_PIF22
-
-/******************************************************************************/
-/*                                                                            */
-/*                      FLASH and Option Bytes Registers                      */
-/*                                                                            */
-/******************************************************************************/
-
-/*******************  Bit definition for FLASH_ACR register  ******************/
-#define FLASH_ACR_LATENCY_Pos        (0U)     
-#define FLASH_ACR_LATENCY_Msk        (0x1UL << FLASH_ACR_LATENCY_Pos)           /*!< 0x00000001 */
-#define FLASH_ACR_LATENCY            FLASH_ACR_LATENCY_Msk                     /*!< LATENCY bit (Latency) */
-#define FLASH_ACR_PRFTEN_Pos         (1U)     
-#define FLASH_ACR_PRFTEN_Msk         (0x1UL << FLASH_ACR_PRFTEN_Pos)            /*!< 0x00000002 */
-#define FLASH_ACR_PRFTEN             FLASH_ACR_PRFTEN_Msk                      /*!< Prefetch Buffer Enable */
-#define FLASH_ACR_SLEEP_PD_Pos       (3U)     
-#define FLASH_ACR_SLEEP_PD_Msk       (0x1UL << FLASH_ACR_SLEEP_PD_Pos)          /*!< 0x00000008 */
-#define FLASH_ACR_SLEEP_PD           FLASH_ACR_SLEEP_PD_Msk                    /*!< Flash mode during sleep mode */
-#define FLASH_ACR_RUN_PD_Pos         (4U)     
-#define FLASH_ACR_RUN_PD_Msk         (0x1UL << FLASH_ACR_RUN_PD_Pos)            /*!< 0x00000010 */
-#define FLASH_ACR_RUN_PD             FLASH_ACR_RUN_PD_Msk                      /*!< Flash mode during RUN mode */
-#define FLASH_ACR_DISAB_BUF_Pos      (5U)     
-#define FLASH_ACR_DISAB_BUF_Msk      (0x1UL << FLASH_ACR_DISAB_BUF_Pos)         /*!< 0x00000020 */
-#define FLASH_ACR_DISAB_BUF          FLASH_ACR_DISAB_BUF_Msk                   /*!< Disable Buffer */
-#define FLASH_ACR_PRE_READ_Pos       (6U)     
-#define FLASH_ACR_PRE_READ_Msk       (0x1UL << FLASH_ACR_PRE_READ_Pos)          /*!< 0x00000040 */
-#define FLASH_ACR_PRE_READ           FLASH_ACR_PRE_READ_Msk                    /*!< Pre-read data address */
-
-/*******************  Bit definition for FLASH_PECR register  ******************/
-#define FLASH_PECR_PELOCK_Pos        (0U)     
-#define FLASH_PECR_PELOCK_Msk        (0x1UL << FLASH_PECR_PELOCK_Pos)           /*!< 0x00000001 */
-#define FLASH_PECR_PELOCK            FLASH_PECR_PELOCK_Msk                     /*!< FLASH_PECR and Flash data Lock */
-#define FLASH_PECR_PRGLOCK_Pos       (1U)     
-#define FLASH_PECR_PRGLOCK_Msk       (0x1UL << FLASH_PECR_PRGLOCK_Pos)          /*!< 0x00000002 */
-#define FLASH_PECR_PRGLOCK           FLASH_PECR_PRGLOCK_Msk                    /*!< Program matrix Lock */
-#define FLASH_PECR_OPTLOCK_Pos       (2U)     
-#define FLASH_PECR_OPTLOCK_Msk       (0x1UL << FLASH_PECR_OPTLOCK_Pos)          /*!< 0x00000004 */
-#define FLASH_PECR_OPTLOCK           FLASH_PECR_OPTLOCK_Msk                    /*!< Option byte matrix Lock */
-#define FLASH_PECR_PROG_Pos          (3U)     
-#define FLASH_PECR_PROG_Msk          (0x1UL << FLASH_PECR_PROG_Pos)             /*!< 0x00000008 */
-#define FLASH_PECR_PROG              FLASH_PECR_PROG_Msk                       /*!< Program matrix selection */
-#define FLASH_PECR_DATA_Pos          (4U)     
-#define FLASH_PECR_DATA_Msk          (0x1UL << FLASH_PECR_DATA_Pos)             /*!< 0x00000010 */
-#define FLASH_PECR_DATA              FLASH_PECR_DATA_Msk                       /*!< Data matrix selection */
-#define FLASH_PECR_FIX_Pos           (8U)     
-#define FLASH_PECR_FIX_Msk           (0x1UL << FLASH_PECR_FIX_Pos)              /*!< 0x00000100 */
-#define FLASH_PECR_FIX               FLASH_PECR_FIX_Msk                        /*!< Fixed Time Data write for Word/Half Word/Byte programming */
-#define FLASH_PECR_ERASE_Pos         (9U)     
-#define FLASH_PECR_ERASE_Msk         (0x1UL << FLASH_PECR_ERASE_Pos)            /*!< 0x00000200 */
-#define FLASH_PECR_ERASE             FLASH_PECR_ERASE_Msk                      /*!< Page erasing mode */
-#define FLASH_PECR_FPRG_Pos          (10U)    
-#define FLASH_PECR_FPRG_Msk          (0x1UL << FLASH_PECR_FPRG_Pos)             /*!< 0x00000400 */
-#define FLASH_PECR_FPRG              FLASH_PECR_FPRG_Msk                       /*!< Fast Page/Half Page programming mode */
-#define FLASH_PECR_EOPIE_Pos         (16U)    
-#define FLASH_PECR_EOPIE_Msk         (0x1UL << FLASH_PECR_EOPIE_Pos)            /*!< 0x00010000 */
-#define FLASH_PECR_EOPIE             FLASH_PECR_EOPIE_Msk                      /*!< End of programming interrupt */ 
-#define FLASH_PECR_ERRIE_Pos         (17U)    
-#define FLASH_PECR_ERRIE_Msk         (0x1UL << FLASH_PECR_ERRIE_Pos)            /*!< 0x00020000 */
-#define FLASH_PECR_ERRIE             FLASH_PECR_ERRIE_Msk                      /*!< Error interrupt */ 
-#define FLASH_PECR_OBL_LAUNCH_Pos    (18U)    
-#define FLASH_PECR_OBL_LAUNCH_Msk    (0x1UL << FLASH_PECR_OBL_LAUNCH_Pos)       /*!< 0x00040000 */
-#define FLASH_PECR_OBL_LAUNCH        FLASH_PECR_OBL_LAUNCH_Msk                 /*!< Launch the option byte loading */
-#define FLASH_PECR_HALF_ARRAY_Pos    (19U)    
-#define FLASH_PECR_HALF_ARRAY_Msk    (0x1UL << FLASH_PECR_HALF_ARRAY_Pos)       /*!< 0x00080000 */
-#define FLASH_PECR_HALF_ARRAY        FLASH_PECR_HALF_ARRAY_Msk                 /*!< Half array mode */
-
-/******************  Bit definition for FLASH_PDKEYR register  ******************/
-#define FLASH_PDKEYR_PDKEYR_Pos      (0U)     
-#define FLASH_PDKEYR_PDKEYR_Msk      (0xFFFFFFFFUL << FLASH_PDKEYR_PDKEYR_Pos)  /*!< 0xFFFFFFFF */
-#define FLASH_PDKEYR_PDKEYR          FLASH_PDKEYR_PDKEYR_Msk                   /*!< FLASH_PEC and data matrix Key */
-
-/******************  Bit definition for FLASH_PEKEYR register  ******************/
-#define FLASH_PEKEYR_PEKEYR_Pos      (0U)     
-#define FLASH_PEKEYR_PEKEYR_Msk      (0xFFFFFFFFUL << FLASH_PEKEYR_PEKEYR_Pos)  /*!< 0xFFFFFFFF */
-#define FLASH_PEKEYR_PEKEYR          FLASH_PEKEYR_PEKEYR_Msk                   /*!< FLASH_PEC and data matrix Key */
-
-/******************  Bit definition for FLASH_PRGKEYR register  ******************/
-#define FLASH_PRGKEYR_PRGKEYR_Pos    (0U)     
-#define FLASH_PRGKEYR_PRGKEYR_Msk    (0xFFFFFFFFUL << FLASH_PRGKEYR_PRGKEYR_Pos) /*!< 0xFFFFFFFF */
-#define FLASH_PRGKEYR_PRGKEYR        FLASH_PRGKEYR_PRGKEYR_Msk                 /*!< Program matrix Key */
-
-/******************  Bit definition for FLASH_OPTKEYR register  ******************/
-#define FLASH_OPTKEYR_OPTKEYR_Pos    (0U)     
-#define FLASH_OPTKEYR_OPTKEYR_Msk    (0xFFFFFFFFUL << FLASH_OPTKEYR_OPTKEYR_Pos) /*!< 0xFFFFFFFF */
-#define FLASH_OPTKEYR_OPTKEYR        FLASH_OPTKEYR_OPTKEYR_Msk                 /*!< Option bytes matrix Key */
-
-/******************  Bit definition for FLASH_SR register  *******************/
-#define FLASH_SR_BSY_Pos             (0U)     
-#define FLASH_SR_BSY_Msk             (0x1UL << FLASH_SR_BSY_Pos)                /*!< 0x00000001 */
-#define FLASH_SR_BSY                 FLASH_SR_BSY_Msk                          /*!< Busy */
-#define FLASH_SR_EOP_Pos             (1U)     
-#define FLASH_SR_EOP_Msk             (0x1UL << FLASH_SR_EOP_Pos)                /*!< 0x00000002 */
-#define FLASH_SR_EOP                 FLASH_SR_EOP_Msk                          /*!< End Of Programming*/
-#define FLASH_SR_HVOFF_Pos           (2U)     
-#define FLASH_SR_HVOFF_Msk           (0x1UL << FLASH_SR_HVOFF_Pos)              /*!< 0x00000004 */
-#define FLASH_SR_HVOFF               FLASH_SR_HVOFF_Msk                        /*!< End of high voltage */
-#define FLASH_SR_READY_Pos           (3U)     
-#define FLASH_SR_READY_Msk           (0x1UL << FLASH_SR_READY_Pos)              /*!< 0x00000008 */
-#define FLASH_SR_READY               FLASH_SR_READY_Msk                        /*!< Flash ready after low power mode */
-
-#define FLASH_SR_WRPERR_Pos          (8U)     
-#define FLASH_SR_WRPERR_Msk          (0x1UL << FLASH_SR_WRPERR_Pos)             /*!< 0x00000100 */
-#define FLASH_SR_WRPERR              FLASH_SR_WRPERR_Msk                       /*!< Write protection error */
-#define FLASH_SR_PGAERR_Pos          (9U)     
-#define FLASH_SR_PGAERR_Msk          (0x1UL << FLASH_SR_PGAERR_Pos)             /*!< 0x00000200 */
-#define FLASH_SR_PGAERR              FLASH_SR_PGAERR_Msk                       /*!< Programming Alignment Error */
-#define FLASH_SR_SIZERR_Pos          (10U)    
-#define FLASH_SR_SIZERR_Msk          (0x1UL << FLASH_SR_SIZERR_Pos)             /*!< 0x00000400 */
-#define FLASH_SR_SIZERR              FLASH_SR_SIZERR_Msk                       /*!< Size error */
-#define FLASH_SR_OPTVERR_Pos         (11U)    
-#define FLASH_SR_OPTVERR_Msk         (0x1UL << FLASH_SR_OPTVERR_Pos)            /*!< 0x00000800 */
-#define FLASH_SR_OPTVERR             FLASH_SR_OPTVERR_Msk                      /*!< Option Valid error */
-#define FLASH_SR_RDERR_Pos           (13U)    
-#define FLASH_SR_RDERR_Msk           (0x1UL << FLASH_SR_RDERR_Pos)              /*!< 0x00002000 */
-#define FLASH_SR_RDERR               FLASH_SR_RDERR_Msk                        /*!< Read protected error */
-#define FLASH_SR_NOTZEROERR_Pos      (16U)    
-#define FLASH_SR_NOTZEROERR_Msk      (0x1UL << FLASH_SR_NOTZEROERR_Pos)         /*!< 0x00010000 */
-#define FLASH_SR_NOTZEROERR          FLASH_SR_NOTZEROERR_Msk                   /*!< Not Zero error */
-#define FLASH_SR_FWWERR_Pos          (17U)    
-#define FLASH_SR_FWWERR_Msk          (0x1UL << FLASH_SR_FWWERR_Pos)             /*!< 0x00020000 */
-#define FLASH_SR_FWWERR              FLASH_SR_FWWERR_Msk                       /*!< Write/Errase operation aborted */
-
-/* Legacy defines */
-#define FLASH_SR_FWWER                      FLASH_SR_FWWERR
-#define FLASH_SR_ENHV                       FLASH_SR_HVOFF
-#define FLASH_SR_ENDHV                      FLASH_SR_HVOFF
-
-/******************  Bit definition for FLASH_OPTR register  *******************/
-#define FLASH_OPTR_RDPROT_Pos        (0U)     
-#define FLASH_OPTR_RDPROT_Msk        (0xFFUL << FLASH_OPTR_RDPROT_Pos)          /*!< 0x000000FF */
-#define FLASH_OPTR_RDPROT            FLASH_OPTR_RDPROT_Msk                     /*!< Read Protection */
-#define FLASH_OPTR_WPRMOD_Pos        (8U)     
-#define FLASH_OPTR_WPRMOD_Msk        (0x1UL << FLASH_OPTR_WPRMOD_Pos)           /*!< 0x00000100 */
-#define FLASH_OPTR_WPRMOD            FLASH_OPTR_WPRMOD_Msk                     /*!< Selection of protection mode of WPR bits */
-#define FLASH_OPTR_BOR_LEV_Pos       (16U)    
-#define FLASH_OPTR_BOR_LEV_Msk       (0xFUL << FLASH_OPTR_BOR_LEV_Pos)          /*!< 0x000F0000 */
-#define FLASH_OPTR_BOR_LEV           FLASH_OPTR_BOR_LEV_Msk                    /*!< BOR_LEV[3:0] Brown Out Reset Threshold Level*/
-#define FLASH_OPTR_IWDG_SW_Pos       (20U)    
-#define FLASH_OPTR_IWDG_SW_Msk       (0x1UL << FLASH_OPTR_IWDG_SW_Pos)          /*!< 0x00100000 */
-#define FLASH_OPTR_IWDG_SW           FLASH_OPTR_IWDG_SW_Msk                    /*!< IWDG_SW */
-#define FLASH_OPTR_nRST_STOP_Pos     (21U)    
-#define FLASH_OPTR_nRST_STOP_Msk     (0x1UL << FLASH_OPTR_nRST_STOP_Pos)        /*!< 0x00200000 */
-#define FLASH_OPTR_nRST_STOP         FLASH_OPTR_nRST_STOP_Msk                  /*!< nRST_STOP */
-#define FLASH_OPTR_nRST_STDBY_Pos    (22U)    
-#define FLASH_OPTR_nRST_STDBY_Msk    (0x1UL << FLASH_OPTR_nRST_STDBY_Pos)       /*!< 0x00400000 */
-#define FLASH_OPTR_nRST_STDBY        FLASH_OPTR_nRST_STDBY_Msk                 /*!< nRST_STDBY */
-#define FLASH_OPTR_USER_Pos          (20U)    
-#define FLASH_OPTR_USER_Msk          (0x7UL << FLASH_OPTR_USER_Pos)             /*!< 0x00700000 */
-#define FLASH_OPTR_USER              FLASH_OPTR_USER_Msk                       /*!< User Option Bytes */
-#define FLASH_OPTR_BOOT1_Pos         (31U)    
-#define FLASH_OPTR_BOOT1_Msk         (0x1UL << FLASH_OPTR_BOOT1_Pos)            /*!< 0x80000000 */
-#define FLASH_OPTR_BOOT1             FLASH_OPTR_BOOT1_Msk                      /*!< BOOT1 */
-
-/******************  Bit definition for FLASH_WRPR register  ******************/
-#define FLASH_WRPR_WRP_Pos           (0U)     
-#define FLASH_WRPR_WRP_Msk           (0xFFFFUL << FLASH_WRPR_WRP_Pos)           /*!< 0x0000FFFF */
-#define FLASH_WRPR_WRP               FLASH_WRPR_WRP_Msk                        /*!< Write Protection bits */
-
-/******************************************************************************/
-/*                                                                            */
-/*                       General Purpose IOs (GPIO)                           */
-/*                                                                            */
-/******************************************************************************/
-/*******************  Bit definition for GPIO_MODER register  *****************/
-#define GPIO_MODER_MODE0_Pos            (0U)  
-#define GPIO_MODER_MODE0_Msk            (0x3UL << GPIO_MODER_MODE0_Pos)         /*!< 0x00000003 */
-#define GPIO_MODER_MODE0                GPIO_MODER_MODE0_Msk                   
-#define GPIO_MODER_MODE0_0              (0x1UL << GPIO_MODER_MODE0_Pos)         /*!< 0x00000001 */
-#define GPIO_MODER_MODE0_1              (0x2UL << GPIO_MODER_MODE0_Pos)         /*!< 0x00000002 */
-#define GPIO_MODER_MODE1_Pos            (2U)  
-#define GPIO_MODER_MODE1_Msk            (0x3UL << GPIO_MODER_MODE1_Pos)         /*!< 0x0000000C */
-#define GPIO_MODER_MODE1                GPIO_MODER_MODE1_Msk                   
-#define GPIO_MODER_MODE1_0              (0x1UL << GPIO_MODER_MODE1_Pos)         /*!< 0x00000004 */
-#define GPIO_MODER_MODE1_1              (0x2UL << GPIO_MODER_MODE1_Pos)         /*!< 0x00000008 */
-#define GPIO_MODER_MODE2_Pos            (4U)  
-#define GPIO_MODER_MODE2_Msk            (0x3UL << GPIO_MODER_MODE2_Pos)         /*!< 0x00000030 */
-#define GPIO_MODER_MODE2                GPIO_MODER_MODE2_Msk                   
-#define GPIO_MODER_MODE2_0              (0x1UL << GPIO_MODER_MODE2_Pos)         /*!< 0x00000010 */
-#define GPIO_MODER_MODE2_1              (0x2UL << GPIO_MODER_MODE2_Pos)         /*!< 0x00000020 */
-#define GPIO_MODER_MODE3_Pos            (6U)  
-#define GPIO_MODER_MODE3_Msk            (0x3UL << GPIO_MODER_MODE3_Pos)         /*!< 0x000000C0 */
-#define GPIO_MODER_MODE3                GPIO_MODER_MODE3_Msk                   
-#define GPIO_MODER_MODE3_0              (0x1UL << GPIO_MODER_MODE3_Pos)         /*!< 0x00000040 */
-#define GPIO_MODER_MODE3_1              (0x2UL << GPIO_MODER_MODE3_Pos)         /*!< 0x00000080 */
-#define GPIO_MODER_MODE4_Pos            (8U)  
-#define GPIO_MODER_MODE4_Msk            (0x3UL << GPIO_MODER_MODE4_Pos)         /*!< 0x00000300 */
-#define GPIO_MODER_MODE4                GPIO_MODER_MODE4_Msk                   
-#define GPIO_MODER_MODE4_0              (0x1UL << GPIO_MODER_MODE4_Pos)         /*!< 0x00000100 */
-#define GPIO_MODER_MODE4_1              (0x2UL << GPIO_MODER_MODE4_Pos)         /*!< 0x00000200 */
-#define GPIO_MODER_MODE5_Pos            (10U) 
-#define GPIO_MODER_MODE5_Msk            (0x3UL << GPIO_MODER_MODE5_Pos)         /*!< 0x00000C00 */
-#define GPIO_MODER_MODE5                GPIO_MODER_MODE5_Msk                   
-#define GPIO_MODER_MODE5_0              (0x1UL << GPIO_MODER_MODE5_Pos)         /*!< 0x00000400 */
-#define GPIO_MODER_MODE5_1              (0x2UL << GPIO_MODER_MODE5_Pos)         /*!< 0x00000800 */
-#define GPIO_MODER_MODE6_Pos            (12U) 
-#define GPIO_MODER_MODE6_Msk            (0x3UL << GPIO_MODER_MODE6_Pos)         /*!< 0x00003000 */
-#define GPIO_MODER_MODE6                GPIO_MODER_MODE6_Msk                   
-#define GPIO_MODER_MODE6_0              (0x1UL << GPIO_MODER_MODE6_Pos)         /*!< 0x00001000 */
-#define GPIO_MODER_MODE6_1              (0x2UL << GPIO_MODER_MODE6_Pos)         /*!< 0x00002000 */
-#define GPIO_MODER_MODE7_Pos            (14U) 
-#define GPIO_MODER_MODE7_Msk            (0x3UL << GPIO_MODER_MODE7_Pos)         /*!< 0x0000C000 */
-#define GPIO_MODER_MODE7                GPIO_MODER_MODE7_Msk                   
-#define GPIO_MODER_MODE7_0              (0x1UL << GPIO_MODER_MODE7_Pos)         /*!< 0x00004000 */
-#define GPIO_MODER_MODE7_1              (0x2UL << GPIO_MODER_MODE7_Pos)         /*!< 0x00008000 */
-#define GPIO_MODER_MODE8_Pos            (16U) 
-#define GPIO_MODER_MODE8_Msk            (0x3UL << GPIO_MODER_MODE8_Pos)         /*!< 0x00030000 */
-#define GPIO_MODER_MODE8                GPIO_MODER_MODE8_Msk                   
-#define GPIO_MODER_MODE8_0              (0x1UL << GPIO_MODER_MODE8_Pos)         /*!< 0x00010000 */
-#define GPIO_MODER_MODE8_1              (0x2UL << GPIO_MODER_MODE8_Pos)         /*!< 0x00020000 */
-#define GPIO_MODER_MODE9_Pos            (18U) 
-#define GPIO_MODER_MODE9_Msk            (0x3UL << GPIO_MODER_MODE9_Pos)         /*!< 0x000C0000 */
-#define GPIO_MODER_MODE9                GPIO_MODER_MODE9_Msk                   
-#define GPIO_MODER_MODE9_0              (0x1UL << GPIO_MODER_MODE9_Pos)         /*!< 0x00040000 */
-#define GPIO_MODER_MODE9_1              (0x2UL << GPIO_MODER_MODE9_Pos)         /*!< 0x00080000 */
-#define GPIO_MODER_MODE10_Pos           (20U) 
-#define GPIO_MODER_MODE10_Msk           (0x3UL << GPIO_MODER_MODE10_Pos)        /*!< 0x00300000 */
-#define GPIO_MODER_MODE10               GPIO_MODER_MODE10_Msk                  
-#define GPIO_MODER_MODE10_0             (0x1UL << GPIO_MODER_MODE10_Pos)        /*!< 0x00100000 */
-#define GPIO_MODER_MODE10_1             (0x2UL << GPIO_MODER_MODE10_Pos)        /*!< 0x00200000 */
-#define GPIO_MODER_MODE11_Pos           (22U) 
-#define GPIO_MODER_MODE11_Msk           (0x3UL << GPIO_MODER_MODE11_Pos)        /*!< 0x00C00000 */
-#define GPIO_MODER_MODE11               GPIO_MODER_MODE11_Msk                  
-#define GPIO_MODER_MODE11_0             (0x1UL << GPIO_MODER_MODE11_Pos)        /*!< 0x00400000 */
-#define GPIO_MODER_MODE11_1             (0x2UL << GPIO_MODER_MODE11_Pos)        /*!< 0x00800000 */
-#define GPIO_MODER_MODE12_Pos           (24U) 
-#define GPIO_MODER_MODE12_Msk           (0x3UL << GPIO_MODER_MODE12_Pos)        /*!< 0x03000000 */
-#define GPIO_MODER_MODE12               GPIO_MODER_MODE12_Msk                  
-#define GPIO_MODER_MODE12_0             (0x1UL << GPIO_MODER_MODE12_Pos)        /*!< 0x01000000 */
-#define GPIO_MODER_MODE12_1             (0x2UL << GPIO_MODER_MODE12_Pos)        /*!< 0x02000000 */
-#define GPIO_MODER_MODE13_Pos           (26U) 
-#define GPIO_MODER_MODE13_Msk           (0x3UL << GPIO_MODER_MODE13_Pos)        /*!< 0x0C000000 */
-#define GPIO_MODER_MODE13               GPIO_MODER_MODE13_Msk                  
-#define GPIO_MODER_MODE13_0             (0x1UL << GPIO_MODER_MODE13_Pos)        /*!< 0x04000000 */
-#define GPIO_MODER_MODE13_1             (0x2UL << GPIO_MODER_MODE13_Pos)        /*!< 0x08000000 */
-#define GPIO_MODER_MODE14_Pos           (28U) 
-#define GPIO_MODER_MODE14_Msk           (0x3UL << GPIO_MODER_MODE14_Pos)        /*!< 0x30000000 */
-#define GPIO_MODER_MODE14               GPIO_MODER_MODE14_Msk                  
-#define GPIO_MODER_MODE14_0             (0x1UL << GPIO_MODER_MODE14_Pos)        /*!< 0x10000000 */
-#define GPIO_MODER_MODE14_1             (0x2UL << GPIO_MODER_MODE14_Pos)        /*!< 0x20000000 */
-#define GPIO_MODER_MODE15_Pos           (30U) 
-#define GPIO_MODER_MODE15_Msk           (0x3UL << GPIO_MODER_MODE15_Pos)        /*!< 0xC0000000 */
-#define GPIO_MODER_MODE15               GPIO_MODER_MODE15_Msk                  
-#define GPIO_MODER_MODE15_0             (0x1UL << GPIO_MODER_MODE15_Pos)        /*!< 0x40000000 */
-#define GPIO_MODER_MODE15_1             (0x2UL << GPIO_MODER_MODE15_Pos)        /*!< 0x80000000 */
-
-/******************  Bit definition for GPIO_OTYPER register  *****************/
-#define GPIO_OTYPER_OT_0                (0x00000001U)                          
-#define GPIO_OTYPER_OT_1                (0x00000002U)                          
-#define GPIO_OTYPER_OT_2                (0x00000004U)                          
-#define GPIO_OTYPER_OT_3                (0x00000008U)                          
-#define GPIO_OTYPER_OT_4                (0x00000010U)                          
-#define GPIO_OTYPER_OT_5                (0x00000020U)                          
-#define GPIO_OTYPER_OT_6                (0x00000040U)                          
-#define GPIO_OTYPER_OT_7                (0x00000080U)                          
-#define GPIO_OTYPER_OT_8                (0x00000100U)                          
-#define GPIO_OTYPER_OT_9                (0x00000200U)                          
-#define GPIO_OTYPER_OT_10               (0x00000400U)                          
-#define GPIO_OTYPER_OT_11               (0x00000800U)                          
-#define GPIO_OTYPER_OT_12               (0x00001000U)                          
-#define GPIO_OTYPER_OT_13               (0x00002000U)                          
-#define GPIO_OTYPER_OT_14               (0x00004000U)                          
-#define GPIO_OTYPER_OT_15               (0x00008000U)                          
-
-/****************  Bit definition for GPIO_OSPEEDR register  ******************/
-#define GPIO_OSPEEDER_OSPEED0_Pos       (0U)  
-#define GPIO_OSPEEDER_OSPEED0_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED0_Pos)    /*!< 0x00000003 */
-#define GPIO_OSPEEDER_OSPEED0           GPIO_OSPEEDER_OSPEED0_Msk              
-#define GPIO_OSPEEDER_OSPEED0_0         (0x1UL << GPIO_OSPEEDER_OSPEED0_Pos)    /*!< 0x00000001 */
-#define GPIO_OSPEEDER_OSPEED0_1         (0x2UL << GPIO_OSPEEDER_OSPEED0_Pos)    /*!< 0x00000002 */
-#define GPIO_OSPEEDER_OSPEED1_Pos       (2U)  
-#define GPIO_OSPEEDER_OSPEED1_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED1_Pos)    /*!< 0x0000000C */
-#define GPIO_OSPEEDER_OSPEED1           GPIO_OSPEEDER_OSPEED1_Msk              
-#define GPIO_OSPEEDER_OSPEED1_0         (0x1UL << GPIO_OSPEEDER_OSPEED1_Pos)    /*!< 0x00000004 */
-#define GPIO_OSPEEDER_OSPEED1_1         (0x2UL << GPIO_OSPEEDER_OSPEED1_Pos)    /*!< 0x00000008 */
-#define GPIO_OSPEEDER_OSPEED2_Pos       (4U)  
-#define GPIO_OSPEEDER_OSPEED2_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED2_Pos)    /*!< 0x00000030 */
-#define GPIO_OSPEEDER_OSPEED2           GPIO_OSPEEDER_OSPEED2_Msk              
-#define GPIO_OSPEEDER_OSPEED2_0         (0x1UL << GPIO_OSPEEDER_OSPEED2_Pos)    /*!< 0x00000010 */
-#define GPIO_OSPEEDER_OSPEED2_1         (0x2UL << GPIO_OSPEEDER_OSPEED2_Pos)    /*!< 0x00000020 */
-#define GPIO_OSPEEDER_OSPEED3_Pos       (6U)  
-#define GPIO_OSPEEDER_OSPEED3_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED3_Pos)    /*!< 0x000000C0 */
-#define GPIO_OSPEEDER_OSPEED3           GPIO_OSPEEDER_OSPEED3_Msk              
-#define GPIO_OSPEEDER_OSPEED3_0         (0x1UL << GPIO_OSPEEDER_OSPEED3_Pos)    /*!< 0x00000040 */
-#define GPIO_OSPEEDER_OSPEED3_1         (0x2UL << GPIO_OSPEEDER_OSPEED3_Pos)    /*!< 0x00000080 */
-#define GPIO_OSPEEDER_OSPEED4_Pos       (8U)  
-#define GPIO_OSPEEDER_OSPEED4_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED4_Pos)    /*!< 0x00000300 */
-#define GPIO_OSPEEDER_OSPEED4           GPIO_OSPEEDER_OSPEED4_Msk              
-#define GPIO_OSPEEDER_OSPEED4_0         (0x1UL << GPIO_OSPEEDER_OSPEED4_Pos)    /*!< 0x00000100 */
-#define GPIO_OSPEEDER_OSPEED4_1         (0x2UL << GPIO_OSPEEDER_OSPEED4_Pos)    /*!< 0x00000200 */
-#define GPIO_OSPEEDER_OSPEED5_Pos       (10U) 
-#define GPIO_OSPEEDER_OSPEED5_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED5_Pos)    /*!< 0x00000C00 */
-#define GPIO_OSPEEDER_OSPEED5           GPIO_OSPEEDER_OSPEED5_Msk              
-#define GPIO_OSPEEDER_OSPEED5_0         (0x1UL << GPIO_OSPEEDER_OSPEED5_Pos)    /*!< 0x00000400 */
-#define GPIO_OSPEEDER_OSPEED5_1         (0x2UL << GPIO_OSPEEDER_OSPEED5_Pos)    /*!< 0x00000800 */
-#define GPIO_OSPEEDER_OSPEED6_Pos       (12U) 
-#define GPIO_OSPEEDER_OSPEED6_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED6_Pos)    /*!< 0x00003000 */
-#define GPIO_OSPEEDER_OSPEED6           GPIO_OSPEEDER_OSPEED6_Msk              
-#define GPIO_OSPEEDER_OSPEED6_0         (0x1UL << GPIO_OSPEEDER_OSPEED6_Pos)    /*!< 0x00001000 */
-#define GPIO_OSPEEDER_OSPEED6_1         (0x2UL << GPIO_OSPEEDER_OSPEED6_Pos)    /*!< 0x00002000 */
-#define GPIO_OSPEEDER_OSPEED7_Pos       (14U) 
-#define GPIO_OSPEEDER_OSPEED7_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED7_Pos)    /*!< 0x0000C000 */
-#define GPIO_OSPEEDER_OSPEED7           GPIO_OSPEEDER_OSPEED7_Msk              
-#define GPIO_OSPEEDER_OSPEED7_0         (0x1UL << GPIO_OSPEEDER_OSPEED7_Pos)    /*!< 0x00004000 */
-#define GPIO_OSPEEDER_OSPEED7_1         (0x2UL << GPIO_OSPEEDER_OSPEED7_Pos)    /*!< 0x00008000 */
-#define GPIO_OSPEEDER_OSPEED8_Pos       (16U) 
-#define GPIO_OSPEEDER_OSPEED8_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED8_Pos)    /*!< 0x00030000 */
-#define GPIO_OSPEEDER_OSPEED8           GPIO_OSPEEDER_OSPEED8_Msk              
-#define GPIO_OSPEEDER_OSPEED8_0         (0x1UL << GPIO_OSPEEDER_OSPEED8_Pos)    /*!< 0x00010000 */
-#define GPIO_OSPEEDER_OSPEED8_1         (0x2UL << GPIO_OSPEEDER_OSPEED8_Pos)    /*!< 0x00020000 */
-#define GPIO_OSPEEDER_OSPEED9_Pos       (18U) 
-#define GPIO_OSPEEDER_OSPEED9_Msk       (0x3UL << GPIO_OSPEEDER_OSPEED9_Pos)    /*!< 0x000C0000 */
-#define GPIO_OSPEEDER_OSPEED9           GPIO_OSPEEDER_OSPEED9_Msk              
-#define GPIO_OSPEEDER_OSPEED9_0         (0x1UL << GPIO_OSPEEDER_OSPEED9_Pos)    /*!< 0x00040000 */
-#define GPIO_OSPEEDER_OSPEED9_1         (0x2UL << GPIO_OSPEEDER_OSPEED9_Pos)    /*!< 0x00080000 */
-#define GPIO_OSPEEDER_OSPEED10_Pos      (20U) 
-#define GPIO_OSPEEDER_OSPEED10_Msk      (0x3UL << GPIO_OSPEEDER_OSPEED10_Pos)   /*!< 0x00300000 */
-#define GPIO_OSPEEDER_OSPEED10          GPIO_OSPEEDER_OSPEED10_Msk             
-#define GPIO_OSPEEDER_OSPEED10_0        (0x1UL << GPIO_OSPEEDER_OSPEED10_Pos)   /*!< 0x00100000 */
-#define GPIO_OSPEEDER_OSPEED10_1        (0x2UL << GPIO_OSPEEDER_OSPEED10_Pos)   /*!< 0x00200000 */
-#define GPIO_OSPEEDER_OSPEED11_Pos      (22U) 
-#define GPIO_OSPEEDER_OSPEED11_Msk      (0x3UL << GPIO_OSPEEDER_OSPEED11_Pos)   /*!< 0x00C00000 */
-#define GPIO_OSPEEDER_OSPEED11          GPIO_OSPEEDER_OSPEED11_Msk             
-#define GPIO_OSPEEDER_OSPEED11_0        (0x1UL << GPIO_OSPEEDER_OSPEED11_Pos)   /*!< 0x00400000 */
-#define GPIO_OSPEEDER_OSPEED11_1        (0x2UL << GPIO_OSPEEDER_OSPEED11_Pos)   /*!< 0x00800000 */
-#define GPIO_OSPEEDER_OSPEED12_Pos      (24U) 
-#define GPIO_OSPEEDER_OSPEED12_Msk      (0x3UL << GPIO_OSPEEDER_OSPEED12_Pos)   /*!< 0x03000000 */
-#define GPIO_OSPEEDER_OSPEED12          GPIO_OSPEEDER_OSPEED12_Msk             
-#define GPIO_OSPEEDER_OSPEED12_0        (0x1UL << GPIO_OSPEEDER_OSPEED12_Pos)   /*!< 0x01000000 */
-#define GPIO_OSPEEDER_OSPEED12_1        (0x2UL << GPIO_OSPEEDER_OSPEED12_Pos)   /*!< 0x02000000 */
-#define GPIO_OSPEEDER_OSPEED13_Pos      (26U) 
-#define GPIO_OSPEEDER_OSPEED13_Msk      (0x3UL << GPIO_OSPEEDER_OSPEED13_Pos)   /*!< 0x0C000000 */
-#define GPIO_OSPEEDER_OSPEED13          GPIO_OSPEEDER_OSPEED13_Msk             
-#define GPIO_OSPEEDER_OSPEED13_0        (0x1UL << GPIO_OSPEEDER_OSPEED13_Pos)   /*!< 0x04000000 */
-#define GPIO_OSPEEDER_OSPEED13_1        (0x2UL << GPIO_OSPEEDER_OSPEED13_Pos)   /*!< 0x08000000 */
-#define GPIO_OSPEEDER_OSPEED14_Pos      (28U) 
-#define GPIO_OSPEEDER_OSPEED14_Msk      (0x3UL << GPIO_OSPEEDER_OSPEED14_Pos)   /*!< 0x30000000 */
-#define GPIO_OSPEEDER_OSPEED14          GPIO_OSPEEDER_OSPEED14_Msk             
-#define GPIO_OSPEEDER_OSPEED14_0        (0x1UL << GPIO_OSPEEDER_OSPEED14_Pos)   /*!< 0x10000000 */
-#define GPIO_OSPEEDER_OSPEED14_1        (0x2UL << GPIO_OSPEEDER_OSPEED14_Pos)   /*!< 0x20000000 */
-#define GPIO_OSPEEDER_OSPEED15_Pos      (30U) 
-#define GPIO_OSPEEDER_OSPEED15_Msk      (0x3UL << GPIO_OSPEEDER_OSPEED15_Pos)   /*!< 0xC0000000 */
-#define GPIO_OSPEEDER_OSPEED15          GPIO_OSPEEDER_OSPEED15_Msk             
-#define GPIO_OSPEEDER_OSPEED15_0        (0x1UL << GPIO_OSPEEDER_OSPEED15_Pos)   /*!< 0x40000000 */
-#define GPIO_OSPEEDER_OSPEED15_1        (0x2UL << GPIO_OSPEEDER_OSPEED15_Pos)   /*!< 0x80000000 */
-
-/*******************  Bit definition for GPIO_PUPDR register ******************/
-#define GPIO_PUPDR_PUPD0_Pos            (0U)  
-#define GPIO_PUPDR_PUPD0_Msk            (0x3UL << GPIO_PUPDR_PUPD0_Pos)         /*!< 0x00000003 */
-#define GPIO_PUPDR_PUPD0                GPIO_PUPDR_PUPD0_Msk                   
-#define GPIO_PUPDR_PUPD0_0              (0x1UL << GPIO_PUPDR_PUPD0_Pos)         /*!< 0x00000001 */
-#define GPIO_PUPDR_PUPD0_1              (0x2UL << GPIO_PUPDR_PUPD0_Pos)         /*!< 0x00000002 */
-#define GPIO_PUPDR_PUPD1_Pos            (2U)  
-#define GPIO_PUPDR_PUPD1_Msk            (0x3UL << GPIO_PUPDR_PUPD1_Pos)         /*!< 0x0000000C */
-#define GPIO_PUPDR_PUPD1                GPIO_PUPDR_PUPD1_Msk                   
-#define GPIO_PUPDR_PUPD1_0              (0x1UL << GPIO_PUPDR_PUPD1_Pos)         /*!< 0x00000004 */
-#define GPIO_PUPDR_PUPD1_1              (0x2UL << GPIO_PUPDR_PUPD1_Pos)         /*!< 0x00000008 */
-#define GPIO_PUPDR_PUPD2_Pos            (4U)  
-#define GPIO_PUPDR_PUPD2_Msk            (0x3UL << GPIO_PUPDR_PUPD2_Pos)         /*!< 0x00000030 */
-#define GPIO_PUPDR_PUPD2                GPIO_PUPDR_PUPD2_Msk                   
-#define GPIO_PUPDR_PUPD2_0              (0x1UL << GPIO_PUPDR_PUPD2_Pos)         /*!< 0x00000010 */
-#define GPIO_PUPDR_PUPD2_1              (0x2UL << GPIO_PUPDR_PUPD2_Pos)         /*!< 0x00000020 */
-#define GPIO_PUPDR_PUPD3_Pos            (6U)  
-#define GPIO_PUPDR_PUPD3_Msk            (0x3UL << GPIO_PUPDR_PUPD3_Pos)         /*!< 0x000000C0 */
-#define GPIO_PUPDR_PUPD3                GPIO_PUPDR_PUPD3_Msk                   
-#define GPIO_PUPDR_PUPD3_0              (0x1UL << GPIO_PUPDR_PUPD3_Pos)         /*!< 0x00000040 */
-#define GPIO_PUPDR_PUPD3_1              (0x2UL << GPIO_PUPDR_PUPD3_Pos)         /*!< 0x00000080 */
-#define GPIO_PUPDR_PUPD4_Pos            (8U)  
-#define GPIO_PUPDR_PUPD4_Msk            (0x3UL << GPIO_PUPDR_PUPD4_Pos)         /*!< 0x00000300 */
-#define GPIO_PUPDR_PUPD4                GPIO_PUPDR_PUPD4_Msk                   
-#define GPIO_PUPDR_PUPD4_0              (0x1UL << GPIO_PUPDR_PUPD4_Pos)         /*!< 0x00000100 */
-#define GPIO_PUPDR_PUPD4_1              (0x2UL << GPIO_PUPDR_PUPD4_Pos)         /*!< 0x00000200 */
-#define GPIO_PUPDR_PUPD5_Pos            (10U) 
-#define GPIO_PUPDR_PUPD5_Msk            (0x3UL << GPIO_PUPDR_PUPD5_Pos)         /*!< 0x00000C00 */
-#define GPIO_PUPDR_PUPD5                GPIO_PUPDR_PUPD5_Msk                   
-#define GPIO_PUPDR_PUPD5_0              (0x1UL << GPIO_PUPDR_PUPD5_Pos)         /*!< 0x00000400 */
-#define GPIO_PUPDR_PUPD5_1              (0x2UL << GPIO_PUPDR_PUPD5_Pos)         /*!< 0x00000800 */
-#define GPIO_PUPDR_PUPD6_Pos            (12U) 
-#define GPIO_PUPDR_PUPD6_Msk            (0x3UL << GPIO_PUPDR_PUPD6_Pos)         /*!< 0x00003000 */
-#define GPIO_PUPDR_PUPD6                GPIO_PUPDR_PUPD6_Msk                   
-#define GPIO_PUPDR_PUPD6_0              (0x1UL << GPIO_PUPDR_PUPD6_Pos)         /*!< 0x00001000 */
-#define GPIO_PUPDR_PUPD6_1              (0x2UL << GPIO_PUPDR_PUPD6_Pos)         /*!< 0x00002000 */
-#define GPIO_PUPDR_PUPD7_Pos            (14U) 
-#define GPIO_PUPDR_PUPD7_Msk            (0x3UL << GPIO_PUPDR_PUPD7_Pos)         /*!< 0x0000C000 */
-#define GPIO_PUPDR_PUPD7                GPIO_PUPDR_PUPD7_Msk                   
-#define GPIO_PUPDR_PUPD7_0              (0x1UL << GPIO_PUPDR_PUPD7_Pos)         /*!< 0x00004000 */
-#define GPIO_PUPDR_PUPD7_1              (0x2UL << GPIO_PUPDR_PUPD7_Pos)         /*!< 0x00008000 */
-#define GPIO_PUPDR_PUPD8_Pos            (16U) 
-#define GPIO_PUPDR_PUPD8_Msk            (0x3UL << GPIO_PUPDR_PUPD8_Pos)         /*!< 0x00030000 */
-#define GPIO_PUPDR_PUPD8                GPIO_PUPDR_PUPD8_Msk                   
-#define GPIO_PUPDR_PUPD8_0              (0x1UL << GPIO_PUPDR_PUPD8_Pos)         /*!< 0x00010000 */
-#define GPIO_PUPDR_PUPD8_1              (0x2UL << GPIO_PUPDR_PUPD8_Pos)         /*!< 0x00020000 */
-#define GPIO_PUPDR_PUPD9_Pos            (18U) 
-#define GPIO_PUPDR_PUPD9_Msk            (0x3UL << GPIO_PUPDR_PUPD9_Pos)         /*!< 0x000C0000 */
-#define GPIO_PUPDR_PUPD9                GPIO_PUPDR_PUPD9_Msk                   
-#define GPIO_PUPDR_PUPD9_0              (0x1UL << GPIO_PUPDR_PUPD9_Pos)         /*!< 0x00040000 */
-#define GPIO_PUPDR_PUPD9_1              (0x2UL << GPIO_PUPDR_PUPD9_Pos)         /*!< 0x00080000 */
-#define GPIO_PUPDR_PUPD10_Pos           (20U) 
-#define GPIO_PUPDR_PUPD10_Msk           (0x3UL << GPIO_PUPDR_PUPD10_Pos)        /*!< 0x00300000 */
-#define GPIO_PUPDR_PUPD10               GPIO_PUPDR_PUPD10_Msk                  
-#define GPIO_PUPDR_PUPD10_0             (0x1UL << GPIO_PUPDR_PUPD10_Pos)        /*!< 0x00100000 */
-#define GPIO_PUPDR_PUPD10_1             (0x2UL << GPIO_PUPDR_PUPD10_Pos)        /*!< 0x00200000 */
-#define GPIO_PUPDR_PUPD11_Pos           (22U) 
-#define GPIO_PUPDR_PUPD11_Msk           (0x3UL << GPIO_PUPDR_PUPD11_Pos)        /*!< 0x00C00000 */
-#define GPIO_PUPDR_PUPD11               GPIO_PUPDR_PUPD11_Msk                  
-#define GPIO_PUPDR_PUPD11_0             (0x1UL << GPIO_PUPDR_PUPD11_Pos)        /*!< 0x00400000 */
-#define GPIO_PUPDR_PUPD11_1             (0x2UL << GPIO_PUPDR_PUPD11_Pos)        /*!< 0x00800000 */
-#define GPIO_PUPDR_PUPD12_Pos           (24U) 
-#define GPIO_PUPDR_PUPD12_Msk           (0x3UL << GPIO_PUPDR_PUPD12_Pos)        /*!< 0x03000000 */
-#define GPIO_PUPDR_PUPD12               GPIO_PUPDR_PUPD12_Msk                  
-#define GPIO_PUPDR_PUPD12_0             (0x1UL << GPIO_PUPDR_PUPD12_Pos)        /*!< 0x01000000 */
-#define GPIO_PUPDR_PUPD12_1             (0x2UL << GPIO_PUPDR_PUPD12_Pos)        /*!< 0x02000000 */
-#define GPIO_PUPDR_PUPD13_Pos           (26U) 
-#define GPIO_PUPDR_PUPD13_Msk           (0x3UL << GPIO_PUPDR_PUPD13_Pos)        /*!< 0x0C000000 */
-#define GPIO_PUPDR_PUPD13               GPIO_PUPDR_PUPD13_Msk                  
-#define GPIO_PUPDR_PUPD13_0             (0x1UL << GPIO_PUPDR_PUPD13_Pos)        /*!< 0x04000000 */
-#define GPIO_PUPDR_PUPD13_1             (0x2UL << GPIO_PUPDR_PUPD13_Pos)        /*!< 0x08000000 */
-#define GPIO_PUPDR_PUPD14_Pos           (28U) 
-#define GPIO_PUPDR_PUPD14_Msk           (0x3UL << GPIO_PUPDR_PUPD14_Pos)        /*!< 0x30000000 */
-#define GPIO_PUPDR_PUPD14               GPIO_PUPDR_PUPD14_Msk                  
-#define GPIO_PUPDR_PUPD14_0             (0x1UL << GPIO_PUPDR_PUPD14_Pos)        /*!< 0x10000000 */
-#define GPIO_PUPDR_PUPD14_1             (0x2UL << GPIO_PUPDR_PUPD14_Pos)        /*!< 0x20000000 */
-#define GPIO_PUPDR_PUPD15_Pos           (30U) 
-#define GPIO_PUPDR_PUPD15_Msk           (0x3UL << GPIO_PUPDR_PUPD15_Pos)        /*!< 0xC0000000 */
-#define GPIO_PUPDR_PUPD15               GPIO_PUPDR_PUPD15_Msk                  
-#define GPIO_PUPDR_PUPD15_0             (0x1UL << GPIO_PUPDR_PUPD15_Pos)        /*!< 0x40000000 */
-#define GPIO_PUPDR_PUPD15_1             (0x2UL << GPIO_PUPDR_PUPD15_Pos)        /*!< 0x80000000 */
-
-/*******************  Bit definition for GPIO_IDR register  *******************/
-#define GPIO_IDR_ID0_Pos                (0U)  
-#define GPIO_IDR_ID0_Msk                (0x1UL << GPIO_IDR_ID0_Pos)             /*!< 0x00000001 */
-#define GPIO_IDR_ID0                    GPIO_IDR_ID0_Msk                       
-#define GPIO_IDR_ID1_Pos                (1U)  
-#define GPIO_IDR_ID1_Msk                (0x1UL << GPIO_IDR_ID1_Pos)             /*!< 0x00000002 */
-#define GPIO_IDR_ID1                    GPIO_IDR_ID1_Msk                       
-#define GPIO_IDR_ID2_Pos                (2U)  
-#define GPIO_IDR_ID2_Msk                (0x1UL << GPIO_IDR_ID2_Pos)             /*!< 0x00000004 */
-#define GPIO_IDR_ID2                    GPIO_IDR_ID2_Msk                       
-#define GPIO_IDR_ID3_Pos                (3U)  
-#define GPIO_IDR_ID3_Msk                (0x1UL << GPIO_IDR_ID3_Pos)             /*!< 0x00000008 */
-#define GPIO_IDR_ID3                    GPIO_IDR_ID3_Msk                       
-#define GPIO_IDR_ID4_Pos                (4U)  
-#define GPIO_IDR_ID4_Msk                (0x1UL << GPIO_IDR_ID4_Pos)             /*!< 0x00000010 */
-#define GPIO_IDR_ID4                    GPIO_IDR_ID4_Msk                       
-#define GPIO_IDR_ID5_Pos                (5U)  
-#define GPIO_IDR_ID5_Msk                (0x1UL << GPIO_IDR_ID5_Pos)             /*!< 0x00000020 */
-#define GPIO_IDR_ID5                    GPIO_IDR_ID5_Msk                       
-#define GPIO_IDR_ID6_Pos                (6U)  
-#define GPIO_IDR_ID6_Msk                (0x1UL << GPIO_IDR_ID6_Pos)             /*!< 0x00000040 */
-#define GPIO_IDR_ID6                    GPIO_IDR_ID6_Msk                       
-#define GPIO_IDR_ID7_Pos                (7U)  
-#define GPIO_IDR_ID7_Msk                (0x1UL << GPIO_IDR_ID7_Pos)             /*!< 0x00000080 */
-#define GPIO_IDR_ID7                    GPIO_IDR_ID7_Msk                       
-#define GPIO_IDR_ID8_Pos                (8U)  
-#define GPIO_IDR_ID8_Msk                (0x1UL << GPIO_IDR_ID8_Pos)             /*!< 0x00000100 */
-#define GPIO_IDR_ID8                    GPIO_IDR_ID8_Msk                       
-#define GPIO_IDR_ID9_Pos                (9U)  
-#define GPIO_IDR_ID9_Msk                (0x1UL << GPIO_IDR_ID9_Pos)             /*!< 0x00000200 */
-#define GPIO_IDR_ID9                    GPIO_IDR_ID9_Msk                       
-#define GPIO_IDR_ID10_Pos               (10U) 
-#define GPIO_IDR_ID10_Msk               (0x1UL << GPIO_IDR_ID10_Pos)            /*!< 0x00000400 */
-#define GPIO_IDR_ID10                   GPIO_IDR_ID10_Msk                      
-#define GPIO_IDR_ID11_Pos               (11U) 
-#define GPIO_IDR_ID11_Msk               (0x1UL << GPIO_IDR_ID11_Pos)            /*!< 0x00000800 */
-#define GPIO_IDR_ID11                   GPIO_IDR_ID11_Msk                      
-#define GPIO_IDR_ID12_Pos               (12U) 
-#define GPIO_IDR_ID12_Msk               (0x1UL << GPIO_IDR_ID12_Pos)            /*!< 0x00001000 */
-#define GPIO_IDR_ID12                   GPIO_IDR_ID12_Msk                      
-#define GPIO_IDR_ID13_Pos               (13U) 
-#define GPIO_IDR_ID13_Msk               (0x1UL << GPIO_IDR_ID13_Pos)            /*!< 0x00002000 */
-#define GPIO_IDR_ID13                   GPIO_IDR_ID13_Msk                      
-#define GPIO_IDR_ID14_Pos               (14U) 
-#define GPIO_IDR_ID14_Msk               (0x1UL << GPIO_IDR_ID14_Pos)            /*!< 0x00004000 */
-#define GPIO_IDR_ID14                   GPIO_IDR_ID14_Msk                      
-#define GPIO_IDR_ID15_Pos               (15U) 
-#define GPIO_IDR_ID15_Msk               (0x1UL << GPIO_IDR_ID15_Pos)            /*!< 0x00008000 */
-#define GPIO_IDR_ID15                   GPIO_IDR_ID15_Msk                      
-
-/******************  Bit definition for GPIO_ODR register  ********************/
-#define GPIO_ODR_OD0_Pos                (0U)  
-#define GPIO_ODR_OD0_Msk                (0x1UL << GPIO_ODR_OD0_Pos)             /*!< 0x00000001 */
-#define GPIO_ODR_OD0                    GPIO_ODR_OD0_Msk                       
-#define GPIO_ODR_OD1_Pos                (1U)  
-#define GPIO_ODR_OD1_Msk                (0x1UL << GPIO_ODR_OD1_Pos)             /*!< 0x00000002 */
-#define GPIO_ODR_OD1                    GPIO_ODR_OD1_Msk                       
-#define GPIO_ODR_OD2_Pos                (2U)  
-#define GPIO_ODR_OD2_Msk                (0x1UL << GPIO_ODR_OD2_Pos)             /*!< 0x00000004 */
-#define GPIO_ODR_OD2                    GPIO_ODR_OD2_Msk                       
-#define GPIO_ODR_OD3_Pos                (3U)  
-#define GPIO_ODR_OD3_Msk                (0x1UL << GPIO_ODR_OD3_Pos)             /*!< 0x00000008 */
-#define GPIO_ODR_OD3                    GPIO_ODR_OD3_Msk                       
-#define GPIO_ODR_OD4_Pos                (4U)  
-#define GPIO_ODR_OD4_Msk                (0x1UL << GPIO_ODR_OD4_Pos)             /*!< 0x00000010 */
-#define GPIO_ODR_OD4                    GPIO_ODR_OD4_Msk                       
-#define GPIO_ODR_OD5_Pos                (5U)  
-#define GPIO_ODR_OD5_Msk                (0x1UL << GPIO_ODR_OD5_Pos)             /*!< 0x00000020 */
-#define GPIO_ODR_OD5                    GPIO_ODR_OD5_Msk                       
-#define GPIO_ODR_OD6_Pos                (6U)  
-#define GPIO_ODR_OD6_Msk                (0x1UL << GPIO_ODR_OD6_Pos)             /*!< 0x00000040 */
-#define GPIO_ODR_OD6                    GPIO_ODR_OD6_Msk                       
-#define GPIO_ODR_OD7_Pos                (7U)  
-#define GPIO_ODR_OD7_Msk                (0x1UL << GPIO_ODR_OD7_Pos)             /*!< 0x00000080 */
-#define GPIO_ODR_OD7                    GPIO_ODR_OD7_Msk                       
-#define GPIO_ODR_OD8_Pos                (8U)  
-#define GPIO_ODR_OD8_Msk                (0x1UL << GPIO_ODR_OD8_Pos)             /*!< 0x00000100 */
-#define GPIO_ODR_OD8                    GPIO_ODR_OD8_Msk                       
-#define GPIO_ODR_OD9_Pos                (9U)  
-#define GPIO_ODR_OD9_Msk                (0x1UL << GPIO_ODR_OD9_Pos)             /*!< 0x00000200 */
-#define GPIO_ODR_OD9                    GPIO_ODR_OD9_Msk                       
-#define GPIO_ODR_OD10_Pos               (10U) 
-#define GPIO_ODR_OD10_Msk               (0x1UL << GPIO_ODR_OD10_Pos)            /*!< 0x00000400 */
-#define GPIO_ODR_OD10                   GPIO_ODR_OD10_Msk                      
-#define GPIO_ODR_OD11_Pos               (11U) 
-#define GPIO_ODR_OD11_Msk               (0x1UL << GPIO_ODR_OD11_Pos)            /*!< 0x00000800 */
-#define GPIO_ODR_OD11                   GPIO_ODR_OD11_Msk                      
-#define GPIO_ODR_OD12_Pos               (12U) 
-#define GPIO_ODR_OD12_Msk               (0x1UL << GPIO_ODR_OD12_Pos)            /*!< 0x00001000 */
-#define GPIO_ODR_OD12                   GPIO_ODR_OD12_Msk                      
-#define GPIO_ODR_OD13_Pos               (13U) 
-#define GPIO_ODR_OD13_Msk               (0x1UL << GPIO_ODR_OD13_Pos)            /*!< 0x00002000 */
-#define GPIO_ODR_OD13                   GPIO_ODR_OD13_Msk                      
-#define GPIO_ODR_OD14_Pos               (14U) 
-#define GPIO_ODR_OD14_Msk               (0x1UL << GPIO_ODR_OD14_Pos)            /*!< 0x00004000 */
-#define GPIO_ODR_OD14                   GPIO_ODR_OD14_Msk                      
-#define GPIO_ODR_OD15_Pos               (15U) 
-#define GPIO_ODR_OD15_Msk               (0x1UL << GPIO_ODR_OD15_Pos)            /*!< 0x00008000 */
-#define GPIO_ODR_OD15                   GPIO_ODR_OD15_Msk                      
-
-/****************** Bit definition for GPIO_BSRR register  ********************/
-#define GPIO_BSRR_BS_0                  (0x00000001U)                          
-#define GPIO_BSRR_BS_1                  (0x00000002U)                          
-#define GPIO_BSRR_BS_2                  (0x00000004U)                          
-#define GPIO_BSRR_BS_3                  (0x00000008U)                          
-#define GPIO_BSRR_BS_4                  (0x00000010U)                          
-#define GPIO_BSRR_BS_5                  (0x00000020U)                          
-#define GPIO_BSRR_BS_6                  (0x00000040U)                          
-#define GPIO_BSRR_BS_7                  (0x00000080U)                          
-#define GPIO_BSRR_BS_8                  (0x00000100U)                          
-#define GPIO_BSRR_BS_9                  (0x00000200U)                          
-#define GPIO_BSRR_BS_10                 (0x00000400U)                          
-#define GPIO_BSRR_BS_11                 (0x00000800U)                          
-#define GPIO_BSRR_BS_12                 (0x00001000U)                          
-#define GPIO_BSRR_BS_13                 (0x00002000U)                          
-#define GPIO_BSRR_BS_14                 (0x00004000U)                          
-#define GPIO_BSRR_BS_15                 (0x00008000U)                          
-#define GPIO_BSRR_BR_0                  (0x00010000U)                          
-#define GPIO_BSRR_BR_1                  (0x00020000U)                          
-#define GPIO_BSRR_BR_2                  (0x00040000U)                          
-#define GPIO_BSRR_BR_3                  (0x00080000U)                          
-#define GPIO_BSRR_BR_4                  (0x00100000U)                          
-#define GPIO_BSRR_BR_5                  (0x00200000U)                          
-#define GPIO_BSRR_BR_6                  (0x00400000U)                          
-#define GPIO_BSRR_BR_7                  (0x00800000U)                          
-#define GPIO_BSRR_BR_8                  (0x01000000U)                          
-#define GPIO_BSRR_BR_9                  (0x02000000U)                          
-#define GPIO_BSRR_BR_10                 (0x04000000U)                          
-#define GPIO_BSRR_BR_11                 (0x08000000U)                          
-#define GPIO_BSRR_BR_12                 (0x10000000U)                          
-#define GPIO_BSRR_BR_13                 (0x20000000U)                          
-#define GPIO_BSRR_BR_14                 (0x40000000U)                          
-#define GPIO_BSRR_BR_15                 (0x80000000U)                          
-
-/****************** Bit definition for GPIO_LCKR register  ********************/
-#define GPIO_LCKR_LCK0_Pos              (0U)  
-#define GPIO_LCKR_LCK0_Msk              (0x1UL << GPIO_LCKR_LCK0_Pos)           /*!< 0x00000001 */
-#define GPIO_LCKR_LCK0                  GPIO_LCKR_LCK0_Msk                     
-#define GPIO_LCKR_LCK1_Pos              (1U)  
-#define GPIO_LCKR_LCK1_Msk              (0x1UL << GPIO_LCKR_LCK1_Pos)           /*!< 0x00000002 */
-#define GPIO_LCKR_LCK1                  GPIO_LCKR_LCK1_Msk                     
-#define GPIO_LCKR_LCK2_Pos              (2U)  
-#define GPIO_LCKR_LCK2_Msk              (0x1UL << GPIO_LCKR_LCK2_Pos)           /*!< 0x00000004 */
-#define GPIO_LCKR_LCK2                  GPIO_LCKR_LCK2_Msk                     
-#define GPIO_LCKR_LCK3_Pos              (3U)  
-#define GPIO_LCKR_LCK3_Msk              (0x1UL << GPIO_LCKR_LCK3_Pos)           /*!< 0x00000008 */
-#define GPIO_LCKR_LCK3                  GPIO_LCKR_LCK3_Msk                     
-#define GPIO_LCKR_LCK4_Pos              (4U)  
-#define GPIO_LCKR_LCK4_Msk              (0x1UL << GPIO_LCKR_LCK4_Pos)           /*!< 0x00000010 */
-#define GPIO_LCKR_LCK4                  GPIO_LCKR_LCK4_Msk                     
-#define GPIO_LCKR_LCK5_Pos              (5U)  
-#define GPIO_LCKR_LCK5_Msk              (0x1UL << GPIO_LCKR_LCK5_Pos)           /*!< 0x00000020 */
-#define GPIO_LCKR_LCK5                  GPIO_LCKR_LCK5_Msk                     
-#define GPIO_LCKR_LCK6_Pos              (6U)  
-#define GPIO_LCKR_LCK6_Msk              (0x1UL << GPIO_LCKR_LCK6_Pos)           /*!< 0x00000040 */
-#define GPIO_LCKR_LCK6                  GPIO_LCKR_LCK6_Msk                     
-#define GPIO_LCKR_LCK7_Pos              (7U)  
-#define GPIO_LCKR_LCK7_Msk              (0x1UL << GPIO_LCKR_LCK7_Pos)           /*!< 0x00000080 */
-#define GPIO_LCKR_LCK7                  GPIO_LCKR_LCK7_Msk                     
-#define GPIO_LCKR_LCK8_Pos              (8U)  
-#define GPIO_LCKR_LCK8_Msk              (0x1UL << GPIO_LCKR_LCK8_Pos)           /*!< 0x00000100 */
-#define GPIO_LCKR_LCK8                  GPIO_LCKR_LCK8_Msk                     
-#define GPIO_LCKR_LCK9_Pos              (9U)  
-#define GPIO_LCKR_LCK9_Msk              (0x1UL << GPIO_LCKR_LCK9_Pos)           /*!< 0x00000200 */
-#define GPIO_LCKR_LCK9                  GPIO_LCKR_LCK9_Msk                     
-#define GPIO_LCKR_LCK10_Pos             (10U) 
-#define GPIO_LCKR_LCK10_Msk             (0x1UL << GPIO_LCKR_LCK10_Pos)          /*!< 0x00000400 */
-#define GPIO_LCKR_LCK10                 GPIO_LCKR_LCK10_Msk                    
-#define GPIO_LCKR_LCK11_Pos             (11U) 
-#define GPIO_LCKR_LCK11_Msk             (0x1UL << GPIO_LCKR_LCK11_Pos)          /*!< 0x00000800 */
-#define GPIO_LCKR_LCK11                 GPIO_LCKR_LCK11_Msk                    
-#define GPIO_LCKR_LCK12_Pos             (12U) 
-#define GPIO_LCKR_LCK12_Msk             (0x1UL << GPIO_LCKR_LCK12_Pos)          /*!< 0x00001000 */
-#define GPIO_LCKR_LCK12                 GPIO_LCKR_LCK12_Msk                    
-#define GPIO_LCKR_LCK13_Pos             (13U) 
-#define GPIO_LCKR_LCK13_Msk             (0x1UL << GPIO_LCKR_LCK13_Pos)          /*!< 0x00002000 */
-#define GPIO_LCKR_LCK13                 GPIO_LCKR_LCK13_Msk                    
-#define GPIO_LCKR_LCK14_Pos             (14U) 
-#define GPIO_LCKR_LCK14_Msk             (0x1UL << GPIO_LCKR_LCK14_Pos)          /*!< 0x00004000 */
-#define GPIO_LCKR_LCK14                 GPIO_LCKR_LCK14_Msk                    
-#define GPIO_LCKR_LCK15_Pos             (15U) 
-#define GPIO_LCKR_LCK15_Msk             (0x1UL << GPIO_LCKR_LCK15_Pos)          /*!< 0x00008000 */
-#define GPIO_LCKR_LCK15                 GPIO_LCKR_LCK15_Msk                    
-#define GPIO_LCKR_LCKK_Pos              (16U) 
-#define GPIO_LCKR_LCKK_Msk              (0x1UL << GPIO_LCKR_LCKK_Pos)           /*!< 0x00010000 */
-#define GPIO_LCKR_LCKK                  GPIO_LCKR_LCKK_Msk                     
-
-/****************** Bit definition for GPIO_AFRL register ********************/
-#define GPIO_AFRL_AFSEL0_Pos             (0U)  
-#define GPIO_AFRL_AFSEL0_Msk             (0xFUL << GPIO_AFRL_AFSEL0_Pos)          /*!< 0x0000000F */
-#define GPIO_AFRL_AFSEL0                 GPIO_AFRL_AFSEL0_Msk                    
-#define GPIO_AFRL_AFSEL1_Pos             (4U)  
-#define GPIO_AFRL_AFSEL1_Msk             (0xFUL << GPIO_AFRL_AFSEL1_Pos)          /*!< 0x000000F0 */
-#define GPIO_AFRL_AFSEL1                 GPIO_AFRL_AFSEL1_Msk                    
-#define GPIO_AFRL_AFSEL2_Pos             (8U)  
-#define GPIO_AFRL_AFSEL2_Msk             (0xFUL << GPIO_AFRL_AFSEL2_Pos)          /*!< 0x00000F00 */
-#define GPIO_AFRL_AFSEL2                 GPIO_AFRL_AFSEL2_Msk                    
-#define GPIO_AFRL_AFSEL3_Pos             (12U) 
-#define GPIO_AFRL_AFSEL3_Msk             (0xFUL << GPIO_AFRL_AFSEL3_Pos)          /*!< 0x0000F000 */
-#define GPIO_AFRL_AFSEL3                 GPIO_AFRL_AFSEL3_Msk                    
-#define GPIO_AFRL_AFSEL4_Pos             (16U) 
-#define GPIO_AFRL_AFSEL4_Msk             (0xFUL << GPIO_AFRL_AFSEL4_Pos)          /*!< 0x000F0000 */
-#define GPIO_AFRL_AFSEL4                 GPIO_AFRL_AFSEL4_Msk                    
-#define GPIO_AFRL_AFSEL5_Pos             (20U) 
-#define GPIO_AFRL_AFSEL5_Msk             (0xFUL << GPIO_AFRL_AFSEL5_Pos)          /*!< 0x00F00000 */
-#define GPIO_AFRL_AFSEL5                 GPIO_AFRL_AFSEL5_Msk                    
-#define GPIO_AFRL_AFSEL6_Pos             (24U) 
-#define GPIO_AFRL_AFSEL6_Msk             (0xFUL << GPIO_AFRL_AFSEL6_Pos)          /*!< 0x0F000000 */
-#define GPIO_AFRL_AFSEL6                 GPIO_AFRL_AFSEL6_Msk                    
-#define GPIO_AFRL_AFSEL7_Pos             (28U) 
-#define GPIO_AFRL_AFSEL7_Msk             (0xFUL << GPIO_AFRL_AFSEL7_Pos)          /*!< 0xF0000000 */
-#define GPIO_AFRL_AFSEL7                 GPIO_AFRL_AFSEL7_Msk                    
-
-/****************** Bit definition for GPIO_AFRH register ********************/
-#define GPIO_AFRH_AFSEL8_Pos             (0U)  
-#define GPIO_AFRH_AFSEL8_Msk             (0xFUL << GPIO_AFRH_AFSEL8_Pos)          /*!< 0x0000000F */
-#define GPIO_AFRH_AFSEL8                 GPIO_AFRH_AFSEL8_Msk                    
-#define GPIO_AFRH_AFSEL9_Pos             (4U)  
-#define GPIO_AFRH_AFSEL9_Msk             (0xFUL << GPIO_AFRH_AFSEL9_Pos)          /*!< 0x000000F0 */
-#define GPIO_AFRH_AFSEL9                 GPIO_AFRH_AFSEL9_Msk                    
-#define GPIO_AFRH_AFSEL10_Pos             (8U)  
-#define GPIO_AFRH_AFSEL10_Msk             (0xFUL << GPIO_AFRH_AFSEL10_Pos)          /*!< 0x00000F00 */
-#define GPIO_AFRH_AFSEL10                 GPIO_AFRH_AFSEL10_Msk                    
-#define GPIO_AFRH_AFSEL11_Pos             (12U) 
-#define GPIO_AFRH_AFSEL11_Msk             (0xFUL << GPIO_AFRH_AFSEL11_Pos)          /*!< 0x0000F000 */
-#define GPIO_AFRH_AFSEL11                 GPIO_AFRH_AFSEL11_Msk                    
-#define GPIO_AFRH_AFSEL12_Pos             (16U) 
-#define GPIO_AFRH_AFSEL12_Msk             (0xFUL << GPIO_AFRH_AFSEL12_Pos)          /*!< 0x000F0000 */
-#define GPIO_AFRH_AFSEL12                 GPIO_AFRH_AFSEL12_Msk                    
-#define GPIO_AFRH_AFSEL13_Pos             (20U) 
-#define GPIO_AFRH_AFSEL13_Msk             (0xFUL << GPIO_AFRH_AFSEL13_Pos)          /*!< 0x00F00000 */
-#define GPIO_AFRH_AFSEL13                 GPIO_AFRH_AFSEL13_Msk                    
-#define GPIO_AFRH_AFSEL14_Pos             (24U) 
-#define GPIO_AFRH_AFSEL14_Msk             (0xFUL << GPIO_AFRH_AFSEL14_Pos)          /*!< 0x0F000000 */
-#define GPIO_AFRH_AFSEL14                 GPIO_AFRH_AFSEL14_Msk                    
-#define GPIO_AFRH_AFSEL15_Pos             (28U) 
-#define GPIO_AFRH_AFSEL15_Msk             (0xFUL << GPIO_AFRH_AFSEL15_Pos)          /*!< 0xF0000000 */
-#define GPIO_AFRH_AFSEL15                 GPIO_AFRH_AFSEL15_Msk                    
-
-/****************** Bit definition for GPIO_BRR register  *********************/
-#define GPIO_BRR_BR_0                   (0x00000001U)                          
-#define GPIO_BRR_BR_1                   (0x00000002U)                          
-#define GPIO_BRR_BR_2                   (0x00000004U)                          
-#define GPIO_BRR_BR_3                   (0x00000008U)                          
-#define GPIO_BRR_BR_4                   (0x00000010U)                          
-#define GPIO_BRR_BR_5                   (0x00000020U)                          
-#define GPIO_BRR_BR_6                   (0x00000040U)                          
-#define GPIO_BRR_BR_7                   (0x00000080U)                          
-#define GPIO_BRR_BR_8                   (0x00000100U)                          
-#define GPIO_BRR_BR_9                   (0x00000200U)                          
-#define GPIO_BRR_BR_10                  (0x00000400U)                          
-#define GPIO_BRR_BR_11                  (0x00000800U)                          
-#define GPIO_BRR_BR_12                  (0x00001000U)                          
-#define GPIO_BRR_BR_13                  (0x00002000U)                          
-#define GPIO_BRR_BR_14                  (0x00004000U)                          
-#define GPIO_BRR_BR_15                  (0x00008000U)                          
-
-/******************************************************************************/
-/*                                                                            */
-/*                   Inter-integrated Circuit Interface (I2C)                 */
-/*                                                                            */
-/******************************************************************************/
-
-/*******************  Bit definition for I2C_CR1 register  *******************/
-#define I2C_CR1_PE_Pos               (0U)     
-#define I2C_CR1_PE_Msk               (0x1UL << I2C_CR1_PE_Pos)                  /*!< 0x00000001 */
-#define I2C_CR1_PE                   I2C_CR1_PE_Msk                            /*!< Peripheral enable */
-#define I2C_CR1_TXIE_Pos             (1U)     
-#define I2C_CR1_TXIE_Msk             (0x1UL << I2C_CR1_TXIE_Pos)                /*!< 0x00000002 */
-#define I2C_CR1_TXIE                 I2C_CR1_TXIE_Msk                          /*!< TX interrupt enable */
-#define I2C_CR1_RXIE_Pos             (2U)     
-#define I2C_CR1_RXIE_Msk             (0x1UL << I2C_CR1_RXIE_Pos)                /*!< 0x00000004 */
-#define I2C_CR1_RXIE                 I2C_CR1_RXIE_Msk                          /*!< RX interrupt enable */
-#define I2C_CR1_ADDRIE_Pos           (3U)     
-#define I2C_CR1_ADDRIE_Msk           (0x1UL << I2C_CR1_ADDRIE_Pos)              /*!< 0x00000008 */
-#define I2C_CR1_ADDRIE               I2C_CR1_ADDRIE_Msk                        /*!< Address match interrupt enable */
-#define I2C_CR1_NACKIE_Pos           (4U)     
-#define I2C_CR1_NACKIE_Msk           (0x1UL << I2C_CR1_NACKIE_Pos)              /*!< 0x00000010 */
-#define I2C_CR1_NACKIE               I2C_CR1_NACKIE_Msk                        /*!< NACK received interrupt enable */
-#define I2C_CR1_STOPIE_Pos           (5U)     
-#define I2C_CR1_STOPIE_Msk           (0x1UL << I2C_CR1_STOPIE_Pos)              /*!< 0x00000020 */
-#define I2C_CR1_STOPIE               I2C_CR1_STOPIE_Msk                        /*!< STOP detection interrupt enable */
-#define I2C_CR1_TCIE_Pos             (6U)     
-#define I2C_CR1_TCIE_Msk             (0x1UL << I2C_CR1_TCIE_Pos)                /*!< 0x00000040 */
-#define I2C_CR1_TCIE                 I2C_CR1_TCIE_Msk                          /*!< Transfer complete interrupt enable */
-#define I2C_CR1_ERRIE_Pos            (7U)     
-#define I2C_CR1_ERRIE_Msk            (0x1UL << I2C_CR1_ERRIE_Pos)               /*!< 0x00000080 */
-#define I2C_CR1_ERRIE                I2C_CR1_ERRIE_Msk                         /*!< Errors interrupt enable */
-#define I2C_CR1_DNF_Pos              (8U)     
-#define I2C_CR1_DNF_Msk              (0xFUL << I2C_CR1_DNF_Pos)                 /*!< 0x00000F00 */
-#define I2C_CR1_DNF                  I2C_CR1_DNF_Msk                           /*!< Digital noise filter */
-#define I2C_CR1_ANFOFF_Pos           (12U)    
-#define I2C_CR1_ANFOFF_Msk           (0x1UL << I2C_CR1_ANFOFF_Pos)              /*!< 0x00001000 */
-#define I2C_CR1_ANFOFF               I2C_CR1_ANFOFF_Msk                        /*!< Analog noise filter OFF */
-#define I2C_CR1_TXDMAEN_Pos          (14U)    
-#define I2C_CR1_TXDMAEN_Msk          (0x1UL << I2C_CR1_TXDMAEN_Pos)             /*!< 0x00004000 */
-#define I2C_CR1_TXDMAEN              I2C_CR1_TXDMAEN_Msk                       /*!< DMA transmission requests enable */
-#define I2C_CR1_RXDMAEN_Pos          (15U)    
-#define I2C_CR1_RXDMAEN_Msk          (0x1UL << I2C_CR1_RXDMAEN_Pos)             /*!< 0x00008000 */
-#define I2C_CR1_RXDMAEN              I2C_CR1_RXDMAEN_Msk                       /*!< DMA reception requests enable */
-#define I2C_CR1_SBC_Pos              (16U)    
-#define I2C_CR1_SBC_Msk              (0x1UL << I2C_CR1_SBC_Pos)                 /*!< 0x00010000 */
-#define I2C_CR1_SBC                  I2C_CR1_SBC_Msk                           /*!< Slave byte control */
-#define I2C_CR1_NOSTRETCH_Pos        (17U)    
-#define I2C_CR1_NOSTRETCH_Msk        (0x1UL << I2C_CR1_NOSTRETCH_Pos)           /*!< 0x00020000 */
-#define I2C_CR1_NOSTRETCH            I2C_CR1_NOSTRETCH_Msk                     /*!< Clock stretching disable */
-#define I2C_CR1_WUPEN_Pos            (18U)    
-#define I2C_CR1_WUPEN_Msk            (0x1UL << I2C_CR1_WUPEN_Pos)               /*!< 0x00040000 */
-#define I2C_CR1_WUPEN                I2C_CR1_WUPEN_Msk                         /*!< Wakeup from STOP enable */
-#define I2C_CR1_GCEN_Pos             (19U)    
-#define I2C_CR1_GCEN_Msk             (0x1UL << I2C_CR1_GCEN_Pos)                /*!< 0x00080000 */
-#define I2C_CR1_GCEN                 I2C_CR1_GCEN_Msk                          /*!< General call enable */
-#define I2C_CR1_SMBHEN_Pos           (20U)    
-#define I2C_CR1_SMBHEN_Msk           (0x1UL << I2C_CR1_SMBHEN_Pos)              /*!< 0x00100000 */
-#define I2C_CR1_SMBHEN               I2C_CR1_SMBHEN_Msk                        /*!< SMBus host address enable */
-#define I2C_CR1_SMBDEN_Pos           (21U)    
-#define I2C_CR1_SMBDEN_Msk           (0x1UL << I2C_CR1_SMBDEN_Pos)              /*!< 0x00200000 */
-#define I2C_CR1_SMBDEN               I2C_CR1_SMBDEN_Msk                        /*!< SMBus device default address enable */
-#define I2C_CR1_ALERTEN_Pos          (22U)    
-#define I2C_CR1_ALERTEN_Msk          (0x1UL << I2C_CR1_ALERTEN_Pos)             /*!< 0x00400000 */
-#define I2C_CR1_ALERTEN              I2C_CR1_ALERTEN_Msk                       /*!< SMBus alert enable */
-#define I2C_CR1_PECEN_Pos            (23U)    
-#define I2C_CR1_PECEN_Msk            (0x1UL << I2C_CR1_PECEN_Pos)               /*!< 0x00800000 */
-#define I2C_CR1_PECEN                I2C_CR1_PECEN_Msk                         /*!< PEC enable */
-
-/******************  Bit definition for I2C_CR2 register  ********************/
-#define I2C_CR2_SADD_Pos             (0U)     
-#define I2C_CR2_SADD_Msk             (0x3FFUL << I2C_CR2_SADD_Pos)              /*!< 0x000003FF */
-#define I2C_CR2_SADD                 I2C_CR2_SADD_Msk                          /*!< Slave address (master mode) */
-#define I2C_CR2_RD_WRN_Pos           (10U)    
-#define I2C_CR2_RD_WRN_Msk           (0x1UL << I2C_CR2_RD_WRN_Pos)              /*!< 0x00000400 */
-#define I2C_CR2_RD_WRN               I2C_CR2_RD_WRN_Msk                        /*!< Transfer direction (master mode) */
-#define I2C_CR2_ADD10_Pos            (11U)    
-#define I2C_CR2_ADD10_Msk            (0x1UL << I2C_CR2_ADD10_Pos)               /*!< 0x00000800 */
-#define I2C_CR2_ADD10                I2C_CR2_ADD10_Msk                         /*!< 10-bit addressing mode (master mode) */
-#define I2C_CR2_HEAD10R_Pos          (12U)    
-#define I2C_CR2_HEAD10R_Msk          (0x1UL << I2C_CR2_HEAD10R_Pos)             /*!< 0x00001000 */
-#define I2C_CR2_HEAD10R              I2C_CR2_HEAD10R_Msk                       /*!< 10-bit address header only read direction (master mode) */
-#define I2C_CR2_START_Pos            (13U)    
-#define I2C_CR2_START_Msk            (0x1UL << I2C_CR2_START_Pos)               /*!< 0x00002000 */
-#define I2C_CR2_START                I2C_CR2_START_Msk                         /*!< START generation */
-#define I2C_CR2_STOP_Pos             (14U)    
-#define I2C_CR2_STOP_Msk             (0x1UL << I2C_CR2_STOP_Pos)                /*!< 0x00004000 */
-#define I2C_CR2_STOP                 I2C_CR2_STOP_Msk                          /*!< STOP generation (master mode) */
-#define I2C_CR2_NACK_Pos             (15U)    
-#define I2C_CR2_NACK_Msk             (0x1UL << I2C_CR2_NACK_Pos)                /*!< 0x00008000 */
-#define I2C_CR2_NACK                 I2C_CR2_NACK_Msk                          /*!< NACK generation (slave mode) */
-#define I2C_CR2_NBYTES_Pos           (16U)    
-#define I2C_CR2_NBYTES_Msk           (0xFFUL << I2C_CR2_NBYTES_Pos)             /*!< 0x00FF0000 */
-#define I2C_CR2_NBYTES               I2C_CR2_NBYTES_Msk                        /*!< Number of bytes */
-#define I2C_CR2_RELOAD_Pos           (24U)    
-#define I2C_CR2_RELOAD_Msk           (0x1UL << I2C_CR2_RELOAD_Pos)              /*!< 0x01000000 */
-#define I2C_CR2_RELOAD               I2C_CR2_RELOAD_Msk                        /*!< NBYTES reload mode */
-#define I2C_CR2_AUTOEND_Pos          (25U)    
-#define I2C_CR2_AUTOEND_Msk          (0x1UL << I2C_CR2_AUTOEND_Pos)             /*!< 0x02000000 */
-#define I2C_CR2_AUTOEND              I2C_CR2_AUTOEND_Msk                       /*!< Automatic end mode (master mode) */
-#define I2C_CR2_PECBYTE_Pos          (26U)    
-#define I2C_CR2_PECBYTE_Msk          (0x1UL << I2C_CR2_PECBYTE_Pos)             /*!< 0x04000000 */
-#define I2C_CR2_PECBYTE              I2C_CR2_PECBYTE_Msk                       /*!< Packet error checking byte */
-
-/*******************  Bit definition for I2C_OAR1 register  ******************/
-#define I2C_OAR1_OA1_Pos             (0U)     
-#define I2C_OAR1_OA1_Msk             (0x3FFUL << I2C_OAR1_OA1_Pos)              /*!< 0x000003FF */
-#define I2C_OAR1_OA1                 I2C_OAR1_OA1_Msk                          /*!< Interface own address 1 */
-#define I2C_OAR1_OA1MODE_Pos         (10U)    
-#define I2C_OAR1_OA1MODE_Msk         (0x1UL << I2C_OAR1_OA1MODE_Pos)            /*!< 0x00000400 */
-#define I2C_OAR1_OA1MODE             I2C_OAR1_OA1MODE_Msk                      /*!< Own address 1 10-bit mode */
-#define I2C_OAR1_OA1EN_Pos           (15U)    
-#define I2C_OAR1_OA1EN_Msk           (0x1UL << I2C_OAR1_OA1EN_Pos)              /*!< 0x00008000 */
-#define I2C_OAR1_OA1EN               I2C_OAR1_OA1EN_Msk                        /*!< Own address 1 enable */
-
-/*******************  Bit definition for I2C_OAR2 register  ******************/
-#define I2C_OAR2_OA2_Pos             (1U)     
-#define I2C_OAR2_OA2_Msk             (0x7FUL << I2C_OAR2_OA2_Pos)               /*!< 0x000000FE */
-#define I2C_OAR2_OA2                 I2C_OAR2_OA2_Msk                          /*!< Interface own address 2                        */
-#define I2C_OAR2_OA2MSK_Pos          (8U)     
-#define I2C_OAR2_OA2MSK_Msk          (0x7UL << I2C_OAR2_OA2MSK_Pos)             /*!< 0x00000700 */
-#define I2C_OAR2_OA2MSK              I2C_OAR2_OA2MSK_Msk                       /*!< Own address 2 masks                            */
-#define I2C_OAR2_OA2NOMASK           (0x00000000U)                             /*!< No mask                                        */
-#define I2C_OAR2_OA2MASK01_Pos       (8U)     
-#define I2C_OAR2_OA2MASK01_Msk       (0x1UL << I2C_OAR2_OA2MASK01_Pos)          /*!< 0x00000100 */
-#define I2C_OAR2_OA2MASK01           I2C_OAR2_OA2MASK01_Msk                    /*!< OA2[1] is masked, Only OA2[7:2] are compared   */
-#define I2C_OAR2_OA2MASK02_Pos       (9U)     
-#define I2C_OAR2_OA2MASK02_Msk       (0x1UL << I2C_OAR2_OA2MASK02_Pos)          /*!< 0x00000200 */
-#define I2C_OAR2_OA2MASK02           I2C_OAR2_OA2MASK02_Msk                    /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */
-#define I2C_OAR2_OA2MASK03_Pos       (8U)     
-#define I2C_OAR2_OA2MASK03_Msk       (0x3UL << I2C_OAR2_OA2MASK03_Pos)          /*!< 0x00000300 */
-#define I2C_OAR2_OA2MASK03           I2C_OAR2_OA2MASK03_Msk                    /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */
-#define I2C_OAR2_OA2MASK04_Pos       (10U)    
-#define I2C_OAR2_OA2MASK04_Msk       (0x1UL << I2C_OAR2_OA2MASK04_Pos)          /*!< 0x00000400 */
-#define I2C_OAR2_OA2MASK04           I2C_OAR2_OA2MASK04_Msk                    /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */
-#define I2C_OAR2_OA2MASK05_Pos       (8U)     
-#define I2C_OAR2_OA2MASK05_Msk       (0x5UL << I2C_OAR2_OA2MASK05_Pos)          /*!< 0x00000500 */
-#define I2C_OAR2_OA2MASK05           I2C_OAR2_OA2MASK05_Msk                    /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */
-#define I2C_OAR2_OA2MASK06_Pos       (9U)     
-#define I2C_OAR2_OA2MASK06_Msk       (0x3UL << I2C_OAR2_OA2MASK06_Pos)          /*!< 0x00000600 */
-#define I2C_OAR2_OA2MASK06           I2C_OAR2_OA2MASK06_Msk                    /*!< OA2[6:1] is masked, Only OA2[7] are compared   */
-#define I2C_OAR2_OA2MASK07_Pos       (8U)     
-#define I2C_OAR2_OA2MASK07_Msk       (0x7UL << I2C_OAR2_OA2MASK07_Pos)          /*!< 0x00000700 */
-#define I2C_OAR2_OA2MASK07           I2C_OAR2_OA2MASK07_Msk                    /*!< OA2[7:1] is masked, No comparison is done      */
-#define I2C_OAR2_OA2EN_Pos           (15U)    
-#define I2C_OAR2_OA2EN_Msk           (0x1UL << I2C_OAR2_OA2EN_Pos)              /*!< 0x00008000 */
-#define I2C_OAR2_OA2EN               I2C_OAR2_OA2EN_Msk                        /*!< Own address 2 enable                           */
-
-/*******************  Bit definition for I2C_TIMINGR register *******************/
-#define I2C_TIMINGR_SCLL_Pos         (0U)     
-#define I2C_TIMINGR_SCLL_Msk         (0xFFUL << I2C_TIMINGR_SCLL_Pos)           /*!< 0x000000FF */
-#define I2C_TIMINGR_SCLL             I2C_TIMINGR_SCLL_Msk                      /*!< SCL low period (master mode) */
-#define I2C_TIMINGR_SCLH_Pos         (8U)     
-#define I2C_TIMINGR_SCLH_Msk         (0xFFUL << I2C_TIMINGR_SCLH_Pos)           /*!< 0x0000FF00 */
-#define I2C_TIMINGR_SCLH             I2C_TIMINGR_SCLH_Msk                      /*!< SCL high period (master mode) */
-#define I2C_TIMINGR_SDADEL_Pos       (16U)    
-#define I2C_TIMINGR_SDADEL_Msk       (0xFUL << I2C_TIMINGR_SDADEL_Pos)          /*!< 0x000F0000 */
-#define I2C_TIMINGR_SDADEL           I2C_TIMINGR_SDADEL_Msk                    /*!< Data hold time */
-#define I2C_TIMINGR_SCLDEL_Pos       (20U)    
-#define I2C_TIMINGR_SCLDEL_Msk       (0xFUL << I2C_TIMINGR_SCLDEL_Pos)          /*!< 0x00F00000 */
-#define I2C_TIMINGR_SCLDEL           I2C_TIMINGR_SCLDEL_Msk                    /*!< Data setup time */
-#define I2C_TIMINGR_PRESC_Pos        (28U)    
-#define I2C_TIMINGR_PRESC_Msk        (0xFUL << I2C_TIMINGR_PRESC_Pos)           /*!< 0xF0000000 */
-#define I2C_TIMINGR_PRESC            I2C_TIMINGR_PRESC_Msk                     /*!< Timings prescaler */
-
-/******************* Bit definition for I2C_TIMEOUTR register *******************/
-#define I2C_TIMEOUTR_TIMEOUTA_Pos    (0U)     
-#define I2C_TIMEOUTR_TIMEOUTA_Msk    (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos)     /*!< 0x00000FFF */
-#define I2C_TIMEOUTR_TIMEOUTA        I2C_TIMEOUTR_TIMEOUTA_Msk                 /*!< Bus timeout A */
-#define I2C_TIMEOUTR_TIDLE_Pos       (12U)    
-#define I2C_TIMEOUTR_TIDLE_Msk       (0x1UL << I2C_TIMEOUTR_TIDLE_Pos)          /*!< 0x00001000 */
-#define I2C_TIMEOUTR_TIDLE           I2C_TIMEOUTR_TIDLE_Msk                    /*!< Idle clock timeout detection */
-#define I2C_TIMEOUTR_TIMOUTEN_Pos    (15U)    
-#define I2C_TIMEOUTR_TIMOUTEN_Msk    (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos)       /*!< 0x00008000 */
-#define I2C_TIMEOUTR_TIMOUTEN        I2C_TIMEOUTR_TIMOUTEN_Msk                 /*!< Clock timeout enable */
-#define I2C_TIMEOUTR_TIMEOUTB_Pos    (16U)    
-#define I2C_TIMEOUTR_TIMEOUTB_Msk    (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos)     /*!< 0x0FFF0000 */
-#define I2C_TIMEOUTR_TIMEOUTB        I2C_TIMEOUTR_TIMEOUTB_Msk                 /*!< Bus timeout B*/
-#define I2C_TIMEOUTR_TEXTEN_Pos      (31U)    
-#define I2C_TIMEOUTR_TEXTEN_Msk      (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos)         /*!< 0x80000000 */
-#define I2C_TIMEOUTR_TEXTEN          I2C_TIMEOUTR_TEXTEN_Msk                   /*!< Extended clock timeout enable */
-
-/******************  Bit definition for I2C_ISR register  *********************/
-#define I2C_ISR_TXE_Pos              (0U)     
-#define I2C_ISR_TXE_Msk              (0x1UL << I2C_ISR_TXE_Pos)                 /*!< 0x00000001 */
-#define I2C_ISR_TXE                  I2C_ISR_TXE_Msk                           /*!< Transmit data register empty */
-#define I2C_ISR_TXIS_Pos             (1U)     
-#define I2C_ISR_TXIS_Msk             (0x1UL << I2C_ISR_TXIS_Pos)                /*!< 0x00000002 */
-#define I2C_ISR_TXIS                 I2C_ISR_TXIS_Msk                          /*!< Transmit interrupt status */
-#define I2C_ISR_RXNE_Pos             (2U)     
-#define I2C_ISR_RXNE_Msk             (0x1UL << I2C_ISR_RXNE_Pos)                /*!< 0x00000004 */
-#define I2C_ISR_RXNE                 I2C_ISR_RXNE_Msk                          /*!< Receive data register not empty */
-#define I2C_ISR_ADDR_Pos             (3U)     
-#define I2C_ISR_ADDR_Msk             (0x1UL << I2C_ISR_ADDR_Pos)                /*!< 0x00000008 */
-#define I2C_ISR_ADDR                 I2C_ISR_ADDR_Msk                          /*!< Address matched (slave mode)*/
-#define I2C_ISR_NACKF_Pos            (4U)     
-#define I2C_ISR_NACKF_Msk            (0x1UL << I2C_ISR_NACKF_Pos)               /*!< 0x00000010 */
-#define I2C_ISR_NACKF                I2C_ISR_NACKF_Msk                         /*!< NACK received flag */
-#define I2C_ISR_STOPF_Pos            (5U)     
-#define I2C_ISR_STOPF_Msk            (0x1UL << I2C_ISR_STOPF_Pos)               /*!< 0x00000020 */
-#define I2C_ISR_STOPF                I2C_ISR_STOPF_Msk                         /*!< STOP detection flag */
-#define I2C_ISR_TC_Pos               (6U)     
-#define I2C_ISR_TC_Msk               (0x1UL << I2C_ISR_TC_Pos)                  /*!< 0x00000040 */
-#define I2C_ISR_TC                   I2C_ISR_TC_Msk                            /*!< Transfer complete (master mode) */
-#define I2C_ISR_TCR_Pos              (7U)     
-#define I2C_ISR_TCR_Msk              (0x1UL << I2C_ISR_TCR_Pos)                 /*!< 0x00000080 */
-#define I2C_ISR_TCR                  I2C_ISR_TCR_Msk                           /*!< Transfer complete reload */
-#define I2C_ISR_BERR_Pos             (8U)     
-#define I2C_ISR_BERR_Msk             (0x1UL << I2C_ISR_BERR_Pos)                /*!< 0x00000100 */
-#define I2C_ISR_BERR                 I2C_ISR_BERR_Msk                          /*!< Bus error */
-#define I2C_ISR_ARLO_Pos             (9U)     
-#define I2C_ISR_ARLO_Msk             (0x1UL << I2C_ISR_ARLO_Pos)                /*!< 0x00000200 */
-#define I2C_ISR_ARLO                 I2C_ISR_ARLO_Msk                          /*!< Arbitration lost */
-#define I2C_ISR_OVR_Pos              (10U)    
-#define I2C_ISR_OVR_Msk              (0x1UL << I2C_ISR_OVR_Pos)                 /*!< 0x00000400 */
-#define I2C_ISR_OVR                  I2C_ISR_OVR_Msk                           /*!< Overrun/Underrun */
-#define I2C_ISR_PECERR_Pos           (11U)    
-#define I2C_ISR_PECERR_Msk           (0x1UL << I2C_ISR_PECERR_Pos)              /*!< 0x00000800 */
-#define I2C_ISR_PECERR               I2C_ISR_PECERR_Msk                        /*!< PEC error in reception */
-#define I2C_ISR_TIMEOUT_Pos          (12U)    
-#define I2C_ISR_TIMEOUT_Msk          (0x1UL << I2C_ISR_TIMEOUT_Pos)             /*!< 0x00001000 */
-#define I2C_ISR_TIMEOUT              I2C_ISR_TIMEOUT_Msk                       /*!< Timeout or Tlow detection flag */
-#define I2C_ISR_ALERT_Pos            (13U)    
-#define I2C_ISR_ALERT_Msk            (0x1UL << I2C_ISR_ALERT_Pos)               /*!< 0x00002000 */
-#define I2C_ISR_ALERT                I2C_ISR_ALERT_Msk                         /*!< SMBus alert */
-#define I2C_ISR_BUSY_Pos             (15U)    
-#define I2C_ISR_BUSY_Msk             (0x1UL << I2C_ISR_BUSY_Pos)                /*!< 0x00008000 */
-#define I2C_ISR_BUSY                 I2C_ISR_BUSY_Msk                          /*!< Bus busy */
-#define I2C_ISR_DIR_Pos              (16U)    
-#define I2C_ISR_DIR_Msk              (0x1UL << I2C_ISR_DIR_Pos)                 /*!< 0x00010000 */
-#define I2C_ISR_DIR                  I2C_ISR_DIR_Msk                           /*!< Transfer direction (slave mode) */
-#define I2C_ISR_ADDCODE_Pos          (17U)    
-#define I2C_ISR_ADDCODE_Msk          (0x7FUL << I2C_ISR_ADDCODE_Pos)            /*!< 0x00FE0000 */
-#define I2C_ISR_ADDCODE              I2C_ISR_ADDCODE_Msk                       /*!< Address match code (slave mode) */
-
-/******************  Bit definition for I2C_ICR register  *********************/
-#define I2C_ICR_ADDRCF_Pos           (3U)     
-#define I2C_ICR_ADDRCF_Msk           (0x1UL << I2C_ICR_ADDRCF_Pos)              /*!< 0x00000008 */
-#define I2C_ICR_ADDRCF               I2C_ICR_ADDRCF_Msk                        /*!< Address matched clear flag */
-#define I2C_ICR_NACKCF_Pos           (4U)     
-#define I2C_ICR_NACKCF_Msk           (0x1UL << I2C_ICR_NACKCF_Pos)              /*!< 0x00000010 */
-#define I2C_ICR_NACKCF               I2C_ICR_NACKCF_Msk                        /*!< NACK clear flag */
-#define I2C_ICR_STOPCF_Pos           (5U)     
-#define I2C_ICR_STOPCF_Msk           (0x1UL << I2C_ICR_STOPCF_Pos)              /*!< 0x00000020 */
-#define I2C_ICR_STOPCF               I2C_ICR_STOPCF_Msk                        /*!< STOP detection clear flag */
-#define I2C_ICR_BERRCF_Pos           (8U)     
-#define I2C_ICR_BERRCF_Msk           (0x1UL << I2C_ICR_BERRCF_Pos)              /*!< 0x00000100 */
-#define I2C_ICR_BERRCF               I2C_ICR_BERRCF_Msk                        /*!< Bus error clear flag */
-#define I2C_ICR_ARLOCF_Pos           (9U)     
-#define I2C_ICR_ARLOCF_Msk           (0x1UL << I2C_ICR_ARLOCF_Pos)              /*!< 0x00000200 */
-#define I2C_ICR_ARLOCF               I2C_ICR_ARLOCF_Msk                        /*!< Arbitration lost clear flag */
-#define I2C_ICR_OVRCF_Pos            (10U)    
-#define I2C_ICR_OVRCF_Msk            (0x1UL << I2C_ICR_OVRCF_Pos)               /*!< 0x00000400 */
-#define I2C_ICR_OVRCF                I2C_ICR_OVRCF_Msk                         /*!< Overrun/Underrun clear flag */
-#define I2C_ICR_PECCF_Pos            (11U)    
-#define I2C_ICR_PECCF_Msk            (0x1UL << I2C_ICR_PECCF_Pos)               /*!< 0x00000800 */
-#define I2C_ICR_PECCF                I2C_ICR_PECCF_Msk                         /*!< PAC error clear flag */
-#define I2C_ICR_TIMOUTCF_Pos         (12U)    
-#define I2C_ICR_TIMOUTCF_Msk         (0x1UL << I2C_ICR_TIMOUTCF_Pos)            /*!< 0x00001000 */
-#define I2C_ICR_TIMOUTCF             I2C_ICR_TIMOUTCF_Msk                      /*!< Timeout clear flag */
-#define I2C_ICR_ALERTCF_Pos          (13U)    
-#define I2C_ICR_ALERTCF_Msk          (0x1UL << I2C_ICR_ALERTCF_Pos)             /*!< 0x00002000 */
-#define I2C_ICR_ALERTCF              I2C_ICR_ALERTCF_Msk                       /*!< Alert clear flag */
-
-/******************  Bit definition for I2C_PECR register  *********************/
-#define I2C_PECR_PEC_Pos             (0U)     
-#define I2C_PECR_PEC_Msk             (0xFFUL << I2C_PECR_PEC_Pos)               /*!< 0x000000FF */
-#define I2C_PECR_PEC                 I2C_PECR_PEC_Msk                          /*!< PEC register */
-
-/******************  Bit definition for I2C_RXDR register  *********************/
-#define I2C_RXDR_RXDATA_Pos          (0U)     
-#define I2C_RXDR_RXDATA_Msk          (0xFFUL << I2C_RXDR_RXDATA_Pos)            /*!< 0x000000FF */
-#define I2C_RXDR_RXDATA              I2C_RXDR_RXDATA_Msk                       /*!< 8-bit receive data */
-
-/******************  Bit definition for I2C_TXDR register  *********************/
-#define I2C_TXDR_TXDATA_Pos          (0U)     
-#define I2C_TXDR_TXDATA_Msk          (0xFFUL << I2C_TXDR_TXDATA_Pos)            /*!< 0x000000FF */
-#define I2C_TXDR_TXDATA              I2C_TXDR_TXDATA_Msk                       /*!< 8-bit transmit data */
-
-/******************************************************************************/
-/*                                                                            */
-/*                        Independent WATCHDOG (IWDG)                         */
-/*                                                                            */
-/******************************************************************************/
-/*******************  Bit definition for IWDG_KR register  ********************/
-#define IWDG_KR_KEY_Pos      (0U)             
-#define IWDG_KR_KEY_Msk      (0xFFFFUL << IWDG_KR_KEY_Pos)                      /*!< 0x0000FFFF */
-#define IWDG_KR_KEY          IWDG_KR_KEY_Msk                                   /*!< Key value (write only, read 0000h) */
-
-/*******************  Bit definition for IWDG_PR register  ********************/
-#define IWDG_PR_PR_Pos       (0U)             
-#define IWDG_PR_PR_Msk       (0x7UL << IWDG_PR_PR_Pos)                          /*!< 0x00000007 */
-#define IWDG_PR_PR           IWDG_PR_PR_Msk                                    /*!< PR[2:0] (Prescaler divider) */
-#define IWDG_PR_PR_0         (0x1UL << IWDG_PR_PR_Pos)                          /*!< 0x00000001 */
-#define IWDG_PR_PR_1         (0x2UL << IWDG_PR_PR_Pos)                          /*!< 0x00000002 */
-#define IWDG_PR_PR_2         (0x4UL << IWDG_PR_PR_Pos)                          /*!< 0x00000004 */
-
-/*******************  Bit definition for IWDG_RLR register  *******************/
-#define IWDG_RLR_RL_Pos      (0U)             
-#define IWDG_RLR_RL_Msk      (0xFFFUL << IWDG_RLR_RL_Pos)                       /*!< 0x00000FFF */
-#define IWDG_RLR_RL          IWDG_RLR_RL_Msk                                   /*!< Watchdog counter reload value */
-
-/*******************  Bit definition for IWDG_SR register  ********************/
-#define IWDG_SR_PVU_Pos      (0U)             
-#define IWDG_SR_PVU_Msk      (0x1UL << IWDG_SR_PVU_Pos)                         /*!< 0x00000001 */
-#define IWDG_SR_PVU          IWDG_SR_PVU_Msk                                   /*!< Watchdog prescaler value update */
-#define IWDG_SR_RVU_Pos      (1U)             
-#define IWDG_SR_RVU_Msk      (0x1UL << IWDG_SR_RVU_Pos)                         /*!< 0x00000002 */
-#define IWDG_SR_RVU          IWDG_SR_RVU_Msk                                   /*!< Watchdog counter reload value update */
-#define IWDG_SR_WVU_Pos      (2U)             
-#define IWDG_SR_WVU_Msk      (0x1UL << IWDG_SR_WVU_Pos)                         /*!< 0x00000004 */
-#define IWDG_SR_WVU          IWDG_SR_WVU_Msk                                   /*!< Watchdog counter window value update */
-
-/*******************  Bit definition for IWDG_KR register  ********************/
-#define IWDG_WINR_WIN_Pos    (0U)             
-#define IWDG_WINR_WIN_Msk    (0xFFFUL << IWDG_WINR_WIN_Pos)                     /*!< 0x00000FFF */
-#define IWDG_WINR_WIN        IWDG_WINR_WIN_Msk                                 /*!< Watchdog counter window value */
-
-/******************************************************************************/
-/*                                                                            */
-/*                         Low Power Timer (LPTTIM)                           */
-/*                                                                            */
-/******************************************************************************/
-/******************  Bit definition for LPTIM_ISR register  *******************/
-#define LPTIM_ISR_CMPM_Pos          (0U)      
-#define LPTIM_ISR_CMPM_Msk          (0x1UL << LPTIM_ISR_CMPM_Pos)               /*!< 0x00000001 */
-#define LPTIM_ISR_CMPM              LPTIM_ISR_CMPM_Msk                         /*!< Compare match */
-#define LPTIM_ISR_ARRM_Pos          (1U)      
-#define LPTIM_ISR_ARRM_Msk          (0x1UL << LPTIM_ISR_ARRM_Pos)               /*!< 0x00000002 */
-#define LPTIM_ISR_ARRM              LPTIM_ISR_ARRM_Msk                         /*!< Autoreload match */
-#define LPTIM_ISR_EXTTRIG_Pos       (2U)      
-#define LPTIM_ISR_EXTTRIG_Msk       (0x1UL << LPTIM_ISR_EXTTRIG_Pos)            /*!< 0x00000004 */
-#define LPTIM_ISR_EXTTRIG           LPTIM_ISR_EXTTRIG_Msk                      /*!< External trigger edge event */
-#define LPTIM_ISR_CMPOK_Pos         (3U)      
-#define LPTIM_ISR_CMPOK_Msk         (0x1UL << LPTIM_ISR_CMPOK_Pos)              /*!< 0x00000008 */
-#define LPTIM_ISR_CMPOK             LPTIM_ISR_CMPOK_Msk                        /*!< Compare register update OK */
-#define LPTIM_ISR_ARROK_Pos         (4U)      
-#define LPTIM_ISR_ARROK_Msk         (0x1UL << LPTIM_ISR_ARROK_Pos)              /*!< 0x00000010 */
-#define LPTIM_ISR_ARROK             LPTIM_ISR_ARROK_Msk                        /*!< Autoreload register update OK */
-#define LPTIM_ISR_UP_Pos            (5U)      
-#define LPTIM_ISR_UP_Msk            (0x1UL << LPTIM_ISR_UP_Pos)                 /*!< 0x00000020 */
-#define LPTIM_ISR_UP                LPTIM_ISR_UP_Msk                           /*!< Counter direction change down to up */
-#define LPTIM_ISR_DOWN_Pos          (6U)      
-#define LPTIM_ISR_DOWN_Msk          (0x1UL << LPTIM_ISR_DOWN_Pos)               /*!< 0x00000040 */
-#define LPTIM_ISR_DOWN              LPTIM_ISR_DOWN_Msk                         /*!< Counter direction change up to down */
-
-/******************  Bit definition for LPTIM_ICR register  *******************/
-#define LPTIM_ICR_CMPMCF_Pos        (0U)      
-#define LPTIM_ICR_CMPMCF_Msk        (0x1UL << LPTIM_ICR_CMPMCF_Pos)             /*!< 0x00000001 */
-#define LPTIM_ICR_CMPMCF            LPTIM_ICR_CMPMCF_Msk                       /*!< Compare match Clear Flag */
-#define LPTIM_ICR_ARRMCF_Pos        (1U)      
-#define LPTIM_ICR_ARRMCF_Msk        (0x1UL << LPTIM_ICR_ARRMCF_Pos)             /*!< 0x00000002 */
-#define LPTIM_ICR_ARRMCF            LPTIM_ICR_ARRMCF_Msk                       /*!< Autoreload match Clear Flag */
-#define LPTIM_ICR_EXTTRIGCF_Pos     (2U)      
-#define LPTIM_ICR_EXTTRIGCF_Msk     (0x1UL << LPTIM_ICR_EXTTRIGCF_Pos)          /*!< 0x00000004 */
-#define LPTIM_ICR_EXTTRIGCF         LPTIM_ICR_EXTTRIGCF_Msk                    /*!< External trigger edge event Clear Flag */
-#define LPTIM_ICR_CMPOKCF_Pos       (3U)      
-#define LPTIM_ICR_CMPOKCF_Msk       (0x1UL << LPTIM_ICR_CMPOKCF_Pos)            /*!< 0x00000008 */
-#define LPTIM_ICR_CMPOKCF           LPTIM_ICR_CMPOKCF_Msk                      /*!< Compare register update OK Clear Flag */
-#define LPTIM_ICR_ARROKCF_Pos       (4U)      
-#define LPTIM_ICR_ARROKCF_Msk       (0x1UL << LPTIM_ICR_ARROKCF_Pos)            /*!< 0x00000010 */
-#define LPTIM_ICR_ARROKCF           LPTIM_ICR_ARROKCF_Msk                      /*!< Autoreload register update OK Clear Flag */
-#define LPTIM_ICR_UPCF_Pos          (5U)      
-#define LPTIM_ICR_UPCF_Msk          (0x1UL << LPTIM_ICR_UPCF_Pos)               /*!< 0x00000020 */
-#define LPTIM_ICR_UPCF              LPTIM_ICR_UPCF_Msk                         /*!< Counter direction change down to up Clear Flag */
-#define LPTIM_ICR_DOWNCF_Pos        (6U)      
-#define LPTIM_ICR_DOWNCF_Msk        (0x1UL << LPTIM_ICR_DOWNCF_Pos)             /*!< 0x00000040 */
-#define LPTIM_ICR_DOWNCF            LPTIM_ICR_DOWNCF_Msk                       /*!< Counter direction change up to down Clear Flag */
-
-/******************  Bit definition for LPTIM_IER register ********************/
-#define LPTIM_IER_CMPMIE_Pos        (0U)      
-#define LPTIM_IER_CMPMIE_Msk        (0x1UL << LPTIM_IER_CMPMIE_Pos)             /*!< 0x00000001 */
-#define LPTIM_IER_CMPMIE            LPTIM_IER_CMPMIE_Msk                       /*!< Compare match Interrupt Enable */
-#define LPTIM_IER_ARRMIE_Pos        (1U)      
-#define LPTIM_IER_ARRMIE_Msk        (0x1UL << LPTIM_IER_ARRMIE_Pos)             /*!< 0x00000002 */
-#define LPTIM_IER_ARRMIE            LPTIM_IER_ARRMIE_Msk                       /*!< Autoreload match Interrupt Enable */
-#define LPTIM_IER_EXTTRIGIE_Pos     (2U)      
-#define LPTIM_IER_EXTTRIGIE_Msk     (0x1UL << LPTIM_IER_EXTTRIGIE_Pos)          /*!< 0x00000004 */
-#define LPTIM_IER_EXTTRIGIE         LPTIM_IER_EXTTRIGIE_Msk                    /*!< External trigger edge event Interrupt Enable */
-#define LPTIM_IER_CMPOKIE_Pos       (3U)      
-#define LPTIM_IER_CMPOKIE_Msk       (0x1UL << LPTIM_IER_CMPOKIE_Pos)            /*!< 0x00000008 */
-#define LPTIM_IER_CMPOKIE           LPTIM_IER_CMPOKIE_Msk                      /*!< Compare register update OK Interrupt Enable */
-#define LPTIM_IER_ARROKIE_Pos       (4U)      
-#define LPTIM_IER_ARROKIE_Msk       (0x1UL << LPTIM_IER_ARROKIE_Pos)            /*!< 0x00000010 */
-#define LPTIM_IER_ARROKIE           LPTIM_IER_ARROKIE_Msk                      /*!< Autoreload register update OK Interrupt Enable */
-#define LPTIM_IER_UPIE_Pos          (5U)      
-#define LPTIM_IER_UPIE_Msk          (0x1UL << LPTIM_IER_UPIE_Pos)               /*!< 0x00000020 */
-#define LPTIM_IER_UPIE              LPTIM_IER_UPIE_Msk                         /*!< Counter direction change down to up Interrupt Enable */
-#define LPTIM_IER_DOWNIE_Pos        (6U)      
-#define LPTIM_IER_DOWNIE_Msk        (0x1UL << LPTIM_IER_DOWNIE_Pos)             /*!< 0x00000040 */
-#define LPTIM_IER_DOWNIE            LPTIM_IER_DOWNIE_Msk                       /*!< Counter direction change up to down Interrupt Enable */
-
-/******************  Bit definition for LPTIM_CFGR register *******************/
-#define LPTIM_CFGR_CKSEL_Pos        (0U)      
-#define LPTIM_CFGR_CKSEL_Msk        (0x1UL << LPTIM_CFGR_CKSEL_Pos)             /*!< 0x00000001 */
-#define LPTIM_CFGR_CKSEL            LPTIM_CFGR_CKSEL_Msk                       /*!< Clock selector */
-
-#define LPTIM_CFGR_CKPOL_Pos        (1U)      
-#define LPTIM_CFGR_CKPOL_Msk        (0x3UL << LPTIM_CFGR_CKPOL_Pos)             /*!< 0x00000006 */
-#define LPTIM_CFGR_CKPOL            LPTIM_CFGR_CKPOL_Msk                       /*!< CKPOL[1:0] bits (Clock polarity) */
-#define LPTIM_CFGR_CKPOL_0          (0x1UL << LPTIM_CFGR_CKPOL_Pos)             /*!< 0x00000002 */
-#define LPTIM_CFGR_CKPOL_1          (0x2UL << LPTIM_CFGR_CKPOL_Pos)             /*!< 0x00000004 */
-
-#define LPTIM_CFGR_CKFLT_Pos        (3U)      
-#define LPTIM_CFGR_CKFLT_Msk        (0x3UL << LPTIM_CFGR_CKFLT_Pos)             /*!< 0x00000018 */
-#define LPTIM_CFGR_CKFLT            LPTIM_CFGR_CKFLT_Msk                       /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */
-#define LPTIM_CFGR_CKFLT_0          (0x1UL << LPTIM_CFGR_CKFLT_Pos)             /*!< 0x00000008 */
-#define LPTIM_CFGR_CKFLT_1          (0x2UL << LPTIM_CFGR_CKFLT_Pos)             /*!< 0x00000010 */
-
-#define LPTIM_CFGR_TRGFLT_Pos       (6U)      
-#define LPTIM_CFGR_TRGFLT_Msk       (0x3UL << LPTIM_CFGR_TRGFLT_Pos)            /*!< 0x000000C0 */
-#define LPTIM_CFGR_TRGFLT           LPTIM_CFGR_TRGFLT_Msk                      /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */
-#define LPTIM_CFGR_TRGFLT_0         (0x1UL << LPTIM_CFGR_TRGFLT_Pos)            /*!< 0x00000040 */
-#define LPTIM_CFGR_TRGFLT_1         (0x2UL << LPTIM_CFGR_TRGFLT_Pos)            /*!< 0x00000080 */
-
-#define LPTIM_CFGR_PRESC_Pos        (9U)      
-#define LPTIM_CFGR_PRESC_Msk        (0x7UL << LPTIM_CFGR_PRESC_Pos)             /*!< 0x00000E00 */
-#define LPTIM_CFGR_PRESC            LPTIM_CFGR_PRESC_Msk                       /*!< PRESC[2:0] bits (Clock prescaler) */
-#define LPTIM_CFGR_PRESC_0          (0x1UL << LPTIM_CFGR_PRESC_Pos)             /*!< 0x00000200 */
-#define LPTIM_CFGR_PRESC_1          (0x2UL << LPTIM_CFGR_PRESC_Pos)             /*!< 0x00000400 */
-#define LPTIM_CFGR_PRESC_2          (0x4UL << LPTIM_CFGR_PRESC_Pos)             /*!< 0x00000800 */
-
-#define LPTIM_CFGR_TRIGSEL_Pos      (13U)     
-#define LPTIM_CFGR_TRIGSEL_Msk      (0x7UL << LPTIM_CFGR_TRIGSEL_Pos)           /*!< 0x0000E000 */
-#define LPTIM_CFGR_TRIGSEL          LPTIM_CFGR_TRIGSEL_Msk                     /*!< TRIGSEL[2:0]] bits (Trigger selector) */
-#define LPTIM_CFGR_TRIGSEL_0        (0x1UL << LPTIM_CFGR_TRIGSEL_Pos)           /*!< 0x00002000 */
-#define LPTIM_CFGR_TRIGSEL_1        (0x2UL << LPTIM_CFGR_TRIGSEL_Pos)           /*!< 0x00004000 */
-#define LPTIM_CFGR_TRIGSEL_2        (0x4UL << LPTIM_CFGR_TRIGSEL_Pos)           /*!< 0x00008000 */
-
-#define LPTIM_CFGR_TRIGEN_Pos       (17U)     
-#define LPTIM_CFGR_TRIGEN_Msk       (0x3UL << LPTIM_CFGR_TRIGEN_Pos)            /*!< 0x00060000 */
-#define LPTIM_CFGR_TRIGEN           LPTIM_CFGR_TRIGEN_Msk                      /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */
-#define LPTIM_CFGR_TRIGEN_0         (0x1UL << LPTIM_CFGR_TRIGEN_Pos)            /*!< 0x00020000 */
-#define LPTIM_CFGR_TRIGEN_1         (0x2UL << LPTIM_CFGR_TRIGEN_Pos)            /*!< 0x00040000 */
-
-#define LPTIM_CFGR_TIMOUT_Pos       (19U)     
-#define LPTIM_CFGR_TIMOUT_Msk       (0x1UL << LPTIM_CFGR_TIMOUT_Pos)            /*!< 0x00080000 */
-#define LPTIM_CFGR_TIMOUT           LPTIM_CFGR_TIMOUT_Msk                      /*!< Timout enable */
-#define LPTIM_CFGR_WAVE_Pos         (20U)     
-#define LPTIM_CFGR_WAVE_Msk         (0x1UL << LPTIM_CFGR_WAVE_Pos)              /*!< 0x00100000 */
-#define LPTIM_CFGR_WAVE             LPTIM_CFGR_WAVE_Msk                        /*!< Waveform shape */
-#define LPTIM_CFGR_WAVPOL_Pos       (21U)     
-#define LPTIM_CFGR_WAVPOL_Msk       (0x1UL << LPTIM_CFGR_WAVPOL_Pos)            /*!< 0x00200000 */
-#define LPTIM_CFGR_WAVPOL           LPTIM_CFGR_WAVPOL_Msk                      /*!< Waveform shape polarity */
-#define LPTIM_CFGR_PRELOAD_Pos      (22U)     
-#define LPTIM_CFGR_PRELOAD_Msk      (0x1UL << LPTIM_CFGR_PRELOAD_Pos)           /*!< 0x00400000 */
-#define LPTIM_CFGR_PRELOAD          LPTIM_CFGR_PRELOAD_Msk                     /*!< Reg update mode */
-#define LPTIM_CFGR_COUNTMODE_Pos    (23U)     
-#define LPTIM_CFGR_COUNTMODE_Msk    (0x1UL << LPTIM_CFGR_COUNTMODE_Pos)         /*!< 0x00800000 */
-#define LPTIM_CFGR_COUNTMODE        LPTIM_CFGR_COUNTMODE_Msk                   /*!< Counter mode enable */
-#define LPTIM_CFGR_ENC_Pos          (24U)     
-#define LPTIM_CFGR_ENC_Msk          (0x1UL << LPTIM_CFGR_ENC_Pos)               /*!< 0x01000000 */
-#define LPTIM_CFGR_ENC              LPTIM_CFGR_ENC_Msk                         /*!< Encoder mode enable */
-
-/******************  Bit definition for LPTIM_CR register  ********************/
-#define LPTIM_CR_ENABLE_Pos         (0U)      
-#define LPTIM_CR_ENABLE_Msk         (0x1UL << LPTIM_CR_ENABLE_Pos)              /*!< 0x00000001 */
-#define LPTIM_CR_ENABLE             LPTIM_CR_ENABLE_Msk                        /*!< LPTIMer enable */
-#define LPTIM_CR_SNGSTRT_Pos        (1U)      
-#define LPTIM_CR_SNGSTRT_Msk        (0x1UL << LPTIM_CR_SNGSTRT_Pos)             /*!< 0x00000002 */
-#define LPTIM_CR_SNGSTRT            LPTIM_CR_SNGSTRT_Msk                       /*!< Timer start in single mode */
-#define LPTIM_CR_CNTSTRT_Pos        (2U)      
-#define LPTIM_CR_CNTSTRT_Msk        (0x1UL << LPTIM_CR_CNTSTRT_Pos)             /*!< 0x00000004 */
-#define LPTIM_CR_CNTSTRT            LPTIM_CR_CNTSTRT_Msk                       /*!< Timer start in continuous mode */
-
-/******************  Bit definition for LPTIM_CMP register  *******************/
-#define LPTIM_CMP_CMP_Pos           (0U)      
-#define LPTIM_CMP_CMP_Msk           (0xFFFFUL << LPTIM_CMP_CMP_Pos)             /*!< 0x0000FFFF */
-#define LPTIM_CMP_CMP               LPTIM_CMP_CMP_Msk                          /*!< Compare register */
-
-/******************  Bit definition for LPTIM_ARR register  *******************/
-#define LPTIM_ARR_ARR_Pos           (0U)      
-#define LPTIM_ARR_ARR_Msk           (0xFFFFUL << LPTIM_ARR_ARR_Pos)             /*!< 0x0000FFFF */
-#define LPTIM_ARR_ARR               LPTIM_ARR_ARR_Msk                          /*!< Auto reload register */
-
-/******************  Bit definition for LPTIM_CNT register  *******************/
-#define LPTIM_CNT_CNT_Pos           (0U)      
-#define LPTIM_CNT_CNT_Msk           (0xFFFFUL << LPTIM_CNT_CNT_Pos)             /*!< 0x0000FFFF */
-#define LPTIM_CNT_CNT               LPTIM_CNT_CNT_Msk                          /*!< Counter register */
-
-/******************************************************************************/
-/*                                                                            */
-/*                            MIFARE   Firewall                               */
-/*                                                                            */
-/******************************************************************************/
-
-/*******Bit definition for CSSA;CSL;NVDSSA;NVDSL;VDSSA;VDSL register */
-#define FW_CSSA_ADD_Pos      (8U)             
-#define FW_CSSA_ADD_Msk      (0xFFFFUL << FW_CSSA_ADD_Pos)                      /*!< 0x00FFFF00 */
-#define FW_CSSA_ADD          FW_CSSA_ADD_Msk                                   /*!< Code Segment Start Address */ 
-#define FW_CSL_LENG_Pos      (8U)             
-#define FW_CSL_LENG_Msk      (0x3FFFUL << FW_CSL_LENG_Pos)                      /*!< 0x003FFF00 */
-#define FW_CSL_LENG          FW_CSL_LENG_Msk                                   /*!< Code Segment Length        */  
-#define FW_NVDSSA_ADD_Pos    (8U)             
-#define FW_NVDSSA_ADD_Msk    (0xFFFFUL << FW_NVDSSA_ADD_Pos)                    /*!< 0x00FFFF00 */
-#define FW_NVDSSA_ADD        FW_NVDSSA_ADD_Msk                                 /*!< Non Volatile Dat Segment Start Address */ 
-#define FW_NVDSL_LENG_Pos    (8U)             
-#define FW_NVDSL_LENG_Msk    (0x3FFFUL << FW_NVDSL_LENG_Pos)                    /*!< 0x003FFF00 */
-#define FW_NVDSL_LENG        FW_NVDSL_LENG_Msk                                 /*!< Non Volatile Data Segment Length */ 
-#define FW_VDSSA_ADD_Pos     (6U)             
-#define FW_VDSSA_ADD_Msk     (0x3FFUL << FW_VDSSA_ADD_Pos)                      /*!< 0x0000FFC0 */
-#define FW_VDSSA_ADD         FW_VDSSA_ADD_Msk                                  /*!< Volatile Data Segment Start Address */ 
-#define FW_VDSL_LENG_Pos     (6U)             
-#define FW_VDSL_LENG_Msk     (0x3FFUL << FW_VDSL_LENG_Pos)                      /*!< 0x0000FFC0 */
-#define FW_VDSL_LENG         FW_VDSL_LENG_Msk                                  /*!< Volatile Data Segment Length */ 
-
-/**************************Bit definition for CR register *********************/
-#define FW_CR_FPA_Pos        (0U)             
-#define FW_CR_FPA_Msk        (0x1UL << FW_CR_FPA_Pos)                           /*!< 0x00000001 */
-#define FW_CR_FPA            FW_CR_FPA_Msk                                     /*!< Firewall Pre Arm*/ 
-#define FW_CR_VDS_Pos        (1U)             
-#define FW_CR_VDS_Msk        (0x1UL << FW_CR_VDS_Pos)                           /*!< 0x00000002 */
-#define FW_CR_VDS            FW_CR_VDS_Msk                                     /*!< Volatile Data Sharing*/ 
-#define FW_CR_VDE_Pos        (2U)             
-#define FW_CR_VDE_Msk        (0x1UL << FW_CR_VDE_Pos)                           /*!< 0x00000004 */
-#define FW_CR_VDE            FW_CR_VDE_Msk                                     /*!< Volatile Data Execution*/ 
-
-/******************************************************************************/
-/*                                                                            */
-/*                          Power Control (PWR)                               */
-/*                                                                            */
-/******************************************************************************/
-
-#define PWR_PVD_SUPPORT                     /*!< PVD feature available on all devices: Power Voltage Detection feature */
-
-/********************  Bit definition for PWR_CR register  ********************/
-#define PWR_CR_LPSDSR_Pos          (0U)       
-#define PWR_CR_LPSDSR_Msk          (0x1UL << PWR_CR_LPSDSR_Pos)                 /*!< 0x00000001 */
-#define PWR_CR_LPSDSR              PWR_CR_LPSDSR_Msk                           /*!< Low-power deepsleep/sleep/low power run */
-#define PWR_CR_PDDS_Pos            (1U)       
-#define PWR_CR_PDDS_Msk            (0x1UL << PWR_CR_PDDS_Pos)                   /*!< 0x00000002 */
-#define PWR_CR_PDDS                PWR_CR_PDDS_Msk                             /*!< Power Down Deepsleep */
-#define PWR_CR_CWUF_Pos            (2U)       
-#define PWR_CR_CWUF_Msk            (0x1UL << PWR_CR_CWUF_Pos)                   /*!< 0x00000004 */
-#define PWR_CR_CWUF                PWR_CR_CWUF_Msk                             /*!< Clear Wakeup Flag */
-#define PWR_CR_CSBF_Pos            (3U)       
-#define PWR_CR_CSBF_Msk            (0x1UL << PWR_CR_CSBF_Pos)                   /*!< 0x00000008 */
-#define PWR_CR_CSBF                PWR_CR_CSBF_Msk                             /*!< Clear Standby Flag */
-#define PWR_CR_PVDE_Pos            (4U)       
-#define PWR_CR_PVDE_Msk            (0x1UL << PWR_CR_PVDE_Pos)                   /*!< 0x00000010 */
-#define PWR_CR_PVDE                PWR_CR_PVDE_Msk                             /*!< Power Voltage Detector Enable */
-
-#define PWR_CR_PLS_Pos             (5U)       
-#define PWR_CR_PLS_Msk             (0x7UL << PWR_CR_PLS_Pos)                    /*!< 0x000000E0 */
-#define PWR_CR_PLS                 PWR_CR_PLS_Msk                              /*!< PLS[2:0] bits (PVD Level Selection) */
-#define PWR_CR_PLS_0               (0x1UL << PWR_CR_PLS_Pos)                    /*!< 0x00000020 */
-#define PWR_CR_PLS_1               (0x2UL << PWR_CR_PLS_Pos)                    /*!< 0x00000040 */
-#define PWR_CR_PLS_2               (0x4UL << PWR_CR_PLS_Pos)                    /*!< 0x00000080 */
-
-/*!< PVD level configuration */
-#define PWR_CR_PLS_LEV0            (0x00000000U)                               /*!< PVD level 0 */
-#define PWR_CR_PLS_LEV1            (0x00000020U)                               /*!< PVD level 1 */
-#define PWR_CR_PLS_LEV2            (0x00000040U)                               /*!< PVD level 2 */
-#define PWR_CR_PLS_LEV3            (0x00000060U)                               /*!< PVD level 3 */
-#define PWR_CR_PLS_LEV4            (0x00000080U)                               /*!< PVD level 4 */
-#define PWR_CR_PLS_LEV5            (0x000000A0U)                               /*!< PVD level 5 */
-#define PWR_CR_PLS_LEV6            (0x000000C0U)                               /*!< PVD level 6 */
-#define PWR_CR_PLS_LEV7            (0x000000E0U)                               /*!< PVD level 7 */
-
-#define PWR_CR_DBP_Pos             (8U)       
-#define PWR_CR_DBP_Msk             (0x1UL << PWR_CR_DBP_Pos)                    /*!< 0x00000100 */
-#define PWR_CR_DBP                 PWR_CR_DBP_Msk                              /*!< Disable Backup Domain write protection */
-#define PWR_CR_ULP_Pos             (9U)       
-#define PWR_CR_ULP_Msk             (0x1UL << PWR_CR_ULP_Pos)                    /*!< 0x00000200 */
-#define PWR_CR_ULP                 PWR_CR_ULP_Msk                              /*!< Ultra Low Power mode */
-#define PWR_CR_FWU_Pos             (10U)      
-#define PWR_CR_FWU_Msk             (0x1UL << PWR_CR_FWU_Pos)                    /*!< 0x00000400 */
-#define PWR_CR_FWU                 PWR_CR_FWU_Msk                              /*!< Fast wakeup */
-
-#define PWR_CR_VOS_Pos             (11U)      
-#define PWR_CR_VOS_Msk             (0x3UL << PWR_CR_VOS_Pos)                    /*!< 0x00001800 */
-#define PWR_CR_VOS                 PWR_CR_VOS_Msk                              /*!< VOS[1:0] bits (Voltage scaling range selection) */
-#define PWR_CR_VOS_0               (0x1UL << PWR_CR_VOS_Pos)                    /*!< 0x00000800 */
-#define PWR_CR_VOS_1               (0x2UL << PWR_CR_VOS_Pos)                    /*!< 0x00001000 */
-#define PWR_CR_DSEEKOFF_Pos        (13U)      
-#define PWR_CR_DSEEKOFF_Msk        (0x1UL << PWR_CR_DSEEKOFF_Pos)               /*!< 0x00002000 */
-#define PWR_CR_DSEEKOFF            PWR_CR_DSEEKOFF_Msk                         /*!< Deep Sleep mode with EEPROM kept Off */
-#define PWR_CR_LPRUN_Pos           (14U)      
-#define PWR_CR_LPRUN_Msk           (0x1UL << PWR_CR_LPRUN_Pos)                  /*!< 0x00004000 */
-#define PWR_CR_LPRUN               PWR_CR_LPRUN_Msk                            /*!< Low power run mode */
-
-/*******************  Bit definition for PWR_CSR register  ********************/
-#define PWR_CSR_WUF_Pos            (0U)       
-#define PWR_CSR_WUF_Msk            (0x1UL << PWR_CSR_WUF_Pos)                   /*!< 0x00000001 */
-#define PWR_CSR_WUF                PWR_CSR_WUF_Msk                             /*!< Wakeup Flag */
-#define PWR_CSR_SBF_Pos            (1U)       
-#define PWR_CSR_SBF_Msk            (0x1UL << PWR_CSR_SBF_Pos)                   /*!< 0x00000002 */
-#define PWR_CSR_SBF                PWR_CSR_SBF_Msk                             /*!< Standby Flag */
-#define PWR_CSR_PVDO_Pos           (2U)       
-#define PWR_CSR_PVDO_Msk           (0x1UL << PWR_CSR_PVDO_Pos)                  /*!< 0x00000004 */
-#define PWR_CSR_PVDO               PWR_CSR_PVDO_Msk                            /*!< PVD Output */
-#define PWR_CSR_VREFINTRDYF_Pos    (3U)       
-#define PWR_CSR_VREFINTRDYF_Msk    (0x1UL << PWR_CSR_VREFINTRDYF_Pos)           /*!< 0x00000008 */
-#define PWR_CSR_VREFINTRDYF        PWR_CSR_VREFINTRDYF_Msk                     /*!< Internal voltage reference (VREFINT) ready flag */
-#define PWR_CSR_VOSF_Pos           (4U)       
-#define PWR_CSR_VOSF_Msk           (0x1UL << PWR_CSR_VOSF_Pos)                  /*!< 0x00000010 */
-#define PWR_CSR_VOSF               PWR_CSR_VOSF_Msk                            /*!< Voltage Scaling select flag */
-#define PWR_CSR_REGLPF_Pos         (5U)       
-#define PWR_CSR_REGLPF_Msk         (0x1UL << PWR_CSR_REGLPF_Pos)                /*!< 0x00000020 */
-#define PWR_CSR_REGLPF             PWR_CSR_REGLPF_Msk                          /*!< Regulator LP flag */
-
-#define PWR_CSR_EWUP1_Pos          (8U)       
-#define PWR_CSR_EWUP1_Msk          (0x1UL << PWR_CSR_EWUP1_Pos)                 /*!< 0x00000100 */
-#define PWR_CSR_EWUP1              PWR_CSR_EWUP1_Msk                           /*!< Enable WKUP pin 1 */
-#define PWR_CSR_EWUP2_Pos          (9U)       
-#define PWR_CSR_EWUP2_Msk          (0x1UL << PWR_CSR_EWUP2_Pos)                 /*!< 0x00000200 */
-#define PWR_CSR_EWUP2              PWR_CSR_EWUP2_Msk                           /*!< Enable WKUP pin 2 */
-
-/******************************************************************************/
-/*                                                                            */
-/*                         Reset and Clock Control                            */
-/*                                                                            */
-/******************************************************************************/
-
-#define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
-
-/********************  Bit definition for RCC_CR register  ********************/
-#define RCC_CR_HSION_Pos                 (0U) 
-#define RCC_CR_HSION_Msk                 (0x1UL << RCC_CR_HSION_Pos)            /*!< 0x00000001 */
-#define RCC_CR_HSION                     RCC_CR_HSION_Msk                      /*!< Internal High Speed clock enable */
-#define RCC_CR_HSIKERON_Pos              (1U) 
-#define RCC_CR_HSIKERON_Msk              (0x1UL << RCC_CR_HSIKERON_Pos)         /*!< 0x00000002 */
-#define RCC_CR_HSIKERON                  RCC_CR_HSIKERON_Msk                   /*!< Internal High Speed clock enable for some IPs Kernel */
-#define RCC_CR_HSIRDY_Pos                (2U) 
-#define RCC_CR_HSIRDY_Msk                (0x1UL << RCC_CR_HSIRDY_Pos)           /*!< 0x00000004 */
-#define RCC_CR_HSIRDY                    RCC_CR_HSIRDY_Msk                     /*!< Internal High Speed clock ready flag */
-#define RCC_CR_HSIDIVEN_Pos              (3U) 
-#define RCC_CR_HSIDIVEN_Msk              (0x1UL << RCC_CR_HSIDIVEN_Pos)         /*!< 0x00000008 */
-#define RCC_CR_HSIDIVEN                  RCC_CR_HSIDIVEN_Msk                   /*!< Internal High Speed clock divider enable */
-#define RCC_CR_HSIDIVF_Pos               (4U) 
-#define RCC_CR_HSIDIVF_Msk               (0x1UL << RCC_CR_HSIDIVF_Pos)          /*!< 0x00000010 */
-#define RCC_CR_HSIDIVF                   RCC_CR_HSIDIVF_Msk                    /*!< Internal High Speed clock divider flag */
-#define RCC_CR_MSION_Pos                 (8U) 
-#define RCC_CR_MSION_Msk                 (0x1UL << RCC_CR_MSION_Pos)            /*!< 0x00000100 */
-#define RCC_CR_MSION                     RCC_CR_MSION_Msk                      /*!< Internal Multi Speed clock enable */
-#define RCC_CR_MSIRDY_Pos                (9U) 
-#define RCC_CR_MSIRDY_Msk                (0x1UL << RCC_CR_MSIRDY_Pos)           /*!< 0x00000200 */
-#define RCC_CR_MSIRDY                    RCC_CR_MSIRDY_Msk                     /*!< Internal Multi Speed clock ready flag */
-#define RCC_CR_HSEON_Pos                 (16U)
-#define RCC_CR_HSEON_Msk                 (0x1UL << RCC_CR_HSEON_Pos)            /*!< 0x00010000 */
-#define RCC_CR_HSEON                     RCC_CR_HSEON_Msk                      /*!< External High Speed clock enable */
-#define RCC_CR_HSERDY_Pos                (17U)
-#define RCC_CR_HSERDY_Msk                (0x1UL << RCC_CR_HSERDY_Pos)           /*!< 0x00020000 */
-#define RCC_CR_HSERDY                    RCC_CR_HSERDY_Msk                     /*!< External High Speed clock ready flag */
-#define RCC_CR_HSEBYP_Pos                (18U)
-#define RCC_CR_HSEBYP_Msk                (0x1UL << RCC_CR_HSEBYP_Pos)           /*!< 0x00040000 */
-#define RCC_CR_HSEBYP                    RCC_CR_HSEBYP_Msk                     /*!< External High Speed clock Bypass */
-#define RCC_CR_CSSHSEON_Pos              (19U)
-#define RCC_CR_CSSHSEON_Msk              (0x1UL << RCC_CR_CSSHSEON_Pos)         /*!< 0x00080000 */
-#define RCC_CR_CSSHSEON                  RCC_CR_CSSHSEON_Msk                   /*!< HSE Clock Security System enable */
-#define RCC_CR_RTCPRE_Pos                (20U)
-#define RCC_CR_RTCPRE_Msk                (0x3UL << RCC_CR_RTCPRE_Pos)           /*!< 0x00300000 */
-#define RCC_CR_RTCPRE                    RCC_CR_RTCPRE_Msk                     /*!< RTC prescaler [1:0] bits */
-#define RCC_CR_RTCPRE_0                  (0x1UL << RCC_CR_RTCPRE_Pos)           /*!< 0x00100000 */
-#define RCC_CR_RTCPRE_1                  (0x2UL << RCC_CR_RTCPRE_Pos)           /*!< 0x00200000 */
-#define RCC_CR_PLLON_Pos                 (24U)
-#define RCC_CR_PLLON_Msk                 (0x1UL << RCC_CR_PLLON_Pos)            /*!< 0x01000000 */
-#define RCC_CR_PLLON                     RCC_CR_PLLON_Msk                      /*!< PLL enable */
-#define RCC_CR_PLLRDY_Pos                (25U)
-#define RCC_CR_PLLRDY_Msk                (0x1UL << RCC_CR_PLLRDY_Pos)           /*!< 0x02000000 */
-#define RCC_CR_PLLRDY                    RCC_CR_PLLRDY_Msk                     /*!< PLL clock ready flag */
-
-/* Reference defines */
-#define RCC_CR_CSSON     RCC_CR_CSSHSEON
-
-/********************  Bit definition for RCC_ICSCR register  *****************/
-#define RCC_ICSCR_HSICAL_Pos             (0U) 
-#define RCC_ICSCR_HSICAL_Msk             (0xFFUL << RCC_ICSCR_HSICAL_Pos)       /*!< 0x000000FF */
-#define RCC_ICSCR_HSICAL                 RCC_ICSCR_HSICAL_Msk                  /*!< Internal High Speed clock Calibration */
-#define RCC_ICSCR_HSITRIM_Pos            (8U) 
-#define RCC_ICSCR_HSITRIM_Msk            (0x1FUL << RCC_ICSCR_HSITRIM_Pos)      /*!< 0x00001F00 */
-#define RCC_ICSCR_HSITRIM                RCC_ICSCR_HSITRIM_Msk                 /*!< Internal High Speed clock trimming */
-
-#define RCC_ICSCR_MSIRANGE_Pos           (13U)
-#define RCC_ICSCR_MSIRANGE_Msk           (0x7UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x0000E000 */
-#define RCC_ICSCR_MSIRANGE               RCC_ICSCR_MSIRANGE_Msk                /*!< Internal Multi Speed clock Range */
-#define RCC_ICSCR_MSIRANGE_0             (0x0UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x00000000 */
-#define RCC_ICSCR_MSIRANGE_1             (0x1UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x00002000 */
-#define RCC_ICSCR_MSIRANGE_2             (0x2UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x00004000 */
-#define RCC_ICSCR_MSIRANGE_3             (0x3UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x00006000 */
-#define RCC_ICSCR_MSIRANGE_4             (0x4UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x00008000 */
-#define RCC_ICSCR_MSIRANGE_5             (0x5UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x0000A000 */
-#define RCC_ICSCR_MSIRANGE_6             (0x6UL << RCC_ICSCR_MSIRANGE_Pos)      /*!< 0x0000C000 */
-#define RCC_ICSCR_MSICAL_Pos             (16U)
-#define RCC_ICSCR_MSICAL_Msk             (0xFFUL << RCC_ICSCR_MSICAL_Pos)       /*!< 0x00FF0000 */
-#define RCC_ICSCR_MSICAL                 RCC_ICSCR_MSICAL_Msk                  /*!< Internal Multi Speed clock Calibration */
-#define RCC_ICSCR_MSITRIM_Pos            (24U)
-#define RCC_ICSCR_MSITRIM_Msk            (0xFFUL << RCC_ICSCR_MSITRIM_Pos)      /*!< 0xFF000000 */
-#define RCC_ICSCR_MSITRIM                RCC_ICSCR_MSITRIM_Msk                 /*!< Internal Multi Speed clock trimming */
-
-
-/*******************  Bit definition for RCC_CFGR register  *******************/
-/*!< SW configuration */
-#define RCC_CFGR_SW_Pos                      (0U)                              
-#define RCC_CFGR_SW_Msk                      (0x3UL << RCC_CFGR_SW_Pos)         /*!< 0x00000003 */
-#define RCC_CFGR_SW                          RCC_CFGR_SW_Msk                   /*!< SW[1:0] bits (System clock Switch) */
-#define RCC_CFGR_SW_0                        (0x1UL << RCC_CFGR_SW_Pos)         /*!< 0x00000001 */
-#define RCC_CFGR_SW_1                        (0x2UL << RCC_CFGR_SW_Pos)         /*!< 0x00000002 */
-
-#define RCC_CFGR_SW_MSI                      (0x00000000U)                     /*!< MSI selected as system clock */
-#define RCC_CFGR_SW_HSI                      (0x00000001U)                     /*!< HSI selected as system clock */
-#define RCC_CFGR_SW_HSE                      (0x00000002U)                     /*!< HSE selected as system clock */
-#define RCC_CFGR_SW_PLL                      (0x00000003U)                     /*!< PLL selected as system clock */
-
-/*!< SWS configuration */
-#define RCC_CFGR_SWS_Pos                     (2U)                              
-#define RCC_CFGR_SWS_Msk                     (0x3UL << RCC_CFGR_SWS_Pos)        /*!< 0x0000000C */
-#define RCC_CFGR_SWS                         RCC_CFGR_SWS_Msk                  /*!< SWS[1:0] bits (System Clock Switch Status) */
-#define RCC_CFGR_SWS_0                       (0x1UL << RCC_CFGR_SWS_Pos)        /*!< 0x00000004 */
-#define RCC_CFGR_SWS_1                       (0x2UL << RCC_CFGR_SWS_Pos)        /*!< 0x00000008 */
-
-#define RCC_CFGR_SWS_MSI                     (0x00000000U)                     /*!< MSI oscillator used as system clock */
-#define RCC_CFGR_SWS_HSI                     (0x00000004U)                     /*!< HSI oscillator used as system clock */
-#define RCC_CFGR_SWS_HSE                     (0x00000008U)                     /*!< HSE oscillator used as system clock */
-#define RCC_CFGR_SWS_PLL                     (0x0000000CU)                     /*!< PLL used as system clock */
-
-/*!< HPRE configuration */
-#define RCC_CFGR_HPRE_Pos                    (4U)                              
-#define RCC_CFGR_HPRE_Msk                    (0xFUL << RCC_CFGR_HPRE_Pos)       /*!< 0x000000F0 */
-#define RCC_CFGR_HPRE                        RCC_CFGR_HPRE_Msk                 /*!< HPRE[3:0] bits (AHB prescaler) */
-#define RCC_CFGR_HPRE_0                      (0x1UL << RCC_CFGR_HPRE_Pos)       /*!< 0x00000010 */
-#define RCC_CFGR_HPRE_1                      (0x2UL << RCC_CFGR_HPRE_Pos)       /*!< 0x00000020 */
-#define RCC_CFGR_HPRE_2                      (0x4UL << RCC_CFGR_HPRE_Pos)       /*!< 0x00000040 */
-#define RCC_CFGR_HPRE_3                      (0x8UL << RCC_CFGR_HPRE_Pos)       /*!< 0x00000080 */
-
-#define RCC_CFGR_HPRE_DIV1                   (0x00000000U)                     /*!< SYSCLK not divided */
-#define RCC_CFGR_HPRE_DIV2                   (0x00000080U)                     /*!< SYSCLK divided by 2 */
-#define RCC_CFGR_HPRE_DIV4                   (0x00000090U)                     /*!< SYSCLK divided by 4 */
-#define RCC_CFGR_HPRE_DIV8                   (0x000000A0U)                     /*!< SYSCLK divided by 8 */
-#define RCC_CFGR_HPRE_DIV16                  (0x000000B0U)                     /*!< SYSCLK divided by 16 */
-#define RCC_CFGR_HPRE_DIV64                  (0x000000C0U)                     /*!< SYSCLK divided by 64 */
-#define RCC_CFGR_HPRE_DIV128                 (0x000000D0U)                     /*!< SYSCLK divided by 128 */
-#define RCC_CFGR_HPRE_DIV256                 (0x000000E0U)                     /*!< SYSCLK divided by 256 */
-#define RCC_CFGR_HPRE_DIV512                 (0x000000F0U)                     /*!< SYSCLK divided by 512 */
-
-/*!< PPRE1 configuration */
-#define RCC_CFGR_PPRE1_Pos                   (8U)                              
-#define RCC_CFGR_PPRE1_Msk                   (0x7UL << RCC_CFGR_PPRE1_Pos)      /*!< 0x00000700 */
-#define RCC_CFGR_PPRE1                       RCC_CFGR_PPRE1_Msk                /*!< PRE1[2:0] bits (APB1 prescaler) */
-#define RCC_CFGR_PPRE1_0                     (0x1UL << RCC_CFGR_PPRE1_Pos)      /*!< 0x00000100 */
-#define RCC_CFGR_PPRE1_1                     (0x2UL << RCC_CFGR_PPRE1_Pos)      /*!< 0x00000200 */
-#define RCC_CFGR_PPRE1_2                     (0x4UL << RCC_CFGR_PPRE1_Pos)      /*!< 0x00000400 */
-
-#define RCC_CFGR_PPRE1_DIV1                  (0x00000000U)                     /*!< HCLK not divided */
-#define RCC_CFGR_PPRE1_DIV2                  (0x00000400U)                     /*!< HCLK divided by 2 */
-#define RCC_CFGR_PPRE1_DIV4                  (0x00000500U)                     /*!< HCLK divided by 4 */
-#define RCC_CFGR_PPRE1_DIV8                  (0x00000600U)                     /*!< HCLK divided by 8 */
-#define RCC_CFGR_PPRE1_DIV16                 (0x00000700U)                     /*!< HCLK divided by 16 */
-
-/*!< PPRE2 configuration */
-#define RCC_CFGR_PPRE2_Pos                   (11U)                             
-#define RCC_CFGR_PPRE2_Msk                   (0x7UL << RCC_CFGR_PPRE2_Pos)      /*!< 0x00003800 */
-#define RCC_CFGR_PPRE2                       RCC_CFGR_PPRE2_Msk                /*!< PRE2[2:0] bits (APB2 prescaler) */
-#define RCC_CFGR_PPRE2_0                     (0x1UL << RCC_CFGR_PPRE2_Pos)      /*!< 0x00000800 */
-#define RCC_CFGR_PPRE2_1                     (0x2UL << RCC_CFGR_PPRE2_Pos)      /*!< 0x00001000 */
-#define RCC_CFGR_PPRE2_2                     (0x4UL << RCC_CFGR_PPRE2_Pos)      /*!< 0x00002000 */
-
-#define RCC_CFGR_PPRE2_DIV1                  (0x00000000U)                     /*!< HCLK not divided */
-#define RCC_CFGR_PPRE2_DIV2                  (0x00002000U)                     /*!< HCLK divided by 2 */
-#define RCC_CFGR_PPRE2_DIV4                  (0x00002800U)                     /*!< HCLK divided by 4 */
-#define RCC_CFGR_PPRE2_DIV8                  (0x00003000U)                     /*!< HCLK divided by 8 */
-#define RCC_CFGR_PPRE2_DIV16                 (0x00003800U)                     /*!< HCLK divided by 16 */
-
-#define RCC_CFGR_STOPWUCK_Pos                (15U)                             
-#define RCC_CFGR_STOPWUCK_Msk                (0x1UL << RCC_CFGR_STOPWUCK_Pos)   /*!< 0x00008000 */
-#define RCC_CFGR_STOPWUCK                    RCC_CFGR_STOPWUCK_Msk             /*!< Wake Up from Stop Clock selection */
-
-/*!< PLL entry clock source*/
-#define RCC_CFGR_PLLSRC_Pos                  (16U)                             
-#define RCC_CFGR_PLLSRC_Msk                  (0x1UL << RCC_CFGR_PLLSRC_Pos)     /*!< 0x00010000 */
-#define RCC_CFGR_PLLSRC                      RCC_CFGR_PLLSRC_Msk               /*!< PLL entry clock source */
-
-#define RCC_CFGR_PLLSRC_HSI                  (0x00000000U)                     /*!< HSI as PLL entry clock source */
-#define RCC_CFGR_PLLSRC_HSE                  (0x00010000U)                     /*!< HSE as PLL entry clock source */
-
-
-/*!< PLLMUL configuration */
-#define RCC_CFGR_PLLMUL_Pos                  (18U)                             
-#define RCC_CFGR_PLLMUL_Msk                  (0xFUL << RCC_CFGR_PLLMUL_Pos)     /*!< 0x003C0000 */
-#define RCC_CFGR_PLLMUL                      RCC_CFGR_PLLMUL_Msk               /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
-#define RCC_CFGR_PLLMUL_0                    (0x1UL << RCC_CFGR_PLLMUL_Pos)     /*!< 0x00040000 */
-#define RCC_CFGR_PLLMUL_1                    (0x2UL << RCC_CFGR_PLLMUL_Pos)     /*!< 0x00080000 */
-#define RCC_CFGR_PLLMUL_2                    (0x4UL << RCC_CFGR_PLLMUL_Pos)     /*!< 0x00100000 */
-#define RCC_CFGR_PLLMUL_3                    (0x8UL << RCC_CFGR_PLLMUL_Pos)     /*!< 0x00200000 */
-
-#define RCC_CFGR_PLLMUL3                     (0x00000000U)                     /*!< PLL input clock * 3 */
-#define RCC_CFGR_PLLMUL4                     (0x00040000U)                     /*!< PLL input clock * 4 */
-#define RCC_CFGR_PLLMUL6                     (0x00080000U)                     /*!< PLL input clock * 6 */
-#define RCC_CFGR_PLLMUL8                     (0x000C0000U)                     /*!< PLL input clock * 8 */
-#define RCC_CFGR_PLLMUL12                    (0x00100000U)                     /*!< PLL input clock * 12 */
-#define RCC_CFGR_PLLMUL16                    (0x00140000U)                     /*!< PLL input clock * 16 */
-#define RCC_CFGR_PLLMUL24                    (0x00180000U)                     /*!< PLL input clock * 24 */
-#define RCC_CFGR_PLLMUL32                    (0x001C0000U)                     /*!< PLL input clock * 32 */
-#define RCC_CFGR_PLLMUL48                    (0x00200000U)                     /*!< PLL input clock * 48 */
-
-/*!< PLLDIV configuration */
-#define RCC_CFGR_PLLDIV_Pos                  (22U)                             
-#define RCC_CFGR_PLLDIV_Msk                  (0x3UL << RCC_CFGR_PLLDIV_Pos)     /*!< 0x00C00000 */
-#define RCC_CFGR_PLLDIV                      RCC_CFGR_PLLDIV_Msk               /*!< PLLDIV[1:0] bits (PLL Output Division) */
-#define RCC_CFGR_PLLDIV_0                    (0x1UL << RCC_CFGR_PLLDIV_Pos)     /*!< 0x00400000 */
-#define RCC_CFGR_PLLDIV_1                    (0x2UL << RCC_CFGR_PLLDIV_Pos)     /*!< 0x00800000 */
-
-#define RCC_CFGR_PLLDIV2_Pos                 (22U)                             
-#define RCC_CFGR_PLLDIV2_Msk                 (0x1UL << RCC_CFGR_PLLDIV2_Pos)    /*!< 0x00400000 */
-#define RCC_CFGR_PLLDIV2                     RCC_CFGR_PLLDIV2_Msk              /*!< PLL clock output = CKVCO / 2 */
-#define RCC_CFGR_PLLDIV3_Pos                 (23U)                             
-#define RCC_CFGR_PLLDIV3_Msk                 (0x1UL << RCC_CFGR_PLLDIV3_Pos)    /*!< 0x00800000 */
-#define RCC_CFGR_PLLDIV3                     RCC_CFGR_PLLDIV3_Msk              /*!< PLL clock output = CKVCO / 3 */
-#define RCC_CFGR_PLLDIV4_Pos                 (22U)                             
-#define RCC_CFGR_PLLDIV4_Msk                 (0x3UL << RCC_CFGR_PLLDIV4_Pos)    /*!< 0x00C00000 */
-#define RCC_CFGR_PLLDIV4                     RCC_CFGR_PLLDIV4_Msk              /*!< PLL clock output = CKVCO / 4 */
-
-/*!< MCO configuration */
-#define RCC_CFGR_MCOSEL_Pos                  (24U)                             
-#define RCC_CFGR_MCOSEL_Msk                  (0xFUL << RCC_CFGR_MCOSEL_Pos)     /*!< 0x0F000000 */
-#define RCC_CFGR_MCOSEL                      RCC_CFGR_MCOSEL_Msk               /*!< MCO[3:0] bits (Microcontroller Clock Output) */
-#define RCC_CFGR_MCOSEL_0                    (0x1UL << RCC_CFGR_MCOSEL_Pos)     /*!< 0x01000000 */
-#define RCC_CFGR_MCOSEL_1                    (0x2UL << RCC_CFGR_MCOSEL_Pos)     /*!< 0x02000000 */
-#define RCC_CFGR_MCOSEL_2                    (0x4UL << RCC_CFGR_MCOSEL_Pos)     /*!< 0x04000000 */
-#define RCC_CFGR_MCOSEL_3                    (0x8UL << RCC_CFGR_MCOSEL_Pos)     /*!< 0x08000000 */
-
-#define RCC_CFGR_MCOSEL_NOCLOCK              (0x00000000U)                     /*!< No clock */
-#define RCC_CFGR_MCOSEL_SYSCLK_Pos           (24U)                             
-#define RCC_CFGR_MCOSEL_SYSCLK_Msk           (0x1UL << RCC_CFGR_MCOSEL_SYSCLK_Pos) /*!< 0x01000000 */
-#define RCC_CFGR_MCOSEL_SYSCLK               RCC_CFGR_MCOSEL_SYSCLK_Msk        /*!< System clock selected as MCO source */
-#define RCC_CFGR_MCOSEL_HSI_Pos              (25U)                             
-#define RCC_CFGR_MCOSEL_HSI_Msk              (0x1UL << RCC_CFGR_MCOSEL_HSI_Pos) /*!< 0x02000000 */
-#define RCC_CFGR_MCOSEL_HSI                  RCC_CFGR_MCOSEL_HSI_Msk           /*!< Internal 16 MHz RC oscillator clock selected */
-#define RCC_CFGR_MCOSEL_MSI_Pos              (24U)                             
-#define RCC_CFGR_MCOSEL_MSI_Msk              (0x3UL << RCC_CFGR_MCOSEL_MSI_Pos) /*!< 0x03000000 */
-#define RCC_CFGR_MCOSEL_MSI                  RCC_CFGR_MCOSEL_MSI_Msk           /*!< Internal Medium Speed RC oscillator clock selected */
-#define RCC_CFGR_MCOSEL_HSE_Pos              (26U)                             
-#define RCC_CFGR_MCOSEL_HSE_Msk              (0x1UL << RCC_CFGR_MCOSEL_HSE_Pos) /*!< 0x04000000 */
-#define RCC_CFGR_MCOSEL_HSE                  RCC_CFGR_MCOSEL_HSE_Msk           /*!< External 1-25 MHz oscillator clock selected */
-#define RCC_CFGR_MCOSEL_PLL_Pos              (24U)                             
-#define RCC_CFGR_MCOSEL_PLL_Msk              (0x5UL << RCC_CFGR_MCOSEL_PLL_Pos) /*!< 0x05000000 */
-#define RCC_CFGR_MCOSEL_PLL                  RCC_CFGR_MCOSEL_PLL_Msk           /*!< PLL clock divided */
-#define RCC_CFGR_MCOSEL_LSI_Pos              (25U)                             
-#define RCC_CFGR_MCOSEL_LSI_Msk              (0x3UL << RCC_CFGR_MCOSEL_LSI_Pos) /*!< 0x06000000 */
-#define RCC_CFGR_MCOSEL_LSI                  RCC_CFGR_MCOSEL_LSI_Msk           /*!< LSI selected */
-#define RCC_CFGR_MCOSEL_LSE_Pos              (24U)                             
-#define RCC_CFGR_MCOSEL_LSE_Msk              (0x7UL << RCC_CFGR_MCOSEL_LSE_Pos) /*!< 0x07000000 */
-#define RCC_CFGR_MCOSEL_LSE                  RCC_CFGR_MCOSEL_LSE_Msk           /*!< LSE selected */
-
-#define RCC_CFGR_MCOPRE_Pos                  (28U)                             
-#define RCC_CFGR_MCOPRE_Msk                  (0x7UL << RCC_CFGR_MCOPRE_Pos)     /*!< 0x70000000 */
-#define RCC_CFGR_MCOPRE                      RCC_CFGR_MCOPRE_Msk               /*!< MCO prescaler */
-#define RCC_CFGR_MCOPRE_0                    (0x1UL << RCC_CFGR_MCOPRE_Pos)     /*!< 0x10000000 */
-#define RCC_CFGR_MCOPRE_1                    (0x2UL << RCC_CFGR_MCOPRE_Pos)     /*!< 0x20000000 */
-#define RCC_CFGR_MCOPRE_2                    (0x4UL << RCC_CFGR_MCOPRE_Pos)     /*!< 0x40000000 */
-
-#define RCC_CFGR_MCOPRE_DIV1                 (0x00000000U)                     /*!< MCO is divided by 1 */
-#define RCC_CFGR_MCOPRE_DIV2                 (0x10000000U)                     /*!< MCO is divided by 2 */
-#define RCC_CFGR_MCOPRE_DIV4                 (0x20000000U)                     /*!< MCO is divided by 4 */
-#define RCC_CFGR_MCOPRE_DIV8                 (0x30000000U)                     /*!< MCO is divided by 8 */
-#define RCC_CFGR_MCOPRE_DIV16                (0x40000000U)                     /*!< MCO is divided by 16 */
-
-/* Legacy defines */
-#define RCC_CFGR_MCO_NOCLOCK   RCC_CFGR_MCOSEL_NOCLOCK   
-#define RCC_CFGR_MCO_SYSCLK    RCC_CFGR_MCOSEL_SYSCLK    
-#define RCC_CFGR_MCO_HSI       RCC_CFGR_MCOSEL_HSI       
-#define RCC_CFGR_MCO_MSI       RCC_CFGR_MCOSEL_MSI       
-#define RCC_CFGR_MCO_HSE       RCC_CFGR_MCOSEL_HSE       
-#define RCC_CFGR_MCO_PLL       RCC_CFGR_MCOSEL_PLL       
-#define RCC_CFGR_MCO_LSI       RCC_CFGR_MCOSEL_LSI       
-#define RCC_CFGR_MCO_LSE       RCC_CFGR_MCOSEL_LSE       
-#ifdef RCC_CFGR_MCOSEL_HSI48
-#define RCC_CFGR_MCO_HSI48     RCC_CFGR_MCOSEL_HSI48   
-#endif
-
-#define RCC_CFGR_MCO_PRE                    RCC_CFGR_MCOPRE          /*!< MCO prescaler */
-#define RCC_CFGR_MCO_PRE_1                  RCC_CFGR_MCOPRE_DIV1        /*!< MCO is divided by 1 */
-#define RCC_CFGR_MCO_PRE_2                  RCC_CFGR_MCOPRE_DIV2        /*!< MCO is divided by 1 */
-#define RCC_CFGR_MCO_PRE_4                  RCC_CFGR_MCOPRE_DIV4        /*!< MCO is divided by 1 */
-#define RCC_CFGR_MCO_PRE_8                  RCC_CFGR_MCOPRE_DIV8        /*!< MCO is divided by 1 */
-#define RCC_CFGR_MCO_PRE_16                 RCC_CFGR_MCOPRE_DIV16       /*!< MCO is divided by 1 */
-
-/*!<******************  Bit definition for RCC_CIER register  ********************/
-#define RCC_CIER_LSIRDYIE_Pos            (0U) 
-#define RCC_CIER_LSIRDYIE_Msk            (0x1UL << RCC_CIER_LSIRDYIE_Pos)       /*!< 0x00000001 */
-#define RCC_CIER_LSIRDYIE                RCC_CIER_LSIRDYIE_Msk                 /*!< LSI Ready Interrupt Enable */
-#define RCC_CIER_LSERDYIE_Pos            (1U) 
-#define RCC_CIER_LSERDYIE_Msk            (0x1UL << RCC_CIER_LSERDYIE_Pos)       /*!< 0x00000002 */
-#define RCC_CIER_LSERDYIE                RCC_CIER_LSERDYIE_Msk                 /*!< LSE Ready Interrupt Enable */
-#define RCC_CIER_HSIRDYIE_Pos            (2U) 
-#define RCC_CIER_HSIRDYIE_Msk            (0x1UL << RCC_CIER_HSIRDYIE_Pos)       /*!< 0x00000004 */
-#define RCC_CIER_HSIRDYIE                RCC_CIER_HSIRDYIE_Msk                 /*!< HSI Ready Interrupt Enable */
-#define RCC_CIER_HSERDYIE_Pos            (3U) 
-#define RCC_CIER_HSERDYIE_Msk            (0x1UL << RCC_CIER_HSERDYIE_Pos)       /*!< 0x00000008 */
-#define RCC_CIER_HSERDYIE                RCC_CIER_HSERDYIE_Msk                 /*!< HSE Ready Interrupt Enable */
-#define RCC_CIER_PLLRDYIE_Pos            (4U) 
-#define RCC_CIER_PLLRDYIE_Msk            (0x1UL << RCC_CIER_PLLRDYIE_Pos)       /*!< 0x00000010 */
-#define RCC_CIER_PLLRDYIE                RCC_CIER_PLLRDYIE_Msk                 /*!< PLL Ready Interrupt Enable */
-#define RCC_CIER_MSIRDYIE_Pos            (5U) 
-#define RCC_CIER_MSIRDYIE_Msk            (0x1UL << RCC_CIER_MSIRDYIE_Pos)       /*!< 0x00000020 */
-#define RCC_CIER_MSIRDYIE                RCC_CIER_MSIRDYIE_Msk                 /*!< MSI Ready Interrupt Enable */
-#define RCC_CIER_CSSLSE_Pos              (7U) 
-#define RCC_CIER_CSSLSE_Msk              (0x1UL << RCC_CIER_CSSLSE_Pos)         /*!< 0x00000080 */
-#define RCC_CIER_CSSLSE                  RCC_CIER_CSSLSE_Msk                   /*!< LSE CSS Interrupt Enable */
-
-/* Reference defines */
-#define RCC_CIER_LSECSSIE                    RCC_CIER_CSSLSE
-
-/*!<******************  Bit definition for RCC_CIFR register  ********************/
-#define RCC_CIFR_LSIRDYF_Pos             (0U) 
-#define RCC_CIFR_LSIRDYF_Msk             (0x1UL << RCC_CIFR_LSIRDYF_Pos)        /*!< 0x00000001 */
-#define RCC_CIFR_LSIRDYF                 RCC_CIFR_LSIRDYF_Msk                  /*!< LSI Ready Interrupt flag */
-#define RCC_CIFR_LSERDYF_Pos             (1U) 
-#define RCC_CIFR_LSERDYF_Msk             (0x1UL << RCC_CIFR_LSERDYF_Pos)        /*!< 0x00000002 */
-#define RCC_CIFR_LSERDYF                 RCC_CIFR_LSERDYF_Msk                  /*!< LSE Ready Interrupt flag */
-#define RCC_CIFR_HSIRDYF_Pos             (2U) 
-#define RCC_CIFR_HSIRDYF_Msk             (0x1UL << RCC_CIFR_HSIRDYF_Pos)        /*!< 0x00000004 */
-#define RCC_CIFR_HSIRDYF                 RCC_CIFR_HSIRDYF_Msk                  /*!< HSI Ready Interrupt flag */
-#define RCC_CIFR_HSERDYF_Pos             (3U) 
-#define RCC_CIFR_HSERDYF_Msk             (0x1UL << RCC_CIFR_HSERDYF_Pos)        /*!< 0x00000008 */
-#define RCC_CIFR_HSERDYF                 RCC_CIFR_HSERDYF_Msk                  /*!< HSE Ready Interrupt flag */
-#define RCC_CIFR_PLLRDYF_Pos             (4U) 
-#define RCC_CIFR_PLLRDYF_Msk             (0x1UL << RCC_CIFR_PLLRDYF_Pos)        /*!< 0x00000010 */
-#define RCC_CIFR_PLLRDYF                 RCC_CIFR_PLLRDYF_Msk                  /*!< PLL Ready Interrupt flag */
-#define RCC_CIFR_MSIRDYF_Pos             (5U) 
-#define RCC_CIFR_MSIRDYF_Msk             (0x1UL << RCC_CIFR_MSIRDYF_Pos)        /*!< 0x00000020 */
-#define RCC_CIFR_MSIRDYF                 RCC_CIFR_MSIRDYF_Msk                  /*!< MSI Ready Interrupt flag */
-#define RCC_CIFR_CSSLSEF_Pos             (7U) 
-#define RCC_CIFR_CSSLSEF_Msk             (0x1UL << RCC_CIFR_CSSLSEF_Pos)        /*!< 0x00000080 */
-#define RCC_CIFR_CSSLSEF                 RCC_CIFR_CSSLSEF_Msk                  /*!< LSE Clock Security System Interrupt flag */
-#define RCC_CIFR_CSSHSEF_Pos             (8U) 
-#define RCC_CIFR_CSSHSEF_Msk             (0x1UL << RCC_CIFR_CSSHSEF_Pos)        /*!< 0x00000100 */
-#define RCC_CIFR_CSSHSEF                 RCC_CIFR_CSSHSEF_Msk                  /*!< HSE Clock Security System Interrupt flag */
-
-/* Reference defines */
-#define RCC_CIFR_LSECSSF                    RCC_CIFR_CSSLSEF
-#define RCC_CIFR_CSSF                       RCC_CIFR_CSSHSEF
-
-/*!<******************  Bit definition for RCC_CICR register  ********************/
-#define RCC_CICR_LSIRDYC_Pos             (0U) 
-#define RCC_CICR_LSIRDYC_Msk             (0x1UL << RCC_CICR_LSIRDYC_Pos)        /*!< 0x00000001 */
-#define RCC_CICR_LSIRDYC                 RCC_CICR_LSIRDYC_Msk                  /*!< LSI Ready Interrupt Clear */
-#define RCC_CICR_LSERDYC_Pos             (1U) 
-#define RCC_CICR_LSERDYC_Msk             (0x1UL << RCC_CICR_LSERDYC_Pos)        /*!< 0x00000002 */
-#define RCC_CICR_LSERDYC                 RCC_CICR_LSERDYC_Msk                  /*!< LSE Ready Interrupt Clear */
-#define RCC_CICR_HSIRDYC_Pos             (2U) 
-#define RCC_CICR_HSIRDYC_Msk             (0x1UL << RCC_CICR_HSIRDYC_Pos)        /*!< 0x00000004 */
-#define RCC_CICR_HSIRDYC                 RCC_CICR_HSIRDYC_Msk                  /*!< HSI Ready Interrupt Clear */
-#define RCC_CICR_HSERDYC_Pos             (3U) 
-#define RCC_CICR_HSERDYC_Msk             (0x1UL << RCC_CICR_HSERDYC_Pos)        /*!< 0x00000008 */
-#define RCC_CICR_HSERDYC                 RCC_CICR_HSERDYC_Msk                  /*!< HSE Ready Interrupt Clear */
-#define RCC_CICR_PLLRDYC_Pos             (4U) 
-#define RCC_CICR_PLLRDYC_Msk             (0x1UL << RCC_CICR_PLLRDYC_Pos)        /*!< 0x00000010 */
-#define RCC_CICR_PLLRDYC                 RCC_CICR_PLLRDYC_Msk                  /*!< PLL Ready Interrupt Clear */
-#define RCC_CICR_MSIRDYC_Pos             (5U) 
-#define RCC_CICR_MSIRDYC_Msk             (0x1UL << RCC_CICR_MSIRDYC_Pos)        /*!< 0x00000020 */
-#define RCC_CICR_MSIRDYC                 RCC_CICR_MSIRDYC_Msk                  /*!< MSI Ready Interrupt Clear */
-#define RCC_CICR_CSSLSEC_Pos             (7U) 
-#define RCC_CICR_CSSLSEC_Msk             (0x1UL << RCC_CICR_CSSLSEC_Pos)        /*!< 0x00000080 */
-#define RCC_CICR_CSSLSEC                 RCC_CICR_CSSLSEC_Msk                  /*!< LSE Clock Security System Interrupt Clear */
-#define RCC_CICR_CSSHSEC_Pos             (8U) 
-#define RCC_CICR_CSSHSEC_Msk             (0x1UL << RCC_CICR_CSSHSEC_Pos)        /*!< 0x00000100 */
-#define RCC_CICR_CSSHSEC                 RCC_CICR_CSSHSEC_Msk                  /*!< HSE Clock Security System Interrupt Clear */
-
-/* Reference defines */
-#define RCC_CICR_LSECSSC                    RCC_CICR_CSSLSEC
-#define RCC_CICR_CSSC                       RCC_CICR_CSSHSEC
-/*****************  Bit definition for RCC_IOPRSTR register  ******************/
-#define RCC_IOPRSTR_IOPARST_Pos          (0U) 
-#define RCC_IOPRSTR_IOPARST_Msk          (0x1UL << RCC_IOPRSTR_IOPARST_Pos)     /*!< 0x00000001 */
-#define RCC_IOPRSTR_IOPARST              RCC_IOPRSTR_IOPARST_Msk               /*!< GPIO port A reset */
-#define RCC_IOPRSTR_IOPBRST_Pos          (1U) 
-#define RCC_IOPRSTR_IOPBRST_Msk          (0x1UL << RCC_IOPRSTR_IOPBRST_Pos)     /*!< 0x00000002 */
-#define RCC_IOPRSTR_IOPBRST              RCC_IOPRSTR_IOPBRST_Msk               /*!< GPIO port B reset */
-#define RCC_IOPRSTR_IOPCRST_Pos          (2U) 
-#define RCC_IOPRSTR_IOPCRST_Msk          (0x1UL << RCC_IOPRSTR_IOPCRST_Pos)     /*!< 0x00000004 */
-#define RCC_IOPRSTR_IOPCRST              RCC_IOPRSTR_IOPCRST_Msk               /*!< GPIO port C reset */
-#define RCC_IOPRSTR_IOPDRST_Pos          (3U) 
-#define RCC_IOPRSTR_IOPDRST_Msk          (0x1UL << RCC_IOPRSTR_IOPDRST_Pos)     /*!< 0x00000008 */
-#define RCC_IOPRSTR_IOPDRST              RCC_IOPRSTR_IOPDRST_Msk               /*!< GPIO port D reset */
-#define RCC_IOPRSTR_IOPHRST_Pos          (7U) 
-#define RCC_IOPRSTR_IOPHRST_Msk          (0x1UL << RCC_IOPRSTR_IOPHRST_Pos)     /*!< 0x00000080 */
-#define RCC_IOPRSTR_IOPHRST              RCC_IOPRSTR_IOPHRST_Msk               /*!< GPIO port H reset */
-
-/* Reference defines */
-#define RCC_IOPRSTR_GPIOARST                RCC_IOPRSTR_IOPARST        /*!< GPIO port A reset */
-#define RCC_IOPRSTR_GPIOBRST                RCC_IOPRSTR_IOPBRST        /*!< GPIO port B reset */
-#define RCC_IOPRSTR_GPIOCRST                RCC_IOPRSTR_IOPCRST        /*!< GPIO port C reset */
-#define RCC_IOPRSTR_GPIODRST                RCC_IOPRSTR_IOPDRST        /*!< GPIO port D reset */
-#define RCC_IOPRSTR_GPIOHRST                RCC_IOPRSTR_IOPHRST        /*!< GPIO port H reset */
-
-
-/******************  Bit definition for RCC_AHBRST register  ******************/
-#define RCC_AHBRSTR_DMARST_Pos           (0U) 
-#define RCC_AHBRSTR_DMARST_Msk           (0x1UL << RCC_AHBRSTR_DMARST_Pos)      /*!< 0x00000001 */
-#define RCC_AHBRSTR_DMARST               RCC_AHBRSTR_DMARST_Msk                /*!< DMA1 reset */
-#define RCC_AHBRSTR_MIFRST_Pos           (8U) 
-#define RCC_AHBRSTR_MIFRST_Msk           (0x1UL << RCC_AHBRSTR_MIFRST_Pos)      /*!< 0x00000100 */
-#define RCC_AHBRSTR_MIFRST               RCC_AHBRSTR_MIFRST_Msk                /*!< Memory interface reset */
-#define RCC_AHBRSTR_CRCRST_Pos           (12U)
-#define RCC_AHBRSTR_CRCRST_Msk           (0x1UL << RCC_AHBRSTR_CRCRST_Pos)      /*!< 0x00001000 */
-#define RCC_AHBRSTR_CRCRST               RCC_AHBRSTR_CRCRST_Msk                /*!< CRC reset */
-#define RCC_AHBRSTR_CRYPRST_Pos          (24U)
-#define RCC_AHBRSTR_CRYPRST_Msk          (0x1UL << RCC_AHBRSTR_CRYPRST_Pos)     /*!< 0x01000000 */
-#define RCC_AHBRSTR_CRYPRST              RCC_AHBRSTR_CRYPRST_Msk               /*!< Crypto reset */
-
-/* Reference defines */
-#define RCC_AHBRSTR_DMA1RST                 RCC_AHBRSTR_DMARST            /*!< DMA1 reset */
-
-/*****************  Bit definition for RCC_APB2RSTR register  *****************/
-#define RCC_APB2RSTR_SYSCFGRST_Pos       (0U) 
-#define RCC_APB2RSTR_SYSCFGRST_Msk       (0x1UL << RCC_APB2RSTR_SYSCFGRST_Pos)  /*!< 0x00000001 */
-#define RCC_APB2RSTR_SYSCFGRST           RCC_APB2RSTR_SYSCFGRST_Msk            /*!< SYSCFG reset */
-#define RCC_APB2RSTR_TIM21RST_Pos        (2U) 
-#define RCC_APB2RSTR_TIM21RST_Msk        (0x1UL << RCC_APB2RSTR_TIM21RST_Pos)   /*!< 0x00000004 */
-#define RCC_APB2RSTR_TIM21RST            RCC_APB2RSTR_TIM21RST_Msk             /*!< TIM21 reset */
-#define RCC_APB2RSTR_TIM22RST_Pos        (5U) 
-#define RCC_APB2RSTR_TIM22RST_Msk        (0x1UL << RCC_APB2RSTR_TIM22RST_Pos)   /*!< 0x00000020 */
-#define RCC_APB2RSTR_TIM22RST            RCC_APB2RSTR_TIM22RST_Msk             /*!< TIM22 reset */
-#define RCC_APB2RSTR_ADCRST_Pos          (9U) 
-#define RCC_APB2RSTR_ADCRST_Msk          (0x1UL << RCC_APB2RSTR_ADCRST_Pos)     /*!< 0x00000200 */
-#define RCC_APB2RSTR_ADCRST              RCC_APB2RSTR_ADCRST_Msk               /*!< ADC1 reset */
-#define RCC_APB2RSTR_SPI1RST_Pos         (12U)
-#define RCC_APB2RSTR_SPI1RST_Msk         (0x1UL << RCC_APB2RSTR_SPI1RST_Pos)    /*!< 0x00001000 */
-#define RCC_APB2RSTR_SPI1RST             RCC_APB2RSTR_SPI1RST_Msk              /*!< SPI1 reset */
-#define RCC_APB2RSTR_USART1RST_Pos       (14U)
-#define RCC_APB2RSTR_USART1RST_Msk       (0x1UL << RCC_APB2RSTR_USART1RST_Pos)  /*!< 0x00004000 */
-#define RCC_APB2RSTR_USART1RST           RCC_APB2RSTR_USART1RST_Msk            /*!< USART1 reset */
-#define RCC_APB2RSTR_DBGRST_Pos          (22U)
-#define RCC_APB2RSTR_DBGRST_Msk          (0x1UL << RCC_APB2RSTR_DBGRST_Pos)     /*!< 0x00400000 */
-#define RCC_APB2RSTR_DBGRST              RCC_APB2RSTR_DBGRST_Msk               /*!< DBGMCU reset */
-
-/* Reference defines */
-#define RCC_APB2RSTR_ADC1RST                RCC_APB2RSTR_ADCRST           /*!< ADC1 reset */
-#define RCC_APB2RSTR_DBGMCURST              RCC_APB2RSTR_DBGRST           /*!< DBGMCU reset */
-
-/*****************  Bit definition for RCC_APB1RSTR register  *****************/
-#define RCC_APB1RSTR_TIM2RST_Pos         (0U)
-#define RCC_APB1RSTR_TIM2RST_Msk         (0x1UL << RCC_APB1RSTR_TIM2RST_Pos)    /*!< 0x00000001 */
-#define RCC_APB1RSTR_TIM2RST             RCC_APB1RSTR_TIM2RST_Msk              /*!< Timer 2 reset */
-#define RCC_APB1RSTR_TIM6RST_Pos         (4U)
-#define RCC_APB1RSTR_TIM6RST_Msk         (0x1UL << RCC_APB1RSTR_TIM6RST_Pos)    /*!< 0x00000010 */
-#define RCC_APB1RSTR_TIM6RST             RCC_APB1RSTR_TIM6RST_Msk              /*!< Timer 6 reset */
-#define RCC_APB1RSTR_WWDGRST_Pos         (11U)
-#define RCC_APB1RSTR_WWDGRST_Msk         (0x1UL << RCC_APB1RSTR_WWDGRST_Pos)    /*!< 0x00000800 */
-#define RCC_APB1RSTR_WWDGRST             RCC_APB1RSTR_WWDGRST_Msk              /*!< Window Watchdog reset */
-#define RCC_APB1RSTR_SPI2RST_Pos         (14U)
-#define RCC_APB1RSTR_SPI2RST_Msk         (0x1UL << RCC_APB1RSTR_SPI2RST_Pos)    /*!< 0x00004000 */
-#define RCC_APB1RSTR_SPI2RST             RCC_APB1RSTR_SPI2RST_Msk              /*!< SPI2 reset */
-#define RCC_APB1RSTR_USART2RST_Pos       (17U)
-#define RCC_APB1RSTR_USART2RST_Msk       (0x1UL << RCC_APB1RSTR_USART2RST_Pos)  /*!< 0x00020000 */
-#define RCC_APB1RSTR_USART2RST           RCC_APB1RSTR_USART2RST_Msk            /*!< USART 2 reset */
-#define RCC_APB1RSTR_LPUART1RST_Pos      (18U)
-#define RCC_APB1RSTR_LPUART1RST_Msk      (0x1UL << RCC_APB1RSTR_LPUART1RST_Pos) /*!< 0x00040000 */
-#define RCC_APB1RSTR_LPUART1RST          RCC_APB1RSTR_LPUART1RST_Msk           /*!< LPUART1 reset */
-#define RCC_APB1RSTR_I2C1RST_Pos         (21U)
-#define RCC_APB1RSTR_I2C1RST_Msk         (0x1UL << RCC_APB1RSTR_I2C1RST_Pos)    /*!< 0x00200000 */
-#define RCC_APB1RSTR_I2C1RST             RCC_APB1RSTR_I2C1RST_Msk              /*!< I2C 1 reset */
-#define RCC_APB1RSTR_I2C2RST_Pos         (22U)
-#define RCC_APB1RSTR_I2C2RST_Msk         (0x1UL << RCC_APB1RSTR_I2C2RST_Pos)    /*!< 0x00400000 */
-#define RCC_APB1RSTR_I2C2RST             RCC_APB1RSTR_I2C2RST_Msk              /*!< I2C 2 reset */
-#define RCC_APB1RSTR_PWRRST_Pos          (28U)
-#define RCC_APB1RSTR_PWRRST_Msk          (0x1UL << RCC_APB1RSTR_PWRRST_Pos)     /*!< 0x10000000 */
-#define RCC_APB1RSTR_PWRRST              RCC_APB1RSTR_PWRRST_Msk               /*!< PWR reset */
-#define RCC_APB1RSTR_LPTIM1RST_Pos       (31U)
-#define RCC_APB1RSTR_LPTIM1RST_Msk       (0x1UL << RCC_APB1RSTR_LPTIM1RST_Pos)  /*!< 0x80000000 */
-#define RCC_APB1RSTR_LPTIM1RST           RCC_APB1RSTR_LPTIM1RST_Msk            /*!< LPTIM1 reset */
-
-/*****************  Bit definition for RCC_IOPENR register  ******************/
-#define RCC_IOPENR_IOPAEN_Pos            (0U) 
-#define RCC_IOPENR_IOPAEN_Msk            (0x1UL << RCC_IOPENR_IOPAEN_Pos)       /*!< 0x00000001 */
-#define RCC_IOPENR_IOPAEN                RCC_IOPENR_IOPAEN_Msk                 /*!< GPIO port A clock enable */
-#define RCC_IOPENR_IOPBEN_Pos            (1U) 
-#define RCC_IOPENR_IOPBEN_Msk            (0x1UL << RCC_IOPENR_IOPBEN_Pos)       /*!< 0x00000002 */
-#define RCC_IOPENR_IOPBEN                RCC_IOPENR_IOPBEN_Msk                 /*!< GPIO port B clock enable */
-#define RCC_IOPENR_IOPCEN_Pos            (2U) 
-#define RCC_IOPENR_IOPCEN_Msk            (0x1UL << RCC_IOPENR_IOPCEN_Pos)       /*!< 0x00000004 */
-#define RCC_IOPENR_IOPCEN                RCC_IOPENR_IOPCEN_Msk                 /*!< GPIO port C clock enable */
-#define RCC_IOPENR_IOPDEN_Pos            (3U) 
-#define RCC_IOPENR_IOPDEN_Msk            (0x1UL << RCC_IOPENR_IOPDEN_Pos)       /*!< 0x00000008 */
-#define RCC_IOPENR_IOPDEN                RCC_IOPENR_IOPDEN_Msk                 /*!< GPIO port D clock enable */
-#define RCC_IOPENR_IOPHEN_Pos            (7U) 
-#define RCC_IOPENR_IOPHEN_Msk            (0x1UL << RCC_IOPENR_IOPHEN_Pos)       /*!< 0x00000080 */
-#define RCC_IOPENR_IOPHEN                RCC_IOPENR_IOPHEN_Msk                 /*!< GPIO port H clock enable */
-
-/* Reference defines */
-#define RCC_IOPENR_GPIOAEN                  RCC_IOPENR_IOPAEN        /*!< GPIO port A clock enable */
-#define RCC_IOPENR_GPIOBEN                  RCC_IOPENR_IOPBEN        /*!< GPIO port B clock enable */
-#define RCC_IOPENR_GPIOCEN                  RCC_IOPENR_IOPCEN        /*!< GPIO port C clock enable */
-#define RCC_IOPENR_GPIODEN                  RCC_IOPENR_IOPDEN        /*!< GPIO port D clock enable */
-#define RCC_IOPENR_GPIOHEN                  RCC_IOPENR_IOPHEN        /*!< GPIO port H clock enable */
-
-/*****************  Bit definition for RCC_AHBENR register  ******************/
-#define RCC_AHBENR_DMAEN_Pos             (0U) 
-#define RCC_AHBENR_DMAEN_Msk             (0x1UL << RCC_AHBENR_DMAEN_Pos)        /*!< 0x00000001 */
-#define RCC_AHBENR_DMAEN                 RCC_AHBENR_DMAEN_Msk                  /*!< DMA1 clock enable */
-#define RCC_AHBENR_MIFEN_Pos             (8U) 
-#define RCC_AHBENR_MIFEN_Msk             (0x1UL << RCC_AHBENR_MIFEN_Pos)        /*!< 0x00000100 */
-#define RCC_AHBENR_MIFEN                 RCC_AHBENR_MIFEN_Msk                  /*!< NVM interface clock enable bit */
-#define RCC_AHBENR_CRCEN_Pos             (12U)
-#define RCC_AHBENR_CRCEN_Msk             (0x1UL << RCC_AHBENR_CRCEN_Pos)        /*!< 0x00001000 */
-#define RCC_AHBENR_CRCEN                 RCC_AHBENR_CRCEN_Msk                  /*!< CRC clock enable */
-#define RCC_AHBENR_CRYPEN_Pos            (24U)
-#define RCC_AHBENR_CRYPEN_Msk            (0x1UL << RCC_AHBENR_CRYPEN_Pos)       /*!< 0x01000000 */
-#define RCC_AHBENR_CRYPEN                RCC_AHBENR_CRYPEN_Msk                 /*!< Crypto clock enable*/
-
-/* Reference defines */
-#define RCC_AHBENR_DMA1EN                   RCC_AHBENR_DMAEN              /*!< DMA1 clock enable */
-
-/*****************  Bit definition for RCC_APB2ENR register  ******************/
-#define RCC_APB2ENR_SYSCFGEN_Pos         (0U) 
-#define RCC_APB2ENR_SYSCFGEN_Msk         (0x1UL << RCC_APB2ENR_SYSCFGEN_Pos)    /*!< 0x00000001 */
-#define RCC_APB2ENR_SYSCFGEN             RCC_APB2ENR_SYSCFGEN_Msk              /*!< SYSCFG clock enable */
-#define RCC_APB2ENR_TIM21EN_Pos          (2U) 
-#define RCC_APB2ENR_TIM21EN_Msk          (0x1UL << RCC_APB2ENR_TIM21EN_Pos)     /*!< 0x00000004 */
-#define RCC_APB2ENR_TIM21EN              RCC_APB2ENR_TIM21EN_Msk               /*!< TIM21 clock enable */
-#define RCC_APB2ENR_TIM22EN_Pos          (5U) 
-#define RCC_APB2ENR_TIM22EN_Msk          (0x1UL << RCC_APB2ENR_TIM22EN_Pos)     /*!< 0x00000020 */
-#define RCC_APB2ENR_TIM22EN              RCC_APB2ENR_TIM22EN_Msk               /*!< TIM22 clock enable */
-#define RCC_APB2ENR_FWEN_Pos             (7U) 
-#define RCC_APB2ENR_FWEN_Msk             (0x1UL << RCC_APB2ENR_FWEN_Pos)        /*!< 0x00000080 */
-#define RCC_APB2ENR_FWEN                 RCC_APB2ENR_FWEN_Msk                  /*!< MiFare Firewall clock enable */
-#define RCC_APB2ENR_ADCEN_Pos            (9U) 
-#define RCC_APB2ENR_ADCEN_Msk            (0x1UL << RCC_APB2ENR_ADCEN_Pos)       /*!< 0x00000200 */
-#define RCC_APB2ENR_ADCEN                RCC_APB2ENR_ADCEN_Msk                 /*!< ADC1 clock enable */
-#define RCC_APB2ENR_SPI1EN_Pos           (12U)
-#define RCC_APB2ENR_SPI1EN_Msk           (0x1UL << RCC_APB2ENR_SPI1EN_Pos)      /*!< 0x00001000 */
-#define RCC_APB2ENR_SPI1EN               RCC_APB2ENR_SPI1EN_Msk                /*!< SPI1 clock enable */
-#define RCC_APB2ENR_USART1EN_Pos         (14U)
-#define RCC_APB2ENR_USART1EN_Msk         (0x1UL << RCC_APB2ENR_USART1EN_Pos)    /*!< 0x00004000 */
-#define RCC_APB2ENR_USART1EN             RCC_APB2ENR_USART1EN_Msk              /*!< USART1 clock enable */
-#define RCC_APB2ENR_DBGEN_Pos            (22U)
-#define RCC_APB2ENR_DBGEN_Msk            (0x1UL << RCC_APB2ENR_DBGEN_Pos)       /*!< 0x00400000 */
-#define RCC_APB2ENR_DBGEN                RCC_APB2ENR_DBGEN_Msk                 /*!< DBGMCU clock enable */
-
-/* Reference defines */
-
-#define RCC_APB2ENR_MIFIEN                  RCC_APB2ENR_FWEN              /*!< MiFare Firewall clock enable */
-#define RCC_APB2ENR_ADC1EN                  RCC_APB2ENR_ADCEN             /*!< ADC1 clock enable */
-#define RCC_APB2ENR_DBGMCUEN                RCC_APB2ENR_DBGEN             /*!< DBGMCU clock enable */
-
-/*****************  Bit definition for RCC_APB1ENR register  ******************/
-#define RCC_APB1ENR_TIM2EN_Pos           (0U) 
-#define RCC_APB1ENR_TIM2EN_Msk           (0x1UL << RCC_APB1ENR_TIM2EN_Pos)      /*!< 0x00000001 */
-#define RCC_APB1ENR_TIM2EN               RCC_APB1ENR_TIM2EN_Msk                /*!< Timer 2 clock enable */
-#define RCC_APB1ENR_TIM6EN_Pos           (4U) 
-#define RCC_APB1ENR_TIM6EN_Msk           (0x1UL << RCC_APB1ENR_TIM6EN_Pos)      /*!< 0x00000010 */
-#define RCC_APB1ENR_TIM6EN               RCC_APB1ENR_TIM6EN_Msk                /*!< Timer 6 clock enable */
-#define RCC_APB1ENR_WWDGEN_Pos           (11U)
-#define RCC_APB1ENR_WWDGEN_Msk           (0x1UL << RCC_APB1ENR_WWDGEN_Pos)      /*!< 0x00000800 */
-#define RCC_APB1ENR_WWDGEN               RCC_APB1ENR_WWDGEN_Msk                /*!< Window Watchdog clock enable */
-#define RCC_APB1ENR_SPI2EN_Pos           (14U)
-#define RCC_APB1ENR_SPI2EN_Msk           (0x1UL << RCC_APB1ENR_SPI2EN_Pos)      /*!< 0x00004000 */
-#define RCC_APB1ENR_SPI2EN               RCC_APB1ENR_SPI2EN_Msk                /*!< SPI2 clock enable */
-#define RCC_APB1ENR_USART2EN_Pos         (17U)
-#define RCC_APB1ENR_USART2EN_Msk         (0x1UL << RCC_APB1ENR_USART2EN_Pos)    /*!< 0x00020000 */
-#define RCC_APB1ENR_USART2EN             RCC_APB1ENR_USART2EN_Msk              /*!< USART2 clock enable */
-#define RCC_APB1ENR_LPUART1EN_Pos        (18U)
-#define RCC_APB1ENR_LPUART1EN_Msk        (0x1UL << RCC_APB1ENR_LPUART1EN_Pos)   /*!< 0x00040000 */
-#define RCC_APB1ENR_LPUART1EN            RCC_APB1ENR_LPUART1EN_Msk             /*!< LPUART1 clock enable */
-#define RCC_APB1ENR_I2C1EN_Pos           (21U)
-#define RCC_APB1ENR_I2C1EN_Msk           (0x1UL << RCC_APB1ENR_I2C1EN_Pos)      /*!< 0x00200000 */
-#define RCC_APB1ENR_I2C1EN               RCC_APB1ENR_I2C1EN_Msk                /*!< I2C1 clock enable */
-#define RCC_APB1ENR_I2C2EN_Pos           (22U)
-#define RCC_APB1ENR_I2C2EN_Msk           (0x1UL << RCC_APB1ENR_I2C2EN_Pos)      /*!< 0x00400000 */
-#define RCC_APB1ENR_I2C2EN               RCC_APB1ENR_I2C2EN_Msk                /*!< I2C2 clock enable */
-#define RCC_APB1ENR_PWREN_Pos            (28U)
-#define RCC_APB1ENR_PWREN_Msk            (0x1UL << RCC_APB1ENR_PWREN_Pos)       /*!< 0x10000000 */
-#define RCC_APB1ENR_PWREN                RCC_APB1ENR_PWREN_Msk                 /*!< PWR clock enable */
-#define RCC_APB1ENR_LPTIM1EN_Pos         (31U)
-#define RCC_APB1ENR_LPTIM1EN_Msk         (0x1UL << RCC_APB1ENR_LPTIM1EN_Pos)    /*!< 0x80000000 */
-#define RCC_APB1ENR_LPTIM1EN             RCC_APB1ENR_LPTIM1EN_Msk              /*!< LPTIM1 clock enable */
-
-/******************  Bit definition for RCC_IOPSMENR register  ****************/
-#define RCC_IOPSMENR_IOPASMEN_Pos        (0U) 
-#define RCC_IOPSMENR_IOPASMEN_Msk        (0x1UL << RCC_IOPSMENR_IOPASMEN_Pos)   /*!< 0x00000001 */
-#define RCC_IOPSMENR_IOPASMEN            RCC_IOPSMENR_IOPASMEN_Msk             /*!< GPIO port A clock enabled in sleep mode */
-#define RCC_IOPSMENR_IOPBSMEN_Pos        (1U) 
-#define RCC_IOPSMENR_IOPBSMEN_Msk        (0x1UL << RCC_IOPSMENR_IOPBSMEN_Pos)   /*!< 0x00000002 */
-#define RCC_IOPSMENR_IOPBSMEN            RCC_IOPSMENR_IOPBSMEN_Msk             /*!< GPIO port B clock enabled in sleep mode */
-#define RCC_IOPSMENR_IOPCSMEN_Pos        (2U) 
-#define RCC_IOPSMENR_IOPCSMEN_Msk        (0x1UL << RCC_IOPSMENR_IOPCSMEN_Pos)   /*!< 0x00000004 */
-#define RCC_IOPSMENR_IOPCSMEN            RCC_IOPSMENR_IOPCSMEN_Msk             /*!< GPIO port C clock enabled in sleep mode */
-#define RCC_IOPSMENR_IOPDSMEN_Pos        (3U) 
-#define RCC_IOPSMENR_IOPDSMEN_Msk        (0x1UL << RCC_IOPSMENR_IOPDSMEN_Pos)   /*!< 0x00000008 */
-#define RCC_IOPSMENR_IOPDSMEN            RCC_IOPSMENR_IOPDSMEN_Msk             /*!< GPIO port D clock enabled in sleep mode */
-#define RCC_IOPSMENR_IOPHSMEN_Pos        (7U) 
-#define RCC_IOPSMENR_IOPHSMEN_Msk        (0x1UL << RCC_IOPSMENR_IOPHSMEN_Pos)   /*!< 0x00000080 */
-#define RCC_IOPSMENR_IOPHSMEN            RCC_IOPSMENR_IOPHSMEN_Msk             /*!< GPIO port H clock enabled in sleep mode */
-
-/* Reference defines */
-#define RCC_IOPSMENR_GPIOASMEN              RCC_IOPSMENR_IOPASMEN        /*!< GPIO port A clock enabled in sleep mode */
-#define RCC_IOPSMENR_GPIOBSMEN              RCC_IOPSMENR_IOPBSMEN        /*!< GPIO port B clock enabled in sleep mode */
-#define RCC_IOPSMENR_GPIOCSMEN              RCC_IOPSMENR_IOPCSMEN        /*!< GPIO port C clock enabled in sleep mode */
-#define RCC_IOPSMENR_GPIODSMEN              RCC_IOPSMENR_IOPDSMEN        /*!< GPIO port D clock enabled in sleep mode */
-#define RCC_IOPSMENR_GPIOHSMEN              RCC_IOPSMENR_IOPHSMEN        /*!< GPIO port H clock enabled in sleep mode */
-
-/*****************  Bit definition for RCC_AHBSMENR register  ******************/
-#define RCC_AHBSMENR_DMASMEN_Pos         (0U) 
-#define RCC_AHBSMENR_DMASMEN_Msk         (0x1UL << RCC_AHBSMENR_DMASMEN_Pos)    /*!< 0x00000001 */
-#define RCC_AHBSMENR_DMASMEN             RCC_AHBSMENR_DMASMEN_Msk              /*!< DMA1 clock enabled in sleep mode */
-#define RCC_AHBSMENR_MIFSMEN_Pos         (8U) 
-#define RCC_AHBSMENR_MIFSMEN_Msk         (0x1UL << RCC_AHBSMENR_MIFSMEN_Pos)    /*!< 0x00000100 */
-#define RCC_AHBSMENR_MIFSMEN             RCC_AHBSMENR_MIFSMEN_Msk              /*!< NVM interface clock enable during sleep mode */
-#define RCC_AHBSMENR_SRAMSMEN_Pos        (9U) 
-#define RCC_AHBSMENR_SRAMSMEN_Msk        (0x1UL << RCC_AHBSMENR_SRAMSMEN_Pos)   /*!< 0x00000200 */
-#define RCC_AHBSMENR_SRAMSMEN            RCC_AHBSMENR_SRAMSMEN_Msk             /*!< SRAM clock enabled in sleep mode */
-#define RCC_AHBSMENR_CRCSMEN_Pos         (12U)
-#define RCC_AHBSMENR_CRCSMEN_Msk         (0x1UL << RCC_AHBSMENR_CRCSMEN_Pos)    /*!< 0x00001000 */
-#define RCC_AHBSMENR_CRCSMEN             RCC_AHBSMENR_CRCSMEN_Msk              /*!< CRC clock enabled in sleep mode */
-#define RCC_AHBSMENR_CRYPSMEN_Pos        (24U)
-#define RCC_AHBSMENR_CRYPSMEN_Msk        (0x1UL << RCC_AHBSMENR_CRYPSMEN_Pos)   /*!< 0x01000000 */
-#define RCC_AHBSMENR_CRYPSMEN            RCC_AHBSMENR_CRYPSMEN_Msk             /*!< Crypto clock enabled in sleep mode */
-
-/* Reference defines */
-#define RCC_AHBSMENR_DMA1SMEN               RCC_AHBSMENR_DMASMEN          /*!< DMA1 clock enabled in sleep mode */
-
-/*****************  Bit definition for RCC_APB2SMENR register  ******************/
-#define RCC_APB2SMENR_SYSCFGSMEN_Pos     (0U) 
-#define RCC_APB2SMENR_SYSCFGSMEN_Msk     (0x1UL << RCC_APB2SMENR_SYSCFGSMEN_Pos) /*!< 0x00000001 */
-#define RCC_APB2SMENR_SYSCFGSMEN         RCC_APB2SMENR_SYSCFGSMEN_Msk          /*!< SYSCFG clock enabled in sleep mode */
-#define RCC_APB2SMENR_TIM21SMEN_Pos      (2U) 
-#define RCC_APB2SMENR_TIM21SMEN_Msk      (0x1UL << RCC_APB2SMENR_TIM21SMEN_Pos) /*!< 0x00000004 */
-#define RCC_APB2SMENR_TIM21SMEN          RCC_APB2SMENR_TIM21SMEN_Msk           /*!< TIM21 clock enabled in sleep mode */
-#define RCC_APB2SMENR_TIM22SMEN_Pos      (5U) 
-#define RCC_APB2SMENR_TIM22SMEN_Msk      (0x1UL << RCC_APB2SMENR_TIM22SMEN_Pos) /*!< 0x00000020 */
-#define RCC_APB2SMENR_TIM22SMEN          RCC_APB2SMENR_TIM22SMEN_Msk           /*!< TIM22 clock enabled in sleep mode */
-#define RCC_APB2SMENR_ADCSMEN_Pos        (9U) 
-#define RCC_APB2SMENR_ADCSMEN_Msk        (0x1UL << RCC_APB2SMENR_ADCSMEN_Pos)   /*!< 0x00000200 */
-#define RCC_APB2SMENR_ADCSMEN            RCC_APB2SMENR_ADCSMEN_Msk             /*!< ADC1 clock enabled in sleep mode */
-#define RCC_APB2SMENR_SPI1SMEN_Pos       (12U)
-#define RCC_APB2SMENR_SPI1SMEN_Msk       (0x1UL << RCC_APB2SMENR_SPI1SMEN_Pos)  /*!< 0x00001000 */
-#define RCC_APB2SMENR_SPI1SMEN           RCC_APB2SMENR_SPI1SMEN_Msk            /*!< SPI1 clock enabled in sleep mode */
-#define RCC_APB2SMENR_USART1SMEN_Pos     (14U)
-#define RCC_APB2SMENR_USART1SMEN_Msk     (0x1UL << RCC_APB2SMENR_USART1SMEN_Pos) /*!< 0x00004000 */
-#define RCC_APB2SMENR_USART1SMEN         RCC_APB2SMENR_USART1SMEN_Msk          /*!< USART1 clock enabled in sleep mode */
-#define RCC_APB2SMENR_DBGSMEN_Pos        (22U)
-#define RCC_APB2SMENR_DBGSMEN_Msk        (0x1UL << RCC_APB2SMENR_DBGSMEN_Pos)   /*!< 0x00400000 */
-#define RCC_APB2SMENR_DBGSMEN            RCC_APB2SMENR_DBGSMEN_Msk             /*!< DBGMCU clock enabled in sleep mode */
-
-/* Reference defines */
-#define RCC_APB2SMENR_ADC1SMEN              RCC_APB2SMENR_ADCSMEN         /*!< ADC1 clock enabled in sleep mode */
-#define RCC_APB2SMENR_DBGMCUSMEN            RCC_APB2SMENR_DBGSMEN         /*!< DBGMCU clock enabled in sleep mode */
-
-/*****************  Bit definition for RCC_APB1SMENR register  ******************/
-#define RCC_APB1SMENR_TIM2SMEN_Pos       (0U) 
-#define RCC_APB1SMENR_TIM2SMEN_Msk       (0x1UL << RCC_APB1SMENR_TIM2SMEN_Pos)  /*!< 0x00000001 */
-#define RCC_APB1SMENR_TIM2SMEN           RCC_APB1SMENR_TIM2SMEN_Msk            /*!< Timer 2 clock enabled in sleep mode */
-#define RCC_APB1SMENR_TIM6SMEN_Pos       (4U) 
-#define RCC_APB1SMENR_TIM6SMEN_Msk       (0x1UL << RCC_APB1SMENR_TIM6SMEN_Pos)  /*!< 0x00000010 */
-#define RCC_APB1SMENR_TIM6SMEN           RCC_APB1SMENR_TIM6SMEN_Msk            /*!< Timer 6 clock enabled in sleep mode */
-#define RCC_APB1SMENR_WWDGSMEN_Pos       (11U)
-#define RCC_APB1SMENR_WWDGSMEN_Msk       (0x1UL << RCC_APB1SMENR_WWDGSMEN_Pos)  /*!< 0x00000800 */
-#define RCC_APB1SMENR_WWDGSMEN           RCC_APB1SMENR_WWDGSMEN_Msk            /*!< Window Watchdog clock enabled in sleep mode */
-#define RCC_APB1SMENR_SPI2SMEN_Pos       (14U)
-#define RCC_APB1SMENR_SPI2SMEN_Msk       (0x1UL << RCC_APB1SMENR_SPI2SMEN_Pos)  /*!< 0x00004000 */
-#define RCC_APB1SMENR_SPI2SMEN           RCC_APB1SMENR_SPI2SMEN_Msk            /*!< SPI2 clock enabled in sleep mode */
-#define RCC_APB1SMENR_USART2SMEN_Pos     (17U)
-#define RCC_APB1SMENR_USART2SMEN_Msk     (0x1UL << RCC_APB1SMENR_USART2SMEN_Pos) /*!< 0x00020000 */
-#define RCC_APB1SMENR_USART2SMEN         RCC_APB1SMENR_USART2SMEN_Msk          /*!< USART2 clock enabled in sleep mode */
-#define RCC_APB1SMENR_LPUART1SMEN_Pos    (18U)
-#define RCC_APB1SMENR_LPUART1SMEN_Msk    (0x1UL << RCC_APB1SMENR_LPUART1SMEN_Pos) /*!< 0x00040000 */
-#define RCC_APB1SMENR_LPUART1SMEN        RCC_APB1SMENR_LPUART1SMEN_Msk         /*!< LPUART1 clock enabled in sleep mode */
-#define RCC_APB1SMENR_I2C1SMEN_Pos       (21U)
-#define RCC_APB1SMENR_I2C1SMEN_Msk       (0x1UL << RCC_APB1SMENR_I2C1SMEN_Pos)  /*!< 0x00200000 */
-#define RCC_APB1SMENR_I2C1SMEN           RCC_APB1SMENR_I2C1SMEN_Msk            /*!< I2C1 clock enabled in sleep mode */
-#define RCC_APB1SMENR_I2C2SMEN_Pos       (22U)
-#define RCC_APB1SMENR_I2C2SMEN_Msk       (0x1UL << RCC_APB1SMENR_I2C2SMEN_Pos)  /*!< 0x00400000 */
-#define RCC_APB1SMENR_I2C2SMEN           RCC_APB1SMENR_I2C2SMEN_Msk            /*!< I2C2 clock enabled in sleep mode */
-#define RCC_APB1SMENR_PWRSMEN_Pos        (28U)
-#define RCC_APB1SMENR_PWRSMEN_Msk        (0x1UL << RCC_APB1SMENR_PWRSMEN_Pos)   /*!< 0x10000000 */
-#define RCC_APB1SMENR_PWRSMEN            RCC_APB1SMENR_PWRSMEN_Msk             /*!< PWR clock enabled in sleep mode */
-#define RCC_APB1SMENR_LPTIM1SMEN_Pos     (31U)
-#define RCC_APB1SMENR_LPTIM1SMEN_Msk     (0x1UL << RCC_APB1SMENR_LPTIM1SMEN_Pos) /*!< 0x80000000 */
-#define RCC_APB1SMENR_LPTIM1SMEN         RCC_APB1SMENR_LPTIM1SMEN_Msk          /*!< LPTIM1 clock enabled in sleep mode */
-
-/*******************  Bit definition for RCC_CCIPR register  *******************/
-/*!< USART1 Clock source selection */
-#define RCC_CCIPR_USART1SEL_Pos          (0U) 
-#define RCC_CCIPR_USART1SEL_Msk          (0x3UL << RCC_CCIPR_USART1SEL_Pos)     /*!< 0x00000003 */
-#define RCC_CCIPR_USART1SEL              RCC_CCIPR_USART1SEL_Msk               /*!< USART1SEL[1:0] bits */
-#define RCC_CCIPR_USART1SEL_0            (0x1UL << RCC_CCIPR_USART1SEL_Pos)     /*!< 0x00000001 */
-#define RCC_CCIPR_USART1SEL_1            (0x2UL << RCC_CCIPR_USART1SEL_Pos)     /*!< 0x00000002 */
-
-/*!< USART2 Clock source selection */
-#define RCC_CCIPR_USART2SEL_Pos          (2U) 
-#define RCC_CCIPR_USART2SEL_Msk          (0x3UL << RCC_CCIPR_USART2SEL_Pos)     /*!< 0x0000000C */
-#define RCC_CCIPR_USART2SEL              RCC_CCIPR_USART2SEL_Msk               /*!< USART2SEL[1:0] bits */
-#define RCC_CCIPR_USART2SEL_0            (0x1UL << RCC_CCIPR_USART2SEL_Pos)     /*!< 0x00000004 */
-#define RCC_CCIPR_USART2SEL_1            (0x2UL << RCC_CCIPR_USART2SEL_Pos)     /*!< 0x00000008 */
-
-/*!< LPUART1 Clock source selection */ 
-#define RCC_CCIPR_LPUART1SEL_Pos         (10U)
-#define RCC_CCIPR_LPUART1SEL_Msk         (0x3UL << RCC_CCIPR_LPUART1SEL_Pos)    /*!< 0x00000C00 */
-#define RCC_CCIPR_LPUART1SEL             RCC_CCIPR_LPUART1SEL_Msk              /*!< LPUART1SEL[1:0] bits */
-#define RCC_CCIPR_LPUART1SEL_0           (0x1UL << RCC_CCIPR_LPUART1SEL_Pos)    /*!< 0x0000400 */
-#define RCC_CCIPR_LPUART1SEL_1           (0x2UL << RCC_CCIPR_LPUART1SEL_Pos)    /*!< 0x0000800 */
-
-/*!< I2C1 Clock source selection */
-#define RCC_CCIPR_I2C1SEL_Pos            (12U)
-#define RCC_CCIPR_I2C1SEL_Msk            (0x3UL << RCC_CCIPR_I2C1SEL_Pos)       /*!< 0x00003000 */
-#define RCC_CCIPR_I2C1SEL                RCC_CCIPR_I2C1SEL_Msk                 /*!< I2C1SEL [1:0] bits */
-#define RCC_CCIPR_I2C1SEL_0              (0x1UL << RCC_CCIPR_I2C1SEL_Pos)       /*!< 0x00001000 */
-#define RCC_CCIPR_I2C1SEL_1              (0x2UL << RCC_CCIPR_I2C1SEL_Pos)       /*!< 0x00002000 */
-
-
-/*!< LPTIM1 Clock source selection */ 
-#define RCC_CCIPR_LPTIM1SEL_Pos          (18U)
-#define RCC_CCIPR_LPTIM1SEL_Msk          (0x3UL << RCC_CCIPR_LPTIM1SEL_Pos)     /*!< 0x000C0000 */
-#define RCC_CCIPR_LPTIM1SEL              RCC_CCIPR_LPTIM1SEL_Msk               /*!< LPTIM1SEL [1:0] bits */
-#define RCC_CCIPR_LPTIM1SEL_0            (0x1UL << RCC_CCIPR_LPTIM1SEL_Pos)     /*!< 0x00040000 */
-#define RCC_CCIPR_LPTIM1SEL_1            (0x2UL << RCC_CCIPR_LPTIM1SEL_Pos)     /*!< 0x00080000 */
-
-/*******************  Bit definition for RCC_CSR register  *******************/
-#define RCC_CSR_LSION_Pos                (0U) 
-#define RCC_CSR_LSION_Msk                (0x1UL << RCC_CSR_LSION_Pos)           /*!< 0x00000001 */
-#define RCC_CSR_LSION                    RCC_CSR_LSION_Msk                     /*!< Internal Low Speed oscillator enable */
-#define RCC_CSR_LSIRDY_Pos               (1U) 
-#define RCC_CSR_LSIRDY_Msk               (0x1UL << RCC_CSR_LSIRDY_Pos)          /*!< 0x00000002 */
-#define RCC_CSR_LSIRDY                   RCC_CSR_LSIRDY_Msk                    /*!< Internal Low Speed oscillator Ready */
-
-#define RCC_CSR_LSEON_Pos                (8U) 
-#define RCC_CSR_LSEON_Msk                (0x1UL << RCC_CSR_LSEON_Pos)           /*!< 0x00000100 */
-#define RCC_CSR_LSEON                    RCC_CSR_LSEON_Msk                     /*!< External Low Speed oscillator enable */
-#define RCC_CSR_LSERDY_Pos               (9U) 
-#define RCC_CSR_LSERDY_Msk               (0x1UL << RCC_CSR_LSERDY_Pos)          /*!< 0x00000200 */
-#define RCC_CSR_LSERDY                   RCC_CSR_LSERDY_Msk                    /*!< External Low Speed oscillator Ready */
-#define RCC_CSR_LSEBYP_Pos               (10U)
-#define RCC_CSR_LSEBYP_Msk               (0x1UL << RCC_CSR_LSEBYP_Pos)          /*!< 0x00000400 */
-#define RCC_CSR_LSEBYP                   RCC_CSR_LSEBYP_Msk                    /*!< External Low Speed oscillator Bypass */
-                                             
-#define RCC_CSR_LSEDRV_Pos               (11U)
-#define RCC_CSR_LSEDRV_Msk               (0x3UL << RCC_CSR_LSEDRV_Pos)          /*!< 0x00001800 */
-#define RCC_CSR_LSEDRV                   RCC_CSR_LSEDRV_Msk                    /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
-#define RCC_CSR_LSEDRV_0                 (0x1UL << RCC_CSR_LSEDRV_Pos)          /*!< 0x00000800 */
-#define RCC_CSR_LSEDRV_1                 (0x2UL << RCC_CSR_LSEDRV_Pos)          /*!< 0x00001000 */
-                                             
-#define RCC_CSR_LSECSSON_Pos             (13U)
-#define RCC_CSR_LSECSSON_Msk             (0x1UL << RCC_CSR_LSECSSON_Pos)        /*!< 0x00002000 */
-#define RCC_CSR_LSECSSON                 RCC_CSR_LSECSSON_Msk                  /*!< External Low Speed oscillator CSS Enable */
-#define RCC_CSR_LSECSSD_Pos              (14U)
-#define RCC_CSR_LSECSSD_Msk              (0x1UL << RCC_CSR_LSECSSD_Pos)         /*!< 0x00004000 */
-#define RCC_CSR_LSECSSD                  RCC_CSR_LSECSSD_Msk                   /*!< External Low Speed oscillator CSS Detected */
-                                             
-/*!< RTC congiguration */                    
-#define RCC_CSR_RTCSEL_Pos               (16U)
-#define RCC_CSR_RTCSEL_Msk               (0x3UL << RCC_CSR_RTCSEL_Pos)          /*!< 0x00030000 */
-#define RCC_CSR_RTCSEL                   RCC_CSR_RTCSEL_Msk                    /*!< RTCSEL[1:0] bits (RTC clock source selection) */
-#define RCC_CSR_RTCSEL_0                 (0x1UL << RCC_CSR_RTCSEL_Pos)          /*!< 0x00010000 */
-#define RCC_CSR_RTCSEL_1                 (0x2UL << RCC_CSR_RTCSEL_Pos)          /*!< 0x00020000 */
-                                             
-#define RCC_CSR_RTCSEL_NOCLOCK               (0x00000000U)                     /*!< No clock */
-#define RCC_CSR_RTCSEL_LSE_Pos           (16U)
-#define RCC_CSR_RTCSEL_LSE_Msk           (0x1UL << RCC_CSR_RTCSEL_LSE_Pos)      /*!< 0x00010000 */
-#define RCC_CSR_RTCSEL_LSE               RCC_CSR_RTCSEL_LSE_Msk                /*!< LSE oscillator clock used as RTC clock */
-#define RCC_CSR_RTCSEL_LSI_Pos           (17U)
-#define RCC_CSR_RTCSEL_LSI_Msk           (0x1UL << RCC_CSR_RTCSEL_LSI_Pos)      /*!< 0x00020000 */
-#define RCC_CSR_RTCSEL_LSI               RCC_CSR_RTCSEL_LSI_Msk                /*!< LSI oscillator clock used as RTC clock */
-#define RCC_CSR_RTCSEL_HSE_Pos           (16U)
-#define RCC_CSR_RTCSEL_HSE_Msk           (0x3UL << RCC_CSR_RTCSEL_HSE_Pos)      /*!< 0x00030000 */
-#define RCC_CSR_RTCSEL_HSE               RCC_CSR_RTCSEL_HSE_Msk                /*!< HSE oscillator clock used as RTC clock */
-                                             
-#define RCC_CSR_RTCEN_Pos                (18U)
-#define RCC_CSR_RTCEN_Msk                (0x1UL << RCC_CSR_RTCEN_Pos)           /*!< 0x00040000 */
-#define RCC_CSR_RTCEN                    RCC_CSR_RTCEN_Msk                     /*!< RTC clock enable */
-#define RCC_CSR_RTCRST_Pos               (19U)
-#define RCC_CSR_RTCRST_Msk               (0x1UL << RCC_CSR_RTCRST_Pos)          /*!< 0x00080000 */
-#define RCC_CSR_RTCRST                   RCC_CSR_RTCRST_Msk                    /*!< RTC software reset  */
-
-#define RCC_CSR_RMVF_Pos                 (23U)
-#define RCC_CSR_RMVF_Msk                 (0x1UL << RCC_CSR_RMVF_Pos)            /*!< 0x00800000 */
-#define RCC_CSR_RMVF                     RCC_CSR_RMVF_Msk                      /*!< Remove reset flag */
-#define RCC_CSR_FWRSTF_Pos               (24U)
-#define RCC_CSR_FWRSTF_Msk               (0x1UL << RCC_CSR_FWRSTF_Pos)          /*!< 0x01000000 */
-#define RCC_CSR_FWRSTF                   RCC_CSR_FWRSTF_Msk                    /*!< Mifare Firewall reset flag */
-#define RCC_CSR_OBLRSTF_Pos              (25U)
-#define RCC_CSR_OBLRSTF_Msk              (0x1UL << RCC_CSR_OBLRSTF_Pos)         /*!< 0x02000000 */
-#define RCC_CSR_OBLRSTF                  RCC_CSR_OBLRSTF_Msk                   /*!< OBL reset flag */
-#define RCC_CSR_PINRSTF_Pos              (26U)
-#define RCC_CSR_PINRSTF_Msk              (0x1UL << RCC_CSR_PINRSTF_Pos)         /*!< 0x04000000 */
-#define RCC_CSR_PINRSTF                  RCC_CSR_PINRSTF_Msk                   /*!< PIN reset flag */
-#define RCC_CSR_PORRSTF_Pos              (27U)
-#define RCC_CSR_PORRSTF_Msk              (0x1UL << RCC_CSR_PORRSTF_Pos)         /*!< 0x08000000 */
-#define RCC_CSR_PORRSTF                  RCC_CSR_PORRSTF_Msk                   /*!< POR/PDR reset flag */
-#define RCC_CSR_SFTRSTF_Pos              (28U)
-#define RCC_CSR_SFTRSTF_Msk              (0x1UL << RCC_CSR_SFTRSTF_Pos)         /*!< 0x10000000 */
-#define RCC_CSR_SFTRSTF                  RCC_CSR_SFTRSTF_Msk                   /*!< Software Reset flag */
-#define RCC_CSR_IWDGRSTF_Pos             (29U)
-#define RCC_CSR_IWDGRSTF_Msk             (0x1UL << RCC_CSR_IWDGRSTF_Pos)        /*!< 0x20000000 */
-#define RCC_CSR_IWDGRSTF                 RCC_CSR_IWDGRSTF_Msk                  /*!< Independent Watchdog reset flag */
-#define RCC_CSR_WWDGRSTF_Pos             (30U)
-#define RCC_CSR_WWDGRSTF_Msk             (0x1UL << RCC_CSR_WWDGRSTF_Pos)        /*!< 0x40000000 */
-#define RCC_CSR_WWDGRSTF                 RCC_CSR_WWDGRSTF_Msk                  /*!< Window watchdog reset flag */
-#define RCC_CSR_LPWRRSTF_Pos             (31U)
-#define RCC_CSR_LPWRRSTF_Msk             (0x1UL << RCC_CSR_LPWRRSTF_Pos)        /*!< 0x80000000 */
-#define RCC_CSR_LPWRRSTF                 RCC_CSR_LPWRRSTF_Msk                  /*!< Low-Power reset flag */
-
-/* Reference defines */
-#define RCC_CSR_OBL                         RCC_CSR_OBLRSTF               /*!< OBL reset flag */
-
-
-/******************************************************************************/
-/*                                                                            */
-/*                           Real-Time Clock (RTC)                            */
-/*                                                                            */
-/******************************************************************************/
-/*
-* @brief Specific device feature definitions
-*/
-#define RTC_TAMPER1_SUPPORT
-#define RTC_TAMPER2_SUPPORT
-#define RTC_WAKEUP_SUPPORT
-#define RTC_BACKUP_SUPPORT
-
-/********************  Bits definition for RTC_TR register  *******************/
-#define RTC_TR_PM_Pos                  (22U)  
-#define RTC_TR_PM_Msk                  (0x1UL << RTC_TR_PM_Pos)                 /*!< 0x00400000 */
-#define RTC_TR_PM                      RTC_TR_PM_Msk                           /*!<  */
-#define RTC_TR_HT_Pos                  (20U)  
-#define RTC_TR_HT_Msk                  (0x3UL << RTC_TR_HT_Pos)                 /*!< 0x00300000 */
-#define RTC_TR_HT                      RTC_TR_HT_Msk                           /*!<  */
-#define RTC_TR_HT_0                    (0x1UL << RTC_TR_HT_Pos)                 /*!< 0x00100000 */
-#define RTC_TR_HT_1                    (0x2UL << RTC_TR_HT_Pos)                 /*!< 0x00200000 */
-#define RTC_TR_HU_Pos                  (16U)  
-#define RTC_TR_HU_Msk                  (0xFUL << RTC_TR_HU_Pos)                 /*!< 0x000F0000 */
-#define RTC_TR_HU                      RTC_TR_HU_Msk                           /*!<  */
-#define RTC_TR_HU_0                    (0x1UL << RTC_TR_HU_Pos)                 /*!< 0x00010000 */
-#define RTC_TR_HU_1                    (0x2UL << RTC_TR_HU_Pos)                 /*!< 0x00020000 */
-#define RTC_TR_HU_2                    (0x4UL << RTC_TR_HU_Pos)                 /*!< 0x00040000 */
-#define RTC_TR_HU_3                    (0x8UL << RTC_TR_HU_Pos)                 /*!< 0x00080000 */
-#define RTC_TR_MNT_Pos                 (12U)  
-#define RTC_TR_MNT_Msk                 (0x7UL << RTC_TR_MNT_Pos)                /*!< 0x00007000 */
-#define RTC_TR_MNT                     RTC_TR_MNT_Msk                          /*!<  */
-#define RTC_TR_MNT_0                   (0x1UL << RTC_TR_MNT_Pos)                /*!< 0x00001000 */
-#define RTC_TR_MNT_1                   (0x2UL << RTC_TR_MNT_Pos)                /*!< 0x00002000 */
-#define RTC_TR_MNT_2                   (0x4UL << RTC_TR_MNT_Pos)                /*!< 0x00004000 */
-#define RTC_TR_MNU_Pos                 (8U)   
-#define RTC_TR_MNU_Msk                 (0xFUL << RTC_TR_MNU_Pos)                /*!< 0x00000F00 */
-#define RTC_TR_MNU                     RTC_TR_MNU_Msk                          /*!<  */
-#define RTC_TR_MNU_0                   (0x1UL << RTC_TR_MNU_Pos)                /*!< 0x00000100 */
-#define RTC_TR_MNU_1                   (0x2UL << RTC_TR_MNU_Pos)                /*!< 0x00000200 */
-#define RTC_TR_MNU_2                   (0x4UL << RTC_TR_MNU_Pos)                /*!< 0x00000400 */
-#define RTC_TR_MNU_3                   (0x8UL << RTC_TR_MNU_Pos)                /*!< 0x00000800 */
-#define RTC_TR_ST_Pos                  (4U)   
-#define RTC_TR_ST_Msk                  (0x7UL << RTC_TR_ST_Pos)                 /*!< 0x00000070 */
-#define RTC_TR_ST                      RTC_TR_ST_Msk                           /*!<  */
-#define RTC_TR_ST_0                    (0x1UL << RTC_TR_ST_Pos)                 /*!< 0x00000010 */
-#define RTC_TR_ST_1                    (0x2UL << RTC_TR_ST_Pos)                 /*!< 0x00000020 */
-#define RTC_TR_ST_2                    (0x4UL << RTC_TR_ST_Pos)                 /*!< 0x00000040 */
-#define RTC_TR_SU_Pos                  (0U)   
-#define RTC_TR_SU_Msk                  (0xFUL << RTC_TR_SU_Pos)                 /*!< 0x0000000F */
-#define RTC_TR_SU                      RTC_TR_SU_Msk                           /*!<  */
-#define RTC_TR_SU_0                    (0x1UL << RTC_TR_SU_Pos)                 /*!< 0x00000001 */
-#define RTC_TR_SU_1                    (0x2UL << RTC_TR_SU_Pos)                 /*!< 0x00000002 */
-#define RTC_TR_SU_2                    (0x4UL << RTC_TR_SU_Pos)                 /*!< 0x00000004 */
-#define RTC_TR_SU_3                    (0x8UL << RTC_TR_SU_Pos)                 /*!< 0x00000008 */
-
-/********************  Bits definition for RTC_DR register  *******************/
-#define RTC_DR_YT_Pos                  (20U)  
-#define RTC_DR_YT_Msk                  (0xFUL << RTC_DR_YT_Pos)                 /*!< 0x00F00000 */
-#define RTC_DR_YT                      RTC_DR_YT_Msk                           /*!<  */
-#define RTC_DR_YT_0                    (0x1UL << RTC_DR_YT_Pos)                 /*!< 0x00100000 */
-#define RTC_DR_YT_1                    (0x2UL << RTC_DR_YT_Pos)                 /*!< 0x00200000 */
-#define RTC_DR_YT_2                    (0x4UL << RTC_DR_YT_Pos)                 /*!< 0x00400000 */
-#define RTC_DR_YT_3                    (0x8UL << RTC_DR_YT_Pos)                 /*!< 0x00800000 */
-#define RTC_DR_YU_Pos                  (16U)  
-#define RTC_DR_YU_Msk                  (0xFUL << RTC_DR_YU_Pos)                 /*!< 0x000F0000 */
-#define RTC_DR_YU                      RTC_DR_YU_Msk                           /*!<  */
-#define RTC_DR_YU_0                    (0x1UL << RTC_DR_YU_Pos)                 /*!< 0x00010000 */
-#define RTC_DR_YU_1                    (0x2UL << RTC_DR_YU_Pos)                 /*!< 0x00020000 */
-#define RTC_DR_YU_2                    (0x4UL << RTC_DR_YU_Pos)                 /*!< 0x00040000 */
-#define RTC_DR_YU_3                    (0x8UL << RTC_DR_YU_Pos)                 /*!< 0x00080000 */
-#define RTC_DR_WDU_Pos                 (13U)  
-#define RTC_DR_WDU_Msk                 (0x7UL << RTC_DR_WDU_Pos)                /*!< 0x0000E000 */
-#define RTC_DR_WDU                     RTC_DR_WDU_Msk                          /*!<  */
-#define RTC_DR_WDU_0                   (0x1UL << RTC_DR_WDU_Pos)                /*!< 0x00002000 */
-#define RTC_DR_WDU_1                   (0x2UL << RTC_DR_WDU_Pos)                /*!< 0x00004000 */
-#define RTC_DR_WDU_2                   (0x4UL << RTC_DR_WDU_Pos)                /*!< 0x00008000 */
-#define RTC_DR_MT_Pos                  (12U)  
-#define RTC_DR_MT_Msk                  (0x1UL << RTC_DR_MT_Pos)                 /*!< 0x00001000 */
-#define RTC_DR_MT                      RTC_DR_MT_Msk                           /*!<  */
-#define RTC_DR_MU_Pos                  (8U)   
-#define RTC_DR_MU_Msk                  (0xFUL << RTC_DR_MU_Pos)                 /*!< 0x00000F00 */
-#define RTC_DR_MU                      RTC_DR_MU_Msk                           /*!<  */
-#define RTC_DR_MU_0                    (0x1UL << RTC_DR_MU_Pos)                 /*!< 0x00000100 */
-#define RTC_DR_MU_1                    (0x2UL << RTC_DR_MU_Pos)                 /*!< 0x00000200 */
-#define RTC_DR_MU_2                    (0x4UL << RTC_DR_MU_Pos)                 /*!< 0x00000400 */
-#define RTC_DR_MU_3                    (0x8UL << RTC_DR_MU_Pos)                 /*!< 0x00000800 */
-#define RTC_DR_DT_Pos                  (4U)   
-#define RTC_DR_DT_Msk                  (0x3UL << RTC_DR_DT_Pos)                 /*!< 0x00000030 */
-#define RTC_DR_DT                      RTC_DR_DT_Msk                           /*!<  */
-#define RTC_DR_DT_0                    (0x1UL << RTC_DR_DT_Pos)                 /*!< 0x00000010 */
-#define RTC_DR_DT_1                    (0x2UL << RTC_DR_DT_Pos)                 /*!< 0x00000020 */
-#define RTC_DR_DU_Pos                  (0U)   
-#define RTC_DR_DU_Msk                  (0xFUL << RTC_DR_DU_Pos)                 /*!< 0x0000000F */
-#define RTC_DR_DU                      RTC_DR_DU_Msk                           /*!<  */
-#define RTC_DR_DU_0                    (0x1UL << RTC_DR_DU_Pos)                 /*!< 0x00000001 */
-#define RTC_DR_DU_1                    (0x2UL << RTC_DR_DU_Pos)                 /*!< 0x00000002 */
-#define RTC_DR_DU_2                    (0x4UL << RTC_DR_DU_Pos)                 /*!< 0x00000004 */
-#define RTC_DR_DU_3                    (0x8UL << RTC_DR_DU_Pos)                 /*!< 0x00000008 */
-
-/********************  Bits definition for RTC_CR register  *******************/
-#define RTC_CR_COE_Pos                 (23U)  
-#define RTC_CR_COE_Msk                 (0x1UL << RTC_CR_COE_Pos)                /*!< 0x00800000 */
-#define RTC_CR_COE                     RTC_CR_COE_Msk                          /*!<  */
-#define RTC_CR_OSEL_Pos                (21U)  
-#define RTC_CR_OSEL_Msk                (0x3UL << RTC_CR_OSEL_Pos)               /*!< 0x00600000 */
-#define RTC_CR_OSEL                    RTC_CR_OSEL_Msk                         /*!<  */
-#define RTC_CR_OSEL_0                  (0x1UL << RTC_CR_OSEL_Pos)               /*!< 0x00200000 */
-#define RTC_CR_OSEL_1                  (0x2UL << RTC_CR_OSEL_Pos)               /*!< 0x00400000 */
-#define RTC_CR_POL_Pos                 (20U)  
-#define RTC_CR_POL_Msk                 (0x1UL << RTC_CR_POL_Pos)                /*!< 0x00100000 */
-#define RTC_CR_POL                     RTC_CR_POL_Msk                          /*!<  */
-#define RTC_CR_COSEL_Pos               (19U)  
-#define RTC_CR_COSEL_Msk               (0x1UL << RTC_CR_COSEL_Pos)              /*!< 0x00080000 */
-#define RTC_CR_COSEL                   RTC_CR_COSEL_Msk                        /*!<  */
-#define RTC_CR_BKP_Pos                 (18U)  
-#define RTC_CR_BKP_Msk                 (0x1UL << RTC_CR_BKP_Pos)                /*!< 0x00040000 */
-#define RTC_CR_BKP                     RTC_CR_BKP_Msk                          /*!<  */
-#define RTC_CR_SUB1H_Pos               (17U)  
-#define RTC_CR_SUB1H_Msk               (0x1UL << RTC_CR_SUB1H_Pos)              /*!< 0x00020000 */
-#define RTC_CR_SUB1H                   RTC_CR_SUB1H_Msk                        /*!<  */
-#define RTC_CR_ADD1H_Pos               (16U)  
-#define RTC_CR_ADD1H_Msk               (0x1UL << RTC_CR_ADD1H_Pos)              /*!< 0x00010000 */
-#define RTC_CR_ADD1H                   RTC_CR_ADD1H_Msk                        /*!<  */
-#define RTC_CR_TSIE_Pos                (15U)  
-#define RTC_CR_TSIE_Msk                (0x1UL << RTC_CR_TSIE_Pos)               /*!< 0x00008000 */
-#define RTC_CR_TSIE                    RTC_CR_TSIE_Msk                         /*!<  */
-#define RTC_CR_WUTIE_Pos               (14U)  
-#define RTC_CR_WUTIE_Msk               (0x1UL << RTC_CR_WUTIE_Pos)              /*!< 0x00004000 */
-#define RTC_CR_WUTIE                   RTC_CR_WUTIE_Msk                        /*!<  */
-#define RTC_CR_ALRBIE_Pos              (13U)  
-#define RTC_CR_ALRBIE_Msk              (0x1UL << RTC_CR_ALRBIE_Pos)             /*!< 0x00002000 */
-#define RTC_CR_ALRBIE                  RTC_CR_ALRBIE_Msk                       /*!<  */
-#define RTC_CR_ALRAIE_Pos              (12U)  
-#define RTC_CR_ALRAIE_Msk              (0x1UL << RTC_CR_ALRAIE_Pos)             /*!< 0x00001000 */
-#define RTC_CR_ALRAIE                  RTC_CR_ALRAIE_Msk                       /*!<  */
-#define RTC_CR_TSE_Pos                 (11U)  
-#define RTC_CR_TSE_Msk                 (0x1UL << RTC_CR_TSE_Pos)                /*!< 0x00000800 */
-#define RTC_CR_TSE                     RTC_CR_TSE_Msk                          /*!<  */
-#define RTC_CR_WUTE_Pos                (10U)  
-#define RTC_CR_WUTE_Msk                (0x1UL << RTC_CR_WUTE_Pos)               /*!< 0x00000400 */
-#define RTC_CR_WUTE                    RTC_CR_WUTE_Msk                         /*!<  */
-#define RTC_CR_ALRBE_Pos               (9U)   
-#define RTC_CR_ALRBE_Msk               (0x1UL << RTC_CR_ALRBE_Pos)              /*!< 0x00000200 */
-#define RTC_CR_ALRBE                   RTC_CR_ALRBE_Msk                        /*!<  */
-#define RTC_CR_ALRAE_Pos               (8U)   
-#define RTC_CR_ALRAE_Msk               (0x1UL << RTC_CR_ALRAE_Pos)              /*!< 0x00000100 */
-#define RTC_CR_ALRAE                   RTC_CR_ALRAE_Msk                        /*!<  */
-#define RTC_CR_FMT_Pos                 (6U)   
-#define RTC_CR_FMT_Msk                 (0x1UL << RTC_CR_FMT_Pos)                /*!< 0x00000040 */
-#define RTC_CR_FMT                     RTC_CR_FMT_Msk                          /*!<  */
-#define RTC_CR_BYPSHAD_Pos             (5U)   
-#define RTC_CR_BYPSHAD_Msk             (0x1UL << RTC_CR_BYPSHAD_Pos)            /*!< 0x00000020 */
-#define RTC_CR_BYPSHAD                 RTC_CR_BYPSHAD_Msk                      /*!<  */
-#define RTC_CR_REFCKON_Pos             (4U)   
-#define RTC_CR_REFCKON_Msk             (0x1UL << RTC_CR_REFCKON_Pos)            /*!< 0x00000010 */
-#define RTC_CR_REFCKON                 RTC_CR_REFCKON_Msk                      /*!<  */
-#define RTC_CR_TSEDGE_Pos              (3U)   
-#define RTC_CR_TSEDGE_Msk              (0x1UL << RTC_CR_TSEDGE_Pos)             /*!< 0x00000008 */
-#define RTC_CR_TSEDGE                  RTC_CR_TSEDGE_Msk                       /*!<  */
-#define RTC_CR_WUCKSEL_Pos             (0U)   
-#define RTC_CR_WUCKSEL_Msk             (0x7UL << RTC_CR_WUCKSEL_Pos)            /*!< 0x00000007 */
-#define RTC_CR_WUCKSEL                 RTC_CR_WUCKSEL_Msk                      /*!<  */
-#define RTC_CR_WUCKSEL_0               (0x1UL << RTC_CR_WUCKSEL_Pos)            /*!< 0x00000001 */
-#define RTC_CR_WUCKSEL_1               (0x2UL << RTC_CR_WUCKSEL_Pos)            /*!< 0x00000002 */
-#define RTC_CR_WUCKSEL_2               (0x4UL << RTC_CR_WUCKSEL_Pos)            /*!< 0x00000004 */
-
-/********************  Bits definition for RTC_ISR register  ******************/
-#define RTC_ISR_RECALPF_Pos            (16U)  
-#define RTC_ISR_RECALPF_Msk            (0x1UL << RTC_ISR_RECALPF_Pos)           /*!< 0x00010000 */
-#define RTC_ISR_RECALPF                RTC_ISR_RECALPF_Msk                     /*!<  */
-#define RTC_ISR_TAMP2F_Pos             (14U)  
-#define RTC_ISR_TAMP2F_Msk             (0x1UL << RTC_ISR_TAMP2F_Pos)            /*!< 0x00004000 */
-#define RTC_ISR_TAMP2F                 RTC_ISR_TAMP2F_Msk                      /*!<  */
-#define RTC_ISR_TAMP1F_Pos             (13U)  
-#define RTC_ISR_TAMP1F_Msk             (0x1UL << RTC_ISR_TAMP1F_Pos)            /*!< 0x00002000 */
-#define RTC_ISR_TAMP1F                 RTC_ISR_TAMP1F_Msk                      /*!<  */
-#define RTC_ISR_TSOVF_Pos              (12U)  
-#define RTC_ISR_TSOVF_Msk              (0x1UL << RTC_ISR_TSOVF_Pos)             /*!< 0x00001000 */
-#define RTC_ISR_TSOVF                  RTC_ISR_TSOVF_Msk                       /*!<  */
-#define RTC_ISR_TSF_Pos                (11U)  
-#define RTC_ISR_TSF_Msk                (0x1UL << RTC_ISR_TSF_Pos)               /*!< 0x00000800 */
-#define RTC_ISR_TSF                    RTC_ISR_TSF_Msk                         /*!<  */
-#define RTC_ISR_WUTF_Pos               (10U)  
-#define RTC_ISR_WUTF_Msk               (0x1UL << RTC_ISR_WUTF_Pos)              /*!< 0x00000400 */
-#define RTC_ISR_WUTF                   RTC_ISR_WUTF_Msk                        /*!<  */
-#define RTC_ISR_ALRBF_Pos              (9U)   
-#define RTC_ISR_ALRBF_Msk              (0x1UL << RTC_ISR_ALRBF_Pos)             /*!< 0x00000200 */
-#define RTC_ISR_ALRBF                  RTC_ISR_ALRBF_Msk                       /*!<  */
-#define RTC_ISR_ALRAF_Pos              (8U)   
-#define RTC_ISR_ALRAF_Msk              (0x1UL << RTC_ISR_ALRAF_Pos)             /*!< 0x00000100 */
-#define RTC_ISR_ALRAF                  RTC_ISR_ALRAF_Msk                       /*!<  */
-#define RTC_ISR_INIT_Pos               (7U)   
-#define RTC_ISR_INIT_Msk               (0x1UL << RTC_ISR_INIT_Pos)              /*!< 0x00000080 */
-#define RTC_ISR_INIT                   RTC_ISR_INIT_Msk                        /*!<  */
-#define RTC_ISR_INITF_Pos              (6U)   
-#define RTC_ISR_INITF_Msk              (0x1UL << RTC_ISR_INITF_Pos)             /*!< 0x00000040 */
-#define RTC_ISR_INITF                  RTC_ISR_INITF_Msk                       /*!<  */
-#define RTC_ISR_RSF_Pos                (5U)   
-#define RTC_ISR_RSF_Msk                (0x1UL << RTC_ISR_RSF_Pos)               /*!< 0x00000020 */
-#define RTC_ISR_RSF                    RTC_ISR_RSF_Msk                         /*!<  */
-#define RTC_ISR_INITS_Pos              (4U)   
-#define RTC_ISR_INITS_Msk              (0x1UL << RTC_ISR_INITS_Pos)             /*!< 0x00000010 */
-#define RTC_ISR_INITS                  RTC_ISR_INITS_Msk                       /*!<  */
-#define RTC_ISR_SHPF_Pos               (3U)   
-#define RTC_ISR_SHPF_Msk               (0x1UL << RTC_ISR_SHPF_Pos)              /*!< 0x00000008 */
-#define RTC_ISR_SHPF                   RTC_ISR_SHPF_Msk                        /*!<  */
-#define RTC_ISR_WUTWF_Pos              (2U)   
-#define RTC_ISR_WUTWF_Msk              (0x1UL << RTC_ISR_WUTWF_Pos)             /*!< 0x00000004 */
-#define RTC_ISR_WUTWF                  RTC_ISR_WUTWF_Msk                       /*!<  */
-#define RTC_ISR_ALRBWF_Pos             (1U)   
-#define RTC_ISR_ALRBWF_Msk             (0x1UL << RTC_ISR_ALRBWF_Pos)            /*!< 0x00000002 */
-#define RTC_ISR_ALRBWF                 RTC_ISR_ALRBWF_Msk                      /*!<  */
-#define RTC_ISR_ALRAWF_Pos             (0U)   
-#define RTC_ISR_ALRAWF_Msk             (0x1UL << RTC_ISR_ALRAWF_Pos)            /*!< 0x00000001 */
-#define RTC_ISR_ALRAWF                 RTC_ISR_ALRAWF_Msk                      /*!<  */
-
-/********************  Bits definition for RTC_PRER register  *****************/
-#define RTC_PRER_PREDIV_A_Pos          (16U)  
-#define RTC_PRER_PREDIV_A_Msk          (0x7FUL << RTC_PRER_PREDIV_A_Pos)        /*!< 0x007F0000 */
-#define RTC_PRER_PREDIV_A              RTC_PRER_PREDIV_A_Msk                   /*!<  */
-#define RTC_PRER_PREDIV_S_Pos          (0U)   
-#define RTC_PRER_PREDIV_S_Msk          (0x7FFFUL << RTC_PRER_PREDIV_S_Pos)      /*!< 0x00007FFF */
-#define RTC_PRER_PREDIV_S              RTC_PRER_PREDIV_S_Msk                   /*!<  */
-
-/********************  Bits definition for RTC_WUTR register  *****************/
-#define RTC_WUTR_WUT_Pos               (0U)   
-#define RTC_WUTR_WUT_Msk               (0xFFFFUL << RTC_WUTR_WUT_Pos)           /*!< 0x0000FFFF */
-#define RTC_WUTR_WUT                   RTC_WUTR_WUT_Msk                        
-
-/********************  Bits definition for RTC_ALRMAR register  ***************/
-#define RTC_ALRMAR_MSK4_Pos            (31U)  
-#define RTC_ALRMAR_MSK4_Msk            (0x1UL << RTC_ALRMAR_MSK4_Pos)           /*!< 0x80000000 */
-#define RTC_ALRMAR_MSK4                RTC_ALRMAR_MSK4_Msk                     /*!<  */
-#define RTC_ALRMAR_WDSEL_Pos           (30U)  
-#define RTC_ALRMAR_WDSEL_Msk           (0x1UL << RTC_ALRMAR_WDSEL_Pos)          /*!< 0x40000000 */
-#define RTC_ALRMAR_WDSEL               RTC_ALRMAR_WDSEL_Msk                    /*!<  */
-#define RTC_ALRMAR_DT_Pos              (28U)  
-#define RTC_ALRMAR_DT_Msk              (0x3UL << RTC_ALRMAR_DT_Pos)             /*!< 0x30000000 */
-#define RTC_ALRMAR_DT                  RTC_ALRMAR_DT_Msk                       /*!<  */
-#define RTC_ALRMAR_DT_0                (0x1UL << RTC_ALRMAR_DT_Pos)             /*!< 0x10000000 */
-#define RTC_ALRMAR_DT_1                (0x2UL << RTC_ALRMAR_DT_Pos)             /*!< 0x20000000 */
-#define RTC_ALRMAR_DU_Pos              (24U)  
-#define RTC_ALRMAR_DU_Msk              (0xFUL << RTC_ALRMAR_DU_Pos)             /*!< 0x0F000000 */
-#define RTC_ALRMAR_DU                  RTC_ALRMAR_DU_Msk                       /*!<  */
-#define RTC_ALRMAR_DU_0                (0x1UL << RTC_ALRMAR_DU_Pos)             /*!< 0x01000000 */
-#define RTC_ALRMAR_DU_1                (0x2UL << RTC_ALRMAR_DU_Pos)             /*!< 0x02000000 */
-#define RTC_ALRMAR_DU_2                (0x4UL << RTC_ALRMAR_DU_Pos)             /*!< 0x04000000 */
-#define RTC_ALRMAR_DU_3                (0x8UL << RTC_ALRMAR_DU_Pos)             /*!< 0x08000000 */
-#define RTC_ALRMAR_MSK3_Pos            (23U)  
-#define RTC_ALRMAR_MSK3_Msk            (0x1UL << RTC_ALRMAR_MSK3_Pos)           /*!< 0x00800000 */
-#define RTC_ALRMAR_MSK3                RTC_ALRMAR_MSK3_Msk                     /*!<  */
-#define RTC_ALRMAR_PM_Pos              (22U)  
-#define RTC_ALRMAR_PM_Msk              (0x1UL << RTC_ALRMAR_PM_Pos)             /*!< 0x00400000 */
-#define RTC_ALRMAR_PM                  RTC_ALRMAR_PM_Msk                       /*!<  */
-#define RTC_ALRMAR_HT_Pos              (20U)  
-#define RTC_ALRMAR_HT_Msk              (0x3UL << RTC_ALRMAR_HT_Pos)             /*!< 0x00300000 */
-#define RTC_ALRMAR_HT                  RTC_ALRMAR_HT_Msk                       /*!<  */
-#define RTC_ALRMAR_HT_0                (0x1UL << RTC_ALRMAR_HT_Pos)             /*!< 0x00100000 */
-#define RTC_ALRMAR_HT_1                (0x2UL << RTC_ALRMAR_HT_Pos)             /*!< 0x00200000 */
-#define RTC_ALRMAR_HU_Pos              (16U)  
-#define RTC_ALRMAR_HU_Msk              (0xFUL << RTC_ALRMAR_HU_Pos)             /*!< 0x000F0000 */
-#define RTC_ALRMAR_HU                  RTC_ALRMAR_HU_Msk                       /*!<  */
-#define RTC_ALRMAR_HU_0                (0x1UL << RTC_ALRMAR_HU_Pos)             /*!< 0x00010000 */
-#define RTC_ALRMAR_HU_1                (0x2UL << RTC_ALRMAR_HU_Pos)             /*!< 0x00020000 */
-#define RTC_ALRMAR_HU_2                (0x4UL << RTC_ALRMAR_HU_Pos)             /*!< 0x00040000 */
-#define RTC_ALRMAR_HU_3                (0x8UL << RTC_ALRMAR_HU_Pos)             /*!< 0x00080000 */
-#define RTC_ALRMAR_MSK2_Pos            (15U)  
-#define RTC_ALRMAR_MSK2_Msk            (0x1UL << RTC_ALRMAR_MSK2_Pos)           /*!< 0x00008000 */
-#define RTC_ALRMAR_MSK2                RTC_ALRMAR_MSK2_Msk                     /*!<  */
-#define RTC_ALRMAR_MNT_Pos             (12U)  
-#define RTC_ALRMAR_MNT_Msk             (0x7UL << RTC_ALRMAR_MNT_Pos)            /*!< 0x00007000 */
-#define RTC_ALRMAR_MNT                 RTC_ALRMAR_MNT_Msk                      /*!<  */
-#define RTC_ALRMAR_MNT_0               (0x1UL << RTC_ALRMAR_MNT_Pos)            /*!< 0x00001000 */
-#define RTC_ALRMAR_MNT_1               (0x2UL << RTC_ALRMAR_MNT_Pos)            /*!< 0x00002000 */
-#define RTC_ALRMAR_MNT_2               (0x4UL << RTC_ALRMAR_MNT_Pos)            /*!< 0x00004000 */
-#define RTC_ALRMAR_MNU_Pos             (8U)   
-#define RTC_ALRMAR_MNU_Msk             (0xFUL << RTC_ALRMAR_MNU_Pos)            /*!< 0x00000F00 */
-#define RTC_ALRMAR_MNU                 RTC_ALRMAR_MNU_Msk                      /*!<  */
-#define RTC_ALRMAR_MNU_0               (0x1UL << RTC_ALRMAR_MNU_Pos)            /*!< 0x00000100 */
-#define RTC_ALRMAR_MNU_1               (0x2UL << RTC_ALRMAR_MNU_Pos)            /*!< 0x00000200 */
-#define RTC_ALRMAR_MNU_2               (0x4UL << RTC_ALRMAR_MNU_Pos)            /*!< 0x00000400 */
-#define RTC_ALRMAR_MNU_3               (0x8UL << RTC_ALRMAR_MNU_Pos)            /*!< 0x00000800 */
-#define RTC_ALRMAR_MSK1_Pos            (7U)   
-#define RTC_ALRMAR_MSK1_Msk            (0x1UL << RTC_ALRMAR_MSK1_Pos)           /*!< 0x00000080 */
-#define RTC_ALRMAR_MSK1                RTC_ALRMAR_MSK1_Msk                     /*!<  */
-#define RTC_ALRMAR_ST_Pos              (4U)   
-#define RTC_ALRMAR_ST_Msk              (0x7UL << RTC_ALRMAR_ST_Pos)             /*!< 0x00000070 */
-#define RTC_ALRMAR_ST                  RTC_ALRMAR_ST_Msk                       /*!<  */
-#define RTC_ALRMAR_ST_0                (0x1UL << RTC_ALRMAR_ST_Pos)             /*!< 0x00000010 */
-#define RTC_ALRMAR_ST_1                (0x2UL << RTC_ALRMAR_ST_Pos)             /*!< 0x00000020 */
-#define RTC_ALRMAR_ST_2                (0x4UL << RTC_ALRMAR_ST_Pos)             /*!< 0x00000040 */
-#define RTC_ALRMAR_SU_Pos              (0U)   
-#define RTC_ALRMAR_SU_Msk              (0xFUL << RTC_ALRMAR_SU_Pos)             /*!< 0x0000000F */
-#define RTC_ALRMAR_SU                  RTC_ALRMAR_SU_Msk                       /*!<  */
-#define RTC_ALRMAR_SU_0                (0x1UL << RTC_ALRMAR_SU_Pos)             /*!< 0x00000001 */
-#define RTC_ALRMAR_SU_1                (0x2UL << RTC_ALRMAR_SU_Pos)             /*!< 0x00000002 */
-#define RTC_ALRMAR_SU_2                (0x4UL << RTC_ALRMAR_SU_Pos)             /*!< 0x00000004 */
-#define RTC_ALRMAR_SU_3                (0x8UL << RTC_ALRMAR_SU_Pos)             /*!< 0x00000008 */
-
-/********************  Bits definition for RTC_ALRMBR register  ***************/
-#define RTC_ALRMBR_MSK4_Pos            (31U)  
-#define RTC_ALRMBR_MSK4_Msk            (0x1UL << RTC_ALRMBR_MSK4_Pos)           /*!< 0x80000000 */
-#define RTC_ALRMBR_MSK4                RTC_ALRMBR_MSK4_Msk                     /*!<  */
-#define RTC_ALRMBR_WDSEL_Pos           (30U)  
-#define RTC_ALRMBR_WDSEL_Msk           (0x1UL << RTC_ALRMBR_WDSEL_Pos)          /*!< 0x40000000 */
-#define RTC_ALRMBR_WDSEL               RTC_ALRMBR_WDSEL_Msk                    /*!<  */
-#define RTC_ALRMBR_DT_Pos              (28U)  
-#define RTC_ALRMBR_DT_Msk              (0x3UL << RTC_ALRMBR_DT_Pos)             /*!< 0x30000000 */
-#define RTC_ALRMBR_DT                  RTC_ALRMBR_DT_Msk                       /*!<  */
-#define RTC_ALRMBR_DT_0                (0x1UL << RTC_ALRMBR_DT_Pos)             /*!< 0x10000000 */
-#define RTC_ALRMBR_DT_1                (0x2UL << RTC_ALRMBR_DT_Pos)             /*!< 0x20000000 */
-#define RTC_ALRMBR_DU_Pos              (24U)  
-#define RTC_ALRMBR_DU_Msk              (0xFUL << RTC_ALRMBR_DU_Pos)             /*!< 0x0F000000 */
-#define RTC_ALRMBR_DU                  RTC_ALRMBR_DU_Msk                       /*!<  */
-#define RTC_ALRMBR_DU_0                (0x1UL << RTC_ALRMBR_DU_Pos)             /*!< 0x01000000 */
-#define RTC_ALRMBR_DU_1                (0x2UL << RTC_ALRMBR_DU_Pos)             /*!< 0x02000000 */
-#define RTC_ALRMBR_DU_2                (0x4UL << RTC_ALRMBR_DU_Pos)             /*!< 0x04000000 */
-#define RTC_ALRMBR_DU_3                (0x8UL << RTC_ALRMBR_DU_Pos)             /*!< 0x08000000 */
-#define RTC_ALRMBR_MSK3_Pos            (23U)  
-#define RTC_ALRMBR_MSK3_Msk            (0x1UL << RTC_ALRMBR_MSK3_Pos)           /*!< 0x00800000 */
-#define RTC_ALRMBR_MSK3                RTC_ALRMBR_MSK3_Msk                     /*!<  */
-#define RTC_ALRMBR_PM_Pos              (22U)  
-#define RTC_ALRMBR_PM_Msk              (0x1UL << RTC_ALRMBR_PM_Pos)             /*!< 0x00400000 */
-#define RTC_ALRMBR_PM                  RTC_ALRMBR_PM_Msk                       /*!<  */
-#define RTC_ALRMBR_HT_Pos              (20U)  
-#define RTC_ALRMBR_HT_Msk              (0x3UL << RTC_ALRMBR_HT_Pos)             /*!< 0x00300000 */
-#define RTC_ALRMBR_HT                  RTC_ALRMBR_HT_Msk                       /*!<  */
-#define RTC_ALRMBR_HT_0                (0x1UL << RTC_ALRMBR_HT_Pos)             /*!< 0x00100000 */
-#define RTC_ALRMBR_HT_1                (0x2UL << RTC_ALRMBR_HT_Pos)             /*!< 0x00200000 */
-#define RTC_ALRMBR_HU_Pos              (16U)  
-#define RTC_ALRMBR_HU_Msk              (0xFUL << RTC_ALRMBR_HU_Pos)             /*!< 0x000F0000 */
-#define RTC_ALRMBR_HU                  RTC_ALRMBR_HU_Msk                       /*!<  */
-#define RTC_ALRMBR_HU_0                (0x1UL << RTC_ALRMBR_HU_Pos)             /*!< 0x00010000 */
-#define RTC_ALRMBR_HU_1                (0x2UL << RTC_ALRMBR_HU_Pos)             /*!< 0x00020000 */
-#define RTC_ALRMBR_HU_2                (0x4UL << RTC_ALRMBR_HU_Pos)             /*!< 0x00040000 */
-#define RTC_ALRMBR_HU_3                (0x8UL << RTC_ALRMBR_HU_Pos)             /*!< 0x00080000 */
-#define RTC_ALRMBR_MSK2_Pos            (15U)  
-#define RTC_ALRMBR_MSK2_Msk            (0x1UL << RTC_ALRMBR_MSK2_Pos)           /*!< 0x00008000 */
-#define RTC_ALRMBR_MSK2                RTC_ALRMBR_MSK2_Msk                     /*!<  */
-#define RTC_ALRMBR_MNT_Pos             (12U)  
-#define RTC_ALRMBR_MNT_Msk             (0x7UL << RTC_ALRMBR_MNT_Pos)            /*!< 0x00007000 */
-#define RTC_ALRMBR_MNT                 RTC_ALRMBR_MNT_Msk                      /*!<  */
-#define RTC_ALRMBR_MNT_0               (0x1UL << RTC_ALRMBR_MNT_Pos)            /*!< 0x00001000 */
-#define RTC_ALRMBR_MNT_1               (0x2UL << RTC_ALRMBR_MNT_Pos)            /*!< 0x00002000 */
-#define RTC_ALRMBR_MNT_2               (0x4UL << RTC_ALRMBR_MNT_Pos)            /*!< 0x00004000 */
-#define RTC_ALRMBR_MNU_Pos             (8U)   
-#define RTC_ALRMBR_MNU_Msk             (0xFUL << RTC_ALRMBR_MNU_Pos)            /*!< 0x00000F00 */
-#define RTC_ALRMBR_MNU                 RTC_ALRMBR_MNU_Msk                      /*!<  */
-#define RTC_ALRMBR_MNU_0               (0x1UL << RTC_ALRMBR_MNU_Pos)            /*!< 0x00000100 */
-#define RTC_ALRMBR_MNU_1               (0x2UL << RTC_ALRMBR_MNU_Pos)            /*!< 0x00000200 */
-#define RTC_ALRMBR_MNU_2               (0x4UL << RTC_ALRMBR_MNU_Pos)            /*!< 0x00000400 */
-#define RTC_ALRMBR_MNU_3               (0x8UL << RTC_ALRMBR_MNU_Pos)            /*!< 0x00000800 */
-#define RTC_ALRMBR_MSK1_Pos            (7U)   
-#define RTC_ALRMBR_MSK1_Msk            (0x1UL << RTC_ALRMBR_MSK1_Pos)           /*!< 0x00000080 */
-#define RTC_ALRMBR_MSK1                RTC_ALRMBR_MSK1_Msk                     /*!<  */
-#define RTC_ALRMBR_ST_Pos              (4U)   
-#define RTC_ALRMBR_ST_Msk              (0x7UL << RTC_ALRMBR_ST_Pos)             /*!< 0x00000070 */
-#define RTC_ALRMBR_ST                  RTC_ALRMBR_ST_Msk                       /*!<  */
-#define RTC_ALRMBR_ST_0                (0x1UL << RTC_ALRMBR_ST_Pos)             /*!< 0x00000010 */
-#define RTC_ALRMBR_ST_1                (0x2UL << RTC_ALRMBR_ST_Pos)             /*!< 0x00000020 */
-#define RTC_ALRMBR_ST_2                (0x4UL << RTC_ALRMBR_ST_Pos)             /*!< 0x00000040 */
-#define RTC_ALRMBR_SU_Pos              (0U)   
-#define RTC_ALRMBR_SU_Msk              (0xFUL << RTC_ALRMBR_SU_Pos)             /*!< 0x0000000F */
-#define RTC_ALRMBR_SU                  RTC_ALRMBR_SU_Msk                       /*!<  */
-#define RTC_ALRMBR_SU_0                (0x1UL << RTC_ALRMBR_SU_Pos)             /*!< 0x00000001 */
-#define RTC_ALRMBR_SU_1                (0x2UL << RTC_ALRMBR_SU_Pos)             /*!< 0x00000002 */
-#define RTC_ALRMBR_SU_2                (0x4UL << RTC_ALRMBR_SU_Pos)             /*!< 0x00000004 */
-#define RTC_ALRMBR_SU_3                (0x8UL << RTC_ALRMBR_SU_Pos)             /*!< 0x00000008 */
-
-/********************  Bits definition for RTC_WPR register  ******************/
-#define RTC_WPR_KEY_Pos                (0U)   
-#define RTC_WPR_KEY_Msk                (0xFFUL << RTC_WPR_KEY_Pos)              /*!< 0x000000FF */
-#define RTC_WPR_KEY                    RTC_WPR_KEY_Msk                         /*!<  */
-
-/********************  Bits definition for RTC_SSR register  ******************/
-#define RTC_SSR_SS_Pos                 (0U)   
-#define RTC_SSR_SS_Msk                 (0xFFFFUL << RTC_SSR_SS_Pos)             /*!< 0x0000FFFF */
-#define RTC_SSR_SS                     RTC_SSR_SS_Msk                          /*!<  */
-
-/********************  Bits definition for RTC_SHIFTR register  ***************/
-#define RTC_SHIFTR_SUBFS_Pos           (0U)   
-#define RTC_SHIFTR_SUBFS_Msk           (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos)       /*!< 0x00007FFF */
-#define RTC_SHIFTR_SUBFS               RTC_SHIFTR_SUBFS_Msk                    /*!<  */
-#define RTC_SHIFTR_ADD1S_Pos           (31U)  
-#define RTC_SHIFTR_ADD1S_Msk           (0x1UL << RTC_SHIFTR_ADD1S_Pos)          /*!< 0x80000000 */
-#define RTC_SHIFTR_ADD1S               RTC_SHIFTR_ADD1S_Msk                    /*!<  */
-
-/********************  Bits definition for RTC_TSTR register  *****************/
-#define RTC_TSTR_PM_Pos                (22U)  
-#define RTC_TSTR_PM_Msk                (0x1UL << RTC_TSTR_PM_Pos)               /*!< 0x00400000 */
-#define RTC_TSTR_PM                    RTC_TSTR_PM_Msk                         /*!<  */
-#define RTC_TSTR_HT_Pos                (20U)  
-#define RTC_TSTR_HT_Msk                (0x3UL << RTC_TSTR_HT_Pos)               /*!< 0x00300000 */
-#define RTC_TSTR_HT                    RTC_TSTR_HT_Msk                         /*!<  */
-#define RTC_TSTR_HT_0                  (0x1UL << RTC_TSTR_HT_Pos)               /*!< 0x00100000 */
-#define RTC_TSTR_HT_1                  (0x2UL << RTC_TSTR_HT_Pos)               /*!< 0x00200000 */
-#define RTC_TSTR_HU_Pos                (16U)  
-#define RTC_TSTR_HU_Msk                (0xFUL << RTC_TSTR_HU_Pos)               /*!< 0x000F0000 */
-#define RTC_TSTR_HU                    RTC_TSTR_HU_Msk                         /*!<  */
-#define RTC_TSTR_HU_0                  (0x1UL << RTC_TSTR_HU_Pos)               /*!< 0x00010000 */
-#define RTC_TSTR_HU_1                  (0x2UL << RTC_TSTR_HU_Pos)               /*!< 0x00020000 */
-#define RTC_TSTR_HU_2                  (0x4UL << RTC_TSTR_HU_Pos)               /*!< 0x00040000 */
-#define RTC_TSTR_HU_3                  (0x8UL << RTC_TSTR_HU_Pos)               /*!< 0x00080000 */
-#define RTC_TSTR_MNT_Pos               (12U)  
-#define RTC_TSTR_MNT_Msk               (0x7UL << RTC_TSTR_MNT_Pos)              /*!< 0x00007000 */
-#define RTC_TSTR_MNT                   RTC_TSTR_MNT_Msk                        /*!<  */
-#define RTC_TSTR_MNT_0                 (0x1UL << RTC_TSTR_MNT_Pos)              /*!< 0x00001000 */
-#define RTC_TSTR_MNT_1                 (0x2UL << RTC_TSTR_MNT_Pos)              /*!< 0x00002000 */
-#define RTC_TSTR_MNT_2                 (0x4UL << RTC_TSTR_MNT_Pos)              /*!< 0x00004000 */
-#define RTC_TSTR_MNU_Pos               (8U)   
-#define RTC_TSTR_MNU_Msk               (0xFUL << RTC_TSTR_MNU_Pos)              /*!< 0x00000F00 */
-#define RTC_TSTR_MNU                   RTC_TSTR_MNU_Msk                        /*!<  */
-#define RTC_TSTR_MNU_0                 (0x1UL << RTC_TSTR_MNU_Pos)              /*!< 0x00000100 */
-#define RTC_TSTR_MNU_1                 (0x2UL << RTC_TSTR_MNU_Pos)              /*!< 0x00000200 */
-#define RTC_TSTR_MNU_2                 (0x4UL << RTC_TSTR_MNU_Pos)              /*!< 0x00000400 */
-#define RTC_TSTR_MNU_3                 (0x8UL << RTC_TSTR_MNU_Pos)              /*!< 0x00000800 */
-#define RTC_TSTR_ST_Pos                (4U)   
-#define RTC_TSTR_ST_Msk                (0x7UL << RTC_TSTR_ST_Pos)               /*!< 0x00000070 */
-#define RTC_TSTR_ST                    RTC_TSTR_ST_Msk                         /*!<  */
-#define RTC_TSTR_ST_0                  (0x1UL << RTC_TSTR_ST_Pos)               /*!< 0x00000010 */
-#define RTC_TSTR_ST_1                  (0x2UL << RTC_TSTR_ST_Pos)               /*!< 0x00000020 */
-#define RTC_TSTR_ST_2                  (0x4UL << RTC_TSTR_ST_Pos)               /*!< 0x00000040 */
-#define RTC_TSTR_SU_Pos                (0U)   
-#define RTC_TSTR_SU_Msk                (0xFUL << RTC_TSTR_SU_Pos)               /*!< 0x0000000F */
-#define RTC_TSTR_SU                    RTC_TSTR_SU_Msk                         /*!<  */
-#define RTC_TSTR_SU_0                  (0x1UL << RTC_TSTR_SU_Pos)               /*!< 0x00000001 */
-#define RTC_TSTR_SU_1                  (0x2UL << RTC_TSTR_SU_Pos)               /*!< 0x00000002 */
-#define RTC_TSTR_SU_2                  (0x4UL << RTC_TSTR_SU_Pos)               /*!< 0x00000004 */
-#define RTC_TSTR_SU_3                  (0x8UL << RTC_TSTR_SU_Pos)               /*!< 0x00000008 */
-
-/********************  Bits definition for RTC_TSDR register  *****************/
-#define RTC_TSDR_WDU_Pos               (13U)  
-#define RTC_TSDR_WDU_Msk               (0x7UL << RTC_TSDR_WDU_Pos)              /*!< 0x0000E000 */
-#define RTC_TSDR_WDU                   RTC_TSDR_WDU_Msk                        /*!<  */
-#define RTC_TSDR_WDU_0                 (0x1UL << RTC_TSDR_WDU_Pos)              /*!< 0x00002000 */
-#define RTC_TSDR_WDU_1                 (0x2UL << RTC_TSDR_WDU_Pos)              /*!< 0x00004000 */
-#define RTC_TSDR_WDU_2                 (0x4UL << RTC_TSDR_WDU_Pos)              /*!< 0x00008000 */
-#define RTC_TSDR_MT_Pos                (12U)  
-#define RTC_TSDR_MT_Msk                (0x1UL << RTC_TSDR_MT_Pos)               /*!< 0x00001000 */
-#define RTC_TSDR_MT                    RTC_TSDR_MT_Msk                         /*!<  */
-#define RTC_TSDR_MU_Pos                (8U)   
-#define RTC_TSDR_MU_Msk                (0xFUL << RTC_TSDR_MU_Pos)               /*!< 0x00000F00 */
-#define RTC_TSDR_MU                    RTC_TSDR_MU_Msk                         /*!<  */
-#define RTC_TSDR_MU_0                  (0x1UL << RTC_TSDR_MU_Pos)               /*!< 0x00000100 */
-#define RTC_TSDR_MU_1                  (0x2UL << RTC_TSDR_MU_Pos)               /*!< 0x00000200 */
-#define RTC_TSDR_MU_2                  (0x4UL << RTC_TSDR_MU_Pos)               /*!< 0x00000400 */
-#define RTC_TSDR_MU_3                  (0x8UL << RTC_TSDR_MU_Pos)               /*!< 0x00000800 */
-#define RTC_TSDR_DT_Pos                (4U)   
-#define RTC_TSDR_DT_Msk                (0x3UL << RTC_TSDR_DT_Pos)               /*!< 0x00000030 */
-#define RTC_TSDR_DT                    RTC_TSDR_DT_Msk                         /*!<  */
-#define RTC_TSDR_DT_0                  (0x1UL << RTC_TSDR_DT_Pos)               /*!< 0x00000010 */
-#define RTC_TSDR_DT_1                  (0x2UL << RTC_TSDR_DT_Pos)               /*!< 0x00000020 */
-#define RTC_TSDR_DU_Pos                (0U)   
-#define RTC_TSDR_DU_Msk                (0xFUL << RTC_TSDR_DU_Pos)               /*!< 0x0000000F */
-#define RTC_TSDR_DU                    RTC_TSDR_DU_Msk                         /*!<  */
-#define RTC_TSDR_DU_0                  (0x1UL << RTC_TSDR_DU_Pos)               /*!< 0x00000001 */
-#define RTC_TSDR_DU_1                  (0x2UL << RTC_TSDR_DU_Pos)               /*!< 0x00000002 */
-#define RTC_TSDR_DU_2                  (0x4UL << RTC_TSDR_DU_Pos)               /*!< 0x00000004 */
-#define RTC_TSDR_DU_3                  (0x8UL << RTC_TSDR_DU_Pos)               /*!< 0x00000008 */
-
-/********************  Bits definition for RTC_TSSSR register  ****************/
-#define RTC_TSSSR_SS_Pos               (0U)   
-#define RTC_TSSSR_SS_Msk               (0xFFFFUL << RTC_TSSSR_SS_Pos)           /*!< 0x0000FFFF */
-#define RTC_TSSSR_SS                   RTC_TSSSR_SS_Msk                        
-
-/********************  Bits definition for RTC_CALR register  *****************/
-#define RTC_CALR_CALP_Pos              (15U)  
-#define RTC_CALR_CALP_Msk              (0x1UL << RTC_CALR_CALP_Pos)             /*!< 0x00008000 */
-#define RTC_CALR_CALP                  RTC_CALR_CALP_Msk                       /*!<  */
-#define RTC_CALR_CALW8_Pos             (14U)  
-#define RTC_CALR_CALW8_Msk             (0x1UL << RTC_CALR_CALW8_Pos)            /*!< 0x00004000 */
-#define RTC_CALR_CALW8                 RTC_CALR_CALW8_Msk                      /*!<  */
-#define RTC_CALR_CALW16_Pos            (13U)  
-#define RTC_CALR_CALW16_Msk            (0x1UL << RTC_CALR_CALW16_Pos)           /*!< 0x00002000 */
-#define RTC_CALR_CALW16                RTC_CALR_CALW16_Msk                     /*!<  */
-#define RTC_CALR_CALM_Pos              (0U)   
-#define RTC_CALR_CALM_Msk              (0x1FFUL << RTC_CALR_CALM_Pos)           /*!< 0x000001FF */
-#define RTC_CALR_CALM                  RTC_CALR_CALM_Msk                       /*!<  */
-#define RTC_CALR_CALM_0                (0x001UL << RTC_CALR_CALM_Pos)           /*!< 0x00000001 */
-#define RTC_CALR_CALM_1                (0x002UL << RTC_CALR_CALM_Pos)           /*!< 0x00000002 */
-#define RTC_CALR_CALM_2                (0x004UL << RTC_CALR_CALM_Pos)           /*!< 0x00000004 */
-#define RTC_CALR_CALM_3                (0x008UL << RTC_CALR_CALM_Pos)           /*!< 0x00000008 */
-#define RTC_CALR_CALM_4                (0x010UL << RTC_CALR_CALM_Pos)           /*!< 0x00000010 */
-#define RTC_CALR_CALM_5                (0x020UL << RTC_CALR_CALM_Pos)           /*!< 0x00000020 */
-#define RTC_CALR_CALM_6                (0x040UL << RTC_CALR_CALM_Pos)           /*!< 0x00000040 */
-#define RTC_CALR_CALM_7                (0x080UL << RTC_CALR_CALM_Pos)           /*!< 0x00000080 */
-#define RTC_CALR_CALM_8                (0x100UL << RTC_CALR_CALM_Pos)           /*!< 0x00000100 */
-
-/* Legacy defines */
-#define RTC_CAL_CALP     RTC_CALR_CALP 
-#define RTC_CAL_CALW8    RTC_CALR_CALW8  
-#define RTC_CAL_CALW16   RTC_CALR_CALW16 
-#define RTC_CAL_CALM     RTC_CALR_CALM 
-#define RTC_CAL_CALM_0   RTC_CALR_CALM_0 
-#define RTC_CAL_CALM_1   RTC_CALR_CALM_1 
-#define RTC_CAL_CALM_2   RTC_CALR_CALM_2 
-#define RTC_CAL_CALM_3   RTC_CALR_CALM_3 
-#define RTC_CAL_CALM_4   RTC_CALR_CALM_4 
-#define RTC_CAL_CALM_5   RTC_CALR_CALM_5 
-#define RTC_CAL_CALM_6   RTC_CALR_CALM_6 
-#define RTC_CAL_CALM_7   RTC_CALR_CALM_7 
-#define RTC_CAL_CALM_8   RTC_CALR_CALM_8 
-
-/********************  Bits definition for RTC_TAMPCR register  ****************/
-#define RTC_TAMPCR_TAMP2MF_Pos         (21U)  
-#define RTC_TAMPCR_TAMP2MF_Msk         (0x1UL << RTC_TAMPCR_TAMP2MF_Pos)        /*!< 0x00200000 */
-#define RTC_TAMPCR_TAMP2MF             RTC_TAMPCR_TAMP2MF_Msk                  /*!<  */
-#define RTC_TAMPCR_TAMP2NOERASE_Pos    (20U)  
-#define RTC_TAMPCR_TAMP2NOERASE_Msk    (0x1UL << RTC_TAMPCR_TAMP2NOERASE_Pos)   /*!< 0x00100000 */
-#define RTC_TAMPCR_TAMP2NOERASE        RTC_TAMPCR_TAMP2NOERASE_Msk             /*!<  */
-#define RTC_TAMPCR_TAMP2IE_Pos         (19U)  
-#define RTC_TAMPCR_TAMP2IE_Msk         (0x1UL << RTC_TAMPCR_TAMP2IE_Pos)        /*!< 0x00080000 */
-#define RTC_TAMPCR_TAMP2IE             RTC_TAMPCR_TAMP2IE_Msk                  /*!<  */
-#define RTC_TAMPCR_TAMP1MF_Pos         (18U)  
-#define RTC_TAMPCR_TAMP1MF_Msk         (0x1UL << RTC_TAMPCR_TAMP1MF_Pos)        /*!< 0x00040000 */
-#define RTC_TAMPCR_TAMP1MF             RTC_TAMPCR_TAMP1MF_Msk                  /*!<  */
-#define RTC_TAMPCR_TAMP1NOERASE_Pos    (17U)  
-#define RTC_TAMPCR_TAMP1NOERASE_Msk    (0x1UL << RTC_TAMPCR_TAMP1NOERASE_Pos)   /*!< 0x00020000 */
-#define RTC_TAMPCR_TAMP1NOERASE        RTC_TAMPCR_TAMP1NOERASE_Msk             /*!<  */
-#define RTC_TAMPCR_TAMP1IE_Pos         (16U)  
-#define RTC_TAMPCR_TAMP1IE_Msk         (0x1UL << RTC_TAMPCR_TAMP1IE_Pos)        /*!< 0x00010000 */
-#define RTC_TAMPCR_TAMP1IE             RTC_TAMPCR_TAMP1IE_Msk                  /*!<  */
-#define RTC_TAMPCR_TAMPPUDIS_Pos       (15U)  
-#define RTC_TAMPCR_TAMPPUDIS_Msk       (0x1UL << RTC_TAMPCR_TAMPPUDIS_Pos)      /*!< 0x00008000 */
-#define RTC_TAMPCR_TAMPPUDIS           RTC_TAMPCR_TAMPPUDIS_Msk                /*!<  */
-#define RTC_TAMPCR_TAMPPRCH_Pos        (13U)  
-#define RTC_TAMPCR_TAMPPRCH_Msk        (0x3UL << RTC_TAMPCR_TAMPPRCH_Pos)       /*!< 0x00006000 */
-#define RTC_TAMPCR_TAMPPRCH            RTC_TAMPCR_TAMPPRCH_Msk                 /*!<  */
-#define RTC_TAMPCR_TAMPPRCH_0          (0x1UL << RTC_TAMPCR_TAMPPRCH_Pos)       /*!< 0x00002000 */
-#define RTC_TAMPCR_TAMPPRCH_1          (0x2UL << RTC_TAMPCR_TAMPPRCH_Pos)       /*!< 0x00004000 */
-#define RTC_TAMPCR_TAMPFLT_Pos         (11U)  
-#define RTC_TAMPCR_TAMPFLT_Msk         (0x3UL << RTC_TAMPCR_TAMPFLT_Pos)        /*!< 0x00001800 */
-#define RTC_TAMPCR_TAMPFLT             RTC_TAMPCR_TAMPFLT_Msk                  /*!<  */
-#define RTC_TAMPCR_TAMPFLT_0           (0x1UL << RTC_TAMPCR_TAMPFLT_Pos)        /*!< 0x00000800 */
-#define RTC_TAMPCR_TAMPFLT_1           (0x2UL << RTC_TAMPCR_TAMPFLT_Pos)        /*!< 0x00001000 */
-#define RTC_TAMPCR_TAMPFREQ_Pos        (8U)   
-#define RTC_TAMPCR_TAMPFREQ_Msk        (0x7UL << RTC_TAMPCR_TAMPFREQ_Pos)       /*!< 0x00000700 */
-#define RTC_TAMPCR_TAMPFREQ            RTC_TAMPCR_TAMPFREQ_Msk                 /*!<  */
-#define RTC_TAMPCR_TAMPFREQ_0          (0x1UL << RTC_TAMPCR_TAMPFREQ_Pos)       /*!< 0x00000100 */
-#define RTC_TAMPCR_TAMPFREQ_1          (0x2UL << RTC_TAMPCR_TAMPFREQ_Pos)       /*!< 0x00000200 */
-#define RTC_TAMPCR_TAMPFREQ_2          (0x4UL << RTC_TAMPCR_TAMPFREQ_Pos)       /*!< 0x00000400 */
-#define RTC_TAMPCR_TAMPTS_Pos          (7U)   
-#define RTC_TAMPCR_TAMPTS_Msk          (0x1UL << RTC_TAMPCR_TAMPTS_Pos)         /*!< 0x00000080 */
-#define RTC_TAMPCR_TAMPTS              RTC_TAMPCR_TAMPTS_Msk                   /*!<  */
-#define RTC_TAMPCR_TAMP2TRG_Pos        (4U)   
-#define RTC_TAMPCR_TAMP2TRG_Msk        (0x1UL << RTC_TAMPCR_TAMP2TRG_Pos)       /*!< 0x00000010 */
-#define RTC_TAMPCR_TAMP2TRG            RTC_TAMPCR_TAMP2TRG_Msk                 /*!<  */
-#define RTC_TAMPCR_TAMP2E_Pos          (3U)   
-#define RTC_TAMPCR_TAMP2E_Msk          (0x1UL << RTC_TAMPCR_TAMP2E_Pos)         /*!< 0x00000008 */
-#define RTC_TAMPCR_TAMP2E              RTC_TAMPCR_TAMP2E_Msk                   /*!<  */
-#define RTC_TAMPCR_TAMPIE_Pos          (2U)   
-#define RTC_TAMPCR_TAMPIE_Msk          (0x1UL << RTC_TAMPCR_TAMPIE_Pos)         /*!< 0x00000004 */
-#define RTC_TAMPCR_TAMPIE              RTC_TAMPCR_TAMPIE_Msk                   /*!<  */
-#define RTC_TAMPCR_TAMP1TRG_Pos        (1U)   
-#define RTC_TAMPCR_TAMP1TRG_Msk        (0x1UL << RTC_TAMPCR_TAMP1TRG_Pos)       /*!< 0x00000002 */
-#define RTC_TAMPCR_TAMP1TRG            RTC_TAMPCR_TAMP1TRG_Msk                 /*!<  */
-#define RTC_TAMPCR_TAMP1E_Pos          (0U)   
-#define RTC_TAMPCR_TAMP1E_Msk          (0x1UL << RTC_TAMPCR_TAMP1E_Pos)         /*!< 0x00000001 */
-#define RTC_TAMPCR_TAMP1E              RTC_TAMPCR_TAMP1E_Msk                   /*!<  */
-
-/********************  Bits definition for RTC_ALRMASSR register  *************/
-#define RTC_ALRMASSR_MASKSS_Pos        (24U)  
-#define RTC_ALRMASSR_MASKSS_Msk        (0xFUL << RTC_ALRMASSR_MASKSS_Pos)       /*!< 0x0F000000 */
-#define RTC_ALRMASSR_MASKSS            RTC_ALRMASSR_MASKSS_Msk                 
-#define RTC_ALRMASSR_MASKSS_0          (0x1UL << RTC_ALRMASSR_MASKSS_Pos)       /*!< 0x01000000 */
-#define RTC_ALRMASSR_MASKSS_1          (0x2UL << RTC_ALRMASSR_MASKSS_Pos)       /*!< 0x02000000 */
-#define RTC_ALRMASSR_MASKSS_2          (0x4UL << RTC_ALRMASSR_MASKSS_Pos)       /*!< 0x04000000 */
-#define RTC_ALRMASSR_MASKSS_3          (0x8UL << RTC_ALRMASSR_MASKSS_Pos)       /*!< 0x08000000 */
-#define RTC_ALRMASSR_SS_Pos            (0U)   
-#define RTC_ALRMASSR_SS_Msk            (0x7FFFUL << RTC_ALRMASSR_SS_Pos)        /*!< 0x00007FFF */
-#define RTC_ALRMASSR_SS                RTC_ALRMASSR_SS_Msk                     
-
-/********************  Bits definition for RTC_ALRMBSSR register  *************/
-#define RTC_ALRMBSSR_MASKSS_Pos        (24U)  
-#define RTC_ALRMBSSR_MASKSS_Msk        (0xFUL << RTC_ALRMBSSR_MASKSS_Pos)       /*!< 0x0F000000 */
-#define RTC_ALRMBSSR_MASKSS            RTC_ALRMBSSR_MASKSS_Msk                 
-#define RTC_ALRMBSSR_MASKSS_0          (0x1UL << RTC_ALRMBSSR_MASKSS_Pos)       /*!< 0x01000000 */
-#define RTC_ALRMBSSR_MASKSS_1          (0x2UL << RTC_ALRMBSSR_MASKSS_Pos)       /*!< 0x02000000 */
-#define RTC_ALRMBSSR_MASKSS_2          (0x4UL << RTC_ALRMBSSR_MASKSS_Pos)       /*!< 0x04000000 */
-#define RTC_ALRMBSSR_MASKSS_3          (0x8UL << RTC_ALRMBSSR_MASKSS_Pos)       /*!< 0x08000000 */
-#define RTC_ALRMBSSR_SS_Pos            (0U)   
-#define RTC_ALRMBSSR_SS_Msk            (0x7FFFUL << RTC_ALRMBSSR_SS_Pos)        /*!< 0x00007FFF */
-#define RTC_ALRMBSSR_SS                RTC_ALRMBSSR_SS_Msk                     
-
-/********************  Bits definition for RTC_OR register  ****************/
-#define RTC_OR_OUT_RMP_Pos             (1U)   
-#define RTC_OR_OUT_RMP_Msk             (0x1UL << RTC_OR_OUT_RMP_Pos)            /*!< 0x00000002 */
-#define RTC_OR_OUT_RMP                 RTC_OR_OUT_RMP_Msk                      /*!<  */
-#define RTC_OR_ALARMOUTTYPE_Pos        (0U)   
-#define RTC_OR_ALARMOUTTYPE_Msk        (0x1UL << RTC_OR_ALARMOUTTYPE_Pos)       /*!< 0x00000001 */
-#define RTC_OR_ALARMOUTTYPE            RTC_OR_ALARMOUTTYPE_Msk                 /*!<  */
-
-/* Legacy defines */
-#define RTC_OR_RTC_OUT_RMP                   RTC_OR_OUT_RMP
-
-/********************  Bits definition for RTC_BKP0R register  ****************/
-#define RTC_BKP0R_Pos                  (0U)   
-#define RTC_BKP0R_Msk                  (0xFFFFFFFFUL << RTC_BKP0R_Pos)          /*!< 0xFFFFFFFF */
-#define RTC_BKP0R                      RTC_BKP0R_Msk                           /*!<  */
-
-/********************  Bits definition for RTC_BKP1R register  ****************/
-#define RTC_BKP1R_Pos                  (0U)   
-#define RTC_BKP1R_Msk                  (0xFFFFFFFFUL << RTC_BKP1R_Pos)          /*!< 0xFFFFFFFF */
-#define RTC_BKP1R                      RTC_BKP1R_Msk                           /*!<  */
-
-/********************  Bits definition for RTC_BKP2R register  ****************/
-#define RTC_BKP2R_Pos                  (0U)   
-#define RTC_BKP2R_Msk                  (0xFFFFFFFFUL << RTC_BKP2R_Pos)          /*!< 0xFFFFFFFF */
-#define RTC_BKP2R                      RTC_BKP2R_Msk                           /*!<  */
-
-/********************  Bits definition for RTC_BKP3R register  ****************/
-#define RTC_BKP3R_Pos                  (0U)   
-#define RTC_BKP3R_Msk                  (0xFFFFFFFFUL << RTC_BKP3R_Pos)          /*!< 0xFFFFFFFF */
-#define RTC_BKP3R                      RTC_BKP3R_Msk                           /*!<  */
-
-/********************  Bits definition for RTC_BKP4R register  ****************/
-#define RTC_BKP4R_Pos                  (0U)   
-#define RTC_BKP4R_Msk                  (0xFFFFFFFFUL << RTC_BKP4R_Pos)          /*!< 0xFFFFFFFF */
-#define RTC_BKP4R                      RTC_BKP4R_Msk                           /*!<  */
-
-/******************** Number of backup registers ******************************/
-#define RTC_BKP_NUMBER                       (0x00000005U)                  /*!<  */
-
-/******************************************************************************/
-/*                                                                            */
-/*                        Serial Peripheral Interface (SPI)                   */
-/*                                                                            */
-/******************************************************************************/
-
-/*
- * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
- */
-#define SPI_I2S_SUPPORT                       /*!< I2S support */
-
-/*******************  Bit definition for SPI_CR1 register  ********************/
-#define SPI_CR1_CPHA_Pos            (0U)      
-#define SPI_CR1_CPHA_Msk            (0x1UL << SPI_CR1_CPHA_Pos)                 /*!< 0x00000001 */
-#define SPI_CR1_CPHA                SPI_CR1_CPHA_Msk                           /*!< Clock Phase */
-#define SPI_CR1_CPOL_Pos            (1U)      
-#define SPI_CR1_CPOL_Msk            (0x1UL << SPI_CR1_CPOL_Pos)                 /*!< 0x00000002 */
-#define SPI_CR1_CPOL                SPI_CR1_CPOL_Msk                           /*!< Clock Polarity */
-#define SPI_CR1_MSTR_Pos            (2U)      
-#define SPI_CR1_MSTR_Msk            (0x1UL << SPI_CR1_MSTR_Pos)                 /*!< 0x00000004 */
-#define SPI_CR1_MSTR                SPI_CR1_MSTR_Msk                           /*!< Master Selection */
-#define SPI_CR1_BR_Pos              (3U)      
-#define SPI_CR1_BR_Msk              (0x7UL << SPI_CR1_BR_Pos)                   /*!< 0x00000038 */
-#define SPI_CR1_BR                  SPI_CR1_BR_Msk                             /*!< BR[2:0] bits (Baud Rate Control) */
-#define SPI_CR1_BR_0                (0x1UL << SPI_CR1_BR_Pos)                   /*!< 0x00000008 */
-#define SPI_CR1_BR_1                (0x2UL << SPI_CR1_BR_Pos)                   /*!< 0x00000010 */
-#define SPI_CR1_BR_2                (0x4UL << SPI_CR1_BR_Pos)                   /*!< 0x00000020 */
-#define SPI_CR1_SPE_Pos             (6U)      
-#define SPI_CR1_SPE_Msk             (0x1UL << SPI_CR1_SPE_Pos)                  /*!< 0x00000040 */
-#define SPI_CR1_SPE                 SPI_CR1_SPE_Msk                            /*!< SPI Enable */
-#define SPI_CR1_LSBFIRST_Pos        (7U)      
-#define SPI_CR1_LSBFIRST_Msk        (0x1UL << SPI_CR1_LSBFIRST_Pos)             /*!< 0x00000080 */
-#define SPI_CR1_LSBFIRST            SPI_CR1_LSBFIRST_Msk                       /*!< Frame Format */
-#define SPI_CR1_SSI_Pos             (8U)      
-#define SPI_CR1_SSI_Msk             (0x1UL << SPI_CR1_SSI_Pos)                  /*!< 0x00000100 */
-#define SPI_CR1_SSI                 SPI_CR1_SSI_Msk                            /*!< Internal slave select */
-#define SPI_CR1_SSM_Pos             (9U)      
-#define SPI_CR1_SSM_Msk             (0x1UL << SPI_CR1_SSM_Pos)                  /*!< 0x00000200 */
-#define SPI_CR1_SSM                 SPI_CR1_SSM_Msk                            /*!< Software slave management */
-#define SPI_CR1_RXONLY_Pos          (10U)     
-#define SPI_CR1_RXONLY_Msk          (0x1UL << SPI_CR1_RXONLY_Pos)               /*!< 0x00000400 */
-#define SPI_CR1_RXONLY              SPI_CR1_RXONLY_Msk                         /*!< Receive only */
-#define SPI_CR1_DFF_Pos             (11U)     
-#define SPI_CR1_DFF_Msk             (0x1UL << SPI_CR1_DFF_Pos)                  /*!< 0x00000800 */
-#define SPI_CR1_DFF                 SPI_CR1_DFF_Msk                            /*!< Data Frame Format */
-#define SPI_CR1_CRCNEXT_Pos         (12U)     
-#define SPI_CR1_CRCNEXT_Msk         (0x1UL << SPI_CR1_CRCNEXT_Pos)              /*!< 0x00001000 */
-#define SPI_CR1_CRCNEXT             SPI_CR1_CRCNEXT_Msk                        /*!< Transmit CRC next */
-#define SPI_CR1_CRCEN_Pos           (13U)     
-#define SPI_CR1_CRCEN_Msk           (0x1UL << SPI_CR1_CRCEN_Pos)                /*!< 0x00002000 */
-#define SPI_CR1_CRCEN               SPI_CR1_CRCEN_Msk                          /*!< Hardware CRC calculation enable */
-#define SPI_CR1_BIDIOE_Pos          (14U)     
-#define SPI_CR1_BIDIOE_Msk          (0x1UL << SPI_CR1_BIDIOE_Pos)               /*!< 0x00004000 */
-#define SPI_CR1_BIDIOE              SPI_CR1_BIDIOE_Msk                         /*!< Output enable in bidirectional mode */
-#define SPI_CR1_BIDIMODE_Pos        (15U)     
-#define SPI_CR1_BIDIMODE_Msk        (0x1UL << SPI_CR1_BIDIMODE_Pos)             /*!< 0x00008000 */
-#define SPI_CR1_BIDIMODE            SPI_CR1_BIDIMODE_Msk                       /*!< Bidirectional data mode enable */
-
-/*******************  Bit definition for SPI_CR2 register  ********************/
-#define SPI_CR2_RXDMAEN_Pos         (0U)      
-#define SPI_CR2_RXDMAEN_Msk         (0x1UL << SPI_CR2_RXDMAEN_Pos)              /*!< 0x00000001 */
-#define SPI_CR2_RXDMAEN             SPI_CR2_RXDMAEN_Msk                        /*!< Rx Buffer DMA Enable */
-#define SPI_CR2_TXDMAEN_Pos         (1U)      
-#define SPI_CR2_TXDMAEN_Msk         (0x1UL << SPI_CR2_TXDMAEN_Pos)              /*!< 0x00000002 */
-#define SPI_CR2_TXDMAEN             SPI_CR2_TXDMAEN_Msk                        /*!< Tx Buffer DMA Enable */
-#define SPI_CR2_SSOE_Pos            (2U)      
-#define SPI_CR2_SSOE_Msk            (0x1UL << SPI_CR2_SSOE_Pos)                 /*!< 0x00000004 */
-#define SPI_CR2_SSOE                SPI_CR2_SSOE_Msk                           /*!< SS Output Enable */
-#define SPI_CR2_FRF_Pos             (4U)      
-#define SPI_CR2_FRF_Msk             (0x1UL << SPI_CR2_FRF_Pos)                  /*!< 0x00000010 */
-#define SPI_CR2_FRF                 SPI_CR2_FRF_Msk                            /*!< Frame Format Enable */
-#define SPI_CR2_ERRIE_Pos           (5U)      
-#define SPI_CR2_ERRIE_Msk           (0x1UL << SPI_CR2_ERRIE_Pos)                /*!< 0x00000020 */
-#define SPI_CR2_ERRIE               SPI_CR2_ERRIE_Msk                          /*!< Error Interrupt Enable */
-#define SPI_CR2_RXNEIE_Pos          (6U)      
-#define SPI_CR2_RXNEIE_Msk          (0x1UL << SPI_CR2_RXNEIE_Pos)               /*!< 0x00000040 */
-#define SPI_CR2_RXNEIE              SPI_CR2_RXNEIE_Msk                         /*!< RX buffer Not Empty Interrupt Enable */
-#define SPI_CR2_TXEIE_Pos           (7U)      
-#define SPI_CR2_TXEIE_Msk           (0x1UL << SPI_CR2_TXEIE_Pos)                /*!< 0x00000080 */
-#define SPI_CR2_TXEIE               SPI_CR2_TXEIE_Msk                          /*!< Tx buffer Empty Interrupt Enable */
-
-/********************  Bit definition for SPI_SR register  ********************/
-#define SPI_SR_RXNE_Pos             (0U)      
-#define SPI_SR_RXNE_Msk             (0x1UL << SPI_SR_RXNE_Pos)                  /*!< 0x00000001 */
-#define SPI_SR_RXNE                 SPI_SR_RXNE_Msk                            /*!< Receive buffer Not Empty */
-#define SPI_SR_TXE_Pos              (1U)      
-#define SPI_SR_TXE_Msk              (0x1UL << SPI_SR_TXE_Pos)                   /*!< 0x00000002 */
-#define SPI_SR_TXE                  SPI_SR_TXE_Msk                             /*!< Transmit buffer Empty */
-#define SPI_SR_CHSIDE_Pos           (2U)      
-#define SPI_SR_CHSIDE_Msk           (0x1UL << SPI_SR_CHSIDE_Pos)                /*!< 0x00000004 */
-#define SPI_SR_CHSIDE               SPI_SR_CHSIDE_Msk                          /*!< Channel side */
-#define SPI_SR_UDR_Pos              (3U)      
-#define SPI_SR_UDR_Msk              (0x1UL << SPI_SR_UDR_Pos)                   /*!< 0x00000008 */
-#define SPI_SR_UDR                  SPI_SR_UDR_Msk                             /*!< Underrun flag */
-#define SPI_SR_CRCERR_Pos           (4U)      
-#define SPI_SR_CRCERR_Msk           (0x1UL << SPI_SR_CRCERR_Pos)                /*!< 0x00000010 */
-#define SPI_SR_CRCERR               SPI_SR_CRCERR_Msk                          /*!< CRC Error flag */
-#define SPI_SR_MODF_Pos             (5U)      
-#define SPI_SR_MODF_Msk             (0x1UL << SPI_SR_MODF_Pos)                  /*!< 0x00000020 */
-#define SPI_SR_MODF                 SPI_SR_MODF_Msk                            /*!< Mode fault */
-#define SPI_SR_OVR_Pos              (6U)      
-#define SPI_SR_OVR_Msk              (0x1UL << SPI_SR_OVR_Pos)                   /*!< 0x00000040 */
-#define SPI_SR_OVR                  SPI_SR_OVR_Msk                             /*!< Overrun flag */
-#define SPI_SR_BSY_Pos              (7U)      
-#define SPI_SR_BSY_Msk              (0x1UL << SPI_SR_BSY_Pos)                   /*!< 0x00000080 */
-#define SPI_SR_BSY                  SPI_SR_BSY_Msk                             /*!< Busy flag */
-#define SPI_SR_FRE_Pos              (8U)      
-#define SPI_SR_FRE_Msk              (0x1UL << SPI_SR_FRE_Pos)                   /*!< 0x00000100 */
-#define SPI_SR_FRE                  SPI_SR_FRE_Msk                             /*!< TI frame format error */  
-
-/********************  Bit definition for SPI_DR register  ********************/
-#define SPI_DR_DR_Pos               (0U)      
-#define SPI_DR_DR_Msk               (0xFFFFUL << SPI_DR_DR_Pos)                 /*!< 0x0000FFFF */
-#define SPI_DR_DR                   SPI_DR_DR_Msk                              /*!< Data Register */
-
-/*******************  Bit definition for SPI_CRCPR register  ******************/
-#define SPI_CRCPR_CRCPOLY_Pos       (0U)      
-#define SPI_CRCPR_CRCPOLY_Msk       (0xFFFFUL << SPI_CRCPR_CRCPOLY_Pos)         /*!< 0x0000FFFF */
-#define SPI_CRCPR_CRCPOLY           SPI_CRCPR_CRCPOLY_Msk                      /*!< CRC polynomial register */
-
-/******************  Bit definition for SPI_RXCRCR register  ******************/
-#define SPI_RXCRCR_RXCRC_Pos        (0U)      
-#define SPI_RXCRCR_RXCRC_Msk        (0xFFFFUL << SPI_RXCRCR_RXCRC_Pos)          /*!< 0x0000FFFF */
-#define SPI_RXCRCR_RXCRC            SPI_RXCRCR_RXCRC_Msk                       /*!< Rx CRC Register */
-
-/******************  Bit definition for SPI_TXCRCR register  ******************/
-#define SPI_TXCRCR_TXCRC_Pos        (0U)      
-#define SPI_TXCRCR_TXCRC_Msk        (0xFFFFUL << SPI_TXCRCR_TXCRC_Pos)          /*!< 0x0000FFFF */
-#define SPI_TXCRCR_TXCRC            SPI_TXCRCR_TXCRC_Msk                       /*!< Tx CRC Register */
-
-/******************  Bit definition for SPI_I2SCFGR register  *****************/
-#define SPI_I2SCFGR_CHLEN_Pos       (0U)      
-#define SPI_I2SCFGR_CHLEN_Msk       (0x1UL << SPI_I2SCFGR_CHLEN_Pos)            /*!< 0x00000001 */
-#define SPI_I2SCFGR_CHLEN           SPI_I2SCFGR_CHLEN_Msk                      /*!<Channel length (number of bits per audio channel) */
-#define SPI_I2SCFGR_DATLEN_Pos      (1U)      
-#define SPI_I2SCFGR_DATLEN_Msk      (0x3UL << SPI_I2SCFGR_DATLEN_Pos)           /*!< 0x00000006 */
-#define SPI_I2SCFGR_DATLEN          SPI_I2SCFGR_DATLEN_Msk                     /*!<DATLEN[1:0] bits (Data length to be transferred) */
-#define SPI_I2SCFGR_DATLEN_0        (0x1UL << SPI_I2SCFGR_DATLEN_Pos)           /*!< 0x00000002 */
-#define SPI_I2SCFGR_DATLEN_1        (0x2UL << SPI_I2SCFGR_DATLEN_Pos)           /*!< 0x00000004 */
-#define SPI_I2SCFGR_CKPOL_Pos       (3U)      
-#define SPI_I2SCFGR_CKPOL_Msk       (0x1UL << SPI_I2SCFGR_CKPOL_Pos)            /*!< 0x00000008 */
-#define SPI_I2SCFGR_CKPOL           SPI_I2SCFGR_CKPOL_Msk                      /*!<steady state clock polarity */
-#define SPI_I2SCFGR_I2SSTD_Pos      (4U)      
-#define SPI_I2SCFGR_I2SSTD_Msk      (0x3UL << SPI_I2SCFGR_I2SSTD_Pos)           /*!< 0x00000030 */
-#define SPI_I2SCFGR_I2SSTD          SPI_I2SCFGR_I2SSTD_Msk                     /*!<I2SSTD[1:0] bits (I2S standard selection) */
-#define SPI_I2SCFGR_I2SSTD_0        (0x1UL << SPI_I2SCFGR_I2SSTD_Pos)           /*!< 0x00000010 */
-#define SPI_I2SCFGR_I2SSTD_1        (0x2UL << SPI_I2SCFGR_I2SSTD_Pos)           /*!< 0x00000020 */
-#define SPI_I2SCFGR_PCMSYNC_Pos     (7U)      
-#define SPI_I2SCFGR_PCMSYNC_Msk     (0x1UL << SPI_I2SCFGR_PCMSYNC_Pos)          /*!< 0x00000080 */
-#define SPI_I2SCFGR_PCMSYNC         SPI_I2SCFGR_PCMSYNC_Msk                    /*!<PCM frame synchronization */
-#define SPI_I2SCFGR_I2SCFG_Pos      (8U)      
-#define SPI_I2SCFGR_I2SCFG_Msk      (0x3UL << SPI_I2SCFGR_I2SCFG_Pos)           /*!< 0x00000300 */
-#define SPI_I2SCFGR_I2SCFG          SPI_I2SCFGR_I2SCFG_Msk                     /*!<I2SCFG[1:0] bits (I2S configuration mode) */
-#define SPI_I2SCFGR_I2SCFG_0        (0x1UL << SPI_I2SCFGR_I2SCFG_Pos)           /*!< 0x00000100 */
-#define SPI_I2SCFGR_I2SCFG_1        (0x2UL << SPI_I2SCFGR_I2SCFG_Pos)           /*!< 0x00000200 */
-#define SPI_I2SCFGR_I2SE_Pos        (10U)     
-#define SPI_I2SCFGR_I2SE_Msk        (0x1UL << SPI_I2SCFGR_I2SE_Pos)             /*!< 0x00000400 */
-#define SPI_I2SCFGR_I2SE            SPI_I2SCFGR_I2SE_Msk                       /*!<I2S Enable */
-#define SPI_I2SCFGR_I2SMOD_Pos      (11U)     
-#define SPI_I2SCFGR_I2SMOD_Msk      (0x1UL << SPI_I2SCFGR_I2SMOD_Pos)           /*!< 0x00000800 */
-#define SPI_I2SCFGR_I2SMOD          SPI_I2SCFGR_I2SMOD_Msk                     /*!<I2S mode selection */
-/******************  Bit definition for SPI_I2SPR register  *******************/
-#define SPI_I2SPR_I2SDIV_Pos        (0U)      
-#define SPI_I2SPR_I2SDIV_Msk        (0xFFUL << SPI_I2SPR_I2SDIV_Pos)            /*!< 0x000000FF */
-#define SPI_I2SPR_I2SDIV            SPI_I2SPR_I2SDIV_Msk                       /*!<I2S Linear prescaler */
-#define SPI_I2SPR_ODD_Pos           (8U)      
-#define SPI_I2SPR_ODD_Msk           (0x1UL << SPI_I2SPR_ODD_Pos)                /*!< 0x00000100 */
-#define SPI_I2SPR_ODD               SPI_I2SPR_ODD_Msk                          /*!<Odd factor for the prescaler */
-#define SPI_I2SPR_MCKOE_Pos         (9U)      
-#define SPI_I2SPR_MCKOE_Msk         (0x1UL << SPI_I2SPR_MCKOE_Pos)              /*!< 0x00000200 */
-#define SPI_I2SPR_MCKOE             SPI_I2SPR_MCKOE_Msk                        /*!<Master Clock Output Enable */
-
-/******************************************************************************/
-/*                                                                            */
-/*                       System Configuration (SYSCFG)                        */
-/*                                                                            */
-/******************************************************************************/
-/*****************  Bit definition for SYSCFG_CFGR1 register  ****************/
-#define SYSCFG_CFGR1_MEM_MODE_Pos                (0U)                          
-#define SYSCFG_CFGR1_MEM_MODE_Msk                (0x3UL << SYSCFG_CFGR1_MEM_MODE_Pos) /*!< 0x00000003 */
-#define SYSCFG_CFGR1_MEM_MODE                    SYSCFG_CFGR1_MEM_MODE_Msk     /*!< SYSCFG_Memory Remap Config */
-#define SYSCFG_CFGR1_MEM_MODE_0                  (0x1UL << SYSCFG_CFGR1_MEM_MODE_Pos) /*!< 0x00000001 */
-#define SYSCFG_CFGR1_MEM_MODE_1                  (0x2UL << SYSCFG_CFGR1_MEM_MODE_Pos) /*!< 0x00000002 */
-#define SYSCFG_CFGR1_BOOT_MODE_Pos               (8U)                          
-#define SYSCFG_CFGR1_BOOT_MODE_Msk               (0x3UL << SYSCFG_CFGR1_BOOT_MODE_Pos) /*!< 0x00000300 */
-#define SYSCFG_CFGR1_BOOT_MODE                   SYSCFG_CFGR1_BOOT_MODE_Msk    /*!< SYSCFG_Boot mode Config */
-#define SYSCFG_CFGR1_BOOT_MODE_0                 (0x1UL << SYSCFG_CFGR1_BOOT_MODE_Pos) /*!< 0x00000100 */
-#define SYSCFG_CFGR1_BOOT_MODE_1                 (0x2UL << SYSCFG_CFGR1_BOOT_MODE_Pos) /*!< 0x00000200 */
-
-/*****************  Bit definition for SYSCFG_CFGR2 register  ****************/
-#define SYSCFG_CFGR2_FWDISEN_Pos                 (0U)                          
-#define SYSCFG_CFGR2_FWDISEN_Msk                 (0x1UL << SYSCFG_CFGR2_FWDISEN_Pos) /*!< 0x00000001 */
-#define SYSCFG_CFGR2_FWDISEN                     SYSCFG_CFGR2_FWDISEN_Msk      /*!< Firewall disable bit */
-#define SYSCFG_CFGR2_I2C_PB6_FMP_Pos             (8U)                          
-#define SYSCFG_CFGR2_I2C_PB6_FMP_Msk             (0x1UL << SYSCFG_CFGR2_I2C_PB6_FMP_Pos) /*!< 0x00000100 */
-#define SYSCFG_CFGR2_I2C_PB6_FMP                 SYSCFG_CFGR2_I2C_PB6_FMP_Msk  /*!< I2C PB6 Fast mode plus */
-#define SYSCFG_CFGR2_I2C_PB7_FMP_Pos             (9U)                          
-#define SYSCFG_CFGR2_I2C_PB7_FMP_Msk             (0x1UL << SYSCFG_CFGR2_I2C_PB7_FMP_Pos) /*!< 0x00000200 */
-#define SYSCFG_CFGR2_I2C_PB7_FMP                 SYSCFG_CFGR2_I2C_PB7_FMP_Msk  /*!< I2C PB7 Fast mode plus */
-#define SYSCFG_CFGR2_I2C_PB8_FMP_Pos             (10U)                         
-#define SYSCFG_CFGR2_I2C_PB8_FMP_Msk             (0x1UL << SYSCFG_CFGR2_I2C_PB8_FMP_Pos) /*!< 0x00000400 */
-#define SYSCFG_CFGR2_I2C_PB8_FMP                 SYSCFG_CFGR2_I2C_PB8_FMP_Msk  /*!< I2C PB8 Fast mode plus */
-#define SYSCFG_CFGR2_I2C_PB9_FMP_Pos             (11U)                         
-#define SYSCFG_CFGR2_I2C_PB9_FMP_Msk             (0x1UL << SYSCFG_CFGR2_I2C_PB9_FMP_Pos) /*!< 0x00000800 */
-#define SYSCFG_CFGR2_I2C_PB9_FMP                 SYSCFG_CFGR2_I2C_PB9_FMP_Msk  /*!< I2C PB9 Fast mode plus */
-#define SYSCFG_CFGR2_I2C1_FMP_Pos                (12U)                         
-#define SYSCFG_CFGR2_I2C1_FMP_Msk                (0x1UL << SYSCFG_CFGR2_I2C1_FMP_Pos) /*!< 0x00001000 */
-#define SYSCFG_CFGR2_I2C1_FMP                    SYSCFG_CFGR2_I2C1_FMP_Msk     /*!< I2C1 Fast mode plus */
-#define SYSCFG_CFGR2_I2C2_FMP_Pos                (13U)                         
-#define SYSCFG_CFGR2_I2C2_FMP_Msk                (0x1UL << SYSCFG_CFGR2_I2C2_FMP_Pos) /*!< 0x00002000 */
-#define SYSCFG_CFGR2_I2C2_FMP                    SYSCFG_CFGR2_I2C2_FMP_Msk     /*!< I2C2 Fast mode plus */
-
-/*****************  Bit definition for SYSCFG_EXTICR1 register  ***************/
-#define SYSCFG_EXTICR1_EXTI0_Pos                 (0U)                          
-#define SYSCFG_EXTICR1_EXTI0_Msk                 (0xFUL << SYSCFG_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */
-#define SYSCFG_EXTICR1_EXTI0                     SYSCFG_EXTICR1_EXTI0_Msk      /*!< EXTI 0 configuration */
-#define SYSCFG_EXTICR1_EXTI1_Pos                 (4U)                          
-#define SYSCFG_EXTICR1_EXTI1_Msk                 (0xFUL << SYSCFG_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */
-#define SYSCFG_EXTICR1_EXTI1                     SYSCFG_EXTICR1_EXTI1_Msk      /*!< EXTI 1 configuration */
-#define SYSCFG_EXTICR1_EXTI2_Pos                 (8U)                          
-#define SYSCFG_EXTICR1_EXTI2_Msk                 (0xFUL << SYSCFG_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */
-#define SYSCFG_EXTICR1_EXTI2                     SYSCFG_EXTICR1_EXTI2_Msk      /*!< EXTI 2 configuration */
-#define SYSCFG_EXTICR1_EXTI3_Pos                 (12U)                         
-#define SYSCFG_EXTICR1_EXTI3_Msk                 (0xFUL << SYSCFG_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */
-#define SYSCFG_EXTICR1_EXTI3                     SYSCFG_EXTICR1_EXTI3_Msk      /*!< EXTI 3 configuration */
-
-/** 
-  * @brief  EXTI0 configuration  
-  */
-#define SYSCFG_EXTICR1_EXTI0_PA                  (0x00000000U)                 /*!< PA[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PB                  (0x00000001U)                 /*!< PB[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PC                  (0x00000002U)                 /*!< PC[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PH                  (0x00000005U)                 /*!< PH[0] pin */
-
-/** 
-  * @brief  EXTI1 configuration  
-  */ 
-#define SYSCFG_EXTICR1_EXTI1_PA                  (0x00000000U)                 /*!< PA[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PB                  (0x00000010U)                 /*!< PB[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PC                  (0x00000020U)                 /*!< PC[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PH                  (0x00000050U)                 /*!< PH[1] pin */
-
-/** 
-  * @brief  EXTI2 configuration  
-  */
-#define SYSCFG_EXTICR1_EXTI2_PA                  (0x00000000U)                 /*!< PA[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PB                  (0x00000100U)                 /*!< PB[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PC                  (0x00000200U)                 /*!< PC[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PD                  (0x00000300U)                 /*!< PD[2] pin */
-
-/** 
-  * @brief  EXTI3 configuration  
-  */
-#define SYSCFG_EXTICR1_EXTI3_PA                  (0x00000000U)                 /*!< PA[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PB                  (0x00001000U)                 /*!< PB[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PC                  (0x00002000U)                 /*!< PC[3] pin */
-
-/*****************  Bit definition for SYSCFG_EXTICR2 register  *****************/
-#define SYSCFG_EXTICR2_EXTI4_Pos                 (0U)                          
-#define SYSCFG_EXTICR2_EXTI4_Msk                 (0xFUL << SYSCFG_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */
-#define SYSCFG_EXTICR2_EXTI4                     SYSCFG_EXTICR2_EXTI4_Msk      /*!< EXTI 4 configuration */
-#define SYSCFG_EXTICR2_EXTI5_Pos                 (4U)                          
-#define SYSCFG_EXTICR2_EXTI5_Msk                 (0xFUL << SYSCFG_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */
-#define SYSCFG_EXTICR2_EXTI5                     SYSCFG_EXTICR2_EXTI5_Msk      /*!< EXTI 5 configuration */
-#define SYSCFG_EXTICR2_EXTI6_Pos                 (8U)                          
-#define SYSCFG_EXTICR2_EXTI6_Msk                 (0xFUL << SYSCFG_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */
-#define SYSCFG_EXTICR2_EXTI6                     SYSCFG_EXTICR2_EXTI6_Msk      /*!< EXTI 6 configuration */
-#define SYSCFG_EXTICR2_EXTI7_Pos                 (12U)                         
-#define SYSCFG_EXTICR2_EXTI7_Msk                 (0xFUL << SYSCFG_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */
-#define SYSCFG_EXTICR2_EXTI7                     SYSCFG_EXTICR2_EXTI7_Msk      /*!< EXTI 7 configuration */
-
-/** 
-  * @brief  EXTI4 configuration  
-  */
-#define SYSCFG_EXTICR2_EXTI4_PA                  (0x00000000U)                 /*!< PA[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PB                  (0x00000001U)                 /*!< PB[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PC                  (0x00000002U)                 /*!< PC[4] pin */
-
-/** 
-  * @brief  EXTI5 configuration  
-  */
-#define SYSCFG_EXTICR2_EXTI5_PA                  (0x00000000U)                 /*!< PA[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PB                  (0x00000010U)                 /*!< PB[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PC                  (0x00000020U)                 /*!< PC[5] pin */
-
-/** 
-  * @brief  EXTI6 configuration  
-  */
-#define SYSCFG_EXTICR2_EXTI6_PA                  (0x00000000U)                 /*!< PA[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PB                  (0x00000100U)                 /*!< PB[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PC                  (0x00000200U)                 /*!< PC[6] pin */
-
-/** 
-  * @brief  EXTI7 configuration  
-  */
-#define SYSCFG_EXTICR2_EXTI7_PA                  (0x00000000U)                 /*!< PA[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PB                  (0x00001000U)                 /*!< PB[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PC                  (0x00002000U)                 /*!< PC[7] pin */
-
-/*****************  Bit definition for SYSCFG_EXTICR3 register  *****************/
-#define SYSCFG_EXTICR3_EXTI8_Pos                 (0U)                          
-#define SYSCFG_EXTICR3_EXTI8_Msk                 (0xFUL << SYSCFG_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */
-#define SYSCFG_EXTICR3_EXTI8                     SYSCFG_EXTICR3_EXTI8_Msk      /*!< EXTI 8 configuration */
-#define SYSCFG_EXTICR3_EXTI9_Pos                 (4U)                          
-#define SYSCFG_EXTICR3_EXTI9_Msk                 (0xFUL << SYSCFG_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */
-#define SYSCFG_EXTICR3_EXTI9                     SYSCFG_EXTICR3_EXTI9_Msk      /*!< EXTI 9 configuration */
-#define SYSCFG_EXTICR3_EXTI10_Pos                (8U)                          
-#define SYSCFG_EXTICR3_EXTI10_Msk                (0xFUL << SYSCFG_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */
-#define SYSCFG_EXTICR3_EXTI10                    SYSCFG_EXTICR3_EXTI10_Msk     /*!< EXTI 10 configuration */
-#define SYSCFG_EXTICR3_EXTI11_Pos                (12U)                         
-#define SYSCFG_EXTICR3_EXTI11_Msk                (0xFUL << SYSCFG_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */
-#define SYSCFG_EXTICR3_EXTI11                    SYSCFG_EXTICR3_EXTI11_Msk     /*!< EXTI 11 configuration */
-
-/** 
-  * @brief  EXTI8 configuration  
-  */
-#define SYSCFG_EXTICR3_EXTI8_PA                  (0x00000000U)                 /*!< PA[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PB                  (0x00000001U)                 /*!< PB[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PC                  (0x00000002U)                 /*!< PC[8] pin */
-
-/** 
-  * @brief  EXTI9 configuration  
-  */
-#define SYSCFG_EXTICR3_EXTI9_PA                  (0x00000000U)                 /*!< PA[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PB                  (0x00000010U)                 /*!< PB[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PC                  (0x00000020U)                 /*!< PC[9] pin */
-
-/** 
-  * @brief  EXTI10 configuration  
-  */
-#define SYSCFG_EXTICR3_EXTI10_PA                 (0x00000000U)                 /*!< PA[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PB                 (0x00000100U)                 /*!< PB[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PC                 (0x00000200U)                 /*!< PC[10] pin */
-
-/** 
-  * @brief  EXTI11 configuration  
-  */
-#define SYSCFG_EXTICR3_EXTI11_PA                 (0x00000000U)                 /*!< PA[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PB                 (0x00001000U)                 /*!< PB[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PC                 (0x00002000U)                 /*!< PC[11] pin */
-
-/*****************  Bit definition for SYSCFG_EXTICR4 register  *****************/
-#define SYSCFG_EXTICR4_EXTI12_Pos                (0U)                          
-#define SYSCFG_EXTICR4_EXTI12_Msk                (0xFUL << SYSCFG_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */
-#define SYSCFG_EXTICR4_EXTI12                    SYSCFG_EXTICR4_EXTI12_Msk     /*!< EXTI 12 configuration */
-#define SYSCFG_EXTICR4_EXTI13_Pos                (4U)                          
-#define SYSCFG_EXTICR4_EXTI13_Msk                (0xFUL << SYSCFG_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */
-#define SYSCFG_EXTICR4_EXTI13                    SYSCFG_EXTICR4_EXTI13_Msk     /*!< EXTI 13 configuration */
-#define SYSCFG_EXTICR4_EXTI14_Pos                (8U)                          
-#define SYSCFG_EXTICR4_EXTI14_Msk                (0xFUL << SYSCFG_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */
-#define SYSCFG_EXTICR4_EXTI14                    SYSCFG_EXTICR4_EXTI14_Msk     /*!< EXTI 14 configuration */
-#define SYSCFG_EXTICR4_EXTI15_Pos                (12U)                         
-#define SYSCFG_EXTICR4_EXTI15_Msk                (0xFUL << SYSCFG_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */
-#define SYSCFG_EXTICR4_EXTI15                    SYSCFG_EXTICR4_EXTI15_Msk     /*!< EXTI 15 configuration */
-
-/** 
-  * @brief  EXTI12 configuration  
-  */
-#define SYSCFG_EXTICR4_EXTI12_PA                 (0x00000000U)                 /*!< PA[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PB                 (0x00000001U)                 /*!< PB[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PC                 (0x00000002U)                 /*!< PC[12] pin */
-
-/** 
-  * @brief  EXTI13 configuration  
-  */
-#define SYSCFG_EXTICR4_EXTI13_PA                 (0x00000000U)                 /*!< PA[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PB                 (0x00000010U)                 /*!< PB[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PC                 (0x00000020U)                 /*!< PC[13] pin */
-
-/** 
-  * @brief  EXTI14 configuration  
-  */
-#define SYSCFG_EXTICR4_EXTI14_PA                 (0x00000000U)                 /*!< PA[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PB                 (0x00000100U)                 /*!< PB[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PC                 (0x00000200U)                 /*!< PC[14] pin */
-
-/** 
-  * @brief  EXTI15 configuration  
-  */
-#define SYSCFG_EXTICR4_EXTI15_PA                 (0x00000000U)                 /*!< PA[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PB                 (0x00001000U)                 /*!< PB[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PC                 (0x00002000U)                 /*!< PC[15] pin */
-
-
-/*****************  Bit definition for SYSCFG_CFGR3 register  ****************/
-#define SYSCFG_CFGR3_EN_VREFINT_Pos              (0U)                          
-#define SYSCFG_CFGR3_EN_VREFINT_Msk              (0x1UL << SYSCFG_CFGR3_EN_VREFINT_Pos) /*!< 0x00000100 */
-#define SYSCFG_CFGR3_EN_VREFINT                  SYSCFG_CFGR3_EN_VREFINT_Msk /*!< Vref Enable bit */
-#define SYSCFG_CFGR3_VREF_OUT_Pos                (4U)                          
-#define SYSCFG_CFGR3_VREF_OUT_Msk                (0x3UL << SYSCFG_CFGR3_VREF_OUT_Pos) /*!< 0x00000030 */
-#define SYSCFG_CFGR3_VREF_OUT                    SYSCFG_CFGR3_VREF_OUT_Msk     /*!< Verf_ADC connection bit */
-#define SYSCFG_CFGR3_VREF_OUT_0                  (0x1UL << SYSCFG_CFGR3_VREF_OUT_Pos) /*!< 0x00000010 */
-#define SYSCFG_CFGR3_VREF_OUT_1                  (0x2UL << SYSCFG_CFGR3_VREF_OUT_Pos) /*!< 0x00000020 */
-#define SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Pos       (8U)                          
-#define SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Msk       (0x1UL << SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Pos) /*!< 0x00000100 */
-#define SYSCFG_CFGR3_ENBUF_VREFINT_ADC           SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Msk /*!< VREFINT reference for ADC enable bit */
-#define SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Pos        (9U)                          
-#define SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Msk        (0x1UL << SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Pos) /*!< 0x00000200 */
-#define SYSCFG_CFGR3_ENBUF_SENSOR_ADC            SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Msk /*!< Sensor reference for ADC enable bit */
-#define SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Pos    (12U)                         
-#define SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Msk    (0x1UL << SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Pos) /*!< 0x00001000 */
-#define SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP        SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Msk /*!< VREFINT reference for comparator 2 enable bit */
-#define SYSCFG_CFGR3_VREFINT_RDYF_Pos            (30U)                         
-#define SYSCFG_CFGR3_VREFINT_RDYF_Msk            (0x1UL << SYSCFG_CFGR3_VREFINT_RDYF_Pos) /*!< 0x40000000 */
-#define SYSCFG_CFGR3_VREFINT_RDYF                SYSCFG_CFGR3_VREFINT_RDYF_Msk /*!< VREFINT ready flag */
-#define SYSCFG_CFGR3_REF_LOCK_Pos                (31U)                         
-#define SYSCFG_CFGR3_REF_LOCK_Msk                (0x1UL << SYSCFG_CFGR3_REF_LOCK_Pos) /*!< 0x80000000 */
-#define SYSCFG_CFGR3_REF_LOCK                    SYSCFG_CFGR3_REF_LOCK_Msk     /*!< CFGR3 lock bit */
-
-/* Legacy defines */
-
-#define SYSCFG_CFGR3_EN_BGAP                  SYSCFG_CFGR3_EN_VREFINT
-#define SYSCFG_CFGR3_ENBUF_BGAP_ADC           SYSCFG_CFGR3_ENBUF_VREFINT_ADC
-#define SYSCFG_CFGR3_ENBUFLP_BGAP_COMP        SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP
-#define SYSCFG_VREFINT_ADC_RDYF               SYSCFG_CFGR3_VREFINT_RDYF
-#define SYSCFG_CFGR3_SENSOR_ADC_RDYF          SYSCFG_CFGR3_VREFINT_RDYF
-#define SYSCFG_CFGR3_VREFINT_ADC_RDYF         SYSCFG_CFGR3_VREFINT_RDYF
-#define SYSCFG_CFGR3_VREFINT_COMP_RDYF        SYSCFG_CFGR3_VREFINT_RDYF
-
-/******************************************************************************/
-/*                                                                            */
-/*                               Timers (TIM)*/
-/*                                                                            */
-/******************************************************************************/
-/*
-* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
-*/
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
-
-/*******************  Bit definition for TIM_CR1 register  ********************/
-#define TIM_CR1_CEN_Pos           (0U)        
-#define TIM_CR1_CEN_Msk           (0x1UL << TIM_CR1_CEN_Pos)                    /*!< 0x00000001 */
-#define TIM_CR1_CEN               TIM_CR1_CEN_Msk                              /*!<Counter enable */
-#define TIM_CR1_UDIS_Pos          (1U)        
-#define TIM_CR1_UDIS_Msk          (0x1UL << TIM_CR1_UDIS_Pos)                   /*!< 0x00000002 */
-#define TIM_CR1_UDIS              TIM_CR1_UDIS_Msk                             /*!<Update disable */
-#define TIM_CR1_URS_Pos           (2U)        
-#define TIM_CR1_URS_Msk           (0x1UL << TIM_CR1_URS_Pos)                    /*!< 0x00000004 */
-#define TIM_CR1_URS               TIM_CR1_URS_Msk                              /*!<Update request source */
-#define TIM_CR1_OPM_Pos           (3U)        
-#define TIM_CR1_OPM_Msk           (0x1UL << TIM_CR1_OPM_Pos)                    /*!< 0x00000008 */
-#define TIM_CR1_OPM               TIM_CR1_OPM_Msk                              /*!<One pulse mode */
-#define TIM_CR1_DIR_Pos           (4U)        
-#define TIM_CR1_DIR_Msk           (0x1UL << TIM_CR1_DIR_Pos)                    /*!< 0x00000010 */
-#define TIM_CR1_DIR               TIM_CR1_DIR_Msk                              /*!<Direction */
-
-#define TIM_CR1_CMS_Pos           (5U)        
-#define TIM_CR1_CMS_Msk           (0x3UL << TIM_CR1_CMS_Pos)                    /*!< 0x00000060 */
-#define TIM_CR1_CMS               TIM_CR1_CMS_Msk                              /*!<CMS[1:0] bits (Center-aligned mode selection) */
-#define TIM_CR1_CMS_0             (0x1UL << TIM_CR1_CMS_Pos)                    /*!< 0x00000020 */
-#define TIM_CR1_CMS_1             (0x2UL << TIM_CR1_CMS_Pos)                    /*!< 0x00000040 */
-
-#define TIM_CR1_ARPE_Pos          (7U)        
-#define TIM_CR1_ARPE_Msk          (0x1UL << TIM_CR1_ARPE_Pos)                   /*!< 0x00000080 */
-#define TIM_CR1_ARPE              TIM_CR1_ARPE_Msk                             /*!<Auto-reload preload enable */
-
-#define TIM_CR1_CKD_Pos           (8U)        
-#define TIM_CR1_CKD_Msk           (0x3UL << TIM_CR1_CKD_Pos)                    /*!< 0x00000300 */
-#define TIM_CR1_CKD               TIM_CR1_CKD_Msk                              /*!<CKD[1:0] bits (clock division) */
-#define TIM_CR1_CKD_0             (0x1UL << TIM_CR1_CKD_Pos)                    /*!< 0x00000100 */
-#define TIM_CR1_CKD_1             (0x2UL << TIM_CR1_CKD_Pos)                    /*!< 0x00000200 */
-
-/*******************  Bit definition for TIM_CR2 register  ********************/
-#define TIM_CR2_CCDS_Pos          (3U)        
-#define TIM_CR2_CCDS_Msk          (0x1UL << TIM_CR2_CCDS_Pos)                   /*!< 0x00000008 */
-#define TIM_CR2_CCDS              TIM_CR2_CCDS_Msk                             /*!<Capture/Compare DMA Selection */
-
-#define TIM_CR2_MMS_Pos           (4U)        
-#define TIM_CR2_MMS_Msk           (0x7UL << TIM_CR2_MMS_Pos)                    /*!< 0x00000070 */
-#define TIM_CR2_MMS               TIM_CR2_MMS_Msk                              /*!<MMS[2:0] bits (Master Mode Selection) */
-#define TIM_CR2_MMS_0             (0x1UL << TIM_CR2_MMS_Pos)                    /*!< 0x00000010 */
-#define TIM_CR2_MMS_1             (0x2UL << TIM_CR2_MMS_Pos)                    /*!< 0x00000020 */
-#define TIM_CR2_MMS_2             (0x4UL << TIM_CR2_MMS_Pos)                    /*!< 0x00000040 */
-
-#define TIM_CR2_TI1S_Pos          (7U)        
-#define TIM_CR2_TI1S_Msk          (0x1UL << TIM_CR2_TI1S_Pos)                   /*!< 0x00000080 */
-#define TIM_CR2_TI1S              TIM_CR2_TI1S_Msk                             /*!<TI1 Selection */
-
-/*******************  Bit definition for TIM_SMCR register  *******************/
-#define TIM_SMCR_SMS_Pos          (0U)        
-#define TIM_SMCR_SMS_Msk          (0x7UL << TIM_SMCR_SMS_Pos)                   /*!< 0x00000007 */
-#define TIM_SMCR_SMS              TIM_SMCR_SMS_Msk                             /*!<SMS[2:0] bits (Slave mode selection) */
-#define TIM_SMCR_SMS_0            (0x1UL << TIM_SMCR_SMS_Pos)                   /*!< 0x00000001 */
-#define TIM_SMCR_SMS_1            (0x2UL << TIM_SMCR_SMS_Pos)                   /*!< 0x00000002 */
-#define TIM_SMCR_SMS_2            (0x4UL << TIM_SMCR_SMS_Pos)                   /*!< 0x00000004 */
-
-#define TIM_SMCR_TS_Pos           (4U)        
-#define TIM_SMCR_TS_Msk           (0x7UL << TIM_SMCR_TS_Pos)                    /*!< 0x00000070 */
-#define TIM_SMCR_TS               TIM_SMCR_TS_Msk                              /*!<TS[2:0] bits (Trigger selection) */
-#define TIM_SMCR_TS_0             (0x1UL << TIM_SMCR_TS_Pos)                    /*!< 0x00000010 */
-#define TIM_SMCR_TS_1             (0x2UL << TIM_SMCR_TS_Pos)                    /*!< 0x00000020 */
-#define TIM_SMCR_TS_2             (0x4UL << TIM_SMCR_TS_Pos)                    /*!< 0x00000040 */
-
-#define TIM_SMCR_MSM_Pos          (7U)        
-#define TIM_SMCR_MSM_Msk          (0x1UL << TIM_SMCR_MSM_Pos)                   /*!< 0x00000080 */
-#define TIM_SMCR_MSM              TIM_SMCR_MSM_Msk                             /*!<Master/slave mode */
-
-#define TIM_SMCR_ETF_Pos          (8U)        
-#define TIM_SMCR_ETF_Msk          (0xFUL << TIM_SMCR_ETF_Pos)                   /*!< 0x00000F00 */
-#define TIM_SMCR_ETF              TIM_SMCR_ETF_Msk                             /*!<ETF[3:0] bits (External trigger filter) */
-#define TIM_SMCR_ETF_0            (0x1UL << TIM_SMCR_ETF_Pos)                   /*!< 0x00000100 */
-#define TIM_SMCR_ETF_1            (0x2UL << TIM_SMCR_ETF_Pos)                   /*!< 0x00000200 */
-#define TIM_SMCR_ETF_2            (0x4UL << TIM_SMCR_ETF_Pos)                   /*!< 0x00000400 */
-#define TIM_SMCR_ETF_3            (0x8UL << TIM_SMCR_ETF_Pos)                   /*!< 0x00000800 */
-
-#define TIM_SMCR_ETPS_Pos         (12U)       
-#define TIM_SMCR_ETPS_Msk         (0x3UL << TIM_SMCR_ETPS_Pos)                  /*!< 0x00003000 */
-#define TIM_SMCR_ETPS             TIM_SMCR_ETPS_Msk                            /*!<ETPS[1:0] bits (External trigger prescaler) */
-#define TIM_SMCR_ETPS_0           (0x1UL << TIM_SMCR_ETPS_Pos)                  /*!< 0x00001000 */
-#define TIM_SMCR_ETPS_1           (0x2UL << TIM_SMCR_ETPS_Pos)                  /*!< 0x00002000 */
-
-#define TIM_SMCR_ECE_Pos          (14U)       
-#define TIM_SMCR_ECE_Msk          (0x1UL << TIM_SMCR_ECE_Pos)                   /*!< 0x00004000 */
-#define TIM_SMCR_ECE              TIM_SMCR_ECE_Msk                             /*!<External clock enable */
-#define TIM_SMCR_ETP_Pos          (15U)       
-#define TIM_SMCR_ETP_Msk          (0x1UL << TIM_SMCR_ETP_Pos)                   /*!< 0x00008000 */
-#define TIM_SMCR_ETP              TIM_SMCR_ETP_Msk                             /*!<External trigger polarity */
-
-/*******************  Bit definition for TIM_DIER register  *******************/
-#define TIM_DIER_UIE_Pos          (0U)        
-#define TIM_DIER_UIE_Msk          (0x1UL << TIM_DIER_UIE_Pos)                   /*!< 0x00000001 */
-#define TIM_DIER_UIE              TIM_DIER_UIE_Msk                             /*!<Update interrupt enable */
-#define TIM_DIER_CC1IE_Pos        (1U)        
-#define TIM_DIER_CC1IE_Msk        (0x1UL << TIM_DIER_CC1IE_Pos)                 /*!< 0x00000002 */
-#define TIM_DIER_CC1IE            TIM_DIER_CC1IE_Msk                           /*!<Capture/Compare 1 interrupt enable */
-#define TIM_DIER_CC2IE_Pos        (2U)        
-#define TIM_DIER_CC2IE_Msk        (0x1UL << TIM_DIER_CC2IE_Pos)                 /*!< 0x00000004 */
-#define TIM_DIER_CC2IE            TIM_DIER_CC2IE_Msk                           /*!<Capture/Compare 2 interrupt enable */
-#define TIM_DIER_CC3IE_Pos        (3U)        
-#define TIM_DIER_CC3IE_Msk        (0x1UL << TIM_DIER_CC3IE_Pos)                 /*!< 0x00000008 */
-#define TIM_DIER_CC3IE            TIM_DIER_CC3IE_Msk                           /*!<Capture/Compare 3 interrupt enable */
-#define TIM_DIER_CC4IE_Pos        (4U)        
-#define TIM_DIER_CC4IE_Msk        (0x1UL << TIM_DIER_CC4IE_Pos)                 /*!< 0x00000010 */
-#define TIM_DIER_CC4IE            TIM_DIER_CC4IE_Msk                           /*!<Capture/Compare 4 interrupt enable */
-#define TIM_DIER_TIE_Pos          (6U)        
-#define TIM_DIER_TIE_Msk          (0x1UL << TIM_DIER_TIE_Pos)                   /*!< 0x00000040 */
-#define TIM_DIER_TIE              TIM_DIER_TIE_Msk                             /*!<Trigger interrupt enable */
-#define TIM_DIER_UDE_Pos          (8U)        
-#define TIM_DIER_UDE_Msk          (0x1UL << TIM_DIER_UDE_Pos)                   /*!< 0x00000100 */
-#define TIM_DIER_UDE              TIM_DIER_UDE_Msk                             /*!<Update DMA request enable */
-#define TIM_DIER_CC1DE_Pos        (9U)        
-#define TIM_DIER_CC1DE_Msk        (0x1UL << TIM_DIER_CC1DE_Pos)                 /*!< 0x00000200 */
-#define TIM_DIER_CC1DE            TIM_DIER_CC1DE_Msk                           /*!<Capture/Compare 1 DMA request enable */
-#define TIM_DIER_CC2DE_Pos        (10U)       
-#define TIM_DIER_CC2DE_Msk        (0x1UL << TIM_DIER_CC2DE_Pos)                 /*!< 0x00000400 */
-#define TIM_DIER_CC2DE            TIM_DIER_CC2DE_Msk                           /*!<Capture/Compare 2 DMA request enable */
-#define TIM_DIER_CC3DE_Pos        (11U)       
-#define TIM_DIER_CC3DE_Msk        (0x1UL << TIM_DIER_CC3DE_Pos)                 /*!< 0x00000800 */
-#define TIM_DIER_CC3DE            TIM_DIER_CC3DE_Msk                           /*!<Capture/Compare 3 DMA request enable */
-#define TIM_DIER_CC4DE_Pos        (12U)       
-#define TIM_DIER_CC4DE_Msk        (0x1UL << TIM_DIER_CC4DE_Pos)                 /*!< 0x00001000 */
-#define TIM_DIER_CC4DE            TIM_DIER_CC4DE_Msk                           /*!<Capture/Compare 4 DMA request enable */
-#define TIM_DIER_TDE_Pos          (14U)       
-#define TIM_DIER_TDE_Msk          (0x1UL << TIM_DIER_TDE_Pos)                   /*!< 0x00004000 */
-#define TIM_DIER_TDE              TIM_DIER_TDE_Msk                             /*!<Trigger DMA request enable */
-
-/********************  Bit definition for TIM_SR register  ********************/
-#define TIM_SR_UIF_Pos            (0U)        
-#define TIM_SR_UIF_Msk            (0x1UL << TIM_SR_UIF_Pos)                     /*!< 0x00000001 */
-#define TIM_SR_UIF                TIM_SR_UIF_Msk                               /*!<Update interrupt Flag */
-#define TIM_SR_CC1IF_Pos          (1U)        
-#define TIM_SR_CC1IF_Msk          (0x1UL << TIM_SR_CC1IF_Pos)                   /*!< 0x00000002 */
-#define TIM_SR_CC1IF              TIM_SR_CC1IF_Msk                             /*!<Capture/Compare 1 interrupt Flag */
-#define TIM_SR_CC2IF_Pos          (2U)        
-#define TIM_SR_CC2IF_Msk          (0x1UL << TIM_SR_CC2IF_Pos)                   /*!< 0x00000004 */
-#define TIM_SR_CC2IF              TIM_SR_CC2IF_Msk                             /*!<Capture/Compare 2 interrupt Flag */
-#define TIM_SR_CC3IF_Pos          (3U)        
-#define TIM_SR_CC3IF_Msk          (0x1UL << TIM_SR_CC3IF_Pos)                   /*!< 0x00000008 */
-#define TIM_SR_CC3IF              TIM_SR_CC3IF_Msk                             /*!<Capture/Compare 3 interrupt Flag */
-#define TIM_SR_CC4IF_Pos          (4U)        
-#define TIM_SR_CC4IF_Msk          (0x1UL << TIM_SR_CC4IF_Pos)                   /*!< 0x00000010 */
-#define TIM_SR_CC4IF              TIM_SR_CC4IF_Msk                             /*!<Capture/Compare 4 interrupt Flag */
-#define TIM_SR_TIF_Pos            (6U)        
-#define TIM_SR_TIF_Msk            (0x1UL << TIM_SR_TIF_Pos)                     /*!< 0x00000040 */
-#define TIM_SR_TIF                TIM_SR_TIF_Msk                               /*!<Trigger interrupt Flag */
-#define TIM_SR_CC1OF_Pos          (9U)        
-#define TIM_SR_CC1OF_Msk          (0x1UL << TIM_SR_CC1OF_Pos)                   /*!< 0x00000200 */
-#define TIM_SR_CC1OF              TIM_SR_CC1OF_Msk                             /*!<Capture/Compare 1 Overcapture Flag */
-#define TIM_SR_CC2OF_Pos          (10U)       
-#define TIM_SR_CC2OF_Msk          (0x1UL << TIM_SR_CC2OF_Pos)                   /*!< 0x00000400 */
-#define TIM_SR_CC2OF              TIM_SR_CC2OF_Msk                             /*!<Capture/Compare 2 Overcapture Flag */
-#define TIM_SR_CC3OF_Pos          (11U)       
-#define TIM_SR_CC3OF_Msk          (0x1UL << TIM_SR_CC3OF_Pos)                   /*!< 0x00000800 */
-#define TIM_SR_CC3OF              TIM_SR_CC3OF_Msk                             /*!<Capture/Compare 3 Overcapture Flag */
-#define TIM_SR_CC4OF_Pos          (12U)       
-#define TIM_SR_CC4OF_Msk          (0x1UL << TIM_SR_CC4OF_Pos)                   /*!< 0x00001000 */
-#define TIM_SR_CC4OF              TIM_SR_CC4OF_Msk                             /*!<Capture/Compare 4 Overcapture Flag */
-
-/*******************  Bit definition for TIM_EGR register  ********************/
-#define TIM_EGR_UG_Pos            (0U)        
-#define TIM_EGR_UG_Msk            (0x1UL << TIM_EGR_UG_Pos)                     /*!< 0x00000001 */
-#define TIM_EGR_UG                TIM_EGR_UG_Msk                               /*!<Update Generation */
-#define TIM_EGR_CC1G_Pos          (1U)        
-#define TIM_EGR_CC1G_Msk          (0x1UL << TIM_EGR_CC1G_Pos)                   /*!< 0x00000002 */
-#define TIM_EGR_CC1G              TIM_EGR_CC1G_Msk                             /*!<Capture/Compare 1 Generation */
-#define TIM_EGR_CC2G_Pos          (2U)        
-#define TIM_EGR_CC2G_Msk          (0x1UL << TIM_EGR_CC2G_Pos)                   /*!< 0x00000004 */
-#define TIM_EGR_CC2G              TIM_EGR_CC2G_Msk                             /*!<Capture/Compare 2 Generation */
-#define TIM_EGR_CC3G_Pos          (3U)        
-#define TIM_EGR_CC3G_Msk          (0x1UL << TIM_EGR_CC3G_Pos)                   /*!< 0x00000008 */
-#define TIM_EGR_CC3G              TIM_EGR_CC3G_Msk                             /*!<Capture/Compare 3 Generation */
-#define TIM_EGR_CC4G_Pos          (4U)        
-#define TIM_EGR_CC4G_Msk          (0x1UL << TIM_EGR_CC4G_Pos)                   /*!< 0x00000010 */
-#define TIM_EGR_CC4G              TIM_EGR_CC4G_Msk                             /*!<Capture/Compare 4 Generation */
-#define TIM_EGR_TG_Pos            (6U)        
-#define TIM_EGR_TG_Msk            (0x1UL << TIM_EGR_TG_Pos)                     /*!< 0x00000040 */
-#define TIM_EGR_TG                TIM_EGR_TG_Msk                               /*!<Trigger Generation */
-
-/******************  Bit definition for TIM_CCMR1 register  *******************/
-#define TIM_CCMR1_CC1S_Pos        (0U)        
-#define TIM_CCMR1_CC1S_Msk        (0x3UL << TIM_CCMR1_CC1S_Pos)                 /*!< 0x00000003 */
-#define TIM_CCMR1_CC1S            TIM_CCMR1_CC1S_Msk                           /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
-#define TIM_CCMR1_CC1S_0          (0x1UL << TIM_CCMR1_CC1S_Pos)                 /*!< 0x00000001 */
-#define TIM_CCMR1_CC1S_1          (0x2UL << TIM_CCMR1_CC1S_Pos)                 /*!< 0x00000002 */
-
-#define TIM_CCMR1_OC1FE_Pos       (2U)        
-#define TIM_CCMR1_OC1FE_Msk       (0x1UL << TIM_CCMR1_OC1FE_Pos)                /*!< 0x00000004 */
-#define TIM_CCMR1_OC1FE           TIM_CCMR1_OC1FE_Msk                          /*!<Output Compare 1 Fast enable */
-#define TIM_CCMR1_OC1PE_Pos       (3U)        
-#define TIM_CCMR1_OC1PE_Msk       (0x1UL << TIM_CCMR1_OC1PE_Pos)                /*!< 0x00000008 */
-#define TIM_CCMR1_OC1PE           TIM_CCMR1_OC1PE_Msk                          /*!<Output Compare 1 Preload enable */
-
-#define TIM_CCMR1_OC1M_Pos        (4U)        
-#define TIM_CCMR1_OC1M_Msk        (0x7UL << TIM_CCMR1_OC1M_Pos)                 /*!< 0x00000070 */
-#define TIM_CCMR1_OC1M            TIM_CCMR1_OC1M_Msk                           /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
-#define TIM_CCMR1_OC1M_0          (0x1UL << TIM_CCMR1_OC1M_Pos)                 /*!< 0x00000010 */
-#define TIM_CCMR1_OC1M_1          (0x2UL << TIM_CCMR1_OC1M_Pos)                 /*!< 0x00000020 */
-#define TIM_CCMR1_OC1M_2          (0x4UL << TIM_CCMR1_OC1M_Pos)                 /*!< 0x00000040 */
-
-#define TIM_CCMR1_OC1CE_Pos       (7U)        
-#define TIM_CCMR1_OC1CE_Msk       (0x1UL << TIM_CCMR1_OC1CE_Pos)                /*!< 0x00000080 */
-#define TIM_CCMR1_OC1CE           TIM_CCMR1_OC1CE_Msk                          /*!<Output Compare 1Clear Enable */
-
-#define TIM_CCMR1_CC2S_Pos        (8U)        
-#define TIM_CCMR1_CC2S_Msk        (0x3UL << TIM_CCMR1_CC2S_Pos)                 /*!< 0x00000300 */
-#define TIM_CCMR1_CC2S            TIM_CCMR1_CC2S_Msk                           /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
-#define TIM_CCMR1_CC2S_0          (0x1UL << TIM_CCMR1_CC2S_Pos)                 /*!< 0x00000100 */
-#define TIM_CCMR1_CC2S_1          (0x2UL << TIM_CCMR1_CC2S_Pos)                 /*!< 0x00000200 */
-
-#define TIM_CCMR1_OC2FE_Pos       (10U)       
-#define TIM_CCMR1_OC2FE_Msk       (0x1UL << TIM_CCMR1_OC2FE_Pos)                /*!< 0x00000400 */
-#define TIM_CCMR1_OC2FE           TIM_CCMR1_OC2FE_Msk                          /*!<Output Compare 2 Fast enable */
-#define TIM_CCMR1_OC2PE_Pos       (11U)       
-#define TIM_CCMR1_OC2PE_Msk       (0x1UL << TIM_CCMR1_OC2PE_Pos)                /*!< 0x00000800 */
-#define TIM_CCMR1_OC2PE           TIM_CCMR1_OC2PE_Msk                          /*!<Output Compare 2 Preload enable */
-
-#define TIM_CCMR1_OC2M_Pos        (12U)       
-#define TIM_CCMR1_OC2M_Msk        (0x7UL << TIM_CCMR1_OC2M_Pos)                 /*!< 0x00007000 */
-#define TIM_CCMR1_OC2M            TIM_CCMR1_OC2M_Msk                           /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
-#define TIM_CCMR1_OC2M_0          (0x1UL << TIM_CCMR1_OC2M_Pos)                 /*!< 0x00001000 */
-#define TIM_CCMR1_OC2M_1          (0x2UL << TIM_CCMR1_OC2M_Pos)                 /*!< 0x00002000 */
-#define TIM_CCMR1_OC2M_2          (0x4UL << TIM_CCMR1_OC2M_Pos)                 /*!< 0x00004000 */
-
-#define TIM_CCMR1_OC2CE_Pos       (15U)       
-#define TIM_CCMR1_OC2CE_Msk       (0x1UL << TIM_CCMR1_OC2CE_Pos)                /*!< 0x00008000 */
-#define TIM_CCMR1_OC2CE           TIM_CCMR1_OC2CE_Msk                          /*!<Output Compare 2 Clear Enable */
-
-/*----------------------------------------------------------------------------*/
-
-#define TIM_CCMR1_IC1PSC_Pos      (2U)        
-#define TIM_CCMR1_IC1PSC_Msk      (0x3UL << TIM_CCMR1_IC1PSC_Pos)               /*!< 0x0000000C */
-#define TIM_CCMR1_IC1PSC          TIM_CCMR1_IC1PSC_Msk                         /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
-#define TIM_CCMR1_IC1PSC_0        (0x1UL << TIM_CCMR1_IC1PSC_Pos)               /*!< 0x00000004 */
-#define TIM_CCMR1_IC1PSC_1        (0x2UL << TIM_CCMR1_IC1PSC_Pos)               /*!< 0x00000008 */
-
-#define TIM_CCMR1_IC1F_Pos        (4U)        
-#define TIM_CCMR1_IC1F_Msk        (0xFUL << TIM_CCMR1_IC1F_Pos)                 /*!< 0x000000F0 */
-#define TIM_CCMR1_IC1F            TIM_CCMR1_IC1F_Msk                           /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
-#define TIM_CCMR1_IC1F_0          (0x1UL << TIM_CCMR1_IC1F_Pos)                 /*!< 0x00000010 */
-#define TIM_CCMR1_IC1F_1          (0x2UL << TIM_CCMR1_IC1F_Pos)                 /*!< 0x00000020 */
-#define TIM_CCMR1_IC1F_2          (0x4UL << TIM_CCMR1_IC1F_Pos)                 /*!< 0x00000040 */
-#define TIM_CCMR1_IC1F_3          (0x8UL << TIM_CCMR1_IC1F_Pos)                 /*!< 0x00000080 */
-
-#define TIM_CCMR1_IC2PSC_Pos      (10U)       
-#define TIM_CCMR1_IC2PSC_Msk      (0x3UL << TIM_CCMR1_IC2PSC_Pos)               /*!< 0x00000C00 */
-#define TIM_CCMR1_IC2PSC          TIM_CCMR1_IC2PSC_Msk                         /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
-#define TIM_CCMR1_IC2PSC_0        (0x1UL << TIM_CCMR1_IC2PSC_Pos)               /*!< 0x00000400 */
-#define TIM_CCMR1_IC2PSC_1        (0x2UL << TIM_CCMR1_IC2PSC_Pos)               /*!< 0x00000800 */
-
-#define TIM_CCMR1_IC2F_Pos        (12U)       
-#define TIM_CCMR1_IC2F_Msk        (0xFUL << TIM_CCMR1_IC2F_Pos)                 /*!< 0x0000F000 */
-#define TIM_CCMR1_IC2F            TIM_CCMR1_IC2F_Msk                           /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
-#define TIM_CCMR1_IC2F_0          (0x1UL << TIM_CCMR1_IC2F_Pos)                 /*!< 0x00001000 */
-#define TIM_CCMR1_IC2F_1          (0x2UL << TIM_CCMR1_IC2F_Pos)                 /*!< 0x00002000 */
-#define TIM_CCMR1_IC2F_2          (0x4UL << TIM_CCMR1_IC2F_Pos)                 /*!< 0x00004000 */
-#define TIM_CCMR1_IC2F_3          (0x8UL << TIM_CCMR1_IC2F_Pos)                 /*!< 0x00008000 */
-
-/******************  Bit definition for TIM_CCMR2 register  *******************/
-#define TIM_CCMR2_CC3S_Pos        (0U)        
-#define TIM_CCMR2_CC3S_Msk        (0x3UL << TIM_CCMR2_CC3S_Pos)                 /*!< 0x00000003 */
-#define TIM_CCMR2_CC3S            TIM_CCMR2_CC3S_Msk                           /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
-#define TIM_CCMR2_CC3S_0          (0x1UL << TIM_CCMR2_CC3S_Pos)                 /*!< 0x00000001 */
-#define TIM_CCMR2_CC3S_1          (0x2UL << TIM_CCMR2_CC3S_Pos)                 /*!< 0x00000002 */
-
-#define TIM_CCMR2_OC3FE_Pos       (2U)        
-#define TIM_CCMR2_OC3FE_Msk       (0x1UL << TIM_CCMR2_OC3FE_Pos)                /*!< 0x00000004 */
-#define TIM_CCMR2_OC3FE           TIM_CCMR2_OC3FE_Msk                          /*!<Output Compare 3 Fast enable */
-#define TIM_CCMR2_OC3PE_Pos       (3U)        
-#define TIM_CCMR2_OC3PE_Msk       (0x1UL << TIM_CCMR2_OC3PE_Pos)                /*!< 0x00000008 */
-#define TIM_CCMR2_OC3PE           TIM_CCMR2_OC3PE_Msk                          /*!<Output Compare 3 Preload enable */
-
-#define TIM_CCMR2_OC3M_Pos        (4U)        
-#define TIM_CCMR2_OC3M_Msk        (0x7UL << TIM_CCMR2_OC3M_Pos)                 /*!< 0x00000070 */
-#define TIM_CCMR2_OC3M            TIM_CCMR2_OC3M_Msk                           /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
-#define TIM_CCMR2_OC3M_0          (0x1UL << TIM_CCMR2_OC3M_Pos)                 /*!< 0x00000010 */
-#define TIM_CCMR2_OC3M_1          (0x2UL << TIM_CCMR2_OC3M_Pos)                 /*!< 0x00000020 */
-#define TIM_CCMR2_OC3M_2          (0x4UL << TIM_CCMR2_OC3M_Pos)                 /*!< 0x00000040 */
-
-#define TIM_CCMR2_OC3CE_Pos       (7U)        
-#define TIM_CCMR2_OC3CE_Msk       (0x1UL << TIM_CCMR2_OC3CE_Pos)                /*!< 0x00000080 */
-#define TIM_CCMR2_OC3CE           TIM_CCMR2_OC3CE_Msk                          /*!<Output Compare 3 Clear Enable */
-
-#define TIM_CCMR2_CC4S_Pos        (8U)        
-#define TIM_CCMR2_CC4S_Msk        (0x3UL << TIM_CCMR2_CC4S_Pos)                 /*!< 0x00000300 */
-#define TIM_CCMR2_CC4S            TIM_CCMR2_CC4S_Msk                           /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
-#define TIM_CCMR2_CC4S_0          (0x1UL << TIM_CCMR2_CC4S_Pos)                 /*!< 0x00000100 */
-#define TIM_CCMR2_CC4S_1          (0x2UL << TIM_CCMR2_CC4S_Pos)                 /*!< 0x00000200 */
-
-#define TIM_CCMR2_OC4FE_Pos       (10U)       
-#define TIM_CCMR2_OC4FE_Msk       (0x1UL << TIM_CCMR2_OC4FE_Pos)                /*!< 0x00000400 */
-#define TIM_CCMR2_OC4FE           TIM_CCMR2_OC4FE_Msk                          /*!<Output Compare 4 Fast enable */
-#define TIM_CCMR2_OC4PE_Pos       (11U)       
-#define TIM_CCMR2_OC4PE_Msk       (0x1UL << TIM_CCMR2_OC4PE_Pos)                /*!< 0x00000800 */
-#define TIM_CCMR2_OC4PE           TIM_CCMR2_OC4PE_Msk                          /*!<Output Compare 4 Preload enable */
-
-#define TIM_CCMR2_OC4M_Pos        (12U)       
-#define TIM_CCMR2_OC4M_Msk        (0x7UL << TIM_CCMR2_OC4M_Pos)                 /*!< 0x00007000 */
-#define TIM_CCMR2_OC4M            TIM_CCMR2_OC4M_Msk                           /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
-#define TIM_CCMR2_OC4M_0          (0x1UL << TIM_CCMR2_OC4M_Pos)                 /*!< 0x00001000 */
-#define TIM_CCMR2_OC4M_1          (0x2UL << TIM_CCMR2_OC4M_Pos)                 /*!< 0x00002000 */
-#define TIM_CCMR2_OC4M_2          (0x4UL << TIM_CCMR2_OC4M_Pos)                 /*!< 0x00004000 */
-
-#define TIM_CCMR2_OC4CE_Pos       (15U)       
-#define TIM_CCMR2_OC4CE_Msk       (0x1UL << TIM_CCMR2_OC4CE_Pos)                /*!< 0x00008000 */
-#define TIM_CCMR2_OC4CE           TIM_CCMR2_OC4CE_Msk                          /*!<Output Compare 4 Clear Enable */
-
-/*----------------------------------------------------------------------------*/
-
-#define TIM_CCMR2_IC3PSC_Pos      (2U)        
-#define TIM_CCMR2_IC3PSC_Msk      (0x3UL << TIM_CCMR2_IC3PSC_Pos)               /*!< 0x0000000C */
-#define TIM_CCMR2_IC3PSC          TIM_CCMR2_IC3PSC_Msk                         /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
-#define TIM_CCMR2_IC3PSC_0        (0x1UL << TIM_CCMR2_IC3PSC_Pos)               /*!< 0x00000004 */
-#define TIM_CCMR2_IC3PSC_1        (0x2UL << TIM_CCMR2_IC3PSC_Pos)               /*!< 0x00000008 */
-
-#define TIM_CCMR2_IC3F_Pos        (4U)        
-#define TIM_CCMR2_IC3F_Msk        (0xFUL << TIM_CCMR2_IC3F_Pos)                 /*!< 0x000000F0 */
-#define TIM_CCMR2_IC3F            TIM_CCMR2_IC3F_Msk                           /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
-#define TIM_CCMR2_IC3F_0          (0x1UL << TIM_CCMR2_IC3F_Pos)                 /*!< 0x00000010 */
-#define TIM_CCMR2_IC3F_1          (0x2UL << TIM_CCMR2_IC3F_Pos)                 /*!< 0x00000020 */
-#define TIM_CCMR2_IC3F_2          (0x4UL << TIM_CCMR2_IC3F_Pos)                 /*!< 0x00000040 */
-#define TIM_CCMR2_IC3F_3          (0x8UL << TIM_CCMR2_IC3F_Pos)                 /*!< 0x00000080 */
-
-#define TIM_CCMR2_IC4PSC_Pos      (10U)       
-#define TIM_CCMR2_IC4PSC_Msk      (0x3UL << TIM_CCMR2_IC4PSC_Pos)               /*!< 0x00000C00 */
-#define TIM_CCMR2_IC4PSC          TIM_CCMR2_IC4PSC_Msk                         /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
-#define TIM_CCMR2_IC4PSC_0        (0x1UL << TIM_CCMR2_IC4PSC_Pos)               /*!< 0x00000400 */
-#define TIM_CCMR2_IC4PSC_1        (0x2UL << TIM_CCMR2_IC4PSC_Pos)               /*!< 0x00000800 */
-
-#define TIM_CCMR2_IC4F_Pos        (12U)       
-#define TIM_CCMR2_IC4F_Msk        (0xFUL << TIM_CCMR2_IC4F_Pos)                 /*!< 0x0000F000 */
-#define TIM_CCMR2_IC4F            TIM_CCMR2_IC4F_Msk                           /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
-#define TIM_CCMR2_IC4F_0          (0x1UL << TIM_CCMR2_IC4F_Pos)                 /*!< 0x00001000 */
-#define TIM_CCMR2_IC4F_1          (0x2UL << TIM_CCMR2_IC4F_Pos)                 /*!< 0x00002000 */
-#define TIM_CCMR2_IC4F_2          (0x4UL << TIM_CCMR2_IC4F_Pos)                 /*!< 0x00004000 */
-#define TIM_CCMR2_IC4F_3          (0x8UL << TIM_CCMR2_IC4F_Pos)                 /*!< 0x00008000 */
-
-/*******************  Bit definition for TIM_CCER register  *******************/
-#define TIM_CCER_CC1E_Pos         (0U)        
-#define TIM_CCER_CC1E_Msk         (0x1UL << TIM_CCER_CC1E_Pos)                  /*!< 0x00000001 */
-#define TIM_CCER_CC1E             TIM_CCER_CC1E_Msk                            /*!<Capture/Compare 1 output enable */
-#define TIM_CCER_CC1P_Pos         (1U)        
-#define TIM_CCER_CC1P_Msk         (0x1UL << TIM_CCER_CC1P_Pos)                  /*!< 0x00000002 */
-#define TIM_CCER_CC1P             TIM_CCER_CC1P_Msk                            /*!<Capture/Compare 1 output Polarity */
-#define TIM_CCER_CC1NP_Pos        (3U)        
-#define TIM_CCER_CC1NP_Msk        (0x1UL << TIM_CCER_CC1NP_Pos)                 /*!< 0x00000008 */
-#define TIM_CCER_CC1NP            TIM_CCER_CC1NP_Msk                           /*!<Capture/Compare 1 Complementary output Polarity */
-#define TIM_CCER_CC2E_Pos         (4U)        
-#define TIM_CCER_CC2E_Msk         (0x1UL << TIM_CCER_CC2E_Pos)                  /*!< 0x00000010 */
-#define TIM_CCER_CC2E             TIM_CCER_CC2E_Msk                            /*!<Capture/Compare 2 output enable */
-#define TIM_CCER_CC2P_Pos         (5U)        
-#define TIM_CCER_CC2P_Msk         (0x1UL << TIM_CCER_CC2P_Pos)                  /*!< 0x00000020 */
-#define TIM_CCER_CC2P             TIM_CCER_CC2P_Msk                            /*!<Capture/Compare 2 output Polarity */
-#define TIM_CCER_CC2NP_Pos        (7U)        
-#define TIM_CCER_CC2NP_Msk        (0x1UL << TIM_CCER_CC2NP_Pos)                 /*!< 0x00000080 */
-#define TIM_CCER_CC2NP            TIM_CCER_CC2NP_Msk                           /*!<Capture/Compare 2 Complementary output Polarity */
-#define TIM_CCER_CC3E_Pos         (8U)        
-#define TIM_CCER_CC3E_Msk         (0x1UL << TIM_CCER_CC3E_Pos)                  /*!< 0x00000100 */
-#define TIM_CCER_CC3E             TIM_CCER_CC3E_Msk                            /*!<Capture/Compare 3 output enable */
-#define TIM_CCER_CC3P_Pos         (9U)        
-#define TIM_CCER_CC3P_Msk         (0x1UL << TIM_CCER_CC3P_Pos)                  /*!< 0x00000200 */
-#define TIM_CCER_CC3P             TIM_CCER_CC3P_Msk                            /*!<Capture/Compare 3 output Polarity */
-#define TIM_CCER_CC3NP_Pos        (11U)       
-#define TIM_CCER_CC3NP_Msk        (0x1UL << TIM_CCER_CC3NP_Pos)                 /*!< 0x00000800 */
-#define TIM_CCER_CC3NP            TIM_CCER_CC3NP_Msk                           /*!<Capture/Compare 3 Complementary output Polarity */
-#define TIM_CCER_CC4E_Pos         (12U)       
-#define TIM_CCER_CC4E_Msk         (0x1UL << TIM_CCER_CC4E_Pos)                  /*!< 0x00001000 */
-#define TIM_CCER_CC4E             TIM_CCER_CC4E_Msk                            /*!<Capture/Compare 4 output enable */
-#define TIM_CCER_CC4P_Pos         (13U)       
-#define TIM_CCER_CC4P_Msk         (0x1UL << TIM_CCER_CC4P_Pos)                  /*!< 0x00002000 */
-#define TIM_CCER_CC4P             TIM_CCER_CC4P_Msk                            /*!<Capture/Compare 4 output Polarity */
-#define TIM_CCER_CC4NP_Pos        (15U)       
-#define TIM_CCER_CC4NP_Msk        (0x1UL << TIM_CCER_CC4NP_Pos)                 /*!< 0x00008000 */
-#define TIM_CCER_CC4NP            TIM_CCER_CC4NP_Msk                           /*!<Capture/Compare 4 Complementary output Polarity */
-
-/*******************  Bit definition for TIM_CNT register  ********************/
-#define TIM_CNT_CNT_Pos           (0U)        
-#define TIM_CNT_CNT_Msk           (0xFFFFUL << TIM_CNT_CNT_Pos)                 /*!< 0x0000FFFF */
-#define TIM_CNT_CNT               TIM_CNT_CNT_Msk                              /*!<Counter Value */
-
-/*******************  Bit definition for TIM_PSC register  ********************/
-#define TIM_PSC_PSC_Pos           (0U)        
-#define TIM_PSC_PSC_Msk           (0xFFFFUL << TIM_PSC_PSC_Pos)                 /*!< 0x0000FFFF */
-#define TIM_PSC_PSC               TIM_PSC_PSC_Msk                              /*!<Prescaler Value */
-
-/*******************  Bit definition for TIM_ARR register  ********************/
-#define TIM_ARR_ARR_Pos           (0U)        
-#define TIM_ARR_ARR_Msk           (0xFFFFUL << TIM_ARR_ARR_Pos)                 /*!< 0x0000FFFF */
-#define TIM_ARR_ARR               TIM_ARR_ARR_Msk                              /*!<actual auto-reload Value */
-
-/*******************  Bit definition for TIM_CCR1 register  *******************/
-#define TIM_CCR1_CCR1_Pos         (0U)        
-#define TIM_CCR1_CCR1_Msk         (0xFFFFUL << TIM_CCR1_CCR1_Pos)               /*!< 0x0000FFFF */
-#define TIM_CCR1_CCR1             TIM_CCR1_CCR1_Msk                            /*!<Capture/Compare 1 Value */
-
-/*******************  Bit definition for TIM_CCR2 register  *******************/
-#define TIM_CCR2_CCR2_Pos         (0U)        
-#define TIM_CCR2_CCR2_Msk         (0xFFFFUL << TIM_CCR2_CCR2_Pos)               /*!< 0x0000FFFF */
-#define TIM_CCR2_CCR2             TIM_CCR2_CCR2_Msk                            /*!<Capture/Compare 2 Value */
-
-/*******************  Bit definition for TIM_CCR3 register  *******************/
-#define TIM_CCR3_CCR3_Pos         (0U)        
-#define TIM_CCR3_CCR3_Msk         (0xFFFFUL << TIM_CCR3_CCR3_Pos)               /*!< 0x0000FFFF */
-#define TIM_CCR3_CCR3             TIM_CCR3_CCR3_Msk                            /*!<Capture/Compare 3 Value */
-
-/*******************  Bit definition for TIM_CCR4 register  *******************/
-#define TIM_CCR4_CCR4_Pos         (0U)        
-#define TIM_CCR4_CCR4_Msk         (0xFFFFUL << TIM_CCR4_CCR4_Pos)               /*!< 0x0000FFFF */
-#define TIM_CCR4_CCR4             TIM_CCR4_CCR4_Msk                            /*!<Capture/Compare 4 Value */
-
-/*******************  Bit definition for TIM_DCR register  ********************/
-#define TIM_DCR_DBA_Pos           (0U)        
-#define TIM_DCR_DBA_Msk           (0x1FUL << TIM_DCR_DBA_Pos)                   /*!< 0x0000001F */
-#define TIM_DCR_DBA               TIM_DCR_DBA_Msk                              /*!<DBA[4:0] bits (DMA Base Address) */
-#define TIM_DCR_DBA_0             (0x01UL << TIM_DCR_DBA_Pos)                   /*!< 0x00000001 */
-#define TIM_DCR_DBA_1             (0x02UL << TIM_DCR_DBA_Pos)                   /*!< 0x00000002 */
-#define TIM_DCR_DBA_2             (0x04UL << TIM_DCR_DBA_Pos)                   /*!< 0x00000004 */
-#define TIM_DCR_DBA_3             (0x08UL << TIM_DCR_DBA_Pos)                   /*!< 0x00000008 */
-#define TIM_DCR_DBA_4             (0x10UL << TIM_DCR_DBA_Pos)                   /*!< 0x00000010 */
-
-#define TIM_DCR_DBL_Pos           (8U)        
-#define TIM_DCR_DBL_Msk           (0x1FUL << TIM_DCR_DBL_Pos)                   /*!< 0x00001F00 */
-#define TIM_DCR_DBL               TIM_DCR_DBL_Msk                              /*!<DBL[4:0] bits (DMA Burst Length) */
-#define TIM_DCR_DBL_0             (0x01UL << TIM_DCR_DBL_Pos)                   /*!< 0x00000100 */
-#define TIM_DCR_DBL_1             (0x02UL << TIM_DCR_DBL_Pos)                   /*!< 0x00000200 */
-#define TIM_DCR_DBL_2             (0x04UL << TIM_DCR_DBL_Pos)                   /*!< 0x00000400 */
-#define TIM_DCR_DBL_3             (0x08UL << TIM_DCR_DBL_Pos)                   /*!< 0x00000800 */
-#define TIM_DCR_DBL_4             (0x10UL << TIM_DCR_DBL_Pos)                   /*!< 0x00001000 */
-
-/*******************  Bit definition for TIM_DMAR register  *******************/
-#define TIM_DMAR_DMAB_Pos         (0U)        
-#define TIM_DMAR_DMAB_Msk         (0xFFFFUL << TIM_DMAR_DMAB_Pos)               /*!< 0x0000FFFF */
-#define TIM_DMAR_DMAB             TIM_DMAR_DMAB_Msk                            /*!<DMA register for burst accesses */
-
-/*******************  Bit definition for TIM_OR register  *********************/
-#define TIM2_OR_ETR_RMP_Pos      (0U)         
-#define TIM2_OR_ETR_RMP_Msk      (0x7UL << TIM2_OR_ETR_RMP_Pos)                 /*!< 0x00000007 */
-#define TIM2_OR_ETR_RMP          TIM2_OR_ETR_RMP_Msk                           /*!<ETR_RMP[1:0] bits (TIM2 ETR remap) */
-#define TIM2_OR_ETR_RMP_0        (0x1UL << TIM2_OR_ETR_RMP_Pos)                 /*!< 0x00000001 */
-#define TIM2_OR_ETR_RMP_1        (0x2UL << TIM2_OR_ETR_RMP_Pos)                 /*!< 0x00000002 */
-#define TIM2_OR_ETR_RMP_2        (0x4UL << TIM2_OR_ETR_RMP_Pos)                 /*!< 0x00000004 */
-#define TIM2_OR_TI4_RMP_Pos      (3U)         
-#define TIM2_OR_TI4_RMP_Msk      (0x3UL << TIM2_OR_TI4_RMP_Pos)                 /*!< 0x00000018 */
-#define TIM2_OR_TI4_RMP          TIM2_OR_TI4_RMP_Msk                           /*!<TI4_RMP[1:0] bits (TIM2 Input 4 remap) */
-#define TIM2_OR_TI4_RMP_0        (0x1UL << TIM2_OR_TI4_RMP_Pos)                 /*!< 0x00000008 */
-#define TIM2_OR_TI4_RMP_1        (0x2UL << TIM2_OR_TI4_RMP_Pos)                 /*!< 0x00000010 */
-
-#define TIM21_OR_ETR_RMP_Pos      (0U)        
-#define TIM21_OR_ETR_RMP_Msk      (0x3UL << TIM21_OR_ETR_RMP_Pos)               /*!< 0x00000003 */
-#define TIM21_OR_ETR_RMP          TIM21_OR_ETR_RMP_Msk                         /*!<ETR_RMP[1:0] bits (TIM21 ETR remap) */
-#define TIM21_OR_ETR_RMP_0        (0x1UL << TIM21_OR_ETR_RMP_Pos)               /*!< 0x00000001 */
-#define TIM21_OR_ETR_RMP_1        (0x2UL << TIM21_OR_ETR_RMP_Pos)               /*!< 0x00000002 */
-#define TIM21_OR_TI1_RMP_Pos      (2U)        
-#define TIM21_OR_TI1_RMP_Msk      (0x7UL << TIM21_OR_TI1_RMP_Pos)               /*!< 0x0000001C */
-#define TIM21_OR_TI1_RMP          TIM21_OR_TI1_RMP_Msk                         /*!<TI1_RMP[2:0] bits (TIM21 Input 1 remap) */
-#define TIM21_OR_TI1_RMP_0        (0x1UL << TIM21_OR_TI1_RMP_Pos)               /*!< 0x00000004 */
-#define TIM21_OR_TI1_RMP_1        (0x2UL << TIM21_OR_TI1_RMP_Pos)               /*!< 0x00000008 */
-#define TIM21_OR_TI1_RMP_2        (0x4UL << TIM21_OR_TI1_RMP_Pos)               /*!< 0x00000010 */
-#define TIM21_OR_TI2_RMP_Pos      (5U)        
-#define TIM21_OR_TI2_RMP_Msk      (0x1UL << TIM21_OR_TI2_RMP_Pos)               /*!< 0x00000020 */
-#define TIM21_OR_TI2_RMP          TIM21_OR_TI2_RMP_Msk                         /*!<TI2_RMP bit (TIM21 Input 2 remap) */
-
-#define TIM22_OR_ETR_RMP_Pos      (0U)        
-#define TIM22_OR_ETR_RMP_Msk      (0x3UL << TIM22_OR_ETR_RMP_Pos)               /*!< 0x00000003 */
-#define TIM22_OR_ETR_RMP          TIM22_OR_ETR_RMP_Msk                         /*!<ETR_RMP[1:0] bits (TIM22 ETR remap) */
-#define TIM22_OR_ETR_RMP_0        (0x1UL << TIM22_OR_ETR_RMP_Pos)               /*!< 0x00000001 */
-#define TIM22_OR_ETR_RMP_1        (0x2UL << TIM22_OR_ETR_RMP_Pos)               /*!< 0x00000002 */
-#define TIM22_OR_TI1_RMP_Pos      (2U)        
-#define TIM22_OR_TI1_RMP_Msk      (0x3UL << TIM22_OR_TI1_RMP_Pos)               /*!< 0x0000000C */
-#define TIM22_OR_TI1_RMP          TIM22_OR_TI1_RMP_Msk                         /*!<TI1_RMP[2:0] bits (TIM22 Input 1 remap) */
-#define TIM22_OR_TI1_RMP_0        (0x1UL << TIM22_OR_TI1_RMP_Pos)               /*!< 0x00000004 */
-#define TIM22_OR_TI1_RMP_1        (0x2UL << TIM22_OR_TI1_RMP_Pos)               /*!< 0x00000008 */
-
-
-/******************************************************************************/
-/*                                                                            */
-/*      Universal Synchronous Asynchronous Receiver Transmitter (USART)       */
-/*                                                                            */
-/******************************************************************************/
-
-/*
- * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
- */
-/* Note: No specific macro feature on this device */
-
-/******************  Bit definition for USART_CR1 register  *******************/
-#define USART_CR1_UE_Pos              (0U)    
-#define USART_CR1_UE_Msk              (0x1UL << USART_CR1_UE_Pos)               /*!< 0x00000001 */
-#define USART_CR1_UE                  USART_CR1_UE_Msk                         /*!< USART Enable */
-#define USART_CR1_UESM_Pos            (1U)    
-#define USART_CR1_UESM_Msk            (0x1UL << USART_CR1_UESM_Pos)             /*!< 0x00000002 */
-#define USART_CR1_UESM                USART_CR1_UESM_Msk                       /*!< USART Enable in STOP Mode */
-#define USART_CR1_RE_Pos              (2U)    
-#define USART_CR1_RE_Msk              (0x1UL << USART_CR1_RE_Pos)               /*!< 0x00000004 */
-#define USART_CR1_RE                  USART_CR1_RE_Msk                         /*!< Receiver Enable */
-#define USART_CR1_TE_Pos              (3U)    
-#define USART_CR1_TE_Msk              (0x1UL << USART_CR1_TE_Pos)               /*!< 0x00000008 */
-#define USART_CR1_TE                  USART_CR1_TE_Msk                         /*!< Transmitter Enable */
-#define USART_CR1_IDLEIE_Pos          (4U)    
-#define USART_CR1_IDLEIE_Msk          (0x1UL << USART_CR1_IDLEIE_Pos)           /*!< 0x00000010 */
-#define USART_CR1_IDLEIE              USART_CR1_IDLEIE_Msk                     /*!< IDLE Interrupt Enable */
-#define USART_CR1_RXNEIE_Pos          (5U)    
-#define USART_CR1_RXNEIE_Msk          (0x1UL << USART_CR1_RXNEIE_Pos)           /*!< 0x00000020 */
-#define USART_CR1_RXNEIE              USART_CR1_RXNEIE_Msk                     /*!< RXNE Interrupt Enable */
-#define USART_CR1_TCIE_Pos            (6U)    
-#define USART_CR1_TCIE_Msk            (0x1UL << USART_CR1_TCIE_Pos)             /*!< 0x00000040 */
-#define USART_CR1_TCIE                USART_CR1_TCIE_Msk                       /*!< Transmission Complete Interrupt Enable */
-#define USART_CR1_TXEIE_Pos           (7U)    
-#define USART_CR1_TXEIE_Msk           (0x1UL << USART_CR1_TXEIE_Pos)            /*!< 0x00000080 */
-#define USART_CR1_TXEIE               USART_CR1_TXEIE_Msk                      /*!< TXE Interrupt Enable */
-#define USART_CR1_PEIE_Pos            (8U)    
-#define USART_CR1_PEIE_Msk            (0x1UL << USART_CR1_PEIE_Pos)             /*!< 0x00000100 */
-#define USART_CR1_PEIE                USART_CR1_PEIE_Msk                       /*!< PE Interrupt Enable */
-#define USART_CR1_PS_Pos              (9U)    
-#define USART_CR1_PS_Msk              (0x1UL << USART_CR1_PS_Pos)               /*!< 0x00000200 */
-#define USART_CR1_PS                  USART_CR1_PS_Msk                         /*!< Parity Selection */
-#define USART_CR1_PCE_Pos             (10U)   
-#define USART_CR1_PCE_Msk             (0x1UL << USART_CR1_PCE_Pos)              /*!< 0x00000400 */
-#define USART_CR1_PCE                 USART_CR1_PCE_Msk                        /*!< Parity Control Enable */
-#define USART_CR1_WAKE_Pos            (11U)   
-#define USART_CR1_WAKE_Msk            (0x1UL << USART_CR1_WAKE_Pos)             /*!< 0x00000800 */
-#define USART_CR1_WAKE                USART_CR1_WAKE_Msk                       /*!< Receiver Wakeup method */
-#define USART_CR1_M_Pos               (12U)   
-#define USART_CR1_M_Msk               (0x10001UL << USART_CR1_M_Pos)            /*!< 0x10001000 */
-#define USART_CR1_M                   USART_CR1_M_Msk                          /*!< Word length */
-#define USART_CR1_M0_Pos              (12U)   
-#define USART_CR1_M0_Msk              (0x1UL << USART_CR1_M0_Pos)               /*!< 0x00001000 */
-#define USART_CR1_M0                  USART_CR1_M0_Msk                         /*!< Word length - Bit 0 */
-#define USART_CR1_MME_Pos             (13U)   
-#define USART_CR1_MME_Msk             (0x1UL << USART_CR1_MME_Pos)              /*!< 0x00002000 */
-#define USART_CR1_MME                 USART_CR1_MME_Msk                        /*!< Mute Mode Enable */
-#define USART_CR1_CMIE_Pos            (14U)   
-#define USART_CR1_CMIE_Msk            (0x1UL << USART_CR1_CMIE_Pos)             /*!< 0x00004000 */
-#define USART_CR1_CMIE                USART_CR1_CMIE_Msk                       /*!< Character match interrupt enable */
-#define USART_CR1_OVER8_Pos           (15U)   
-#define USART_CR1_OVER8_Msk           (0x1UL << USART_CR1_OVER8_Pos)            /*!< 0x00008000 */
-#define USART_CR1_OVER8               USART_CR1_OVER8_Msk                      /*!< Oversampling by 8-bit or 16-bit mode */
-#define USART_CR1_DEDT_Pos            (16U)   
-#define USART_CR1_DEDT_Msk            (0x1FUL << USART_CR1_DEDT_Pos)            /*!< 0x001F0000 */
-#define USART_CR1_DEDT                USART_CR1_DEDT_Msk                       /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
-#define USART_CR1_DEDT_0              (0x01UL << USART_CR1_DEDT_Pos)            /*!< 0x00010000 */
-#define USART_CR1_DEDT_1              (0x02UL << USART_CR1_DEDT_Pos)            /*!< 0x00020000 */
-#define USART_CR1_DEDT_2              (0x04UL << USART_CR1_DEDT_Pos)            /*!< 0x00040000 */
-#define USART_CR1_DEDT_3              (0x08UL << USART_CR1_DEDT_Pos)            /*!< 0x00080000 */
-#define USART_CR1_DEDT_4              (0x10UL << USART_CR1_DEDT_Pos)            /*!< 0x00100000 */
-#define USART_CR1_DEAT_Pos            (21U)   
-#define USART_CR1_DEAT_Msk            (0x1FUL << USART_CR1_DEAT_Pos)            /*!< 0x03E00000 */
-#define USART_CR1_DEAT                USART_CR1_DEAT_Msk                       /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
-#define USART_CR1_DEAT_0              (0x01UL << USART_CR1_DEAT_Pos)            /*!< 0x00200000 */
-#define USART_CR1_DEAT_1              (0x02UL << USART_CR1_DEAT_Pos)            /*!< 0x00400000 */
-#define USART_CR1_DEAT_2              (0x04UL << USART_CR1_DEAT_Pos)            /*!< 0x00800000 */
-#define USART_CR1_DEAT_3              (0x08UL << USART_CR1_DEAT_Pos)            /*!< 0x01000000 */
-#define USART_CR1_DEAT_4              (0x10UL << USART_CR1_DEAT_Pos)            /*!< 0x02000000 */
-#define USART_CR1_RTOIE_Pos           (26U)   
-#define USART_CR1_RTOIE_Msk           (0x1UL << USART_CR1_RTOIE_Pos)            /*!< 0x04000000 */
-#define USART_CR1_RTOIE               USART_CR1_RTOIE_Msk                      /*!< Receive Time Out interrupt enable */
-#define USART_CR1_EOBIE_Pos           (27U)   
-#define USART_CR1_EOBIE_Msk           (0x1UL << USART_CR1_EOBIE_Pos)            /*!< 0x08000000 */
-#define USART_CR1_EOBIE               USART_CR1_EOBIE_Msk                      /*!< End of Block interrupt enable */
-#define USART_CR1_M1_Pos              (28U)   
-#define USART_CR1_M1_Msk              (0x1UL << USART_CR1_M1_Pos)               /*!< 0x10000000 */
-#define USART_CR1_M1                  USART_CR1_M1_Msk                         /*!< Word length - Bit 1 */
-/******************  Bit definition for USART_CR2 register  *******************/
-#define USART_CR2_ADDM7_Pos           (4U)    
-#define USART_CR2_ADDM7_Msk           (0x1UL << USART_CR2_ADDM7_Pos)            /*!< 0x00000010 */
-#define USART_CR2_ADDM7               USART_CR2_ADDM7_Msk                      /*!< 7-bit or 4-bit Address Detection */
-#define USART_CR2_LBDL_Pos            (5U)    
-#define USART_CR2_LBDL_Msk            (0x1UL << USART_CR2_LBDL_Pos)             /*!< 0x00000020 */
-#define USART_CR2_LBDL                USART_CR2_LBDL_Msk                       /*!< LIN Break Detection Length */
-#define USART_CR2_LBDIE_Pos           (6U)    
-#define USART_CR2_LBDIE_Msk           (0x1UL << USART_CR2_LBDIE_Pos)            /*!< 0x00000040 */
-#define USART_CR2_LBDIE               USART_CR2_LBDIE_Msk                      /*!< LIN Break Detection Interrupt Enable */
-#define USART_CR2_LBCL_Pos            (8U)    
-#define USART_CR2_LBCL_Msk            (0x1UL << USART_CR2_LBCL_Pos)             /*!< 0x00000100 */
-#define USART_CR2_LBCL                USART_CR2_LBCL_Msk                       /*!< Last Bit Clock pulse */
-#define USART_CR2_CPHA_Pos            (9U)    
-#define USART_CR2_CPHA_Msk            (0x1UL << USART_CR2_CPHA_Pos)             /*!< 0x00000200 */
-#define USART_CR2_CPHA                USART_CR2_CPHA_Msk                       /*!< Clock Phase */
-#define USART_CR2_CPOL_Pos            (10U)   
-#define USART_CR2_CPOL_Msk            (0x1UL << USART_CR2_CPOL_Pos)             /*!< 0x00000400 */
-#define USART_CR2_CPOL                USART_CR2_CPOL_Msk                       /*!< Clock Polarity */
-#define USART_CR2_CLKEN_Pos           (11U)   
-#define USART_CR2_CLKEN_Msk           (0x1UL << USART_CR2_CLKEN_Pos)            /*!< 0x00000800 */
-#define USART_CR2_CLKEN               USART_CR2_CLKEN_Msk                      /*!< Clock Enable */
-#define USART_CR2_STOP_Pos            (12U)   
-#define USART_CR2_STOP_Msk            (0x3UL << USART_CR2_STOP_Pos)             /*!< 0x00003000 */
-#define USART_CR2_STOP                USART_CR2_STOP_Msk                       /*!< STOP[1:0] bits (STOP bits) */
-#define USART_CR2_STOP_0              (0x1UL << USART_CR2_STOP_Pos)             /*!< 0x00001000 */
-#define USART_CR2_STOP_1              (0x2UL << USART_CR2_STOP_Pos)             /*!< 0x00002000 */
-#define USART_CR2_LINEN_Pos           (14U)   
-#define USART_CR2_LINEN_Msk           (0x1UL << USART_CR2_LINEN_Pos)            /*!< 0x00004000 */
-#define USART_CR2_LINEN               USART_CR2_LINEN_Msk                      /*!< LIN mode enable */
-#define USART_CR2_SWAP_Pos            (15U)   
-#define USART_CR2_SWAP_Msk            (0x1UL << USART_CR2_SWAP_Pos)             /*!< 0x00008000 */
-#define USART_CR2_SWAP                USART_CR2_SWAP_Msk                       /*!< SWAP TX/RX pins */
-#define USART_CR2_RXINV_Pos           (16U)   
-#define USART_CR2_RXINV_Msk           (0x1UL << USART_CR2_RXINV_Pos)            /*!< 0x00010000 */
-#define USART_CR2_RXINV               USART_CR2_RXINV_Msk                      /*!< RX pin active level inversion */
-#define USART_CR2_TXINV_Pos           (17U)   
-#define USART_CR2_TXINV_Msk           (0x1UL << USART_CR2_TXINV_Pos)            /*!< 0x00020000 */
-#define USART_CR2_TXINV               USART_CR2_TXINV_Msk                      /*!< TX pin active level inversion */
-#define USART_CR2_DATAINV_Pos         (18U)   
-#define USART_CR2_DATAINV_Msk         (0x1UL << USART_CR2_DATAINV_Pos)          /*!< 0x00040000 */
-#define USART_CR2_DATAINV             USART_CR2_DATAINV_Msk                    /*!< Binary data inversion */
-#define USART_CR2_MSBFIRST_Pos        (19U)   
-#define USART_CR2_MSBFIRST_Msk        (0x1UL << USART_CR2_MSBFIRST_Pos)         /*!< 0x00080000 */
-#define USART_CR2_MSBFIRST            USART_CR2_MSBFIRST_Msk                   /*!< Most Significant Bit First */
-#define USART_CR2_ABREN_Pos           (20U)   
-#define USART_CR2_ABREN_Msk           (0x1UL << USART_CR2_ABREN_Pos)            /*!< 0x00100000 */
-#define USART_CR2_ABREN               USART_CR2_ABREN_Msk                      /*!< Auto Baud-Rate Enable*/
-#define USART_CR2_ABRMODE_Pos         (21U)   
-#define USART_CR2_ABRMODE_Msk         (0x3UL << USART_CR2_ABRMODE_Pos)          /*!< 0x00600000 */
-#define USART_CR2_ABRMODE             USART_CR2_ABRMODE_Msk                    /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
-#define USART_CR2_ABRMODE_0           (0x1UL << USART_CR2_ABRMODE_Pos)          /*!< 0x00200000 */
-#define USART_CR2_ABRMODE_1           (0x2UL << USART_CR2_ABRMODE_Pos)          /*!< 0x00400000 */
-#define USART_CR2_RTOEN_Pos           (23U)   
-#define USART_CR2_RTOEN_Msk           (0x1UL << USART_CR2_RTOEN_Pos)            /*!< 0x00800000 */
-#define USART_CR2_RTOEN               USART_CR2_RTOEN_Msk                      /*!< Receiver Time-Out enable */
-#define USART_CR2_ADD_Pos             (24U)   
-#define USART_CR2_ADD_Msk             (0xFFUL << USART_CR2_ADD_Pos)             /*!< 0xFF000000 */
-#define USART_CR2_ADD                 USART_CR2_ADD_Msk                        /*!< Address of the USART node */
-
-/******************  Bit definition for USART_CR3 register  *******************/
-#define USART_CR3_EIE_Pos             (0U)    
-#define USART_CR3_EIE_Msk             (0x1UL << USART_CR3_EIE_Pos)              /*!< 0x00000001 */
-#define USART_CR3_EIE                 USART_CR3_EIE_Msk                        /*!< Error Interrupt Enable */
-#define USART_CR3_IREN_Pos            (1U)    
-#define USART_CR3_IREN_Msk            (0x1UL << USART_CR3_IREN_Pos)             /*!< 0x00000002 */
-#define USART_CR3_IREN                USART_CR3_IREN_Msk                       /*!< IrDA mode Enable */
-#define USART_CR3_IRLP_Pos            (2U)    
-#define USART_CR3_IRLP_Msk            (0x1UL << USART_CR3_IRLP_Pos)             /*!< 0x00000004 */
-#define USART_CR3_IRLP                USART_CR3_IRLP_Msk                       /*!< IrDA Low-Power */
-#define USART_CR3_HDSEL_Pos           (3U)    
-#define USART_CR3_HDSEL_Msk           (0x1UL << USART_CR3_HDSEL_Pos)            /*!< 0x00000008 */
-#define USART_CR3_HDSEL               USART_CR3_HDSEL_Msk                      /*!< Half-Duplex Selection */
-#define USART_CR3_NACK_Pos            (4U)    
-#define USART_CR3_NACK_Msk            (0x1UL << USART_CR3_NACK_Pos)             /*!< 0x00000010 */
-#define USART_CR3_NACK                USART_CR3_NACK_Msk                       /*!< SmartCard NACK enable */
-#define USART_CR3_SCEN_Pos            (5U)    
-#define USART_CR3_SCEN_Msk            (0x1UL << USART_CR3_SCEN_Pos)             /*!< 0x00000020 */
-#define USART_CR3_SCEN                USART_CR3_SCEN_Msk                       /*!< SmartCard mode enable */
-#define USART_CR3_DMAR_Pos            (6U)    
-#define USART_CR3_DMAR_Msk            (0x1UL << USART_CR3_DMAR_Pos)             /*!< 0x00000040 */
-#define USART_CR3_DMAR                USART_CR3_DMAR_Msk                       /*!< DMA Enable Receiver */
-#define USART_CR3_DMAT_Pos            (7U)    
-#define USART_CR3_DMAT_Msk            (0x1UL << USART_CR3_DMAT_Pos)             /*!< 0x00000080 */
-#define USART_CR3_DMAT                USART_CR3_DMAT_Msk                       /*!< DMA Enable Transmitter */
-#define USART_CR3_RTSE_Pos            (8U)    
-#define USART_CR3_RTSE_Msk            (0x1UL << USART_CR3_RTSE_Pos)             /*!< 0x00000100 */
-#define USART_CR3_RTSE                USART_CR3_RTSE_Msk                       /*!< RTS Enable */
-#define USART_CR3_CTSE_Pos            (9U)    
-#define USART_CR3_CTSE_Msk            (0x1UL << USART_CR3_CTSE_Pos)             /*!< 0x00000200 */
-#define USART_CR3_CTSE                USART_CR3_CTSE_Msk                       /*!< CTS Enable */
-#define USART_CR3_CTSIE_Pos           (10U)   
-#define USART_CR3_CTSIE_Msk           (0x1UL << USART_CR3_CTSIE_Pos)            /*!< 0x00000400 */
-#define USART_CR3_CTSIE               USART_CR3_CTSIE_Msk                      /*!< CTS Interrupt Enable */
-#define USART_CR3_ONEBIT_Pos          (11U)   
-#define USART_CR3_ONEBIT_Msk          (0x1UL << USART_CR3_ONEBIT_Pos)           /*!< 0x00000800 */
-#define USART_CR3_ONEBIT              USART_CR3_ONEBIT_Msk                     /*!< One sample bit method enable */
-#define USART_CR3_OVRDIS_Pos          (12U)   
-#define USART_CR3_OVRDIS_Msk          (0x1UL << USART_CR3_OVRDIS_Pos)           /*!< 0x00001000 */
-#define USART_CR3_OVRDIS              USART_CR3_OVRDIS_Msk                     /*!< Overrun Disable */
-#define USART_CR3_DDRE_Pos            (13U)   
-#define USART_CR3_DDRE_Msk            (0x1UL << USART_CR3_DDRE_Pos)             /*!< 0x00002000 */
-#define USART_CR3_DDRE                USART_CR3_DDRE_Msk                       /*!< DMA Disable on Reception Error */
-#define USART_CR3_DEM_Pos             (14U)   
-#define USART_CR3_DEM_Msk             (0x1UL << USART_CR3_DEM_Pos)              /*!< 0x00004000 */
-#define USART_CR3_DEM                 USART_CR3_DEM_Msk                        /*!< Driver Enable Mode */
-#define USART_CR3_DEP_Pos             (15U)   
-#define USART_CR3_DEP_Msk             (0x1UL << USART_CR3_DEP_Pos)              /*!< 0x00008000 */
-#define USART_CR3_DEP                 USART_CR3_DEP_Msk                        /*!< Driver Enable Polarity Selection */
-#define USART_CR3_SCARCNT_Pos         (17U)   
-#define USART_CR3_SCARCNT_Msk         (0x7UL << USART_CR3_SCARCNT_Pos)          /*!< 0x000E0000 */
-#define USART_CR3_SCARCNT             USART_CR3_SCARCNT_Msk                    /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
-#define USART_CR3_SCARCNT_0           (0x1UL << USART_CR3_SCARCNT_Pos)          /*!< 0x00020000 */
-#define USART_CR3_SCARCNT_1           (0x2UL << USART_CR3_SCARCNT_Pos)          /*!< 0x00040000 */
-#define USART_CR3_SCARCNT_2           (0x4UL << USART_CR3_SCARCNT_Pos)          /*!< 0x00080000 */
-#define USART_CR3_WUS_Pos             (20U)   
-#define USART_CR3_WUS_Msk             (0x3UL << USART_CR3_WUS_Pos)              /*!< 0x00300000 */
-#define USART_CR3_WUS                 USART_CR3_WUS_Msk                        /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
-#define USART_CR3_WUS_0               (0x1UL << USART_CR3_WUS_Pos)              /*!< 0x00100000 */
-#define USART_CR3_WUS_1               (0x2UL << USART_CR3_WUS_Pos)              /*!< 0x00200000 */
-#define USART_CR3_WUFIE_Pos           (22U)   
-#define USART_CR3_WUFIE_Msk           (0x1UL << USART_CR3_WUFIE_Pos)            /*!< 0x00400000 */
-#define USART_CR3_WUFIE               USART_CR3_WUFIE_Msk                      /*!< Wake Up Interrupt Enable */
-#define USART_CR3_UCESM_Pos           (23U)   
-#define USART_CR3_UCESM_Msk           (0x1UL << USART_CR3_UCESM_Pos)            /*!< 0x00800000 */
-#define USART_CR3_UCESM               USART_CR3_UCESM_Msk                      /*!< Clock Enable in Stop mode */ 
-
-/******************  Bit definition for USART_BRR register  *******************/
-#define USART_BRR_DIV_FRACTION_Pos    (0U)    
-#define USART_BRR_DIV_FRACTION_Msk    (0xFUL << USART_BRR_DIV_FRACTION_Pos)     /*!< 0x0000000F */
-#define USART_BRR_DIV_FRACTION        USART_BRR_DIV_FRACTION_Msk               /*!< Fraction of USARTDIV */
-#define USART_BRR_DIV_MANTISSA_Pos    (4U)    
-#define USART_BRR_DIV_MANTISSA_Msk    (0xFFFUL << USART_BRR_DIV_MANTISSA_Pos)   /*!< 0x0000FFF0 */
-#define USART_BRR_DIV_MANTISSA        USART_BRR_DIV_MANTISSA_Msk               /*!< Mantissa of USARTDIV */
-
-/******************  Bit definition for USART_GTPR register  ******************/
-#define USART_GTPR_PSC_Pos            (0U)    
-#define USART_GTPR_PSC_Msk            (0xFFUL << USART_GTPR_PSC_Pos)            /*!< 0x000000FF */
-#define USART_GTPR_PSC                USART_GTPR_PSC_Msk                       /*!< PSC[7:0] bits (Prescaler value) */
-#define USART_GTPR_GT_Pos             (8U)    
-#define USART_GTPR_GT_Msk             (0xFFUL << USART_GTPR_GT_Pos)             /*!< 0x0000FF00 */
-#define USART_GTPR_GT                 USART_GTPR_GT_Msk                        /*!< GT[7:0] bits (Guard time value) */
-
-
-/*******************  Bit definition for USART_RTOR register  *****************/
-#define USART_RTOR_RTO_Pos            (0U)    
-#define USART_RTOR_RTO_Msk            (0xFFFFFFUL << USART_RTOR_RTO_Pos)        /*!< 0x00FFFFFF */
-#define USART_RTOR_RTO                USART_RTOR_RTO_Msk                       /*!< Receiver Time Out Value */
-#define USART_RTOR_BLEN_Pos           (24U)   
-#define USART_RTOR_BLEN_Msk           (0xFFUL << USART_RTOR_BLEN_Pos)           /*!< 0xFF000000 */
-#define USART_RTOR_BLEN               USART_RTOR_BLEN_Msk                      /*!< Block Length */
-
-/*******************  Bit definition for USART_RQR register  ******************/
-#define USART_RQR_ABRRQ_Pos           (0U)    
-#define USART_RQR_ABRRQ_Msk           (0x1UL << USART_RQR_ABRRQ_Pos)            /*!< 0x00000001 */
-#define USART_RQR_ABRRQ               USART_RQR_ABRRQ_Msk                      /*!< Auto-Baud Rate Request */
-#define USART_RQR_SBKRQ_Pos           (1U)    
-#define USART_RQR_SBKRQ_Msk           (0x1UL << USART_RQR_SBKRQ_Pos)            /*!< 0x00000002 */
-#define USART_RQR_SBKRQ               USART_RQR_SBKRQ_Msk                      /*!< Send Break Request */
-#define USART_RQR_MMRQ_Pos            (2U)    
-#define USART_RQR_MMRQ_Msk            (0x1UL << USART_RQR_MMRQ_Pos)             /*!< 0x00000004 */
-#define USART_RQR_MMRQ                USART_RQR_MMRQ_Msk                       /*!< Mute Mode Request */
-#define USART_RQR_RXFRQ_Pos           (3U)    
-#define USART_RQR_RXFRQ_Msk           (0x1UL << USART_RQR_RXFRQ_Pos)            /*!< 0x00000008 */
-#define USART_RQR_RXFRQ               USART_RQR_RXFRQ_Msk                      /*!< Receive Data flush Request */
-#define USART_RQR_TXFRQ_Pos           (4U)    
-#define USART_RQR_TXFRQ_Msk           (0x1UL << USART_RQR_TXFRQ_Pos)            /*!< 0x00000010 */
-#define USART_RQR_TXFRQ               USART_RQR_TXFRQ_Msk                      /*!< Transmit data flush Request */
-
-/*******************  Bit definition for USART_ISR register  ******************/
-#define USART_ISR_PE_Pos              (0U)    
-#define USART_ISR_PE_Msk              (0x1UL << USART_ISR_PE_Pos)               /*!< 0x00000001 */
-#define USART_ISR_PE                  USART_ISR_PE_Msk                         /*!< Parity Error */
-#define USART_ISR_FE_Pos              (1U)    
-#define USART_ISR_FE_Msk              (0x1UL << USART_ISR_FE_Pos)               /*!< 0x00000002 */
-#define USART_ISR_FE                  USART_ISR_FE_Msk                         /*!< Framing Error */
-#define USART_ISR_NE_Pos              (2U)    
-#define USART_ISR_NE_Msk              (0x1UL << USART_ISR_NE_Pos)               /*!< 0x00000004 */
-#define USART_ISR_NE                  USART_ISR_NE_Msk                         /*!< Noise detected Flag */
-#define USART_ISR_ORE_Pos             (3U)    
-#define USART_ISR_ORE_Msk             (0x1UL << USART_ISR_ORE_Pos)              /*!< 0x00000008 */
-#define USART_ISR_ORE                 USART_ISR_ORE_Msk                        /*!< OverRun Error */
-#define USART_ISR_IDLE_Pos            (4U)    
-#define USART_ISR_IDLE_Msk            (0x1UL << USART_ISR_IDLE_Pos)             /*!< 0x00000010 */
-#define USART_ISR_IDLE                USART_ISR_IDLE_Msk                       /*!< IDLE line detected */
-#define USART_ISR_RXNE_Pos            (5U)    
-#define USART_ISR_RXNE_Msk            (0x1UL << USART_ISR_RXNE_Pos)             /*!< 0x00000020 */
-#define USART_ISR_RXNE                USART_ISR_RXNE_Msk                       /*!< Read Data Register Not Empty */
-#define USART_ISR_TC_Pos              (6U)    
-#define USART_ISR_TC_Msk              (0x1UL << USART_ISR_TC_Pos)               /*!< 0x00000040 */
-#define USART_ISR_TC                  USART_ISR_TC_Msk                         /*!< Transmission Complete */
-#define USART_ISR_TXE_Pos             (7U)    
-#define USART_ISR_TXE_Msk             (0x1UL << USART_ISR_TXE_Pos)              /*!< 0x00000080 */
-#define USART_ISR_TXE                 USART_ISR_TXE_Msk                        /*!< Transmit Data Register Empty */
-#define USART_ISR_LBDF_Pos            (8U)    
-#define USART_ISR_LBDF_Msk            (0x1UL << USART_ISR_LBDF_Pos)             /*!< 0x00000100 */
-#define USART_ISR_LBDF                USART_ISR_LBDF_Msk                       /*!< LIN Break Detection Flag */
-#define USART_ISR_CTSIF_Pos           (9U)    
-#define USART_ISR_CTSIF_Msk           (0x1UL << USART_ISR_CTSIF_Pos)            /*!< 0x00000200 */
-#define USART_ISR_CTSIF               USART_ISR_CTSIF_Msk                      /*!< CTS interrupt flag */
-#define USART_ISR_CTS_Pos             (10U)   
-#define USART_ISR_CTS_Msk             (0x1UL << USART_ISR_CTS_Pos)              /*!< 0x00000400 */
-#define USART_ISR_CTS                 USART_ISR_CTS_Msk                        /*!< CTS flag */
-#define USART_ISR_RTOF_Pos            (11U)   
-#define USART_ISR_RTOF_Msk            (0x1UL << USART_ISR_RTOF_Pos)             /*!< 0x00000800 */
-#define USART_ISR_RTOF                USART_ISR_RTOF_Msk                       /*!< Receiver Time Out */
-#define USART_ISR_EOBF_Pos            (12U)   
-#define USART_ISR_EOBF_Msk            (0x1UL << USART_ISR_EOBF_Pos)             /*!< 0x00001000 */
-#define USART_ISR_EOBF                USART_ISR_EOBF_Msk                       /*!< End Of Block Flag */
-#define USART_ISR_ABRE_Pos            (14U)   
-#define USART_ISR_ABRE_Msk            (0x1UL << USART_ISR_ABRE_Pos)             /*!< 0x00004000 */
-#define USART_ISR_ABRE                USART_ISR_ABRE_Msk                       /*!< Auto-Baud Rate Error */
-#define USART_ISR_ABRF_Pos            (15U)   
-#define USART_ISR_ABRF_Msk            (0x1UL << USART_ISR_ABRF_Pos)             /*!< 0x00008000 */
-#define USART_ISR_ABRF                USART_ISR_ABRF_Msk                       /*!< Auto-Baud Rate Flag */
-#define USART_ISR_BUSY_Pos            (16U)   
-#define USART_ISR_BUSY_Msk            (0x1UL << USART_ISR_BUSY_Pos)             /*!< 0x00010000 */
-#define USART_ISR_BUSY                USART_ISR_BUSY_Msk                       /*!< Busy Flag */
-#define USART_ISR_CMF_Pos             (17U)   
-#define USART_ISR_CMF_Msk             (0x1UL << USART_ISR_CMF_Pos)              /*!< 0x00020000 */
-#define USART_ISR_CMF                 USART_ISR_CMF_Msk                        /*!< Character Match Flag */
-#define USART_ISR_SBKF_Pos            (18U)   
-#define USART_ISR_SBKF_Msk            (0x1UL << USART_ISR_SBKF_Pos)             /*!< 0x00040000 */
-#define USART_ISR_SBKF                USART_ISR_SBKF_Msk                       /*!< Send Break Flag */
-#define USART_ISR_RWU_Pos             (19U)   
-#define USART_ISR_RWU_Msk             (0x1UL << USART_ISR_RWU_Pos)              /*!< 0x00080000 */
-#define USART_ISR_RWU                 USART_ISR_RWU_Msk                        /*!< Receive Wake Up from mute mode Flag */
-#define USART_ISR_WUF_Pos             (20U)   
-#define USART_ISR_WUF_Msk             (0x1UL << USART_ISR_WUF_Pos)              /*!< 0x00100000 */
-#define USART_ISR_WUF                 USART_ISR_WUF_Msk                        /*!< Wake Up from stop mode Flag */
-#define USART_ISR_TEACK_Pos           (21U)   
-#define USART_ISR_TEACK_Msk           (0x1UL << USART_ISR_TEACK_Pos)            /*!< 0x00200000 */
-#define USART_ISR_TEACK               USART_ISR_TEACK_Msk                      /*!< Transmit Enable Acknowledge Flag */
-#define USART_ISR_REACK_Pos           (22U)   
-#define USART_ISR_REACK_Msk           (0x1UL << USART_ISR_REACK_Pos)            /*!< 0x00400000 */
-#define USART_ISR_REACK               USART_ISR_REACK_Msk                      /*!< Receive Enable Acknowledge Flag */
-
-/*******************  Bit definition for USART_ICR register  ******************/
-#define USART_ICR_PECF_Pos            (0U)    
-#define USART_ICR_PECF_Msk            (0x1UL << USART_ICR_PECF_Pos)             /*!< 0x00000001 */
-#define USART_ICR_PECF                USART_ICR_PECF_Msk                       /*!< Parity Error Clear Flag */
-#define USART_ICR_FECF_Pos            (1U)    
-#define USART_ICR_FECF_Msk            (0x1UL << USART_ICR_FECF_Pos)             /*!< 0x00000002 */
-#define USART_ICR_FECF                USART_ICR_FECF_Msk                       /*!< Framing Error Clear Flag */
-#define USART_ICR_NCF_Pos             (2U)    
-#define USART_ICR_NCF_Msk             (0x1UL << USART_ICR_NCF_Pos)              /*!< 0x00000004 */
-#define USART_ICR_NCF                 USART_ICR_NCF_Msk                        /*!< Noise detected Clear Flag */
-#define USART_ICR_ORECF_Pos           (3U)    
-#define USART_ICR_ORECF_Msk           (0x1UL << USART_ICR_ORECF_Pos)            /*!< 0x00000008 */
-#define USART_ICR_ORECF               USART_ICR_ORECF_Msk                      /*!< OverRun Error Clear Flag */
-#define USART_ICR_IDLECF_Pos          (4U)    
-#define USART_ICR_IDLECF_Msk          (0x1UL << USART_ICR_IDLECF_Pos)           /*!< 0x00000010 */
-#define USART_ICR_IDLECF              USART_ICR_IDLECF_Msk                     /*!< IDLE line detected Clear Flag */
-#define USART_ICR_TCCF_Pos            (6U)    
-#define USART_ICR_TCCF_Msk            (0x1UL << USART_ICR_TCCF_Pos)             /*!< 0x00000040 */
-#define USART_ICR_TCCF                USART_ICR_TCCF_Msk                       /*!< Transmission Complete Clear Flag */
-#define USART_ICR_LBDCF_Pos           (8U)    
-#define USART_ICR_LBDCF_Msk           (0x1UL << USART_ICR_LBDCF_Pos)            /*!< 0x00000100 */
-#define USART_ICR_LBDCF               USART_ICR_LBDCF_Msk                      /*!< LIN Break Detection Clear Flag */
-#define USART_ICR_CTSCF_Pos           (9U)    
-#define USART_ICR_CTSCF_Msk           (0x1UL << USART_ICR_CTSCF_Pos)            /*!< 0x00000200 */
-#define USART_ICR_CTSCF               USART_ICR_CTSCF_Msk                      /*!< CTS Interrupt Clear Flag */
-#define USART_ICR_RTOCF_Pos           (11U)   
-#define USART_ICR_RTOCF_Msk           (0x1UL << USART_ICR_RTOCF_Pos)            /*!< 0x00000800 */
-#define USART_ICR_RTOCF               USART_ICR_RTOCF_Msk                      /*!< Receiver Time Out Clear Flag */
-#define USART_ICR_EOBCF_Pos           (12U)   
-#define USART_ICR_EOBCF_Msk           (0x1UL << USART_ICR_EOBCF_Pos)            /*!< 0x00001000 */
-#define USART_ICR_EOBCF               USART_ICR_EOBCF_Msk                      /*!< End Of Block Clear Flag */
-#define USART_ICR_CMCF_Pos            (17U)   
-#define USART_ICR_CMCF_Msk            (0x1UL << USART_ICR_CMCF_Pos)             /*!< 0x00020000 */
-#define USART_ICR_CMCF                USART_ICR_CMCF_Msk                       /*!< Character Match Clear Flag */
-#define USART_ICR_WUCF_Pos            (20U)   
-#define USART_ICR_WUCF_Msk            (0x1UL << USART_ICR_WUCF_Pos)             /*!< 0x00100000 */
-#define USART_ICR_WUCF                USART_ICR_WUCF_Msk                       /*!< Wake Up from stop mode Clear Flag */
-
-/* Compatibility defines with other series */
-#define USART_ICR_NECF                USART_ICR_NCF
-
-/*******************  Bit definition for USART_RDR register  ******************/
-#define USART_RDR_RDR_Pos             (0U)    
-#define USART_RDR_RDR_Msk             (0x1FFUL << USART_RDR_RDR_Pos)            /*!< 0x000001FF */
-#define USART_RDR_RDR                 USART_RDR_RDR_Msk                        /*!< RDR[8:0] bits (Receive Data value) */
-
-/*******************  Bit definition for USART_TDR register  ******************/
-#define USART_TDR_TDR_Pos             (0U)    
-#define USART_TDR_TDR_Msk             (0x1FFUL << USART_TDR_TDR_Pos)            /*!< 0x000001FF */
-#define USART_TDR_TDR                 USART_TDR_TDR_Msk                        /*!< TDR[8:0] bits (Transmit Data value) */
-
-/******************************************************************************/
-/*                                                                            */
-/*                         Window WATCHDOG (WWDG)                             */
-/*                                                                            */
-/******************************************************************************/
-
-/*******************  Bit definition for WWDG_CR register  ********************/
-#define WWDG_CR_T_Pos           (0U)          
-#define WWDG_CR_T_Msk           (0x7FUL << WWDG_CR_T_Pos)                       /*!< 0x0000007F */
-#define WWDG_CR_T               WWDG_CR_T_Msk                                  /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
-#define WWDG_CR_T_0             (0x01UL << WWDG_CR_T_Pos)                       /*!< 0x00000001 */
-#define WWDG_CR_T_1             (0x02UL << WWDG_CR_T_Pos)                       /*!< 0x00000002 */
-#define WWDG_CR_T_2             (0x04UL << WWDG_CR_T_Pos)                       /*!< 0x00000004 */
-#define WWDG_CR_T_3             (0x08UL << WWDG_CR_T_Pos)                       /*!< 0x00000008 */
-#define WWDG_CR_T_4             (0x10UL << WWDG_CR_T_Pos)                       /*!< 0x00000010 */
-#define WWDG_CR_T_5             (0x20UL << WWDG_CR_T_Pos)                       /*!< 0x00000020 */
-#define WWDG_CR_T_6             (0x40UL << WWDG_CR_T_Pos)                       /*!< 0x00000040 */
-
-/* Legacy defines */
-#define  WWDG_CR_T0    WWDG_CR_T_0
-#define  WWDG_CR_T1    WWDG_CR_T_1
-#define  WWDG_CR_T2    WWDG_CR_T_2
-#define  WWDG_CR_T3    WWDG_CR_T_3
-#define  WWDG_CR_T4    WWDG_CR_T_4
-#define  WWDG_CR_T5    WWDG_CR_T_5
-#define  WWDG_CR_T6    WWDG_CR_T_6
-
-#define WWDG_CR_WDGA_Pos        (7U)          
-#define WWDG_CR_WDGA_Msk        (0x1UL << WWDG_CR_WDGA_Pos)                     /*!< 0x00000080 */
-#define WWDG_CR_WDGA            WWDG_CR_WDGA_Msk                               /*!< Activation bit */
-
-/*******************  Bit definition for WWDG_CFR register  *******************/
-#define WWDG_CFR_W_Pos          (0U)          
-#define WWDG_CFR_W_Msk          (0x7FUL << WWDG_CFR_W_Pos)                      /*!< 0x0000007F */
-#define WWDG_CFR_W              WWDG_CFR_W_Msk                                 /*!< W[6:0] bits (7-bit window value) */
-#define WWDG_CFR_W_0            (0x01UL << WWDG_CFR_W_Pos)                      /*!< 0x00000001 */
-#define WWDG_CFR_W_1            (0x02UL << WWDG_CFR_W_Pos)                      /*!< 0x00000002 */
-#define WWDG_CFR_W_2            (0x04UL << WWDG_CFR_W_Pos)                      /*!< 0x00000004 */
-#define WWDG_CFR_W_3            (0x08UL << WWDG_CFR_W_Pos)                      /*!< 0x00000008 */
-#define WWDG_CFR_W_4            (0x10UL << WWDG_CFR_W_Pos)                      /*!< 0x00000010 */
-#define WWDG_CFR_W_5            (0x20UL << WWDG_CFR_W_Pos)                      /*!< 0x00000020 */
-#define WWDG_CFR_W_6            (0x40UL << WWDG_CFR_W_Pos)                      /*!< 0x00000040 */
-
-/* Legacy defines */
-#define  WWDG_CFR_W0    WWDG_CFR_W_0
-#define  WWDG_CFR_W1    WWDG_CFR_W_1
-#define  WWDG_CFR_W2    WWDG_CFR_W_2
-#define  WWDG_CFR_W3    WWDG_CFR_W_3
-#define  WWDG_CFR_W4    WWDG_CFR_W_4
-#define  WWDG_CFR_W5    WWDG_CFR_W_5
-#define  WWDG_CFR_W6    WWDG_CFR_W_6
-
-#define WWDG_CFR_WDGTB_Pos      (7U)          
-#define WWDG_CFR_WDGTB_Msk      (0x3UL << WWDG_CFR_WDGTB_Pos)                   /*!< 0x00000180 */
-#define WWDG_CFR_WDGTB          WWDG_CFR_WDGTB_Msk                             /*!< WDGTB[1:0] bits (Timer Base) */
-#define WWDG_CFR_WDGTB_0        (0x1UL << WWDG_CFR_WDGTB_Pos)                   /*!< 0x00000080 */
-#define WWDG_CFR_WDGTB_1        (0x2UL << WWDG_CFR_WDGTB_Pos)                   /*!< 0x00000100 */
-
-/* Legacy defines */
-#define  WWDG_CFR_WDGTB0    WWDG_CFR_WDGTB_0
-#define  WWDG_CFR_WDGTB1    WWDG_CFR_WDGTB_1
-
-#define WWDG_CFR_EWI_Pos        (9U)          
-#define WWDG_CFR_EWI_Msk        (0x1UL << WWDG_CFR_EWI_Pos)                     /*!< 0x00000200 */
-#define WWDG_CFR_EWI            WWDG_CFR_EWI_Msk                               /*!< Early Wakeup Interrupt */
-
-/*******************  Bit definition for WWDG_SR register  ********************/
-#define WWDG_SR_EWIF_Pos        (0U)          
-#define WWDG_SR_EWIF_Msk        (0x1UL << WWDG_SR_EWIF_Pos)                     /*!< 0x00000001 */
-#define WWDG_SR_EWIF            WWDG_SR_EWIF_Msk                               /*!< Early Wakeup Interrupt Flag */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_macros
-  * @{
-  */
-
-/******************************* ADC Instances ********************************/
-#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
-#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC1_COMMON)
-
-/******************************* AES Instances ********************************/
-#define IS_AES_ALL_INSTANCE(INSTANCE) ((INSTANCE) == AES)
-
-/******************************* COMP Instances *******************************/
-#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
-                                       ((INSTANCE) == COMP2))
-
-#define IS_COMP_COMMON_INSTANCE(COMMON_INSTANCE) ((COMMON_INSTANCE) == COMP12_COMMON)
-
-/******************************* CRC Instances ********************************/
-#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
-
-/******************************* DMA Instances *********************************/
-#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
-                                       ((INSTANCE) == DMA1_Channel2) || \
-                                       ((INSTANCE) == DMA1_Channel3) || \
-                                       ((INSTANCE) == DMA1_Channel4) || \
-                                       ((INSTANCE) == DMA1_Channel5) || \
-                                       ((INSTANCE) == DMA1_Channel6) || \
-                                       ((INSTANCE) == DMA1_Channel7))
-
-/******************************* GPIO Instances *******************************/
-#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
-                                        ((INSTANCE) == GPIOB) || \
-                                        ((INSTANCE) == GPIOC) || \
-                                        ((INSTANCE) == GPIOD) || \
-                                        ((INSTANCE) == GPIOH))
-
-#define IS_GPIO_AF_INSTANCE(INSTANCE)  (((INSTANCE) == GPIOA) || \
-                                        ((INSTANCE) == GPIOB) || \
-                                        ((INSTANCE) == GPIOC) || \
-                                        ((INSTANCE) == GPIOD))
-
-/******************************** I2C Instances *******************************/
-#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
-                                       ((INSTANCE) == I2C2))
-
-/****************** I2C Instances : wakeup capability from stop modes *********/
-#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) (((INSTANCE) == I2C1))
-
-
-/******************************** I2S Instances *******************************/
-#define IS_I2S_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == SPI2)
-
-
-/****************************** RTC Instances *********************************/
-#define IS_RTC_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == RTC)
-
-/******************************** SMBUS Instances *****************************/
-#define IS_SMBUS_INSTANCE(INSTANCE)  ((INSTANCE) == I2C1)
-
-/******************************** SPI Instances *******************************/
-#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
-                                       ((INSTANCE) == SPI2))
-
-/****************** LPTIM Instances : All supported instances *****************/
-#define IS_LPTIM_INSTANCE(INSTANCE)       ((INSTANCE) == LPTIM1)
-
-/************* LPTIM instances supporting the encoder mode feature ************/
-#define IS_LPTIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) ((INSTANCE) == LPTIM1)
-
-/****************** TIM Instances : All supported instances *******************/
-#define IS_TIM_INSTANCE(INSTANCE)       (((INSTANCE) == TIM2)   || \
-                                         ((INSTANCE) == TIM6)   || \
-                                         ((INSTANCE) == TIM21)  || \
-                                         ((INSTANCE) == TIM22))
-
-/************* TIM Instances : at least 1 capture/compare channel *************/
-#define IS_TIM_CC1_INSTANCE(INSTANCE)   (((INSTANCE) == TIM2)  || \
-                                         ((INSTANCE) == TIM21) || \
-                                         ((INSTANCE) == TIM22))
-
-/************ TIM Instances : at least 2 capture/compare channels *************/
-#define IS_TIM_CC2_INSTANCE(INSTANCE)  (((INSTANCE) == TIM2)  || \
-                                        ((INSTANCE) == TIM21) || \
-                                        ((INSTANCE) == TIM22))
-
-/************ TIM Instances : at least 3 capture/compare channels *************/
-#define IS_TIM_CC3_INSTANCE(INSTANCE)   ((INSTANCE) == TIM2)
-
-/************ TIM Instances : at least 4 capture/compare channels *************/
-#define IS_TIM_CC4_INSTANCE(INSTANCE)   ((INSTANCE) == TIM2)
-
-/****************** TIM Instances : DMA requests generation (UDE) *************/
-#define IS_TIM_DMA_INSTANCE(INSTANCE)      (((INSTANCE) == TIM2) || \
-                                            ((INSTANCE) == TIM6))
-
-/************ TIM Instances : DMA requests generation (CCxDE) *****************/
-#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)   ((INSTANCE) == TIM2)
-
-/******************** TIM Instances : DMA burst feature ***********************/
-#define IS_TIM_DMABURST_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
-
-/******************* TIM Instances : output(s) available **********************/
-#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
-    ((((INSTANCE) == TIM2) &&                  \
-     (((CHANNEL) == TIM_CHANNEL_1) ||          \
-      ((CHANNEL) == TIM_CHANNEL_2) ||          \
-      ((CHANNEL) == TIM_CHANNEL_3) ||          \
-      ((CHANNEL) == TIM_CHANNEL_4)))           \
-     ||                                        \
-     (((INSTANCE) == TIM21) &&                 \
-      (((CHANNEL) == TIM_CHANNEL_1) ||         \
-       ((CHANNEL) == TIM_CHANNEL_2)))          \
-     ||                                        \
-     (((INSTANCE) == TIM22) &&                 \
-      (((CHANNEL) == TIM_CHANNEL_1) ||         \
-       ((CHANNEL) == TIM_CHANNEL_2))))
-
-/****************** TIM Instances : supporting clock division *****************/
-#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)       (((INSTANCE) == TIM2)   || \
-                                                        ((INSTANCE) == TIM21)  || \
-                                                        ((INSTANCE) == TIM22))
-
-/****** TIM Instances : supporting external clock mode 1 for ETRF input *******/
-#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)   (((INSTANCE) == TIM2)   || \
-                                                          ((INSTANCE) == TIM21))
-
-/****** TIM Instances : supporting external clock mode 2 for ETRF input *******/
-#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)   (((INSTANCE) == TIM2)   || \
-                                                          ((INSTANCE) == TIM21)  || \
-                                                          ((INSTANCE) == TIM22))
-
-/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/
-#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)        (((INSTANCE) == TIM2)   || \
-                                                          ((INSTANCE) == TIM21))
-
-/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/
-#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)       (((INSTANCE) == TIM2)   || \
-                                                          ((INSTANCE) == TIM21)  || \
-                                                          ((INSTANCE) == TIM22))
-
-/****************** TIM Instances : supporting counting mode selection ********/ 
-#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)       (((INSTANCE) == TIM2)   || \
-                                                             ((INSTANCE) == TIM21)  || \
-                                                             ((INSTANCE) == TIM22))
-
-/****************** TIM Instances : supporting encoder interface **************/
-#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
-                                                     ((INSTANCE) == TIM21)  || \
-                                                     ((INSTANCE) == TIM22))
-
-/***************** TIM Instances : external trigger input availabe ************/
-#define IS_TIM_ETR_INSTANCE(INSTANCE)      (((INSTANCE) == TIM2)  || \
-                                            ((INSTANCE) == TIM21) || \
-                                            ((INSTANCE) == TIM22))
-
-/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
-#define IS_TIM_MASTER_INSTANCE(INSTANCE)   (((INSTANCE) == TIM2)  || \
-                                            ((INSTANCE) == TIM6)  || \
-                                            ((INSTANCE) == TIM21) || \
-                                            ((INSTANCE) == TIM22))
-
-/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
-#define IS_TIM_SLAVE_INSTANCE(INSTANCE)    (((INSTANCE) == TIM2)  || \
-                                            ((INSTANCE) == TIM21) || \
-                                            ((INSTANCE) == TIM22))
-
-/****************** TIM Instances : remapping capability **********************/
-#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)   || \
-                                         ((INSTANCE) == TIM21)  || \
-                                         ((INSTANCE) == TIM22))
-
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
-/******************* TIM Instances : output(s) OCXEC register *****************/
-#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
-
-/******************* TIM Instances : Timer input XOR function *****************/
-#define IS_TIM_XOR_INSTANCE(INSTANCE)   ((INSTANCE) == TIM2)
-
-/******************** UART Instances : Asynchronous mode **********************/
-#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
-                                    ((INSTANCE) == USART2))
-
-/******************** USART Instances : Synchronous mode **********************/
-#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
-                                     ((INSTANCE) == USART2))
-
-/****************** USART Instances : Auto Baud Rate detection ****************/
-
-#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
-                                                            ((INSTANCE) == USART2))
-
-/****************** UART Instances : Driver Enable *****************/
-#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE)    (((INSTANCE) == USART1) || \
-                                                  ((INSTANCE) == USART2) || \
-                                                  ((INSTANCE) == LPUART1))
-
-/******************** UART Instances : Half-Duplex mode **********************/
-#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE)    (((INSTANCE) == USART1) || \
-                                                  ((INSTANCE) == USART2) || \
-                                                  ((INSTANCE) == LPUART1))
-
-/******************** UART Instances : LIN mode **********************/
-#define IS_UART_LIN_INSTANCE(INSTANCE)    (((INSTANCE) == USART1) || \
-                                           ((INSTANCE) == USART2))
-
-/******************** UART Instances : Wake-up from Stop mode **********************/
-#define IS_UART_WAKEUP_FROMSTOP_INSTANCE(INSTANCE)   (((INSTANCE) == USART1) || \
-                                                      ((INSTANCE) == USART2) || \
-                                                      ((INSTANCE) == LPUART1))
-
-/****************** UART Instances : Hardware Flow control ********************/
-#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
-                                           ((INSTANCE) == USART2) || \
-                                           ((INSTANCE) == LPUART1))
-
-/********************* UART Instances : Smard card mode ***********************/
-#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
-                                         ((INSTANCE) == USART2))
-
-/*********************** UART Instances : IRDA mode ***************************/
-#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
-                                    ((INSTANCE) == USART2))
-
-/******************** LPUART Instance *****************************************/
-#define IS_LPUART_INSTANCE(INSTANCE)    ((INSTANCE) == LPUART1)
-
-/****************************** IWDG Instances ********************************/
-#define IS_IWDG_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == IWDG)
-
-/****************************** WWDG Instances ********************************/
-#define IS_WWDG_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == WWDG)
-
-/**
-  * @}
-  */
-
-/******************************************************************************/
-/*  For a painless codes migration between the STM32L0xx device product       */
-/*  lines, the aliases defined below are put in place to overcome the         */
-/*  differences in the interrupt handlers and IRQn definitions.               */
-/*  No need to update developed interrupt code when moving across             */ 
-/*  product lines within the same STM32L0 Family                              */
-/******************************************************************************/
-
-/* Aliases for __IRQn */
-
-#define RNG_LPUART1_IRQn               AES_LPUART1_IRQn
-#define LPUART1_IRQn                   AES_LPUART1_IRQn
-#define AES_RNG_LPUART1_IRQn           AES_LPUART1_IRQn
-#define TIM6_DAC_IRQn                  TIM6_IRQn
-#define RCC_CRS_IRQn                   RCC_IRQn
-#define DMA1_Channel4_5_IRQn           DMA1_Channel4_5_6_7_IRQn
-#define ADC1_IRQn                      ADC1_COMP_IRQn
-
-/* Aliases for __IRQHandler */
-#define LPUART1_IRQHandler             AES_LPUART1_IRQHandler
-#define RNG_LPUART1_IRQHandler         AES_LPUART1_IRQHandler
-#define AES_RNG_LPUART1_IRQHandler     AES_LPUART1_IRQHandler
-#define TIM6_DAC_IRQHandler            TIM6_IRQHandler
-#define RCC_CRS_IRQHandler             RCC_IRQHandler
-#define DMA1_Channel4_5_IRQHandler     DMA1_Channel4_5_6_7_IRQHandler
-#define ADC1_IRQHandler                ADC1_COMP_IRQHandler
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32L061xx_H */
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Include/stm32l062xx.h b/Include/stm32l062xx.h
index 5af44ed..d62948c 100644
--- a/Include/stm32l062xx.h
+++ b/Include/stm32l062xx.h
@@ -3639,7 +3639,9 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
 
@@ -5585,13 +5587,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7369,9 +7365,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l063xx.h b/Include/stm32l063xx.h
index 1f05574..80d7b07 100644
--- a/Include/stm32l063xx.h
+++ b/Include/stm32l063xx.h
@@ -3781,7 +3781,9 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
 
@@ -5742,13 +5744,7 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
-#define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7526,9 +7522,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)  ((INSTANCE) == TIM2)
 
diff --git a/Include/stm32l071xx.h b/Include/stm32l071xx.h
index 1d34ed8..89bf002 100644
--- a/Include/stm32l071xx.h
+++ b/Include/stm32l071xx.h
@@ -3271,8 +3271,12 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5223,13 +5227,8 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
 #define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -6372,9 +6371,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
                                                 ((INSTANCE) == TIM3))
diff --git a/Include/stm32l072xx.h b/Include/stm32l072xx.h
index 377c44d..adb8c21 100644
--- a/Include/stm32l072xx.h
+++ b/Include/stm32l072xx.h
@@ -3659,9 +3659,13 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5726,13 +5730,8 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
 #define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7551,9 +7550,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
                                                 ((INSTANCE) == TIM3))
diff --git a/Include/stm32l073xx.h b/Include/stm32l073xx.h
index 8b98906..eba7029 100644
--- a/Include/stm32l073xx.h
+++ b/Include/stm32l073xx.h
@@ -3801,9 +3801,13 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5885,13 +5889,8 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
 #define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7710,9 +7709,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
                                                 ((INSTANCE) == TIM3))
diff --git a/Include/stm32l081xx.h b/Include/stm32l081xx.h
index 2599c58..971d92d 100644
--- a/Include/stm32l081xx.h
+++ b/Include/stm32l081xx.h
@@ -3399,8 +3399,12 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5360,13 +5364,8 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
 #define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -6512,9 +6511,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
                                                 ((INSTANCE) == TIM3))
diff --git a/Include/stm32l082xx.h b/Include/stm32l082xx.h
index 94159e8..3af095f 100644
--- a/Include/stm32l082xx.h
+++ b/Include/stm32l082xx.h
@@ -3787,9 +3787,13 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -5863,13 +5867,8 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
 #define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7691,9 +7690,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
                                                 ((INSTANCE) == TIM3))
diff --git a/Include/stm32l083xx.h b/Include/stm32l083xx.h
index 0b108ba..13d9e97 100644
--- a/Include/stm32l083xx.h
+++ b/Include/stm32l083xx.h
@@ -3929,9 +3929,13 @@
 /*                         Reset and Clock Control                            */
 /*                                                                            */
 /******************************************************************************/
-
+/*
+* @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
+*/
 #define RCC_HSI48_SUPPORT           /*!< HSI48 feature support */
 #define RCC_HSECSS_SUPPORT          /*!< HSE CSS feature activation support */
+#define RCC_MCO3_SUPPORT            /*!<Support MCO3 */
+#define RCC_MCO3_AF2_SUPPORT        /*!<Support MCO3 on Alternate Function AF0 */
 
 /********************  Bit definition for RCC_CR register  ********************/
 #define RCC_CR_HSION_Pos                 (0U) 
@@ -6022,13 +6026,8 @@
 /*
 * @brief Specific device feature definitions (not present on all devices in the STM32L0 family)
 */
-#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \
-    || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
 #define TIM_TIM2_REMAP_HSI_SUPPORT       /*!<Support remap HSI on TIM2 */
 #define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#else
-#define TIM_TIM2_REMAP_HSI48_SUPPORT     /*!<Support remap HSI48 on TIM2 */
-#endif	
 
 /*******************  Bit definition for TIM_CR1 register  ********************/
 #define TIM_CR1_CEN_Pos           (0U)        
@@ -7850,9 +7849,6 @@
                                          ((INSTANCE) == TIM21)  || \
                                          ((INSTANCE) == TIM22))
 
-/****************** TIM Instances : supporting synchronization ****************/
-#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)  IS_TIM_MASTER_INSTANCE(INSTANCE)
-
 /******************* TIM Instances : output(s) OCXEC register *****************/
 #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
                                                 ((INSTANCE) == TIM3))
diff --git a/Include/stm32l0xx.h b/Include/stm32l0xx.h
index c37e141..e4a67f4 100644
--- a/Include/stm32l0xx.h
+++ b/Include/stm32l0xx.h
@@ -63,7 +63,7 @@
     !defined (STM32L011xx) && !defined (STM32L021xx) && \
     !defined (STM32L031xx) && !defined (STM32L041xx) && \
     !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \
-    !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \
+    !defined (STM32L062xx) && !defined (STM32L063xx) && \
     !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \
     !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx)
   /* #define STM32L010x4 */   /*!< STM32L010K4, STM32L010F4 Devices                                                                                                                      */
@@ -77,7 +77,6 @@
   /* #define STM32L051xx */   /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8, STM32L051K6, STM32L051T6, STM32L051T8 Devices                                        */
   /* #define STM32L052xx */   /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8, STM32L052T6, STM32L052T8 Devices                                        */
   /* #define STM32L053xx */   /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices                                                                                            */
-  /* #define STM32L061xx */   /*!< */
   /* #define STM32L062xx */   /*!< STM32L062K8 Devices                                                                                                                                   */
   /* #define STM32L063xx */   /*!< STM32L063C8, STM32L063R8 Devices                                                                                                                      */
   /* #define STM32L071xx */   /*!< STM32L071V8, STM32L071K8, STM32L071VB, STM32L071RB, STM32L071CB, STM32L071KB, STM32L071VZ, STM32L071RZ, STM32L071CZ, STM32L071KZ, STM32L071C8 Devices */
@@ -105,7 +104,7 @@
   */
 #define __STM32L0xx_CMSIS_VERSION_MAIN   (0x01) /*!< [31:24] main version */
 #define __STM32L0xx_CMSIS_VERSION_SUB1   (0x09) /*!< [23:16] sub1 version */
-#define __STM32L0xx_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32L0xx_CMSIS_VERSION_SUB2   (0x01) /*!< [15:8]  sub2 version */
 #define __STM32L0xx_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
 #define __STM32L0xx_CMSIS_VERSION        ((__STM32L0xx_CMSIS_VERSION_MAIN     << 24)\
                                          |(__STM32L0xx_CMSIS_VERSION_SUB1 << 16)\
@@ -145,8 +144,6 @@
   #include "stm32l062xx.h"
 #elif defined(STM32L063xx)
   #include "stm32l063xx.h"
-#elif defined(STM32L061xx)
-  #include "stm32l061xx.h"
 #elif defined(STM32L071xx)
   #include "stm32l071xx.h"
 #elif defined(STM32L072xx)
diff --git a/License.md b/License.md
index 64783f9..e0d829b 100644
--- a/License.md
+++ b/License.md
@@ -81,4 +81,3 @@
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-
diff --git a/README.md b/README.md
index bcc5bf3..edafd52 100644
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-# STM32CubeL0 CMSIS Device MCU Component
+# STM32CubeG4 CMSIS Device MCU Component
 
 ## Overview
 
@@ -19,17 +19,23 @@
 
 This **cmsis_device_l0** MCU component repo is one element of the STM32CubeL0 MCU embedded software package, providing the **cmsis device** part.
 
+## Release note
+
+Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/cmsis_device_l0/blob/master/Release_Notes.html).
+
 ## Compatibility information
 
 In this table, you can find the successive versions of this CMSIS Device component, in-line with the corresponding versions of the full MCU package:
 
 CMSIS Device L0 | CMSIS Core | Was delivered in the full MCU package
 --------------- | ---------- | -------------------------------------
-Tag v1.9.0 | Tag v4.5_cm0 | Tag v1.11.2
+Tag v1.9.0 | Tag v5.4.0_cm0 | Tag v1.11.0 (and following, if any, till next new tag)
+Tag v1.9.1 | Tag v5.4.0_cm0 | Tag v1.12.0 (and following, if any, till next new tag)
+
 
 The full **STM32CubeL0** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeL0).
 
 ## Troubleshooting
 If you have any issue with the **Software content** of this repo, you can [file an issue on Github](https://github.com/STMicroelectronics/cmsis_device_l0/issues/new).
 
-For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
+For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
\ No newline at end of file
diff --git a/Release_Notes.html b/Release_Notes.html
index 97a9f83..a38f343 100644
--- a/Release_Notes.html
+++ b/Release_Notes.html
@@ -1,441 +1,369 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
-<script><endnote><head>
-<script><endnote><head>
-<script><endnote><head>
-<script><endnote><head>
-<script></script>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<link rel="File-List" href="Release_Notes_files/filelist.xml">
-<link rel="Edit-Time-Data" href="Release_Notes_files/editdata.mso"><title>Release Notes for STM32L0xx CMSIS</title>
-
-<style>
-div.Section1 {
-page: Section1;
-font-family: Arial,Helvetica,sans-serif;
-}
-h1 {
-font-size: 24pt;
-font-weight: bold;
-font-family: Arial,Helvetica,sans-serif;
-text-align: center;
-color: #3366ff;
-}
-h2 {
-margin: 12pt 0in 3pt;
-page-break-after: avoid;
-font-weight: bold;
-font-family: Arial,Helvetica,sans-serif;
-background-color: #3366ff;
-color: white;
-padding-left: 5px;
-font-size: 16pt;
-}
-h3 {
-margin-left: 0in;
-font-weight: bold;
-font-family: Arial,Helvetica,sans-serif;
-background-color: #3366ff;
-width: 200px;
-margin-right: 500pt;
-color: white;
-padding-left: 5px;
-padding-top: 2px;
-padding-bottom: 2px;
-font-size: 12pt;
-}
-h4 {
-font-family: Arial,Helvetica,sans-serif;
-font-weight: bold;
-text-decoration: underline;
-font-size: 12pt;
-}
-p {
-margin: 0px 0px 0px 0in;
-font-family: Arial,Helvetica,sans-serif;
-padding-top: 3px;
-padding-bottom: 3px;
-font-size: 12pt;
-}
-ul {
-font-family: Arial,Helvetica,sans-serif;
-margin-top: 3px;
-margin-bottom: 3px;
-font-size: 10pt;
-}
-caption {
-margin-top: 10px;
-font-family: Arial,Helvetica,sans-serif;
-font-size: 11pt;
-}
-hr {
-width: 100%;
-}
-.guidance {
-background-color: #e5b8b7;
-font-style: italic;
-font-family: Arial,Helvetica,sans-serif;
-padding-top: 3px;
-padding-bottom: 3px;
-margin-top: 3px;
-margin-bottom: 3px;
-font-size: 10pt;
-}
-.guidance_title {
-font-style: normal;
-font-weight: bold;
-text-decoration: underline;
-font-family: Arial,Helvetica,sans-serif;
-font-size: 10pt;
-}
-.tickets {
-border: 1pt solid #9cc2e5;
-font-family: Arial,Helvetica,sans-serif;
-margin-bottom: 3px;
-margin-top: 3px;
-font-size: 10pt;
-}
-.tickets th {
-border: 1pt solid #9cc2e5;
-font-size: 12pt;
-background-color: #39a9dc;
-color: white;
-text-align: center;
-}
-.tickets td {
-border: 1pt solid #9cc2e5;
-min-height: 32px;
-}
-tr:nth-child(even) {background-color: #cee2f2;}
-tr:nth-child(even) {background-color: #e8f1f9;}
-.topic1 {
-margin-top: 3px;
-margin-bottom: 3px;
-margin-left: 40px;
-}
-.topic2 {
-margin-top: 3px;
-margin-bottom: 3px;
-}
-.topic3 {
-margin-top: 3px;
-margin-bottom: 3px;
-margin-left: 20px;
-}
-#purpose {
-margin-top: 3px;
-margin-bottom: 3px;
-}
-#identification {
-margin-top: 3px;
-margin-bottom: 3px;
-}
-</style><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>Raouf Hosni</o:LastAuthor> <o:Revision>69</o:Revision> <o:TotalTime>153</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-07-21T16:16:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>410</o:Words> <o:Characters>2339</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>19</o:Lines> <o:Paragraphs>5</o:Paragraphs> <o:CharactersWithSpaces>2744</o:CharactersWithSpaces> <o:Version>11.8132</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:SpellingState>Clean</w:SpellingState> <w:GrammarState>Clean</w:GrammarState> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="6146"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head>
-<body link="blue" vlink="blue">
-<script type="text/javascript">
-var toggle_hist_disp = true;
-function toggle_history()
-{
-if (toggle_hist_disp)
-{
-toggle_hist_disp = false;
-var filter_off_text = document.createTextNode("Hide History");
-document.getElementById('filter_hist').innerHTML = "";
-document.getElementById('filter_hist').appendChild(filter_off_text);
-document.getElementById("history").hidden = false;
-}
-else
-{
-toggle_hist_disp = true;
-var filter_on_text = document.createTextNode("Show History");
-document.getElementById('filter_hist').innerHTML = "";
-document.getElementById('filter_hist').appendChild(filter_on_text);
-document.getElementById("history").hidden = true;
-}
-}</script>
-<div style="width: 1034px;" class="Section1"><span style="font-size: 8pt; font-family: &quot;Arial&quot;,&quot;sans-serif&quot;; color: blue;"></span><small><a href="../../../../../Release_Notes.html">Back to Release page</a></small>
-<div id="header">
-<h1 style="margin-bottom: 18pt; text-align: center;" align="center">Release
-Notes for&nbsp;<span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">STM32L0xx
-CMSIS</span></h1>
-<p style="text-align: center;">Copyright 2016
-STMicroelectronics</p>
-<p style="text-align: center;"><span style="font-size: 10pt; font-family: &quot;Arial&quot;,&quot;sans-serif&quot;; color: black;"><img style="border: 0px solid ; width: 112px; height: 83px;" alt="" id="_x0000_i1026" src="_htmresc/st_logo.png"></span></p>
-</div>
-<div id="license" class="topic1">
-<h2>License</h2>
-This software component is licensed by ST under BSD 3-Clause
-license, the "License"; You may not use this component except in
-compliance with
-the License. You may obtain a copy of the License at:
-<p style="text-align: center;"><a href="https://opensource.org/licenses/BSD-3-Clause" target="_blank">https://opensource.org/licenses/BSD-3-Clause</a></p>
-</div>
-<br>
-<div id="release_container" class="topic1">
-<div class="topic2" id="identification">
-<h3>V1.9.0 / 26-October-2018</h3>
-</div>
-<div class="topic3" id="changes">
-<h4><big>Main changes</big></h4><ul><li><big>Add the support of <span style="font-weight: bold;">STM32L010xx</span> devices</big></li><ul><li><big>Add stm32l010xb.h, stm32l010x8.h, stm32l010x6.h and stm32l010x4.h device description files</big></li></ul><ul><li><big>Add
-startup_stm32l010xb.s, startup_stm32l010x8.s,
-startup_stm32l010x6.s and startup_stm32l010x4.s </big><big>startup files </big><big>for EWARM, MDK-ARM and
-SW4STM32 toolchains</big></li></ul><ul><li><big>Add EWARM associated linker files for execution from internal RAM or internal FLASH</big></li></ul></ul><big><br></big><ul><li><big>stm32l0xx.h</big></li><ul><li><big>Add the following device defines:</big></li><ul><li><big>"#define STM32L010xB" for all STM32L010xB devices</big></li><li><big>"#define STM32L010x8" for all STM32L010x8 devices</big></li><li><big>"#define STM32L010x6" for all STM32L010x6 devices</big></li><li><big>"#define STM32L010x4" for all STM32L010x4 devices</big></li></ul><li><big>Align ErrorStatus typedef to common error handling.<br></big></li></ul></ul><br><ul><li><big>All stm32l0xxxx.h device description files.h</big></li><ul><li><big>[MISRAC2012-Rule-10.6] Use 'UL' postfix for _Msk definitions and memory/peripheral base addresses</big></li><li><big>Correct comments in the bit definition of RCC_AHBRST, RCC_APB2RSTR and RCC_APB1RSTR registers.</big></li><li><big>Rename RTC_CR_BCK bit to RTC_CR_BKP to be aligned with reference manual.</big></li><li><big>Add missing definition of IS_TSC_ALL_INSTANCE after TSC driver update.</big></li><li><big>Add back the bit definition of SYSCFG_CFGR3_EN_VREFINT in SYSCFG_CFGR3 register.</big></li><li><big>Rename GPIO_AFRL_AFRLx and GPIO_AFRL_AFRHx bit definitions (from GPIO_AFRL/AFRH registers) to GPIO_AFRL_AFSELx.</big></li><li><big>Align IS_TIM_XXX_INSTANCE definitions with other series.</big></li><li><big>Remove cast (uint8_t) in CRC_IDR_IDR definition.</big></li><li><big>Add missing definition of IS_PCD_ALL_INSTANCE macro after USB driver update.</big></li><li><big>Add definition of IS_UART_DRIVER_ENABLE_INSTANCE macro after UART driver update.</big></li><li><big>Add compatibility definition of USART_ICR_NECF / USART_ICR_NCF with others series.</big></li><li><big>Update IS_UART_INSTANCE macro definition.</big></li><li><big>Add definition of I</big><big>S_LPTIM_ENCODER_INTERFACE_INSTANCE macro after LPTIM driver update.</big></li><li><big>Move definition of FLASH_BANK2_BASE start address to stm32l0xx_hal_flash.h to be dependant on&nbsp;Memory Size register.</big></li><li><big>Update interrupt definition to use </big><big>DMA1_Channel4_5_IRQn&nbsp;</big><big> for STM32L011xx and STM32L021xx devices.</big></li><li><big>Correct PWR_WAKEUP_PIN definitions for L011xx and L021xx devices.<br></big></li></ul></ul><br><ul><li><big>system_stm32l0xx.c</big></li><ul><li><big>Update file to correct comments for VECT_TAB_OFFSET definition.</big></li><li><big>Update default MSI_VALUE reset value set in SystemCoreClock.</big></li><li><big>Update SystemCoreClockUpdate() function to check HSI16DIVF for HSI divided by 4.<br></big></li></ul></ul><ul><li><big>startup_stm32l0xxxx.s</big></li><ul><li><big>Update startup files to use DMA1_Channel4_5_IRQn/IRQHandler for STM32L011xx and STM32L01xx devices.<br></big></li></ul></ul><br><br></div>
-<br>
-</div>
-<div style="margin-left: 40px;"><button id="filter_hist" onclick="toggle_history()">Show
-History</button><br>
-</div>
-<div id="history" class="topic1" hidden="">
-<h2>Update History</h2>
-<b><u><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"></span></u></b><br><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.8.0
-/ 12-January-2018</span></h3>
-<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">
-</span></u></b>
-<ul><li><span style="color: rgb(0, 0, 0); font-family: Verdana,sans-serif; font-size: 13.3333px; font-style: normal; font-variant: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 1; word-spacing: 0px; display: inline ! important; float: none;">Internal Release.</span></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.7.2
-/ 25-August-2017</span></h3>
-<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-<ul><li><span style="text-align: left; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Verdana; font-style: normal; font-variant: normal; font-weight: normal; font-size: 13px; line-height: normal; font-stretch: normal; white-space: normal; color: rgb(0, 0, 0); word-spacing: 0px; display: inline ! important;">Removed DATE and VERSION fields from header files.</span></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.7.1
-/ 25-November-2016</span></h3>
-<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-<ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Updated IS_COMP_COMMON_INSTANCE() macro.</big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Corrected ADC_CFGR2_TOVS bit and mask definitions.<br></big></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.7.0
-/ 31-May-2016</span></h3>
-<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-<ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added&nbsp;Pos and Msk macros missing within the CMSIS stm32l083xx.h file.</big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added LCD_CR_BUFEN bit definition in LCD CR register for stm32l053xx, stm32l063xx, stm32l073xx, stm32l083xx devices.</big></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.6.0
-/ 15-April-2016</span></h3>
-<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-<ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-Pos and Msk macros within the CMSIS files.&nbsp;<br>
-</big></li><ul><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">For
-example, on the previous CMSIS version (V1.5.0), the constant
-ADC_IER_EOCALIE was defined as follow :<br>
-#define ADC_IER_EOCALIE &nbsp; &nbsp; &nbsp; &nbsp;
-&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
-((uint32_t)0x00000800U)<br>
-</span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">&nbsp;</span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">On
-this new CMSIS version (V1.6.0), the constant ADC_IER_EOCALIE is now
-defined as follow :<br>
-#define ADC_IER_EOCALIE_Pos &nbsp; &nbsp; &nbsp; &nbsp;
-&nbsp; &nbsp; &nbsp; (11U)<br>
-#define ADC_IER_EOCALIE_Msk &nbsp; &nbsp; &nbsp; &nbsp;
-&nbsp; &nbsp; &nbsp;(0x1U &lt;&lt;
-ADC_IER_EOCALIE_Pos)&nbsp; <br>
-#define ADC_IER_EOCALIE &nbsp; &nbsp; &nbsp; &nbsp;
-&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
-&nbsp;ADC_IER_EOCALIE_Msk <br>
-</span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><span style="font-weight: bold;"></span>The same rule
-applies on all the other constants present inside the CMSIS files.<br>
-&nbsp; &nbsp;<span style="font-weight: bold;"></span></span><br>
-</li></ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">MISRA
-C 2004&nbsp;rule 10.6 compliancy. (A 'U' suffix shall be applied to
-all constants of unisgned type)</big><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">.<br><br>
-</big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Several SYSCFG definition changes :<br>- SYSCFG_CFGR3_EN_VREFINT
-enable bit suppressed. (no more needed and must not be used).&nbsp;<br></big><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">- SYSCFG_CFGR3_EN_BGAP
-define suppressed.<br>- SYSCFG_CFGR3_REF_HSI48_RDYF,
-SYSCFG_CFGR3_SENSOR_ADC_RDYF, SYSCFG_CFGR3_VREFINT_ADC_RDYF,
-SYSCFG_CFGR3_VREFINT_COMP_RDYF flags suppressed,
-SYSCFG_CFGR3_VREFINT_RDYF must
-be used instead (this flag is a combination of the 4 suppressed flags).<br>- Added
-SYSCFG_CFGR3_REF_RC48MHz_RDYF, SYSCFG_CFGR3_REF_HSI48_RDYF,
-SYSCFG_VREFINT_ADC_RDYF, SYSCFG_CFGR3_SENSOR_ADC_RDYF,
-SYSCFG_CFGR3_VREFINT_ADC_RDYF and SYSCFG_CFGR3_VREFINT_COMP_RDYF&nbsp;defines.<o:p></o:p></big>
-
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">
-</big></big></big></li><li><big style="color: windowtext; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">Aligned register namings</big><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"> with the different L0 Reference Manual </big></big></big><big style="color: windowtext; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">(</big><big style="color: windowtext; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">For STM32L0x1 : RM0377 Rev5, for </big><big style="color: windowtext; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">STM32L0x2 : </big><big style="color: windowtext; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">RM0367 Rev2, for </big><big style="color: windowtext; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;">STM32L0x3 : RM0367 Rev4</big><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">)</span><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">.<br>The list of
-the modification is listed hereafter :<br>
-<br>
-</big></big></big></li><ul><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Introduced
-new masks in EXTI bit definitions in order to simplify LL source
-code.&nbsp;</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renamed
-RCC_CFGR_MCO_x into RCC_CFGR_MCOSEL_x</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added
- FLASHSIZE_BASE, UID_BASE and SRAM_SIZE_MAX defines.</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renamed macro IS_DMA_ALL_INSTANCE() to 
-IS_DMA_STREAM_ALL_INSTANCE().</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added
- new macros: IS_I2C_WAKEUP_FROMSTOP_INSTANCE(), IS_ADC_COMMON_INSTANCE() and IS_LPUART_INSTANCE().</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added
- new defines PWR_PVD_SUPPORT to handle the PVD feature.</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Corrected
-the value of FLASH_END for STM32L011xx or STM32L021xx devices.</big></big></span></li></ul></ul>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.5.0
-/ 8-January-2016</span></h3><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-</big>
-</big><ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">MISRA
-C 2004 rule 5.1 and rule 10.6 compliancy.<br>
-</big></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Several
-renaming in order to be aligned with the Reference Manual.The list of
-the modification is listed hereafter :<br>
-<br>
-</big></big></big></li><ul><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new COMP_Common_TypeDef structure.</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Removal
-of the RCR field inside the TIM_TypeDef structure.</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new define COMP12_COMMON</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new define DAC1 (same as DAC)</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new define ADC1_COMMON</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new define ADC_CHSELR_CHSEL</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new define COMP_CSR_WINMODE</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of a new define DAC_CHANNEL2_SUPPORT</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renaming
-of EXTI_RTSR_TRx into EXTI_RTSR_RTx with x = {0,..22}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renaming
-of EXTI_FTSR_TRx into EXTI_FTSR_FTx with </big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">x
-= {0,..22}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renaming
-of EXTI_SWIER_SWIERx into EXTI_SWIER_SWIx </big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">with
-</big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">x
-= {0,..22}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renaming
-of EXTI_PR_PRx into EXTI_PR_PIFx </big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">with
-</big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">x
-= {0,..22}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renaming
-of RCC_IOPRSTR_GPIOxRST into RCC_IOPRSTR_IOPxRST with x = {A,B,C,D,E,H}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-a new define RCC_AHBRSTR_DMA1RST</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-a new define RCC_APB2RSTR_ADC1RST</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-a new define RCC_APB2RSTR_DBGMCURST</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renaming
-of&nbsp;</big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">RCC_IOPENR_GPIOxEN
-into </big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">RCC_IOPENR_IOPxEN&nbsp;</big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">with
-x = </big></big></span><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">{A,B,C,D,E,H}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-a new define RCC_AHBENR_DMA1EN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-RCC_APB2ENR_MIFIEN into RCC_APB2ENR_FWEN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-RCC_APB2ENR_ADC1EN into RCC_APB2ENR_ADCEN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-RCC_APB2ENR_DBGMCUEN into RCC_APB2ENR_DBGEN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-RCC_IOPSMENR_GPIOxSMEN into RCC_IOPSMENR_IOPxSMEN with x = {A,B,C,D,E,H}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-a new define RCC_AHBSMENR_DMA1SMEN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-RCC_APB2SMENR_ADC1SMEN into RCC_APB2SMENR_ADCSMEN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-RCC_APB2SMENR_DBGMCUSMEN into RCC_APB2SMENR_DBGSMEN</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-new defines TIM_TIM2_REMAP_HSI_SUPPORT and TIM_TIM2_REMAP_HSI48_SUPPORT</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Remove
-the following defines :&nbsp; TIM_CR2_CCPC, TIM_CR2_CCUS,
-&nbsp;TIM_CR2_OIS1, TIM_CR2_OIS1N, TIM_CR2_OIS2,TIM_CR2_OIS2N,
-TIM_CR2_OIS3, TIM_CR2_OIS3N, TIM_CR2_OIS4</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Remove
-TIM_SR_COMIF and TIM_SR_BIF</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Remove&nbsp;TIM_EGR_COMG
-and TIM_EGR_BG</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Remove
-TIM_CCER_CC1NE, TIM_CCER_CC2NE and TIM_CCER_CC3NE</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Remove
-TIM_RCR_REP</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-USART_ISR_LBD into USART_ISR_LBDF</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-WWDG_CR_Tx into WWDG_CR_T_x with x = {0,..6}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-WWDG_CFR_WDGTBx into WWDG_CFR_WDGTB_x with x = {0,1}</big></big></span></li><li><span style="color: black; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; font-size: 10pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-several macros to check Timer instances (For exemple
-IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(),IS_TIM_CLOCK_DIVISION_INSTANCE(),
-etc..)<br>
-</big></big></span></li></ul></ul>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">V1.4.0
-/ 16-October-2015</big></big></span></h3>
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-</big>
-</big><ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Update
-all the files to support&nbsp;STM32L011xx and STM32L021xx.</big></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Remove
-the Debug Monitor handler from the startup files (not supported on L0).</big></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Renamings
-and usage of some aliases in order to be compliant with the RefManuals.<br>
-</big></big></big></li></ul>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">V1.3.0
-/ 9-Sept-2015</big></big></span></h3>
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<br>
-</span></u></b>
-</big>
-</big><ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Update
-all the files to support&nbsp;STM32L031xx and STM32L041xx.</big></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Several
-renamings in order to be compliant with the specifications.<br>
-</big></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Adding
-of&nbsp;new bit definitions (COMP_CSR_COMP2LPTIM1IN1,
-SYSCFG_CFGR1_UFB, I2C_OAR2_x, LCD_CR_MUX_SEG, RTC_BKP_NUMBER)</big></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Update
-of several registers and structures&nbsp;(CRC_TypeDef, TIM_TypeDef)<br>
-</big></big></big></li></ul>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">V1.2.0
-/&nbsp;6-February-2015</big></big></span></h3>
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><br>
-<br>
-</span></u></b>
-</big>
-</big><ul><li style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added
-the set of CMSIS files for the STM32L07xx and STM32L08xx family and the
-set of startup files for IAR/Keil/Atollic IDEs<span style="font-size: 10pt; color: windowtext;"></span></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><small><small><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-IAR set of fil<span style="font-family: Verdana;">es S</span>TM32L073xx
-- STM32L072xx - STM32L071xx - STM32L083xx - STM32L082xx - STM32L081xx</span></small></small></big></big></li></ul>
-<ul><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><small><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added
-MDK-ARM startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</span></small></big></big></li><li><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><small><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Added
-Atollic startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</span></small></big></big></li></ul>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">V1.1.0
-/ 18-June-2014</big></big></span></h3>
-<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<o:p></o:p></span></u></b></big></big></p>
-<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Header
-files<br>
-</big></big></span></p>
-</li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-defines for memories
-base and end addresses: <span style="font-style: italic;">FLASH_END</span>,&nbsp;<span style="font-style: italic;">DATA_EEPROM_BASE</span>
-and&nbsp;<span style="font-style: italic;">DATA_EEPROM_END</span>
-(instead of &nbsp;having them in stm32l0xx_hal_flash.h
-file)</big></big></span><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><br>
-<span style="font-size: 10pt; line-height: 115%; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"></span></big></big></li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; line-height: 115%; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Peripheral
-register structures definition is aligned on 32 bit<br>
-</big></big></span></li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><span style="font-style: italic;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">FLASH_SR_FWWER</big></big></span>
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">value
-fixed to 0x00020000 instead of 0x00010000</big></big></span></p>
-</li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Add
-missing EXTI register bits definition<br>
-</big></big></span></p>
-</li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">IMR
-and EMR registers: bits 18, 20, 26, 28, 29</big></big></span></li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">FTSR,
-RTSR, PR and SWIER registers: bits 20, 21, 22</big></big></span></li></ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Update
-some bits definition to be in line with latest version of the Reference
-Manual</big></big></span></p>
-</li></ul><ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-<span style="font-style: italic;">FLASH_SR_ENHV</span>
-into <span style="font-style: italic;">FLASH_SR_ENDHV</span></big></big></span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">
-<big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><br>
-</big></big></span></p>
-</li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-<span style="font-style: italic;">SYSCFG_VREFINT_ADC_RDYF</span>
-into <span style="font-style: italic;">SYSCFG_CFGR3_VREFINT_ADC_RDYF</span><br>
-</big></big></span></p>
-</li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-<span style="font-style: italic;">ADC_SMPR_SMPR</span>_xxx
-into <span style="font-style: italic;">ADC_SMPR_SMP_xxx</span></big></big></span></p>
-</li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Rename
-<span style="font-style: italic;">SYSCFG_CFGR3_VREFINT_ADC_RDYF</span>
-into <span style="font-style: italic;">SYSCFG_VREFINT_ADC_RDYF</span></big></big></span></li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; line-height: 115%; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Note:
-aliases has been added to keep compatibility with previous version</big></big></span></li></ul></ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; line-height: 115%; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">system_stm32l0xx.c</big></big></span></p>
-</li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;">
-<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; line-height: 115%; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Use
-&#8220;__IO const&#8221; instead of
-&#8220;__I&#8221;, to avoid any compilation issue when __cplusplus switch is defined</big></big></span></p>
-</li></ul></ul>
-<span style="font-size: 10pt; font-family: Verdana;"></span>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">V1.0.1
-/ 24-April-2014</big></big></span></h3>
-<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<o:p></o:p></span></u></b></big></big></p>
-<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: Verdana;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">Update
-gcc
-startup files.</big></big></span></li></ul>
-<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">V1.0.0
-/ 22-April-2014</big></big></span></h3>
-<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<o:p></o:p></span></u></b></big></big></p>
-<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: Verdana;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;"><big style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: windowtext;">First
-official release.</big></big></span></li></ul><br>
-</div>
-<div id="product_doc" class="topic1">
-<hr>
-<p style="text-align: center;">For complete
-documentation on STM32 Microcontrollers<span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"></span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><span style="color: black;"></span></span>,
-visit:&nbsp;<a href="http://www.st.com/STM32" target="_blank">www.st.com/STM32</a></p>
-<br>
+<!DOCTYPE html>
+<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
+<head>
+  <meta charset="utf-8" />
+  <meta name="generator" content="pandoc" />
+  <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
+  <title>Release Notes for STM32L0xx CMSIS</title>
+  <style type="text/css">
+      code{white-space: pre-wrap;}
+      span.smallcaps{font-variant: small-caps;}
+      span.underline{text-decoration: underline;}
+      div.column{display: inline-block; vertical-align: top; width: 50%;}
+  </style>
+  <link rel="stylesheet" href="_htmresc/mini-st.css" />
+  <!--[if lt IE 9]>
+    <script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
+  <![endif]-->
+</head>
+<body>
+<div class="row">
+<div class="col-sm-12 col-lg-4">
+<div class="card fluid">
+<div class="sectione dark">
+<center>
+<h1 id="release-notes-for-stm32l0xx-cmsis"><small>Release Notes for</small> <mark>STM32L0xx CMSIS</mark></h1>
+<p>Copyright © 2009-2018 ARM Limited - STMicroelectronics<br />
+</p>
+<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a>
+</center>
 </div>
 </div>
-</body></html>
\ No newline at end of file
+<h1 id="license">License</h1>
+<p>Licensed by ST under Apache-2.0 license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:</p>
+<p><a href="../../../LICENSE.txt">Apache License v2.0</a></p>
+<h1 id="purpose">Purpose</h1>
+<p>This driver provides the CMSIS device for the stm32l1xx products. This covers:</p>
+<ul>
+<li>STM32L010xx devices</li>
+<li>STM32L011xx and STM32L021xx devices</li>
+<li>STM32L031xx and STM32L041xx devices</li>
+<li>STM32L051xx, STM32L052xx, STM32L053xx, STM32L062xx and STM32L063xx devices</li>
+<li>STM32L071xx, STM32L072xx, STM32L073xx, STM32L082xx and STM32L083xx devices</li>
+</ul>
+<p>This driver is composed of the descriptions of the registers under “Include” directory.</p>
+<p>Various template file are provided to easily build an application. They can be adapted to fit applications requirements.</p>
+<ul>
+<li>Templates/system_stm32l0xx.c contains the initialization code referred as SystemInit.</li>
+<li>Startup files are provided as example for IAR©, KEIL© and SW4STM32©.</li>
+<li>Linker files are provided as example for IAR©, KEIL© and SW4STM32©.</li>
+</ul>
+</div>
+<div class="col-sm-12 col-lg-8">
+<h1 id="update-history">Update History</h1>
+<div class="collapse">
+<input type="checkbox" id="collapse-section14" aria-hidden="true"> <label for="collapse-section14" aria-hidden="true">V1.9.1 / 28-October-2020</label>
+<div>
+<h2 id="main-changes">Main Changes</h2>
+<h3 id="maintenance-release">Maintenance release</h3>
+<h2 id="contents">Contents</h2>
+<ul>
+<li>system_stm32l0xx.c
+<ul>
+<li>SystemInit(): update to don’t reset RCC registers to its reset values.</li>
+<li>Protect Vector table modification following SRAM or FLASH preprocessor directive by a generic preprocessor directive: USER_VECT_TAB_ADDRESS.</li>
+</ul></li>
+<li>All header files
+<ul>
+<li>Remove unused IS_TIM_SYNCHRO_INSTANCE() assert macro.</li>
+</ul></li>
+<li>Remove stm32l061xx.h header file.</li>
+<li>Add License.md and Readme.md files required for GitHub publication</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true">V1.9.0 / 26-October-2018</label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<h3 id="maintenance-release-1">Maintenance release</h3>
+<h3 id="first-release-supporting-l0-value-lines">First release supporting L0 Value Lines</h3>
+<h2 id="contents-1">Contents</h2>
+<ul>
+<li>Add the support of STM32L010xx devices
+<ul>
+<li>Add stm32l010xb.h, stm32l010x8.h, stm32l010x6.h and stm32l010x4.h device description files</li>
+<li>Add startup_stm32l010xb.s, startup_stm32l010x8.s, startup_stm32l010x6.s and startup_stm32l010x4.s startup files for EWARM, MDK-ARM and SW4STM32 toolchains</li>
+<li>Add EWARM associated linker files for execution from internal RAM or internal FLASH</li>
+</ul></li>
+<li>stm32l0xx.h
+<ul>
+<li>Add the following device defines:
+<ul>
+<li>“#define STM32L010xB” for all STM32L010xB devices</li>
+<li>“#define STM32L010x8” for all STM32L010x8 devices</li>
+<li>“#define STM32L010x6” for all STM32L010x6 devices</li>
+<li>“#define STM32L010x4” for all STM32L010x4 devices</li>
+</ul></li>
+<li>Align ErrorStatus typedef to common error handling.</li>
+</ul></li>
+<li>All stm32l0xxxx.h device description files.h
+<ul>
+<li>[MISRAC2012-Rule-10.6] Use ‘UL’ postfix for _Msk definitions and memory/peripheral base addresses</li>
+<li>Correct comments in the bit definition of RCC_AHBRST, RCC_APB2RSTR and RCC_APB1RSTR registers.</li>
+<li>Rename RTC_CR_BCK bit to RTC_CR_BKP to be aligned with reference manual.</li>
+<li>Add missing definition of IS_TSC_ALL_INSTANCE after TSC driver update.</li>
+<li>Add back the bit definition of SYSCFG_CFGR3_EN_VREFINT in SYSCFG_CFGR3 register.</li>
+<li>Rename GPIO_AFRL_AFRLx and GPIO_AFRL_AFRHx bit definitions (from GPIO_AFRL/AFRH registers) to GPIO_AFRL_AFSELx.</li>
+<li>Align IS_TIM_XXX_INSTANCE definitions with other series.</li>
+<li>Remove cast (uint8_t) in CRC_IDR_IDR definition.</li>
+<li>Add missing definition of IS_PCD_ALL_INSTANCE macro after USB driver update.</li>
+<li>Add definition of IS_UART_DRIVER_ENABLE_INSTANCE macro after UART driver update.</li>
+<li>Add compatibility definition of USART_ICR_NECF / USART_ICR_NCF with others series.</li>
+<li>Update IS_UART_INSTANCE macro definition.</li>
+<li>Add definition of IS_LPTIM_ENCODER_INTERFACE_INSTANCE macro after LPTIM driver update.</li>
+<li>Move definition of FLASH_BANK2_BASE start address to stm32l0xx_hal_flash.h to be dependant on Memory Size register.</li>
+<li>Update interrupt definition to use DMA1_Channel4_5_IRQn for STM32L011xx and STM32L021xx devices.</li>
+<li>Correct PWR_WAKEUP_PIN definitions for L011xx and L021xx devices.</li>
+</ul></li>
+<li>system_stm32l0xx.c
+<ul>
+<li>Update file to correct comments for VECT_TAB_OFFSET definition.</li>
+<li>Update default MSI_VALUE reset value set in SystemCoreClock.</li>
+<li>Update SystemCoreClockUpdate() function to check HSI16DIVF for HSI divided by 4.</li>
+</ul></li>
+<li>startup_stm32l0xxxx.s
+<ul>
+<li>Update startup files to use DMA1_Channel4_5_IRQn/IRQHandler for STM32L011xx and STM32L01xx devices.</li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V1.8.0 / 12-January-2018</label>
+<div>
+<h2 id="main-changes-2">Main Changes</h2>
+<h3 id="internal-release">Internal release</h3>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true">V1.7.2 / 25-August-2017</label>
+<div>
+<h2 id="main-changes-3">Main Changes</h2>
+<h3 id="maintenance-release-2">Maintenance release</h3>
+<h2 id="contents-2">Contents</h2>
+<ul>
+<li>Removed DATE and VERSION fields from header files.</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true">V1.7.1 / 25-November-2016</label>
+<div>
+<h2 id="main-changes-4">Main Changes</h2>
+<h3 id="maintenance-release-3">Maintenance release</h3>
+<h2 id="contents-3">Contents</h2>
+<ul>
+<li>Updated IS_COMP_COMMON_INSTANCE() macro.</li>
+<li>Corrected ADC_CFGR2_TOVS bit and mask definitions.</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">V1.7.0 / 31-May-2016</label>
+<div>
+<h2 id="main-changes-5">Main Changes</h2>
+<h3 id="maintenance-release-4">Maintenance release</h3>
+<h2 id="contents-4">Contents</h2>
+<ul>
+<li>Added Pos and Msk macros missing within the CMSIS stm32l083xx.h file.</li>
+<li>Added LCD_CR_BUFEN bit definition in LCD CR register for stm32l053xx, stm32l063xx, stm32l073xx, stm32l083xx devices.</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">V1.6.0 / 15-April-2016</label>
+<div>
+<h2 id="main-changes-6">Main Changes</h2>
+<h3 id="maintenance-release-5">Maintenance release</h3>
+<h2 id="contents-5">Contents</h2>
+<ul>
+<li>Add Pos and Msk macros within the CMSIS files.
+<ul>
+<li>For example, on the previous CMSIS version (V1.5.0), the constant ADC_IER_EOCALIE was defined as follow :
+<ul>
+<li>#define ADC_IER_EOCALIE ((uint32_t)0x00000800U)</li>
+</ul></li>
+<li>On this new CMSIS version (V1.6.0), the constant ADC_IER_EOCALIE is now defined as follow :
+<ul>
+<li>#define ADC_IER_EOCALIE_Pos (11U)</li>
+<li>#define ADC_IER_EOCALIE_Msk (0x1U &lt;&lt; ADC_IER_EOCALIE_Pos)</li>
+<li>#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk</li>
+</ul></li>
+<li>The same rule applies on all the other constants present inside the CMSIS files.</li>
+</ul></li>
+<li><p>MISRA C 2004 rule 10.6 compliancy. (A ‘U’ suffix shall be applied to all constants of unisgned type).</p></li>
+<li>Several SYSCFG definition changes :</li>
+<li>SYSCFG_CFGR3_EN_VREFINT enable bit suppressed. (no more needed and must not be used).</li>
+<li>SYSCFG_CFGR3_EN_BGAP define suppressed.</li>
+<li>SYSCFG_CFGR3_REF_HSI48_RDYF, SYSCFG_CFGR3_SENSOR_ADC_RDYF, SYSCFG_CFGR3_VREFINT_ADC_RDYF, SYSCFG_CFGR3_VREFINT_COMP_RDYF flags suppressed, SYSCFG_CFGR3_VREFINT_RDYF must be used instead (this flag is a combination of the 4 suppressed flags).</li>
+<li><p>Added SYSCFG_CFGR3_REF_RC48MHz_RDYF, SYSCFG_CFGR3_REF_HSI48_RDYF, SYSCFG_VREFINT_ADC_RDYF, SYSCFG_CFGR3_SENSOR_ADC_RDYF, SYSCFG_CFGR3_VREFINT_ADC_RDYF and SYSCFG_CFGR3_VREFINT_COMP_RDYF defines.</p></li>
+<li>Aligned register namings with the different L0 Reference Manual (For STM32L0x1 : RM0377 Rev5, for STM32L0x2 : RM0367 Rev2, for STM32L0x3 : RM0367 Rev4). The list of the modification is listed hereafter :
+<ul>
+<li>Introduced new masks in EXTI bit definitions in order to simplify LL source code.</li>
+<li>Renamed RCC_CFGR_MCO_x into RCC_CFGR_MCOSEL_x</li>
+<li>Added FLASHSIZE_BASE, UID_BASE and SRAM_SIZE_MAX defines.</li>
+<li>Renamed macro IS_DMA_ALL_INSTANCE() to IS_DMA_STREAM_ALL_INSTANCE().</li>
+<li>Added new macros: IS_I2C_WAKEUP_FROMSTOP_INSTANCE(), IS_ADC_COMMON_INSTANCE() and IS_LPUART_INSTANCE().</li>
+<li>Added new defines PWR_PVD_SUPPORT to handle the PVD feature.</li>
+<li>Corrected the value of FLASH_END for STM32L011xx or STM32L021xx devices.</li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">V1.5.0 / 8-January-2016</label>
+<div>
+<h2 id="main-changes-7">Main Changes</h2>
+<h3 id="maintenance-release-6">Maintenance release</h3>
+<h2 id="contents-6">Contents</h2>
+<ul>
+<li>MISRA C 2004 rule 5.1 and rule 10.6 compliancy.</li>
+<li>Several renaming in order to be aligned with the Reference Manual.The list of the modification is listed hereafter :
+<ul>
+<li>Adding of a new COMP_Common_TypeDef structure.</li>
+<li>Removal of the RCR field inside the TIM_TypeDef structure.</li>
+<li>Adding of a new define COMP12_COMMON</li>
+<li>Adding of a new define DAC1 (same as DAC)</li>
+<li>Adding of a new define ADC1_COMMON</li>
+<li>Adding of a new define ADC_CHSELR_CHSEL</li>
+<li>Adding of a new define COMP_CSR_WINMODE</li>
+<li>Adding of a new define DAC_CHANNEL2_SUPPORT</li>
+<li>Renaming of EXTI_RTSR_TRx into EXTI_RTSR_RTx with x = {0,..22}</li>
+<li>Renaming of EXTI_FTSR_TRx into EXTI_FTSR_FTx with x = {0,..22}</li>
+<li>Renaming of EXTI_SWIER_SWIERx into EXTI_SWIER_SWIx with x = {0,..22}</li>
+<li>Renaming of EXTI_PR_PRx into EXTI_PR_PIFx with x = {0,..22}</li>
+<li>Renaming of RCC_IOPRSTR_GPIOxRST into RCC_IOPRSTR_IOPxRST with x = {A,B,C,D,E,H}</li>
+<li>Add a new define RCC_AHBRSTR_DMA1RST</li>
+<li>Add a new define RCC_APB2RSTR_ADC1RST</li>
+<li>Add a new define RCC_APB2RSTR_DBGMCURST</li>
+<li>Renaming of RCC_IOPENR_GPIOxEN into RCC_IOPENR_IOPxEN with x = {A,B,C,D,E,H}</li>
+<li>Add a new define RCC_AHBENR_DMA1EN</li>
+<li>Rename RCC_APB2ENR_MIFIEN into RCC_APB2ENR_FWEN</li>
+<li>Rename RCC_APB2ENR_ADC1EN into RCC_APB2ENR_ADCEN</li>
+<li>Rename RCC_APB2ENR_DBGMCUEN into RCC_APB2ENR_DBGEN</li>
+<li>Rename RCC_IOPSMENR_GPIOxSMEN into RCC_IOPSMENR_IOPxSMEN with x = {A,B,C,D,E,H}</li>
+<li>Add a new define RCC_AHBSMENR_DMA1SMEN</li>
+<li>Rename RCC_APB2SMENR_ADC1SMEN into RCC_APB2SMENR_ADCSMEN</li>
+<li>Rename RCC_APB2SMENR_DBGMCUSMEN into RCC_APB2SMENR_DBGSMEN</li>
+<li>Add new defines TIM_TIM2_REMAP_HSI_SUPPORT and TIM_TIM2_REMAP_HSI48_SUPPORT</li>
+<li>Remove the following defines : TIM_CR2_CCPC, TIM_CR2_CCUS, TIM_CR2_OIS1, TIM_CR2_OIS1N, TIM_CR2_OIS2,TIM_CR2_OIS2N, TIM_CR2_OIS3, TIM_CR2_OIS3N, TIM_CR2_OIS4</li>
+<li>Remove TIM_SR_COMIF and TIM_SR_BIF</li>
+<li>Remove TIM_EGR_COMG and TIM_EGR_BG</li>
+<li>Remove TIM_CCER_CC1NE, TIM_CCER_CC2NE and TIM_CCER_CC3NE</li>
+<li>Remove TIM_RCR_REP</li>
+<li>Rename USART_ISR_LBD into USART_ISR_LBDF</li>
+<li>Rename WWDG_CR_Tx into WWDG_CR_T_x with x = {0,..6}</li>
+<li>Rename WWDG_CFR_WDGTBx into WWDG_CFR_WDGTB_x with x = {0,1}</li>
+<li>Add several macros to check Timer instances (IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(), IS_TIM_CLOCK_DIVISION_INSTANCE(), …)</li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.4.0 / 16-October-2015</label>
+<div>
+<h2 id="main-changes-8">Main Changes</h2>
+<h3 id="maintenance-release-7">Maintenance release</h3>
+<ul>
+<li>Update all the files to support STM32L011xx and STM32L021xx.</li>
+</ul>
+<h2 id="contents-7">Contents</h2>
+<ul>
+<li>Remove the Debug Monitor handler from the startup files (not supported on L0).</li>
+<li>Renamings and usage of some aliases in order to be compliant with the RefManuals.</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.3.0 / 9-Sept-2015</label>
+<div>
+<h2 id="main-changes-9">Main Changes</h2>
+<h3 id="maintenance-release-8">Maintenance release</h3>
+<ul>
+<li>Update all the files to support <strong>STM32L031xx</strong> and <strong>STM32L041xx</strong>.</li>
+</ul>
+<h2 id="contents-8">Contents</h2>
+<ul>
+<li>Several renamings in order to be compliant with the specifications.</li>
+<li>Adding of new bit definitions (COMP_CSR_COMP2LPTIM1IN1, SYSCFG_CFGR1_UFB, I2C_OAR2_x, LCD_CR_MUX_SEG, RTC_BKP_NUMBER)</li>
+<li>Update of several registers and structures (CRC_TypeDef, TIM_TypeDef)</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">V1.2.0 / 6-February-2015</label>
+<div>
+<h2 id="main-changes-10">Main Changes</h2>
+<h3 id="maintenance-release-9">Maintenance release</h3>
+<ul>
+<li>Added the set of CMSIS files for the <strong>STM32L07xx</strong> and <strong>STM32L08xx</strong> family</li>
+</ul>
+<h2 id="contents-9">Contents</h2>
+<ul>
+<li>Add IAR set of files STM32L073xx - STM32L072xx - STM32L071xx - STM32L083xx - STM32L082xx - STM32L081xx</li>
+<li>Added MDK-ARM startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</li>
+<li>Added Atollic startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.1.0 / 18-June-2014</label>
+<div>
+<h2 id="main-changes-11">Main Changes</h2>
+<h3 id="maintenance-release-10">Maintenance release</h3>
+<h2 id="contents-10">Contents</h2>
+<ul>
+<li><strong>Header files</strong>
+<ul>
+<li>Add defines for memories base and end addresses:
+<ul>
+<li>FLASH_END, DATA_EEPROM_BASE and DATA_EEPROM_END (instead of having them in stm32l0xx_hal_flash.h file)</li>
+</ul></li>
+<li>Peripheral register structures definition is aligned on 32 bit</li>
+<li>FLASH_SR_FWWER value fixed to 0x00020000 instead of 0x00010000</li>
+<li>Add missing EXTI register bits definition
+<ul>
+<li>IMR and EMR registers: bits 18, 20, 26, 28, 29</li>
+<li>FTSR, RTSR, PR and SWIER registers: bits 20, 21, 22</li>
+</ul></li>
+<li>Update some bits definition to be in line with latest version of the Reference Manual
+<ul>
+<li>Rename FLASH_SR_ENHV into FLASH_SR_ENDHV</li>
+<li>Rename SYSCFG_VREFINT_ADC_RDYF into SYSCFG_CFGR3_VREFINT_ADC_RDYF</li>
+<li>Rename ADC_SMPR_SMPR_xxx into ADC_SMPR_SMP_xxx</li>
+<li>Rename SYSCFG_CFGR3_VREFINT_ADC_RDYF into SYSCFG_VREFINT_ADC_RDYF Note: aliases has been added to keep compatibility with previous version</li>
+</ul></li>
+</ul></li>
+<li><strong>system_stm32l0xx.c</strong>
+<ul>
+<li>Use "__IO const" instead of "__I", to avoid any compilation issue when __cplusplus switch is defined</li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.0.1 / 24-April-2014</label>
+<div>
+<h2 id="main-changes-12">Main Changes</h2>
+<h3 id="first-official-release">First official release</h3>
+<h2 id="contents-11">Contents</h2>
+<ul>
+<li>Update gcc startup files</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 22-April-2014</label>
+<div>
+<h2 id="main-changes-13">Main Changes</h2>
+<h3 id="first-official-release-1">First official release</h3>
+</div>
+</div>
+</div>
+</div>
+<footer class="sticky">
+For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <a href="http://www.st.com/STM32">http://www.st.com/STM32</a>
+</footer>
+</body>
+</html>
diff --git a/Source/Templates/arm/startup_stm32l010x4.s b/Source/Templates/arm/startup_stm32l010x4.s
index 7616103..1045ba4 100644
--- a/Source/Templates/arm/startup_stm32l010x4.s
+++ b/Source/Templates/arm/startup_stm32l010x4.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l010x4.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l010x4 Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l010x6.s b/Source/Templates/arm/startup_stm32l010x6.s
index 4885dee..18c1cd4 100644
--- a/Source/Templates/arm/startup_stm32l010x6.s
+++ b/Source/Templates/arm/startup_stm32l010x6.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l010x6.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l010x6 Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l010x8.s b/Source/Templates/arm/startup_stm32l010x8.s
index ef0b741..a905357 100644
--- a/Source/Templates/arm/startup_stm32l010x8.s
+++ b/Source/Templates/arm/startup_stm32l010x8.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l010x8.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l010x8 Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l010xb.s b/Source/Templates/arm/startup_stm32l010xb.s
index 3ec803c..2dd2bd9 100644
--- a/Source/Templates/arm/startup_stm32l010xb.s
+++ b/Source/Templates/arm/startup_stm32l010xb.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l010xb.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l010xB Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l011xx.s b/Source/Templates/arm/startup_stm32l011xx.s
index 0b2a6cb..fadd9f5 100644
--- a/Source/Templates/arm/startup_stm32l011xx.s
+++ b/Source/Templates/arm/startup_stm32l011xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l011xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l011xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l021xx.s b/Source/Templates/arm/startup_stm32l021xx.s
index fe90ca0..2af109a 100644
--- a/Source/Templates/arm/startup_stm32l021xx.s
+++ b/Source/Templates/arm/startup_stm32l021xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l021xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l021xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l031xx.s b/Source/Templates/arm/startup_stm32l031xx.s
index fdbaf5c..fa81906 100644
--- a/Source/Templates/arm/startup_stm32l031xx.s
+++ b/Source/Templates/arm/startup_stm32l031xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l031xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l031xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l041xx.s b/Source/Templates/arm/startup_stm32l041xx.s
index afa0b6d..70bf5d5 100644
--- a/Source/Templates/arm/startup_stm32l041xx.s
+++ b/Source/Templates/arm/startup_stm32l041xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l041xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l041xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l051xx.s b/Source/Templates/arm/startup_stm32l051xx.s
index f88c941..f84eeea 100644
--- a/Source/Templates/arm/startup_stm32l051xx.s
+++ b/Source/Templates/arm/startup_stm32l051xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l051xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l051xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l052xx.s b/Source/Templates/arm/startup_stm32l052xx.s
index 8781d5c..06c1775 100644
--- a/Source/Templates/arm/startup_stm32l052xx.s
+++ b/Source/Templates/arm/startup_stm32l052xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l052xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l052xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l053xx.s b/Source/Templates/arm/startup_stm32l053xx.s
index 8fcc356..fa9f6fd 100644
--- a/Source/Templates/arm/startup_stm32l053xx.s
+++ b/Source/Templates/arm/startup_stm32l053xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l053xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l053xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l061xx.s b/Source/Templates/arm/startup_stm32l061xx.s
deleted file mode 100644
index 95082e1..0000000
--- a/Source/Templates/arm/startup_stm32l061xx.s
+++ /dev/null
@@ -1,253 +0,0 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
-;* File Name          : startup_stm32l061xx.s
-;* Author             : MCD Application Team
-;* Description        : STM32l061xx Devices vector table for MDK-ARM toolchain.
-;*                      This module performs:
-;*                      - Set the initial SP
-;*                      - Set the initial PC == Reset_Handler
-;*                      - Set the vector table entries with the exceptions ISR address
-;*                      - Branches to __main in the C library (which eventually
-;*                        calls main()).
-;*                      After Reset the Cortex-M0+ processor is in Thread mode,
-;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
-;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;*
-;*******************************************************************************
-;
-; Amount of memory (in bytes) allocated for Stack
-; Tailor this value to your application needs
-; <h> Stack Configuration
-;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
-; </h>
-
-Stack_Size      EQU     0x00000400
-
-                AREA    STACK, NOINIT, READWRITE, ALIGN=3
-Stack_Mem       SPACE   Stack_Size
-__initial_sp
-
-
-; <h> Heap Configuration
-;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
-; </h>
-
-Heap_Size       EQU     0x00000200
-
-                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
-__heap_base
-Heap_Mem        SPACE   Heap_Size
-__heap_limit
-
-                PRESERVE8
-                THUMB
-
-
-; Vector Table Mapped to Address 0 at Reset
-                AREA    RESET, DATA, READONLY
-                EXPORT  __Vectors
-                EXPORT  __Vectors_End
-                EXPORT  __Vectors_Size
-
-__Vectors       DCD     __initial_sp              ; Top of Stack
-                DCD     Reset_Handler             ; Reset Handler
-                DCD     NMI_Handler               ; NMI Handler
-                DCD     HardFault_Handler         ; Hard Fault Handler
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     SVC_Handler               ; SVCall Handler
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     PendSV_Handler            ; PendSV Handler
-                DCD     SysTick_Handler           ; SysTick Handler
-
-                ; External Interrupts
-                DCD     WWDG_IRQHandler                ; Window Watchdog
-                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
-                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
-                DCD     FLASH_IRQHandler               ; FLASH
-                DCD     RCC_IRQHandler                 ; RCC
-                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
-                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
-                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
-                DCD     0                              ; Reserved
-                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
-                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
-                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
-                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
-                DCD     LPTIM1_IRQHandler              ; LPTIM1
-                DCD     0                              ; Reserved
-                DCD     TIM2_IRQHandler                ; TIM2
-                DCD     0                              ; Reserved
-                DCD     TIM6_IRQHandler                ; TIM6
-                DCD     0                              ; Reserved
-                DCD     0                              ; Reserved
-                DCD     TIM21_IRQHandler               ; TIM21
-                DCD     0                              ; Reserved
-                DCD     TIM22_IRQHandler               ; TIM22
-                DCD     I2C1_IRQHandler                ; I2C1
-                DCD     I2C2_IRQHandler                ; I2C2
-                DCD     SPI1_IRQHandler                ; SPI1
-                DCD     SPI2_IRQHandler                ; SPI2
-                DCD     USART1_IRQHandler              ; USART1
-                DCD     USART2_IRQHandler              ; USART2
-                DCD     AES_LPUART1_IRQHandler         ; AES and LPUART1
-                DCD     0                              ; Reserved
-                DCD     0                              ; Reserved
-                
-__Vectors_End
-
-__Vectors_Size  EQU  __Vectors_End - __Vectors
-
-                AREA    |.text|, CODE, READONLY
-
-; Reset handler routine
-Reset_Handler    PROC
-                 EXPORT  Reset_Handler                 [WEAK]
-        IMPORT  __main
-        IMPORT  SystemInit  
-                 LDR     R0, =SystemInit
-                 BLX     R0
-                 LDR     R0, =__main
-                 BX      R0
-                 ENDP
-
-; Dummy Exception Handlers (infinite loops which can be modified)
-
-NMI_Handler     PROC
-                EXPORT  NMI_Handler                    [WEAK]
-                B       .
-                ENDP
-HardFault_Handler\
-                PROC
-                EXPORT  HardFault_Handler              [WEAK]
-                B       .
-                ENDP
-SVC_Handler     PROC
-                EXPORT  SVC_Handler                    [WEAK]
-                B       .
-                ENDP
-PendSV_Handler  PROC
-                EXPORT  PendSV_Handler                 [WEAK]
-                B       .
-                ENDP
-SysTick_Handler PROC
-                EXPORT  SysTick_Handler                [WEAK]
-                B       .
-                ENDP
-
-Default_Handler PROC
-
-                EXPORT  WWDG_IRQHandler                [WEAK]
-                EXPORT  PVD_IRQHandler                 [WEAK]
-                EXPORT  RTC_IRQHandler                 [WEAK]
-                EXPORT  FLASH_IRQHandler               [WEAK]
-                EXPORT  RCC_IRQHandler             [WEAK]
-                EXPORT  EXTI0_1_IRQHandler             [WEAK]
-                EXPORT  EXTI2_3_IRQHandler             [WEAK]
-                EXPORT  EXTI4_15_IRQHandler            [WEAK]
-                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
-                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
-                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
-                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
-                EXPORT  LPTIM1_IRQHandler              [WEAK]
-                EXPORT  TIM2_IRQHandler                [WEAK]
-                EXPORT  TIM6_IRQHandler                [WEAK]
-                EXPORT  TIM21_IRQHandler               [WEAK]
-                EXPORT  TIM22_IRQHandler               [WEAK]
-                EXPORT  I2C1_IRQHandler                [WEAK]
-                EXPORT  I2C2_IRQHandler                [WEAK]
-                EXPORT  SPI1_IRQHandler                [WEAK]
-                EXPORT  SPI2_IRQHandler                [WEAK]
-                EXPORT  USART1_IRQHandler              [WEAK]
-                EXPORT  USART2_IRQHandler              [WEAK]
-                EXPORT  AES_LPUART1_IRQHandler         [WEAK]
-
-
-
-WWDG_IRQHandler
-PVD_IRQHandler
-RTC_IRQHandler
-FLASH_IRQHandler
-RCC_IRQHandler
-EXTI0_1_IRQHandler
-EXTI2_3_IRQHandler
-EXTI4_15_IRQHandler
-DMA1_Channel1_IRQHandler
-DMA1_Channel2_3_IRQHandler
-DMA1_Channel4_5_6_7_IRQHandler
-ADC1_COMP_IRQHandler 
-LPTIM1_IRQHandler
-TIM2_IRQHandler
-TIM6_IRQHandler
-TIM21_IRQHandler
-TIM22_IRQHandler
-I2C1_IRQHandler
-I2C2_IRQHandler
-SPI1_IRQHandler
-SPI2_IRQHandler
-USART1_IRQHandler
-USART2_IRQHandler
-AES_LPUART1_IRQHandler
-
-                B       .
-
-                ENDP
-
-                ALIGN
-
-;*******************************************************************************
-; User Stack and Heap initialization
-;*******************************************************************************
-                 IF      :DEF:__MICROLIB
-                
-                 EXPORT  __initial_sp
-                 EXPORT  __heap_base
-                 EXPORT  __heap_limit
-                
-                 ELSE
-                
-                 IMPORT  __use_two_region_memory
-                 EXPORT  __user_initial_stackheap
-                 
-__user_initial_stackheap
-
-                 LDR     R0, =  Heap_Mem
-                 LDR     R1, =(Stack_Mem + Stack_Size)
-                 LDR     R2, = (Heap_Mem +  Heap_Size)
-                 LDR     R3, = Stack_Mem
-                 BX      LR
-
-                 ALIGN
-
-                 ENDIF
-
-                 END
-
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/Source/Templates/arm/startup_stm32l062xx.s b/Source/Templates/arm/startup_stm32l062xx.s
index e836c9c..69c5210 100644
--- a/Source/Templates/arm/startup_stm32l062xx.s
+++ b/Source/Templates/arm/startup_stm32l062xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l062xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l062xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l063xx.s b/Source/Templates/arm/startup_stm32l063xx.s
index 2525133..724bc85 100644
--- a/Source/Templates/arm/startup_stm32l063xx.s
+++ b/Source/Templates/arm/startup_stm32l063xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l063xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l063xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l071xx.s b/Source/Templates/arm/startup_stm32l071xx.s
index 93be51c..64ef67b 100644
--- a/Source/Templates/arm/startup_stm32l071xx.s
+++ b/Source/Templates/arm/startup_stm32l071xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l071xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l071xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l072xx.s b/Source/Templates/arm/startup_stm32l072xx.s
index a52f4e9..ed130f0 100644
--- a/Source/Templates/arm/startup_stm32l072xx.s
+++ b/Source/Templates/arm/startup_stm32l072xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l072xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l072xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l073xx.s b/Source/Templates/arm/startup_stm32l073xx.s
index f1a401c..fa7c30c 100644
--- a/Source/Templates/arm/startup_stm32l073xx.s
+++ b/Source/Templates/arm/startup_stm32l073xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l073xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l073xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l081xx.s b/Source/Templates/arm/startup_stm32l081xx.s
index 3612472..6d34a49 100644
--- a/Source/Templates/arm/startup_stm32l081xx.s
+++ b/Source/Templates/arm/startup_stm32l081xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l081xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l081xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l082xx.s b/Source/Templates/arm/startup_stm32l082xx.s
index e91b549..4f7469e 100644
--- a/Source/Templates/arm/startup_stm32l082xx.s
+++ b/Source/Templates/arm/startup_stm32l082xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l082xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l082xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l083xx.s b/Source/Templates/arm/startup_stm32l083xx.s
index 06697e5..a50ee00 100644
--- a/Source/Templates/arm/startup_stm32l083xx.s
+++ b/Source/Templates/arm/startup_stm32l083xx.s
@@ -1,4 +1,4 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;******************************************************************************
 ;* File Name          : startup_stm32l083xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32l083xx Devices vector table for MDK-ARM toolchain.
@@ -10,32 +10,19 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;*******************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;*******************************************************************************
-;
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs
 ; <h> Stack Configuration
diff --git a/Source/Templates/gcc/startup_stm32l010x4.s b/Source/Templates/gcc/startup_stm32l010x4.s
index 5706c9e..66c8d7d 100644
--- a/Source/Templates/gcc/startup_stm32l010x4.s
+++ b/Source/Templates/gcc/startup_stm32l010x4.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -86,34 +73,35 @@
 
 ApplicationStart:
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l010x6.s b/Source/Templates/gcc/startup_stm32l010x6.s
index b274a9f..c851276 100644
--- a/Source/Templates/gcc/startup_stm32l010x6.s
+++ b/Source/Templates/gcc/startup_stm32l010x6.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -86,34 +73,35 @@
 
 ApplicationStart:
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l010x8.s b/Source/Templates/gcc/startup_stm32l010x8.s
index 4e44ca3..094bbea 100644
--- a/Source/Templates/gcc/startup_stm32l010x8.s
+++ b/Source/Templates/gcc/startup_stm32l010x8.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -86,34 +73,35 @@
 
 ApplicationStart:
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l010xb.s b/Source/Templates/gcc/startup_stm32l010xb.s
index 599ceb1..f2da778 100644
--- a/Source/Templates/gcc/startup_stm32l010xb.s
+++ b/Source/Templates/gcc/startup_stm32l010xb.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -86,34 +73,35 @@
 
 ApplicationStart:
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l011xx.s b/Source/Templates/gcc/startup_stm32l011xx.s
index e4708b0..17c4da7 100644
--- a/Source/Templates/gcc/startup_stm32l011xx.s
+++ b/Source/Templates/gcc/startup_stm32l011xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -86,34 +73,35 @@
 
 ApplicationStart:
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l021xx.s b/Source/Templates/gcc/startup_stm32l021xx.s
index dd80383..0ef0e74 100644
--- a/Source/Templates/gcc/startup_stm32l021xx.s
+++ b/Source/Templates/gcc/startup_stm32l021xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -86,34 +73,35 @@
 
 ApplicationStart:
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l031xx.s b/Source/Templates/gcc/startup_stm32l031xx.s
index 249fb41..e2fc165 100644
--- a/Source/Templates/gcc/startup_stm32l031xx.s
+++ b/Source/Templates/gcc/startup_stm32l031xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l041xx.s b/Source/Templates/gcc/startup_stm32l041xx.s
index 7dfeedd..79fb5e1 100644
--- a/Source/Templates/gcc/startup_stm32l041xx.s
+++ b/Source/Templates/gcc/startup_stm32l041xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l051xx.s b/Source/Templates/gcc/startup_stm32l051xx.s
index f10ef9d..c663b83 100644
--- a/Source/Templates/gcc/startup_stm32l051xx.s
+++ b/Source/Templates/gcc/startup_stm32l051xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l052xx.s b/Source/Templates/gcc/startup_stm32l052xx.s
index 37a1278..3f13e1d 100644
--- a/Source/Templates/gcc/startup_stm32l052xx.s
+++ b/Source/Templates/gcc/startup_stm32l052xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l053xx.s b/Source/Templates/gcc/startup_stm32l053xx.s
index 066e208..2b3ac52 100644
--- a/Source/Templates/gcc/startup_stm32l053xx.s
+++ b/Source/Templates/gcc/startup_stm32l053xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
   mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l061xx.s b/Source/Templates/gcc/startup_stm32l061xx.s
deleted file mode 100644
index bed483f..0000000
--- a/Source/Templates/gcc/startup_stm32l061xx.s
+++ /dev/null
@@ -1,284 +0,0 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32l061xx.s
-  * @author    MCD Application Team
-  * @brief     STM32L061xx Devices vector table for GCC toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M0+ processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-  .cpu cortex-m0plus
-  .fpu softvfp
-  .thumb
-
-.global  g_pfnVectors
-.global  Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word  _sidata
-/* start address for the .data section. defined in linker script */
-.word  _sdata
-/* end address for the .data section. defined in linker script */
-.word  _edata
-/* start address for the .bss section. defined in linker script */
-.word  _sbss
-/* end address for the .bss section. defined in linker script */
-.word  _ebss
-
-    .section  .text.Reset_Handler
-  .weak  Reset_Handler
-  .type  Reset_Handler, %function
-Reset_Handler:  
-  ldr   r0, =_estack
-  mov   sp, r0          /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
-
-CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
-
-LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
-  movs  r3, #0
-  str  r3, [r2]
-  adds r2, r2, #4
-
-
-LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
-
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
-/* Call static constructors */
-    bl __libc_init_array
-/* Call the application's entry point.*/
-  bl  main
-
-LoopForever:
-    b LoopForever
-
-
-.size  Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section  .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-  b  Infinite_Loop
-  .size  Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
-   .section  .isr_vector,"a",%progbits
-  .type  g_pfnVectors, %object
-  .size  g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-  .word  _estack
-  .word  Reset_Handler
-  .word  NMI_Handler
-  .word  HardFault_Handler
-  .word  0
-  .word  0
-  .word  0
-  .word  0
-  .word  0
-  .word  0
-  .word  0
-  .word  SVC_Handler
-  .word  0
-  .word  0
-  .word  PendSV_Handler
-  .word  SysTick_Handler
-  .word     WWDG_IRQHandler                   /* Window WatchDog              */
-  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */
-  .word     RTC_IRQHandler                    /* RTC through the EXTI line     */
-  .word     FLASH_IRQHandler                  /* FLASH                        */
-  .word     RCC_IRQHandler                    /* RCC                          */
-  .word     EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
-  .word     EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
-  .word     EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
-  .word     0                                 /* Reserved                     */
-  .word     DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
-  .word     DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
-  .word     DMA1_Channel4_5_6_7_IRQHandler    /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
-  .word     ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2        */
-  .word     LPTIM1_IRQHandler                 /* LPTIM1                       */
-  .word     0                                 /* Reserved                     */
-  .word     TIM2_IRQHandler                   /* TIM2                         */
-  .word     0                                 /* Reserved                     */
-  .word     TIM6_IRQHandler                   /* TIM6                         */
-  .word     0               				          /* Reserved                     */
-  .word     0              					          /* Reserved                     */
-  .word     TIM21_IRQHandler                  /* TIM21                        */
-  .word     0                                 /* Reserved                     */
-  .word     TIM22_IRQHandler                  /* TIM22                        */
-  .word     I2C1_IRQHandler                   /* I2C1                         */
-  .word     I2C2_IRQHandler                   /* I2C2                         */
-  .word     SPI1_IRQHandler                   /* SPI1                         */
-  .word     SPI2_IRQHandler                   /* SPI2                         */
-  .word     USART1_IRQHandler                 /* USART1                       */
-  .word     USART2_IRQHandler                 /* USART2                       */
-  .word     AES_LPUART1_IRQHandler            /* AES and LPUART1              */
-  .word     0                                 /* Reserved                     */
-  .word     0                                 /* Reserved                     */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-   .weak      NMI_Handler
-   .thumb_set NMI_Handler,Default_Handler
-
-   .weak      HardFault_Handler
-   .thumb_set HardFault_Handler,Default_Handler
-
-   .weak      SVC_Handler
-   .thumb_set SVC_Handler,Default_Handler
-
-   .weak      PendSV_Handler
-   .thumb_set PendSV_Handler,Default_Handler
-
-   .weak      SysTick_Handler
-   .thumb_set SysTick_Handler,Default_Handler
-
-   .weak      WWDG_IRQHandler
-   .thumb_set WWDG_IRQHandler,Default_Handler
-
-   .weak      PVD_IRQHandler
-   .thumb_set PVD_IRQHandler,Default_Handler
-
-   .weak      RTC_IRQHandler
-   .thumb_set RTC_IRQHandler,Default_Handler
-
-   .weak      FLASH_IRQHandler
-   .thumb_set FLASH_IRQHandler,Default_Handler
-
-   .weak      RCC_IRQHandler
-   .thumb_set RCC_IRQHandler,Default_Handler
-
-   .weak      EXTI0_1_IRQHandler
-   .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
-   .weak      EXTI2_3_IRQHandler
-   .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
-   .weak      EXTI4_15_IRQHandler
-   .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
-   .weak      DMA1_Channel1_IRQHandler
-   .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-   .weak      DMA1_Channel2_3_IRQHandler
-   .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
-   .weak      DMA1_Channel4_5_6_7_IRQHandler
-   .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
-
-   .weak      ADC1_COMP_IRQHandler
-   .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
-   .weak      LPTIM1_IRQHandler
-   .thumb_set LPTIM1_IRQHandler,Default_Handler
-
-   .weak      TIM2_IRQHandler
-   .thumb_set TIM2_IRQHandler,Default_Handler
-
-   .weak      TIM6_IRQHandler
-   .thumb_set TIM6_IRQHandler,Default_Handler
-
-   .weak      TIM21_IRQHandler
-   .thumb_set TIM21_IRQHandler,Default_Handler
-
-   .weak      TIM22_IRQHandler
-   .thumb_set TIM22_IRQHandler,Default_Handler
-
-   .weak      I2C1_IRQHandler
-   .thumb_set I2C1_IRQHandler,Default_Handler
-
-   .weak      I2C2_IRQHandler
-   .thumb_set I2C2_IRQHandler,Default_Handler
-
-   .weak      SPI1_IRQHandler
-   .thumb_set SPI1_IRQHandler,Default_Handler
-
-   .weak      SPI2_IRQHandler
-   .thumb_set SPI2_IRQHandler,Default_Handler
-
-   .weak      USART1_IRQHandler
-   .thumb_set USART1_IRQHandler,Default_Handler
-
-   .weak      USART2_IRQHandler
-   .thumb_set USART2_IRQHandler,Default_Handler
-
-   .weak      AES_LPUART1_IRQHandler
-   .thumb_set AES_LPUART1_IRQHandler,Default_Handler
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Source/Templates/gcc/startup_stm32l062xx.s b/Source/Templates/gcc/startup_stm32l062xx.s
index 2005732..0bbf8b8 100644
--- a/Source/Templates/gcc/startup_stm32l062xx.s
+++ b/Source/Templates/gcc/startup_stm32l062xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l063xx.s b/Source/Templates/gcc/startup_stm32l063xx.s
index ed76586..7d16e33 100644
--- a/Source/Templates/gcc/startup_stm32l063xx.s
+++ b/Source/Templates/gcc/startup_stm32l063xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l071xx.s b/Source/Templates/gcc/startup_stm32l071xx.s
index 4713c5a..43327c5 100644
--- a/Source/Templates/gcc/startup_stm32l071xx.s
+++ b/Source/Templates/gcc/startup_stm32l071xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l072xx.s b/Source/Templates/gcc/startup_stm32l072xx.s
index 9edffa4..7a58897 100644
--- a/Source/Templates/gcc/startup_stm32l072xx.s
+++ b/Source/Templates/gcc/startup_stm32l072xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l073xx.s b/Source/Templates/gcc/startup_stm32l073xx.s
index 17b43d9..71269f1 100644
--- a/Source/Templates/gcc/startup_stm32l073xx.s
+++ b/Source/Templates/gcc/startup_stm32l073xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l081xx.s b/Source/Templates/gcc/startup_stm32l081xx.s
index b01912b..18c0e37 100644
--- a/Source/Templates/gcc/startup_stm32l081xx.s
+++ b/Source/Templates/gcc/startup_stm32l081xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l082xx.s b/Source/Templates/gcc/startup_stm32l082xx.s
index 1f168fc..adf895e 100644
--- a/Source/Templates/gcc/startup_stm32l082xx.s
+++ b/Source/Templates/gcc/startup_stm32l082xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l083xx.s b/Source/Templates/gcc/startup_stm32l083xx.s
index 2fb796b..662f4c2 100644
--- a/Source/Templates/gcc/startup_stm32l083xx.s
+++ b/Source/Templates/gcc/startup_stm32l083xx.s
@@ -12,28 +12,15 @@
   *            After Reset the Cortex-M0+ processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * @attention
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,34 +53,35 @@
    mov   sp, r0          /* set stack pointer */
 
 /* Copy the data segment initializers from flash to SRAM */
-  movs  r1, #0
-  b  LoopCopyDataInit
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
 
 CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
 
 LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
 /* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
 FillZerobss:
-  movs  r3, #0
   str  r3, [r2]
   adds r2, r2, #4
 
-
 LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
+  cmp r2, r4
+  bcc FillZerobss
 
 /* Call the clock system intitialization function.*/
   bl  SystemInit
diff --git a/Source/Templates/iar/startup_stm32l010x4.s b/Source/Templates/iar/startup_stm32l010x4.s
index d516d8b..279a453 100644
--- a/Source/Templates/iar/startup_stm32l010x4.s
+++ b/Source/Templates/iar/startup_stm32l010x4.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l010x4.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L010x4 Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l010x6.s b/Source/Templates/iar/startup_stm32l010x6.s
index 388bf70..1cc87d5 100644
--- a/Source/Templates/iar/startup_stm32l010x6.s
+++ b/Source/Templates/iar/startup_stm32l010x6.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l010x6.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L010x6 Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l010x8.s b/Source/Templates/iar/startup_stm32l010x8.s
index d03113f..a60c725 100644
--- a/Source/Templates/iar/startup_stm32l010x8.s
+++ b/Source/Templates/iar/startup_stm32l010x8.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l010x8.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L010x8 Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l010xb.s b/Source/Templates/iar/startup_stm32l010xb.s
index d2545a0..aa3f09a 100644
--- a/Source/Templates/iar/startup_stm32l010xb.s
+++ b/Source/Templates/iar/startup_stm32l010xb.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2018 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l010xb.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L010xB Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l011xx.s b/Source/Templates/iar/startup_stm32l011xx.s
index 8417aee..cc3d006 100644
--- a/Source/Templates/iar/startup_stm32l011xx.s
+++ b/Source/Templates/iar/startup_stm32l011xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l011xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L011xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l021xx.s b/Source/Templates/iar/startup_stm32l021xx.s
index 99c1ce7..caf84d5 100644
--- a/Source/Templates/iar/startup_stm32l021xx.s
+++ b/Source/Templates/iar/startup_stm32l021xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l021xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L021xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l031xx.s b/Source/Templates/iar/startup_stm32l031xx.s
index f6d5f95..69e3721 100644
--- a/Source/Templates/iar/startup_stm32l031xx.s
+++ b/Source/Templates/iar/startup_stm32l031xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l031xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L031xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l041xx.s b/Source/Templates/iar/startup_stm32l041xx.s
index a6e61b5..0e35271 100644
--- a/Source/Templates/iar/startup_stm32l041xx.s
+++ b/Source/Templates/iar/startup_stm32l041xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l041xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L041xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l051xx.s b/Source/Templates/iar/startup_stm32l051xx.s
index fd8254d..551dd45 100644
--- a/Source/Templates/iar/startup_stm32l051xx.s
+++ b/Source/Templates/iar/startup_stm32l051xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l051xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L051xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l052xx.s b/Source/Templates/iar/startup_stm32l052xx.s
index 654ab71..6622f02 100644
--- a/Source/Templates/iar/startup_stm32l052xx.s
+++ b/Source/Templates/iar/startup_stm32l052xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l052xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L052xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l053xx.s b/Source/Templates/iar/startup_stm32l053xx.s
index 78b4de4..e353615 100644
--- a/Source/Templates/iar/startup_stm32l053xx.s
+++ b/Source/Templates/iar/startup_stm32l053xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l053xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L053xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l061xx.s b/Source/Templates/iar/startup_stm32l061xx.s
deleted file mode 100644
index 2100f89..0000000
--- a/Source/Templates/iar/startup_stm32l061xx.s
+++ /dev/null
@@ -1,307 +0,0 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
-;* File Name          : startup_stm32l061xx.s
-;* Author             : MCD Application Team
-;* Description        : STM32L061xx Ultra Low Power Devices vector 
-;*                      This module performs:
-;*                      - Set the initial SP
-;*                      - Set the initial PC == _iar_program_start,
-;*                      - Set the vector table entries with the exceptions ISR 
-;*                        address.
-;*                      - Configure the system clock
-;*                      - Branches to main in the C library (which eventually
-;*                        calls main()).
-;*                      After Reset the Cortex-M0+ processor is in Thread mode,
-;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
-;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;*
-;*******************************************************************************/
-;
-;
-; The modules in this file are included in the libraries, and may be replaced
-; by any user-defined modules that define the PUBLIC symbol _program_start or
-; a user defined start symbol.
-; To override the cstartup defined in the library, simply add your modified
-; version to the workbench project.
-;
-; The vector table is normally located at address 0.
-; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
-; The name "__vector_table" has special meaning for C-SPY:
-; it is where the SP start value is found, and the NVIC vector
-; table register (VTOR) is initialized to this address if != 0.
-;
-; Cortex-M version
-;
-
-        MODULE  ?cstartup
-
-        ;; Forward declaration of sections.
-        SECTION CSTACK:DATA:NOROOT(3)
-
-        SECTION .intvec:CODE:NOROOT(2)
-
-        EXTERN  __iar_program_start
-        EXTERN  SystemInit        
-        PUBLIC  __vector_table
-
-        DATA
-__vector_table
-        DCD     sfe(CSTACK)
-        DCD     Reset_Handler             ; Reset Handler
-
-        DCD     NMI_Handler               ; NMI Handler
-        DCD     HardFault_Handler         ; Hard Fault Handler
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     SVC_Handler               ; SVCall Handler
-        DCD     0                         ; Reserved
-        DCD     0                         ; Reserved
-        DCD     PendSV_Handler            ; PendSV Handler
-        DCD     SysTick_Handler           ; SysTick Handler
-
-         ; External Interrupts
-                DCD     WWDG_IRQHandler                ; Window Watchdog
-                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
-                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
-                DCD     FLASH_IRQHandler               ; FLASH
-                DCD     RCC_IRQHandler             ; RCC
-                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
-                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
-                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
-                DCD     0                              ; Reserved
-                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
-                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
-                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
-                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
-                DCD     LPTIM1_IRQHandler              ; LPTIM1
-                DCD     0                              ; Reserved
-                DCD     TIM2_IRQHandler                ; TIM2
-                DCD     0                              ; Reserved
-                DCD     TIM6_IRQHandler                ; TIM6
-                DCD     0                              ; Reserved
-                DCD     0                              ; Reserved
-                DCD     TIM21_IRQHandler               ; TIM21
-                DCD     0                              ; Reserved
-                DCD     TIM22_IRQHandler               ; TIM22
-                DCD     I2C1_IRQHandler                ; I2C1
-                DCD     I2C2_IRQHandler                ; I2C2
-                DCD     SPI1_IRQHandler                ; SPI1
-                DCD     SPI2_IRQHandler                ; SPI2
-                DCD     USART1_IRQHandler              ; USART1
-                DCD     USART2_IRQHandler              ; USART2
-                DCD     AES_LPUART1_IRQHandler         ; AES and LPUART1
-                DCD     0                              ; Reserved    
-                DCD     0                              ; Reserved  
-                
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;
-;; Default interrupt handlers.
-;;
-        THUMB
-        PUBWEAK Reset_Handler
-        SECTION .text:CODE:NOROOT:REORDER(2)
-Reset_Handler
-        LDR     R0, =SystemInit
-        BLX     R0
-        LDR     R0, =__iar_program_start
-        BX      R0
-        
-        PUBWEAK NMI_Handler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-NMI_Handler
-        B NMI_Handler
-        
-        
-        PUBWEAK HardFault_Handler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-HardFault_Handler
-        B HardFault_Handler
-       
-        
-        PUBWEAK SVC_Handler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-SVC_Handler
-        B SVC_Handler
-        
-        
-        PUBWEAK PendSV_Handler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-PendSV_Handler  
-        B PendSV_Handler
-        
-        
-        PUBWEAK SysTick_Handler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-SysTick_Handler
-        B SysTick_Handler
-        
-        
-        PUBWEAK WWDG_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-WWDG_IRQHandler
-        B WWDG_IRQHandler
-        
-                
-        PUBWEAK PVD_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-PVD_IRQHandler
-        B PVD_IRQHandler
-        
-                
-        PUBWEAK RTC_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-RTC_IRQHandler
-        B RTC_IRQHandler
-        
-                
-        PUBWEAK FLASH_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-FLASH_IRQHandler
-        B FLASH_IRQHandler
-        
-                
-        PUBWEAK RCC_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-RCC_IRQHandler
-        B RCC_IRQHandler
-        
-                
-        PUBWEAK EXTI0_1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-EXTI0_1_IRQHandler
-        B EXTI0_1_IRQHandler
-        
-                
-        PUBWEAK EXTI2_3_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-EXTI2_3_IRQHandler
-        B EXTI2_3_IRQHandler
-        
-                
-        PUBWEAK EXTI4_15_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-EXTI4_15_IRQHandler
-        B EXTI4_15_IRQHandler
-        
-            
-        PUBWEAK DMA1_Channel1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-DMA1_Channel1_IRQHandler
-        B DMA1_Channel1_IRQHandler
-        
-                
-        PUBWEAK DMA1_Channel2_3_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-DMA1_Channel2_3_IRQHandler
-        B DMA1_Channel2_3_IRQHandler
-        
-                
-        PUBWEAK DMA1_Channel4_5_6_7_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-DMA1_Channel4_5_6_7_IRQHandler
-        B DMA1_Channel4_5_6_7_IRQHandler
-        
-                
-        PUBWEAK ADC1_COMP_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-ADC1_COMP_IRQHandler
-        B ADC1_COMP_IRQHandler
-        
-                 
-        PUBWEAK LPTIM1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-LPTIM1_IRQHandler
-        B LPTIM1_IRQHandler
-        
-                
-        PUBWEAK TIM2_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-TIM2_IRQHandler
-        B TIM2_IRQHandler
-        
-                
-        PUBWEAK TIM6_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-TIM6_IRQHandler
-        B TIM6_IRQHandler
-        
-        PUBWEAK TIM21_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-TIM21_IRQHandler
-        B TIM21_IRQHandler
-
-        PUBWEAK TIM22_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-TIM22_IRQHandler
-        B TIM22_IRQHandler
-        
-
-        PUBWEAK I2C1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-I2C1_IRQHandler
-        B I2C1_IRQHandler
-        
-                
-        PUBWEAK I2C2_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-I2C2_IRQHandler
-        B I2C2_IRQHandler
-        
-                
-        PUBWEAK SPI1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-SPI1_IRQHandler
-        B SPI1_IRQHandler
-        
-                
-        PUBWEAK SPI2_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-SPI2_IRQHandler
-        B SPI2_IRQHandler
-        
-                
-        PUBWEAK USART1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-USART1_IRQHandler
-        B USART1_IRQHandler
-        
-                
-        PUBWEAK USART2_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-USART2_IRQHandler
-        B USART2_IRQHandler
-        
-
-        PUBWEAK AES_LPUART1_IRQHandler
-        SECTION .text:CODE:NOROOT:REORDER(1)
-AES_LPUART1_IRQHandler
-        B AES_LPUART1_IRQHandler
-        
-        END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/Source/Templates/iar/startup_stm32l062xx.s b/Source/Templates/iar/startup_stm32l062xx.s
index 089e532..fa71383 100644
--- a/Source/Templates/iar/startup_stm32l062xx.s
+++ b/Source/Templates/iar/startup_stm32l062xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l062xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L062xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l063xx.s b/Source/Templates/iar/startup_stm32l063xx.s
index cee14e8..66cfe20 100644
--- a/Source/Templates/iar/startup_stm32l063xx.s
+++ b/Source/Templates/iar/startup_stm32l063xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l063xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L063xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l071xx.s b/Source/Templates/iar/startup_stm32l071xx.s
index efaba46..1372dd1 100644
--- a/Source/Templates/iar/startup_stm32l071xx.s
+++ b/Source/Templates/iar/startup_stm32l071xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l071xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L071xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l072xx.s b/Source/Templates/iar/startup_stm32l072xx.s
index bf5bf94..a6804a1 100644
--- a/Source/Templates/iar/startup_stm32l072xx.s
+++ b/Source/Templates/iar/startup_stm32l072xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l072xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L072xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l073xx.s b/Source/Templates/iar/startup_stm32l073xx.s
index 1dbc289..fc3b8d2 100644
--- a/Source/Templates/iar/startup_stm32l073xx.s
+++ b/Source/Templates/iar/startup_stm32l073xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l073xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L073xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l081xx.s b/Source/Templates/iar/startup_stm32l081xx.s
index a6dbe42..e906833 100644
--- a/Source/Templates/iar/startup_stm32l081xx.s
+++ b/Source/Templates/iar/startup_stm32l081xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l081xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L081xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l082xx.s b/Source/Templates/iar/startup_stm32l082xx.s
index 7156d97..92ce027 100644
--- a/Source/Templates/iar/startup_stm32l082xx.s
+++ b/Source/Templates/iar/startup_stm32l082xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l082xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L082xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l083xx.s b/Source/Templates/iar/startup_stm32l083xx.s
index 277712c..c99f5c1 100644
--- a/Source/Templates/iar/startup_stm32l083xx.s
+++ b/Source/Templates/iar/startup_stm32l083xx.s
@@ -1,4 +1,4 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;*******************************************************************************
 ;* File Name          : startup_stm32l083xx.s
 ;* Author             : MCD Application Team
 ;* Description        : STM32L083xx Ultra Low Power Devices vector 
@@ -12,31 +12,18 @@
 ;*                        calls main()).
 ;*                      After Reset the Cortex-M0+ processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;* 
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;*   1. Redistributions of source code must retain the above copyright notice,
-;*      this list of conditions and the following disclaimer.
-;*   2. Redistributions in binary form must reproduce the above copyright notice,
-;*      this list of conditions and the following disclaimer in the documentation
-;*      and/or other materials provided with the distribution.
-;*   3. Neither the name of STMicroelectronics nor the names of its contributors
-;*      may be used to endorse or promote products derived from this software
-;*      without specific prior written permission.
+;*******************************************************************************
+;* @attention
 ;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
 ;*
-;*******************************************************************************/
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
 ;
 ;
 ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/system_stm32l0xx.c b/Source/Templates/system_stm32l0xx.c
index 814b0c7..00a513c 100644
--- a/Source/Templates/system_stm32l0xx.c
+++ b/Source/Templates/system_stm32l0xx.c
@@ -77,11 +77,30 @@
   */
 /************************* Miscellaneous Configuration ************************/
 
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Uncomment the following line if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
 /* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x00U /*!< Vector Table base offset field.
-                                   This value must be a multiple of 0x100. */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+
 /******************************************************************************/
 /**
   * @}
@@ -134,37 +153,14 @@
   */
 void SystemInit (void)
 {
-/*!< Set MSION bit */
-  RCC->CR |= (uint32_t)0x00000100U;
-
-  /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
-  RCC->CFGR &= (uint32_t) 0x88FF400CU;
-
-  /*!< Reset HSION, HSIDIVEN, HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFF6U;
-
-  /*!< Reset HSI48ON  bit */
-  RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;
-
-  /*!< Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFFU;
-
-  /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
-  RCC->CFGR &= (uint32_t)0xFF02FFFFU;
-
-  /*!< Disable all interrupts */
-  RCC->CIER = 0x00000000U;
-
   /* Configure the Vector Table location add offset address ------------------*/
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
-#endif
+#if defined (USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
 }
 
 /**
-  * @brief  Update SystemCoreClock according to Clock Register Values
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
   *         The SystemCoreClock variable contains the core clock (HCLK), it can
   *         be used by the user application to setup the SysTick timer or configure
   *         other parameters.