| /** |
| * @file |
| * Packet buffer management |
| */ |
| |
| /** |
| * @defgroup pbuf Packet buffers (PBUF) |
| * @ingroup infrastructure |
| * |
| * Packets are built from the pbuf data structure. It supports dynamic |
| * memory allocation for packet contents or can reference externally |
| * managed packet contents both in RAM and ROM. Quick allocation for |
| * incoming packets is provided through pools with fixed sized pbufs. |
| * |
| * A packet may span over multiple pbufs, chained as a singly linked |
| * list. This is called a "pbuf chain". |
| * |
| * Multiple packets may be queued, also using this singly linked list. |
| * This is called a "packet queue". |
| * |
| * So, a packet queue consists of one or more pbuf chains, each of |
| * which consist of one or more pbufs. CURRENTLY, PACKET QUEUES ARE |
| * NOT SUPPORTED!!! Use helper structs to queue multiple packets. |
| * |
| * The differences between a pbuf chain and a packet queue are very |
| * precise but subtle. |
| * |
| * The last pbuf of a packet has a ->tot_len field that equals the |
| * ->len field. It can be found by traversing the list. If the last |
| * pbuf of a packet has a ->next field other than NULL, more packets |
| * are on the queue. |
| * |
| * Therefore, looping through a pbuf of a single packet, has an |
| * loop end condition (tot_len == p->len), NOT (next == NULL). |
| * |
| * Example of custom pbuf usage: @ref zerocopyrx |
| */ |
| |
| /* |
| * Copyright (c) 2001-2004 Swedish Institute of Computer Science. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT |
| * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
| * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
| * OF SUCH DAMAGE. |
| * |
| * This file is part of the lwIP TCP/IP stack. |
| * |
| * Author: Adam Dunkels <adam@sics.se> |
| * |
| */ |
| |
| #include "lwip/opt.h" |
| |
| #include "lwip/pbuf.h" |
| #include "lwip/stats.h" |
| #include "lwip/def.h" |
| #include "lwip/mem.h" |
| #include "lwip/memp.h" |
| #include "lwip/sys.h" |
| #include "lwip/netif.h" |
| #if LWIP_TCP && TCP_QUEUE_OOSEQ |
| #include "lwip/priv/tcp_priv.h" |
| #endif |
| #if LWIP_CHECKSUM_ON_COPY |
| #include "lwip/inet_chksum.h" |
| #endif |
| |
| #include <string.h> |
| |
| #define SIZEOF_STRUCT_PBUF LWIP_MEM_ALIGN_SIZE(sizeof(struct pbuf)) |
| /* Since the pool is created in memp, PBUF_POOL_BUFSIZE will be automatically |
| aligned there. Therefore, PBUF_POOL_BUFSIZE_ALIGNED can be used here. */ |
| #define PBUF_POOL_BUFSIZE_ALIGNED LWIP_MEM_ALIGN_SIZE(PBUF_POOL_BUFSIZE) |
| |
| static const struct pbuf * |
| pbuf_skip_const(const struct pbuf *in, u16_t in_offset, u16_t *out_offset); |
| |
| #if !LWIP_TCP || !TCP_QUEUE_OOSEQ || !PBUF_POOL_FREE_OOSEQ |
| #define PBUF_POOL_IS_EMPTY() |
| #else /* !LWIP_TCP || !TCP_QUEUE_OOSEQ || !PBUF_POOL_FREE_OOSEQ */ |
| |
| #if !NO_SYS |
| #ifndef PBUF_POOL_FREE_OOSEQ_QUEUE_CALL |
| #include "lwip/tcpip.h" |
| #define PBUF_POOL_FREE_OOSEQ_QUEUE_CALL() do { \ |
| if (tcpip_try_callback(pbuf_free_ooseq_callback, NULL) != ERR_OK) { \ |
| SYS_ARCH_PROTECT(old_level); \ |
| pbuf_free_ooseq_pending = 0; \ |
| SYS_ARCH_UNPROTECT(old_level); \ |
| } } while(0) |
| #endif /* PBUF_POOL_FREE_OOSEQ_QUEUE_CALL */ |
| #endif /* !NO_SYS */ |
| |
| volatile u8_t pbuf_free_ooseq_pending; |
| #define PBUF_POOL_IS_EMPTY() pbuf_pool_is_empty() |
| |
| /** |
| * Attempt to reclaim some memory from queued out-of-sequence TCP segments |
| * if we run out of pool pbufs. It's better to give priority to new packets |
| * if we're running out. |
| * |
| * This must be done in the correct thread context therefore this function |
| * can only be used with NO_SYS=0 and through tcpip_callback. |
| */ |
| #if !NO_SYS |
| static |
| #endif /* !NO_SYS */ |
| void |
| pbuf_free_ooseq(void) |
| { |
| struct tcp_pcb *pcb; |
| SYS_ARCH_SET(pbuf_free_ooseq_pending, 0); |
| |
| for (pcb = tcp_active_pcbs; NULL != pcb; pcb = pcb->next) { |
| if (pcb->ooseq != NULL) { |
| /** Free the ooseq pbufs of one PCB only */ |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free_ooseq: freeing out-of-sequence pbufs\n")); |
| tcp_free_ooseq(pcb); |
| return; |
| } |
| } |
| } |
| |
| #if !NO_SYS |
| /** |
| * Just a callback function for tcpip_callback() that calls pbuf_free_ooseq(). |
| */ |
| static void |
| pbuf_free_ooseq_callback(void *arg) |
| { |
| LWIP_UNUSED_ARG(arg); |
| pbuf_free_ooseq(); |
| } |
| #endif /* !NO_SYS */ |
| |
| /** Queue a call to pbuf_free_ooseq if not already queued. */ |
| static void |
| pbuf_pool_is_empty(void) |
| { |
| #ifndef PBUF_POOL_FREE_OOSEQ_QUEUE_CALL |
| SYS_ARCH_SET(pbuf_free_ooseq_pending, 1); |
| #else /* PBUF_POOL_FREE_OOSEQ_QUEUE_CALL */ |
| u8_t queued; |
| SYS_ARCH_DECL_PROTECT(old_level); |
| SYS_ARCH_PROTECT(old_level); |
| queued = pbuf_free_ooseq_pending; |
| pbuf_free_ooseq_pending = 1; |
| SYS_ARCH_UNPROTECT(old_level); |
| |
| if (!queued) { |
| /* queue a call to pbuf_free_ooseq if not already queued */ |
| PBUF_POOL_FREE_OOSEQ_QUEUE_CALL(); |
| } |
| #endif /* PBUF_POOL_FREE_OOSEQ_QUEUE_CALL */ |
| } |
| #endif /* !LWIP_TCP || !TCP_QUEUE_OOSEQ || !PBUF_POOL_FREE_OOSEQ */ |
| |
| /* Initialize members of struct pbuf after allocation */ |
| static void |
| pbuf_init_alloced_pbuf(struct pbuf *p, void *payload, u16_t tot_len, u16_t len, pbuf_type type, u8_t flags) |
| { |
| p->next = NULL; |
| p->payload = payload; |
| p->tot_len = tot_len; |
| p->len = len; |
| p->type_internal = (u8_t)type; |
| p->flags = flags; |
| p->ref = 1; |
| p->if_idx = NETIF_NO_INDEX; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Allocates a pbuf of the given type (possibly a chain for PBUF_POOL type). |
| * |
| * The actual memory allocated for the pbuf is determined by the |
| * layer at which the pbuf is allocated and the requested size |
| * (from the size parameter). |
| * |
| * @param layer header size |
| * @param length size of the pbuf's payload |
| * @param type this parameter decides how and where the pbuf |
| * should be allocated as follows: |
| * |
| * - PBUF_RAM: buffer memory for pbuf is allocated as one large |
| * chunk. This includes protocol headers as well. |
| * - PBUF_ROM: no buffer memory is allocated for the pbuf, even for |
| * protocol headers. Additional headers must be prepended |
| * by allocating another pbuf and chain in to the front of |
| * the ROM pbuf. It is assumed that the memory used is really |
| * similar to ROM in that it is immutable and will not be |
| * changed. Memory which is dynamic should generally not |
| * be attached to PBUF_ROM pbufs. Use PBUF_REF instead. |
| * - PBUF_REF: no buffer memory is allocated for the pbuf, even for |
| * protocol headers. It is assumed that the pbuf is only |
| * being used in a single thread. If the pbuf gets queued, |
| * then pbuf_take should be called to copy the buffer. |
| * - PBUF_POOL: the pbuf is allocated as a pbuf chain, with pbufs from |
| * the pbuf pool that is allocated during pbuf_init(). |
| * |
| * @return the allocated pbuf. If multiple pbufs where allocated, this |
| * is the first pbuf of a pbuf chain. |
| */ |
| struct pbuf * |
| pbuf_alloc(pbuf_layer layer, u16_t length, pbuf_type type) |
| { |
| struct pbuf *p; |
| u16_t offset = (u16_t)layer; |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F")\n", length)); |
| |
| switch (type) { |
| case PBUF_REF: /* fall through */ |
| case PBUF_ROM: |
| p = pbuf_alloc_reference(NULL, length, type); |
| break; |
| case PBUF_POOL: { |
| struct pbuf *q, *last; |
| u16_t rem_len; /* remaining length */ |
| p = NULL; |
| last = NULL; |
| rem_len = length; |
| do { |
| u16_t qlen; |
| q = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL); |
| if (q == NULL) { |
| PBUF_POOL_IS_EMPTY(); |
| /* free chain so far allocated */ |
| if (p) { |
| pbuf_free(p); |
| } |
| /* bail out unsuccessfully */ |
| return NULL; |
| } |
| qlen = LWIP_MIN(rem_len, (u16_t)(PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset))); |
| pbuf_init_alloced_pbuf(q, LWIP_MEM_ALIGN((void *)((u8_t *)q + SIZEOF_STRUCT_PBUF + offset)), |
| rem_len, qlen, type, 0); |
| LWIP_ASSERT("pbuf_alloc: pbuf q->payload properly aligned", |
| ((mem_ptr_t)q->payload % MEM_ALIGNMENT) == 0); |
| LWIP_ASSERT("PBUF_POOL_BUFSIZE must be bigger than MEM_ALIGNMENT", |
| (PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset)) > 0 ); |
| if (p == NULL) { |
| /* allocated head of pbuf chain (into p) */ |
| p = q; |
| } else { |
| /* make previous pbuf point to this pbuf */ |
| last->next = q; |
| } |
| last = q; |
| rem_len = (u16_t)(rem_len - qlen); |
| offset = 0; |
| } while (rem_len > 0); |
| break; |
| } |
| case PBUF_RAM: { |
| mem_size_t payload_len = (mem_size_t)(LWIP_MEM_ALIGN_SIZE(offset) + LWIP_MEM_ALIGN_SIZE(length)); |
| mem_size_t alloc_len = (mem_size_t)(LWIP_MEM_ALIGN_SIZE(SIZEOF_STRUCT_PBUF) + payload_len); |
| |
| /* bug #50040: Check for integer overflow when calculating alloc_len */ |
| if ((payload_len < LWIP_MEM_ALIGN_SIZE(length)) || |
| (alloc_len < LWIP_MEM_ALIGN_SIZE(length))) { |
| return NULL; |
| } |
| |
| /* If pbuf is to be allocated in RAM, allocate memory for it. */ |
| p = (struct pbuf *)mem_malloc(alloc_len); |
| if (p == NULL) { |
| return NULL; |
| } |
| pbuf_init_alloced_pbuf(p, LWIP_MEM_ALIGN((void *)((u8_t *)p + SIZEOF_STRUCT_PBUF + offset)), |
| length, length, type, 0); |
| LWIP_ASSERT("pbuf_alloc: pbuf->payload properly aligned", |
| ((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0); |
| break; |
| } |
| default: |
| LWIP_ASSERT("pbuf_alloc: erroneous type", 0); |
| return NULL; |
| } |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F") == %p\n", length, (void *)p)); |
| return p; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Allocates a pbuf for referenced data. |
| * Referenced data can be volatile (PBUF_REF) or long-lived (PBUF_ROM). |
| * |
| * The actual memory allocated for the pbuf is determined by the |
| * layer at which the pbuf is allocated and the requested size |
| * (from the size parameter). |
| * |
| * @param payload referenced payload |
| * @param length size of the pbuf's payload |
| * @param type this parameter decides how and where the pbuf |
| * should be allocated as follows: |
| * |
| * - PBUF_ROM: It is assumed that the memory used is really |
| * similar to ROM in that it is immutable and will not be |
| * changed. Memory which is dynamic should generally not |
| * be attached to PBUF_ROM pbufs. Use PBUF_REF instead. |
| * - PBUF_REF: It is assumed that the pbuf is only |
| * being used in a single thread. If the pbuf gets queued, |
| * then pbuf_take should be called to copy the buffer. |
| * |
| * @return the allocated pbuf. |
| */ |
| struct pbuf * |
| pbuf_alloc_reference(void *payload, u16_t length, pbuf_type type) |
| { |
| struct pbuf *p; |
| LWIP_ASSERT("invalid pbuf_type", (type == PBUF_REF) || (type == PBUF_ROM)); |
| /* only allocate memory for the pbuf structure */ |
| p = (struct pbuf *)memp_malloc(MEMP_PBUF); |
| if (p == NULL) { |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS, |
| ("pbuf_alloc_reference: Could not allocate MEMP_PBUF for PBUF_%s.\n", |
| (type == PBUF_ROM) ? "ROM" : "REF")); |
| return NULL; |
| } |
| pbuf_init_alloced_pbuf(p, payload, length, length, type, 0); |
| return p; |
| } |
| |
| |
| #if LWIP_SUPPORT_CUSTOM_PBUF |
| /** |
| * @ingroup pbuf |
| * Initialize a custom pbuf (already allocated). |
| * Example of custom pbuf usage: @ref zerocopyrx |
| * |
| * @param l header size |
| * @param length size of the pbuf's payload |
| * @param type type of the pbuf (only used to treat the pbuf accordingly, as |
| * this function allocates no memory) |
| * @param p pointer to the custom pbuf to initialize (already allocated) |
| * @param payload_mem pointer to the buffer that is used for payload and headers, |
| * must be at least big enough to hold 'length' plus the header size, |
| * may be NULL if set later. |
| * ATTENTION: The caller is responsible for correct alignment of this buffer!! |
| * @param payload_mem_len the size of the 'payload_mem' buffer, must be at least |
| * big enough to hold 'length' plus the header size |
| */ |
| struct pbuf * |
| pbuf_alloced_custom(pbuf_layer l, u16_t length, pbuf_type type, struct pbuf_custom *p, |
| void *payload_mem, u16_t payload_mem_len) |
| { |
| u16_t offset = (u16_t)l; |
| void *payload; |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloced_custom(length=%"U16_F")\n", length)); |
| |
| if (LWIP_MEM_ALIGN_SIZE(offset) + length > payload_mem_len) { |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_WARNING, ("pbuf_alloced_custom(length=%"U16_F") buffer too short\n", length)); |
| return NULL; |
| } |
| |
| if (payload_mem != NULL) { |
| payload = (u8_t *)payload_mem + LWIP_MEM_ALIGN_SIZE(offset); |
| } else { |
| payload = NULL; |
| } |
| pbuf_init_alloced_pbuf(&p->pbuf, payload, length, length, type, PBUF_FLAG_IS_CUSTOM); |
| return &p->pbuf; |
| } |
| #endif /* LWIP_SUPPORT_CUSTOM_PBUF */ |
| |
| /** |
| * @ingroup pbuf |
| * Shrink a pbuf chain to a desired length. |
| * |
| * @param p pbuf to shrink. |
| * @param new_len desired new length of pbuf chain |
| * |
| * Depending on the desired length, the first few pbufs in a chain might |
| * be skipped and left unchanged. The new last pbuf in the chain will be |
| * resized, and any remaining pbufs will be freed. |
| * |
| * @note If the pbuf is ROM/REF, only the ->tot_len and ->len fields are adjusted. |
| * @note May not be called on a packet queue. |
| * |
| * @note Despite its name, pbuf_realloc cannot grow the size of a pbuf (chain). |
| */ |
| void |
| pbuf_realloc(struct pbuf *p, u16_t new_len) |
| { |
| struct pbuf *q; |
| u16_t rem_len; /* remaining length */ |
| u16_t shrink; |
| |
| LWIP_ASSERT("pbuf_realloc: p != NULL", p != NULL); |
| |
| /* desired length larger than current length? */ |
| if (new_len >= p->tot_len) { |
| /* enlarging not yet supported */ |
| return; |
| } |
| |
| /* the pbuf chain grows by (new_len - p->tot_len) bytes |
| * (which may be negative in case of shrinking) */ |
| shrink = (u16_t)(p->tot_len - new_len); |
| |
| /* first, step over any pbufs that should remain in the chain */ |
| rem_len = new_len; |
| q = p; |
| /* should this pbuf be kept? */ |
| while (rem_len > q->len) { |
| /* decrease remaining length by pbuf length */ |
| rem_len = (u16_t)(rem_len - q->len); |
| /* decrease total length indicator */ |
| q->tot_len = (u16_t)(q->tot_len - shrink); |
| /* proceed to next pbuf in chain */ |
| q = q->next; |
| LWIP_ASSERT("pbuf_realloc: q != NULL", q != NULL); |
| } |
| /* we have now reached the new last pbuf (in q) */ |
| /* rem_len == desired length for pbuf q */ |
| |
| /* shrink allocated memory for PBUF_RAM */ |
| /* (other types merely adjust their length fields */ |
| if (pbuf_match_allocsrc(q, PBUF_TYPE_ALLOC_SRC_MASK_STD_HEAP) && (rem_len != q->len) |
| #if LWIP_SUPPORT_CUSTOM_PBUF |
| && ((q->flags & PBUF_FLAG_IS_CUSTOM) == 0) |
| #endif /* LWIP_SUPPORT_CUSTOM_PBUF */ |
| ) { |
| /* reallocate and adjust the length of the pbuf that will be split */ |
| q = (struct pbuf *)mem_trim(q, (mem_size_t)(((u8_t *)q->payload - (u8_t *)q) + rem_len)); |
| LWIP_ASSERT("mem_trim returned q == NULL", q != NULL); |
| } |
| /* adjust length fields for new last pbuf */ |
| q->len = rem_len; |
| q->tot_len = q->len; |
| |
| /* any remaining pbufs in chain? */ |
| if (q->next != NULL) { |
| /* free remaining pbufs in chain */ |
| pbuf_free(q->next); |
| } |
| /* q is last packet in chain */ |
| q->next = NULL; |
| |
| } |
| |
| /** |
| * Adjusts the payload pointer to reveal headers in the payload. |
| * @see pbuf_add_header. |
| * |
| * @param p pbuf to change the header size. |
| * @param header_size_increment Number of bytes to increment header size. |
| * @param force Allow 'header_size_increment > 0' for PBUF_REF/PBUF_ROM types |
| * |
| * @return non-zero on failure, zero on success. |
| * |
| */ |
| static u8_t |
| pbuf_add_header_impl(struct pbuf *p, size_t header_size_increment, u8_t force) |
| { |
| u16_t type_internal; |
| void *payload; |
| u16_t increment_magnitude; |
| |
| LWIP_ASSERT("p != NULL", p != NULL); |
| if ((p == NULL) || (header_size_increment > 0xFFFF)) { |
| return 1; |
| } |
| if (header_size_increment == 0) { |
| return 0; |
| } |
| |
| increment_magnitude = (u16_t)header_size_increment; |
| /* Do not allow tot_len to wrap as a result. */ |
| if ((u16_t)(increment_magnitude + p->tot_len) < increment_magnitude) { |
| return 1; |
| } |
| |
| type_internal = p->type_internal; |
| |
| /* pbuf types containing payloads? */ |
| if (type_internal & PBUF_TYPE_FLAG_STRUCT_DATA_CONTIGUOUS) { |
| /* set new payload pointer */ |
| payload = (u8_t *)p->payload - header_size_increment; |
| /* boundary check fails? */ |
| if ((u8_t *)payload < (u8_t *)p + SIZEOF_STRUCT_PBUF) { |
| LWIP_DEBUGF( PBUF_DEBUG | LWIP_DBG_TRACE, |
| ("pbuf_add_header: failed as %p < %p (not enough space for new header size)\n", |
| (void *)payload, (void *)((u8_t *)p + SIZEOF_STRUCT_PBUF))); |
| /* bail out unsuccessfully */ |
| return 1; |
| } |
| /* pbuf types referring to external payloads? */ |
| } else { |
| /* hide a header in the payload? */ |
| if (force) { |
| payload = (u8_t *)p->payload - header_size_increment; |
| } else { |
| /* cannot expand payload to front (yet!) |
| * bail out unsuccessfully */ |
| return 1; |
| } |
| } |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_add_header: old %p new %p (%"U16_F")\n", |
| (void *)p->payload, (void *)payload, increment_magnitude)); |
| |
| /* modify pbuf fields */ |
| p->payload = payload; |
| p->len = (u16_t)(p->len + increment_magnitude); |
| p->tot_len = (u16_t)(p->tot_len + increment_magnitude); |
| |
| |
| return 0; |
| } |
| |
| /** |
| * Adjusts the payload pointer to reveal headers in the payload. |
| * |
| * Adjusts the ->payload pointer so that space for a header |
| * appears in the pbuf payload. |
| * |
| * The ->payload, ->tot_len and ->len fields are adjusted. |
| * |
| * @param p pbuf to change the header size. |
| * @param header_size_increment Number of bytes to increment header size which |
| * increases the size of the pbuf. New space is on the front. |
| * If header_size_increment is 0, this function does nothing and returns successful. |
| * |
| * PBUF_ROM and PBUF_REF type buffers cannot have their sizes increased, so |
| * the call will fail. A check is made that the increase in header size does |
| * not move the payload pointer in front of the start of the buffer. |
| * |
| * @return non-zero on failure, zero on success. |
| * |
| */ |
| u8_t |
| pbuf_add_header(struct pbuf *p, size_t header_size_increment) |
| { |
| return pbuf_add_header_impl(p, header_size_increment, 0); |
| } |
| |
| /** |
| * Same as @ref pbuf_add_header but does not check if 'header_size > 0' is allowed. |
| * This is used internally only, to allow PBUF_REF for RX. |
| */ |
| u8_t |
| pbuf_add_header_force(struct pbuf *p, size_t header_size_increment) |
| { |
| return pbuf_add_header_impl(p, header_size_increment, 1); |
| } |
| |
| /** |
| * Adjusts the payload pointer to hide headers in the payload. |
| * |
| * Adjusts the ->payload pointer so that space for a header |
| * disappears in the pbuf payload. |
| * |
| * The ->payload, ->tot_len and ->len fields are adjusted. |
| * |
| * @param p pbuf to change the header size. |
| * @param header_size_decrement Number of bytes to decrement header size which |
| * decreases the size of the pbuf. |
| * If header_size_decrement is 0, this function does nothing and returns successful. |
| * @return non-zero on failure, zero on success. |
| * |
| */ |
| u8_t |
| pbuf_remove_header(struct pbuf *p, size_t header_size_decrement) |
| { |
| void *payload; |
| u16_t increment_magnitude; |
| |
| LWIP_ASSERT("p != NULL", p != NULL); |
| if ((p == NULL) || (header_size_decrement > 0xFFFF)) { |
| return 1; |
| } |
| if (header_size_decrement == 0) { |
| return 0; |
| } |
| |
| increment_magnitude = (u16_t)header_size_decrement; |
| /* Check that we aren't going to move off the end of the pbuf */ |
| LWIP_ERROR("increment_magnitude <= p->len", (increment_magnitude <= p->len), return 1;); |
| |
| /* remember current payload pointer */ |
| payload = p->payload; |
| LWIP_UNUSED_ARG(payload); /* only used in LWIP_DEBUGF below */ |
| |
| /* increase payload pointer (guarded by length check above) */ |
| p->payload = (u8_t *)p->payload + header_size_decrement; |
| /* modify pbuf length fields */ |
| p->len = (u16_t)(p->len - increment_magnitude); |
| p->tot_len = (u16_t)(p->tot_len - increment_magnitude); |
| |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_remove_header: old %p new %p (%"U16_F")\n", |
| (void *)payload, (void *)p->payload, increment_magnitude)); |
| |
| return 0; |
| } |
| |
| static u8_t |
| pbuf_header_impl(struct pbuf *p, s16_t header_size_increment, u8_t force) |
| { |
| if (header_size_increment < 0) { |
| return pbuf_remove_header(p, (size_t) - header_size_increment); |
| } else { |
| return pbuf_add_header_impl(p, (size_t)header_size_increment, force); |
| } |
| } |
| |
| /** |
| * Adjusts the payload pointer to hide or reveal headers in the payload. |
| * |
| * Adjusts the ->payload pointer so that space for a header |
| * (dis)appears in the pbuf payload. |
| * |
| * The ->payload, ->tot_len and ->len fields are adjusted. |
| * |
| * @param p pbuf to change the header size. |
| * @param header_size_increment Number of bytes to increment header size which |
| * increases the size of the pbuf. New space is on the front. |
| * (Using a negative value decreases the header size.) |
| * If header_size_increment is 0, this function does nothing and returns successful. |
| * |
| * PBUF_ROM and PBUF_REF type buffers cannot have their sizes increased, so |
| * the call will fail. A check is made that the increase in header size does |
| * not move the payload pointer in front of the start of the buffer. |
| * @return non-zero on failure, zero on success. |
| * |
| */ |
| u8_t |
| pbuf_header(struct pbuf *p, s16_t header_size_increment) |
| { |
| return pbuf_header_impl(p, header_size_increment, 0); |
| } |
| |
| /** |
| * Same as pbuf_header but does not check if 'header_size > 0' is allowed. |
| * This is used internally only, to allow PBUF_REF for RX. |
| */ |
| u8_t |
| pbuf_header_force(struct pbuf *p, s16_t header_size_increment) |
| { |
| return pbuf_header_impl(p, header_size_increment, 1); |
| } |
| |
| /** Similar to pbuf_header(-size) but de-refs header pbufs for (size >= p->len) |
| * |
| * @param q pbufs to operate on |
| * @param size The number of bytes to remove from the beginning of the pbuf list. |
| * While size >= p->len, pbufs are freed. |
| * ATTENTION: this is the opposite direction as @ref pbuf_header, but |
| * takes an u16_t not s16_t! |
| * @return the new head pbuf |
| */ |
| struct pbuf * |
| pbuf_free_header(struct pbuf *q, u16_t size) |
| { |
| struct pbuf *p = q; |
| u16_t free_left = size; |
| while (free_left && p) { |
| if (free_left >= p->len) { |
| struct pbuf *f = p; |
| free_left = (u16_t)(free_left - p->len); |
| p = p->next; |
| f->next = 0; |
| pbuf_free(f); |
| } else { |
| pbuf_remove_header(p, free_left); |
| free_left = 0; |
| } |
| } |
| return p; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Dereference a pbuf chain or queue and deallocate any no-longer-used |
| * pbufs at the head of this chain or queue. |
| * |
| * Decrements the pbuf reference count. If it reaches zero, the pbuf is |
| * deallocated. |
| * |
| * For a pbuf chain, this is repeated for each pbuf in the chain, |
| * up to the first pbuf which has a non-zero reference count after |
| * decrementing. So, when all reference counts are one, the whole |
| * chain is free'd. |
| * |
| * @param p The pbuf (chain) to be dereferenced. |
| * |
| * @return the number of pbufs that were de-allocated |
| * from the head of the chain. |
| * |
| * @note MUST NOT be called on a packet queue (Not verified to work yet). |
| * @note the reference counter of a pbuf equals the number of pointers |
| * that refer to the pbuf (or into the pbuf). |
| * |
| * @internal examples: |
| * |
| * Assuming existing chains a->b->c with the following reference |
| * counts, calling pbuf_free(a) results in: |
| * |
| * 1->2->3 becomes ...1->3 |
| * 3->3->3 becomes 2->3->3 |
| * 1->1->2 becomes ......1 |
| * 2->1->1 becomes 1->1->1 |
| * 1->1->1 becomes ....... |
| * |
| */ |
| u8_t |
| pbuf_free(struct pbuf *p) |
| { |
| u8_t alloc_src; |
| struct pbuf *q; |
| u8_t count; |
| |
| if (p == NULL) { |
| LWIP_ASSERT("p != NULL", p != NULL); |
| /* if assertions are disabled, proceed with debug output */ |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS, |
| ("pbuf_free(p == NULL) was called.\n")); |
| return 0; |
| } |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free(%p)\n", (void *)p)); |
| |
| PERF_START; |
| |
| count = 0; |
| /* de-allocate all consecutive pbufs from the head of the chain that |
| * obtain a zero reference count after decrementing*/ |
| while (p != NULL) { |
| LWIP_PBUF_REF_T ref; |
| SYS_ARCH_DECL_PROTECT(old_level); |
| /* Since decrementing ref cannot be guaranteed to be a single machine operation |
| * we must protect it. We put the new ref into a local variable to prevent |
| * further protection. */ |
| SYS_ARCH_PROTECT(old_level); |
| /* all pbufs in a chain are referenced at least once */ |
| LWIP_ASSERT("pbuf_free: p->ref > 0", p->ref > 0); |
| /* decrease reference count (number of pointers to pbuf) */ |
| ref = --(p->ref); |
| SYS_ARCH_UNPROTECT(old_level); |
| /* this pbuf is no longer referenced to? */ |
| if (ref == 0) { |
| /* remember next pbuf in chain for next iteration */ |
| q = p->next; |
| LWIP_DEBUGF( PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free: deallocating %p\n", (void *)p)); |
| alloc_src = pbuf_get_allocsrc(p); |
| #if LWIP_SUPPORT_CUSTOM_PBUF |
| /* is this a custom pbuf? */ |
| if ((p->flags & PBUF_FLAG_IS_CUSTOM) != 0) { |
| struct pbuf_custom *pc = (struct pbuf_custom *)p; |
| LWIP_ASSERT("pc->custom_free_function != NULL", pc->custom_free_function != NULL); |
| pc->custom_free_function(p); |
| } else |
| #endif /* LWIP_SUPPORT_CUSTOM_PBUF */ |
| { |
| /* is this a pbuf from the pool? */ |
| if (alloc_src == PBUF_TYPE_ALLOC_SRC_MASK_STD_MEMP_PBUF_POOL) { |
| memp_free(MEMP_PBUF_POOL, p); |
| /* is this a ROM or RAM referencing pbuf? */ |
| } else if (alloc_src == PBUF_TYPE_ALLOC_SRC_MASK_STD_MEMP_PBUF) { |
| memp_free(MEMP_PBUF, p); |
| /* type == PBUF_RAM */ |
| } else if (alloc_src == PBUF_TYPE_ALLOC_SRC_MASK_STD_HEAP) { |
| mem_free(p); |
| } else { |
| /* @todo: support freeing other types */ |
| LWIP_ASSERT("invalid pbuf type", 0); |
| } |
| } |
| count++; |
| /* proceed to next pbuf */ |
| p = q; |
| /* p->ref > 0, this pbuf is still referenced to */ |
| /* (and so the remaining pbufs in chain as well) */ |
| } else { |
| LWIP_DEBUGF( PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free: %p has ref %"U16_F", ending here.\n", (void *)p, (u16_t)ref)); |
| /* stop walking through the chain */ |
| p = NULL; |
| } |
| } |
| PERF_STOP("pbuf_free"); |
| /* return number of de-allocated pbufs */ |
| return count; |
| } |
| |
| /** |
| * Count number of pbufs in a chain |
| * |
| * @param p first pbuf of chain |
| * @return the number of pbufs in a chain |
| */ |
| u16_t |
| pbuf_clen(const struct pbuf *p) |
| { |
| u16_t len; |
| |
| len = 0; |
| while (p != NULL) { |
| ++len; |
| p = p->next; |
| } |
| return len; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Increment the reference count of the pbuf. |
| * |
| * @param p pbuf to increase reference counter of |
| * |
| */ |
| void |
| pbuf_ref(struct pbuf *p) |
| { |
| /* pbuf given? */ |
| if (p != NULL) { |
| SYS_ARCH_SET(p->ref, (LWIP_PBUF_REF_T)(p->ref + 1)); |
| LWIP_ASSERT("pbuf ref overflow", p->ref > 0); |
| } |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Concatenate two pbufs (each may be a pbuf chain) and take over |
| * the caller's reference of the tail pbuf. |
| * |
| * @note The caller MAY NOT reference the tail pbuf afterwards. |
| * Use pbuf_chain() for that purpose. |
| * |
| * This function explicitly does not check for tot_len overflow to prevent |
| * failing to queue too long pbufs. This can produce invalid pbufs, so |
| * handle with care! |
| * |
| * @see pbuf_chain() |
| */ |
| void |
| pbuf_cat(struct pbuf *h, struct pbuf *t) |
| { |
| struct pbuf *p; |
| |
| LWIP_ERROR("(h != NULL) && (t != NULL) (programmer violates API)", |
| ((h != NULL) && (t != NULL)), return;); |
| |
| /* proceed to last pbuf of chain */ |
| for (p = h; p->next != NULL; p = p->next) { |
| /* add total length of second chain to all totals of first chain */ |
| p->tot_len = (u16_t)(p->tot_len + t->tot_len); |
| } |
| /* { p is last pbuf of first h chain, p->next == NULL } */ |
| LWIP_ASSERT("p->tot_len == p->len (of last pbuf in chain)", p->tot_len == p->len); |
| LWIP_ASSERT("p->next == NULL", p->next == NULL); |
| /* add total length of second chain to last pbuf total of first chain */ |
| p->tot_len = (u16_t)(p->tot_len + t->tot_len); |
| /* chain last pbuf of head (p) with first of tail (t) */ |
| p->next = t; |
| /* p->next now references t, but the caller will drop its reference to t, |
| * so netto there is no change to the reference count of t. |
| */ |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Chain two pbufs (or pbuf chains) together. |
| * |
| * The caller MUST call pbuf_free(t) once it has stopped |
| * using it. Use pbuf_cat() instead if you no longer use t. |
| * |
| * @param h head pbuf (chain) |
| * @param t tail pbuf (chain) |
| * @note The pbufs MUST belong to the same packet. |
| * @note MAY NOT be called on a packet queue. |
| * |
| * The ->tot_len fields of all pbufs of the head chain are adjusted. |
| * The ->next field of the last pbuf of the head chain is adjusted. |
| * The ->ref field of the first pbuf of the tail chain is adjusted. |
| * |
| */ |
| void |
| pbuf_chain(struct pbuf *h, struct pbuf *t) |
| { |
| pbuf_cat(h, t); |
| /* t is now referenced by h */ |
| pbuf_ref(t); |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_chain: %p references %p\n", (void *)h, (void *)t)); |
| } |
| |
| /** |
| * Dechains the first pbuf from its succeeding pbufs in the chain. |
| * |
| * Makes p->tot_len field equal to p->len. |
| * @param p pbuf to dechain |
| * @return remainder of the pbuf chain, or NULL if it was de-allocated. |
| * @note May not be called on a packet queue. |
| */ |
| struct pbuf * |
| pbuf_dechain(struct pbuf *p) |
| { |
| struct pbuf *q; |
| u8_t tail_gone = 1; |
| /* tail */ |
| q = p->next; |
| /* pbuf has successor in chain? */ |
| if (q != NULL) { |
| /* assert tot_len invariant: (p->tot_len == p->len + (p->next? p->next->tot_len: 0) */ |
| LWIP_ASSERT("p->tot_len == p->len + q->tot_len", q->tot_len == p->tot_len - p->len); |
| /* enforce invariant if assertion is disabled */ |
| q->tot_len = (u16_t)(p->tot_len - p->len); |
| /* decouple pbuf from remainder */ |
| p->next = NULL; |
| /* total length of pbuf p is its own length only */ |
| p->tot_len = p->len; |
| /* q is no longer referenced by p, free it */ |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_dechain: unreferencing %p\n", (void *)q)); |
| tail_gone = pbuf_free(q); |
| if (tail_gone > 0) { |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, |
| ("pbuf_dechain: deallocated %p (as it is no longer referenced)\n", (void *)q)); |
| } |
| /* return remaining tail or NULL if deallocated */ |
| } |
| /* assert tot_len invariant: (p->tot_len == p->len + (p->next? p->next->tot_len: 0) */ |
| LWIP_ASSERT("p->tot_len == p->len", p->tot_len == p->len); |
| return ((tail_gone > 0) ? NULL : q); |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Create PBUF_RAM copies of pbufs. |
| * |
| * Used to queue packets on behalf of the lwIP stack, such as |
| * ARP based queueing. |
| * |
| * @note You MUST explicitly use p = pbuf_take(p); |
| * |
| * @note Only one packet is copied, no packet queue! |
| * |
| * @param p_to pbuf destination of the copy |
| * @param p_from pbuf source of the copy |
| * |
| * @return ERR_OK if pbuf was copied |
| * ERR_ARG if one of the pbufs is NULL or p_to is not big |
| * enough to hold p_from |
| */ |
| err_t |
| pbuf_copy(struct pbuf *p_to, const struct pbuf *p_from) |
| { |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_copy(%p, %p)\n", |
| (const void *)p_to, (const void *)p_from)); |
| |
| LWIP_ERROR("pbuf_copy: invalid source", p_from != NULL, return ERR_ARG;); |
| return pbuf_copy_partial_pbuf(p_to, p_from, p_from->tot_len, 0); |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Copy part or all of one packet buffer into another, to a specified offset. |
| * |
| * @note Only data in one packet is copied, no packet queue! |
| * @note Argument order is shared with pbuf_copy, but different than pbuf_copy_partial. |
| * |
| * @param p_to pbuf destination of the copy |
| * @param p_from pbuf source of the copy |
| * @param copy_len number of bytes to copy |
| * @param offset offset in destination pbuf where to copy to |
| * |
| * @return ERR_OK if copy_len bytes were copied |
| * ERR_ARG if one of the pbufs is NULL or p_from is shorter than copy_len |
| * or p_to is not big enough to hold copy_len at offset |
| * ERR_VAL if any of the pbufs are part of a queue |
| */ |
| err_t |
| pbuf_copy_partial_pbuf(struct pbuf *p_to, const struct pbuf *p_from, u16_t copy_len, u16_t offset) |
| { |
| size_t offset_to = offset, offset_from = 0, len_calc; |
| u16_t len; |
| |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_copy_partial_pbuf(%p, %p, %"U16_F", %"U16_F")\n", |
| (const void *)p_to, (const void *)p_from, copy_len, offset)); |
| |
| /* is the copy_len in range? */ |
| LWIP_ERROR("pbuf_copy_partial_pbuf: copy_len bigger than source", ((p_from != NULL) && |
| (p_from->tot_len >= copy_len)), return ERR_ARG;); |
| /* is the target big enough to hold the source? */ |
| LWIP_ERROR("pbuf_copy_partial_pbuf: target not big enough", ((p_to != NULL) && |
| (p_to->tot_len >= (offset + copy_len))), return ERR_ARG;); |
| |
| /* iterate through pbuf chain */ |
| do { |
| /* copy one part of the original chain */ |
| if ((p_to->len - offset_to) >= (p_from->len - offset_from)) { |
| /* complete current p_from fits into current p_to */ |
| len_calc = p_from->len - offset_from; |
| } else { |
| /* current p_from does not fit into current p_to */ |
| len_calc = p_to->len - offset_to; |
| } |
| len = (u16_t)LWIP_MIN(copy_len, len_calc); |
| MEMCPY((u8_t *)p_to->payload + offset_to, (u8_t *)p_from->payload + offset_from, len); |
| offset_to += len; |
| offset_from += len; |
| copy_len -= len; |
| LWIP_ASSERT("offset_to <= p_to->len", offset_to <= p_to->len); |
| LWIP_ASSERT("offset_from <= p_from->len", offset_from <= p_from->len); |
| if (offset_from >= p_from->len) { |
| /* on to next p_from (if any) */ |
| offset_from = 0; |
| p_from = p_from->next; |
| LWIP_ERROR("p_from != NULL", (p_from != NULL) || (copy_len == 0), return ERR_ARG;); |
| } |
| if (offset_to == p_to->len) { |
| /* on to next p_to (if any) */ |
| offset_to = 0; |
| p_to = p_to->next; |
| LWIP_ERROR("p_to != NULL", (p_to != NULL) || (copy_len == 0), return ERR_ARG;); |
| } |
| |
| if ((p_from != NULL) && (p_from->len == p_from->tot_len)) { |
| /* don't copy more than one packet! */ |
| LWIP_ERROR("pbuf_copy_partial_pbuf() does not allow packet queues!", |
| (p_from->next == NULL), return ERR_VAL;); |
| } |
| if ((p_to != NULL) && (p_to->len == p_to->tot_len)) { |
| /* don't copy more than one packet! */ |
| LWIP_ERROR("pbuf_copy_partial_pbuf() does not allow packet queues!", |
| (p_to->next == NULL), return ERR_VAL;); |
| } |
| } while (copy_len); |
| LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_copy_partial_pbuf: copy complete.\n")); |
| return ERR_OK; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Copy (part of) the contents of a packet buffer |
| * to an application supplied buffer. |
| * |
| * @param buf the pbuf from which to copy data |
| * @param dataptr the application supplied buffer |
| * @param len length of data to copy (dataptr must be big enough). No more |
| * than buf->tot_len will be copied, irrespective of len |
| * @param offset offset into the packet buffer from where to begin copying len bytes |
| * @return the number of bytes copied, or 0 on failure |
| */ |
| u16_t |
| pbuf_copy_partial(const struct pbuf *buf, void *dataptr, u16_t len, u16_t offset) |
| { |
| const struct pbuf *p; |
| u16_t left = 0; |
| u16_t buf_copy_len; |
| u16_t copied_total = 0; |
| |
| LWIP_ERROR("pbuf_copy_partial: invalid buf", (buf != NULL), return 0;); |
| LWIP_ERROR("pbuf_copy_partial: invalid dataptr", (dataptr != NULL), return 0;); |
| |
| /* Note some systems use byte copy if dataptr or one of the pbuf payload pointers are unaligned. */ |
| for (p = buf; len != 0 && p != NULL; p = p->next) { |
| if ((offset != 0) && (offset >= p->len)) { |
| /* don't copy from this buffer -> on to the next */ |
| offset = (u16_t)(offset - p->len); |
| } else { |
| /* copy from this buffer. maybe only partially. */ |
| buf_copy_len = (u16_t)(p->len - offset); |
| if (buf_copy_len > len) { |
| buf_copy_len = len; |
| } |
| /* copy the necessary parts of the buffer */ |
| MEMCPY(&((char *)dataptr)[left], &((char *)p->payload)[offset], buf_copy_len); |
| copied_total = (u16_t)(copied_total + buf_copy_len); |
| left = (u16_t)(left + buf_copy_len); |
| len = (u16_t)(len - buf_copy_len); |
| offset = 0; |
| } |
| } |
| return copied_total; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Get part of a pbuf's payload as contiguous memory. The returned memory is |
| * either a pointer into the pbuf's payload or, if split over multiple pbufs, |
| * a copy into the user-supplied buffer. |
| * |
| * @param p the pbuf from which to copy data |
| * @param buffer the application supplied buffer |
| * @param bufsize size of the application supplied buffer |
| * @param len length of data to copy (dataptr must be big enough). No more |
| * than buf->tot_len will be copied, irrespective of len |
| * @param offset offset into the packet buffer from where to begin copying len bytes |
| * @return the number of bytes copied, or 0 on failure |
| */ |
| void * |
| pbuf_get_contiguous(const struct pbuf *p, void *buffer, size_t bufsize, u16_t len, u16_t offset) |
| { |
| const struct pbuf *q; |
| u16_t out_offset; |
| |
| LWIP_ERROR("pbuf_get_contiguous: invalid buf", (p != NULL), return NULL;); |
| LWIP_ERROR("pbuf_get_contiguous: invalid dataptr", (buffer != NULL), return NULL;); |
| LWIP_ERROR("pbuf_get_contiguous: invalid dataptr", (bufsize >= len), return NULL;); |
| |
| q = pbuf_skip_const(p, offset, &out_offset); |
| if (q != NULL) { |
| if (q->len >= (out_offset + len)) { |
| /* all data in this pbuf, return zero-copy */ |
| return (u8_t *)q->payload + out_offset; |
| } |
| /* need to copy */ |
| if (pbuf_copy_partial(q, buffer, len, out_offset) != len) { |
| /* copying failed: pbuf is too short */ |
| return NULL; |
| } |
| return buffer; |
| } |
| /* pbuf is too short (offset does not fit in) */ |
| return NULL; |
| } |
| |
| #if LWIP_TCP && TCP_QUEUE_OOSEQ && LWIP_WND_SCALE |
| /** |
| * This method modifies a 'pbuf chain', so that its total length is |
| * smaller than 64K. The remainder of the original pbuf chain is stored |
| * in *rest. |
| * This function never creates new pbufs, but splits an existing chain |
| * in two parts. The tot_len of the modified packet queue will likely be |
| * smaller than 64K. |
| * 'packet queues' are not supported by this function. |
| * |
| * @param p the pbuf queue to be split |
| * @param rest pointer to store the remainder (after the first 64K) |
| */ |
| void pbuf_split_64k(struct pbuf *p, struct pbuf **rest) |
| { |
| *rest = NULL; |
| if ((p != NULL) && (p->next != NULL)) { |
| u16_t tot_len_front = p->len; |
| struct pbuf *i = p; |
| struct pbuf *r = p->next; |
| |
| /* continue until the total length (summed up as u16_t) overflows */ |
| while ((r != NULL) && ((u16_t)(tot_len_front + r->len) >= tot_len_front)) { |
| tot_len_front = (u16_t)(tot_len_front + r->len); |
| i = r; |
| r = r->next; |
| } |
| /* i now points to last packet of the first segment. Set next |
| pointer to NULL */ |
| i->next = NULL; |
| |
| if (r != NULL) { |
| /* Update the tot_len field in the first part */ |
| for (i = p; i != NULL; i = i->next) { |
| i->tot_len = (u16_t)(i->tot_len - r->tot_len); |
| LWIP_ASSERT("tot_len/len mismatch in last pbuf", |
| (i->next != NULL) || (i->tot_len == i->len)); |
| } |
| if (p->flags & PBUF_FLAG_TCP_FIN) { |
| r->flags |= PBUF_FLAG_TCP_FIN; |
| } |
| |
| /* tot_len field in rest does not need modifications */ |
| /* reference counters do not need modifications */ |
| *rest = r; |
| } |
| } |
| } |
| #endif /* LWIP_TCP && TCP_QUEUE_OOSEQ && LWIP_WND_SCALE */ |
| |
| /* Actual implementation of pbuf_skip() but returning const pointer... */ |
| static const struct pbuf * |
| pbuf_skip_const(const struct pbuf *in, u16_t in_offset, u16_t *out_offset) |
| { |
| u16_t offset_left = in_offset; |
| const struct pbuf *q = in; |
| |
| /* get the correct pbuf */ |
| while ((q != NULL) && (q->len <= offset_left)) { |
| offset_left = (u16_t)(offset_left - q->len); |
| q = q->next; |
| } |
| if (out_offset != NULL) { |
| *out_offset = offset_left; |
| } |
| return q; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Skip a number of bytes at the start of a pbuf |
| * |
| * @param in input pbuf |
| * @param in_offset offset to skip |
| * @param out_offset resulting offset in the returned pbuf |
| * @return the pbuf in the queue where the offset is |
| */ |
| struct pbuf * |
| pbuf_skip(struct pbuf *in, u16_t in_offset, u16_t *out_offset) |
| { |
| const struct pbuf *out = pbuf_skip_const(in, in_offset, out_offset); |
| return LWIP_CONST_CAST(struct pbuf *, out); |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Copy application supplied data into a pbuf. |
| * This function can only be used to copy the equivalent of buf->tot_len data. |
| * |
| * @param buf pbuf to fill with data |
| * @param dataptr application supplied data buffer |
| * @param len length of the application supplied data buffer |
| * |
| * @return ERR_OK if successful, ERR_MEM if the pbuf is not big enough |
| */ |
| err_t |
| pbuf_take(struct pbuf *buf, const void *dataptr, u16_t len) |
| { |
| struct pbuf *p; |
| size_t buf_copy_len; |
| size_t total_copy_len = len; |
| size_t copied_total = 0; |
| |
| LWIP_ERROR("pbuf_take: invalid buf", (buf != NULL), return ERR_ARG;); |
| LWIP_ERROR("pbuf_take: invalid dataptr", (dataptr != NULL), return ERR_ARG;); |
| LWIP_ERROR("pbuf_take: buf not large enough", (buf->tot_len >= len), return ERR_MEM;); |
| |
| if ((buf == NULL) || (dataptr == NULL) || (buf->tot_len < len)) { |
| return ERR_ARG; |
| } |
| |
| /* Note some systems use byte copy if dataptr or one of the pbuf payload pointers are unaligned. */ |
| for (p = buf; total_copy_len != 0; p = p->next) { |
| LWIP_ASSERT("pbuf_take: invalid pbuf", p != NULL); |
| buf_copy_len = total_copy_len; |
| if (buf_copy_len > p->len) { |
| /* this pbuf cannot hold all remaining data */ |
| buf_copy_len = p->len; |
| } |
| /* copy the necessary parts of the buffer */ |
| MEMCPY(p->payload, &((const char *)dataptr)[copied_total], buf_copy_len); |
| total_copy_len -= buf_copy_len; |
| copied_total += buf_copy_len; |
| } |
| LWIP_ASSERT("did not copy all data", total_copy_len == 0 && copied_total == len); |
| return ERR_OK; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Same as pbuf_take() but puts data at an offset |
| * |
| * @param buf pbuf to fill with data |
| * @param dataptr application supplied data buffer |
| * @param len length of the application supplied data buffer |
| * @param offset offset in pbuf where to copy dataptr to |
| * |
| * @return ERR_OK if successful, ERR_MEM if the pbuf is not big enough |
| */ |
| err_t |
| pbuf_take_at(struct pbuf *buf, const void *dataptr, u16_t len, u16_t offset) |
| { |
| u16_t target_offset; |
| struct pbuf *q = pbuf_skip(buf, offset, &target_offset); |
| |
| /* return requested data if pbuf is OK */ |
| if ((q != NULL) && (q->tot_len >= target_offset + len)) { |
| u16_t remaining_len = len; |
| const u8_t *src_ptr = (const u8_t *)dataptr; |
| /* copy the part that goes into the first pbuf */ |
| u16_t first_copy_len; |
| LWIP_ASSERT("check pbuf_skip result", target_offset < q->len); |
| first_copy_len = (u16_t)LWIP_MIN(q->len - target_offset, len); |
| MEMCPY(((u8_t *)q->payload) + target_offset, dataptr, first_copy_len); |
| remaining_len = (u16_t)(remaining_len - first_copy_len); |
| src_ptr += first_copy_len; |
| if (remaining_len > 0) { |
| return pbuf_take(q->next, src_ptr, remaining_len); |
| } |
| return ERR_OK; |
| } |
| return ERR_MEM; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Creates a single pbuf out of a queue of pbufs. |
| * |
| * @remark: Either the source pbuf 'p' is freed by this function or the original |
| * pbuf 'p' is returned, therefore the caller has to check the result! |
| * |
| * @param p the source pbuf |
| * @param layer pbuf_layer of the new pbuf |
| * |
| * @return a new, single pbuf (p->next is NULL) |
| * or the old pbuf if allocation fails |
| */ |
| struct pbuf * |
| pbuf_coalesce(struct pbuf *p, pbuf_layer layer) |
| { |
| struct pbuf *q; |
| if (p->next == NULL) { |
| return p; |
| } |
| q = pbuf_clone(layer, PBUF_RAM, p); |
| if (q == NULL) { |
| /* @todo: what do we do now? */ |
| return p; |
| } |
| pbuf_free(p); |
| return q; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Allocates a new pbuf of same length (via pbuf_alloc()) and copies the source |
| * pbuf into this new pbuf (using pbuf_copy()). |
| * |
| * @param layer pbuf_layer of the new pbuf |
| * @param type this parameter decides how and where the pbuf should be allocated |
| * (@see pbuf_alloc()) |
| * @param p the source pbuf |
| * |
| * @return a new pbuf or NULL if allocation fails |
| */ |
| struct pbuf * |
| pbuf_clone(pbuf_layer layer, pbuf_type type, struct pbuf *p) |
| { |
| struct pbuf *q; |
| err_t err; |
| q = pbuf_alloc(layer, p->tot_len, type); |
| if (q == NULL) { |
| return NULL; |
| } |
| err = pbuf_copy(q, p); |
| LWIP_UNUSED_ARG(err); /* in case of LWIP_NOASSERT */ |
| LWIP_ASSERT("pbuf_copy failed", err == ERR_OK); |
| return q; |
| } |
| |
| #if LWIP_CHECKSUM_ON_COPY |
| /** |
| * Copies data into a single pbuf (*not* into a pbuf queue!) and updates |
| * the checksum while copying |
| * |
| * @param p the pbuf to copy data into |
| * @param start_offset offset of p->payload where to copy the data to |
| * @param dataptr data to copy into the pbuf |
| * @param len length of data to copy into the pbuf |
| * @param chksum pointer to the checksum which is updated |
| * @return ERR_OK if successful, another error if the data does not fit |
| * within the (first) pbuf (no pbuf queues!) |
| */ |
| err_t |
| pbuf_fill_chksum(struct pbuf *p, u16_t start_offset, const void *dataptr, |
| u16_t len, u16_t *chksum) |
| { |
| u32_t acc; |
| u16_t copy_chksum; |
| char *dst_ptr; |
| LWIP_ASSERT("p != NULL", p != NULL); |
| LWIP_ASSERT("dataptr != NULL", dataptr != NULL); |
| LWIP_ASSERT("chksum != NULL", chksum != NULL); |
| LWIP_ASSERT("len != 0", len != 0); |
| |
| if ((start_offset >= p->len) || (start_offset + len > p->len)) { |
| return ERR_ARG; |
| } |
| |
| dst_ptr = ((char *)p->payload) + start_offset; |
| copy_chksum = LWIP_CHKSUM_COPY(dst_ptr, dataptr, len); |
| if ((start_offset & 1) != 0) { |
| copy_chksum = SWAP_BYTES_IN_WORD(copy_chksum); |
| } |
| acc = *chksum; |
| acc += copy_chksum; |
| *chksum = FOLD_U32T(acc); |
| return ERR_OK; |
| } |
| #endif /* LWIP_CHECKSUM_ON_COPY */ |
| |
| /** |
| * @ingroup pbuf |
| * Get one byte from the specified position in a pbuf |
| * WARNING: returns zero for offset >= p->tot_len |
| * |
| * @param p pbuf to parse |
| * @param offset offset into p of the byte to return |
| * @return byte at an offset into p OR ZERO IF 'offset' >= p->tot_len |
| */ |
| u8_t |
| pbuf_get_at(const struct pbuf *p, u16_t offset) |
| { |
| int ret = pbuf_try_get_at(p, offset); |
| if (ret >= 0) { |
| return (u8_t)ret; |
| } |
| return 0; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Get one byte from the specified position in a pbuf |
| * |
| * @param p pbuf to parse |
| * @param offset offset into p of the byte to return |
| * @return byte at an offset into p [0..0xFF] OR negative if 'offset' >= p->tot_len |
| */ |
| int |
| pbuf_try_get_at(const struct pbuf *p, u16_t offset) |
| { |
| u16_t q_idx; |
| const struct pbuf *q = pbuf_skip_const(p, offset, &q_idx); |
| |
| /* return requested data if pbuf is OK */ |
| if ((q != NULL) && (q->len > q_idx)) { |
| return ((u8_t *)q->payload)[q_idx]; |
| } |
| return -1; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Put one byte to the specified position in a pbuf |
| * WARNING: silently ignores offset >= p->tot_len |
| * |
| * @param p pbuf to fill |
| * @param offset offset into p of the byte to write |
| * @param data byte to write at an offset into p |
| */ |
| void |
| pbuf_put_at(struct pbuf *p, u16_t offset, u8_t data) |
| { |
| u16_t q_idx; |
| struct pbuf *q = pbuf_skip(p, offset, &q_idx); |
| |
| /* write requested data if pbuf is OK */ |
| if ((q != NULL) && (q->len > q_idx)) { |
| ((u8_t *)q->payload)[q_idx] = data; |
| } |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Compare pbuf contents at specified offset with memory s2, both of length n |
| * |
| * @param p pbuf to compare |
| * @param offset offset into p at which to start comparing |
| * @param s2 buffer to compare |
| * @param n length of buffer to compare |
| * @return zero if equal, nonzero otherwise |
| * (0xffff if p is too short, diffoffset+1 otherwise) |
| */ |
| u16_t |
| pbuf_memcmp(const struct pbuf *p, u16_t offset, const void *s2, u16_t n) |
| { |
| u16_t start = offset; |
| const struct pbuf *q = p; |
| u16_t i; |
| |
| /* pbuf long enough to perform check? */ |
| if (p->tot_len < (offset + n)) { |
| return 0xffff; |
| } |
| |
| /* get the correct pbuf from chain. We know it succeeds because of p->tot_len check above. */ |
| while ((q != NULL) && (q->len <= start)) { |
| start = (u16_t)(start - q->len); |
| q = q->next; |
| } |
| |
| /* return requested data if pbuf is OK */ |
| for (i = 0; i < n; i++) { |
| /* We know pbuf_get_at() succeeds because of p->tot_len check above. */ |
| u8_t a = pbuf_get_at(q, (u16_t)(start + i)); |
| u8_t b = ((const u8_t *)s2)[i]; |
| if (a != b) { |
| return (u16_t)LWIP_MIN(i + 1, 0xFFFF); |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * @ingroup pbuf |
| * Find occurrence of mem (with length mem_len) in pbuf p, starting at offset |
| * start_offset. |
| * |
| * @param p pbuf to search, maximum length is 0xFFFE since 0xFFFF is used as |
| * return value 'not found' |
| * @param mem search for the contents of this buffer |
| * @param mem_len length of 'mem' |
| * @param start_offset offset into p at which to start searching |
| * @return 0xFFFF if substr was not found in p or the index where it was found |
| */ |
| u16_t |
| pbuf_memfind(const struct pbuf *p, const void *mem, u16_t mem_len, u16_t start_offset) |
| { |
| u16_t i; |
| u16_t max_cmp_start = (u16_t)(p->tot_len - mem_len); |
| if (p->tot_len >= mem_len + start_offset) { |
| for (i = start_offset; i <= max_cmp_start; i++) { |
| u16_t plus = pbuf_memcmp(p, i, mem, mem_len); |
| if (plus == 0) { |
| return i; |
| } |
| } |
| } |
| return 0xFFFF; |
| } |
| |
| /** |
| * Find occurrence of substr with length substr_len in pbuf p, start at offset |
| * start_offset |
| * WARNING: in contrast to strstr(), this one does not stop at the first \0 in |
| * the pbuf/source string! |
| * |
| * @param p pbuf to search, maximum length is 0xFFFE since 0xFFFF is used as |
| * return value 'not found' |
| * @param substr string to search for in p, maximum length is 0xFFFE |
| * @return 0xFFFF if substr was not found in p or the index where it was found |
| */ |
| u16_t |
| pbuf_strstr(const struct pbuf *p, const char *substr) |
| { |
| size_t substr_len; |
| if ((substr == NULL) || (substr[0] == 0) || (p->tot_len == 0xFFFF)) { |
| return 0xFFFF; |
| } |
| substr_len = strlen(substr); |
| if (substr_len >= 0xFFFF) { |
| return 0xFFFF; |
| } |
| return pbuf_memfind(p, substr, (u16_t)substr_len, 0); |
| } |