| /** |
| ****************************************************************************** |
| * @file stm32f0xx_hal_pcd.h |
| * @author MCD Application Team |
| * @brief Header file of PCD HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F0xx_HAL_PCD_H |
| #define STM32F0xx_HAL_PCD_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f0xx_ll_usb.h" |
| |
| #if defined (USB) |
| |
| /** @addtogroup STM32F0xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup PCD |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup PCD_Exported_Types PCD Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief PCD State structure definition |
| */ |
| typedef enum |
| { |
| HAL_PCD_STATE_RESET = 0x00, |
| HAL_PCD_STATE_READY = 0x01, |
| HAL_PCD_STATE_ERROR = 0x02, |
| HAL_PCD_STATE_BUSY = 0x03, |
| HAL_PCD_STATE_TIMEOUT = 0x04 |
| } PCD_StateTypeDef; |
| |
| /* Device LPM suspend state */ |
| typedef enum |
| { |
| LPM_L0 = 0x00, /* on */ |
| LPM_L1 = 0x01, /* LPM L1 sleep */ |
| LPM_L2 = 0x02, /* suspend */ |
| LPM_L3 = 0x03, /* off */ |
| } PCD_LPM_StateTypeDef; |
| |
| typedef enum |
| { |
| PCD_LPM_L0_ACTIVE = 0x00, /* on */ |
| PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ |
| } PCD_LPM_MsgTypeDef; |
| |
| typedef enum |
| { |
| PCD_BCD_ERROR = 0xFF, |
| PCD_BCD_CONTACT_DETECTION = 0xFE, |
| PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, |
| PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, |
| PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, |
| PCD_BCD_DISCOVERY_COMPLETED = 0x00, |
| |
| } PCD_BCD_MsgTypeDef; |
| |
| |
| |
| |
| |
| typedef USB_TypeDef PCD_TypeDef; |
| typedef USB_CfgTypeDef PCD_InitTypeDef; |
| typedef USB_EPTypeDef PCD_EPTypeDef; |
| |
| |
| /** |
| * @brief PCD Handle Structure definition |
| */ |
| #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) |
| typedef struct __PCD_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ |
| { |
| PCD_TypeDef *Instance; /*!< Register base address */ |
| PCD_InitTypeDef Init; /*!< PCD required parameters */ |
| __IO uint8_t USB_Address; /*!< USB Address */ |
| PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ |
| PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ |
| HAL_LockTypeDef Lock; /*!< PCD peripheral status */ |
| __IO PCD_StateTypeDef State; /*!< PCD communication state */ |
| __IO uint32_t ErrorCode; /*!< PCD Error code */ |
| uint32_t Setup[12]; /*!< Setup packet buffer */ |
| PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ |
| uint32_t BESL; |
| |
| |
| uint32_t lpm_active; /*!< Enable or disable the Link Power Management . |
| This parameter can be set to ENABLE or DISABLE */ |
| |
| uint32_t battery_charging_active; /*!< Enable or disable Battery charging. |
| This parameter can be set to ENABLE or DISABLE */ |
| void *pData; /*!< Pointer to upper stack Handler */ |
| |
| #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) |
| void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ |
| void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ |
| void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ |
| void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ |
| void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ |
| void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ |
| void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ |
| |
| void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ |
| void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ |
| void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ |
| void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ |
| void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ |
| void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ |
| |
| void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ |
| void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ |
| #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ |
| } PCD_HandleTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| /* Include PCD HAL Extended module */ |
| #include "stm32f0xx_hal_pcd_ex.h" |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup PCD_Exported_Constants PCD Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup PCD_Speed PCD Speed |
| * @{ |
| */ |
| #define PCD_SPEED_FULL USBD_FS_SPEED |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PCD_PHY_Module PCD PHY Module |
| * @{ |
| */ |
| #define PCD_PHY_ULPI 1U |
| #define PCD_PHY_EMBEDDED 2U |
| #define PCD_PHY_UTMI 3U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PCD_Error_Code_definition PCD Error Code definition |
| * @brief PCD Error Code definition |
| * @{ |
| */ |
| #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) |
| #define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ |
| #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup PCD_Exported_Macros PCD Exported Macros |
| * @brief macros to handle interrupts and specific clock configurations |
| * @{ |
| */ |
| |
| |
| #define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) |
| #define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) |
| #define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\ |
| & (__INTERRUPT__)) == (__INTERRUPT__)) |
| |
| #define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR)\ |
| &= (uint16_t)(~(__INTERRUPT__))) |
| |
| #define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE |
| #define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup PCD_Exported_Functions PCD Exported Functions |
| * @{ |
| */ |
| |
| /* Initialization/de-initialization functions ********************************/ |
| /** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); |
| HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); |
| |
| #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) |
| /** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition |
| * @brief HAL USB OTG PCD Callback ID enumeration definition |
| * @{ |
| */ |
| typedef enum |
| { |
| HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ |
| HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ |
| HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ |
| HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ |
| HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ |
| HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ |
| HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ |
| |
| HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ |
| HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ |
| |
| } HAL_PCD_CallbackIDTypeDef; |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition |
| * @brief HAL USB OTG PCD Callback pointer definition |
| * @{ |
| */ |
| |
| typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ |
| typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ |
| typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ |
| typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ |
| typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ |
| typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ |
| typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ |
| |
| /** |
| * @} |
| */ |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, |
| HAL_PCD_CallbackIDTypeDef CallbackID, |
| pPCD_CallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, |
| HAL_PCD_CallbackIDTypeDef CallbackID); |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, |
| pPCD_DataOutStageCallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, |
| pPCD_DataInStageCallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, |
| pPCD_IsoOutIncpltCallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, |
| pPCD_IsoInIncpltCallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, |
| pPCD_BcdCallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); |
| |
| HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, |
| pPCD_LpmCallbackTypeDef pCallback); |
| |
| HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); |
| #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /* I/O operation functions ***************************************************/ |
| /* Non-Blocking mode: Interrupt */ |
| /** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); |
| HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); |
| |
| void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); |
| void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); |
| |
| void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); |
| void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); |
| void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); |
| void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); |
| /** |
| * @} |
| */ |
| |
| /* Peripheral Control functions **********************************************/ |
| /** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); |
| HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); |
| HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); |
| HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, |
| uint16_t ep_mps, uint8_t ep_type); |
| |
| HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); |
| HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, |
| uint8_t *pBuf, uint32_t len); |
| |
| HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, |
| uint8_t *pBuf, uint32_t len); |
| |
| |
| HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); |
| HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); |
| HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); |
| HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); |
| HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); |
| |
| uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); |
| /** |
| * @} |
| */ |
| |
| /* Peripheral State functions ************************************************/ |
| /** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions |
| * @{ |
| */ |
| PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup PCD_Private_Constants PCD Private Constants |
| * @{ |
| */ |
| /** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt |
| * @{ |
| */ |
| |
| |
| #define USB_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PCD_EP0_MPS PCD EP0 MPS |
| * @{ |
| */ |
| #define PCD_EP0MPS_64 EP_MPS_64 |
| #define PCD_EP0MPS_32 EP_MPS_32 |
| #define PCD_EP0MPS_16 EP_MPS_16 |
| #define PCD_EP0MPS_08 EP_MPS_8 |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PCD_ENDP PCD ENDP |
| * @{ |
| */ |
| #define PCD_ENDP0 0U |
| #define PCD_ENDP1 1U |
| #define PCD_ENDP2 2U |
| #define PCD_ENDP3 3U |
| #define PCD_ENDP4 4U |
| #define PCD_ENDP5 5U |
| #define PCD_ENDP6 6U |
| #define PCD_ENDP7 7U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PCD_ENDP_Kind PCD Endpoint Kind |
| * @{ |
| */ |
| #define PCD_SNG_BUF 0U |
| #define PCD_DBL_BUF 1U |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup PCD_Private_Macros PCD Private Macros |
| * @{ |
| */ |
| |
| /******************** Bit definition for USB_COUNTn_RX register *************/ |
| #define USB_CNTRX_NBLK_MSK (0x1FU << 10) |
| #define USB_CNTRX_BLSIZE (0x1U << 15) |
| |
| /* SetENDPOINT */ |
| #define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)\ |
| (&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue)) |
| |
| /* GetENDPOINT */ |
| #define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) |
| |
| /* ENDPOINT transfer */ |
| #define USB_EP0StartXfer USB_EPStartXfer |
| |
| /** |
| * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wType Endpoint Type. |
| * @retval None |
| */ |
| #define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum))\ |
| & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) |
| |
| |
| /** |
| * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval Endpoint Type |
| */ |
| #define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) |
| |
| /** |
| * @brief free buffer used from the application realizing it to the line |
| * toggles bit SW_BUF in the double buffered endpoint register |
| * @param USBx USB device. |
| * @param bEpNum, bDir |
| * @retval None |
| */ |
| #define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \ |
| do { \ |
| if ((bDir) == 0U) \ |
| { \ |
| /* OUT double buffered endpoint */ \ |
| PCD_TX_DTOG((USBx), (bEpNum)); \ |
| } \ |
| else if ((bDir) == 1U) \ |
| { \ |
| /* IN double buffered endpoint */ \ |
| PCD_RX_DTOG((USBx), (bEpNum)); \ |
| } \ |
| } while(0) |
| |
| /** |
| * @brief sets the status for tx transfer (bits STAT_TX[1:0]). |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wState new state |
| * @retval None |
| */ |
| #define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \ |
| /* toggle first bit ? */ \ |
| if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPTX_DTOG1; \ |
| } \ |
| /* toggle second bit ? */ \ |
| if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPTX_DTOG2; \ |
| } \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ |
| } while(0) /* PCD_SET_EP_TX_STATUS */ |
| |
| /** |
| * @brief sets the status for rx transfer (bits STAT_TX[1:0]) |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wState new state |
| * @retval None |
| */ |
| #define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \ |
| /* toggle first bit ? */ \ |
| if ((USB_EPRX_DTOG1 & (wState))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPRX_DTOG1; \ |
| } \ |
| /* toggle second bit ? */ \ |
| if ((USB_EPRX_DTOG2 & (wState))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPRX_DTOG2; \ |
| } \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ |
| } while(0) /* PCD_SET_EP_RX_STATUS */ |
| |
| /** |
| * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wStaterx new state. |
| * @param wStatetx new state. |
| * @retval None |
| */ |
| #define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \ |
| /* toggle first bit ? */ \ |
| if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPRX_DTOG1; \ |
| } \ |
| /* toggle second bit ? */ \ |
| if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPRX_DTOG2; \ |
| } \ |
| /* toggle first bit ? */ \ |
| if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPTX_DTOG1; \ |
| } \ |
| /* toggle second bit ? */ \ |
| if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \ |
| { \ |
| _wRegVal ^= USB_EPTX_DTOG2; \ |
| } \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ |
| } while(0) /* PCD_SET_EP_TXRX_STATUS */ |
| |
| /** |
| * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] |
| * /STAT_RX[1:0]) |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval status |
| */ |
| #define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) |
| #define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) |
| |
| /** |
| * @brief sets directly the VALID tx/rx-status into the endpoint register |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) |
| #define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) |
| |
| /** |
| * @brief checks stall condition in an endpoint. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval TRUE = endpoint in stall condition. |
| */ |
| #define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) == USB_EP_TX_STALL) |
| #define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) == USB_EP_RX_STALL) |
| |
| /** |
| * @brief set & clear EP_KIND bit. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_SET_EP_KIND(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \ |
| } while(0) /* PCD_SET_EP_KIND */ |
| |
| #define PCD_CLEAR_EP_KIND(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ |
| } while(0) /* PCD_CLEAR_EP_KIND */ |
| |
| /** |
| * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) |
| #define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) |
| |
| /** |
| * @brief Sets/clears directly EP_KIND bit in the endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_SET_BULK_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) |
| #define PCD_CLEAR_BULK_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) |
| |
| /** |
| * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \ |
| } while(0) /* PCD_CLEAR_RX_EP_CTR */ |
| |
| #define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \ |
| } while(0) /* PCD_CLEAR_TX_EP_CTR */ |
| |
| /** |
| * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_RX_DTOG(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wEPVal; \ |
| \ |
| _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \ |
| } while(0) /* PCD_RX_DTOG */ |
| |
| #define PCD_TX_DTOG(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wEPVal; \ |
| \ |
| _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \ |
| } while(0) /* PCD_TX_DTOG */ |
| /** |
| * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ |
| \ |
| if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\ |
| { \ |
| PCD_RX_DTOG((USBx), (bEpNum)); \ |
| } \ |
| } while(0) /* PCD_CLEAR_RX_DTOG */ |
| |
| #define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ |
| \ |
| if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\ |
| { \ |
| PCD_TX_DTOG((USBx), (bEpNum)); \ |
| } \ |
| } while(0) /* PCD_CLEAR_TX_DTOG */ |
| |
| /** |
| * @brief Sets address in an endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param bAddr Address. |
| * @retval None |
| */ |
| #define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \ |
| do { \ |
| uint16_t _wRegVal; \ |
| \ |
| _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \ |
| \ |
| PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ |
| } while(0) /* PCD_SET_EP_ADDRESS */ |
| |
| /** |
| * @brief Gets address in an endpoint register. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) |
| |
| #define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE\ |
| + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) |
| |
| #define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE\ |
| + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) |
| |
| |
| /** |
| * @brief sets address of the tx/rx buffer. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wAddr address to be set (must be word aligned). |
| * @retval None |
| */ |
| #define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \ |
| do { \ |
| __IO uint16_t *_wRegVal; \ |
| uint32_t _wRegBase = (uint32_t)USBx; \ |
| \ |
| _wRegBase += (uint32_t)(USBx)->BTABLE; \ |
| _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ |
| *_wRegVal = ((wAddr) >> 1) << 1; \ |
| } while(0) /* PCD_SET_EP_TX_ADDRESS */ |
| |
| #define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \ |
| do { \ |
| __IO uint16_t *_wRegVal; \ |
| uint32_t _wRegBase = (uint32_t)USBx; \ |
| \ |
| _wRegBase += (uint32_t)(USBx)->BTABLE; \ |
| _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ |
| *_wRegVal = ((wAddr) >> 1) << 1; \ |
| } while(0) /* PCD_SET_EP_RX_ADDRESS */ |
| |
| /** |
| * @brief Gets address of the tx/rx buffer. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval address of the buffer. |
| */ |
| #define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) |
| #define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) |
| |
| /** |
| * @brief Sets counter of rx buffer with no. of blocks. |
| * @param pdwReg Register pointer |
| * @param wCount Counter. |
| * @param wNBlocks no. of Blocks. |
| * @retval None |
| */ |
| #define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ |
| do { \ |
| (wNBlocks) = (wCount) >> 5; \ |
| if (((wCount) & 0x1fU) == 0U) \ |
| { \ |
| (wNBlocks)--; \ |
| } \ |
| *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \ |
| } while(0) /* PCD_CALC_BLK32 */ |
| |
| #define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ |
| do { \ |
| (wNBlocks) = (wCount) >> 1; \ |
| if (((wCount) & 0x1U) != 0U) \ |
| { \ |
| (wNBlocks)++; \ |
| } \ |
| *(pdwReg) = (uint16_t)((wNBlocks) << 10); \ |
| } while(0) /* PCD_CALC_BLK2 */ |
| |
| #define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \ |
| do { \ |
| uint32_t wNBlocks; \ |
| if ((wCount) == 0U) \ |
| { \ |
| *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \ |
| *(pdwReg) |= USB_CNTRX_BLSIZE; \ |
| } \ |
| else if((wCount) <= 62U) \ |
| { \ |
| PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ |
| } \ |
| else \ |
| { \ |
| PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ |
| } \ |
| } while(0) /* PCD_SET_EP_CNT_RX_REG */ |
| |
| #define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \ |
| do { \ |
| uint32_t _wRegBase = (uint32_t)(USBx); \ |
| __IO uint16_t *pdwReg; \ |
| \ |
| _wRegBase += (uint32_t)(USBx)->BTABLE; \ |
| pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ |
| PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \ |
| } while(0) |
| |
| /** |
| * @brief sets counter for the tx/rx buffer. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wCount Counter value. |
| * @retval None |
| */ |
| #define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \ |
| do { \ |
| uint32_t _wRegBase = (uint32_t)(USBx); \ |
| __IO uint16_t *_wRegVal; \ |
| \ |
| _wRegBase += (uint32_t)(USBx)->BTABLE; \ |
| _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ |
| *_wRegVal = (uint16_t)(wCount); \ |
| } while(0) |
| |
| #define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \ |
| do { \ |
| uint32_t _wRegBase = (uint32_t)(USBx); \ |
| __IO uint16_t *_wRegVal; \ |
| \ |
| _wRegBase += (uint32_t)(USBx)->BTABLE; \ |
| _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ |
| PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \ |
| } while(0) |
| |
| /** |
| * @brief gets counter of the tx buffer. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval Counter value |
| */ |
| #define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU) |
| #define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU) |
| |
| /** |
| * @brief Sets buffer 0/1 address in a double buffer endpoint. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wBuf0Addr buffer 0 address. |
| * @retval Counter value |
| */ |
| #define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \ |
| do { \ |
| PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \ |
| } while(0) /* PCD_SET_EP_DBUF0_ADDR */ |
| |
| #define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \ |
| do { \ |
| PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \ |
| } while(0) /* PCD_SET_EP_DBUF1_ADDR */ |
| |
| /** |
| * @brief Sets addresses in a double buffer endpoint. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param wBuf0Addr: buffer 0 address. |
| * @param wBuf1Addr = buffer 1 address. |
| * @retval None |
| */ |
| #define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \ |
| do { \ |
| PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \ |
| PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \ |
| } while(0) /* PCD_SET_EP_DBUF_ADDR */ |
| |
| /** |
| * @brief Gets buffer 0/1 address of a double buffer endpoint. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) |
| #define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) |
| |
| /** |
| * @brief Gets buffer 0/1 address of a double buffer endpoint. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @param bDir endpoint dir EP_DBUF_OUT = OUT |
| * EP_DBUF_IN = IN |
| * @param wCount: Counter value |
| * @retval None |
| */ |
| #define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \ |
| do { \ |
| if ((bDir) == 0U) \ |
| /* OUT endpoint */ \ |
| { \ |
| PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \ |
| } \ |
| else \ |
| { \ |
| if ((bDir) == 1U) \ |
| { \ |
| /* IN endpoint */ \ |
| PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \ |
| } \ |
| } \ |
| } while(0) /* SetEPDblBuf0Count*/ |
| |
| #define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \ |
| do { \ |
| uint32_t _wBase = (uint32_t)(USBx); \ |
| __IO uint16_t *_wEPRegVal; \ |
| \ |
| if ((bDir) == 0U) \ |
| { \ |
| /* OUT endpoint */ \ |
| PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \ |
| } \ |
| else \ |
| { \ |
| if ((bDir) == 1U) \ |
| { \ |
| /* IN endpoint */ \ |
| _wBase += (uint32_t)(USBx)->BTABLE; \ |
| _wEPRegVal = (__IO uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ |
| *_wEPRegVal = (uint16_t)(wCount); \ |
| } \ |
| } \ |
| } while(0) /* SetEPDblBuf1Count */ |
| |
| #define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \ |
| do { \ |
| PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ |
| PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ |
| } while(0) /* PCD_SET_EP_DBUF_CNT */ |
| |
| /** |
| * @brief Gets buffer 0/1 rx/tx counter for double buffering. |
| * @param USBx USB peripheral instance register address. |
| * @param bEpNum Endpoint Number. |
| * @retval None |
| */ |
| #define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) |
| #define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| #endif /* defined (USB) */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32F0xx_HAL_PCD_H */ |
