/**
  ******************************************************************************
  * @file    stm32f1xx_hal_cec.h
  * @author  MCD Application Team
  * @brief   Header file of CEC HAL module.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_CEC_H
#define __STM32F1xx_HAL_CEC_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"

#if defined (CEC)

/** @addtogroup STM32F1xx_HAL_Driver
  * @{
  */

/** @addtogroup CEC
  * @{
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup CEC_Exported_Types CEC Exported Types
  * @{
  */

/**
  * @brief CEC Init Structure definition
  */
typedef struct
{
  uint32_t  TimingErrorFree;             /*!< Configures the CEC Bit Timing Error Mode.
                                              This parameter can be a value of CEC_BitTimingErrorMode */

  uint32_t  PeriodErrorFree;             /*!< Configures the CEC Bit Period Error Mode.
                                              This parameter can be a value of CEC_BitPeriodErrorMode */

  uint16_t  OwnAddress;                  /*!< Own addresses configuration
                                              This parameter can be a value of @ref CEC_OWN_ADDRESS */

  uint8_t  *RxBuffer;                    /*!< CEC Rx buffer pointer */
} CEC_InitTypeDef;

/**
  * @brief HAL CEC State definition
  * @note  HAL CEC State value is a combination of 2 different substates: gState and RxState
           (see @ref CEC_State_Definition).
  *        - gState contains CEC state information related to global Handle management
  *          and also information related to Tx operations.
  *          gState value coding follow below described bitmap :
  *          b7 (not used)
  *             x  : Should be set to 0
  *          b6  Error information
  *             0  : No Error
  *             1  : Error
  *          b5     CEC peripheral initialization status
  *             0  : Reset (peripheral not initialized)
  *             1  : Init done (peripheral initialized. HAL CEC Init function already called)
  *          b4-b3  (not used)
  *             xx : Should be set to 00
  *          b2     Intrinsic process state
  *             0  : Ready
  *             1  : Busy (peripheral busy with some configuration or internal operations)
  *          b1     (not used)
  *             x  : Should be set to 0
  *          b0     Tx state
  *             0  : Ready (no Tx operation ongoing)
  *             1  : Busy (Tx operation ongoing)
  *        - RxState contains information related to Rx operations.
  *          RxState value coding follow below described bitmap :
  *          b7-b6  (not used)
  *             xx : Should be set to 00
  *          b5     CEC peripheral initialization status
  *             0  : Reset (peripheral not initialized)
  *             1  : Init done (peripheral initialized)
  *          b4-b2  (not used)
  *            xxx : Should be set to 000
  *          b1     Rx state
  *             0  : Ready (no Rx operation ongoing)
  *             1  : Busy (Rx operation ongoing)
  *          b0     (not used)
  *             x  : Should be set to 0.
  */
typedef enum
{
  HAL_CEC_STATE_RESET             = 0x00U,    /*!< Peripheral is not yet Initialized
                                                   Value is allowed for gState and RxState             */
  HAL_CEC_STATE_READY             = 0x20U,    /*!< Peripheral Initialized and ready for use
                                                   Value is allowed for gState and RxState             */
  HAL_CEC_STATE_BUSY              = 0x24U,    /*!< an internal process is ongoing
                                                   Value is allowed for gState only                    */
  HAL_CEC_STATE_BUSY_RX           = 0x22U,    /*!< Data Reception process is ongoing
                                                   Value is allowed for RxState only                   */
  HAL_CEC_STATE_BUSY_TX           = 0x21U,    /*!< Data Transmission process is ongoing
                                                   Value is allowed for gState only                    */
  HAL_CEC_STATE_BUSY_RX_TX        = 0x23U,    /*!< an internal process is ongoing
                                                   Value is allowed for gState only                    */
  HAL_CEC_STATE_ERROR             = 0x60U     /*!< Error Value is allowed for gState only              */
} HAL_CEC_StateTypeDef;

/**
  * @brief  CEC handle Structure definition
  */
typedef struct __CEC_HandleTypeDef
{
  CEC_TypeDef             *Instance;      /*!< CEC registers base address */

  CEC_InitTypeDef         Init;           /*!< CEC communication parameters */

  const uint8_t           *pTxBuffPtr;    /*!< Pointer to CEC Tx transfer Buffer */

  uint16_t                TxXferCount;    /*!< CEC Tx Transfer Counter */

  uint16_t                RxXferSize;     /*!< CEC Rx Transfer size, 0: header received only */

  HAL_LockTypeDef         Lock;           /*!< Locking object */

  HAL_CEC_StateTypeDef    gState;         /*!< CEC state information related to global Handle management
                                               and also related to Tx operations.
                                               This parameter can be a value of @ref HAL_CEC_StateTypeDef */

  HAL_CEC_StateTypeDef    RxState;        /*!< CEC state information related to Rx operations.
                                               This parameter can be a value of @ref HAL_CEC_StateTypeDef */

  uint32_t                ErrorCode;      /*!< For errors handling purposes, copy of ISR register
                                               in case error is reported */

#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
  void (* TxCpltCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Tx Transfer completed callback */
  void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec,
                          uint32_t RxFrameSize);          /*!< CEC Rx Transfer completed callback    */
  void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback                  */

  void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec);               /*!< CEC Msp Init callback              */
  void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec);             /*!< CEC Msp DeInit callback            */

#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */
} CEC_HandleTypeDef;

#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
/**
  * @brief  HAL CEC Callback ID enumeration definition
  */
typedef enum
{
  HAL_CEC_TX_CPLT_CB_ID      = 0x00U,    /*!< CEC Tx Transfer completed callback ID  */
  HAL_CEC_RX_CPLT_CB_ID      = 0x01U,    /*!< CEC Rx Transfer completed callback ID  */
  HAL_CEC_ERROR_CB_ID        = 0x02U,    /*!< CEC error callback ID                  */
  HAL_CEC_MSPINIT_CB_ID      = 0x03U,    /*!< CEC Msp Init callback ID               */
  HAL_CEC_MSPDEINIT_CB_ID    = 0x04U     /*!< CEC Msp DeInit callback ID             */
} HAL_CEC_CallbackIDTypeDef;

/**
  * @brief  HAL CEC Callback pointer definition
  */
typedef  void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec);  /*!< pointer to an CEC callback function */
typedef  void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec,
                                        uint32_t RxFrameSize);  /*!< pointer to an Rx Transfer completed
                                                                     callback function */
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup CEC_Exported_Constants CEC Exported Constants
  * @{
  */

/** @defgroup CEC_Error_Code CEC Error Code
  * @{
  */
#define HAL_CEC_ERROR_NONE   0x00000000U    /*!< no error */
#define HAL_CEC_ERROR_BTE    CEC_ESR_BTE    /*!< Bit Timing Error */
#define HAL_CEC_ERROR_BPE    CEC_ESR_BPE    /*!< Bit Period Error */
#define HAL_CEC_ERROR_RBTFE  CEC_ESR_RBTFE  /*!< Rx Block Transfer Finished Error */
#define HAL_CEC_ERROR_SBE    CEC_ESR_SBE    /*!< Start Bit Error */
#define HAL_CEC_ERROR_ACKE   CEC_ESR_ACKE   /*!< Block Acknowledge Error */
#define HAL_CEC_ERROR_LINE   CEC_ESR_LINE   /*!< Line Error */
#define HAL_CEC_ERROR_TBTFE  CEC_ESR_TBTFE  /*!< Tx Block Transfer Finished Error */
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
#define  HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback Error  */
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
/**
  * @}
  */

/** @defgroup CEC_BitTimingErrorMode Bit Timing Error Mode
  * @{
  */
#define CEC_BIT_TIMING_ERROR_MODE_STANDARD  0x00000000U      /*!< Bit timing error Standard Mode */
#define CEC_BIT_TIMING_ERROR_MODE_ERRORFREE CEC_CFGR_BTEM    /*!< Bit timing error Free Mode */
/**
  * @}
  */

/** @defgroup CEC_BitPeriodErrorMode Bit Period Error Mode
  * @{
  */
#define CEC_BIT_PERIOD_ERROR_MODE_STANDARD 0x00000000U      /*!< Bit period error Standard Mode */
#define CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE CEC_CFGR_BPEM    /*!< Bit period error Flexible Mode */
/**
  * @}
  */

/** @defgroup CEC_Initiator_Position   CEC Initiator logical address position in message header
  * @{
  */
#define CEC_INITIATOR_LSB_POS                  4U
/**
  * @}
  */

/** @defgroup CEC_OWN_ADDRESS   CEC Own Address
  * @{
  */
#define CEC_OWN_ADDRESS_NONE            CEC_OWN_ADDRESS_0    /* Reset value */
#define CEC_OWN_ADDRESS_0              ((uint16_t)0x0000U)   /* Logical Address 0 */
#define CEC_OWN_ADDRESS_1              ((uint16_t)0x0001U)   /* Logical Address 1 */
#define CEC_OWN_ADDRESS_2              ((uint16_t)0x0002U)   /* Logical Address 2 */
#define CEC_OWN_ADDRESS_3              ((uint16_t)0x0003U)   /* Logical Address 3 */
#define CEC_OWN_ADDRESS_4              ((uint16_t)0x0004U)   /* Logical Address 4 */
#define CEC_OWN_ADDRESS_5              ((uint16_t)0x0005U)   /* Logical Address 5 */
#define CEC_OWN_ADDRESS_6              ((uint16_t)0x0006U)   /* Logical Address 6 */
#define CEC_OWN_ADDRESS_7              ((uint16_t)0x0007U)   /* Logical Address 7 */
#define CEC_OWN_ADDRESS_8              ((uint16_t)0x0008U)   /* Logical Address 8 */
#define CEC_OWN_ADDRESS_9              ((uint16_t)0x0009U)   /* Logical Address 9 */
#define CEC_OWN_ADDRESS_10             ((uint16_t)0x000AU)   /* Logical Address 10 */
#define CEC_OWN_ADDRESS_11             ((uint16_t)0x000BU)   /* Logical Address 11 */
#define CEC_OWN_ADDRESS_12             ((uint16_t)0x000CU)   /* Logical Address 12 */
#define CEC_OWN_ADDRESS_13             ((uint16_t)0x000DU)   /* Logical Address 13 */
#define CEC_OWN_ADDRESS_14             ((uint16_t)0x000EU)   /* Logical Address 14 */
#define CEC_OWN_ADDRESS_15             ((uint16_t)0x000FU)   /* Logical Address 15 */
/**
  * @}
  */

/** @defgroup CEC_Interrupts_Definitions  Interrupts definition
  * @{
  */
#define CEC_IT_IE CEC_CFGR_IE
/**
  * @}
  */

/** @defgroup CEC_Flags_Definitions  Flags definition
  * @{
  */
#define CEC_FLAG_TSOM  CEC_CSR_TSOM
#define CEC_FLAG_TEOM  CEC_CSR_TEOM
#define CEC_FLAG_TERR  CEC_CSR_TERR
#define CEC_FLAG_TBTRF CEC_CSR_TBTRF
#define CEC_FLAG_RSOM  CEC_CSR_RSOM
#define CEC_FLAG_REOM  CEC_CSR_REOM
#define CEC_FLAG_RERR  CEC_CSR_RERR
#define CEC_FLAG_RBTF  CEC_CSR_RBTF
/**
  * @}
  */

/**
  * @}
  */

/* Exported macros -----------------------------------------------------------*/
/** @defgroup CEC_Exported_Macros CEC Exported Macros
  * @{
  */

/** @brief  Reset CEC handle gstate & RxState
  * @param  __HANDLE__ CEC handle.
  * @retval None
  */
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{                                                   \
                                                       (__HANDLE__)->gState = HAL_CEC_STATE_RESET;     \
                                                       (__HANDLE__)->RxState = HAL_CEC_STATE_RESET;    \
                                                       (__HANDLE__)->MspInitCallback = NULL;           \
                                                       (__HANDLE__)->MspDeInitCallback = NULL;         \
                                                     } while(0)
#else
#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{                                                   \
                                                       (__HANDLE__)->gState = HAL_CEC_STATE_RESET;     \
                                                       (__HANDLE__)->RxState = HAL_CEC_STATE_RESET;    \
                                                     } while(0)
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */

/** @brief  Checks whether or not the specified CEC interrupt flag is set.
  * @param  __HANDLE__ specifies the CEC Handle.
  * @param  __FLAG__ specifies the flag to check.
  *     @arg CEC_FLAG_TERR: Tx Error
  *     @arg CEC_FLAG_TBTRF:Tx Block Transfer Finished
  *     @arg CEC_FLAG_RERR: Rx Error
  *     @arg CEC_FLAG_RBTF: Rx Block Transfer Finished
  * @retval ITStatus
  */
#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) READ_BIT((__HANDLE__)->Instance->CSR,(__FLAG__))

/** @brief  Clears the CEC's pending flags.
  * @param  __HANDLE__ specifies the CEC Handle.
  * @param  __FLAG__ specifies the flag to clear.
  *   This parameter can be any combination of the following values:
  *     @arg CEC_CSR_TERR: Tx Error
  *     @arg CEC_FLAG_TBTRF: Tx Block Transfer Finished
  *     @arg CEC_CSR_RERR: Rx Error
  *     @arg CEC_CSR_RBTF: Rx Block Transfer Finished
  * @retval none
  */
#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__)                                                                   \
  do {                                                                                       \
    uint32_t tmp = 0x0U;                                                                     \
    tmp = (__HANDLE__)->Instance->CSR & 0x00000002U;                                         \
    (__HANDLE__)->Instance->CSR &= (uint32_t)(((~(uint32_t)(__FLAG__)) & 0xFFFFFFFCU) | tmp);\
  } while(0U)

/** @brief  Enables the specified CEC interrupt.
  * @param  __HANDLE__ specifies the CEC Handle.
  * @param  __INTERRUPT__ specifies the CEC interrupt to enable.
  *          This parameter can be one of the following values:
  *            @arg CEC_IT_IE         : Interrupt Enable.
  * @retval none
  */
#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))

/** @brief  Disables the specified CEC interrupt.
  * @param  __HANDLE__ specifies the CEC Handle.
  * @param  __INTERRUPT__ specifies the CEC interrupt to disable.
  *          This parameter can be one of the following values:
  *            @arg CEC_IT_IE         : Interrupt Enable
  * @retval none
  */
#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))

/** @brief  Checks whether or not the specified CEC interrupt is enabled.
  * @param  __HANDLE__ specifies the CEC Handle.
  * @param  __INTERRUPT__ specifies the CEC interrupt to check.
  *          This parameter can be one of the following values:
  *            @arg CEC_IT_IE         : Interrupt Enable
  * @retval FlagStatus
  */
#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) READ_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))

/** @brief  Enables the CEC device
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval none
  */
#define __HAL_CEC_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)

/** @brief  Disables the CEC device
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval none
  */
#define __HAL_CEC_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)

/** @brief  Set Transmission Start flag
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval none
  */
#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)

/** @brief  Set Transmission End flag
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval none
  */
#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)

/** @brief  Get Transmission Start flag
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval FlagStatus
  */
#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)

/** @brief  Get Transmission End flag
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval FlagStatus
  */
#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)

/** @brief  Clear OAR register
  * @param  __HANDLE__ specifies the CEC Handle.
  * @retval none
  */
#define __HAL_CEC_CLEAR_OAR(__HANDLE__)   CLEAR_BIT((__HANDLE__)->Instance->OAR, CEC_OAR_OA)

/** @brief  Set OAR register
  * @param  __HANDLE__ specifies the CEC Handle.
  * @param  __ADDRESS__ Own Address value.
  * @retval none
  */
#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) MODIFY_REG((__HANDLE__)->Instance->OAR, CEC_OAR_OA, (__ADDRESS__));

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @addtogroup CEC_Exported_Functions CEC Exported Functions
  * @{
  */

/** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
  *  @brief    Initialization and Configuration functions
  * @{
  */
/* Initialization and de-initialization functions  ****************************/
HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);

#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID,
                                           pCEC_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);

HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
/**
  * @}
  */

/** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions
  *  @brief CEC Transmit/Receive functions
  * @{
  */
/* I/O operation functions  ***************************************************/
HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress,
                                      const uint8_t *pData, uint32_t Size);
uint32_t HAL_CEC_GetLastReceivedFrameSize(const CEC_HandleTypeDef *hcec);
void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer);
void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
/**
  * @}
  */

/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions
  *  @brief   CEC control functions
  * @{
  */
/* Peripheral State functions  ************************************************/
HAL_CEC_StateTypeDef HAL_CEC_GetState(const CEC_HandleTypeDef *hcec);
uint32_t HAL_CEC_GetError(const CEC_HandleTypeDef *hcec);
/**
  * @}
  */

/**
  * @}
  */

/* Private types -------------------------------------------------------------*/
/** @defgroup CEC_Private_Types CEC Private Types
  * @{
  */

/**
  * @}
  */

/* Private variables ---------------------------------------------------------*/
/** @defgroup CEC_Private_Variables CEC Private Variables
  * @{
  */

/**
  * @}
  */

/* Private constants ---------------------------------------------------------*/
/** @defgroup CEC_Private_Constants CEC Private Constants
  * @{
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup CEC_Private_Macros CEC Private Macros
  * @{
  */
#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BIT_TIMING_ERROR_MODE_STANDARD) || \
                                            ((MODE) == CEC_BIT_TIMING_ERROR_MODE_ERRORFREE))

#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BIT_PERIOD_ERROR_MODE_STANDARD) || \
                                            ((MODE) == CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE))

/** @brief Check CEC message size.
  *       The message size is the payload size: without counting the header,
  *       it varies from 0 byte (ping operation, one header only, no payload) to
  *       15 bytes (1 opcode and up to 14 operands following the header).
  * @param  __SIZE__ CEC message size.
  * @retval Test result (TRUE or FALSE).
  */
#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)

/** @brief Check CEC device Own Address Register (OAR) setting.
  * @param  __ADDRESS__ CEC own address.
  * @retval Test result (TRUE or FALSE).
  */
#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)

/** @brief Check CEC initiator or destination logical address setting.
  *        Initiator and destination addresses are coded over 4 bits.
  * @param  __ADDRESS__ CEC initiator or logical address.
  * @retval Test result (TRUE or FALSE).
  */
#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
/**
  * @}
  */
/* Private functions ---------------------------------------------------------*/
/** @defgroup CEC_Private_Functions CEC Private Functions
  * @{
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* CEC */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F1xx_HAL_CEC_H */