/**
  ******************************************************************************
  * @file    stm32f1xx_hal.h
  * @author  MCD Application Team
  * @brief   This file contains all the functions prototypes for the HAL
  *          module driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_H
#define __STM32F1xx_HAL_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_conf.h"

/** @addtogroup STM32F1xx_HAL_Driver
  * @{
  */

/** @addtogroup HAL
  * @{
  */

/* Exported constants --------------------------------------------------------*/

/** @defgroup HAL_Exported_Constants HAL Exported Constants
  * @{
  */

/** @defgroup HAL_TICK_FREQ Tick Frequency
  * @{
  */
typedef enum
{
  HAL_TICK_FREQ_10HZ         = 100U,
  HAL_TICK_FREQ_100HZ        = 10U,
  HAL_TICK_FREQ_1KHZ         = 1U,
  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
} HAL_TickFreqTypeDef;
/**
  * @}
  */
/* Exported types ------------------------------------------------------------*/
extern __IO uint32_t uwTick;
extern uint32_t uwTickPrio;
extern HAL_TickFreqTypeDef uwTickFreq;

/**
  * @}
  */
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
  * @{
  */

/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
  * @brief   Freeze/Unfreeze Peripherals in Debug mode
  * Note: On devices STM32F10xx8 and STM32F10xxB,
  *                  STM32F101xC/D/E and STM32F103xC/D/E,
  *                  STM32F101xF/G and STM32F103xF/G
  *                  STM32F10xx4 and STM32F10xx6
  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
  *       debug mode (not accessible by the user software in normal mode).
  *       Refer to errata sheet of these devices for more details.
  * @{
  */

/* Peripherals on APB1 */
/**
  * @brief  TIM2 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)

/**
  * @brief  TIM3 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM3()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM3()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)

#if defined (DBGMCU_CR_DBG_TIM4_STOP)
/**
  * @brief  TIM4 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM4()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM4()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM5_STOP)
/**
  * @brief  TIM5 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM5()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM5()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM6_STOP)
/**
  * @brief  TIM6 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM6()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM6()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM7_STOP)
/**
  * @brief  TIM7 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM7()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM7()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM12_STOP)
/**
  * @brief  TIM12 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM12()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM12()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM13_STOP)
/**
  * @brief  TIM13 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM13()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM13()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM14_STOP)
/**
  * @brief  TIM14 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM14()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM14()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
#endif

/**
  * @brief  WWDG Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_WWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_WWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)

/**
  * @brief  IWDG Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_IWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_IWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)

/**
  * @brief  I2C1 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)

#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
/**
  * @brief  I2C2 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#endif

#if defined (DBGMCU_CR_DBG_CAN1_STOP)
/**
  * @brief  CAN1 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_CAN1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
#define __HAL_DBGMCU_UNFREEZE_CAN1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
#endif

#if defined (DBGMCU_CR_DBG_CAN2_STOP)
/**
  * @brief  CAN2 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_CAN2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
#define __HAL_DBGMCU_UNFREEZE_CAN2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
#endif

/* Peripherals on APB2 */
#if defined (DBGMCU_CR_DBG_TIM1_STOP)
/**
  * @brief  TIM1 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM8_STOP)
/**
  * @brief  TIM8 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM8()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM8()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM9_STOP)
/**
  * @brief  TIM9 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM9()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM9()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM10_STOP)
/**
  * @brief  TIM10 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM10()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM10()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM11_STOP)
/**
  * @brief  TIM11 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM11()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM11()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
#endif


#if defined (DBGMCU_CR_DBG_TIM15_STOP)
/**
  * @brief  TIM15 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM15()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM15()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM16_STOP)
/**
  * @brief  TIM16 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM16()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM16()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM17_STOP)
/**
  * @brief  TIM17 Peripherals Debug mode
  */
#define __HAL_DBGMCU_FREEZE_TIM17()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM17()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
#endif

/**
  * @}
  */

/** @defgroup HAL_Private_Macros HAL Private Macros
  * @{
  */
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @addtogroup HAL_Exported_Functions
  * @{
  */
/** @addtogroup HAL_Exported_Functions_Group1
  * @{
  */
/* Initialization and de-initialization functions  ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
/**
  * @}
  */

/** @addtogroup HAL_Exported_Functions_Group2
  * @{
  */
/* Peripheral Control functions  ************************************************/
void HAL_IncTick(void);
void HAL_Delay(uint32_t Delay);
uint32_t HAL_GetTick(void);
uint32_t HAL_GetTickPrio(void);
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
uint32_t HAL_GetUIDw0(void);
uint32_t HAL_GetUIDw1(void);
uint32_t HAL_GetUIDw2(void);
void HAL_DBGMCU_EnableDBGSleepMode(void);
void HAL_DBGMCU_DisableDBGSleepMode(void);
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup HAL_Private_Variables HAL Private Variables
  * @{
  */
/**
  * @}
  */
/* Private constants ---------------------------------------------------------*/
/** @defgroup HAL_Private_Constants HAL Private Constants
  * @{
  */
/**
  * @}
  */
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F1xx_HAL_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/