/**
  ******************************************************************************
  * @file    stm32f2xx_ll_pwr.h
  * @author  MCD Application Team
  * @brief   Header file of PWR LL module.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_LL_PWR_H
#define __STM32F2xx_LL_PWR_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"

/** @addtogroup STM32F2xx_LL_Driver
  * @{
  */

#if defined(PWR)

/** @defgroup PWR_LL PWR
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
  * @{
  */

/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
  * @brief    Flags defines which can be used with LL_PWR_WriteReg function
  * @{
  */
#define LL_PWR_CR_CSBF                     PWR_CR_CSBF            /*!< Clear standby flag */
#define LL_PWR_CR_CWUF                     PWR_CR_CWUF            /*!< Clear wakeup flag */
/**
  * @}
  */

/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
  * @brief    Flags defines which can be used with LL_PWR_ReadReg function
  * @{
  */
#define LL_PWR_CSR_WUF                     PWR_CSR_WUF            /*!< Wakeup flag */
#define LL_PWR_CSR_SBF                     PWR_CSR_SBF            /*!< Standby flag */
#define LL_PWR_CSR_PVDO                    PWR_CSR_PVDO           /*!< Power voltage detector output flag */
#define LL_PWR_CSR_EWUP1                   PWR_CSR_EWUP           /*!< Enable WKUP pin 1 */
/**
  * @}
  */


/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
  * @{
  */
#define LL_PWR_MODE_STOP_MAINREGU             0x00000000U                    /*!< Enter Stop mode when the CPU enters deepsleep */
#define LL_PWR_MODE_STOP_LPREGU               (PWR_CR_LPDS)                  /*!< Enter Stop mode (with low power regulator ON) when the CPU enters deepsleep */
#define LL_PWR_MODE_STANDBY                   (PWR_CR_PDDS)                  /*!< Enter Standby mode when the CPU enters deepsleep */
/**
  * @}
  */

/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE  Regulator Mode In Deep Sleep Mode
 * @{
 */
#define LL_PWR_REGU_DSMODE_MAIN        0x00000000U           /*!< Voltage regulator in main mode during deepsleep mode */
#define LL_PWR_REGU_DSMODE_LOW_POWER   (PWR_CR_LPDS)         /*!< Voltage regulator in low-power mode during deepsleep mode */
/**
  * @}
  */

/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
  * @{
  */
#define LL_PWR_PVDLEVEL_0                  (PWR_CR_PLS_LEV0)      /*!< Voltage threshold detected by PVD 2.2 V */
#define LL_PWR_PVDLEVEL_1                  (PWR_CR_PLS_LEV1)      /*!< Voltage threshold detected by PVD 2.3 V */
#define LL_PWR_PVDLEVEL_2                  (PWR_CR_PLS_LEV2)      /*!< Voltage threshold detected by PVD 2.4 V */
#define LL_PWR_PVDLEVEL_3                  (PWR_CR_PLS_LEV3)      /*!< Voltage threshold detected by PVD 2.5 V */
#define LL_PWR_PVDLEVEL_4                  (PWR_CR_PLS_LEV4)      /*!< Voltage threshold detected by PVD 2.6 V */
#define LL_PWR_PVDLEVEL_5                  (PWR_CR_PLS_LEV5)      /*!< Voltage threshold detected by PVD 2.7 V */
#define LL_PWR_PVDLEVEL_6                  (PWR_CR_PLS_LEV6)      /*!< Voltage threshold detected by PVD 2.8 V */
#define LL_PWR_PVDLEVEL_7                  (PWR_CR_PLS_LEV7)      /*!< Voltage threshold detected by PVD 2.9 V */
/**
  * @}
  */
/** @defgroup PWR_LL_EC_WAKEUP_PIN  Wakeup Pins
  * @{
  */
#define LL_PWR_WAKEUP_PIN1                 (PWR_CSR_EWUP)        /*!< WKUP pin 1 : PA0 */
/**
  * @}
  */

/**
  * @}
  */


/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
  * @{
  */

/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
  * @{
  */

/**
  * @brief  Write a value in PWR register
  * @param  __REG__ Register to be written
  * @param  __VALUE__ Value to be written in the register
  * @retval None
  */
#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))

/**
  * @brief  Read a value in PWR register
  * @param  __REG__ Register to be read
  * @retval Register value
  */
#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
/**
  * @}
  */

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
  * @{
  */

/** @defgroup PWR_LL_EF_Configuration Configuration
  * @{
  */
/**
  * @brief  Enable the Flash Power Down in Stop Mode
  * @rmtoll CR    FPDS       LL_PWR_EnableFlashPowerDown
  * @retval None
  */
__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void)
{
  SET_BIT(PWR->CR, PWR_CR_FPDS);
}

/**
  * @brief  Disable the Flash Power Down in Stop Mode
  * @rmtoll CR    FPDS       LL_PWR_DisableFlashPowerDown
  * @retval None
  */
__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void)
{
  CLEAR_BIT(PWR->CR, PWR_CR_FPDS);
}

/**
  * @brief  Check if the Flash Power Down in Stop Mode is enabled
  * @rmtoll CR    FPDS       LL_PWR_IsEnabledFlashPowerDown
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void)
{
  return (READ_BIT(PWR->CR, PWR_CR_FPDS) == (PWR_CR_FPDS));
}

/**
  * @brief  Enable access to the backup domain
  * @rmtoll CR    DBP       LL_PWR_EnableBkUpAccess
  * @retval None
  */
__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
{
  SET_BIT(PWR->CR, PWR_CR_DBP);
}

/**
  * @brief  Disable access to the backup domain
  * @rmtoll CR    DBP       LL_PWR_DisableBkUpAccess
  * @retval None
  */
__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
{
  CLEAR_BIT(PWR->CR, PWR_CR_DBP);
}

/**
  * @brief  Check if the backup domain is enabled
  * @rmtoll CR    DBP       LL_PWR_IsEnabledBkUpAccess
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
{
  return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
}
/**
  * @brief  Enable the backup regulator
  * @rmtoll CSR    BRE       LL_PWR_EnableBkUpRegulator
  * @note The BRE bit of the PWR_CSR register is protected against parasitic write access.
  * The LL_PWR_EnableBkUpAccess() must be called before using this API.
  * @retval None
  */
__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void)
{
  SET_BIT(PWR->CSR, PWR_CSR_BRE);
}

/**
  * @brief  Disable the backup Regulator
  * @rmtoll CSR    BRE       LL_PWR_DisableBkUpRegulator
  * @note The BRE bit of the PWR_CSR register is protected against parasitic write access.
  * The LL_PWR_EnableBkUpAccess() must be called before using this API.
  * @retval None
  */
__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void)
{
  CLEAR_BIT(PWR->CSR, PWR_CSR_BRE);
}

/**
  * @brief  Check if the backup Regulator is enabled
  * @rmtoll CSR    BRE       LL_PWR_IsEnabledBkUpRegulator
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void)
{
  return (READ_BIT(PWR->CSR, PWR_CSR_BRE) == (PWR_CSR_BRE));
}

/**
  * @brief  Set voltage regulator mode during deep sleep mode
  * @rmtoll CR    LPDS         LL_PWR_SetRegulModeDS
  * @param  RegulMode This parameter can be one of the following values:
  *         @arg @ref LL_PWR_REGU_DSMODE_MAIN
  *         @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
  * @retval None
  */
__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
{
  MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
}

/**
  * @brief  Get voltage regulator mode during deep sleep mode
  * @rmtoll CR    LPDS         LL_PWR_GetRegulModeDS
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_PWR_REGU_DSMODE_MAIN
  *         @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
  */
__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
{
  return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
}

/**
  * @brief  Set power down mode when CPU enters deepsleep
  * @rmtoll CR    PDDS         LL_PWR_SetPowerMode\n
  * @rmtoll CR    LPDS         LL_PWR_SetPowerMode
  * @param  PDMode This parameter can be one of the following values:
  *         @arg @ref LL_PWR_MODE_STOP_MAINREGU
  *         @arg @ref LL_PWR_MODE_STOP_LPREGU
  *         @arg @ref LL_PWR_MODE_STANDBY
  * @retval None
  */
__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
{
  MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
}

/**
  * @brief  Get power down mode when CPU enters deepsleep
  * @rmtoll CR    PDDS         LL_PWR_GetPowerMode\n
  * @rmtoll CR    LPDS         LL_PWR_GetPowerMode
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_PWR_MODE_STOP_MAINREGU
  *         @arg @ref LL_PWR_MODE_STOP_LPREGU
  *         @arg @ref LL_PWR_MODE_STANDBY
  */
__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
{
  return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
}

/**
  * @brief  Configure the voltage threshold detected by the Power Voltage Detector
  * @rmtoll CR    PLS       LL_PWR_SetPVDLevel
  * @param  PVDLevel This parameter can be one of the following values:
  *         @arg @ref LL_PWR_PVDLEVEL_0
  *         @arg @ref LL_PWR_PVDLEVEL_1
  *         @arg @ref LL_PWR_PVDLEVEL_2
  *         @arg @ref LL_PWR_PVDLEVEL_3
  *         @arg @ref LL_PWR_PVDLEVEL_4
  *         @arg @ref LL_PWR_PVDLEVEL_5
  *         @arg @ref LL_PWR_PVDLEVEL_6
  *         @arg @ref LL_PWR_PVDLEVEL_7
  * @retval None
  */
__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
{
  MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
}

/**
  * @brief  Get the voltage threshold detection
  * @rmtoll CR    PLS       LL_PWR_GetPVDLevel
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_PWR_PVDLEVEL_0
  *         @arg @ref LL_PWR_PVDLEVEL_1
  *         @arg @ref LL_PWR_PVDLEVEL_2
  *         @arg @ref LL_PWR_PVDLEVEL_3
  *         @arg @ref LL_PWR_PVDLEVEL_4
  *         @arg @ref LL_PWR_PVDLEVEL_5
  *         @arg @ref LL_PWR_PVDLEVEL_6
  *         @arg @ref LL_PWR_PVDLEVEL_7
  */
__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
{
  return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
}

/**
  * @brief  Enable Power Voltage Detector
  * @rmtoll CR    PVDE       LL_PWR_EnablePVD
  * @retval None
  */
__STATIC_INLINE void LL_PWR_EnablePVD(void)
{
  SET_BIT(PWR->CR, PWR_CR_PVDE);
}

/**
  * @brief  Disable Power Voltage Detector
  * @rmtoll CR    PVDE       LL_PWR_DisablePVD
  * @retval None
  */
__STATIC_INLINE void LL_PWR_DisablePVD(void)
{
  CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
}

/**
  * @brief  Check if Power Voltage Detector is enabled
  * @rmtoll CR    PVDE       LL_PWR_IsEnabledPVD
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
{
  return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
}

/**
  * @brief  Enable the WakeUp PINx functionality
  * @rmtoll CSR   EWUP       LL_PWR_EnableWakeUpPin
  * @param  WakeUpPin This parameter can be one of the following values:
  *         @arg @ref LL_PWR_WAKEUP_PIN1
  * @retval None
  */
__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
{
  SET_BIT(PWR->CSR, WakeUpPin);
}

/**
  * @brief  Disable the WakeUp PINx functionality
  * @rmtoll CSR   EWUP       LL_PWR_DisableWakeUpPin
  * @param  WakeUpPin This parameter can be one of the following values:
  *         @arg @ref LL_PWR_WAKEUP_PIN1
  * @retval None
  */
__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
{
  CLEAR_BIT(PWR->CSR, WakeUpPin);
}

/**
  * @brief  Check if the WakeUp PINx functionality is enabled
  * @rmtoll CSR   EWUP       LL_PWR_IsEnabledWakeUpPin
  * @param  WakeUpPin This parameter can be one of the following values:
  *         @arg @ref LL_PWR_WAKEUP_PIN1
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
{
  return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
}


/**
  * @}
  */

/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
  * @{
  */

/**
  * @brief  Get Wake-up Flag
  * @rmtoll CSR   WUF       LL_PWR_IsActiveFlag_WU
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
{
  return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
}

/**
  * @brief  Get Standby Flag
  * @rmtoll CSR   SBF       LL_PWR_IsActiveFlag_SB
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
{
  return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
}

/**
  * @brief  Get Backup regulator ready Flag
  * @rmtoll CSR   BRR       LL_PWR_IsActiveFlag_BRR
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void)
{
  return (READ_BIT(PWR->CSR, PWR_CSR_BRR) == (PWR_CSR_BRR));
}
/**
  * @brief  Indicate whether VDD voltage is below the selected PVD threshold
  * @rmtoll CSR   PVDO       LL_PWR_IsActiveFlag_PVDO
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
{
  return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
}

/**
  * @brief  Clear Standby Flag
  * @rmtoll CR   CSBF       LL_PWR_ClearFlag_SB
  * @retval None
  */
__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
{
  SET_BIT(PWR->CR, PWR_CR_CSBF);
}

/**
  * @brief  Clear Wake-up Flags
  * @rmtoll CR   CWUF       LL_PWR_ClearFlag_WU
  * @retval None
  */
__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
{
  SET_BIT(PWR->CR, PWR_CR_CWUF);
}
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup PWR_LL_EF_Init De-initialization function
  * @{
  */
ErrorStatus LL_PWR_DeInit(void);
/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined(PWR) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F2xx_LL_PWR_H */