diff --git a/Src/stm32f3xx_hal_uart.c b/Src/stm32f3xx_hal_uart.c
index 136a74a..0a2c8a1 100644
--- a/Src/stm32f3xx_hal_uart.c
+++ b/Src/stm32f3xx_hal_uart.c
@@ -1116,6 +1116,9 @@
     {
       if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
       {
+
+        huart->gState = HAL_UART_STATE_READY;
+
         return HAL_TIMEOUT;
       }
       if (pdata8bits == NULL)
@@ -1133,6 +1136,8 @@
 
     if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
     {
+      huart->gState = HAL_UART_STATE_READY;
+
       return HAL_TIMEOUT;
     }
 
@@ -1204,6 +1209,8 @@
     {
       if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
       {
+        huart->RxState = HAL_UART_STATE_READY;
+
         return HAL_TIMEOUT;
       }
       if (pdata8bits == NULL)
@@ -3083,6 +3090,13 @@
     /* Wait until TEACK flag is set */
     if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
     {
+      /* Disable TXE interrupt for the interrupt process */
+      ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE));
+
+      huart->gState = HAL_UART_STATE_READY;
+
+      __HAL_UNLOCK(huart);
+
       /* Timeout occurred */
       return HAL_TIMEOUT;
     }
@@ -3094,6 +3108,15 @@
     /* Wait until REACK flag is set */
     if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
     {
+      /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error)
+      interrupts for the interrupt process */
+      ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+      ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+      huart->RxState = HAL_UART_STATE_READY;
+
+      __HAL_UNLOCK(huart);
+
       /* Timeout occurred */
       return HAL_TIMEOUT;
     }
@@ -3131,33 +3154,39 @@
     {
       if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
       {
-        /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
-           interrupts for the interrupt process */
-        ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
-        ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
-
-        huart->gState = HAL_UART_STATE_READY;
-        huart->RxState = HAL_UART_STATE_READY;
-
-        __HAL_UNLOCK(huart);
 
         return HAL_TIMEOUT;
       }
 
       if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U)
       {
+        if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET)
+        {
+           /* Clear Overrun Error flag*/
+           __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF);
+
+           /* Blocking error : transfer is aborted
+           Set the UART state ready to be able to start again the process,
+           Disable Rx Interrupts if ongoing */
+           UART_EndRxTransfer(huart);
+
+           huart->ErrorCode = HAL_UART_ERROR_ORE;
+
+           /* Process Unlocked */
+           __HAL_UNLOCK(huart);
+
+           return HAL_ERROR;
+        }
         if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET)
         {
           /* Clear Receiver Timeout flag*/
           __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF);
 
-          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
-             interrupts for the interrupt process */
-          ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
-          ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+          /* Blocking error : transfer is aborted
+          Set the UART state ready to be able to start again the process,
+          Disable Rx Interrupts if ongoing */
+          UART_EndRxTransfer(huart);
 
-          huart->gState = HAL_UART_STATE_READY;
-          huart->RxState = HAL_UART_STATE_READY;
           huart->ErrorCode = HAL_UART_ERROR_RTO;
 
           /* Process Unlocked */