| /** |
| ****************************************************************************** |
| * @file stm32f4xx_hal_flash.h |
| * @author MCD Application Team |
| * @brief Header file of FLASH HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F4xx_HAL_FLASH_H |
| #define __STM32F4xx_HAL_FLASH_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f4xx_hal_def.h" |
| |
| /** @addtogroup STM32F4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup FLASH |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup FLASH_Exported_Types FLASH Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief FLASH Procedure structure definition |
| */ |
| typedef enum |
| { |
| FLASH_PROC_NONE = 0U, |
| FLASH_PROC_SECTERASE, |
| FLASH_PROC_MASSERASE, |
| FLASH_PROC_PROGRAM |
| } FLASH_ProcedureTypeDef; |
| |
| /** |
| * @brief FLASH handle Structure definition |
| */ |
| typedef struct |
| { |
| __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ |
| |
| __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ |
| |
| __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ |
| |
| __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ |
| |
| __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ |
| |
| __IO uint32_t Address; /*Internal variable to save address selected for program*/ |
| |
| HAL_LockTypeDef Lock; /* FLASH locking object */ |
| |
| __IO uint32_t ErrorCode; /* FLASH error code */ |
| |
| }FLASH_ProcessTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup FLASH_Exported_Constants FLASH Exported Constants |
| * @{ |
| */ |
| /** @defgroup FLASH_Error_Code FLASH Error Code |
| * @brief FLASH Error Code |
| * @{ |
| */ |
| #define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ |
| #define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */ |
| #define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */ |
| #define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */ |
| #define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */ |
| #define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */ |
| #define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FLASH_Type_Program FLASH Type Program |
| * @{ |
| */ |
| #define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */ |
| #define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */ |
| #define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */ |
| #define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FLASH_Flag_definition FLASH Flag definition |
| * @brief Flag definition |
| * @{ |
| */ |
| #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ |
| #define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ |
| #define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ |
| #define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ |
| #define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ |
| #define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ |
| #if defined(FLASH_SR_RDERR) |
| #define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */ |
| #endif /* FLASH_SR_RDERR */ |
| #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition |
| * @brief FLASH Interrupt definition |
| * @{ |
| */ |
| #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ |
| #define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism |
| * @{ |
| */ |
| #define FLASH_PSIZE_BYTE 0x00000000U |
| #define FLASH_PSIZE_HALF_WORD 0x00000100U |
| #define FLASH_PSIZE_WORD 0x00000200U |
| #define FLASH_PSIZE_DOUBLE_WORD 0x00000300U |
| #define CR_PSIZE_MASK 0xFFFFFCFFU |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FLASH_Keys FLASH Keys |
| * @{ |
| */ |
| #define RDP_KEY ((uint16_t)0x00A5) |
| #define FLASH_KEY1 0x45670123U |
| #define FLASH_KEY2 0xCDEF89ABU |
| #define FLASH_OPT_KEY1 0x08192A3BU |
| #define FLASH_OPT_KEY2 0x4C5D6E7FU |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup FLASH_Exported_Macros FLASH Exported Macros |
| * @{ |
| */ |
| /** |
| * @brief Set the FLASH Latency. |
| * @param __LATENCY__ FLASH Latency |
| * The value of this parameter depend on device used within the same series |
| * @retval none |
| */ |
| #define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) |
| |
| /** |
| * @brief Get the FLASH Latency. |
| * @retval FLASH Latency |
| * The value of this parameter depend on device used within the same series |
| */ |
| #define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) |
| |
| /** |
| * @brief Enable the FLASH prefetch buffer. |
| * @retval none |
| */ |
| #define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) |
| |
| /** |
| * @brief Disable the FLASH prefetch buffer. |
| * @retval none |
| */ |
| #define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) |
| |
| /** |
| * @brief Enable the FLASH instruction cache. |
| * @retval none |
| */ |
| #define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) |
| |
| /** |
| * @brief Disable the FLASH instruction cache. |
| * @retval none |
| */ |
| #define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) |
| |
| /** |
| * @brief Enable the FLASH data cache. |
| * @retval none |
| */ |
| #define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) |
| |
| /** |
| * @brief Disable the FLASH data cache. |
| * @retval none |
| */ |
| #define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) |
| |
| /** |
| * @brief Resets the FLASH instruction Cache. |
| * @note This function must be used only when the Instruction Cache is disabled. |
| * @retval None |
| */ |
| #define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ |
| FLASH->ACR &= ~FLASH_ACR_ICRST; \ |
| }while(0U) |
| |
| /** |
| * @brief Resets the FLASH data Cache. |
| * @note This function must be used only when the data Cache is disabled. |
| * @retval None |
| */ |
| #define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ |
| FLASH->ACR &= ~FLASH_ACR_DCRST; \ |
| }while(0U) |
| /** |
| * @brief Enable the specified FLASH interrupt. |
| * @param __INTERRUPT__ FLASH interrupt |
| * This parameter can be any combination of the following values: |
| * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt |
| * @arg FLASH_IT_ERR: Error Interrupt |
| * @retval none |
| */ |
| #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the specified FLASH interrupt. |
| * @param __INTERRUPT__ FLASH interrupt |
| * This parameter can be any combination of the following values: |
| * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt |
| * @arg FLASH_IT_ERR: Error Interrupt |
| * @retval none |
| */ |
| #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) |
| |
| /** |
| * @brief Get the specified FLASH flag status. |
| * @param __FLAG__ specifies the FLASH flags to check. |
| * This parameter can be any combination of the following values: |
| * @arg FLASH_FLAG_EOP : FLASH End of Operation flag |
| * @arg FLASH_FLAG_OPERR : FLASH operation Error flag |
| * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag |
| * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag |
| * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag |
| * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag |
| * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) |
| * @arg FLASH_FLAG_BSY : FLASH Busy flag |
| * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices |
| * @retval The new state of __FLAG__ (SET or RESET). |
| */ |
| #define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) |
| |
| /** |
| * @brief Clear the specified FLASH flags. |
| * @param __FLAG__ specifies the FLASH flags to clear. |
| * This parameter can be any combination of the following values: |
| * @arg FLASH_FLAG_EOP : FLASH End of Operation flag |
| * @arg FLASH_FLAG_OPERR : FLASH operation Error flag |
| * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag |
| * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag |
| * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag |
| * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag |
| * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) |
| * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices |
| * @retval none |
| */ |
| #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) |
| /** |
| * @} |
| */ |
| |
| /* Include FLASH HAL Extension module */ |
| #include "stm32f4xx_hal_flash_ex.h" |
| #include "stm32f4xx_hal_flash_ramfunc.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup FLASH_Exported_Functions |
| * @{ |
| */ |
| /** @addtogroup FLASH_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Program operation functions ***********************************************/ |
| HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); |
| HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); |
| /* FLASH IRQ handler method */ |
| void HAL_FLASH_IRQHandler(void); |
| /* Callbacks in non blocking modes */ |
| void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); |
| void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup FLASH_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* Peripheral Control functions **********************************************/ |
| HAL_StatusTypeDef HAL_FLASH_Unlock(void); |
| HAL_StatusTypeDef HAL_FLASH_Lock(void); |
| HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); |
| HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); |
| /* Option bytes control */ |
| HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup FLASH_Exported_Functions_Group3 |
| * @{ |
| */ |
| /* Peripheral State functions ************************************************/ |
| uint32_t HAL_FLASH_GetError(void); |
| HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup FLASH_Private_Variables FLASH Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup FLASH_Private_Constants FLASH Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @brief ACR register byte 0 (Bits[7:0]) base address |
| */ |
| #define ACR_BYTE0_ADDRESS 0x40023C00U |
| /** |
| * @brief OPTCR register byte 0 (Bits[7:0]) base address |
| */ |
| #define OPTCR_BYTE0_ADDRESS 0x40023C14U |
| /** |
| * @brief OPTCR register byte 1 (Bits[15:8]) base address |
| */ |
| #define OPTCR_BYTE1_ADDRESS 0x40023C15U |
| /** |
| * @brief OPTCR register byte 2 (Bits[23:16]) base address |
| */ |
| #define OPTCR_BYTE2_ADDRESS 0x40023C16U |
| /** |
| * @brief OPTCR register byte 3 (Bits[31:24]) base address |
| */ |
| #define OPTCR_BYTE3_ADDRESS 0x40023C17U |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup FLASH_Private_Macros FLASH Private Macros |
| * @{ |
| */ |
| |
| /** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters |
| * @{ |
| */ |
| #define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ |
| ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ |
| ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ |
| ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup FLASH_Private_Functions FLASH Private Functions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F4xx_HAL_FLASH_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
