| /** |
| ****************************************************************************** |
| * @file stm32f4xx_hal_mmc.h |
| * @author MCD Application Team |
| * @brief Header file of MMC HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F4xx_HAL_MMC_H |
| #define STM32F4xx_HAL_MMC_H |
| |
| #if defined(SDIO) |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f4xx_ll_sdmmc.h" |
| |
| /** @addtogroup STM32F4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup MMC |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup MMC_Exported_Types MMC Exported Types |
| * @{ |
| */ |
| |
| /** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure |
| * @{ |
| */ |
| typedef enum |
| { |
| HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */ |
| HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */ |
| HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */ |
| HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */ |
| HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */ |
| HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */ |
| HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfer State */ |
| HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */ |
| }HAL_MMC_StateTypeDef; |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure |
| * @{ |
| */ |
| typedef uint32_t HAL_MMC_CardStateTypeDef; |
| |
| #define HAL_MMC_CARD_READY 0x00000001U /*!< Card state is ready */ |
| #define HAL_MMC_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */ |
| #define HAL_MMC_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ |
| #define HAL_MMC_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ |
| #define HAL_MMC_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ |
| #define HAL_MMC_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ |
| #define HAL_MMC_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ |
| #define HAL_MMC_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ |
| #define HAL_MMC_CARD_ERROR 0x000000FFU /*!< Card response Error */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition |
| * @{ |
| */ |
| #define MMC_InitTypeDef SDIO_InitTypeDef |
| #define MMC_TypeDef SDIO_TypeDef |
| |
| /** |
| * @brief MMC Card Information Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t CardType; /*!< Specifies the card Type */ |
| |
| uint32_t Class; /*!< Specifies the class of the card class */ |
| |
| uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ |
| |
| uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ |
| |
| uint32_t BlockSize; /*!< Specifies one block size in bytes */ |
| |
| uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ |
| |
| uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ |
| |
| }HAL_MMC_CardInfoTypeDef; |
| |
| /** |
| * @brief MMC handle Structure definition |
| */ |
| #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) |
| typedef struct __MMC_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ |
| { |
| MMC_TypeDef *Instance; /*!< MMC registers base address */ |
| |
| MMC_InitTypeDef Init; /*!< MMC required parameters */ |
| |
| HAL_LockTypeDef Lock; /*!< MMC locking object */ |
| |
| uint8_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ |
| |
| uint32_t TxXferSize; /*!< MMC Tx Transfer size */ |
| |
| uint8_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ |
| |
| uint32_t RxXferSize; /*!< MMC Rx Transfer size */ |
| |
| __IO uint32_t Context; /*!< MMC transfer context */ |
| |
| __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ |
| |
| __IO uint32_t ErrorCode; /*!< MMC Card Error codes */ |
| |
| DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */ |
| |
| DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */ |
| |
| HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ |
| |
| uint32_t CSD[4U]; /*!< MMC card specific data table */ |
| |
| uint32_t CID[4U]; /*!< MMC card identification number table */ |
| |
| uint32_t Ext_CSD[128]; |
| |
| #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) |
| void (* TxCpltCallback) (struct __MMC_HandleTypeDef *hmmc); |
| void (* RxCpltCallback) (struct __MMC_HandleTypeDef *hmmc); |
| void (* ErrorCallback) (struct __MMC_HandleTypeDef *hmmc); |
| void (* AbortCpltCallback) (struct __MMC_HandleTypeDef *hmmc); |
| |
| void (* MspInitCallback) (struct __MMC_HandleTypeDef *hmmc); |
| void (* MspDeInitCallback) (struct __MMC_HandleTypeDef *hmmc); |
| #endif |
| }MMC_HandleTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register |
| * @{ |
| */ |
| typedef struct |
| { |
| __IO uint8_t CSDStruct; /*!< CSD structure */ |
| __IO uint8_t SysSpecVersion; /*!< System specification version */ |
| __IO uint8_t Reserved1; /*!< Reserved */ |
| __IO uint8_t TAAC; /*!< Data read access time 1 */ |
| __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ |
| __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ |
| __IO uint16_t CardComdClasses; /*!< Card command classes */ |
| __IO uint8_t RdBlockLen; /*!< Max. read data block length */ |
| __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ |
| __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ |
| __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ |
| __IO uint8_t DSRImpl; /*!< DSR implemented */ |
| __IO uint8_t Reserved2; /*!< Reserved */ |
| __IO uint32_t DeviceSize; /*!< Device Size */ |
| __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ |
| __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ |
| __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ |
| __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ |
| __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ |
| __IO uint8_t EraseGrSize; /*!< Erase group size */ |
| __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ |
| __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ |
| __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ |
| __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ |
| __IO uint8_t WrSpeedFact; /*!< Write speed factor */ |
| __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ |
| __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ |
| __IO uint8_t Reserved3; /*!< Reserved */ |
| __IO uint8_t ContentProtectAppli; /*!< Content protection application */ |
| __IO uint8_t FileFormatGroup; /*!< File format group */ |
| __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ |
| __IO uint8_t PermWrProtect; /*!< Permanent write protection */ |
| __IO uint8_t TempWrProtect; /*!< Temporary write protection */ |
| __IO uint8_t FileFormat; /*!< File format */ |
| __IO uint8_t ECC; /*!< ECC code */ |
| __IO uint8_t CSD_CRC; /*!< CSD CRC */ |
| __IO uint8_t Reserved4; /*!< Always 1 */ |
| |
| }HAL_MMC_CardCSDTypeDef; |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register |
| * @{ |
| */ |
| typedef struct |
| { |
| __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ |
| __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ |
| __IO uint32_t ProdName1; /*!< Product Name part1 */ |
| __IO uint8_t ProdName2; /*!< Product Name part2 */ |
| __IO uint8_t ProdRev; /*!< Product Revision */ |
| __IO uint32_t ProdSN; /*!< Product Serial Number */ |
| __IO uint8_t Reserved1; /*!< Reserved1 */ |
| __IO uint16_t ManufactDate; /*!< Manufacturing Date */ |
| __IO uint8_t CID_CRC; /*!< CID CRC */ |
| __IO uint8_t Reserved2; /*!< Always 1 */ |
| |
| }HAL_MMC_CardCIDTypeDef; |
| /** |
| * @} |
| */ |
| |
| #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) |
| /** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition |
| * @{ |
| */ |
| typedef enum |
| { |
| HAL_MMC_TX_CPLT_CB_ID = 0x00U, /*!< MMC Tx Complete Callback ID */ |
| HAL_MMC_RX_CPLT_CB_ID = 0x01U, /*!< MMC Rx Complete Callback ID */ |
| HAL_MMC_ERROR_CB_ID = 0x02U, /*!< MMC Error Callback ID */ |
| HAL_MMC_ABORT_CB_ID = 0x03U, /*!< MMC Abort Callback ID */ |
| |
| HAL_MMC_MSP_INIT_CB_ID = 0x10U, /*!< MMC MspInit Callback ID */ |
| HAL_MMC_MSP_DEINIT_CB_ID = 0x11U /*!< MMC MspDeInit Callback ID */ |
| }HAL_MMC_CallbackIDTypeDef; |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition |
| * @{ |
| */ |
| typedef void (*pMMC_CallbackTypeDef) (MMC_HandleTypeDef *hmmc); |
| /** |
| * @} |
| */ |
| #endif |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup MMC_Exported_Constants Exported Constants |
| * @{ |
| */ |
| |
| #define MMC_BLOCKSIZE 512U /*!< Block size is 512 bytes */ |
| |
| /** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition |
| * @{ |
| */ |
| #define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ |
| #define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ |
| #define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ |
| #define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ |
| #define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ |
| #define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ |
| #define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ |
| #define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ |
| #define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the |
| number of transferred bytes does not match the block length */ |
| #define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ |
| #define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ |
| #define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ |
| #define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock |
| command or if there was an attempt to access a locked card */ |
| #define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ |
| #define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ |
| #define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ |
| #define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ |
| #define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ |
| #define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ |
| #define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ |
| #define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ |
| #define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ |
| #define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ |
| #define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out |
| of erase sequence command was received */ |
| #define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ |
| #define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ |
| #define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ |
| #define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ |
| #define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ |
| #define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ |
| #define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ |
| #define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ |
| #define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ |
| |
| #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) |
| #define HAL_MMC_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration |
| * @{ |
| */ |
| #define MMC_CONTEXT_NONE 0x00000000U /*!< None */ |
| #define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */ |
| #define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */ |
| #define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */ |
| #define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */ |
| #define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */ |
| #define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode |
| * @{ |
| */ |
| /** |
| * @brief |
| */ |
| #define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< High voltage in byte mode */ |
| #define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< Dual voltage in byte mode */ |
| #define MMC_LOW_VOLTAGE_RANGE 0x80000080U /*!< Low voltage in byte mode */ |
| #define EMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< High voltage in sector mode */ |
| #define EMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< Dual voltage in sector mode */ |
| #define EMMC_LOW_VOLTAGE_RANGE 0xC0000080U /*!< Low voltage in sector mode */ |
| #define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards |
| * @{ |
| */ |
| #define MMC_LOW_CAPACITY_CARD 0x00000000U /*!< MMC Card Capacity <=2Gbytes */ |
| #define MMC_HIGH_CAPACITY_CARD 0x00000001U /*!< MMC Card Capacity >2Gbytes and <2Tbytes */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup MMC_Exported_macros MMC Exported Macros |
| * @brief macros to handle interrupts and specific clock configurations |
| * @{ |
| */ |
| /** @brief Reset MMC handle state. |
| * @param __HANDLE__ : MMC handle. |
| * @retval None |
| */ |
| #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) |
| #define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) do { \ |
| (__HANDLE__)->State = HAL_MMC_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MMC_STATE_RESET) |
| #endif |
| |
| /** |
| * @brief Enable the MMC device. |
| * @retval None |
| */ |
| #define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance) |
| |
| /** |
| * @brief Disable the MMC device. |
| * @retval None |
| */ |
| #define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance) |
| |
| /** |
| * @brief Enable the SDMMC DMA transfer. |
| * @retval None |
| */ |
| #define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance) |
| |
| /** |
| * @brief Disable the SDMMC DMA transfer. |
| * @retval None |
| */ |
| #define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance) |
| |
| /** |
| * @brief Enable the MMC device interrupt. |
| * @param __HANDLE__: MMC Handle |
| * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled. |
| * This parameter can be one or a combination of the following values: |
| * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt |
| * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
| * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
| * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
| * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
| * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
| * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
| * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
| * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| * @retval None |
| */ |
| #define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the MMC device interrupt. |
| * @param __HANDLE__: MMC Handle |
| * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled. |
| * This parameter can be one or a combination of the following values: |
| * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt |
| * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
| * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
| * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
| * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
| * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
| * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
| * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
| * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| * @retval None |
| */ |
| #define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the specified MMC flag is set or not. |
| * @param __HANDLE__: MMC Handle |
| * @param __FLAG__: specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) |
| * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) |
| * @arg SDIO_FLAG_CTIMEOUT: Command response timeout |
| * @arg SDIO_FLAG_DTIMEOUT: Data timeout |
| * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error |
| * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error |
| * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) |
| * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) |
| * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) |
| * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) |
| * @arg SDIO_FLAG_CMDACT: Command transfer in progress |
| * @arg SDIO_FLAG_TXACT: Data transmit in progress |
| * @arg SDIO_FLAG_RXACT: Data receive in progress |
| * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty |
| * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full |
| * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full |
| * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full |
| * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty |
| * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty |
| * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO |
| * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO |
| * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received |
| * @retval The new state of MMC FLAG (SET or RESET). |
| */ |
| #define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) |
| |
| /** |
| * @brief Clear the MMC's pending flags. |
| * @param __HANDLE__: MMC Handle |
| * @param __FLAG__: specifies the flag to clear. |
| * This parameter can be one or a combination of the following values: |
| * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) |
| * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) |
| * @arg SDIO_FLAG_CTIMEOUT: Command response timeout |
| * @arg SDIO_FLAG_DTIMEOUT: Data timeout |
| * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error |
| * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error |
| * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) |
| * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) |
| * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) |
| * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) |
| * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received |
| * @retval None |
| */ |
| #define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) |
| |
| /** |
| * @brief Check whether the specified MMC interrupt has occurred or not. |
| * @param __HANDLE__: MMC Handle |
| * @param __INTERRUPT__: specifies the SDMMC interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt |
| * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
| * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
| * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
| * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
| * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
| * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
| * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
| * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| * @retval The new state of MMC IT (SET or RESET). |
| */ |
| #define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| |
| /** |
| * @brief Clear the MMC's interrupt pending bits. |
| * @param __HANDLE__: MMC Handle |
| * @param __INTERRUPT__: specifies the interrupt pending bit to clear. |
| * This parameter can be one or a combination of the following values: |
| * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt |
| * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| * @retval None |
| */ |
| #define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup MMC_Exported_Functions MMC Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); |
| HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); |
| HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc); |
| void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); |
| void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions |
| * @{ |
| */ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); |
| /* Non-Blocking mode: IT */ |
| HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); |
| HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); |
| HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); |
| |
| void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); |
| |
| /* Callback in non blocking modes (DMA) */ |
| void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); |
| void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); |
| void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); |
| void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); |
| |
| #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) |
| /* MMC callback registering/unregistering */ |
| HAL_StatusTypeDef HAL_MMC_RegisterCallback (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId); |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Functions_Group4 MMC card related functions |
| * @{ |
| */ |
| HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); |
| HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); |
| HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); |
| HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); |
| HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions |
| * @{ |
| */ |
| HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc); |
| uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MMC_Exported_Functions_Group6 Peripheral Abort management |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); |
| HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /** @defgroup MMC_Private_Types MMC Private Types |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private defines -----------------------------------------------------------*/ |
| /** @defgroup MMC_Private_Defines MMC Private Defines |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup MMC_Private_Variables MMC Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup MMC_Private_Constants MMC Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup MMC_Private_Macros MMC Private Macros |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private functions prototypes ----------------------------------------------*/ |
| /** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup MMC_Private_Functions MMC Private Functions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* SDIO */ |
| |
| #endif /* STM32F4xx_HAL_MMC_H */ |
