/**
  ******************************************************************************
  * @file    stm32f7xx_ll_system.h
  * @author  MCD Application Team
  * @brief   Header file of SYSTEM LL module.
  @verbatim
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
    [..]
    The LL SYSTEM driver contains a set of generic APIs that can be
    used by user:
      (+) Some of the FLASH features need to be handled in the SYSTEM file.
      (+) Access to DBGCMU registers
      (+) Access to SYSCFG registers

  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_LL_SYSTEM_H
#define __STM32F7xx_LL_SYSTEM_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx.h"

/** @addtogroup STM32F7xx_LL_Driver
  * @{
  */

#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)

/** @defgroup SYSTEM_LL SYSTEM
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/

/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
  * @{
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/

/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
  * @{
  */

/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
* @{
*/
#define LL_SYSCFG_REMAP_BOOT0               0x00000000U                                         /*!< Boot information after Reset  */
#define LL_SYSCFG_REMAP_BOOT1               SYSCFG_MEMRMP_MEM_BOOT                              /*!< Boot information after Reset  */
/**
  * @}
  */


#if defined(SYSCFG_MEMRMP_SWP_FB)
/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
  * @{
  */
#define LL_SYSCFG_BANKMODE_BANK1          0x00000000U              /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM)
                                                                      and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/

#define LL_SYSCFG_BANKMODE_BANK2          SYSCFG_MEMRMP_SWP_FB     /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM)
                                                                      and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */
/**
  * @}
  */
#endif /* SYSCFG_MEMRMP_SWP_FB */

#if defined(SYSCFG_PMC_MII_RMII_SEL)
 /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC
* @{
*/
#define LL_SYSCFG_PMC_ETHMII               0x00000000U                                         /*!< ETH Media MII interface */
#define LL_SYSCFG_PMC_ETHRMII              (uint32_t)SYSCFG_PMC_MII_RMII_SEL                   /*!< ETH Media RMII interface */

/**
  * @}
  */
#endif /* SYSCFG_PMC_MII_RMII_SEL */

/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
  * @{
  */
#if defined(SYSCFG_PMC_I2C1_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1        SYSCFG_PMC_I2C1_FMP       /*!< Enable Fast Mode Plus for I2C1      */
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2        SYSCFG_PMC_I2C2_FMP       /*!< Enable Fast Mode Plus for I2C2      */
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3        SYSCFG_PMC_I2C3_FMP       /*!< Enable Fast Mode Plus for I2C3      */
#endif /* SYSCFG_PMC_I2C1_FMP */
#if defined(SYSCFG_PMC_I2C4_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4        SYSCFG_PMC_I2C4_FMP       /*!< Enable Fast Mode Plus for I2C4      */
#endif /* SYSCFG_PMC_I2C4_FMP */
#if defined(SYSCFG_PMC_I2C_PB6_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6         SYSCFG_PMC_I2C_PB6_FMP    /*!< Enable Fast Mode Plus on PB6        */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7         SYSCFG_PMC_I2C_PB7_FMP    /*!< Enable Fast Mode Plus on PB7        */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8         SYSCFG_PMC_I2C_PB8_FMP    /*!< Enable Fast Mode Plus on PB8        */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9         SYSCFG_PMC_I2C_PB9_FMP    /*!< Enable Fast Mode Plus on PB9        */
#endif /* SYSCFG_PMC_I2C_PB6_FMP */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
  * @{
  */
#define LL_SYSCFG_EXTI_PORTA               0U               /*!< EXTI PORT A                        */
#define LL_SYSCFG_EXTI_PORTB               1U               /*!< EXTI PORT B                        */
#define LL_SYSCFG_EXTI_PORTC               2U               /*!< EXTI PORT C                        */
#define LL_SYSCFG_EXTI_PORTD               3U               /*!< EXTI PORT D                        */
#define LL_SYSCFG_EXTI_PORTE               4U               /*!< EXTI PORT E                        */
#if defined(GPIOF)
#define LL_SYSCFG_EXTI_PORTF               5U               /*!< EXTI PORT F                        */
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_SYSCFG_EXTI_PORTG               6U               /*!< EXTI PORT G                        */
#endif /* GPIOG */
#define LL_SYSCFG_EXTI_PORTH               7U               /*!< EXTI PORT H                        */
#if defined(GPIOI)
#define LL_SYSCFG_EXTI_PORTI               8U               /*!< EXTI PORT I                        */
#endif /* GPIOI */
#if defined(GPIOJ)
#define LL_SYSCFG_EXTI_PORTJ               9U               /*!< EXTI PORT J                        */
#endif /* GPIOJ */
#if defined(GPIOK)
#define LL_SYSCFG_EXTI_PORTK               10U              /*!< EXTI PORT k                        */
#endif /* GPIOK */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
  * @{
  */
#define LL_SYSCFG_EXTI_LINE0               (0x000FU << 16U | 0U)  /*!< EXTI_POSITION_0  | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE1               (0x00F0U << 16U | 0U)  /*!< EXTI_POSITION_4  | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE2               (0x0F00U << 16U | 0U)  /*!< EXTI_POSITION_8  | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE3               (0xF000U << 16U | 0U)  /*!< EXTI_POSITION_12 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE4               (0x000FU << 16U | 1U)  /*!< EXTI_POSITION_0  | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE5               (0x00F0U << 16U | 1U)  /*!< EXTI_POSITION_4  | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE6               (0x0F00U << 16U | 1U)  /*!< EXTI_POSITION_8  | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE7               (0xF000U << 16U | 1U)  /*!< EXTI_POSITION_12 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE8               (0x000FU << 16U | 2U)  /*!< EXTI_POSITION_0  | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE9               (0x00F0U << 16U | 2U)  /*!< EXTI_POSITION_4  | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE10              (0x0F00U << 16U | 2U)  /*!< EXTI_POSITION_8  | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE11              (0xF000U << 16U | 2U)  /*!< EXTI_POSITION_12 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE12              (0x000FU << 16U | 3U)  /*!< EXTI_POSITION_0  | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE13              (0x00F0U << 16U | 3U)  /*!< EXTI_POSITION_4  | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE14              (0x0F00U << 16U | 3U)  /*!< EXTI_POSITION_8  | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE15              (0xF000U << 16U | 3U)  /*!< EXTI_POSITION_12 | EXTICR[3] */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
  * @{
  */
#if defined(SYSCFG_CBR_CLL)
#define LL_SYSCFG_TIMBREAK_LOCKUP          SYSCFG_CBR_CLL     /*!< Enables and locks the Lockup output (raised during core
                                                                   lockup state) of Cortex-M7 with Break Input of TIMER1, TIMER8 */
#define LL_SYSCFG_TIMBREAK_PVD             SYSCFG_CBR_PVDL    /*!< Enables and locks the PVD connection with TIMER1, TIMER8 Break input.
                                                                   It also locks (write protect) the PVD_EN and PVDSEL[2:0] bits 
                                                                   of the power controller */
#endif /* SYSCFG_CBR_CLL */
/**
  * @}
  */
/** @defgroup SYSTEM_LL_EC_CMP_PD SYSCFG CMP PD
  * @{
  */
#define LL_SYSCFG_DISABLE_CMP_PD          0x00000000U             /*!< I/O compensation cell power-down mode */
#define LL_SYSCFG_ENABLE_CMP_PD           SYSCFG_CMPCR_CMP_PD     /*!< I/O compensation cell enabled */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
  * @{
  */
#define LL_DBGMCU_TRACE_NONE               0x00000000U                                     /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH             DBGMCU_CR_TRACE_IOEN                            /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1        (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2        (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4        (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)   /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
  * @{
  */
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP      DBGMCU_APB1_FZ_DBG_TIM2_STOP          /*!< TIM2 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP      DBGMCU_APB1_FZ_DBG_TIM3_STOP          /*!< TIM3 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP      DBGMCU_APB1_FZ_DBG_TIM4_STOP          /*!< TIM4 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP      DBGMCU_APB1_FZ_DBG_TIM5_STOP          /*!< TIM5 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP      DBGMCU_APB1_FZ_DBG_TIM6_STOP          /*!< TIM6 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP      DBGMCU_APB1_FZ_DBG_TIM7_STOP          /*!< TIM7 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM12_STOP     DBGMCU_APB1_FZ_DBG_TIM12_STOP         /*!< TIM12 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM13_STOP     DBGMCU_APB1_FZ_DBG_TIM13_STOP         /*!< TIM13 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM14_STOP     DBGMCU_APB1_FZ_DBG_TIM14_STOP         /*!< TIM14 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP    DBGMCU_APB1_FZ_DBG_LPTIM1_STOP        /*!< LPTIIM1 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_RTC_STOP       DBGMCU_APB1_FZ_DBG_RTC_STOP           /*!< RTC counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP      DBGMCU_APB1_FZ_DBG_WWDG_STOP          /*!< Debug Window Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP      DBGMCU_APB1_FZ_DBG_IWDG_STOP          /*!< Debug Independent Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP      DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP      DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C3_STOP      DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */
#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT)
#define LL_DBGMCU_APB1_GRP1_I2C4_STOP      DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */
#define LL_DBGMCU_APB1_GRP1_CAN1_STOP       DBGMCU_APB1_FZ_DBG_CAN1_STOP         /*!< CAN1 debug stopped when Core is halted  */
#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN2_STOP       DBGMCU_APB1_FZ_DBG_CAN2_STOP         /*!< CAN2 debug stopped when Core is halted  */
#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN3_STOP       DBGMCU_APB1_FZ_DBG_CAN3_STOP         /*!< CAN3 debug stopped when Core is halted  */
#endif /*DBGMCU_APB1_FZ_DBG_CAN3_STOP*/
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
  * @{
  */
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP      DBGMCU_APB2_FZ_DBG_TIM1_STOP     /*!< TIM1 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP      DBGMCU_APB2_FZ_DBG_TIM8_STOP     /*!< TIM8 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM9_STOP      DBGMCU_APB2_FZ_DBG_TIM9_STOP     /*!< TIM9 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM10_STOP     DBGMCU_APB2_FZ_DBG_TIM10_STOP    /*!< TIM10 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM11_STOP     DBGMCU_APB2_FZ_DBG_TIM11_STOP    /*!< TIM11 counter stopped when core is halted */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
  * @{
  */
#define LL_FLASH_LATENCY_0                 FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero wait state */
#define LL_FLASH_LATENCY_1                 FLASH_ACR_LATENCY_1WS   /*!< FLASH One wait state */
#define LL_FLASH_LATENCY_2                 FLASH_ACR_LATENCY_2WS   /*!< FLASH Two wait states */
#define LL_FLASH_LATENCY_3                 FLASH_ACR_LATENCY_3WS   /*!< FLASH Three wait states */
#define LL_FLASH_LATENCY_4                 FLASH_ACR_LATENCY_4WS   /*!< FLASH Four wait states */
#define LL_FLASH_LATENCY_5                 FLASH_ACR_LATENCY_5WS   /*!< FLASH five wait state */
#define LL_FLASH_LATENCY_6                 FLASH_ACR_LATENCY_6WS   /*!< FLASH six wait state */
#define LL_FLASH_LATENCY_7                 FLASH_ACR_LATENCY_7WS   /*!< FLASH seven wait states */
#define LL_FLASH_LATENCY_8                 FLASH_ACR_LATENCY_8WS   /*!< FLASH eight wait states */
#define LL_FLASH_LATENCY_9                 FLASH_ACR_LATENCY_9WS   /*!< FLASH nine wait states */
#define LL_FLASH_LATENCY_10                FLASH_ACR_LATENCY_10WS   /*!< FLASH ten wait states */
#define LL_FLASH_LATENCY_11                FLASH_ACR_LATENCY_11WS   /*!< FLASH eleven wait states */
#define LL_FLASH_LATENCY_12                FLASH_ACR_LATENCY_12WS   /*!< FLASH twelve wait states */
#define LL_FLASH_LATENCY_13                FLASH_ACR_LATENCY_13WS   /*!< FLASH thirteen wait states */
#define LL_FLASH_LATENCY_14                FLASH_ACR_LATENCY_14WS   /*!< FLASH fourteen wait states */
#define LL_FLASH_LATENCY_15                FLASH_ACR_LATENCY_15WS   /*!< FLASH fifteen wait states */
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
  * @{
  */

/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
  * @{
  */

/**
  * @brief  Enables the FMC Memory Mapping Swapping
  * @rmtoll SYSCFG_MEMRMP SWP_FMC      LL_SYSCFG_EnableFMCMemorySwapping
  * @note   SDRAM is accessible at 0x60000000 and NOR/RAM
  *         is accessible at 0xC0000000
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void)
{
  SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0);
}

/**
  * @brief  Disables the FMC Memory Mapping Swapping
  * @rmtoll SYSCFG_MEMRMP SWP_FMC      LL_SYSCFG_DisableFMCMemorySwapping
  * @note   SDRAM is accessible at 0xC0000000 (default mapping)
  *         and NOR/RAM is accessible at 0x60000000 (default mapping)
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void)
{
  CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC);
}

/**
  * @brief  Enables the Compensation Cell
  * @rmtoll SYSCFG_CMPCR CMP_PD      LL_SYSCFG_EnableCompensationCell
  * @note   The I/O compensation cell can be used only when the device supply
  *         voltage ranges from 2.4 to 3.6 V
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void)
{
  SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
}

/**
  * @brief  Disables the Compensation Cell
  * @rmtoll SYSCFG_CMPCR CMP_PD      LL_SYSCFG_DisableCompensationCell
  * @note   The I/O compensation cell can be used only when the device supply
  *         voltage ranges from 2.4 to 3.6 V
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void)
{
  CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
}

/**
  * @brief  Get Compensation Cell ready Flag
  * @rmtoll SYSCFG_CMPCR READY  LL_SYSCFG_IsActiveFlag_CMPCR
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void)
{
  return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY));
}


/**
  * @brief  Get the memory boot mapping as configured by user
  * @rmtoll SYSCFG_MEMRMP MEM_BOOT      LL_SYSCFG_GetRemapMemoryBoot
  * @retval Returned value can be one of the following values:
  *           @arg @ref LL_SYSCFG_REMAP_BOOT0
  *           @arg @ref LL_SYSCFG_REMAP_BOOT1
  *
  *         (*) value not defined in all devices
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemoryBoot(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT));
}

#if defined(SYSCFG_PMC_MII_RMII_SEL)
/**
  * @brief  Select Ethernet PHY interface
  * @rmtoll SYSCFG_PMC MII_RMII_SEL       LL_SYSCFG_SetPHYInterface
  * @param  Interface This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_PMC_ETHMII
  *         @arg @ref LL_SYSCFG_PMC_ETHRMII
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface)
{
  MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface);
}

/**
  * @brief  Get Ethernet PHY interface
  * @rmtoll SYSCFG_PMC MII_RMII_SEL       LL_SYSCFG_GetPHYInterface
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_PMC_ETHMII
  *         @arg @ref LL_SYSCFG_PMC_ETHRMII
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL));
}
#endif /* SYSCFG_PMC_MII_RMII_SEL */


#if defined(SYSCFG_MEMRMP_SWP_FB)
/**
  * @brief  Select Flash bank mode (Bank flashed at 0x08000000)
  * @rmtoll SYSCFG_MEMRMP FB_MODE       LL_SYSCFG_SetFlashBankMode
  * @param  Bank This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK1
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK2
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank)
{
  MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB, Bank);
}

/**
  * @brief  Get Flash bank mode (Bank flashed at 0x08000000)
  * @rmtoll SYSCFG_MEMRMP FB_MODE       LL_SYSCFG_GetFlashBankMode
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK1
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK2
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB));
}

#endif /* SYSCFG_MEMRMP_SWP_FB */

#if defined(SYSCFG_PMC_I2C1_FMP)
/**
  * @brief  Enable the I2C fast mode plus driving capability.
  * @rmtoll SYSCFG_PMC I2C_PBx_FMP   LL_SYSCFG_EnableFastModePlus\n
  *         SYSCFG_PMC I2Cx_FMP      LL_SYSCFG_EnableFastModePlus
  * @param  ConfigFastModePlus This parameter can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4(*)
  *
  *         (*) value not defined in all devices
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
{
  SET_BIT(SYSCFG->PMC, ConfigFastModePlus);
}

/**
  * @brief  Disable the I2C fast mode plus driving capability.
  * @rmtoll SYSCFG_PMC I2C_PBx_FMP   LL_SYSCFG_DisableFastModePlus\n
  *         SYSCFG_PMC I2Cx_FMP      LL_SYSCFG_DisableFastModePlus
  * @param  ConfigFastModePlus This parameter can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4
  *         (*) value not defined in all devices
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
{
  CLEAR_BIT(SYSCFG->PMC, ConfigFastModePlus);
}
#endif /* SYSCFG_PMC_I2C1_FMP */


/**
  * @brief  Configure source input for the EXTI external interrupt.
  * @rmtoll SYSCFG_EXTICR1 EXTIx         LL_SYSCFG_SetEXTISource\n
  *         SYSCFG_EXTICR2 EXTIx         LL_SYSCFG_SetEXTISource\n
  *         SYSCFG_EXTICR3 EXTIx         LL_SYSCFG_SetEXTISource\n
  *         SYSCFG_EXTICR4 EXTIx         LL_SYSCFG_SetEXTISource
  * @param  Port This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_PORTA
  *         @arg @ref LL_SYSCFG_EXTI_PORTB
  *         @arg @ref LL_SYSCFG_EXTI_PORTC
  *         @arg @ref LL_SYSCFG_EXTI_PORTD
  *         @arg @ref LL_SYSCFG_EXTI_PORTE
  *         @arg @ref LL_SYSCFG_EXTI_PORTF
  *         @arg @ref LL_SYSCFG_EXTI_PORTG
  *         @arg @ref LL_SYSCFG_EXTI_PORTH
  *         @arg @ref LL_SYSCFG_EXTI_PORTI
  *         @arg @ref LL_SYSCFG_EXTI_PORTJ
  *         @arg @ref LL_SYSCFG_EXTI_PORTK
  *
  *         (*) value not defined in all devices
  * @param  Line This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_LINE0
  *         @arg @ref LL_SYSCFG_EXTI_LINE1
  *         @arg @ref LL_SYSCFG_EXTI_LINE2
  *         @arg @ref LL_SYSCFG_EXTI_LINE3
  *         @arg @ref LL_SYSCFG_EXTI_LINE4
  *         @arg @ref LL_SYSCFG_EXTI_LINE5
  *         @arg @ref LL_SYSCFG_EXTI_LINE6
  *         @arg @ref LL_SYSCFG_EXTI_LINE7
  *         @arg @ref LL_SYSCFG_EXTI_LINE8
  *         @arg @ref LL_SYSCFG_EXTI_LINE9
  *         @arg @ref LL_SYSCFG_EXTI_LINE10
  *         @arg @ref LL_SYSCFG_EXTI_LINE11
  *         @arg @ref LL_SYSCFG_EXTI_LINE12
  *         @arg @ref LL_SYSCFG_EXTI_LINE13
  *         @arg @ref LL_SYSCFG_EXTI_LINE14
  *         @arg @ref LL_SYSCFG_EXTI_LINE15
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
{
  MODIFY_REG(SYSCFG->EXTICR[Line & 0xFFU], (Line >> 16U), Port << POSITION_VAL((Line >> 16U)));
}

/**
  * @brief  Get the configured defined for specific EXTI Line
  * @rmtoll SYSCFG_EXTICR1 EXTIx         LL_SYSCFG_GetEXTISource\n
  *         SYSCFG_EXTICR2 EXTIx         LL_SYSCFG_GetEXTISource\n
  *         SYSCFG_EXTICR3 EXTIx         LL_SYSCFG_GetEXTISource\n
  *         SYSCFG_EXTICR4 EXTIx         LL_SYSCFG_GetEXTISource
  * @param  Line This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_LINE0
  *         @arg @ref LL_SYSCFG_EXTI_LINE1
  *         @arg @ref LL_SYSCFG_EXTI_LINE2
  *         @arg @ref LL_SYSCFG_EXTI_LINE3
  *         @arg @ref LL_SYSCFG_EXTI_LINE4
  *         @arg @ref LL_SYSCFG_EXTI_LINE5
  *         @arg @ref LL_SYSCFG_EXTI_LINE6
  *         @arg @ref LL_SYSCFG_EXTI_LINE7
  *         @arg @ref LL_SYSCFG_EXTI_LINE8
  *         @arg @ref LL_SYSCFG_EXTI_LINE9
  *         @arg @ref LL_SYSCFG_EXTI_LINE10
  *         @arg @ref LL_SYSCFG_EXTI_LINE11
  *         @arg @ref LL_SYSCFG_EXTI_LINE12
  *         @arg @ref LL_SYSCFG_EXTI_LINE13
  *         @arg @ref LL_SYSCFG_EXTI_LINE14
  *         @arg @ref LL_SYSCFG_EXTI_LINE15
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_PORTA
  *         @arg @ref LL_SYSCFG_EXTI_PORTB
  *         @arg @ref LL_SYSCFG_EXTI_PORTC
  *         @arg @ref LL_SYSCFG_EXTI_PORTD
  *         @arg @ref LL_SYSCFG_EXTI_PORTE
  *         @arg @ref LL_SYSCFG_EXTI_PORTF
  *         @arg @ref LL_SYSCFG_EXTI_PORTG
  *         @arg @ref LL_SYSCFG_EXTI_PORTH
  *         @arg @ref LL_SYSCFG_EXTI_PORTI
  *         @arg @ref LL_SYSCFG_EXTI_PORTJ
  *         @arg @ref LL_SYSCFG_EXTI_PORTK
  *         (*) value not defined in all devices
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
{
  return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFFU], (Line >> 16U)) >> POSITION_VAL(Line >> 16U));
}

#if defined(SYSCFG_CBR_CLL)
/**
  * @brief  Set connections to TIM1/8/15/16/17 Break inputs
  *         SYSCFG_CBR CLL             LL_SYSCFG_SetTIMBreakInputs\n
  *         SYSCFG_CBR PVDL            LL_SYSCFG_SetTIMBreakInputs
  * @param  Break This parameter can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
  *         @arg @ref LL_SYSCFG_TIMBREAK_PVD
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
{
  MODIFY_REG(SYSCFG->CBR, SYSCFG_CBR_CLL | SYSCFG_CBR_PVDL, Break);
}

/**
  * @brief  Get connections to TIM1/8/15/16/17 Break inputs
  *         SYSCFG_CBR CLL             LL_SYSCFG_GetTIMBreakInputs\n
  *         SYSCFG_CBR PVDL            LL_SYSCFG_GetTIMBreakInputs
  * @retval Returned value can be can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
  *         @arg @ref LL_SYSCFG_TIMBREAK_PVD
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL | SYSCFG_CBR_PVDL));
}
#endif /* SYSCFG_CBR_CLL */

/**
  * @}
  */

/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
  * @{
  */

/**
  * @brief  Return the device identifier
  * @note For STM32F75xxx and STM32F74xxx devices, the device ID is 0x449
  * @note For STM32F77xxx and STM32F76xxx devices, the device ID is 0x451
  * @note For STM32F72xxx and STM32F73xxx devices, the device ID is 0x452
  * @rmtoll DBGMCU_IDCODE DEV_ID        LL_DBGMCU_GetDeviceID
  * @retval Values between Min_Data=0x00 and Max_Data=0xFFF
  */
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
{
  return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
}

/**
  * @brief  Return the device revision identifier
  * @note This field indicates the revision of the device.
          For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001
  * @rmtoll DBGMCU_IDCODE REV_ID        LL_DBGMCU_GetRevisionID
  * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
  */
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
  return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
}

/**
  * @brief  Enable the Debug Module during SLEEP mode
  * @rmtoll DBGMCU_CR    DBG_SLEEP     LL_DBGMCU_EnableDBGSleepMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}

/**
  * @brief  Disable the Debug Module during SLEEP mode
  * @rmtoll DBGMCU_CR    DBG_SLEEP     LL_DBGMCU_DisableDBGSleepMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}

/**
  * @brief  Enable the Debug Module during STOP mode
  * @rmtoll DBGMCU_CR    DBG_STOP      LL_DBGMCU_EnableDBGStopMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}

/**
  * @brief  Disable the Debug Module during STOP mode
  * @rmtoll DBGMCU_CR    DBG_STOP      LL_DBGMCU_DisableDBGStopMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}

/**
  * @brief  Enable the Debug Module during STANDBY mode
  * @rmtoll DBGMCU_CR    DBG_STANDBY   LL_DBGMCU_EnableDBGStandbyMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}

/**
  * @brief  Disable the Debug Module during STANDBY mode
  * @rmtoll DBGMCU_CR    DBG_STANDBY   LL_DBGMCU_DisableDBGStandbyMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}

/**
  * @brief  Set Trace pin assignment control
  * @rmtoll DBGMCU_CR    TRACE_IOEN    LL_DBGMCU_SetTracePinAssignment\n
  *         DBGMCU_CR    TRACE_MODE    LL_DBGMCU_SetTracePinAssignment
  * @param  PinAssignment This parameter can be one of the following values:
  *         @arg @ref LL_DBGMCU_TRACE_NONE
  *         @arg @ref LL_DBGMCU_TRACE_ASYNCH
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
  MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}

/**
  * @brief  Get Trace pin assignment control
  * @rmtoll DBGMCU_CR    TRACE_IOEN    LL_DBGMCU_GetTracePinAssignment\n
  *         DBGMCU_CR    TRACE_MODE    LL_DBGMCU_GetTracePinAssignment
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DBGMCU_TRACE_NONE
  *         @arg @ref LL_DBGMCU_TRACE_ASYNCH
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
  */
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
{
  return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}

/**
  * @brief  Freeze APB1 peripherals (group1 peripherals)
  * @rmtoll DBGMCU_APB1_FZ      DBG_TIM2_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM3_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM4_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM5_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM6_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM7_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM12_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM13_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM14_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_LPTIM1_STOP         LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_RTC_STOP            LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_WWDG_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_IWDG_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C1_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C2_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C3_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C4_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN1_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN2_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN3_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
{
  SET_BIT(DBGMCU->APB1FZ, Periphs);
}

/**
  * @brief  Unfreeze APB1 peripherals (group1 peripherals)
  * @rmtoll DBGMCU_APB1_FZ      DBG_TIM2_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM3_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM4_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM5_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM6_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM7_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM12_STOP          LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM13_STOP          LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM14_STOP          LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_LPTIM1_STOP         LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_RTC_STOP            LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_WWDG_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_IWDG_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C1_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C2_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C3_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C4_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN1_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN2_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN3_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
{
  CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
}

/**
  * @brief  Freeze APB2 peripherals
  * @rmtoll DBGMCU_APB2_FZ      DBG_TIM1_STOP    LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM8_STOP    LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM9_STOP    LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM10_STOP   LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM11_STOP   LL_DBGMCU_APB2_GRP1_FreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
  *
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
{
  SET_BIT(DBGMCU->APB2FZ, Periphs);
}

/**
  * @brief  Unfreeze APB2 peripherals
  * @rmtoll DBGMCU_APB2_FZ      DBG_TIM1_STOP    LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM8_STOP    LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM9_STOP    LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM10_STOP   LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM11_STOP   LL_DBGMCU_APB2_GRP1_UnFreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
  *
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
{
  CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EF_FLASH FLASH
  * @{
  */

/**
  * @brief  Set FLASH Latency
  * @rmtoll FLASH_ACR    LATENCY       LL_FLASH_SetLatency
  * @param  Latency This parameter can be one of the following values:
  *         @arg @ref LL_FLASH_LATENCY_0
  *         @arg @ref LL_FLASH_LATENCY_1
  *         @arg @ref LL_FLASH_LATENCY_2
  *         @arg @ref LL_FLASH_LATENCY_3
  *         @arg @ref LL_FLASH_LATENCY_4
  *         @arg @ref LL_FLASH_LATENCY_5
  *         @arg @ref LL_FLASH_LATENCY_6
  *         @arg @ref LL_FLASH_LATENCY_7
  *         @arg @ref LL_FLASH_LATENCY_8
  *         @arg @ref LL_FLASH_LATENCY_9
  *         @arg @ref LL_FLASH_LATENCY_10
  *         @arg @ref LL_FLASH_LATENCY_11
  *         @arg @ref LL_FLASH_LATENCY_12
  *         @arg @ref LL_FLASH_LATENCY_13
  *         @arg @ref LL_FLASH_LATENCY_14
  *         @arg @ref LL_FLASH_LATENCY_15
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
  MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}

/**
  * @brief  Get FLASH Latency
  * @rmtoll FLASH_ACR    LATENCY       LL_FLASH_GetLatency
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_FLASH_LATENCY_0
  *         @arg @ref LL_FLASH_LATENCY_1
  *         @arg @ref LL_FLASH_LATENCY_2
  *         @arg @ref LL_FLASH_LATENCY_3
  *         @arg @ref LL_FLASH_LATENCY_4
  *         @arg @ref LL_FLASH_LATENCY_5
  *         @arg @ref LL_FLASH_LATENCY_6
  *         @arg @ref LL_FLASH_LATENCY_7
  *         @arg @ref LL_FLASH_LATENCY_8
  *         @arg @ref LL_FLASH_LATENCY_9
  *         @arg @ref LL_FLASH_LATENCY_10
  *         @arg @ref LL_FLASH_LATENCY_11
  *         @arg @ref LL_FLASH_LATENCY_12
  *         @arg @ref LL_FLASH_LATENCY_13
  *         @arg @ref LL_FLASH_LATENCY_14
  *         @arg @ref LL_FLASH_LATENCY_15
  */
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
  return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}

/**
  * @brief  Enable Prefetch
  * @rmtoll FLASH_ACR    PRFTEN        LL_FLASH_EnablePrefetch
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}

/**
  * @brief  Disable Prefetch
  * @rmtoll FLASH_ACR    PRFTEN        LL_FLASH_DisablePrefetch
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}

/**
  * @brief  Check if Prefetch buffer is enabled
  * @rmtoll FLASH_ACR    PRFTEN        LL_FLASH_IsPrefetchEnabled
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
{
  return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN));
}


/**
  * @brief  Enable ART Accelerator
  * @rmtoll FLASH_ACR    ARTEN      LL_FLASH_EnableART
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnableART(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN);
}

/**
  * @brief  Disable ART Accelerator
  * @rmtoll FLASH_ACR    ARTEN      LL_FLASH_DisableART
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisableART(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN);
}

/**
  * @brief  Enable ART Reset
  * @rmtoll FLASH_ACR    ARTRST      LL_FLASH_EnableARTReset
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnableARTReset(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_ARTRST);
}

/**
  * @brief  Disable ART Reset
  * @rmtoll FLASH_ACR    ARTRST      LL_FLASH_DisableARTReset
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisableARTReset(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTRST);
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F7xx_LL_SYSTEM_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/