| /** |
| ****************************************************************************** |
| * @file stm32g4xx_ll_dma.h |
| * @author MCD Application Team |
| * @brief Header file of DMA LL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32G4xx_LL_DMA_H |
| #define __STM32G4xx_LL_DMA_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g4xx.h" |
| #include "stm32g4xx_ll_dmamux.h" |
| |
| /** @addtogroup STM32G4xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (DMA1) || defined (DMA2) |
| |
| /** @defgroup DMA_LL DMA |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Private_Variables DMA Private Variables |
| * @{ |
| */ |
| /* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ |
| static const uint8_t CHANNEL_OFFSET_TAB[] = |
| { |
| (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE) |
| #if defined (DMA1_Channel7) |
| , |
| (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE) |
| #endif /* DMA1_Channel7 */ |
| #if defined (DMA1_Channel8) |
| , |
| (uint8_t)(DMA1_Channel8_BASE - DMA1_BASE) |
| #endif /* DMA1_Channel8 */ |
| }; |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Private_Constants DMA Private Constants |
| * @{ |
| */ |
| /* Define used to get CSELR register offset */ |
| #define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE) |
| |
| /* Defines used for the bit position in the register and perform offsets */ |
| #define DMA_POSITION_CSELR_CXS POSITION_VAL(DMA_CSELR_C1S << ((Channel-1U)*4U)) |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup DMA_LL_Private_Macros DMA Private Macros |
| * @{ |
| */ |
| /** |
| * @} |
| */ |
| #endif /*USE_FULL_LL_DRIVER*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup DMA_LL_ES_INIT DMA Exported Init structure |
| * @{ |
| */ |
| typedef struct |
| { |
| uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer |
| or as Source base address in case of memory to memory transfer direction. |
| |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ |
| |
| uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer |
| or as Destination base address in case of memory to memory transfer direction. |
| |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ |
| |
| uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, |
| from memory to memory or from peripheral to memory. |
| This parameter can be a value of @ref DMA_LL_EC_DIRECTION |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ |
| |
| uint32_t Mode; /*!< Specifies the normal or circular operation mode. |
| This parameter can be a value of @ref DMA_LL_EC_MODE |
| @note: The circular buffer mode cannot be used if the memory to memory |
| data transfer direction is configured on the selected Channel |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ |
| |
| uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction |
| is incremented or not. |
| This parameter can be a value of @ref DMA_LL_EC_PERIPH |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ |
| |
| uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction |
| is incremented or not. |
| This parameter can be a value of @ref DMA_LL_EC_MEMORY |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ |
| |
| uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) |
| in case of memory to memory transfer direction. |
| This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ |
| |
| uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) |
| in case of memory to memory transfer direction. |
| This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ |
| |
| uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. |
| The data unit is equal to the source buffer configuration set in PeripheralSize |
| or MemorySize parameters depending in the transfer direction. |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ |
| |
| uint32_t PeriphRequest; /*!< Specifies the peripheral request. |
| This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ |
| |
| uint32_t Priority; /*!< Specifies the channel priority level. |
| This parameter can be a value of @ref DMA_LL_EC_PRIORITY |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ |
| |
| } LL_DMA_InitTypeDef; |
| /** |
| * @} |
| */ |
| #endif /*USE_FULL_LL_DRIVER*/ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Exported_Constants DMA Exported Constants |
| * @{ |
| */ |
| /** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines |
| * @brief Flags defines which can be used with LL_DMA_WriteReg function |
| * @{ |
| */ |
| #define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ |
| #define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ |
| #define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ |
| #define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ |
| #define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ |
| #define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ |
| #define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ |
| #define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ |
| #define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ |
| #define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ |
| #define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ |
| #define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ |
| #if defined (DMA1_Channel7) |
| #define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ |
| #define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ |
| #endif /* DMA1_Channel7 */ |
| #if defined (DMA1_Channel8) |
| #define LL_DMA_IFCR_CGIF8 DMA_IFCR_CGIF8 /*!< Channel 8 global flag */ |
| #define LL_DMA_IFCR_CTCIF8 DMA_IFCR_CTCIF8 /*!< Channel 8 transfer complete flag */ |
| #define LL_DMA_IFCR_CHTIF8 DMA_IFCR_CHTIF8 /*!< Channel 8 half transfer flag */ |
| #define LL_DMA_IFCR_CTEIF8 DMA_IFCR_CTEIF8 /*!< Channel 8 transfer error flag */ |
| #endif /* DMA1_Channel8 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines |
| * @brief Flags defines which can be used with LL_DMA_ReadReg function |
| * @{ |
| */ |
| #define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ |
| #define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ |
| #define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ |
| #define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ |
| #define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ |
| #define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ |
| #define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ |
| #define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ |
| #define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ |
| #define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ |
| #define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ |
| #define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ |
| #define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ |
| #define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ |
| #define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ |
| #define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ |
| #define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ |
| #define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ |
| #if defined (DMA1_Channel7) |
| #define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ |
| #define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ |
| #define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ |
| #endif /* DMA1_Channel7 */ |
| #if defined (DMA1_Channel8) |
| #define LL_DMA_ISR_GIF8 DMA_ISR_GIF8 /*!< Channel 8 global flag */ |
| #define LL_DMA_ISR_TCIF8 DMA_ISR_TCIF8 /*!< Channel 8 transfer complete flag */ |
| #define LL_DMA_ISR_HTIF8 DMA_ISR_HTIF8 /*!< Channel 8 half transfer flag */ |
| #define LL_DMA_ISR_TEIF8 DMA_ISR_TEIF8 /*!< Channel 8 transfer error flag */ |
| #endif /* DMA1_Channel8 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_IT IT Defines |
| * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions |
| * @{ |
| */ |
| #define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ |
| #define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ |
| #define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_CHANNEL CHANNEL |
| * @{ |
| */ |
| #define LL_DMA_CHANNEL_1 0x00000000U /*!< DMA Channel 1 */ |
| #define LL_DMA_CHANNEL_2 0x00000001U /*!< DMA Channel 2 */ |
| #define LL_DMA_CHANNEL_3 0x00000002U /*!< DMA Channel 3 */ |
| #define LL_DMA_CHANNEL_4 0x00000003U /*!< DMA Channel 4 */ |
| #define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */ |
| #define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */ |
| #if defined (DMA1_Channel7) |
| #define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */ |
| #endif /* DMA1_Channel7 */ |
| #if defined (DMA1_Channel8) |
| #define LL_DMA_CHANNEL_8 0x00000007U /*!< DMA Channel 8 */ |
| #endif /* DMA1_Channel8 */ |
| #if defined(USE_FULL_LL_DRIVER) |
| #define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ |
| #endif /*USE_FULL_LL_DRIVER*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_DIRECTION Transfer Direction |
| * @{ |
| */ |
| #define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ |
| #define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ |
| #define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MODE Transfer mode |
| * @{ |
| */ |
| #define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ |
| #define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode |
| * @{ |
| */ |
| #define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ |
| #define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MEMORY Memory increment mode |
| * @{ |
| */ |
| #define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ |
| #define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment |
| * @{ |
| */ |
| #define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ |
| #define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ |
| #define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment |
| * @{ |
| */ |
| #define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ |
| #define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ |
| #define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level |
| * @{ |
| */ |
| #define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ |
| #define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ |
| #define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ |
| #define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Exported_Macros DMA Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros |
| * @{ |
| */ |
| /** |
| * @brief Write a value in DMA register |
| * @param __INSTANCE__ DMA Instance |
| * @param __REG__ Register to be written |
| * @param __VALUE__ Value to be written in the register |
| * @retval None |
| */ |
| #define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) |
| |
| /** |
| * @brief Read a value in DMA register |
| * @param __INSTANCE__ DMA Instance |
| * @param __REG__ Register to be read |
| * @retval Register value |
| */ |
| #define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely |
| * @{ |
| */ |
| /** |
| * @brief Convert DMAx_Channely into DMAx |
| * @param __CHANNEL_INSTANCE__ DMAx_Channely |
| * @retval DMAx |
| */ |
| #if defined (DMA1_Channel8) |
| #define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ |
| (((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel8)) ? DMA2 : DMA1) |
| #else |
| #define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ |
| (((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel6)) ? DMA2 : DMA1) |
| #endif /* DMA1_Channel8 */ |
| /** |
| * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y |
| * @param __CHANNEL_INSTANCE__ DMAx_Channely |
| * @retval LL_DMA_CHANNEL_y |
| */ |
| #if defined (DMA1_Channel8) |
| #define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ |
| (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel7)) ? LL_DMA_CHANNEL_7 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel7)) ? LL_DMA_CHANNEL_7 : \ |
| LL_DMA_CHANNEL_8) |
| #else |
| #define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ |
| (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ |
| LL_DMA_CHANNEL_6) |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely |
| * @param __DMA_INSTANCE__ DMAx |
| * @param __CHANNEL__ LL_DMA_CHANNEL_y |
| * @retval DMAx_Channely |
| */ |
| #if defined (DMA1_Channel8) |
| #define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ |
| ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA2_Channel7 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_8))) ? DMA1_Channel8 : \ |
| DMA2_Channel8) |
| #else |
| #define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ |
| ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ |
| DMA2_Channel6) |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup DMA_LL_EF_Configuration Configuration |
| * @{ |
| */ |
| /** |
| * @brief Enable DMA channel. |
| * @rmtoll CCR EN LL_DMA_EnableChannel |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_EN); |
| } |
| |
| /** |
| * @brief Disable DMA channel. |
| * @rmtoll CCR EN LL_DMA_DisableChannel |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_EN); |
| } |
| |
| /** |
| * @brief Check if DMA channel is enabled or disabled. |
| * @rmtoll CCR EN LL_DMA_IsEnabledChannel |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Configure all parameters link to DMA transfer. |
| * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n |
| * CCR MEM2MEM LL_DMA_ConfigTransfer\n |
| * CCR CIRC LL_DMA_ConfigTransfer\n |
| * CCR PINC LL_DMA_ConfigTransfer\n |
| * CCR MINC LL_DMA_ConfigTransfer\n |
| * CCR PSIZE LL_DMA_ConfigTransfer\n |
| * CCR MSIZE LL_DMA_ConfigTransfer\n |
| * CCR PL LL_DMA_ConfigTransfer |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR |
| * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT |
| * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT |
| * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD |
| * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD |
| * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, |
| Configuration); |
| } |
| |
| /** |
| * @brief Set Data transfer direction (read from peripheral or from memory). |
| * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n |
| * CCR MEM2MEM LL_DMA_SetDataTransferDirection |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param Direction This parameter can be one of the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); |
| } |
| |
| /** |
| * @brief Get Data transfer direction (read from peripheral or from memory). |
| * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n |
| * CCR MEM2MEM LL_DMA_GetDataTransferDirection |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_DIR | DMA_CCR_MEM2MEM)); |
| } |
| |
| /** |
| * @brief Set DMA mode circular or normal. |
| * @note The circular buffer mode cannot be used if the memory-to-memory |
| * data transfer is configured on the selected Channel. |
| * @rmtoll CCR CIRC LL_DMA_SetMode |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param Mode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MODE_NORMAL |
| * @arg @ref LL_DMA_MODE_CIRCULAR |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_CIRC, |
| Mode); |
| } |
| |
| /** |
| * @brief Get DMA mode circular or normal. |
| * @rmtoll CCR CIRC LL_DMA_GetMode |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MODE_NORMAL |
| * @arg @ref LL_DMA_MODE_CIRCULAR |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_CIRC)); |
| } |
| |
| /** |
| * @brief Set Peripheral increment mode. |
| * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PERIPH_INCREMENT |
| * @arg @ref LL_DMA_PERIPH_NOINCREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_PINC, |
| PeriphOrM2MSrcIncMode); |
| } |
| |
| /** |
| * @brief Get Peripheral increment mode. |
| * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PERIPH_INCREMENT |
| * @arg @ref LL_DMA_PERIPH_NOINCREMENT |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_PINC)); |
| } |
| |
| /** |
| * @brief Set Memory increment mode. |
| * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MEMORY_INCREMENT |
| * @arg @ref LL_DMA_MEMORY_NOINCREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_MINC, |
| MemoryOrM2MDstIncMode); |
| } |
| |
| /** |
| * @brief Get Memory increment mode. |
| * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MEMORY_INCREMENT |
| * @arg @ref LL_DMA_MEMORY_NOINCREMENT |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_MINC)); |
| } |
| |
| /** |
| * @brief Set Peripheral size. |
| * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PDATAALIGN_BYTE |
| * @arg @ref LL_DMA_PDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_PDATAALIGN_WORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_PSIZE, |
| PeriphOrM2MSrcDataSize); |
| } |
| |
| /** |
| * @brief Get Peripheral size. |
| * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PDATAALIGN_BYTE |
| * @arg @ref LL_DMA_PDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_PDATAALIGN_WORD |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_PSIZE)); |
| } |
| |
| /** |
| * @brief Set Memory size. |
| * @rmtoll CCR MSIZE LL_DMA_SetMemorySize |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MDATAALIGN_BYTE |
| * @arg @ref LL_DMA_MDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_MDATAALIGN_WORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_MSIZE, |
| MemoryOrM2MDstDataSize); |
| } |
| |
| /** |
| * @brief Get Memory size. |
| * @rmtoll CCR MSIZE LL_DMA_GetMemorySize |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MDATAALIGN_BYTE |
| * @arg @ref LL_DMA_MDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_MDATAALIGN_WORD |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_MSIZE)); |
| } |
| |
| /** |
| * @brief Set Channel priority level. |
| * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param Priority This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PRIORITY_LOW |
| * @arg @ref LL_DMA_PRIORITY_MEDIUM |
| * @arg @ref LL_DMA_PRIORITY_HIGH |
| * @arg @ref LL_DMA_PRIORITY_VERYHIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_PL, |
| Priority); |
| } |
| |
| /** |
| * @brief Get Channel priority level. |
| * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PRIORITY_LOW |
| * @arg @ref LL_DMA_PRIORITY_MEDIUM |
| * @arg @ref LL_DMA_PRIORITY_HIGH |
| * @arg @ref LL_DMA_PRIORITY_VERYHIGH |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_PL)); |
| } |
| |
| /** |
| * @brief Set Number of data to transfer. |
| * @note This action has no effect if |
| * channel is enabled. |
| * @rmtoll CNDTR NDT LL_DMA_SetDataLength |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CNDTR, |
| DMA_CNDTR_NDT, NbData); |
| } |
| |
| /** |
| * @brief Get Number of data to transfer. |
| * @note Once the channel is enabled, the return value indicate the |
| * remaining bytes to be transmitted. |
| * @rmtoll CNDTR NDT LL_DMA_GetDataLength |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CNDTR, |
| DMA_CNDTR_NDT)); |
| } |
| |
| /** |
| * @brief Configure the Source and Destination addresses. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr). |
| * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n |
| * CMAR MA LL_DMA_ConfigAddresses |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @param Direction This parameter can be one of the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, |
| uint32_t DstAddress, uint32_t Direction) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| |
| /* Direction Memory to Periph */ |
| if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) |
| { |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, SrcAddress); |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, DstAddress); |
| } |
| /* Direction Periph to Memory and Memory to Memory */ |
| else |
| { |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, SrcAddress); |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, DstAddress); |
| } |
| } |
| |
| /** |
| * @brief Set the Memory address. |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @rmtoll CMAR MA LL_DMA_SetMemoryAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, MemoryAddress); |
| } |
| |
| /** |
| * @brief Set the Peripheral address. |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @rmtoll CPAR PA LL_DMA_SetPeriphAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, PeriphAddress); |
| } |
| |
| /** |
| * @brief Get Memory address. |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @rmtoll CMAR MA LL_DMA_GetMemoryAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR)); |
| } |
| |
| /** |
| * @brief Get Peripheral address. |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @rmtoll CPAR PA LL_DMA_GetPeriphAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR)); |
| } |
| |
| /** |
| * @brief Set the Memory to Memory Source address. |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, MemoryAddress); |
| } |
| |
| /** |
| * @brief Set the Memory to Memory Destination address. |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, MemoryAddress); |
| } |
| |
| /** |
| * @brief Get the Memory to Memory Source address. |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR)); |
| } |
| |
| /** |
| * @brief Get the Memory to Memory Destination address. |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR)); |
| } |
| |
| /** |
| * @brief Set DMA request for DMA instance on Channel x. |
| * @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection. |
| * @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n |
| * CSELR C2S LL_DMA_SetPeriphRequest\n |
| * CSELR C3S LL_DMA_SetPeriphRequest\n |
| * CSELR C4S LL_DMA_SetPeriphRequest\n |
| * CSELR C5S LL_DMA_SetPeriphRequest\n |
| * CSELR C6S LL_DMA_SetPeriphRequest\n |
| * CSELR C7S LL_DMA_SetPeriphRequest |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @param PeriphRequest This parameter can be one of the following values: |
| * @arg @ref LL_DMAMUX_REQ_MEM2MEM |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR0 |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR1 |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR2 |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR3 |
| * @arg @ref LL_DMAMUX_REQ_ADC1 |
| * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 |
| * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM6_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM7_UP |
| * @arg @ref LL_DMAMUX_REQ_SPI1_RX |
| * @arg @ref LL_DMAMUX_REQ_SPI1_TX |
| * @arg @ref LL_DMAMUX_REQ_SPI2_RX |
| * @arg @ref LL_DMAMUX_REQ_SPI2_TX |
| * @arg @ref LL_DMAMUX_REQ_SPI3_RX |
| * @arg @ref LL_DMAMUX_REQ_SPI3_TX |
| * @arg @ref LL_DMAMUX_REQ_I2C1_RX |
| * @arg @ref LL_DMAMUX_REQ_I2C1_TX |
| * @arg @ref LL_DMAMUX_REQ_I2C2_RX |
| * @arg @ref LL_DMAMUX_REQ_I2C2_TX |
| * @arg @ref LL_DMAMUX_REQ_I2C3_RX |
| * @arg @ref LL_DMAMUX_REQ_I2C3_TX (*) |
| * @arg @ref LL_DMAMUX_REQ_I2C4_RX (*) |
| * @arg @ref LL_DMAMUX_REQ_I2C4_TX |
| * @arg @ref LL_DMAMUX_REQ_USART1_RX |
| * @arg @ref LL_DMAMUX_REQ_USART1_TX |
| * @arg @ref LL_DMAMUX_REQ_USART2_RX |
| * @arg @ref LL_DMAMUX_REQ_USART2_TX |
| * @arg @ref LL_DMAMUX_REQ_USART3_RX |
| * @arg @ref LL_DMAMUX_REQ_USART3_TX |
| * @arg @ref LL_DMAMUX_REQ_UART4_RX |
| * @arg @ref LL_DMAMUX_REQ_UART4_TX |
| * @arg @ref LL_DMAMUX_REQ_UART5_RX (*) |
| * @arg @ref LL_DMAMUX_REQ_UART5_TX (*) |
| * @arg @ref LL_DMAMUX_REQ_LPUART1_RX |
| * @arg @ref LL_DMAMUX_REQ_LPUART1_TX |
| * @arg @ref LL_DMAMUX_REQ_ADC2 |
| * @arg @ref LL_DMAMUX_REQ_ADC3 (*) |
| * @arg @ref LL_DMAMUX_REQ_ADC4 (*) |
| * @arg @ref LL_DMAMUX_REQ_ADC5 (*) |
| * @arg @ref LL_DMAMUX_REQ_QSPI (*) |
| * @arg @ref LL_DMAMUX_REQ_DAC2_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM1_COM |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM8_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM8_COM |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH2 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH3 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH4 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_UP (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_TRIG (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM15_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM15_COM |
| * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM16_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM17_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH2 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH3 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH4 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_UP (*) |
| * @arg @ref LL_DMAMUX_REQ_AES_IN |
| * @arg @ref LL_DMAMUX_REQ_AES_OUT |
| * @arg @ref LL_DMAMUX_REQ_TIM20_TRIG (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_COM (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_M (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_A (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_B (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_C (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_D (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_E (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_F (*) |
| * @arg @ref LL_DMAMUX_REQ_DAC3_CH1 |
| * @arg @ref LL_DMAMUX_REQ_DAC3_CH2 |
| * @arg @ref LL_DMAMUX_REQ_DAC4_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_DAC4_CH2 (*) |
| * @arg @ref LL_DMAMUX_REQ_SPI4_RX (*) |
| * @arg @ref LL_DMAMUX_REQ_SPI4_TX (*) |
| * @arg @ref LL_DMAMUX_REQ_SAI1_A |
| * @arg @ref LL_DMAMUX_REQ_SAI1_B |
| * @arg @ref LL_DMAMUX_REQ_FMAC_WRITE |
| * @arg @ref LL_DMAMUX_REQ_FMAC_READ |
| * @arg @ref LL_DMAMUX_REQ_CORDIC_WRITE |
| * @arg @ref LL_DMAMUX_REQ_CORDIC_READ |
| * @arg @ref LL_DMAMUX_REQ_UCPD1_RX |
| * @arg @ref LL_DMAMUX_REQ_UCPD1_TX |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest) |
| { |
| uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 8U); |
| MODIFY_REG((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID, PeriphRequest); |
| } |
| |
| /** |
| * @brief Get DMA request for DMA instance on Channel x. |
| * @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n |
| * CSELR C2S LL_DMA_GetPeriphRequest\n |
| * CSELR C3S LL_DMA_GetPeriphRequest\n |
| * CSELR C4S LL_DMA_GetPeriphRequest\n |
| * CSELR C5S LL_DMA_GetPeriphRequest\n |
| * CSELR C6S LL_DMA_GetPeriphRequest\n |
| * CSELR C7S LL_DMA_GetPeriphRequest |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMAMUX_REQ_MEM2MEM |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR0 |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR1 |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR2 |
| * @arg @ref LL_DMAMUX_REQ_GENERATOR3 |
| * @arg @ref LL_DMAMUX_REQ_ADC1 |
| * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 |
| * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM6_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM7_UP |
| * @arg @ref LL_DMAMUX_REQ_SPI1_RX |
| * @arg @ref LL_DMAMUX_REQ_SPI1_TX |
| * @arg @ref LL_DMAMUX_REQ_SPI2_RX |
| * @arg @ref LL_DMAMUX_REQ_SPI2_TX |
| * @arg @ref LL_DMAMUX_REQ_SPI3_RX |
| * @arg @ref LL_DMAMUX_REQ_SPI3_TX |
| * @arg @ref LL_DMAMUX_REQ_I2C1_RX |
| * @arg @ref LL_DMAMUX_REQ_I2C1_TX |
| * @arg @ref LL_DMAMUX_REQ_I2C2_RX |
| * @arg @ref LL_DMAMUX_REQ_I2C2_TX |
| * @arg @ref LL_DMAMUX_REQ_I2C3_RX |
| * @arg @ref LL_DMAMUX_REQ_I2C3_TX (*) |
| * @arg @ref LL_DMAMUX_REQ_I2C4_RX (*) |
| * @arg @ref LL_DMAMUX_REQ_I2C4_TX |
| * @arg @ref LL_DMAMUX_REQ_USART1_RX |
| * @arg @ref LL_DMAMUX_REQ_USART1_TX |
| * @arg @ref LL_DMAMUX_REQ_USART2_RX |
| * @arg @ref LL_DMAMUX_REQ_USART2_TX |
| * @arg @ref LL_DMAMUX_REQ_USART3_RX |
| * @arg @ref LL_DMAMUX_REQ_USART3_TX |
| * @arg @ref LL_DMAMUX_REQ_UART4_RX |
| * @arg @ref LL_DMAMUX_REQ_UART4_TX |
| * @arg @ref LL_DMAMUX_REQ_UART5_RX (*) |
| * @arg @ref LL_DMAMUX_REQ_UART5_TX (*) |
| * @arg @ref LL_DMAMUX_REQ_LPUART1_RX |
| * @arg @ref LL_DMAMUX_REQ_LPUART1_TX |
| * @arg @ref LL_DMAMUX_REQ_ADC2 |
| * @arg @ref LL_DMAMUX_REQ_ADC3 (*) |
| * @arg @ref LL_DMAMUX_REQ_ADC4 (*) |
| * @arg @ref LL_DMAMUX_REQ_ADC5 (*) |
| * @arg @ref LL_DMAMUX_REQ_QSPI (*) |
| * @arg @ref LL_DMAMUX_REQ_DAC2_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM1_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM1_COM |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM8_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM8_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM8_COM |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM2_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM3_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH2 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH3 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_CH4 |
| * @arg @ref LL_DMAMUX_REQ_TIM4_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH2 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH3 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_CH4 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_UP (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM5_TRIG (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM15_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG |
| * @arg @ref LL_DMAMUX_REQ_TIM15_COM |
| * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM16_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 |
| * @arg @ref LL_DMAMUX_REQ_TIM17_UP |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH2 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH3 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_CH4 (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_UP (*) |
| * @arg @ref LL_DMAMUX_REQ_AES_IN |
| * @arg @ref LL_DMAMUX_REQ_AES_OUT |
| * @arg @ref LL_DMAMUX_REQ_TIM20_TRIG (*) |
| * @arg @ref LL_DMAMUX_REQ_TIM20_COM (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_M (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_A (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_B (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_C (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_D (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_E (*) |
| * @arg @ref LL_DMAMUX_REQ_HRTIM1_F (*) |
| * @arg @ref LL_DMAMUX_REQ_DAC3_CH1 |
| * @arg @ref LL_DMAMUX_REQ_DAC3_CH2 |
| * @arg @ref LL_DMAMUX_REQ_DAC4_CH1 (*) |
| * @arg @ref LL_DMAMUX_REQ_DAC4_CH2 (*) |
| * @arg @ref LL_DMAMUX_REQ_SPI4_RX (*) |
| * @arg @ref LL_DMAMUX_REQ_SPI4_TX (*) |
| * @arg @ref LL_DMAMUX_REQ_SAI1_A |
| * @arg @ref LL_DMAMUX_REQ_SAI1_B |
| * @arg @ref LL_DMAMUX_REQ_FMAC_WRITE |
| * @arg @ref LL_DMAMUX_REQ_FMAC_READ |
| * @arg @ref LL_DMAMUX_REQ_CORDIC_WRITE |
| * @arg @ref LL_DMAMUX_REQ_CORDIC_READ |
| * @arg @ref LL_DMAMUX_REQ_UCPD1_RX |
| * @arg @ref LL_DMAMUX_REQ_UCPD1_TX |
| * (*) Not on all G4 devices |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 8U); |
| return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Get Channel 1 global interrupt flag. |
| * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 2 global interrupt flag. |
| * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 3 global interrupt flag. |
| * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 4 global interrupt flag. |
| * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 5 global interrupt flag. |
| * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 6 global interrupt flag. |
| * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Get Channel 7 global interrupt flag. |
| * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Get Channel 8 global interrupt flag. |
| * @rmtoll ISR GIF8 LL_DMA_IsActiveFlag_GI8 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI8(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF8) == (DMA_ISR_GIF8)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Get Channel 1 transfer complete flag. |
| * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 2 transfer complete flag. |
| * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 3 transfer complete flag. |
| * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 4 transfer complete flag. |
| * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 5 transfer complete flag. |
| * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 6 transfer complete flag. |
| * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Get Channel 7 transfer complete flag. |
| * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Get Channel 8 transfer complete flag. |
| * @rmtoll ISR TCIF8 LL_DMA_IsActiveFlag_TC8 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC8(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF8) == (DMA_ISR_TCIF8)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Get Channel 1 half transfer flag. |
| * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 2 half transfer flag. |
| * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 3 half transfer flag. |
| * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 4 half transfer flag. |
| * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 5 half transfer flag. |
| * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 6 half transfer flag. |
| * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); |
| } |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Get Channel 7 half transfer flag. |
| * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Get Channel 8 half transfer flag. |
| * @rmtoll ISR HTIF8 LL_DMA_IsActiveFlag_HT8 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT8(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF8) == (DMA_ISR_HTIF8)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Get Channel 1 transfer error flag. |
| * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 2 transfer error flag. |
| * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 3 transfer error flag. |
| * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 4 transfer error flag. |
| * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 5 transfer error flag. |
| * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get Channel 6 transfer error flag. |
| * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Get Channel 7 transfer error flag. |
| * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Get Channel 8 transfer error flag. |
| * @rmtoll ISR TEIF8 LL_DMA_IsActiveFlag_TE8 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE8(DMA_TypeDef *DMAx) |
| { |
| return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF8) == (DMA_ISR_TEIF8)) ? 1UL : 0UL); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Clear Channel 1 global interrupt flag. |
| * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); |
| } |
| |
| /** |
| * @brief Clear Channel 2 global interrupt flag. |
| * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); |
| } |
| |
| /** |
| * @brief Clear Channel 3 global interrupt flag. |
| * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); |
| } |
| |
| /** |
| * @brief Clear Channel 4 global interrupt flag. |
| * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); |
| } |
| |
| /** |
| * @brief Clear Channel 5 global interrupt flag. |
| * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); |
| } |
| |
| /** |
| * @brief Clear Channel 6 global interrupt flag. |
| * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Clear Channel 7 global interrupt flag. |
| * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Clear Channel 8 global interrupt flag. |
| * @rmtoll IFCR CGIF8 LL_DMA_ClearFlag_GI8 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_GI8(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF8); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Clear Channel 1 transfer complete flag. |
| * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); |
| } |
| |
| /** |
| * @brief Clear Channel 2 transfer complete flag. |
| * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); |
| } |
| |
| /** |
| * @brief Clear Channel 3 transfer complete flag. |
| * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); |
| } |
| |
| /** |
| * @brief Clear Channel 4 transfer complete flag. |
| * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); |
| } |
| |
| /** |
| * @brief Clear Channel 5 transfer complete flag. |
| * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); |
| } |
| |
| /** |
| * @brief Clear Channel 6 transfer complete flag. |
| * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Clear Channel 7 transfer complete flag. |
| * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Clear Channel 8 transfer complete flag. |
| * @rmtoll IFCR CTCIF8 LL_DMA_ClearFlag_TC8 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC8(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF8); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Clear Channel 1 half transfer flag. |
| * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); |
| } |
| |
| /** |
| * @brief Clear Channel 2 half transfer flag. |
| * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); |
| } |
| |
| /** |
| * @brief Clear Channel 3 half transfer flag. |
| * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); |
| } |
| |
| /** |
| * @brief Clear Channel 4 half transfer flag. |
| * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); |
| } |
| |
| /** |
| * @brief Clear Channel 5 half transfer flag. |
| * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); |
| } |
| |
| /** |
| * @brief Clear Channel 6 half transfer flag. |
| * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Clear Channel 7 half transfer flag. |
| * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Clear Channel 8 half transfer flag. |
| * @rmtoll IFCR CHTIF8 LL_DMA_ClearFlag_HT8 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT8(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF8); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @brief Clear Channel 1 transfer error flag. |
| * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); |
| } |
| |
| /** |
| * @brief Clear Channel 2 transfer error flag. |
| * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); |
| } |
| |
| /** |
| * @brief Clear Channel 3 transfer error flag. |
| * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); |
| } |
| |
| /** |
| * @brief Clear Channel 4 transfer error flag. |
| * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); |
| } |
| |
| /** |
| * @brief Clear Channel 5 transfer error flag. |
| * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); |
| } |
| |
| /** |
| * @brief Clear Channel 6 transfer error flag. |
| * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); |
| } |
| |
| #if defined (DMA1_Channel7) |
| /** |
| * @brief Clear Channel 7 transfer error flag. |
| * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); |
| } |
| #endif /* DMA1_Channel7 */ |
| |
| #if defined (DMA1_Channel8) |
| /** |
| * @brief Clear Channel 8 transfer error flag. |
| * @rmtoll IFCR CTEIF8 LL_DMA_ClearFlag_TE8 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE8(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF8); |
| } |
| #endif /* DMA1_Channel8 */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EF_IT_Management IT_Management |
| * @{ |
| */ |
| /** |
| * @brief Enable Transfer complete interrupt. |
| * @rmtoll CCR TCIE LL_DMA_EnableIT_TC |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TCIE); |
| } |
| |
| /** |
| * @brief Enable Half transfer interrupt. |
| * @rmtoll CCR HTIE LL_DMA_EnableIT_HT |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_HTIE); |
| } |
| |
| /** |
| * @brief Enable Transfer error interrupt. |
| * @rmtoll CCR TEIE LL_DMA_EnableIT_TE |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TEIE); |
| } |
| |
| /** |
| * @brief Disable Transfer complete interrupt. |
| * @rmtoll CCR TCIE LL_DMA_DisableIT_TC |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TCIE); |
| } |
| |
| /** |
| * @brief Disable Half transfer interrupt. |
| * @rmtoll CCR HTIE LL_DMA_DisableIT_HT |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_HTIE); |
| } |
| |
| /** |
| * @brief Disable Transfer error interrupt. |
| * @rmtoll CCR TEIE LL_DMA_DisableIT_TE |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TEIE); |
| } |
| |
| /** |
| * @brief Check if Transfer complete Interrupt is enabled. |
| * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if Half transfer Interrupt is enabled. |
| * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if Transfer error Interrupt is enabled. |
| * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE |
| * @param DMAx DMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 (*) |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * (*) Not on all G4 devices |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) |
| { |
| uint32_t dma_base_addr = (uint32_t)DMAx; |
| return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, |
| DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); |
| uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); |
| void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); |
| |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* DMA1 || DMA2 */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32G4xx_LL_DMA_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |