| /** |
| ****************************************************************************** |
| * @file stm32g4xx_hal_i2c_ex.c |
| * @author MCD Application Team |
| * @brief I2C Extended HAL module driver. |
| * This file provides firmware functions to manage the following |
| * functionalities of I2C Extended peripheral: |
| * + Extended features functions |
| * |
| @verbatim |
| ============================================================================== |
| ##### I2C peripheral Extended features ##### |
| ============================================================================== |
| |
| [..] Comparing to other previous devices, the I2C interface for STM32G4xx |
| devices contains the following additional features |
| |
| (+) Possibility to disable or enable Analog Noise Filter |
| (+) Use of a configured Digital Noise Filter |
| (+) Disable or enable wakeup from Stop mode(s) |
| (+) Disable or enable Fast Mode Plus |
| |
| ##### How to use this driver ##### |
| ============================================================================== |
| [..] This driver provides functions to configure Noise Filter and Wake Up Feature |
| (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() |
| (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() |
| (#) Configure the enable or disable of I2C Wake Up Mode using the functions : |
| (++) HAL_I2CEx_EnableWakeUp() |
| (++) HAL_I2CEx_DisableWakeUp() |
| (#) Configure the enable or disable of fast mode plus driving capability using the functions : |
| (++) HAL_I2CEx_EnableFastModePlus() |
| (++) HAL_I2CEx_DisableFastModePlus() |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g4xx_hal.h" |
| |
| /** @addtogroup STM32G4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup I2CEx I2CEx |
| * @brief I2C Extended HAL module driver |
| * @{ |
| */ |
| |
| #ifdef HAL_I2C_MODULE_ENABLED |
| |
| /* Private typedef -----------------------------------------------------------*/ |
| /* Private define ------------------------------------------------------------*/ |
| /* Private macro -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private function prototypes -----------------------------------------------*/ |
| /* Private functions ---------------------------------------------------------*/ |
| |
| /** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions |
| * @brief Extended features functions |
| * |
| @verbatim |
| =============================================================================== |
| ##### Extended features functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to: |
| (+) Configure Noise Filters |
| (+) Configure Wake Up Feature |
| (+) Configure Fast Mode Plus |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Configure I2C Analog noise filter. |
| * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains |
| * the configuration information for the specified I2Cx peripheral. |
| * @param AnalogFilter New state of the Analog filter. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) |
| { |
| /* Check the parameters */ |
| assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); |
| assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); |
| |
| if (hi2c->State == HAL_I2C_STATE_READY) |
| { |
| /* Process Locked */ |
| __HAL_LOCK(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_BUSY; |
| |
| /* Disable the selected I2C peripheral */ |
| __HAL_I2C_DISABLE(hi2c); |
| |
| /* Reset I2Cx ANOFF bit */ |
| hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); |
| |
| /* Set analog filter bit*/ |
| hi2c->Instance->CR1 |= AnalogFilter; |
| |
| __HAL_I2C_ENABLE(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hi2c); |
| |
| return HAL_OK; |
| } |
| else |
| { |
| return HAL_BUSY; |
| } |
| } |
| |
| /** |
| * @brief Configure I2C Digital noise filter. |
| * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains |
| * the configuration information for the specified I2Cx peripheral. |
| * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) |
| { |
| uint32_t tmpreg; |
| |
| /* Check the parameters */ |
| assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); |
| assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); |
| |
| if (hi2c->State == HAL_I2C_STATE_READY) |
| { |
| /* Process Locked */ |
| __HAL_LOCK(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_BUSY; |
| |
| /* Disable the selected I2C peripheral */ |
| __HAL_I2C_DISABLE(hi2c); |
| |
| /* Get the old register value */ |
| tmpreg = hi2c->Instance->CR1; |
| |
| /* Reset I2Cx DNF bits [11:8] */ |
| tmpreg &= ~(I2C_CR1_DNF); |
| |
| /* Set I2Cx DNF coefficient */ |
| tmpreg |= DigitalFilter << 8U; |
| |
| /* Store the new register value */ |
| hi2c->Instance->CR1 = tmpreg; |
| |
| __HAL_I2C_ENABLE(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hi2c); |
| |
| return HAL_OK; |
| } |
| else |
| { |
| return HAL_BUSY; |
| } |
| } |
| |
| /** |
| * @brief Enable I2C wakeup from Stop mode(s). |
| * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains |
| * the configuration information for the specified I2Cx peripheral. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) |
| { |
| /* Check the parameters */ |
| assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); |
| |
| if (hi2c->State == HAL_I2C_STATE_READY) |
| { |
| /* Process Locked */ |
| __HAL_LOCK(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_BUSY; |
| |
| /* Disable the selected I2C peripheral */ |
| __HAL_I2C_DISABLE(hi2c); |
| |
| /* Enable wakeup from stop mode */ |
| hi2c->Instance->CR1 |= I2C_CR1_WUPEN; |
| |
| __HAL_I2C_ENABLE(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hi2c); |
| |
| return HAL_OK; |
| } |
| else |
| { |
| return HAL_BUSY; |
| } |
| } |
| |
| /** |
| * @brief Disable I2C wakeup from Stop mode(s). |
| * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains |
| * the configuration information for the specified I2Cx peripheral. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) |
| { |
| /* Check the parameters */ |
| assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); |
| |
| if (hi2c->State == HAL_I2C_STATE_READY) |
| { |
| /* Process Locked */ |
| __HAL_LOCK(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_BUSY; |
| |
| /* Disable the selected I2C peripheral */ |
| __HAL_I2C_DISABLE(hi2c); |
| |
| /* Enable wakeup from stop mode */ |
| hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); |
| |
| __HAL_I2C_ENABLE(hi2c); |
| |
| hi2c->State = HAL_I2C_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hi2c); |
| |
| return HAL_OK; |
| } |
| else |
| { |
| return HAL_BUSY; |
| } |
| } |
| |
| /** |
| * @brief Enable the I2C fast mode plus driving capability. |
| * @param ConfigFastModePlus Selects the pin. |
| * This parameter can be one of the @ref I2CEx_FastModePlus values |
| * @note For I2C1, fast mode plus driving capability can be enabled on all selected |
| * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently |
| * on each one of the following pins PB6, PB7, PB8 and PB9. |
| * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability |
| * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. |
| * @note For all I2C2 pins fast mode plus driving capability can be enabled |
| * only by using I2C_FASTMODEPLUS_I2C2 parameter. |
| * @note For all I2C3 pins fast mode plus driving capability can be enabled |
| * only by using I2C_FASTMODEPLUS_I2C3 parameter. |
| * @note For all I2C4 pins fast mode plus driving capability can be enabled |
| * only by using I2C_FASTMODEPLUS_I2C4 parameter. |
| * @retval None |
| */ |
| void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) |
| { |
| /* Check the parameter */ |
| assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); |
| |
| /* Enable SYSCFG clock */ |
| __HAL_RCC_SYSCFG_CLK_ENABLE(); |
| |
| /* Enable fast mode plus driving capability for selected pin */ |
| SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); |
| } |
| |
| /** |
| * @brief Disable the I2C fast mode plus driving capability. |
| * @param ConfigFastModePlus Selects the pin. |
| * This parameter can be one of the @ref I2CEx_FastModePlus values |
| * @note For I2C1, fast mode plus driving capability can be disabled on all selected |
| * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently |
| * on each one of the following pins PB6, PB7, PB8 and PB9. |
| * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability |
| * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. |
| * @note For all I2C2 pins fast mode plus driving capability can be disabled |
| * only by using I2C_FASTMODEPLUS_I2C2 parameter. |
| * @note For all I2C3 pins fast mode plus driving capability can be disabled |
| * only by using I2C_FASTMODEPLUS_I2C3 parameter. |
| * @note For all I2C4 pins fast mode plus driving capability can be disabled |
| * only by using I2C_FASTMODEPLUS_I2C4 parameter. |
| * @retval None |
| */ |
| void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) |
| { |
| /* Check the parameter */ |
| assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); |
| |
| /* Enable SYSCFG clock */ |
| __HAL_RCC_SYSCFG_CLK_ENABLE(); |
| |
| /* Disable fast mode plus driving capability for selected pin */ |
| CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* HAL_I2C_MODULE_ENABLED */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |