| /** |
| ****************************************************************************** |
| * @file stm32h7xx_ll_bus.h |
| * @author MCD Application Team |
| * @version $VERSION$ |
| * @date $DATE$ |
| * @brief Header file of BUS LL module. |
| |
| @verbatim |
| ##### RCC Limitations ##### |
| ============================================================================== |
| [..] |
| A delay between an RCC peripheral clock enable and the effective peripheral |
| enabling should be taken into account in order to manage the peripheral read/write |
| from/to registers. |
| (+) This delay depends on the peripheral mapping. |
| (++) AHB & APB peripherals, 1 dummy read is necessary |
| |
| [..] |
| Workarounds: |
| (#) For AHB & APB peripherals, a dummy read to the peripheral register has been |
| inserted in each LL_{BUS}_GRP{x}_EnableClock() function. |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_LL_BUS_H |
| #define STM32H7xx_LL_BUS_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx.h" |
| |
| /** @addtogroup STM32H7xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(RCC) |
| |
| /** @defgroup BUS_LL BUS |
| * @{ |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Constants BUS Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB3_GRP1_PERIPH_MDMA RCC_AHB3ENR_MDMAEN |
| #define LL_AHB3_GRP1_PERIPH_DMA2D RCC_AHB3ENR_DMA2DEN |
| |
| #if defined(JPEG) |
| #define LL_AHB3_GRP1_PERIPH_JPGDEC RCC_AHB3ENR_JPGDECEN |
| #endif /* JPEG */ |
| |
| #define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN |
| #if defined(QUADSPI) |
| #define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN |
| #endif /* QUADSPI */ |
| #if defined(OCTOSPI1) || defined(OCTOSPI2) |
| #define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN |
| #define LL_AHB3_GRP1_PERIPH_OSPI2 RCC_AHB3ENR_OSPI2EN |
| #endif /*(OCTOSPI1) || (OCTOSPI2)*/ |
| #if defined(OCTOSPIM) |
| #define LL_AHB3_GRP1_PERIPH_OCTOSPIM RCC_AHB3ENR_IOMNGREN |
| #endif /* OCTOSPIM */ |
| #if defined(OTFDEC1) || defined(OTFDEC2) |
| #define LL_AHB3_GRP1_PERIPH_OTFDEC1 RCC_AHB3ENR_OTFDEC1EN |
| #define LL_AHB3_GRP1_PERIPH_OTFDEC2 RCC_AHB3ENR_OTFDEC2EN |
| #endif /* (OTFDEC1) || (OTFDEC2) */ |
| #if defined(GFXMMU) |
| #define LL_AHB3_GRP1_PERIPH_GFXMMU RCC_AHB3ENR_GFXMMUEN |
| #endif /* GFXMMU */ |
| #define LL_AHB3_GRP1_PERIPH_SDMMC1 RCC_AHB3ENR_SDMMC1EN |
| #define LL_AHB3_GRP1_PERIPH_FLASH RCC_AHB3LPENR_FLASHLPEN |
| #define LL_AHB3_GRP1_PERIPH_DTCM1 RCC_AHB3LPENR_DTCM1LPEN |
| #define LL_AHB3_GRP1_PERIPH_DTCM2 RCC_AHB3LPENR_DTCM2LPEN |
| #define LL_AHB3_GRP1_PERIPH_ITCM RCC_AHB3LPENR_ITCMLPEN |
| #if defined(RCC_AHB3LPENR_AXISRAMLPEN) |
| #define LL_AHB3_GRP1_PERIPH_AXISRAM RCC_AHB3LPENR_AXISRAMLPEN |
| #else |
| #define LL_AHB3_GRP1_PERIPH_AXISRAM1 RCC_AHB3LPENR_AXISRAM1LPEN |
| #define LL_AHB3_GRP1_PERIPH_AXISRAM LL_AHB3_GRP1_PERIPH_AXISRAM1 /* for backward compatibility*/ |
| #endif /* RCC_AHB3LPENR_AXISRAMLPEN */ |
| #if defined(CD_AXISRAM2_BASE) |
| #define LL_AHB3_GRP1_PERIPH_AXISRAM2 RCC_AHB3LPENR_AXISRAM2LPEN |
| #endif /* CD_AXISRAM2_BASE */ |
| #if defined(CD_AXISRAM3_BASE) |
| #define LL_AHB3_GRP1_PERIPH_AXISRAM3 RCC_AHB3LPENR_AXISRAM3LPEN |
| #endif /* CD_AXISRAM3_BASE */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN |
| #define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN |
| #define LL_AHB1_GRP1_PERIPH_ADC12 RCC_AHB1ENR_ADC12EN |
| #if defined(DUAL_CORE) |
| #define LL_AHB1_GRP1_PERIPH_ART RCC_AHB1ENR_ARTEN |
| #endif /* DUAL_CORE */ |
| #if defined(RCC_AHB1ENR_CRCEN) |
| #define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN |
| #endif /* RCC_AHB1ENR_CRCEN */ |
| #if defined(ETH) |
| #define LL_AHB1_GRP1_PERIPH_ETH1MAC RCC_AHB1ENR_ETH1MACEN |
| #define LL_AHB1_GRP1_PERIPH_ETH1TX RCC_AHB1ENR_ETH1TXEN |
| #define LL_AHB1_GRP1_PERIPH_ETH1RX RCC_AHB1ENR_ETH1RXEN |
| #endif /* ETH */ |
| #define LL_AHB1_GRP1_PERIPH_USB1OTGHS RCC_AHB1ENR_USB1OTGHSEN |
| #define LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI RCC_AHB1ENR_USB1OTGHSULPIEN |
| #if defined(USB2_OTG_FS) |
| #define LL_AHB1_GRP1_PERIPH_USB2OTGHS RCC_AHB1ENR_USB2OTGHSEN |
| #define LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI RCC_AHB1ENR_USB2OTGHSULPIEN |
| #endif /* USB2_OTG_FS */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN |
| #if defined(HSEM) && defined(RCC_AHB2ENR_HSEMEN) |
| #define LL_AHB2_GRP1_PERIPH_HSEM RCC_AHB2ENR_HSEMEN |
| #endif /* HSEM && RCC_AHB2ENR_HSEMEN */ |
| #if defined(CRYP) |
| #define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN |
| #endif /* CRYP */ |
| #if defined(HASH) |
| #define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN |
| #endif /* HASH */ |
| #define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN |
| #define LL_AHB2_GRP1_PERIPH_SDMMC2 RCC_AHB2ENR_SDMMC2EN |
| #if defined(BDMA1) |
| #define LL_AHB2_GRP1_PERIPH_BDMA1 RCC_AHB2ENR_BDMA1EN |
| #endif /* BDMA1 */ |
| #if defined(RCC_AHB2ENR_D2SRAM1EN) |
| #define LL_AHB2_GRP1_PERIPH_D2SRAM1 RCC_AHB2ENR_D2SRAM1EN |
| #else |
| #define LL_AHB2_GRP1_PERIPH_AHBSRAM1 RCC_AHB2ENR_AHBSRAM1EN |
| #define LL_AHB2_GRP1_PERIPH_D2SRAM1 LL_AHB2_GRP1_PERIPH_AHBSRAM1 /* for backward compatibility*/ |
| #endif /* RCC_AHB2ENR_D2SRAM1EN */ |
| #if defined(RCC_AHB2ENR_D2SRAM2EN) |
| #define LL_AHB2_GRP1_PERIPH_D2SRAM2 RCC_AHB2ENR_D2SRAM2EN |
| #else |
| #define LL_AHB2_GRP1_PERIPH_AHBSRAM2 RCC_AHB2ENR_AHBSRAM2EN |
| #define LL_AHB2_GRP1_PERIPH_D2SRAM2 LL_AHB2_GRP1_PERIPH_AHBSRAM2 /* for backward compatibility*/ |
| #endif /* RCC_AHB2ENR_D2SRAM2EN */ |
| #if defined(RCC_AHB2ENR_D2SRAM3EN) |
| #define LL_AHB2_GRP1_PERIPH_D2SRAM3 RCC_AHB2ENR_D2SRAM3EN |
| #endif /* RCC_AHB2ENR_D2SRAM3EN */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_AHB4_GRP1_PERIPH AHB4 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB4_GRP1_PERIPH_GPIOA RCC_AHB4ENR_GPIOAEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOB RCC_AHB4ENR_GPIOBEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOC RCC_AHB4ENR_GPIOCEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOD RCC_AHB4ENR_GPIODEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOE RCC_AHB4ENR_GPIOEEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOF RCC_AHB4ENR_GPIOFEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOG RCC_AHB4ENR_GPIOGEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOH RCC_AHB4ENR_GPIOHEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOI RCC_AHB4ENR_GPIOIEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOJ RCC_AHB4ENR_GPIOJEN |
| #define LL_AHB4_GRP1_PERIPH_GPIOK RCC_AHB4ENR_GPIOKEN |
| #if defined(RCC_AHB4ENR_CRCEN) |
| #define LL_AHB4_GRP1_PERIPH_CRC RCC_AHB4ENR_CRCEN |
| #endif /* RCC_AHB4ENR_CRCEN */ |
| #if defined(BDMA2) |
| #define LL_AHB4_GRP1_PERIPH_BDMA2 RCC_AHB4ENR_BDMA2EN |
| #define LL_AHB4_GRP1_PERIPH_BDMA LL_AHB4_GRP1_PERIPH_BDMA2 /* for backward compatibility*/ |
| #else |
| #define LL_AHB4_GRP1_PERIPH_BDMA RCC_AHB4ENR_BDMAEN |
| #endif /* BDMA2 */ |
| #if defined(ADC3) |
| #define LL_AHB4_GRP1_PERIPH_ADC3 RCC_AHB4ENR_ADC3EN |
| #endif /* ADC3 */ |
| #if defined(HSEM) && defined(RCC_AHB4ENR_HSEMEN) |
| #define LL_AHB4_GRP1_PERIPH_HSEM RCC_AHB4ENR_HSEMEN |
| #endif /* HSEM && RCC_AHB4ENR_HSEMEN*/ |
| #define LL_AHB4_GRP1_PERIPH_BKPRAM RCC_AHB4ENR_BKPRAMEN |
| #if defined(RCC_AHB4LPENR_SRAM4LPEN) |
| #define LL_AHB4_GRP1_PERIPH_SRAM4 RCC_AHB4LPENR_SRAM4LPEN |
| #define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRAM4 |
| #else |
| #define LL_AHB4_GRP1_PERIPH_SRDSRAM RCC_AHB4ENR_SRDSRAMEN |
| #define LL_AHB4_GRP1_PERIPH_SRAM4 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/ |
| #define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/ |
| #endif /* RCC_AHB4ENR_D3SRAM1EN */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB3_GRP1_PERIPH APB3 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB3_GRP1_PERIPH_LTDC RCC_APB3ENR_LTDCEN |
| #if defined(DSI) |
| #define LL_APB3_GRP1_PERIPH_DSI RCC_APB3ENR_DSIEN |
| #endif /* DSI */ |
| #define LL_APB3_GRP1_PERIPH_WWDG1 RCC_APB3ENR_WWDG1EN |
| #if defined(RCC_APB3ENR_WWDGEN) |
| #define LL_APB3_GRP1_PERIPH_WWDG LL_APB3_GRP1_PERIPH_WWDG1 /* for backward compatibility*/ |
| #endif |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1LENR_TIM2EN |
| #define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1LENR_TIM3EN |
| #define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1LENR_TIM4EN |
| #define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1LENR_TIM5EN |
| #define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1LENR_TIM6EN |
| #define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1LENR_TIM7EN |
| #define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1LENR_TIM12EN |
| #define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1LENR_TIM13EN |
| #define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1LENR_TIM14EN |
| #define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1LENR_LPTIM1EN |
| #if defined(DUAL_CORE) |
| #define LL_APB1_GRP1_PERIPH_WWDG2 RCC_APB1LENR_WWDG2EN |
| #endif /*DUAL_CORE*/ |
| #define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1LENR_SPI2EN |
| #define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1LENR_SPI3EN |
| #define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1LENR_SPDIFRXEN |
| #define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1LENR_USART2EN |
| #define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1LENR_USART3EN |
| #define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1LENR_UART4EN |
| #define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1LENR_UART5EN |
| #define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1LENR_I2C1EN |
| #define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1LENR_I2C2EN |
| #define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1LENR_I2C3EN |
| #define LL_APB1_GRP1_PERIPH_CEC RCC_APB1LENR_CECEN |
| #define LL_APB1_GRP1_PERIPH_DAC12 RCC_APB1LENR_DAC12EN |
| #define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1LENR_UART7EN |
| #define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1LENR_UART8EN |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH |
| * @{ |
| */ |
| #define LL_APB1_GRP2_PERIPH_CRS RCC_APB1HENR_CRSEN |
| #define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1HENR_SWPMIEN |
| #define LL_APB1_GRP2_PERIPH_OPAMP RCC_APB1HENR_OPAMPEN |
| #define LL_APB1_GRP2_PERIPH_MDIOS RCC_APB1HENR_MDIOSEN |
| #define LL_APB1_GRP2_PERIPH_FDCAN RCC_APB1HENR_FDCANEN |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN |
| #define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN |
| #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN |
| #define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN |
| #if defined(UART9) |
| #define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN |
| #endif /* UART9 */ |
| #if defined(USART10) |
| #define LL_APB2_GRP1_PERIPH_USART10 RCC_APB2ENR_USART10EN |
| #endif /* USART10 */ |
| #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN |
| #define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN |
| #define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN |
| #define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN |
| #define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN |
| #define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN |
| #define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN |
| #define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN |
| #if defined(SAI3) |
| #define LL_APB2_GRP1_PERIPH_SAI3 RCC_APB2ENR_SAI3EN |
| #endif /* SAI3 */ |
| #define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN |
| #if defined(HRTIM1) |
| #define LL_APB2_GRP1_PERIPH_HRTIM RCC_APB2ENR_HRTIMEN |
| #endif /* HRTIM1 */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB4_GRP1_PERIPH APB4 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB4_GRP1_PERIPH_SYSCFG RCC_APB4ENR_SYSCFGEN |
| #define LL_APB4_GRP1_PERIPH_LPUART1 RCC_APB4ENR_LPUART1EN |
| #define LL_APB4_GRP1_PERIPH_SPI6 RCC_APB4ENR_SPI6EN |
| #define LL_APB4_GRP1_PERIPH_I2C4 RCC_APB4ENR_I2C4EN |
| #define LL_APB4_GRP1_PERIPH_LPTIM2 RCC_APB4ENR_LPTIM2EN |
| #define LL_APB4_GRP1_PERIPH_LPTIM3 RCC_APB4ENR_LPTIM3EN |
| #if defined(LPTIM4) |
| #define LL_APB4_GRP1_PERIPH_LPTIM4 RCC_APB4ENR_LPTIM4EN |
| #endif /* LPTIM4 */ |
| #if defined(LPTIM5) |
| #define LL_APB4_GRP1_PERIPH_LPTIM5 RCC_APB4ENR_LPTIM5EN |
| #endif /* LPTIM5 */ |
| #if defined(DAC2) |
| #define LL_APB4_GRP1_PERIPH_DAC2 RCC_APB4ENR_DAC2EN |
| #endif /* DAC2 */ |
| #define LL_APB4_GRP1_PERIPH_COMP12 RCC_APB4ENR_COMP12EN |
| #define LL_APB4_GRP1_PERIPH_VREF RCC_APB4ENR_VREFEN |
| #define LL_APB4_GRP1_PERIPH_RTCAPB RCC_APB4ENR_RTCAPBEN |
| #if defined(SAI4) |
| #define LL_APB4_GRP1_PERIPH_SAI4 RCC_APB4ENR_SAI4EN |
| #endif /* SAI4 */ |
| #if defined(DTS) |
| #define LL_APB4_GRP1_PERIPH_DTS RCC_APB4ENR_DTSEN |
| #endif /*DTS*/ |
| #if defined(DFSDM2_BASE) |
| #define LL_APB4_GRP1_PERIPH_DFSDM2 RCC_APB4ENR_DFSDM2EN |
| #endif /* DFSDM2_BASE */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_CLKAM_PERIPH CLKAM PERIPH |
| * @{ |
| */ |
| #if defined(RCC_D3AMR_BDMAAMEN) |
| #define LL_CLKAM_PERIPH_BDMA RCC_D3AMR_BDMAAMEN |
| #else |
| #define LL_CLKAM_PERIPH_BDMA2 RCC_SRDAMR_BDMA2AMEN |
| #define LL_CLKAM_PERIPH_BDMA LL_CLKAM_PERIPH_BDMA2 /* for backward compatibility*/ |
| #endif /* RCC_D3AMR_BDMAAMEN */ |
| #if defined(RCC_SRDAMR_GPIOAMEN) |
| #define LL_CLKAM_PERIPH_GPIO RCC_SRDAMR_GPIOAMEN |
| #endif /* RCC_SRDAMR_GPIOAMEN */ |
| #if defined(RCC_D3AMR_LPUART1AMEN) |
| #define LL_CLKAM_PERIPH_LPUART1 RCC_D3AMR_LPUART1AMEN |
| #else |
| #define LL_CLKAM_PERIPH_LPUART1 RCC_SRDAMR_LPUART1AMEN |
| #endif /* RCC_D3AMR_LPUART1AMEN */ |
| #if defined(RCC_D3AMR_SPI6AMEN) |
| #define LL_CLKAM_PERIPH_SPI6 RCC_D3AMR_SPI6AMEN |
| #else |
| #define LL_CLKAM_PERIPH_SPI6 RCC_SRDAMR_SPI6AMEN |
| #endif /* RCC_D3AMR_SPI6AMEN */ |
| #if defined(RCC_D3AMR_I2C4AMEN) |
| #define LL_CLKAM_PERIPH_I2C4 RCC_D3AMR_I2C4AMEN |
| #else |
| #define LL_CLKAM_PERIPH_I2C4 RCC_SRDAMR_I2C4AMEN |
| #endif /* RCC_D3AMR_I2C4AMEN */ |
| #if defined(RCC_D3AMR_LPTIM2AMEN) |
| #define LL_CLKAM_PERIPH_LPTIM2 RCC_D3AMR_LPTIM2AMEN |
| #else |
| #define LL_CLKAM_PERIPH_LPTIM2 RCC_SRDAMR_LPTIM2AMEN |
| #endif /* RCC_D3AMR_LPTIM2AMEN */ |
| #if defined(RCC_D3AMR_LPTIM3AMEN) |
| #define LL_CLKAM_PERIPH_LPTIM3 RCC_D3AMR_LPTIM3AMEN |
| #else |
| #define LL_CLKAM_PERIPH_LPTIM3 RCC_SRDAMR_LPTIM3AMEN |
| #endif /* RCC_D3AMR_LPTIM3AMEN */ |
| #if defined(RCC_D3AMR_LPTIM4AMEN) |
| #define LL_CLKAM_PERIPH_LPTIM4 RCC_D3AMR_LPTIM4AMEN |
| #endif /* RCC_D3AMR_LPTIM4AMEN */ |
| #if defined(RCC_D3AMR_LPTIM5AMEN) |
| #define LL_CLKAM_PERIPH_LPTIM5 RCC_D3AMR_LPTIM5AMEN |
| #endif /* RCC_D3AMR_LPTIM5AMEN */ |
| #if defined(DAC2) |
| #define LL_CLKAM_PERIPH_DAC2 RCC_SRDAMR_DAC2AMEN |
| #endif /* DAC2 */ |
| #if defined(RCC_D3AMR_COMP12AMEN) |
| #define LL_CLKAM_PERIPH_COMP12 RCC_D3AMR_COMP12AMEN |
| #else |
| #define LL_CLKAM_PERIPH_COMP12 RCC_SRDAMR_COMP12AMEN |
| #endif /* RCC_D3AMR_COMP12AMEN */ |
| #if defined(RCC_D3AMR_VREFAMEN) |
| #define LL_CLKAM_PERIPH_VREF RCC_D3AMR_VREFAMEN |
| #else |
| #define LL_CLKAM_PERIPH_VREF RCC_SRDAMR_VREFAMEN |
| #endif /* RCC_D3AMR_VREFAMEN */ |
| #if defined(RCC_D3AMR_RTCAMEN) |
| #define LL_CLKAM_PERIPH_RTC RCC_D3AMR_RTCAMEN |
| #else |
| #define LL_CLKAM_PERIPH_RTC RCC_SRDAMR_RTCAMEN |
| #endif /* RCC_D3AMR_RTCAMEN */ |
| #if defined(RCC_D3AMR_CRCAMEN) |
| #define LL_CLKAM_PERIPH_CRC RCC_D3AMR_CRCAMEN |
| #endif /* RCC_D3AMR_CRCAMEN */ |
| #if defined(SAI4) |
| #define LL_CLKAM_PERIPH_SAI4 RCC_D3AMR_SAI4AMEN |
| #endif /* SAI4 */ |
| #if defined(ADC3) |
| #define LL_CLKAM_PERIPH_ADC3 RCC_D3AMR_ADC3AMEN |
| #endif /* ADC3 */ |
| #if defined(DTS) |
| #define LL_CLKAM_PERIPH_DTS RCC_SRDAMR_DTSAMEN |
| #endif /* DTS */ |
| #if defined(DFSDM2_BASE) |
| #define LL_CLKAM_PERIPH_DFSDM2 RCC_SRDAMR_DFSDM2AMEN |
| #endif /* DFSDM2_BASE */ |
| #if defined(RCC_D3AMR_BKPRAMAMEN) |
| #define LL_CLKAM_PERIPH_BKPRAM RCC_D3AMR_BKPRAMAMEN |
| #else |
| #define LL_CLKAM_PERIPH_BKPRAM RCC_SRDAMR_BKPRAMAMEN |
| #endif /* RCC_D3AMR_BKPRAMAMEN */ |
| #if defined(RCC_D3AMR_SRAM4AMEN) |
| #define LL_CLKAM_PERIPH_SRAM4 RCC_D3AMR_SRAM4AMEN |
| #else |
| #define LL_CLKAM_PERIPH_SRDSRAM RCC_SRDAMR_SRDSRAMAMEN |
| #define LL_CLKAM_PERIPH_SRAM4 LL_CLKAM_PERIPH_SRDSRAM |
| #endif /* RCC_D3AMR_SRAM4AMEN */ |
| /** |
| * @} |
| */ |
| |
| #if defined(RCC_CKGAENR_AXICKG) |
| /** @defgroup BUS_LL_EC_CKGA_PERIPH CKGA (AXI Clocks Gating) PERIPH |
| * @{ |
| */ |
| #define LL_CKGA_PERIPH_AXI RCC_CKGAENR_AXICKG |
| #define LL_CKGA_PERIPH_AHB RCC_CKGAENR_AHBCKG |
| #define LL_CKGA_PERIPH_CPU RCC_CKGAENR_CPUCKG |
| #define LL_CKGA_PERIPH_SDMMC RCC_CKGAENR_SDMMCCKG |
| #define LL_CKGA_PERIPH_MDMA RCC_CKGAENR_MDMACKG |
| #define LL_CKGA_PERIPH_DMA2D RCC_CKGAENR_DMA2DCKG |
| #define LL_CKGA_PERIPH_LTDC RCC_CKGAENR_LTDCCKG |
| #define LL_CKGA_PERIPH_GFXMMUM RCC_CKGAENR_GFXMMUMCKG |
| #define LL_CKGA_PERIPH_AHB12 RCC_CKGAENR_AHB12CKG |
| #define LL_CKGA_PERIPH_AHB34 RCC_CKGAENR_AHB34CKG |
| #define LL_CKGA_PERIPH_FLIFT RCC_CKGAENR_FLIFTCKG |
| #define LL_CKGA_PERIPH_OCTOSPI2 RCC_CKGAENR_OCTOSPI2CKG |
| #define LL_CKGA_PERIPH_FMC RCC_CKGAENR_FMCCKG |
| #define LL_CKGA_PERIPH_OCTOSPI1 RCC_CKGAENR_OCTOSPI1CKG |
| #define LL_CKGA_PERIPH_AXIRAM1 RCC_CKGAENR_AXIRAM1CKG |
| #define LL_CKGA_PERIPH_AXIRAM2 RCC_CKGAENR_AXIRAM2CKG |
| #define LL_CKGA_PERIPH_AXIRAM3 RCC_CKGAENR_AXIRAM3CKG |
| #define LL_CKGA_PERIPH_GFXMMUS RCC_CKGAENR_GFXMMUSCKG |
| #define LL_CKGA_PERIPH_ECCRAM RCC_CKGAENR_ECCRAMCKG |
| #define LL_CKGA_PERIPH_EXTI RCC_CKGAENR_EXTICKG |
| #define LL_CKGA_PERIPH_JTAG RCC_CKGAENR_JTAGCKG |
| /** |
| * @} |
| */ |
| #endif /* RCC_CKGAENR_AXICKG */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| |
| /** @defgroup BUS_LL_Exported_Functions BUS Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB3 AHB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB3 peripherals clock. |
| * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_EnableClock\n |
| * AHB3ENR DMA2DEN LL_AHB3_GRP1_EnableClock\n |
| * AHB3ENR JPGDECEN LL_AHB3_GRP1_EnableClock\n |
| * AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n |
| * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OSPI2EN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR IOMNGREN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR GFXMMU LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR SDMMC1EN LL_AHB3_GRP1_EnableClock\n |
| * AHB3ENR FLASHEN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR DTCM1EN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR DTCM2EN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR ITCMEN LL_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR AXISRAMEN LL_AHB3_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB3 peripheral clock is enabled or not |
| * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR DMA2DEN LL_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR JPGDECEN LL_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OSPI2EN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR IOMNGREN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR GFXMMU LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR SDMMC1EN LL_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR FLASHEN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR DTCM1EN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR DTCM2EN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR ITCMEN LL_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR AXISRAMEN LL_AHB3_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable AHB3 peripherals clock. |
| * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_DisableClock\n |
| * AHB3ENR DMA2DEN LL_AHB3_GRP1_DisableClock\n |
| * AHB3ENR JPGDECEN LL_AHB3_GRP1_DisableClock\n |
| * AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n |
| * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OSPI2EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR IOMNGREN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR GFXMMU LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR SDMMC1EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR FLASHEN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR DTCM1EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR DTCM2EN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR ITCMEN LL_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR AXISRAMEN LL_AHB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB3 peripherals reset. |
| * @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ForceReset\n |
| * AHB3RSTR DMA2DRST LL_AHB3_GRP1_ForceReset\n |
| * AHB3RSTR JPGDECRST LL_AHB3_GRP1_ForceReset\n |
| * AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n |
| * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR GFXMMURST LL_AHB3_GRP1_ForceReset\n (*) |
| * AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB3RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB3 peripherals reset. |
| * @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ReleaseReset\n |
| * AHB3RSTR DMA2DRST LL_AHB3_GRP1_ReleaseReset\n |
| * AHB3RSTR JPGDECRST LL_AHB3_GRP1_ReleaseReset\n |
| * AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n |
| * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset\n |
| * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset\n (*) |
| * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ReleaseReset\n (*) |
| * AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ReleaseReset\n (*) |
| * AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ReleaseReset\n (*) |
| * AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ReleaseReset\n (*) |
| * AHB3RSTR GFXMMURST LL_AHB3_GRP1_ReleaseReset\n (*) |
| * AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB3RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR FLASHLPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR ITCMLPEN LL_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB3LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR FLASHLPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR ITCMLPEN LL_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB3LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB1 AHB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ADC12EN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ARTEN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ETH1MACEN LL_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR ETH1TXEN LL_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR ETH1RXEN LL_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB1ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB1 peripheral clock is enabled or not |
| * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ADC12EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ARTEN LL_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ETH1MACEN LL_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ETH1TXEN LL_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ETH1RXEN LL_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ADC12EN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ARTEN LL_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ETH1MACEN LL_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ETH1TXEN LL_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ETH1RXEN LL_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB1ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB1 peripherals reset. |
| * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR ADC12RST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR ARTRST LL_AHB1_GRP1_ForceReset\n (*) |
| * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n (*) |
| * AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ForceReset\n (*) |
| * AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ForceReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB1 peripherals reset. |
| * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR ADC12RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR ARTRST LL_AHB1_GRP1_ReleaseReset\n (*) |
| * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n (*) |
| * AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ReleaseReset\n (*) |
| * AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ReleaseReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ARTLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB1LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ARTLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB1LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB2 AHB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB2 peripherals clock. |
| * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR HSEMEN LL_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR SDMMC2EN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR BDMA1EN LL_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB2 peripheral clock is enabled or not |
| * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR HSEMEN LL_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR SDMMC2EN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR BDMA1EN LL_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEMEN (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable AHB2 peripherals clock. |
| * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR HSEMEN LL_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR SDMMC2EN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR BDMA1EN LL_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEMEN (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB2 peripherals reset. |
| * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR HSEMRST LL_AHB2_GRP1_ForceReset\n (*) |
| * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n (*) |
| * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n (*) |
| * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR BDMA1RST LL_AHB2_GRP1_ForceReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB2 peripherals reset. |
| * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR HSEMRST LL_AHB2_GRP1_ReleaseReset\n (*) |
| * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n (*) |
| * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n (*) |
| * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR BDMA1RST LL_AHB2_GRP1_ReleaseReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockSleep\n (*) |
| * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockSleep\n (*) |
| * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_EnableClockSleep\n (*) |
| * AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockSleep\n (*) |
| * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockSleep\n (*) |
| * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_DisableClockSleep\n (*) |
| * AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB4 AHB4 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB4 peripherals clock. |
| * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOBEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOCEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIODEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOEEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOFEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOGEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOHEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOIEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOJEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOKEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR CRCEN LL_AHB4_GRP1_EnableClock\n (*) |
| * AHB4ENR BDMAEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR ADC3EN LL_AHB4_GRP1_EnableClock\n (*) |
| * AHB4ENR HSEMEN LL_AHB4_GRP1_EnableClock\n (*) |
| * AHB4ENR BKPRAMEN LL_AHB4_GRP1_EnableClock\n |
| * AHB4ENR SRAM4EN LL_AHB4_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB4_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB4ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB4ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB4 peripheral clock is enabled or not |
| * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOBEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOCEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIODEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOEEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOFEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOGEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOHEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOIEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOJEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOKEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR CRCEN LL_AHB4_GRP1_IsEnabledClock\n (*) |
| * AHB4ENR BDMAEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR ADC3EN LL_AHB4_GRP1_IsEnabledClock\n (*) |
| * AHB4ENR HSEMEN LL_AHB4_GRP1_IsEnabledClock\n (*) |
| * AHB4ENR BKPRAMEN LL_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR SRAM4EN LL_AHB4_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB4ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable AHB4 peripherals clock. |
| * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOBEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOCEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIODEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOEEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOFEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOGEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOHEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOIEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOJEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOKEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR CRCEN LL_AHB4_GRP1_DisableClock\n (*) |
| * AHB4ENR BDMAEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR ADC3EN LL_AHB4_GRP1_DisableClock\n (*) |
| * AHB4ENR HSEMEN LL_AHB4_GRP1_DisableClock\n (*) |
| * AHB4ENR BKPRAMEN LL_AHB4_GRP1_DisableClock\n |
| * AHB4ENR SRAM4EN LL_AHB4_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB4_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB4ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB4 peripherals reset. |
| * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIODRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOERST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOIRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOJRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR GPIOKRST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR CRCRST LL_AHB4_GRP1_ForceReset\n (*) |
| * AHB4RSTR BDMARST LL_AHB4_GRP1_ForceReset\n |
| * AHB4RSTR ADC3RST LL_AHB4_GRP1_ForceReset\n (*) |
| * AHB4RSTR HSEMRST LL_AHB4_GRP1_ForceReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB4_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB4RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB4 peripherals reset. |
| * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIODRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOERST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOIRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOJRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR GPIOKRST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR CRCRST LL_AHB4_GRP1_ReleaseReset\n (*) |
| * AHB4RSTR BDMARST LL_AHB4_GRP1_ReleaseReset\n |
| * AHB4RSTR ADC3RST LL_AHB4_GRP1_ReleaseReset\n (*) |
| * AHB4RSTR HSEMRST LL_AHB4_GRP1_ReleaseReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB4_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB4RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOILPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR CRCLPEN LL_AHB4_GRP1_EnableClockSleep\n (*) |
| * AHB4LPENR BDMALPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR ADC3LPEN LL_AHB4_GRP1_EnableClockSleep\n (*) |
| * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB4LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB4LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOILPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR CRCLPEN LL_AHB4_GRP1_DisableClockSleep\n (*) |
| * AHB4LPENR BDMALPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR ADC3LPEN LL_AHB4_GRP1_DisableClockSleep\n (*) |
| * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB4LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB3 APB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB3 peripherals clock. |
| * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_EnableClock\n (*) |
| * APB3ENR DSIEN LL_APB3_GRP1_EnableClock\n (*) |
| * APB3ENR WWDG1EN LL_APB3_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB3 peripheral clock is enabled or not |
| * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_IsEnabledClock\n (*) |
| * APB3ENR DSIEN LL_APB3_GRP1_IsEnabledClock\n (*) |
| * APB3ENR WWDG1EN LL_APB3_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_APB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB3ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable APB3 peripherals clock. |
| * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_DisableClock\n |
| * APB3ENR DSIEN LL_APB3_GRP1_DisableClock\n |
| * APB3ENR WWDG1EN LL_APB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB3 peripherals reset. |
| * @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ForceReset\n (*) |
| * APB3RSTR DSIRST LL_APB3_GRP1_ForceReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB3_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB3RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB3 peripherals reset. |
| * @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ReleaseReset\n |
| * APB3RSTR DSIRST LL_APB3_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB3_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB3RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_EnableClockSleep\n (*) |
| * APB3LPENR DSILPEN LL_APB3_GRP1_EnableClockSleep\n (*) |
| * APB3LPENR WWDG1LPEN LL_APB3_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB3_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB3LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB3LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_DisableClockSleep\n (*) |
| * APB3LPENR DSILPEN LL_APB3_GRP1_DisableClockSleep\n (*) |
| * APB3LPENR WWDG1LPEN LL_APB3_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB3_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB3LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB1 APB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB1 peripherals clock. |
| * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM3EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM4EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM5EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM6EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM7EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM12EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM13EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM14EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR LPTIM1EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR WWDG2EN LL_APB1_GRP1_EnableClock\n (*) |
| * APB1LENR SPI2EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR SPI3EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR USART2EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR USART3EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR UART4EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR UART5EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C1EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C2EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C3EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR CECEN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR DAC12EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR UART7EN LL_APB1_GRP1_EnableClock\n |
| * APB1LENR UART8EN LL_APB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1LENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1LENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB1 peripheral clock is enabled or not |
| * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR WWDG2EN LL_APB1_GRP1_IsEnabledClock\n (*) |
| * APB1LENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR USART2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR USART3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR CECEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR DAC12EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART7EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART8EN LL_APB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB1LENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock. |
| * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM3EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM4EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM5EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM6EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM7EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM12EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM13EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM14EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR LPTIM1EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR WWDG2EN LL_APB1_GRP1_DisableClock\n (*) |
| * APB1LENR SPI2EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR SPI3EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR USART2EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR USART3EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR UART4EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR UART5EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C1EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C2EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C3EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR CECEN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR DAC12EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR UART7EN LL_APB1_GRP1_DisableClock\n |
| * APB1LENR UART8EN LL_APB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1LENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB1 peripherals reset. |
| * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM3RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM4RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM5RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM6RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM7RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM12RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM13RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR TIM14RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR SPI2RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR SPI3RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR USART2RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR USART3RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR UART4RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR UART5RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR I2C1RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR I2C2RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR I2C3RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR CECRST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR DAC12RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR UART7RST LL_APB1_GRP1_ForceReset\n |
| * APB1LRSTR UART8RST LL_APB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB1LRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB1 peripherals reset. |
| * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR USART2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR USART3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR UART4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR UART5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR CECRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR DAC12RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR UART7RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1LRSTR UART8RST LL_APB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1LRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM12LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM13LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM14LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR WWDG2LPEN LL_APB1_GRP1_EnableClockSleep\n (*) |
| * APB1LLPENR SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR USART2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR USART3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART4LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART5LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR CECLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR DAC12LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART7LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART8LPEN LL_APB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1LLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1LLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM12LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM13LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM14LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR WWDG2LPEN LL_APB1_GRP1_DisableClockSleep\n (*) |
| * APB1LLPENR SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR USART2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR USART3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART4LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART5LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR CECLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR DAC12LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART7LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART8LPEN LL_APB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1LLPENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB1 peripherals clock. |
| * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_EnableClock\n |
| * APB1HENR SWPMIEN LL_APB1_GRP2_EnableClock\n |
| * APB1HENR OPAMPEN LL_APB1_GRP2_EnableClock\n |
| * APB1HENR MDIOSEN LL_APB1_GRP2_EnableClock\n |
| * APB1HENR FDCANEN LL_APB1_GRP2_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1HENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1HENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB1 peripheral clock is enabled or not |
| * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR SWPMIEN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR OPAMPEN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR MDIOSEN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR FDCANEN LL_APB1_GRP2_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB1HENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock. |
| * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_DisableClock\n |
| * APB1HENR SWPMIEN LL_APB1_GRP2_DisableClock\n |
| * APB1HENR OPAMPEN LL_APB1_GRP2_DisableClock\n |
| * APB1HENR MDIOSEN LL_APB1_GRP2_DisableClock\n |
| * APB1HENR FDCANEN LL_APB1_GRP2_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1HENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB1 peripherals reset. |
| * @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ForceReset\n |
| * APB1HRSTR SWPMIRST LL_APB1_GRP2_ForceReset\n |
| * APB1HRSTR OPAMPRST LL_APB1_GRP2_ForceReset\n |
| * APB1HRSTR MDIOSRST LL_APB1_GRP2_ForceReset\n |
| * APB1HRSTR FDCANRST LL_APB1_GRP2_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB1HRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB1 peripherals reset. |
| * @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ReleaseReset\n |
| * APB1HRSTR SWPMIRST LL_APB1_GRP2_ReleaseReset\n |
| * APB1HRSTR OPAMPRST LL_APB1_GRP2_ReleaseReset\n |
| * APB1HRSTR MDIOSRST LL_APB1_GRP2_ReleaseReset\n |
| * APB1HRSTR FDCANRST LL_APB1_GRP2_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1HRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR SWPMILPEN LL_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR OPAMPLPEN LL_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR MDIOSLPEN LL_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR FDCANLPEN LL_APB1_GRP2_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1HLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1HLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR SWPMILPEN LL_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR OPAMPLPEN LL_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR MDIOSLPEN LL_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR FDCANLPEN LL_APB1_GRP2_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1HLPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB2 APB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB2 peripherals clock. |
| * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n (*) |
| * APB2ENR USART10EN LL_APB2_GRP1_EnableClock\n (*) |
| * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI3EN LL_APB2_GRP1_EnableClock\n (*) |
| * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR HRTIMEN LL_APB2_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB2 peripheral clock is enabled or not |
| * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n (*) |
| * APB2ENR USART10EN LL_APB2_GRP1_IsEnabledClock\n (*) |
| * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI3EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR HRTIMEN LL_APB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock. |
| * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n (*) |
| * APB2ENR USART10EN LL_APB2_GRP1_DisableClock\n (*) |
| * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI3EN LL_APB2_GRP1_DisableClock\n (*) |
| * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR HRTIMEN LL_APB2_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB2 peripherals reset. |
| * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n |
| * APB2ENR UART9RST LL_APB2_GRP1_ForceReset\n (*) |
| * APB2ENR USART10RST LL_APB2_GRP1_ForceReset\n (*) |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SAI3RST LL_APB2_GRP1_ForceReset\n (*) |
| * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR HRTIMRST LL_APB2_GRP1_ForceReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB2 peripherals reset. |
| * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2ENR UART9RST LL_APB2_GRP1_ReleaseReset\n (*) |
| * APB2ENR USART10RST LL_APB2_GRP1_ReleaseReset\n (*) |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SAI3RST LL_APB2_GRP1_ReleaseReset\n (*) |
| * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR HRTIMRST LL_APB2_GRP1_ReleaseReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2ENR UART9LPEN LL_APB2_GRP1_EnableClockSleep\n (*) |
| * APB2ENR USART10LPEN LL_APB2_GRP1_EnableClockSleep\n (*) |
| * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM15LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM16LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM17LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI3LPEN LL_APB2_GRP1_EnableClockSleep\n (*) |
| * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR HRTIMLPEN LL_APB2_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2ENR UART9LPEN LL_APB2_GRP1_DisableClockSleep\n (*) |
| * APB2ENR USART10LPEN LL_APB2_GRP1_DisableClockSleep\n (*) |
| * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM15LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM16LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM17LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI3LPEN LL_APB2_GRP1_DisableClockSleep\n (*) |
| * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR HRTIMLPEN LL_APB2_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB4 APB4 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB4 peripherals clock. |
| * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR LPUART1EN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR SPI6EN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR I2C4EN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM2EN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM3EN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM4EN LL_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR LPTIM5EN LL_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR DAC2EN LL_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR COMP12EN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR VREFEN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR RTCAPBEN LL_APB4_GRP1_EnableClock\n |
| * APB4ENR SAI4EN LL_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR DTSEN LL_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR DFSDM2EN LL_APB4_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB4_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB4ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB4ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB4 peripheral clock is enabled or not |
| * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPUART1EN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR SPI6EN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR I2C4EN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM2EN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM3EN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM4EN LL_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR LPTIM5EN LL_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR DAC2EN LL_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR COMP12EN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR VREFEN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR RTCAPBEN LL_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR SAI4EN LL_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR DTSEN LL_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR DFSDM2EN LL_APB4_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_APB4_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB4ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable APB4 peripherals clock. |
| * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR LPUART1EN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR SPI6EN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR I2C4EN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM2EN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM3EN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM4EN LL_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR LPTIM5EN LL_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR DAC2EN LL_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR COMP12EN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR VREFEN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR RTCAPBEN LL_APB4_GRP1_DisableClock\n |
| * APB4ENR SAI4EN LL_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR DTSEN LL_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR DFSDM2EN LL_APB4_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB4_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB4ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB4 peripherals reset. |
| * @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR LPUART1RST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR SPI6RST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR I2C4RST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR LPTIM2RST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR LPTIM3RST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR LPTIM4RST LL_APB4_GRP1_ForceReset\n (*) |
| * APB4RSTR LPTIM5RST LL_APB4_GRP1_ForceReset\n (*) |
| * APB4RSTR DAC2EN LL_APB4_GRP1_ForceReset\n (*) |
| * APB4RSTR COMP12RST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR VREFRST LL_APB4_GRP1_ForceReset\n |
| * APB4RSTR SAI4RST LL_APB4_GRP1_ForceReset\n (*) |
| * APB4RSTR DTSRST LL_APB4_GRP1_ForceReset\n (*) |
| * APB4RSTR DFSDM2RST LL_APB4_GRP1_ForceReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB4_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB4RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB4 peripherals reset. |
| * @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR LPUART1RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR SPI6RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR I2C4RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR LPTIM2RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR LPTIM3RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR LPTIM4RST LL_APB4_GRP1_ReleaseReset\n (*) |
| * APB4RSTR LPTIM5RST LL_APB4_GRP1_ReleaseReset\n (*) |
| * APB4RSTR DAC2RST LL_APB4_GRP1_ReleaseReset\n (*) |
| * APB4RSTR COMP12RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR VREFRST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR SAI4RST LL_APB4_GRP1_ReleaseReset\n |
| * APB4RSTR DTSRST LL_APB4_GRP1_ReleaseReset\n (*) |
| * APB4RSTR DFSDM2RST LL_APB4_GRP1_ReleaseReset (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB4_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB4RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPUART1LPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR SPI6LPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR I2C4LPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR DAC2LPEN LL_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR COMP12LPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR VREFLPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR SAI4LPEN LL_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR DTSLPEN LL_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR DFSDM2LPEN LL_APB4_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB4_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB4LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB4LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPUART1LPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR SPI6LPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR I2C4LPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4LPENR DAC2LPEN LL_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4LPENR COMP12LPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR VREFLPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR SAI4LPEN LL_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4LPENR DTSLPEN LL_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4LPENR DFSDM2LPEN LL_APB4_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB4_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB4LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_CLKAM |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable peripherals clock for CLKAM Mode. |
| * @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR LPUART1 LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR SPI6 LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR I2C4 LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR LPTIM2 LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR LPTIM3 LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR LPTIM4 LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR LPTIM5 LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR DAC2 LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR COMP12 LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR VREF LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR RTC LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR CRC LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR SAI4 LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR ADC3 LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR DTS LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR DFSDM2 LL_CLKAM_Enable\n (*) |
| * D3AMR / SRDAMR BKPRAM LL_CLKAM_Enable\n |
| * D3AMR / SRDAMR SRAM4 LL_CLKAM_Enable |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_CLKAM_PERIPH_BDMA |
| * @arg @ref LL_CLKAM_PERIPH_LPUART1 |
| * @arg @ref LL_CLKAM_PERIPH_SPI6 |
| * @arg @ref LL_CLKAM_PERIPH_I2C4 |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM2 |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM3 |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_CLKAM_PERIPH_DAC2 (*) |
| * @arg @ref LL_CLKAM_PERIPH_COMP12 |
| * @arg @ref LL_CLKAM_PERIPH_VREF |
| * @arg @ref LL_CLKAM_PERIPH_RTC |
| * @arg @ref LL_CLKAM_PERIPH_CRC |
| * @arg @ref LL_CLKAM_PERIPH_SAI4 (*) |
| * @arg @ref LL_CLKAM_PERIPH_ADC3 (*) |
| * @arg @ref LL_CLKAM_PERIPH_DTS (*) |
| * @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*) |
| * @arg @ref LL_CLKAM_PERIPH_BKPRAM |
| * @arg @ref LL_CLKAM_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CLKAM_Enable(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| |
| #if defined(RCC_D3AMR_BDMAAMEN) |
| SET_BIT(RCC->D3AMR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->D3AMR, Periphs); |
| #else |
| SET_BIT(RCC->SRDAMR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->SRDAMR, Periphs); |
| #endif /* RCC_D3AMR_BDMAAMEN */ |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable peripherals clock for CLKAM Mode. |
| * @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR LPUART1 LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR SPI6 LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR I2C4 LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR LPTIM2 LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR LPTIM3 LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR LPTIM4 LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR LPTIM5 LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR DAC2 LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR COMP12 LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR VREF LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR RTC LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR CRC LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR SAI4 LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR ADC3 LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR DTS LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR DFSDM2 LL_CLKAM_Disable\n (*) |
| * D3AMR / SRDAMR BKPRAM LL_CLKAM_Disable\n |
| * D3AMR / SRDAMR SRAM4 LL_CLKAM_Disable |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_CLKAM_PERIPH_BDMA |
| * @arg @ref LL_CLKAM_PERIPH_LPUART1 |
| * @arg @ref LL_CLKAM_PERIPH_SPI6 |
| * @arg @ref LL_CLKAM_PERIPH_I2C4 |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM2 |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM3 |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_CLKAM_PERIPH_DAC2 (*) |
| * @arg @ref LL_CLKAM_PERIPH_COMP12 |
| * @arg @ref LL_CLKAM_PERIPH_VREF |
| * @arg @ref LL_CLKAM_PERIPH_RTC |
| * @arg @ref LL_CLKAM_PERIPH_CRC |
| * @arg @ref LL_CLKAM_PERIPH_SAI4 (*) |
| * @arg @ref LL_CLKAM_PERIPH_ADC3 (*) |
| * @arg @ref LL_CLKAM_PERIPH_DTS (*) |
| * @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*) |
| * @arg @ref LL_CLKAM_PERIPH_BKPRAM |
| * @arg @ref LL_CLKAM_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CLKAM_Disable(uint32_t Periphs) |
| { |
| #if defined(RCC_D3AMR_BDMAAMEN) |
| CLEAR_BIT(RCC->D3AMR, Periphs); |
| #else |
| CLEAR_BIT(RCC->SRDAMR, Periphs); |
| #endif /* RCC_D3AMR_BDMAAMEN */ |
| } |
| |
| #if defined(RCC_CKGAENR_AXICKG) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @brief Enable clock gating for AXI bus peripherals. |
| * @rmtoll |
| * @param : |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CKGA_Enable(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->CKGAENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->CKGAENR, Periphs); |
| (void)tmpreg; |
| } |
| /** |
| * @} |
| */ |
| #endif /* RCC_CKGAENR_AXICKG */ |
| |
| #if defined(RCC_CKGAENR_AXICKG) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @brief Disable clock gating for AXI bus peripherals. |
| * @rmtoll |
| * @param : |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CKGA_Disable(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->CKGAENR, Periphs); |
| } |
| /** |
| * @} |
| */ |
| #endif /* RCC_CKGAENR_AXICKG */ |
| |
| |
| #if defined(DUAL_CORE) |
| /** @defgroup BUS_LL_EF_AHB3 AHB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 AHB3 peripherals clock. |
| * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_EnableClock\n |
| * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_EnableClock\n |
| * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_EnableClock\n |
| * AHB3ENR FMCEN LL_C1_AHB3_GRP1_EnableClock\n |
| * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR GFXMMU LL_C1_AHB3_GRP1_EnableClock\n (*) |
| * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 AHB3 peripheral clock is enabled or not |
| * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR FMCEN LL_C1_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR GFXMMU LL_C1_AHB3_GRP1_IsEnabledClock\n (*) |
| * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->AHB3ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 AHB3 peripherals clock. |
| * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_DisableClock\n |
| * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_DisableClock\n |
| * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_DisableClock\n |
| * AHB3ENR FMCEN LL_C1_AHB3_GRP1_DisableClock\n |
| * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR GFXMMU LL_C1_AHB3_GRP1_DisableClock\n (*) |
| * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 AHB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) |
| * AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB3LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB3LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 AHB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) |
| * AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB3LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB1 AHB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_EnableClock\n |
| * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_EnableClock\n |
| * AHB1ENR CRCEN LL_C1_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR ARTEN LL_C1_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n (*) |
| * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB1ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB1ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 AHB1 peripheral clock is enabled or not |
| * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR CRCEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ARTEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) |
| * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->AHB1ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_DisableClock\n |
| * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_DisableClock\n |
| * AHB1ENR CRCEN LL_C1_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ARTEN LL_C1_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n (*) |
| * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB1ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) |
| * AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB1LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB1LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) |
| * AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB1LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB2 AHB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 AHB2 peripherals clock. |
| * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_EnableClock\n |
| * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR HASHEN LL_C1_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR RNGEN LL_C1_AHB2_GRP1_EnableClock\n |
| * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_EnableClock\n |
| * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_EnableClock\n (*) |
| * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_EnableClock\n |
| * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_EnableClock\n |
| * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 AHB2 peripheral clock is enabled or not |
| * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR HASHEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR RNGEN LL_C1_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) |
| * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->AHB2ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 AHB2 peripherals clock. |
| * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_DisableClock\n |
| * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR HASHEN LL_C1_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR RNGEN LL_C1_AHB2_GRP1_DisableClock\n |
| * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_DisableClock\n |
| * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_DisableClock\n (*) |
| * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_DisableClock\n |
| * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_DisableClock\n |
| * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 AHB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) |
| * AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) |
| * AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) |
| * AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDAM1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 AHB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) |
| * AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) |
| * AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) |
| * AHB2LPENR D2SRAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_BDAM1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB4 AHB4 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 AHB4 peripherals clock. |
| * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR CRCEN LL_C1_AHB4_GRP1_EnableClock\n (*) |
| * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_EnableClock\n (*) |
| * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_EnableClock\n (*) |
| * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_EnableClock\n |
| * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB4ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB4ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 AHB4 peripheral clock is enabled or not |
| * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR CRCEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) |
| * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) |
| * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) |
| * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->AHB4ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 AHB4 peripherals clock. |
| * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR CRCEN LL_C1_AHB4_GRP1_DisableClock\n (*) |
| * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_DisableClock\n (*) |
| * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_DisableClock\n (*) |
| * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_DisableClock\n |
| * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB4ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 AHB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*) |
| * AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*) |
| * AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->AHB4LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->AHB4LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 AHB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*) |
| * AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*) |
| * AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->AHB4LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB3 APB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 APB3 peripherals clock. |
| * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_EnableClock\n (*) |
| * APB3ENR DSIEN LL_C1_APB3_GRP1_EnableClock\n (*) |
| * APB3ENR WWDG1EN LL_C1_APB3_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 APB3 peripheral clock is enabled or not |
| * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_IsEnabledClock\n (*) |
| * APB3ENR DSIEN LL_C1_APB3_GRP1_IsEnabledClock\n (*) |
| * APB3ENR WWDG1EN LL_C1_APB3_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_APB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->APB3ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 APB3 peripherals clock. |
| * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_DisableClock\n (*) |
| * APB3ENR DSIEN LL_C1_APB3_GRP1_DisableClock\n (*) |
| * APB3ENR WWDG1EN LL_C1_APB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 APB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*) |
| * APB3LPENR DSILPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*) |
| * APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB3_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB3LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB3LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 APB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*) |
| * APB3LPENR DSILPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*) |
| * APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB3_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB3LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB1 APB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 APB1 peripherals clock. |
| * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM3EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM4EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM5EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM6EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM7EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM12EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM13EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM14EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR WWDG2EN LL_C1_APB1_GRP1_EnableClock\n (*) |
| * APB1LENR SPI2EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR SPI3EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR USART2EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR USART3EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR UART4EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR UART5EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C1EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C2EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C3EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR CECEN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR DAC12EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR UART7EN LL_C1_APB1_GRP1_EnableClock\n |
| * APB1LENR UART8EN LL_C1_APB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB1LENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB1LENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 APB1 peripheral clock is enabled or not |
| * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM3EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM4EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM5EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM6EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM7EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM12EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM13EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM14EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR WWDG2EN LL_C1_APB1_GRP1_IsEnabledClock\n (*) |
| * APB1LENR SPI2EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPI3EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR USART2EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR USART3EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART4EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART5EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C1EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C2EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C3EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR CECEN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR DAC12EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART7EN LL_C1_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART8EN LL_C1_APB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_APB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->APB1LENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 APB1 peripherals clock. |
| * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM3EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM4EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM5EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM6EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM7EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM12EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM13EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM14EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR WWDG2EN LL_C1_APB1_GRP1_DisableClock\n (*) |
| * APB1LENR SPI2EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR SPI3EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR USART2EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR USART3EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR UART4EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR UART5EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C1EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C2EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C3EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR CECEN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR DAC12EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR UART7EN LL_C1_APB1_GRP1_DisableClock\n |
| * APB1LENR UART8EN LL_C1_APB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB1LENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n (*) |
| * APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR CECLPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB1LLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB1LLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n (*) |
| * APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR CECLPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB1LLPENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 APB1 peripherals clock. |
| * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_EnableClock\n |
| * APB1HENR SWPMIEN LL_C1_APB1_GRP2_EnableClock\n |
| * APB1HENR OPAMPEN LL_C1_APB1_GRP2_EnableClock\n |
| * APB1HENR MDIOSEN LL_C1_APB1_GRP2_EnableClock\n |
| * APB1HENR FDCANEN LL_C1_APB1_GRP2_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP2_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB1HENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB1HENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 APB1 peripheral clock is enabled or not |
| * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR SWPMIEN LL_C1_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR OPAMPEN LL_C1_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR MDIOSEN LL_C1_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR FDCANEN LL_C1_APB1_GRP2_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_APB1_GRP2_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->APB1HENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 APB1 peripherals clock. |
| * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_DisableClock\n |
| * APB1HENR SWPMIEN LL_C1_APB1_GRP2_DisableClock\n |
| * APB1HENR OPAMPEN LL_C1_APB1_GRP2_DisableClock\n |
| * APB1HENR MDIOSEN LL_C1_APB1_GRP2_DisableClock\n |
| * APB1HENR FDCANEN LL_C1_APB1_GRP2_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP2_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB1HENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP2_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB1HLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB1HLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB1_GRP2_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB1HLPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB2 APB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 APB2 peripherals clock. |
| * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM8EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR USART1EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR USART6EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClock\n (*) |
| * APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClock\n (*) |
| * APB2ENR SPI1EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI4EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM15EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM16EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM17EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI5EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI1EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI2EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI3EN LL_C1_APB2_GRP1_EnableClock\n (*) |
| * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_EnableClock\n |
| * APB2ENR HRTIMEN LL_C1_APB2_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 APB2 peripheral clock is enabled or not |
| * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM8EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART1EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART6EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR UART9EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) |
| * APB2ENR USART10EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) |
| * APB2ENR SPI1EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI4EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM15EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM16EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM17EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI5EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI1EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI2EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI3EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) |
| * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR HRTIMEN LL_C1_APB2_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_C1_APB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->APB2ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 APB2 peripherals clock. |
| * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM8EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR USART1EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR USART6EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR UART9EN LL_C1_APB2_GRP1_DisableClock\n (*) |
| * APB2ENR USART10EN LL_C1_APB2_GRP1_DisableClock\n (*) |
| * APB2ENR SPI1EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI4EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM15EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM16EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM17EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI5EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI1EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI2EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI3EN LL_C1_APB2_GRP1_DisableClock\n (*) |
| * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_DisableClock\n |
| * APB2ENR HRTIMEN LL_C1_APB2_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART6LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClockSleep\n (*) |
| * APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClockSleep\n (*) |
| * APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_EnableClockSleep\n (*) |
| * APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR USART1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR UART9LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) |
| * APB2LPENR USART10LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) |
| * APB2LPENR USART6LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) |
| * APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB4 APB4 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C1 APB4 peripherals clock. |
| * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR LPUART1EN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR SPI6EN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR I2C4EN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR DAC2EN LL_C1_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR COMP12EN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR VREFEN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_EnableClock\n |
| * APB4ENR SAI4EN LL_C1_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR DTSEN LL_C1_APB4_GRP1_EnableClock\n (*) |
| * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_EnableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB4_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB4ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB4ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C1 APB4 peripheral clock is enabled or not |
| * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPUART1EN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR SPI6EN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR I2C4EN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR COMP12EN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR VREFEN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR SAI4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR DTSEN LL_C1_APB4_GRP1_IsEnabledClock\n (*) |
| * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_IsEnabledClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C1_APB4_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C1->APB4ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C1 APB4 peripherals clock. |
| * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR LPUART1EN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR SPI6EN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR I2C4EN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR COMP12EN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR VREFEN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_DisableClock\n |
| * APB4ENR SAI4EN LL_C1_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR DTSEN LL_C1_APB4_GRP1_DisableClock\n (*) |
| * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_DisableClock (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB4_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB4ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C1 APB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR VREFLPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_EnableClockSleep\n |
| * APB4ENR SAI4EN LL_C1_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4ENR DTSEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) |
| * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_EnableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB4_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C1->APB4LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C1->APB4LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C1 APB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR VREFLPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_DisableClockSleep\n |
| * APB4ENR SAI4EN LL_C1_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4ENR DTSEN LL_C1_APB4_GRP1_DisableClockSleep\n (*) |
| * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_DisableClockSleep (*) |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) |
| * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C1_APB4_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C1->APB4LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB3 AHB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 AHB3 peripherals clock. |
| * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR FMCEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_EnableClock\n |
| * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 AHB3 peripheral clock is enabled or not |
| * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR FMCEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->AHB3ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 AHB3 peripherals clock. |
| * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR FMCEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_DisableClock\n |
| * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 AHB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n |
| * AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB3LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB3LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 AHB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n |
| * AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D |
| * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI |
| * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM |
| * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB3LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB1 AHB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ARTEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n |
| * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB1ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB1ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 AHB1 peripheral clock is enabled or not |
| * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ARTEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->AHB1ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ARTEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n |
| * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB1ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n |
| * AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB1LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB1LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n |
| * AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ART |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS |
| * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB1LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB2 AHB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 AHB2 peripherals clock. |
| * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_EnableClock\n |
| * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_EnableClock\n |
| * AHB2ENR HASHEN LL_C2_AHB2_GRP1_EnableClock\n |
| * AHB2ENR RNGEN LL_C2_AHB2_GRP1_EnableClock\n |
| * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 AHB2 peripheral clock is enabled or not |
| * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR HASHEN LL_C2_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR RNGEN LL_C2_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->AHB2ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 AHB2 peripherals clock. |
| * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_DisableClock\n |
| * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_DisableClock\n |
| * AHB2ENR HASHEN LL_C2_AHB2_GRP1_DisableClock\n |
| * AHB2ENR RNGEN LL_C2_AHB2_GRP1_DisableClock\n |
| * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 AHB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n |
| * AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 AHB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n |
| * AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI |
| * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB4 AHB4 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 AHB4 peripherals clock. |
| * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR CRCEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_EnableClock\n |
| * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB4ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB4ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 AHB4 peripheral clock is enabled or not |
| * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR CRCEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_IsEnabledClock\n |
| * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->AHB4ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 AHB4 peripherals clock. |
| * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR CRCEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_DisableClock\n |
| * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 |
| * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB4ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 AHB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n |
| * AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->AHB4LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->AHB4LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 AHB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n |
| * AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ |
| * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK |
| * @arg @ref LL_AHB4_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA |
| * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 |
| * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM |
| * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->AHB4LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB3 APB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 APB3 peripherals clock. |
| * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_EnableClock\n |
| * APB3ENR DSIEN LL_C2_APB3_GRP1_EnableClock\n |
| * APB3ENR WWDG1EN LL_C2_APB3_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 APB3 peripheral clock is enabled or not |
| * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_IsEnabledClock\n |
| * APB3ENR DSIEN LL_C2_APB3_GRP1_IsEnabledClock\n |
| * APB3ENR WWDG1EN LL_C2_APB3_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_APB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->APB3ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 APB3 peripherals clock. |
| * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_DisableClock\n |
| * APB3ENR DSIEN LL_C2_APB3_GRP1_DisableClock\n |
| * APB3ENR WWDG1EN LL_C2_APB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 APB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_EnableClockSleep\n |
| * APB3LPENR DSILPEN LL_C2_APB3_GRP1_EnableClockSleep\n |
| * APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB3_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB3LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB3LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 APB3 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_DisableClockSleep\n |
| * APB3LPENR DSILPEN LL_C2_APB3_GRP1_DisableClockSleep\n |
| * APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB3_GRP1_PERIPH_LTDC |
| * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) |
| * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB3_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB3LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB1 APB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 APB1 peripherals clock. |
| * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM3EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM4EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM5EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM6EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM7EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM12EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM13EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR TIM14EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR WWDG2EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR SPI2EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR SPI3EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR USART2EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR USART3EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR UART4EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR UART5EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C1EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C2EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR I2C3EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR CECEN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR DAC12EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR UART7EN LL_C2_APB1_GRP1_EnableClock\n |
| * APB1LENR UART8EN LL_C2_APB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB1LENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB1LENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 APB1 peripheral clock is enabled or not |
| * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM3EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM4EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM5EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM6EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM7EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM12EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM13EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR TIM14EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR WWDG2EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPI2EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPI3EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR USART2EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR USART3EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART4EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART5EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C1EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C2EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR I2C3EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR CECEN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR DAC12EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART7EN LL_C2_APB1_GRP1_IsEnabledClock\n |
| * APB1LENR UART8EN LL_C2_APB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_APB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->APB1LENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 APB1 peripherals clock. |
| * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM3EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM4EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM5EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM6EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM7EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM12EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM13EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR TIM14EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR WWDG2EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR SPI2EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR SPI3EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR USART2EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR USART3EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR UART4EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR UART5EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C1EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C2EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR I2C3EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR CECEN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR DAC12EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR UART7EN LL_C2_APB1_GRP1_DisableClock\n |
| * APB1LENR UART8EN LL_C2_APB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB1LENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR CECLPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n |
| * APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB1LLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB1LLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR CECLPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n |
| * APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CEC |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB1LLPENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 APB1 peripherals clock. |
| * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_EnableClock\n |
| * APB1HENR SWPMIEN LL_C2_APB1_GRP2_EnableClock\n |
| * APB1HENR OPAMPEN LL_C2_APB1_GRP2_EnableClock\n |
| * APB1HENR MDIOSEN LL_C2_APB1_GRP2_EnableClock\n |
| * APB1HENR FDCANEN LL_C2_APB1_GRP2_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP2_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB1HENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB1HENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 APB1 peripheral clock is enabled or not |
| * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR SWPMIEN LL_C2_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR OPAMPEN LL_C2_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR MDIOSEN LL_C2_APB1_GRP2_IsEnabledClock\n |
| * APB1HENR FDCANEN LL_C2_APB1_GRP2_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_APB1_GRP2_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->APB1HENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 APB1 peripherals clock. |
| * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_DisableClock\n |
| * APB1HENR SWPMIEN LL_C2_APB1_GRP2_DisableClock\n |
| * APB1HENR OPAMPEN LL_C2_APB1_GRP2_DisableClock\n |
| * APB1HENR MDIOSEN LL_C2_APB1_GRP2_DisableClock\n |
| * APB1HENR FDCANEN LL_C2_APB1_GRP2_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP2_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB1HENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n |
| * APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP2_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB1HLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB1HLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n |
| * APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB1_GRP2_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB1HLPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB2 APB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 APB2 peripherals clock. |
| * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM8EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR USART1EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR USART6EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI1EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI4EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM15EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM16EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM17EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI5EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI1EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI2EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI3EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_EnableClock\n |
| * APB2ENR HRTIMEN LL_C2_APB2_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 APB2 peripheral clock is enabled or not |
| * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM8EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART1EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART6EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI1EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI4EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM15EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM16EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM17EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI5EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI1EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI2EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI3EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR HRTIMEN LL_C2_APB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_APB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->APB2ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 APB2 peripherals clock. |
| * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM8EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR USART1EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR USART6EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI1EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI4EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM15EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM16EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM17EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI5EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI1EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI2EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI3EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_DisableClock\n |
| * APB2ENR HRTIMEN LL_C2_APB2_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART6LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR USART1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR USART6LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART6 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB4 APB4 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable C2 APB4 peripherals clock. |
| * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR LPUART1EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR SPI6EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR I2C4EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR COMP12EN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR VREFEN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_EnableClock\n |
| * APB4ENR SAI4EN LL_C2_APB4_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB4_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB4ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB4ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if C2 APB4 peripheral clock is enabled or not |
| * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPUART1EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR SPI6EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR I2C4EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR COMP12EN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR VREFEN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_IsEnabledClock\n |
| * APB4ENR SAI4EN LL_C2_APB4_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 |
| * @retval uint32_t |
| */ |
| __STATIC_INLINE uint32_t LL_C2_APB4_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC_C2->APB4ENR, Periphs) == Periphs)?1U:0U); |
| } |
| |
| /** |
| * @brief Disable C2 APB4 peripherals clock. |
| * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR LPUART1EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR SPI6EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR I2C4EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR COMP12EN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR VREFEN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_DisableClock\n |
| * APB4ENR SAI4EN LL_C2_APB4_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB4_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB4ENR, Periphs); |
| } |
| |
| /** |
| * @brief Enable C2 APB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR VREFLPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_EnableClockSleep\n |
| * APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB4_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC_C2->APB4LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC_C2->APB4LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable C2 APB4 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR VREFLPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_DisableClockSleep\n |
| * APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 |
| * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 |
| * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 |
| * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 |
| * @arg @ref LL_APB4_GRP1_PERIPH_VREF |
| * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_C2_APB4_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC_C2->APB4LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #endif /*DUAL_CORE*/ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(RCC) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_LL_BUS_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
