| /** |
| ****************************************************************************** |
| * @file stm32h7xx_hal_cryp.h |
| * @author MCD Application Team |
| * @brief Header file of CRYP HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_HAL_CRYP_H |
| #define STM32H7xx_HAL_CRYP_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx_hal_def.h" |
| |
| /** @addtogroup STM32H7xx_HAL_Driver |
| * @{ |
| */ |
| #if defined (CRYP) |
| /** @addtogroup CRYP |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup CRYP_Exported_Types CRYP Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief CRYP Init Structure definition |
| */ |
| |
| typedef struct |
| { |
| uint32_t DataType; /*!< no swap(32-bit data), halfword swap(16-bit data), byte swap(8-bit data) |
| or bit swap(1-bit data).this parameter can be a value of @ref CRYP_Data_Type */ |
| uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1. |
| This parameter can be a value of @ref CRYP_Key_Size */ |
| uint32_t *pKey; /*!< The key used for encryption/decryption */ |
| uint32_t *pInitVect; /*!< The initialization vector used also as initialization |
| counter in CTR mode */ |
| uint32_t Algorithm; /*!< DES/ TDES Algorithm ECB/CBC |
| AES Algorithm ECB/CBC/CTR/GCM or CCM |
| This parameter can be a value of @ref CRYP_Algorithm_Mode */ |
| uint32_t *Header; /*!< used only in AES GCM and CCM Algorithm for authentication, |
| GCM : also known as Additional Authentication Data |
| CCM : named B1 composed of the associated data length and Associated Data. */ |
| uint32_t HeaderSize; /*!< The size of header buffer */ |
| uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */ |
| uint32_t DataWidthUnit; /*!< Payload data Width Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/ |
| uint32_t HeaderWidthUnit; /*!< Header Width Unit, this parameter can be value of @ref CRYP_Header_Width_Unit*/ |
| uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, to configure Key and Initialization |
| Vector only once and to skip configuration for consecutive processing. |
| This parameter can be a value of @ref CRYP_Configuration_Skip */ |
| |
| } CRYP_ConfigTypeDef; |
| |
| |
| /** |
| * @brief CRYP State Structure definition |
| */ |
| |
| typedef enum |
| { |
| HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ |
| HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ |
| HAL_CRYP_STATE_BUSY = 0x02U /*!< CRYP BUSY, internal processing is ongoing */ |
| } HAL_CRYP_STATETypeDef; |
| |
| |
| /** |
| * @brief CRYP handle Structure definition |
| */ |
| |
| #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) |
| typedef struct __CRYP_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ |
| { |
| |
| CRYP_TypeDef *Instance; /*!< CRYP registers base address */ |
| |
| CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */ |
| |
| uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ |
| |
| uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ |
| |
| __IO uint16_t CrypHeaderCount; /*!< Counter of header data */ |
| |
| __IO uint16_t CrypInCount; /*!< Counter of input data */ |
| |
| __IO uint16_t CrypOutCount; /*!< Counter of output data */ |
| |
| uint16_t Size; /*!< length of input data in word or in byte, according to DataWidthUnit */ |
| |
| uint32_t Phase; /*!< CRYP peripheral phase */ |
| |
| DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ |
| |
| DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ |
| |
| HAL_LockTypeDef Lock; /*!< CRYP locking object */ |
| |
| __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ |
| |
| __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */ |
| |
| uint32_t Version; /*!< CRYP1 IP version*/ |
| |
| uint32_t KeyIVConfig; /*!< CRYP peripheral Key and IV configuration flag, used when |
| configuration can be skipped */ |
| |
| uint32_t SizesSum; /*!< Sum of successive payloads lengths (in bytes), stored |
| for a single signature computation after several |
| messages processing */ |
| |
| #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) |
| void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Input FIFO transfer completed callback */ |
| void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Output FIFO transfer completed callback */ |
| void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Error callback */ |
| |
| void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp Init callback */ |
| void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp DeInit callback */ |
| |
| #endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ |
| |
| } CRYP_HandleTypeDef; |
| |
| |
| /** |
| * @} |
| */ |
| |
| #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) |
| /** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition |
| * @brief HAL CRYP Callback ID enumeration definition |
| * @{ |
| */ |
| typedef enum |
| { |
| HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x01U, /*!< CRYP Input FIFO transfer completed callback ID */ |
| HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Output FIFO transfer completed callback ID */ |
| HAL_CRYP_ERROR_CB_ID = 0x03U, /*!< CRYP Error callback ID */ |
| |
| HAL_CRYP_MSPINIT_CB_ID = 0x04U, /*!< CRYP MspInit callback ID */ |
| HAL_CRYP_MSPDEINIT_CB_ID = 0x05U /*!< CRYP MspDeInit callback ID */ |
| |
| } HAL_CRYP_CallbackIDTypeDef; |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition |
| * @brief HAL CRYP Callback pointer definition |
| * @{ |
| */ |
| |
| typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp); /*!< pointer to a common CRYP callback function */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup CRYP_Exported_Constants CRYP Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup CRYP_Error_Definition CRYP Error Definition |
| * @{ |
| */ |
| #define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */ |
| #define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */ |
| #define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */ |
| #define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */ |
| #define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */ |
| #define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ |
| #define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */ |
| #define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */ |
| #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) |
| #define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */ |
| #endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit |
| * @{ |
| */ |
| |
| #define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */ |
| #define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< Size unit is byte, but all input will be loaded in HW CRYPT IP by block of 4 words */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit |
| * @{ |
| */ |
| |
| #define CRYP_HEADERWIDTHUNIT_WORD 0x00000000U /*!< By default, header size unit is word */ |
| #define CRYP_HEADERWIDTHUNIT_BYTE 0x00000001U /*!< Size unit is byte, but all input will be loaded in HW CRYPT IP by block of 4 words */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode |
| * @{ |
| */ |
| |
| #define CRYP_DES_ECB CRYP_CR_ALGOMODE_DES_ECB |
| #define CRYP_DES_CBC CRYP_CR_ALGOMODE_DES_CBC |
| #define CRYP_TDES_ECB CRYP_CR_ALGOMODE_TDES_ECB |
| #define CRYP_TDES_CBC CRYP_CR_ALGOMODE_TDES_CBC |
| #define CRYP_AES_ECB CRYP_CR_ALGOMODE_AES_ECB |
| #define CRYP_AES_CBC CRYP_CR_ALGOMODE_AES_CBC |
| #define CRYP_AES_CTR CRYP_CR_ALGOMODE_AES_CTR |
| #define CRYP_AES_GCM CRYP_CR_ALGOMODE_AES_GCM |
| #define CRYP_AES_CCM CRYP_CR_ALGOMODE_AES_CCM |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Key_Size CRYP Key Size |
| * @{ |
| */ |
| |
| #define CRYP_KEYSIZE_128B 0x00000000U |
| #define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0 |
| #define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1 |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Data_Type CRYP Data Type |
| * @{ |
| */ |
| |
| #define CRYP_NO_SWAP 0x00000000U |
| #define CRYP_HALFWORD_SWAP CRYP_CR_DATATYPE_0 |
| #define CRYP_BYTE_SWAP CRYP_CR_DATATYPE_1 |
| #define CRYP_BIT_SWAP CRYP_CR_DATATYPE |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Interrupt CRYP Interrupt |
| * @{ |
| */ |
| |
| #define CRYP_IT_INI CRYP_IMSCR_INIM /*!< Input FIFO Interrupt */ |
| #define CRYP_IT_OUTI CRYP_IMSCR_OUTIM /*!< Output FIFO Interrupt */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Flags CRYP Flags |
| * @{ |
| */ |
| |
| /* Flags in the SR register */ |
| #define CRYP_FLAG_IFEM CRYP_SR_IFEM /*!< Input FIFO is empty */ |
| #define CRYP_FLAG_IFNF CRYP_SR_IFNF /*!< Input FIFO is not Full */ |
| #define CRYP_FLAG_OFNE CRYP_SR_OFNE /*!< Output FIFO is not empty */ |
| #define CRYP_FLAG_OFFU CRYP_SR_OFFU /*!< Output FIFO is Full */ |
| #define CRYP_FLAG_BUSY CRYP_SR_BUSY /*!< The CRYP core is currently processing a block of data |
| or a key preparation (for AES decryption). */ |
| /* Flags in the RISR register */ |
| #define CRYP_FLAG_OUTRIS 0x01000002U /*!< Output FIFO service raw interrupt status */ |
| #define CRYP_FLAG_INRIS 0x01000001U /*!< Input FIFO service raw interrupt status*/ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode |
| * @{ |
| */ |
| |
| #define CRYP_KEYIVCONFIG_ALWAYS 0x00000000U /*!< Peripheral Key and IV configuration to do systematically */ |
| #define CRYP_KEYIVCONFIG_ONCE 0x00000001U /*!< Peripheral Key and IV configuration to do only once */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup CRYP_Exported_Macros CRYP Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset CRYP handle state |
| * @param __HANDLE__ specifies the CRYP handle. |
| * @retval None |
| */ |
| #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) |
| #define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\ |
| (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\ |
| (__HANDLE__)->MspInitCallback = NULL;\ |
| (__HANDLE__)->MspDeInitCallback = NULL;\ |
| }while(0) |
| #else |
| #define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET) |
| #endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ |
| |
| /** |
| * @brief Enable/Disable the CRYP peripheral. |
| * @param __HANDLE__: specifies the CRYP handle. |
| * @retval None |
| */ |
| |
| #define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN) |
| #define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN) |
| |
| /** @brief Check whether the specified CRYP status flag is set or not. |
| * @param __FLAG__: specifies the flag to check. |
| * This parameter can be one of the following values for CRYP: |
| * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data |
| * or a key preparation (for AES decryption). |
| * @arg CRYP_FLAG_IFEM: Input FIFO is empty |
| * @arg CRYP_FLAG_IFNF: Input FIFO is not full |
| * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending |
| * @arg CRYP_FLAG_OFNE: Output FIFO is not empty |
| * @arg CRYP_FLAG_OFFU: Output FIFO is full |
| * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending |
| * @retval The state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define CRYP_FLAG_MASK 0x0000001FU |
| |
| #define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__)\ |
| ((((uint8_t)((__FLAG__) >> 24)) == 0x01U)?((((__HANDLE__)->Instance->RISR) &\ |
| ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \ |
| ((((__HANDLE__)->Instance->RISR) &\ |
| ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK))) |
| |
| /** @brief Check whether the specified CRYP interrupt is set or not. |
| * @param __HANDLE__: specifies the CRYP handle. |
| * @param __INTERRUPT__: specifies the interrupt to check. |
| * This parameter can be one of the following values for CRYP: |
| * @arg CRYP_IT_INI: Input FIFO service masked interrupt status |
| * @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status |
| * @retval The state of __INTERRUPT__ (TRUE or FALSE). |
| */ |
| |
| #define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR &\ |
| (__INTERRUPT__)) == (__INTERRUPT__)) |
| |
| /** |
| * @brief Enable the CRYP interrupt. |
| * @param __HANDLE__: specifies the CRYP handle. |
| * @param __INTERRUPT__: CRYP Interrupt. |
| * This parameter can be one of the following values for CRYP: |
| * @ CRYP_IT_INI : Input FIFO service interrupt mask. |
| * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. |
| * @retval None |
| */ |
| |
| #define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the CRYP interrupt. |
| * @param __HANDLE__: specifies the CRYP handle. |
| * @param __INTERRUPT__: CRYP Interrupt. |
| * This parameter can be one of the following values for CRYP: |
| * @ CRYP_IT_INI : Input FIFO service interrupt mask. |
| * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. |
| * @retval None |
| */ |
| |
| #define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Include CRYP HAL Extended module */ |
| #include "stm32h7xx_hal_cryp_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup CRYP_Exported_Functions CRYP Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup CRYP_Exported_Functions_Group1 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); |
| HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); |
| void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); |
| void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); |
| HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); |
| HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); |
| #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) |
| HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, |
| pCRYP_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID); |
| #endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup CRYP_Exported_Functions_Group2 |
| * @{ |
| */ |
| |
| /* encryption/decryption ***********************************/ |
| HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, |
| uint32_t Timeout); |
| HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, |
| uint32_t Timeout); |
| HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); |
| HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); |
| HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); |
| HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @addtogroup CRYP_Exported_Functions_Group3 |
| * @{ |
| */ |
| /* Interrupt Handler functions **********************************************/ |
| void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); |
| HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); |
| void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); |
| void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); |
| void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); |
| uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros --------------------------------------------------------*/ |
| /** @defgroup CRYP_Private_Macros CRYP Private Macros |
| * @{ |
| */ |
| |
| /** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters |
| * @{ |
| */ |
| |
| #define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_DES_ECB) || \ |
| ((ALGORITHM) == CRYP_DES_CBC) || \ |
| ((ALGORITHM) == CRYP_TDES_ECB) || \ |
| ((ALGORITHM) == CRYP_TDES_CBC) || \ |
| ((ALGORITHM) == CRYP_AES_ECB) || \ |
| ((ALGORITHM) == CRYP_AES_CBC) || \ |
| ((ALGORITHM) == CRYP_AES_CTR) || \ |
| ((ALGORITHM) == CRYP_AES_GCM) || \ |
| ((ALGORITHM) == CRYP_AES_CCM)) |
| |
| #define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \ |
| ((KEYSIZE) == CRYP_KEYSIZE_192B) || \ |
| ((KEYSIZE) == CRYP_KEYSIZE_256B)) |
| |
| #define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_NO_SWAP) || \ |
| ((DATATYPE) == CRYP_HALFWORD_SWAP) || \ |
| ((DATATYPE) == CRYP_BYTE_SWAP) || \ |
| ((DATATYPE) == CRYP_BIT_SWAP)) |
| |
| #define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \ |
| ((CONFIG) == CRYP_KEYIVCONFIG_ONCE)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup CRYP_Private_Constants CRYP Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| /* Private defines -----------------------------------------------------------*/ |
| /** @defgroup CRYP_Private_Defines CRYP Private Defines |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup CRYP_Private_Variables CRYP Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| /* Private functions prototypes ----------------------------------------------*/ |
| /** @defgroup CRYP_Private_Functions_Prototypes CRYP Private Functions Prototypes |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup CRYP_Private_Functions CRYP Private Functions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| #endif /* CRYP */ |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_HAL_CRYP_H */ |
| |
