/**
  ******************************************************************************
  * @file    stm32h7xx_hal_mdios.h
  * @author  MCD Application Team
  * @brief   Header file of MDIOS HAL module.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_MDIOS_H
#define STM32H7xx_HAL_MDIOS_H

#ifdef __cplusplus
 extern "C" {
#endif


/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"

#if defined (MDIOS)

/** @addtogroup STM32H7xx_HAL_Driver
  * @{
  */

/** @addtogroup MDIOS
  * @{
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup MDIOS_Exported_Types MDIOS Exported Types
  * @{
  */

/** @defgroup MDIOS_Exported_Types_Group1 MDIOS State structures definition
  * @{
  */

typedef enum
{
  HAL_MDIOS_STATE_RESET             = 0x00U,    /*!< Peripheral not yet Initialized or disabled         */
  HAL_MDIOS_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use           */
  HAL_MDIOS_STATE_BUSY              = 0x02U,    /*!< an internal process is ongoing                     */
  HAL_MDIOS_STATE_ERROR             = 0x04U     /*!< Reception process is ongoing                       */
}HAL_MDIOS_StateTypeDef;

/**
  * @}
  */

/** @defgroup MDIOS_Exported_Types_Group2 MDIOS Init Structure definition
  * @{
  */

typedef struct
{
  uint32_t PortAddress;           /*!< Specifies the MDIOS port address.
                                       This parameter can be a value from 0 to 31 */
  uint32_t PreambleCheck;         /*!< Specifies whether the preamble check is enabled or disabled.
                                       This parameter can be a value of @ref MDIOS_Preamble_Check */
}MDIOS_InitTypeDef;

/**
  * @}
  */

/** @defgroup MDIOS_Exported_Types_Group4 MDIOS handle Structure definition
  * @{
  */

#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
typedef struct __MDIOS_HandleTypeDef
#else
typedef struct
#endif
{
  MDIOS_TypeDef                *Instance;     /*!< Register base address       */

  MDIOS_InitTypeDef            Init;          /*!< MDIOS Init Structure        */

  __IO HAL_MDIOS_StateTypeDef  State;         /*!< MDIOS communication state
                                                   This parameter can be a value of of @ref HAL_MDIOS_StateTypeDef */

  __IO uint32_t                ErrorCode;     /*!< Holds the global Error code of the MDIOS HAL status machine
                                                   This parameter can be a value of of @ref MDIOS_Error_Code */

  HAL_LockTypeDef              Lock;          /*!< MDIOS Lock                  */

#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)

  void    (* WriteCpltCallback)  ( struct __MDIOS_HandleTypeDef * hmdios);   /*!< MDIOS Write Complete Callback */
  void    (* ReadCpltCallback)   ( struct __MDIOS_HandleTypeDef * hmdios);  /*!< MDIOS Read  Complete Callback     */
  void    (* ErrorCallback)      ( struct __MDIOS_HandleTypeDef * hmdios);  /*!< MDIOS Error Callback   */
  void    (* WakeUpCallback)     ( struct __MDIOS_HandleTypeDef * hmdios);  /*!< MDIOS Wake UP Callback   */

  void    (* MspInitCallback)    ( struct __MDIOS_HandleTypeDef * hmdios);    /*!< MDIOS Msp Init callback              */
  void    (* MspDeInitCallback)  ( struct __MDIOS_HandleTypeDef * hmdios);    /*!< MDIOS Msp DeInit callback            */

#endif  /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
}MDIOS_HandleTypeDef;

/**
  * @}
  */

#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/**
  * @brief  HAL MDIOS Callback ID enumeration definition
  */
typedef enum
{
  HAL_MDIOS_MSPINIT_CB_ID            = 0x00U,    /*!< MDIOS MspInit callback ID           */
  HAL_MDIOS_MSPDEINIT_CB_ID          = 0x01U,    /*!< MDIOS MspDeInit callback ID         */

  HAL_MDIOS_WRITE_COMPLETE_CB_ID     = 0x02U,    /*!< MDIOS Write Complete Callback ID       */
  HAL_MDIOS_READ_COMPLETE_CB_ID      = 0x03U,    /*!< MDIOS Read Complete Callback ID       */
  HAL_MDIOS_ERROR_CB_ID              = 0x04U,    /*!< MDIOS Error Callback ID         */
  HAL_MDIOS_WAKEUP_CB_ID             = 0x05U     /*!< MDIOS Wake UP Callback ID           */
}HAL_MDIOS_CallbackIDTypeDef;

/**
  * @brief  HAL MDIOS Callback pointer definition
  */
typedef  void (*pMDIOS_CallbackTypeDef)(MDIOS_HandleTypeDef * hmdios); /*!< pointer to an MDIOS callback function */

#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */

/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup MDIOS_Exported_Constants MDIOS Exported Constants
  * @{
  */

/** @defgroup MDIOS_Preamble_Check  MDIOS Preamble Check
  * @{
  */
#define MDIOS_PREAMBLE_CHECK_ENABLE      ((uint32_t)0x00000000U)
#define MDIOS_PREAMBLE_CHECK_DISABLE     MDIOS_CR_DPC
/**
  * @}
  */

/** @defgroup MDIOS_Input_Output_Registers_Definitions MDIOS Input Output Registers Definitions
  * @{
  */
#define MDIOS_REG0                      ((uint32_t)0x00000000U)
#define MDIOS_REG1                      ((uint32_t)0x00000001U)
#define MDIOS_REG2                      ((uint32_t)0x00000002U)
#define MDIOS_REG3                      ((uint32_t)0x00000003U)
#define MDIOS_REG4                      ((uint32_t)0x00000004U)
#define MDIOS_REG5                      ((uint32_t)0x00000005U)
#define MDIOS_REG6                      ((uint32_t)0x00000006U)
#define MDIOS_REG7                      ((uint32_t)0x00000007U)
#define MDIOS_REG8                      ((uint32_t)0x00000008U)
#define MDIOS_REG9                      ((uint32_t)0x00000009U)
#define MDIOS_REG10                     ((uint32_t)0x0000000AU)
#define MDIOS_REG11                     ((uint32_t)0x0000000BU)
#define MDIOS_REG12                     ((uint32_t)0x0000000CU)
#define MDIOS_REG13                     ((uint32_t)0x0000000DU)
#define MDIOS_REG14                     ((uint32_t)0x0000000EU)
#define MDIOS_REG15                     ((uint32_t)0x0000000FU)
#define MDIOS_REG16                     ((uint32_t)0x00000010U)
#define MDIOS_REG17                     ((uint32_t)0x00000011U)
#define MDIOS_REG18                     ((uint32_t)0x00000012U)
#define MDIOS_REG19                     ((uint32_t)0x00000013U)
#define MDIOS_REG20                     ((uint32_t)0x00000014U)
#define MDIOS_REG21                     ((uint32_t)0x00000015U)
#define MDIOS_REG22                     ((uint32_t)0x00000016U)
#define MDIOS_REG23                     ((uint32_t)0x00000017U)
#define MDIOS_REG24                     ((uint32_t)0x00000018U)
#define MDIOS_REG25                     ((uint32_t)0x00000019U)
#define MDIOS_REG26                     ((uint32_t)0x0000001AU)
#define MDIOS_REG27                     ((uint32_t)0x0000001BU)
#define MDIOS_REG28                     ((uint32_t)0x0000001CU)
#define MDIOS_REG29                     ((uint32_t)0x0000001DU)
#define MDIOS_REG30                     ((uint32_t)0x0000001EU)
#define MDIOS_REG31                     ((uint32_t)0x0000001FU)
/**
  * @}
  */

/** @defgroup MDIOS_Registers_Flags  MDIOS Registers Flags
  * @{
  */
#define MDIOS_REG0_FLAG			((uint32_t)0x00000001U)
#define	MDIOS_REG1_FLAG			((uint32_t)0x00000002U)
#define	MDIOS_REG2_FLAG			((uint32_t)0x00000004U)
#define	MDIOS_REG3_FLAG			((uint32_t)0x00000008U)
#define	MDIOS_REG4_FLAG			((uint32_t)0x00000010U)
#define	MDIOS_REG5_FLAG			((uint32_t)0x00000020U)
#define	MDIOS_REG6_FLAG			((uint32_t)0x00000040U)
#define	MDIOS_REG7_FLAG			((uint32_t)0x00000080U)
#define	MDIOS_REG8_FLAG			((uint32_t)0x00000100U)
#define	MDIOS_REG9_FLAG			((uint32_t)0x00000200U)
#define	MDIOS_REG10_FLAG		((uint32_t)0x00000400U)
#define	MDIOS_REG11_FLAG		((uint32_t)0x00000800U)
#define	MDIOS_REG12_FLAG		((uint32_t)0x00001000U)
#define	MDIOS_REG13_FLAG		((uint32_t)0x00002000U)
#define	MDIOS_REG14_FLAG		((uint32_t)0x00004000U)
#define	MDIOS_REG15_FLAG		((uint32_t)0x00008000U)
#define	MDIOS_REG16_FLAG		((uint32_t)0x00010000U)
#define	MDIOS_REG17_FLAG		((uint32_t)0x00020000U)
#define	MDIOS_REG18_FLAG		((uint32_t)0x00040000U)
#define	MDIOS_REG19_FLAG		((uint32_t)0x00080000U)
#define	MDIOS_REG20_FLAG		((uint32_t)0x00100000U)
#define	MDIOS_REG21_FLAG		((uint32_t)0x00200000U)
#define	MDIOS_REG22_FLAG		((uint32_t)0x00400000U)
#define	MDIOS_REG23_FLAG		((uint32_t)0x00800000U)
#define	MDIOS_REG24_FLAG		((uint32_t)0x01000000U)
#define	MDIOS_REG25_FLAG		((uint32_t)0x02000000U)
#define	MDIOS_REG26_FLAG		((uint32_t)0x04000000U)
#define	MDIOS_REG27_FLAG		((uint32_t)0x08000000U)
#define	MDIOS_REG28_FLAG		((uint32_t)0x10000000U)
#define	MDIOS_REG29_FLAG		((uint32_t)0x20000000U)
#define	MDIOS_REG30_FLAG		((uint32_t)0x40000000U)
#define	MDIOS_REG31_FLAG		((uint32_t)0x80000000U)
#define	MDIOS_ALLREG_FLAG		((uint32_t)0xFFFFFFFFU)
/**
  * @}
  */

/** @defgroup MDIOS_Interrupt_sources Interrupt Sources
  * @{
  */
#define MDIOS_IT_WRITE                   MDIOS_CR_WRIE
#define MDIOS_IT_READ                    MDIOS_CR_RDIE
#define MDIOS_IT_ERROR                   MDIOS_CR_EIE
/**
  * @}
  */

/** @defgroup MDIOS_Interrupt_Flags  MDIOS Interrupt Flags
  * @{
  */
#define	MDIOS_TURNAROUND_ERROR_FLAG       MDIOS_SR_TERF
#define	MDIOS_START_ERROR_FLAG            MDIOS_SR_SERF
#define	MDIOS_PREAMBLE_ERROR_FLAG         MDIOS_SR_PERF
/**
  * @}
  */

/** @defgroup MDIOS_Error_Code MDIOS Error Code
  * @{
  */
#define HAL_MDIOS_ERROR_NONE         ((uint32_t)0x00000000U)   /*!< No error            */
#define HAL_MDIOS_ERROR_PARAM        ((uint32_t)0x00000001U)   /*!< Busy error          */
#define HAL_MDIOS_ERROR_BUSY         ((uint32_t)0x00000002U)   /*!< Parameter error     */
#define HAL_MDIOS_ERROR_TIMEOUT      ((uint32_t)0x00000004U)   /*!< Timeout error       */
#define HAL_MDIOS_ERROR_DATA         ((uint32_t)0x00000010U)   /*!< Data transfer error       */
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
#define HAL_MDIOS_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U)    /*!< Invalid Callback error  */
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/**
  * @}
  */

 /** @defgroup MDIOS_Wakeup_Line  MDIOS Wakeup Line
  * @{
  */
#define MDIOS_WAKEUP_EXTI_LINE  ((uint32_t)0x00000400)  /* !<  42 - 32 = 10 */
/**
  * @}
  */

/**
  * @}
  */
/* Exported macros -----------------------------------------------------------*/
/** @defgroup MDIOS_Exported_Macros MDIOS Exported Macros
  * @{
  */

/** @brief Reset MDIOS handle state
  * @param  __HANDLE__: MDIOS handle.
  * @retval None
  */
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
                                                       (__HANDLE__)->State = HAL_MDIOS_STATE_RESET;      \
                                                       (__HANDLE__)->MspInitCallback = NULL;             \
                                                       (__HANDLE__)->MspDeInitCallback = NULL;           \
                                                     } while(0)
#else
#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MDIOS_STATE_RESET)
#endif /*USE_HAL_MDIOS_REGISTER_CALLBACKS */

/**
  * @brief  Enable/Disable the MDIOS peripheral.
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @retval None
  */
#define __HAL_MDIOS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= MDIOS_CR_EN)
#define __HAL_MDIOS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~MDIOS_CR_EN)


/**
  * @brief  Enable the MDIOS device interrupt.
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __INTERRUPT__ : specifies the MDIOS interrupt sources to be enabled.
  *         This parameter can be one or a combination of the following values:
  *            @arg MDIOS_IT_WRITE: Register write interrupt
  *            @arg MDIOS_IT_READ: Register read interrupt
  *            @arg MDIOS_IT_ERROR: Error interrupt
  * @retval None
  */
#define __HAL_MDIOS_ENABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))

/**
  * @brief  Disable the MDIOS device interrupt.
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __INTERRUPT__ : specifies the MDIOS interrupt sources to be disabled.
  *         This parameter can be one or a combination of the following values:
  *            @arg MDIOS_IT_WRITE: Register write interrupt
  *            @arg MDIOS_IT_READ: Register read interrupt
  *            @arg MDIOS_IT_ERROR: Error interrupt
  * @retval None
  */
#define __HAL_MDIOS_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

/** @brief Set MDIOS slave get write register flag
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __FLAG__: specifies the write register flag
  * @retval The state of write flag
  */
#define __HAL_MDIOS_GET_WRITE_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->WRFR &  (__FLAG__))

/** @brief MDIOS slave get read register flag
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __FLAG__: specifies the read register flag
  * @retval The state of read flag
  */
#define __HAL_MDIOS_GET_READ_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->RDFR &  (__FLAG__))

/** @brief MDIOS slave get interrupt
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __FLAG__ : specifies the Error flag.
  *         This parameter can be one or a combination of the following values:
  *            @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt
  *            @arg MDIOS_START_ERROR_FLAG: Register read interrupt
  *            @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt
  * @retval The state of the error flag
  */
#define __HAL_MDIOS_GET_ERROR_FLAG(__HANDLE__, __FLAG__)       ((__HANDLE__)->Instance->SR &  (__FLAG__))

/** @brief  MDIOS slave clear interrupt
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __FLAG__ : specifies the Error flag.
  *         This parameter can be one or a combination of the following values:
  *            @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt
  *            @arg MDIOS_START_ERROR_FLAG: Register read interrupt
  *            @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt
  * @retval none
  */
#define __HAL_MDIOS_CLEAR_ERROR_FLAG(__HANDLE__, __FLAG__)       ((__HANDLE__)->Instance->CLRFR) |= (__FLAG__)

/**
  * @brief  Checks whether the specified MDIOS interrupt is set or not.
  * @param  __HANDLE__: specifies the MDIOS handle.
  * @param  __INTERRUPT__ : specifies the MDIOS interrupt sources
  *            This parameter can be one or a combination of the following values:
  *            @arg MDIOS_IT_WRITE: Register write interrupt
  *            @arg MDIOS_IT_READ: Register read interrupt
  *            @arg MDIOS_IT_ERROR: Error interrupt
  * @retval The state of the interrupt source
  */
#define __HAL_MDIOS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))

/**
  * @brief Enable the MDIOS WAKEUP Exti Line.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be enabled.
  * This parameter can be:
  *   @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None.
  */
#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_IT(__EXTI_LINE__)   (EXTI->IMR2 |= (__EXTI_LINE__))

#if defined(DUAL_CORE)
/**
  * @brief Enable the MDIOS WAKEUP Exti Line by Domain2.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be enabled.
  * This parameter can be:
  *   @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None.
  */
#define __HAL_MDIOS_WAKEUP_EXTID2_ENABLE_IT(__EXTI_LINE__)   (EXTI->C2IMR2 |= (__EXTI_LINE__))

#endif
/**
  * @brief checks whether the specified MDIOS WAKEUP Exti interrupt flag is set or not.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
  * This parameter can be:
  *   @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval EXTI MDIOS WAKEUP Line Status.
  */
#define __HAL_MDIOS_WAKEUP_EXTI_GET_FLAG(__EXTI_LINE__)  (EXTI->PR2 & (__EXTI_LINE__))

#if defined(DUAL_CORE)
/**
  * @brief checks whether the specified MDIOS WAKEUP Exti interrupt flag is set or not.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
  * This parameter can be:
  *   @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval EXTI MDIOS WAKEUP Line Status.
  */
#define __HAL_MDIOS_WAKEUP_EXTID2_GET_FLAG(__EXTI_LINE__)  (EXTI->C2PR2 & (__EXTI_LINE__))
#endif
/**
  * @brief Clear the MDIOS WAKEUP Exti flag.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
  * This parameter can be:
  *   @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None.
  */
#define __HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR2 = (__EXTI_LINE__))

#if defined(DUAL_CORE)
/**
  * @brief Clear the MDIOS WAKEUP Exti flag.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
  * This parameter can be:
  *   @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None.
  */
#define __HAL_MDIOS_WAKEUP_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI->C2PR2 = (__EXTI_LINE__))

#endif
/**
  * @brief  enable rising edge interrupt on selected EXTI line.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
  * This parameter can be:
  *  @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None
  */
#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_EDGE(__EXTI_LINE__) (EXTI->FTSR2 &= ~(__EXTI_LINE__)); \
                                                                   (EXTI->RTSR2 |= (__EXTI_LINE__))

/**
  * @brief  enable falling edge interrupt on selected EXTI line.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
  * This parameter can be:
  *  @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None
  */
#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 &= ~(__EXTI_LINE__));\
                                                                 (EXTI->FTSR2 |= (__EXTI_LINE__))

/**
  * @brief  enable falling edge interrupt on selected EXTI line.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
  * This parameter can be:
  *  @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None
  */
#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 |= (__EXTI_LINE__));\
                                                                          (EXTI->FTSR2 |= (__EXTI_LINE__))

/**
  * @brief  Generates a Software interrupt on selected EXTI line.
  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
  * This parameter can be:
  *  @arg MDIOS_WAKEUP_EXTI_LINE
  * @retval None
  */
#define __HAL_MDIOS_WAKEUP_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER2 |= (__EXTI_LINE__))

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @defgroup MDIOS_Exported_Functions MDIOS Exported Functions
  * @{
  */

/** @addtogroup MDIOS_Exported_Functions_Group1
  * @{
  */
HAL_StatusTypeDef HAL_MDIOS_Init(MDIOS_HandleTypeDef *hmdios);
HAL_StatusTypeDef HAL_MDIOS_DeInit(MDIOS_HandleTypeDef *hmdios);
void HAL_MDIOS_MspInit(MDIOS_HandleTypeDef *hmdios);
void  HAL_MDIOS_MspDeInit(MDIOS_HandleTypeDef *hmdios);

/* Callbacks Register/UnRegister functions  ***********************************/
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_MDIOS_RegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID, pMDIOS_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_MDIOS_UnRegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/**
  * @}
  */

/** @addtogroup MDIOS_Exported_Functions_Group2
  * @{
  */
HAL_StatusTypeDef HAL_MDIOS_WriteReg(MDIOS_HandleTypeDef *hmdios,  uint32_t RegNum, uint16_t Data);
HAL_StatusTypeDef HAL_MDIOS_ReadReg(MDIOS_HandleTypeDef *hmdios,  uint32_t RegNum, uint16_t *pData);

uint32_t HAL_MDIOS_GetWrittenRegAddress(MDIOS_HandleTypeDef *hmdios);
uint32_t HAL_MDIOS_GetReadRegAddress(MDIOS_HandleTypeDef *hmdios);
HAL_StatusTypeDef HAL_MDIOS_ClearWriteRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum);
HAL_StatusTypeDef HAL_MDIOS_ClearReadRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum);

HAL_StatusTypeDef HAL_MDIOS_EnableEvents(MDIOS_HandleTypeDef *hmdios);
void HAL_MDIOS_IRQHandler(MDIOS_HandleTypeDef *hmdios);
void HAL_MDIOS_WriteCpltCallback(MDIOS_HandleTypeDef *hmdios);
void HAL_MDIOS_ReadCpltCallback(MDIOS_HandleTypeDef *hmdios);
void HAL_MDIOS_ErrorCallback(MDIOS_HandleTypeDef *hmdios);
void HAL_MDIOS_WakeUpCallback(MDIOS_HandleTypeDef *hmdios);
/**
  * @}
  */

/** @addtogroup MDIOS_Exported_Functions_Group3
  * @{
  */
uint32_t HAL_MDIOS_GetError(MDIOS_HandleTypeDef *hmdios);
HAL_MDIOS_StateTypeDef HAL_MDIOS_GetState(MDIOS_HandleTypeDef *hmdios);
/**
  * @}
  */

/**
  * @}
  */

/* Private types -------------------------------------------------------------*/
/** @defgroup MDIOS_Private_Types MDIOS Private Types
  * @{
  */

/**
  * @}
  */

/* Private variables ---------------------------------------------------------*/
/** @defgroup MDIOS_Private_Variables MDIOS Private Variables
  * @{
  */

/**
  * @}
  */

/* Private constants ---------------------------------------------------------*/
/** @defgroup MDIOS_Private_Constants MDIOS Private Constants
  * @{
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup MDIOS_Private_Macros MDIOS Private Macros
  * @{
  */

#define IS_MDIOS_PORTADDRESS(__ADDR__) ((__ADDR__) < 32U)

#define IS_MDIOS_REGISTER(__REGISTER__) ((__REGISTER__) < 32U)

#define IS_MDIOS_PREAMBLECHECK(__PREAMBLECHECK__) (((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_ENABLE) || \
                                                   ((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_DISABLE))

 /**
  * @}
  */

/* Private functions ---------------------------------------------------------*/
/** @defgroup MDIOS_Private_Functions MDIOS Private Functions
  * @{
  */

/**
  * @}
  */


/**
  * @}
  */

/**
  * @}
  */

#endif /* MDIOS */

#ifdef __cplusplus
}
#endif

#endif /* STM32H7xx_HAL_MDIOS_H */