| /** |
| ****************************************************************************** |
| * @file stm32l0xx_ll_spi.c |
| * @author MCD Application Team |
| * @brief SPI LL module driver. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| #if defined(USE_FULL_LL_DRIVER) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l0xx_ll_spi.h" |
| #include "stm32l0xx_ll_bus.h" |
| #include "stm32l0xx_ll_rcc.h" |
| |
| #ifdef USE_FULL_ASSERT |
| #include "stm32_assert.h" |
| #else |
| #define assert_param(expr) ((void)0U) |
| #endif /* USE_FULL_ASSERT */ |
| |
| /** @addtogroup STM32L0xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (SPI1) || defined (SPI2) |
| |
| /** @addtogroup SPI_LL |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup SPI_LL_Private_Constants SPI Private Constants |
| * @{ |
| */ |
| /* SPI registers Masks */ |
| #define SPI_CR1_CLEAR_MASK (SPI_CR1_CPHA | SPI_CR1_CPOL | SPI_CR1_MSTR | \ |
| SPI_CR1_BR | SPI_CR1_LSBFIRST | SPI_CR1_SSI | \ |
| SPI_CR1_SSM | SPI_CR1_RXONLY | SPI_CR1_DFF | \ |
| SPI_CR1_CRCNEXT | SPI_CR1_CRCEN | SPI_CR1_BIDIOE | \ |
| SPI_CR1_BIDIMODE) |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup SPI_LL_Private_Macros SPI Private Macros |
| * @{ |
| */ |
| #define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ |
| || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ |
| || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ |
| || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) |
| |
| #define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \ |
| || ((__VALUE__) == LL_SPI_MODE_SLAVE)) |
| |
| #define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ |
| || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) |
| |
| #define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \ |
| || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) |
| |
| #define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \ |
| || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) |
| |
| #define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ |
| || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ |
| || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) |
| |
| #define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ |
| || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) |
| |
| #define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \ |
| || ((__VALUE__) == LL_SPI_MSB_FIRST)) |
| |
| #define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \ |
| || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) |
| |
| #define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U) |
| |
| /** |
| * @} |
| */ |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup SPI_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup SPI_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief De-initialize the SPI registers to their default reset values. |
| * @param SPIx SPI Instance |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: SPI registers are de-initialized |
| * - ERROR: SPI registers are not de-initialized |
| */ |
| ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx) |
| { |
| ErrorStatus status = ERROR; |
| |
| /* Check the parameters */ |
| assert_param(IS_SPI_ALL_INSTANCE(SPIx)); |
| |
| #if defined(SPI1) |
| if (SPIx == SPI1) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1); |
| |
| /* Release reset of SPI clock */ |
| LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1); |
| |
| status = SUCCESS; |
| } |
| #endif /* SPI1 */ |
| #if defined(SPI2) |
| if (SPIx == SPI2) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2); |
| |
| /* Release reset of SPI clock */ |
| LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2); |
| |
| status = SUCCESS; |
| } |
| #endif /* SPI2 */ |
| |
| return status; |
| } |
| |
| /** |
| * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. |
| * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), |
| * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. |
| * @param SPIx SPI Instance |
| * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value. (Return always SUCCESS) |
| */ |
| ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) |
| { |
| ErrorStatus status = ERROR; |
| |
| /* Check the SPI Instance SPIx*/ |
| assert_param(IS_SPI_ALL_INSTANCE(SPIx)); |
| |
| /* Check the SPI parameters from SPI_InitStruct*/ |
| assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); |
| assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); |
| assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); |
| assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); |
| assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); |
| assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); |
| assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate)); |
| assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); |
| assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); |
| |
| if (LL_SPI_IsEnabled(SPIx) == 0x00000000U) |
| { |
| /*---------------------------- SPIx CR1 Configuration ------------------------ |
| * Configure SPIx CR1 with parameters: |
| * - TransferDirection: SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits |
| * - Master/Slave Mode: SPI_CR1_MSTR bit |
| * - DataWidth: SPI_CR1_DFF bit |
| * - ClockPolarity: SPI_CR1_CPOL bit |
| * - ClockPhase: SPI_CR1_CPHA bit |
| * - NSS management: SPI_CR1_SSM bit |
| * - BaudRate prescaler: SPI_CR1_BR[2:0] bits |
| * - BitOrder: SPI_CR1_LSBFIRST bit |
| * - CRCCalculation: SPI_CR1_CRCEN bit |
| */ |
| MODIFY_REG(SPIx->CR1, |
| SPI_CR1_CLEAR_MASK, |
| SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode | SPI_InitStruct->DataWidth | |
| SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase | |
| SPI_InitStruct->NSS | SPI_InitStruct->BaudRate | |
| SPI_InitStruct->BitOrder | SPI_InitStruct->CRCCalculation); |
| |
| /*---------------------------- SPIx CR2 Configuration ------------------------ |
| * Configure SPIx CR2 with parameters: |
| * - NSS management: SSOE bit |
| */ |
| MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, (SPI_InitStruct->NSS >> 16U)); |
| |
| /*---------------------------- SPIx CRCPR Configuration ---------------------- |
| * Configure SPIx CRCPR with parameters: |
| * - CRCPoly: CRCPOLY[15:0] bits |
| */ |
| if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) |
| { |
| assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); |
| LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); |
| } |
| status = SUCCESS; |
| } |
| |
| #if defined (SPI_I2S_SUPPORT) |
| /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ |
| CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); |
| #endif /* SPI_I2S_SUPPORT */ |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_SPI_InitTypeDef field to default value. |
| * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) |
| { |
| /* Set SPI_InitStruct fields to default values */ |
| SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; |
| SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; |
| SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; |
| SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; |
| SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; |
| SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; |
| SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; |
| SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; |
| SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; |
| SPI_InitStruct->CRCPoly = 7U; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #if defined(SPI_I2S_SUPPORT) |
| /** @addtogroup I2S_LL |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup I2S_LL_Private_Constants I2S Private Constants |
| * @{ |
| */ |
| /* I2S registers Masks */ |
| #define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ |
| SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ |
| SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) |
| |
| #define I2S_I2SPR_CLEAR_MASK 0x0002U |
| /** |
| * @} |
| */ |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup I2S_LL_Private_Macros I2S Private Macros |
| * @{ |
| */ |
| |
| #define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) \ |
| || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \ |
| || ((__VALUE__) == LL_I2S_DATAFORMAT_24B) \ |
| || ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) |
| |
| #define IS_LL_I2S_CPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) \ |
| || ((__VALUE__) == LL_I2S_POLARITY_HIGH)) |
| |
| #define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) \ |
| || ((__VALUE__) == LL_I2S_STANDARD_MSB) \ |
| || ((__VALUE__) == LL_I2S_STANDARD_LSB) \ |
| || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \ |
| || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) |
| |
| #define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) \ |
| || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) \ |
| || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \ |
| || ((__VALUE__) == LL_I2S_MODE_MASTER_RX)) |
| |
| #define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \ |
| || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) |
| |
| #define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) \ |
| && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \ |
| || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) |
| |
| #define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) >= 0x2U) |
| |
| #define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \ |
| || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) |
| /** |
| * @} |
| */ |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup I2S_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup I2S_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief De-initialize the SPI/I2S registers to their default reset values. |
| * @param SPIx SPI Instance |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: SPI registers are de-initialized |
| * - ERROR: SPI registers are not de-initialized |
| */ |
| ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx) |
| { |
| return LL_SPI_DeInit(SPIx); |
| } |
| |
| /** |
| * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. |
| * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), |
| * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. |
| * @param SPIx SPI Instance |
| * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: SPI registers are Initialized |
| * - ERROR: SPI registers are not Initialized |
| */ |
| ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) |
| { |
| uint32_t i2sdiv = 2U; |
| uint32_t i2sodd = 0U; |
| uint32_t packetlength = 1U; |
| uint32_t tmp; |
| LL_RCC_ClocksTypeDef rcc_clocks; |
| uint32_t sourceclock; |
| ErrorStatus status = ERROR; |
| |
| /* Check the I2S parameters */ |
| assert_param(IS_I2S_ALL_INSTANCE(SPIx)); |
| assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); |
| assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); |
| assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); |
| assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); |
| assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); |
| assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); |
| |
| if (LL_I2S_IsEnabled(SPIx) == 0x00000000U) |
| { |
| /*---------------------------- SPIx I2SCFGR Configuration -------------------- |
| * Configure SPIx I2SCFGR with parameters: |
| * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit |
| * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits |
| * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits |
| * - ClockPolarity: SPI_I2SCFGR_CKPOL bit |
| */ |
| |
| /* Write to SPIx I2SCFGR */ |
| MODIFY_REG(SPIx->I2SCFGR, |
| I2S_I2SCFGR_CLEAR_MASK, |
| I2S_InitStruct->Mode | I2S_InitStruct->Standard | |
| I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | |
| SPI_I2SCFGR_I2SMOD); |
| |
| /*---------------------------- SPIx I2SPR Configuration ---------------------- |
| * Configure SPIx I2SPR with parameters: |
| * - MCLKOutput: SPI_I2SPR_MCKOE bit |
| * - AudioFreq: SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits |
| */ |
| |
| /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) |
| * else, default values are used: i2sodd = 0U, i2sdiv = 2U. |
| */ |
| if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) |
| { |
| /* Check the frame length (For the Prescaler computing) |
| * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). |
| */ |
| if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) |
| { |
| /* Packet length is 32 bits */ |
| packetlength = 2U; |
| } |
| |
| /* I2S Clock source is System clock: Get System Clock frequency */ |
| LL_RCC_GetSystemClocksFreq(&rcc_clocks); |
| |
| /* Get the source clock value: based on System Clock value */ |
| sourceclock = rcc_clocks.SYSCLK_Frequency; |
| |
| /* Compute the Real divider depending on the MCLK output state with a floating point */ |
| if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) |
| { |
| /* MCLK output is enabled */ |
| tmp = (((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); |
| } |
| else |
| { |
| /* MCLK output is disabled */ |
| tmp = (((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); |
| } |
| |
| /* Remove the floating point */ |
| tmp = tmp / 10U; |
| |
| /* Check the parity of the divider */ |
| i2sodd = (tmp & (uint16_t)0x0001U); |
| |
| /* Compute the i2sdiv prescaler */ |
| i2sdiv = ((tmp - i2sodd) / 2U); |
| |
| /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ |
| i2sodd = (i2sodd << 8U); |
| } |
| |
| /* Test if the divider is 1 or 0 or greater than 0xFF */ |
| if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) |
| { |
| /* Set the default values */ |
| i2sdiv = 2U; |
| i2sodd = 0U; |
| } |
| |
| /* Write to SPIx I2SPR register the computed value */ |
| WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput); |
| |
| status = SUCCESS; |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_I2S_InitTypeDef field to default value. |
| * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) |
| { |
| /*--------------- Reset I2S init structure parameters values -----------------*/ |
| I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; |
| I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; |
| I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; |
| I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; |
| I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; |
| I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; |
| } |
| |
| /** |
| * @brief Set linear and parity prescaler. |
| * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n |
| * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). |
| * @param SPIx SPI Instance |
| * @param PrescalerLinear value Min_Data=0x02 and Max_Data=0xFF. |
| * @param PrescalerParity This parameter can be one of the following values: |
| * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN |
| * @arg @ref LL_I2S_PRESCALER_PARITY_ODD |
| * @retval None |
| */ |
| void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) |
| { |
| /* Check the I2S parameters */ |
| assert_param(IS_I2S_ALL_INSTANCE(SPIx)); |
| assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); |
| assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); |
| |
| /* Write to SPIx I2SPR */ |
| MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| #endif /* SPI_I2S_SUPPORT */ |
| |
| #endif /* defined (SPI1) || defined (SPI2) */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* USE_FULL_LL_DRIVER */ |
