diff --git a/Inc/Legacy/stm32_hal_legacy.h b/Inc/Legacy/stm32_hal_legacy.h
index 0512ae6..82fe0e9 100644
--- a/Inc/Legacy/stm32_hal_legacy.h
+++ b/Inc/Legacy/stm32_hal_legacy.h
@@ -37,14 +37,12 @@
 #define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
 #define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
 #define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
-#if defined(STM32U5)
+#if defined(STM32H7) || defined(STM32MP1)
 #define CRYP_DATATYPE_32B               CRYP_NO_SWAP
 #define CRYP_DATATYPE_16B               CRYP_HALFWORD_SWAP
 #define CRYP_DATATYPE_8B                CRYP_BYTE_SWAP
 #define CRYP_DATATYPE_1B                CRYP_BIT_SWAP
-#define CRYP_CCF_CLEAR                  CRYP_CLEAR_CCF
-#define CRYP_ERR_CLEAR                  CRYP_CLEAR_RWEIF
-#endif /* STM32U5 */
+#endif /* STM32H7 || STM32MP1 */
 /**
   * @}
   */
@@ -110,6 +108,10 @@
 #define ADC_SAMPLETIME_391CYCLES_5      ADC_SAMPLETIME_391CYCLES
 #define ADC4_SAMPLETIME_160CYCLES_5     ADC4_SAMPLETIME_814CYCLES_5
 #endif /* STM32U5 */
+
+#if defined(STM32H5)
+#define ADC_CHANNEL_VCORE               ADC_CHANNEL_VDDCORE
+#endif /* STM32H5 */
 /**
   * @}
   */
@@ -137,7 +139,8 @@
 #define COMP_EXTI_LINE_COMP6_EVENT     COMP_EXTI_LINE_COMP6
 #define COMP_EXTI_LINE_COMP7_EVENT     COMP_EXTI_LINE_COMP7
 #if defined(STM32L0)
-#define COMP_LPTIMCONNECTION_ENABLED   ((uint32_t)0x00000003U)    /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */
+#define COMP_LPTIMCONNECTION_ENABLED   ((uint32_t)0x00000003U)    /*!< COMPX output generic naming: connected to LPTIM 
+                                                                       input 1 for COMP1, LPTIM input 2 for COMP2 */
 #endif
 #define COMP_OUTPUT_COMP6TIM2OCREFCLR  COMP_OUTPUT_COMP6_TIM2OCREFCLR
 #if defined(STM32F373xC) || defined(STM32F378xx)
@@ -211,6 +214,11 @@
 #endif
 
 #endif
+
+#if defined(STM32U5)
+#define __HAL_COMP_COMP1_EXTI_CLEAR_RASING_FLAG __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG
+#endif
+
 /**
   * @}
   */
@@ -231,9 +239,13 @@
 /** @defgroup CRC_Aliases CRC API aliases
   * @{
   */
-#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
-#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
-
+#if defined(STM32H5) || defined(STM32C0)
+#else
+#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for 
+                                                                          inter STM32 series compatibility  */
+#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for 
+                                                                          inter STM32 series compatibility */
+#endif
 /**
   * @}
   */
@@ -263,7 +275,7 @@
 #define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
 #define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
 
-#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5)
+#if defined(STM32G4) || defined(STM32L5) || defined(STM32H7) || defined (STM32U5)
 #define DAC_CHIPCONNECT_DISABLE       DAC_CHIPCONNECT_EXTERNAL
 #define DAC_CHIPCONNECT_ENABLE        DAC_CHIPCONNECT_INTERNAL
 #endif
@@ -275,7 +287,13 @@
 #define DAC_TRIGGER_LPTIM3_OUT       DAC_TRIGGER_LPTIM3_CH1
 #endif
 
-#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4)
+#if defined(STM32H5)
+#define DAC_TRIGGER_LPTIM1_OUT       DAC_TRIGGER_LPTIM1_CH1
+#define DAC_TRIGGER_LPTIM2_OUT       DAC_TRIGGER_LPTIM2_CH1
+#endif
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || \
+    defined(STM32F4) || defined(STM32G4)
 #define HAL_DAC_MSP_INIT_CB_ID       HAL_DAC_MSPINIT_CB_ID
 #define HAL_DAC_MSP_DEINIT_CB_ID     HAL_DAC_MSPDEINIT_CB_ID
 #endif
@@ -340,7 +358,8 @@
 #define HAL_DMAMUX_REQUEST_GEN_FALLING           HAL_DMAMUX_REQ_GEN_FALLING
 #define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING    HAL_DMAMUX_REQ_GEN_RISING_FALLING
 
-#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \
+    defined(STM32L4S7xx) || defined(STM32L4S9xx)
 #define DMA_REQUEST_DCMI_PSSI                    DMA_REQUEST_DCMI
 #endif
 
@@ -500,7 +519,7 @@
 #define OB_RDP_LEVEL0                 OB_RDP_LEVEL_0
 #define OB_RDP_LEVEL1                 OB_RDP_LEVEL_1
 #define OB_RDP_LEVEL2                 OB_RDP_LEVEL_2
-#if defined(STM32G0)
+#if defined(STM32G0) || defined(STM32C0)
 #define OB_BOOT_LOCK_DISABLE          OB_BOOT_ENTRY_FORCED_NONE
 #define OB_BOOT_LOCK_ENABLE           OB_BOOT_ENTRY_FORCED_FLASH
 #else
@@ -525,6 +544,9 @@
 #define OB_USER_nBOOT0                OB_USER_NBOOT0
 #define OB_nBOOT0_RESET               OB_NBOOT0_RESET
 #define OB_nBOOT0_SET                 OB_NBOOT0_SET
+#define OB_USER_SRAM134_RST           OB_USER_SRAM_RST
+#define OB_SRAM134_RST_ERASE          OB_SRAM_RST_ERASE
+#define OB_SRAM134_RST_NOT_ERASE      OB_SRAM_RST_NOT_ERASE
 #endif /* STM32U5 */
 
 /**
@@ -569,6 +591,106 @@
 #define HAL_SYSCFG_DisableIOAnalogSwitchVDD       HAL_SYSCFG_DisableIOSwitchVDD
 #endif /* STM32G4 */
 
+#if defined(STM32H5)
+#define SYSCFG_IT_FPU_IOC         SBS_IT_FPU_IOC
+#define SYSCFG_IT_FPU_DZC         SBS_IT_FPU_DZC
+#define SYSCFG_IT_FPU_UFC         SBS_IT_FPU_UFC
+#define SYSCFG_IT_FPU_OFC         SBS_IT_FPU_OFC
+#define SYSCFG_IT_FPU_IDC         SBS_IT_FPU_IDC
+#define SYSCFG_IT_FPU_IXC         SBS_IT_FPU_IXC
+
+#define SYSCFG_BREAK_FLASH_ECC    SBS_BREAK_FLASH_ECC
+#define SYSCFG_BREAK_PVD          SBS_BREAK_PVD
+#define SYSCFG_BREAK_SRAM_ECC     SBS_BREAK_SRAM_ECC
+#define SYSCFG_BREAK_LOCKUP       SBS_BREAK_LOCKUP
+
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE0   VREFBUF_VOLTAGE_SCALE0
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE1   VREFBUF_VOLTAGE_SCALE1
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE2   VREFBUF_VOLTAGE_SCALE2
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE3   VREFBUF_VOLTAGE_SCALE3
+
+#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE   VREFBUF_HIGH_IMPEDANCE_DISABLE
+#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE    VREFBUF_HIGH_IMPEDANCE_ENABLE
+
+#define SYSCFG_FASTMODEPLUS_PB6   SBS_FASTMODEPLUS_PB6
+#define SYSCFG_FASTMODEPLUS_PB7   SBS_FASTMODEPLUS_PB7
+#define SYSCFG_FASTMODEPLUS_PB8   SBS_FASTMODEPLUS_PB8
+#define SYSCFG_FASTMODEPLUS_PB9   SBS_FASTMODEPLUS_PB9
+
+#define SYSCFG_ETH_MII   SBS_ETH_MII
+#define SYSCFG_ETH_RMII  SBS_ETH_RMII
+#define IS_SYSCFG_ETHERNET_CONFIG  IS_SBS_ETHERNET_CONFIG
+
+#define SYSCFG_MEMORIES_ERASE_FLAG_IPMEE   SBS_MEMORIES_ERASE_FLAG_IPMEE
+#define SYSCFG_MEMORIES_ERASE_FLAG_MCLR    SBS_MEMORIES_ERASE_FLAG_MCLR
+#define IS_SYSCFG_MEMORIES_ERASE_FLAG      IS_SBS_MEMORIES_ERASE_FLAG
+
+#define IS_SYSCFG_CODE_CONFIG IS_SBS_CODE_CONFIG
+
+#define SYSCFG_MPU_NSEC   SBS_MPU_NSEC
+#define SYSCFG_VTOR_NSEC  SBS_VTOR_NSEC
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+#define SYSCFG_SAU              SBS_SAU
+#define SYSCFG_MPU_SEC          SBS_MPU_SEC
+#define SYSCFG_VTOR_AIRCR_SEC   SBS_VTOR_AIRCR_SEC
+#define SYSCFG_LOCK_ALL         SBS_LOCK_ALL
+#else
+#define SYSCFG_LOCK_ALL         SBS_LOCK_ALL
+#endif /* __ARM_FEATURE_CMSE */
+
+#define SYSCFG_CLK      SBS_CLK
+#define SYSCFG_CLASSB   SBS_CLASSB
+#define SYSCFG_FPU      SBS_FPU
+#define SYSCFG_ALL      SBS_ALL
+
+#define SYSCFG_SEC      SBS_SEC
+#define SYSCFG_NSEC     SBS_NSEC
+
+#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE   __HAL_SBS_FPU_INTERRUPT_ENABLE
+#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE  __HAL_SBS_FPU_INTERRUPT_DISABLE
+
+#define __HAL_SYSCFG_BREAK_ECC_LOCK        __HAL_SBS_BREAK_ECC_LOCK
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK     __HAL_SBS_BREAK_LOCKUP_LOCK
+#define __HAL_SYSCFG_BREAK_PVD_LOCK        __HAL_SBS_BREAK_PVD_LOCK
+#define __HAL_SYSCFG_BREAK_SRAM_ECC_LOCK   __HAL_SBS_BREAK_SRAM_ECC_LOCK
+
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE   __HAL_SBS_FASTMODEPLUS_ENABLE
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE  __HAL_SBS_FASTMODEPLUS_DISABLE
+
+#define __HAL_SYSCFG_GET_MEMORIES_ERASE_STATUS    __HAL_SBS_GET_MEMORIES_ERASE_STATUS
+#define __HAL_SYSCFG_CLEAR_MEMORIES_ERASE_STATUS  __HAL_SBS_CLEAR_MEMORIES_ERASE_STATUS
+
+#define IS_SYSCFG_FPU_INTERRUPT    IS_SBS_FPU_INTERRUPT
+#define IS_SYSCFG_BREAK_CONFIG     IS_SBS_BREAK_CONFIG
+#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE     IS_VREFBUF_VOLTAGE_SCALE
+#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE    IS_VREFBUF_HIGH_IMPEDANCE
+#define IS_SYSCFG_VREFBUF_TRIMMING  IS_VREFBUF_TRIMMING
+#define IS_SYSCFG_FASTMODEPLUS      IS_SBS_FASTMODEPLUS
+#define IS_SYSCFG_ITEMS_ATTRIBUTES  IS_SBS_ITEMS_ATTRIBUTES
+#define IS_SYSCFG_ATTRIBUTES        IS_SBS_ATTRIBUTES
+#define IS_SYSCFG_LOCK_ITEMS        IS_SBS_LOCK_ITEMS
+
+#define HAL_SYSCFG_VREFBUF_VoltageScalingConfig   HAL_VREFBUF_VoltageScalingConfig
+#define HAL_SYSCFG_VREFBUF_HighImpedanceConfig    HAL_VREFBUF_HighImpedanceConfig
+#define HAL_SYSCFG_VREFBUF_TrimmingConfig         HAL_VREFBUF_TrimmingConfig
+#define HAL_SYSCFG_EnableVREFBUF                  HAL_EnableVREFBUF
+#define HAL_SYSCFG_DisableVREFBUF                 HAL_DisableVREFBUF
+
+#define HAL_SYSCFG_EnableIOAnalogSwitchBooster    HAL_SBS_EnableIOAnalogSwitchBooster
+#define HAL_SYSCFG_DisableIOAnalogSwitchBooster   HAL_SBS_DisableIOAnalogSwitchBooster
+#define HAL_SYSCFG_ETHInterfaceSelect             HAL_SBS_ETHInterfaceSelect
+
+#define HAL_SYSCFG_Lock     HAL_SBS_Lock
+#define HAL_SYSCFG_GetLock  HAL_SBS_GetLock
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+#define HAL_SYSCFG_ConfigAttributes     HAL_SBS_ConfigAttributes
+#define HAL_SYSCFG_GetConfigAttributes  HAL_SBS_GetConfigAttributes
+#endif /* __ARM_FEATURE_CMSE */
+
+#endif /* STM32H5 */
+
+
 /**
   * @}
   */
@@ -636,14 +758,16 @@
 #define GPIO_AF10_OTG2_HS  GPIO_AF10_OTG2_FS
 #define GPIO_AF10_OTG1_FS  GPIO_AF10_OTG1_HS
 #define GPIO_AF12_OTG2_FS  GPIO_AF12_OTG1_FS
-#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */
+#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || \
+         STM32H757xx */
 #endif /* STM32H7 */
 
 #define GPIO_AF0_LPTIM                            GPIO_AF0_LPTIM1
 #define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
 #define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
 
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || \
+    defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5)
 #define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW
 #define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM
 #define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH
@@ -665,9 +789,9 @@
 
 #define GPIO_AF6_DFSDM                            GPIO_AF6_DFSDM1
 
-#if defined(STM32U5)
+#if defined(STM32U5) || defined(STM32H5)
 #define GPIO_AF0_RTC_50Hz                         GPIO_AF0_RTC_50HZ
-#endif /* STM32U5 */
+#endif /* STM32U5 || STM32H5 */
 #if defined(STM32U5)
 #define GPIO_AF0_S2DSTOP                          GPIO_AF0_SRDSTOP
 #define GPIO_AF11_LPGPIO                          GPIO_AF11_LPGPIO1
@@ -681,7 +805,25 @@
   */
 #if defined(STM32U5)
 #define GTZC_PERIPH_DCMI                      GTZC_PERIPH_DCMI_PSSI
+#define GTZC_PERIPH_LTDC                      GTZC_PERIPH_LTDCUSB
 #endif /* STM32U5 */
+#if defined(STM32H5)
+#define GTZC_PERIPH_DAC12                     GTZC_PERIPH_DAC1
+#define GTZC_PERIPH_ADC12                     GTZC_PERIPH_ADC
+#define GTZC_PERIPH_USBFS                     GTZC_PERIPH_USB
+#endif /* STM32H5 */
+#if defined(STM32H5) || defined(STM32U5)
+#define GTZC_MCPBB_NB_VCTR_REG_MAX            GTZC_MPCBB_NB_VCTR_REG_MAX
+#define GTZC_MCPBB_NB_LCK_VCTR_REG_MAX        GTZC_MPCBB_NB_LCK_VCTR_REG_MAX
+#define GTZC_MCPBB_SUPERBLOCK_UNLOCKED        GTZC_MPCBB_SUPERBLOCK_UNLOCKED
+#define GTZC_MCPBB_SUPERBLOCK_LOCKED          GTZC_MPCBB_SUPERBLOCK_LOCKED
+#define GTZC_MCPBB_BLOCK_NSEC                 GTZC_MPCBB_BLOCK_NSEC
+#define GTZC_MCPBB_BLOCK_SEC                  GTZC_MPCBB_BLOCK_SEC
+#define GTZC_MCPBB_BLOCK_NPRIV                GTZC_MPCBB_BLOCK_NPRIV
+#define GTZC_MCPBB_BLOCK_PRIV                 GTZC_MPCBB_BLOCK_PRIV
+#define GTZC_MCPBB_LOCK_OFF                   GTZC_MPCBB_LOCK_OFF
+#define GTZC_MCPBB_LOCK_ON                    GTZC_MPCBB_LOCK_ON
+#endif /* STM32H5 || STM32U5 */
 /**
   * @}
   */
@@ -862,7 +1004,8 @@
 #define I2C_NOSTRETCH_ENABLED                   I2C_NOSTRETCH_ENABLE
 #define I2C_ANALOGFILTER_ENABLED                I2C_ANALOGFILTER_ENABLE
 #define I2C_ANALOGFILTER_DISABLED               I2C_ANALOGFILTER_DISABLE
-#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || \
+    defined(STM32L1) || defined(STM32F7)
 #define HAL_I2C_STATE_MEM_BUSY_TX               HAL_I2C_STATE_BUSY_TX
 #define HAL_I2C_STATE_MEM_BUSY_RX               HAL_I2C_STATE_BUSY_RX
 #define HAL_I2C_STATE_MASTER_BUSY_TX            HAL_I2C_STATE_BUSY_TX
@@ -1000,7 +1143,7 @@
 #define OPAMP_PGACONNECT_VM0                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
 #define OPAMP_PGACONNECT_VM1                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
 
-#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4)
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) || defined(STM32U5)
 #define HAL_OPAMP_MSP_INIT_CB_ID       HAL_OPAMP_MSPINIT_CB_ID
 #define HAL_OPAMP_MSP_DEINIT_CB_ID     HAL_OPAMP_MSPDEINIT_CB_ID
 #endif
@@ -1084,8 +1227,8 @@
 #define RTC_TAMPER1_2_3_INTERRUPT       RTC_ALL_TAMPER_INTERRUPT
 
 #define RTC_TIMESTAMPPIN_PC13  RTC_TIMESTAMPPIN_DEFAULT
-#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
-#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PA0   RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8   RTC_TIMESTAMPPIN_POS1
 #define RTC_TIMESTAMPPIN_PC1   RTC_TIMESTAMPPIN_POS2
 
 #define RTC_OUTPUT_REMAP_PC13  RTC_OUTPUT_REMAP_NONE
@@ -1096,15 +1239,42 @@
 #define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1
 #define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
 
+#if defined(STM32H5)
+#define TAMP_SECRETDEVICE_ERASE_NONE        TAMP_DEVICESECRETS_ERASE_NONE
+#define TAMP_SECRETDEVICE_ERASE_BKP_SRAM    TAMP_DEVICESECRETS_ERASE_BKPSRAM
+#endif /* STM32H5 */
+
+#if defined(STM32WBA)
+#define TAMP_SECRETDEVICE_ERASE_NONE            TAMP_DEVICESECRETS_ERASE_NONE
+#define TAMP_SECRETDEVICE_ERASE_SRAM2           TAMP_DEVICESECRETS_ERASE_SRAM2
+#define TAMP_SECRETDEVICE_ERASE_RHUK            TAMP_DEVICESECRETS_ERASE_RHUK
+#define TAMP_SECRETDEVICE_ERASE_ICACHE          TAMP_DEVICESECRETS_ERASE_ICACHE
+#define TAMP_SECRETDEVICE_ERASE_SAES_AES_HASH   TAMP_DEVICESECRETS_ERASE_SAES_AES_HASH
+#define TAMP_SECRETDEVICE_ERASE_PKA_SRAM        TAMP_DEVICESECRETS_ERASE_PKA_SRAM
+#define TAMP_SECRETDEVICE_ERASE_ALL             TAMP_DEVICESECRETS_ERASE_ALL
+#endif /* STM32WBA */
+
+#if defined(STM32H5) || defined(STM32WBA)
+#define TAMP_SECRETDEVICE_ERASE_DISABLE     TAMP_DEVICESECRETS_ERASE_NONE
+#define TAMP_SECRETDEVICE_ERASE_ENABLE      TAMP_SECRETDEVICE_ERASE_ALL
+#endif /* STM32H5 || STM32WBA */
+
+#if defined(STM32F7)
+#define RTC_TAMPCR_TAMPXE          RTC_TAMPER_ENABLE_BITS_MASK
+#define RTC_TAMPCR_TAMPXIE         RTC_TAMPER_IT_ENABLE_BITS_MASK
+#endif /* STM32F7 */
+
 #if defined(STM32H7)
 #define RTC_TAMPCR_TAMPXE          RTC_TAMPER_X
 #define RTC_TAMPCR_TAMPXIE         RTC_TAMPER_X_INTERRUPT
+#endif /* STM32H7 */
 
+#if defined(STM32F7) || defined(STM32H7) || defined(STM32L0)
 #define RTC_TAMPER1_INTERRUPT      RTC_IT_TAMP1
 #define RTC_TAMPER2_INTERRUPT      RTC_IT_TAMP2
 #define RTC_TAMPER3_INTERRUPT      RTC_IT_TAMP3
-#define RTC_ALL_TAMPER_INTERRUPT   RTC_IT_TAMPALL
-#endif /* STM32H7 */
+#define RTC_ALL_TAMPER_INTERRUPT   RTC_IT_TAMP
+#endif /* STM32F7 || STM32H7 || STM32L0 */
 
 /**
   * @}
@@ -1384,30 +1554,40 @@
 #define ETH_MMCRFAECR          0x00000198U
 #define ETH_MMCRGUFCR          0x000001C4U
 
-#define ETH_MAC_TXFIFO_FULL                             0x02000000U  /* Tx FIFO full */
-#define ETH_MAC_TXFIFONOT_EMPTY                         0x01000000U  /* Tx FIFO not empty */
-#define ETH_MAC_TXFIFO_WRITE_ACTIVE                     0x00400000U  /* Tx FIFO write active */
-#define ETH_MAC_TXFIFO_IDLE                             0x00000000U  /* Tx FIFO read status: Idle */
-#define ETH_MAC_TXFIFO_READ                             0x00100000U  /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
-#define ETH_MAC_TXFIFO_WAITING                          0x00200000U  /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
-#define ETH_MAC_TXFIFO_WRITING                          0x00300000U  /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
-#define ETH_MAC_TRANSMISSION_PAUSE                      0x00080000U  /* MAC transmitter in pause */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE            0x00000000U  /* MAC transmit frame controller: Idle */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING         0x00020000U  /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF   0x00040000U  /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING    0x00060000U  /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_TXFIFO_FULL                           0x02000000U  /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY                       0x01000000U  /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE                   0x00400000U  /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE                           0x00000000U  /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ                           0x00100000U  /* Tx FIFO read status: Read (transferring data to 
+                                                                      the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING                        0x00200000U  /* Tx FIFO read status: Waiting for TxStatus from 
+                                                                      MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING                        0x00300000U  /* Tx FIFO read status: Writing the received TxStatus
+                                                                      or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE                    0x00080000U  /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE          0x00000000U  /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING       0x00020000U  /* MAC transmit frame controller: Waiting for Status 
+                                                                   of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U  /* MAC transmit frame controller: Generating and 
+                                                             transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING  0x00060000U  /* MAC transmit frame controller: Transferring input 
+                                                                      frame for transmission */
 #define ETH_MAC_MII_TRANSMIT_ACTIVE           0x00010000U  /* MAC MII transmit engine active */
 #define ETH_MAC_RXFIFO_EMPTY                  0x00000000U  /* Rx FIFO fill level: empty */
-#define ETH_MAC_RXFIFO_BELOW_THRESHOLD        0x00000100U  /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
-#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD        0x00000200U  /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD        0x00000100U  /* Rx FIFO fill level: fill-level below flow-control 
+                                                              de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD        0x00000200U  /* Rx FIFO fill level: fill-level above flow-control 
+                                                              activate threshold */
 #define ETH_MAC_RXFIFO_FULL                   0x00000300U  /* Rx FIFO fill level: full */
 #if defined(STM32F1)
 #else
 #define ETH_MAC_READCONTROLLER_IDLE           0x00000000U  /* Rx FIFO read controller IDLE state */
 #define ETH_MAC_READCONTROLLER_READING_DATA   0x00000020U  /* Rx FIFO read controller Reading frame data */
-#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U  /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U  /* Rx FIFO read controller Reading frame status 
+                                                             (or time-stamp) */
 #endif
-#define ETH_MAC_READCONTROLLER_FLUSHING       0x00000060U  /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_READCONTROLLER_FLUSHING       0x00000060U  /* Rx FIFO read controller Flushing the frame data and 
+                                                              status */
 #define ETH_MAC_RXFIFO_WRITE_ACTIVE           0x00000010U  /* Rx FIFO write controller active */
 #define ETH_MAC_SMALL_FIFO_NOTACTIVE          0x00000000U  /* MAC small FIFO read / write controllers not active */
 #define ETH_MAC_SMALL_FIFO_READ_ACTIVE        0x00000002U  /* MAC small FIFO read controller active */
@@ -1578,7 +1758,8 @@
 #define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
 #define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
 #define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\
-                                              )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+                                              )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : \
+                                             HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
 #define HAL_VREFINT_OutputSelect  HAL_SYSCFG_VREFINT_OutputSelect
 #define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
 #if defined(STM32L0)
@@ -1587,8 +1768,10 @@
 #endif
 #define HAL_ADC_EnableBuffer_Cmd(cmd)  (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
 #define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\
-                                              )==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
-#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
+                                              )==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : \
+                                             HAL_ADCEx_DisableVREFINTTempSensor())
+#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || \
+    defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
 #define HAL_EnableSRDomainDBGStopMode      HAL_EnableDomain3DBGStopMode
 #define HAL_DisableSRDomainDBGStopMode     HAL_DisableDomain3DBGStopMode
 #define HAL_EnableSRDomainDBGStandbyMode   HAL_EnableDomain3DBGStandbyMode
@@ -1622,16 +1805,21 @@
 #define HAL_FMPI2CEx_AnalogFilter_Config      HAL_FMPI2CEx_ConfigAnalogFilter
 #define HAL_FMPI2CEx_DigitalFilter_Config     HAL_FMPI2CEx_ConfigDigitalFilter
 
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\
-                                                                 )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) ((cmd == ENABLE)? \
+                                                                HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): \
+                                                                HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
 
-#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || \
+    defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || \
+    defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
 #define HAL_I2C_Master_Sequential_Transmit_IT  HAL_I2C_Master_Seq_Transmit_IT
 #define HAL_I2C_Master_Sequential_Receive_IT   HAL_I2C_Master_Seq_Receive_IT
 #define HAL_I2C_Slave_Sequential_Transmit_IT   HAL_I2C_Slave_Seq_Transmit_IT
 #define HAL_I2C_Slave_Sequential_Receive_IT    HAL_I2C_Slave_Seq_Receive_IT
-#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
-#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1)
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 ||
+          STM32L4 || STM32L5 || STM32G4 || STM32L1 */
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || \
+    defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1)
 #define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
 #define HAL_I2C_Master_Sequential_Receive_DMA  HAL_I2C_Master_Seq_Receive_DMA
 #define HAL_I2C_Slave_Sequential_Transmit_DMA  HAL_I2C_Slave_Seq_Transmit_DMA
@@ -1756,6 +1944,17 @@
 #define PWR_SRAM5_PAGE13_STOP_RETENTION               PWR_SRAM5_PAGE13_STOP
 #define PWR_SRAM5_FULL_STOP_RETENTION                 PWR_SRAM5_FULL_STOP
 
+#define PWR_SRAM6_PAGE1_STOP_RETENTION                PWR_SRAM6_PAGE1_STOP
+#define PWR_SRAM6_PAGE2_STOP_RETENTION                PWR_SRAM6_PAGE2_STOP
+#define PWR_SRAM6_PAGE3_STOP_RETENTION                PWR_SRAM6_PAGE3_STOP
+#define PWR_SRAM6_PAGE4_STOP_RETENTION                PWR_SRAM6_PAGE4_STOP
+#define PWR_SRAM6_PAGE5_STOP_RETENTION                PWR_SRAM6_PAGE5_STOP
+#define PWR_SRAM6_PAGE6_STOP_RETENTION                PWR_SRAM6_PAGE6_STOP
+#define PWR_SRAM6_PAGE7_STOP_RETENTION                PWR_SRAM6_PAGE7_STOP
+#define PWR_SRAM6_PAGE8_STOP_RETENTION                PWR_SRAM6_PAGE8_STOP
+#define PWR_SRAM6_FULL_STOP_RETENTION                 PWR_SRAM6_FULL_STOP
+
+
 #define PWR_ICACHE_FULL_STOP_RETENTION                PWR_ICACHE_FULL_STOP
 #define PWR_DCACHE1_FULL_STOP_RETENTION               PWR_DCACHE1_FULL_STOP
 #define PWR_DCACHE2_FULL_STOP_RETENTION               PWR_DCACHE2_FULL_STOP
@@ -1764,6 +1963,8 @@
 #define PWR_PKA32RAM_FULL_STOP_RETENTION              PWR_PKA32RAM_FULL_STOP
 #define PWR_GRAPHICPRAM_FULL_STOP_RETENTION           PWR_GRAPHICPRAM_FULL_STOP
 #define PWR_DSIRAM_FULL_STOP_RETENTION                PWR_DSIRAM_FULL_STOP
+#define PWR_JPEGRAM_FULL_STOP_RETENTION               PWR_JPEGRAM_FULL_STOP
+
 
 #define PWR_SRAM2_PAGE1_STANDBY_RETENTION             PWR_SRAM2_PAGE1_STANDBY
 #define PWR_SRAM2_PAGE2_STANDBY_RETENTION             PWR_SRAM2_PAGE2_STANDBY
@@ -1774,6 +1975,7 @@
 #define PWR_SRAM3_FULL_RUN_RETENTION                  PWR_SRAM3_FULL_RUN
 #define PWR_SRAM4_FULL_RUN_RETENTION                  PWR_SRAM4_FULL_RUN
 #define PWR_SRAM5_FULL_RUN_RETENTION                  PWR_SRAM5_FULL_RUN
+#define PWR_SRAM6_FULL_RUN_RETENTION                  PWR_SRAM6_FULL_RUN
 
 #define PWR_ALL_RAM_RUN_RETENTION_MASK                PWR_ALL_RAM_RUN_MASK
 #endif
@@ -1782,6 +1984,20 @@
   * @}
  */
 
+/** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32H5) || defined(STM32WBA)
+#define HAL_RTCEx_SetBoothardwareKey            HAL_RTCEx_LockBootHardwareKey
+#define HAL_RTCEx_BKUPBlock_Enable              HAL_RTCEx_BKUPBlock
+#define HAL_RTCEx_BKUPBlock_Disable             HAL_RTCEx_BKUPUnblock
+#define HAL_RTCEx_Erase_SecretDev_Conf          HAL_RTCEx_ConfigEraseDeviceSecrets
+#endif /* STM32H5 || STM32WBA */
+
+/**
+  * @}
+  */
+
 /** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
   * @{
   */
@@ -1807,7 +2023,8 @@
 #define HAL_TIM_DMAError                                TIM_DMAError
 #define HAL_TIM_DMACaptureCplt                          TIM_DMACaptureCplt
 #define HAL_TIMEx_DMACommutationCplt                    TIMEx_DMACommutationCplt
-#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4)
+#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || \
+    defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4)
 #define HAL_TIM_SlaveConfigSynchronization              HAL_TIM_SlaveConfigSynchro
 #define HAL_TIM_SlaveConfigSynchronization_IT           HAL_TIM_SlaveConfigSynchro_IT
 #define HAL_TIMEx_CommutationCallback                   HAL_TIMEx_CommutCallback
@@ -2064,7 +2281,8 @@
 #define COMP_STOP                                        __HAL_COMP_DISABLE
 #define COMP_LOCK                                        __HAL_COMP_LOCK
 
-#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || \
+    defined(STM32F334x8) || defined(STM32F328xx)
 #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
                                                           ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
                                                           __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
@@ -2236,8 +2454,10 @@
 /** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
   * @{
   */
-#define HAL_COMP_Start_IT       HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
-#define HAL_COMP_Stop_IT        HAL_COMP_Stop  /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Start_IT       HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is 
+                                                  done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT        HAL_COMP_Stop  /* Function considered as legacy as EXTI event or IT configuration is 
+                                                  done into HAL_COMP_Init() */
 /**
   * @}
   */
@@ -2396,7 +2616,9 @@
 #define __HAL_PWR_INTERNALWAKEUP_ENABLE                          HAL_PWREx_EnableInternalWakeUpLine
 #define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE                    HAL_PWREx_DisablePullUpPullDownConfig
 #define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE                     HAL_PWREx_EnablePullUpPullDownConfig
-#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER()                  do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER()                  do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \
+                                                                      __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \
+                                                                    } while(0)
 #define __HAL_PWR_PVD_EXTI_EVENT_DISABLE                         __HAL_PWR_PVD_EXTI_DISABLE_EVENT
 #define __HAL_PWR_PVD_EXTI_EVENT_ENABLE                          __HAL_PWR_PVD_EXTI_ENABLE_EVENT
 #define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE                __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
@@ -2405,8 +2627,12 @@
 #define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE                  __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
 #define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER              __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
 #define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER               __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PWR_PVM_DISABLE()                                  do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
-#define __HAL_PWR_PVM_ENABLE()                                   do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_PVM_DISABLE()                                  do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2(); \
+                                                                      HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); \
+                                                                    } while(0)
+#define __HAL_PWR_PVM_ENABLE()                                   do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2(); \
+                                                                      HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); \
+                                                                    } while(0)
 #define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE                  HAL_PWREx_DisableSRAM2ContentRetention
 #define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE                   HAL_PWREx_EnableSRAM2ContentRetention
 #define __HAL_PWR_VDDIO2_DISABLE                                 HAL_PWREx_DisableVddIO2
@@ -2442,8 +2668,8 @@
 #define RCC_StopWakeUpClock_HSI     RCC_STOP_WAKEUPCLOCK_HSI
 
 #define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\
-                                         )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? \
+                                        HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
 
 #define __ADC_CLK_DISABLE          __HAL_RCC_ADC_CLK_DISABLE
 #define __ADC_CLK_ENABLE           __HAL_RCC_ADC_CLK_ENABLE
@@ -2947,6 +3173,11 @@
 
 #define  __HAL_RCC_WWDG_IS_CLK_ENABLED    __HAL_RCC_WWDG1_IS_CLK_ENABLED
 #define  __HAL_RCC_WWDG_IS_CLK_DISABLED  __HAL_RCC_WWDG1_IS_CLK_DISABLED
+#define  RCC_SPI4CLKSOURCE_D2PCLK1       RCC_SPI4CLKSOURCE_D2PCLK2
+#define  RCC_SPI5CLKSOURCE_D2PCLK1       RCC_SPI5CLKSOURCE_D2PCLK2
+#define  RCC_SPI45CLKSOURCE_D2PCLK1      RCC_SPI45CLKSOURCE_D2PCLK2
+#define  RCC_SPI45CLKSOURCE_CDPCLK1      RCC_SPI45CLKSOURCE_CDPCLK2
+#define  RCC_SPI45CLKSOURCE_PCLK1        RCC_SPI45CLKSOURCE_PCLK2
 #endif
 
 #define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
@@ -3411,7 +3642,8 @@
 #define RCC_MCOSOURCE_PLLCLK_NODIV  RCC_MCO1SOURCE_PLLCLK
 #define RCC_MCOSOURCE_PLLCLK_DIV2   RCC_MCO1SOURCE_PLLCLK_DIV2
 
-#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL)
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || \
+      defined(STM32WL) || defined(STM32C0)
 #define RCC_RTCCLKSOURCE_NO_CLK     RCC_RTCCLKSOURCE_NONE
 #else
 #define RCC_RTCCLKSOURCE_NONE       RCC_RTCCLKSOURCE_NO_CLK
@@ -3513,6 +3745,7 @@
 #define __HAL_RCC_GET_DFSDM_SOURCE  __HAL_RCC_GET_DFSDM1_SOURCE
 #define RCC_DFSDM1CLKSOURCE_PCLK    RCC_DFSDM1CLKSOURCE_PCLK2
 #define RCC_SWPMI1CLKSOURCE_PCLK    RCC_SWPMI1CLKSOURCE_PCLK1
+
 #define RCC_LPTIM1CLKSOURCE_PCLK    RCC_LPTIM1CLKSOURCE_PCLK1
 #define RCC_LPTIM2CLKSOURCE_PCLK    RCC_LPTIM2CLKSOURCE_PCLK1
 
@@ -3524,8 +3757,8 @@
 #define RCC_DFSDM2CLKSOURCE_APB2            RCC_DFSDM2CLKSOURCE_PCLK2
 #define RCC_FMPI2C1CLKSOURCE_APB            RCC_FMPI2C1CLKSOURCE_PCLK1
 #if defined(STM32U5)
-#define MSIKPLLModeSEL  RCC_MSIKPLL_MODE_SEL
-#define MSISPLLModeSEL  RCC_MSISPLL_MODE_SEL
+#define MSIKPLLModeSEL                        RCC_MSIKPLL_MODE_SEL
+#define MSISPLLModeSEL                        RCC_MSISPLL_MODE_SEL
 #define __HAL_RCC_AHB21_CLK_DISABLE           __HAL_RCC_AHB2_1_CLK_DISABLE
 #define __HAL_RCC_AHB22_CLK_DISABLE           __HAL_RCC_AHB2_2_CLK_DISABLE
 #define __HAL_RCC_AHB1_CLK_Disable_Clear      __HAL_RCC_AHB1_CLK_ENABLE
@@ -3541,16 +3774,106 @@
 #define RCC_CLK48CLKSOURCE_PLL2               RCC_ICLK_CLKSOURCE_PLL2
 #define RCC_CLK48CLKSOURCE_PLL1               RCC_ICLK_CLKSOURCE_PLL1
 #define RCC_CLK48CLKSOURCE_MSIK               RCC_ICLK_CLKSOURCE_MSIK
-#define __HAL_RCC_ADC1_CLK_ENABLE            __HAL_RCC_ADC12_CLK_ENABLE
-#define __HAL_RCC_ADC1_CLK_DISABLE          __HAL_RCC_ADC12_CLK_DISABLE
-#define __HAL_RCC_ADC1_IS_CLK_ENABLED       __HAL_RCC_ADC12_IS_CLK_ENABLED
-#define __HAL_RCC_ADC1_IS_CLK_DISABLED      __HAL_RCC_ADC12_IS_CLK_DISABLED
-#define __HAL_RCC_ADC1_FORCE_RESET          __HAL_RCC_ADC12_FORCE_RESET
-#define __HAL_RCC_ADC1_RELEASE_RESET        __HAL_RCC_ADC12_RELEASE_RESET
-#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE     __HAL_RCC_ADC12_CLK_SLEEP_ENABLE
-#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE    __HAL_RCC_ADC12_CLK_SLEEP_DISABLE
-#define __HAL_RCC_GET_CLK48_SOURCE          __HAL_RCC_GET_ICLK_SOURCE
-#endif
+#define __HAL_RCC_ADC1_CLK_ENABLE             __HAL_RCC_ADC12_CLK_ENABLE
+#define __HAL_RCC_ADC1_CLK_DISABLE            __HAL_RCC_ADC12_CLK_DISABLE
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED         __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED        __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __HAL_RCC_ADC1_FORCE_RESET            __HAL_RCC_ADC12_FORCE_RESET
+#define __HAL_RCC_ADC1_RELEASE_RESET          __HAL_RCC_ADC12_RELEASE_RESET
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE       __HAL_RCC_ADC12_CLK_SLEEP_ENABLE
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE      __HAL_RCC_ADC12_CLK_SLEEP_DISABLE
+#define __HAL_RCC_GET_CLK48_SOURCE            __HAL_RCC_GET_ICLK_SOURCE
+#define __HAL_RCC_PLLFRACN_ENABLE             __HAL_RCC_PLL_FRACN_ENABLE
+#define __HAL_RCC_PLLFRACN_DISABLE            __HAL_RCC_PLL_FRACN_DISABLE
+#define __HAL_RCC_PLLFRACN_CONFIG             __HAL_RCC_PLL_FRACN_CONFIG
+#define IS_RCC_PLLFRACN_VALUE                 IS_RCC_PLL_FRACN_VALUE
+#endif /* STM32U5 */
+
+#if defined(STM32H5)
+#define __HAL_RCC_PLLFRACN_ENABLE       __HAL_RCC_PLL_FRACN_ENABLE
+#define __HAL_RCC_PLLFRACN_DISABLE      __HAL_RCC_PLL_FRACN_DISABLE
+#define __HAL_RCC_PLLFRACN_CONFIG       __HAL_RCC_PLL_FRACN_CONFIG
+#define IS_RCC_PLLFRACN_VALUE           IS_RCC_PLL_FRACN_VALUE
+
+#define RCC_PLLSOURCE_NONE              RCC_PLL1_SOURCE_NONE
+#define RCC_PLLSOURCE_HSI               RCC_PLL1_SOURCE_HSI
+#define RCC_PLLSOURCE_CSI               RCC_PLL1_SOURCE_CSI
+#define RCC_PLLSOURCE_HSE               RCC_PLL1_SOURCE_HSE
+#define RCC_PLLVCIRANGE_0               RCC_PLL1_VCIRANGE_0
+#define RCC_PLLVCIRANGE_1               RCC_PLL1_VCIRANGE_1
+#define RCC_PLLVCIRANGE_2               RCC_PLL1_VCIRANGE_2
+#define RCC_PLLVCIRANGE_3               RCC_PLL1_VCIRANGE_3
+#define RCC_PLL1VCOWIDE                 RCC_PLL1_VCORANGE_WIDE
+#define RCC_PLL1VCOMEDIUM               RCC_PLL1_VCORANGE_MEDIUM
+
+#define IS_RCC_PLLSOURCE                IS_RCC_PLL1_SOURCE
+#define IS_RCC_PLLRGE_VALUE             IS_RCC_PLL1_VCIRGE_VALUE
+#define IS_RCC_PLLVCORGE_VALUE          IS_RCC_PLL1_VCORGE_VALUE
+#define IS_RCC_PLLCLOCKOUT_VALUE        IS_RCC_PLL1_CLOCKOUT_VALUE
+#define IS_RCC_PLL_FRACN_VALUE          IS_RCC_PLL1_FRACN_VALUE
+#define IS_RCC_PLLM_VALUE               IS_RCC_PLL1_DIVM_VALUE
+#define IS_RCC_PLLN_VALUE               IS_RCC_PLL1_MULN_VALUE
+#define IS_RCC_PLLP_VALUE               IS_RCC_PLL1_DIVP_VALUE
+#define IS_RCC_PLLQ_VALUE               IS_RCC_PLL1_DIVQ_VALUE
+#define IS_RCC_PLLR_VALUE               IS_RCC_PLL1_DIVR_VALUE
+
+#define __HAL_RCC_PLL_ENABLE            __HAL_RCC_PLL1_ENABLE
+#define __HAL_RCC_PLL_DISABLE           __HAL_RCC_PLL1_DISABLE
+#define __HAL_RCC_PLL_FRACN_ENABLE      __HAL_RCC_PLL1_FRACN_ENABLE
+#define __HAL_RCC_PLL_FRACN_DISABLE     __HAL_RCC_PLL1_FRACN_DISABLE
+#define __HAL_RCC_PLL_CONFIG            __HAL_RCC_PLL1_CONFIG
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG  __HAL_RCC_PLL1_PLLSOURCE_CONFIG
+#define __HAL_RCC_PLL_DIVM_CONFIG       __HAL_RCC_PLL1_DIVM_CONFIG
+#define __HAL_RCC_PLL_FRACN_CONFIG      __HAL_RCC_PLL1_FRACN_CONFIG
+#define __HAL_RCC_PLL_VCIRANGE          __HAL_RCC_PLL1_VCIRANGE
+#define __HAL_RCC_PLL_VCORANGE          __HAL_RCC_PLL1_VCORANGE
+#define __HAL_RCC_GET_PLL_OSCSOURCE     __HAL_RCC_GET_PLL1_OSCSOURCE
+#define __HAL_RCC_PLLCLKOUT_ENABLE      __HAL_RCC_PLL1_CLKOUT_ENABLE
+#define __HAL_RCC_PLLCLKOUT_DISABLE     __HAL_RCC_PLL1_CLKOUT_DISABLE
+#define __HAL_RCC_GET_PLLCLKOUT_CONFIG  __HAL_RCC_GET_PLL1_CLKOUT_CONFIG
+
+#define __HAL_RCC_PLL2FRACN_ENABLE      __HAL_RCC_PLL2_FRACN_ENABLE
+#define __HAL_RCC_PLL2FRACN_DISABLE     __HAL_RCC_PLL2_FRACN_DISABLE
+#define __HAL_RCC_PLL2CLKOUT_ENABLE     __HAL_RCC_PLL2_CLKOUT_ENABLE
+#define __HAL_RCC_PLL2CLKOUT_DISABLE    __HAL_RCC_PLL2_CLKOUT_DISABLE
+#define __HAL_RCC_PLL2FRACN_CONFIG      __HAL_RCC_PLL2_FRACN_CONFIG
+#define __HAL_RCC_GET_PLL2CLKOUT_CONFIG __HAL_RCC_GET_PLL2_CLKOUT_CONFIG
+
+#define __HAL_RCC_PLL3FRACN_ENABLE      __HAL_RCC_PLL3_FRACN_ENABLE
+#define __HAL_RCC_PLL3FRACN_DISABLE     __HAL_RCC_PLL3_FRACN_DISABLE
+#define __HAL_RCC_PLL3CLKOUT_ENABLE     __HAL_RCC_PLL3_CLKOUT_ENABLE
+#define __HAL_RCC_PLL3CLKOUT_DISABLE    __HAL_RCC_PLL3_CLKOUT_DISABLE
+#define __HAL_RCC_PLL3FRACN_CONFIG      __HAL_RCC_PLL3_FRACN_CONFIG
+#define __HAL_RCC_GET_PLL3CLKOUT_CONFIG __HAL_RCC_GET_PLL3_CLKOUT_CONFIG
+
+#define RCC_PLL2VCIRANGE_0              RCC_PLL2_VCIRANGE_0
+#define RCC_PLL2VCIRANGE_1              RCC_PLL2_VCIRANGE_1
+#define RCC_PLL2VCIRANGE_2              RCC_PLL2_VCIRANGE_2
+#define RCC_PLL2VCIRANGE_3              RCC_PLL2_VCIRANGE_3
+
+#define RCC_PLL2VCOWIDE                 RCC_PLL2_VCORANGE_WIDE
+#define RCC_PLL2VCOMEDIUM               RCC_PLL2_VCORANGE_MEDIUM
+
+#define RCC_PLL2SOURCE_NONE             RCC_PLL2_SOURCE_NONE
+#define RCC_PLL2SOURCE_HSI              RCC_PLL2_SOURCE_HSI
+#define RCC_PLL2SOURCE_CSI              RCC_PLL2_SOURCE_CSI
+#define RCC_PLL2SOURCE_HSE              RCC_PLL2_SOURCE_HSE
+
+#define RCC_PLL3VCIRANGE_0              RCC_PLL3_VCIRANGE_0
+#define RCC_PLL3VCIRANGE_1              RCC_PLL3_VCIRANGE_1
+#define RCC_PLL3VCIRANGE_2              RCC_PLL3_VCIRANGE_2
+#define RCC_PLL3VCIRANGE_3              RCC_PLL3_VCIRANGE_3
+
+#define RCC_PLL3VCOWIDE                 RCC_PLL3_VCORANGE_WIDE
+#define RCC_PLL3VCOMEDIUM               RCC_PLL3_VCORANGE_MEDIUM
+
+#define RCC_PLL3SOURCE_NONE             RCC_PLL3_SOURCE_NONE
+#define RCC_PLL3SOURCE_HSI              RCC_PLL3_SOURCE_HSI
+#define RCC_PLL3SOURCE_CSI              RCC_PLL3_SOURCE_CSI
+#define RCC_PLL3SOURCE_HSE              RCC_PLL3_SOURCE_HSE
+
+
+#endif /* STM32H5 */
 
 /**
   * @}
@@ -3568,7 +3891,9 @@
 /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
   * @{
   */
-#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5)
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || \
+    defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \
+    defined (STM32WBA) || defined (STM32H5) || defined (STM32C0)
 #else
 #define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
 #endif
@@ -3603,6 +3928,12 @@
                                                         __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
 #endif   /* STM32F1 */
 
+#if defined (STM32F0) || defined (STM32F2) || defined (STM32F3) || defined (STM32F4) || defined (STM32F7) || \
+    defined (STM32H7) || \
+    defined (STM32L0) || defined (STM32L1)
+#define __HAL_RTC_TAMPER_GET_IT                   __HAL_RTC_TAMPER_GET_FLAG
+#endif
+
 #define IS_ALARM                                  IS_RTC_ALARM
 #define IS_ALARM_MASK                             IS_RTC_ALARM_MASK
 #define IS_TAMPER                                 IS_RTC_TAMPER
@@ -3621,6 +3952,11 @@
 #define __RTC_WRITEPROTECTION_ENABLE  __HAL_RTC_WRITEPROTECTION_ENABLE
 #define __RTC_WRITEPROTECTION_DISABLE  __HAL_RTC_WRITEPROTECTION_DISABLE
 
+#if defined (STM32H5)
+#define __HAL_RCC_RTCAPB_CLK_ENABLE   __HAL_RCC_RTC_CLK_ENABLE
+#define __HAL_RCC_RTCAPB_CLK_DISABLE  __HAL_RCC_RTC_CLK_DISABLE
+#endif   /* STM32H5 */
+
 /**
   * @}
   */
@@ -3632,7 +3968,7 @@
 #define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
 #define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
 
-#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32F7) && !defined(STM32L1)
+#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1)
 #define eMMC_HIGH_VOLTAGE_RANGE     EMMC_HIGH_VOLTAGE_RANGE
 #define eMMC_DUAL_VOLTAGE_RANGE     EMMC_DUAL_VOLTAGE_RANGE
 #define eMMC_LOW_VOLTAGE_RANGE      EMMC_LOW_VOLTAGE_RANGE
@@ -3969,6 +4305,16 @@
   * @}
   */
 
+/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32F7)
+#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE
+#endif /* STM32F7 */
+/**
+  * @}
+  */
+
 /** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
   * @{
   */
diff --git a/Inc/stm32l4xx_hal_adc.h b/Inc/stm32l4xx_hal_adc.h
index 84f0e16..acef4b2 100644
--- a/Inc/stm32l4xx_hal_adc.h
+++ b/Inc/stm32l4xx_hal_adc.h
@@ -60,9 +60,10 @@
   uint32_t OversamplingStopReset;         /*!< Selects the regular oversampling mode.
                                                The oversampling is either temporary stopped or reset upon an injected
                                                sequence interruption.
-                                               If oversampling is enabled on both regular and injected groups, this parameter
-                                               is discarded and forced to setting "ADC_REGOVERSAMPLING_RESUMED_MODE"
-                                               (the oversampling buffer is zeroed during injection sequence).
+                                               If oversampling is enabled on both regular and injected groups, this
+                                               parameter is discarded and forced to setting
+                                               "ADC_REGOVERSAMPLING_RESUMED_MODE" (the oversampling buffer is zeroed
+                                               during injection sequence).
                                                This parameter can be a value of @ref ADC_HAL_EC_OVS_SCOPE_REG */
 
 } ADC_OversamplingTypeDef;
@@ -77,23 +78,31 @@
   * @note   The setting of these parameters by function HAL_ADC_Init() is conditioned to ADC state.
   *         ADC state can be either:
   *          - For all parameters: ADC disabled
-  *          - For all parameters except 'LowPowerAutoWait', 'DMAContinuousRequests' and 'Oversampling': ADC enabled without conversion on going on group regular.
-  *          - For parameters 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going on groups regular and injected.
+  *          - For all parameters except 'LowPowerAutoWait', 'DMAContinuousRequests' and 'Oversampling': ADC enabled
+  *            without conversion on going on group regular.
+  *          - For parameters 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going
+  *            on groups regular and injected.
   *         If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
-  *         without error reporting (as it can be the expected behavior in case of intended action to update another parameter
-  *         (which fulfills the ADC state condition) on the fly).
+  *         without error reporting (as it can be the expected behavior in case of intended action to update another
+  *         parameter (which fulfills the ADC state condition) on the fly).
   */
 typedef struct
 {
-  uint32_t ClockPrescaler;        /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from system clock or PLL (Refer to reference manual for list of clocks available)) and clock prescaler.
+  uint32_t ClockPrescaler;        /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous
+                                       clock derived from system clock or PLL (Refer to reference manual for list of
+                                       clocks available)) and clock prescaler.
                                        This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE.
                                        Note: The ADC clock configuration is common to all ADC instances.
-                                       Note: In case of usage of channels on injected group, ADC frequency should be lower than AHB clock frequency /4 for resolution 12 or 10 bits,
-                                             AHB clock frequency /3 for resolution 8 bits, AHB clock frequency /2 for resolution 6 bits.
-                                       Note: In case of synchronous clock mode based on HCLK/1, the configuration must be enabled only
-                                             if the system clock has a 50% duty clock cycle (APB prescaler configured inside RCC
-                                             must be bypassed and PCLK clock must have 50% duty cycle). Refer to reference manual for details.
-                                       Note: In case of usage of asynchronous clock, the selected clock must be preliminarily enabled at RCC top level.
+                                       Note: In case of usage of channels on injected group, ADC frequency should be
+                                             lower than AHB clock frequency /4 for resolution 12 or 10 bits,
+                                                        AHB clock frequency /3 for resolution 8 bits,
+                                                        AHB clock frequency /2 for resolution 6 bits.
+                                       Note: In case of synchronous clock mode based on HCLK/1, the configuration must
+                                             be enabled only if the system clock has a 50% duty clock cycle (APB
+                                             prescaler configured inside RCC  must be bypassed and PCLK clock must have
+                                             50% duty cycle). Refer to reference manual for details.
+                                       Note: In case of usage of asynchronous clock, the selected clock must be
+                                             preliminarily enabled at RCC top level.
                                        Note: This parameter can be modified only if all ADC instances are disabled. */
 
   uint32_t Resolution;            /*!< Configure the ADC resolution.
@@ -104,84 +113,131 @@
                                        This parameter can be a value of @ref ADC_HAL_EC_DATA_ALIGN */
 
   uint32_t ScanConvMode;          /*!< Configure the sequencer of ADC groups regular and injected.
-                                       This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
-                                       If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
-                                                    Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
-                                       If enabled:  Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion' or 'InjectedNbrOfConversion' and rank of each channel in sequencer).
-                                                    Scan direction is upward: from rank 1 to rank 'n'.
+                                       This parameter can be associated to parameter 'DiscontinuousConvMode' to have
+                                       main sequence subdivided in successive parts.
+                                       If disabled: Conversion is performed in single mode (one channel converted, the
+                                                    one defined in rank 1). Parameters 'NbrOfConversion' and
+                                                    'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+                                       If enabled:  Conversions are performed in sequence mode (multiple ranks defined
+                                                    by 'NbrOfConversion' or 'InjectedNbrOfConversion' and rank of each
+                                                    channel in sequencer). Scan direction is upward: from rank 1 to
+                                                    rank 'n'.
                                        This parameter can be a value of @ref ADC_Scan_mode */
 
-  uint32_t EOCSelection;          /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of unitary conversion or end of sequence conversions.
+  uint32_t EOCSelection;          /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and
+                                       interruption: end of unitary conversion or end of sequence conversions.
                                        This parameter can be a value of @ref ADC_EOCSelection. */
 
-  FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the previous
-                                       conversion (for ADC group regular) or previous sequence (for ADC group injected) has been retrieved by user software,
-                                       using function HAL_ADC_GetValue() or HAL_ADCEx_InjectedGetValue().
-                                       This feature automatically adapts the frequency of ADC conversions triggers to the speed of the system that reads the data. Moreover, this avoids risk of overrun
-                                       for low frequency applications.
+  FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the
+                                       previous conversion (for ADC group regular) or previous sequence (for ADC group
+                                       injected) has been retrieved by user software, using function HAL_ADC_GetValue()
+                                       or HAL_ADCEx_InjectedGetValue().
+                                       This feature automatically adapts the frequency of ADC conversions triggers to
+                                       the speed of the system that reads the data. Moreover, this avoids risk of
+                                       overrun for low frequency applications.
                                        This parameter can be set to ENABLE or DISABLE.
-                                       Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC flag (by CPU to free the IRQ pending event or by DMA).
-                                             Auto wait will work but fort a very short time, discarding its intended benefit (except specific case of high load of CPU or DMA transfers which can justify usage of auto wait).
-                                             Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when ADC conversion data is needed:
-                                             use HAL_ADC_PollForConversion() to ensure that conversion is completed and HAL_ADC_GetValue() to retrieve conversion result and trig another conversion start.
-                                             (in case of usage of ADC group injected, use the equivalent functions HAL_ADCExInjected_Start(), HAL_ADCEx_InjectedGetValue(), ...). */
+                                       Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(),
+                                             HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC
+                                             flag (by CPU to free the IRQ pending event or by DMA).
+                                             Auto wait will work but fort a very short time, discarding its intended
+                                             benefit (except specific case of high load of CPU or DMA transfers which
+                                             can justify usage of auto wait).
+                                             Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on,
+                                             when ADC conversion data is needed:
+                                             use HAL_ADC_PollForConversion() to ensure that conversion is completed and
+                                             HAL_ADC_GetValue() to retrieve conversion result and trig another
+                                             conversion start. (in case of usage of ADC group injected, use the
+                                             equivalent functions HAL_ADCExInjected_Start(),
+                                             HAL_ADCEx_InjectedGetValue(), ...). */
 
-  FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular,
-                                       after the first ADC conversion start trigger occurred (software start or external trigger).
-                                       This parameter can be set to ENABLE or DISABLE. */
+  FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion)
+                                           or continuous mode for ADC group regular, after the first ADC conversion
+                                           start trigger occurred (software start or external trigger). This parameter
+                                           can be set to ENABLE or DISABLE. */
 
-  uint32_t NbrOfConversion;       /*!< Specify the number of ranks that will be converted within the regular group sequencer.
-                                       To use the regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
-                                       This parameter must be a number between Min_Data = 1 and Max_Data = 16.
-                                       Note: This parameter must be modified when no conversion is on going on regular group (ADC disabled, or ADC enabled without
-                                       continuous mode or external trigger that could launch a conversion). */
+  uint32_t NbrOfConversion;       /*!< Specify the number of ranks that will be converted within the regular group
+                                       sequencer.
+                                       This parameter is dependent on ScanConvMode:
+                                        - sequencer configured to fully configurable:
+                                          Number of ranks in the scan sequence is configurable using this parameter.
+                                          Note: After the first call of 'HAL_ADC_Init()', each rank corresponding to
+                                                parameter "NbrOfConversion" must be set using 'HAL_ADC_ConfigChannel()'.
+                                                Afterwards, when all needed sequencer ranks are set, parameter
+                                                'NbrOfConversion' can be updated without modifying configuration of
+                                                sequencer ranks (sequencer ranks above 'NbrOfConversion' are discarded).
+                                        - sequencer configured to not fully configurable:
+                                          Number of ranks in the scan sequence is defined by number of channels set in
+                                          the sequence. This parameter is discarded.
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 8.
+                                       Note: This parameter must be modified when no conversion is on going on regular
+                                             group (ADC disabled, or ADC enabled without continuous mode or external
+                                             trigger that could launch a conversion). */
 
-  FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed in Complete-sequence/Discontinuous-sequence
-                                       (main sequence subdivided in successive parts).
-                                       Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
-                                       Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
-                                       This parameter can be set to ENABLE or DISABLE. */
+  FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed
+                                              in Complete-sequence/Discontinuous-sequence (main sequence subdivided in
+                                              successive parts).
+                                              Discontinuous mode is used only if sequencer is enabled (parameter
+                                              'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                              Discontinuous mode can be enabled only if continuous mode is disabled.
+                                              If continuous mode is enabled, this parameter setting is discarded.
+                                              This parameter can be set to ENABLE or DISABLE.
+                                              Note: On this STM32 series, ADC group regular number of discontinuous
+                                                    ranks increment is fixed to one-by-one. */
 
-  uint32_t NbrOfDiscConversion;   /*!< Specifies the number of discontinuous conversions in which the main sequence of ADC group regular (parameter NbrOfConversion) will be subdivided.
+  uint32_t NbrOfDiscConversion;   /*!< Specifies the number of discontinuous conversions in which the main sequence
+                                       of ADC group regular (parameter NbrOfConversion) will be subdivided.
                                        If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
                                        This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
 
-  uint32_t ExternalTrigConv;      /*!< Select the external event source used to trigger ADC group regular conversion start.
-                                       If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger is used instead.
+  uint32_t ExternalTrigConv;      /*!< Select the external event source used to trigger ADC group regular conversion
+                                       start.
+                                       If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger
+                                       is used instead.
                                        This parameter can be a value of @ref ADC_regular_external_trigger_source.
                                        Caution: external trigger source is common to all ADC instances. */
 
-  uint32_t ExternalTrigConvEdge;  /*!< Select the external event edge used to trigger ADC group regular conversion start.
+  uint32_t ExternalTrigConvEdge;  /*!< Select the external event edge used to trigger ADC group regular conversion start
                                        If trigger source is set to ADC_SOFTWARE_START, this parameter is discarded.
                                        This parameter can be a value of @ref ADC_regular_external_trigger_edge */
 
-  FunctionalState DMAContinuousRequests; /*!< Specify whether the DMA requests are performed in one shot mode (DMA transfer stops when number of conversions is reached)
-                                       or in continuous mode (DMA transfer unlimited, whatever number of conversions).
-                                       This parameter can be set to ENABLE or DISABLE.
-                                       Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. */
+  FunctionalState DMAContinuousRequests; /*!< Specify whether the DMA requests are performed in one shot mode (DMA
+                                              transfer stops when number of conversions is reached) or in continuous
+                                              mode (DMA transfer unlimited, whatever number of conversions).
+                                              This parameter can be set to ENABLE or DISABLE.
+                                              Note: In continuous mode, DMA must be configured in circular mode.
+                                                    Otherwise an overrun will be triggered when DMA buffer maximum
+                                                    pointer is reached. */
 
   uint32_t Overrun;               /*!< Select the behavior in case of overrun: data overwritten or preserved (default).
                                        This parameter applies to ADC group regular only.
                                        This parameter can be a value of @ref ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR.
-                                       Note: In case of overrun set to data preserved and usage with programming model with interruption (HAL_Start_IT()): ADC IRQ handler has to clear
-                                       end of conversion flags, this induces the release of the preserved data. If needed, this data can be saved in function
-                                       HAL_ADC_ConvCpltCallback(), placed in user program code (called before end of conversion flags clear).
+                                       Note: In case of overrun set to data preserved and usage with programming model
+                                             with interruption (HAL_Start_IT()): ADC IRQ handler has to clear end of
+                                             conversion flags, this induces the release of the preserved data. If
+                                             needed, this data can be saved in function HAL_ADC_ConvCpltCallback(),
+                                             placed in user program code (called before end of conversion flags clear)
                                        Note: Error reporting with respect to the conversion mode:
-                                             - Usage with ADC conversion by polling for event or interruption: Error is reported only if overrun is set to data preserved. If overrun is set to data
-                                               overwritten, user can willingly not read all the converted data, this is not considered as an erroneous case.
-                                             - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register). */
+                                             - Usage with ADC conversion by polling for event or interruption: Error is
+                                               reported only if overrun is set to data preserved. If overrun is set to
+                                               data overwritten, user can willingly not read all the converted data,
+                                               this is not considered as an erroneous case.
+                                             - Usage with ADC conversion by DMA: Error is reported whatever overrun
+                                               setting (DMA is expected to process all data from data register). */
 
   FunctionalState OversamplingMode;       /*!< Specify whether the oversampling feature is enabled or disabled.
                                                This parameter can be set to ENABLE or DISABLE.
-                                               Note: This parameter can be modified only if there is no conversion is ongoing on ADC groups regular and injected */
+                                               Note: This parameter can be modified only if there is no conversion is
+                                                     ongoing on ADC groups regular and injected */
 
   ADC_OversamplingTypeDef Oversampling;   /*!< Specify the Oversampling parameters.
-                                               Caution: this setting overwrites the previous oversampling configuration if oversampling is already enabled. */
+                                               Caution: this setting overwrites the previous oversampling configuration
+                                                        if oversampling is already enabled. */
 
 #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0)
   uint32_t DFSDMConfig;           /*!< Specify whether ADC conversion data is sent directly to DFSDM.
                                        This parameter can be a value of @ref ADC_HAL_EC_REG_DFSDM_TRANSFER.
-                                       Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */
+                                       Note: This parameter can be modified only if there is no conversion is ongoing
+                                             (both ADSTART and JADSTART cleared). */
 
 #endif /* ADC_CFGR_DFSDMCFG */
 } ADC_InitTypeDef;
@@ -191,56 +247,72 @@
   * @note   The setting of these parameters by function HAL_ADC_ConfigChannel() is conditioned to ADC state.
   *         ADC state can be either:
   *          - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'SingleDiff')
-  *          - For all except parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on regular group.
-  *          - For parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on regular and injected groups.
+  *          - For all except parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion
+  *            on going on regular group.
+  *          - For parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on
+  *            regular and injected groups.
   *         If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
-  *         without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition)
-  *         on the fly).
+  *         without error reporting (as it can be the expected behavior in case of intended action to update another
+  *         parameter (which fulfills the ADC state condition) on the fly).
   */
 typedef struct
 {
   uint32_t Channel;                /*!< Specify the channel to configure into ADC regular group.
                                         This parameter can be a value of @ref ADC_HAL_EC_CHANNEL
-                                        Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */
+                                        Note: Depending on devices and ADC instances, some channels may not be available
+                                              on device package pins. Refer to device datasheet for channels
+                                              availability. */
 
   uint32_t Rank;                   /*!< Specify the rank in the regular group sequencer.
                                         This parameter can be a value of @ref ADC_HAL_EC_REG_SEQ_RANKS
-                                        Note: to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by
-                                        the new channel setting (or parameter number of conversions adjusted) */
+                                        Note: to disable a channel or change order of conversion sequencer, rank
+                                        containing a previous channel setting can be overwritten by the new channel
+                                        setting (or parameter number of conversions adjusted) */
 
   uint32_t SamplingTime;           /*!< Sampling time value to be set for the selected channel.
                                         Unit: ADC clock cycles
                                         Conversion time is the addition of sampling time and processing time
-                                        (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+                                        (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits,
+                                        8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
                                         This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME
-                                        Caution: This parameter applies to a channel that can be used into regular and/or injected group.
-                                                 It overwrites the last setting.
-                                        Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
-                                              sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                        Caution: This parameter applies to a channel that can be used into regular
+                                                 and/or injected group. It overwrites the last setting.
+                                        Note: In case of usage of internal measurement channels (VrefInt, Vbat, ...),
+                                              sampling time constraints must be respected (sampling time can be adjusted
+                                              in function of ADC clock frequency and sampling time setting).
                                               Refer to device datasheet for timings values. */
 
   uint32_t SingleDiff;             /*!< Select single-ended or differential input.
-                                        In differential mode: Differential measurement is carried out between the selected channel 'i' (positive input) and channel 'i+1' (negative input).
-                                                              Only channel 'i' has to be configured, channel 'i+1' is configured automatically.
+                                        In differential mode: Differential measurement is carried out between the
+                                        selected channel 'i' (positive input) and channel 'i+1' (negative input).
+                                        Only channel 'i' has to be configured, channel 'i+1' is configured automatically
                                         This parameter must be a value of @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING
-                                        Caution: This parameter applies to a channel that can be used in a regular and/or injected group.
+                                        Caution: This parameter applies to a channel that can be used in a regular
+                                                 and/or injected group.
                                                  It overwrites the last setting.
-                                        Note: Refer to Reference Manual to ensure the selected channel is available in differential mode.
-                                        Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is not usable separately.
-                                        Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
-                                              If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behavior in case
-                                        of another parameter update on the fly) */
+                                        Note: Refer to Reference Manual to ensure the selected channel is available in
+                                              differential mode.
+                                        Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is
+                                              not usable separately.
+                                        Note: This parameter must be modified when ADC is disabled (before ADC start
+                                              conversion or after ADC stop conversion).
+                                              If ADC is enabled, this parameter setting is bypassed without error
+                                              reporting (as it can be the expected behavior in case of another parameter
+                                              update on the fly) */
 
   uint32_t OffsetNumber;           /*!< Select the offset number
                                         This parameter can be a value of @ref ADC_HAL_EC_OFFSET_NB
-                                        Caution: Only one offset is allowed per channel. This parameter overwrites the last setting. */
+                                        Caution: Only one offset is allowed per channel. This parameter overwrites the
+                                                 last setting. */
 
   uint32_t Offset;                 /*!< Define the offset to be subtracted from the raw converted data.
                                         Offset value must be a positive number.
-                                        Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF,
+                                        Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter
+                                        must be a number between Min_Data = 0x000 and Max_Data = 0xFFF,
                                         0x3FF, 0xFF or 0x3F respectively.
-                                        Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled
-                                              without continuous mode or external trigger that could launch a conversion). */
+                                        Note: This parameter must be modified when no conversion is on going on both
+                                              regular and injected groups (ADC disabled, or ADC enabled without
+                                              continuous mode or external trigger that could launch a conversion). */
 
 } ADC_ChannelConfTypeDef;
 
@@ -248,47 +320,66 @@
   * @brief  Structure definition of ADC analog watchdog
   * @note   The setting of these parameters by function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state.
   *         ADC state can be either:
-  *          - For all parameters: ADC disabled or ADC enabled without conversion on going on ADC groups regular and injected.
+  *          - For all parameters: ADC disabled or ADC enabled without conversion on going on ADC groups regular and
+               injected.
   */
 typedef struct
 {
   uint32_t WatchdogNumber;    /*!< Select which ADC analog watchdog is monitoring the selected channel.
-                                   For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode')
-                                   For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel)
+                                   For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels
+                                                          by setting parameter 'WatchdogMode')
+                                   For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls
+                                                                of 'HAL_ADC_AnalogWDGConfig()' for each channel)
                                    This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */
 
   uint32_t WatchdogMode;      /*!< Configure the ADC analog watchdog mode: single/all/none channels.
-                                   For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all channels, ADC groups regular and-or injected.
-                                   For Analog Watchdog 2 and 3: Several channels can be monitored by applying successively the AWD init structure. Channels on ADC group regular and injected are not differentiated: Set value 'ADC_ANALOGWATCHDOG_SINGLE_xxx' to monitor 1 channel, value 'ADC_ANALOGWATCHDOG_ALL_xxx' to monitor all channels, 'ADC_ANALOGWATCHDOG_NONE' to monitor no channel.
+                                   For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all
+                                                          channels, ADC groups regular and-or injected.
+                                   For Analog Watchdog 2 and 3: Several channels can be monitored by applying
+                                                                successively the AWD init structure. Channels on ADC
+                                                                group regular and injected are not differentiated: Set
+                                                                value 'ADC_ANALOGWATCHDOG_SINGLE_xxx' to monitor 1
+                                                                channel, value 'ADC_ANALOGWATCHDOG_ALL_xxx' to monitor
+                                                                all channels, 'ADC_ANALOGWATCHDOG_NONE' to monitor no
+                                                                channel.
                                    This parameter can be a value of @ref ADC_analog_watchdog_mode. */
 
   uint32_t Channel;           /*!< Select which ADC channel to monitor by analog watchdog.
-                                   For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' is configured on single channel (only 1 channel can be monitored).
-                                   For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature, call successively the function HAL_ADC_AnalogWDGConfig() for each channel to be added (or removed with value 'ADC_ANALOGWATCHDOG_NONE').
+                                   For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode'
+                                                          is configured on single channel (only 1 channel can be
+                                                          monitored).
+                                   For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature,
+                                                                call successively the function HAL_ADC_AnalogWDGConfig()
+                                                                for each channel to be added (or removed with value
+                                                                'ADC_ANALOGWATCHDOG_NONE').
                                    This parameter can be a value of @ref ADC_HAL_EC_CHANNEL. */
 
   FunctionalState ITMode;     /*!< Specify whether the analog watchdog is configured in interrupt or polling mode.
                                    This parameter can be set to ENABLE or DISABLE */
 
   uint32_t HighThreshold;     /*!< Configure the ADC analog watchdog High threshold value.
-                                   Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number
-                                   between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
-                                   Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits
-                                         the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored.
+                                   Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a
+                                   number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F
+                                   respectively.
+                                   Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC
+                                         resolution is 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits the 2
+                                         LSB are ignored.
                                    Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are
                                          impacted: the comparison of analog watchdog thresholds is done on
                                          oversampling final computation (after ratio and shift application):
                                          ADC data register bitfield [15:4] (12 most significant bits). */
 
   uint32_t LowThreshold;      /*!< Configures the ADC analog watchdog Low threshold value.
-                                   Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number
-                                   between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
-                                   Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits
-                                         the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored.
+                                   Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a
+                                   number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F
+                                   respectively.
+                                   Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC
+                                         resolution is 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits the 2
+                                         LSB are ignored.
                                    Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are
                                          impacted: the comparison of analog watchdog thresholds is done on
                                          oversampling final computation (after ratio and shift application):
-                                         ADC data register bitfield [15:4] (12 most significant bits). */
+                                         ADC data register bitfield [15:4] (12 most significant bits).*/
 } ADC_AnalogWDGConfTypeDef;
 
 /**
@@ -319,7 +410,8 @@
 /* States of ADC global scope */
 #define HAL_ADC_STATE_RESET             (0x00000000UL)   /*!< ADC not yet initialized or disabled */
 #define HAL_ADC_STATE_READY             (0x00000001UL)   /*!< ADC peripheral ready for use */
-#define HAL_ADC_STATE_BUSY_INTERNAL     (0x00000002UL)   /*!< ADC is busy due to an internal process (initialization, calibration) */
+#define HAL_ADC_STATE_BUSY_INTERNAL     (0x00000002UL)   /*!< ADC is busy due to an internal process (initialization,
+                                                              calibration, ...) */
 #define HAL_ADC_STATE_TIMEOUT           (0x00000004UL)   /*!< TimeOut occurrence */
 
 /* States of ADC errors */
@@ -328,15 +420,20 @@
 #define HAL_ADC_STATE_ERROR_DMA         (0x00000040UL)   /*!< DMA error occurrence */
 
 /* States of ADC group regular */
-#define HAL_ADC_STATE_REG_BUSY          (0x00000100UL)   /*!< A conversion on ADC group regular is ongoing or can occur (either by continuous mode,
-                                                              external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_REG_BUSY          (0x00000100UL)   /*!< A conversion on ADC group regular is ongoing or can occur
+                                                              (either by continuous mode, external trigger, low power
+                                                              auto power-on (if feature available), multimode ADC master
+                                                              control (if feature available)) */
 #define HAL_ADC_STATE_REG_EOC           (0x00000200UL)   /*!< Conversion data available on group regular */
 #define HAL_ADC_STATE_REG_OVR           (0x00000400UL)   /*!< Overrun occurrence */
-#define HAL_ADC_STATE_REG_EOSMP         (0x00000800UL)   /*!< Not available on this STM32 series: End Of Sampling flag raised  */
+#define HAL_ADC_STATE_REG_EOSMP         (0x00000800UL)   /*!< Not available on this STM32 series: End Of Sampling flag
+                                                              raised  */
 
 /* States of ADC group injected */
-#define HAL_ADC_STATE_INJ_BUSY          (0x00001000UL)   /*!< A conversion on ADC group injected is ongoing or can occur (either by auto-injection mode,
-                                                              external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_INJ_BUSY          (0x00001000UL)   /*!< A conversion on ADC group injected is ongoing or can occur
+                                                              (either by auto-injection mode, external trigger, low
+                                                              power auto power-on (if feature available), multimode
+                                                              ADC master control (if feature available)) */
 #define HAL_ADC_STATE_INJ_EOC           (0x00002000UL)   /*!< Conversion data available on group injected */
 #define HAL_ADC_STATE_INJ_JQOVF         (0x00004000UL)   /*!< Injected queue overflow occurrence */
 
@@ -346,7 +443,8 @@
 #define HAL_ADC_STATE_AWD3              (0x00040000UL)   /*!< Out-of-window occurrence of ADC analog watchdog 3 */
 
 /* States of ADC multi-mode */
-#define HAL_ADC_STATE_MULTIMODE_SLAVE   (0x00100000UL)   /*!< ADC in multimode slave state, controlled by another ADC master (when feature available) */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE   (0x00100000UL)   /*!< ADC in multimode slave state, controlled by another ADC
+                                                              master (when feature available) */
 
 /**
   * @}
@@ -361,20 +459,25 @@
 typedef struct
 #endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
 {
-  ADC_TypeDef                   *Instance;              /*!< Register base address */
-  ADC_InitTypeDef               Init;                   /*!< ADC initialization parameters and regular conversions setting */
-  DMA_HandleTypeDef             *DMA_Handle;            /*!< Pointer DMA Handler */
-  HAL_LockTypeDef               Lock;                   /*!< ADC locking object */
-  __IO uint32_t                 State;                  /*!< ADC communication state (bitmap of ADC states) */
-  __IO uint32_t                 ErrorCode;              /*!< ADC Error code */
-  ADC_InjectionConfigTypeDef    InjectionConfig ;       /*!< ADC injected channel configuration build-up structure */
+  ADC_TypeDef                   *Instance;                     /*!< Register base address */
+  ADC_InitTypeDef               Init;                          /*!< ADC initialization parameters and regular
+                                                                    conversions setting */
+  DMA_HandleTypeDef             *DMA_Handle;                   /*!< Pointer DMA Handler */
+  HAL_LockTypeDef               Lock;                          /*!< ADC locking object */
+  __IO uint32_t                 State;                         /*!< ADC communication state (bitmap of ADC states) */
+  __IO uint32_t                 ErrorCode;                     /*!< ADC Error code */
+  ADC_InjectionConfigTypeDef    InjectionConfig ;              /*!< ADC injected channel configuration build-up
+                                                                  structure */
 #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
   void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);              /*!< ADC conversion complete callback */
-  void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc);          /*!< ADC conversion DMA half-transfer callback */
+  void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc);          /*!< ADC conversion DMA half-transfer
+                                                                                 callback */
   void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC analog watchdog 1 callback */
   void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc);                 /*!< ADC error callback */
-  void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC group injected conversion complete callback */
-  void (* InjectedQueueOverflowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected context queue overflow callback */
+  void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC group injected conversion complete
+                                                                                 callback */
+  void (* InjectedQueueOverflowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected context queue
+                                                                                 overflow callback */
   void (* LevelOutOfWindow2Callback)(struct __ADC_HandleTypeDef *hadc);     /*!< ADC analog watchdog 2 callback */
   void (* LevelOutOfWindow3Callback)(struct __ADC_HandleTypeDef *hadc);     /*!< ADC analog watchdog 3 callback */
   void (* EndOfSamplingCallback)(struct __ADC_HandleTypeDef *hadc);         /*!< ADC end of sampling callback */
@@ -439,22 +542,37 @@
 /** @defgroup ADC_HAL_EC_COMMON_CLOCK_SOURCE  ADC common - Clock source
   * @{
   */
-#define ADC_CLOCK_SYNC_PCLK_DIV1           (LL_ADC_CLOCK_SYNC_PCLK_DIV1)  /*!< ADC synchronous clock derived from AHB clock without prescaler */
-#define ADC_CLOCK_SYNC_PCLK_DIV2           (LL_ADC_CLOCK_SYNC_PCLK_DIV2)  /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */
-#define ADC_CLOCK_SYNC_PCLK_DIV4           (LL_ADC_CLOCK_SYNC_PCLK_DIV4)  /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */
 
-#define ADC_CLOCK_ASYNC_DIV1               (LL_ADC_CLOCK_ASYNC_DIV1)      /*!< ADC asynchronous clock without prescaler */
-#define ADC_CLOCK_ASYNC_DIV2               (LL_ADC_CLOCK_ASYNC_DIV2)      /*!< ADC asynchronous clock with prescaler division by 2   */
-#define ADC_CLOCK_ASYNC_DIV4               (LL_ADC_CLOCK_ASYNC_DIV4)      /*!< ADC asynchronous clock with prescaler division by 4   */
-#define ADC_CLOCK_ASYNC_DIV6               (LL_ADC_CLOCK_ASYNC_DIV6)      /*!< ADC asynchronous clock with prescaler division by 6   */
-#define ADC_CLOCK_ASYNC_DIV8               (LL_ADC_CLOCK_ASYNC_DIV8)      /*!< ADC asynchronous clock with prescaler division by 8   */
-#define ADC_CLOCK_ASYNC_DIV10              (LL_ADC_CLOCK_ASYNC_DIV10)     /*!< ADC asynchronous clock with prescaler division by 10  */
-#define ADC_CLOCK_ASYNC_DIV12              (LL_ADC_CLOCK_ASYNC_DIV12)     /*!< ADC asynchronous clock with prescaler division by 12  */
-#define ADC_CLOCK_ASYNC_DIV16              (LL_ADC_CLOCK_ASYNC_DIV16)     /*!< ADC asynchronous clock with prescaler division by 16  */
-#define ADC_CLOCK_ASYNC_DIV32              (LL_ADC_CLOCK_ASYNC_DIV32)     /*!< ADC asynchronous clock with prescaler division by 32  */
-#define ADC_CLOCK_ASYNC_DIV64              (LL_ADC_CLOCK_ASYNC_DIV64)     /*!< ADC asynchronous clock with prescaler division by 64  */
-#define ADC_CLOCK_ASYNC_DIV128             (LL_ADC_CLOCK_ASYNC_DIV128)    /*!< ADC asynchronous clock with prescaler division by 128 */
-#define ADC_CLOCK_ASYNC_DIV256             (LL_ADC_CLOCK_ASYNC_DIV256)    /*!< ADC asynchronous clock with prescaler division by 256 */
+#define ADC_CLOCK_SYNC_PCLK_DIV1           (LL_ADC_CLOCK_SYNC_PCLK_DIV1)  /*!< ADC synchronous clock from AHB clock
+                                           without prescaler */
+#define ADC_CLOCK_SYNC_PCLK_DIV2           (LL_ADC_CLOCK_SYNC_PCLK_DIV2)  /*!< ADC synchronous clock from AHB clock
+                                           with prescaler division by 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4           (LL_ADC_CLOCK_SYNC_PCLK_DIV4)  /*!< ADC synchronous clock from AHB clock
+                                           with prescaler division by 4 */
+#define ADC_CLOCK_ASYNC_DIV1               (LL_ADC_CLOCK_ASYNC_DIV1)      /*!< ADC asynchronous clock without
+                                           prescaler */
+#define ADC_CLOCK_ASYNC_DIV2               (LL_ADC_CLOCK_ASYNC_DIV2)      /*!< ADC asynchronous clock with prescaler
+                                           division by 2   */
+#define ADC_CLOCK_ASYNC_DIV4               (LL_ADC_CLOCK_ASYNC_DIV4)      /*!< ADC asynchronous clock with prescaler
+                                           division by 4   */
+#define ADC_CLOCK_ASYNC_DIV6               (LL_ADC_CLOCK_ASYNC_DIV6)      /*!< ADC asynchronous clock with prescaler
+                                           division by 6   */
+#define ADC_CLOCK_ASYNC_DIV8               (LL_ADC_CLOCK_ASYNC_DIV8)      /*!< ADC asynchronous clock with prescaler
+                                           division by 8   */
+#define ADC_CLOCK_ASYNC_DIV10              (LL_ADC_CLOCK_ASYNC_DIV10)     /*!< ADC asynchronous clock with prescaler
+                                           division by 10  */
+#define ADC_CLOCK_ASYNC_DIV12              (LL_ADC_CLOCK_ASYNC_DIV12)     /*!< ADC asynchronous clock with prescaler
+                                           division by 12  */
+#define ADC_CLOCK_ASYNC_DIV16              (LL_ADC_CLOCK_ASYNC_DIV16)     /*!< ADC asynchronous clock with prescaler
+                                           division by 16  */
+#define ADC_CLOCK_ASYNC_DIV32              (LL_ADC_CLOCK_ASYNC_DIV32)     /*!< ADC asynchronous clock with prescaler
+                                           division by 32  */
+#define ADC_CLOCK_ASYNC_DIV64              (LL_ADC_CLOCK_ASYNC_DIV64)     /*!< ADC asynchronous clock with prescaler
+                                           division by 64  */
+#define ADC_CLOCK_ASYNC_DIV128             (LL_ADC_CLOCK_ASYNC_DIV128)    /*!< ADC asynchronous clock with prescaler
+                                           division by 128 */
+#define ADC_CLOCK_ASYNC_DIV256             (LL_ADC_CLOCK_ASYNC_DIV256)    /*!< ADC asynchronous clock with prescaler
+                                           division by 256 */
 /**
   * @}
   */
@@ -473,8 +591,10 @@
 /** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment
   * @{
   */
-#define ADC_DATAALIGN_RIGHT                (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
-#define ADC_DATAALIGN_LEFT                 (LL_ADC_DATA_ALIGN_LEFT)       /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/
+#define ADC_DATAALIGN_RIGHT                (LL_ADC_DATA_ALIGN_RIGHT) /*!< ADC conversion data alignment: right aligned
+                                           (alignment on data register LSB bit 0)*/
+#define ADC_DATAALIGN_LEFT                 (LL_ADC_DATA_ALIGN_LEFT)  /*!< ADC conversion data alignment: left aligned
+                                           (alignment on data register MSB bit 15)*/
 /**
   * @}
   */
@@ -492,23 +612,40 @@
   * @{
   */
 /* ADC group regular trigger sources for all ADC instances */
-#define ADC_SOFTWARE_START            (LL_ADC_REG_TRIG_SOFTWARE)                 /*!< ADC group regular conversion trigger internal: SW start. */
-#define ADC_EXTERNALTRIG_T1_TRGO      (LL_ADC_REG_TRIG_EXT_TIM1_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T1_TRGO2     (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2)           /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T1_CC1       (LL_ADC_REG_TRIG_EXT_TIM1_CH1)             /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T1_CC2       (LL_ADC_REG_TRIG_EXT_TIM1_CH2)             /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T1_CC3       (LL_ADC_REG_TRIG_EXT_TIM1_CH3)             /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T2_TRGO      (LL_ADC_REG_TRIG_EXT_TIM2_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T2_CC2       (LL_ADC_REG_TRIG_EXT_TIM2_CH2)             /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T3_TRGO      (LL_ADC_REG_TRIG_EXT_TIM3_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T3_CC4       (LL_ADC_REG_TRIG_EXT_TIM3_CH4)             /*!< ADC group regular conversion trigger from external peripheral: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T4_TRGO      (LL_ADC_REG_TRIG_EXT_TIM4_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T4_CC4       (LL_ADC_REG_TRIG_EXT_TIM4_CH4)             /*!< ADC group regular conversion trigger from external peripheral: TIM4 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T6_TRGO      (LL_ADC_REG_TRIG_EXT_TIM6_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T8_TRGO      (LL_ADC_REG_TRIG_EXT_TIM8_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T8_TRGO2     (LL_ADC_REG_TRIG_EXT_TIM8_TRGO2)           /*!< ADC group regular conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_T15_TRGO     (LL_ADC_REG_TRIG_EXT_TIM15_TRGO)           /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIG_EXT_IT11     (LL_ADC_REG_TRIG_EXT_EXTI_LINE11)          /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */
+#define ADC_SOFTWARE_START            (LL_ADC_REG_TRIG_SOFTWARE)                  /*!< ADC group regular conversion
+                                      trigger software start */
+#define ADC_EXTERNALTRIG_T1_TRGO      (LL_ADC_REG_TRIG_EXT_TIM1_TRGO)             /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM1 TRGO. */
+#define ADC_EXTERNALTRIG_T1_TRGO2     (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2)            /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM1 TRGO2. */
+#define ADC_EXTERNALTRIG_T1_CC1       (LL_ADC_REG_TRIG_EXT_TIM1_CH1)              /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM1 channel 1 event (capture compare). */
+#define ADC_EXTERNALTRIG_T1_CC2       (LL_ADC_REG_TRIG_EXT_TIM1_CH2)              /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM1 channel 2 event (capture compare). */
+#define ADC_EXTERNALTRIG_T1_CC3       (LL_ADC_REG_TRIG_EXT_TIM1_CH3)              /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM1 channel 3 event (capture compare). */
+#define ADC_EXTERNALTRIG_T2_TRGO      (LL_ADC_REG_TRIG_EXT_TIM2_TRGO)             /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM2 TRGO. */
+#define ADC_EXTERNALTRIG_T2_CC2       (LL_ADC_REG_TRIG_EXT_TIM2_CH2)              /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM2 channel 2 event (capture compare). */
+#define ADC_EXTERNALTRIG_T3_TRGO      (LL_ADC_REG_TRIG_EXT_TIM3_TRGO)             /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM3 TRGO. */
+#define ADC_EXTERNALTRIG_T3_CC4       (LL_ADC_REG_TRIG_EXT_TIM3_CH4)              /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM3 channel 4 event (capture compare). */
+#define ADC_EXTERNALTRIG_T4_TRGO      (LL_ADC_REG_TRIG_EXT_TIM4_TRGO)             /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM4 TRGO. */
+#define ADC_EXTERNALTRIG_T4_CC4       (LL_ADC_REG_TRIG_EXT_TIM4_CH4)              /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM4 channel 4 event (capture compare). */
+#define ADC_EXTERNALTRIG_T6_TRGO      (LL_ADC_REG_TRIG_EXT_TIM6_TRGO)             /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM6 TRGO. */
+#define ADC_EXTERNALTRIG_T8_TRGO      (LL_ADC_REG_TRIG_EXT_TIM8_TRGO)             /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM8 TRGO. */
+#define ADC_EXTERNALTRIG_T8_TRGO2     (LL_ADC_REG_TRIG_EXT_TIM8_TRGO2)            /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM8 TRGO2. */
+#define ADC_EXTERNALTRIG_T15_TRGO     (LL_ADC_REG_TRIG_EXT_TIM15_TRGO)            /*!< ADC group regular conversion
+                                      trigger from external peripheral: TIM15 TRGO. */
+#define ADC_EXTERNALTRIG_EXT_IT11     (LL_ADC_REG_TRIG_EXT_EXTI_LINE11)           /*!< ADC group regular conversion
+                                      trigger from external peripheral: external interrupt line 11. */
 /**
   * @}
   */
@@ -516,10 +653,14 @@
 /** @defgroup ADC_regular_external_trigger_edge ADC group regular trigger edge (when external trigger is selected)
   * @{
   */
-#define ADC_EXTERNALTRIGCONVEDGE_NONE           (0x00000000UL)                      /*!< Regular conversions hardware trigger detection disabled */
-#define ADC_EXTERNALTRIGCONVEDGE_RISING         (LL_ADC_REG_TRIG_EXT_RISING)        /*!< ADC group regular conversion trigger polarity set to rising edge */
-#define ADC_EXTERNALTRIGCONVEDGE_FALLING        (LL_ADC_REG_TRIG_EXT_FALLING)       /*!< ADC group regular conversion trigger polarity set to falling edge */
-#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING  (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE           (0x00000000UL)                      /*!< ADC group regular trigger
+                                                disabled (SW start)*/
+#define ADC_EXTERNALTRIGCONVEDGE_RISING         (LL_ADC_REG_TRIG_EXT_RISING)        /*!< ADC group regular conversion
+                                                trigger polarity set to rising edge */
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING        (LL_ADC_REG_TRIG_EXT_FALLING)       /*!< ADC group regular conversion
+                                                trigger polarity set to falling edge */
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING  (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion
+                                                trigger polarity set to both rising and falling edges */
 /**
   * @}
   */
@@ -536,8 +677,10 @@
 /** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR  ADC group regular - Overrun behavior on conversion data
   * @{
   */
-#define ADC_OVR_DATA_PRESERVED             (LL_ADC_REG_OVR_DATA_PRESERVED)    /*!< ADC group regular behavior in case of overrun: data preserved */
-#define ADC_OVR_DATA_OVERWRITTEN           (LL_ADC_REG_OVR_DATA_OVERWRITTEN)  /*!< ADC group regular behavior in case of overrun: data overwritten */
+#define ADC_OVR_DATA_PRESERVED             (LL_ADC_REG_OVR_DATA_PRESERVED)    /*!< ADC group regular behavior in case
+                                           of overrun: data preserved */
+#define ADC_OVR_DATA_OVERWRITTEN           (LL_ADC_REG_OVR_DATA_OVERWRITTEN)  /*!< ADC group regular behavior in case
+                                           of overrun: data overwritten */
 /**
   * @}
   */
@@ -577,7 +720,9 @@
 #define ADC_SAMPLETIME_247CYCLES_5       (LL_ADC_SAMPLINGTIME_247CYCLES_5)  /*!< Sampling time 247.5 ADC clock cycles */
 #define ADC_SAMPLETIME_640CYCLES_5       (LL_ADC_SAMPLINGTIME_640CYCLES_5)  /*!< Sampling time 640.5 ADC clock cycles */
 #if defined(ADC_SMPR1_SMPPLUS)
-#define ADC_SAMPLETIME_3CYCLES_5           (ADC_SMPR1_SMPPLUS | LL_ADC_SAMPLINGTIME_2CYCLES_5) /*!< Sampling time 3.5 ADC clock cycles. If selected, this sampling time replaces all sampling time 2.5 ADC clock cycles. These 2 sampling times cannot be used simultaneously. */
+#define ADC_SAMPLETIME_3CYCLES_5         (ADC_SMPR1_SMPPLUS | LL_ADC_SAMPLINGTIME_2CYCLES_5) /*!< Sampling time 3.5
+                                         ADC clock cycles. If selected, this sampling time replaces sampling time
+                                         2.5 ADC clock cycles. These 2 sampling times cannot be used simultaneously. */
 #endif /* ADC_SMPR1_SMPPLUS */
 /**
   * @}
@@ -588,44 +733,56 @@
   */
 /* Note: VrefInt, TempSensor and Vbat internal channels are not available on  */
 /*        all ADC instances (refer to Reference Manual).                      */
-#define ADC_CHANNEL_0                      (LL_ADC_CHANNEL_0)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0  */
-#define ADC_CHANNEL_1                      (LL_ADC_CHANNEL_1)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1  */
-#define ADC_CHANNEL_2                      (LL_ADC_CHANNEL_2)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2  */
-#define ADC_CHANNEL_3                      (LL_ADC_CHANNEL_3)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3  */
-#define ADC_CHANNEL_4                      (LL_ADC_CHANNEL_4)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4  */
-#define ADC_CHANNEL_5                      (LL_ADC_CHANNEL_5)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5  */
-#define ADC_CHANNEL_6                      (LL_ADC_CHANNEL_6)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6  */
-#define ADC_CHANNEL_7                      (LL_ADC_CHANNEL_7)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7  */
-#define ADC_CHANNEL_8                      (LL_ADC_CHANNEL_8)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8  */
-#define ADC_CHANNEL_9                      (LL_ADC_CHANNEL_9)               /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9  */
-#define ADC_CHANNEL_10                     (LL_ADC_CHANNEL_10)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */
-#define ADC_CHANNEL_11                     (LL_ADC_CHANNEL_11)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */
-#define ADC_CHANNEL_12                     (LL_ADC_CHANNEL_12)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */
-#define ADC_CHANNEL_13                     (LL_ADC_CHANNEL_13)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */
-#define ADC_CHANNEL_14                     (LL_ADC_CHANNEL_14)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */
-#define ADC_CHANNEL_15                     (LL_ADC_CHANNEL_15)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */
-#define ADC_CHANNEL_16                     (LL_ADC_CHANNEL_16)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */
-#define ADC_CHANNEL_17                     (LL_ADC_CHANNEL_17)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */
-#define ADC_CHANNEL_18                     (LL_ADC_CHANNEL_18)              /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */
-#define ADC_CHANNEL_VREFINT                (LL_ADC_CHANNEL_VREFINT)         /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */
-#define ADC_CHANNEL_TEMPSENSOR             (LL_ADC_CHANNEL_TEMPSENSOR)      /*!< ADC internal channel connected to Temperature sensor. */
-#define ADC_CHANNEL_VBAT                   (LL_ADC_CHANNEL_VBAT)            /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. */
+#define ADC_CHANNEL_0                      (LL_ADC_CHANNEL_0)              /*!< External channel (GPIO pin) ADCx_IN0  */
+#define ADC_CHANNEL_1                      (LL_ADC_CHANNEL_1)              /*!< External channel (GPIO pin) ADCx_IN1  */
+#define ADC_CHANNEL_2                      (LL_ADC_CHANNEL_2)              /*!< External channel (GPIO pin) ADCx_IN2  */
+#define ADC_CHANNEL_3                      (LL_ADC_CHANNEL_3)              /*!< External channel (GPIO pin) ADCx_IN3  */
+#define ADC_CHANNEL_4                      (LL_ADC_CHANNEL_4)              /*!< External channel (GPIO pin) ADCx_IN4  */
+#define ADC_CHANNEL_5                      (LL_ADC_CHANNEL_5)              /*!< External channel (GPIO pin) ADCx_IN5  */
+#define ADC_CHANNEL_6                      (LL_ADC_CHANNEL_6)              /*!< External channel (GPIO pin) ADCx_IN6  */
+#define ADC_CHANNEL_7                      (LL_ADC_CHANNEL_7)              /*!< External channel (GPIO pin) ADCx_IN7  */
+#define ADC_CHANNEL_8                      (LL_ADC_CHANNEL_8)              /*!< External channel (GPIO pin) ADCx_IN8  */
+#define ADC_CHANNEL_9                      (LL_ADC_CHANNEL_9)              /*!< External channel (GPIO pin) ADCx_IN9  */
+#define ADC_CHANNEL_10                     (LL_ADC_CHANNEL_10)             /*!< External channel (GPIO pin) ADCx_IN10 */
+#define ADC_CHANNEL_11                     (LL_ADC_CHANNEL_11)             /*!< External channel (GPIO pin) ADCx_IN11 */
+#define ADC_CHANNEL_12                     (LL_ADC_CHANNEL_12)             /*!< External channel (GPIO pin) ADCx_IN12 */
+#define ADC_CHANNEL_13                     (LL_ADC_CHANNEL_13)             /*!< External channel (GPIO pin) ADCx_IN13 */
+#define ADC_CHANNEL_14                     (LL_ADC_CHANNEL_14)             /*!< External channel (GPIO pin) ADCx_IN14 */
+#define ADC_CHANNEL_15                     (LL_ADC_CHANNEL_15)             /*!< External channel (GPIO pin) ADCx_IN15 */
+#define ADC_CHANNEL_16                     (LL_ADC_CHANNEL_16)             /*!< External channel (GPIO pin) ADCx_IN16 */
+#define ADC_CHANNEL_17                     (LL_ADC_CHANNEL_17)             /*!< External channel (GPIO pin) ADCx_IN17 */
+#define ADC_CHANNEL_18                     (LL_ADC_CHANNEL_18)             /*!< External channel (GPIO pin) ADCx_IN18 */
+#define ADC_CHANNEL_VREFINT                (LL_ADC_CHANNEL_VREFINT)        /*!< Internal channel VrefInt: Internal
+                                           voltage reference. */
+#define ADC_CHANNEL_TEMPSENSOR             (LL_ADC_CHANNEL_TEMPSENSOR)     /*!< Internal channel Temperature sensor. */
+#define ADC_CHANNEL_VBAT                   (LL_ADC_CHANNEL_VBAT)           /*!< Internal channel Vbat/3: Vbat voltage
+                                           through a divider ladder of factor 1/3 to have channel voltage always below
+                                           Vdda. */
 #if defined(ADC1) && !defined(ADC2)
-#define ADC_CHANNEL_DAC1CH1                (LL_ADC_CHANNEL_DAC1CH1)         /*!< ADC internal channel connected to DAC1 channel 1, channel specific to ADC1. This channel is shared with ADC internal channel connected to temperature sensor, selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
-#define ADC_CHANNEL_DAC1CH2                (LL_ADC_CHANNEL_DAC1CH2)         /*!< ADC internal channel connected to DAC1 channel 2, channel specific to ADC1. This channel is shared with ADC internal channel connected to Vbat, selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
+#define ADC_CHANNEL_DAC1CH1                (LL_ADC_CHANNEL_DAC1CH1)        /*!< Internal channel DAC1 channel 1,
+                                           channel specific to ADC1. This channel is shared with Internal temperature
+                                           sensor, selection is done using function
+                                           @ref LL_ADC_SetCommonPathInternalCh(). */
+#define ADC_CHANNEL_DAC1CH2                (LL_ADC_CHANNEL_DAC1CH2)        /*!< Internal channel DAC1 channel 2,
+                                           channel specific to ADC1. This channel is shared with Internal Vbat,
+                                           selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
 #elif defined(ADC2)
-#define ADC_CHANNEL_DAC1CH1_ADC2           (LL_ADC_CHANNEL_DAC1CH1_ADC2)    /*!< ADC internal channel connected to DAC1 channel 1, channel specific to ADC2 */
-#define ADC_CHANNEL_DAC1CH2_ADC2           (LL_ADC_CHANNEL_DAC1CH2_ADC2)    /*!< ADC internal channel connected to DAC1 channel 2, channel specific to ADC2 */
+#define ADC_CHANNEL_DAC1CH1_ADC2           (LL_ADC_CHANNEL_DAC1CH1_ADC2)   /*!< Internal channel DAC1 channel 1,
+                                           channel specific to ADC2 */
+#define ADC_CHANNEL_DAC1CH2_ADC2           (LL_ADC_CHANNEL_DAC1CH2_ADC2)   /*!< Internal channel DAC1 channel 2,
+                                           channel specific to ADC2 */
 #if defined(ADC3)
-#define ADC_CHANNEL_DAC1CH1_ADC3           (LL_ADC_CHANNEL_DAC1CH1_ADC3)    /*!< ADC internal channel connected to DAC1 channel 1, channel specific to ADC3 */
-#define ADC_CHANNEL_DAC1CH2_ADC3           (LL_ADC_CHANNEL_DAC1CH2_ADC3)    /*!< ADC internal channel connected to DAC1 channel 2, channel specific to ADC3 */
+#define ADC_CHANNEL_DAC1CH1_ADC3           (LL_ADC_CHANNEL_DAC1CH1_ADC3)   /*!< Internal channel DAC1 channel 1,
+                                           channel specific to ADC3 */
+#define ADC_CHANNEL_DAC1CH2_ADC3           (LL_ADC_CHANNEL_DAC1CH2_ADC3)   /*!< Internal channel DAC1 channel 2,
+                                           channel specific to ADC3 */
 #endif /* ADC3 */
 #endif /* ADC1 && !ADC2 */
 /**
   * @}
   */
 
-/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number
+/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - ADC analog watchdog (AWD) number
   * @{
   */
 #define ADC_ANALOGWATCHDOG_1               (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */
@@ -635,16 +792,23 @@
   * @}
   */
 
-/** @defgroup ADC_analog_watchdog_mode ADC Analog Watchdog Mode
+/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog (AWD) mode
   * @{
   */
-#define ADC_ANALOGWATCHDOG_NONE                 (0x00000000UL)                                          /*!< No analog watchdog selected                                             */
-#define ADC_ANALOGWATCHDOG_SINGLE_REG           (ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN)                    /*!< Analog watchdog applied to a regular group single channel               */
-#define ADC_ANALOGWATCHDOG_SINGLE_INJEC         (ADC_CFGR_AWD1SGL | ADC_CFGR_JAWD1EN)                   /*!< Analog watchdog applied to an injected group single channel             */
-#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC      (ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN) /*!< Analog watchdog applied to a regular and injected groups single channel */
-#define ADC_ANALOGWATCHDOG_ALL_REG              (ADC_CFGR_AWD1EN)                                       /*!< Analog watchdog applied to regular group all channels                   */
-#define ADC_ANALOGWATCHDOG_ALL_INJEC            (ADC_CFGR_JAWD1EN)                                      /*!< Analog watchdog applied to injected group all channels                  */
-#define ADC_ANALOGWATCHDOG_ALL_REGINJEC         (ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN)                    /*!< Analog watchdog applied to regular and injected groups all channels     */
+#define ADC_ANALOGWATCHDOG_NONE                 (0x00000000UL)                         /*!< ADC AWD not selected */
+#define ADC_ANALOGWATCHDOG_SINGLE_REG           (ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN)   /*!< ADC AWD applied to a regular
+                                                group single channel */
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC         (ADC_CFGR_AWD1SGL | ADC_CFGR_JAWD1EN)  /*!< ADC AWD applied to an
+                                                injected group single channel */
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC      (ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN\
+                                                 | ADC_CFGR_JAWD1EN)                    /*!< ADC AWD applied to a regular
+                                                and injected groups single channel */
+#define ADC_ANALOGWATCHDOG_ALL_REG              (ADC_CFGR_AWD1EN)                      /*!< ADC AWD applied to regular
+                                                group all channels */
+#define ADC_ANALOGWATCHDOG_ALL_INJEC            (ADC_CFGR_JAWD1EN)                     /*!< ADC AWD applied to injected
+                                                group all channels */
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC         (ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN)   /*!< ADC AWD applied to regular
+                                                and injected groups all channels */
 /**
   * @}
   */
@@ -652,14 +816,18 @@
 /** @defgroup ADC_HAL_EC_OVS_RATIO  Oversampling - Ratio
   * @{
   */
-#define ADC_OVERSAMPLING_RATIO_2           (LL_ADC_OVS_RATIO_2)   /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_4           (LL_ADC_OVS_RATIO_4)   /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_8           (LL_ADC_OVS_RATIO_8)   /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_16          (LL_ADC_OVS_RATIO_16)  /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_32          (LL_ADC_OVS_RATIO_32)  /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_64          (LL_ADC_OVS_RATIO_64)  /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_128         (LL_ADC_OVS_RATIO_128) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define ADC_OVERSAMPLING_RATIO_256         (LL_ADC_OVS_RATIO_256) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
+/**
+  * @note The oversampling ratio is the number of ADC conversions performed, sum of these conversions data is computed
+  *       to result as the ADC oversampling conversion data (before potential shift)
+  */
+#define ADC_OVERSAMPLING_RATIO_2           (LL_ADC_OVS_RATIO_2)    /*!< ADC oversampling ratio    2 */
+#define ADC_OVERSAMPLING_RATIO_4           (LL_ADC_OVS_RATIO_4)    /*!< ADC oversampling ratio    4 */
+#define ADC_OVERSAMPLING_RATIO_8           (LL_ADC_OVS_RATIO_8)    /*!< ADC oversampling ratio    8 */
+#define ADC_OVERSAMPLING_RATIO_16          (LL_ADC_OVS_RATIO_16)   /*!< ADC oversampling ratio   16 */
+#define ADC_OVERSAMPLING_RATIO_32          (LL_ADC_OVS_RATIO_32)   /*!< ADC oversampling ratio   32 */
+#define ADC_OVERSAMPLING_RATIO_64          (LL_ADC_OVS_RATIO_64)   /*!< ADC oversampling ratio   64 */
+#define ADC_OVERSAMPLING_RATIO_128         (LL_ADC_OVS_RATIO_128)  /*!< ADC oversampling ratio  128 */
+#define ADC_OVERSAMPLING_RATIO_256         (LL_ADC_OVS_RATIO_256)  /*!< ADC oversampling ratio  256 */
 /**
   * @}
   */
@@ -667,15 +835,19 @@
 /** @defgroup ADC_HAL_EC_OVS_SHIFT  Oversampling - Data shift
   * @{
   */
-#define ADC_RIGHTBITSHIFT_NONE             (LL_ADC_OVS_SHIFT_NONE)    /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_1                (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_2                (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_3                (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_4                (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_5                (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_6                (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_7                (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */
-#define ADC_RIGHTBITSHIFT_8                (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */
+/**
+  * @note The sum of the ADC conversions data is divided by "Rightbitshift" number to result as the ADC oversampling
+  *       conversion data)
+  */
+#define ADC_RIGHTBITSHIFT_NONE             (LL_ADC_OVS_SHIFT_NONE)    /*!< ADC oversampling no shift   */
+#define ADC_RIGHTBITSHIFT_1                (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling right shift of 1 ranks */
+#define ADC_RIGHTBITSHIFT_2                (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling right shift of 2 ranks */
+#define ADC_RIGHTBITSHIFT_3                (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling right shift of 3 ranks */
+#define ADC_RIGHTBITSHIFT_4                (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling right shift of 4 ranks */
+#define ADC_RIGHTBITSHIFT_5                (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling right shift of 5 ranks */
+#define ADC_RIGHTBITSHIFT_6                (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling right shift of 6 ranks */
+#define ADC_RIGHTBITSHIFT_7                (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling right shift of 7 ranks */
+#define ADC_RIGHTBITSHIFT_8                (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling right shift of 8 ranks */
 /**
   * @}
   */
@@ -683,8 +855,10 @@
 /** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE  Oversampling - Discontinuous mode
   * @{
   */
-#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER   (LL_ADC_OVS_REG_CONT)          /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */
-#define ADC_TRIGGEREDMODE_MULTI_TRIGGER    (LL_ADC_OVS_REG_DISCONT)       /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */
+#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER   (LL_ADC_OVS_REG_CONT)          /*!< ADC oversampling discontinuous mode:
+                                           continuous mode (all conversions of OVS ratio are done from 1 trigger) */
+#define ADC_TRIGGEREDMODE_MULTI_TRIGGER    (LL_ADC_OVS_REG_DISCONT)       /*!< ADC oversampling discontinuous mode:
+                                           discontinuous mode (each conversion of OVS ratio needs a trigger) */
 /**
   * @}
   */
@@ -692,8 +866,10 @@
 /** @defgroup ADC_HAL_EC_OVS_SCOPE_REG  Oversampling - Oversampling scope for ADC group regular
   * @{
   */
-#define ADC_REGOVERSAMPLING_CONTINUED_MODE    (LL_ADC_OVS_GRP_REGULAR_CONTINUED) /*!< Oversampling buffer maintained during injection sequence */
-#define ADC_REGOVERSAMPLING_RESUMED_MODE      (LL_ADC_OVS_GRP_REGULAR_RESUMED)   /*!< Oversampling buffer zeroed during injection sequence     */
+#define ADC_REGOVERSAMPLING_CONTINUED_MODE (LL_ADC_OVS_GRP_REGULAR_CONTINUED) /*!< Oversampling buffer maintained
+                                           during injection sequence */
+#define ADC_REGOVERSAMPLING_RESUMED_MODE   (LL_ADC_OVS_GRP_REGULAR_RESUMED)   /*!< Oversampling buffer zeroed during
+                                           injection sequence */
 /**
   * @}
   */
@@ -701,16 +877,21 @@
 /** @defgroup ADC_Event_type ADC Event type
   * @{
   */
+/**
+  * @note Analog watchdog 1 is available on all stm32 series
+  *       Analog watchdog 2 and 3 are not available on all series
+  */
 #define ADC_EOSMP_EVENT          (ADC_FLAG_EOSMP) /*!< ADC End of Sampling event */
-#define ADC_AWD1_EVENT           (ADC_FLAG_AWD1)  /*!< ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 series) */
-#define ADC_AWD2_EVENT           (ADC_FLAG_AWD2)  /*!< ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 series) */
-#define ADC_AWD3_EVENT           (ADC_FLAG_AWD3)  /*!< ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 series) */
+#define ADC_AWD1_EVENT           (ADC_FLAG_AWD1)  /*!< ADC Analog watchdog 1 event (main analog watchdog)       */
+#define ADC_AWD2_EVENT           (ADC_FLAG_AWD2)  /*!< ADC Analog watchdog 2 event (additional analog watchdog) */
+#define ADC_AWD3_EVENT           (ADC_FLAG_AWD3)  /*!< ADC Analog watchdog 3 event (additional analog watchdog) */
 #define ADC_OVR_EVENT            (ADC_FLAG_OVR)   /*!< ADC overrun event */
 #define ADC_JQOVF_EVENT          (ADC_FLAG_JQOVF) /*!< ADC Injected Context Queue Overflow event */
 /**
   * @}
   */
-#define ADC_AWD_EVENT            ADC_AWD1_EVENT      /*!< ADC Analog watchdog 1 event: Naming for compatibility with other STM32 devices having only one analog watchdog */
+#define ADC_AWD_EVENT            ADC_AWD1_EVENT      /*!< ADC Analog watchdog 1 event: Naming for compatibility
+                                                          with other STM32 devices having only one analog watchdog */
 
 /** @defgroup ADC_interrupts_definition ADC interrupts definition
   * @{
@@ -723,11 +904,14 @@
 #define ADC_IT_JEOC          ADC_IER_JEOCIE     /*!< ADC End of injected conversion interrupt source */
 #define ADC_IT_JEOS          ADC_IER_JEOSIE     /*!< ADC End of injected sequence of conversions interrupt source */
 #define ADC_IT_AWD1          ADC_IER_AWD1IE     /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */
-#define ADC_IT_AWD2          ADC_IER_AWD2IE     /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog) */
-#define ADC_IT_AWD3          ADC_IER_AWD3IE     /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog) */
+#define ADC_IT_AWD2          ADC_IER_AWD2IE     /*!< ADC Analog watchdog 2 interrupt source (additional analog
+                             watchdog) */
+#define ADC_IT_AWD3          ADC_IER_AWD3IE     /*!< ADC Analog watchdog 3 interrupt source (additional analog
+                             watchdog) */
 #define ADC_IT_JQOVF         ADC_IER_JQOVFIE    /*!< ADC Injected Context Queue Overflow interrupt source */
 
-#define ADC_IT_AWD           ADC_IT_AWD1        /*!< ADC Analog watchdog 1 interrupt source: naming for compatibility with other STM32 devices having only one analog watchdog */
+#define ADC_IT_AWD           ADC_IT_AWD1        /*!< Analog watchdog 1 interrupt source: naming for compatibility
+                                                     with other STM32 series having only one analog watchdog   */
 
 /**
   * @}
@@ -748,7 +932,8 @@
 #define ADC_FLAG_AWD3          ADC_ISR_AWD3     /*!< ADC Analog watchdog 3 flag (additional analog watchdog) */
 #define ADC_FLAG_JQOVF         ADC_ISR_JQOVF    /*!< ADC Injected Context Queue Overflow flag */
 
-#define ADC_FLAG_AWD           ADC_FLAG_AWD1    /*!< ADC Analog watchdog 1 flag: Naming for compatibility with other STM32 devices having only one analog watchdog */
+#define ADC_FLAG_AWD           ADC_FLAG_AWD1    /*!< ADC Analog watchdog 1 flag: Naming for compatibility with other
+                                                     STM32 series having only one analog watchdog */
 
 #define ADC_FLAG_ALL    (ADC_FLAG_RDY | ADC_FLAG_EOSMP | ADC_FLAG_EOC | ADC_FLAG_EOS |  \
                          ADC_FLAG_JEOC | ADC_FLAG_JEOS | ADC_FLAG_OVR | ADC_FLAG_AWD1 | \
@@ -829,7 +1014,8 @@
 /**
   * @brief Verify the length of the scheduled regular conversions group.
   * @param __LENGTH__ number of programmed conversions.
-  * @retval SET (__LENGTH__ is within the maximum number of possible programmable regular conversions) or RESET (__LENGTH__ is null or too large)
+  * @retval SET (__LENGTH__ is within the maximum number of possible programmable regular conversions)
+  *         or RESET (__LENGTH__ is null or too large)
   */
 #define IS_ADC_REGULAR_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1UL)) && ((__LENGTH__) <= (16UL)))
 
@@ -837,7 +1023,8 @@
 /**
   * @brief Verify the number of scheduled regular conversions in discontinuous mode.
   * @param NUMBER number of scheduled regular conversions in discontinuous mode.
-  * @retval SET (NUMBER is within the maximum number of regular conversions in discontinuous mode) or RESET (NUMBER is null or too large)
+  * @retval SET (NUMBER is within the maximum number of regular conversions in discontinuous mode)
+  *         or RESET (NUMBER is null or too large)
   */
 #define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= (1UL)) && ((NUMBER) <= (8UL)))
 
@@ -1261,7 +1448,8 @@
   *         (5) On STM32L4, parameter available on devices with only 1 ADC instance.\n
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
-  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n
+  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to
+  *             4.21 Ms/s)).\n
   *         (1, 2, 3, 4) For ADC channel read back from ADC register,
   *                      comparison with internal channel parameter to be done
   *                      using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
@@ -1324,7 +1512,8 @@
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
   *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).
-  * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin).
+  * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel
+  *         connected to a GPIO pin).
   *         Value "1" if the channel corresponds to a parameter definition of a ADC internal channel.
   */
 #define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__)                             \
@@ -1668,11 +1857,15 @@
   * @note   ADC measurement data must correspond to a resolution of 12bits
   *         (full scale digital value 4095). If not the case, the data must be
   *         preliminarily rescaled to an equivalent resolution of 12 bits.
-  * @param  __TEMPSENSOR_TYP_AVGSLOPE__   Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius).
-  *                                       On STM32L4, refer to device datasheet parameter "Avg_Slope".
-  * @param  __TEMPSENSOR_TYP_CALX_V__     Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV).
-  *                                       On STM32L4, refer to device datasheet parameter "V30" (corresponding to TS_CAL1).
-  * @param  __TEMPSENSOR_CALX_TEMP__      Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV)
+  * @param  __TEMPSENSOR_TYP_AVGSLOPE__    Device datasheet data: Temperature sensor slope typical value
+                                           (unit: uV/DegCelsius).
+  *                                        On STM32L4, refer to device datasheet parameter "Avg_Slope".
+  * @param  __TEMPSENSOR_TYP_CALX_V__      Device datasheet data: Temperature sensor voltage typical value (at
+                                           temperature and Vref+ defined in parameters below) (unit: mV).
+  *                                        On STM32L4, refer to device datasheet parameter "V30"
+                                           (corresponding to TS_CAL1).
+  * @param  __TEMPSENSOR_CALX_TEMP__      Device datasheet data: Temperature at which temperature sensor voltage (see
+                                                                 parameter above) is corresponding (unit: mV)
   * @param  __VREFANALOG_VOLTAGE__        Analog voltage reference (Vref+) voltage (unit: mV)
   * @param  __TEMPSENSOR_ADC_DATA__       ADC conversion data of internal temperature sensor (unit: digital value).
   * @param  __ADC_RESOLUTION__            ADC resolution at which internal temperature sensor voltage has been measured.
@@ -1753,7 +1946,7 @@
 HAL_StatusTypeDef       HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc);
 
 /* ADC retrieve conversion value intended to be used with polling or interruption */
-uint32_t                HAL_ADC_GetValue(ADC_HandleTypeDef *hadc);
+uint32_t                HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc);
 
 /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
 void                    HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc);
@@ -1770,8 +1963,9 @@
   * @{
   */
 /* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef       HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig);
-HAL_StatusTypeDef       HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig);
+HAL_StatusTypeDef       HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *pConfig);
+HAL_StatusTypeDef       HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc,
+                                                const ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig);
 
 /**
   * @}
@@ -1781,8 +1975,8 @@
 /** @addtogroup ADC_Exported_Functions_Group4
   * @{
   */
-uint32_t                HAL_ADC_GetState(ADC_HandleTypeDef *hadc);
-uint32_t                HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+uint32_t                HAL_ADC_GetState(const ADC_HandleTypeDef *hadc);
+uint32_t                HAL_ADC_GetError(const ADC_HandleTypeDef *hadc);
 
 /**
   * @}
@@ -1792,7 +1986,7 @@
   * @}
   */
 
-/* Private functions -----------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
 /** @addtogroup ADC_Private_Functions ADC Private Functions
   * @{
   */
diff --git a/Inc/stm32l4xx_hal_adc_ex.h b/Inc/stm32l4xx_hal_adc_ex.h
index 996ce0d..9d59749 100644
--- a/Inc/stm32l4xx_hal_adc_ex.h
+++ b/Inc/stm32l4xx_hal_adc_ex.h
@@ -55,125 +55,190 @@
 /**
   * @brief  Structure definition of ADC group injected and ADC channel affected to ADC group injected
   * @note   Parameters of this structure are shared within 2 scopes:
-  *          - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff, InjectedOffsetNumber, InjectedOffset
-  *          - Scope ADC group injected (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
-  *            AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConv, ExternalTrigInjecConvEdge, InjecOversamplingMode, InjecOversampling.
+  *          - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff,
+  *            InjectedOffsetNumber, InjectedOffset
+  *          - Scope ADC group injected (affects all channels of injected group): InjectedNbrOfConversion,
+  *            InjectedDiscontinuousConvMode,
+  *            AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConv, ExternalTrigInjecConvEdge,
+  *            InjecOversamplingMode, InjecOversampling.
   * @note   The setting of these parameters by function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
   *         ADC state can be either:
-  *          - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'InjectedSingleDiff')
-  *          - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext', 'InjecOversampling': ADC enabled without conversion on going on injected group.
-  *          - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'AutoInjectedConv': ADC enabled without conversion on going on regular and injected groups.
-  *          - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv', 'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going
+  *          - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter
+  *            'InjectedSingleDiff')
+  *          - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext', 'InjecOversampling': ADC enabled
+  *            without conversion on going on injected group.
+  *          - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'AutoInjectedConv':
+  *            ADC enabled without conversion on going on regular and injected groups.
+  *          - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv',
+  *            'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going
   *            on ADC groups regular and injected.
   *         If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
-  *         without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+  *         without error reporting (as it can be the expected behavior in case of intended action to update another
+  *         parameter (which fulfills the ADC state condition) on the fly).
   */
 typedef struct
 {
   uint32_t InjectedChannel;               /*!< Specifies the channel to configure into ADC group injected.
                                                This parameter can be a value of @ref ADC_HAL_EC_CHANNEL
-                                               Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */
+                                               Note: Depending on devices and ADC instances, some channels may not be
+                                                     available on device package pins. Refer to device datasheet for
+                                                     channels availability. */
 
   uint32_t InjectedRank;                  /*!< Specifies the rank in the ADC group injected sequencer.
                                                This parameter must be a value of @ref ADC_INJ_SEQ_RANKS.
-                                               Note: to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by
-                                               the new channel setting (or parameter number of conversions adjusted) */
+                                               Note: to disable a channel or change order of conversion sequencer,
+                                                     rank containing a previous channel setting can be overwritten by
+                                                     the new channel setting (or parameter number of conversions
+                                                     adjusted) */
 
   uint32_t InjectedSamplingTime;          /*!< Sampling time value to be set for the selected channel.
                                                Unit: ADC clock cycles.
                                                Conversion time is the addition of sampling time and processing time
-                                               (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+                                               (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits,
+                                               8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
                                                This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME.
-                                               Caution: This parameter applies to a channel that can be used in a regular and/or injected group.
-                                                        It overwrites the last setting.
-                                               Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
-                                                     sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
-                                                     Refer to device datasheet for timings values. */
+                                               Caution: This parameter applies to a channel that can be used in a
+                                                        regular and/or injected group. It overwrites the last setting.
+                                               Note: In case of usage of internal measurement channels (VrefInt, ...),
+                                                     sampling time constraints must be respected (sampling time can be
+                                                     adjusted in function of ADC clock frequency and sampling time
+                                                     setting). Refer to device datasheet for timings values. */
 
   uint32_t InjectedSingleDiff;            /*!< Selection of single-ended or differential input.
-                                               In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input).
-                                               Only channel 'i' has to be configured, channel 'i+1' is configured automatically.
-                                               This parameter must be a value of @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING.
-                                               Caution: This parameter applies to a channel that can be used in a regular and/or injected group.
-                                                        It overwrites the last setting.
-                                               Note: Refer to Reference Manual to ensure the selected channel is available in differential mode.
-                                               Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is not usable separately.
-                                               Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
-                                               If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behavior in case
-                                               of another parameter update on the fly) */
+                                               In differential mode: Differential measurement is between the selected
+                                               channel 'i' (positive input) and channel 'i+1' (negative input).
+                                               Only channel 'i' has to be configured, channel 'i+1' is configured
+                                               automatically.
+                                               This parameter must be a value of
+                                               @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING.
+                                               Caution: This parameter applies to a channel that can be used in a
+                                               regular and/or injected group. It overwrites the last setting.
+                                               Note: Refer to Reference Manual to ensure the selected channel is
+                                                     available in differential mode.
+                                               Note: When configuring a channel 'i' in differential mode, the channel
+                                                     'i+1' is not usable separately.
+                                               Note: This parameter must be modified when ADC is disabled (before ADC
+                                                     start conversion or after ADC stop conversion).
+                                               If ADC is enabled, this parameter setting is bypassed without error
+                                               reporting (as it can be the expected behavior in case of another
+                                               parameter update on the fly) */
 
   uint32_t InjectedOffsetNumber;          /*!< Selects the offset number.
                                                This parameter can be a value of @ref ADC_HAL_EC_OFFSET_NB.
-                                               Caution: Only one offset is allowed per channel. This parameter overwrites the last setting. */
+                                               Caution: Only one offset is allowed per channel. This parameter
+                                                        overwrites the last setting. */
 
   uint32_t InjectedOffset;                /*!< Defines the offset to be subtracted from the raw converted data.
                                                Offset value must be a positive number.
-                                               Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number
-                                               between Min_Data = 0x000 and Max_Data = 0xFFF,  0x3FF, 0xFF or 0x3F respectively.
-                                               Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled
-                                               without continuous mode or external trigger that could launch a conversion). */
+                                               Depending of ADC resolution selected (12, 10, 8 or 6 bits), this
+                                               parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF,
+                                               0x3FF, 0xFF or 0x3F respectively.
+                                               Note: This parameter must be modified when no conversion is on going
+                                                     on both regular and injected groups (ADC disabled, or ADC enabled
+                                                     without continuous mode or external trigger that could launch a
+                                                     conversion). */
 
-  uint32_t InjectedNbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the ADC group injected sequencer.
-                                               To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+  uint32_t InjectedNbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the ADC group
+                                               injected sequencer.
+                                               To use the injected group sequencer and convert several ranks, parameter
+                                               'ScanConvMode' must be enabled.
                                                This parameter must be a number between Min_Data = 1 and Max_Data = 4.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+                                               Caution: this setting impacts the entire injected group. Therefore,
+                                               call of HAL_ADCEx_InjectedConfigChannel() to configure a channel on
+                                               injected group can impact the configuration of other channels previously
+                                               set. */
 
-  FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of ADC group injected is performed in Complete-sequence/Discontinuous-sequence
+  FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of ADC group injected
+                                               is performed in Complete-sequence/Discontinuous-sequence
                                                (main sequence subdivided in successive parts).
-                                               Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                               Discontinuous mode is used only if sequencer is enabled (parameter
+                                               'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
                                                Discontinuous mode can be enabled only if continuous mode is disabled.
                                                This parameter can be set to ENABLE or DISABLE.
-                                               Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
-                                               Note: For injected group, discontinuous mode converts the sequence channel by channel (discontinuous length fixed to 1 rank).
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+                                               Note: This parameter must be modified when ADC is disabled (before ADC
+                                               start conversion or after ADC stop conversion).
+                                               Note: For injected group, discontinuous mode converts the sequence
+                                               channel by channel (discontinuous length fixed to 1 rank).
+                                               Caution: this setting impacts the entire injected group. Therefore,
+                                                        call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the
+                                                        configuration of other channels previously set. */
 
-  FunctionalState AutoInjectedConv;       /*!< Enables or disables the selected ADC group injected automatic conversion after regular one
+  FunctionalState AutoInjectedConv;       /*!< Enables or disables the selected ADC group injected automatic conversion
+                                               after regular one
                                                This parameter can be set to ENABLE or DISABLE.
-                                               Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
-                                               Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_INJECTED_SOFTWARE_START)
-                                               Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
-                                                     To maintain JAUTO always enabled, DMA must be configured in circular mode.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+                                               Note: To use Automatic injected conversion, discontinuous mode must
+                                                     be disabled ('DiscontinuousConvMode' and
+                                                     'InjectedDiscontinuousConvMode' set to DISABLE)
+                                               Note: To use Automatic injected conversion, injected group external
+                                                     triggers must be disabled ('ExternalTrigInjecConv' set to
+                                                     ADC_INJECTED_SOFTWARE_START)
+                                               Note: In case of DMA used with regular group: if DMA configured in
+                                                     normal mode (single shot) JAUTO will be stopped upon DMA transfer
+                                                     complete.
+                                                     To maintain JAUTO always enabled, DMA must be configured in
+                                                     circular mode.
+                                               Caution: this setting impacts the entire injected group. Therefore,
+                                                        call of HAL_ADCEx_InjectedConfigChannel() to configure a channel
+                                                        on injected group can impact the configuration of other channels
+                                                        previously set. */
 
   FunctionalState QueueInjectedContext;   /*!< Specifies whether the context queue feature is enabled.
                                                This parameter can be set to ENABLE or DISABLE.
-                                               If context queue is enabled, injected sequencer&channels configurations are queued on up to 2 contexts. If a
-                                               new injected context is set when queue is full, error is triggered by interruption and through function
+                                               If context queue is enabled, injected sequencer&channels configurations
+                                               are queued on up to 2 contexts. If a
+                                               new injected context is set when queue is full, error is triggered by
+                                               interruption and through function
                                                'HAL_ADCEx_InjectedQueueOverflowCallback'.
-                                               Caution: This feature request that the sequence is fully configured before injected conversion start.
-                                                        Therefore, configure channels with as many calls to HAL_ADCEx_InjectedConfigChannel() as the 'InjectedNbrOfConversion' parameter.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set.
-                                               Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). */
+                                               Caution: This feature request that the sequence is fully configured
+                                                        before injected conversion start.
+                                                        Therefore, configure channels with as many calls to
+                                                        HAL_ADCEx_InjectedConfigChannel() as the
+                                                        'InjectedNbrOfConversion' parameter.
+                                               Caution: this setting impacts the entire injected group. Therefore,
+                                                        call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the
+                                                        configuration of other channels previously set.
+                                               Note: This parameter must be modified when ADC is disabled (before ADC
+                                                     start conversion or after ADC stop conversion). */
 
-  uint32_t ExternalTrigInjecConv;         /*!< Selects the external event used to trigger the conversion start of injected group.
-                                               If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled and software trigger is used instead.
-                                               This parameter can be a value of @ref ADC_injected_external_trigger_source.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConv;         /*!< Selects the external event used to trigger the conversion start of
+                                               injected group.
+                                               If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled
+                                               and software trigger is used instead.
+                                               This parameter can be a value of
+                                               @ref ADC_injected_external_trigger_source.
+                                               Caution: this setting impacts the entire injected group. Therefore,
+                                                        call of HAL_ADCEx_InjectedConfigChannel() to configure a channel
+                                                        on injected group can impact the configuration of other channels
+                                                        previously set. */
 
   uint32_t ExternalTrigInjecConvEdge;     /*!< Selects the external trigger edge of injected group.
                                                This parameter can be a value of @ref ADC_injected_external_trigger_edge.
-                                               If trigger source is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+                                               If trigger source is set to ADC_INJECTED_SOFTWARE_START, this parameter
+                                               is discarded.
+                                               Caution: this setting impacts the entire injected group. Therefore,
+                                                        call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the
+                                                        configuration of other channels previously set. */
 
   FunctionalState InjecOversamplingMode;         /*!< Specifies whether the oversampling feature is enabled or disabled.
                                                       This parameter can be set to ENABLE or DISABLE.
-                                                      Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */
+                                                      Note: This parameter can be modified only if there is no
+                                                      conversion is ongoing (both ADSTART and JADSTART cleared). */
 
   ADC_InjOversamplingTypeDef  InjecOversampling; /*!< Specifies the Oversampling parameters.
-                                                      Caution: this setting overwrites the previous oversampling configuration if oversampling already enabled.
-                                                      Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */
+                                                      Caution: this setting overwrites the previous oversampling
+                                                               configuration if oversampling already enabled.
+                                                      Note: This parameter can be modified only if there is no
+                                                            conversion is ongoing (both ADSTART and JADSTART cleared).*/
 } ADC_InjectionConfTypeDef;
 
 #if defined(ADC_MULTIMODE_SUPPORT)
 /**
   * @brief  Structure definition of ADC multimode
-  * @note   The setting of these parameters by function HAL_ADCEx_MultiModeConfigChannel() is conditioned by ADCs state (both Master and Slave ADCs).
+  * @note   The setting of these parameters by function HAL_ADCEx_MultiModeConfigChannel() is conditioned by ADCs state
+  *         (both Master and Slave ADCs).
   *         Both Master and Slave ADCs must be disabled.
   */
 typedef struct
@@ -182,7 +247,8 @@
                                    This parameter can be a value of @ref ADC_HAL_EC_MULTI_MODE. */
 
   uint32_t DMAAccessMode;     /*!< Configures the DMA mode for multimode ADC:
-                                   selection whether 2 DMA channels (each ADC uses its own DMA channel) or 1 DMA channel (one DMA channel for both ADC, DMA of ADC master)
+                                   selection whether 2 DMA channels (each ADC uses its own DMA channel) or 1 DMA channel
+                                   (one DMA channel for both ADC, DMA of ADC master).
                                    This parameter can be a value of @ref ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION. */
 
   uint32_t TwoSamplingDelay;  /*!< Configures the Delay between 2 sampling phases.
@@ -207,23 +273,40 @@
   * @{
   */
 /* ADC group regular trigger sources for all ADC instances */
-#define ADC_INJECTED_SOFTWARE_START        (LL_ADC_INJ_TRIG_SOFTWARE)            /*!< Software triggers injected group conversion start */
-#define ADC_EXTERNALTRIGINJEC_T1_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)       /*!< ADC group injected conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T1_TRGO2     (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2)      /*!< ADC group injected conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T1_CC4       (LL_ADC_INJ_TRIG_EXT_TIM1_CH4)        /*!< ADC group injected conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T2_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM2_TRGO)       /*!< ADC group injected conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T2_CC1       (LL_ADC_INJ_TRIG_EXT_TIM2_CH1)        /*!< ADC group injected conversion trigger from external peripheral: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T3_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM3_TRGO)       /*!< ADC group injected conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T3_CC1       (LL_ADC_INJ_TRIG_EXT_TIM3_CH1)        /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T3_CC3       (LL_ADC_INJ_TRIG_EXT_TIM3_CH3)        /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T3_CC4       (LL_ADC_INJ_TRIG_EXT_TIM3_CH4)        /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T4_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM4_TRGO)       /*!< ADC group injected conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T6_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM6_TRGO)       /*!< ADC group injected conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T8_CC4       (LL_ADC_INJ_TRIG_EXT_TIM8_CH4)        /*!< ADC group injected conversion trigger from external peripheral: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T8_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO)       /*!< ADC group injected conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T8_TRGO2     (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO2)      /*!< ADC group injected conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_T15_TRGO     (LL_ADC_INJ_TRIG_EXT_TIM15_TRGO)      /*!< ADC group injected conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#define ADC_EXTERNALTRIGINJEC_EXT_IT15     (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15)     /*!< ADC group injected conversion trigger from external peripheral: external interrupt line 15. Trigger edge set to rising edge (default setting). */
+#define ADC_INJECTED_SOFTWARE_START        (LL_ADC_INJ_TRIG_SOFTWARE)            /*!< ADC group injected conversion
+                                           trigger software start */
+#define ADC_EXTERNALTRIGINJEC_T1_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)       /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM1 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_T1_TRGO2     (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2)      /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM1 TRGO2. */
+#define ADC_EXTERNALTRIGINJEC_T1_CC4       (LL_ADC_INJ_TRIG_EXT_TIM1_CH4)        /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM1 channel 4 event (capture compare). */
+#define ADC_EXTERNALTRIGINJEC_T2_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM2_TRGO)       /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM2 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_T2_CC1       (LL_ADC_INJ_TRIG_EXT_TIM2_CH1)        /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM2 channel 1 event (capture compare). */
+#define ADC_EXTERNALTRIGINJEC_T3_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM3_TRGO)       /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM3 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_T3_CC1       (LL_ADC_INJ_TRIG_EXT_TIM3_CH1)        /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM3 channel 1 event (capture compare). */
+#define ADC_EXTERNALTRIGINJEC_T3_CC3       (LL_ADC_INJ_TRIG_EXT_TIM3_CH3)        /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM3 channel 3 event (capture compare). */
+#define ADC_EXTERNALTRIGINJEC_T3_CC4       (LL_ADC_INJ_TRIG_EXT_TIM3_CH4)        /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM3 channel 4 event (capture compare). */
+#define ADC_EXTERNALTRIGINJEC_T4_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM4_TRGO)       /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM4 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_T6_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM6_TRGO)       /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM6 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_T8_CC4       (LL_ADC_INJ_TRIG_EXT_TIM8_CH4)        /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM8 channel 4 event (capture compare). */
+#define ADC_EXTERNALTRIGINJEC_T8_TRGO      (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO)       /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM8 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_T8_TRGO2     (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO2)      /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM8 TRGO2. */
+#define ADC_EXTERNALTRIGINJEC_T15_TRGO     (LL_ADC_INJ_TRIG_EXT_TIM15_TRGO)      /*!< ADC group injected conversion
+                                           trigger from external peripheral: TIM15 TRGO. */
+#define ADC_EXTERNALTRIGINJEC_EXT_IT15     (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15)     /*!< ADC group injected conversion
+                                           trigger from external peripheral: external interrupt line 15. */
 /**
   * @}
   */
@@ -231,10 +314,14 @@
 /** @defgroup ADC_injected_external_trigger_edge ADC group injected trigger edge (when external trigger is selected)
   * @{
   */
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE           (0x00000000UL)        /*!< Injected conversions hardware trigger detection disabled                             */
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING         (ADC_JSQR_JEXTEN_0)   /*!< Injected conversions hardware trigger detection on the rising edge                   */
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING        (ADC_JSQR_JEXTEN_1)   /*!< Injected conversions hardware trigger detection on the falling edge                  */
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING  (ADC_JSQR_JEXTEN)     /*!< Injected conversions hardware trigger detection on both the rising and falling edges */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE           (0x00000000UL)        /*!< Injected conversions trigger
+                                                      disabled (SW start)*/
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING         (ADC_JSQR_JEXTEN_0)   /*!< Injected conversions trigger
+                                                      polarity set to rising edge */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING        (ADC_JSQR_JEXTEN_1)   /*!< Injected conversions trigger
+                                                      polarity set to falling edge */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING  (ADC_JSQR_JEXTEN)     /*!< Injected conversions trigger
+                                                      polarity set to both rising and falling edges */
 /**
   * @}
   */
@@ -242,8 +329,8 @@
 /** @defgroup ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING  Channel - Single or differential ending
   * @{
   */
-#define ADC_SINGLE_ENDED                (LL_ADC_SINGLE_ENDED)         /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */
-#define ADC_DIFFERENTIAL_ENDED          (LL_ADC_DIFFERENTIAL_ENDED)   /*!< ADC channel ending set to differential (literal also used to set calibration mode) */
+#define ADC_SINGLE_ENDED                (LL_ADC_SINGLE_ENDED)         /*!< ADC channel ending set to single ended */
+#define ADC_DIFFERENTIAL_ENDED          (LL_ADC_DIFFERENTIAL_ENDED)   /*!< ADC channel ending set to differential */
 /**
   * @}
   */
@@ -251,11 +338,20 @@
 /** @defgroup ADC_HAL_EC_OFFSET_NB  ADC instance - Offset number
   * @{
   */
-#define ADC_OFFSET_NONE              (ADC_OFFSET_4 + 1U) /*!< ADC offset disabled: no offset correction for the selected ADC channel */
-#define ADC_OFFSET_1                 (LL_ADC_OFFSET_1) /*!< ADC offset number 1: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
-#define ADC_OFFSET_2                 (LL_ADC_OFFSET_2) /*!< ADC offset number 2: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
-#define ADC_OFFSET_3                 (LL_ADC_OFFSET_3) /*!< ADC offset number 3: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
-#define ADC_OFFSET_4                 (LL_ADC_OFFSET_4) /*!< ADC offset number 4: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
+#define ADC_OFFSET_NONE              (ADC_OFFSET_4 + 1U) /*!< ADC offset disabled: no offset correction for the selected
+                                     ADC channel */
+#define ADC_OFFSET_1                 (LL_ADC_OFFSET_1) /*!< ADC offset number 1: ADC channel and offset level to which
+                                     the offset programmed will be applied (independently of channel mapped
+                                     on ADC group regular or group injected) */
+#define ADC_OFFSET_2                 (LL_ADC_OFFSET_2) /*!< ADC offset number 2: ADC channel and offset level to which
+                                     the offset programmed will be applied (independently of channel mapped
+                                     on ADC group regular or group injected) */
+#define ADC_OFFSET_3                 (LL_ADC_OFFSET_3) /*!< ADC offset number 3: ADC channel and offset level to which
+                                     the offset programmed will be applied (independently of channel mapped
+                                     on ADC group regular or group injected) */
+#define ADC_OFFSET_4                 (LL_ADC_OFFSET_4) /*!< ADC offset number 4: ADC channel and offset level to which
+                                     the offset programmed will be applied (independently of channel mapped
+                                     on ADC group regular or group injected) */
 /**
   * @}
   */
@@ -275,21 +371,33 @@
 /** @defgroup ADC_HAL_EC_MULTI_MODE  Multimode - Mode
   * @{
   */
-#define ADC_MODE_INDEPENDENT               (LL_ADC_MULTI_INDEPENDENT)                                          /*!< ADC dual mode disabled (ADC independent mode) */
-#define ADC_DUALMODE_REGSIMULT             (LL_ADC_MULTI_DUAL_REG_SIMULT) /*!< ADC dual mode enabled: group regular simultaneous */
-#define ADC_DUALMODE_INTERL                (LL_ADC_MULTI_DUAL_REG_INTERL) /*!< ADC dual mode enabled: Combined group regular interleaved */
-#define ADC_DUALMODE_INJECSIMULT           (LL_ADC_MULTI_DUAL_INJ_SIMULT) /*!< ADC dual mode enabled: group injected simultaneous */
-#define ADC_DUALMODE_ALTERTRIG             (LL_ADC_MULTI_DUAL_INJ_ALTERN) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */
-#define ADC_DUALMODE_REGSIMULT_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */
-#define ADC_DUALMODE_REGSIMULT_ALTERTRIG   (LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */
-#define ADC_DUALMODE_REGINTERL_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) /*!< ADC dual mode enabled: Combined group regular interleaved + group injected simultaneous */
+#define ADC_MODE_INDEPENDENT               (LL_ADC_MULTI_INDEPENDENT)          /*!< ADC dual mode disabled
+                                           (ADC independent mode) */
+#define ADC_DUALMODE_REGSIMULT             (LL_ADC_MULTI_DUAL_REG_SIMULT)      /*!< ADC dual mode enabled: group regular
+                                           simultaneous */
+#define ADC_DUALMODE_INTERL                (LL_ADC_MULTI_DUAL_REG_INTERL)      /*!< ADC dual mode enabled: Combined
+                                           group regular interleaved */
+#define ADC_DUALMODE_INJECSIMULT           (LL_ADC_MULTI_DUAL_INJ_SIMULT)      /*!< ADC dual mode enabled: group
+                                           injected simultaneous */
+#define ADC_DUALMODE_ALTERTRIG             (LL_ADC_MULTI_DUAL_INJ_ALTERN)      /*!< ADC dual mode enabled: group
+                                           injected alternate trigger. Works only with external triggers (not internal
+                                           SW start) */
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) /*!< ADC dual mode enabled: Combined
+                                           group regular simultaneous + group injected simultaneous */
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG   (LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) /*!< ADC dual mode enabled: Combined
+                                           group regular simultaneous + group injected alternate trigger */
+#define ADC_DUALMODE_REGINTERL_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) /*!< ADC dual mode enabled: Combined
+                                           group regular interleaved + group injected simultaneous */
 
 /** @defgroup ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION  Multimode - DMA transfer mode depending on ADC resolution
   * @{
   */
-#define ADC_DMAACCESSMODE_DISABLED      (0x00000000UL)     /*!< DMA multimode disabled: each ADC uses its own DMA channel */
-#define ADC_DMAACCESSMODE_12_10_BITS    (ADC_CCR_MDMA_1)   /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 12 and 10 bits resolution */
-#define ADC_DMAACCESSMODE_8_6_BITS      (ADC_CCR_MDMA)     /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 8 and 6 bits resolution */
+#define ADC_DMAACCESSMODE_DISABLED         (0x00000000UL)     /*!< DMA multimode disabled: each ADC uses its own
+                                           DMA channel */
+#define ADC_DMAACCESSMODE_12_10_BITS       (ADC_CCR_MDMA_1)   /*!< DMA multimode enabled (one DMA channel for both ADC,
+                                           DMA of ADC master) for 12 and 10 bits resolution */
+#define ADC_DMAACCESSMODE_8_6_BITS         (ADC_CCR_MDMA)     /*!< DMA multimode enabled (one DMA channel for both ADC,
+                                           DMA of ADC master) for 8 and 6 bits resolution */
 /**
   * @}
   */
@@ -297,18 +405,30 @@
 /** @defgroup ADC_HAL_EC_MULTI_TWOSMP_DELAY  Multimode - Delay between two sampling phases
   * @{
   */
-#define ADC_TWOSAMPLINGDELAY_1CYCLE        (LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE)   /*!< ADC multimode delay between two sampling phases: 1 ADC clock cycle */
-#define ADC_TWOSAMPLINGDELAY_2CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES)  /*!< ADC multimode delay between two sampling phases: 2 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_3CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES)  /*!< ADC multimode delay between two sampling phases: 3 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_4CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES)  /*!< ADC multimode delay between two sampling phases: 4 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_5CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES)  /*!< ADC multimode delay between two sampling phases: 5 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_6CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES)  /*!< ADC multimode delay between two sampling phases: 6 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_7CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES)  /*!< ADC multimode delay between two sampling phases: 7 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_8CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES)  /*!< ADC multimode delay between two sampling phases: 8 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_9CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES)  /*!< ADC multimode delay between two sampling phases: 9 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_10CYCLES      (LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) /*!< ADC multimode delay between two sampling phases: 10 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_11CYCLES      (LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) /*!< ADC multimode delay between two sampling phases: 11 ADC clock cycles */
-#define ADC_TWOSAMPLINGDELAY_12CYCLES      (LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) /*!< ADC multimode delay between two sampling phases: 12 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_1CYCLE        (LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE)    /*!< ADC multimode delay between two
+                                           sampling phases: 1 ADC clock cycle */
+#define ADC_TWOSAMPLINGDELAY_2CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 2 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_3CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 3 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_4CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 4 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_5CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 5 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_6CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 6 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_7CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 7 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_8CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 8 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_9CYCLES       (LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES)   /*!< ADC multimode delay between two
+                                           sampling phases: 9 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_10CYCLES      (LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES)  /*!< ADC multimode delay between two
+                                           sampling phases: 10 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_11CYCLES      (LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES)  /*!< ADC multimode delay between two
+                                           sampling phases: 11 ADC clock cycles */
+#define ADC_TWOSAMPLINGDELAY_12CYCLES      (LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES)  /*!< ADC multimode delay between two
+                                           sampling phases: 12 ADC clock cycles */
 /**
   * @}
   */
@@ -321,9 +441,11 @@
 /** @defgroup ADC_HAL_EC_GROUPS  ADC instance - Groups
   * @{
   */
-#define ADC_REGULAR_GROUP                  (LL_ADC_GROUP_REGULAR)           /*!< ADC group regular (available on all STM32 devices) */
-#define ADC_INJECTED_GROUP                 (LL_ADC_GROUP_INJECTED)          /*!< ADC group injected (not available on all STM32 devices)*/
-#define ADC_REGULAR_INJECTED_GROUP         (LL_ADC_GROUP_REGULAR_INJECTED)  /*!< ADC both groups regular and injected */
+#define ADC_REGULAR_GROUP                  (LL_ADC_GROUP_REGULAR)          /*!< ADC group regular (available on
+                                                                                all STM32 devices) */
+#define ADC_INJECTED_GROUP                 (LL_ADC_GROUP_INJECTED)         /*!< ADC group injected (not available on
+                                                                                all STM32 devices) */
+#define ADC_REGULAR_INJECTED_GROUP         (LL_ADC_GROUP_REGULAR_INJECTED) /*!< ADC both groups regular and injected */
 /**
   * @}
   */
@@ -386,8 +508,12 @@
 /** @defgroup ADC_HAL_EC_REG_DFSDM_TRANSFER ADC group regular - DFSDM transfer of ADC conversion data
   * @{
   */
-#define ADC_DFSDM_MODE_DISABLE     (0x00000000UL)                     /*!< ADC conversions are not transferred by DFSDM. */
-#define ADC_DFSDM_MODE_ENABLE      (LL_ADC_REG_DFSDM_TRANSFER_ENABLE) /*!< ADC conversion data are transferred to DFSDM for post processing. The ADC conversion data format must be 16-bit signed and right aligned, refer to reference manual. DFSDM transfer cannot be used if DMA transfer is enabled. */
+#define ADC_DFSDM_MODE_DISABLE             (0x00000000UL)                     /*!< ADC conversions are not transferred
+                                           by DFSDM. */
+#define ADC_DFSDM_MODE_ENABLE              (LL_ADC_REG_DFSDM_TRANSFER_ENABLE) /*!< ADC conversion data are transferred
+                                           to DFSDM for post processing. The ADC conversion data format must be 16-bit
+                                           signed and right aligned, refer to reference manual.
+                                           DFSDM transfer cannot be used if DMA transfer is enabled. */
 /**
   * @}
   */
@@ -470,15 +596,16 @@
 #define ADC_IS_INDEPENDENT(__HANDLE__)    \
   ( ( ( ((__HANDLE__)->Instance) == ADC3) \
     )?                                    \
-    SET                                   \
-    :                                     \
-    RESET                                 \
+     SET                                  \
+     :                                    \
+     RESET                                \
   )
 #elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
 #define ADC_IS_INDEPENDENT(__HANDLE__)   (SET)
 #elif defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx)
 #define ADC_IS_INDEPENDENT(__HANDLE__)   (RESET)
-#endif /* (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) */
+#endif /* defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) ||
+          defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) */
 
 /**
   * @brief Set the selected injected Channel rank.
@@ -486,36 +613,41 @@
   * @param __RANKNB__ Rank number.
   * @retval None
   */
-#define ADC_JSQR_RK(__CHANNELNB__, __RANKNB__) ((((__CHANNELNB__)\
-                                                  & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << ((__RANKNB__) & ADC_INJ_RANK_ID_JSQR_MASK))
+#define ADC_JSQR_RK(__CHANNELNB__, __RANKNB__) \
+  ((((__CHANNELNB__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) \
+   << ((__RANKNB__) & ADC_INJ_RANK_ID_JSQR_MASK))
 
 /**
   * @brief Configure ADC injected context queue
   * @param __INJECT_CONTEXT_QUEUE_MODE__ Injected context queue mode.
   * @retval None
   */
-#define ADC_CFGR_INJECT_CONTEXT_QUEUE(__INJECT_CONTEXT_QUEUE_MODE__) ((__INJECT_CONTEXT_QUEUE_MODE__) << ADC_CFGR_JQM_Pos)
+#define ADC_CFGR_INJECT_CONTEXT_QUEUE(__INJECT_CONTEXT_QUEUE_MODE__) \
+  ((__INJECT_CONTEXT_QUEUE_MODE__) << ADC_CFGR_JQM_Pos)
 
 /**
   * @brief Configure ADC discontinuous conversion mode for injected group
   * @param __INJECT_DISCONTINUOUS_MODE__ Injected discontinuous mode.
   * @retval None
   */
-#define ADC_CFGR_INJECT_DISCCONTINUOUS(__INJECT_DISCONTINUOUS_MODE__) ((__INJECT_DISCONTINUOUS_MODE__) <<  ADC_CFGR_JDISCEN_Pos)
+#define ADC_CFGR_INJECT_DISCCONTINUOUS(__INJECT_DISCONTINUOUS_MODE__) \
+  ((__INJECT_DISCONTINUOUS_MODE__) <<  ADC_CFGR_JDISCEN_Pos)
 
 /**
   * @brief Configure ADC discontinuous conversion mode for regular group
   * @param __REG_DISCONTINUOUS_MODE__ Regular discontinuous mode.
   * @retval None
   */
-#define ADC_CFGR_REG_DISCONTINUOUS(__REG_DISCONTINUOUS_MODE__) ((__REG_DISCONTINUOUS_MODE__) << ADC_CFGR_DISCEN_Pos)
+#define ADC_CFGR_REG_DISCONTINUOUS(__REG_DISCONTINUOUS_MODE__) \
+  ((__REG_DISCONTINUOUS_MODE__) << ADC_CFGR_DISCEN_Pos)
 
 /**
   * @brief Configure the number of discontinuous conversions for regular group.
   * @param __NBR_DISCONTINUOUS_CONV__ Number of discontinuous conversions.
   * @retval None
   */
-#define ADC_CFGR_DISCONTINUOUS_NUM(__NBR_DISCONTINUOUS_CONV__) (((__NBR_DISCONTINUOUS_CONV__) - 1UL) << ADC_CFGR_DISCNUM_Pos)
+#define ADC_CFGR_DISCONTINUOUS_NUM(__NBR_DISCONTINUOUS_CONV__) \
+  (((__NBR_DISCONTINUOUS_CONV__) - 1UL) << ADC_CFGR_DISCNUM_Pos)
 
 /**
   * @brief Configure the ADC auto delay mode.
@@ -557,8 +689,8 @@
   * @param __CALIBRATION_FACTOR__ Calibration factor value.
   * @retval None
   */
-#define ADC_CALFACT_DIFF_SET(__CALIBRATION_FACTOR__) (((__CALIBRATION_FACTOR__)\
-                                                       & (ADC_CALFACT_CALFACT_D_Pos >> ADC_CALFACT_CALFACT_D_Pos) ) << ADC_CALFACT_CALFACT_D_Pos)
+#define ADC_CALFACT_DIFF_SET(__CALIBRATION_FACTOR__) \
+  (((__CALIBRATION_FACTOR__) & (ADC_CALFACT_CALFACT_D_Pos >> ADC_CALFACT_CALFACT_D_Pos) ) << ADC_CALFACT_CALFACT_D_Pos)
 
 /**
   * @brief Calibration factor in differential mode to be retrieved from calibration register.
@@ -661,12 +793,15 @@
   * @brief Set handle instance of the ADC slave associated to the ADC master.
   * @param __HANDLE_MASTER__ ADC master handle.
   * @param __HANDLE_SLAVE__ ADC slave handle.
-  * @note if __HANDLE_MASTER__ is the handle of a slave ADC or an independent ADC, __HANDLE_SLAVE__ instance is set to NULL.
+  * @note if __HANDLE_MASTER__ is the handle of a slave ADC or an independent ADC, __HANDLE_SLAVE__ instance is
+  *       set to NULL.
   * @retval None
   */
 #define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__)             \
-  ( (((__HANDLE_MASTER__)->Instance == ADC1)) ? ((__HANDLE_SLAVE__)->Instance = ADC2) : ((__HANDLE_SLAVE__)->Instance = NULL) )
-#endif /* defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
+  ( (((__HANDLE_MASTER__)->Instance == ADC1)) ? \
+    ((__HANDLE_SLAVE__)->Instance = ADC2) : ((__HANDLE_SLAVE__)->Instance = NULL) )
+#endif /* defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L471xx) || defined (STM32L475xx) ||
+          defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
 
 
 /**
@@ -681,7 +816,11 @@
 /*  The temperature sensor measurement path (channel 17) is available on ADC1 and ADC3 */
 #define ADC_TEMPERATURE_SENSOR_INSTANCE(__HANDLE__)  ((((__HANDLE__)->Instance) == ADC1)\
                                                       || (((__HANDLE__)->Instance) == ADC3))
-#endif /* (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */
+#endif /* defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) ||
+          defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) ||
+          defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) ||
+          defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) ||
+          defined (STM32L4S7xx) || defined (STM32L4S9xx) */
 
 /**
   * @brief Verify the ADC instance connected to the battery voltage VBAT.
@@ -695,7 +834,11 @@
 /*  The battery voltage measurement path (channel 18) is available on ADC1 and ADC3 */
 #define ADC_BATTERY_VOLTAGE_INSTANCE(__HANDLE__)  ((((__HANDLE__)->Instance) == ADC1)\
                                                    || (((__HANDLE__)->Instance) == ADC3))
-#endif /* (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */
+#endif /* defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) ||
+          defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) ||
+          defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) ||
+          defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) ||
+          defined (STM32L4S7xx) || defined (STM32L4S9xx) */
 
 /**
   * @brief Verify the ADC instance connected to the internal voltage reference VREFINT.
@@ -708,7 +851,8 @@
 /**
   * @brief Verify the length of scheduled injected conversions group.
   * @param __LENGTH__ number of programmed conversions.
-  * @retval SET (__LENGTH__ is within the maximum number of possible programmable injected conversions) or RESET (__LENGTH__ is null or too large)
+  * @retval SET (__LENGTH__ is within the maximum number of possible programmable injected conversions)
+  *         or RESET (__LENGTH__ is null or too large)
   */
 #define IS_ADC_INJECTED_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1U)) && ((__LENGTH__) <= (4U)))
 
@@ -892,7 +1036,10 @@
                                                     ((__CHANNEL__) == ADC_CHANNEL_VBAT)        || \
                                                     ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1_ADC3) || \
                                                     ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2_ADC3)  )))
-#endif /* (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */
+#endif /* defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) ||
+          defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) ||
+          defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) ||
+          defined (STM32L4S7xx) || defined (STM32L4S9xx) */
 
 /**
   * @brief Verify the ADC channel setting in differential mode.
@@ -949,7 +1096,11 @@
                                                          ((__CHANNEL__) == ADC_CHANNEL_10)  || \
                                                          ((__CHANNEL__) == ADC_CHANNEL_11)  || \
                                                          ((__CHANNEL__) == ADC_CHANNEL_12)   )))
-#endif /* (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */
+#endif /* defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) ||
+          defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) ||
+          defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) ||
+          defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) ||
+          defined (STM32L4S7xx) || defined (STM32L4S9xx) */
 
 /**
   * @brief Verify the ADC single-ended input or differential mode setting.
@@ -1071,13 +1222,13 @@
   * @param __WATCHDOG_MODE__ programmed ADC analog watchdog mode setting.
   * @retval SET (__WATCHDOG_MODE__ is valid) or RESET (__WATCHDOG_MODE__ is invalid)
   */
-#define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE)             || \
-                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG)       || \
-                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC)     || \
-                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)  || \
-                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG)          || \
-                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_INJEC)        || \
-                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC)       )
+#define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE)            || \
+                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG)      || \
+                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC)    || \
+                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG)         || \
+                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_INJEC)       || \
+                                                        ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC)      )
 
 /**
   * @brief Verify the ADC conversion (regular or injected or both).
@@ -1191,7 +1342,7 @@
 
 /* ADC calibration */
 HAL_StatusTypeDef       HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff);
-uint32_t                HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff);
+uint32_t                HAL_ADCEx_Calibration_GetValue(const ADC_HandleTypeDef *hadc, uint32_t SingleDiff);
 HAL_StatusTypeDef       HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff,
                                                        uint32_t CalibrationFactor);
 
@@ -1208,11 +1359,11 @@
 /* ADC multimode */
 HAL_StatusTypeDef       HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
 HAL_StatusTypeDef       HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc);
-uint32_t                HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc);
+uint32_t                HAL_ADCEx_MultiModeGetValue(const ADC_HandleTypeDef *hadc);
 #endif /* ADC_MULTIMODE_SUPPORT */
 
 /* ADC retrieve conversion value intended to be used with polling or interruption */
-uint32_t                HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank);
+uint32_t                HAL_ADCEx_InjectedGetValue(const ADC_HandleTypeDef *hadc, uint32_t InjectedRank);
 
 /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
 void                    HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc);
@@ -1222,11 +1373,11 @@
 void                    HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc);
 
 /* ADC group regular conversions stop */
-HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc);
-HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc);
-HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc);
+HAL_StatusTypeDef       HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc);
+HAL_StatusTypeDef       HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc);
+HAL_StatusTypeDef       HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc);
 #if defined(ADC_MULTIMODE_SUPPORT)
-HAL_StatusTypeDef HAL_ADCEx_RegularMultiModeStop_DMA(ADC_HandleTypeDef *hadc);
+HAL_StatusTypeDef       HAL_ADCEx_RegularMultiModeStop_DMA(ADC_HandleTypeDef *hadc);
 #endif /* ADC_MULTIMODE_SUPPORT */
 
 /**
@@ -1238,10 +1389,12 @@
   */
 /* Peripheral Control functions ***********************************************/
 HAL_StatusTypeDef       HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc,
-                                                        ADC_InjectionConfTypeDef *sConfigInjected);
+                                                        const ADC_InjectionConfTypeDef *pConfigInjected);
 #if defined(ADC_MULTIMODE_SUPPORT)
-HAL_StatusTypeDef       HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc,
+                                                         const ADC_MultiModeTypeDef *pMultimode);
 #endif /* ADC_MULTIMODE_SUPPORT */
+
 HAL_StatusTypeDef       HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc);
 HAL_StatusTypeDef       HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc);
 HAL_StatusTypeDef       HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc);
diff --git a/Inc/stm32l4xx_hal_can.h b/Inc/stm32l4xx_hal_can.h
index 4121318..9971d9c 100644
--- a/Inc/stm32l4xx_hal_can.h
+++ b/Inc/stm32l4xx_hal_can.h
@@ -209,7 +209,11 @@
 /**
   * @brief  CAN handle Structure definition
   */
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
 typedef struct __CAN_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
 {
   CAN_TypeDef                 *Instance;                 /*!< Register base address */
 
diff --git a/Inc/stm32l4xx_hal_comp.h b/Inc/stm32l4xx_hal_comp.h
index 9068e06..88d5623 100644
--- a/Inc/stm32l4xx_hal_comp.h
+++ b/Inc/stm32l4xx_hal_comp.h
@@ -51,7 +51,8 @@
 #if defined(COMP2)
   uint32_t WindowMode;         /*!< Set window mode of a pair of comparators instances
                                     (2 consecutive instances odd and even COMP<x> and COMP<x+1>).
-                                    Note: HAL COMP driver allows to set window mode from any COMP instance of the pair of COMP instances composing window mode.
+                                    Note: HAL COMP driver allows to set window mode from any COMP
+                                    instance of the pair of COMP instances composing window mode.
                                     This parameter can be a value of @ref COMP_WindowMode */
 #endif /* COMP2 */
 
@@ -153,17 +154,27 @@
   * @}
   */
 
+
 #if defined(COMP2)
 /** @defgroup COMP_WindowMode COMP Window Mode
   * @{
   */
-#define COMP_WINDOWMODE_DISABLE                 (0x00000000UL)         /*!< Window mode disable: Comparators instances pair COMP1 and COMP2 are independent */
-#define COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE)     /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */
+#define COMP_WINDOWMODE_DISABLE                 (0x00000000UL)            /*!< Window mode disable: Comparators
+                                                                               instances pair COMP1 and COMP2 are
+                                                                               independent */
+#define COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE)        /*!< Window mode enable: Comparators instances
+                                                                               pair COMP1 and COMP2 have their input
+                                                                               plus connected together.
+                                                                               The common input is COMP1 input plus
+                                                                               (COMP2 input plus is no more accessible).
+                                                                               */
 /**
   * @}
   */
 #endif /* COMP2 */
 
+
+
 /** @defgroup COMP_PowerMode COMP power mode
   * @{
   */
@@ -200,7 +211,7 @@
 #if defined(DAC_CHANNEL2_SUPPORT)
 #define COMP_INPUT_MINUS_DAC1_CH2      (COMP_CSR_INMSEL_2                     | COMP_CSR_INMSEL_0)                                           /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */
 #endif /* DAC_CHANNEL2_SUPPORT */
-#define COMP_INPUT_MINUS_IO1           (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1                    )                                           /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */ 
+#define COMP_INPUT_MINUS_IO1           (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1                    )                                           /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */
 #define COMP_INPUT_MINUS_IO2           (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0)                                           /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PB7 for COMP2) */
 #if defined(COMP_CSR_INMESEL_1)
 #define COMP_INPUT_MINUS_IO3           (                     COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */
@@ -315,14 +326,14 @@
   * @param  __HANDLE__  COMP handle
   * @retval None
   */
-#define __HAL_COMP_ENABLE(__HANDLE__)              SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN)
+#define __HAL_COMP_ENABLE(__HANDLE__)       SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN)
 
 /**
   * @brief  Disable the specified comparator.
   * @param  __HANDLE__  COMP handle
   * @retval None
   */
-#define __HAL_COMP_DISABLE(__HANDLE__)             CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN)
+#define __HAL_COMP_DISABLE(__HANDLE__)      CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN)
 
 /**
   * @brief  Lock the specified comparator configuration.
@@ -333,14 +344,14 @@
   * @param  __HANDLE__  COMP handle
   * @retval None
   */
-#define __HAL_COMP_LOCK(__HANDLE__)                SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK)
+#define __HAL_COMP_LOCK(__HANDLE__)         SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK)
 
 /**
   * @brief  Check whether the specified comparator is locked.
   * @param  __HANDLE__  COMP handle
   * @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked
   */
-#define __HAL_COMP_IS_LOCKED(__HANDLE__)           (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) == COMP_CSR_LOCK)
+#define __HAL_COMP_IS_LOCKED(__HANDLE__)    (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) == COMP_CSR_LOCK)
 
 /**
   * @}
@@ -349,7 +360,6 @@
 /** @defgroup COMP_Exti_Management  COMP external interrupt line management
   * @{
   */
-
 /**
   * @brief  Enable the COMP1 EXTI line rising edge trigger.
   * @retval None
@@ -378,19 +388,19 @@
   * @brief  Enable the COMP1 EXTI line rising & falling edge trigger.
   * @retval None
   */
-#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE()   do { \
-                                                               LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP1); \
-                                                               LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP1); \
-                                                             } while(0)
+#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
+                                                                LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP1); \
+                                                                LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP1);\
+                                                              } while(0)
 
 /**
   * @brief  Disable the COMP1 EXTI line rising & falling edge trigger.
   * @retval None
   */
-#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE()  do { \
-                                                               LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP1); \
-                                                               LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP1); \
-                                                             } while(0)
+#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
+                                                                 LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP1); \
+                                                                 LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP1);\
+                                                               } while(0)
 
 /**
   * @brief  Enable the COMP1 EXTI line in interrupt mode.
@@ -463,19 +473,19 @@
   * @brief  Enable the COMP2 EXTI line rising & falling edge trigger.
   * @retval None
   */
-#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE()   do { \
-                                                               LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP2); \
-                                                               LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP2); \
-                                                             } while(0)
+#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
+                                                                LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP2);  \
+                                                                LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP2); \
+                                                              } while(0)
 
 /**
   * @brief  Disable the COMP2 EXTI line rising & falling edge trigger.
   * @retval None
-  */                                         
-#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE()  do { \
-                                                               LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP2); \
-                                                               LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP2); \
-                                                             } while(0)
+  */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
+                                                                 LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP2); \
+                                                                 LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP2);\
+                                                               } while(0)
 
 /**
   * @brief  Enable the COMP2 EXTI line in interrupt mode.
@@ -610,44 +620,44 @@
 /*       However, comparator instance kept as macro parameter for             */
 /*       compatibility with other STM32 families.                             */
 #if defined(COMP_CSR_INMESEL_1) && defined(DAC_CHANNEL2_SUPPORT)
-#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2)    || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)         || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3)         || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO4)         || \
+#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2)    ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)         ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3)         ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO4)         ||\
                                                                  ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO5))
 #elif defined(COMP_CSR_INMESEL_1)
-#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)         || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3)         || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO4)         || \
+#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)         ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3)         ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO4)         ||\
                                                                  ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO5))
 #elif defined(DAC_CHANNEL2_SUPPORT)
-#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2)    || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         || \
+#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2)    ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         ||\
                                                                  ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2))
 #else
-#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    || \
-                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         || \
+#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    ||\
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         ||\
                                                                  ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2))
 #endif /* COMP_CSR_INMESEL_1 && DAC_CHANNEL2_SUPPORT */
 
@@ -662,57 +672,57 @@
 #if defined(COMP2)
 #define IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__)                    \
   (   ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)               \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM8_OC5_COMP2)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)    \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM8_OC5_COMP2)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2)    \
   )
 #else
 #if defined(TIM3)
 #define IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__)                    \
   (   ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)               \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)     \
   )
 #else
 #define IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__)                    \
   (   ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)               \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)     \
-   || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)     \
+      || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)     \
   )
 #endif /* TIM3 */
 #endif /* COMP2 */
 
 #if defined(COMP2)
 #define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__)  \
-   ((((__INSTANCE__) == COMP1) &&                                               \
+  ((((__INSTANCE__) == COMP1) &&                                               \
     (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)            ||      \
      ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)  ||      \
      ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)  ||      \
      ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)))        \
-    ||                                                                          \
-    (((__INSTANCE__) == COMP2) &&                                               \
-     (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)           ||      \
-      ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2) ||      \
-      ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM8_OC5_COMP2) ||      \
-      ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2))))
+   ||                                                                          \
+   (((__INSTANCE__) == COMP2) &&                                               \
+    (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)           ||      \
+     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4_COMP2) ||      \
+     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM8_OC5_COMP2) ||      \
+     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1_COMP2))))
 #else
 #if defined(TIM3)
-     #define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__)  \
-    (((__INSTANCE__) == COMP1) &&                                               \
-    (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)            ||      \
-     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)  ||      \
-     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)  ||      \
-     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)))
+#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__)  \
+  (((__INSTANCE__) == COMP1) &&                                               \
+   (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)            ||      \
+    ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)  ||      \
+    ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)  ||      \
+    ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3_COMP1)))
 #else
-     #define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__)  \
-    (((__INSTANCE__) == COMP1) &&                                               \
-    (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)            ||      \
-     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)  ||      \
-     ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)  ))
+#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__)  \
+  (((__INSTANCE__) == COMP1) &&                                               \
+   (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE)            ||      \
+    ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5_COMP1)  ||      \
+    ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3_COMP1)  ))
 #endif /* TIM3 */
 #endif /* COMP2 */
 
@@ -777,7 +787,7 @@
   * @{
   */
 HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
-uint32_t          HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+uint32_t          HAL_COMP_GetOutputLevel(const COMP_HandleTypeDef *hcomp);
 /* Callback in interrupt mode */
 void              HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
 /**
@@ -788,8 +798,8 @@
 /** @addtogroup COMP_Exported_Functions_Group4
   * @{
   */
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
-uint32_t              HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
+HAL_COMP_StateTypeDef HAL_COMP_GetState(const COMP_HandleTypeDef *hcomp);
+uint32_t              HAL_COMP_GetError(const COMP_HandleTypeDef *hcomp);
 /**
   * @}
   */
diff --git a/Inc/stm32l4xx_hal_crc.h b/Inc/stm32l4xx_hal_crc.h
index f4d9db4..d27b2de 100644
--- a/Inc/stm32l4xx_hal_crc.h
+++ b/Inc/stm32l4xx_hal_crc.h
@@ -318,7 +318,7 @@
 /** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
   * @{
   */
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc);
 /**
   * @}
   */
diff --git a/Inc/stm32l4xx_hal_cryp.h b/Inc/stm32l4xx_hal_cryp.h
index c5d642a..e8a0f1f 100644
--- a/Inc/stm32l4xx_hal_cryp.h
+++ b/Inc/stm32l4xx_hal_cryp.h
@@ -149,7 +149,11 @@
 /**
   * @brief  CRYP handle Structure definition
   */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
 typedef struct __CRYP_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
 {
       AES_TypeDef              *Instance;        /*!< Register base address        */
 
diff --git a/Inc/stm32l4xx_hal_dcmi.h b/Inc/stm32l4xx_hal_dcmi.h
index fe78b6e..0942c55 100644
--- a/Inc/stm32l4xx_hal_dcmi.h
+++ b/Inc/stm32l4xx_hal_dcmi.h
@@ -126,7 +126,11 @@
 /**
   * @brief  DCMI handle Structure definition
   */
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
 typedef struct __DCMI_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
 {
   DCMI_TypeDef                  *Instance;           /*!< DCMI Register base address   */
 
diff --git a/Inc/stm32l4xx_hal_dma.h b/Inc/stm32l4xx_hal_dma.h
index f354c4f..586567d 100644
--- a/Inc/stm32l4xx_hal_dma.h
+++ b/Inc/stm32l4xx_hal_dma.h
@@ -21,7 +21,7 @@
 #define STM32L4xx_HAL_DMA_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -82,7 +82,7 @@
   HAL_DMA_STATE_READY             = 0x01U,  /*!< DMA initialized and ready for use      */
   HAL_DMA_STATE_BUSY              = 0x02U,  /*!< DMA process is ongoing                 */
   HAL_DMA_STATE_TIMEOUT           = 0x03U,  /*!< DMA timeout state                      */
-}HAL_DMA_StateTypeDef;
+} HAL_DMA_StateTypeDef;
 
 /**
   * @brief  HAL DMA Error Code structure definition
@@ -91,7 +91,7 @@
 {
   HAL_DMA_FULL_TRANSFER      = 0x00U,    /*!< Full transfer     */
   HAL_DMA_HALF_TRANSFER      = 0x01U     /*!< Half Transfer     */
-}HAL_DMA_LevelCompleteTypeDef;
+} HAL_DMA_LevelCompleteTypeDef;
 
 
 /**
@@ -104,7 +104,7 @@
   HAL_DMA_XFER_ERROR_CB_ID         = 0x02U,    /*!< Error             */
   HAL_DMA_XFER_ABORT_CB_ID         = 0x03U,    /*!< Abort             */
   HAL_DMA_XFER_ALL_CB_ID           = 0x04U     /*!< All               */
-}HAL_DMA_CallbackIDTypeDef;
+} HAL_DMA_CallbackIDTypeDef;
 
 /**
   * @brief  DMA handle Structure definition
@@ -121,13 +121,13 @@
 
   void                  *Parent;                                                        /*!< Parent object state                  */
 
-  void                  (* XferCpltCallback)(struct __DMA_HandleTypeDef * hdma);        /*!< DMA transfer complete callback       */
+  void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma);                          /*!< DMA transfer complete callback       */
 
-  void                  (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef * hdma);    /*!< DMA Half transfer complete callback  */
+  void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma);                      /*!< DMA Half transfer complete callback  */
 
-  void                  (* XferErrorCallback)(struct __DMA_HandleTypeDef * hdma);       /*!< DMA transfer error callback          */
+  void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma);                         /*!< DMA transfer error callback          */
 
-  void                  (* XferAbortCallback)(struct __DMA_HandleTypeDef * hdma);       /*!< DMA transfer abort callback          */
+  void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma);                         /*!< DMA transfer abort callback          */
 
   __IO uint32_t         ErrorCode;                                                      /*!< DMA Error code                       */
 
@@ -150,7 +150,7 @@
 
 #endif /* DMAMUX1 */
 
-}DMA_HandleTypeDef;
+} DMA_HandleTypeDef;
 /**
   * @}
   */
@@ -753,7 +753,7 @@
   */
 /* Initialization and de-initialization functions *****************************/
 HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
-HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
 /**
   * @}
   */
@@ -762,13 +762,13 @@
   * @{
   */
 /* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
 HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
 HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
 HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
 HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
 void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
-HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
 HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
 
 /**
diff --git a/Inc/stm32l4xx_hal_dma_ex.h b/Inc/stm32l4xx_hal_dma_ex.h
index 77b89df..1b0d2d9 100644
--- a/Inc/stm32l4xx_hal_dma_ex.h
+++ b/Inc/stm32l4xx_hal_dma_ex.h
@@ -69,7 +69,7 @@
                                This parameter must be a number between Min_Data = 1 and Max_Data = 32 */
 
 
-}HAL_DMA_MuxSyncConfigTypeDef;
+} HAL_DMA_MuxSyncConfigTypeDef;
 
 
 /**
@@ -77,7 +77,7 @@
   */
 typedef struct
 {
- uint32_t SignalID;      /*!< Specifies the ID of the signal used for DMAMUX request generator
+  uint32_t SignalID;      /*!< Specifies the ID of the signal used for DMAMUX request generator
                               This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */
 
   uint32_t Polarity;       /*!< Specifies the polarity of the signal on which the request is generated.
@@ -86,7 +86,7 @@
   uint32_t RequestNumber;  /*!< Specifies the number of DMA request that will be generated after a signal event
                                 This parameter must be a number between Min_Data = 1 and Max_Data = 32 */
 
-}HAL_DMA_MuxRequestGeneratorConfigTypeDef;
+} HAL_DMA_MuxRequestGeneratorConfigTypeDef;
 
 /**
   * @}
@@ -211,10 +211,10 @@
   */
 
 /* ------------------------- REQUEST -----------------------------------------*/
-HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma,
-             HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig);
-HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma);
-HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma,
+                                                      HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig);
+HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma);
 /* -------------------------------------------------------------------------- */
 
 /* ------------------------- SYNCHRO -----------------------------------------*/
diff --git a/Inc/stm32l4xx_hal_dsi.h b/Inc/stm32l4xx_hal_dsi.h
index a044589..c6106ac 100644
--- a/Inc/stm32l4xx_hal_dsi.h
+++ b/Inc/stm32l4xx_hal_dsi.h
@@ -976,7 +976,7 @@
 #define __HAL_DSI_WRAPPER_ENABLE(__HANDLE__) do { \
                                                   __IO uint32_t tmpreg = 0x00U; \
                                                   SET_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\
-                                                  /* Delay after an DSI warpper enabling */ \
+                                                  /* Delay after an DSI wrapper enabling */ \
                                                   tmpreg = READ_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\
                                                   UNUSED(tmpreg); \
                                                 } while(0U)
@@ -989,7 +989,7 @@
 #define __HAL_DSI_WRAPPER_DISABLE(__HANDLE__) do { \
                                                    __IO uint32_t tmpreg = 0x00U; \
                                                    CLEAR_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\
-                                                   /* Delay after an DSI warpper disabling*/ \
+                                                   /* Delay after an DSI wrapper disabling*/ \
                                                    tmpreg = READ_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\
                                                    UNUSED(tmpreg); \
                                                  } while(0U)
@@ -1271,10 +1271,10 @@
                                                      || ((LooselyPacked) == DSI_LOOSELY_PACKED_DISABLE))
 #define IS_DSI_DE_POLARITY(DataEnable)              (((DataEnable) == DSI_DATA_ENABLE_ACTIVE_HIGH)\
                                                      || ((DataEnable) == DSI_DATA_ENABLE_ACTIVE_LOW))
-#define IS_DSI_VSYNC_POLARITY(VSYNC)                (((VSYNC) == DSI_VSYNC_ACTIVE_HIGH)\
-                                                     || ((VSYNC) == DSI_VSYNC_ACTIVE_LOW))
-#define IS_DSI_HSYNC_POLARITY(HSYNC)                (((HSYNC) == DSI_HSYNC_ACTIVE_HIGH)\
-                                                     || ((HSYNC) == DSI_HSYNC_ACTIVE_LOW))
+#define IS_DSI_VSYNC_POLARITY(Vsync)                (((Vsync) == DSI_VSYNC_ACTIVE_HIGH)\
+                                                     || ((Vsync) == DSI_VSYNC_ACTIVE_LOW))
+#define IS_DSI_HSYNC_POLARITY(Hsync)                (((Hsync) == DSI_HSYNC_ACTIVE_HIGH)\
+                                                     || ((Hsync) == DSI_HSYNC_ACTIVE_LOW))
 #define IS_DSI_VIDEO_MODE_TYPE(VideoModeType)       (((VideoModeType) == DSI_VID_MODE_NB_PULSES) || \
                                                      ((VideoModeType) == DSI_VID_MODE_NB_EVENTS) || \
                                                      ((VideoModeType) == DSI_VID_MODE_BURST))
diff --git a/Inc/stm32l4xx_hal_hcd.h b/Inc/stm32l4xx_hal_hcd.h
index e9714fe..5614162 100644
--- a/Inc/stm32l4xx_hal_hcd.h
+++ b/Inc/stm32l4xx_hal_hcd.h
@@ -158,6 +158,10 @@
 
 #define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance)\
                                                              & (__INTERRUPT__)) == (__INTERRUPT__))
+
+#define __HAL_HCD_GET_CH_FLAG(__HANDLE__, __chnum__, __INTERRUPT__) \
+  ((USB_ReadChInterrupts((__HANDLE__)->Instance, (__chnum__)) & (__INTERRUPT__)) == (__INTERRUPT__))
+
 #define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
 #define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
 
@@ -247,6 +251,11 @@
                                            uint8_t token, uint8_t *pbuff,
                                            uint16_t length, uint8_t do_ping);
 
+HAL_StatusTypeDef HAL_HCD_HC_SetHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
+                                        uint8_t addr, uint8_t PortNbr);
+
+HAL_StatusTypeDef HAL_HCD_HC_ClearHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+
 /* Non-Blocking mode: Interrupt */
 void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
 void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
@@ -275,16 +284,13 @@
 /** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
   * @{
   */
-HCD_StateTypeDef        HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
-HCD_URBStateTypeDef     HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
-HCD_HCStateTypeDef      HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
-uint32_t                HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_StateTypeDef        HAL_HCD_GetState(HCD_HandleTypeDef const *hhcd);
+HCD_URBStateTypeDef     HAL_HCD_HC_GetURBState(HCD_HandleTypeDef const *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef      HAL_HCD_HC_GetState(HCD_HandleTypeDef const *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef const *hhcd, uint8_t chnum);
 uint32_t                HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
 uint32_t                HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
 
-/**
-  * @}
-  */
 
 /**
   * @}
@@ -305,6 +311,9 @@
 /**
   * @}
   */
+/**
+  * @}
+  */
 #endif /* defined (USB_OTG_FS) */
 
 #ifdef __cplusplus
diff --git a/Inc/stm32l4xx_hal_i2c.h b/Inc/stm32l4xx_hal_i2c.h
index 0ea4ce3..51adedc 100644
--- a/Inc/stm32l4xx_hal_i2c.h
+++ b/Inc/stm32l4xx_hal_i2c.h
@@ -207,6 +207,7 @@
 
   DMA_HandleTypeDef          *hdmarx;        /*!< I2C Rx DMA handle parameters              */
 
+
   HAL_LockTypeDef            Lock;           /*!< I2C locking object                        */
 
   __IO HAL_I2C_StateTypeDef  State;          /*!< I2C communication state                   */
@@ -804,8 +805,8 @@
                                                                  (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
                                                                 (~I2C_CR2_RD_WRN)) : \
                                                      (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
-                                                                 (I2C_CR2_ADD10) | (I2C_CR2_START)) & \
-                                                                (~I2C_CR2_RD_WRN)))
+                                                                 (I2C_CR2_ADD10) | (I2C_CR2_START) | \
+                                                                 (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)))
 
 #define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \
                                                     ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
diff --git a/Inc/stm32l4xx_hal_irda_ex.h b/Inc/stm32l4xx_hal_irda_ex.h
index 327a189..fac1898 100644
--- a/Inc/stm32l4xx_hal_irda_ex.h
+++ b/Inc/stm32l4xx_hal_irda_ex.h
@@ -69,10 +69,12 @@
   * @param  __CLOCKSOURCE__ output variable.
   * @retval IRDA clocking source, written in __CLOCKSOURCE__.
   */
-#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) \
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) \
+ || defined (STM32L485xx) || defined (STM32L486xx) \
  || defined (STM32L496xx) || defined (STM32L4A6xx) \
  || defined (STM32L4P5xx) || defined (STM32L4Q5xx) \
- || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
+ || defined (STM32L4R5xx) || defined (STM32L4R7xx) \
+ || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
 #define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
   do {                                                        \
     if((__HANDLE__)->Instance == USART1)                      \
@@ -185,7 +187,8 @@
       (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;         \
     }                                                         \
   } while(0)
-#elif defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx)
+#elif defined(STM32L412xx) || defined(STM32L422xx) \
+   || defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx)
 #define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
   do {                                                        \
     if((__HANDLE__)->Instance == USART1)                      \
diff --git a/Inc/stm32l4xx_hal_lptim.h b/Inc/stm32l4xx_hal_lptim.h
index 3e66959..a1f3540 100644
--- a/Inc/stm32l4xx_hal_lptim.h
+++ b/Inc/stm32l4xx_hal_lptim.h
@@ -771,7 +771,7 @@
   * @{
   */
 /* Peripheral State functions  ************************************************/
-HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(const LPTIM_HandleTypeDef *hlptim);
 /**
   * @}
   */
diff --git a/Inc/stm32l4xx_hal_ltdc.h b/Inc/stm32l4xx_hal_ltdc.h
index 1ea4a63..f02fc2f 100644
--- a/Inc/stm32l4xx_hal_ltdc.h
+++ b/Inc/stm32l4xx_hal_ltdc.h
@@ -346,14 +346,14 @@
 /** @defgroup LTDC_Pixelformat LTDC Pixel format
   * @{
   */
-#define LTDC_PIXEL_FORMAT_ARGB8888        0x00000000U   /*!< ARGB8888 LTDC pixel format */
-#define LTDC_PIXEL_FORMAT_RGB888          0x00000001U   /*!< RGB888 LTDC pixel format   */
-#define LTDC_PIXEL_FORMAT_RGB565          0x00000002U   /*!< RGB565 LTDC pixel format   */
-#define LTDC_PIXEL_FORMAT_ARGB1555        0x00000003U   /*!< ARGB1555 LTDC pixel format */
-#define LTDC_PIXEL_FORMAT_ARGB4444        0x00000004U   /*!< ARGB4444 LTDC pixel format */
-#define LTDC_PIXEL_FORMAT_L8              0x00000005U   /*!< L8 LTDC pixel format       */
-#define LTDC_PIXEL_FORMAT_AL44            0x00000006U   /*!< AL44 LTDC pixel format     */
-#define LTDC_PIXEL_FORMAT_AL88            0x00000007U   /*!< AL88 LTDC pixel format     */
+#define LTDC_PIXEL_FORMAT_ARGB8888        0x00000000U   /*!< ARGB8888 LTDC pixel format             */
+#define LTDC_PIXEL_FORMAT_RGB888          0x00000001U   /*!< RGB888 LTDC pixel format               */
+#define LTDC_PIXEL_FORMAT_RGB565          0x00000002U   /*!< RGB565 LTDC pixel format               */
+#define LTDC_PIXEL_FORMAT_ARGB1555        0x00000003U   /*!< ARGB1555 LTDC pixel format             */
+#define LTDC_PIXEL_FORMAT_ARGB4444        0x00000004U   /*!< ARGB4444 LTDC pixel format             */
+#define LTDC_PIXEL_FORMAT_L8              0x00000005U   /*!< L8 LTDC pixel format                   */
+#define LTDC_PIXEL_FORMAT_AL44            0x00000006U   /*!< AL44 LTDC pixel format                 */
+#define LTDC_PIXEL_FORMAT_AL88            0x00000007U   /*!< AL88 LTDC pixel format                 */
 /**
   * @}
   */
diff --git a/Inc/stm32l4xx_hal_nand.h b/Inc/stm32l4xx_hal_nand.h
index 52a911c..3b149f4 100644
--- a/Inc/stm32l4xx_hal_nand.h
+++ b/Inc/stm32l4xx_hal_nand.h
@@ -105,9 +105,8 @@
   FunctionalState ExtraCommandEnable;    /*!< NAND extra command needed for Page reading mode. This
                                               parameter is mandatory for some NAND parts after the read
                                               command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence.
-                                              Example: Toshiba THTH58BYG3S0HBAI6.
                                               This parameter could be ENABLE or DISABLE
-                                              Please check the Read Mode sequnece in the NAND device datasheet */
+                                              Please check the Read Mode sequence in the NAND device datasheet */
 } NAND_DeviceConfigTypeDef;
 
 /**
@@ -127,7 +126,7 @@
 
   __IO HAL_NAND_StateTypeDef     State;      /*!< NAND device access state                              */
 
-  NAND_DeviceConfigTypeDef       Config;     /*!< NAND phusical characteristic information structure    */
+  NAND_DeviceConfigTypeDef       Config;     /*!< NAND physical characteristic information structure    */
 
 #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
   void (* MspInitCallback)(struct __NAND_HandleTypeDef *hnand);               /*!< NAND Msp Init callback              */
@@ -215,27 +214,27 @@
 /* IO operation functions  ****************************************************/
 HAL_StatusTypeDef  HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
 
-HAL_StatusTypeDef  HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
-                                         uint32_t NumPageToRead);
-HAL_StatusTypeDef  HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
-                                          uint32_t NumPageToWrite);
-HAL_StatusTypeDef  HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
+HAL_StatusTypeDef  HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                         uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                          const uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef  HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
                                               uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
-HAL_StatusTypeDef  HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
-                                               uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef  HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                               const uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
 
-HAL_StatusTypeDef  HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
-                                          uint32_t NumPageToRead);
-HAL_StatusTypeDef  HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
-                                           uint32_t NumPageToWrite);
-HAL_StatusTypeDef  HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
+HAL_StatusTypeDef  HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                          uint16_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                           const uint16_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef  HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
                                                uint16_t *pBuffer, uint32_t NumSpareAreaToRead);
-HAL_StatusTypeDef  HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
-                                                uint16_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef  HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                                const uint16_t *pBuffer, uint32_t NumSpareAreaTowrite);
 
-HAL_StatusTypeDef  HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+HAL_StatusTypeDef  HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress);
 
-uint32_t           HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+uint32_t           HAL_NAND_Address_Inc(const NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
 
 #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
 /* NAND callback registering/unregistering */
@@ -265,8 +264,8 @@
   * @{
   */
 /* NAND State functions *******************************************************/
-HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
-uint32_t              HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+HAL_NAND_StateTypeDef HAL_NAND_GetState(const NAND_HandleTypeDef *hnand);
+uint32_t              HAL_NAND_Read_Status(const NAND_HandleTypeDef *hnand);
 /**
   * @}
   */
diff --git a/Inc/stm32l4xx_hal_nor.h b/Inc/stm32l4xx_hal_nor.h
index 42806cb..6116975 100644
--- a/Inc/stm32l4xx_hal_nor.h
+++ b/Inc/stm32l4xx_hal_nor.h
@@ -234,7 +234,7 @@
   */
 
 /* NOR State functions ********************************************************/
-HAL_NOR_StateTypeDef  HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StateTypeDef  HAL_NOR_GetState(const NOR_HandleTypeDef *hnor);
 HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
 /**
   * @}
diff --git a/Inc/stm32l4xx_hal_ospi.h b/Inc/stm32l4xx_hal_ospi.h
index 0f504db..273781a 100644
--- a/Inc/stm32l4xx_hal_ospi.h
+++ b/Inc/stm32l4xx_hal_ospi.h
@@ -21,7 +21,7 @@
 #define STM32L4xx_HAL_OSPI_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -92,7 +92,7 @@
                                            Refresh+1 clock cycles.
                                            This parameter can be a value between 0 and 0xFFFFFFFF */
 #endif
-}OSPI_InitTypeDef;
+} OSPI_InitTypeDef;
 
 /**
   * @brief  HAL OSPI Handle Structure definition
@@ -113,21 +113,21 @@
   __IO uint32_t              ErrorCode;     /*!< Error code in case of HAL driver internal error  */
   uint32_t                   Timeout;       /*!< Timeout used for the OSPI external device access */
 #if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
-  void (* ErrorCallback)        (struct __OSPI_HandleTypeDef *hospi);
-  void (* AbortCpltCallback)    (struct __OSPI_HandleTypeDef *hospi);
+  void (* ErrorCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* AbortCpltCallback)(struct __OSPI_HandleTypeDef *hospi);
   void (* FifoThresholdCallback)(struct __OSPI_HandleTypeDef *hospi);
-  void (* CmdCpltCallback)      (struct __OSPI_HandleTypeDef *hospi);
-  void (* RxCpltCallback)       (struct __OSPI_HandleTypeDef *hospi);
-  void (* TxCpltCallback)       (struct __OSPI_HandleTypeDef *hospi);
-  void (* RxHalfCpltCallback)   (struct __OSPI_HandleTypeDef *hospi);
-  void (* TxHalfCpltCallback)   (struct __OSPI_HandleTypeDef *hospi);
-  void (* StatusMatchCallback)  (struct __OSPI_HandleTypeDef *hospi);
-  void (* TimeOutCallback)      (struct __OSPI_HandleTypeDef *hospi);
+  void (* CmdCpltCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* RxCpltCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* TxCpltCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* RxHalfCpltCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* TxHalfCpltCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* StatusMatchCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* TimeOutCallback)(struct __OSPI_HandleTypeDef *hospi);
 
-  void (* MspInitCallback)      (struct __OSPI_HandleTypeDef *hospi);
-  void (* MspDeInitCallback)    (struct __OSPI_HandleTypeDef *hospi);
+  void (* MspInitCallback)(struct __OSPI_HandleTypeDef *hospi);
+  void (* MspDeInitCallback)(struct __OSPI_HandleTypeDef *hospi);
 #endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
-}OSPI_HandleTypeDef;
+} OSPI_HandleTypeDef;
 
 /**
   * @brief  HAL OSPI Regular Command Structure definition
@@ -178,7 +178,7 @@
                                            This parameter can be a value of @ref OSPI_DQSMode */
   uint32_t SIOOMode;                  /*!< It enables or not the SIOO mode.
                                            This parameter can be a value of @ref OSPI_SIOOMode */
-}OSPI_RegularCmdTypeDef;
+} OSPI_RegularCmdTypeDef;
 
 /**
   * @brief  HAL OSPI Hyperbus Configuration Structure definition
@@ -193,7 +193,7 @@
                                       This parameter can be a value of @ref OSPI_WriteZeroLatency */
   uint32_t LatencyMode;          /*!< It configures the latency mode.
                                       This parameter can be a value of @ref OSPI_LatencyMode */
-}OSPI_HyperbusCfgTypeDef;
+} OSPI_HyperbusCfgTypeDef;
 
 /**
   * @brief  HAL OSPI Hyperbus Command Structure definition
@@ -212,7 +212,7 @@
                                   In case of autopolling mode, this parameter can be any value between 1 and 4 */
   uint32_t DQSMode;          /*!< It enables or not the data strobe management.
                                   This parameter can be a value of @ref OSPI_DQSMode */
-}OSPI_HyperbusCmdTypeDef;
+} OSPI_HyperbusCmdTypeDef;
 
 /**
   * @brief  HAL OSPI Auto Polling mode configuration structure definition
@@ -229,7 +229,7 @@
                                     This parameter can be a value of @ref OSPI_AutomaticStop */
   uint32_t Interval;           /*!< Specifies the number of clock cycles between two read during automatic polling phases.
                                     This parameter can be any value between 0 and 0xFFFF */
-}OSPI_AutoPollingTypeDef;
+} OSPI_AutoPollingTypeDef;
 
 /**
   * @brief  HAL OSPI Memory Mapped mode configuration structure definition
@@ -240,7 +240,7 @@
                                     This parameter can be a value of @ref OSPI_TimeOutActivation */
   uint32_t TimeOutPeriod;      /*!< Specifies the number of clock to wait when the FIFO is full before to release the chip select.
                                     This parameter can be any value between 0 and 0xFFFF */
-}OSPI_MemoryMappedTypeDef;
+} OSPI_MemoryMappedTypeDef;
 
 /**
   * @brief HAL OSPI IO Manager Configuration structure definition
@@ -262,7 +262,7 @@
                                         if some signals are multiplexed in the OSPI IO Manager with the other OSPI.
                                         This parameter can be a value between 1 and 256 */
 #endif
-}OSPIM_CfgTypeDef;
+} OSPIM_CfgTypeDef;
 
 #if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
 /**
@@ -283,7 +283,7 @@
 
   HAL_OSPI_MSP_INIT_CB_ID       = 0x0AU,  /*!< OSPI MspInit Callback ID          */
   HAL_OSPI_MSP_DEINIT_CB_ID     = 0x0BU   /*!< OSPI MspDeInit Callback ID        */
-}HAL_OSPI_CallbackIDTypeDef;
+} HAL_OSPI_CallbackIDTypeDef;
 
 /**
   * @brief  HAL OSPI Callback pointer definition
@@ -771,10 +771,10 @@
 /** @addtogroup OSPI_Exported_Functions_Group1
   * @{
   */
-HAL_StatusTypeDef     HAL_OSPI_Init                 (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_MspInit              (OSPI_HandleTypeDef *hospi);
-HAL_StatusTypeDef     HAL_OSPI_DeInit               (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_MspDeInit            (OSPI_HandleTypeDef *hospi);
+HAL_StatusTypeDef     HAL_OSPI_Init(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_MspInit(OSPI_HandleTypeDef *hospi);
+HAL_StatusTypeDef     HAL_OSPI_DeInit(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_MspDeInit(OSPI_HandleTypeDef *hospi);
 
 /**
   * @}
@@ -785,7 +785,7 @@
   * @{
   */
 /* OSPI IRQ handler function */
-void                  HAL_OSPI_IRQHandler           (OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_IRQHandler(OSPI_HandleTypeDef *hospi);
 
 /* OSPI command configuration functions */
 HAL_StatusTypeDef     HAL_OSPI_Command(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd, uint32_t Timeout);
@@ -806,25 +806,25 @@
 HAL_StatusTypeDef     HAL_OSPI_AutoPolling_IT(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg);
 
 /* OSPI memory-mapped mode functions */
-HAL_StatusTypeDef     HAL_OSPI_MemoryMapped         (OSPI_HandleTypeDef *hospi, OSPI_MemoryMappedTypeDef *cfg);
+HAL_StatusTypeDef     HAL_OSPI_MemoryMapped(OSPI_HandleTypeDef *hospi, OSPI_MemoryMappedTypeDef *cfg);
 
 /* Callback functions in non-blocking modes ***********************************/
-void                  HAL_OSPI_ErrorCallback        (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_AbortCpltCallback    (OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_ErrorCallback(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_AbortCpltCallback(OSPI_HandleTypeDef *hospi);
 void                  HAL_OSPI_FifoThresholdCallback(OSPI_HandleTypeDef *hospi);
 
 /* OSPI indirect mode functions */
-void                  HAL_OSPI_CmdCpltCallback      (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_RxCpltCallback       (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_TxCpltCallback       (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_RxHalfCpltCallback   (OSPI_HandleTypeDef *hospi);
-void                  HAL_OSPI_TxHalfCpltCallback   (OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_CmdCpltCallback(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_RxCpltCallback(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_TxCpltCallback(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_RxHalfCpltCallback(OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_TxHalfCpltCallback(OSPI_HandleTypeDef *hospi);
 
 /* OSPI status flag polling mode functions */
-void                  HAL_OSPI_StatusMatchCallback  (OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_StatusMatchCallback(OSPI_HandleTypeDef *hospi);
 
 /* OSPI memory-mapped mode functions */
-void                  HAL_OSPI_TimeOutCallback      (OSPI_HandleTypeDef *hospi);
+void                  HAL_OSPI_TimeOutCallback(OSPI_HandleTypeDef *hospi);
 
 #if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
 /* OSPI callback registering/unregistering */
@@ -840,13 +840,13 @@
 /** @addtogroup OSPI_Exported_Functions_Group3
   * @{
   */
-HAL_StatusTypeDef     HAL_OSPI_Abort                (OSPI_HandleTypeDef *hospi);
-HAL_StatusTypeDef     HAL_OSPI_Abort_IT             (OSPI_HandleTypeDef *hospi);
-HAL_StatusTypeDef     HAL_OSPI_SetFifoThreshold     (OSPI_HandleTypeDef *hospi, uint32_t Threshold);
-uint32_t              HAL_OSPI_GetFifoThreshold     (OSPI_HandleTypeDef *hospi);
-HAL_StatusTypeDef     HAL_OSPI_SetTimeout           (OSPI_HandleTypeDef *hospi, uint32_t Timeout);
-uint32_t              HAL_OSPI_GetError             (OSPI_HandleTypeDef *hospi);
-uint32_t              HAL_OSPI_GetState             (OSPI_HandleTypeDef *hospi);
+HAL_StatusTypeDef     HAL_OSPI_Abort(OSPI_HandleTypeDef *hospi);
+HAL_StatusTypeDef     HAL_OSPI_Abort_IT(OSPI_HandleTypeDef *hospi);
+HAL_StatusTypeDef     HAL_OSPI_SetFifoThreshold(OSPI_HandleTypeDef *hospi, uint32_t Threshold);
+uint32_t              HAL_OSPI_GetFifoThreshold(const OSPI_HandleTypeDef *hospi);
+HAL_StatusTypeDef     HAL_OSPI_SetTimeout(OSPI_HandleTypeDef *hospi, uint32_t Timeout);
+uint32_t              HAL_OSPI_GetError(const OSPI_HandleTypeDef *hospi);
+uint32_t              HAL_OSPI_GetState(const OSPI_HandleTypeDef *hospi);
 
 /**
   * @}
diff --git a/Inc/stm32l4xx_hal_pcd.h b/Inc/stm32l4xx_hal_pcd.h
index 9587c08..3cf2549 100644
--- a/Inc/stm32l4xx_hal_pcd.h
+++ b/Inc/stm32l4xx_hal_pcd.h
@@ -111,8 +111,8 @@
   PCD_EPTypeDef           OUT_ep[16];  /*!< OUT endpoint parameters           */
 #endif /* defined (USB_OTG_FS) */
 #if defined (USB)
-  PCD_EPTypeDef           IN_ep[8];   /*!< IN endpoint parameters             */
-  PCD_EPTypeDef           OUT_ep[8];  /*!< OUT endpoint parameters            */
+  PCD_EPTypeDef           IN_ep[8];    /*!< IN endpoint parameters            */
+  PCD_EPTypeDef           OUT_ep[8];   /*!< OUT endpoint parameters           */
 #endif /* defined (USB) */
   HAL_LockTypeDef         Lock;        /*!< PCD peripheral status             */
   __IO PCD_StateTypeDef   State;       /*!< PCD communication state           */
@@ -202,14 +202,14 @@
   *  @brief macros to handle interrupts and specific clock configurations
   * @{
   */
-#if defined (USB_OTG_FS)
 #define __HAL_PCD_ENABLE(__HANDLE__)                       (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
 #define __HAL_PCD_DISABLE(__HANDLE__)                      (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
 
 #define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \
   ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
 
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) &=  (__INTERRUPT__))
+#if defined (USB_OTG_FS)
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
 #define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
 
 #define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \
@@ -226,11 +226,6 @@
 #endif /* defined (USB_OTG_FS) */
 
 #if defined (USB)
-#define __HAL_PCD_ENABLE(__HANDLE__)                              (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__)                             (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)             ((USB_ReadInterrupts((__HANDLE__)->Instance)\
-                                                                    & (__INTERRUPT__)) == (__INTERRUPT__))
-
 #define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)           (((__HANDLE__)->Instance->ISTR)\
                                                                    &= (uint16_t)(~(__INTERRUPT__)))
 
@@ -373,7 +368,7 @@
 HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
 HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
 HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-uint32_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+uint32_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr);
 /**
   * @}
   */
@@ -382,7 +377,7 @@
 /** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
   * @{
   */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd);
 /**
   * @}
   */
@@ -491,8 +486,6 @@
 /* GetENDPOINT */
 #define PCD_GET_ENDPOINT(USBx, bEpNum)             (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)))
 
-/* ENDPOINT transfer */
-#define USB_EP0StartXfer                           USB_EPStartXfer
 
 /**
   * @brief  sets the type in the endpoint register(bits EP_TYPE[1:0])
diff --git a/Inc/stm32l4xx_hal_pssi.h b/Inc/stm32l4xx_hal_pssi.h
index 6051f00..2fcee27 100644
--- a/Inc/stm32l4xx_hal_pssi.h
+++ b/Inc/stm32l4xx_hal_pssi.h
@@ -31,13 +31,11 @@
   * @{
   */
 #if defined(PSSI)
-/** @defgroup PSSI PSSI
+/** @addtogroup PSSI PSSI
   * @brief PSSI HAL module driver
   * @{
   */
 
-#ifdef HAL_PSSI_MODULE_ENABLED
-
 /* Exported types ------------------------------------------------------------*/
 /** @defgroup PSSI_Exported_Types PSSI Exported Types
   * @{
@@ -80,25 +78,25 @@
   */
 typedef struct __PSSI_HandleTypeDef
 {
-  PSSI_TypeDef         *Instance;    /*!< PSSI register base address     */
-  PSSI_InitTypeDef      Init;        /*!< PSSI Initialization Structure  */
-  uint32_t             *pBuffPtr;    /*!< PSSI Data buffer               */
+  PSSI_TypeDef         *Instance;    /*!< PSSI register base address.    */
+  PSSI_InitTypeDef      Init;        /*!< PSSI Initialization Structure. */
+  uint32_t             *pBuffPtr;    /*!< PSSI Data buffer.              */
   uint32_t              XferCount;   /*!< PSSI transfer count            */
   uint32_t              XferSize;    /*!< PSSI  transfer size            */
   DMA_HandleTypeDef    *hdmatx;      /*!< PSSI Tx DMA Handle parameters  */
   DMA_HandleTypeDef    *hdmarx;      /*!< PSSI Rx DMA Handle parameters  */
 
-  void (* TxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi);    /*!< PSSI transfer complete callback  */
-  void (* RxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi);    /*!< PSSI transfer complete callback  */
-  void (* ErrorCallback)(struct __PSSI_HandleTypeDef *hpssi);     /*!< PSSI transfer complete callback  */
-  void (* AbortCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer error callback     */
+  void (* TxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi);    /*!< PSSI transfer complete callback. */
+  void (* RxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi);    /*!< PSSI transfer complete callback. */
+  void (* ErrorCallback)(struct __PSSI_HandleTypeDef *hpssi);     /*!< PSSI transfer complete callback. */
+  void (* AbortCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer error callback.    */
 
-  void (* MspInitCallback)(struct __PSSI_HandleTypeDef *hpssi);   /*!< PSSI Msp Init callback           */
-  void (* MspDeInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp DeInit callback         */
+  void (* MspInitCallback)(struct __PSSI_HandleTypeDef *hpssi);   /*!< PSSI Msp Init callback.          */
+  void (* MspDeInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp DeInit callback.        */
 
-  HAL_LockTypeDef             Lock;                               /*!< PSSI lock                        */
-  __IO HAL_PSSI_StateTypeDef State;                               /*!< PSSI transfer state              */
-  __IO uint32_t               ErrorCode;                          /*!< PSSI error code                  */
+  HAL_LockTypeDef             Lock;                               /*!< PSSI lock.                       */
+  __IO HAL_PSSI_StateTypeDef State;                               /*!< PSSI transfer state.             */
+  __IO uint32_t               ErrorCode;                          /*!< PSSI error code.                 */
 
 } PSSI_HandleTypeDef;
 
@@ -108,7 +106,6 @@
   */
 typedef  void (*pPSSI_CallbackTypeDef)(PSSI_HandleTypeDef *hpssi);  /*!< Pointer to a PSSI common callback function */
 
-
 /**
   * @brief  HAL PSSI Callback ID enumeration definition
   */
@@ -124,6 +121,7 @@
 
 } HAL_PSSI_CallbackIDTypeDef;
 
+
 /**
   * @}
   */
@@ -133,7 +131,7 @@
   * @{
   */
 
-/** @defgroup PSSI_ERROR_CODE PSSI Error Code
+/** @defgroup PSSI_Error_Code PSSI Error Code
   * @{
   */
 #define HAL_PSSI_ERROR_NONE             0x00000000U /*!< No error                */
@@ -178,7 +176,7 @@
   * @}
   */
 
-/** @defgroup PSSI_CONTROL_SIGNAL PSSI Control Signal Configuration
+/** @defgroup ControlSignal_Configuration ControlSignal Configuration
   * @{
   */
 #define HAL_PSSI_DE_RDY_DISABLE           (0x0U << PSSI_CR_DERDYCFG_Pos) /*!< Neither DE nor RDY are enabled */
@@ -195,7 +193,7 @@
   */
 
 
-/** @defgroup PSSI_DATA_ENABLE_POLARITY PSSI Data Enable Polarity
+/** @defgroup Data_Enable_Polarity Data Enable Polarity
   * @{
   */
 #define HAL_PSSI_DEPOL_ACTIVE_LOW         0x0U            /*!< Active Low */
@@ -203,7 +201,7 @@
 /**
   * @}
   */
-/** @defgroup PSSI_READY_POLARITY PSSI Ready Polarity
+/** @defgroup Reday_Polarity Reday Polarity
   * @{
   */
 #define HAL_PSSI_RDYPOL_ACTIVE_LOW        0x0U            /*!< Active Low */
@@ -212,10 +210,10 @@
   * @}
   */
 
-/** @defgroup PSSI_CLOCK_POLARITY PSSI Clock Polarity
+/** @defgroup Clock_Polarity Clock Polarity
   * @{
   */
-#define HAL_PSSI_FALLING_EDGE             0x0U            /*!< Falling Edge */
+#define HAL_PSSI_FALLING_EDGE             0x0U            /*!< Fallling Edge */
 #define HAL_PSSI_RISING_EDGE              0x1U            /*!< Rising Edge */
 
 
@@ -235,12 +233,12 @@
 #define PSSI_CR_OUTEN_OUTPUT        PSSI_CR_OUTEN    /*!< Output Mode     */
 
 #define PSSI_CR_DMA_ENABLE          PSSI_CR_DMAEN    /*!< DMA Mode Enable */
-#define PSSI_CR_DMA_DISABLE         (~PSSI_CR_DMAEN) /*!< DMA Mode Disable */
+#define PSSI_CR_DMA_DISABLE         (~PSSI_CR_DMAEN) /*!< DMA Mode Disable*/
 
 #define PSSI_CR_16BITS              PSSI_CR_EDM      /*!< 16 Lines Mode   */
 #define PSSI_CR_8BITS               (~PSSI_CR_EDM)   /*!< 8 Lines Mode    */
 
-#define PSSI_FLAG_RTT1B             PSSI_SR_RTT1B    /*!< 1 Byte Fifo Flag*/
+#define PSSI_FLAG_RTT1B             PSSI_SR_RTT1B    /*!< 1 Byte Fifo Flag */
 #define PSSI_FLAG_RTT4B             PSSI_SR_RTT4B    /*!< 4 Bytes Fifo Flag*/
 
 
@@ -249,7 +247,7 @@
   * @}
   */
 
-/** @defgroup PSSI_INTERRUPTS PSSI Interrupts
+/** @defgroup PSSI_Interrupts PSSI Interrupts
   * @{
   */
 
@@ -377,6 +375,8 @@
                                              ((__CONTROL__) == HAL_PSSI_DE_MAP_ENABLE         ) || \
                                              ((__CONTROL__) == HAL_PSSI_MAP_DE_BIDIR_ENABLE   ))
 
+
+
 /**
   * @brief  Check whether the PSSI Bus Width is valid.
   * @param  __BUSWIDTH__ PSSI Bush width
@@ -386,8 +386,8 @@
 #define IS_PSSI_BUSWIDTH(__BUSWIDTH__) (((__BUSWIDTH__) == HAL_PSSI_8LINES    ) || \
                                         ((__BUSWIDTH__) == HAL_PSSI_16LINES   ))
 
-
 /**
+
   * @brief  Check whether the PSSI Clock Polarity is valid.
   * @param  __CLOCKPOL__ PSSI Clock Polarity
   * @retval Valid or not.
@@ -396,6 +396,7 @@
 #define IS_PSSI_CLOCK_POLARITY(__CLOCKPOL__) (((__CLOCKPOL__) == HAL_PSSI_FALLING_EDGE   ) || \
                                               ((__CLOCKPOL__) == HAL_PSSI_RISING_EDGE    ))
 
+
 /**
   * @brief  Check whether the PSSI Data Enable Polarity is valid.
   * @param  __DEPOL__ PSSI DE Polarity
@@ -412,18 +413,18 @@
   */
 
 #define IS_PSSI_RDY_POLARITY(__RDYPOL__) (((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_LOW   ) || \
-                                         ((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_HIGH   ))
+                                          ((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_HIGH   ))
 /**
   * @}
   */
 
 
 /* Exported functions --------------------------------------------------------*/
-/** @defgroup PSSI_Exported_Functions PSSI Exported Functions
+/** @addtogroup PSSI_Exported_Functions PSSI Exported Functions
   * @{
   */
 
-/** @defgroup PSSI_Exported_Functions_Group1 Initialization and de-initialization functions
+/** @addtogroup PSSI_Exported_Functions_Group1 Initialization and de-initialization functions
   * @{
   */
 
@@ -434,7 +435,8 @@
 void              HAL_PSSI_MspDeInit(PSSI_HandleTypeDef *hpssi);
 /* Callbacks Register/UnRegister functions  ***********************************/
 
-HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID, pPSSI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID,
+                                            pPSSI_CallbackTypeDef pCallback);
 HAL_StatusTypeDef HAL_PSSI_UnRegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID);
 
 
@@ -443,7 +445,7 @@
   */
 
 
-/** @defgroup PSSI_Exported_Functions_Group2 IO operation functions
+/** @addtogroup PSSI_Exported_Functions_Group2 Input and Output operation functions
   * @{
   */
 
@@ -453,27 +455,12 @@
 HAL_StatusTypeDef HAL_PSSI_Transmit_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size);
 HAL_StatusTypeDef HAL_PSSI_Receive_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size);
 HAL_StatusTypeDef HAL_PSSI_Abort_DMA(PSSI_HandleTypeDef *hpssi);
-void HAL_PSSI_IRQHandler(PSSI_HandleTypeDef *hpssi);
 
 /**
   * @}
   */
 
-/** @defgroup PSSI_Exported_Functions_Group3 Peripheral Control functions
-  * @{
-  */
-
-void HAL_PSSI_TxCpltCallback(PSSI_HandleTypeDef *hpssi);
-void HAL_PSSI_RxCpltCallback(PSSI_HandleTypeDef *hpssi);
-void HAL_PSSI_ErrorCallback(PSSI_HandleTypeDef *hpssi);
-void HAL_PSSI_AbortCpltCallback(PSSI_HandleTypeDef *hpssi);
-
-
-/**
-  * @}
-  */
-
-/** @defgroup PSSI_Exported_Functions_Group4 Peripheral State and Error functions
+/** @addtogroup PSSI_Exported_Functions_Group3 Peripheral State and Error functions
   * @{
   */
 
@@ -485,6 +472,23 @@
   * @}
   */
 
+/** @addtogroup PSSI_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+  * @{
+  */
+
+void HAL_PSSI_IRQHandler(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_TxCpltCallback(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_RxCpltCallback(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_ErrorCallback(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_AbortCpltCallback(PSSI_HandleTypeDef *hpssi);
+
+
+/**
+  * @}
+  */
+
+
+
 /**
   * @}
   */
@@ -494,7 +498,7 @@
 
 /* Private macros ------------------------------------------------------------*/
 
-#endif /* HAL_PSSI_MODULE_ENABLED */
+
 /**
   * @}
   */
@@ -510,3 +514,4 @@
 #endif
 
 #endif /* STM32L4xx_HAL_PSSI_H */
+
diff --git a/Inc/stm32l4xx_hal_rcc.h b/Inc/stm32l4xx_hal_rcc.h
index 260918d..f53e208 100644
--- a/Inc/stm32l4xx_hal_rcc.h
+++ b/Inc/stm32l4xx_hal_rcc.h
@@ -4441,7 +4441,7 @@
   *            @arg @ref RCC_MCO1SOURCE_SYSCLK  System  clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_MSI  MSI clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_HSI  HSI clock selected as MCO source
-  *            @arg @ref RCC_MCO1SOURCE_HSE  HSE clock selected as MCO sourcee
+  *            @arg @ref RCC_MCO1SOURCE_HSE  HSE clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_PLLCLK  Main PLL clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_LSI  LSI clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_LSE  LSE clock selected as MCO source
diff --git a/Inc/stm32l4xx_hal_rng.h b/Inc/stm32l4xx_hal_rng.h
index dd15099..17762e8 100644
--- a/Inc/stm32l4xx_hal_rng.h
+++ b/Inc/stm32l4xx_hal_rng.h
@@ -21,7 +21,7 @@
 #define STM32L4xx_HAL_RNG_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -52,7 +52,7 @@
 {
   uint32_t                    ClockErrorDetection; /*!< CED Clock error detection */
 } RNG_InitTypeDef;
-#endif /* defined(RNG_CR_CED) */
+#endif /* RNG_CR_CED */
 
 /**
   * @}
@@ -82,19 +82,19 @@
 typedef struct  __RNG_HandleTypeDef
 #else
 typedef struct
-#endif /* (USE_HAL_RNG_REGISTER_CALLBACKS) */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
 {
   RNG_TypeDef                 *Instance;    /*!< Register base address   */
 #if defined(RNG_CR_CED)
 
   RNG_InitTypeDef             Init;         /*!< RNG configuration parameters */
-#endif /* defined(RNG_CR_CED) */
+#endif /* RNG_CR_CED */
 
   HAL_LockTypeDef             Lock;         /*!< RNG locking object      */
 
   __IO HAL_RNG_StateTypeDef   State;        /*!< RNG communication state */
 
-  __IO  uint32_t              ErrorCode;     /*!< RNG Error code               */
+  __IO  uint32_t              ErrorCode;    /*!< RNG Error code          */
 
   uint32_t                    RandomNumber; /*!< Last Generated RNG Data */
 
@@ -172,18 +172,18 @@
   * @}
   */
 
-#endif /* defined(RNG_CR_CED) */
+#endif /* RNG_CR_CED */
 /** @defgroup RNG_Error_Definition   RNG Error Definition
   * @{
   */
-#define  HAL_RNG_ERROR_NONE             0x00000000U    /*!< No error             */
+#define  HAL_RNG_ERROR_NONE             0x00000000U    /*!< No error          */
 #if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
 #define  HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U    /*!< Invalid Callback error  */
 #endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
-#define  HAL_RNG_ERROR_TIMEOUT          0x00000002U    /*!< Timeout error        */
+#define  HAL_RNG_ERROR_TIMEOUT          0x00000002U    /*!< Timeout error     */
 #define  HAL_RNG_ERROR_BUSY             0x00000004U    /*!< Busy error        */
 #define  HAL_RNG_ERROR_SEED             0x00000008U    /*!< Seed error        */
-#define  HAL_RNG_ERROR_CLOCK            0x00000010U   /*!< Clock error        */
+#define  HAL_RNG_ERROR_CLOCK            0x00000010U    /*!< Clock error       */
 /**
   * @}
   */
@@ -209,7 +209,7 @@
                                                     } while(0U)
 #else
 #define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
-#endif /*USE_HAL_RNG_REGISTER_CALLBACKS */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
 
 /**
   * @brief  Enables the RNG peripheral.
@@ -290,9 +290,9 @@
   */
 
 #if defined (RNG_CR_CONDRST)
-/* Include HASH HAL Extended module */
+/* Include RNG HAL Extended module */
 #include "stm32l4xx_hal_rng_ex.h"
-#endif  /* CONDRST */
+#endif  /* RNG_CR_CONDRST */
 /* Exported functions --------------------------------------------------------*/
 /** @defgroup RNG_Exported_Functions RNG Exported Functions
   * @{
@@ -308,7 +308,8 @@
 
 /* Callbacks Register/UnRegister functions  ***********************************/
 #if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+                                           pRNG_CallbackTypeDef pCallback);
 HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID);
 
 HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback);
@@ -322,11 +323,13 @@
 /** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
   * @{
   */
-uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng);    /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead    */
-uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef
+                                 *hrng);    /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead    */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef
+                                    *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
 HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
 HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
-uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_ReadLastRandomNumber(const RNG_HandleTypeDef *hrng);
 
 void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
 void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
@@ -339,8 +342,8 @@
 /** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
   * @{
   */
-HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
-uint32_t             HAL_RNG_GetError(RNG_HandleTypeDef *hrng);
+HAL_RNG_StateTypeDef HAL_RNG_GetState(const RNG_HandleTypeDef *hrng);
+uint32_t             HAL_RNG_GetError(const RNG_HandleTypeDef *hrng);
 /**
   * @}
   */
@@ -357,8 +360,8 @@
                        ((IT) == RNG_IT_SEI))
 
 #define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
-                            ((FLAG) == RNG_FLAG_CECS) || \
-                            ((FLAG) == RNG_FLAG_SECS))
+                           ((FLAG) == RNG_FLAG_CECS) || \
+                           ((FLAG) == RNG_FLAG_SECS))
 
 #if defined(RNG_CR_CED)
 /**
@@ -368,11 +371,21 @@
   */
 #define IS_RNG_CED(__MODE__)   (((__MODE__) == RNG_CED_ENABLE) || \
                                 ((__MODE__) == RNG_CED_DISABLE))
-#endif /* defined(RNG_CR_CED) */
+#endif /* RNG_CR_CED */
 /**
   * @}
   */
 
+#if defined(RNG_CR_CONDRST)
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Functions RNG Private functions
+  * @{
+  */
+HAL_StatusTypeDef RNG_RecoverSeedError(RNG_HandleTypeDef *hrng);
+/**
+  * @}
+  */
+#endif /* RNG_CR_CONDRST */
 /**
   * @}
   */
@@ -389,3 +402,4 @@
 
 
 #endif /* STM32L4xx_HAL_RNG_H */
+
diff --git a/Inc/stm32l4xx_hal_rng_ex.h b/Inc/stm32l4xx_hal_rng_ex.h
index 7d39f89..deb5327 100644
--- a/Inc/stm32l4xx_hal_rng_ex.h
+++ b/Inc/stm32l4xx_hal_rng_ex.h
@@ -21,7 +21,7 @@
 #define STM32L4xx_HAL_RNG_EX_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -31,21 +31,22 @@
   * @{
   */
 
-#if defined (RNG)
+#if defined(RNG)
+#if defined(RNG_CR_CONDRST)
 
-/** @defgroup RNGEx RNGEx
+/** @defgroup RNG_Ex RNG_Ex
   * @brief RNG Extension HAL module driver
   * @{
   */
 
 /* Exported types ------------------------------------------------------------*/
-/** @defgroup RNGEx_Exported_Types RNGEx Exported Types
-  * @brief RNGEx Exported types
+/** @defgroup RNG_Ex_Exported_Types RNG_Ex Exported Types
+  * @brief RNG_Ex Exported types
   * @{
   */
 
 /**
-  * @brief RNGEX Configuration Structure definition
+  * @brief RNG_Ex Configuration Structure definition
   */
 
 typedef struct
@@ -54,9 +55,9 @@
   uint32_t        Config2;           /*!< Config2 must be a value between 0 and 0x7 */
   uint32_t        Config3;           /*!< Config3 must be a value between 0 and 0xF */
   uint32_t        ClockDivider;      /*!< Clock Divider factor.This parameter can
-                                          be a value of @ref RNGEX_Clock_Divider_Factor   */
+                                          be a value of @ref RNG_Ex_Clock_Divider_Factor   */
   uint32_t        NistCompliance;    /*!< NIST compliance.This parameter can be a
-                                          value of @ref RNGEX_NIST_Compliance   */
+                                          value of @ref RNG_Ex_NIST_Compliance   */
 } RNG_ConfigTypeDef;
 
 /**
@@ -64,54 +65,54 @@
   */
 
 /* Exported constants --------------------------------------------------------*/
-/** @defgroup RNGEX_Exported_Constants RNGEX Exported Constants
+/** @defgroup RNG_Ex_Exported_Constants RNG_Ex Exported Constants
   * @{
   */
 
-/** @defgroup RNGEX_Clock_Divider_Factor  Value used to configure an internal
- *            programmable divider acting on the incoming RNG clock
+/** @defgroup RNG_Ex_Clock_Divider_Factor  Value used to configure an internal
+  *            programmable divider acting on the incoming RNG clock
   * @{
   */
 #define RNG_CLKDIV_BY_1       (0x00000000UL)      /*!< No clock division  */
 #define RNG_CLKDIV_BY_2       (RNG_CR_CLKDIV_0)
-                           /*!< 2 RNG clock cycles per internal RNG clock    */
+/*!< 2 RNG clock cycles per internal RNG clock    */
 #define RNG_CLKDIV_BY_4       (RNG_CR_CLKDIV_1)
-                           /*!< 4 RNG clock cycles per internal RNG clock    */
+/*!< 4 RNG clock cycles per internal RNG clock    */
 #define RNG_CLKDIV_BY_8       (RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                           /*!< 8 RNG clock cycles per internal RNG clock    */
+/*!< 8 RNG clock cycles per internal RNG clock    */
 #define RNG_CLKDIV_BY_16      (RNG_CR_CLKDIV_2)
-                           /*!< 16 RNG clock cycles per internal RNG clock   */
+/*!< 16 RNG clock cycles per internal RNG clock   */
 #define RNG_CLKDIV_BY_32      (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0)
-                           /*!< 32 RNG clock cycles per internal RNG clock   */
+/*!< 32 RNG clock cycles per internal RNG clock   */
 #define RNG_CLKDIV_BY_64      (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1)
-                           /*!< 64 RNG clock cycles per internal RNG clock   */
+/*!< 64 RNG clock cycles per internal RNG clock   */
 #define RNG_CLKDIV_BY_128     (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                           /*!< 128 RNG clock cycles per internal RNG clock  */
+/*!< 128 RNG clock cycles per internal RNG clock  */
 #define RNG_CLKDIV_BY_256     (RNG_CR_CLKDIV_3)
-                           /*!< 256 RNG clock cycles per internal RNG clock  */
+/*!< 256 RNG clock cycles per internal RNG clock  */
 #define RNG_CLKDIV_BY_512     (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_0)
-                           /*!< 512 RNG clock cycles per internal RNG clock  */
+/*!< 512 RNG clock cycles per internal RNG clock  */
 #define RNG_CLKDIV_BY_1024    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1)
-                           /*!< 1024 RNG clock cycles per internal RNG clock */
+/*!< 1024 RNG clock cycles per internal RNG clock */
 #define RNG_CLKDIV_BY_2048    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                          /*!< 2048 RNG clock cycles per internal RNG clock  */
+/*!< 2048 RNG clock cycles per internal RNG clock  */
 #define RNG_CLKDIV_BY_4096    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2)
-                           /*!< 4096 RNG clock cycles per internal RNG clock  */
+/*!< 4096 RNG clock cycles per internal RNG clock  */
 #define RNG_CLKDIV_BY_8192    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0)
-                          /*!< 8192 RNG clock cycles per internal RNG clock  */
+/*!< 8192 RNG clock cycles per internal RNG clock  */
 #define RNG_CLKDIV_BY_16384   (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1)
-                          /*!< 16384 RNG clock cycles per internal RNG clock */
+/*!< 16384 RNG clock cycles per internal RNG clock */
 #define RNG_CLKDIV_BY_32768   (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                          /*!< 32768 RNG clock cycles per internal RNG clock */
+/*!< 32768 RNG clock cycles per internal RNG clock */
 /**
   * @}
   */
 
-/** @defgroup RNGEX_NIST_Compliance  NIST Compliance configuration
+/** @defgroup RNG_Ex_NIST_Compliance  NIST Compliance configuration
   * @{
   */
 #define RNG_NIST_COMPLIANT     (0x00000000UL) /*!< NIST compliant configuration*/
-#define RNG_CUSTOM_NIST        (RNG_CR_NISTC) /*!< Custom NIST configuration   */
+#define RNG_CUSTOM_NIST        (RNG_CR_NISTC) /*!< Custom NIST configuration */
 
 /**
   * @}
@@ -122,7 +123,7 @@
   */
 
 /* Private types -------------------------------------------------------------*/
-/** @defgroup RNGEx_Private_Types RNGEx Private Types
+/** @defgroup RNG_Ex_Private_Types RNG_Ex Private Types
   * @{
   */
 
@@ -131,7 +132,16 @@
   */
 
 /* Private variables ---------------------------------------------------------*/
-/** @defgroup RNGEx_Private_Variables RNGEx Private Variables
+/** @defgroup RNG_Ex_Private_Variables RNG_Ex Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RNG_Ex_Private_Constants RNG_Ex Private Constants
   * @{
   */
 
@@ -140,7 +150,7 @@
   */
 
 /* Private macros ------------------------------------------------------------*/
-/** @defgroup RNGEx_Private_Macros RNGEx Private Macros
+/** @defgroup RNG_Ex_Private_Macros RNG_Ex Private Macros
   * @{
   */
 
@@ -173,11 +183,11 @@
 
 
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private functions ---------------------------------------------------------*/
-/** @defgroup RNGEx_Private_Functions RNGEx Private Functions
+/** @defgroup RNG_Ex_Private_Functions RNG_Ex Private Functions
   * @{
   */
 
@@ -186,14 +196,14 @@
   */
 
 /* Exported functions --------------------------------------------------------*/
-/** @defgroup RNGEx_Exported_Functions RNGEx Exported Functions
+/** @addtogroup RNG_Ex_Exported_Functions
   * @{
   */
 
-/** @addtogroup RNGEx_Exported_Functions_Group1
+/** @addtogroup RNG_Ex_Exported_Functions_Group1
   * @{
   */
-HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf);
+HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, const RNG_ConfigTypeDef *pConf);
 HAL_StatusTypeDef HAL_RNGEx_GetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf);
 HAL_StatusTypeDef HAL_RNGEx_LockConfig(RNG_HandleTypeDef *hrng);
 
@@ -201,6 +211,11 @@
   * @}
   */
 
+/** @addtogroup RNG_Ex_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_RNGEx_RecoverSeedError(RNG_HandleTypeDef *hrng);
+
 /**
   * @}
   */
@@ -213,6 +228,11 @@
   * @}
   */
 
+/**
+  * @}
+  */
+
+#endif /* RNG_CR_CONDRST */
 #endif /* RNG */
 
 /**
@@ -224,4 +244,5 @@
 #endif
 
 
-#endif /* STM32L4xx_HAL_RNGEX_H */
+#endif /* STM32L4xx_HAL_RNG_EX_H */
+
diff --git a/Inc/stm32l4xx_hal_rtc.h b/Inc/stm32l4xx_hal_rtc.h
index 428c5ad..2746b16 100644
--- a/Inc/stm32l4xx_hal_rtc.h
+++ b/Inc/stm32l4xx_hal_rtc.h
@@ -993,9 +993,15 @@
                                             RTC_DR_DU)
 
 #define RTC_INIT_MASK                       0xFFFFFFFFu
-#if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx)
+
+#if defined(STM32L412xx) || defined(STM32L422xx)
+#define RTC_ICSR_RESERVED_MASK              0x000100FCu
+#define RTC_RSF_MASK                        (~(RTC_ICSR_INIT | RTC_ICSR_RSF))
+#elif defined (STM32L4P5xx) || defined (STM32L4Q5xx)
+#define RTC_ICSR_RESERVED_MASK              0x00011FFCu
 #define RTC_RSF_MASK                        (~(RTC_ICSR_INIT | RTC_ICSR_RSF))
 #else
+#define RTC_ISR_RESERVED_MASK               0x0003FFFFu
 #define RTC_RSF_MASK                        (~(RTC_ISR_INIT | RTC_ISR_RSF))
 #endif
 
diff --git a/Inc/stm32l4xx_hal_rtc_ex.h b/Inc/stm32l4xx_hal_rtc_ex.h
index a022b1b..0e1b278 100644
--- a/Inc/stm32l4xx_hal_rtc_ex.h
+++ b/Inc/stm32l4xx_hal_rtc_ex.h
@@ -1616,7 +1616,7 @@
 #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
                                  ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
 
-#define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & (uint32_t)0xFFB6FFFB) == 0x00) && ((INTERRUPT) != 0U))
+#define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & 0xFFB6FFFBU) == 0x00U) && ((INTERRUPT) != 0U))
 
 #define IS_RTC_TIMESTAMP_PIN(PIN)  (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
 
@@ -1647,7 +1647,7 @@
 #define IS_RTC_TAMPER(__TAMPER__)                ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \
                                                   (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U))
 #else
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != 0U))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & 0xFFFFFFD6U) == 0x00U) && ((TAMPER) != 0U))
 #endif
 
 
@@ -1711,7 +1711,7 @@
                                       ((BDCU) == RTC_BINARY_MIX_BCDU_6) || \
                                       ((BDCU) == RTC_BINARY_MIX_BCDU_7))
 
-#define IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(MASK)   (((MASK) == 0u) || \
+#define IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(MASK)   (((MASK) == 0U) || \
                                                     (((MASK) >= RTC_ALARMSUBSECONDBINMASK_SS31_1) && ((MASK) <= RTC_ALARMSUBSECONDBINMASK_NONE)))
 
 #define IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(SEL) (((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_NO) || \
diff --git a/Inc/stm32l4xx_hal_sd.h b/Inc/stm32l4xx_hal_sd.h
index acda387..70ff681 100644
--- a/Inc/stm32l4xx_hal_sd.h
+++ b/Inc/stm32l4xx_hal_sd.h
@@ -748,7 +748,6 @@
 /** @defgroup SD_Exported_Functions_Group4 SD card related functions
   * @{
   */
-HAL_StatusTypeDef       HAL_SD_SendSDStatus (SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
 HAL_SD_CardStateTypeDef HAL_SD_GetCardState (SD_HandleTypeDef *hsd);
 HAL_StatusTypeDef       HAL_SD_GetCardCID   (SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
 HAL_StatusTypeDef       HAL_SD_GetCardCSD   (SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
@@ -834,7 +833,9 @@
 /** @defgroup SD_Private_Functions SD Private Functions
   * @{
   */
-
+#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+uint32_t SD_HighSpeed(SD_HandleTypeDef *hsd);
+#endif /* STM32L4P5xx && STM32L4Q5xx && STM32L4R5xx && STM32L4R7xx && STM32L4R9xx && STM32L4S5xx && STM32L4S7xx && STM32L4S9xx */
 /**
   * @}
   */
diff --git a/Inc/stm32l4xx_hal_smbus.h b/Inc/stm32l4xx_hal_smbus.h
index 83ff066..7ae5e80 100644
--- a/Inc/stm32l4xx_hal_smbus.h
+++ b/Inc/stm32l4xx_hal_smbus.h
@@ -751,8 +751,8 @@
   */
 
 /* Peripheral State and Errors functions  **************************************************/
-uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus);
 
 /**
   * @}
diff --git a/Inc/stm32l4xx_hal_sram.h b/Inc/stm32l4xx_hal_sram.h
index a654be2..938baf4 100644
--- a/Inc/stm32l4xx_hal_sram.h
+++ b/Inc/stm32l4xx_hal_sram.h
@@ -205,7 +205,7 @@
   */
 
 /* SRAM  State functions ******************************************************/
-HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram);
 
 /**
   * @}
diff --git a/Inc/stm32l4xx_hal_swpmi.h b/Inc/stm32l4xx_hal_swpmi.h
index 586259c..7c47422 100644
--- a/Inc/stm32l4xx_hal_swpmi.h
+++ b/Inc/stm32l4xx_hal_swpmi.h
@@ -93,7 +93,7 @@
 
   SWPMI_InitTypeDef              Init;          /*!< SWPMI communication parameters       */
 
-  uint32_t                       *pTxBuffPtr;   /*!< Pointer to SWPMI Tx transfer Buffer  */
+  const uint32_t                 *pTxBuffPtr;   /*!< Pointer to SWPMI Tx transfer Buffer  */
 
   uint32_t                       TxXferSize;    /*!< SWPMI Tx Transfer size               */
 
@@ -405,11 +405,11 @@
 #endif
 
 /* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, const uint32_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_SWPMI_Receive(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, const uint32_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SWPMI_Receive_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, const uint32_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SWPMI_Receive_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SWPMI_DMAStop(SWPMI_HandleTypeDef *hswpmi);
 HAL_StatusTypeDef HAL_SWPMI_EnableLoopback(SWPMI_HandleTypeDef *hswpmi);
@@ -422,8 +422,8 @@
 void              HAL_SWPMI_ErrorCallback(SWPMI_HandleTypeDef *hswpmi);
 
 /* Peripheral Control and State functions  ************************************/
-HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(SWPMI_HandleTypeDef *hswpmi);
-uint32_t               HAL_SWPMI_GetError(SWPMI_HandleTypeDef *hswpmi);
+HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(const SWPMI_HandleTypeDef *hswpmi);
+uint32_t               HAL_SWPMI_GetError(const SWPMI_HandleTypeDef *hswpmi);
 
 /**
   * @}
diff --git a/Inc/stm32l4xx_hal_tim.h b/Inc/stm32l4xx_hal_tim.h
index 4d5ab44..6cbfe7a 100644
--- a/Inc/stm32l4xx_hal_tim.h
+++ b/Inc/stm32l4xx_hal_tim.h
@@ -1818,6 +1818,10 @@
                                             ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
                                             ((__PRESCALER__) == TIM_ICPSC_DIV8))
 
+#define IS_TIM_CCX_CHANNEL(__INSTANCE__, __CHANNEL__) (IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) && \
+                                                       ((__CHANNEL__) != (TIM_CHANNEL_5)) && \
+                                                       ((__CHANNEL__) != (TIM_CHANNEL_6)))
+
 #define IS_TIM_OPM_MODE(__MODE__)          (((__MODE__) == TIM_OPMODE_SINGLE) || \
                                             ((__MODE__) == TIM_OPMODE_REPETITIVE))
 
@@ -2232,7 +2236,7 @@
   * @{
   */
 /* Timer Encoder functions ****************************************************/
-HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig);
 HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
 void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
 void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
diff --git a/Inc/stm32l4xx_hal_tim_ex.h b/Inc/stm32l4xx_hal_tim_ex.h
index 730a37e..ca77ed7 100644
--- a/Inc/stm32l4xx_hal_tim_ex.h
+++ b/Inc/stm32l4xx_hal_tim_ex.h
@@ -86,103 +86,103 @@
 /** @defgroup TIMEx_Remap TIM Extended Remapping
   * @{
   */
-#define TIM_TIM1_ETR_ADC1_NONE      0x00000000U                                           /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
-#define TIM_TIM1_ETR_ADC1_AWD1      TIM1_OR1_ETR_ADC1_RMP_0                               /* !< TIM1_ETR is connected to ADC1 AWD1 */
-#define TIM_TIM1_ETR_ADC1_AWD2      TIM1_OR1_ETR_ADC1_RMP_1                               /* !< TIM1_ETR is connected to ADC1 AWD2 */
-#define TIM_TIM1_ETR_ADC1_AWD3      (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0)   /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM1_ETR_ADC1_NONE      0x00000000U                                           /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ETR_ADC1_AWD1      TIM1_OR1_ETR_ADC1_RMP_0                               /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ETR_ADC1_AWD2      TIM1_OR1_ETR_ADC1_RMP_1                               /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ETR_ADC1_AWD3      (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0)   /*!< TIM1_ETR is connected to ADC1 AWD3 */
 #if defined (ADC3)
-#define TIM_TIM1_ETR_ADC3_NONE      0x00000000U                                           /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
-#define TIM_TIM1_ETR_ADC3_AWD1      TIM1_OR1_ETR_ADC3_RMP_0                               /* !< TIM1_ETR is connected to ADC3 AWD1 */
-#define TIM_TIM1_ETR_ADC3_AWD2      TIM1_OR1_ETR_ADC3_RMP_1                               /* !< TIM1_ETR is connected to ADC3 AWD2 */
-#define TIM_TIM1_ETR_ADC3_AWD3      (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0)   /* !< TIM1_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM1_ETR_ADC3_NONE      0x00000000U                                           /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ETR_ADC3_AWD1      TIM1_OR1_ETR_ADC3_RMP_0                               /*!< TIM1_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM1_ETR_ADC3_AWD2      TIM1_OR1_ETR_ADC3_RMP_1                               /*!< TIM1_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM1_ETR_ADC3_AWD3      (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0)   /*!< TIM1_ETR is connected to ADC3 AWD3 */
 #endif /* ADC3 */
-#define TIM_TIM1_TI1_GPIO           0x00000000U                                           /* !< TIM1 TI1 is connected to GPIO */
-#define TIM_TIM1_TI1_COMP1          TIM1_OR1_TI1_RMP                                      /* !< TIM1 TI1 is connected to COMP1 */
-#define TIM_TIM1_ETR_GPIO           0x00000000U                                           /* !< TIM1_ETR is connected to GPIO */
-#define TIM_TIM1_ETR_COMP1          TIM1_OR2_ETRSEL_0                                     /* !< TIM1_ETR is connected to COMP1 output */
+#define TIM_TIM1_TI1_GPIO           0x00000000U                                           /*!< TIM1 TI1 is connected to GPIO */
+#define TIM_TIM1_TI1_COMP1          TIM1_OR1_TI1_RMP                                      /*!< TIM1 TI1 is connected to COMP1 */
+#define TIM_TIM1_ETR_GPIO           0x00000000U                                           /*!< TIM1_ETR is connected to GPIO */
+#define TIM_TIM1_ETR_COMP1          TIM1_OR2_ETRSEL_0                                     /*!< TIM1_ETR is connected to COMP1 output */
 #if defined(COMP2)
-#define TIM_TIM1_ETR_COMP2          TIM1_OR2_ETRSEL_1                                     /* !< TIM1_ETR is connected to COMP2 output */
+#define TIM_TIM1_ETR_COMP2          TIM1_OR2_ETRSEL_1                                     /*!< TIM1_ETR is connected to COMP2 output */
 #endif /* COMP2 */
 
 #if defined (USB_OTG_FS)
-#define TIM_TIM2_ITR1_TIM8_TRGO     0x00000000U                                           /* !< TIM2_ITR1 is connected to TIM8_TRGO */
-#define TIM_TIM2_ITR1_OTG_FS_SOF    TIM2_OR1_ITR1_RMP                                     /* !< TIM2_ITR1 is connected to OTG_FS SOF */
+#define TIM_TIM2_ITR1_TIM8_TRGO     0x00000000U                                           /*!< TIM2_ITR1 is connected to TIM8_TRGO */
+#define TIM_TIM2_ITR1_OTG_FS_SOF    TIM2_OR1_ITR1_RMP                                     /*!< TIM2_ITR1 is connected to OTG_FS SOF */
 #else
 #if defined(STM32L471xx)
-#define TIM_TIM2_ITR1_TIM8_TRGO     0x00000000U                                           /* !< TIM2_ITR1 is connected to TIM8_TRGO */
-#define TIM_TIM2_ITR1_NONE          TIM2_OR1_ITR1_RMP                                     /* !< No internal trigger on TIM2_ITR1 */
+#define TIM_TIM2_ITR1_TIM8_TRGO     0x00000000U                                           /*!< TIM2_ITR1 is connected to TIM8_TRGO */
+#define TIM_TIM2_ITR1_NONE          TIM2_OR1_ITR1_RMP                                     /*!< No internal trigger on TIM2_ITR1 */
 #else
-#define TIM_TIM2_ITR1_NONE          0x00000000U                                           /* !< No internal trigger on TIM2_ITR1 */
-#define TIM_TIM2_ITR1_USB_SOF       TIM2_OR1_ITR1_RMP                                     /* !< TIM2_ITR1 is connected to USB SOF */
+#define TIM_TIM2_ITR1_NONE          0x00000000U                                           /*!< No internal trigger on TIM2_ITR1 */
+#define TIM_TIM2_ITR1_USB_SOF       TIM2_OR1_ITR1_RMP                                     /*!< TIM2_ITR1 is connected to USB SOF */
 #endif /* STM32L471xx */
 #endif /* USB_OTG_FS */
-#define TIM_TIM2_ETR_GPIO           0x00000000U                                           /* !< TIM2_ETR is connected to GPIO */
-#define TIM_TIM2_ETR_LSE            TIM2_OR1_ETR1_RMP                                     /* !< TIM2_ETR is connected to LSE */
-#define TIM_TIM2_ETR_COMP1          TIM2_OR2_ETRSEL_0                                     /* !< TIM2_ETR is connected to COMP1 output */
+#define TIM_TIM2_ETR_GPIO           0x00000000U                                           /*!< TIM2_ETR is connected to GPIO */
+#define TIM_TIM2_ETR_LSE            TIM2_OR1_ETR1_RMP                                     /*!< TIM2_ETR is connected to LSE */
+#define TIM_TIM2_ETR_COMP1          TIM2_OR2_ETRSEL_0                                     /*!< TIM2_ETR is connected to COMP1 output */
 #if defined(COMP2)
-#define TIM_TIM2_ETR_COMP2          TIM2_OR2_ETRSEL_1                                     /* !< TIM2_ETR is connected to COMP2 output */
+#define TIM_TIM2_ETR_COMP2          TIM2_OR2_ETRSEL_1                                     /*!< TIM2_ETR is connected to COMP2 output */
 #endif /* COMP2 */
-#define TIM_TIM2_TI4_GPIO           0x00000000U                                           /* !< TIM2 TI4 is connected to GPIO */
-#define TIM_TIM2_TI4_COMP1          TIM2_OR1_TI4_RMP_0                                    /* !< TIM2 TI4 is connected to COMP1 output */
+#define TIM_TIM2_TI4_GPIO           0x00000000U                                           /*!< TIM2 TI4 is connected to GPIO */
+#define TIM_TIM2_TI4_COMP1          TIM2_OR1_TI4_RMP_0                                    /*!< TIM2 TI4 is connected to COMP1 output */
 #if defined(COMP2)
-#define TIM_TIM2_TI4_COMP2          TIM2_OR1_TI4_RMP_1                                    /* !< TIM2 TI4 is connected to COMP2 output */
-#define TIM_TIM2_TI4_COMP1_COMP2    (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0)              /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */
+#define TIM_TIM2_TI4_COMP2          TIM2_OR1_TI4_RMP_1                                    /*!< TIM2 TI4 is connected to COMP2 output */
+#define TIM_TIM2_TI4_COMP1_COMP2    (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0)              /*!< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */
 #endif /* COMP2 */
 
 #if defined (TIM3)
-#define TIM_TIM3_TI1_GPIO           0x00000000U                                           /* !< TIM3 TI1 is connected to GPIO */
-#define TIM_TIM3_TI1_COMP1          TIM3_OR1_TI1_RMP_0                                    /* !< TIM3 TI1 is connected to COMP1 output */
-#define TIM_TIM3_TI1_COMP2          TIM3_OR1_TI1_RMP_1                                    /* !< TIM3 TI1 is connected to COMP2 output */
-#define TIM_TIM3_TI1_COMP1_COMP2    (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0)             /* !< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */
-#define TIM_TIM3_ETR_GPIO           0x00000000U                                           /* !< TIM3_ETR is connected to GPIO */
-#define TIM_TIM3_ETR_COMP1          TIM3_OR2_ETRSEL_0                                     /* !< TIM3_ETR is connected to COMP1 output */
+#define TIM_TIM3_TI1_GPIO           0x00000000U                                           /*!< TIM3 TI1 is connected to GPIO */
+#define TIM_TIM3_TI1_COMP1          TIM3_OR1_TI1_RMP_0                                    /*!< TIM3 TI1 is connected to COMP1 output */
+#define TIM_TIM3_TI1_COMP2          TIM3_OR1_TI1_RMP_1                                    /*!< TIM3 TI1 is connected to COMP2 output */
+#define TIM_TIM3_TI1_COMP1_COMP2    (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0)             /*!< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */
+#define TIM_TIM3_ETR_GPIO           0x00000000U                                           /*!< TIM3_ETR is connected to GPIO */
+#define TIM_TIM3_ETR_COMP1          TIM3_OR2_ETRSEL_0                                     /*!< TIM3_ETR is connected to COMP1 output */
 #endif /* TIM3 */
 
 #if defined (TIM8)
 #if defined(ADC2) && defined(ADC3)
-#define TIM_TIM8_ETR_ADC2_NONE      0x00000000U                                           /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/
-#define TIM_TIM8_ETR_ADC2_AWD1      TIM8_OR1_ETR_ADC2_RMP_0                               /* !< TIM8_ETR is connected to ADC2 AWD1 */
-#define TIM_TIM8_ETR_ADC2_AWD2      TIM8_OR1_ETR_ADC2_RMP_1                               /* !< TIM8_ETR is connected to ADC2 AWD2 */
-#define TIM_TIM8_ETR_ADC2_AWD3      (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0)   /* !< TIM8_ETR is connected to ADC2 AWD3 */
-#define TIM_TIM8_ETR_ADC3_NONE      0x00000000U                                           /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/
-#define TIM_TIM8_ETR_ADC3_AWD1      TIM8_OR1_ETR_ADC3_RMP_0                               /* !< TIM8_ETR is connected to ADC3 AWD1 */
-#define TIM_TIM8_ETR_ADC3_AWD2      TIM8_OR1_ETR_ADC3_RMP_1                               /* !< TIM8_ETR is connected to ADC3 AWD2 */
-#define TIM_TIM8_ETR_ADC3_AWD3      (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0)   /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM8_ETR_ADC2_NONE      0x00000000U                                           /*!< TIM8_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM8_ETR_ADC2_AWD1      TIM8_OR1_ETR_ADC2_RMP_0                               /*!< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ETR_ADC2_AWD2      TIM8_OR1_ETR_ADC2_RMP_1                               /*!< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ETR_ADC2_AWD3      (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0)   /*!< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM8_ETR_ADC3_NONE      0x00000000U                                           /*!< TIM8_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM8_ETR_ADC3_AWD1      TIM8_OR1_ETR_ADC3_RMP_0                               /*!< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ETR_ADC3_AWD2      TIM8_OR1_ETR_ADC3_RMP_1                               /*!< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ETR_ADC3_AWD3      (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0)   /*!< TIM8_ETR is connected to ADC3 AWD3 */
 #endif /* ADC2 && ADC3 */
 
-#define TIM_TIM8_TI1_GPIO           0x00000000U                                           /* !< TIM8 TI1 is connected to GPIO */
-#define TIM_TIM8_TI1_COMP2          TIM8_OR1_TI1_RMP                                      /* !< TIM8 TI1 is connected to COMP1 */
-#define TIM_TIM8_ETR_GPIO           0x00000000U                                           /* !< TIM8_ETR is connected to GPIO */
-#define TIM_TIM8_ETR_COMP1          TIM8_OR2_ETRSEL_0                                     /* !< TIM8_ETR is connected to COMP1 output */
-#define TIM_TIM8_ETR_COMP2          TIM8_OR2_ETRSEL_1                                     /* !< TIM8_ETR is connected to COMP2 output */
+#define TIM_TIM8_TI1_GPIO           0x00000000U                                           /*!< TIM8 TI1 is connected to GPIO */
+#define TIM_TIM8_TI1_COMP2          TIM8_OR1_TI1_RMP                                      /*!< TIM8 TI1 is connected to COMP1 */
+#define TIM_TIM8_ETR_GPIO           0x00000000U                                           /*!< TIM8_ETR is connected to GPIO */
+#define TIM_TIM8_ETR_COMP1          TIM8_OR2_ETRSEL_0                                     /*!< TIM8_ETR is connected to COMP1 output */
+#define TIM_TIM8_ETR_COMP2          TIM8_OR2_ETRSEL_1                                     /*!< TIM8_ETR is connected to COMP2 output */
 #endif /* TIM8 */
 
-#define TIM_TIM15_TI1_GPIO          0x00000000U                                           /* !< TIM15 TI1 is connected to GPIO */
-#define TIM_TIM15_TI1_LSE           TIM15_OR1_TI1_RMP                                     /* !< TIM15 TI1 is connected to LSE */
-#define TIM_TIM15_ENCODERMODE_NONE  0x00000000U                                           /* !< No redirection */
-#define TIM_TIM15_ENCODERMODE_TIM2  TIM15_OR1_ENCODER_MODE_0                              /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#define TIM_TIM15_TI1_GPIO          0x00000000U                                           /*!< TIM15 TI1 is connected to GPIO */
+#define TIM_TIM15_TI1_LSE           TIM15_OR1_TI1_RMP                                     /*!< TIM15 TI1 is connected to LSE */
+#define TIM_TIM15_ENCODERMODE_NONE  0x00000000U                                           /*!< No redirection */
+#define TIM_TIM15_ENCODERMODE_TIM2  TIM15_OR1_ENCODER_MODE_0                              /*!< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
 #if defined (TIM3)
-#define TIM_TIM15_ENCODERMODE_TIM3  TIM15_OR1_ENCODER_MODE_1                              /* !< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#define TIM_TIM15_ENCODERMODE_TIM3  TIM15_OR1_ENCODER_MODE_1                              /*!< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
 #endif /* TIM3 */
 #if defined (TIM4)
-#define TIM_TIM15_ENCODERMODE_TIM4  (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /* !< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#define TIM_TIM15_ENCODERMODE_TIM4  (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /*!< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
 #endif /* TIM4 */
 
-#define TIM_TIM16_TI1_GPIO          0x00000000U                                           /* !< TIM16 TI1 is connected to GPIO */
-#define TIM_TIM16_TI1_LSI           TIM16_OR1_TI1_RMP_0                                   /* !< TIM16 TI1 is connected to LSI */
-#define TIM_TIM16_TI1_LSE           TIM16_OR1_TI1_RMP_1                                   /* !< TIM16 TI1 is connected to LSE */
-#define TIM_TIM16_TI1_RTC           (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0)           /* !< TIM16 TI1 is connected to RTC wakeup interrupt */
+#define TIM_TIM16_TI1_GPIO          0x00000000U                                           /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_TI1_LSI           TIM16_OR1_TI1_RMP_0                                   /*!< TIM16 TI1 is connected to LSI */
+#define TIM_TIM16_TI1_LSE           TIM16_OR1_TI1_RMP_1                                   /*!< TIM16 TI1 is connected to LSE */
+#define TIM_TIM16_TI1_RTC           (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0)           /*!< TIM16 TI1 is connected to RTC wakeup interrupt */
 #if defined (TIM16_OR1_TI1_RMP_2)
-#define TIM_TIM16_TI1_MSI           TIM16_OR1_TI1_RMP_2                                   /* !< TIM16 TI1 is connected to MSI */
-#define TIM_TIM16_TI1_HSE_32        (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0)           /* !< TIM16 TI1 is connected to HSE div 32 */
-#define TIM_TIM16_TI1_MCO           (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1)           /* !< TIM16 TI1 is connected to MCO */
+#define TIM_TIM16_TI1_MSI           TIM16_OR1_TI1_RMP_2                                   /*!< TIM16 TI1 is connected to MSI */
+#define TIM_TIM16_TI1_HSE_32        (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0)           /*!< TIM16 TI1 is connected to HSE div 32 */
+#define TIM_TIM16_TI1_MCO           (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1)           /*!< TIM16 TI1 is connected to MCO */
 #endif /* TIM16_OR1_TI1_RMP_2 */
 
 #if defined (TIM17)
-#define TIM_TIM17_TI1_GPIO          0x00000000U                                           /* !< TIM17 TI1 is connected to GPIO */
-#define TIM_TIM17_TI1_MSI           TIM17_OR1_TI1_RMP_0                                   /* !< TIM17 TI1 is connected to MSI */
-#define TIM_TIM17_TI1_HSE_32        TIM17_OR1_TI1_RMP_1                                   /* !< TIM17 TI1 is connected to HSE div 32 */
-#define TIM_TIM17_TI1_MCO           (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0)           /* !< TIM17 TI1 is connected to MCO */
+#define TIM_TIM17_TI1_GPIO          0x00000000U                                           /*!< TIM17 TI1 is connected to GPIO */
+#define TIM_TIM17_TI1_MSI           TIM17_OR1_TI1_RMP_0                                   /*!< TIM17 TI1 is connected to MSI */
+#define TIM_TIM17_TI1_HSE_32        TIM17_OR1_TI1_RMP_1                                   /*!< TIM17 TI1 is connected to HSE div 32 */
+#define TIM_TIM17_TI1_MCO           (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0)           /*!< TIM17 TI1 is connected to MCO */
 #endif /* TIM17 */
 /**
   * @}
@@ -200,11 +200,11 @@
 /** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
   * @{
   */
-#define TIM_BREAKINPUTSOURCE_BKIN     0x00000001U                               /* !< An external source (GPIO) is connected to the BKIN pin  */
-#define TIM_BREAKINPUTSOURCE_COMP1    0x00000002U                               /* !< The COMP1 output is connected to the break input */
-#define TIM_BREAKINPUTSOURCE_COMP2    0x00000004U                               /* !< The COMP2 output is connected to the break input */
+#define TIM_BREAKINPUTSOURCE_BKIN     0x00000001U                               /*!< An external source (GPIO) is connected to the BKIN pin  */
+#define TIM_BREAKINPUTSOURCE_COMP1    0x00000002U                               /*!< The COMP1 output is connected to the break input */
+#define TIM_BREAKINPUTSOURCE_COMP2    0x00000004U                               /*!< The COMP2 output is connected to the break input */
 #if defined (DFSDM1_Channel0)
-#define TIM_BREAKINPUTSOURCE_DFSDM1   0x00000008U                               /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
+#define TIM_BREAKINPUTSOURCE_DFSDM1   0x00000008U                               /*!< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
 #endif /* DFSDM1_Channel0 */
 /**
   * @}
diff --git a/Inc/stm32l4xx_hal_tsc.h b/Inc/stm32l4xx_hal_tsc.h
index 3cd7887..6bfca36 100644
--- a/Inc/stm32l4xx_hal_tsc.h
+++ b/Inc/stm32l4xx_hal_tsc.h
@@ -727,7 +727,8 @@
                                          ((__VALUE__) == TSC_PG_PRESC_DIV128))
 
 #define IS_TSC_PG_PRESC_VS_CTPL(__PGPSC__, __CTPL__)    ((((__PGPSC__) == TSC_PG_PRESC_DIV1) && \
-                                                          ((__CTPL__) > TSC_CTPL_2CYCLES)) ||   \
+                                                          (((__CTPL__) == TSC_CTPL_1CYCLE) ||   \
+                                                           ((__CTPL__) > TSC_CTPL_2CYCLES))) ||   \
                                                          (((__PGPSC__) == TSC_PG_PRESC_DIV2) && \
                                                           ((__CTPL__) > TSC_CTPL_1CYCLE))  ||   \
                                                          (((__PGPSC__) > TSC_PG_PRESC_DIV2)  && \
@@ -740,7 +741,7 @@
                                          ((__VALUE__) == TSC_MCV_2047) || \
                                          ((__VALUE__) == TSC_MCV_4095) || \
                                          ((__VALUE__) == TSC_MCV_8191) || \
-                                          ((__VALUE__) == TSC_MCV_16383))
+                                         ((__VALUE__) == TSC_MCV_16383))
 
 #define IS_TSC_IODEF(__VALUE__)         (((__VALUE__) == TSC_IODEF_OUT_PP_LOW) || ((__VALUE__) == TSC_IODEF_IN_FLOAT))
 
@@ -828,8 +829,8 @@
 HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef *htsc);
 HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef *htsc);
 HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef *htsc);
-TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef *htsc, uint32_t gx_index);
-uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef *htsc, uint32_t gx_index);
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(const TSC_HandleTypeDef *htsc, uint32_t gx_index);
+uint32_t HAL_TSC_GroupGetValue(const TSC_HandleTypeDef *htsc, uint32_t gx_index);
 /**
   * @}
   */
@@ -838,7 +839,7 @@
   * @{
   */
 /* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef *htsc, TSC_IOConfigTypeDef *config);
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef *htsc, const TSC_IOConfigTypeDef *config);
 HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef *htsc, FunctionalState choice);
 /**
   * @}
@@ -854,8 +855,8 @@
   */
 
 /** @addtogroup TSC_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
+  * @{
+  */
 /******* TSC IRQHandler and Callbacks used in Interrupt mode */
 void HAL_TSC_IRQHandler(TSC_HandleTypeDef *htsc);
 void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef *htsc);
diff --git a/Inc/stm32l4xx_hal_uart_ex.h b/Inc/stm32l4xx_hal_uart_ex.h
index 2a1c197..d450962 100644
--- a/Inc/stm32l4xx_hal_uart_ex.h
+++ b/Inc/stm32l4xx_hal_uart_ex.h
@@ -189,7 +189,7 @@
 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
 
-HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart);
+HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart);
 
 
 /**
@@ -210,10 +210,13 @@
   * @param  __CLOCKSOURCE__ output variable.
   * @retval UART clocking source, written in __CLOCKSOURCE__.
   */
-#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) \
-    || defined (STM32L496xx) || defined (STM32L4A6xx) \
-    || defined (STM32L4P5xx) || defined (STM32L4Q5xx) \
-    || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) \
+ || defined (STM32L485xx) || defined (STM32L486xx) \
+ || defined (STM32L496xx) || defined (STM32L4A6xx) \
+ || defined (STM32L4P5xx) || defined (STM32L4Q5xx) \
+ || defined (STM32L4R5xx) || defined (STM32L4R7xx) \
+ || defined (STM32L4R9xx) || defined (STM32L4S5xx) \
+ || defined (STM32L4S7xx) || defined (STM32L4S9xx)
 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
   do {                                                        \
     if((__HANDLE__)->Instance == USART1)                      \
diff --git a/Inc/stm32l4xx_hal_usart.h b/Inc/stm32l4xx_hal_usart.h
index 037d003..5b2b06d 100644
--- a/Inc/stm32l4xx_hal_usart.h
+++ b/Inc/stm32l4xx_hal_usart.h
@@ -147,7 +147,7 @@
 
 #endif /* USART_CR1_FIFOEN */
 #if defined(USART_CR2_SLVEN)
-  uint32_t                      SlaveMode;               /*!< Enable/Disable UART SPI Slave Mode. This parameter can be a value
+  uint32_t                      SlaveMode;               /*!< Enable/Disable USART SPI Slave Mode. This parameter can be a value
                                                               of @ref USARTEx_Slave_Mode */
 
 #endif /* USART_CR2_SLVEN */
diff --git a/Inc/stm32l4xx_hal_usart_ex.h b/Inc/stm32l4xx_hal_usart_ex.h
index e94dce2..cd6dadb 100644
--- a/Inc/stm32l4xx_hal_usart_ex.h
+++ b/Inc/stm32l4xx_hal_usart_ex.h
@@ -45,7 +45,7 @@
   * @{
   */
 #define USART_WORDLENGTH_7B                  (USART_CR1_M1)   /*!< 7-bit long USART frame */
-#define USART_WORDLENGTH_8B                  (0x00000000U)              /*!< 8-bit long USART frame */
+#define USART_WORDLENGTH_8B                  (0x00000000U)    /*!< 8-bit long USART frame */
 #define USART_WORDLENGTH_9B                  (USART_CR1_M0)   /*!< 9-bit long USART frame */
 /**
   * @}
diff --git a/Inc/stm32l4xx_ll_adc.h b/Inc/stm32l4xx_ll_adc.h
index f8e3e2d..0765e7c 100644
--- a/Inc/stm32l4xx_ll_adc.h
+++ b/Inc/stm32l4xx_ll_adc.h
@@ -59,27 +59,27 @@
 
 #define ADC_REG_SQRX_REGOFFSET_MASK        (ADC_SQR1_REGOFFSET | ADC_SQR2_REGOFFSET \
                                             | ADC_SQR3_REGOFFSET | ADC_SQR4_REGOFFSET)
-#define ADC_SQRX_REGOFFSET_POS             (8UL) /* Position of bits ADC_SQRx_REGOFFSET in ADC_REG_SQRX_REGOFFSET_MASK */
+#define ADC_SQRX_REGOFFSET_POS             (8UL) /* Position of bits ADC_SQRx_REGOFFSET in ADC_REG_SQRX_REGOFFSET_MASK*/
 #define ADC_REG_RANK_ID_SQRX_MASK          (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0)
 
 /* Definition of ADC group regular sequencer bits information to be inserted  */
 /* into ADC group regular sequencer ranks literals definition.                */
-#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS  ( 6UL) /* Value equivalent to bitfield "ADC_SQR1_SQ1" position in register */
-#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS  (12UL) /* Value equivalent to bitfield "ADC_SQR1_SQ2" position in register */
-#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS  (18UL) /* Value equivalent to bitfield "ADC_SQR1_SQ3" position in register */
-#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS  (24UL) /* Value equivalent to bitfield "ADC_SQR1_SQ4" position in register */
-#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS  ( 0UL) /* Value equivalent to bitfield "ADC_SQR2_SQ5" position in register */
-#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS  ( 6UL) /* Value equivalent to bitfield "ADC_SQR2_SQ6" position in register */
-#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS  (12UL) /* Value equivalent to bitfield "ADC_SQR2_SQ7" position in register */
-#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS  (18UL) /* Value equivalent to bitfield "ADC_SQR2_SQ8" position in register */
-#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS  (24UL) /* Value equivalent to bitfield "ADC_SQR2_SQ9" position in register */
-#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SQR3_SQ10" position in register */
-#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_SQR3_SQ11" position in register */
-#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_SQR3_SQ12" position in register */
-#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_SQR3_SQ13" position in register */
-#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_SQR3_SQ14" position in register */
-#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SQR4_SQ15" position in register */
-#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_SQR4_SQ16" position in register */
+#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS  ( 6UL) /* Equivalent to bitfield "ADC_SQR1_SQ1" position in register */
+#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS  (12UL) /* Equivalent to bitfield "ADC_SQR1_SQ2" position in register */
+#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS  (18UL) /* Equivalent to bitfield "ADC_SQR1_SQ3" position in register */
+#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS  (24UL) /* Equivalent to bitfield "ADC_SQR1_SQ4" position in register */
+#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS  ( 0UL) /* Equivalent to bitfield "ADC_SQR2_SQ5" position in register */
+#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS  ( 6UL) /* Equivalent to bitfield "ADC_SQR2_SQ6" position in register */
+#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS  (12UL) /* Equivalent to bitfield "ADC_SQR2_SQ7" position in register */
+#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS  (18UL) /* Equivalent to bitfield "ADC_SQR2_SQ8" position in register */
+#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS  (24UL) /* Equivalent to bitfield "ADC_SQR2_SQ9" position in register */
+#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_SQR3_SQ10" position in register */
+#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS ( 6UL) /* Equivalent to bitfield "ADC_SQR3_SQ11" position in register */
+#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS (12UL) /* Equivalent to bitfield "ADC_SQR3_SQ12" position in register */
+#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS (18UL) /* Equivalent to bitfield "ADC_SQR3_SQ13" position in register */
+#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS (24UL) /* Equivalent to bitfield "ADC_SQR3_SQ14" position in register */
+#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_SQR4_SQ15" position in register */
+#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS ( 6UL) /* Equivalent to bitfield "ADC_SQR4_SQ16" position in register */
 
 
 
@@ -98,14 +98,14 @@
 #define ADC_INJ_JDRX_REGOFFSET_MASK        (ADC_JDR1_REGOFFSET | ADC_JDR2_REGOFFSET \
                                             | ADC_JDR3_REGOFFSET | ADC_JDR4_REGOFFSET)
 #define ADC_INJ_RANK_ID_JSQR_MASK          (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0)
-#define ADC_JDRX_REGOFFSET_POS             (8UL) /* Position of bits ADC_JDRx_REGOFFSET in ADC_INJ_JDRX_REGOFFSET_MASK */
+#define ADC_JDRX_REGOFFSET_POS             (8UL) /* Position of bits ADC_JDRx_REGOFFSET in ADC_INJ_JDRX_REGOFFSET_MASK*/
 
 /* Definition of ADC group injected sequencer bits information to be inserted */
 /* into ADC group injected sequencer ranks literals definition.               */
-#define ADC_INJ_RANK_1_JSQR_BITOFFSET_POS  ( 8UL) /* Value equivalent to bitfield "ADC_JSQR_JSQ1" position in register */
-#define ADC_INJ_RANK_2_JSQR_BITOFFSET_POS  (14UL) /* Value equivalent to bitfield "ADC_JSQR_JSQ2" position in register */
-#define ADC_INJ_RANK_3_JSQR_BITOFFSET_POS  (20UL) /* Value equivalent to bitfield "ADC_JSQR_JSQ3" position in register */
-#define ADC_INJ_RANK_4_JSQR_BITOFFSET_POS  (26UL) /* Value equivalent to bitfield "ADC_JSQR_JSQ4" position in register */
+#define ADC_INJ_RANK_1_JSQR_BITOFFSET_POS  ( 8UL) /* Equivalent to bitfield "ADC_JSQR_JSQ1" position in register */
+#define ADC_INJ_RANK_2_JSQR_BITOFFSET_POS  (14UL) /* Equivalent to bitfield "ADC_JSQR_JSQ2" position in register */
+#define ADC_INJ_RANK_3_JSQR_BITOFFSET_POS  (20UL) /* Equivalent to bitfield "ADC_JSQR_JSQ3" position in register */
+#define ADC_INJ_RANK_4_JSQR_BITOFFSET_POS  (26UL) /* Equivalent to bitfield "ADC_JSQR_JSQ4" position in register */
 
 
 
@@ -113,27 +113,29 @@
 /* To select into literal LL_ADC_REG_TRIG_x the relevant bits for:            */
 /* - regular trigger source                                                   */
 /* - regular trigger edge                                                     */
-#define ADC_REG_TRIG_EXT_EDGE_DEFAULT       (ADC_CFGR_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */
+#define ADC_REG_TRIG_EXT_EDGE_DEFAULT      (ADC_CFGR_EXTEN_0) /* Trigger edge set to rising edge (default setting for
+                                                                 compatibility with some ADC on other STM32 series
+                                                                 having this setting set by HW default value) */
 
 /* Mask containing trigger source masks for each of possible                  */
 /* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
 /* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
-#define ADC_REG_TRIG_SOURCE_MASK            (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTSEL) << (4U * 0UL)) | \
-                                             ((ADC_CFGR_EXTSEL)                            << (4U * 1UL)) | \
-                                             ((ADC_CFGR_EXTSEL)                            << (4U * 2UL)) | \
-                                             ((ADC_CFGR_EXTSEL)                            << (4U * 3UL))  )
+#define ADC_REG_TRIG_SOURCE_MASK           (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTSEL) << (4U * 0UL)) | \
+                                            ((ADC_CFGR_EXTSEL)                            << (4U * 1UL)) | \
+                                            ((ADC_CFGR_EXTSEL)                            << (4U * 2UL)) | \
+                                            ((ADC_CFGR_EXTSEL)                            << (4U * 3UL))  )
 
 /* Mask containing trigger edge masks for each of possible                    */
 /* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
 /* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
-#define ADC_REG_TRIG_EDGE_MASK              (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTEN) << (4U * 0UL)) | \
-                                             ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)             << (4U * 1UL)) | \
-                                             ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)             << (4U * 2UL)) | \
-                                             ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)             << (4U * 3UL))  )
+#define ADC_REG_TRIG_EDGE_MASK             (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTEN) << (4U * 0UL)) | \
+                                            ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)             << (4U * 1UL)) | \
+                                            ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)             << (4U * 2UL)) | \
+                                            ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)             << (4U * 3UL))  )
 
 /* Definition of ADC group regular trigger bits information.                  */
-#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS  ( 6UL) /* Value equivalent to bitfield "ADC_CFGR_EXTSEL" position in register */
-#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS   (10UL) /* Value equivalent to bitfield "ADC_CFGR_EXTEN" position in register */
+#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS  ( 6UL) /* Equivalent to bitfield "ADC_CFGR_EXTSEL" position in register */
+#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS   (10UL) /* Equivalent to bitfield "ADC_CFGR_EXTEN" position in register */
 
 
 
@@ -141,27 +143,29 @@
 /* To select into literal LL_ADC_INJ_TRIG_x the relevant bits for:            */
 /* - injected trigger source                                                  */
 /* - injected trigger edge                                                    */
-#define ADC_INJ_TRIG_EXT_EDGE_DEFAULT      (ADC_JSQR_JEXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */
+#define ADC_INJ_TRIG_EXT_EDGE_DEFAULT      (ADC_JSQR_JEXTEN_0) /* Trigger edge set to rising edge (default setting for
+                                                                  compatibility with some ADC on other STM32 series
+                                                                  having this setting set by HW default value) */
 
 /* Mask containing trigger source masks for each of possible                  */
 /* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
 /* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
-#define ADC_INJ_TRIG_SOURCE_MASK            (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTSEL)  << (4U * 0UL)) | \
-                                             ((ADC_JSQR_JEXTSEL)                             << (4U * 1UL)) | \
-                                             ((ADC_JSQR_JEXTSEL)                             << (4U * 2UL)) | \
-                                             ((ADC_JSQR_JEXTSEL)                             << (4U * 3UL))  )
+#define ADC_INJ_TRIG_SOURCE_MASK           (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTSEL)  << (4U * 0UL)) | \
+                                            ((ADC_JSQR_JEXTSEL)                             << (4U * 1UL)) | \
+                                            ((ADC_JSQR_JEXTSEL)                             << (4U * 2UL)) | \
+                                            ((ADC_JSQR_JEXTSEL)                             << (4U * 3UL))  )
 
 /* Mask containing trigger edge masks for each of possible                    */
 /* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
 /* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
-#define ADC_INJ_TRIG_EDGE_MASK              (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTEN) << (4U * 0UL)) | \
-                                             ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)              << (4U * 1UL)) | \
-                                             ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)              << (4U * 2UL)) | \
-                                             ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)              << (4U * 3UL))  )
+#define ADC_INJ_TRIG_EDGE_MASK             (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTEN) << (4U * 0UL)) | \
+                                            ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)              << (4U * 1UL)) | \
+                                            ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)              << (4U * 2UL)) | \
+                                            ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)              << (4U * 3UL))  )
 
 /* Definition of ADC group injected trigger bits information.                 */
-#define ADC_INJ_TRIG_EXTSEL_BITOFFSET_POS  ( 2UL) /* Value equivalent to bitfield "ADC_JSQR_JEXTSEL" position in register */
-#define ADC_INJ_TRIG_EXTEN_BITOFFSET_POS   ( 6UL) /* Value equivalent to bitfield "ADC_JSQR_JEXTEN" position in register */
+#define ADC_INJ_TRIG_EXTSEL_BITOFFSET_POS  ( 2UL) /* Equivalent to bitfield "ADC_JSQR_JEXTSEL" position in register */
+#define ADC_INJ_TRIG_EXTEN_BITOFFSET_POS   ( 6UL) /* Equivalent to bitfield "ADC_JSQR_JEXTEN" position in register */
 
 
 
@@ -178,15 +182,19 @@
 /*   and SMPx bits positions into SMPRx register                              */
 #define ADC_CHANNEL_ID_NUMBER_MASK         (ADC_CFGR_AWD1CH)
 #define ADC_CHANNEL_ID_BITFIELD_MASK       (ADC_AWD2CR_AWD2CH)
-#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Value equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */
+#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)              /* Equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK"
+                                                                   position in register                               */
 #define ADC_CHANNEL_ID_MASK                (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK \
                                             | ADC_CHANNEL_ID_INTERNAL_CH_MASK)
 /* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */
-#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (ADC_SQR2_SQ5) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */
+#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (ADC_SQR2_SQ5) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK
+  >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */
 
 /* Channel differentiation between external and internal channels */
 #define ADC_CHANNEL_ID_INTERNAL_CH         (0x80000000UL) /* Marker of internal channel */
-#define ADC_CHANNEL_ID_INTERNAL_CH_2       (0x00080000UL) /* Marker of internal channel for other ADC instances, in case of different ADC internal channels mapped on same channel number on different ADC instances */
+#define ADC_CHANNEL_ID_INTERNAL_CH_2       (0x00080000UL) /* Marker of internal channel for other ADC instances, in case
+                                                             of different ADC internal channels mapped on same channel
+                                                             number on different ADC instances */
 #define ADC_CHANNEL_ID_INTERNAL_CH_MASK    (ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2)
 
 /* Internal register offset for ADC channel sampling time configuration */
@@ -194,10 +202,12 @@
 #define ADC_SMPR1_REGOFFSET                (0x00000000UL)
 #define ADC_SMPR2_REGOFFSET                (0x02000000UL)
 #define ADC_CHANNEL_SMPRX_REGOFFSET_MASK   (ADC_SMPR1_REGOFFSET | ADC_SMPR2_REGOFFSET)
-#define ADC_SMPRX_REGOFFSET_POS            (25UL) /* Position of bits ADC_SMPRx_REGOFFSET in ADC_CHANNEL_SMPRX_REGOFFSET_MASK */
+#define ADC_SMPRX_REGOFFSET_POS            (25UL)           /* Position of bits ADC_SMPRx_REGOFFSET
+                                                               in ADC_CHANNEL_SMPRX_REGOFFSET_MASK */
 
 #define ADC_CHANNEL_SMPx_BITOFFSET_MASK    (0x01F00000UL)
-#define ADC_CHANNEL_SMPx_BITOFFSET_POS     (20UL)           /* Value equivalent to bitfield "ADC_CHANNEL_SMPx_BITOFFSET_MASK" position in register */
+#define ADC_CHANNEL_SMPx_BITOFFSET_POS     (20UL)           /* Equivalent to bitfield "ADC_CHANNEL_SMPx_BITOFFSET_MASK"
+                                                               position in register */
 
 /* Definition of channels ID number information to be inserted into           */
 /* channels literals definition.                                              */
@@ -246,25 +256,27 @@
 
 /* Definition of channels sampling time information to be inserted into       */
 /* channels literals definition.                                              */
-#define ADC_CHANNEL_0_SMP                  (ADC_SMPR1_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP0" position in register */
-#define ADC_CHANNEL_1_SMP                  (ADC_SMPR1_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP1" position in register */
-#define ADC_CHANNEL_2_SMP                  (ADC_SMPR1_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP2" position in register */
-#define ADC_CHANNEL_3_SMP                  (ADC_SMPR1_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP3" position in register */
-#define ADC_CHANNEL_4_SMP                  (ADC_SMPR1_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP4" position in register */
-#define ADC_CHANNEL_5_SMP                  (ADC_SMPR1_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP5" position in register */
-#define ADC_CHANNEL_6_SMP                  (ADC_SMPR1_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP6" position in register */
-#define ADC_CHANNEL_7_SMP                  (ADC_SMPR1_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP7" position in register */
-#define ADC_CHANNEL_8_SMP                  (ADC_SMPR1_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP8" position in register */
-#define ADC_CHANNEL_9_SMP                  (ADC_SMPR1_REGOFFSET | ((27UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR1_SMP9" position in register */
-#define ADC_CHANNEL_10_SMP                 (ADC_SMPR2_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP10" position in register */
-#define ADC_CHANNEL_11_SMP                 (ADC_SMPR2_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP11" position in register */
-#define ADC_CHANNEL_12_SMP                 (ADC_SMPR2_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP12" position in register */
-#define ADC_CHANNEL_13_SMP                 (ADC_SMPR2_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP13" position in register */
-#define ADC_CHANNEL_14_SMP                 (ADC_SMPR2_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP14" position in register */
-#define ADC_CHANNEL_15_SMP                 (ADC_SMPR2_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP15" position in register */
-#define ADC_CHANNEL_16_SMP                 (ADC_SMPR2_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP16" position in register */
-#define ADC_CHANNEL_17_SMP                 (ADC_SMPR2_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP17" position in register */
-#define ADC_CHANNEL_18_SMP                 (ADC_SMPR2_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP18" position in register */
+/* Value shifted are equivalent to bitfield "ADC_SMPRx_SMPy" position         */
+/* in register.                                                               */
+#define ADC_CHANNEL_0_SMP                  (ADC_SMPR1_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_1_SMP                  (ADC_SMPR1_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_2_SMP                  (ADC_SMPR1_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_3_SMP                  (ADC_SMPR1_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_4_SMP                  (ADC_SMPR1_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_5_SMP                  (ADC_SMPR1_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_6_SMP                  (ADC_SMPR1_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_7_SMP                  (ADC_SMPR1_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_8_SMP                  (ADC_SMPR1_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_9_SMP                  (ADC_SMPR1_REGOFFSET | ((27UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_10_SMP                 (ADC_SMPR2_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_11_SMP                 (ADC_SMPR2_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_12_SMP                 (ADC_SMPR2_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_13_SMP                 (ADC_SMPR2_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_14_SMP                 (ADC_SMPR2_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_15_SMP                 (ADC_SMPR2_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_16_SMP                 (ADC_SMPR2_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_17_SMP                 (ADC_SMPR2_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
+#define ADC_CHANNEL_18_SMP                 (ADC_SMPR2_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS))
 
 
 /* Internal mask for ADC mode single or differential ended:                   */
@@ -276,15 +288,20 @@
 #define ADC_SINGLEDIFF_CALIB_START_MASK    (ADC_CR_ADCALDIF)
 #define ADC_SINGLEDIFF_CALIB_FACTOR_MASK   (ADC_CALFACT_CALFACT_D | ADC_CALFACT_CALFACT_S)
 #define ADC_SINGLEDIFF_CHANNEL_MASK        (ADC_CHANNEL_ID_BITFIELD_MASK) /* Equivalent to ADC_DIFSEL_DIFSEL */
-#define ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK  (ADC_CALFACT_CALFACT_S_4 | ADC_CALFACT_CALFACT_S_3) /* Bits chosen to perform of shift when single mode is selected, shift value out of channels bits range. */
-#define ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK   (0x00010000UL)                           /* Selection of 1 bit to discriminate differential mode: mask of bit */
-#define ADC_SINGLEDIFF_CALIB_F_BIT_D_POS    (16UL)                                   /* Selection of 1 bit to discriminate differential mode: position of bit */
-#define ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4 (ADC_SINGLEDIFF_CALIB_F_BIT_D_POS - 4UL) /* Shift of bit ADC_SINGLEDIFF_CALIB_F_BIT_D to position to perform a shift of 4 ranks */
+#define ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK  (ADC_CALFACT_CALFACT_S_4 | ADC_CALFACT_CALFACT_S_3) /* Bits chosen
+                                           to perform of shift when single mode is selected, shift value out of
+                                           channels bits range. */
+#define ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK   (0x00010000UL) /* Selection of 1 bit to discriminate differential mode:
+                                           mask of bit */
+#define ADC_SINGLEDIFF_CALIB_F_BIT_D_POS    (16UL)         /* Selection of 1 bit to discriminate differential mode:
+                                           position of bit */
+#define ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4 (ADC_SINGLEDIFF_CALIB_F_BIT_D_POS - 4UL) /* Shift of bit
+                                           ADC_SINGLEDIFF_CALIB_F_BIT_D to perform a shift of 4 ranks */
 
 /* Internal mask for ADC analog watchdog:                                     */
 /* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for:     */
 /* (concatenation of multiple bits used in different analog watchdogs,        */
-/* (feature of several watchdogs not available on all STM32 families)).       */
+/* (feature of several watchdogs not available on all STM32 series)).         */
 /* - analog watchdog 1: monitored channel defined by number,                  */
 /*   selection of ADC group (ADC groups regular and-or injected).             */
 /* - analog watchdog 2 and 3: monitored channel defined by bitfield, no       */
@@ -306,20 +323,25 @@
 #define ADC_AWD_CR23_CHANNEL_MASK          (ADC_AWD2CR_AWD2CH)
 #define ADC_AWD_CR_ALL_CHANNEL_MASK        (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK)
 
-#define ADC_AWD_CRX_REGOFFSET_POS          (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET in ADC_AWD_CRX_REGOFFSET_MASK */
+#define ADC_AWD_CRX_REGOFFSET_POS          (20UL)                      /* Position of bits ADC_AWD_CRx_REGOFFSET
+                                                                          in ADC_AWD_CRX_REGOFFSET_MASK */
 
 /* Internal register offset for ADC analog watchdog threshold configuration */
 #define ADC_AWD_TR1_REGOFFSET              (ADC_AWD_CR1_REGOFFSET)
 #define ADC_AWD_TR2_REGOFFSET              (ADC_AWD_CR2_REGOFFSET)
 #define ADC_AWD_TR3_REGOFFSET              (ADC_AWD_CR3_REGOFFSET)
 #define ADC_AWD_TRX_REGOFFSET_MASK         (ADC_AWD_TR1_REGOFFSET | ADC_AWD_TR2_REGOFFSET | ADC_AWD_TR3_REGOFFSET)
-#define ADC_AWD_TRX_REGOFFSET_POS          (ADC_AWD_CRX_REGOFFSET_POS)     /* Position of bits ADC_SQRx_REGOFFSET in ADC_AWD_TRX_REGOFFSET_MASK */
-#define ADC_AWD_TRX_BIT_HIGH_MASK          (0x00010000UL)                   /* Selection of 1 bit to discriminate threshold high: mask of bit */
-#define ADC_AWD_TRX_BIT_HIGH_POS           (16UL)                           /* Selection of 1 bit to discriminate threshold high: position of bit */
-#define ADC_AWD_TRX_BIT_HIGH_SHIFT4        (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to position to perform a shift of 4 ranks */
+#define ADC_AWD_TRX_REGOFFSET_POS          (ADC_AWD_CRX_REGOFFSET_POS)      /* Position of bits ADC_SQRx_REGOFFSET
+                                                                               in ADC_AWD_TRX_REGOFFSET_MASK */
+#define ADC_AWD_TRX_BIT_HIGH_MASK          (0x00010000UL)                   /* Selection of 1 bit to discriminate
+                                                                               threshold high: mask of bit */
+#define ADC_AWD_TRX_BIT_HIGH_POS           (16UL)                           /* Selection of 1 bit to discriminate
+                                                                               threshold high: position of bit */
+#define ADC_AWD_TRX_BIT_HIGH_SHIFT4        (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to
+                                                                               position to perform a shift of 4 ranks */
 
 /* Internal mask for ADC offset:                                              */
-/* Internal register offset for ADC offset number configuration */
+/* Internal register offset for ADC offset instance configuration */
 #define ADC_OFR1_REGOFFSET                 (0x00000000UL)
 #define ADC_OFR2_REGOFFSET                 (0x00000001UL)
 #define ADC_OFR3_REGOFFSET                 (0x00000002UL)
@@ -329,31 +351,51 @@
 
 
 /* ADC registers bits positions */
-#define ADC_CFGR_RES_BITOFFSET_POS         ( 3UL) /* Value equivalent to bitfield "ADC_CFGR_RES" position in register */
-#define ADC_CFGR_AWD1SGL_BITOFFSET_POS     (22UL) /* Value equivalent to bitfield "ADC_CFGR_AWD1SGL" position in register */
-#define ADC_CFGR_AWD1EN_BITOFFSET_POS      (23UL) /* Value equivalent to bitfield "ADC_CFGR_AWD1EN" position in register */
-#define ADC_CFGR_JAWD1EN_BITOFFSET_POS     (24UL) /* Value equivalent to bitfield "ADC_CFGR_JAWD1EN" position in register */
-#define ADC_TR1_HT1_BITOFFSET_POS          (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */
+#define ADC_CFGR_RES_BITOFFSET_POS         ( 3UL) /* Equivalent to bitfield "ADC_CFGR_RES" position in register */
+#define ADC_CFGR_AWD1SGL_BITOFFSET_POS     (22UL) /* Equivalent to bitfield "ADC_CFGR_AWD1SGL" position in register */
+#define ADC_CFGR_AWD1EN_BITOFFSET_POS      (23UL) /* Equivalent to bitfield "ADC_CFGR_AWD1EN" position in register */
+#define ADC_CFGR_JAWD1EN_BITOFFSET_POS     (24UL) /* Equivalent to bitfield "ADC_CFGR_JAWD1EN" position in register */
+#define ADC_TR1_HT1_BITOFFSET_POS          (16UL) /* Equivalent to bitfield "ADC_TR1_HT1" position in register */
 
 
 /* ADC registers bits groups */
-#define ADC_CR_BITS_PROPERTY_RS            (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */
+#define ADC_CR_BITS_PROPERTY_RS            (ADC_CR_ADCAL | ADC_CR_ADEN | ADC_CR_ADDIS \
+                                            | ADC_CR_JADSTART | ADC_CR_JADSTP \
+                                            | ADC_CR_ADSTART | ADC_CR_ADSTP)            /* ADC register CR bits with
+                                           HW property "rs": Software can read as well as set this bit.
+                                           Writing '0' has no effect on the bit value. */
 
 
 /* ADC internal channels related definitions */
 /* Internal voltage reference VrefInt */
-#define VREFINT_CAL_ADDR                   ((uint16_t*) (0x1FFF75AAUL)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
-#define VREFINT_CAL_VREF                   ( 3000UL)                    /* Analog voltage reference (Vref+) value with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */
+#define VREFINT_CAL_ADDR                   ((uint16_t*) (0x1FFF75AAUL)) /* Internal voltage reference, address of
+                                           parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC
+                                           (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
+#define VREFINT_CAL_VREF                   ( 3000UL)                    /* Analog voltage reference (Vref+) value
+                                           with which VrefInt has been calibrated in production
+                                           (tolerance: +-10 mV) (unit: mV). */
 /* Temperature sensor */
-#define TEMPSENSOR_CAL1_ADDR               ((uint16_t*) (0x1FFF75A8UL)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32L4, temperature sensor ADC raw data acquired at temperature  30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
-#define TEMPSENSOR_CAL2_ADDR               ((uint16_t*) (0x1FFF75CAUL)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32L4, temperature sensor ADC raw data acquired at temperature defined by TEMPSENSOR_CAL2_TEMP (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
-#define TEMPSENSOR_CAL1_TEMP               (( int32_t)   30L)           /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL1_ADDR               ((uint16_t*) (0x1FFF75A8UL)) /* Address of parameter TS_CAL1: On STM32L4,
+                                           temperature sensor ADC raw data acquired at temperature  30 DegC
+                                           (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
+#define TEMPSENSOR_CAL2_ADDR               ((uint16_t*) (0x1FFF75CAUL)) /* Address of parameter TS_CAL2: On STM32L4,
+                                           temperature sensor ADC raw data acquired at temperature defined by
+                                           TEMPSENSOR_CAL2_TEMP (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
+#define TEMPSENSOR_CAL1_TEMP               (( int32_t)   30L)           /* Temperature at which temperature sensor
+                                           has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR
+                                           (tolerance: +-5 DegC) (unit: DegC). */
 #if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
-#define TEMPSENSOR_CAL2_TEMP               (110L)                       /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL2_TEMP               (110L)                       /* Temperature at which temperature sensor
+                                           has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR
+                                           (tolerance: +-5 DegC) (unit: DegC). */
 #else
-#define TEMPSENSOR_CAL2_TEMP               (130L)                       /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL2_TEMP               (130L)                       /* Temperature at which temperature sensor
+                                           has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR
+                                           (tolerance: +-5 DegC) (unit: DegC). */
 #endif /* defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
-#define TEMPSENSOR_CAL_VREFANALOG          (3000UL)                     /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (+-10 mV) (unit: mV). */
+#define TEMPSENSOR_CAL_VREFANALOG          (3000UL)                     /* Analog voltage reference (Vref+) value
+                                           with which temperature sensor has been calibrated in production
+                                           (tolerance +-10 mV) (unit: mV). */
 
 /**
   * @}
@@ -401,27 +443,28 @@
 {
   uint32_t CommonClock;                 /*!< Set parameter common to several ADC: Clock source and prescaler.
                                              This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE
-                                             @note On this STM32 series, if ADC group injected is used, some
-                                                   clock ratio constraints between ADC clock and AHB clock
-                                                   must be respected. Refer to reference manual.
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */
+                                             @note On this STM32 series, if ADC group injected is used, some clock ratio
+                                                   constraints between ADC clock and AHB clock must be respected.
+                                                   Refer to reference manual.
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetCommonClock(). */
 
 #if defined(ADC_MULTIMODE_SUPPORT)
-  uint32_t Multimode;                   /*!< Set ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances).
+  uint32_t Multimode;                   /*!< Set ADC multimode configuration to operate in independent mode or multimode
+                                             (for devices with several ADC instances).
                                              This parameter can be a value of @ref ADC_LL_EC_MULTI_MODE
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultimode(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetMultimode(). */
 
   uint32_t MultiDMATransfer;            /*!< Set ADC multimode conversion data transfer: no transfer or transfer by DMA.
                                              This parameter can be a value of @ref ADC_LL_EC_MULTI_DMA_TRANSFER
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultiDMATransfer(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetMultiDMATransfer(). */
 
   uint32_t MultiTwoSamplingDelay;       /*!< Set ADC multimode delay between 2 sampling phases.
                                              This parameter can be a value of @ref ADC_LL_EC_MULTI_TWOSMP_DELAY
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultiTwoSamplingDelay(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetMultiTwoSamplingDelay(). */
 #endif /* ADC_MULTIMODE_SUPPORT */
 
 } LL_ADC_CommonInitTypeDef;
@@ -430,14 +473,14 @@
   * @brief  Structure definition of some features of ADC instance.
   * @note   These parameters have an impact on ADC scope: ADC instance.
   *         Affects both group regular and group injected (availability
-  *         of ADC group injected depends on STM32 families).
+  *         of ADC group injected depends on STM32 series).
   *         Refer to corresponding unitary functions into
   *         @ref ADC_LL_EF_Configuration_ADC_Instance .
   * @note   The setting of these parameters by function @ref LL_ADC_Init()
   *         is conditioned to ADC state:
   *         ADC instance must be disabled.
   *         This condition is applied to all ADC features, for efficiency
-  *         and compatibility over all STM32 families. However, the different
+  *         and compatibility over all STM32 series. However, the different
   *         features can be set under different ADC state conditions
   *         (setting possible with ADC enabled without conversion on going,
   *         ADC enabled with conversion on going, ...)
@@ -450,18 +493,18 @@
 {
   uint32_t Resolution;                  /*!< Set ADC resolution.
                                              This parameter can be a value of @ref ADC_LL_EC_RESOLUTION
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetResolution(). */
 
   uint32_t DataAlignment;               /*!< Set ADC conversion data alignment.
                                              This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetDataAlignment(). */
 
   uint32_t LowPowerMode;                /*!< Set ADC low power mode.
                                              This parameter can be a value of @ref ADC_LL_EC_LP_MODE
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetLowPowerMode(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_SetLowPowerMode(). */
 
 } LL_ADC_InitTypeDef;
 
@@ -475,7 +518,7 @@
   *         is conditioned to ADC state:
   *         ADC instance must be disabled.
   *         This condition is applied to all ADC features, for efficiency
-  *         and compatibility over all STM32 families. However, the different
+  *         and compatibility over all STM32 series. However, the different
   *         features can be set under different ADC state conditions
   *         (setting possible with ADC enabled without conversion on going,
   *         ADC enabled with conversion on going, ...)
@@ -486,42 +529,52 @@
   */
 typedef struct
 {
-  uint32_t TriggerSource;               /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external peripheral (timer event, external interrupt line).
+  uint32_t TriggerSource;               /*!< Set ADC group regular conversion trigger source: internal (SW start) or
+                                             from external peripheral (timer event, external interrupt line).
                                              This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE
-                                             @note On this STM32 series, setting trigger source to external trigger also set trigger polarity to rising edge
-                                                   (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value).
-                                                   In case of need to modify trigger edge, use function @ref LL_ADC_REG_SetTriggerEdge().
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */
+                                             @note On this STM32 series, setting trigger source to external trigger also
+                                                   set trigger polarity to rising edge(default setting for compatibility
+                                                   with some ADC on other STM32 series having this setting set by HW
+                                                   default value).
+                                                   In case of need to modify trigger edge, use function
+                                                   @ref LL_ADC_REG_SetTriggerEdge().
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_REG_SetTriggerSource(). */
 
   uint32_t SequencerLength;             /*!< Set ADC group regular sequencer length.
                                              This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_REG_SetSequencerLength(). */
 
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerLength(). */
-
-  uint32_t SequencerDiscont;            /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks.
+  uint32_t SequencerDiscont;            /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided
+                                             and scan conversions interrupted every selected number of ranks.
                                              This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE
-                                             @note This parameter has an effect only if group regular sequencer is enabled
-                                                   (scan length of 2 ranks or more).
+                                             @note This parameter has an effect only if group regular sequencer is
+                                                    enabled (scan length of 2 ranks or more).
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_REG_SetSequencerDiscont(). */
 
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */
-
-  uint32_t ContinuousMode;              /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically).
+  uint32_t ContinuousMode;              /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC
+                                             conversions are performed in single mode (one conversion per trigger) or in
+                                             continuous mode (after the first trigger, following conversions launched
+                                             successively automatically).
                                              This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE
-                                             Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode.
+                                             Note: It is not possible to enable both ADC group regular continuous mode
+                                                   and discontinuous mode.
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_REG_SetContinuousMode(). */
 
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */
-
-  uint32_t DMATransfer;                 /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode.
+  uint32_t DMATransfer;                 /*!< Set ADC group regular conversion data transfer: no transfer or transfer
+                                             by DMA, and DMA requests mode.
                                              This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_REG_SetDMATransfer(). */
 
   uint32_t Overrun;                     /*!< Set ADC group regular behavior in case of overrun:
                                              data preserved or overwritten.
                                              This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetOverrun(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_REG_SetOverrun(). */
 
 } LL_ADC_REG_InitTypeDef;
 
@@ -535,7 +588,7 @@
   *         is conditioned to ADC state:
   *         ADC instance must be disabled.
   *         This condition is applied to all ADC features, for efficiency
-  *         and compatibility over all STM32 families. However, the different
+  *         and compatibility over all STM32 series. However, the different
   *         features can be set under different ADC state conditions
   *         (setting possible with ADC enabled without conversion on going,
   *         ADC enabled with conversion on going, ...)
@@ -546,31 +599,38 @@
   */
 typedef struct
 {
-  uint32_t TriggerSource;               /*!< Set ADC group injected conversion trigger source: internal (SW start) or from external peripheral (timer event, external interrupt line).
+  uint32_t TriggerSource;               /*!< Set ADC group injected conversion trigger source: internal (SW start)
+                                             or from external peripheral (timer event, external interrupt line).
                                              This parameter can be a value of @ref ADC_LL_EC_INJ_TRIGGER_SOURCE
-                                             @note On this STM32 series, setting trigger source to external trigger also set trigger polarity to rising edge
-                                                   (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value).
-                                                   In case of need to modify trigger edge, use function @ref LL_ADC_INJ_SetTriggerEdge().
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTriggerSource(). */
+                                             @note On this STM32 series, setting trigger source to external trigger also
+                                                   set trigger polarity to rising edge (default setting for
+                                                   compatibility with some ADC on other STM32 series having this
+                                                   setting set by HW default value).
+                                                   In case of need to modify trigger edge, use function
+                                                   @ref LL_ADC_INJ_SetTriggerEdge().
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_INJ_SetTriggerSource(). */
 
   uint32_t SequencerLength;             /*!< Set ADC group injected sequencer length.
                                              This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_SCAN_LENGTH
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_INJ_SetSequencerLength(). */
 
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetSequencerLength(). */
-
-  uint32_t SequencerDiscont;            /*!< Set ADC group injected sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks.
+  uint32_t SequencerDiscont;            /*!< Set ADC group injected sequencer discontinuous mode: sequence subdivided
+                                             and scan conversions interrupted every selected number of ranks.
                                              This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_DISCONT_MODE
-                                             @note This parameter has an effect only if group injected sequencer is enabled
-                                                   (scan length of 2 ranks or more).
+                                             @note This parameter has an effect only if group injected sequencer is
+                                                   enabled (scan length of 2 ranks or more).
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_INJ_SetSequencerDiscont(). */
 
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetSequencerDiscont(). */
-
-  uint32_t TrigAuto;                    /*!< Set ADC group injected conversion trigger: independent or from ADC group regular.
+  uint32_t TrigAuto;                    /*!< Set ADC group injected conversion trigger: independent or from ADC group
+                                             regular.
                                              This parameter can be a value of @ref ADC_LL_EC_INJ_TRIG_AUTO
-                                             Note: This parameter must be set to set to independent trigger if injected trigger source is set to an external trigger.
-
-                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTrigAuto(). */
+                                             Note: This parameter must be set to set to independent trigger if injected
+                                                   trigger source is set to an external trigger.
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_ADC_INJ_SetTrigAuto(). */
 
 } LL_ADC_INJ_InitTypeDef;
 
@@ -589,39 +649,64 @@
   * @{
   */
 #define LL_ADC_FLAG_ADRDY                  ADC_ISR_ADRDY      /*!< ADC flag ADC instance ready */
-#define LL_ADC_FLAG_EOC                    ADC_ISR_EOC        /*!< ADC flag ADC group regular end of unitary conversion */
-#define LL_ADC_FLAG_EOS                    ADC_ISR_EOS        /*!< ADC flag ADC group regular end of sequence conversions */
+#define LL_ADC_FLAG_EOC                    ADC_ISR_EOC        /*!< ADC flag ADC group regular end of unitary
+                                           conversion */
+#define LL_ADC_FLAG_EOS                    ADC_ISR_EOS        /*!< ADC flag ADC group regular end of sequence
+                                           conversions */
 #define LL_ADC_FLAG_OVR                    ADC_ISR_OVR        /*!< ADC flag ADC group regular overrun */
 #define LL_ADC_FLAG_EOSMP                  ADC_ISR_EOSMP      /*!< ADC flag ADC group regular end of sampling phase */
-#define LL_ADC_FLAG_JEOC                   ADC_ISR_JEOC       /*!< ADC flag ADC group injected end of unitary conversion */
-#define LL_ADC_FLAG_JEOS                   ADC_ISR_JEOS       /*!< ADC flag ADC group injected end of sequence conversions */
-#define LL_ADC_FLAG_JQOVF                  ADC_ISR_JQOVF      /*!< ADC flag ADC group injected contexts queue overflow */
+#define LL_ADC_FLAG_JEOC                   ADC_ISR_JEOC       /*!< ADC flag ADC group injected end of unitary
+                                                                   conversion */
+#define LL_ADC_FLAG_JEOS                   ADC_ISR_JEOS       /*!< ADC flag ADC group injected end of sequence
+                                                                   conversions */
+#define LL_ADC_FLAG_JQOVF                  ADC_ISR_JQOVF      /*!< ADC flag ADC group injected contexts queue
+                                                                   overflow */
 #define LL_ADC_FLAG_AWD1                   ADC_ISR_AWD1       /*!< ADC flag ADC analog watchdog 1 */
 #define LL_ADC_FLAG_AWD2                   ADC_ISR_AWD2       /*!< ADC flag ADC analog watchdog 2 */
 #define LL_ADC_FLAG_AWD3                   ADC_ISR_AWD3       /*!< ADC flag ADC analog watchdog 3 */
 #if defined(ADC_MULTIMODE_SUPPORT)
 #define LL_ADC_FLAG_ADRDY_MST              ADC_CSR_ADRDY_MST  /*!< ADC flag ADC multimode master instance ready */
 #define LL_ADC_FLAG_ADRDY_SLV              ADC_CSR_ADRDY_SLV  /*!< ADC flag ADC multimode slave instance ready */
-#define LL_ADC_FLAG_EOC_MST                ADC_CSR_EOC_MST    /*!< ADC flag ADC multimode master group regular end of unitary conversion */
-#define LL_ADC_FLAG_EOC_SLV                ADC_CSR_EOC_SLV    /*!< ADC flag ADC multimode slave group regular end of unitary conversion */
-#define LL_ADC_FLAG_EOS_MST                ADC_CSR_EOS_MST    /*!< ADC flag ADC multimode master group regular end of sequence conversions */
-#define LL_ADC_FLAG_EOS_SLV                ADC_CSR_EOS_SLV    /*!< ADC flag ADC multimode slave group regular end of sequence conversions */
-#define LL_ADC_FLAG_OVR_MST                ADC_CSR_OVR_MST    /*!< ADC flag ADC multimode master group regular overrun */
-#define LL_ADC_FLAG_OVR_SLV                ADC_CSR_OVR_SLV    /*!< ADC flag ADC multimode slave group regular overrun */
-#define LL_ADC_FLAG_EOSMP_MST              ADC_CSR_EOSMP_MST  /*!< ADC flag ADC multimode master group regular end of sampling phase */
-#define LL_ADC_FLAG_EOSMP_SLV              ADC_CSR_EOSMP_SLV  /*!< ADC flag ADC multimode slave group regular end of sampling phase */
-#define LL_ADC_FLAG_JEOC_MST               ADC_CSR_JEOC_MST   /*!< ADC flag ADC multimode master group injected end of unitary conversion */
-#define LL_ADC_FLAG_JEOC_SLV               ADC_CSR_JEOC_SLV   /*!< ADC flag ADC multimode slave group injected end of unitary conversion */
-#define LL_ADC_FLAG_JEOS_MST               ADC_CSR_JEOS_MST   /*!< ADC flag ADC multimode master group injected end of sequence conversions */
-#define LL_ADC_FLAG_JEOS_SLV               ADC_CSR_JEOS_SLV   /*!< ADC flag ADC multimode slave group injected end of sequence conversions */
-#define LL_ADC_FLAG_JQOVF_MST              ADC_CSR_JQOVF_MST  /*!< ADC flag ADC multimode master group injected contexts queue overflow */
-#define LL_ADC_FLAG_JQOVF_SLV              ADC_CSR_JQOVF_SLV  /*!< ADC flag ADC multimode slave group injected contexts queue overflow */
-#define LL_ADC_FLAG_AWD1_MST               ADC_CSR_AWD1_MST   /*!< ADC flag ADC multimode master analog watchdog 1 of the ADC master */
-#define LL_ADC_FLAG_AWD1_SLV               ADC_CSR_AWD1_SLV   /*!< ADC flag ADC multimode slave analog watchdog 1 of the ADC slave */
-#define LL_ADC_FLAG_AWD2_MST               ADC_CSR_AWD2_MST   /*!< ADC flag ADC multimode master analog watchdog 2 of the ADC master */
-#define LL_ADC_FLAG_AWD2_SLV               ADC_CSR_AWD2_SLV   /*!< ADC flag ADC multimode slave analog watchdog 2 of the ADC slave */
-#define LL_ADC_FLAG_AWD3_MST               ADC_CSR_AWD3_MST   /*!< ADC flag ADC multimode master analog watchdog 3 of the ADC master */
-#define LL_ADC_FLAG_AWD3_SLV               ADC_CSR_AWD3_SLV   /*!< ADC flag ADC multimode slave analog watchdog 3 of the ADC slave */
+#define LL_ADC_FLAG_EOC_MST                ADC_CSR_EOC_MST    /*!< ADC flag ADC multimode master group regular end of
+                                                                   unitary conversion */
+#define LL_ADC_FLAG_EOC_SLV                ADC_CSR_EOC_SLV    /*!< ADC flag ADC multimode slave group regular end of
+                                                                   unitary conversion */
+#define LL_ADC_FLAG_EOS_MST                ADC_CSR_EOS_MST    /*!< ADC flag ADC multimode master group regular end of
+                                                                   sequence conversions */
+#define LL_ADC_FLAG_EOS_SLV                ADC_CSR_EOS_SLV    /*!< ADC flag ADC multimode slave group regular end of
+                                                                   sequence conversions */
+#define LL_ADC_FLAG_OVR_MST                ADC_CSR_OVR_MST    /*!< ADC flag ADC multimode master group regular
+                                                                   overrun */
+#define LL_ADC_FLAG_OVR_SLV                ADC_CSR_OVR_SLV    /*!< ADC flag ADC multimode slave group regular
+                                                                   overrun */
+#define LL_ADC_FLAG_EOSMP_MST              ADC_CSR_EOSMP_MST  /*!< ADC flag ADC multimode master group regular end of
+                                                                   sampling phase */
+#define LL_ADC_FLAG_EOSMP_SLV              ADC_CSR_EOSMP_SLV  /*!< ADC flag ADC multimode slave group regular end of
+                                                                   sampling phase */
+#define LL_ADC_FLAG_JEOC_MST               ADC_CSR_JEOC_MST   /*!< ADC flag ADC multimode master group injected end of
+                                                                   unitary conversion */
+#define LL_ADC_FLAG_JEOC_SLV               ADC_CSR_JEOC_SLV   /*!< ADC flag ADC multimode slave group injected end of
+                                                                   unitary conversion */
+#define LL_ADC_FLAG_JEOS_MST               ADC_CSR_JEOS_MST   /*!< ADC flag ADC multimode master group injected end of
+                                                                   sequence conversions */
+#define LL_ADC_FLAG_JEOS_SLV               ADC_CSR_JEOS_SLV   /*!< ADC flag ADC multimode slave group injected end of
+                                                                   sequence conversions */
+#define LL_ADC_FLAG_JQOVF_MST              ADC_CSR_JQOVF_MST  /*!< ADC flag ADC multimode master group injected
+                                                                   contexts queue overflow */
+#define LL_ADC_FLAG_JQOVF_SLV              ADC_CSR_JQOVF_SLV  /*!< ADC flag ADC multimode slave group injected
+                                                                   contexts queue overflow */
+#define LL_ADC_FLAG_AWD1_MST               ADC_CSR_AWD1_MST   /*!< ADC flag ADC multimode master analog watchdog 1
+                                                                   of the ADC master */
+#define LL_ADC_FLAG_AWD1_SLV               ADC_CSR_AWD1_SLV   /*!< ADC flag ADC multimode slave analog watchdog 1
+                                                                   of the ADC slave */
+#define LL_ADC_FLAG_AWD2_MST               ADC_CSR_AWD2_MST   /*!< ADC flag ADC multimode master analog watchdog 2
+                                                                   of the ADC master */
+#define LL_ADC_FLAG_AWD2_SLV               ADC_CSR_AWD2_SLV   /*!< ADC flag ADC multimode slave analog watchdog 2
+                                                                   of the ADC slave */
+#define LL_ADC_FLAG_AWD3_MST               ADC_CSR_AWD3_MST   /*!< ADC flag ADC multimode master analog watchdog 3
+                                                                   of the ADC master */
+#define LL_ADC_FLAG_AWD3_SLV               ADC_CSR_AWD3_SLV   /*!< ADC flag ADC multimode slave analog watchdog 3
+                                                                   of the ADC slave */
 #endif /* ADC_MULTIMODE_SUPPORT */
 /**
   * @}
@@ -632,13 +717,19 @@
   * @{
   */
 #define LL_ADC_IT_ADRDY                    ADC_IER_ADRDYIE    /*!< ADC interruption ADC instance ready */
-#define LL_ADC_IT_EOC                      ADC_IER_EOCIE      /*!< ADC interruption ADC group regular end of unitary conversion */
-#define LL_ADC_IT_EOS                      ADC_IER_EOSIE      /*!< ADC interruption ADC group regular end of sequence conversions */
+#define LL_ADC_IT_EOC                      ADC_IER_EOCIE      /*!< ADC interruption ADC group regular end of unitary
+                                                                   conversion */
+#define LL_ADC_IT_EOS                      ADC_IER_EOSIE      /*!< ADC interruption ADC group regular end of sequence
+                                                                   conversions */
 #define LL_ADC_IT_OVR                      ADC_IER_OVRIE      /*!< ADC interruption ADC group regular overrun */
-#define LL_ADC_IT_EOSMP                    ADC_IER_EOSMPIE    /*!< ADC interruption ADC group regular end of sampling phase */
-#define LL_ADC_IT_JEOC                     ADC_IER_JEOCIE     /*!< ADC interruption ADC group injected end of unitary conversion */
-#define LL_ADC_IT_JEOS                     ADC_IER_JEOSIE     /*!< ADC interruption ADC group injected end of sequence conversions */
-#define LL_ADC_IT_JQOVF                    ADC_IER_JQOVFIE    /*!< ADC interruption ADC group injected contexts queue overflow */
+#define LL_ADC_IT_EOSMP                    ADC_IER_EOSMPIE    /*!< ADC interruption ADC group regular end of sampling
+                                                                   phase */
+#define LL_ADC_IT_JEOC                     ADC_IER_JEOCIE     /*!< ADC interruption ADC group injected end of unitary
+                                                                   conversion */
+#define LL_ADC_IT_JEOS                     ADC_IER_JEOSIE     /*!< ADC interruption ADC group injected end of sequence
+                                                                   conversions */
+#define LL_ADC_IT_JQOVF                    ADC_IER_JQOVFIE    /*!< ADC interruption ADC group injected contexts queue
+                                                                   overflow */
 #define LL_ADC_IT_AWD1                     ADC_IER_AWD1IE     /*!< ADC interruption ADC analog watchdog 1 */
 #define LL_ADC_IT_AWD2                     ADC_IER_AWD2IE     /*!< ADC interruption ADC analog watchdog 2 */
 #define LL_ADC_IT_AWD3                     ADC_IER_AWD3IE     /*!< ADC interruption ADC analog watchdog 3 */
@@ -652,9 +743,17 @@
 /* List of ADC registers intended to be used (most commonly) with             */
 /* DMA transfer.                                                              */
 /* Refer to function @ref LL_ADC_DMA_GetRegAddr().                            */
-#define LL_ADC_DMA_REG_REGULAR_DATA          (0x00000000UL) /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */
+#define LL_ADC_DMA_REG_REGULAR_DATA        (0x00000000UL)      /* ADC group regular conversion data register
+                                           (corresponding to register DR) to be used with ADC configured in independent
+                                           mode. Without DMA transfer, register accessed by LL function
+                                           @ref LL_ADC_REG_ReadConversionData32() and other
+                                           functions @ref LL_ADC_REG_ReadConversionDatax() */
 #if defined(ADC_MULTIMODE_SUPPORT)
-#define LL_ADC_DMA_REG_REGULAR_DATA_MULTI    (0x00000001UL) /* ADC group regular conversion data register (corresponding to register CDR) to be used with ADC configured in multimode (available on STM32 devices with several ADC instances). Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadMultiConversionData32() */
+#define LL_ADC_DMA_REG_REGULAR_DATA_MULTI  (0x00000001UL)      /* ADC group regular conversion data register
+                                           (corresponding to register CDR) to be used with ADC configured in multimode
+                                           (available on STM32 devices with several ADC instances).
+                                           Without DMA transfer, register accessed by LL function
+                                           @ref LL_ADC_REG_ReadMultiConversionData32() */
 #endif /* ADC_MULTIMODE_SUPPORT */
 /**
   * @}
@@ -663,21 +762,38 @@
 /** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE  ADC common - Clock source
   * @{
   */
-#define LL_ADC_CLOCK_SYNC_PCLK_DIV1        (ADC_CCR_CKMODE_0)                                    /*!< ADC synchronous clock derived from AHB clock without prescaler */
-#define LL_ADC_CLOCK_SYNC_PCLK_DIV2        (ADC_CCR_CKMODE_1                   )                 /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */
-#define LL_ADC_CLOCK_SYNC_PCLK_DIV4        (ADC_CCR_CKMODE_1 | ADC_CCR_CKMODE_0)                 /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */
-#define LL_ADC_CLOCK_ASYNC_DIV1            (0x00000000UL)                                        /*!< ADC asynchronous clock without prescaler */
-#define LL_ADC_CLOCK_ASYNC_DIV2            (ADC_CCR_PRESC_0)                                     /*!< ADC asynchronous clock with prescaler division by 2   */
-#define LL_ADC_CLOCK_ASYNC_DIV4            (ADC_CCR_PRESC_1                  )                   /*!< ADC asynchronous clock with prescaler division by 4   */
-#define LL_ADC_CLOCK_ASYNC_DIV6            (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0)                   /*!< ADC asynchronous clock with prescaler division by 6   */
-#define LL_ADC_CLOCK_ASYNC_DIV8            (ADC_CCR_PRESC_2                                    ) /*!< ADC asynchronous clock with prescaler division by 8   */
-#define LL_ADC_CLOCK_ASYNC_DIV10           (ADC_CCR_PRESC_2                   | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 10  */
-#define LL_ADC_CLOCK_ASYNC_DIV12           (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1                  ) /*!< ADC asynchronous clock with prescaler division by 12  */
-#define LL_ADC_CLOCK_ASYNC_DIV16           (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 16  */
-#define LL_ADC_CLOCK_ASYNC_DIV32           (ADC_CCR_PRESC_3)                                     /*!< ADC asynchronous clock with prescaler division by 32  */
-#define LL_ADC_CLOCK_ASYNC_DIV64           (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0)                   /*!< ADC asynchronous clock with prescaler division by 64  */
-#define LL_ADC_CLOCK_ASYNC_DIV128          (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1)                   /*!< ADC asynchronous clock with prescaler division by 128 */
-#define LL_ADC_CLOCK_ASYNC_DIV256          (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 256 */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV1        (ADC_CCR_CKMODE_0)                    /*!< ADC synchronous clock derived from
+                                           AHB clock without prescaler */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV2        (ADC_CCR_CKMODE_1)                    /*!< ADC synchronous clock derived from
+                                           AHB clock with prescaler division by 2 */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV4        (ADC_CCR_CKMODE_1 | ADC_CCR_CKMODE_0) /*!< ADC synchronous clock derived from
+                                           AHB clock with prescaler division by 4 */
+#define LL_ADC_CLOCK_ASYNC_DIV1            (0x00000000UL)                      /*!< ADC asynchronous clock without
+                                           prescaler */
+#define LL_ADC_CLOCK_ASYNC_DIV2            (ADC_CCR_PRESC_0)                   /*!< ADC asynchronous clock with
+                                           prescaler division by 2 */
+#define LL_ADC_CLOCK_ASYNC_DIV4            (ADC_CCR_PRESC_1)                   /*!< ADC asynchronous clock with
+                                           prescaler division by 4 */
+#define LL_ADC_CLOCK_ASYNC_DIV6            (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with
+                                           prescaler division by 6 */
+#define LL_ADC_CLOCK_ASYNC_DIV8            (ADC_CCR_PRESC_2)                   /*!< ADC asynchronous clock with
+                                           prescaler division by 8 */
+#define LL_ADC_CLOCK_ASYNC_DIV10           (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with
+                                           prescaler division by 10 */
+#define LL_ADC_CLOCK_ASYNC_DIV12           (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with
+                                           prescaler division by 12 */
+#define LL_ADC_CLOCK_ASYNC_DIV16           (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 \
+                                            | ADC_CCR_PRESC_0)                  /*!< ADC asynchronous clock with
+                                           prescaler division by 16  */
+#define LL_ADC_CLOCK_ASYNC_DIV32           (ADC_CCR_PRESC_3)                   /*!< ADC asynchronous clock with
+                                           prescaler division by 32 */
+#define LL_ADC_CLOCK_ASYNC_DIV64           (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with
+                                           prescaler division by 64 */
+#define LL_ADC_CLOCK_ASYNC_DIV128          (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with
+                                           prescaler division by 128 */
+#define LL_ADC_CLOCK_ASYNC_DIV256          (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 \
+                                            | ADC_CCR_PRESC_0)                  /*!< ADC asynchronous clock with
+                                           prescaler division by 256 */
 /**
   * @}
   */
@@ -690,10 +806,11 @@
 /*       If they are not listed below, they do not require any specific       */
 /*       path enable. In this case, Access to measurement path is done        */
 /*       only by selecting the corresponding ADC internal channel.            */
-#define LL_ADC_PATH_INTERNAL_NONE          (0x00000000UL)         /*!< ADC measurement paths all disabled */
-#define LL_ADC_PATH_INTERNAL_VREFINT       (ADC_CCR_VREFEN)       /*!< ADC measurement path to internal channel VrefInt */
-#define LL_ADC_PATH_INTERNAL_TEMPSENSOR    (ADC_CCR_TSEN)         /*!< ADC measurement path to internal channel temperature sensor */
-#define LL_ADC_PATH_INTERNAL_VBAT          (ADC_CCR_VBATEN)       /*!< ADC measurement path to internal channel Vbat */
+#define LL_ADC_PATH_INTERNAL_NONE          (0x00000000UL)       /*!< ADC measurement paths all disabled */
+#define LL_ADC_PATH_INTERNAL_VREFINT       (ADC_CCR_VREFEN)     /*!< ADC measurement path to internal channel VrefInt */
+#define LL_ADC_PATH_INTERNAL_TEMPSENSOR    (ADC_CCR_TSEN)       /*!< ADC measurement path to internal channel
+                                                                     temperature sensor */
+#define LL_ADC_PATH_INTERNAL_VBAT          (ADC_CCR_VBATEN)     /*!< ADC measurement path to internal channel Vbat */
 /**
   * @}
   */
@@ -712,8 +829,10 @@
 /** @defgroup ADC_LL_EC_DATA_ALIGN  ADC instance - Data alignment
   * @{
   */
-#define LL_ADC_DATA_ALIGN_RIGHT            (0x00000000UL)         /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
-#define LL_ADC_DATA_ALIGN_LEFT             (ADC_CFGR_ALIGN)       /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/
+#define LL_ADC_DATA_ALIGN_RIGHT            (0x00000000UL)     /*!< ADC conversion data alignment: right aligned
+                                           (alignment on data register LSB bit 0)*/
+#define LL_ADC_DATA_ALIGN_LEFT             (ADC_CFGR_ALIGN)   /*!< ADC conversion data alignment: left aligned
+                                           (alignment on data register MSB bit 15)*/
 /**
   * @}
   */
@@ -721,19 +840,30 @@
 /** @defgroup ADC_LL_EC_LP_MODE  ADC instance - Low power mode
   * @{
   */
-#define LL_ADC_LP_MODE_NONE                (0x00000000UL)                      /*!< No ADC low power mode activated */
-#define LL_ADC_LP_AUTOWAIT                 (ADC_CFGR_AUTDLY)                   /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */
+#define LL_ADC_LP_MODE_NONE                (0x00000000UL)     /*!< No ADC low power mode activated */
+#define LL_ADC_LP_AUTOWAIT                 (ADC_CFGR_AUTDLY)  /*!< ADC low power mode auto delay: Dynamic low power
+                                           mode, ADC conversions are performed only when necessary
+                                           (when previous ADC conversion data is read).
+                                           See description with function @ref LL_ADC_SetLowPowerMode(). */
 /**
   * @}
   */
 
-/** @defgroup ADC_LL_EC_OFFSET_NB  ADC instance - Offset number
+/** @defgroup ADC_LL_EC_OFFSET_NB  ADC instance - Offset instance
   * @{
   */
-#define LL_ADC_OFFSET_1                    ADC_OFR1_REGOFFSET /*!< ADC offset number 1: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
-#define LL_ADC_OFFSET_2                    ADC_OFR2_REGOFFSET /*!< ADC offset number 2: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
-#define LL_ADC_OFFSET_3                    ADC_OFR3_REGOFFSET /*!< ADC offset number 3: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
-#define LL_ADC_OFFSET_4                    ADC_OFR4_REGOFFSET /*!< ADC offset number 4: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */
+#define LL_ADC_OFFSET_1                    ADC_OFR1_REGOFFSET /*!< ADC offset instance 1: ADC channel and offset level
+                                           to which the offset programmed will be applied (independently of channel
+                                           mapped on ADC group regular or injected) */
+#define LL_ADC_OFFSET_2                    ADC_OFR2_REGOFFSET /*!< ADC offset instance 2: ADC channel and offset level
+                                           to which the offset programmed will be applied (independently of channel
+                                           mapped on ADC group regular or injected) */
+#define LL_ADC_OFFSET_3                    ADC_OFR3_REGOFFSET /*!< ADC offset instance 3: ADC channel and offset level
+                                           to which the offset programmed will be applied (independently of channel
+                                           mapped on ADC group regular or injected) */
+#define LL_ADC_OFFSET_4                    ADC_OFR4_REGOFFSET /*!< ADC offset instance 4: ADC channel and offset level
+                                           to which the offset programmed will be applied (independently of channel
+                                           mapped on ADC group regular or injected) */
 /**
   * @}
   */
@@ -741,8 +871,10 @@
 /** @defgroup ADC_LL_EC_OFFSET_STATE ADC instance - Offset state
   * @{
   */
-#define LL_ADC_OFFSET_DISABLE              (0x00000000UL)         /*!< ADC offset disabled (among ADC selected offset number 1, 2, 3 or 4) */
-#define LL_ADC_OFFSET_ENABLE               (ADC_OFR1_OFFSET1_EN)  /*!< ADC offset enabled (among ADC selected offset number 1, 2, 3 or 4) */
+#define LL_ADC_OFFSET_DISABLE              (0x00000000UL)         /*!< ADC offset disabled
+                                           (setting offset instance wise) */
+#define LL_ADC_OFFSET_ENABLE               (ADC_OFR1_OFFSET1_EN)  /*!< ADC offset enabled
+                                           (setting offset instance wise) */
 /**
   * @}
   */
@@ -750,9 +882,10 @@
 /** @defgroup ADC_LL_EC_GROUPS  ADC instance - Groups
   * @{
   */
-#define LL_ADC_GROUP_REGULAR               (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */
-#define LL_ADC_GROUP_INJECTED              (0x00000002UL) /*!< ADC group injected (not available on all STM32 devices)*/
-#define LL_ADC_GROUP_REGULAR_INJECTED      (0x00000003UL) /*!< ADC both groups regular and injected */
+#define LL_ADC_GROUP_REGULAR               (0x00000001UL)     /*!< ADC group regular (available on all STM32 devices) */
+#define LL_ADC_GROUP_INJECTED              (0x00000002UL)     /*!< ADC group injected (not available on all STM32
+                                           devices)*/
+#define LL_ADC_GROUP_REGULAR_INJECTED      (0x00000003UL)     /*!< ADC both groups regular and injected */
 /**
   * @}
   */
@@ -760,37 +893,77 @@
 /** @defgroup ADC_LL_EC_CHANNEL  ADC instance - Channel number
   * @{
   */
-#define LL_ADC_CHANNEL_0                   (ADC_CHANNEL_0_NUMBER  | ADC_CHANNEL_0_SMP  | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0  */
-#define LL_ADC_CHANNEL_1                   (ADC_CHANNEL_1_NUMBER  | ADC_CHANNEL_1_SMP  | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1  */
-#define LL_ADC_CHANNEL_2                   (ADC_CHANNEL_2_NUMBER  | ADC_CHANNEL_2_SMP  | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2  */
-#define LL_ADC_CHANNEL_3                   (ADC_CHANNEL_3_NUMBER  | ADC_CHANNEL_3_SMP  | ADC_CHANNEL_3_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3  */
-#define LL_ADC_CHANNEL_4                   (ADC_CHANNEL_4_NUMBER  | ADC_CHANNEL_4_SMP  | ADC_CHANNEL_4_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4  */
-#define LL_ADC_CHANNEL_5                   (ADC_CHANNEL_5_NUMBER  | ADC_CHANNEL_5_SMP  | ADC_CHANNEL_5_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5  */
-#define LL_ADC_CHANNEL_6                   (ADC_CHANNEL_6_NUMBER  | ADC_CHANNEL_6_SMP  | ADC_CHANNEL_6_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6  */
-#define LL_ADC_CHANNEL_7                   (ADC_CHANNEL_7_NUMBER  | ADC_CHANNEL_7_SMP  | ADC_CHANNEL_7_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7  */
-#define LL_ADC_CHANNEL_8                   (ADC_CHANNEL_8_NUMBER  | ADC_CHANNEL_8_SMP  | ADC_CHANNEL_8_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8  */
-#define LL_ADC_CHANNEL_9                   (ADC_CHANNEL_9_NUMBER  | ADC_CHANNEL_9_SMP  | ADC_CHANNEL_9_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9  */
-#define LL_ADC_CHANNEL_10                  (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_SMP | ADC_CHANNEL_10_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */
-#define LL_ADC_CHANNEL_11                  (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_SMP | ADC_CHANNEL_11_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */
-#define LL_ADC_CHANNEL_12                  (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_SMP | ADC_CHANNEL_12_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */
-#define LL_ADC_CHANNEL_13                  (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_SMP | ADC_CHANNEL_13_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */
-#define LL_ADC_CHANNEL_14                  (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_SMP | ADC_CHANNEL_14_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */
-#define LL_ADC_CHANNEL_15                  (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_SMP | ADC_CHANNEL_15_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */
-#define LL_ADC_CHANNEL_16                  (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_SMP | ADC_CHANNEL_16_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */
-#define LL_ADC_CHANNEL_17                  (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_SMP | ADC_CHANNEL_17_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */
-#define LL_ADC_CHANNEL_18                  (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_SMP | ADC_CHANNEL_18_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */
-#define LL_ADC_CHANNEL_VREFINT             (LL_ADC_CHANNEL_0  | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. On STM32L4, ADC channel available only on ADC instance: ADC1. */
-#define LL_ADC_CHANNEL_TEMPSENSOR          (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. On STM32L4, ADC channel available only on ADC instances: ADC1, ADC3. */
-#define LL_ADC_CHANNEL_VBAT                (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. On STM32L4, ADC channel available only on ADC instances: ADC1, ADC3. */
+#define LL_ADC_CHANNEL_0                   (ADC_CHANNEL_0_NUMBER  | ADC_CHANNEL_0_SMP \
+                                            | ADC_CHANNEL_0_BITFIELD)                       /*!< ADC channel ADCx_IN0 */
+#define LL_ADC_CHANNEL_1                   (ADC_CHANNEL_1_NUMBER  | ADC_CHANNEL_1_SMP \
+                                            | ADC_CHANNEL_1_BITFIELD)                       /*!< ADC channel ADCx_IN1 */
+#define LL_ADC_CHANNEL_2                   (ADC_CHANNEL_2_NUMBER  | ADC_CHANNEL_2_SMP \
+                                            | ADC_CHANNEL_2_BITFIELD)                       /*!< ADC channel ADCx_IN2 */
+#define LL_ADC_CHANNEL_3                   (ADC_CHANNEL_3_NUMBER  | ADC_CHANNEL_3_SMP \
+                                            | ADC_CHANNEL_3_BITFIELD)                       /*!< ADC channel ADCx_IN3 */
+#define LL_ADC_CHANNEL_4                   (ADC_CHANNEL_4_NUMBER  | ADC_CHANNEL_4_SMP \
+                                            | ADC_CHANNEL_4_BITFIELD)                       /*!< ADC channel ADCx_IN4 */
+#define LL_ADC_CHANNEL_5                   (ADC_CHANNEL_5_NUMBER  | ADC_CHANNEL_5_SMP \
+                                            | ADC_CHANNEL_5_BITFIELD)                       /*!< ADC channel ADCx_IN5 */
+#define LL_ADC_CHANNEL_6                   (ADC_CHANNEL_6_NUMBER  | ADC_CHANNEL_6_SMP \
+                                            | ADC_CHANNEL_6_BITFIELD)                       /*!< ADC channel ADCx_IN6 */
+#define LL_ADC_CHANNEL_7                   (ADC_CHANNEL_7_NUMBER  | ADC_CHANNEL_7_SMP \
+                                            | ADC_CHANNEL_7_BITFIELD)                       /*!< ADC channel ADCx_IN7 */
+#define LL_ADC_CHANNEL_8                   (ADC_CHANNEL_8_NUMBER  | ADC_CHANNEL_8_SMP \
+                                            | ADC_CHANNEL_8_BITFIELD)                       /*!< ADC channel ADCx_IN8 */
+#define LL_ADC_CHANNEL_9                   (ADC_CHANNEL_9_NUMBER  | ADC_CHANNEL_9_SMP \
+                                            | ADC_CHANNEL_9_BITFIELD)                       /*!< ADC channel ADCx_IN9 */
+#define LL_ADC_CHANNEL_10                  (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_SMP \
+                                            | ADC_CHANNEL_10_BITFIELD)                      /*!< ADC channel ADCx_IN10 */
+#define LL_ADC_CHANNEL_11                  (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_SMP \
+                                            | ADC_CHANNEL_11_BITFIELD)                      /*!< ADC channel ADCx_IN11 */
+#define LL_ADC_CHANNEL_12                  (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_SMP \
+                                            | ADC_CHANNEL_12_BITFIELD)                      /*!< ADC channel ADCx_IN12 */
+#define LL_ADC_CHANNEL_13                  (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_SMP \
+                                            | ADC_CHANNEL_13_BITFIELD)                      /*!< ADC channel ADCx_IN13 */
+#define LL_ADC_CHANNEL_14                  (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_SMP \
+                                            | ADC_CHANNEL_14_BITFIELD)                      /*!< ADC channel ADCx_IN14 */
+#define LL_ADC_CHANNEL_15                  (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_SMP \
+                                            | ADC_CHANNEL_15_BITFIELD)                      /*!< ADC channel ADCx_IN15 */
+#define LL_ADC_CHANNEL_16                  (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_SMP | \
+                                           ADC_CHANNEL_16_BITFIELD)                        /*!< ADC channel ADCx_IN16 */
+#define LL_ADC_CHANNEL_17                  (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_SMP | \
+                                           ADC_CHANNEL_17_BITFIELD)                        /*!< ADC channel ADCx_IN17 */
+#define LL_ADC_CHANNEL_18                  (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_SMP | \
+                                           ADC_CHANNEL_18_BITFIELD)                        /*!< ADC channel ADCx_IN18 */
+#define LL_ADC_CHANNEL_VREFINT             (LL_ADC_CHANNEL_0  | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel
+                                           connected to VrefInt: Internal voltage reference.
+                                           On STM32L4, ADC channel available only on ADC instance: ADC1. */
+#define LL_ADC_CHANNEL_TEMPSENSOR          (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel
+                                           connected to internal temperature sensor.
+                                           On STM32L4, ADC channel available only on ADC instances: ADC1, ADC3. */
+#define LL_ADC_CHANNEL_VBAT                (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel
+                                           connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3
+                                           to have channel voltage always below Vdda.
+                                           On STM32L4, ADC channel available only on ADC instances: ADC1, ADC3. */
 #if defined(ADC1) && !defined(ADC2)
-#define LL_ADC_CHANNEL_DAC1CH1             (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2) /*!< ADC internal channel connected to DAC1 channel 1, channel specific to ADC1. This channel is shared with ADC internal channel connected to temperature sensor, selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
-#define LL_ADC_CHANNEL_DAC1CH2             (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2) /*!< ADC internal channel connected to DAC1 channel 2, channel specific to ADC1. This channel is shared with ADC internal channel connected to Vbat, selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
+#define LL_ADC_CHANNEL_DAC1CH1             (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH | \
+                                           ADC_CHANNEL_ID_INTERNAL_CH_2)                      /*!< ADC internal channel
+                                           connected to DAC1 channel 1, channel specific to ADC1. This channel is
+                                           shared with ADC internal channel connected to internal temperature sensor,
+                                           selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
+#define LL_ADC_CHANNEL_DAC1CH2             (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH | \
+                                           ADC_CHANNEL_ID_INTERNAL_CH_2)                      /*!< ADC internal channel
+                                           connected to DAC1 channel 2, channel specific to ADC1. This channel is
+                                           shared with ADC internal channel connected to Vbat,
+                                           selection is done using function @ref LL_ADC_SetCommonPathInternalCh(). */
 #elif defined(ADC2)
-#define LL_ADC_CHANNEL_DAC1CH1_ADC2        (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2) /*!< ADC internal channel connected to DAC1 channel 1, channel specific to ADC2 */
-#define LL_ADC_CHANNEL_DAC1CH2_ADC2        (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2) /*!< ADC internal channel connected to DAC1 channel 2, channel specific to ADC2 */
+#define LL_ADC_CHANNEL_DAC1CH1_ADC2        (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH | \
+                                           ADC_CHANNEL_ID_INTERNAL_CH_2)                      /*!< ADC internal channel
+                                           connected to DAC1 channel 1, channel specific to ADC2 */
+#define LL_ADC_CHANNEL_DAC1CH2_ADC2        (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH | \
+                                           ADC_CHANNEL_ID_INTERNAL_CH_2)                      /*!< ADC internal channel
+                                           connected to DAC1 channel 2, channel specific to ADC2 */
 #if defined(ADC3)
-#define LL_ADC_CHANNEL_DAC1CH1_ADC3        (LL_ADC_CHANNEL_14 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to DAC1 channel 1, channel specific to ADC3 */
-#define LL_ADC_CHANNEL_DAC1CH2_ADC3        (LL_ADC_CHANNEL_15 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to DAC1 channel 2, channel specific to ADC3 */
+#define LL_ADC_CHANNEL_DAC1CH1_ADC3        (LL_ADC_CHANNEL_14 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel
+                                           connected to DAC1 channel 1, channel specific to ADC3 */
+#define LL_ADC_CHANNEL_DAC1CH2_ADC3        (LL_ADC_CHANNEL_15 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel
+                                           connected to DAC1 channel 2, channel specific to ADC3 */
 #endif /* ADC3 */
 #endif /* ADC1 && !ADC2 */
 /**
@@ -800,23 +973,74 @@
 /** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE  ADC group regular - Trigger source
   * @{
   */
-#define LL_ADC_REG_TRIG_SOFTWARE           (0x00000000UL)                                                                                                  /*!< ADC group regular conversion trigger internal: SW start. */
-#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2     (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM1_CH1       (ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                                                 /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM1_CH2       (ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM1_CH3       (ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM2_CH2       (ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO      (ADC_CFGR_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM3_CH4       (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM4_CH4       (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group regular conversion trigger from external peripheral: TIM4 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO      (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group regular conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO2     (ADC_CFGR_EXTSEL_3 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group regular conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO     (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11    (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_SOFTWARE           (0x00000000UL)                                        /*!< ADC group regular
+                                           conversion trigger internal: SW start. */
+#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2     (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH1       (ADC_REG_TRIG_EXT_EDGE_DEFAULT)                       /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM1 channel 1 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH2       (ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM1 channel 2 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH3       (ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM1 channel 3 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | \
+                                           ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)    /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_CH2       (ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM2 channel 2 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO      (ADC_CFGR_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM3_CH4       (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | \
+                                           ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM3 channel 4 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM4_CH4       (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM4 channel 4 event (capture
+                                           compare: input capture or output capture). Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO      (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | \
+                                           ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)    /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO      (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | \
+                                           ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)    /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO2     (ADC_CFGR_EXTSEL_3 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO     (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | \
+                                           ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)    /*!< ADC group regular
+                                           conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11    (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | \
+                                           ADC_REG_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group regular
+                                           conversion trigger from external peripheral: external interrupt line 11.
+                                           Trigger edge set to rising edge (default setting). */
 /**
   * @}
   */
@@ -824,9 +1048,12 @@
 /** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE  ADC group regular - Trigger edge
   * @{
   */
-#define LL_ADC_REG_TRIG_EXT_RISING         (                   ADC_CFGR_EXTEN_0)   /*!< ADC group regular conversion trigger polarity set to rising edge */
-#define LL_ADC_REG_TRIG_EXT_FALLING        (ADC_CFGR_EXTEN_1                   )   /*!< ADC group regular conversion trigger polarity set to falling edge */
-#define LL_ADC_REG_TRIG_EXT_RISINGFALLING  (ADC_CFGR_EXTEN_1 | ADC_CFGR_EXTEN_0)   /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */
+#define LL_ADC_REG_TRIG_EXT_RISING         (ADC_CFGR_EXTEN_0)                      /*!< ADC group regular conversion
+                                           trigger polarity set to rising edge */
+#define LL_ADC_REG_TRIG_EXT_FALLING        (ADC_CFGR_EXTEN_1)                      /*!< ADC group regular conversion
+                                           trigger polarity set to falling edge */
+#define LL_ADC_REG_TRIG_EXT_RISINGFALLING  (ADC_CFGR_EXTEN_1 | ADC_CFGR_EXTEN_0)   /*!< ADC group regular conversion
+                                           trigger polarity set to both rising and falling edges */
 /**
   * @}
   */
@@ -834,8 +1061,11 @@
 /** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE  ADC group regular - Continuous mode
   * @{
   */
-#define LL_ADC_REG_CONV_SINGLE             (0x00000000UL)          /*!< ADC conversions are performed in single mode: one conversion per trigger */
-#define LL_ADC_REG_CONV_CONTINUOUS         (ADC_CFGR_CONT)         /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */
+#define LL_ADC_REG_CONV_SINGLE             (0x00000000UL)     /*!< ADC conversions performed in single mode:
+                                           one conversion per trigger */
+#define LL_ADC_REG_CONV_CONTINUOUS         (ADC_CFGR_CONT)    /*!< ADC conversions performed in continuous mode:
+                                           after the first trigger, following conversions launched successively
+                                           automatically */
 /**
   * @}
   */
@@ -843,9 +1073,15 @@
 /** @defgroup ADC_LL_EC_REG_DMA_TRANSFER  ADC group regular - DMA transfer of ADC conversion data
   * @{
   */
-#define LL_ADC_REG_DMA_TRANSFER_NONE       (0x00000000UL)                        /*!< ADC conversions are not transferred by DMA */
-#define LL_ADC_REG_DMA_TRANSFER_LIMITED    (                  ADC_CFGR_DMAEN)    /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */
-#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED  (ADC_CFGR_DMACFG | ADC_CFGR_DMAEN)    /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */
+#define LL_ADC_REG_DMA_TRANSFER_NONE       (0x00000000UL)     /*!< ADC conversions are not transferred by DMA */
+#define LL_ADC_REG_DMA_TRANSFER_LIMITED    (ADC_CFGR_DMAEN)   /*!< ADC conversion data are transferred by DMA
+                                           in limited mode (one shot mode): DMA transfer requests are stopped when
+                                           number of DMA data transfers (number of ADC conversions) is reached.
+                                           This ADC mode is intended to be used with DMA mode non-circular. */
+#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED  (ADC_CFGR_DMACFG | ADC_CFGR_DMAEN)    /*!< ADC conversion data are
+                                           transferred by DMA, in unlimited mode: DMA transfer requests are unlimited,
+                                           whatever number of DMA data transferred (number of ADC conversions).
+                                           This ADC mode is intended to be used with DMA mode circular. */
 /**
   * @}
   */
@@ -854,8 +1090,11 @@
 /** @defgroup ADC_LL_EC_REG_DFSDM_TRANSFER ADC group regular - DFSDM transfer of ADC conversion data
   * @{
   */
-#define LL_ADC_REG_DFSDM_TRANSFER_NONE     (0x00000000UL)          /*!< ADC conversions are not transferred by DFSDM. */
-#define LL_ADC_REG_DFSDM_TRANSFER_ENABLE   (ADC_CFGR_DFSDMCFG)     /*!< ADC conversion data are transferred to DFSDM for post processing. The ADC conversion data format must be 16-bit signed and right aligned, refer to reference manual. DFSDM transfer cannot be used if DMA transfer is enabled. */
+#define LL_ADC_REG_DFSDM_TRANSFER_NONE     (0x00000000UL)      /*!< ADC conversions are not transferred by DFSDM. */
+#define LL_ADC_REG_DFSDM_TRANSFER_ENABLE   (ADC_CFGR_DFSDMCFG) /*!< ADC conversion data are transferred to DFSDM for
+                                           post processing. The ADC conversion data format must be 16-bit signed and
+                                           right aligned, refer to reference manual.
+                                           DFSDM transfer cannot be used if DMA transfer is enabled. */
 /**
   * @}
   */
@@ -866,17 +1105,22 @@
   * @{
   */
 #define LL_ADC_SAMPLINGTIME_COMMON_DEFAULT      (0x00000000UL)      /*!< ADC sampling time let to default settings. */
-#define LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5 (ADC_SMPR1_SMPPLUS) /*!< ADC additional sampling time 3.5 ADC clock cycles replacing 2.5 ADC clock cycles (this applies to all channels mapped with selection sampling time 2.5 ADC clock cycles, whatever channels mapped on ADC groups regular or injected). */
+#define LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5 (ADC_SMPR1_SMPPLUS) /*!< ADC additional sampling time 3.5 ADC clock
+                                           cycles replacing 2.5 ADC clock cycles (this applies to all channels mapped
+                                           with selection sampling time 2.5 ADC clock cycles, whatever channels mapped
+                                           on ADC groups regular or injected). */
 /**
   * @}
   */
-#endif
+#endif /* ADC_SMPR1_SMPPLUS */
 
 /** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR  ADC group regular - Overrun behavior on conversion data
   * @{
   */
-#define LL_ADC_REG_OVR_DATA_PRESERVED      (0x00000000UL)         /*!< ADC group regular behavior in case of overrun: data preserved */
-#define LL_ADC_REG_OVR_DATA_OVERWRITTEN    (ADC_CFGR_OVRMOD)      /*!< ADC group regular behavior in case of overrun: data overwritten */
+#define LL_ADC_REG_OVR_DATA_PRESERVED      (0x00000000UL)     /*!< ADC group regular behavior in case of overrun:
+                                                                   data preserved */
+#define LL_ADC_REG_OVR_DATA_OVERWRITTEN    (ADC_CFGR_OVRMOD)  /*!< ADC group regular behavior in case of overrun:
+                                                                   data overwritten */
 /**
   * @}
   */
@@ -884,22 +1128,43 @@
 /** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH  ADC group regular - Sequencer scan length
   * @{
   */
-#define LL_ADC_REG_SEQ_SCAN_DISABLE        (0x00000000UL)                                              /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS  (                                             ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS  (                              ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS  (                              ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS  (               ADC_SQR1_L_2                              ) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS  (               ADC_SQR1_L_2                | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS  (               ADC_SQR1_L_2 | ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS  (               ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS  (ADC_SQR1_L_3                                             ) /*!< ADC group regular sequencer enable with 9 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (ADC_SQR1_L_3                               | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 10 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (ADC_SQR1_L_3                | ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 11 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (ADC_SQR1_L_3                | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 12 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2                              ) /*!< ADC group regular sequencer enable with 13 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2                | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 14 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 15 ranks in the sequence */
-#define LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 16 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_DISABLE        (0x00000000UL)                 /*!< ADC group regular sequencer disable
+                                           (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS  (ADC_SQR1_L_0)                 /*!< ADC group regular sequencer enable
+                                           with 2 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS  (ADC_SQR1_L_1)                 /*!< ADC group regular sequencer enable
+                                           with 3 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS  (ADC_SQR1_L_1 | ADC_SQR1_L_0)  /*!< ADC group regular sequencer enable
+                                           with 4 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS  (ADC_SQR1_L_2)                 /*!< ADC group regular sequencer enable
+                                           with 5 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS  (ADC_SQR1_L_2 | ADC_SQR1_L_0)  /*!< ADC group regular sequencer enable
+                                           with 6 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS  (ADC_SQR1_L_2 | ADC_SQR1_L_1) /*!< ADC group regular sequencer enable
+                                           with 7 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS  (ADC_SQR1_L_2 | ADC_SQR1_L_1 \
+                                            | ADC_SQR1_L_0)                /*!< ADC group regular sequencer enable
+                                           with 8 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS  (ADC_SQR1_L_3)                 /*!< ADC group regular sequencer enable
+                                           with 9 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_0)  /*!< ADC group regular sequencer enable
+                                           with 10 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_1)  /*!< ADC group regular sequencer enable
+                                           with 11 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_1 \
+                                            | ADC_SQR1_L_0)                /*!< ADC group regular sequencer enable
+                                           with 12 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2)  /*!< ADC group regular sequencer enable
+                                           with 13 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 \
+                                            | ADC_SQR1_L_0)                /*!< ADC group regular sequencer enable
+                                           with 14 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 \
+                                            | ADC_SQR1_L_1)                /*!< ADC group regular sequencerenable
+                                           with 15 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 \
+                                            | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable
+                                                                              with 16 ranks in the sequence */
 /**
   * @}
   */
@@ -907,15 +1172,28 @@
 /** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE  ADC group regular - Sequencer discontinuous mode
   * @{
   */
-#define LL_ADC_REG_SEQ_DISCONT_DISABLE     (0x00000000UL)                                                               /*!< ADC group regular sequencer discontinuous mode disable */
-#define LL_ADC_REG_SEQ_DISCONT_1RANK       (                                                               ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */
-#define LL_ADC_REG_SEQ_DISCONT_2RANKS      (                                          ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enabled with sequence interruption every 2 ranks */
-#define LL_ADC_REG_SEQ_DISCONT_3RANKS      (                     ADC_CFGR_DISCNUM_1                      | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 3 ranks */
-#define LL_ADC_REG_SEQ_DISCONT_4RANKS      (                     ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 4 ranks */
-#define LL_ADC_REG_SEQ_DISCONT_5RANKS      (ADC_CFGR_DISCNUM_2                                           | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 5 ranks */
-#define LL_ADC_REG_SEQ_DISCONT_6RANKS      (ADC_CFGR_DISCNUM_2                      | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 6 ranks */
-#define LL_ADC_REG_SEQ_DISCONT_7RANKS      (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1                      | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 7 ranks */
-#define LL_ADC_REG_SEQ_DISCONT_8RANKS      (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 8 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_DISABLE     (0x00000000UL)                          /*!< ADC group regular sequencer
+                                           discontinuous mode disable */
+#define LL_ADC_REG_SEQ_DISCONT_1RANK       (ADC_CFGR_DISCEN)                       /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every rank */
+#define LL_ADC_REG_SEQ_DISCONT_2RANKS      (ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN)  /*!< ADC group regular sequencer
+                                           discontinuous mode enabled with sequence interruption every 2 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_3RANKS      (ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCEN)  /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every 3 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_4RANKS      (ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCNUM_0 \
+                                            | ADC_CFGR_DISCEN)                       /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every 4 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_5RANKS      (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCEN)   /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every 5 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_6RANKS      (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_0 \
+                                            | ADC_CFGR_DISCEN)                       /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every 6 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_7RANKS      (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 \
+                                            | ADC_CFGR_DISCEN)                       /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every 7 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_8RANKS      (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 \
+                                            | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN)  /*!< ADC group regular sequencer
+                                           discontinuous mode enable with sequence interruption every 8 ranks */
 /**
   * @}
   */
@@ -923,22 +1201,38 @@
 /** @defgroup ADC_LL_EC_REG_SEQ_RANKS  ADC group regular - Sequencer ranks
   * @{
   */
-#define LL_ADC_REG_RANK_1                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_1_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 1 */
-#define LL_ADC_REG_RANK_2                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_2_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 2 */
-#define LL_ADC_REG_RANK_3                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_3_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 3 */
-#define LL_ADC_REG_RANK_4                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_4_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 4 */
-#define LL_ADC_REG_RANK_5                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_5_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 5 */
-#define LL_ADC_REG_RANK_6                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_6_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 6 */
-#define LL_ADC_REG_RANK_7                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_7_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 7 */
-#define LL_ADC_REG_RANK_8                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_8_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 8 */
-#define LL_ADC_REG_RANK_9                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_9_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 9 */
-#define LL_ADC_REG_RANK_10                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_10_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 10 */
-#define LL_ADC_REG_RANK_11                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_11_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 11 */
-#define LL_ADC_REG_RANK_12                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_12_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 12 */
-#define LL_ADC_REG_RANK_13                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_13_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 13 */
-#define LL_ADC_REG_RANK_14                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_14_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 14 */
-#define LL_ADC_REG_RANK_15                 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_15_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 15 */
-#define LL_ADC_REG_RANK_16                 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_16_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 16 */
+#define LL_ADC_REG_RANK_1                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_1_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 1 */
+#define LL_ADC_REG_RANK_2                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_2_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 2 */
+#define LL_ADC_REG_RANK_3                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_3_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 3 */
+#define LL_ADC_REG_RANK_4                  (ADC_SQR1_REGOFFSET | ADC_REG_RANK_4_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 4 */
+#define LL_ADC_REG_RANK_5                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_5_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 5 */
+#define LL_ADC_REG_RANK_6                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_6_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 6 */
+#define LL_ADC_REG_RANK_7                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_7_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 7 */
+#define LL_ADC_REG_RANK_8                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_8_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 8 */
+#define LL_ADC_REG_RANK_9                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_9_SQRX_BITOFFSET_POS)  /*!< ADC group
+                                           regular sequencer rank 9 */
+#define LL_ADC_REG_RANK_10                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_10_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 10 */
+#define LL_ADC_REG_RANK_11                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_11_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 11 */
+#define LL_ADC_REG_RANK_12                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_12_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 12 */
+#define LL_ADC_REG_RANK_13                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_13_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 13 */
+#define LL_ADC_REG_RANK_14                 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_14_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 14 */
+#define LL_ADC_REG_RANK_15                 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_15_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 15 */
+#define LL_ADC_REG_RANK_16                 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_16_SQRX_BITOFFSET_POS) /*!< ADC group
+                                           regular sequencer rank 16 */
 /**
   * @}
   */
@@ -946,23 +1240,74 @@
 /** @defgroup ADC_LL_EC_INJ_TRIGGER_SOURCE  ADC group injected - Trigger source
   * @{
   */
-#define LL_ADC_INJ_TRIG_SOFTWARE           (0x00000000UL)                                                                                                      /*!< ADC group injected conversion trigger internal: SW start.. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO      (ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                                                     /*!< ADC group injected conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2     (ADC_JSQR_JEXTSEL_3 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                                /*!< ADC group injected conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM1_CH4       (ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                                /*!< ADC group injected conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO      (ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                                /*!< ADC group injected conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1       (ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                           /*!< ADC group injected conversion trigger from external peripheral: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM3_TRGO      (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                           /*!< ADC group injected conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM3_CH1       (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                      /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM3_CH3       (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                      /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4       (ADC_JSQR_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                                /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO      (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                           /*!< ADC group injected conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM6_TRGO      (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                      /*!< ADC group injected conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM8_CH4       (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                      /*!< ADC group injected conversion trigger from external peripheral: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM8_TRGO      (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                           /*!< ADC group injected conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM8_TRGO2     (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                           /*!< ADC group injected conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_TIM15_TRGO     (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15    (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                           /*!< ADC group injected conversion trigger from external peripheral: external interrupt line 15. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_SOFTWARE           (0x00000000UL)                                        /*!< ADC group injected
+                                           conversion trigger internal: SW start. */
+#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO      (ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                       /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2     (ADC_JSQR_JEXTSEL_3 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)  /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM1_CH4       (ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)  /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM1 channel 4 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO      (ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)  /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1       (ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM2 channel 1 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM3_TRGO      (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM3_CH1       (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | \
+                                           ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM3 channel 1 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM3_CH3       (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | \
+                                           ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM3 channel 3 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4       (ADC_JSQR_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)  /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM3 channel 4 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO      (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM6_TRGO      (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | \
+                                           ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM8_CH4       (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | \
+                                           ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)   /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM8 channel 4 event (capture
+                                           compare: input capture or output capture). Trigger edge set to rising edge
+                                           (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM8_TRGO      (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM8_TRGO2     (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM15_TRGO     (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | \
+                                           ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to
+                                           rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15    (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | \
+                                           ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                        /*!< ADC group injected
+                                           conversion trigger from external peripheral: external interrupt line 15.
+                                           Trigger edge set to rising edge (default setting). */
 /**
   * @}
   */
@@ -970,9 +1315,12 @@
 /** @defgroup ADC_LL_EC_INJ_TRIGGER_EDGE  ADC group injected - Trigger edge
   * @{
   */
-#define LL_ADC_INJ_TRIG_EXT_RISING         (                    ADC_JSQR_JEXTEN_0) /*!< ADC group injected conversion trigger polarity set to rising edge */
-#define LL_ADC_INJ_TRIG_EXT_FALLING        (ADC_JSQR_JEXTEN_1                    ) /*!< ADC group injected conversion trigger polarity set to falling edge */
-#define LL_ADC_INJ_TRIG_EXT_RISINGFALLING  (ADC_JSQR_JEXTEN_1 | ADC_JSQR_JEXTEN_0) /*!< ADC group injected conversion trigger polarity set to both rising and falling edges */
+#define LL_ADC_INJ_TRIG_EXT_RISING         (                    ADC_JSQR_JEXTEN_0) /*!< ADC group injected conversion
+                                           trigger polarity set to rising edge */
+#define LL_ADC_INJ_TRIG_EXT_FALLING        (ADC_JSQR_JEXTEN_1                    ) /*!< ADC group injected conversion
+                                           trigger polarity set to falling edge */
+#define LL_ADC_INJ_TRIG_EXT_RISINGFALLING  (ADC_JSQR_JEXTEN_1 | ADC_JSQR_JEXTEN_0) /*!< ADC group injected conversion
+                                           trigger polarity set to both rising and falling edges */
 /**
   * @}
   */
@@ -980,8 +1328,14 @@
 /** @defgroup ADC_LL_EC_INJ_TRIG_AUTO  ADC group injected - Automatic trigger mode
   * @{
   */
-#define LL_ADC_INJ_TRIG_INDEPENDENT        (0x00000000UL)         /*!< ADC group injected conversion trigger independent. Setting mandatory if ADC group injected injected trigger source is set to an external trigger. */
-#define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR   (ADC_CFGR_JAUTO)       /*!< ADC group injected conversion trigger from ADC group regular. Setting compliant only with group injected trigger source set to SW start, without any further action on  ADC group injected conversion start or stop: in this case, ADC group injected is controlled only from ADC group regular. */
+#define LL_ADC_INJ_TRIG_INDEPENDENT        (0x00000000UL)     /*!< ADC group injected conversion trigger independent.
+                                           Setting mandatory if ADC group injected injected trigger source is set to
+                                           an external trigger. */
+#define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR   (ADC_CFGR_JAUTO)   /*!< ADC group injected conversion trigger from ADC group
+                                           regular. Setting compliant only with group injected trigger source set to
+                                           SW start, without any further action on  ADC group injected conversion start
+                                           or stop: in this case, ADC group injected is controlled only from ADC group
+                                           regular. */
 /**
   * @}
   */
@@ -989,9 +1343,14 @@
 /** @defgroup ADC_LL_EC_INJ_CONTEXT_QUEUE  ADC group injected - Context queue mode
   * @{
   */
-#define LL_ADC_INJ_QUEUE_2CONTEXTS_LAST_ACTIVE (0x00000000UL)         /* Group injected sequence context queue is enabled and can contain up to 2 contexts. When all contexts have been processed, the queue maintains the last context active perpetually. */
-#define LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY   (ADC_CFGR_JQM)         /* Group injected sequence context queue is enabled and can contain up to 2 contexts. When all contexts have been processed, the queue is empty and injected group triggers are disabled. */
-#define LL_ADC_INJ_QUEUE_DISABLE               (ADC_CFGR_JQDIS)       /* Group injected sequence context queue is disabled: only 1 sequence can be configured and is active perpetually. */
+#define LL_ADC_INJ_QUEUE_2CONTEXTS_LAST_ACTIVE (0x00000000UL)   /* Group injected sequence context queue is enabled
+                                           and can contain up to 2 contexts. When all contexts have been processed,
+                                           the queue maintains the last context active perpetually. */
+#define LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY   (ADC_CFGR_JQM)   /* Group injected sequence context queue is enabled
+                                           and can contain up to 2 contexts. When all contexts have been processed,
+                                           the queue is empty and injected group triggers are disabled. */
+#define LL_ADC_INJ_QUEUE_DISABLE               (ADC_CFGR_JQDIS) /* Group injected sequence context queue is disabled:
+                                           only 1 sequence can be configured and is active perpetually. */
 /**
   * @}
   */
@@ -999,10 +1358,14 @@
 /** @defgroup ADC_LL_EC_INJ_SEQ_SCAN_LENGTH  ADC group injected - Sequencer scan length
   * @{
   */
-#define LL_ADC_INJ_SEQ_SCAN_DISABLE        (0x00000000UL)                  /*!< ADC group injected sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */
-#define LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS  (                ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 2 ranks in the sequence */
-#define LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS  (ADC_JSQR_JL_1                ) /*!< ADC group injected sequencer enable with 3 ranks in the sequence */
-#define LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS  (ADC_JSQR_JL_1 | ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 4 ranks in the sequence */
+#define LL_ADC_INJ_SEQ_SCAN_DISABLE        (0x00000000UL)                  /*!< ADC group injected sequencer disable
+                                           (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */
+#define LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS  (                ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable
+                                           with 2 ranks in the sequence */
+#define LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS  (ADC_JSQR_JL_1                ) /*!< ADC group injected sequencer enable
+                                           with 3 ranks in the sequence */
+#define LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS  (ADC_JSQR_JL_1 | ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable
+                                           with 4 ranks in the sequence */
 /**
   * @}
   */
@@ -1010,8 +1373,10 @@
 /** @defgroup ADC_LL_EC_INJ_SEQ_DISCONT_MODE  ADC group injected - Sequencer discontinuous mode
   * @{
   */
-#define LL_ADC_INJ_SEQ_DISCONT_DISABLE     (0x00000000UL)         /*!< ADC group injected sequencer discontinuous mode disable */
-#define LL_ADC_INJ_SEQ_DISCONT_1RANK       (ADC_CFGR_JDISCEN)     /*!< ADC group injected sequencer discontinuous mode enable with sequence interruption every rank */
+#define LL_ADC_INJ_SEQ_DISCONT_DISABLE     (0x00000000UL)     /*!< ADC group injected sequencer discontinuous mode
+                                           disable */
+#define LL_ADC_INJ_SEQ_DISCONT_1RANK       (ADC_CFGR_JDISCEN) /*!< ADC group injected sequencer discontinuous mode
+                                           enable with sequence interruption every rank */
 /**
   * @}
   */
@@ -1019,10 +1384,14 @@
 /** @defgroup ADC_LL_EC_INJ_SEQ_RANKS  ADC group injected - Sequencer ranks
   * @{
   */
-#define LL_ADC_INJ_RANK_1                  (ADC_JDR1_REGOFFSET | ADC_INJ_RANK_1_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 1 */
-#define LL_ADC_INJ_RANK_2                  (ADC_JDR2_REGOFFSET | ADC_INJ_RANK_2_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 2 */
-#define LL_ADC_INJ_RANK_3                  (ADC_JDR3_REGOFFSET | ADC_INJ_RANK_3_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 3 */
-#define LL_ADC_INJ_RANK_4                  (ADC_JDR4_REGOFFSET | ADC_INJ_RANK_4_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 4 */
+#define LL_ADC_INJ_RANK_1                  (ADC_JDR1_REGOFFSET \
+                                            | ADC_INJ_RANK_1_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 1 */
+#define LL_ADC_INJ_RANK_2                  (ADC_JDR2_REGOFFSET \
+                                            | ADC_INJ_RANK_2_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 2 */
+#define LL_ADC_INJ_RANK_3                  (ADC_JDR3_REGOFFSET \
+                                            | ADC_INJ_RANK_3_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 3 */
+#define LL_ADC_INJ_RANK_4                  (ADC_JDR4_REGOFFSET \
+                                            | ADC_INJ_RANK_4_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 4 */
 /**
   * @}
   */
@@ -1030,14 +1399,19 @@
 /** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME  Channel - Sampling time
   * @{
   */
-#define LL_ADC_SAMPLINGTIME_2CYCLES_5      (0x00000000UL)                                              /*!< Sampling time 2.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_6CYCLES_5      (                                        ADC_SMPR2_SMP10_0) /*!< Sampling time 6.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_12CYCLES_5     (                    ADC_SMPR2_SMP10_1                    ) /*!< Sampling time 12.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_24CYCLES_5     (                    ADC_SMPR2_SMP10_1 | ADC_SMPR2_SMP10_0) /*!< Sampling time 24.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_47CYCLES_5     (ADC_SMPR2_SMP10_2                                        ) /*!< Sampling time 47.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_92CYCLES_5     (ADC_SMPR2_SMP10_2                     | ADC_SMPR2_SMP10_0) /*!< Sampling time 92.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_247CYCLES_5    (ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_1                    ) /*!< Sampling time 247.5 ADC clock cycles */
-#define LL_ADC_SAMPLINGTIME_640CYCLES_5    (ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_1 | ADC_SMPR2_SMP10_0) /*!< Sampling time 640.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_2CYCLES_5      (0x00000000UL)       /*!< Sampling time 2.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_6CYCLES_5      (ADC_SMPR2_SMP10_0)  /*!< Sampling time 6.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_12CYCLES_5     (ADC_SMPR2_SMP10_1)  /*!< Sampling time 12.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_24CYCLES_5     (ADC_SMPR2_SMP10_1 \
+                                            | ADC_SMPR2_SMP10_0) /*!< Sampling time 24.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_47CYCLES_5     (ADC_SMPR2_SMP10_2)  /*!< Sampling time 47.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_92CYCLES_5     (ADC_SMPR2_SMP10_2 \
+                                            | ADC_SMPR2_SMP10_0) /*!< Sampling time 92.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_247CYCLES_5    (ADC_SMPR2_SMP10_2 \
+                                            | ADC_SMPR2_SMP10_1) /*!< Sampling time 247.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_640CYCLES_5    (ADC_SMPR2_SMP10_2 \
+                                            | ADC_SMPR2_SMP10_1 \
+                                            | ADC_SMPR2_SMP10_0) /*!< Sampling time 640.5 ADC clock cycles */
 /**
   * @}
   */
@@ -1045,9 +1419,13 @@
 /** @defgroup ADC_LL_EC_CHANNEL_SINGLE_DIFF_ENDING  Channel - Single or differential ending
   * @{
   */
-#define LL_ADC_SINGLE_ENDED                (                  ADC_CALFACT_CALFACT_S)         /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */
-#define LL_ADC_DIFFERENTIAL_ENDED          (ADC_CR_ADCALDIF | ADC_CALFACT_CALFACT_D)         /*!< ADC channel ending set to differential (literal also used to set calibration mode) */
-#define LL_ADC_BOTH_SINGLE_DIFF_ENDED      (LL_ADC_SINGLE_ENDED | LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending set to both single ended and differential (literal used only to set calibration factors) */
+#define LL_ADC_SINGLE_ENDED                (                  ADC_CALFACT_CALFACT_S)         /*!< ADC channel ending
+                                           set to single ended (literal also used to set calibration mode) */
+#define LL_ADC_DIFFERENTIAL_ENDED          (ADC_CR_ADCALDIF | ADC_CALFACT_CALFACT_D)         /*!< ADC channel ending
+                                           set to differential (literal also used to set calibration mode) */
+#define LL_ADC_BOTH_SINGLE_DIFF_ENDED      (LL_ADC_SINGLE_ENDED | LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending
+                                           set to both single ended and differential (literal used only to set
+                                           calibration factors) */
 /**
   * @}
   */
@@ -1055,9 +1433,12 @@
 /** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number
   * @{
   */
-#define LL_ADC_AWD1                        (ADC_AWD_CR1_CHANNEL_MASK  | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */
-#define LL_ADC_AWD2                        (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */
-#define LL_ADC_AWD3                        (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */
+#define LL_ADC_AWD1                        (ADC_AWD_CR1_CHANNEL_MASK \
+                                            | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */
+#define LL_ADC_AWD2                        (ADC_AWD_CR23_CHANNEL_MASK \
+                                            | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */
+#define LL_ADC_AWD3                        (ADC_AWD_CR23_CHANNEL_MASK \
+                                            | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */
 /**
   * @}
   */
@@ -1065,97 +1446,331 @@
 /** @defgroup ADC_LL_EC_AWD_CHANNELS  Analog watchdog - Monitored channels
   * @{
   */
-#define LL_ADC_AWD_DISABLE                 (0x00000000UL)                                                                                      /*!< ADC analog watchdog monitoring disabled */
-#define LL_ADC_AWD_ALL_CHANNELS_REG        (ADC_AWD_CR23_CHANNEL_MASK                                    | ADC_CFGR_AWD1EN                   ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */
-#define LL_ADC_AWD_ALL_CHANNELS_INJ        (ADC_AWD_CR23_CHANNEL_MASK                 | ADC_CFGR_JAWD1EN                                     ) /*!< ADC analog watchdog monitoring of all channels, converted by group injected only */
-#define LL_ADC_AWD_ALL_CHANNELS_REG_INJ    (ADC_AWD_CR23_CHANNEL_MASK                 | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN                   ) /*!< ADC analog watchdog monitoring of all channels, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_0_REG           ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_0_INJ           ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_0_REG_INJ       ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_1_REG           ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_1_INJ           ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_1_REG_INJ       ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_2_REG           ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_2_INJ           ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_2_REG_INJ       ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_3_REG           ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_3_INJ           ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_3_REG_INJ       ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_4_REG           ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_4_INJ           ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_4_REG_INJ       ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_5_REG           ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_5_INJ           ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_5_REG_INJ       ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_6_REG           ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_6_INJ           ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_6_REG_INJ       ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_7_REG           ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_7_INJ           ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_7_REG_INJ       ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_8_REG           ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_8_INJ           ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_8_REG_INJ       ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_9_REG           ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_9_INJ           ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_9_REG_INJ       ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_10_REG          ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_10_INJ          ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_10_REG_INJ      ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_11_REG          ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_11_INJ          ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_11_REG_INJ      ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_12_REG          ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_12_INJ          ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_12_REG_INJ      ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_13_REG          ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_13_INJ          ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_13_REG_INJ      ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_14_REG          ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_14_INJ          ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_14_REG_INJ      ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_15_REG          ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_15_INJ          ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_15_REG_INJ      ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_16_REG          ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_16_INJ          ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_16_REG_INJ      ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_17_REG          ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_17_INJ          ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_17_REG_INJ      ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by either group regular or injected */
-#define LL_ADC_AWD_CHANNEL_18_REG          ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */
-#define LL_ADC_AWD_CHANNEL_18_INJ          ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group injected only */
-#define LL_ADC_AWD_CHANNEL_18_REG_INJ      ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by either group regular or injected */
-#define LL_ADC_AWD_CH_VREFINT_REG          ((LL_ADC_CHANNEL_VREFINT       & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */
-#define LL_ADC_AWD_CH_VREFINT_INJ          ((LL_ADC_CHANNEL_VREFINT       & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group injected only */
-#define LL_ADC_AWD_CH_VREFINT_REG_INJ      ((LL_ADC_CHANNEL_VREFINT       & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by either group regular or injected */
-#define LL_ADC_AWD_CH_TEMPSENSOR_REG       ((LL_ADC_CHANNEL_TEMPSENSOR    & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */
-#define LL_ADC_AWD_CH_TEMPSENSOR_INJ       ((LL_ADC_CHANNEL_TEMPSENSOR    & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group injected only */
-#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ   ((LL_ADC_CHANNEL_TEMPSENSOR    & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by either group regular or injected */
-#define LL_ADC_AWD_CH_VBAT_REG             ((LL_ADC_CHANNEL_VBAT          & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */
-#define LL_ADC_AWD_CH_VBAT_INJ             ((LL_ADC_CHANNEL_VBAT          & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group injected only */
-#define LL_ADC_AWD_CH_VBAT_REG_INJ         ((LL_ADC_CHANNEL_VBAT          & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda */
+#define LL_ADC_AWD_DISABLE                 (0x00000000UL)                           /*!< ADC analog watchdog monitoring
+                                           disabled */
+#define LL_ADC_AWD_ALL_CHANNELS_REG        (ADC_AWD_CR23_CHANNEL_MASK \
+                                            | ADC_CFGR_AWD1EN)                       /*!< ADC analog watchdog monitoring
+                                           of all channels, converted by group regular only */
+#define LL_ADC_AWD_ALL_CHANNELS_INJ        (ADC_AWD_CR23_CHANNEL_MASK \
+                                            | ADC_CFGR_JAWD1EN)                      /*!< ADC analog watchdog monitoring
+                                           of all channels, converted by group injected only */
+#define LL_ADC_AWD_ALL_CHANNELS_REG_INJ    (ADC_AWD_CR23_CHANNEL_MASK \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN)    /*!< ADC analog watchdog monitoring
+                                           of all channels, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_0_REG           ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN0, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_0_INJ           ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN0, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_0_REG_INJ       ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN0, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_1_REG           ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN1, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_1_INJ           ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN1, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_1_REG_INJ       ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN1, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_2_REG           ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN2, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_2_INJ           ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN2, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_2_REG_INJ       ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN2, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_3_REG           ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN3, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_3_INJ           ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN3, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_3_REG_INJ       ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN3, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_4_REG           ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN4, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_4_INJ           ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN4, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_4_REG_INJ       ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN4, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_5_REG           ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN5, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_5_INJ           ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN5, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_5_REG_INJ       ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN5, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_6_REG           ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN6, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_6_INJ           ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN6, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_6_REG_INJ       ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN6, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_7_REG           ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN7, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_7_INJ           ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN7, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_7_REG_INJ       ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN7, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_8_REG           ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN8, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_8_INJ           ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN8, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_8_REG_INJ       ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN8, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_9_REG           ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN9, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_9_INJ           ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN9, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_9_REG_INJ       ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN9, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_10_REG          ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN10, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_10_INJ          ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN10, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_10_REG_INJ      ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK)\
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN10, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_11_REG          ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN11, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_11_INJ          ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN11, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_11_REG_INJ      ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN11, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_12_REG          ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN12, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_12_INJ          ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN12, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_12_REG_INJ      ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN12, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_13_REG          ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN13, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_13_INJ          ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN13, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_13_REG_INJ      ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN13, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_14_REG          ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN14, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_14_INJ          ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN14, converted by group only */
+#define LL_ADC_AWD_CHANNEL_14_REG_INJ      ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN14, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_15_REG          ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           monitoring of ADC channel ADCx_IN15, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_15_INJ          ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN15, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_15_REG_INJ      ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN15, converted by either group
+                                           regular or injected */
+#define LL_ADC_AWD_CHANNEL_16_REG          ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN16, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_16_INJ          ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN16, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_16_REG_INJ      ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN16, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_17_REG          ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN17, converted by group regular only */
+ #define LL_ADC_AWD_CHANNEL_17_INJ          ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN17, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_17_REG_INJ      ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN17, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_18_REG          ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN18, converted by group regular only */
+ #define LL_ADC_AWD_CHANNEL_18_INJ          ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN18, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_18_REG_INJ      ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC channel ADCx_IN18, converted by either group
+                                           regular or injected */
+#define LL_ADC_AWD_CH_VREFINT_REG          ((LL_ADC_CHANNEL_VREFINT       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to VrefInt: Internal
+                                           voltage reference, converted by group regular only */
+#define LL_ADC_AWD_CH_VREFINT_INJ          ((LL_ADC_CHANNEL_VREFINT       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to VrefInt: Internal
+                                           voltage reference, converted by group injected only */
+#define LL_ADC_AWD_CH_VREFINT_REG_INJ      ((LL_ADC_CHANNEL_VREFINT       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to VrefInt: Internal
+                                           voltage reference, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG       ((LL_ADC_CHANNEL_TEMPSENSOR    & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to internal temperature sensor,
+                                           converted by group regular only */
+#define LL_ADC_AWD_CH_TEMPSENSOR_INJ       ((LL_ADC_CHANNEL_TEMPSENSOR    & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to internal temperature sensor,
+                                           converted by group injected only */
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ   ((LL_ADC_CHANNEL_TEMPSENSOR    & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to internal temperature sensor,
+                                           converted by either group regular or injected */
+#define LL_ADC_AWD_CH_VBAT_REG             ((LL_ADC_CHANNEL_VBAT          & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to Vbat/3: Vbat
+                                           voltage through a divider ladder of factor 1/3 to have channel voltage
+                                           always below Vdda, converted by group regular only */
+#define LL_ADC_AWD_CH_VBAT_INJ             ((LL_ADC_CHANNEL_VBAT          & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to Vbat/3: Vbat
+                                           voltage through a divider ladder of factor 1/3 to have channel voltage
+                                           always below Vdda, converted by group injected only */
+#define LL_ADC_AWD_CH_VBAT_REG_INJ         ((LL_ADC_CHANNEL_VBAT          & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog
+                                           of ADC internal channel connected to Vbat/3: Vbat
+                                           voltage through a divider ladder of factor 1/3 to have channel voltage
+                                           always below Vdda */
 #if defined(ADC1) && !defined(ADC2)
-#define LL_ADC_AWD_CH_DAC1CH1_REG          ((LL_ADC_CHANNEL_DAC1CH1       & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC1, converted by group regular only */
-#define LL_ADC_AWD_CH_DAC1CH1_INJ          ((LL_ADC_CHANNEL_DAC1CH1       & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC1, converted by group injected only */
-#define LL_ADC_AWD_CH_DAC1CH1_REG_INJ      ((LL_ADC_CHANNEL_DAC1CH1       & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC1, converted by either group regular or injected */
-#define LL_ADC_AWD_CH_DAC1CH2_REG          ((LL_ADC_CHANNEL_DAC1CH2       & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC1, converted by group regular only */
-#define LL_ADC_AWD_CH_DAC1CH2_INJ          ((LL_ADC_CHANNEL_DAC1CH2       & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC1, converted by group injected only */
-#define LL_ADC_AWD_CH_DAC1CH2_REG_INJ      ((LL_ADC_CHANNEL_DAC1CH2       & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC1, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_DAC1CH1_REG          ((LL_ADC_CHANNEL_DAC1CH1       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC1, converted by group regular only */
+#define LL_ADC_AWD_CH_DAC1CH1_INJ          ((LL_ADC_CHANNEL_DAC1CH1       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC1, converted by group injected only */
+#define LL_ADC_AWD_CH_DAC1CH1_REG_INJ      ((LL_ADC_CHANNEL_DAC1CH1       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC1, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_DAC1CH2_REG          ((LL_ADC_CHANNEL_DAC1CH2       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC1, converted by group regular only */
+#define LL_ADC_AWD_CH_DAC1CH2_INJ          ((LL_ADC_CHANNEL_DAC1CH2       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC1, converted by group injected only */
+#define LL_ADC_AWD_CH_DAC1CH2_REG_INJ      ((LL_ADC_CHANNEL_DAC1CH2       & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC1, converted by either group regular or injected */
 #elif defined(ADC2)
-#define LL_ADC_AWD_CH_DAC1CH1_ADC2_REG     ((LL_ADC_CHANNEL_DAC1CH1_ADC2  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC2, converted by group regular only */
-#define LL_ADC_AWD_CH_DAC1CH1_ADC2_INJ     ((LL_ADC_CHANNEL_DAC1CH1_ADC2  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC2, converted by group injected only */
-#define LL_ADC_AWD_CH_DAC1CH1_ADC2_REG_INJ ((LL_ADC_CHANNEL_DAC1CH1_ADC2  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC2, converted by either group regular or injected */
-#define LL_ADC_AWD_CH_DAC1CH2_ADC2_REG     ((LL_ADC_CHANNEL_DAC1CH2_ADC2  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC2, converted by group regular only */
-#define LL_ADC_AWD_CH_DAC1CH2_ADC2_INJ     ((LL_ADC_CHANNEL_DAC1CH2_ADC2  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC2, converted by group injected only */
-#define LL_ADC_AWD_CH_DAC1CH2_ADC2_REG_INJ ((LL_ADC_CHANNEL_DAC1CH2_ADC2  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC2, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_DAC1CH1_ADC2_REG     ((LL_ADC_CHANNEL_DAC1CH1_ADC2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC2, converted by group regular only */
+#define LL_ADC_AWD_CH_DAC1CH1_ADC2_INJ     ((LL_ADC_CHANNEL_DAC1CH1_ADC2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC2, converted by group injected only */
+#define LL_ADC_AWD_CH_DAC1CH1_ADC2_REG_INJ ((LL_ADC_CHANNEL_DAC1CH1_ADC2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC2, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_DAC1CH2_ADC2_REG     ((LL_ADC_CHANNEL_DAC1CH2_ADC2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC2, converted by group regular only */
+#define LL_ADC_AWD_CH_DAC1CH2_ADC2_INJ     ((LL_ADC_CHANNEL_DAC1CH2_ADC2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC2, converted by group injected only */
+#define LL_ADC_AWD_CH_DAC1CH2_ADC2_REG_INJ ((LL_ADC_CHANNEL_DAC1CH2_ADC2  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC2, converted by either group regular or injected */
 #if defined(ADC3)
-#define LL_ADC_AWD_CH_DAC1CH1_ADC3_REG     ((LL_ADC_CHANNEL_DAC1CH1_ADC3  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC3, converted by group regular only */
-#define LL_ADC_AWD_CH_DAC1CH1_ADC3_INJ     ((LL_ADC_CHANNEL_DAC1CH1_ADC3  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC3, converted by group injected only */
-#define LL_ADC_AWD_CH_DAC1CH1_ADC3_REG_INJ ((LL_ADC_CHANNEL_DAC1CH1_ADC3  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 1, channel specific to ADC3, converted by either group regular or injected */
-#define LL_ADC_AWD_CH_DAC1CH2_ADC3_REG     ((LL_ADC_CHANNEL_DAC1CH2_ADC3  & ADC_CHANNEL_ID_MASK)                    | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC3, converted by group regular only */
-#define LL_ADC_AWD_CH_DAC1CH2_ADC3_INJ     ((LL_ADC_CHANNEL_DAC1CH2_ADC3  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN                   | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC3, converted by group injected only */
-#define LL_ADC_AWD_CH_DAC1CH2_ADC3_REG_INJ ((LL_ADC_CHANNEL_DAC1CH2_ADC3  & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to DAC1 channel 2, channel specific to ADC3, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_DAC1CH1_ADC3_REG     ((LL_ADC_CHANNEL_DAC1CH1_ADC3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC3, converted by group regular only */
+#define LL_ADC_AWD_CH_DAC1CH1_ADC3_INJ     ((LL_ADC_CHANNEL_DAC1CH1_ADC3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC3, converted by group injected only */
+#define LL_ADC_AWD_CH_DAC1CH1_ADC3_REG_INJ ((LL_ADC_CHANNEL_DAC1CH1_ADC3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 1,
+                                           channel specific to ADC3, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_DAC1CH2_ADC3_REG     ((LL_ADC_CHANNEL_DAC1CH2_ADC3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)    /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC3, converted by group regular only */
+#define LL_ADC_AWD_CH_DAC1CH2_ADC3_INJ     ((LL_ADC_CHANNEL_DAC1CH2_ADC3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL)   /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC3, converted by group injected only */
+#define LL_ADC_AWD_CH_DAC1CH2_ADC3_REG_INJ ((LL_ADC_CHANNEL_DAC1CH2_ADC3  & ADC_CHANNEL_ID_MASK) \
+                                            | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \
+                                            | ADC_CFGR_AWD1SGL)                      /*!< ADC analog watchdog monitoring
+                                           of ADC internal channel connected to DAC1 channel 2,
+                                           channel specific to ADC3, converted by either group regular or injected */
 #endif /* ADC3 */
 #endif /* ADC1 && !ADC2 */
 /**
@@ -1165,9 +1780,11 @@
 /** @defgroup ADC_LL_EC_AWD_THRESHOLDS  Analog watchdog - Thresholds
   * @{
   */
-#define LL_ADC_AWD_THRESHOLD_HIGH          (ADC_TR1_HT1              ) /*!< ADC analog watchdog threshold high */
-#define LL_ADC_AWD_THRESHOLD_LOW           (              ADC_TR1_LT1) /*!< ADC analog watchdog threshold low */
-#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW     (ADC_TR1_HT1 | ADC_TR1_LT1) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */
+#define LL_ADC_AWD_THRESHOLD_HIGH          (ADC_TR1_HT1)      /*!< ADC analog watchdog threshold high */
+#define LL_ADC_AWD_THRESHOLD_LOW           (ADC_TR1_LT1)      /*!< ADC analog watchdog threshold low */
+#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW     (ADC_TR1_HT1 \
+                                            | ADC_TR1_LT1)     /*!< ADC analog watchdog both thresholds high and low
+                                           concatenated into the same data */
 /**
   * @}
   */
@@ -1175,11 +1792,21 @@
 /** @defgroup ADC_LL_EC_OVS_SCOPE  Oversampling - Oversampling scope
   * @{
   */
-#define LL_ADC_OVS_DISABLE                 (0x00000000UL)                                        /*!< ADC oversampling disabled. */
-#define LL_ADC_OVS_GRP_REGULAR_CONTINUED   (                                    ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of ADC group regular. If group injected interrupts group regular: when ADC group injected is triggered, the oversampling on ADC group regular is temporary stopped and continued afterwards. */
-#define LL_ADC_OVS_GRP_REGULAR_RESUMED     (ADC_CFGR2_ROVSM |                   ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of ADC group regular. If group injected interrupts group regular: when ADC group injected is triggered, the oversampling on ADC group regular is resumed from start (oversampler buffer reset). */
-#define LL_ADC_OVS_GRP_INJECTED            (                  ADC_CFGR2_JOVSE                  ) /*!< ADC oversampling on conversions of ADC group injected. */
-#define LL_ADC_OVS_GRP_INJ_REG_RESUMED     (                  ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of both ADC groups regular and injected. If group injected interrupting group regular: when ADC group injected is triggered, the oversampling on ADC group regular is resumed from start (oversampler buffer reset). */
+#define LL_ADC_OVS_DISABLE                 (0x00000000UL)                      /*!< ADC oversampling disabled. */
+#define LL_ADC_OVS_GRP_REGULAR_CONTINUED   (ADC_CFGR2_ROVSE)                   /*!< ADC oversampling on conversions of
+                                           ADC group regular. If group injected interrupts group regular:
+                                           when ADC group injected is triggered, the oversampling on ADC group regular
+                                           is temporary stopped and continued afterwards. */
+#define LL_ADC_OVS_GRP_REGULAR_RESUMED     (ADC_CFGR2_ROVSM | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of
+                                           ADC group regular. If group injected interrupts group regular:
+                                           when ADC group injected is triggered, the oversampling on ADC group regular
+                                           is resumed from start (oversampler buffer reset). */
+#define LL_ADC_OVS_GRP_INJECTED            (ADC_CFGR2_JOVSE)                   /*!< ADC oversampling on conversions of
+                                           ADC group injected. */
+#define LL_ADC_OVS_GRP_INJ_REG_RESUMED     (ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of
+                                           both ADC groups regular and injected. If group injected interrupting group
+                                           regular: when ADC group injected is triggered, the oversampling on ADC group
+                                           regular is resumed from start (oversampler buffer reset). */
 /**
   * @}
   */
@@ -1187,8 +1814,10 @@
 /** @defgroup ADC_LL_EC_OVS_DISCONT_MODE  Oversampling - Discontinuous mode
   * @{
   */
-#define LL_ADC_OVS_REG_CONT                (0x00000000UL)         /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */
-#define LL_ADC_OVS_REG_DISCONT             (ADC_CFGR2_TROVS)      /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */
+#define LL_ADC_OVS_REG_CONT                (0x00000000UL)     /*!< ADC oversampling discontinuous mode: continuous mode
+(all conversions of oversampling ratio are done from 1 trigger) */
+#define LL_ADC_OVS_REG_DISCONT             (ADC_CFGR2_TROVS)  /*!< ADC oversampling discontinuous mode: discontinuous
+                                           mode (each conversion of oversampling ratio needs a trigger) */
 /**
   * @}
   */
@@ -1196,30 +1825,66 @@
 /** @defgroup ADC_LL_EC_OVS_RATIO  Oversampling - Ratio
   * @{
   */
-#define LL_ADC_OVS_RATIO_2                 (0x00000000UL)                                           /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_4                 (                                      ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_8                 (                   ADC_CFGR2_OVSR_1                   ) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_16                (                   ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_32                (ADC_CFGR2_OVSR_2                                      ) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_64                (ADC_CFGR2_OVSR_2                    | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_128               (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1                   ) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
-#define LL_ADC_OVS_RATIO_256               (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */
+#define LL_ADC_OVS_RATIO_2                 (0x00000000UL)                        /*!< ADC oversampling ratio of 2
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_4                 (ADC_CFGR2_OVSR_0)                    /*!< ADC oversampling ratio of 4
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_8                 (ADC_CFGR2_OVSR_1)                    /*!< ADC oversampling ratio of 8
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_16                (ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_32                (ADC_CFGR2_OVSR_2)                    /*!< ADC oversampling ratio of 32
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_64                (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_128               (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1) /*!< ADC oversampling ratio of 128
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
+#define LL_ADC_OVS_RATIO_256               (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 \
+                                            | ADC_CFGR2_OVSR_0)                   /*!< ADC oversampling ratio of 256
+                                           (sum of conversions data computed to result as oversampling conversion data
+                                           (before potential shift) */
 /**
   * @}
   */
 
-/** @defgroup ADC_LL_EC_OVS_SHIFT  Oversampling - Data shift
+/** @defgroup ADC_LL_EC_OVS_SHIFT  Oversampling - Data right shift
   * @{
   */
-#define LL_ADC_OVS_SHIFT_NONE              (0x00000000UL)                                                              /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_1           (                                                         ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_2           (                                      ADC_CFGR2_OVSS_1                   ) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_3           (                                      ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_4           (                   ADC_CFGR2_OVSS_2                                      ) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_5           (                   ADC_CFGR2_OVSS_2                    | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_6           (                   ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1                   ) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_7           (                   ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */
-#define LL_ADC_OVS_SHIFT_RIGHT_8           (ADC_CFGR2_OVSS_3                                                         ) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_NONE              (0x00000000UL)                        /*!< ADC oversampling no shift
+                                           (sum of the ADC conversions data is not divided to result as oversampling
+                                           conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_1           (ADC_CFGR2_OVSS_0)                    /*!< ADC oversampling right shift of 1
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 2
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_2           (ADC_CFGR2_OVSS_1)                    /*!< ADC oversampling right shift of 2
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 4
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_3           (ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 3
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 8
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_4           (ADC_CFGR2_OVSS_2)                    /*!< ADC oversampling right shift of 4
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 16
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_5           (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 5
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 32
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_6           (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1) /*!< ADC oversampling right shift of 6
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 64
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_7           (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 \
+                                            | ADC_CFGR2_OVSS_0)                   /*!< ADC oversampling right shift of 7
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 128
+                                           to result as oversampling conversion data) */
+#define LL_ADC_OVS_SHIFT_RIGHT_8           (ADC_CFGR2_OVSS_3)                    /*!< ADC oversampling right shift of 8
+                                           (sum of the ADC conversions data (after OVS ratio) is divided by 256
+                                           to result as oversampling conversion data) */
 /**
   * @}
   */
@@ -1228,14 +1893,23 @@
 /** @defgroup ADC_LL_EC_MULTI_MODE  Multimode - Mode
   * @{
   */
-#define LL_ADC_MULTI_INDEPENDENT           (0x00000000UL)                                                      /*!< ADC dual mode disabled (ADC independent mode) */
-#define LL_ADC_MULTI_DUAL_REG_SIMULT       (                 ADC_CCR_DUAL_2 | ADC_CCR_DUAL_1                 ) /*!< ADC dual mode enabled: group regular simultaneous */
-#define LL_ADC_MULTI_DUAL_REG_INTERL       (                 ADC_CCR_DUAL_2 | ADC_CCR_DUAL_1 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group regular interleaved */
-#define LL_ADC_MULTI_DUAL_INJ_SIMULT       (                 ADC_CCR_DUAL_2                  | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: group injected simultaneous */
-#define LL_ADC_MULTI_DUAL_INJ_ALTERN       (ADC_CCR_DUAL_3                                   | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */
-#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM  (                                                   ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */
-#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT  (                                  ADC_CCR_DUAL_1                 ) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */
-#define LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM  (                                  ADC_CCR_DUAL_1 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group regular interleaved + group injected simultaneous */
+#define LL_ADC_MULTI_INDEPENDENT           (0x00000000UL)                    /*!< ADC dual mode disabled (ADC
+                                           independent mode) */
+#define LL_ADC_MULTI_DUAL_REG_SIMULT       (ADC_CCR_DUAL_2 | ADC_CCR_DUAL_1) /*!< ADC dual mode enabled: group regular
+                                           simultaneous */
+#define LL_ADC_MULTI_DUAL_REG_INTERL       (ADC_CCR_DUAL_2 | ADC_CCR_DUAL_1 \
+                                            | ADC_CCR_DUAL_0)                  /*!< ADC dual mode enabled: Combined group
+                                           regular interleaved */
+#define LL_ADC_MULTI_DUAL_INJ_SIMULT       (ADC_CCR_DUAL_2 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: group injected
+                                           simultaneous */
+#define LL_ADC_MULTI_DUAL_INJ_ALTERN       (ADC_CCR_DUAL_3 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: group injected
+                                           alternate trigger. Works only with external triggers (not SW start) */
+#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM  (ADC_CCR_DUAL_0)                  /*!< ADC dual mode enabled: Combined group
+                                           regular simultaneous + group injected simultaneous */
+#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT  (ADC_CCR_DUAL_1)                  /*!< ADC dual mode enabled: Combined group
+                                           regular simultaneous + group injected alternate trigger */
+#define LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM  (ADC_CCR_DUAL_1 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group
+                                           regular interleaved + group injected simultaneous */
 /**
   * @}
   */
@@ -1243,11 +1917,34 @@
 /** @defgroup ADC_LL_EC_MULTI_DMA_TRANSFER  Multimode - DMA transfer
   * @{
   */
-#define LL_ADC_MULTI_REG_DMA_EACH_ADC        (0x00000000UL)                                     /*!< ADC multimode group regular conversions are transferred by DMA: each ADC uses its own DMA channel, with its individual DMA transfer settings */
-#define LL_ADC_MULTI_REG_DMA_LIMIT_RES12_10B (                 ADC_CCR_MDMA_1                 ) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for both ADC (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting for ADC resolution of 12 and 10 bits */
-#define LL_ADC_MULTI_REG_DMA_LIMIT_RES8_6B   (                 ADC_CCR_MDMA_1 | ADC_CCR_MDMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for both ADC (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting for ADC resolution of 8 and 6 bits */
-#define LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B (ADC_CCR_DMACFG | ADC_CCR_MDMA_1                 ) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for both ADC (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. Setting for ADC resolution of 12 and 10 bits */
-#define LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B   (ADC_CCR_DMACFG | ADC_CCR_MDMA_1 | ADC_CCR_MDMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for both ADC (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. Setting for ADC resolution of 8 and 6 bits */
+#define LL_ADC_MULTI_REG_DMA_EACH_ADC        (0x00000000UL)                    /*!< ADC multimode group regular
+                                             conversions are transferred by DMA: each ADC uses its own DMA channel,
+                                             with its individual DMA transfer settings */
+#define LL_ADC_MULTI_REG_DMA_LIMIT_RES12_10B (ADC_CCR_MDMA_1)                  /*!< ADC multimode group regular
+                                             conversions are transferred by DMA, one DMA channel for both ADC(DMA of
+                                             ADC master), in limited mode (one shot mode): DMA transfer requests
+                                             are stopped when number of DMA data transfers (number of ADC conversions)
+                                             is reached. This ADC mode is intended to be used with DMA mode
+                                             non-circular. Setting for ADC resolution of 12 and 10 bits */
+#define LL_ADC_MULTI_REG_DMA_LIMIT_RES8_6B   (ADC_CCR_MDMA_1 | ADC_CCR_MDMA_0) /*!< ADC multimode group regular
+                                             conversions are transferred by DMA, one DMA channel for both ADC(DMA of
+                                             ADC master), in limited mode (one shot mode): DMA transfer requests
+                                             are stopped when number of DMA data transfers (number of ADC conversions)
+                                             is reached. This ADC mode is intended to be used with DMA mode
+                                             non-circular. Setting for ADC resolution of 8 and 6 bits */
+#define LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B (ADC_CCR_DMACFG | ADC_CCR_MDMA_1) /*!< ADC multimode group regular
+                                             conversions are transferred by DMA, one DMA channel for both ADC(DMA of
+                                             ADC master), in unlimited mode: DMA transfer requests are unlimited,
+                                             whatever number of DMA data transferred (number of ADC conversions).
+                                             This ADC mode is intended to be used with DMA mode circular.
+                                             Setting for ADC resolution of 12 and 10 bits */
+#define LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B   (ADC_CCR_DMACFG | ADC_CCR_MDMA_1 \
+                                              | ADC_CCR_MDMA_0)                 /*!< ADC multimode group regular
+                                             conversions are transferred by DMA, one DMA channel for both ADC (DMA of
+                                             ADC master), in unlimited mode: DMA transfer requests are unlimited,
+                                             whatever number of DMA data transferred (number of ADC conversions).
+                                             This ADC mode is intended to be used with DMA mode circular.
+                                             Setting for ADC resolution of 8 and 6 bits */
 /**
   * @}
   */
@@ -1255,18 +1952,32 @@
 /** @defgroup ADC_LL_EC_MULTI_TWOSMP_DELAY  Multimode - Delay between two sampling phases
   * @{
   */
-#define LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE   (0x00000000UL)                                                          /*!< ADC multimode delay between two sampling phases: 1 ADC clock cycle */
-#define LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES  (                                                      ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 2 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES  (                                    ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 3 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES  (                                    ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 4 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES  (                  ADC_CCR_DELAY_2                                    ) /*!< ADC multimode delay between two sampling phases: 5 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES  (                  ADC_CCR_DELAY_2                   | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 6 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES  (                  ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 7 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES  (                  ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 8 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES  (ADC_CCR_DELAY_3                                                      ) /*!< ADC multimode delay between two sampling phases: 9 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES (ADC_CCR_DELAY_3                                     | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 10 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES (ADC_CCR_DELAY_3                   | ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 11 ADC clock cycles */
-#define LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES (ADC_CCR_DELAY_3                   | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 12 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE   (0x00000000UL)                      /*!< ADC multimode delay between two
+                                           sampling phases: 1 ADC clock cycle */
+#define LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES  (ADC_CCR_DELAY_0)                   /*!< ADC multimode delay between two
+                                           sampling phases: 2 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES  (ADC_CCR_DELAY_1)                   /*!< ADC multimode delay between two
+                                           sampling phases: 3 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES  (ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two
+                                           sampling phases: 4 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES  (ADC_CCR_DELAY_2)                   /*!< ADC multimode delay between two
+                                           sampling phases: 5 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES  (ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two
+                                           sampling phases: 6 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES  (ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1) /*!< ADC multimode delay between two
+                                           sampling phases: 7 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES  (ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 \
+                                            | ADC_CCR_DELAY_0)                  /*!< ADC multimode delay between two
+                                           sampling phases: 8 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES  (ADC_CCR_DELAY_3)                   /*!< ADC multimode delay between two
+                                           sampling phases: 9 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two
+                                           sampling phases: 10 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1) /*!< ADC multimode delay between two
+                                           sampling phases: 11 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 \
+                                            | ADC_CCR_DELAY_0)                  /*!< ADC multimode delay between two
+                                           sampling phases: 12 ADC clock cycles */
 /**
   * @}
   */
@@ -1274,9 +1985,13 @@
 /** @defgroup ADC_LL_EC_MULTI_MASTER_SLAVE  Multimode - ADC master or slave
   * @{
   */
-#define LL_ADC_MULTI_MASTER                (                    ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC instances: ADC master */
-#define LL_ADC_MULTI_SLAVE                 (ADC_CDR_RDATA_SLV                    ) /*!< In multimode, selection among several ADC instances: ADC slave */
-#define LL_ADC_MULTI_MASTER_SLAVE          (ADC_CDR_RDATA_SLV | ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC instances: both ADC master and ADC slave */
+#define LL_ADC_MULTI_MASTER                (ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC
+                                           instances: ADC master */
+#define LL_ADC_MULTI_SLAVE                 (ADC_CDR_RDATA_SLV) /*!< In multimode, selection among several ADC
+                                           instances: ADC slave */
+#define LL_ADC_MULTI_MASTER_SLAVE          (ADC_CDR_RDATA_SLV \
+                                            | ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC
+                                           instances: both ADC master and ADC slave */
 /**
   * @}
   */
@@ -1302,20 +2017,31 @@
 #define LL_ADC_INJ_TRIG_EXT_TIM3_CC4       (LL_ADC_INJ_TRIG_EXT_TIM3_CH4)
 #define LL_ADC_INJ_TRIG_EXT_TIM8_CC4       (LL_ADC_INJ_TRIG_EXT_TIM8_CH4)
 
-#define LL_ADC_OVS_DATA_SHIFT_NONE        (LL_ADC_OVS_SHIFT_NONE)
-#define LL_ADC_OVS_DATA_SHIFT_1           (LL_ADC_OVS_SHIFT_RIGHT_1)
-#define LL_ADC_OVS_DATA_SHIFT_2           (LL_ADC_OVS_SHIFT_RIGHT_2)
-#define LL_ADC_OVS_DATA_SHIFT_3           (LL_ADC_OVS_SHIFT_RIGHT_3)
-#define LL_ADC_OVS_DATA_SHIFT_4           (LL_ADC_OVS_SHIFT_RIGHT_4)
-#define LL_ADC_OVS_DATA_SHIFT_5           (LL_ADC_OVS_SHIFT_RIGHT_5)
-#define LL_ADC_OVS_DATA_SHIFT_6           (LL_ADC_OVS_SHIFT_RIGHT_6)
-#define LL_ADC_OVS_DATA_SHIFT_7           (LL_ADC_OVS_SHIFT_RIGHT_7)
-#define LL_ADC_OVS_DATA_SHIFT_8           (LL_ADC_OVS_SHIFT_RIGHT_8)
+#define LL_ADC_OVS_DATA_SHIFT_NONE         (LL_ADC_OVS_SHIFT_NONE)
+#define LL_ADC_OVS_DATA_SHIFT_1            (LL_ADC_OVS_SHIFT_RIGHT_1)
+#define LL_ADC_OVS_DATA_SHIFT_2            (LL_ADC_OVS_SHIFT_RIGHT_2)
+#define LL_ADC_OVS_DATA_SHIFT_3            (LL_ADC_OVS_SHIFT_RIGHT_3)
+#define LL_ADC_OVS_DATA_SHIFT_4            (LL_ADC_OVS_SHIFT_RIGHT_4)
+#define LL_ADC_OVS_DATA_SHIFT_5            (LL_ADC_OVS_SHIFT_RIGHT_5)
+#define LL_ADC_OVS_DATA_SHIFT_6            (LL_ADC_OVS_SHIFT_RIGHT_6)
+#define LL_ADC_OVS_DATA_SHIFT_7            (LL_ADC_OVS_SHIFT_RIGHT_7)
+#define LL_ADC_OVS_DATA_SHIFT_8            (LL_ADC_OVS_SHIFT_RIGHT_8)
 
 /**
   * @}
   */
 
+/** @defgroup ADC_LL_EC_HELPER_MACRO  Definitions of constants used by helper macro
+  * @{
+  */
+#define LL_ADC_TEMPERATURE_CALC_ERROR      ((int16_t)0x7FFF)  /* Temperature calculation error using helper macro
+                                                                 @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on
+                                                                 calibration parameters. This value is coded on 16 bits
+                                                                 (to fit on signed word or double word) and corresponds
+                                                                 to an inconsistent temperature value. */
+/**
+  * @}
+  */
 
 /** @defgroup ADC_LL_EC_HW_DELAYS  Definitions of ADC hardware constraints delays
   * @note   Only ADC peripheral HW delays are defined in ADC LL driver driver,
@@ -1347,20 +2073,24 @@
 /* Delay set to maximum value (refer to device datasheet,                     */
 /* parameter "tADCVREG_STUP").                                                */
 /* Unit: us                                                                   */
-#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL)  /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */
+#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL)           /*!< Delay for ADC stabilization time (ADC voltage
+                                                              regulator start-up time) */
 
 /* Delay for internal voltage reference stabilization time.                   */
 /* Delay set to maximum value (refer to device datasheet,                     */
 /* parameter "tstart_vrefint").                                               */
 /* Unit: us                                                                   */
-#define LL_ADC_DELAY_VREFINT_STAB_US           ( 12UL)  /*!< Delay for internal voltage reference stabilization time */
+#define LL_ADC_DELAY_VREFINT_STAB_US           ( 12UL)        /*!< Delay for internal voltage reference stabilization
+                                                                   time */
 
 /* Delay for temperature sensor stabilization time.                           */
 /* Literal set to maximum value (refer to device datasheet,                   */
 /* parameter "tSTART").                                                       */
 /* Unit: us                                                                   */
-#define LL_ADC_DELAY_TEMPSENSOR_STAB_US        (120UL)  /*!< Delay for temperature sensor stabilization time */
-#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL)  /*!< Delay for temperature sensor buffer stabilization time (starting from ADC enable, refer to @ref LL_ADC_Enable()) */
+#define LL_ADC_DELAY_TEMPSENSOR_STAB_US        (120UL)        /*!< Delay for temperature sensor stabilization time */
+#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL)        /*!< Delay for temperature sensor buffer stabilization
+                                                                   time (starting from ADC enable, refer to
+                                                                   @ref LL_ADC_Enable()) */
 
 /* Delay required between ADC end of calibration and ADC enable.              */
 /* Note: On this STM32 series, a minimum number of ADC clock cycles           */
@@ -1369,7 +2099,8 @@
 /*       equivalent number of CPU cycles, by taking into account              */
 /*       ratio of CPU clock versus ADC clock prescalers.                      */
 /* Unit: ADC clock cycles.                                                    */
-#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES   (  4UL)  /*!< Delay required between ADC end of calibration and ADC enable */
+#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES   (  4UL)        /*!< Delay required between ADC end of calibration
+                                                                   and ADC enable */
 
 /**
   * @}
@@ -1517,7 +2248,8 @@
   *         (5) On STM32L4, parameter available on devices with only 1 ADC instance.\n
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
-  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n
+  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to
+  *             4.21 Ms/s)).\n
   *         (1, 2, 3, 4) For ADC channel read back from ADC register,
   *                      comparison with internal channel parameter to be done
   *                      using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
@@ -1526,13 +2258,13 @@
   (((__DECIMAL_NB__) <= 9UL) ?                                                                          \
    (                                                                                                    \
        ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)                             |          \
-       (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__))                                             |          \
+       (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__))                                              |          \
        (ADC_SMPR1_REGOFFSET | (((3UL * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS))           \
    )                                                                                                    \
    :                                                                                                    \
    (                                                                                                    \
        ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)                                      | \
-       (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__))                                                      | \
+       (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__))                                                       | \
        (ADC_SMPR2_REGOFFSET | (((3UL * ((__DECIMAL_NB__) - 10UL))) << ADC_CHANNEL_SMPx_BITOFFSET_POS))  \
    )                                                                                                    \
   )
@@ -1592,7 +2324,8 @@
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
   *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).
-  * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin).
+  * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel
+                      connected to a GPIO pin).
   *         Value "1" if the channel corresponds to a parameter definition of a ADC internal channel.
   */
 #define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__)                              \
@@ -1809,7 +2542,8 @@
   *         (5) On STM32L4, parameter available on devices with only 1 ADC instance.\n
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
-  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n
+  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to
+  *             4.21 Ms/s)).\n
   *         (1, 2, 3, 4) For ADC channel read back from ADC register,
   *                      comparison with internal channel parameter to be done
   *                      using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
@@ -1982,8 +2716,9 @@
   * @param  __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
   * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
   */
-#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__)       \
-  (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) & LL_ADC_AWD_THRESHOLD_LOW)
+#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__)                            \
+  (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) \
+   & LL_ADC_AWD_THRESHOLD_LOW)
 
 /**
   * @brief  Helper macro to set the ADC calibration value with both single ended
@@ -2242,19 +2977,24 @@
   *         @arg @ref LL_ADC_RESOLUTION_8B
   *         @arg @ref LL_ADC_RESOLUTION_6B
   * @retval Temperature (unit: degree Celsius)
+  *         In case or error, value LL_ADC_TEMPERATURE_CALC_ERROR is returned (inconsistent temperature value)
   */
 #define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\
                                   __TEMPSENSOR_ADC_DATA__,\
-                                  __ADC_RESOLUTION__)                            \
-(((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__),     \
-                                                  (__ADC_RESOLUTION__),          \
-                                                  LL_ADC_RESOLUTION_12B)         \
-                 * (__VREFANALOG_VOLTAGE__))                                     \
-                / TEMPSENSOR_CAL_VREFANALOG)                                     \
-      - (int32_t) *TEMPSENSOR_CAL1_ADDR)                                         \
-   ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP)                    \
-  ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \
- ) + TEMPSENSOR_CAL1_TEMP                                                        \
+                                  __ADC_RESOLUTION__)\
+((((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) != 0) ?       \
+ (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__),     \
+                                                   (__ADC_RESOLUTION__),          \
+                                                   LL_ADC_RESOLUTION_12B)         \
+                  * (__VREFANALOG_VOLTAGE__))                                     \
+                 / TEMPSENSOR_CAL_VREFANALOG)                                     \
+       - (int32_t) *TEMPSENSOR_CAL1_ADDR)                                         \
+    ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP)                    \
+   ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \
+  ) + TEMPSENSOR_CAL1_TEMP                                                        \
+ )                                                                                \
+ :                                                                                \
+ ((int32_t)LL_ADC_TEMPERATURE_CALC_ERROR)                                         \
 )
 
 /**
@@ -2286,12 +3026,15 @@
   * @note   ADC measurement data must correspond to a resolution of 12 bits
   *         (full scale digital value 4095). If not the case, the data must be
   *         preliminarily rescaled to an equivalent resolution of 12 bits.
-  * @param  __TEMPSENSOR_TYP_AVGSLOPE__   Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius).
+  * @param  __TEMPSENSOR_TYP_AVGSLOPE__   Device datasheet data: Temperature sensor slope typical value
+  *                                       (unit: uV/DegCelsius).
   *                                       On STM32L4, refer to device datasheet parameter "Avg_Slope".
-  * @param  __TEMPSENSOR_TYP_CALX_V__     Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV).
-  *                                       On STM32L4, refer to device datasheet parameter "V30" (corresponding to TS_CAL1).
-  * @param  __TEMPSENSOR_CALX_TEMP__      Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV)
-  * @param  __VREFANALOG_VOLTAGE__        Analog voltage reference (Vref+) voltage (unit: mV)
+  * @param  __TEMPSENSOR_TYP_CALX_V__     Device datasheet data: Temperature sensor voltage typical value
+  *                                       (at temperature and Vref+ defined in parameters below) (unit: mV).
+  *                                       On STM32L4, refer to datasheet parameter "V30" (corresponding to TS_CAL1).
+  * @param  __TEMPSENSOR_CALX_TEMP__      Device datasheet data: Temperature at which temperature sensor voltage
+  *                                       (see parameter above) is corresponding (unit: mV)
+  * @param  __VREFANALOG_VOLTAGE__        Analog voltage reference (Vref+) value (unit: mV)
   * @param  __TEMPSENSOR_ADC_DATA__       ADC conversion data of internal temperature sensor (unit: digital value).
   * @param  __ADC_RESOLUTION__            ADC resolution at which internal temperature sensor voltage has been measured.
   *         This parameter can be one of the following values:
@@ -2370,7 +3113,7 @@
   * @retval ADC register address
   */
 #if defined(ADC_MULTIMODE_SUPPORT)
-__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register)
+__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(const ADC_TypeDef *ADCx, uint32_t Register)
 {
   uint32_t data_reg_addr;
 
@@ -2388,7 +3131,7 @@
   return data_reg_addr;
 }
 #else
-__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register)
+__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(const ADC_TypeDef *ADCx, uint32_t Register)
 {
   /* Prevent unused argument(s) compilation warning */
   (void)(Register);
@@ -2402,7 +3145,8 @@
   * @}
   */
 
-/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances
+/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several
+  *           ADC instances
   * @{
   */
 
@@ -2468,7 +3212,7 @@
   *         @arg @ref LL_ADC_CLOCK_ASYNC_DIV128
   *         @arg @ref LL_ADC_CLOCK_ASYNC_DIV256
   */
-__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_CKMODE | ADC_CCR_PRESC));
 }
@@ -2487,7 +3231,7 @@
   *         temperature sensor stabilization time.
   *         Refer to device datasheet.
   *         Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US.
-  *         Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, 
+  *         Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US,
   *         @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US.
   * @note   ADC internal channel sampling time constraint:
   *         For ADC conversion of internal channels,
@@ -2523,7 +3267,7 @@
   *         temperature sensor stabilization time.
   *         Refer to device datasheet.
   *         Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US.
-  *         Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, 
+  *         Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US,
   *         @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US.
   * @note   ADC internal channel sampling time constraint:
   *         For ADC conversion of internal channels,
@@ -2587,7 +3331,7 @@
   *         @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR
   *         @arg @ref LL_ADC_PATH_INTERNAL_VBAT
   */
-__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN));
 }
@@ -2635,7 +3379,9 @@
 {
   MODIFY_REG(ADCx->CALFACT,
              SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK,
-             CalibrationFactor << (((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) >> ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4) & ~(SingleDiff & ADC_CALFACT_CALFACT_S)));
+             CalibrationFactor << (((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK)
+                                    >> ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4)
+                                   & ~(SingleDiff & ADC_CALFACT_CALFACT_S)));
 }
 
 /**
@@ -2654,15 +3400,16 @@
   *         @arg @ref LL_ADC_DIFFERENTIAL_ENDED
   * @retval Value between Min_Data=0x00 and Max_Data=0x7F
   */
-__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t SingleDiff)
+__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(const ADC_TypeDef *ADCx, uint32_t SingleDiff)
 {
   /* Retrieve bits with position in register depending on parameter           */
   /* "SingleDiff".                                                            */
   /* Parameter used with mask "ADC_SINGLEDIFF_CALIB_FACTOR_MASK" because      */
   /* containing other bits reserved for other purpose.                        */
   return (uint32_t)(READ_BIT(ADCx->CALFACT,
-                             (SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK)) >> ((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) >>
-                                                                                  ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4));
+                             (SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK))
+                    >> ((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) >>
+                        ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4));
 }
 
 /**
@@ -2699,7 +3446,7 @@
   *         @arg @ref LL_ADC_RESOLUTION_8B
   *         @arg @ref LL_ADC_RESOLUTION_6B
   */
-__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetResolution(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_RES));
 }
@@ -2734,7 +3481,7 @@
   *         @arg @ref LL_ADC_DATA_ALIGN_RIGHT
   *         @arg @ref LL_ADC_DATA_ALIGN_LEFT
   */
-__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_ALIGN));
 }
@@ -2767,12 +3514,6 @@
   *             conversion  to ensure that conversion is completed and
   *             retrieve ADC conversion data. This will trig another
   *             ADC conversion start.
-  *         - ADC low power mode "auto power-off" (feature available on
-  *           this device if parameter LL_ADC_LP_AUTOPOWEROFF is available):
-  *           the ADC automatically powers-off after a conversion and
-  *           automatically wakes up when a new conversion is triggered
-  *           (with startup time between trigger and start of sampling).
-  *           This feature can be combined with low power mode "auto wait".
   * @note   With ADC low power mode "auto wait", the ADC conversion data read
   *         is corresponding to previous ADC conversion start, independently
   *         of delay during which ADC was idle.
@@ -2823,12 +3564,6 @@
   *             conversion  to ensure that conversion is completed and
   *             retrieve ADC conversion data. This will trig another
   *             ADC conversion start.
-  *         - ADC low power mode "auto power-off" (feature available on
-  *           this device if parameter LL_ADC_LP_AUTOPOWEROFF is available):
-  *           the ADC automatically powers-off after a conversion and
-  *           automatically wakes up when a new conversion is triggered
-  *           (with startup time between trigger and start of sampling).
-  *           This feature can be combined with low power mode "auto wait".
   * @note   With ADC low power mode "auto wait", the ADC conversion data read
   *         is corresponding to previous ADC conversion start, independently
   *         of delay during which ADC was idle.
@@ -2841,13 +3576,13 @@
   *         @arg @ref LL_ADC_LP_MODE_NONE
   *         @arg @ref LL_ADC_LP_AUTOWAIT
   */
-__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_AUTDLY));
 }
 
 /**
-  * @brief  Set ADC selected offset number 1, 2, 3 or 4.
+  * @brief  Set ADC selected offset instance 1, 2, 3 or 4.
   * @note   This function set the 2 items of offset configuration:
   *         - ADC channel to which the offset programmed will be applied
   *           (independently of channel mapped on ADC group regular
@@ -2936,7 +3671,7 @@
 }
 
 /**
-  * @brief  Get for the ADC selected offset number 1, 2, 3 or 4:
+  * @brief  Get for the ADC selected offset instance 1, 2, 3 or 4:
   *         Channel to which the offset programmed will be applied
   *         (independently of channel mapped on ADC group regular
   *         or group injected)
@@ -3000,12 +3735,13 @@
   *         (5) On STM32L4, parameter available on devices with only 1 ADC instance.\n
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
-  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n
+  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to
+  *             4.21 Ms/s)).\n
   *         (1, 2, 3, 4) For ADC channel read back from ADC register,
   *                      comparison with internal channel parameter to be done
   *                      using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOffsetChannel(ADC_TypeDef *ADCx, uint32_t Offsety)
+__STATIC_INLINE uint32_t LL_ADC_GetOffsetChannel(const ADC_TypeDef *ADCx, uint32_t Offsety)
 {
   const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety);
 
@@ -3013,7 +3749,7 @@
 }
 
 /**
-  * @brief  Get for the ADC selected offset number 1, 2, 3 or 4:
+  * @brief  Get for the ADC selected offset instance 1, 2, 3 or 4:
   *         Offset level (offset to be subtracted from the raw
   *         converted data).
   * @note   Caution: Offset format is dependent to ADC resolution:
@@ -3031,7 +3767,7 @@
   *         @arg @ref LL_ADC_OFFSET_4
   * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOffsetLevel(ADC_TypeDef *ADCx, uint32_t Offsety)
+__STATIC_INLINE uint32_t LL_ADC_GetOffsetLevel(const ADC_TypeDef *ADCx, uint32_t Offsety)
 {
   const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety);
 
@@ -3039,7 +3775,7 @@
 }
 
 /**
-  * @brief  Set for the ADC selected offset number 1, 2, 3 or 4:
+  * @brief  Set for the ADC selected offset instance 1, 2, 3 or 4:
   *         force offset state disable or enable
   *         without modifying offset channel or offset value.
   * @note   This function should be needed only in case of offset to be
@@ -3074,7 +3810,7 @@
 }
 
 /**
-  * @brief  Get for the ADC selected offset number 1, 2, 3 or 4:
+  * @brief  Get for the ADC selected offset instance 1, 2, 3 or 4:
   *         offset state disabled or enabled.
   * @rmtoll OFR1     OFFSET1_EN     LL_ADC_GetOffsetState\n
   *         OFR2     OFFSET2_EN     LL_ADC_GetOffsetState\n
@@ -3090,7 +3826,7 @@
   *         @arg @ref LL_ADC_OFFSET_DISABLE
   *         @arg @ref LL_ADC_OFFSET_ENABLE
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOffsetState(ADC_TypeDef *ADCx, uint32_t Offsety)
+__STATIC_INLINE uint32_t LL_ADC_GetOffsetState(const ADC_TypeDef *ADCx, uint32_t Offsety)
 {
   const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety);
 
@@ -3126,7 +3862,7 @@
   *         @arg @ref LL_ADC_SAMPLINGTIME_COMMON_DEFAULT
   *         @arg @ref LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5
   */
-__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonConfig(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonConfig(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->SMPR1, ADC_SMPR1_SMPPLUS));
 }
@@ -3147,7 +3883,7 @@
   * @note   On this STM32 series, setting trigger source to external trigger
   *         also set trigger polarity to rising edge
   *         (default setting for compatibility with some ADC on other
-  *         STM32 families having this setting set by HW default value).
+  *         STM32 series having this setting set by HW default value).
   *         In case of need to modify trigger edge, use
   *         function @ref LL_ADC_REG_SetTriggerEdge().
   * @note   Availability of parameters of trigger sources from timer
@@ -3218,19 +3954,19 @@
   *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO
   *         @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(const ADC_TypeDef *ADCx)
 {
-  __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR, ADC_CFGR_EXTSEL | ADC_CFGR_EXTEN);
+  __IO uint32_t trigger_source = READ_BIT(ADCx->CFGR, ADC_CFGR_EXTSEL | ADC_CFGR_EXTEN);
 
   /* Value for shift of {0; 4; 8; 12} depending on value of bitfield          */
   /* corresponding to ADC_CFGR_EXTEN {0; 1; 2; 3}.                            */
-  uint32_t ShiftExten = ((TriggerSource & ADC_CFGR_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL));
+  uint32_t shift_exten = ((trigger_source & ADC_CFGR_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL));
 
   /* Set bitfield corresponding to ADC_CFGR_EXTEN and ADC_CFGR_EXTSEL         */
   /* to match with triggers literals definition.                              */
-  return ((TriggerSource
-           & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR_EXTSEL)
-          | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR_EXTEN)
+  return ((trigger_source
+           & (ADC_REG_TRIG_SOURCE_MASK >> shift_exten) & ADC_CFGR_EXTSEL)
+          | ((ADC_REG_TRIG_EDGE_MASK >> shift_exten) & ADC_CFGR_EXTEN)
          );
 }
 
@@ -3245,7 +3981,7 @@
   * @retval Value "0" if trigger source external trigger
   *         Value "1" if trigger source SW start.
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CFGR, ADC_CFGR_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTEN)) ? 1UL : 0UL);
 }
@@ -3280,7 +4016,7 @@
   *         @arg @ref LL_ADC_REG_TRIG_EXT_FALLING
   *         @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_EXTEN));
 }
@@ -3393,7 +4129,7 @@
   *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS
   *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->SQR1, ADC_SQR1_L));
 }
@@ -3448,7 +4184,7 @@
   *         @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS
   *         @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM));
 }
@@ -3553,11 +4289,13 @@
   /* in register and register position depending on parameter "Rank".         */
   /* Parameters "Rank" and "Channel" are used with masks because containing   */
   /* other bits reserved for other purpose.                                   */
-  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS));
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1,
+                                             ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS));
 
   MODIFY_REG(*preg,
              ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK),
-             ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_REG_RANK_ID_SQRX_MASK));
+             ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+             << (Rank & ADC_REG_RANK_ID_SQRX_MASK));
 }
 
 /**
@@ -3651,14 +4389,16 @@
   *         (5) On STM32L4, parameter available on devices with only 1 ADC instance.\n
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
-  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n
+  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to
+  *             4.21 Ms/s)).\n
   *         (1, 2, 3, 4) For ADC channel read back from ADC register,
   *                      comparison with internal channel parameter to be done
   *                      using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1,
+                                                   ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS));
 
   return (uint32_t)((READ_BIT(*preg,
                               ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK))
@@ -3702,7 +4442,7 @@
   *         @arg @ref LL_ADC_REG_CONV_SINGLE
   *         @arg @ref LL_ADC_REG_CONV_CONTINUOUS
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_CONT));
 }
@@ -3777,7 +4517,7 @@
   *         @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED
   *         @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DMAEN | ADC_CFGR_DMACFG));
 }
@@ -3813,7 +4553,7 @@
   *         @arg @ref LL_ADC_REG_DFSDM_TRANSFER_NONE
   *         @arg @ref LL_ADC_REG_DFSDM_TRANSFER_ENABLE
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetDFSDMTransfer(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetDFSDMTransfer(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DFSDMCFG));
 }
@@ -3853,7 +4593,7 @@
   *         @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED
   *         @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_OVRMOD));
 }
@@ -3873,7 +4613,7 @@
   * @note   On this STM32 series, setting trigger source to external trigger
   *         also set trigger polarity to rising edge
   *         (default setting for compatibility with some ADC on other
-  *         STM32 families having this setting set by HW default value).
+  *         STM32 series having this setting set by HW default value).
   *         In case of need to modify trigger edge, use
   *         function @ref LL_ADC_INJ_SetTriggerEdge().
   * @note   Availability of parameters of trigger sources from timer
@@ -3944,19 +4684,19 @@
   *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM15_TRGO
   *         @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(const ADC_TypeDef *ADCx)
 {
-  __IO uint32_t TriggerSource = READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN);
+  __IO uint32_t trigger_source = READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN);
 
   /* Value for shift of {0; 4; 8; 12} depending on value of bitfield          */
   /* corresponding to ADC_JSQR_JEXTEN {0; 1; 2; 3}.                           */
-  uint32_t ShiftJexten = ((TriggerSource & ADC_JSQR_JEXTEN) >> (ADC_INJ_TRIG_EXTEN_BITOFFSET_POS - 2UL));
+  uint32_t shift_jexten = ((trigger_source & ADC_JSQR_JEXTEN) >> (ADC_INJ_TRIG_EXTEN_BITOFFSET_POS - 2UL));
 
   /* Set bitfield corresponding to ADC_JSQR_JEXTEN and ADC_JSQR_JEXTSEL       */
   /* to match with triggers literals definition.                              */
-  return ((TriggerSource
-           & (ADC_INJ_TRIG_SOURCE_MASK >> ShiftJexten) & ADC_JSQR_JEXTSEL)
-          | ((ADC_INJ_TRIG_EDGE_MASK >> ShiftJexten) & ADC_JSQR_JEXTEN)
+  return ((trigger_source
+           & (ADC_INJ_TRIG_SOURCE_MASK >> shift_jexten) & ADC_JSQR_JEXTSEL)
+          | ((ADC_INJ_TRIG_EDGE_MASK >> shift_jexten) & ADC_JSQR_JEXTEN)
          );
 }
 
@@ -3971,7 +4711,7 @@
   * @retval Value "0" if trigger source external trigger
   *         Value "1" if trigger source SW start.
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_IsTriggerSourceSWStart(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_IsTriggerSourceSWStart(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTEN) == (LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTEN)) ? 1UL : 0UL);
 }
@@ -4006,7 +4746,7 @@
   *         @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING
   *         @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTEN));
 }
@@ -4053,7 +4793,7 @@
   *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS
   *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerLength(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerLength(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->JSQR, ADC_JSQR_JL));
 }
@@ -4086,7 +4826,7 @@
   *         @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE
   *         @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_JDISCEN));
 }
@@ -4163,8 +4903,10 @@
   /* Parameters "Rank" and "Channel" are used with masks because containing   */
   /* other bits reserved for other purpose.                                   */
   MODIFY_REG(ADCx->JSQR,
-             (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_INJ_RANK_ID_JSQR_MASK),
-             ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_INJ_RANK_ID_JSQR_MASK));
+             (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+             << (Rank & ADC_INJ_RANK_ID_JSQR_MASK),
+             ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+             << (Rank & ADC_INJ_RANK_ID_JSQR_MASK));
 }
 
 /**
@@ -4230,15 +4972,17 @@
   *         (5) On STM32L4, parameter available on devices with only 1 ADC instance.\n
   *         (6) On STM32L4, parameter available on devices with several ADC instances.\n
   *         (7) On STM32L4, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)).
-  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n
+  *             Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to
+  *             4.21 Ms/s)).\n
   *         (1, 2, 3, 4) For ADC channel read back from ADC register,
   *                      comparison with internal channel parameter to be done
   *                      using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
   return (uint32_t)((READ_BIT(ADCx->JSQR,
-                              (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_INJ_RANK_ID_JSQR_MASK))
+                              (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+                              << (Rank & ADC_INJ_RANK_ID_JSQR_MASK))
                      >> (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS
                    );
 }
@@ -4287,7 +5031,7 @@
   *         @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT
   *         @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetTrigAuto(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetTrigAuto(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_JAUTO));
 }
@@ -4348,7 +5092,7 @@
   *         @arg @ref LL_ADC_INJ_QUEUE_2CONTEXTS_LAST_ACTIVE
   *         @arg @ref LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_JQM | ADC_CFGR_JQDIS));
 }
@@ -4598,10 +5342,14 @@
              ADC_JSQR_JL,
              (TriggerSource & ADC_JSQR_JEXTSEL)          |
              (ExternalTriggerEdge * (is_trigger_not_sw)) |
-             (((Rank4_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (LL_ADC_INJ_RANK_4 & ADC_INJ_RANK_ID_JSQR_MASK)) |
-             (((Rank3_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (LL_ADC_INJ_RANK_3 & ADC_INJ_RANK_ID_JSQR_MASK)) |
-             (((Rank2_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (LL_ADC_INJ_RANK_2 & ADC_INJ_RANK_ID_JSQR_MASK)) |
-             (((Rank1_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (LL_ADC_INJ_RANK_1 & ADC_INJ_RANK_ID_JSQR_MASK)) |
+             (((Rank4_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+              << (LL_ADC_INJ_RANK_4 & ADC_INJ_RANK_ID_JSQR_MASK)) |
+             (((Rank3_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+              << (LL_ADC_INJ_RANK_3 & ADC_INJ_RANK_ID_JSQR_MASK)) |
+             (((Rank2_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+              << (LL_ADC_INJ_RANK_2 & ADC_INJ_RANK_ID_JSQR_MASK)) |
+             (((Rank1_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+              << (LL_ADC_INJ_RANK_1 & ADC_INJ_RANK_ID_JSQR_MASK)) |
              SequencerNbRanks
             );
 }
@@ -4719,7 +5467,8 @@
   /* in register and register position depending on parameter "Channel".      */
   /* Parameter "Channel" is used with masks because containing                */
   /* other bits reserved for other purpose.                                   */
-  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK) >> ADC_SMPRX_REGOFFSET_POS));
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1,
+                                             ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK) >> ADC_SMPRX_REGOFFSET_POS));
 
   MODIFY_REG(*preg,
              ADC_SMPR1_SMP0 << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS),
@@ -4809,12 +5558,14 @@
   *             can be replaced by 3.5 ADC clock cycles.
   *             Refer to function @ref LL_ADC_SetSamplingTimeCommonConfig().
   */
-__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel)
+__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(const ADC_TypeDef *ADCx, uint32_t Channel)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK) >> ADC_SMPRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK)
+                                                                 >> ADC_SMPRX_REGOFFSET_POS));
 
   return (uint32_t)(READ_BIT(*preg,
-                             ADC_SMPR1_SMP0 << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS))
+                             ADC_SMPR1_SMP0
+                             << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS))
                     >> ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS)
                    );
 }
@@ -4874,7 +5625,8 @@
   /* shifted out of range of bits of channels in single or differential mode. */
   MODIFY_REG(ADCx->DIFSEL,
              Channel & ADC_SINGLEDIFF_CHANNEL_MASK,
-             (Channel & ADC_SINGLEDIFF_CHANNEL_MASK) & (ADC_DIFSEL_DIFSEL >> (SingleDiff & ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK)));
+             (Channel & ADC_SINGLEDIFF_CHANNEL_MASK)
+             & (ADC_DIFSEL_DIFSEL >> (SingleDiff & ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK)));
 }
 
 /**
@@ -4917,7 +5669,7 @@
   *         @arg @ref LL_ADC_CHANNEL_15
   * @retval 0: channel in single-ended mode, else: channel in differential mode
   */
-__STATIC_INLINE uint32_t LL_ADC_GetChannelSingleDiff(ADC_TypeDef *ADCx, uint32_t Channel)
+__STATIC_INLINE uint32_t LL_ADC_GetChannelSingleDiff(const ADC_TypeDef *ADCx, uint32_t Channel)
 {
   return (uint32_t)(READ_BIT(ADCx->DIFSEL, (Channel & ADC_SINGLEDIFF_CHANNEL_MASK)));
 }
@@ -5080,8 +5832,10 @@
   /* in register and register position depending on parameter "AWDy".         */
   /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because      */
   /* containing other bits reserved for other purpose.                        */
-  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS)
-                                             + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL));
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR,
+                                             ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS)
+                                             + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK)
+                                                * ADC_AWD_CR12_REGOFFSETGAP_VAL));
 
   MODIFY_REG(*preg,
              (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK),
@@ -5210,60 +5964,62 @@
   *
   *         (0) On STM32L4, parameter available only on analog watchdog number: AWD1.
   */
-__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy)
+__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(const ADC_TypeDef *ADCx, uint32_t AWDy)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS)
-                                                   + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR,
+                                                   ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS)
+                                                   + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK)
+                                                      * ADC_AWD_CR12_REGOFFSETGAP_VAL));
 
-  uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & ADC_AWD_CR_ALL_CHANNEL_MASK);
+  uint32_t analog_wd_monit_channels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK);
 
-  /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled       */
+  /* If "analog_wd_monit_channels" == 0, then the selected AWD is disabled       */
   /* (parameter value LL_ADC_AWD_DISABLE).                                    */
   /* Else, the selected AWD is enabled and is monitoring a group of channels  */
   /* or a single channel.                                                     */
-  if (AnalogWDMonitChannels != 0UL)
+  if (analog_wd_monit_channels != 0UL)
   {
     if (AWDy == LL_ADC_AWD1)
     {
-      if ((AnalogWDMonitChannels & ADC_CFGR_AWD1SGL) == 0UL)
+      if ((analog_wd_monit_channels & ADC_CFGR_AWD1SGL) == 0UL)
       {
         /* AWD monitoring a group of channels */
-        AnalogWDMonitChannels = ((AnalogWDMonitChannels
-                                  | (ADC_AWD_CR23_CHANNEL_MASK)
-                                 )
-                                 & (~(ADC_CFGR_AWD1CH))
-                                );
+        analog_wd_monit_channels = ((analog_wd_monit_channels
+                                     | (ADC_AWD_CR23_CHANNEL_MASK)
+                                    )
+                                    & (~(ADC_CFGR_AWD1CH))
+                                   );
       }
       else
       {
         /* AWD monitoring a single channel */
-        AnalogWDMonitChannels = (AnalogWDMonitChannels
-                                 | (ADC_AWD2CR_AWD2CH_0 << (AnalogWDMonitChannels >> ADC_CFGR_AWD1CH_Pos))
-                                );
+        analog_wd_monit_channels = (analog_wd_monit_channels
+                                    | (ADC_AWD2CR_AWD2CH_0 << (analog_wd_monit_channels >> ADC_CFGR_AWD1CH_Pos))
+                                   );
       }
     }
     else
     {
-      if ((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK)
+      if ((analog_wd_monit_channels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK)
       {
         /* AWD monitoring a group of channels */
-        AnalogWDMonitChannels = (ADC_AWD_CR23_CHANNEL_MASK
-                                 | ((ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN))
-                                );
+        analog_wd_monit_channels = (ADC_AWD_CR23_CHANNEL_MASK
+                                    | ((ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN))
+                                   );
       }
       else
       {
         /* AWD monitoring a single channel */
         /* AWD monitoring a group of channels */
-        AnalogWDMonitChannels = (AnalogWDMonitChannels
-                                 | (ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)
-                                 | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDMonitChannels) << ADC_CFGR_AWD1CH_Pos)
-                                );
+        analog_wd_monit_channels = (analog_wd_monit_channels
+                                    | (ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL)
+                                    | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(analog_wd_monit_channels) << ADC_CFGR_AWD1CH_Pos)
+                                   );
       }
     }
   }
 
-  return AnalogWDMonitChannels;
+  return analog_wd_monit_channels;
 }
 
 /**
@@ -5299,6 +6055,16 @@
   *         impacted: the comparison of analog watchdog thresholds is done on
   *         oversampling final computation (after ratio and shift application):
   *         ADC data register bitfield [15:4] (12 most significant bits).
+  *         Examples:
+  *         - Oversampling ratio and shift selected to have ADC conversion data
+  *           on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...):
+  *           ADC analog watchdog thresholds must be divided by 16.
+  *         - Oversampling ratio and shift selected to have ADC conversion data
+  *           on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...):
+  *           ADC analog watchdog thresholds must be divided by 4.
+  *         - Oversampling ratio and shift selected to have ADC conversion data
+  *           on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...):
+  *           ADC analog watchdog thresholds match directly to ADC data register.
   * @note   On this STM32 series, setting of this feature is conditioned to
   *         ADC state:
   *         ADC must be disabled or enabled without conversion on going
@@ -5326,7 +6092,8 @@
   /* "AWDy".                                                                  */
   /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */
   /* containing other bits reserved for other purpose.                        */
-  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS));
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1,
+                                             ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS));
 
   MODIFY_REG(*preg,
              ADC_TR1_HT1 | ADC_TR1_LT1,
@@ -5366,6 +6133,16 @@
   *         impacted: the comparison of analog watchdog thresholds is done on
   *         oversampling final computation (after ratio and shift application):
   *         ADC data register bitfield [15:4] (12 most significant bits).
+  *         Examples:
+  *         - Oversampling ratio and shift selected to have ADC conversion data
+  *           on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...):
+  *           ADC analog watchdog thresholds must be divided by 16.
+  *         - Oversampling ratio and shift selected to have ADC conversion data
+  *           on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...):
+  *           ADC analog watchdog thresholds must be divided by 4.
+  *         - Oversampling ratio and shift selected to have ADC conversion data
+  *           on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...):
+  *           ADC analog watchdog thresholds match directly to ADC data register.
   * @note   On this STM32 series, setting of this feature is conditioned to
   *         ADC state:
   *         ADC must be disabled or enabled without conversion on going
@@ -5431,7 +6208,8 @@
   *         @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW
   * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
   */
-__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow)
+__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(const ADC_TypeDef *ADCx,
+                                                      uint32_t AWDy, uint32_t AWDThresholdsHighLow)
 {
   const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1,
                                                    ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS));
@@ -5452,7 +6230,7 @@
 
 /**
   * @brief  Set ADC oversampling scope: ADC groups regular and-or injected
-  *         (availability of ADC group injected depends on STM32 families).
+  *         (availability of ADC group injected depends on STM32 series).
   * @note   If both groups regular and injected are selected,
   *         specify behavior of ADC group injected interrupting
   *         group regular: when ADC group injected is triggered,
@@ -5482,7 +6260,7 @@
 
 /**
   * @brief  Get ADC oversampling scope: ADC groups regular and-or injected
-  *         (availability of ADC group injected depends on STM32 families).
+  *         (availability of ADC group injected depends on STM32 series).
   * @note   If both groups regular and injected are selected,
   *         specify behavior of ADC group injected interrupting
   *         group regular: when ADC group injected is triggered,
@@ -5500,7 +6278,7 @@
   *         @arg @ref LL_ADC_OVS_GRP_INJECTED
   *         @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSM));
 }
@@ -5546,7 +6324,7 @@
   *         @arg @ref LL_ADC_OVS_REG_CONT
   *         @arg @ref LL_ADC_OVS_REG_DISCONT
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TROVS));
 }
@@ -5605,7 +6383,7 @@
   *         @arg @ref LL_ADC_OVS_RATIO_128
   *         @arg @ref LL_ADC_OVS_RATIO_256
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR));
 }
@@ -5626,7 +6404,7 @@
   *         @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7
   *         @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8
   */
-__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS));
 }
@@ -5690,7 +6468,7 @@
   *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT
   *         @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM
   */
-__STATIC_INLINE uint32_t LL_ADC_GetMultimode(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_GetMultimode(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DUAL));
 }
@@ -5787,7 +6565,7 @@
   *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B
   *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B
   */
-__STATIC_INLINE uint32_t LL_ADC_GetMultiDMATransfer(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_GetMultiDMATransfer(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_MDMA | ADC_CCR_DMACFG));
 }
@@ -5855,7 +6633,7 @@
   *         (2) Parameter available only if ADC resolution is 12 or 10 bits.\n
   *         (3) Parameter available only if ADC resolution is 12 bits.
   */
-__STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DELAY));
 }
@@ -5936,7 +6714,7 @@
   * @param  ADCx ADC instance
   * @retval 0: deep power down is disabled, 1: deep power down is enabled.
   */
-__STATIC_INLINE uint32_t LL_ADC_IsDeepPowerDownEnabled(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsDeepPowerDownEnabled(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_DEEPPWD) == (ADC_CR_DEEPPWD)) ? 1UL : 0UL);
 }
@@ -5985,7 +6763,7 @@
   * @param  ADCx ADC instance
   * @retval 0: internal regulator is disabled, 1: internal regulator is enabled.
   */
-__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_ADVREGEN) == (ADC_CR_ADVREGEN)) ? 1UL : 0UL);
 }
@@ -6045,7 +6823,7 @@
   * @param  ADCx ADC instance
   * @retval 0: ADC is disabled, 1: ADC is enabled.
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabled(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN)) ? 1UL : 0UL);
 }
@@ -6056,7 +6834,7 @@
   * @param  ADCx ADC instance
   * @retval 0: no ADC disable command on going.
   */
-__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL);
 }
@@ -6100,7 +6878,7 @@
   * @param  ADCx ADC instance
   * @retval 0: calibration complete, 1: calibration in progress.
   */
-__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL)) ? 1UL : 0UL);
 }
@@ -6167,7 +6945,7 @@
   * @param  ADCx ADC instance
   * @retval 0: no conversion is on going on ADC group regular.
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART)) ? 1UL : 0UL);
 }
@@ -6178,7 +6956,7 @@
   * @param  ADCx ADC instance
   * @retval 0: no command of conversion stop is on going on ADC group regular.
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP)) ? 1UL : 0UL);
 }
@@ -6192,7 +6970,7 @@
   * @param  ADCx ADC instance
   * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(const ADC_TypeDef *ADCx)
 {
   return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA));
 }
@@ -6207,7 +6985,7 @@
   * @param  ADCx ADC instance
   * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
   */
-__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(const ADC_TypeDef *ADCx)
 {
   return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA));
 }
@@ -6222,7 +7000,7 @@
   * @param  ADCx ADC instance
   * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
   */
-__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(const ADC_TypeDef *ADCx)
 {
   return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA));
 }
@@ -6237,7 +7015,7 @@
   * @param  ADCx ADC instance
   * @retval Value between Min_Data=0x00 and Max_Data=0xFF
   */
-__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(const ADC_TypeDef *ADCx)
 {
   return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA));
 }
@@ -6252,7 +7030,7 @@
   * @param  ADCx ADC instance
   * @retval Value between Min_Data=0x00 and Max_Data=0x3F
   */
-__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(const ADC_TypeDef *ADCx)
 {
   return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA));
 }
@@ -6279,7 +7057,8 @@
   *         @arg @ref LL_ADC_MULTI_MASTER_SLAVE
   * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
   */
-__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t ConversionData)
+__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(const ADC_Common_TypeDef *ADCxy_COMMON,
+                                                              uint32_t ConversionData)
 {
   return (uint32_t)(READ_BIT(ADCxy_COMMON->CDR,
                              ConversionData)
@@ -6350,7 +7129,7 @@
   * @param  ADCx ADC instance
   * @retval 0: no conversion is on going on ADC group injected.
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_IsConversionOngoing(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_IsConversionOngoing(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_JADSTART) == (ADC_CR_JADSTART)) ? 1UL : 0UL);
 }
@@ -6361,7 +7140,7 @@
   * @param  ADCx ADC instance
   * @retval 0: no command of conversion stop is on going on ADC group injected.
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_IsStopConversionOngoing(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_INJ_IsStopConversionOngoing(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->CR, ADC_CR_JADSTP) == (ADC_CR_JADSTP)) ? 1UL : 0UL);
 }
@@ -6383,9 +7162,10 @@
   *         @arg @ref LL_ADC_INJ_RANK_4
   * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
   */
-__STATIC_INLINE uint32_t LL_ADC_INJ_ReadConversionData32(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint32_t LL_ADC_INJ_ReadConversionData32(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1,
+                                                   ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
 
   return (uint32_t)(READ_BIT(*preg,
                              ADC_JDR1_JDATA)
@@ -6410,9 +7190,10 @@
   *         @arg @ref LL_ADC_INJ_RANK_4
   * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
   */
-__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData12(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData12(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1,
+                                                   ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
 
   return (uint16_t)(READ_BIT(*preg,
                              ADC_JDR1_JDATA)
@@ -6437,9 +7218,10 @@
   *         @arg @ref LL_ADC_INJ_RANK_4
   * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
   */
-__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData10(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData10(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1,
+                                                   ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
 
   return (uint16_t)(READ_BIT(*preg,
                              ADC_JDR1_JDATA)
@@ -6464,9 +7246,10 @@
   *         @arg @ref LL_ADC_INJ_RANK_4
   * @retval Value between Min_Data=0x00 and Max_Data=0xFF
   */
-__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData8(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData8(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1,
+                                                   ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
 
   return (uint8_t)(READ_BIT(*preg,
                             ADC_JDR1_JDATA)
@@ -6491,9 +7274,10 @@
   *         @arg @ref LL_ADC_INJ_RANK_4
   * @retval Value between Min_Data=0x00 and Max_Data=0x3F
   */
-__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(ADC_TypeDef *ADCx, uint32_t Rank)
+__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(const ADC_TypeDef *ADCx, uint32_t Rank)
 {
-  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
+  const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1,
+                                                   ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS));
 
   return (uint8_t)(READ_BIT(*preg,
                             ADC_JDR1_JDATA)
@@ -6517,7 +7301,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL);
 }
@@ -6528,7 +7312,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC)) ? 1UL : 0UL);
 }
@@ -6539,7 +7323,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)) ? 1UL : 0UL);
 }
@@ -6550,7 +7334,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)) ? 1UL : 0UL);
 }
@@ -6561,7 +7345,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL);
 }
@@ -6572,7 +7356,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOC(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOC(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JEOC) == (LL_ADC_FLAG_JEOC)) ? 1UL : 0UL);
 }
@@ -6583,7 +7367,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JEOS) == (LL_ADC_FLAG_JEOS)) ? 1UL : 0UL);
 }
@@ -6594,7 +7378,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JQOVF(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JQOVF(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JQOVF) == (LL_ADC_FLAG_JQOVF)) ? 1UL : 0UL);
 }
@@ -6605,7 +7389,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)) ? 1UL : 0UL);
 }
@@ -6616,7 +7400,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD2) == (LL_ADC_FLAG_AWD2)) ? 1UL : 0UL);
 }
@@ -6627,7 +7411,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL);
 }
@@ -6764,7 +7548,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_ADRDY(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_ADRDY(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_ADRDY_MST) == (LL_ADC_FLAG_ADRDY_MST)) ? 1UL : 0UL);
 }
@@ -6776,7 +7560,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_ADRDY(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_ADRDY(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_ADRDY_SLV) == (LL_ADC_FLAG_ADRDY_SLV)) ? 1UL : 0UL);
 }
@@ -6788,7 +7572,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOC(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOC(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOC_SLV) == (LL_ADC_FLAG_EOC_SLV)) ? 1UL : 0UL);
 }
@@ -6800,7 +7584,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOC(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOC(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOC_SLV) == (LL_ADC_FLAG_EOC_SLV)) ? 1UL : 0UL);
 }
@@ -6812,7 +7596,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOS(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOS(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOS_MST) == (LL_ADC_FLAG_EOS_MST)) ? 1UL : 0UL);
 }
@@ -6824,7 +7608,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOS(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOS(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOS_SLV) == (LL_ADC_FLAG_EOS_SLV)) ? 1UL : 0UL);
 }
@@ -6836,7 +7620,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_OVR(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_OVR(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_MST) == (LL_ADC_FLAG_OVR_MST)) ? 1UL : 0UL);
 }
@@ -6848,7 +7632,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_OVR(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_OVR(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_SLV) == (LL_ADC_FLAG_OVR_SLV)) ? 1UL : 0UL);
 }
@@ -6860,7 +7644,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOSMP(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOSMP(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOSMP_MST) == (LL_ADC_FLAG_EOSMP_MST)) ? 1UL : 0UL);
 }
@@ -6872,7 +7656,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOSMP(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOSMP(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOSMP_SLV) == (LL_ADC_FLAG_EOSMP_SLV)) ? 1UL : 0UL);
 }
@@ -6884,7 +7668,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOC(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOC(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOC_MST) == (LL_ADC_FLAG_JEOC_MST)) ? 1UL : 0UL);
 }
@@ -6896,7 +7680,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOC(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOC(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOC_SLV) == (LL_ADC_FLAG_JEOC_SLV)) ? 1UL : 0UL);
 }
@@ -6908,7 +7692,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOS(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOS_MST) == (LL_ADC_FLAG_JEOS_MST)) ? 1UL : 0UL);
 }
@@ -6920,7 +7704,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOS(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOS_SLV) == (LL_ADC_FLAG_JEOS_SLV)) ? 1UL : 0UL);
 }
@@ -6932,7 +7716,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JQOVF(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JQOVF(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JQOVF_MST) == (LL_ADC_FLAG_JQOVF_MST)) ? 1UL : 0UL);
 }
@@ -6944,7 +7728,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JQOVF(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JQOVF(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JQOVF_SLV) == (LL_ADC_FLAG_JQOVF_SLV)) ? 1UL : 0UL);
 }
@@ -6956,7 +7740,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD1(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD1(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_MST) == (LL_ADC_FLAG_AWD1_MST)) ? 1UL : 0UL);
 }
@@ -6968,7 +7752,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD1(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD1(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_SLV) == (LL_ADC_FLAG_AWD1_SLV)) ? 1UL : 0UL);
 }
@@ -6980,7 +7764,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD2(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD2(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD2_MST) == (LL_ADC_FLAG_AWD2_MST)) ? 1UL : 0UL);
 }
@@ -6992,7 +7776,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD2(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD2(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD2_SLV) == (LL_ADC_FLAG_AWD2_SLV)) ? 1UL : 0UL);
 }
@@ -7004,7 +7788,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD3(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD3(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD3_MST) == (LL_ADC_FLAG_AWD3_MST)) ? 1UL : 0UL);
 }
@@ -7016,7 +7800,7 @@
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD3(ADC_Common_TypeDef *ADCxy_COMMON)
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD3(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD3_SLV) == (LL_ADC_FLAG_AWD3_SLV)) ? 1UL : 0UL);
 }
@@ -7279,7 +8063,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL);
 }
@@ -7291,7 +8075,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC)) ? 1UL : 0UL);
 }
@@ -7303,7 +8087,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)) ? 1UL : 0UL);
 }
@@ -7315,7 +8099,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)) ? 1UL : 0UL);
 }
@@ -7327,7 +8111,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL);
 }
@@ -7339,7 +8123,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOC(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOC(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_JEOC) == (LL_ADC_IT_JEOC)) ? 1UL : 0UL);
 }
@@ -7351,7 +8135,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_JEOS) == (LL_ADC_IT_JEOS)) ? 1UL : 0UL);
 }
@@ -7363,7 +8147,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JQOVF(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JQOVF(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_JQOVF) == (LL_ADC_IT_JQOVF)) ? 1UL : 0UL);
 }
@@ -7375,7 +8159,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)) ? 1UL : 0UL);
 }
@@ -7387,7 +8171,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD2) == (LL_ADC_IT_AWD2)) ? 1UL : 0UL);
 }
@@ -7399,7 +8183,7 @@
   * @param  ADCx ADC instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(ADC_TypeDef *ADCx)
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(const ADC_TypeDef *ADCx)
 {
   return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL);
 }
@@ -7414,25 +8198,25 @@
   */
 
 /* Initialization of some features of ADC common parameters and multimode */
-ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON);
-ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct);
-void        LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct);
+ErrorStatus LL_ADC_CommonDeInit(const ADC_Common_TypeDef *ADCxy_COMMON);
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, const LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct);
+void        LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct);
 
 /* De-initialization of ADC instance, ADC group regular and ADC group injected */
-/* (availability of ADC group injected depends on STM32 families) */
+/* (availability of ADC group injected depends on STM32 series) */
 ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx);
 
 /* Initialization of some features of ADC instance */
-ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct);
-void        LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct);
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct);
+void        LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct);
 
 /* Initialization of some features of ADC instance and ADC group regular */
-ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
-void        LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, const LL_ADC_REG_InitTypeDef *pADC_RegInitStruct);
+void        LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct);
 
 /* Initialization of some features of ADC instance and ADC group injected */
-ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct);
-void        LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct);
+ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, const LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct);
+void        LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct);
 
 /**
   * @}
diff --git a/Inc/stm32l4xx_ll_comp.h b/Inc/stm32l4xx_ll_comp.h
index 261cf5b..49d160d 100644
--- a/Inc/stm32l4xx_ll_comp.h
+++ b/Inc/stm32l4xx_ll_comp.h
@@ -73,33 +73,33 @@
 {
   uint32_t PowerMode;                   /*!< Set comparator operating mode to adjust power and speed.
                                              This parameter can be a value of @ref COMP_LL_EC_POWERMODE
-
-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */
+                                             This feature can be modified afterwards using unitary
+                                             function @ref LL_COMP_SetPowerMode(). */
 
   uint32_t InputPlus;                   /*!< Set comparator input plus (non-inverting input).
                                              This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS
-
-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_COMP_SetInputPlus(). */
 
   uint32_t InputMinus;                  /*!< Set comparator input minus (inverting input).
                                              This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS
-
-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */
+                                             This feature can be modified afterwards using unitary function
+                                              @ref LL_COMP_SetInputMinus(). */
 
   uint32_t InputHysteresis;             /*!< Set comparator hysteresis mode of the input minus.
                                              This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS
-
-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputHysteresis(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_COMP_SetInputHysteresis(). */
 
   uint32_t OutputPolarity;              /*!< Set comparator output polarity.
                                              This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY
-
-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputPolarity(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_COMP_SetOutputPolarity(). */
 
   uint32_t OutputBlankingSource;        /*!< Set comparator blanking source.
                                              This parameter can be a value of @ref COMP_LL_EC_OUTPUT_BLANKING_SOURCE
-
-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputBlankingSource(). */
+                                             This feature can be modified afterwards using unitary function
+                                             @ref LL_COMP_SetOutputBlankingSource(). */
 
 } LL_COMP_InitTypeDef;
 
@@ -113,6 +113,7 @@
   * @{
   */
 
+
 /** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode
   * @{
   */
@@ -124,6 +125,8 @@
   * @}
   */
 
+
+
 /** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode
   * @{
   */
@@ -323,8 +326,7 @@
   * @param  __COMPx__ COMP instance
   * @retval COMP common instance or value "0" if there is no COMP common instance.
   */
-#define __LL_COMP_COMMON_INSTANCE(__COMPx__)                                   \
-  (COMP12_COMMON)
+#define __LL_COMP_COMMON_INSTANCE(__COMPx__)          (COMP12_COMMON)
 
 /**
   * @}
@@ -340,7 +342,8 @@
   */
 
 #if defined(COMP2)
-/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances
+/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope:
+  *           common to several COMP instances
   * @{
   */
 
@@ -372,7 +375,7 @@
   *         @arg @ref LL_COMP_WINDOWMODE_DISABLE
   *         @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
   */
-__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON)
+__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(const COMP_Common_TypeDef *COMPxy_COMMON)
 {
   return (uint32_t)(READ_BIT(COMPxy_COMMON->CSR, COMP_CSR_WINMODE));
 }
@@ -410,7 +413,7 @@
   *         @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
   *         @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
   */
-__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(const COMP_TypeDef *COMPx)
 {
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_PWRMODE));
 }
@@ -514,7 +517,7 @@
   *
   *         (*) Parameter not available on all devices.
   */
-__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(const COMP_TypeDef *COMPx)
 {
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INPSEL));
 }
@@ -589,7 +592,7 @@
   *
   *         (*) Parameter not available on all devices.
   */
-__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(const COMP_TypeDef *COMPx)
 {
 #if defined(COMP_CSR_INMESEL_1)
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN));
@@ -624,7 +627,7 @@
   *         @arg @ref LL_COMP_HYSTERESIS_MEDIUM
   *         @arg @ref LL_COMP_HYSTERESIS_HIGH
   */
-__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(const COMP_TypeDef *COMPx)
 {
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_HYST));
 }
@@ -659,7 +662,7 @@
   *         @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
   *         @arg @ref LL_COMP_OUTPUTPOL_INVERTED
   */
-__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(const COMP_TypeDef *COMPx)
 {
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_POLARITY));
 }
@@ -714,7 +717,7 @@
   *         (2) On STM32L4, parameter available only on comparator instance: COMP1.
   *         (3) On STM32L4, parameter available only on comparator instance: COMP2.
   */
-__STATIC_INLINE uint32_t LL_COMP_GetOutputBlankingSource(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetOutputBlankingSource(const COMP_TypeDef *COMPx)
 {
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_BLANKING));
 }
@@ -732,7 +735,7 @@
 {
   LL_COMP_SetInputPlus(COMPx, InputNonInverting);
 }
-__STATIC_INLINE uint32_t LL_COMP_GetInputNonInverting(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetInputNonInverting(const COMP_TypeDef *COMPx)
 {
   return LL_COMP_GetInputPlus(COMPx);
 }
@@ -741,7 +744,7 @@
 {
   LL_COMP_SetInputMinus(COMPx, InputInverting);
 }
-__STATIC_INLINE uint32_t LL_COMP_GetInputInverting(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_GetInputInverting(const COMP_TypeDef *COMPx)
 {
   return LL_COMP_GetInputMinus(COMPx);
 }
@@ -786,7 +789,7 @@
   * @param  COMPx Comparator instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_IsEnabled(const COMP_TypeDef *COMPx)
 {
   return ((READ_BIT(COMPx->CSR, COMP_CSR_EN) == (COMP_CSR_EN)) ? 1UL : 0UL);
 }
@@ -813,7 +816,7 @@
   * @param  COMPx Comparator instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_COMP_IsLocked(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_IsLocked(const COMP_TypeDef *COMPx)
 {
   return ((READ_BIT(COMPx->CSR, COMP_CSR_LOCK) == (COMP_CSR_LOCK)) ? 1UL : 0UL);
 }
@@ -838,7 +841,7 @@
   *         @arg @ref LL_COMP_OUTPUT_LEVEL_LOW
   *         @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH
   */
-__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx)
+__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(const COMP_TypeDef *COMPx)
 {
   return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_VALUE)
                     >> LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS);
@@ -854,7 +857,7 @@
   */
 
 ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx);
-ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct);
+ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, const LL_COMP_InitTypeDef *COMP_InitStruct);
 void        LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct);
 
 /**
diff --git a/Inc/stm32l4xx_ll_crc.h b/Inc/stm32l4xx_ll_crc.h
index 18690cf..08eeed0 100644
--- a/Inc/stm32l4xx_ll_crc.h
+++ b/Inc/stm32l4xx_ll_crc.h
@@ -184,7 +184,7 @@
   *         @arg @ref LL_CRC_POLYLENGTH_8B
   *         @arg @ref LL_CRC_POLYLENGTH_7B
   */
-__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE));
 }
@@ -215,7 +215,7 @@
   *         @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD
   *         @arg @ref LL_CRC_INDATA_REVERSE_WORD
   */
-__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN));
 }
@@ -242,7 +242,7 @@
   *         @arg @ref LL_CRC_OUTDATA_REVERSE_NONE
   *         @arg @ref LL_CRC_OUTDATA_REVERSE_BIT
   */
-__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT));
 }
@@ -270,7 +270,7 @@
   * @param  CRCx CRC Instance
   * @retval Value programmed in Programmable initial CRC value register
   */
-__STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_GetInitialData(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_REG(CRCx->INIT));
 }
@@ -301,7 +301,7 @@
   * @param  CRCx CRC Instance
   * @retval Value programmed in Programmable Polynomial value register
   */
-__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_REG(CRCx->POL));
 }
@@ -359,7 +359,7 @@
   * @param  CRCx CRC Instance
   * @retval Current CRC calculation result as stored in CRC_DR register (32 bits).
   */
-__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_ReadData32(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_REG(CRCx->DR));
 }
@@ -371,7 +371,7 @@
   * @param  CRCx CRC Instance
   * @retval Current CRC calculation result as stored in CRC_DR register (16 bits).
   */
-__STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint16_t LL_CRC_ReadData16(const CRC_TypeDef *CRCx)
 {
   return (uint16_t)READ_REG(CRCx->DR);
 }
@@ -383,7 +383,7 @@
   * @param  CRCx CRC Instance
   * @retval Current CRC calculation result as stored in CRC_DR register (8 bits).
   */
-__STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint8_t LL_CRC_ReadData8(const CRC_TypeDef *CRCx)
 {
   return (uint8_t)READ_REG(CRCx->DR);
 }
@@ -395,7 +395,7 @@
   * @param  CRCx CRC Instance
   * @retval Current CRC calculation result as stored in CRC_DR register (7 bits).
   */
-__STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint8_t LL_CRC_ReadData7(const CRC_TypeDef *CRCx)
 {
   return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU);
 }
@@ -408,7 +408,7 @@
   * @param  CRCx CRC Instance
   * @retval Value stored in CRC_IDR register
   */
-__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx)
+__STATIC_INLINE uint32_t LL_CRC_Read_IDR(const CRC_TypeDef *CRCx)
 {
   return (uint32_t)(READ_REG(CRCx->IDR));
 }
@@ -439,7 +439,7 @@
   * @{
   */
 
-ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx);
+ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx);
 
 /**
   * @}
diff --git a/Inc/stm32l4xx_ll_dac.h b/Inc/stm32l4xx_ll_dac.h
index 565e142..b3f641c 100644
--- a/Inc/stm32l4xx_ll_dac.h
+++ b/Inc/stm32l4xx_ll_dac.h
@@ -358,7 +358,7 @@
   * @{
   */
 #define LL_DAC_OUTPUT_CONNECT_GPIO         0x00000000U             /*!< The selected DAC channel output is connected to external pin */
-#define LL_DAC_OUTPUT_CONNECT_INTERNAL     (DAC_MCR_MODE1_0)       /*!< The selected DAC channel output is connected to on-chip peripherals via internal paths. On this STM32 serie, output connection depends on output mode (normal or sample and hold) and output buffer state. Refer to comments of function @ref LL_DAC_SetOutputConnection(). */
+#define LL_DAC_OUTPUT_CONNECT_INTERNAL     (DAC_MCR_MODE1_0)       /*!< The selected DAC channel output is connected to on-chip peripherals via internal paths. On this STM32 series, output connection depends on output mode (normal or sample and hold) and output buffer state. Refer to comments of function @ref LL_DAC_SetOutputConnection(). */
 /**
   * @}
   */
@@ -745,7 +745,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_TRIG_SOFTWARE
@@ -778,7 +778,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  WaveAutoGeneration This parameter can be one of the following values:
   *         @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE
@@ -803,7 +803,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE
@@ -832,7 +832,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  NoiseLFSRMask This parameter can be one of the following values:
   *         @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0
@@ -866,7 +866,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0
@@ -904,7 +904,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  TriangleAmplitude This parameter can be one of the following values:
   *         @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1
@@ -939,7 +939,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1
@@ -973,7 +973,7 @@
   *         - @ref LL_DAC_SetOutputBuffer()
   *         - @ref LL_DAC_SetOutputMode()
   *         - @ref LL_DAC_SetOutputConnection()
-  * @note   On this STM32 serie, output connection depends on output mode
+  * @note   On this STM32 series, output connection depends on output mode
   *         (normal or sample and hold) and output buffer state.
   *         - if output connection is set to internal path and output buffer
   *           is enabled (whatever output mode):
@@ -996,7 +996,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  OutputMode This parameter can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_MODE_NORMAL
@@ -1033,7 +1033,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  OutputMode This parameter can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_MODE_NORMAL
@@ -1056,7 +1056,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_MODE_NORMAL
@@ -1071,7 +1071,7 @@
 
 /**
   * @brief  Set the output buffer for the selected DAC channel.
-  * @note   On this STM32 serie, when buffer is enabled, its offset can be
+  * @note   On this STM32 series, when buffer is enabled, its offset can be
   *         trimmed: factory calibration default values can be
   *         replaced by user trimming values, using function
   *         @ref LL_DAC_SetTrimmingValue().
@@ -1082,7 +1082,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  OutputBuffer This parameter can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE
@@ -1105,7 +1105,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE
@@ -1120,7 +1120,7 @@
 
 /**
   * @brief  Set the output connection for the selected DAC channel.
-  * @note   On this STM32 serie, output connection depends on output mode (normal or
+  * @note   On this STM32 series, output connection depends on output mode (normal or
   *         sample and hold) and output buffer state.
   *         - if output connection is set to internal path and output buffer
   *           is enabled (whatever output mode):
@@ -1137,7 +1137,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  OutputConnection This parameter can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO
@@ -1153,7 +1153,7 @@
 
 /**
   * @brief  Get the output connection for the selected DAC channel.
-  * @note   On this STM32 serie, output connection depends on output mode (normal or
+  * @note   On this STM32 series, output connection depends on output mode (normal or
   *         sample and hold) and output buffer state.
   *         - if output connection is set to internal path and output buffer
   *           is enabled (whatever output mode):
@@ -1170,7 +1170,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Returned value can be one of the following values:
   *         @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO
@@ -1197,7 +1197,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  SampleTime Value between Min_Data=0x000 and Max_Data=0x3FF
   * @retval None
@@ -1221,7 +1221,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
   */
@@ -1242,7 +1242,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  HoldTime Value between Min_Data=0x000 and Max_Data=0x3FF
   * @retval None
@@ -1264,7 +1264,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
   */
@@ -1285,7 +1285,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  RefreshTime Value between Min_Data=0x00 and Max_Data=0xFF
   * @retval None
@@ -1307,7 +1307,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Value between Min_Data=0x00 and Max_Data=0xFF
   */
@@ -1337,7 +1337,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1358,7 +1358,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1378,7 +1378,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval State of bit (1 or 0).
   */
@@ -1415,7 +1415,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  Register This parameter can be one of the following values:
   *         @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED
@@ -1450,7 +1450,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1469,7 +1469,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1489,7 +1489,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval State of bit (1 or 0).
   */
@@ -1517,7 +1517,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1536,7 +1536,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1556,7 +1556,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval State of bit (1 or 0).
   */
@@ -1587,7 +1587,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval None
   */
@@ -1608,7 +1608,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  Data Value between Min_Data=0x000 and Max_Data=0xFFF
   * @retval None
@@ -1633,7 +1633,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  Data Value between Min_Data=0x000 and Max_Data=0xFFF
   * @retval None
@@ -1658,7 +1658,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  Data Value between Min_Data=0x00 and Max_Data=0xFF
   * @retval None
@@ -1745,7 +1745,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
   */
diff --git a/Inc/stm32l4xx_ll_dma.h b/Inc/stm32l4xx_ll_dma.h
index add3c4a..5f93614 100644
--- a/Inc/stm32l4xx_ll_dma.h
+++ b/Inc/stm32l4xx_ll_dma.h
@@ -593,7 +593,7 @@
 {
   uint32_t dma_base_addr = (uint32_t)DMAx;
   return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR,
-                  DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL);
+                    DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL);
 }
 
 /**
@@ -752,8 +752,8 @@
   */
 __STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode)
 {
-    uint32_t dma_base_addr = (uint32_t)DMAx;
-    MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PINC,
+  uint32_t dma_base_addr = (uint32_t)DMAx;
+  MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PINC,
              PeriphOrM2MSrcIncMode);
 }
 
@@ -848,7 +848,7 @@
 __STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize)
 {
   uint32_t dma_base_addr = (uint32_t)DMAx;
-  MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PSIZE, 
+  MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PSIZE,
              PeriphOrM2MSrcDataSize);
 }
 
@@ -2225,7 +2225,7 @@
   */
 __STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
 {
-  uint32_t dma_base_addr = (uint32_t)DMAx;    
+  uint32_t dma_base_addr = (uint32_t)DMAx;
   SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE);
 }
 
@@ -2347,7 +2347,7 @@
 {
   uint32_t dma_base_addr = (uint32_t)DMAx;
   return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR,
-                   DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL);
+                    DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL);
 }
 
 /**
@@ -2368,7 +2368,7 @@
 {
   uint32_t dma_base_addr = (uint32_t)DMAx;
   return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR,
-                   DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL);
+                    DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL);
 }
 
 /**
@@ -2389,7 +2389,7 @@
 {
   uint32_t dma_base_addr = (uint32_t)DMAx;
   return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR,
-                   DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL);
+                    DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL);
 }
 
 /**
diff --git a/Inc/stm32l4xx_ll_dmamux.h b/Inc/stm32l4xx_ll_dmamux.h
index 6de6976..1cf26f2 100644
--- a/Inc/stm32l4xx_ll_dmamux.h
+++ b/Inc/stm32l4xx_ll_dmamux.h
@@ -968,7 +968,7 @@
 __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel)
 {
   (void)(DMAMUXx);
-  return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE))? 1UL : 0UL);
+  return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL);
 }
 
 /**
@@ -1049,7 +1049,7 @@
 __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel)
 {
   (void)(DMAMUXx);
-  return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE))? 1UL : 0UL);
+  return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL);
 }
 
 /**
@@ -1207,7 +1207,7 @@
 __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel)
 {
   (void)(DMAMUXx);
-  return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE))? 1UL : 0UL);
+  return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL);
 }
 
 /**
@@ -1606,7 +1606,7 @@
   * @param  DMAMUXx DMAMUXx DMAMUXx Instance
   * @retval None
   */
-__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef * DMAMUXx)
+__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx)
 {
   (void)(DMAMUXx);
   SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF0);
@@ -1902,7 +1902,7 @@
 __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel)
 {
   (void)(DMAMUXx);
-  return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE))? 1UL : 0UL);
+  return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE)) ? 1UL : 0UL);
 }
 
 /**
@@ -1953,7 +1953,7 @@
 __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel)
 {
   (void)(DMAMUXx);
-  return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE))? 1UL : 0UL);
+  return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL);
 }
 
 /**
diff --git a/Inc/stm32l4xx_ll_fmc.h b/Inc/stm32l4xx_ll_fmc.h
index 9f05dcd..4a697d4 100644
--- a/Inc/stm32l4xx_ll_fmc.h
+++ b/Inc/stm32l4xx_ll_fmc.h
@@ -313,7 +313,7 @@
                                         delay between ALE low and RE low.
                                         This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
 } FMC_NAND_InitTypeDef;
-#endif
+#endif /* FMC_BANK3 */
 
 #if defined(FMC_BANK3)
 /**
diff --git a/Inc/stm32l4xx_ll_i2c.h b/Inc/stm32l4xx_ll_i2c.h
index 4575e04..5e1b626 100644
--- a/Inc/stm32l4xx_ll_i2c.h
+++ b/Inc/stm32l4xx_ll_i2c.h
@@ -2241,8 +2241,8 @@
   * @{
   */
 
-ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct);
-ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx);
+ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct);
+ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx);
 void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct);
 
 
diff --git a/Inc/stm32l4xx_ll_lptim.h b/Inc/stm32l4xx_ll_lptim.h
index fa75c3c..0dde7fe 100644
--- a/Inc/stm32l4xx_ll_lptim.h
+++ b/Inc/stm32l4xx_ll_lptim.h
@@ -352,7 +352,7 @@
   * @{
   */
 
-ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx);
+ErrorStatus LL_LPTIM_DeInit(const LPTIM_TypeDef *LPTIMx);
 void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct);
 ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, const LL_LPTIM_InitTypeDef *LPTIM_InitStruct);
 void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx);
diff --git a/Inc/stm32l4xx_ll_lpuart.h b/Inc/stm32l4xx_ll_lpuart.h
index b293047..b2553cb 100644
--- a/Inc/stm32l4xx_ll_lpuart.h
+++ b/Inc/stm32l4xx_ll_lpuart.h
@@ -502,8 +502,9 @@
   ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\
       * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK)
 #else
-#define __LL_LPUART_DIV(__PERIPHCLK__, __BAUDRATE__) (uint32_t)(((((uint64_t)(__PERIPHCLK__)*LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__))\
-                                                                & LPUART_BRR_MASK)
+#define __LL_LPUART_DIV(__PERIPHCLK__, __BAUDRATE__) (uint32_t)\
+  (((((uint64_t)(__PERIPHCLK__)*LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) \
+   & LPUART_BRR_MASK)
 #endif /* USART_PRESC_PRESCALER */
 
 /**
@@ -1492,7 +1493,8 @@
   * @retval Baud Rate
   */
 #if defined(USART_PRESC_PRESCALER)
-__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue)
+__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk,
+                                               uint32_t PrescalerValue)
 #else
 __STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk)
 #endif /* USART_PRESC_PRESCALER */
@@ -1740,8 +1742,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_IsActiveFlag_RXNE  LL_LPUART_IsActiveFlag_RXNE_RXFNE
+#define LL_LPUART_IsActiveFlag_RXNE  LL_LPUART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not
@@ -1778,8 +1779,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_IsActiveFlag_TXE  LL_LPUART_IsActiveFlag_TXE_TXFNF
+#define LL_LPUART_IsActiveFlag_TXE  LL_LPUART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not
@@ -2068,8 +2068,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_EnableIT_RXNE  LL_LPUART_EnableIT_RXNE_RXFNE
+#define LL_LPUART_EnableIT_RXNE  LL_LPUART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Enable RX Not Empty and RX FIFO Not Empty Interrupt
@@ -2107,8 +2106,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_EnableIT_TXE  LL_LPUART_EnableIT_TXE_TXFNF
+#define LL_LPUART_EnableIT_TXE  LL_LPUART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Enable TX Empty and TX FIFO Not Full Interrupt
@@ -2253,8 +2251,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_DisableIT_RXNE  LL_LPUART_DisableIT_RXNE_RXFNE
+#define LL_LPUART_DisableIT_RXNE  LL_LPUART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Disable RX Not Empty and RX FIFO Not Empty Interrupt
@@ -2292,8 +2289,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_DisableIT_TXE  LL_LPUART_DisableIT_TXE_TXFNF
+#define LL_LPUART_DisableIT_TXE  LL_LPUART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Disable TX Empty and TX FIFO Not Full Interrupt
@@ -2438,8 +2434,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_IsEnabledIT_RXNE  LL_LPUART_IsEnabledIT_RXNE_RXFNE
+#define LL_LPUART_IsEnabledIT_RXNE  LL_LPUART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled.
@@ -2477,8 +2472,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_LPUART_IsEnabledIT_TXE  LL_LPUART_IsEnabledIT_TXE_TXFNF
+#define LL_LPUART_IsEnabledIT_TXE  LL_LPUART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled
diff --git a/Inc/stm32l4xx_ll_opamp.h b/Inc/stm32l4xx_ll_opamp.h
index ac53d3d..809b1c7 100644
--- a/Inc/stm32l4xx_ll_opamp.h
+++ b/Inc/stm32l4xx_ll_opamp.h
@@ -143,8 +143,8 @@
 /** @defgroup OPAMP_LL_EC_POWERSUPPLY_RANGE OPAMP power supply range
   * @{
   */
-#define LL_OPAMP_POWERSUPPLY_RANGE_LOW   0x00000000U            /*!< Power supply range low. On STM32L4 serie: Vdda lower than 2.4V. */
-#define LL_OPAMP_POWERSUPPLY_RANGE_HIGH (OPAMP1_CSR_OPARANGE)   /*!< Power supply range high. On STM32L4 serie: Vdda higher than 2.4V. */
+#define LL_OPAMP_POWERSUPPLY_RANGE_LOW   0x00000000U            /*!< Power supply range low. On STM32L4 series: Vdda lower than 2.4V. */
+#define LL_OPAMP_POWERSUPPLY_RANGE_HIGH (OPAMP1_CSR_OPARANGE)   /*!< Power supply range high. On STM32L4 series: Vdda higher than 2.4V. */
 /**
   * @}
   */
@@ -361,7 +361,7 @@
   * @brief  Set OPAMP power range.
   * @note   The OPAMP power range applies to several OPAMP instances
   *         (if several OPAMP instances available on the selected device).
-  * @note   On this STM32 serie, setting of this feature is conditioned to
+  * @note   On this STM32 series, setting of this feature is conditioned to
   *         OPAMP state:
   *         All OPAMP instances of the OPAMP common group must be disabled.
   *         This check can be done with function @ref LL_OPAMP_IsEnabled() for each
@@ -448,7 +448,7 @@
   *            @ref LL_OPAMP_SetFunctionalMode().
   *          - calibration mode: offset calibration of the selected
   *            transistors differential pair NMOS or PMOS.
-  * @note   On this STM32 serie, during calibration, OPAMP functional
+  * @note   On this STM32 series, during calibration, OPAMP functional
   *         mode must be set to standalone or follower mode
   *         (in order to open internal connections to resistors
   *         of PGA mode).
diff --git a/Inc/stm32l4xx_ll_rcc.h b/Inc/stm32l4xx_ll_rcc.h
index cc05c56..6bd72bd 100644
--- a/Inc/stm32l4xx_ll_rcc.h
+++ b/Inc/stm32l4xx_ll_rcc.h
@@ -435,21 +435,21 @@
 /** @defgroup RCC_LL_EC_I2C1_CLKSOURCE  Peripheral I2C clock source selection
   * @{
   */
-#define LL_RCC_I2C1_CLKSOURCE_PCLK1        ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U))                                                  /*!< PCLK1 clock used as I2C1 clock source */
-#define LL_RCC_I2C1_CLKSOURCE_SYSCLK       ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_0 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< SYSCLK clock used as I2C1 clock source */
-#define LL_RCC_I2C1_CLKSOURCE_HSI          ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_1 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< HSI clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_PCLK1        (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U))                                                  /*!< PCLK1 clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_SYSCLK       (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_0 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< SYSCLK clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_HSI          (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_1 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< HSI clock used as I2C1 clock source */
 #if defined(RCC_CCIPR_I2C2SEL)
-#define LL_RCC_I2C2_CLKSOURCE_PCLK1        ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U))                                                  /*!< PCLK1 clock used as I2C2 clock source */
-#define LL_RCC_I2C2_CLKSOURCE_SYSCLK       ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_0 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< SYSCLK clock used as I2C2 clock source */
-#define LL_RCC_I2C2_CLKSOURCE_HSI          ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_1 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< HSI clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_PCLK1        (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U))                                                  /*!< PCLK1 clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_SYSCLK       (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_0 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< SYSCLK clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_HSI          (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_1 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< HSI clock used as I2C2 clock source */
 #endif /* RCC_CCIPR_I2C2SEL */
-#define LL_RCC_I2C3_CLKSOURCE_PCLK1        ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U))                                                  /*!< PCLK1 clock used as I2C3 clock source */
-#define LL_RCC_I2C3_CLKSOURCE_SYSCLK       ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_0 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< SYSCLK clock used as I2C3 clock source */
-#define LL_RCC_I2C3_CLKSOURCE_HSI          ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_1 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< HSI clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_PCLK1        (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U))                                                  /*!< PCLK1 clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_SYSCLK       (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_0 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< SYSCLK clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_HSI          (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_1 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< HSI clock used as I2C3 clock source */
 #if defined(RCC_CCIPR2_I2C4SEL)
-#define LL_RCC_I2C4_CLKSOURCE_PCLK1        ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U))                                                    /*!< PCLK1 clock used as I2C4 clock source */
-#define LL_RCC_I2C4_CLKSOURCE_SYSCLK       ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_0 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< SYSCLK clock used as I2C4 clock source */
-#define LL_RCC_I2C4_CLKSOURCE_HSI          ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_1 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< HSI clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_PCLK1        (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U))                                                    /*!< PCLK1 clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_SYSCLK       (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_0 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< SYSCLK clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_HSI          (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_1 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< HSI clock used as I2C4 clock source */
 #endif /* RCC_CCIPR2_I2C4SEL */
 /**
   * @}
@@ -705,13 +705,13 @@
 /** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source
   * @{
   */
-#define LL_RCC_I2C1_CLKSOURCE              ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL >> RCC_CCIPR_I2C1SEL_Pos)) /*!< I2C1 Clock source selection */
+#define LL_RCC_I2C1_CLKSOURCE              (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL >> RCC_CCIPR_I2C1SEL_Pos)) /*!< I2C1 Clock source selection */
 #if defined(RCC_CCIPR_I2C2SEL)
-#define LL_RCC_I2C2_CLKSOURCE              ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL >> RCC_CCIPR_I2C2SEL_Pos)) /*!< I2C2 Clock source selection */
+#define LL_RCC_I2C2_CLKSOURCE              (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL >> RCC_CCIPR_I2C2SEL_Pos)) /*!< I2C2 Clock source selection */
 #endif /* RCC_CCIPR_I2C2SEL */
-#define LL_RCC_I2C3_CLKSOURCE              ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL >> RCC_CCIPR_I2C3SEL_Pos)) /*!< I2C3 Clock source selection */
+#define LL_RCC_I2C3_CLKSOURCE              (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL >> RCC_CCIPR_I2C3SEL_Pos)) /*!< I2C3 Clock source selection */
 #if defined(RCC_CCIPR2_I2C4SEL)
-#define LL_RCC_I2C4_CLKSOURCE              ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< I2C4 Clock source selection */
+#define LL_RCC_I2C4_CLKSOURCE              (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< I2C4 Clock source selection */
 #endif /* RCC_CCIPR2_I2C4SEL */
 /**
   * @}
diff --git a/Inc/stm32l4xx_ll_rng.h b/Inc/stm32l4xx_ll_rng.h
index b4f4cfa..1fea3c3 100644
--- a/Inc/stm32l4xx_ll_rng.h
+++ b/Inc/stm32l4xx_ll_rng.h
@@ -38,6 +38,15 @@
   */
 
 /* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_LL_Private_Defines RNG Private Defines
+  * @{
+  */
+/*  Health test control register information to use in CCM algorithm */
+#define LL_RNG_HTCFG   0x17590ABCU /*!< Magic number */
+/**
+  * @}
+  */
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
 /* Private macros ------------------------------------------------------------*/
@@ -57,15 +66,15 @@
 {
   uint32_t         ClockErrorDetection; /*!< Clock error detection.
                                       This parameter can be one value of @ref RNG_LL_CED.
-
-                                      This parameter can be modified using unitary functions @ref LL_RNG_EnableClkErrorDetect(). */
+                                      This parameter can be modified using unitary
+                                      functions @ref LL_RNG_EnableClkErrorDetect(). */
 } LL_RNG_InitTypeDef;
 
 /**
   * @}
   */
 #endif /* USE_FULL_LL_DRIVER */
-#endif
+#endif /* RNG_CR_CED */
 /* Exported constants --------------------------------------------------------*/
 /** @defgroup RNG_LL_Exported_Constants RNG Exported Constants
   * @{
@@ -80,44 +89,29 @@
 /**
   * @}
   */
-#endif
+#endif /* RNG_CR_CED */
 
 #if defined(RNG_CR_CONDRST)
 /** @defgroup RNG_LL_Clock_Divider_Factor  Value used to configure an internal
- *            programmable divider acting on the incoming RNG clock
+  *            programmable divider acting on the incoming RNG clock
   * @{
   */
-#define LL_RNG_CLKDIV_BY_1       (0x00000000UL)      /*!< No clock division  */
-#define LL_RNG_CLKDIV_BY_2       (RNG_CR_CLKDIV_0)
-                           /*!< 2 RNG clock cycles per internal RNG clock    */
-#define LL_RNG_CLKDIV_BY_4       (RNG_CR_CLKDIV_1)
-                           /*!< 4 RNG clock cycles per internal RNG clock    */
-#define LL_RNG_CLKDIV_BY_8       (RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                           /*!< 8 RNG clock cycles per internal RNG clock    */
-#define LL_RNG_CLKDIV_BY_16      (RNG_CR_CLKDIV_2)
-                           /*!< 16 RNG clock cycles per internal RNG clock   */
-#define LL_RNG_CLKDIV_BY_32      (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0)
-                           /*!< 32 RNG clock cycles per internal RNG clock   */
-#define LL_RNG_CLKDIV_BY_64      (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1)
-                           /*!< 64 RNG clock cycles per internal RNG clock   */
-#define LL_RNG_CLKDIV_BY_128     (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                           /*!< 128 RNG clock cycles per internal RNG clock  */
-#define LL_RNG_CLKDIV_BY_256     (RNG_CR_CLKDIV_3)
-                           /*!< 256 RNG clock cycles per internal RNG clock  */
-#define LL_RNG_CLKDIV_BY_512     (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_0)
-                           /*!< 512 RNG clock cycles per internal RNG clock  */
-#define LL_RNG_CLKDIV_BY_1024    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1)
-                           /*!< 1024 RNG clock cycles per internal RNG clock */
-#define LL_RNG_CLKDIV_BY_2048    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                          /*!< 2048 RNG clock cycles per internal RNG clock  */
-#define LL_RNG_CLKDIV_BY_4096    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2)
-                           /*!< 4096 RNG clock cycles per internal RNG clock  */
-#define LL_RNG_CLKDIV_BY_8192    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0)
-                          /*!< 8192 RNG clock cycles per internal RNG clock  */
-#define LL_RNG_CLKDIV_BY_16384   (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1)
-                          /*!< 16384 RNG clock cycles per internal RNG clock */
-#define LL_RNG_CLKDIV_BY_32768   (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)
-                          /*!< 32768 RNG clock cycles per internal RNG clock */
+#define LL_RNG_CLKDIV_BY_1       (0x00000000UL)                                                           /*!< No clock division                             */
+#define LL_RNG_CLKDIV_BY_2       (RNG_CR_CLKDIV_0)                                                        /*!< 2 RNG clock cycles per internal RNG clock     */
+#define LL_RNG_CLKDIV_BY_4       (RNG_CR_CLKDIV_1)                                                        /*!< 4 RNG clock cycles per internal RNG clock     */
+#define LL_RNG_CLKDIV_BY_8       (RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)                                      /*!< 8 RNG clock cycles per internal RNG clock     */
+#define LL_RNG_CLKDIV_BY_16      (RNG_CR_CLKDIV_2)                                                        /*!< 16 RNG clock cycles per internal RNG clock    */
+#define LL_RNG_CLKDIV_BY_32      (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0)                                      /*!< 32 RNG clock cycles per internal RNG clock    */
+#define LL_RNG_CLKDIV_BY_64      (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1)                                      /*!< 64 RNG clock cycles per internal RNG clock    */
+#define LL_RNG_CLKDIV_BY_128     (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)                    /*!< 128 RNG clock cycles per internal RNG clock   */
+#define LL_RNG_CLKDIV_BY_256     (RNG_CR_CLKDIV_3)                                                        /*!< 256 RNG clock cycles per internal RNG clock   */
+#define LL_RNG_CLKDIV_BY_512     (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_0)                                      /*!< 512 RNG clock cycles per internal RNG clock   */
+#define LL_RNG_CLKDIV_BY_1024    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1)                                      /*!< 1024 RNG clock cycles per internal RNG clock  */
+#define LL_RNG_CLKDIV_BY_2048    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)                    /*!< 2048 RNG clock cycles per internal RNG clock  */
+#define LL_RNG_CLKDIV_BY_4096    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2)                                      /*!< 4096 RNG clock cycles per internal RNG clock  */
+#define LL_RNG_CLKDIV_BY_8192    (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0)                    /*!< 8192 RNG clock cycles per internal RNG clock  */
+#define LL_RNG_CLKDIV_BY_16384   (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1)                    /*!< 16384 RNG clock cycles per internal RNG clock */
+#define LL_RNG_CLKDIV_BY_32768   (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0)  /*!< 32768 RNG clock cycles per internal RNG clock */
 /**
   * @}
   */
@@ -125,13 +119,16 @@
 /** @defgroup RNG_LL_NIST_Compliance  NIST Compliance configuration
   * @{
   */
-#define LL_RNG_NIST_COMPLIANT     (0x00000000UL) /*!< NIST compliant configuration*/
-#define LL_RNG_NOTNIST_COMPLIANT (RNG_CR_NISTC) /*!< Non NIST compliant configuration */
+#define LL_RNG_NIST_COMPLIANT     (0x00000000UL) /*!< Default NIST compliant configuration*/
+#define LL_RNG_CUSTOM_NIST        (RNG_CR_NISTC) /*!< Custom NIST configuration */
 
+/* Legacy alias */
+#define LL_RNG_NOTNIST_COMPLIANT LL_RNG_CUSTOM_NIST
 /**
   * @}
   */
-#endif/*RNG_CR_CONDRST*/
+
+#endif /* RNG_CR_CONDRST */
 /** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines
   * @brief    Flags defines which can be used with LL_RNG_ReadReg function
   * @{
@@ -228,7 +225,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsEnabled(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL);
 }
@@ -242,7 +239,12 @@
   */
 __STATIC_INLINE void LL_RNG_EnableClkErrorDetect(RNG_TypeDef *RNGx)
 {
+#if defined(RNG_CR_CONDRST)
+  MODIFY_REG(RNGx->CR, RNG_CR_CED | RNG_CR_CONDRST, LL_RNG_CED_ENABLE | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
+#else
   CLEAR_BIT(RNGx->CR, RNG_CR_CED);
+#endif /* RNG_CR_CONDRST*/
 }
 
 /**
@@ -253,7 +255,12 @@
   */
 __STATIC_INLINE void LL_RNG_DisableClkErrorDetect(RNG_TypeDef *RNGx)
 {
+#if defined(RNG_CR_CONDRST)
+  MODIFY_REG(RNGx->CR, RNG_CR_CED | RNG_CR_CONDRST, LL_RNG_CED_DISABLE | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
+#else
   SET_BIT(RNGx->CR, RNG_CR_CED);
+#endif /* RNG_CR_CONDRST*/
 }
 
 /**
@@ -262,7 +269,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsEnabledClkErrorDetect(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsEnabledClkErrorDetect(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->CR, RNG_CR_CED) != (RNG_CR_CED)) ? 1UL : 0UL);
 }
@@ -276,7 +283,7 @@
   */
 __STATIC_INLINE void LL_RNG_SetConditioningResetBit(RNG_TypeDef *RNGx)
 {
-   SET_BIT(RNGx->CR, RNG_CR_CONDRST);
+  SET_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -309,7 +316,7 @@
   */
 __STATIC_INLINE void LL_RNG_ConfigLock(RNG_TypeDef *RNGx)
 {
-   SET_BIT(RNGx->CR, RNG_CR_CONFIGLOCK);
+  SET_BIT(RNGx->CR, RNG_CR_CONFIGLOCK);
 }
 
 /**
@@ -331,7 +338,8 @@
   */
 __STATIC_INLINE void LL_RNG_EnableNistCompliance(RNG_TypeDef *RNGx)
 {
-   CLEAR_BIT(RNGx->CR, RNG_CR_NISTC);
+  MODIFY_REG(RNGx->CR, RNG_CR_NISTC | RNG_CR_CONDRST, LL_RNG_NIST_COMPLIANT | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -342,7 +350,8 @@
   */
 __STATIC_INLINE void LL_RNG_DisableNistCompliance(RNG_TypeDef *RNGx)
 {
-  SET_BIT(RNGx->CR, RNG_CR_NISTC);
+  MODIFY_REG(RNGx->CR, RNG_CR_NISTC | RNG_CR_CONDRST, LL_RNG_CUSTOM_NIST | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -365,7 +374,8 @@
   */
 __STATIC_INLINE void LL_RNG_SetConfig1(RNG_TypeDef *RNGx, uint32_t Config1)
 {
-  MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG1, Config1 << RNG_CR_RNG_CONFIG1_Pos);
+  MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG1 | RNG_CR_CONDRST, (Config1 << RNG_CR_RNG_CONFIG1_Pos) | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -388,7 +398,8 @@
   */
 __STATIC_INLINE void LL_RNG_SetConfig2(RNG_TypeDef *RNGx, uint32_t Config2)
 {
-  MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG2, Config2 << RNG_CR_RNG_CONFIG2_Pos);
+  MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG2 | RNG_CR_CONDRST, (Config2 << RNG_CR_RNG_CONFIG2_Pos) | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -411,7 +422,8 @@
   */
 __STATIC_INLINE void LL_RNG_SetConfig3(RNG_TypeDef *RNGx, uint32_t Config3)
 {
-  MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG3, Config3 << RNG_CR_RNG_CONFIG3_Pos);
+  MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG3 | RNG_CR_CONDRST, (Config3 << RNG_CR_RNG_CONFIG3_Pos) | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -450,7 +462,8 @@
   */
 __STATIC_INLINE void LL_RNG_SetClockDivider(RNG_TypeDef *RNGx, uint32_t Divider)
 {
-  MODIFY_REG(RNGx->CR, RNG_CR_CLKDIV, Divider << RNG_CR_CLKDIV_Pos);
+  MODIFY_REG(RNGx->CR, RNG_CR_CLKDIV | RNG_CR_CONDRST, Divider | RNG_CR_CONDRST);
+  CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);
 }
 
 /**
@@ -479,8 +492,8 @@
 {
   return (uint32_t)READ_BIT(RNGx->CR, RNG_CR_CLKDIV);
 }
-#endif /*RNG_CR_CONDRST*/
-#endif
+#endif /* RNG_CR_CONDRST */
+#endif /* RNG_CR_CED */
 /**
   * @}
   */
@@ -495,7 +508,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL);
 }
@@ -506,7 +519,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL);
 }
@@ -517,7 +530,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL);
 }
@@ -528,7 +541,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL);
 }
@@ -539,7 +552,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL);
 }
@@ -605,7 +618,7 @@
   * @param  RNGx RNG Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(const RNG_TypeDef *RNGx)
 {
   return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL);
 }
@@ -624,7 +637,7 @@
   * @param  RNGx RNG Instance
   * @retval Generated 32-bit random value
   */
-__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(RNG_TypeDef *RNGx)
+__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(const RNG_TypeDef *RNGx)
 {
   return (uint32_t)(READ_REG(RNGx->DR));
 }
@@ -632,6 +645,7 @@
 /**
   * @}
   */
+
 #if defined(RNG_VER_3_2) || defined (RNG_VER_3_1)
 /** @defgroup RNG_LL_EF_Health_Test_Control Health Test Control
   * @{
@@ -664,7 +678,6 @@
   * @}
   */
 #endif  /* RNG_VER_3_2 || RNG_VER_3_1 */
-
 #if defined(USE_FULL_LL_DRIVER)
 /** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions
   * @{
@@ -672,8 +685,8 @@
 #if defined(RNG_CR_CED)
 ErrorStatus LL_RNG_Init(RNG_TypeDef *RNGx, LL_RNG_InitTypeDef *RNG_InitStruct);
 void LL_RNG_StructInit(LL_RNG_InitTypeDef *RNG_InitStruct);
-#endif
-ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx);
+#endif  /* RNG_CR_CED */
+ErrorStatus LL_RNG_DeInit(const RNG_TypeDef *RNGx);
 
 /**
   * @}
@@ -698,4 +711,5 @@
 }
 #endif
 
-#endif /* STM32L4xx_LL_RNG_H */
+#endif /* __STM32L4xx_LL_RNG_H */
+
diff --git a/Inc/stm32l4xx_ll_swpmi.h b/Inc/stm32l4xx_ll_swpmi.h
index 03678f3..efb940c 100644
--- a/Inc/stm32l4xx_ll_swpmi.h
+++ b/Inc/stm32l4xx_ll_swpmi.h
@@ -267,7 +267,7 @@
   *         @arg @ref LL_SWPMI_SW_BUFFER_RX_SINGLE
   *         @arg @ref LL_SWPMI_SW_BUFFER_RX_MULTI
   */
-__STATIC_INLINE uint32_t LL_SWPMI_GetReceptionMode(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_GetReceptionMode(const SWPMI_TypeDef *SWPMIx)
 {
   return (uint32_t)(READ_BIT(SWPMIx->CR, SWPMI_CR_RXMODE));
 }
@@ -295,7 +295,7 @@
   *         @arg @ref LL_SWPMI_SW_BUFFER_TX_SINGLE
   *         @arg @ref LL_SWPMI_SW_BUFFER_TX_MULTI
   */
-__STATIC_INLINE uint32_t LL_SWPMI_GetTransmissionMode(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_GetTransmissionMode(const SWPMI_TypeDef *SWPMIx)
 {
   return (uint32_t)(READ_BIT(SWPMIx->CR, SWPMI_CR_TXMODE));
 }
@@ -347,7 +347,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActivated(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActivated(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->CR, SWPMI_CR_SWPACT) == (SWPMI_CR_SWPACT)) ? 1UL : 0UL);
 }
@@ -394,7 +394,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval A number between Min_Data=0 and Max_Data=63U
   */
-__STATIC_INLINE uint32_t LL_SWPMI_GetBitRatePrescaler(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_GetBitRatePrescaler(const SWPMI_TypeDef *SWPMIx)
 {
   return (uint32_t)(READ_BIT(SWPMIx->BRR, SWPMI_BRR_BR));
 }
@@ -421,7 +421,7 @@
   *         @arg @ref LL_SWPMI_VOLTAGE_CLASS_C
   *         @arg @ref LL_SWPMI_VOLTAGE_CLASS_B
   */
-__STATIC_INLINE uint32_t LL_SWPMI_GetVoltageClass(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_GetVoltageClass(const SWPMI_TypeDef *SWPMIx)
 {
   return (uint32_t)(READ_BIT(SWPMIx->OR, SWPMI_OR_CLASS));
 }
@@ -440,7 +440,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXBF(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXBF(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_RXBFF) == (SWPMI_ISR_RXBFF)) ? 1UL : 0UL);
 }
@@ -451,7 +451,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TXBE(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TXBE(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_TXBEF) == (SWPMI_ISR_TXBEF)) ? 1UL : 0UL);
 }
@@ -462,7 +462,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXBER(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXBER(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_RXBERF) == (SWPMI_ISR_RXBERF)) ? 1UL : 0UL);
 }
@@ -473,7 +473,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXOVR(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXOVR(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_RXOVRF) == (SWPMI_ISR_RXOVRF)) ? 1UL : 0UL);
 }
@@ -484,7 +484,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TXUNR(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TXUNR(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_TXUNRF) == (SWPMI_ISR_TXUNRF)) ? 1UL : 0UL);
 }
@@ -496,7 +496,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXNE(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_RXNE(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_RXNE) == (SWPMI_ISR_RXNE)) ? 1UL : 0UL);
 }
@@ -508,7 +508,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TXE(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TXE(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_TXE) == (SWPMI_ISR_TXE)) ? 1UL : 0UL);
 }
@@ -520,7 +520,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TC(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_TC(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_TCF) == (SWPMI_ISR_TCF)) ? 1UL : 0UL);
 }
@@ -532,7 +532,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_SR(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_SR(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_SRF) == (SWPMI_ISR_SRF)) ? 1UL : 0UL);
 }
@@ -543,7 +543,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_SUSP(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_SUSP(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_SUSP) == (SWPMI_ISR_SUSP)) ? 1UL : 0UL);
 }
@@ -554,7 +554,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_DEACT(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsActiveFlag_DEACT(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->ISR, SWPMI_ISR_DEACTF) == (SWPMI_ISR_DEACTF)) ? 1UL : 0UL);
 }
@@ -848,7 +848,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_SR(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_SR(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_SRIE) == (SWPMI_IER_SRIE)) ? 1UL : 0UL);
 }
@@ -859,7 +859,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TC(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TC(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_TCIE) == (SWPMI_IER_TCIE)) ? 1UL : 0UL);
 }
@@ -870,7 +870,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TX(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TX(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_TIE) == (SWPMI_IER_TIE)) ? 1UL : 0UL);
 }
@@ -881,7 +881,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RX(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RX(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_RIE) == (SWPMI_IER_RIE)) ? 1UL : 0UL);
 }
@@ -892,7 +892,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TXUNR(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TXUNR(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_TXUNRIE) == (SWPMI_IER_TXUNRIE)) ? 1UL : 0UL);
 }
@@ -903,7 +903,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RXOVR(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RXOVR(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_RXOVRIE) == (SWPMI_IER_RXOVRIE)) ? 1UL : 0UL);
 }
@@ -914,7 +914,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RXBER(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RXBER(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_RXBERIE) == (SWPMI_IER_RXBERIE)) ? 1UL : 0UL);
 }
@@ -925,7 +925,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TXBE(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_TXBE(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_TXBEIE) == (SWPMI_IER_TXBEIE)) ? 1UL : 0UL);
 }
@@ -936,7 +936,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RXBF(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledIT_RXBF(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->IER, SWPMI_IER_RXBFIE) == (SWPMI_IER_RXBFIE)) ? 1UL : 0UL);
 }
@@ -977,7 +977,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledDMAReq_RX(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledDMAReq_RX(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->CR, SWPMI_CR_RXDMA) == (SWPMI_CR_RXDMA)) ? 1UL : 0UL);
 }
@@ -1010,7 +1010,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledDMAReq_TX(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_IsEnabledDMAReq_TX(const SWPMI_TypeDef *SWPMIx)
 {
   return ((READ_BIT(SWPMIx->CR, SWPMI_CR_TXDMA) == (SWPMI_CR_TXDMA)) ? 1UL : 0UL);
 }
@@ -1025,7 +1025,7 @@
   *         @arg @ref LL_SWPMI_DMA_REG_DATA_RECEIVE
   * @retval Address of data register
   */
-__STATIC_INLINE uint32_t LL_SWPMI_DMA_GetRegAddr(SWPMI_TypeDef *SWPMIx, uint32_t Direction)
+__STATIC_INLINE uint32_t LL_SWPMI_DMA_GetRegAddr(const SWPMI_TypeDef *SWPMIx, uint32_t Direction)
 {
   uint32_t data_reg_addr;
 
@@ -1057,7 +1057,7 @@
   * @param  SWPMIx SWPMI Instance
   * @retval Value between Min_Data=0x00 and Max_Data=0x1F
   */
-__STATIC_INLINE uint32_t LL_SWPMI_GetReceiveFrameLength(SWPMI_TypeDef *SWPMIx)
+__STATIC_INLINE uint32_t LL_SWPMI_GetReceiveFrameLength(const SWPMI_TypeDef *SWPMIx)
 {
   return (uint32_t)(READ_BIT(SWPMIx->RFL, SWPMI_RFL_RFL));
 }
@@ -1120,8 +1120,8 @@
   * @{
   */
 
-ErrorStatus LL_SWPMI_DeInit(SWPMI_TypeDef *SWPMIx);
-ErrorStatus LL_SWPMI_Init(SWPMI_TypeDef *SWPMIx, LL_SWPMI_InitTypeDef *SWPMI_InitStruct);
+ErrorStatus LL_SWPMI_DeInit(const SWPMI_TypeDef *SWPMIx);
+ErrorStatus LL_SWPMI_Init(SWPMI_TypeDef *SWPMIx, const LL_SWPMI_InitTypeDef *SWPMI_InitStruct);
 void        LL_SWPMI_StructInit(LL_SWPMI_InitTypeDef *SWPMI_InitStruct);
 
 /**
diff --git a/Inc/stm32l4xx_ll_tim.h b/Inc/stm32l4xx_ll_tim.h
index 55c530c..fb8110f 100644
--- a/Inc/stm32l4xx_ll_tim.h
+++ b/Inc/stm32l4xx_ll_tim.h
@@ -957,11 +957,11 @@
 #define LL_TIM_ETR_FILTER_FDIV2_N8             (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0)                    /*!< fSAMPLING=fDTS/2, N=8 */
 #define LL_TIM_ETR_FILTER_FDIV4_N6             (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1)                    /*!< fSAMPLING=fDTS/4, N=6 */
 #define LL_TIM_ETR_FILTER_FDIV4_N8             (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0)   /*!< fSAMPLING=fDTS/4, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV8_N6             TIM_SMCR_ETF_3                                       /*!< fSAMPLING=fDTS/8, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV8_N8             (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0)                    /*!< fSAMPLING=fDTS/16, N=5 */
-#define LL_TIM_ETR_FILTER_FDIV16_N5            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1)                    /*!< fSAMPLING=fDTS/16, N=6 */
-#define LL_TIM_ETR_FILTER_FDIV16_N6            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0)   /*!< fSAMPLING=fDTS/16, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV16_N8            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2)                    /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV8_N6             TIM_SMCR_ETF_3                                       /*!< fSAMPLING=fDTS/8, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV8_N8             (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0)                    /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV16_N5            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1)                    /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV16_N6            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0)   /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV16_N8            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2)                    /*!< fSAMPLING=fDTS/16, N=8 */
 #define LL_TIM_ETR_FILTER_FDIV32_N5            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0)   /*!< fSAMPLING=fDTS/32, N=5 */
 #define LL_TIM_ETR_FILTER_FDIV32_N6            (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1)   /*!< fSAMPLING=fDTS/32, N=6 */
 #define LL_TIM_ETR_FILTER_FDIV32_N8            TIM_SMCR_ETF                                         /*!< fSAMPLING=fDTS/32, N=8 */
@@ -1191,8 +1191,8 @@
 /* STM32L496xx || STM32L4A6xx || */
 /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
 #if defined (STM32L412xx) || defined (STM32L422xx) ||defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx)
-#define LL_TIM_TIM2_ITR1_RMP_NONE          0x00000000U                                                 /* !< No internal trigger on TIM2_ITR1 */
-#define LL_TIM_TIM2_ITR1_RMP_USB_SOF       TIM2_OR1_ITR1_RMP                                           /* !< TIM2_ITR1 is connected to USB SOF */
+#define LL_TIM_TIM2_ITR1_RMP_NONE          0x00000000U                                                 /*!< No internal trigger on TIM2_ITR1 */
+#define LL_TIM_TIM2_ITR1_RMP_USB_SOF       TIM2_OR1_ITR1_RMP                                           /*!< TIM2_ITR1 is connected to USB SOF */
 #endif /* STM32L431xx || STM32L432xx || STM32L442xx || STM32L433xx || STM32L443xx || */
 /* STM32L451xx || STM32L452xx || STM32L462xx */
 #define LL_TIM_TIM2_ETR_RMP_GPIO TIM2_OR1_RMP_MASK                                                     /*!< TIM2_ETR is connected to GPIO */
@@ -1326,6 +1326,7 @@
 /**
 @endcond
   */
+
 /**
   * @}
   */
@@ -1460,11 +1461,6 @@
   * @}
   */
 
-
-/**
-  * @}
-  */
-
 /* Exported functions --------------------------------------------------------*/
 /** @defgroup TIM_LL_Exported_Functions TIM Exported Functions
   * @{
@@ -2061,7 +2057,7 @@
   *         @arg @ref LL_TIM_CHANNEL_CH6
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels)
+__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels)
 {
   return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL);
 }
@@ -2402,7 +2398,7 @@
   *         @arg @ref LL_TIM_CHANNEL_CH6
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel)
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel)
 {
   uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
   const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
@@ -2478,7 +2474,7 @@
   *         @arg @ref LL_TIM_CHANNEL_CH6
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel)
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel)
 {
   uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
   const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
@@ -2563,7 +2559,7 @@
   *         @arg @ref LL_TIM_CHANNEL_CH6
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel)
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel)
 {
   uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
   const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
@@ -3112,7 +3108,7 @@
   * @param  TIMx Timer instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx)
+__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx)
 {
   return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL);
 }
@@ -5049,7 +5045,7 @@
   * @{
   */
 
-ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx);
+ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx);
 void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct);
 ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct);
 void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
diff --git a/Inc/stm32l4xx_ll_usart.h b/Inc/stm32l4xx_ll_usart.h
index 69178ed..322bd2f 100644
--- a/Inc/stm32l4xx_ll_usart.h
+++ b/Inc/stm32l4xx_ll_usart.h
@@ -31,7 +31,7 @@
   * @{
   */
 
-#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5)
+#if defined(USART1) || defined(USART2) || defined(USART3) || defined(UART4) || defined(UART5)
 
 /** @defgroup USART_LL USART
   * @{
@@ -65,6 +65,12 @@
 #endif /* USART_PRESC_PRESCALER */
 
 /* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_LL_Private_Constants USART Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
 /* Private macros ------------------------------------------------------------*/
 #if defined(USE_FULL_LL_DRIVER)
 /** @defgroup USART_LL_Private_Macros USART Private Macros
@@ -1660,7 +1666,7 @@
   *         @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME
   *         @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME
   */
-__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(USART_TypeDef *USARTx)
+__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx)
 {
   return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE));
 }
@@ -3116,8 +3122,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_IsActiveFlag_RXNE  LL_USART_IsActiveFlag_RXNE_RXFNE
+#define LL_USART_IsActiveFlag_RXNE  LL_USART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not
@@ -3157,8 +3162,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_IsActiveFlag_TXE  LL_USART_IsActiveFlag_TXE_TXFNF
+#define LL_USART_IsActiveFlag_TXE  LL_USART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not
@@ -3643,8 +3647,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_EnableIT_RXNE  LL_USART_EnableIT_RXNE_RXFNE
+#define LL_USART_EnableIT_RXNE  LL_USART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Enable RX Not Empty and RX FIFO Not Empty Interrupt
@@ -3684,8 +3687,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_EnableIT_TXE  LL_USART_EnableIT_TXE_TXFNF
+#define LL_USART_EnableIT_TXE  LL_USART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Enable TX Empty and TX FIFO Not Full Interrupt
@@ -3897,8 +3899,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_DisableIT_RXNE  LL_USART_DisableIT_RXNE_RXFNE
+#define LL_USART_DisableIT_RXNE  LL_USART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Disable RX Not Empty and RX FIFO Not Empty Interrupt
@@ -3938,8 +3939,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_DisableIT_TXE  LL_USART_DisableIT_TXE_TXFNF
+#define LL_USART_DisableIT_TXE  LL_USART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Disable TX Empty and TX FIFO Not Full Interrupt
@@ -4153,8 +4153,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_IsEnabledIT_RXNE  LL_USART_IsEnabledIT_RXNE_RXFNE
+#define LL_USART_IsEnabledIT_RXNE  LL_USART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled.
@@ -4194,8 +4193,7 @@
 }
 
 #if defined(USART_CR1_FIFOEN)
-/* Legacy define */
-#define LL_USART_IsEnabledIT_TXE  LL_USART_IsEnabledIT_TXE_TXFNF
+#define LL_USART_IsEnabledIT_TXE  LL_USART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */
 
 /**
   * @brief  Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled
diff --git a/Inc/stm32l4xx_ll_usb.h b/Inc/stm32l4xx_ll_usb.h
index 56e327e..38f9d47 100644
--- a/Inc/stm32l4xx_ll_usb.h
+++ b/Inc/stm32l4xx_ll_usb.h
@@ -41,13 +41,12 @@
 /**
   * @brief  USB Mode definition
   */
-#if defined (USB_OTG_FS)
 
 typedef enum
 {
-  USB_DEVICE_MODE  = 0,
-  USB_HOST_MODE    = 1,
-  USB_DRD_MODE     = 2
+  USB_DEVICE_MODE = 0,
+  USB_HOST_MODE   = 1,
+  USB_DRD_MODE    = 2
 } USB_ModeTypeDef;
 
 /**
@@ -61,7 +60,7 @@
   URB_NYET,
   URB_ERROR,
   URB_STALL
-} USB_OTG_URBStateTypeDef;
+} USB_URBStateTypeDef;
 
 /**
   * @brief  Host channel States  definition
@@ -71,13 +70,14 @@
   HC_IDLE = 0,
   HC_XFRC,
   HC_HALTED,
+  HC_ACK,
   HC_NAK,
   HC_NYET,
   HC_STALL,
   HC_XACTERR,
   HC_BBLERR,
   HC_DATATGLERR
-} USB_OTG_HCStateTypeDef;
+} USB_HCStateTypeDef;
 
 
 /**
@@ -89,16 +89,19 @@
                                          This parameter depends on the used USB core.
                                          This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
 
+#if defined (USB_OTG_FS)
   uint32_t Host_channels;           /*!< Host Channels number.
                                          This parameter Depends on the used USB core.
                                          This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
 
+  uint32_t dma_enable;              /*!< USB DMA state.
+                                         If DMA is not supported this parameter shall be set by default to zero */
+#endif /* defined (USB_OTG_FS) */
+
   uint32_t speed;                   /*!< USB Core speed.
                                          This parameter can be any value of @ref PCD_Speed/HCD_Speed
                                                                                  (HCD_SPEED_xxx, HCD_SPEED_xxx) */
 
-  uint32_t dma_enable;              /*!< Enable or disable of the USB embedded DMA used only for OTG HS.        */
-
   uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
 
   uint32_t phy_itface;              /*!< Select the used PHY interface.
@@ -106,19 +109,20 @@
 
   uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
 
-  uint32_t low_power_enable;        /*!< Enable or disable the low power mode.                                  */
+  uint32_t low_power_enable;        /*!< Enable or disable the low Power Mode.                                  */
 
   uint32_t lpm_enable;              /*!< Enable or disable Link Power Management.                               */
 
   uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */
 
+#if defined (USB_OTG_FS)
   uint32_t vbus_sensing_enable;     /*!< Enable or disable the VBUS Sensing feature.                            */
 
   uint32_t use_dedicated_ep1;       /*!< Enable or disable the use of the dedicated EP1 interrupt.              */
 
   uint32_t use_external_vbus;       /*!< Enable or disable the use of the external VBUS.                        */
-
-} USB_OTG_CfgTypeDef;
+#endif /* defined (USB_OTG_FS) */
+} USB_CfgTypeDef;
 
 typedef struct
 {
@@ -131,8 +135,10 @@
   uint8_t   is_stall;             /*!< Endpoint stall condition
                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 
+#if defined (USB_OTG_FS)
   uint8_t   is_iso_incomplete;    /*!< Endpoint isoc condition
                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+#endif /* defined (USB_OTG_FS) */
 
   uint8_t   type;                 /*!< Endpoint type
                                        This parameter can be any value of @ref USB_LL_EP_Type                   */
@@ -140,25 +146,47 @@
   uint8_t   data_pid_start;       /*!< Initial data PID
                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 
-  uint8_t   even_odd_frame;       /*!< IFrame parity
-                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+#if defined (USB)
+  uint16_t  pmaadress;            /*!< PMA Address
+                                       This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */
 
-  uint16_t  tx_fifo_num;          /*!< Transmission FIFO number
-                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+  uint16_t  pmaaddr0;             /*!< PMA Address0
+                                       This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */
+
+  uint16_t  pmaaddr1;             /*!< PMA Address1
+                                       This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */
+
+  uint8_t   doublebuffer;         /*!< Double buffer enable
+                                       This parameter can be 0 or 1                                             */
+#endif /* defined (USB) */
 
   uint32_t  maxpacket;            /*!< Endpoint Max packet size
                                        This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
 
   uint8_t   *xfer_buff;           /*!< Pointer to transfer buffer                                               */
 
-  uint32_t  dma_addr;             /*!< 32 bits aligned transfer buffer address                                  */
-
   uint32_t  xfer_len;             /*!< Current transfer length                                                  */
 
-  uint32_t  xfer_size;            /*!< requested transfer size                                                  */
-
   uint32_t  xfer_count;           /*!< Partial transfer length in case of multi packet transfer                 */
-} USB_OTG_EPTypeDef;
+
+#if defined (USB_OTG_FS)
+  uint8_t   even_odd_frame;       /*!< IFrame parity
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint16_t  tx_fifo_num;          /*!< Transmission FIFO number
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+
+  uint32_t  dma_addr;             /*!< 32 bits aligned transfer buffer address                                  */
+
+  uint32_t  xfer_size;            /*!< requested transfer size                                                  */
+#endif /* defined (USB_OTG_FS) */
+
+#if defined (USB)
+  uint32_t  xfer_len_db;          /*!< double buffer transfer length used with bulk double buffer in            */
+
+  uint8_t   xfer_fill_db;         /*!< double buffer Need to Fill new buffer  used with bulk_in                 */
+#endif /* defined (USB) */
+} USB_EPTypeDef;
 
 typedef struct
 {
@@ -180,7 +208,8 @@
 
   uint8_t   do_ping;            /*!< Enable or disable the use of the PING protocol for HS mode.                */
 
-  uint8_t   process_ping;       /*!< Execute the PING protocol for HS mode.                                     */
+  uint8_t   hub_port_nbr;       /*!< USB HUB port number                                                        */
+  uint8_t   hub_addr;           /*!< USB HUB address                                                            */
 
   uint8_t   ep_type;            /*!< Endpoint Type.
                                      This parameter can be any value of @ref USB_LL_EP_Type                     */
@@ -193,7 +222,7 @@
 
   uint8_t   *xfer_buff;         /*!< Pointer to transfer buffer.                                                */
 
-  uint32_t  XferSize;             /*!< OTG Channel transfer size.                                               */
+  uint32_t  XferSize;           /*!< OTG Channel transfer size.                                                 */
 
   uint32_t  xfer_len;           /*!< Current transfer length.                                                   */
 
@@ -209,99 +238,22 @@
 
   uint32_t  ErrCnt;             /*!< Host channel error count.                                                  */
 
-  USB_OTG_URBStateTypeDef urb_state;  /*!< URB state.
-                                            This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+  USB_URBStateTypeDef urb_state;  /*!< URB state.
+                                       This parameter can be any value of @ref USB_URBStateTypeDef              */
 
-  USB_OTG_HCStateTypeDef state;       /*!< Host Channel state.
-                                            This parameter can be any value of @ref USB_OTG_HCStateTypeDef  */
-} USB_OTG_HCTypeDef;
+  USB_HCStateTypeDef state;       /*!< Host Channel state.
+                                       This parameter can be any value of @ref USB_HCStateTypeDef               */
+} USB_HCTypeDef;
+
+#if defined (USB_OTG_FS)
+typedef USB_ModeTypeDef     USB_OTG_ModeTypeDef;
+typedef USB_CfgTypeDef      USB_OTG_CfgTypeDef;
+typedef USB_EPTypeDef       USB_OTG_EPTypeDef;
+typedef USB_URBStateTypeDef USB_OTG_URBStateTypeDef;
+typedef USB_HCStateTypeDef  USB_OTG_HCStateTypeDef;
+typedef USB_HCTypeDef       USB_OTG_HCTypeDef;
 #endif /* defined (USB_OTG_FS) */
 
-#if defined (USB)
-
-typedef enum
-{
-  USB_DEVICE_MODE  = 0
-} USB_ModeTypeDef;
-
-/**
-  * @brief  USB Initialization Structure definition
-  */
-typedef struct
-{
-  uint32_t dev_endpoints;           /*!< Device Endpoints number.
-                                         This parameter depends on the used USB core.
-                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
-  uint32_t speed;                   /*!< USB Core speed.
-                                         This parameter can be any value of @ref PCD_Speed/HCD_Speed
-                                                                                 (HCD_SPEED_xxx, HCD_SPEED_xxx) */
-
-  uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
-
-  uint32_t phy_itface;              /*!< Select the used PHY interface.
-                                         This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module  */
-
-  uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
-
-  uint32_t low_power_enable;        /*!< Enable or disable Low Power mode                                       */
-
-  uint32_t lpm_enable;              /*!< Enable or disable Battery charging.                                    */
-
-  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */
-
-  uint32_t dma_enable;              /*!< dma_enable state unused, DMA not supported by FS instance              */
-} USB_CfgTypeDef;
-
-typedef struct
-{
-  uint8_t   num;             /*!< Endpoint number
-                                  This parameter must be a number between Min_Data = 1 and Max_Data = 15    */
-
-  uint8_t   is_in;           /*!< Endpoint direction
-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
-
-  uint8_t   is_stall;        /*!< Endpoint stall condition
-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
-
-  uint8_t   type;            /*!< Endpoint type
-                                  This parameter can be any value of @ref USB_EP_Type                       */
-
-  uint8_t   data_pid_start;  /*!< Initial data PID
-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
-
-  uint16_t  pmaadress;       /*!< PMA Address
-                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */
-
-  uint16_t  pmaaddr0;        /*!< PMA Address0
-                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */
-
-  uint16_t  pmaaddr1;        /*!< PMA Address1
-                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */
-
-  uint8_t   doublebuffer;    /*!< Double buffer enable
-                                  This parameter can be 0 or 1                                              */
-
-  uint16_t  tx_fifo_num;     /*!< This parameter is not required by USB Device FS peripheral, it is used
-                                  only by USB OTG FS peripheral
-                                  This parameter is added to ensure compatibility across USB peripherals    */
-
-  uint32_t  maxpacket;       /*!< Endpoint Max packet size
-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 64KB  */
-
-  uint8_t   *xfer_buff;      /*!< Pointer to transfer buffer                                                */
-
-  uint32_t  xfer_len;        /*!< Current transfer length                                                   */
-
-  uint32_t  xfer_count;      /*!< Partial transfer length in case of multi packet transfer                  */
-
-  uint32_t  xfer_len_db;      /*!< double buffer transfer length used with bulk double buffer in           */
-
-  uint8_t   xfer_fill_db;     /*!< double buffer Need to Fill new buffer  used with bulk_in                */
-
-} USB_EPTypeDef;
-#endif /* defined (USB) */
-
 /* Exported constants --------------------------------------------------------*/
 
 /** @defgroup PCD_Exported_Constants PCD Exported Constants
@@ -328,15 +280,6 @@
   * @}
   */
 
-/** @defgroup USB_LL Device Speed
-  * @{
-  */
-#define USBD_FS_SPEED                          2U
-#define USBH_FSLS_SPEED                        1U
-/**
-  * @}
-  */
-
 /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
   * @{
   */
@@ -393,7 +336,7 @@
 /**
   * @}
   */
-
+#endif /* defined (USB_OTG_FS) */
 /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
   * @{
   */
@@ -405,16 +348,6 @@
   * @}
   */
 
-/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
-  * @{
-  */
-#define EP_SPEED_LOW                           0U
-#define EP_SPEED_FULL                          1U
-#define EP_SPEED_HIGH                          2U
-/**
-  * @}
-  */
-
 /** @defgroup USB_LL_EP_Type USB Low Layer EP Type
   * @{
   */
@@ -427,6 +360,37 @@
   * @}
   */
 
+/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
+  * @{
+  */
+#define EP_SPEED_LOW                           0U
+#define EP_SPEED_FULL                          1U
+#define EP_SPEED_HIGH                          2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type
+  * @{
+  */
+#define HC_PID_DATA0                           0U
+#define HC_PID_DATA2                           1U
+#define HC_PID_DATA1                           2U
+#define HC_PID_SETUP                           3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL Device Speed
+  * @{
+  */
+#define USBD_FS_SPEED                          2U
+#define USBH_FSLS_SPEED                        1U
+/**
+  * @}
+  */
+
+#if defined (USB_OTG_FS)
 /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
   * @{
   */
@@ -449,6 +413,16 @@
   * @}
   */
 
+/** @defgroup USB_LL_HFIR_Defines USB Low Layer frame interval Defines
+  * @{
+  */
+#define HFIR_6_MHZ                          6000U
+#define HFIR_60_MHZ                        60000U
+#define HFIR_48_MHZ                        48000U
+/**
+  * @}
+  */
+
 /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
   * @{
   */
@@ -464,16 +438,15 @@
 #define HCCHAR_BULK                            2U
 #define HCCHAR_INTR                            3U
 
-#define HC_PID_DATA0                           0U
-#define HC_PID_DATA2                           1U
-#define HC_PID_DATA1                           2U
-#define HC_PID_SETUP                           3U
-
 #define GRXSTS_PKTSTS_IN                       2U
 #define GRXSTS_PKTSTS_IN_XFER_COMP             3U
 #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5U
 #define GRXSTS_PKTSTS_CH_HALTED                7U
 
+#define CLEAR_INTERRUPT_MASK          0xFFFFFFFFU
+
+#define HC_MAX_PKT_CNT                       256U
+
 #define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE)
 #define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
 
@@ -491,57 +464,25 @@
                                                         + USB_OTG_HOST_CHANNEL_BASE\
                                                         + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
 
-#endif /* defined (USB_OTG_FS) */
 
-#if defined (USB)
-/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
-  * @{
-  */
-#define EP_MPS_64                              0U
-#define EP_MPS_32                              1U
-#define EP_MPS_16                              2U
-#define EP_MPS_8                               3U
-/**
-  * @}
-  */
-
-/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
-  * @{
-  */
-#define EP_TYPE_CTRL                           0U
-#define EP_TYPE_ISOC                           1U
-#define EP_TYPE_BULK                           2U
-#define EP_TYPE_INTR                           3U
-#define EP_TYPE_MSK                            3U
-/**
-  * @}
-  */
-
-/** @defgroup USB_LL Device Speed
-  * @{
-  */
-#define USBD_FS_SPEED                          2U
-/**
-  * @}
-  */
-
-#define BTABLE_ADDRESS                         0x000U
-#define PMA_ACCESS                             1U
-#endif /* defined (USB) */
-#if defined (USB_OTG_FS)
 #define EP_ADDR_MSK                            0xFU
 #endif /* defined (USB_OTG_FS) */
+
 #if defined (USB)
-#define EP_ADDR_MSK                            0x7U
-#endif /* defined (USB) */
+#define BTABLE_ADDRESS                         0x000U
+#define PMA_ACCESS                             1U
 
 #ifndef USB_EP_RX_STRX
 #define USB_EP_RX_STRX                         (0x3U << 12)
 #endif /* USB_EP_RX_STRX */
 
+#define EP_ADDR_MSK                            0x7U
+
 #ifndef USE_USB_DOUBLE_BUFFER
 #define USE_USB_DOUBLE_BUFFER                  1U
 #endif /* USE_USB_DOUBLE_BUFFER */
+#endif /* defined (USB) */
+
 /**
   * @}
   */
@@ -580,7 +521,6 @@
 HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src,
                                   uint8_t ch_ep_num, uint16_t len);
 
@@ -596,7 +536,8 @@
 HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup);
 uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
 uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
-uint32_t          USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx);
+uint32_t          USB_ReadChInterrupts(USB_OTG_GlobalTypeDef *USBx, uint8_t chnum);
 uint32_t          USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
 uint32_t          USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
 uint32_t          USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
@@ -607,8 +548,8 @@
 HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq);
 HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
 HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
-uint32_t          USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
-uint32_t          USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx);
+uint32_t          USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx);
 HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
                               uint8_t epnum, uint8_t dev_address, uint8_t speed,
                               uint8_t ep_type, uint16_t mps);
@@ -630,8 +571,9 @@
 HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx);
 HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode);
 HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed);
-HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num);
+
+HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef const *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef const *USBx, uint32_t num);
 
 #if defined (HAL_PCD_MODULE_ENABLED)
 HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
@@ -652,7 +594,7 @@
 
 void             *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
 
-uint32_t          USB_ReadInterrupts(USB_TypeDef *USBx);
+uint32_t          USB_ReadInterrupts(USB_TypeDef const *USBx);
 uint32_t          USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx);
 uint32_t          USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
 uint32_t          USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx);
@@ -661,10 +603,10 @@
 HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);
 HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);
 
-void              USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf,
+void              USB_WritePMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf,
                                uint16_t wPMABufAddr, uint16_t wNBytes);
 
-void              USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf,
+void              USB_ReadPMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf,
                               uint16_t wPMABufAddr, uint16_t wNBytes);
 #endif /* defined (USB) */
 /**
diff --git a/Release_Notes.html b/Release_Notes.html
index fe037ef..309fb99 100644
--- a/Release_Notes.html
+++ b/Release_Notes.html
@@ -5,14 +5,11 @@
   <meta name="generator" content="pandoc" />
   <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
   <title>Release Notes for STM32L4xx HAL Drivers</title>
-  <style>
-    code{white-space: pre-wrap;}
-    span.smallcaps{font-variant: small-caps;}
-    span.underline{text-decoration: underline;}
-    div.column{display: inline-block; vertical-align: top; width: 50%;}
-    div.hanging-indent{margin-left: 1.5em; text-indent: -1.5em;}
-    ul.task-list{list-style: none;}
-    .display.math{display: block; text-align: center; margin: 0.5rem auto;}
+  <style type="text/css">
+      code{white-space: pre-wrap;}
+      span.smallcaps{font-variant: small-caps;}
+      span.underline{text-decoration: underline;}
+      div.column{display: inline-block; vertical-align: top; width: 50%;}
   </style>
   <link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
   <!--[if lt IE 9]>
@@ -41,17 +38,178 @@
 <li>Full features coverage of all the supported peripherals</li>
 </ul>
 </div>
-<section id="update-history" class="col-sm-12 col-lg-8">
-<h1>Update History</h1>
+<div class="col-sm-12 col-lg-8">
+<h1 id="update-history">Update History</h1>
 <div class="collapse">
-<input type="checkbox" id="collapse-section32" checked aria-hidden="true"> <label for="collapse-section32" aria-hidden="true">V1.13.3 / 15-April-2022</label>
+<input type="checkbox" id="collapse-section33" checked aria-hidden="true"> <label for="collapse-section33" aria-hidden="true">V1.13.4 / 07-June-2023</label>
 <div>
 <h2 id="main-changes">Main Changes</h2>
 <ul>
+<li>General updates to fix known defects and implementation enhancements.</li>
+<li>HAL code quality enhancement for MISRA-C Rule-8.13 by adding const qualifiers.</li>
+</ul>
+<h2 id="contents">Contents</h2>
+<ul>
+<li><strong>HAL Generic</strong> update
+<ul>
+<li>Allow redefinition of macro UNUSED(x).</li>
+<li>Update of HAL_GetTickFreq() brief.</li>
+<li>Add definition of UNUSED() macro to avoid the generation of a warning related to the unused argument ‘DACx’ and ‘RNGx’.</li>
+</ul></li>
+<li><strong>HAL GPIO</strong> update
+<ul>
+<li>Add missing GPIO_AF14_TIM2 definition for STM32L4P5xx and STM32L4Q5xx.</li>
+</ul></li>
+<li><strong>HAL EXTI</strong> update
+<ul>
+<li>Fix computation of pExtiConfig-&gt;GPIOSel in HAL_EXTI_GetConfigLine().</li>
+<li>Add UNUSED() macro to avoid the generation of a warning related to the unused argument ‘Edge’.</li>
+</ul></li>
+<li><strong>HAL CRC</strong> update
+<ul>
+<li>Add filter in HAL_CRCEx_Polynomial_Set() to exclude even polynomials.</li>
+</ul></li>
+<li><strong>HAL CRYP</strong> update
+<ul>
+<li>Put __CRYP_HandleTypeDef definition under a compilation condition to avoid MISRAC2012-Rule-2.4 violation.</li>
+</ul></li>
+<li><strong>LL ADC</strong> update
+<ul>
+<li>Correct the comment describing parameter VREFINT_CAL_VREF.</li>
+</ul></li>
+<li><strong>LL COMP</strong> update
+<ul>
+<li>Remove a constant integer operand from IS_LL_COMP_OUTPUT_BLANKING_SOURCE definition to avoid MISRAC2012-Rule-10.1_R2 and MISRAC2012-Rule-10.4_b violation.</li>
+</ul></li>
+<li><strong>HAL/LL DAC</strong> update
+<ul>
+<li>Fix incorrect word ‘surcharged’ in functions headers.</li>
+<li>Add UNUSED() macro to avoid the generation of a warning related to the unused argument ‘DACx’.</li>
+<li>Fix HAL_GetTick() timeout vulnerability.</li>
+</ul></li>
+<li><strong>HAL/LL RTC</strong> update
+<ul>
+<li>Check if the RTC calendar has been previously initialized before entering Initialization mode.</li>
+<li>Clear RSF flag using a single ‘write’ operation instead of a ‘read-modify-write’ sequence to avoid clearing other ISR flags if set in the meantime.</li>
+<li>Avoid waiting for the RSF bit to be cleared in the LL_RTC_WaitForSynchro() API to prevent getting stuck in an infinite loop.</li>
+</ul></li>
+<li><strong>HAL RCC</strong> update
+<ul>
+<li>Add a note in HAL_RCC_OscConfig() to inform the users of the steps to take if HSE failed to start.</li>
+<li>Add uint32_t cast to shift left operands constants defined with ‘U’ suffix in case MISRAC2012-Rule-12.2 violated.</li>
+</ul></li>
+<li><strong>HAL/LL HASH</strong> update
+<ul>
+<li>Remove initialization of local variable ‘status’ in HASH_DMAXferCplt() to avoid MISRA-C2012 Rule-2.2.c-related warning ‘Value assigned to variable is never used’.</li>
+</ul></li>
+<li><strong>HAL/LL TIM</strong> update
+<ul>
+<li>Remove useless check on IS_TIM_ADVANCED_INSTANCE() within LL_TIM_BDTR_Init() to fix Break Filter configuration problem with specific TIM instances.</li>
+<li>Remove Lock management from callback management functions.</li>
+</ul></li>
+<li><strong>LL LPTIM</strong> update
+<ul>
+<li>Apply same naming rules to clear FLAG related functions.</li>
+<li>Remove Lock management from callback management functions.</li>
+</ul></li>
+<li><strong>HAL/LL RNG</strong> update
+<ul>
+<li>Add UNUSED() macro to avoid the generation of a warning related to the unused argument ‘RNGx’.</li>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption.</li>
+<li>Add ERROR status use case to API LL_RNG_DeInit().</li>
+</ul></li>
+<li><strong>HAL TSC</strong> update
+<ul>
+<li>Add parameter assertion depends on Duration time restriction link to product.</li>
+</ul></li>
+<li><strong>HAL OPAMP</strong> update
+<ul>
+<li>Fix incorrect word ‘surcharged’ in functions headers.</li>
+</ul></li>
+<li><strong>HAL CAN</strong> update
+<ul>
+<li>Improve protection against bad inputs.</li>
+<li>Put __CAN_HandleTypeDef definition under a compilation condition to avoid MISRAC2012-Rule-2.4 violation.</li>
+</ul></li>
+<li><strong>HAL SAI</strong> update
+<ul>
+<li>Avoid using magic numbers.</li>
+</ul></li>
+<li><strong>HAL UART</strong> update
+<ul>
+<li>Rework of UART_WaitOnFlagUntilTimeout() API to avoid being stuck forever when UART overrun error occurs and to enhance behavior.</li>
+<li>Add new API HAL_UARTEx_GetRxEventType() to retrieve the type of event that has led the RxEventCallback execution.</li>
+<li>Remove HAL_LOCK/HAL_UNLOCK calls in HAL UART Tx and Rx APIs.</li>
+<li>Remove __HAL_LOCK() from HAL_xxx_RegisterCallback()/HAL_xxx_UnRegisterCallback().</li>
+<li>Disable the Receiver Timeout Interrupt when data reception is completed.</li>
+<li>Update initialisation sequence for TXINV, RXINV and TXRXSWAP settings.</li>
+</ul></li>
+<li><strong>HAL USART</strong> update
+<ul>
+<li>Remove __HAL_LOCK() from HAL_xxx_RegisterCallback()/HAL_xxx_UnRegisterCallback().</li>
+</ul></li>
+<li><strong>HAL IRDA</strong> update
+<ul>
+<li>Remove __HAL_LOCK() from HAL_xxx_RegisterCallback()/HAL_xxx_UnRegisterCallback().</li>
+</ul></li>
+<li><strong>HAL SMARTCARD</strong> update
+<ul>
+<li>Remove __HAL_LOCK() from HAL_xxx_RegisterCallback()/HAL_xxx_UnRegisterCallback().</li>
+</ul></li>
+<li><strong>HAL I2C</strong> update
+<ul>
+<li>Update HAL I2C driver to prefetch data before starting the transmission: implementation of errata sheet workaround I2C2-190208 : Transmission stalled after first byte.</li>
+<li>Update I2C_IsErrorOccurred to return error if timeout is detected.</li>
+<li>Clear the ADDRF flag only when direction is confirmed as changed, to prevent that the ADDRF flag is cleared too early when the restart is received.</li>
+<li>Duplicate the test condition after timeout detection to avoid false timeout detection.</li>
+<li>Update [HAL_I2C_IsDeviceReady] API to support 10_bit addressing mode: Update done on the macro I2C_GENERATE_START.</li>
+<li>Update HAL I2C driver to disable all interrupts after end of transaction.</li>
+<li>Update HAL_I2C_Init API to clear ADD10 bit in 7 bit addressing mode.</li>
+<li>Solve Slave No stretch not functional by using HAL Slave interface.</li>
+</ul></li>
+<li><strong>HAL SMBUS</strong> update
+<ul>
+<li>Update HAL I2C driver to prefetch data before starting the transmission: implementation of errata sheet workaround I2C2-190208 : Transmission stalled after first byte.</li>
+</ul></li>
+<li><strong>HAL SDMMC</strong> update
+<ul>
+<li>Add UNUSED() macro to avoid the generation of a warning related to the unused argument ‘Speed’.</li>
+<li>Add missing clear of the static data flags for DMA process in HAL_MMC_IRQHandler().</li>
+<li>Relocate SD_HighSpeed() to avoid MISRAC2012-Rule-8.5_b violation.</li>
+</ul></li>
+<li><strong>HAL SPI</strong> update
+<ul>
+<li>Fix driver to don’t update state in case of error. (HAL_SPI_STATE_READY will be set only in case of HAL_TIMEOUT).</li>
+</ul></li>
+<li><strong>HAL USB OTG</strong> update
+<ul>
+<li>ll_usb.c: remove useless software setting to setup the frame interval at 80%.</li>
+<li>ll_USB.c fix added to USB_ClearInterrupts() and USB_HC_Halt() APIs.</li>
+</ul></li>
+<li><strong>HAL DCMI</strong> update
+<ul>
+<li>Put __DCMI_HandleTypeDef definition under a compilation condition to avoid MISRAC2012-Rule-2.4 violation.</li>
+</ul></li>
+<li><strong>LL CRS</strong> update
+<ul>
+<li>Update LL_CRS_ConfigSynchronization() API to add missing shift of HSI48CalibrationValue parameter value.</li>
+</ul></li>
+<li><strong>HAL USB FS</strong> update
+<ul>
+<li>(PCD): Update RX count mask to avoid overwriting the received bytes.</li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section32" aria-hidden="true"> <label for="collapse-section32" aria-hidden="true">V1.13.3 / 15-April-2022</label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<ul>
 <li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to fix mainly HAL OSPI driver issue</li>
 <li>HAL code quality enhancement for MISRA-C Rule-8.13 by adding const qualifiers</li>
 </ul>
-<h2 id="contents">Contents</h2>
+<h2 id="contents-1">Contents</h2>
 <ul>
 <li><strong>HAL RCC</strong>
 <ul>
@@ -117,11 +275,11 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section31"  aria-hidden="true"> <label for="collapse-section31" aria-hidden="true">V1.13.2 / 26-November-2021</label>
 <div>
-<h2 id="main-changes-1">Main Changes</h2>
+<h2 id="main-changes-2">Main Changes</h2>
 <ul>
 <li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
 </ul>
-<h2 id="contents-1">Contents</h2>
+<h2 id="contents-2">Contents</h2>
 <ul>
 <li><strong>RCC_HAL</strong>
 <ul>
@@ -157,7 +315,7 @@
 </ul></li>
 <li><strong>CAN_HAL</strong>
 <ul>
-<li>Update HAL_CAN_Init() API to be aligned with referance manual and to avoid timeout error:
+<li>Update HAL_CAN_Init() API to be aligned with reference manual and to avoid timeout error:
 <ul>
 <li>Update CAN Initialization sequence to set "request initialization" bit before exit from sleep mode.</li>
 </ul></li>
@@ -276,12 +434,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section30" aria-hidden="true"> <label for="collapse-section30" aria-hidden="true">V1.13.1 / 24-September-2021</label>
 <div>
-<h2 id="main-changes-2">Main Changes</h2>
+<h2 id="main-changes-3">Main Changes</h2>
 <ul>
 <li>Patch release only of ** USB HAL and Low Layer** drivers to include latest corrections</li>
 </ul>
-<h2 id="contents-2">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-3">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>HAL USB PCD</strong> driver
 <ul>
@@ -293,7 +451,7 @@
 <li>Optimize USB IRQ handler by removing multiple reads on USB interrupt registers</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>LL USB</strong> driver
 <ul>
@@ -305,7 +463,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section29" aria-hidden="true"> <label for="collapse-section29" aria-hidden="true">V1.13.0 / 11-February-2021</label>
 <div>
-<h2 id="main-changes-3">Main Changes</h2>
+<h2 id="main-changes-4">Main Changes</h2>
 <ul>
 <li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections
 <ul>
@@ -325,7 +483,7 @@
 </ul></li>
 </ul></li>
 </ul>
-<h2 id="contents-3">Contents</h2>
+<h2 id="contents-4">Contents</h2>
 <h3 id="halll-generic-updates"><strong>HAL/LL generic</strong> updates</h3>
 <ul>
 <li>stm32l4xx_hal_timebase_tim_template.c
@@ -491,12 +649,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section28" aria-hidden="true"> <label for="collapse-section28" aria-hidden="true">V1.12.0 / 26-June-2020</label>
 <div>
-<h2 id="main-changes-4">Main Changes</h2>
+<h2 id="main-changes-5">Main Changes</h2>
 <ul>
 <li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
 <li>Update of <strong>HAL OSPI</strong> driver introducing <strong>compatibility break</strong> with previous versions</li>
 </ul>
-<h2 id="contents-4">Contents</h2>
+<h2 id="contents-5">Contents</h2>
 <h3 id="halll-generic-updates-1"><strong>HAL/LL generic</strong> updates</h3>
 <ul>
 <li>Remove the use of keyword register in HAL/LL drivers</li>
@@ -661,12 +819,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section27" aria-hidden="true"> <label for="collapse-section27" aria-hidden="true">V1.11.1 / 07-February-2020</label>
 <div>
-<h2 id="main-changes-5">Main Changes</h2>
+<h2 id="main-changes-6">Main Changes</h2>
 <ul>
 <li>Patch release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
 </ul>
-<h2 id="contents-5">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-6">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>HAL GPIO</strong> driver
 <ul>
@@ -695,7 +853,7 @@
 <li>Correct MISRA C:2012-Rule-2.4 warning in structure __SMBUS_HandleTypeDef definition</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>LL UTILS</strong> driver
 <ul>
@@ -708,7 +866,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section26" aria-hidden="true"> <label for="collapse-section26" aria-hidden="true">V1.11.0 / 22-November-2019</label>
 <div>
-<h2 id="main-changes-6">Main Changes</h2>
+<h2 id="main-changes-7">Main Changes</h2>
 <ul>
 <li>Release of <strong>HAL and Low Layer</strong> drivers to add support of <strong>STM32L4P5xx/STM32L4Q5xx</strong> devices
 <ul>
@@ -718,8 +876,8 @@
 </li>
 <li>Correction of several issues applicable to other devices</li>
 </ul>
-<h2 id="contents-6">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-7">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>HAL</strong> driver
 <ul>
@@ -728,10 +886,10 @@
 <li><span style="font-style: italic;">SYSCFG_BOOT_FMC</span></li>
 <li><span style="font-style: italic;">SYSCFG_BOOT_OCTOPSPI1</span></li>
 <li><span style="font-style: italic;">SYSCFG_BOOT_OCTOPSPI2</span></li>
-<li>[__HAL_SYSCFG_REMAPMEMORY_FMC()]{style=“font-style: italic;”}</li>
-<li>[__HAL_SYSCFG_REMAPMEMORY_OCTOSPI1()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_SYSCFG_REMAPMEMORY_FMC()</span></li>
+<li><span style="font-style: italic;">__HAL_SYSCFG_REMAPMEMORY_OCTOSPI1()</span><br />
 </li>
-<li>[__HAL_SYSCFG_REMAPMEMORY_OCTOSPI2()]{style=“font-style: italic;”}</li>
+<li><span style="font-style: italic;">__HAL_SYSCFG_REMAPMEMORY_OCTOSPI2()</span></li>
 </ul></li>
 </ul></li>
 <li><strong>HAL ADC</strong> driver
@@ -762,7 +920,7 @@
 <li><strong>HAL FLASH</strong> driver
 <ul>
 <li>Correct <em>FLASH_FLAG_SR_ERRORS</em> and remove <em>FLASH_FLAG_PEMPTY</em> constants definitions in stm32l4xx_hal_flash.h for STM32L496xx/STM32L4A6xx since FLASH_SR PEMPTY bit is not defined for these devices</li>
-<li>Update declaration of APIs <em>HAL_FLASHEx_EnableRunPowerDown()</em>, <em>HAL_FLASHEx_DisableRunPowerDown()</em> and <em>HAL_FLASHEx_OB_DBankConfig()</em> in stm32l4xx_flash_ramfunc.h and stm32l4xx_flash_ramfunc.c to implement new [__RAM_FUNC]{style=“font-style: italic;”} definition</li>
+<li>Update declaration of APIs <em>HAL_FLASHEx_EnableRunPowerDown()</em>, <em>HAL_FLASHEx_DisableRunPowerDown()</em> and <em>HAL_FLASHEx_OB_DBankConfig()</em> in stm32l4xx_flash_ramfunc.h and stm32l4xx_flash_ramfunc.c to implement new <span style="font-style: italic;">__RAM_FUNC</span> definition</li>
 <li>Correct API <em>FLASH_PageErase()</em> in stm32l4xx_hal_flash_ex.c to make sure DBANK bit of FLASH_OPTR register is tested before a page erasure for STM32L4P5xx/STM32L4Q5xx devices</li>
 </ul></li>
 <li><strong>HAL FMC</strong> driver
@@ -775,7 +933,7 @@
 </ul></li>
 <li><strong>HAL GENERIC</strong> driver
 <ul>
-<li>Correct [__RAM_FUNC]{style=“font-style: italic;”} define in stm32l4xx_hal_def.h in order not to impose function type</li>
+<li>Correct <span style="font-style: italic;">__RAM_FUNC</span> define in stm32l4xx_hal_def.h in order not to impose function type</li>
 </ul></li>
 <li><strong>HAL GPIO</strong> driver
 <ul>
@@ -845,25 +1003,25 @@
 <ul>
 <li>Add PSSI peripheral related macros
 <ul>
-<li>[__HAL_RCC_PSSI_CLK_ENABLE()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_CLK_ENABLE()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_CLK_DISABLE()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_CLK_DISABLE()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_IS_CLK_ENABLED()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_IS_CLK_ENABLED()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_IS_CLK_DISABLED()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_IS_CLK_DISABLED()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_FORCE_RESET()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_FORCE_RESET()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_RELEASE_RESET()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_RELEASE_RESET()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_CLK_SLEEP_ENABLE()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_CLK_SLEEP_ENABLE()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_CLK_SLEEP_DISABLE()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_CLK_SLEEP_DISABLE()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_IS_CLK_SLEEP_ENABLED()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_IS_CLK_SLEEP_ENABLED()</span><br />
 </li>
-<li>[__HAL_RCC_PSSI_IS_CLK_SLEEP_DISABLED()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_PSSI_IS_CLK_SLEEP_DISABLED()</span><br />
 </li>
 </ul></li>
 <li>Add <em>HAL_RCCEx_OCTOSPIDelayConfig()</em> API to manage RCC_DLYCFGR register to configure OCTOSPI instances DQS delays. Applicable only to STM32L4P5xx/STM32L4Q5xx and STM32L4Rx/STM32L4Sx devices.</li>
@@ -874,10 +1032,10 @@
 </ul></li>
 <li>Add the following macros to test whether or not OctoSPI clocks are enabled
 <ul>
-<li>[__HAL_RCC_OSPI1_IS_CLK_ENABLED()]{style=“font-style: italic;”}</li>
-<li>[__HAL_RCC_OSPI2_IS_CLK_ENABLED()]{style=“font-style: italic;”}</li>
-<li>[__HAL_RCC_OSPI1_IS_CLK_DISABLED()]{style=“font-style: italic;”}</li>
-<li>[__HAL_RCC_OSPI2_IS_CLK_DISABLED()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_RCC_OSPI1_IS_CLK_ENABLED()</span></li>
+<li><span style="font-style: italic;">__HAL_RCC_OSPI2_IS_CLK_ENABLED()</span></li>
+<li><span style="font-style: italic;">__HAL_RCC_OSPI1_IS_CLK_DISABLED()</span></li>
+<li><span style="font-style: italic;">__HAL_RCC_OSPI2_IS_CLK_DISABLED()</span><br />
 </li>
 </ul></li>
 <li>Correct MISRA C:2012-Rule-21.1 warning in updating the defines created to prevent recursive inclusion in stm32l4xx_hal_rcc.h and stm32l4xx_hal_rcc_ex.h</li>
@@ -930,15 +1088,15 @@
 </ul></li>
 <li>Add macros to force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31)
 <ul>
-<li>[__HAL_TIM_UIFREMAP_ENABLE()]{style=“font-style: italic;”}</li>
-<li>[__HAL_TIM_UIFREMAP_DISABLE()]{style=“font-style: italic;”}<br />
+<li><span style="font-style: italic;">__HAL_TIM_UIFREMAP_ENABLE()</span></li>
+<li><span style="font-style: italic;">__HAL_TIM_UIFREMAP_DISABLE()</span><br />
 </li>
 </ul></li>
-<li>Add [__HAL_TIM_GET_UIFCPY()]{style=“font-style: italic;”} macro to retrieve update interrupt flag (UIF) copy status</li>
+<li>Add <span style="font-style: italic;">__HAL_TIM_GET_UIFCPY()</span> macro to retrieve update interrupt flag (UIF) copy status</li>
 <li>Add macros to manage fast mode for a given channel
 <ul>
-<li>[__HAL_TIM_ENABLE_OCxFAST()]{style=“font-style: italic;”}</li>
-<li>[__HAL_TIM_DISABLE_OCxFAST()]{style=“font-style: italic;”}</li>
+<li><span style="font-style: italic;">__HAL_TIM_ENABLE_OCxFAST()</span></li>
+<li><span style="font-style: italic;">__HAL_TIM_DISABLE_OCxFAST()</span></li>
 </ul></li>
 </ul></li>
 <li><strong>HAL UART</strong> driver
@@ -962,7 +1120,7 @@
 <li>Update <em>USART_SetConfig()</em> to remove functions as argument out of macros</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>LL ADC</strong> driver
 <ul>
@@ -1029,7 +1187,7 @@
 </li>
 </ul></li>
 </ul></li>
-<li>Correct <em>LL_RTC_SCR_ALRAF</em> constant mispelling</li>
+<li>Correct <em>LL_RTC_SCR_ALRAF</em> constant misspelling</li>
 </ul></li>
 <li><strong>LL TIM</strong> driver
 <ul>
@@ -1058,12 +1216,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section22" aria-hidden="true"> <label for="collapse-section22" aria-hidden="true">V1.10.0 / 03-April-2019</label>
 <div>
-<h2 id="main-changes-7">Main Changes</h2>
+<h2 id="main-changes-8">Main Changes</h2>
 <ul>
 <li>Delivery of the new HAL MMC driver</li>
 </ul>
-<h2 id="contents-7">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-8">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>HAL ADC</strong> driver
 <ul>
@@ -1204,7 +1362,7 @@
 <ul>
 <li>Correct MISRA C:2012 Rule-2.4 warning in structure __QSPI_HandleTypeDef definition</li>
 <li>Remove the compilation switches related to QUADSPI1 and QUADSPI2 as all STM32 families have only one instance called QUADSPI</li>
-<li>Fix HAL_QSPI_TIMEOUT_DEFAULT_VALUE mispelling</li>
+<li>Fix HAL_QSPI_TIMEOUT_DEFAULT_VALUE misspelling</li>
 </ul></li>
 <li><strong>HAL RCC</strong> driver
 <ul>
@@ -1230,7 +1388,7 @@
 <li><strong>HAL SD</strong> driver
 <ul>
 <li>Correct MISRA C:2012 Rule-10.4a and Rule-10.5 warnings</li>
-<li>Correct pointer deferencing in HAL_SD_ReadBlocks() and HAL_SD_WriteBlocks() APIs</li>
+<li>Correct pointer dereferencing in HAL_SD_ReadBlocks() and HAL_SD_WriteBlocks() APIs</li>
 <li>Correct gcc warning in HAL_SD_Init() API</li>
 </ul></li>
 <li><strong>HAL SMARTCARD</strong> driver
@@ -1269,7 +1427,7 @@
 <li>Update USART_RxISR_8BIT(), USART_RxISR_16BIT(), USART_RxISR_8BIT_FIFOEN() and USART_RxISR_16BIT_FIFOEN() to ensure TXFT interrupt is handled in all cases</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>LL ADC</strong> driver
 <ul>
@@ -1350,14 +1508,14 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section21" aria-hidden="true"> <label for="collapse-section21" aria-hidden="true">V1.9.0 / 27-July-2018</label>
 <div>
-<h2 id="main-changes-8">Main Changes</h2>
+<h2 id="main-changes-9">Main Changes</h2>
 <ul>
 <li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L412xx/STM32L422xx</strong></li>
 <li>Superset features device STM32L422xx API User Manual available (STM32L422xx_User_Manual.chm)  </li>
 <li>MISRA C:2012 corrections</li>
 </ul>
-<h2 id="contents-8">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-9">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <p>MISRA C:2012 corrections listed hereafter are applicable to LL driver as well.</p>
 <ul>
 <li><p><strong>HAL ADC</strong> driver </p>
@@ -1382,7 +1540,7 @@
 <li>Clarify comments in HAL_ADC_AnalogWDGConfig for analog watchdog thresholds checks when oversampling is enabled</li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL CAN</strong> driver </p>
+<li><strong>HAL CAN</strong> driver 
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 2.2_c, 10.3, 10.4_a, 10.6, 12.2, 13.3, 13.5, 15.7, 17.7, 18.1_b</li>
 <li>stm32l4xx_hal_can.c, stm32l4xx_hal_can.h
@@ -1395,7 +1553,7 @@
 <li>Update HAL_CAN_Stop() to reset any previous sleep mode request to avoid maintaining the sleep mode request active at next HAL_CAN_Start()</li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL COMP</strong> driver</p>
+<li><strong>HAL COMP</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 10.1, 10.3, 10.4, 13.5</li>
 <li>stm32l4xx_hal_comp.c
@@ -1403,44 +1561,44 @@
 <li>Change of time-out duration computation when expressed in microseconds to manage low system clock frequencies</li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL CRC</strong> driver</p>
+<li><strong>HAL CRC</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 10.3, 12.1, 12.2</li>
 </ul></li>
-<li><p><strong>HAL CRYP</strong> driver</p>
+<li><strong>HAL CRYP</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 2.2_c, 8.13, 10.3, 10.4, 10.6, 10.7, 10.8, 12.1, 13.5, 15.7, 17.7, 18.4</li>
 <li>stm32l4xx_hal_cryp_ex.c: CodeSonar warning correction</li>
 </ul></li>
-<li><p><strong>HAL DAC</strong> driver</p>
+<li><strong>HAL DAC</strong> driver
 <ul>
 <li>Correct MISRA C:2012warnings</li>
 </ul></li>
-<li><p><strong>HAL DCMI</strong> driver</p>
+<li><strong>HAL DCMI</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 2.2_c, 8.4, 10.4_a, 12.1, 17.7, 18.4</li>
 </ul></li>
-<li><p><strong>HAL DMA</strong> driver</p>
+<li><strong>HAL DMA</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings</li>
 </ul></li>
-<li><p><strong>HAL DSI</strong> driver</p>
+<li><strong>HAL DSI</strong> driver
 <ul>
 <li>stm32l4xx_hal_dsi.h: add __HAL_DSI_RESET_HANDLE_STATE() macro</li>
 </ul></li>
-<li><p><strong>HAL EXTI</strong> driver <strong>(NEW)</strong></p>
+<li><strong>HAL EXTI</strong> driver <strong>(NEW)</strong>
 <ul>
 <li>New stm32l4xx_hal_exti.h and stm32l4xx_hal_exti.c files  (driver enabled with HAL_EXTI_MODULE_ENABLED in stm32l4xx_hal_conf.h file)</li>
 </ul></li>
-<li><p><strong>HAL FIREWALL</strong> driver</p>
+<li><strong>HAL FIREWALL</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 10.4</li>
 </ul></li>
-<li><p><strong>HAL GPIO</strong> driver</p>
+<li><strong>HAL GPIO</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 10.3, 21.1</li>
 </ul></li>
-<li><p><strong>HAL HASH</strong> driver</p>
+<li><strong>HAL HASH</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 1.3_k, 2.2_c, 9.1_f, 10.3, 12.1, 13.4_b, 13.5, 15.7, 17.7, 21.1</li>
 <li>stm32l4xx_hal_hash.c: 
@@ -1450,30 +1608,30 @@
 </li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL I2C</strong> driver</p>
+<li><strong>HAL I2C</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings</li>
 <li>stm32l4xx_hal_i2c.c: remove extra definition of I2C_GET_DMA_REMAIN_DATA() macro<br />
 </li>
 </ul></li>
-<li><p><strong>HAL IRDA</strong> driver</p>
+<li><strong>HAL IRDA</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 2.1, 2.2_c, 2.4, 2.3, 8.9_a, 10.3, 10.4_a, 10.5, 10.6, 10.7, 11.3, 13.3, 13.5, 15.7, 17.7, 17.8, 18.4, 21.1</li>
 </ul></li>
-<li><p><strong>HAL IWDG</strong> driver</p>
+<li><strong>HAL IWDG</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings reported by rules 2.7, 10.3, 10.4_a</li>
 </ul></li>
-<li><p><strong>HAL LPTIM</strong> driver</p>
+<li><strong>HAL LPTIM</strong> driver
 <ul>
 <li>Add repetition counter management for STM32L412xx/L422xx devices</li>
 <li>New field RepetitionCounter added in LPTIM_InitTypeDef structure</li>
 </ul></li>
-<li><p><strong>HAL OSPI</strong> driver</p>
+<li><strong>HAL OSPI</strong> driver
 <ul>
 <li>stm32l4xx_hal_ospi.h: update memory type definition to support new octal PSRAM from APMemory</li>
 </ul></li>
-<li><p><strong>HAL OPAMP</strong> driver</p>
+<li><strong>HAL OPAMP</strong> driver
 <ul>
 <li>Correct MISRA C:2012 warnings</li>
 </ul></li>
@@ -1518,7 +1676,7 @@
 <li>Correct MISRA C:2012 warnings reported by rule 10.4_a, 10.6, 12.2</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL Drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL Drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL ADC</strong> driver</p>
 <ul>
@@ -1542,7 +1700,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section19" aria-hidden="true"> <label for="collapse-section19" aria-hidden="true">V1.8.3 / 22-May-2018</label>
 <div>
-<h2 id="main-changes-9">Main Changes</h2>
+<h2 id="main-changes-10">Main Changes</h2>
 <p>Maintenance Release of <strong>HAL and Low Layer drivers</strong></p>
 <p><strong>Add support of HAL callback registration feature</strong></p>
 <ul>
@@ -1552,8 +1710,8 @@
 <li><p>Once enabled, the user application may resort to HAL_PPP_RegisterCallback() to register specific callback function(s) and unregister it(them) with HAL_PPP_UnRegisterCallback().</p></li>
 </ul>
 <p>MISRA C:2012 corrections</p>
-<h2 id="contents-9">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-10">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL generic</strong> driver</p>
 <ul>
@@ -1563,7 +1721,7 @@
 </ul></li>
 <li><p><strong>HAL ADC</strong> driver</p>
 <ul>
-<li><p>Fix to enable ADC internal channels (VrefInt, temperature sensor and Vbat) without being too restrictive</p></li>
+<li>Fix to enable ADC internal channels (VrefInt, temperature sensor and Vbat) without being too restrictive</li>
 <li><p>Update internal ADC calibration timeout value</p></li>
 <li><p>Add callback registration feature</p>
 <ul>
@@ -1780,11 +1938,11 @@
 <li>Add callback identifiers in HAL_SMBUS_CallbackIDTypeDef enumerated typedef</li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL SD</strong> driver</p>
+<li><strong>HAL SD</strong> driver
 <ul>
-<li><p>Fix DMA write issue</p></li>
-<li><p>Fix to send the "Stop transfer" command only in case of multiple read or write operations<br />
-</p></li>
+<li>Fix DMA write issue</li>
+<li>Fix to send the "Stop transfer" command only in case of multiple read or write operations<br />
+</li>
 <li><p>Fix typo in FileFormatGroup field of HAL_SD_CardCSDTypedef</p></li>
 <li><p>Add callback registration feature</p>
 <ul>
@@ -1865,7 +2023,7 @@
 </ul></li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL ADC</strong> driver</p>
 <ul>
@@ -1900,12 +2058,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.8.2 / 22-December-2017</label>
 <div>
-<h2 id="main-changes-10">Main Changes</h2>
+<h2 id="main-changes-11">Main Changes</h2>
 <ul>
 <li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
 </ul>
-<h2 id="contents-10">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-11">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>HAL CAN</strong> driver</li>
 </ul>
@@ -1917,13 +2075,13 @@
 <p>Fields of CAN_InitTypeDef structure are renamed  </p>
 <ul>
 <li><p>SJW to SyncJumpWidth, BS1 to TimeSeg1, BS2 to TimeSeg2, TTCM to TimeTriggeredMode, ABOM to AutoBusOff, AWUM to AutoWakeUp, NART to AutoRetransmission (inversed), RFLM to ReceiveFifoLocked and TXFP to TransmitFifoPriority</p></li>
-<li><p>HAL_CAN_Init() is split into both HAL_CAN_Init() and HAL_CAN_Start()</p></li>
-<li><p>HAL_CAN_Transmit() is replaced by HAL_CAN_AddTxMessage() to place Tx request, then HAL_CAN_GetTxMailboxesFreeLevel() for polling until completion</p></li>
-<li><p>HAL_CAN_Transmit_IT() is replaced by HAL_CAN_ActivateNotification() to enable transmission with interrupt mode, then HAL_CAN_AddTxMessage() to place Tx request</p></li>
-<li><p>HAL_CAN_Receive() is replaced by HAL_CAN_GetRxFifoFillLevel() for polling until reception, then HAL_CAN_GetRxMessage() to get Rx message</p></li>
-<li><p>HAL_CAN_Receive_IT() is replaced by HAL_CAN_ActivateNotification() to enable reception with interrupt mode, then HAL_CAN_GetRxMessage() in the receive callback to get Rx message</p></li>
-<li><p>HAL_CAN_Sleep() is renamed to HAL_CAN_RequestSleep()</p></li>
-<li><p>HAL_CAN_TxCpltCallback() is split into HAL_CAN_TxMailbox0CompleteCallback(), HAL_CAN_TxMailbox1CompleteCallback() and HAL_CAN_TxMailbox2CompleteCallback()</p></li>
+<li>HAL_CAN_Init() is split into both HAL_CAN_Init() and HAL_CAN_Start()</li>
+<li>HAL_CAN_Transmit() is replaced by HAL_CAN_AddTxMessage() to place Tx request, then HAL_CAN_GetTxMailboxesFreeLevel() for polling until completion</li>
+<li>HAL_CAN_Transmit_IT() is replaced by HAL_CAN_ActivateNotification() to enable transmission with interrupt mode, then HAL_CAN_AddTxMessage() to place Tx request</li>
+<li>HAL_CAN_Receive() is replaced by HAL_CAN_GetRxFifoFillLevel() for polling until reception, then HAL_CAN_GetRxMessage() to get Rx message</li>
+<li>HAL_CAN_Receive_IT() is replaced by HAL_CAN_ActivateNotification() to enable reception with interrupt mode, then HAL_CAN_GetRxMessage() in the receive callback to get Rx message</li>
+<li>HAL_CAN_Sleep() is renamed to HAL_CAN_RequestSleep()</li>
+<li>HAL_CAN_TxCpltCallback() is split into HAL_CAN_TxMailbox0CompleteCallback(), HAL_CAN_TxMailbox1CompleteCallback() and HAL_CAN_TxMailbox2CompleteCallback()</li>
 <li><p>HAL_CAN_RxCpltCallback() is split into HAL_CAN_RxFifo0MsgPendingCallback() and HAL_CAN_RxFifo1MsgPendingCallback()</p></li>
 </ul>
 <p>More complete "how to use the new driver" is detailed in the driver header section itself.</p>
@@ -1960,7 +2118,7 @@
 <li>Fix MISRA C-2004 rule 10.6 ('U' suffix)</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL CRC</strong> driver</p>
 <ul>
@@ -1982,12 +2140,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.8.1 / 13-October-2017</label>
 <div>
-<h2 id="main-changes-11">Main Changes</h2>
+<h2 id="main-changes-12">Main Changes</h2>
 <ul>
 <li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
 </ul>
-<h2 id="contents-11">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-12">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL generic</strong> driver</p>
 <ul>
@@ -2038,7 +2196,7 @@
 <li>Fix RD_WRN bit management in case of SMBUS_NO_STARTSTOP request</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p>**LLDAC driver</p>
 <ul>
@@ -2063,18 +2221,19 @@
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.8.0 / 25-August-2017</label>
-<h2 id="main-changes-12">Main Changes</h2>
+<div>
+<h2 id="main-changes-13">Main Changes</h2>
 <ul>
 <li><p>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L4R5xx/STM32L4R7xx/STM32L4R9xx/STM32L4S5xx/STM32L4S7xx/STM32L4S9xx</strong> devices</p></li>
 <li><p>New OctoSPI, DSI, LTDC, GFXMMU peripherals supported in <strong>new HAL OSPI, HAL DSI, HAL LTDC</strong> and <strong>HAL GFXMMU</strong> drivers</p></li>
 <li><p>Superset features device STM32L4S9xx API User Manual available (STM32L4S9xx_User_Manual.chm)  </p></li>
 </ul>
 <p>    ## Contents</p>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
-<li><p><strong>HAL DSI</strong> driver <strong>(NEW)</strong>: stm32l4xx_hal_dsi.h/.c files</p></li>
-<li><p><strong>HAL GFXMMU</strong> driver <strong>(NEW)</strong>:stm32l4xx_hal_gfxmmu.h/.c files</p></li>
-<li><p><strong>HAL LTDC</strong> driver <strong>(NEW)</strong>:stm32l4xx_hal_ltdc.h/.c and extension stm32l4xx_hal_ltdc_ex.h/.c files</p></li>
+<li><strong>HAL DSI</strong> driver <strong>(NEW)</strong>: stm32l4xx_hal_dsi.h/.c files</li>
+<li><strong>HAL GFXMMU</strong> driver <strong>(NEW)</strong>:stm32l4xx_hal_gfxmmu.h/.c files</li>
+<li><strong>HAL LTDC</strong> driver <strong>(NEW)</strong>:stm32l4xx_hal_ltdc.h/.c and extension stm32l4xx_hal_ltdc_ex.h/.c files</li>
 <li><p><strong>HAL OSPI</strong> driver <strong>(NEW)</strong>:stm32l4xx_hal_ospi.h/.c files</p></li>
 <li><p><strong>HAL generic</strong> driver</p>
 <ul>
@@ -2101,9 +2260,9 @@
 <ul>
 <li><p>Fix DMAMUX synchronization signal configuration in HAL_DMAEx_ConfigMuxSync()</p></li>
 <li><p>Support of DMAMUX1 peripheral via new DMA Extension APIs</p></li>
-<li><p>HAL_DMAEx_ConfigMuxRequestGenerator()</p></li>
-<li><p>HAL_DMAEx_EnableMuxRequestGenerator(), HAL_DMAEx_DisableMuxRequestGenerator()</p></li>
-<li><p>HAL_DMAEx_ConfigMuxSync()</p></li>
+<li>HAL_DMAEx_ConfigMuxRequestGenerator()</li>
+<li>HAL_DMAEx_EnableMuxRequestGenerator(), HAL_DMAEx_DisableMuxRequestGenerator()</li>
+<li>HAL_DMAEx_ConfigMuxSync()</li>
 <li><p>HAL_DMAEx_MUX_IRQHandler()</p></li>
 </ul></li>
 <li><p><strong>HAL DFSDM</strong> driver extension (new stm32l4xx_hal_dfsdm_ex.h/.c)</p>
@@ -2151,10 +2310,10 @@
 </ul></li>
 <li><p><strong>HAL RCC</strong> driver </p>
 <ul>
-<li><p>Add clock management of new peripherals: DSI, GFXMMU, LTDC, OSPI1, OSPI2, OSPIM</p></li>
-<li><p>Add OctoSPI peripherals clock source frequency computation in HAL_RCCEx_GetPeriphCLKFreq()</p></li>
-<li><p>Fix issue with main PLL divider M value to allow 1 to 16 value range on STM32L4Rx/STM32L4Sx devices</p></li>
-<li><p>Fix SDMMC1 clock source selection possibilities in HAL_RCCEx_PeriphCLKConfig(), __HAL_RCC_SDMMC1_CONFIG() and __HAL_RCC_GET_SDMMC1_SOURCE()</p></li>
+<li>Add clock management of new peripherals: DSI, GFXMMU, LTDC, OSPI1, OSPI2, OSPIM</li>
+<li>Add OctoSPI peripherals clock source frequency computation in HAL_RCCEx_GetPeriphCLKFreq()</li>
+<li>Fix issue with main PLL divider M value to allow 1 to 16 value range on STM32L4Rx/STM32L4Sx devices</li>
+<li>Fix SDMMC1 clock source selection possibilities in HAL_RCCEx_PeriphCLKConfig(), __HAL_RCC_SDMMC1_CONFIG() and __HAL_RCC_GET_SDMMC1_SOURCE()</li>
 <li><p>Fix HAL_RCCEx_GetPeriphCLKFreq() to take into account PLLSAI1 and PLLSAI2 divider M values (1 to 16 range) on STM32L4Rx/STM32L4Sx devices</p></li>
 <li><p>Add undershoot/overshoot management in HAL_RCC_ClockConfig() when switching to/from system clock from main PLL above 80Mhz</p></li>
 </ul></li>
@@ -2187,11 +2346,11 @@
 <li><p><strong>HAL SMBUS</strong> driver</p>
 <ul>
 <li>Add Analog and digital filter configuration APIs: HAL_SMBUS_ConfigAnalogFilter() and HAL_SMBUS_ConfigDigitalFilter() </li>
-<li>Add error management if occuring during STOP process</li>
+<li>Add error management if occurring during STOP process</li>
 </ul></li>
 <li><p><strong>HAL SPI</strong> driver</p>
 <ul>
-<li>Add control of RXFIFO emty at end of transmissing in Master transmission 2 lines mode</li>
+<li>Add control of RXFIFO empty at end of transmissing in Master transmission 2 lines mode</li>
 </ul></li>
 <li><p><strong>HAL SWPMI</strong> driver</p>
 <ul>
@@ -2206,9 +2365,9 @@
 </ul></li>
 <li><p><strong>HAL UART</strong> driver</p>
 <ul>
-<li><p>Add Clock Prescaler management for STM32L4Rx/STM32L4Sx devices only</p></li>
-<li><p>UART_InitTypeDef structure update to add ClockPrescaler parameter<br />
-</p></li>
+<li>Add Clock Prescaler management for STM32L4Rx/STM32L4Sx devices only</li>
+<li>UART_InitTypeDef structure update to add ClockPrescaler parameter<br />
+</li>
 <li><p>Add FIFO mode management for STM32L4Rx/STM32L4Sx devices only</p></li>
 <li><p>new HAL_UARTEx_EnableFifoMode(), HAL_UARTEx_DisableFifoMode(), HAL_UARTEx_SetTxFifoThreshold(), HAL_UARTEx_SetRxFifoThreshold(), HAL_UARTEx_RxFifoFullCallback() and HAL_UARTEx_TxFifoEmptyCallback APIs</p></li>
 <li><p>Add SPI Slave mode management for STM32L4Rx/STM32L4Sx devices only</p></li>
@@ -2217,15 +2376,15 @@
 <li><p><strong>HAL USART</strong> driver (new stm32l4xx_hal_usart_ex.c)</p>
 <ul>
 <li><p>Add Clock Prescaler management for STM32L4Rx/STM32L4Sx devices only</p></li>
-<li><p>USART_InitTypeDef structure update to add ClockPrescaler parameter<br />
-</p></li>
+<li>USART_InitTypeDef structure update to add ClockPrescaler parameter<br />
+</li>
 <li><p>Add FIFO mode management for STM32L4Rx/STM32L4Sx devices only</p></li>
 <li><p>new HAL_USARTEx_EnableFifoMode(), HAL_USARTEx_DisableFifoMode(), HAL_USARTEx_SetTxFifoThreshold(), HAL_USARTEx_SetRxFifoThreshold(), HAL_USARTEx_RxFifoFullCallback() and HAL_USARTEx_TxFifoEmptyCallback APIs</p></li>
 <li><p>Add SPI Slave mode management for STM32L4Rx/STM32L4Sx devices only</p></li>
 <li><p>new HAL_USARTEx_EnableSlaveMode(), HAL_USARTEx_DisableSlaveMode() and HAL_USARTEx_ConfigNSS()</p></li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <p><strong>LL DMAMUX</strong> driver <strong>(NEW)</strong>: stm32l4xx_ll_dmamux.h</p>
 <p><strong>All LL</strong> drivers update to remove usage of CMSIS POSITION_VAL() macro and resort to xx_Pos position bit definition</p>
 <ul>
@@ -2263,7 +2422,7 @@
 <li><p>LL_PWR_EnableSRAM3Retention(), LL_PWR_DisableSRAM3Retention() and LL_PWR_IsEnabledSRAM3Retention()</p></li>
 <li><p>Add voltage range 1 boost mode APIs</p></li>
 <li><p>LL_PWR_EnableRange1BoostMode(), LL_PWR_DisableRange1BoostMode() and LL_PWR_IsEnabledRange1BoostMode()</p></li>
-<li><p>For compatibility purpose accross STM32 series, rename LL_PWR_IsActiveFlag_VOSF() to LL_PWR_IsActiveFlag_VOS()</p></li>
+<li><p>For compatibility purpose across STM32 series, rename LL_PWR_IsActiveFlag_VOSF() to LL_PWR_IsActiveFlag_VOS()</p></li>
 <li><p>Add DSI pins pull-down management</p></li>
 <li><p>new LL_PWR_EnableDSIPinsPDActivation(), LL_PWR_DisableDSIPinsPDActivation() and LL_PWR_IsEnabledDSIPinsPDActivation APIs</p></li>
 </ul></li>
@@ -2316,15 +2475,16 @@
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">V1.7.2 / 16-June-2017</label>
 <div>
-<h2 id="main-changes-13">Main Changes</h2>
+<h2 id="main-changes-14">Main Changes</h2>
 <ul>
 <li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
 </ul>
-<h2 id="contents-12">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-13">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL CAN</strong> driver</p>
 <ul>
@@ -2334,7 +2494,7 @@
 <ul>
 <li>Update of HAL_CRCEx_Polynomial_Set() to return an error when a non-supported polynomial length is passed as parameter</li>
 </ul></li>
-<li><p><strong>HAL CRYP</strong> driver</p>
+<li><strong>HAL CRYP</strong> driver
 <ul>
 <li>Update zero padding management with respect to data type</li>
 <li>Phase setting and comments correction in case of payload phase suspension</li>
@@ -2355,7 +2515,7 @@
 <li>Update of context swap mechanism implemented in HAL_HASH_DMAFeed_ProcessSuspend() when input data are fed to the IP by DMA</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL RCC</strong></p>
 <ul>
@@ -2363,7 +2523,7 @@
 </ul></li>
 <li><p><strong>LL RTC</strong></p>
 <ul>
-<li>Simplication of implementation of function LL_RTC_DATE_Get()</li>
+<li>Simplification of implementation of function LL_RTC_DATE_Get()</li>
 </ul></li>
 <li><p><strong>LL TIM</strong></p>
 <ul>
@@ -2375,12 +2535,12 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">V1.7.1 / 21-April-2017</label>
 <div>
-<h2 id="main-changes-14">Main Changes</h2>
+<h2 id="main-changes-15">Main Changes</h2>
 <ul>
 <li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
 </ul>
-<h2 id="contents-13">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-14">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL generic</strong> driver</p>
 <ul>
@@ -2403,7 +2563,7 @@
 <li>Add wait for synchronization in HAL_RTC_Init() to insure RTC time initialization </li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL ADC</strong></p>
 <ul>
@@ -2419,7 +2579,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">V1.7.0 / 17-February-2017</label>
 <div>
-<h2 id="main-changes-15">Main Changes</h2>
+<h2 id="main-changes-16">Main Changes</h2>
 <ul>
 <li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L496xx/STM32L4A6xx</strong> devices</li>
 <li>New DCMI, DMA2D, HASH peripherals supported in <strong>new HAL DCMI, HAL &amp; LL DMA2D and HAL HASH</strong> drivers</li>
@@ -2428,8 +2588,8 @@
 <li>Superset features device STM32L4A6xx API User Manual available (STM32L4A6xx_User_Manual.chm) <br />
 </li>
 </ul>
-<h2 id="contents-14">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-15">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>HAL DCMI</strong> driver <strong>(NEW)</strong>: stm32l4xx_hal_dcmi.h/.c files</li>
 <li><strong>HAL DMA2D</strong> driver <strong>(NEW)</strong>: stm32l4xx_hal_dma2d.h/.c files</li>
@@ -2451,8 +2611,8 @@
 <li><p><strong>HAL generic</strong> update</p>
 <ul>
 <li><p>stm32l4xx_hal_conf_template.h updated for new HAL DCMI, HAL DMA2D and HAL HASH</p></li>
-<li><p>#define HAL_DCMI_MODULE_ENABLED</p></li>
-<li><p>#define HAL_DMA2D_MODULE_ENABLED</p></li>
+<li>#define HAL_DCMI_MODULE_ENABLED</li>
+<li>#define HAL_DMA2D_MODULE_ENABLED</li>
 <li><p>#define HAL_HASH_MODULE_ENABLED</p></li>
 <li><p>HAL_Delay() updated to guarantee minimum delay</p></li>
 </ul></li>
@@ -2499,7 +2659,7 @@
 <li>Fix peripheral clock management sequence in HAL_SWPMI_Init()</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL DMA2D</strong> driver <strong>(NEW)</strong></p></li>
 <li><p><strong>LL BUS</strong></p>
@@ -2508,7 +2668,7 @@
 </ul></li>
 <li><p><strong>LL PWR</strong></p>
 <ul>
-<li>For compatibility purpose accross STM32 series, rename LL_PWR_IsActiveFlag_VOSF() to LL_PWR_IsActiveFlag_VOS()</li>
+<li>For compatibility purpose across STM32 series, rename LL_PWR_IsActiveFlag_VOSF() to LL_PWR_IsActiveFlag_VOS()</li>
 </ul></li>
 <li><p><strong>LL RCC</strong></p>
 <ul>
@@ -2528,13 +2688,13 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true">V1.6.0 / 28-October-2016</label>
 <div>
-<h2 id="main-changes-16">Main Changes</h2>
+<h2 id="main-changes-17">Main Changes</h2>
 <ul>
 <li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L451xx/STM32L452xx/STM32L462xx</strong> devices</li>
 <li>Superset features device STM32L462xx API User Manual available (STM32L462xx_User_Manual.chm)</li>
 </ul>
-<h2 id="contents-15">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-16">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL CRYP</strong> driver</p>
 <ul>
@@ -2567,7 +2727,7 @@
 <li>HAL ADC, HAL CRC, HAL CRYP, HAL I2C, HAL IRDA, HAL SMARTCARD, HAL SMBUS, HAL OPAMP, HAL RTC, HAL UART, HAL USART</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL I2C</strong> driver</p>
 <ul>
@@ -2580,7 +2740,7 @@
 <li><p><strong>LL TIM</strong> driver</p>
 <ul>
 <li><p>New APIs to insure BDTR register initialization in a single write operation </p></li>
-<li><p>LL_TIM_BDTR_StructInit()</p></li>
+<li>LL_TIM_BDTR_StructInit()</li>
 <li><p>LL_TIM_BDTR_Init()</p></li>
 </ul></li>
 <li><p><strong>LL UTILS</strong> driver</p>
@@ -2592,8 +2752,9 @@
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true">V1.5.2 / 12-September-2016</label>
-<h2 id="contents-16">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<div>
+<h2 id="contents-17">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL ADC</strong> driver</p>
 <ul>
@@ -2646,7 +2807,7 @@
 <li><p><strong>HAL SPI</strong> driver</p>
 <ul>
 <li><p>USE_SPI_CRCcompilation define added to provide the mean to optimize the HAL SPI driver when CRC feature is not used (when CRC is used, application must be changed to set USE_SPI_CRC in stm32l4xx_hal_conf.h (see Inc\stm32l4xx_hal_conf_template.h))</p></li>
-<li><p>Add transfer abort functions and associated callbacks in interrupt mode</p>
+<li>Add transfer abort functions and associated callbacks in interrupt mode
 <ul>
 <li>HAL_SPI_Abort()</li>
 <li>HAL_SPI_Abort_IT()</li>
@@ -2659,20 +2820,20 @@
 </ul></li>
 <li><p><strong>HAL UART</strong> driver</p>
 <ul>
-<li>New APIs to abort UART tranfer with associated callbacks added 
+<li>New APIs to abort UART transfer with associated callbacks added 
 <ul>
 <li>HAL_UART_Abort(), HAL_UART_AbortTransmit(), HAL_UART_AbortReceive(), HAL_UART_Abort_IT(), HAL_UART_AbortTransmit_IT(), HAL_UART_AbortReceive_IT(), HAL_UART_AbortCpltCallback(), HAL_UART_AbortTransmitCpltCallback() and HAL_UART_AbortReceiveCpltCallback()</li>
 </ul></li>
 </ul></li>
 <li><p><strong>HAL USART</strong> driver</p>
 <ul>
-<li><p>New APIs to abort USART tranfer with associated callbacks added</p>
+<li><p>New APIs to abort USART transfer with associated callbacks added</p>
 <ul>
 <li>HAL_USART_Abort(), HAL_USART_Abort_IT() and HAL_USART_AbortCpltCallback()</li>
 </ul></li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL COMP</strong> driver</p>
 <ul>
@@ -2680,10 +2841,12 @@
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V1.5.1 / 31-May-2016</label>
-<h2 id="contents-17">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<div>
+<h2 id="contents-18">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL ADC</strong> driver</p>
 <ul>
@@ -2694,7 +2857,7 @@
 <li>HAL_CRC_DeInit() resets CRC_IDR register to reset value</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><strong>LL BUS</strong> driver
 <ul>
@@ -2706,15 +2869,16 @@
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true">V1.5.0 / 29-April-2016</label>
 <div>
-<h2 id="main-changes-17">Main Changes</h2>
+<h2 id="main-changes-18">Main Changes</h2>
 <ul>
 <li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
 </ul>
-<h2 id="contents-18">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-19">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <p>Enhance HAL delay and timebase implementation</p>
 <ul>
 <li>Add new driver stm32l4xx_hal_timebase_tim_template.c which overrides the native HAL time base functions (defined as weak) to use the TIM peripheral as time base tick source. For more details about the usage of this driver, please refer to HAL\HAL_TimeBase example and FreeRTOS-based applications</li>
@@ -2727,7 +2891,7 @@
 <li><p>RCC_PLLSAI1InitTypeDef includes PLLSAI1Source and PLLSAI1M new fields</p></li>
 <li><p>RCC_PLLSAI2InitTypeDef includes PLLSAI2Source and PLLSAI2M new fields</p></li>
 <li><p>Add missing RTC clock source definition RCC_RTCCLKSOURCE_NO_CLK</p></li>
-<li><p>DFSDM renaming to DFSDM1 (previous definitions preserved for legacy compatibility)</p>
+<li>DFSDM renaming to DFSDM1 (previous definitions preserved for legacy compatibility)
 <ul>
 <li>All macros __HAL_RCC_DFSDM_xxx() renamed to __HAL_RCC_DFSDM1_xxx()</li>
 <li>DfsdmClockSelection field of RCC_PeriphCLKInitTypeDef renamed to Dfsdm1ClockSelection</li>
@@ -2743,7 +2907,7 @@
 <li><p><strong>HAL I2C</strong> driver</p>
 <ul>
 <li><p>Update to avoid waiting on STOPF/BTF/AF flag under DMA ISR by using the PPP end of transfer interrupt in the DMA transfer process. This requires the following updates on user application:</p></li>
-<li><p>Configure and enable the I2Cx IRQ in HAL_I2C_MspInit() function</p></li>
+<li>Configure and enable the I2Cx IRQ in HAL_I2C_MspInit() function</li>
 <li><p>In stm32l4xx_it.c file, I2Cx_IRQHandler() function: add a call to HAL_I2C_IRQHandler() function</p></li>
 </ul></li>
 <li><p><strong>HAL UART/USART</strong> drivers</p>
@@ -2771,9 +2935,9 @@
 </ul></li>
 <li><p><strong>HAL QSPI</strong> driver</p>
 <ul>
-<li><p>Add QSPI error management during DMA process</p></li>
-<li><p>Improve the DMA transmit process by using QSPI TC interrupt instead of waiting on TC flag under DMA ISR</p></li>
-<li><p>These two improvements require the following updates on user application:</p>
+<li>Add QSPI error management during DMA process</li>
+<li>Improve the DMA transmit process by using QSPI TC interrupt instead of waiting on TC flag under DMA ISR</li>
+<li>These two improvements require the following updates on user application:
 <ul>
 <li>Configure and enable the QSPI IRQ in HAL_QSPI_MspInit() function</li>
 <li>In stm32l4xx_it.c file, QSPI_IRQHandler() function: add a call to HAL_QSPI_IRQHandler() function</li>
@@ -2784,11 +2948,11 @@
 <li>Add new callback HAL_QSPI_AbortCpltCallback() to inform user at the end of abort process</li>
 <li>A new value of State in the HAL_QSPI_StateTypeDef provides the current state during the abort phase</li>
 </ul></li>
-<li><p>Polling management update:</p>
+<li>Polling management update:
 <ul>
 <li>The user Timeout value must be estimated for the overall process duration</li>
 </ul></li>
-<li><p>Fix wrong data size management in HAL_QSPI_Receive_DMA()</p>
+<li>Fix wrong data size management in HAL_QSPI_Receive_DMA()
 <ul>
 <li>New API HAL_QSPI_SetFifoThreshold() and HAL_QSPI_GetFifoThreshold()</li>
 </ul></li>
@@ -2818,14 +2982,14 @@
 <li><p><strong>HAL DMA</strong> driver</p>
 <ul>
 <li><p>Global driver code optimization to reduce memory footprint </p></li>
-<li><p>New APIs HAL_DMA_RegisterCallback() and HAL_DMA_UnRegisterCallback() to register/unregister the different possible callbacks identified by enum typedef HAL_DMA_CallbackIDTypeDef</p></li>
-<li><p>New API HAL_DMA_Abort_IT() to abort DMA transfer in non-blocking mode for interrupt context</p></li>
-<li><p>The new registered Abort callback is called when DMA transfer abortion is completed</p></li>
-<li><p>Add new Error Codes: HAL_DMA_ERROR_NO_XFER and HAL_DMA_ERROR_NOT_SUPPORTED</p></li>
+<li>New APIs HAL_DMA_RegisterCallback() and HAL_DMA_UnRegisterCallback() to register/unregister the different possible callbacks identified by enum typedef HAL_DMA_CallbackIDTypeDef</li>
+<li>New API HAL_DMA_Abort_IT() to abort DMA transfer in non-blocking mode for interrupt context</li>
+<li>The new registered Abort callback is called when DMA transfer abortion is completed</li>
+<li>Add new Error Codes: HAL_DMA_ERROR_NO_XFER and HAL_DMA_ERROR_NOT_SUPPORTED</li>
 <li><p>Add __HAL_DMA_GET_COUNTER() macro<br />
 </p></li>
 </ul></li>
-<li><p><strong>HAL COMP</strong> driver</p>
+<li><strong>HAL COMP</strong> driver
 <ul>
 <li>EXTI configuration done in HAL_COMP_Init() based on TriggerMode field of COMP_InitTypeDef structure; HAL_COMP_Start()/HAL_COMP_Stop() APIs are sufficient to start and stop comparators (HAL_COMP_Start_IT() and HAL_COMP_Stop_IT() are preserved for legacy compatibility)</li>
 <li>Add comparator startup time and scaler bridge stabilization time in HAL_COMP_Init()</li>
@@ -2846,7 +3010,7 @@
 <li>COMP_BLANKINGSRCE_NONE renamed to COMP_BLANKINGSRC_NONE</li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL CRYP</strong> driver</p>
+<li><strong>HAL CRYP</strong> driver
 <ul>
 <li>Software workaround for AES issue on GCM encryption with payload length not a multiple of 128 bits</li>
 <li>Add support of payload length not multiple of 32 bits<br />
@@ -2861,7 +3025,7 @@
 </li>
 </ul></li>
 </ul></li>
-<li><p><strong>HAL HCD</strong> driver</p>
+<li><strong>HAL HCD</strong> driver
 <ul>
 <li>Clear NACK flag before re-enabling the channel for new IN request</li>
 </ul></li>
@@ -2893,18 +3057,18 @@
 <li>Update initialization sequence in voltage class B</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
-<li><p><strong>LL ADC</strong> driver</p>
+<li><strong>LL ADC</strong> driver
 <ul>
 <li>Fix injected conversion configuration with SW start in LL_ADC_INJ_ConfigQueueContext()</li>
 </ul></li>
-<li><p><strong>LL BUS</strong> driver</p>
+<li><strong>LL BUS</strong> driver
 <ul>
 <li>DFSDM renaming to DFSDM1 (previous definitions preserved for legacy compatibility)</li>
 <li>LL_APB2_GRP1_PERIPH_DFSDM renamed to LL_APB2_GRP1_PERIPH_DFSDM1</li>
 </ul></li>
-<li><p><strong>LL COMP</strong> driver</p>
+<li><strong>LL COMP</strong> driver
 <ul>
 <li>Window mode renaming to highlight Comparator instances connection (previous definitions preserved for legacy compatibility)</li>
 <li>LL_COMP_WINDOWMODE_ENABLE renamed to LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON<br />
@@ -2917,7 +3081,7 @@
 <li>LL_COMP_BLANKINGSRCE_TIM8OC5 renamed to LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2</li>
 <li>LL_COMP_BLANKINGSRCE_TIM15OC1 renamed to LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2</li>
 </ul></li>
-<li><p><strong>LL I2C</strong> driver</p>
+<li><strong>LL I2C</strong> driver
 <ul>
 <li>Add SMBus feature support
 <ul>
@@ -2933,7 +3097,7 @@
 <li>New APIs LL_I2C_GenerateStopCondition(), L_I2C_GenerateStartCondition()</li>
 <li>New APIs LL_I2C_EnableAuto10BitRead(), LL_I2C_DisableAuto10BitRead() and LL_I2C_IsEnabledAuto10BitRead()</li>
 </ul></li>
-<li><p><strong>LL PWR</strong> driver</p>
+<li><strong>LL PWR</strong> driver
 <ul>
 <li>New APIs LL_PWR_EnterLowPowerRunMode() and LL_PWR_ExitLowPowerRunMode()</li>
 </ul></li>
@@ -2946,7 +3110,7 @@
 </ul></li>
 <li><p><strong>LL SYSTEM</strong> driver</p></li>
 <li><p>New API LL_FLASH_IsPrefetchEnabled()</p></li>
-<li><p><strong>LL TIM</strong> driver</p>
+<li><strong>LL TIM</strong> driver
 <ul>
 <li>DFSDM renaming to DFSDM1 (previous definitions preserved for legacy compatibility)</li>
 <li>LL_TIM_BKIN_SOURCE_DFBK renamed to LL_TIM_BKIN_SOURCE_DF1BK</li>
@@ -2959,7 +3123,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section14" aria-hidden="true"> <label for="collapse-section14" aria-hidden="true">V1.4.0 / 26-February-2016</label>
 <div>
-<h2 id="main-changes-18">Main Changes</h2>
+<h2 id="main-changes-19">Main Changes</h2>
 <ul>
 <li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L431xx/STM32L432xx/STM32L433xx/STM32L442xx/STM32L443xx</strong> devices</li>
 <li><strong>Low Layer driver initialization/de-initialization APIs</strong> applicable to all STM32L4xx devices</li>
@@ -2967,14 +3131,14 @@
 <li>Superset features device STM32L443xx API User Manual available (STM32L443xx_User_Manual.chm) <br />
 </li>
 </ul>
-<h2 id="contents-19">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-20">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL</strong> generic update</p>
 <ul>
 <li>Add default HSI48_VALUE in stm32l4xx_hal_conf_template</li>
 </ul></li>
-<li><p><strong>HAL CRYP</strong> update</p>
+<li><strong>HAL CRYP</strong> update
 <ul>
 <li>New error code HAL_CRYP_BUSY_ERROR to reject new request while ongoing processing</li>
 </ul></li>
@@ -2983,13 +3147,13 @@
 <li>Improvement of baud rate computation at initialization</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
-<li><p>New C files requiring to use USE_FULL_LL_DRIVER compilation switch in user project to benefit from new APIs</p>
+<li>New C files requiring to use USE_FULL_LL_DRIVER compilation switch in user project to benefit from new APIs
 <ul>
 <li>stm32l4xx_ll_crs.c</li>
 </ul></li>
-<li><p><strong>LL BUS</strong> update</p>
+<li><strong>LL BUS</strong> update
 <ul>
 <li>Add read-back register on clock enable functions to take into account any delay on bus</li>
 </ul></li>
@@ -3008,7 +3172,7 @@
 <li>LL_ADC_OVS_DATA_SHIFT_xxx renamed to LL_ADC_OVS_SHIFT_xxx</li>
 </ul></li>
 </ul></li>
-<li><p><strong>LL DAC</strong> update</p>
+<li><strong>LL DAC</strong> update
 <ul>
 <li><p>Trigger sources renaming:</p>
 <ul>
@@ -3017,11 +3181,11 @@
 <li>LL_DAC_TRIGGER_EXT_IT9 renamed to LL_DAC_TRIG_EXT_EXTI_LINE9</li>
 </ul></li>
 </ul></li>
-<li><p><strong>LL LPUART</strong> update</p>
+<li><strong>LL LPUART</strong> update
 <ul>
 <li>Improvement of LPUARTDIV value in baud rate computation in __LL_LPUART_DIV() macro</li>
 </ul></li>
-<li><p><strong>LL USART</strong> update</p>
+<li><strong>LL USART</strong> update
 <ul>
 <li>Improvement of USARTDIV value in baud rate computation in __LL_USART_DIV_SAMPLING8() and __LL_USART_DIV_SAMPLING16() macros</li>
 </ul></li>
@@ -3031,7 +3195,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section15" aria-hidden="true"> <label for="collapse-section15" aria-hidden="true">V1.3.0 / 29-January-2016</label>
 <div>
-<h2 id="main-changes-19">Main Changes</h2>
+<h2 id="main-changes-20">Main Changes</h2>
 <ul>
 <li><strong>New Low Layer driver initialization/de-initialization APIs</strong>
 <ul>
@@ -3044,8 +3208,8 @@
 </ul></li>
 <li>Fix "parameter unused" GCC compilation warnings on __weak functions</li>
 </ul>
-<h2 id="contents-20">Contents</h2>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></u></strong></p>
+<h2 id="contents-21">Contents</h2>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>HAL generic</strong> update</p>
 <ul>
@@ -3108,7 +3272,7 @@
 <li>Add missing USART_STOPBITS_0_5 definition for frame with 0.5 stop bit</li>
 </ul></li>
 </ul>
-<p><strong><u><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></u></strong></p>
+<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">LL drivers changes</span></span></strong></p>
 <ul>
 <li><p><strong>LL UTILS</strong> update (user code impacted!)</p>
 <ul>
@@ -3191,13 +3355,14 @@
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section16" aria-hidden="true"> <label for="collapse-section16" aria-hidden="true">V1.2.0 / 25-November-2015</label>
-<h2 id="main-changes-20">Main Changes</h2>
+<div>
+<h2 id="main-changes-21">Main Changes</h2>
 <ul>
-<li><p><strong>HAL generic</strong> update</p>
+<li><strong>HAL generic</strong> update
 <ul>
 <li>Reduce default HSE startup timeout value to 100ms in Inc\stm32l4xx_hal_conf_template.h file</li>
 </ul></li>
-<li><p><strong>HAL PWR</strong> update (User application code impacted)</p>
+<li><strong>HAL PWR</strong> update (User application code impacted)
 <ul>
 <li>Stop 1 with main regulator renamed into Stop 0, to be aligned with latest version of Reference Manual</li>
 <li>Change HAL_PWREx_EnterSTOP1Mode(uint32_t Regulator, uint8_t STOPEntry) into HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry)</li>
@@ -3209,10 +3374,10 @@
 <ul>
 <li>Provide capability to run calibration despite PGA mode by switching temporary to standalone mode</li>
 </ul></li>
-<li><p><strong>HAL SAI</strong> update</p>
+<li><strong>HAL SAI</strong> update
 <ul>
 <li><p>update SAI block synchronization selection (User application code impacted)</p></li>
-<li><p>Replace uncomplete SAI_SYNCHRONOUS_EXT value for with SAI_SYNCHRONOUS_EXT_SAI1 and SAI_SYNCHRONOUS_EXT_SAI2</p></li>
+<li><p>Replace incomplete SAI_SYNCHRONOUS_EXT value for with SAI_SYNCHRONOUS_EXT_SAI1 and SAI_SYNCHRONOUS_EXT_SAI2</p></li>
 <li><p>Update external synchronization input selection (User application code impacted)</p></li>
 <li><p>Remove useless SAI_SYNCEXT_IN_ENABLE value for SynchroExt field in SAI_InitTypeDef structure</p></li>
 <li><p>Add support of 24bits configuration in PCM protocol</p></li>
@@ -3221,7 +3386,7 @@
 <li><p>Fix mute counter setting in HAL_SAI_EnableRxMuteMode()</p></li>
 <li><p>Fix ambiguous clock strobing values: fix HAL_SAI_Init() to set correct CKSTR bits in SAI_xCR1 according to ClockStrobing and AudioMode parameters</p></li>
 <li><p>Fill in the Fifo before enable interrupt in HAL_SAI_Transmit_IT()</p></li>
-<li><p>Fix assert on active slot selection in HAL_SAI_Init()</p></li>
+<li>Fix assert on active slot selection in HAL_SAI_Init()</li>
 <li><p>Fix companding mode management in HAL_SAI_Init()<br />
 </p></li>
 </ul></li>
@@ -3244,9 +3409,11 @@
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section17" aria-hidden="true"> <label for="collapse-section17" aria-hidden="true">V1.1.1 / 16-October-2015</label>
-<h2 id="main-changes-21">Main Changes</h2>
+<div>
+<h2 id="main-changes-22">Main Changes</h2>
 <ul>
 <li><p><strong>HAL generic</strong> update</p>
 <ul>
@@ -3272,18 +3439,19 @@
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section20" aria-hidden="true"> <label for="collapse-section20" aria-hidden="true">V1.1.0 / 26-September-2015</label>
 <div>
-<h2 id="main-changes-22">Main Changes</h2>
+<h2 id="main-changes-23">Main Changes</h2>
 <p><strong>Add Low Layer drivers allowing performance and footprint optimization</strong></p>
 <ul>
-<li><p>Low Layer drivers APIs provide register level programming: they require deep knowledge of peripherals described in STM32L4x6 Reference Manual</p></li>
-<li><p>Low Layer drivers are available for: ADC, COMP, Cortex, CRC, DAC, DMA, EXTI, GPIO, I2C, IWDG, LPYIM, LPUART, OPAMP, PWR, RCC, RNG, RTC, SPI, SWPMI, TIM, USART, WWDG peripherals and additionnal Low Level Bus, System and Utilities APIs.<br />
+<li>Low Layer drivers APIs provide register level programming: they require deep knowledge of peripherals described in STM32L4x6 Reference Manual</li>
+<li><p>Low Layer drivers are available for: ADC, COMP, Cortex, CRC, DAC, DMA, EXTI, GPIO, I2C, IWDG, LPYIM, LPUART, OPAMP, PWR, RCC, RNG, RTC, SPI, SWPMI, TIM, USART, WWDG peripherals and additional Low Level Bus, System and Utilities APIs.<br />
 </p></li>
 <li><p>Low Layer drivers APIs are implemented as static inline function in new Inc/stm32l4xx_ll_ppp.h files for PPP peripherals, there is no configuration file and each stm32l4xx_ll_ppp.h file must be included in user code.</p></li>
 </ul>
-<h2 id="contents-21">Contents</h2>
+<h2 id="contents-22">Contents</h2>
 <ul>
 <li><p><strong>HAL ADC</strong> update</p>
 <ul>
@@ -3321,13 +3489,13 @@
 </ul></li>
 <li><p><strong>HAL RCC</strong> update</p>
 <ul>
-<li><p>Add LSE Clock Security System (CSS) management with new APIs: HAL_RCCEx_EnableLSECSS_IT(), HAL_RCCEx_LSECSS_IRQHandler() and HAL_RCCEx_LSECSS_Callback()</p></li>
-<li><p>Add RCC_MCO1SOURCE_NOCLOCK to provide capability to disable MCO output in HAL_RCC_MCOConfig()</p></li>
-<li><p>Update HAL_RCC_OscConfig() and HAL_RCCEx_PeriphCLKConfig() to keep backup domain enabled when configuring respectively LSE and RTC clock source</p></li>
-<li><p>Update HAL_RCCEx_DisablePLLSAI1() and HAL_RCCEx_DisablePLLSAI2() to disable respectively PLLSAI1 and PLLSAI2 clock outputs</p></li>
+<li>Add LSE Clock Security System (CSS) management with new APIs: HAL_RCCEx_EnableLSECSS_IT(), HAL_RCCEx_LSECSS_IRQHandler() and HAL_RCCEx_LSECSS_Callback()</li>
+<li>Add RCC_MCO1SOURCE_NOCLOCK to provide capability to disable MCO output in HAL_RCC_MCOConfig()</li>
+<li>Update HAL_RCC_OscConfig() and HAL_RCCEx_PeriphCLKConfig() to keep backup domain enabled when configuring respectively LSE and RTC clock source</li>
+<li>Update HAL_RCCEx_DisablePLLSAI1() and HAL_RCCEx_DisablePLLSAI2() to disable respectively PLLSAI1 and PLLSAI2 clock outputs</li>
 <li><p>Update HAL_RCCEx_GetPeriphCLKFreq() to return the frequency in Hz applied to peripherals via HAL_RCCEx_PeriphCLKConfig()<br />
 </p></li>
-<li><p>Update HAL_RCC_DeInit() to set default MSI range</p></li>
+<li>Update HAL_RCC_DeInit() to set default MSI range</li>
 <li><p>Remove old workaround on LSE drive medium configuration values</p></li>
 </ul></li>
 <li><p><strong>HAL SPI</strong> update</p>
@@ -3347,12 +3515,14 @@
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section18" aria-hidden="true"> <label for="collapse-section18" aria-hidden="true">V1.0.0 / 26-June-2015</label>
-<h2 id="main-changes-23">Main Changes</h2>
+<div>
+<h2 id="main-changes-24">Main Changes</h2>
 <ul>
 <li>First official release of <strong>STM32L4xx HAL Drivers</strong> for <strong>STM32L471xx/STM32L475xx/STM32L476xx/STM32L485xx</strong> and <strong>STM32L486xx</strong> devices</li>
 </ul>
 </div>
-</section>
+</div>
+</div>
 </div>
 <footer class="sticky">
 <p>For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <a href="http://www.st.com/STM32">http://www.st.com/STM32</a></p>
diff --git a/Src/stm32l4xx_hal.c b/Src/stm32l4xx_hal.c
index 0c0a6ba..87385fc 100644
--- a/Src/stm32l4xx_hal.c
+++ b/Src/stm32l4xx_hal.c
@@ -53,7 +53,7 @@
    */
 #define STM32L4XX_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
 #define STM32L4XX_HAL_VERSION_SUB1   (0x0DU) /*!< [23:16] sub1 version */
-#define STM32L4XX_HAL_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */
+#define STM32L4XX_HAL_VERSION_SUB2   (0x04U) /*!< [15:8]  sub2 version */
 #define STM32L4XX_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define STM32L4XX_HAL_VERSION        ((STM32L4XX_HAL_VERSION_MAIN  << 24U)\
                                       |(STM32L4XX_HAL_VERSION_SUB1 << 16U)\
diff --git a/Src/stm32l4xx_hal_adc.c b/Src/stm32l4xx_hal_adc.c
index 962c384..719bc01 100644
--- a/Src/stm32l4xx_hal_adc.c
+++ b/Src/stm32l4xx_hal_adc.c
@@ -220,11 +220,11 @@
 
      The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1,
      allows the user to configure dynamically the driver callbacks.
-     Use Functions HAL_ADC_RegisterCallback()
+     Use Functions @ref HAL_ADC_RegisterCallback()
      to register an interrupt callback.
     [..]
 
-     Function HAL_ADC_RegisterCallback() allows to register following callbacks:
+     Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks:
        (+) ConvCpltCallback               : ADC conversion complete callback
        (+) ConvHalfCpltCallback           : ADC conversion DMA half-transfer callback
        (+) LevelOutOfWindowCallback       : ADC analog watchdog 1 callback
@@ -240,11 +240,11 @@
      and a pointer to the user callback function.
     [..]
 
-     Use function HAL_ADC_UnRegisterCallback to reset a callback to the default
+     Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default
      weak function.
     [..]
 
-     HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle,
+     @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle,
      and the Callback ID.
      This function allows to reset following callbacks:
        (+) ConvCpltCallback               : ADC conversion complete callback
@@ -260,27 +260,27 @@
        (+) MspDeInitCallback              : ADC Msp DeInit callback
      [..]
 
-     By default, after the HAL_ADC_Init() and when the state is HAL_ADC_STATE_RESET
+     By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET
      all callbacks are set to the corresponding weak functions:
-     examples HAL_ADC_ConvCpltCallback(), HAL_ADC_ErrorCallback().
+     examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback().
      Exception done for MspInit and MspDeInit functions that are
-     reset to the legacy weak functions in the HAL_ADC_Init()/ HAL_ADC_DeInit() only when
+     reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when
      these callbacks are null (not registered beforehand).
     [..]
 
-     If MspInit or MspDeInit are not null, the HAL_ADC_Init()/ HAL_ADC_DeInit()
+     If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit()
      keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
      [..]
 
-     Callbacks can be registered/unregistered in HAL_ADC_STATE_READY state only.
+     Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only.
      Exception done MspInit/MspDeInit functions that can be registered/unregistered
-     in HAL_ADC_STATE_READY or HAL_ADC_STATE_RESET state,
+     in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state,
      thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
     [..]
 
      Then, the user first registers the MspInit/MspDeInit user callbacks
-     using HAL_ADC_RegisterCallback() before calling HAL_ADC_DeInit()
-     or HAL_ADC_Init() function.
+     using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit()
+     or @ref HAL_ADC_Init() function.
      [..]
 
      When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or
@@ -312,10 +312,11 @@
   * @{
   */
 
-#define ADC_CFGR_FIELDS_1  ((ADC_CFGR_RES    | ADC_CFGR_ALIGN   |\
-                             ADC_CFGR_CONT   | ADC_CFGR_OVRMOD  |\
-                             ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM |\
-                             ADC_CFGR_EXTEN  | ADC_CFGR_EXTSEL))   /*!< ADC_CFGR fields of parameters that can be updated when no regular conversion is on-going */
+#define ADC_CFGR_FIELDS_1 (ADC_CFGR_RES    | ADC_CFGR_ALIGN   |\
+                           ADC_CFGR_CONT   | ADC_CFGR_OVRMOD  |\
+                           ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM |\
+                           ADC_CFGR_EXTEN  | ADC_CFGR_EXTSEL)              /*!< ADC_CFGR fields of parameters that can
+                          be updated when no regular conversion is on-going */
 
 /* Timeout values for ADC operations (enable settling time,                   */
 /*   disable settling time, ...).                                             */
@@ -393,11 +394,10 @@
 HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc)
 {
   HAL_StatusTypeDef tmp_hal_status = HAL_OK;
-  uint32_t tmpCFGR;
-  uint32_t tmp_adc_reg_is_conversion_on_going;
-  __IO uint32_t wait_loop_index = 0UL;
+  uint32_t tmp_cfgr;
   uint32_t tmp_adc_is_conversion_on_going_regular;
   uint32_t tmp_adc_is_conversion_on_going_injected;
+  __IO uint32_t wait_loop_index = 0UL;
 
   /* Check ADC handle */
   if (hadc == NULL)
@@ -411,7 +411,7 @@
   assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
 #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0)
   assert_param(IS_ADC_DFSDMCFG_MODE(hadc));
-#endif
+#endif /* DFSDM */
   assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
   assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode));
   assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
@@ -516,10 +516,10 @@
   /* correctly completed and if there is no conversion on going on regular    */
   /* group (ADC may already be enabled at this point if HAL_ADC_Init() is     */
   /* called to update a parameter on the fly).                                */
-  tmp_adc_reg_is_conversion_on_going = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
+  tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
 
   if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL)
-      && (tmp_adc_reg_is_conversion_on_going == 0UL)
+      && (tmp_adc_is_conversion_on_going_regular == 0UL)
      )
   {
     /* Set ADC state */
@@ -566,15 +566,15 @@
     /*  - overrun                                  Init.Overrun               */
     /*  - discontinuous mode                       Init.DiscontinuousConvMode */
     /*  - discontinuous mode channel count         Init.NbrOfDiscConversion   */
-    tmpCFGR  = (ADC_CFGR_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode)           |
-                hadc->Init.Overrun                                                     |
-                hadc->Init.DataAlign                                                   |
-                hadc->Init.Resolution                                                  |
-                ADC_CFGR_REG_DISCONTINUOUS((uint32_t)hadc->Init.DiscontinuousConvMode));
+    tmp_cfgr  = (ADC_CFGR_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode)           |
+                 hadc->Init.Overrun                                                     |
+                 hadc->Init.DataAlign                                                   |
+                 hadc->Init.Resolution                                                  |
+                 ADC_CFGR_REG_DISCONTINUOUS((uint32_t)hadc->Init.DiscontinuousConvMode));
 
     if (hadc->Init.DiscontinuousConvMode == ENABLE)
     {
-      tmpCFGR |= ADC_CFGR_DISCONTINUOUS_NUM(hadc->Init.NbrOfDiscConversion);
+      tmp_cfgr |= ADC_CFGR_DISCONTINUOUS_NUM(hadc->Init.NbrOfDiscConversion);
     }
 
     /* Enable external trigger if trigger selection is different of software  */
@@ -584,13 +584,13 @@
     /*       software start.                                                  */
     if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
     {
-      tmpCFGR |= ((hadc->Init.ExternalTrigConv & ADC_CFGR_EXTSEL)
-                  | hadc->Init.ExternalTrigConvEdge
-                 );
+      tmp_cfgr |= ((hadc->Init.ExternalTrigConv & ADC_CFGR_EXTSEL)
+                   | hadc->Init.ExternalTrigConvEdge
+                  );
     }
 
     /* Update Configuration Register CFGR */
-    MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_1, tmpCFGR);
+    MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_1, tmp_cfgr);
 
     /* Parameters update conditioned to ADC state:                            */
     /* Parameters that can be updated when ADC is disabled or enabled without */
@@ -598,17 +598,16 @@
     /*  - DMA continuous request          Init.DMAContinuousRequests          */
     /*  - LowPowerAutoWait feature        Init.LowPowerAutoWait               */
     /*  - Oversampling parameters         Init.Oversampling                   */
-    tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
     tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance);
     if ((tmp_adc_is_conversion_on_going_regular == 0UL)
         && (tmp_adc_is_conversion_on_going_injected == 0UL)
        )
     {
-      tmpCFGR = (ADC_CFGR_DFSDM(hadc)                                            |
-                 ADC_CFGR_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait)        |
-                 ADC_CFGR_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests));
+      tmp_cfgr = (ADC_CFGR_DFSDM(hadc)                                            |
+                   ADC_CFGR_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait)        |
+                   ADC_CFGR_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests));
 
-      MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_2, tmpCFGR);
+      MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_2, tmp_cfgr);
 
       if (hadc->Init.OversamplingMode == ENABLE)
       {
@@ -1207,7 +1206,7 @@
 #if defined(ADC_MULTIMODE_SUPPORT)
   const ADC_TypeDef *tmpADC_Master;
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -1241,7 +1240,7 @@
       {
         CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE);
       }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
       /* Set ADC error code */
       /* Check if a conversion is on going on ADC group injected */
@@ -1310,7 +1309,7 @@
 
       /* Start ADC group regular conversion */
       LL_ADC_REG_StartConversion(hadc->Instance);
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
     }
     else
     {
@@ -1398,7 +1397,7 @@
 #if defined(ADC_MULTIMODE_SUPPORT)
   const ADC_TypeDef *tmpADC_Master;
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -1458,7 +1457,7 @@
     {
       tmp_Flag_End = (ADC_FLAG_EOC);
     }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
   }
 
   /* Get tick count */
@@ -1531,7 +1530,7 @@
 #else
   /* Retrieve handle ADC CFGR register */
   tmp_cfgr = READ_REG(hadc->Instance->CFGR);
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Clear polled flag */
   if (tmp_Flag_End == ADC_FLAG_EOS)
@@ -1559,9 +1558,12 @@
   * @param EventType the ADC event type.
   *          This parameter can be one of the following values:
   *            @arg @ref ADC_EOSMP_EVENT  ADC End of Sampling event
-  *            @arg @ref ADC_AWD1_EVENT   ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 devices)
-  *            @arg @ref ADC_AWD2_EVENT   ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 families)
-  *            @arg @ref ADC_AWD3_EVENT   ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 families)
+  *            @arg @ref ADC_AWD1_EVENT   ADC Analog watchdog 1 event (main analog watchdog, present on
+  *                                       all STM32 series)
+  *            @arg @ref ADC_AWD2_EVENT   ADC Analog watchdog 2 event (additional analog watchdog, not present on
+  *                                       all STM32 series)
+  *            @arg @ref ADC_AWD3_EVENT   ADC Analog watchdog 3 event (additional analog watchdog, not present on
+  *                                       all STM32 series)
   *            @arg @ref ADC_OVR_EVENT    ADC Overrun event
   *            @arg @ref ADC_JQOVF_EVENT  ADC Injected context queue overflow event
   * @param Timeout Timeout value in millisecond.
@@ -1728,7 +1730,7 @@
 #if defined(ADC_MULTIMODE_SUPPORT)
   const ADC_TypeDef *tmpADC_Master;
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -1762,7 +1764,7 @@
       {
         CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE);
       }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
       /* Set ADC error code */
       /* Check if a conversion is on going on ADC group injected */
@@ -1904,7 +1906,7 @@
 
       /* Start ADC group regular conversion */
       LL_ADC_REG_StartConversion(hadc->Instance);
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
     }
     else
     {
@@ -1987,7 +1989,7 @@
   HAL_StatusTypeDef tmp_hal_status;
 #if defined(ADC_MULTIMODE_SUPPORT)
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -2031,7 +2033,7 @@
         {
           CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE);
         }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
         /* Check if a conversion is on going on ADC group injected */
         if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) != 0UL)
@@ -2100,7 +2102,7 @@
       /* Process unlocked */
       __HAL_UNLOCK(hadc);
     }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
   }
   else
   {
@@ -2209,7 +2211,7 @@
   * @param hadc ADC handle
   * @retval ADC group regular conversion data
   */
-uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc)
+uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc)
 {
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -2237,7 +2239,7 @@
 #if defined(ADC_MULTIMODE_SUPPORT)
   const ADC_TypeDef *tmpADC_Master;
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -2301,7 +2303,7 @@
       }
 #else
       tmp_cfgr = READ_REG(hadc->Instance->CFGR);
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
       /* Carry on if continuous mode is disabled */
       if (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) != ADC_CFGR_CONT)
@@ -2391,7 +2393,7 @@
     }
 #else
     tmp_cfgr = READ_REG(hadc->Instance->CFGR);
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
     /* Disable interruption if no further conversion upcoming by injected     */
     /* external trigger or by automatic injected conversion with regular      */
@@ -2537,7 +2539,7 @@
         }
       }
       else
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
       {
         /* Multimode not set or feature not available or ADC independent */
         if ((hadc->Instance->CFGR & ADC_CFGR_DMAEN) != 0UL)
@@ -2693,10 +2695,10 @@
   *         The setting of these parameters is conditioned to ADC state:
   *         Refer to comments of structure "ADC_ChannelConfTypeDef".
   * @param hadc ADC handle
-  * @param sConfig Structure of ADC channel assigned to ADC group regular.
+  * @param pConfig Structure of ADC channel assigned to ADC group regular.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig)
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *pConfig)
 {
   HAL_StatusTypeDef tmp_hal_status = HAL_OK;
   uint32_t tmpOffsetShifted;
@@ -2707,24 +2709,24 @@
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
-  assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
-  assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
-  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(sConfig->SingleDiff));
-  assert_param(IS_ADC_OFFSET_NUMBER(sConfig->OffsetNumber));
-  assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), sConfig->Offset));
+  assert_param(IS_ADC_REGULAR_RANK(pConfig->Rank));
+  assert_param(IS_ADC_SAMPLE_TIME(pConfig->SamplingTime));
+  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(pConfig->SingleDiff));
+  assert_param(IS_ADC_OFFSET_NUMBER(pConfig->OffsetNumber));
+  assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pConfig->Offset));
 
   /* if ROVSE is set, the value of the OFFSETy_EN bit in ADCx_OFRy register is
      ignored (considered as reset) */
-  assert_param(!((sConfig->OffsetNumber != ADC_OFFSET_NONE) && (hadc->Init.OversamplingMode == ENABLE)));
+  assert_param(!((pConfig->OffsetNumber != ADC_OFFSET_NONE) && (hadc->Init.OversamplingMode == ENABLE)));
 
   /* Verification of channel number */
-  if (sConfig->SingleDiff != ADC_DIFFERENTIAL_ENDED)
+  if (pConfig->SingleDiff != ADC_DIFFERENTIAL_ENDED)
   {
-    assert_param(IS_ADC_CHANNEL(hadc, sConfig->Channel));
+    assert_param(IS_ADC_CHANNEL(hadc, pConfig->Channel));
   }
   else
   {
-    assert_param(IS_ADC_DIFF_CHANNEL(hadc, sConfig->Channel));
+    assert_param(IS_ADC_DIFF_CHANNEL(hadc, pConfig->Channel));
   }
 
   /* Process locked */
@@ -2738,37 +2740,40 @@
   if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
   {
 #if !defined (USE_FULL_ASSERT)
+    uint32_t config_rank = pConfig->Rank;
     /* Correspondence for compatibility with legacy definition of             */
     /* sequencer ranks in direct number format. This correspondence can       */
     /* be done only on ranks 1 to 5 due to literal values.                    */
     /* Note: Sequencer ranks in direct number format are no more used         */
     /*       and are detected by activating USE_FULL_ASSERT feature.          */
-    if (sConfig->Rank <= 5U)
+    if (pConfig->Rank <= 5U)
     {
-      switch (sConfig->Rank)
+      switch (pConfig->Rank)
       {
         case 2U:
-          sConfig->Rank = ADC_REGULAR_RANK_2;
+          config_rank = ADC_REGULAR_RANK_2;
           break;
         case 3U:
-          sConfig->Rank = ADC_REGULAR_RANK_3;
+          config_rank = ADC_REGULAR_RANK_3;
           break;
         case 4U:
-          sConfig->Rank = ADC_REGULAR_RANK_4;
+          config_rank = ADC_REGULAR_RANK_4;
           break;
         case 5U:
-          sConfig->Rank = ADC_REGULAR_RANK_5;
+          config_rank = ADC_REGULAR_RANK_5;
           break;
         /* case 1U */
         default:
-          sConfig->Rank = ADC_REGULAR_RANK_1;
+          config_rank = ADC_REGULAR_RANK_1;
           break;
       }
     }
-#endif
-
     /* Set ADC group regular sequence: channel on the selected scan sequence rank */
-    LL_ADC_REG_SetSequencerRanks(hadc->Instance, sConfig->Rank, sConfig->Channel);
+    LL_ADC_REG_SetSequencerRanks(hadc->Instance, config_rank, pConfig->Channel);
+#else
+    /* Set ADC group regular sequence: channel on the selected scan sequence rank */
+    LL_ADC_REG_SetSequencerRanks(hadc->Instance, pConfig->Rank, pConfig->Channel);
+#endif/* USE_FULL_ASSERT */
 
     /* Parameters update conditioned to ADC state:                              */
     /* Parameters that can be updated when ADC is disabled or enabled without   */
@@ -2783,10 +2788,10 @@
     {
 #if defined(ADC_SMPR1_SMPPLUS)
       /* Manage specific case of sampling time 3.5 cycles replacing 2.5 cyles */
-      if (sConfig->SamplingTime == ADC_SAMPLETIME_3CYCLES_5)
+      if (pConfig->SamplingTime == ADC_SAMPLETIME_3CYCLES_5)
       {
         /* Set sampling time of the selected ADC channel */
-        LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, LL_ADC_SAMPLINGTIME_2CYCLES_5);
+        LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, LL_ADC_SAMPLINGTIME_2CYCLES_5);
 
         /* Set ADC sampling time common configuration */
         LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5);
@@ -2794,26 +2799,26 @@
       else
       {
         /* Set sampling time of the selected ADC channel */
-        LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime);
+        LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, pConfig->SamplingTime);
 
         /* Set ADC sampling time common configuration */
         LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_DEFAULT);
       }
 #else
       /* Set sampling time of the selected ADC channel */
-      LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime);
-#endif
+      LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, pConfig->SamplingTime);
+#endif /* ADC_SMPR1_SMPPLUS */
 
       /* Configure the offset: offset enable/disable, channel, offset value */
 
       /* Shift the offset with respect to the selected ADC resolution. */
       /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */
-      tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, (uint32_t)sConfig->Offset);
+      tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, (uint32_t)pConfig->Offset);
 
-      if (sConfig->OffsetNumber != ADC_OFFSET_NONE)
+      if (pConfig->OffsetNumber != ADC_OFFSET_NONE)
       {
         /* Set ADC selected offset number */
-        LL_ADC_SetOffset(hadc->Instance, sConfig->OffsetNumber, sConfig->Channel, tmpOffsetShifted);
+        LL_ADC_SetOffset(hadc->Instance, pConfig->OffsetNumber, pConfig->Channel, tmpOffsetShifted);
 
       }
       else
@@ -2821,22 +2826,22 @@
         /* Scan each offset register to check if the selected channel is targeted. */
         /* If this is the case, the corresponding offset number is disabled.       */
         if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_1))
-            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel))
+            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel))
         {
           LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE);
         }
         if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_2))
-            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel))
+            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel))
         {
           LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE);
         }
         if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_3))
-            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel))
+            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel))
         {
           LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE);
         }
         if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_4))
-            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel))
+            == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel))
         {
           LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE);
         }
@@ -2849,16 +2854,18 @@
     if (LL_ADC_IsEnabled(hadc->Instance) == 0UL)
     {
       /* Set mode single-ended or differential input of the selected ADC channel */
-      LL_ADC_SetChannelSingleDiff(hadc->Instance, sConfig->Channel, sConfig->SingleDiff);
+      LL_ADC_SetChannelSingleDiff(hadc->Instance, pConfig->Channel, pConfig->SingleDiff);
 
       /* Configuration of differential mode */
-      if (sConfig->SingleDiff == ADC_DIFFERENTIAL_ENDED)
+      if (pConfig->SingleDiff == ADC_DIFFERENTIAL_ENDED)
       {
         /* Set sampling time of the selected ADC channel */
         /* Note: ADC channel number masked with value "0x1F" to ensure shift value within 32 bits range */
         LL_ADC_SetChannelSamplingTime(hadc->Instance,
-                                      (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL((__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)sConfig->Channel) + 1UL) & 0x1FUL)),
-                                      sConfig->SamplingTime);
+                                      (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL(
+                                                   (__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)pConfig->Channel)
+                                                    + 1UL) & 0x1FUL)),
+                                      pConfig->SamplingTime);
       }
 
     }
@@ -2869,13 +2876,13 @@
     /* Note: these internal measurement paths can be disabled using           */
     /* HAL_ADC_DeInit().                                                      */
 
-    if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel))
+    if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfig->Channel))
     {
       tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
 
       /* If the requested internal measurement path has already been enabled, */
       /* bypass the configuration processing.                                 */
-      if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
+      if ((pConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
           && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL))
       {
         if (ADC_TEMPERATURE_SENSOR_INSTANCE(hadc))
@@ -2895,7 +2902,8 @@
           }
         }
       }
-      else if ((sConfig->Channel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL))
+      else if ((pConfig->Channel == ADC_CHANNEL_VBAT)
+               && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL))
       {
         if (ADC_BATTERY_VOLTAGE_INSTANCE(hadc))
         {
@@ -2903,7 +2911,7 @@
                                          LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel);
         }
       }
-      else if ((sConfig->Channel == ADC_CHANNEL_VREFINT)
+      else if ((pConfig->Channel == ADC_CHANNEL_VREFINT)
                && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL))
       {
         if (ADC_VREFINT_INSTANCE(hadc))
@@ -2950,28 +2958,28 @@
   * @note   On this STM32 series, analog watchdog thresholds cannot be modified
   *         while ADC conversion is on going.
   * @param hadc ADC handle
-  * @param AnalogWDGConfig Structure of ADC analog watchdog configuration
+  * @param pAnalogWDGConfig Structure of ADC analog watchdog configuration
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig)
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, const ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig)
 {
   HAL_StatusTypeDef tmp_hal_status = HAL_OK;
-  uint32_t tmpAWDHighThresholdShifted;
-  uint32_t tmpAWDLowThresholdShifted;
+  uint32_t tmp_awd_high_threshold_shifted;
+  uint32_t tmp_awd_low_threshold_shifted;
   uint32_t tmp_adc_is_conversion_on_going_regular;
   uint32_t tmp_adc_is_conversion_on_going_injected;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
-  assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(AnalogWDGConfig->WatchdogNumber));
-  assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode));
-  assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
+  assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(pAnalogWDGConfig->WatchdogNumber));
+  assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(pAnalogWDGConfig->WatchdogMode));
+  assert_param(IS_FUNCTIONAL_STATE(pAnalogWDGConfig->ITMode));
 
-  if ((AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG)     ||
-      (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC)   ||
-      (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC))
+  if ((pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG)     ||
+      (pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC)   ||
+      (pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC))
   {
-    assert_param(IS_ADC_CHANNEL(hadc, AnalogWDGConfig->Channel));
+    assert_param(IS_ADC_CHANNEL(hadc, pAnalogWDGConfig->Channel));
   }
 
   /* Verify thresholds range */
@@ -2980,14 +2988,14 @@
     /* Case of oversampling enabled: depending on ratio and shift configuration,
        analog watchdog thresholds can be higher than ADC resolution.
        Verify if thresholds are within maximum thresholds range. */
-    assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->HighThreshold));
-    assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->LowThreshold));
+    assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->HighThreshold));
+    assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->LowThreshold));
   }
   else
   {
     /* Verify if thresholds are within the selected ADC resolution */
-    assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold));
-    assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold));
+    assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->HighThreshold));
+    assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->LowThreshold));
   }
 
   /* Process locked */
@@ -3005,26 +3013,29 @@
      )
   {
     /* Analog watchdog configuration */
-    if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1)
+    if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1)
     {
       /* Configuration of analog watchdog:                                    */
       /*  - Set the analog watchdog enable mode: one or overall group of      */
       /*    channels, on groups regular and-or injected.                      */
-      switch (AnalogWDGConfig->WatchdogMode)
+      switch (pAnalogWDGConfig->WatchdogMode)
       {
         case ADC_ANALOGWATCHDOG_SINGLE_REG:
-          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel,
-                                          LL_ADC_GROUP_REGULAR));
+          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1,
+                                          __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel,
+                                                                          LL_ADC_GROUP_REGULAR));
           break;
 
         case ADC_ANALOGWATCHDOG_SINGLE_INJEC:
-          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel,
-                                          LL_ADC_GROUP_INJECTED));
+          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1,
+                                          __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel,
+                                                                          LL_ADC_GROUP_INJECTED));
           break;
 
         case ADC_ANALOGWATCHDOG_SINGLE_REGINJEC:
-          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel,
-                                          LL_ADC_GROUP_REGULAR_INJECTED));
+          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1,
+                                          __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel,
+                                                                          LL_ADC_GROUP_REGULAR_INJECTED));
           break;
 
         case ADC_ANALOGWATCHDOG_ALL_REG:
@@ -3047,12 +3058,12 @@
       /* Shift the offset in function of the selected ADC resolution:         */
       /* Thresholds have to be left-aligned on bit 11, the LSB (right bits)   */
       /* are set to 0                                                         */
-      tmpAWDHighThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold);
-      tmpAWDLowThresholdShifted  = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold);
+      tmp_awd_high_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->HighThreshold);
+      tmp_awd_low_threshold_shifted  = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->LowThreshold);
 
       /* Set ADC analog watchdog thresholds value of both thresholds high and low */
-      LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, AnalogWDGConfig->WatchdogNumber, tmpAWDHighThresholdShifted,
-                                      tmpAWDLowThresholdShifted);
+      LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, tmp_awd_high_threshold_shifted,
+                                      tmp_awd_low_threshold_shifted);
 
       /* Update state, clear previous result related to AWD1 */
       CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1);
@@ -3064,7 +3075,7 @@
       LL_ADC_ClearFlag_AWD1(hadc->Instance);
 
       /* Configure ADC analog watchdog interrupt */
-      if (AnalogWDGConfig->ITMode == ENABLE)
+      if (pAnalogWDGConfig->ITMode == ENABLE)
       {
         LL_ADC_EnableIT_AWD1(hadc->Instance);
       }
@@ -3076,44 +3087,47 @@
     /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */
     else
     {
-      switch (AnalogWDGConfig->WatchdogMode)
+      switch (pAnalogWDGConfig->WatchdogMode)
       {
         case ADC_ANALOGWATCHDOG_SINGLE_REG:
         case ADC_ANALOGWATCHDOG_SINGLE_INJEC:
         case ADC_ANALOGWATCHDOG_SINGLE_REGINJEC:
           /* Update AWD by bitfield to keep the possibility to monitor        */
           /* several channels by successive calls of this function.           */
-          if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
+          if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
           {
-            SET_BIT(hadc->Instance->AWD2CR, (1UL << (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel) & 0x1FUL)));
+            SET_BIT(hadc->Instance->AWD2CR,
+                    (1UL << (__LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel) & 0x1FUL)));
           }
           else
           {
-            SET_BIT(hadc->Instance->AWD3CR, (1UL << (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel) & 0x1FUL)));
+            SET_BIT(hadc->Instance->AWD3CR,
+                    (1UL << (__LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel) & 0x1FUL)));
           }
           break;
 
         case ADC_ANALOGWATCHDOG_ALL_REG:
         case ADC_ANALOGWATCHDOG_ALL_INJEC:
         case ADC_ANALOGWATCHDOG_ALL_REGINJEC:
-          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG_INJ);
+          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance,
+                                          pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG_INJ);
           break;
 
         default: /* ADC_ANALOGWATCHDOG_NONE */
-          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE);
+          LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE);
           break;
       }
 
       /* Shift the thresholds in function of the selected ADC resolution      */
       /* have to be left-aligned on bit 7, the LSB (right bits) are set to 0  */
-      tmpAWDHighThresholdShifted = ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold);
-      tmpAWDLowThresholdShifted  = ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold);
+      tmp_awd_high_threshold_shifted = ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->HighThreshold);
+      tmp_awd_low_threshold_shifted  = ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->LowThreshold);
 
       /* Set ADC analog watchdog thresholds value of both thresholds high and low */
-      LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, AnalogWDGConfig->WatchdogNumber, tmpAWDHighThresholdShifted,
-                                      tmpAWDLowThresholdShifted);
+      LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, tmp_awd_high_threshold_shifted,
+                                      tmp_awd_low_threshold_shifted);
 
-      if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
+      if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
       {
         /* Update state, clear previous result related to AWD2 */
         CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2);
@@ -3125,7 +3139,7 @@
         LL_ADC_ClearFlag_AWD2(hadc->Instance);
 
         /* Configure ADC analog watchdog interrupt */
-        if (AnalogWDGConfig->ITMode == ENABLE)
+        if (pAnalogWDGConfig->ITMode == ENABLE)
         {
           LL_ADC_EnableIT_AWD2(hadc->Instance);
         }
@@ -3134,7 +3148,7 @@
           LL_ADC_DisableIT_AWD2(hadc->Instance);
         }
       }
-      /* (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */
+      /* (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */
       else
       {
         /* Update state, clear previous result related to AWD3 */
@@ -3147,7 +3161,7 @@
         LL_ADC_ClearFlag_AWD3(hadc->Instance);
 
         /* Configure ADC analog watchdog interrupt */
-        if (AnalogWDGConfig->ITMode == ENABLE)
+        if (pAnalogWDGConfig->ITMode == ENABLE)
         {
           LL_ADC_EnableIT_AWD3(hadc->Instance);
         }
@@ -3207,7 +3221,7 @@
   * @param hadc ADC handle
   * @retval ADC handle state (bitfield on 32 bits)
   */
-uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc)
+uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc)
 {
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -3221,7 +3235,7 @@
   * @param hadc ADC handle
   * @retval ADC error code (bitfield on 32 bits)
   */
-uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
+uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc)
 {
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -3410,7 +3424,8 @@
     /* Enable the ADC peripheral */
     LL_ADC_Enable(hadc->Instance);
 
-    if((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL)
+    if ((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance))
+         & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL)
     {
       /* Delay for temperature sensor buffer stabilization time */
       /* Note: Value LL_ADC_DELAY_TEMPSENSOR_STAB_US used instead of      */
@@ -3423,7 +3438,7 @@
       /*       CPU processing cycles, scaling in us split to not          */
       /*       exceed 32 bits register capacity and handle low frequency. */
       wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
-      while(wait_loop_index != 0UL)
+      while (wait_loop_index != 0UL)
       {
         wait_loop_index--;
       }
diff --git a/Src/stm32l4xx_hal_adc_ex.c b/Src/stm32l4xx_hal_adc_ex.c
index a0714a7..0fd78a7 100644
--- a/Src/stm32l4xx_hal_adc_ex.c
+++ b/Src/stm32l4xx_hal_adc_ex.c
@@ -50,9 +50,10 @@
   * @{
   */
 
-#define ADC_JSQR_FIELDS  ((ADC_JSQR_JL | ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN |\
-                           ADC_JSQR_JSQ1  | ADC_JSQR_JSQ2 |\
-                           ADC_JSQR_JSQ3 | ADC_JSQR_JSQ4 ))  /*!< ADC_JSQR fields of parameters that can be updated anytime once the ADC is enabled */
+#define ADC_JSQR_FIELDS      ((ADC_JSQR_JL | ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN |\
+                               ADC_JSQR_JSQ1  | ADC_JSQR_JSQ2 |\
+                               ADC_JSQR_JSQ3 | ADC_JSQR_JSQ4 ))           /*!< ADC_JSQR fields of parameters that can
+                             be updated anytime once the ADC is enabled */
 
 /* Fixed timeout value for ADC calibration.                                   */
 /* Values defined to be higher than worst cases: maximum ratio between ADC    */
@@ -189,7 +190,7 @@
   *           @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended
   * @retval Calibration value.
   */
-uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff)
+uint32_t HAL_ADCEx_Calibration_GetValue(const ADC_HandleTypeDef *hadc, uint32_t SingleDiff)
 {
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -272,7 +273,7 @@
   uint32_t tmp_config_injected_queue;
 #if defined(ADC_MULTIMODE_SUPPORT)
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -338,7 +339,7 @@
       {
         CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE);
       }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
       /* Clear ADC group injected group conversion flag */
       /* (To ensure of no unknown state from potential previous ADC operations) */
@@ -385,7 +386,7 @@
         /* Start ADC group injected conversion */
         LL_ADC_INJ_StartConversion(hadc->Instance);
       }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
     }
     else
@@ -473,14 +474,14 @@
 HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout)
 {
   uint32_t tickstart;
-  uint32_t tmp_Flag_End;
+  uint32_t tmp_flag_end;
   uint32_t tmp_adc_inj_is_trigger_source_sw_start;
   uint32_t tmp_adc_reg_is_trigger_source_sw_start;
   uint32_t tmp_cfgr;
 #if defined(ADC_MULTIMODE_SUPPORT)
   const ADC_TypeDef *tmpADC_Master;
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -488,18 +489,18 @@
   /* If end of sequence selected */
   if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV)
   {
-    tmp_Flag_End = ADC_FLAG_JEOS;
+    tmp_flag_end = ADC_FLAG_JEOS;
   }
   else /* end of conversion selected */
   {
-    tmp_Flag_End = ADC_FLAG_JEOC;
+    tmp_flag_end = ADC_FLAG_JEOC;
   }
 
   /* Get timeout */
   tickstart = HAL_GetTick();
 
   /* Wait until End of Conversion or Sequence flag is raised */
-  while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
+  while ((hadc->Instance->ISR & tmp_flag_end) == 0UL)
   {
     /* Check if timeout is disabled (set to infinite wait) */
     if (Timeout != HAL_MAX_DELAY)
@@ -507,7 +508,7 @@
       if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
       {
         /* New check to avoid false timeout detection in case of preemption */
-        if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
+        if ((hadc->Instance->ISR & tmp_flag_end) == 0UL)
         {
           /* Update ADC state machine to timeout */
           SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
@@ -543,7 +544,7 @@
   }
 #else
   tmp_cfgr = READ_REG(hadc->Instance->CFGR);
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Update ADC state machine */
   SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
@@ -579,7 +580,7 @@
   }
 
   /* Clear polled flag */
-  if (tmp_Flag_End == ADC_FLAG_JEOS)
+  if (tmp_flag_end == ADC_FLAG_JEOS)
   {
     /* Clear end of sequence JEOS flag of injected group if low power feature */
     /* "LowPowerAutoWait " is disabled, to not interfere with this feature.   */
@@ -617,7 +618,7 @@
   uint32_t tmp_config_injected_queue;
 #if defined(ADC_MULTIMODE_SUPPORT)
   uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -683,7 +684,7 @@
       {
         CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE);
       }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
       /* Clear ADC group injected group conversion flag */
       /* (To ensure of no unknown state from potential previous ADC operations) */
@@ -751,7 +752,7 @@
         /* Start ADC group injected conversion */
         LL_ADC_INJ_StartConversion(hadc->Instance);
       }
-#endif
+#endif /* ADC_MULTIMODE_SUPPORT */
 
     }
     else
@@ -854,7 +855,7 @@
 HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length)
 {
   HAL_StatusTypeDef tmp_hal_status;
-  ADC_HandleTypeDef tmphadcSlave;
+  ADC_HandleTypeDef tmp_hadc_slave;
   ADC_Common_TypeDef *tmpADC_Common;
 
   /* Check the parameters */
@@ -873,13 +874,13 @@
     __HAL_LOCK(hadc);
 
     /* Temporary handle minimum initialization */
-    __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
-    ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+    __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave);
+    ADC_CLEAR_ERRORCODE(&tmp_hadc_slave);
 
     /* Set a temporary handle of the ADC slave associated to the ADC master   */
-    ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
+    ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave);
 
-    if (tmphadcSlave.Instance == NULL)
+    if (tmp_hadc_slave.Instance == NULL)
     {
       /* Set ADC state */
       SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
@@ -895,7 +896,7 @@
     tmp_hal_status = ADC_Enable(hadc);
     if (tmp_hal_status == HAL_OK)
     {
-      tmp_hal_status = ADC_Enable(&tmphadcSlave);
+      tmp_hal_status = ADC_Enable(&tmp_hadc_slave);
     }
 
     /* Start multimode conversion of ADCs pair */
@@ -974,9 +975,9 @@
 {
   HAL_StatusTypeDef tmp_hal_status;
   uint32_t tickstart;
-  ADC_HandleTypeDef tmphadcSlave;
-  uint32_t tmphadcSlave_conversion_on_going;
-  HAL_StatusTypeDef tmphadcSlave_disable_status;
+  ADC_HandleTypeDef tmp_hadc_slave;
+  uint32_t tmp_hadc_slave_conversion_on_going;
+  HAL_StatusTypeDef tmp_hadc_slave_disable_status;
 
   /* Check the parameters */
   assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance));
@@ -984,7 +985,6 @@
   /* Process locked */
   __HAL_LOCK(hadc);
 
-
   /* 1. Stop potential multimode conversion on going, on regular and injected groups */
   tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP);
 
@@ -992,13 +992,13 @@
   if (tmp_hal_status == HAL_OK)
   {
     /* Temporary handle minimum initialization */
-    __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
-    ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+    __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave);
+    ADC_CLEAR_ERRORCODE(&tmp_hadc_slave);
 
     /* Set a temporary handle of the ADC slave associated to the ADC master   */
-    ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
+    ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave);
 
-    if (tmphadcSlave.Instance == NULL)
+    if (tmp_hadc_slave.Instance == NULL)
     {
       /* Update ADC state machine to error */
       SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
@@ -1015,17 +1015,17 @@
     /* 1. Wait for ADC conversion completion for ADC master and ADC slave */
     tickstart = HAL_GetTick();
 
-    tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+    tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
     while ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL)
-           || (tmphadcSlave_conversion_on_going == 1UL)
+           || (tmp_hadc_slave_conversion_on_going == 1UL)
           )
     {
       if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
       {
         /* New check to avoid false timeout detection in case of preemption */
-        tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+        tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
         if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL)
-            || (tmphadcSlave_conversion_on_going == 1UL)
+            || (tmp_hadc_slave_conversion_on_going == 1UL)
            )
         {
           /* Update ADC state machine to error */
@@ -1038,7 +1038,7 @@
         }
       }
 
-      tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+      tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
     }
 
     /* Disable the DMA channel (in case of DMA in circular mode or stop       */
@@ -1062,9 +1062,9 @@
     /* memory a potential failing status.                                     */
     if (tmp_hal_status == HAL_OK)
     {
-      tmphadcSlave_disable_status = ADC_Disable(&tmphadcSlave);
+      tmp_hadc_slave_disable_status = ADC_Disable(&tmp_hadc_slave);
       if ((ADC_Disable(hadc) == HAL_OK)           &&
-          (tmphadcSlave_disable_status == HAL_OK))
+          (tmp_hadc_slave_disable_status == HAL_OK))
       {
         tmp_hal_status = HAL_OK;
       }
@@ -1073,7 +1073,7 @@
     {
       /* In case of error, attempt to disable ADC master and slave without status assert */
       (void) ADC_Disable(hadc);
-      (void) ADC_Disable(&tmphadcSlave);
+      (void) ADC_Disable(&tmp_hadc_slave);
     }
 
     /* Set ADC state (ADC master) */
@@ -1094,7 +1094,7 @@
   * @param hadc ADC handle of ADC Master (handle of ADC Slave must not be used)
   * @retval The converted data values.
   */
-uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc)
+uint32_t HAL_ADCEx_MultiModeGetValue(const ADC_HandleTypeDef *hadc)
 {
   const ADC_Common_TypeDef *tmpADC_Common;
 
@@ -1127,7 +1127,7 @@
   *            both flags JEOC and EOS are raised.
   *         Flag JEOS must not be cleared by this function because
   *         it would not be compliant with low power features
-  *         (feature low power auto-wait, not available on all STM32 families).
+  *         (feature low power auto-wait, not available on all STM32 series).
   *         To clear this flag, either use function:
   *         in programming model IT: @ref HAL_ADC_IRQHandler(), in programming
   *         model polling: @ref HAL_ADCEx_InjectedPollForConversion()
@@ -1141,7 +1141,7 @@
   *            @arg @ref ADC_INJECTED_RANK_4 ADC group injected rank 4
   * @retval ADC group injected conversion data
   */
-uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank)
+uint32_t HAL_ADCEx_InjectedGetValue(const ADC_HandleTypeDef *hadc, uint32_t InjectedRank)
 {
   uint32_t tmp_jdr;
 
@@ -1451,7 +1451,8 @@
 
 #if defined(ADC_MULTIMODE_SUPPORT)
 /**
-  * @brief  Stop DMA-based multimode ADC conversion, disable ADC DMA transfer, disable ADC peripheral if no injected conversion is on-going.
+  * @brief  Stop DMA-based multimode ADC conversion, disable ADC DMA transfer, disable ADC peripheral if no injected
+  *         conversion is on-going.
   * @note   Multimode is kept enabled after this function. Multimode DMA bits
   *         (MDMA and DMACFG bits of common CCR register) are maintained. To disable
   *         multimode (set with HAL_ADCEx_MultiModeConfigChannel()), ADC must be
@@ -1467,8 +1468,8 @@
 {
   HAL_StatusTypeDef tmp_hal_status;
   uint32_t tickstart;
-  ADC_HandleTypeDef tmphadcSlave;
-  uint32_t tmphadcSlave_conversion_on_going;
+  ADC_HandleTypeDef tmp_hadc_slave;
+  uint32_t tmp_hadc_slave_conversion_on_going;
 
   /* Check the parameters */
   assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance));
@@ -1487,13 +1488,13 @@
     CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
 
     /* Temporary handle minimum initialization */
-    __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
-    ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+    __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave);
+    ADC_CLEAR_ERRORCODE(&tmp_hadc_slave);
 
     /* Set a temporary handle of the ADC slave associated to the ADC master   */
-    ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
+    ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave);
 
-    if (tmphadcSlave.Instance == NULL)
+    if (tmp_hadc_slave.Instance == NULL)
     {
       /* Update ADC state machine to error */
       SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
@@ -1510,17 +1511,17 @@
     /* 1. Wait for ADC conversion completion for ADC master and ADC slave */
     tickstart = HAL_GetTick();
 
-    tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+    tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
     while ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL)
-           || (tmphadcSlave_conversion_on_going == 1UL)
+           || (tmp_hadc_slave_conversion_on_going == 1UL)
           )
     {
       if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
       {
         /* New check to avoid false timeout detection in case of preemption */
-        tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+        tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
         if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL)
-            || (tmphadcSlave_conversion_on_going == 1UL)
+            || (tmp_hadc_slave_conversion_on_going == 1UL)
            )
         {
           /* Update ADC state machine to error */
@@ -1533,7 +1534,7 @@
         }
       }
 
-      tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+      tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
     }
 
     /* Disable the DMA channel (in case of DMA in circular mode or stop       */
@@ -1563,9 +1564,9 @@
         tmp_hal_status =  ADC_Disable(hadc);
         if (tmp_hal_status == HAL_OK)
         {
-          if (LL_ADC_INJ_IsConversionOngoing((&tmphadcSlave)->Instance) == 0UL)
+          if (LL_ADC_INJ_IsConversionOngoing((&tmp_hadc_slave)->Instance) == 0UL)
           {
-            tmp_hal_status =  ADC_Disable(&tmphadcSlave);
+            tmp_hal_status =  ADC_Disable(&tmp_hadc_slave);
           }
         }
       }
@@ -1644,59 +1645,62 @@
   *    start once the 1st context is set, that is after the first three
   *    HAL_ADCEx_InjectedConfigChannel() calls. The 2nd context can be set on the fly.
   * @param hadc ADC handle
-  * @param sConfigInjected Structure of ADC injected group and ADC channel for
+  * @param pConfigInjected Structure of ADC injected group and ADC channel for
   *         injected group.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_InjectionConfTypeDef *sConfigInjected)
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc,
+                                                  const ADC_InjectionConfTypeDef *pConfigInjected)
 {
   HAL_StatusTypeDef tmp_hal_status = HAL_OK;
-  uint32_t tmpOffsetShifted;
+  uint32_t tmp_offset_shifted;
   uint32_t tmp_config_internal_channel;
   uint32_t tmp_adc_is_conversion_on_going_regular;
   uint32_t tmp_adc_is_conversion_on_going_injected;
   __IO uint32_t wait_loop_index = 0;
 
-  uint32_t tmp_JSQR_ContextQueueBeingBuilt = 0U;
+  uint32_t tmp_jsqr_context_queue_being_built = 0U;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
-  assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
-  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(sConfigInjected->InjectedSingleDiff));
-  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
-  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->QueueInjectedContext));
-  assert_param(IS_ADC_EXTTRIGINJEC_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
-  assert_param(IS_ADC_EXTTRIGINJEC(hadc, sConfigInjected->ExternalTrigInjecConv));
-  assert_param(IS_ADC_OFFSET_NUMBER(sConfigInjected->InjectedOffsetNumber));
-  assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), sConfigInjected->InjectedOffset));
-  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjecOversamplingMode));
+  assert_param(IS_ADC_SAMPLE_TIME(pConfigInjected->InjectedSamplingTime));
+  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(pConfigInjected->InjectedSingleDiff));
+  assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->AutoInjectedConv));
+  assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->QueueInjectedContext));
+  assert_param(IS_ADC_EXTTRIGINJEC_EDGE(pConfigInjected->ExternalTrigInjecConvEdge));
+  assert_param(IS_ADC_EXTTRIGINJEC(hadc, pConfigInjected->ExternalTrigInjecConv));
+  assert_param(IS_ADC_OFFSET_NUMBER(pConfigInjected->InjectedOffsetNumber));
+  assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pConfigInjected->InjectedOffset));
+  assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->InjecOversamplingMode));
 
   if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE)
   {
-    assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
-    assert_param(IS_ADC_INJECTED_NB_CONV(sConfigInjected->InjectedNbrOfConversion));
-    assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
+    assert_param(IS_ADC_INJECTED_RANK(pConfigInjected->InjectedRank));
+    assert_param(IS_ADC_INJECTED_NB_CONV(pConfigInjected->InjectedNbrOfConversion));
+    assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->InjectedDiscontinuousConvMode));
   }
 
 
   /* if JOVSE is set, the value of the OFFSETy_EN bit in ADCx_OFRy register is
      ignored (considered as reset) */
-  assert_param(!((sConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE) && (sConfigInjected->InjecOversamplingMode == ENABLE)));
+  assert_param(!((pConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE)
+                 && (pConfigInjected->InjecOversamplingMode == ENABLE)));
 
   /* JDISCEN and JAUTO bits can't be set at the same time  */
-  assert_param(!((sConfigInjected->InjectedDiscontinuousConvMode == ENABLE) && (sConfigInjected->AutoInjectedConv == ENABLE)));
+  assert_param(!((pConfigInjected->InjectedDiscontinuousConvMode == ENABLE)
+                 && (pConfigInjected->AutoInjectedConv == ENABLE)));
 
   /*  DISCEN and JAUTO bits can't be set at the same time */
-  assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (sConfigInjected->AutoInjectedConv == ENABLE)));
+  assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (pConfigInjected->AutoInjectedConv == ENABLE)));
 
   /* Verification of channel number */
-  if (sConfigInjected->InjectedSingleDiff != ADC_DIFFERENTIAL_ENDED)
+  if (pConfigInjected->InjectedSingleDiff != ADC_DIFFERENTIAL_ENDED)
   {
-    assert_param(IS_ADC_CHANNEL(hadc, sConfigInjected->InjectedChannel));
+    assert_param(IS_ADC_CHANNEL(hadc, pConfigInjected->InjectedChannel));
   }
   else
   {
-    assert_param(IS_ADC_DIFF_CHANNEL(hadc, sConfigInjected->InjectedChannel));
+    assert_param(IS_ADC_DIFF_CHANNEL(hadc, pConfigInjected->InjectedChannel));
   }
 
   /* Process locked */
@@ -1724,7 +1728,7 @@
   /*   by software for alignment over all STM32 devices.                      */
 
   if ((hadc->Init.ScanConvMode == ADC_SCAN_DISABLE)  ||
-      (sConfigInjected->InjectedNbrOfConversion == 1U))
+      (pConfigInjected->InjectedNbrOfConversion == 1U))
   {
     /* Configuration of context register JSQR:                                */
     /*  - number of ranks in injected group sequencer: fixed to 1st rank      */
@@ -1733,28 +1737,28 @@
     /*  - external trigger polarity                                           */
     /*  - channel set to rank 1 (scan mode disabled, only rank 1 can be used) */
 
-    if (sConfigInjected->InjectedRank == ADC_INJECTED_RANK_1)
+    if (pConfigInjected->InjectedRank == ADC_INJECTED_RANK_1)
     {
       /* Enable external trigger if trigger selection is different of         */
       /* software start.                                                      */
       /* Note: This configuration keeps the hardware feature of parameter     */
       /*       ExternalTrigInjecConvEdge "trigger edge none" equivalent to    */
       /*       software start.                                                */
-      if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
+      if (pConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
       {
-        tmp_JSQR_ContextQueueBeingBuilt = (ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1)
-                                           | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL)
-                                           | sConfigInjected->ExternalTrigInjecConvEdge
-                                          );
+        tmp_jsqr_context_queue_being_built = (ADC_JSQR_RK(pConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1)
+                                              | (pConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL)
+                                              | pConfigInjected->ExternalTrigInjecConvEdge
+                                             );
       }
       else
       {
-        tmp_JSQR_ContextQueueBeingBuilt = (ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1));
+        tmp_jsqr_context_queue_being_built = (ADC_JSQR_RK(pConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1));
       }
 
-      MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, tmp_JSQR_ContextQueueBeingBuilt);
+      MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, tmp_jsqr_context_queue_being_built);
       /* For debug and informative reasons, hadc handle saves JSQR setting */
-      hadc->InjectionConfig.ContextQueue = tmp_JSQR_ContextQueueBeingBuilt;
+      hadc->InjectionConfig.ContextQueue = tmp_jsqr_context_queue_being_built;
 
     }
   }
@@ -1774,7 +1778,7 @@
     {
       /* Initialize number of channels that will be configured on the context */
       /*  being built                                                         */
-      hadc->InjectionConfig.ChannelCount = sConfigInjected->InjectedNbrOfConversion;
+      hadc->InjectionConfig.ChannelCount = pConfigInjected->InjectedNbrOfConversion;
       /* Handle hadc saves the context under build up over each HAL_ADCEx_InjectedConfigChannel()
          call, this context will be written in JSQR register at the last call.
          At this point, the context is merely reset  */
@@ -1790,16 +1794,16 @@
       /* Note: This configuration keeps the hardware feature of parameter     */
       /*       ExternalTrigInjecConvEdge "trigger edge none" equivalent to    */
       /*       software start.                                                */
-      if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
+      if (pConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
       {
-        tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U)
-                                           | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL)
-                                           | sConfigInjected->ExternalTrigInjecConvEdge
-                                          );
+        tmp_jsqr_context_queue_being_built = ((pConfigInjected->InjectedNbrOfConversion - 1U)
+                                              | (pConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL)
+                                              | pConfigInjected->ExternalTrigInjecConvEdge
+                                             );
       }
       else
       {
-        tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U));
+        tmp_jsqr_context_queue_being_built = ((pConfigInjected->InjectedNbrOfConversion - 1U));
       }
 
     }
@@ -1807,18 +1811,18 @@
     /* 2. Continue setting of context under definition with parameter       */
     /*    related to each channel: channel rank sequence                    */
     /* Clear the old JSQx bits for the selected rank */
-    tmp_JSQR_ContextQueueBeingBuilt &= ~ADC_JSQR_RK(ADC_SQR3_SQ10, sConfigInjected->InjectedRank);
+    tmp_jsqr_context_queue_being_built &= ~ADC_JSQR_RK(ADC_SQR3_SQ10, pConfigInjected->InjectedRank);
 
     /* Set the JSQx bits for the selected rank */
-    tmp_JSQR_ContextQueueBeingBuilt |= ADC_JSQR_RK(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank);
+    tmp_jsqr_context_queue_being_built |= ADC_JSQR_RK(pConfigInjected->InjectedChannel, pConfigInjected->InjectedRank);
 
     /* Decrease channel count  */
     hadc->InjectionConfig.ChannelCount--;
 
-    /* 3. tmp_JSQR_ContextQueueBeingBuilt is fully built for this HAL_ADCEx_InjectedConfigChannel()
+    /* 3. tmp_jsqr_context_queue_being_built is fully built for this HAL_ADCEx_InjectedConfigChannel()
           call, aggregate the setting to those already built during the previous
           HAL_ADCEx_InjectedConfigChannel() calls (for the same context of course)  */
-    hadc->InjectionConfig.ContextQueue |= tmp_JSQR_ContextQueueBeingBuilt;
+    hadc->InjectionConfig.ContextQueue |= tmp_jsqr_context_queue_being_built;
 
     /* 4. End of context setting: if this is the last channel set, then write context
         into register JSQR and make it enter into queue                   */
@@ -1838,12 +1842,12 @@
   if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
   {
     /* If auto-injected mode is disabled: no constraint                       */
-    if (sConfigInjected->AutoInjectedConv == DISABLE)
+    if (pConfigInjected->AutoInjectedConv == DISABLE)
     {
       MODIFY_REG(hadc->Instance->CFGR,
                  ADC_CFGR_JQM | ADC_CFGR_JDISCEN,
-                 ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext)           |
-                 ADC_CFGR_INJECT_DISCCONTINUOUS((uint32_t)sConfigInjected->InjectedDiscontinuousConvMode));
+                 ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)pConfigInjected->QueueInjectedContext)           |
+                 ADC_CFGR_INJECT_DISCCONTINUOUS((uint32_t)pConfigInjected->InjectedDiscontinuousConvMode));
     }
     /* If auto-injected mode is enabled: Injected discontinuous setting is    */
     /* discarded.                                                             */
@@ -1851,7 +1855,7 @@
     {
       MODIFY_REG(hadc->Instance->CFGR,
                  ADC_CFGR_JQM | ADC_CFGR_JDISCEN,
-                 ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext));
+                 ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)pConfigInjected->QueueInjectedContext));
     }
 
   }
@@ -1872,10 +1876,10 @@
   {
     /* If injected group external triggers are disabled (set to injected      */
     /* software start): no constraint                                         */
-    if ((sConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START)
-        || (sConfigInjected->ExternalTrigInjecConvEdge == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE))
+    if ((pConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START)
+        || (pConfigInjected->ExternalTrigInjecConvEdge == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE))
     {
-      if (sConfigInjected->AutoInjectedConv == ENABLE)
+      if (pConfigInjected->AutoInjectedConv == ENABLE)
       {
         SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO);
       }
@@ -1888,7 +1892,7 @@
     /* due to injected group external triggers enabled, error is reported.    */
     else
     {
-      if (sConfigInjected->AutoInjectedConv == ENABLE)
+      if (pConfigInjected->AutoInjectedConv == ENABLE)
       {
         /* Update ADC state machine to error */
         SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
@@ -1901,13 +1905,14 @@
       }
     }
 
-    if (sConfigInjected->InjecOversamplingMode == ENABLE)
+    if (pConfigInjected->InjecOversamplingMode == ENABLE)
     {
-      assert_param(IS_ADC_OVERSAMPLING_RATIO(sConfigInjected->InjecOversampling.Ratio));
-      assert_param(IS_ADC_RIGHT_BIT_SHIFT(sConfigInjected->InjecOversampling.RightBitShift));
+      assert_param(IS_ADC_OVERSAMPLING_RATIO(pConfigInjected->InjecOversampling.Ratio));
+      assert_param(IS_ADC_RIGHT_BIT_SHIFT(pConfigInjected->InjecOversampling.RightBitShift));
 
       /*  JOVSE must be reset in case of triggered regular mode  */
-      assert_param(!(READ_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS) == (ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS)));
+      assert_param(!(READ_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS)
+                     == (ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS)));
 
       /* Configuration of Injected Oversampler:                                 */
       /*  - Oversampling Ratio                                                  */
@@ -1919,8 +1924,8 @@
                  ADC_CFGR2_OVSR  |
                  ADC_CFGR2_OVSS,
                  ADC_CFGR2_JOVSE                                  |
-                 sConfigInjected->InjecOversampling.Ratio         |
-                 sConfigInjected->InjecOversampling.RightBitShift
+                 pConfigInjected->InjecOversampling.Ratio         |
+                 pConfigInjected->InjecOversampling.RightBitShift
                 );
     }
     else
@@ -1931,10 +1936,10 @@
 
 #if defined(ADC_SMPR1_SMPPLUS)
     /* Manage specific case of sampling time 3.5 cycles replacing 2.5 cyles */
-    if (sConfigInjected->InjectedSamplingTime == ADC_SAMPLETIME_3CYCLES_5)
+    if (pConfigInjected->InjectedSamplingTime == ADC_SAMPLETIME_3CYCLES_5)
     {
       /* Set sampling time of the selected ADC channel */
-      LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfigInjected->InjectedChannel, LL_ADC_SAMPLINGTIME_2CYCLES_5);
+      LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfigInjected->InjectedChannel, LL_ADC_SAMPLINGTIME_2CYCLES_5);
 
       /* Set ADC sampling time common configuration */
       LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5);
@@ -1942,27 +1947,29 @@
     else
     {
       /* Set sampling time of the selected ADC channel */
-      LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfigInjected->InjectedChannel, sConfigInjected->InjectedSamplingTime);
+      LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfigInjected->InjectedChannel,
+                                    pConfigInjected->InjectedSamplingTime);
 
       /* Set ADC sampling time common configuration */
       LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_DEFAULT);
     }
 #else
     /* Set sampling time of the selected ADC channel */
-    LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfigInjected->InjectedChannel, sConfigInjected->InjectedSamplingTime);
-#endif
+    LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfigInjected->InjectedChannel,
+                                  pConfigInjected->InjectedSamplingTime);
+#endif /* ADC_SMPR1_SMPPLUS */
 
     /* Configure the offset: offset enable/disable, channel, offset value */
 
     /* Shift the offset with respect to the selected ADC resolution. */
     /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */
-    tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, sConfigInjected->InjectedOffset);
+    tmp_offset_shifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, pConfigInjected->InjectedOffset);
 
-    if (sConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE)
+    if (pConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE)
     {
       /* Set ADC selected offset number */
-      LL_ADC_SetOffset(hadc->Instance, sConfigInjected->InjectedOffsetNumber, sConfigInjected->InjectedChannel,
-                       tmpOffsetShifted);
+      LL_ADC_SetOffset(hadc->Instance, pConfigInjected->InjectedOffsetNumber, pConfigInjected->InjectedChannel,
+                       tmp_offset_shifted);
 
     }
     else
@@ -1970,22 +1977,22 @@
       /* Scan each offset register to check if the selected channel is targeted. */
       /* If this is the case, the corresponding offset number is disabled.       */
       if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_1))
-          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
+          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel))
       {
         LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE);
       }
       if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_2))
-          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
+          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel))
       {
         LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE);
       }
       if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_3))
-          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
+          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel))
       {
         LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE);
       }
       if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_4))
-          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
+          == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel))
       {
         LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE);
       }
@@ -1999,16 +2006,19 @@
   if (LL_ADC_IsEnabled(hadc->Instance) == 0UL)
   {
     /* Set mode single-ended or differential input of the selected ADC channel */
-    LL_ADC_SetChannelSingleDiff(hadc->Instance, sConfigInjected->InjectedChannel, sConfigInjected->InjectedSingleDiff);
+    LL_ADC_SetChannelSingleDiff(hadc->Instance, pConfigInjected->InjectedChannel, pConfigInjected->InjectedSingleDiff);
 
     /* Configuration of differential mode */
     /* Note: ADC channel number masked with value "0x1F" to ensure shift value within 32 bits range */
-    if (sConfigInjected->InjectedSingleDiff == ADC_DIFFERENTIAL_ENDED)
+    if (pConfigInjected->InjectedSingleDiff == ADC_DIFFERENTIAL_ENDED)
     {
       /* Set sampling time of the selected ADC channel */
       LL_ADC_SetChannelSamplingTime(hadc->Instance,
-                                    (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL((__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)sConfigInjected->InjectedChannel)
-                                                                               + 1UL) & 0x1FUL)), sConfigInjected->InjectedSamplingTime);
+                                    (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL(
+                                                 (__LL_ADC_CHANNEL_TO_DECIMAL_NB(
+                                                    (uint32_t)pConfigInjected->InjectedChannel)
+                                                  + 1UL) & 0x1FUL)),
+                                    pConfigInjected->InjectedSamplingTime);
     }
 
   }
@@ -2019,13 +2029,13 @@
   /* Note: these internal measurement paths can be disabled using           */
   /* HAL_ADC_DeInit().                                                      */
 
-  if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfigInjected->InjectedChannel))
+  if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfigInjected->InjectedChannel))
   {
     tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
 
     /* If the requested internal measurement path has already been enabled,   */
     /* bypass the configuration processing.                                   */
-    if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR)
+    if ((pConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR)
         && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL))
     {
       if (ADC_TEMPERATURE_SENSOR_INSTANCE(hadc))
@@ -2038,14 +2048,15 @@
         /* Note: Variable divided by 2 to compensate partially              */
         /*       CPU processing cycles, scaling in us split to not          */
         /*       exceed 32 bits register capacity and handle low frequency. */
-        wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (((SystemCoreClock / (100000UL * 2UL)) + 1UL) + 1UL));
+        wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL)
+                           * (((SystemCoreClock / (100000UL * 2UL)) + 1UL) + 1UL));
         while (wait_loop_index != 0UL)
         {
           wait_loop_index--;
         }
       }
     }
-    else if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT)
+    else if ((pConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT)
              && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL))
     {
       if (ADC_BATTERY_VOLTAGE_INSTANCE(hadc))
@@ -2054,7 +2065,7 @@
                                        LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel);
       }
     }
-    else if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)
+    else if ((pConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)
              && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL))
     {
       if (ADC_VREFINT_INSTANCE(hadc))
@@ -2090,35 +2101,35 @@
   * @note   To move back configuration from multimode to single mode, ADC must
   *         be reset (using function HAL_ADC_Init() ).
   * @param hadc Master ADC handle
-  * @param multimode Structure of ADC multimode configuration
+  * @param pMultimode Structure of ADC multimode configuration
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode)
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, const ADC_MultiModeTypeDef *pMultimode)
 {
   HAL_StatusTypeDef tmp_hal_status = HAL_OK;
   ADC_Common_TypeDef *tmpADC_Common;
-  ADC_HandleTypeDef tmphadcSlave;
-  uint32_t tmphadcSlave_conversion_on_going;
+  ADC_HandleTypeDef tmp_hadc_slave;
+  uint32_t tmp_hadc_slave_conversion_on_going;
 
   /* Check the parameters */
   assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance));
-  assert_param(IS_ADC_MULTIMODE(multimode->Mode));
-  if (multimode->Mode != ADC_MODE_INDEPENDENT)
+  assert_param(IS_ADC_MULTIMODE(pMultimode->Mode));
+  if (pMultimode->Mode != ADC_MODE_INDEPENDENT)
   {
-    assert_param(IS_ADC_DMA_ACCESS_MULTIMODE(multimode->DMAAccessMode));
-    assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
+    assert_param(IS_ADC_DMA_ACCESS_MULTIMODE(pMultimode->DMAAccessMode));
+    assert_param(IS_ADC_SAMPLING_DELAY(pMultimode->TwoSamplingDelay));
   }
 
   /* Process locked */
   __HAL_LOCK(hadc);
 
   /* Temporary handle minimum initialization */
-  __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
-  ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+  __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave);
+  ADC_CLEAR_ERRORCODE(&tmp_hadc_slave);
 
-  ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
+  ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave);
 
-  if (tmphadcSlave.Instance == NULL)
+  if (tmp_hadc_slave.Instance == NULL)
   {
     /* Update ADC state machine to error */
     SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
@@ -2134,9 +2145,9 @@
   /* conversion on going on regular group:                                    */
   /*  - Multimode DMA configuration                                           */
   /*  - Multimode DMA mode                                                    */
-  tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+  tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance);
   if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
-      && (tmphadcSlave_conversion_on_going == 0UL))
+      && (tmp_hadc_slave_conversion_on_going == 0UL))
   {
     /* Pointer to the common control register */
     tmpADC_Common = __LL_ADC_COMMON_INSTANCE(hadc->Instance);
@@ -2144,10 +2155,10 @@
     /* If multimode is selected, configure all multimode parameters.          */
     /* Otherwise, reset multimode parameters (can be used in case of          */
     /* transition from multimode to independent mode).                        */
-    if (multimode->Mode != ADC_MODE_INDEPENDENT)
+    if (pMultimode->Mode != ADC_MODE_INDEPENDENT)
     {
       MODIFY_REG(tmpADC_Common->CCR, ADC_CCR_MDMA | ADC_CCR_DMACFG,
-                 multimode->DMAAccessMode |
+                 pMultimode->DMAAccessMode |
                  ADC_CCR_MULTI_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests));
 
       /* Parameters that can be updated only when ADC is disabled:                */
@@ -2165,8 +2176,8 @@
         MODIFY_REG(tmpADC_Common->CCR,
                    ADC_CCR_DUAL |
                    ADC_CCR_DELAY,
-                   multimode->Mode |
-                   multimode->TwoSamplingDelay
+                   pMultimode->Mode |
+                   pMultimode->TwoSamplingDelay
                   );
       }
     }
diff --git a/Src/stm32l4xx_hal_can.c b/Src/stm32l4xx_hal_can.c
index b37ea07..9c51e6f 100644
--- a/Src/stm32l4xx_hal_can.c
+++ b/Src/stm32l4xx_hal_can.c
@@ -1524,7 +1524,15 @@
                         hcan->Instance->sFIFOMailBox[RxFifo].RIR) >> CAN_RI0R_EXID_Pos;
     }
     pHeader->RTR = (CAN_RI0R_RTR & hcan->Instance->sFIFOMailBox[RxFifo].RIR);
-    pHeader->DLC = (CAN_RDT0R_DLC & hcan->Instance->sFIFOMailBox[RxFifo].RDTR) >> CAN_RDT0R_DLC_Pos;
+    if (((CAN_RDT0R_DLC & hcan->Instance->sFIFOMailBox[RxFifo].RDTR) >> CAN_RDT0R_DLC_Pos) >= 8U)
+    {
+      /* Truncate DLC to 8 if received field is over range */
+      pHeader->DLC = 8U;
+    }
+    else
+    {
+      pHeader->DLC = (CAN_RDT0R_DLC & hcan->Instance->sFIFOMailBox[RxFifo].RDTR) >> CAN_RDT0R_DLC_Pos;
+    }
     pHeader->FilterMatchIndex = (CAN_RDT0R_FMI & hcan->Instance->sFIFOMailBox[RxFifo].RDTR) >> CAN_RDT0R_FMI_Pos;
     pHeader->Timestamp = (CAN_RDT0R_TIME & hcan->Instance->sFIFOMailBox[RxFifo].RDTR) >> CAN_RDT0R_TIME_Pos;
 
diff --git a/Src/stm32l4xx_hal_comp.c b/Src/stm32l4xx_hal_comp.c
index c5d1096..9af2683 100644
--- a/Src/stm32l4xx_hal_comp.c
+++ b/Src/stm32l4xx_hal_comp.c
@@ -21,16 +21,14 @@
   *
   ******************************************************************************
   @verbatim
-================================================================================
+  ==============================================================================
           ##### COMP Peripheral features #####
-================================================================================
+  ==============================================================================
 
   [..]
       The STM32L4xx device family integrates two analog comparators instances:
       COMP1, COMP2 except for the STM32L412xx/STM32L422xx products featuring only
-      one instance: COMP1.
-      In the rest of the file, all comments related to a pair of comparators are not
-      applicable to STM32L412xx/STM32L422xx.
+      one instance: COMP1 (in this case, all comments related to pair of comparators are not applicable)
       (#) Comparators input minus (inverting input) and input plus (non inverting input)
           can be set to internal references or to GPIO pins
           (refer to GPIO list in reference manual).
@@ -50,7 +48,7 @@
           using macro __HAL_COMP_COMPx_EXTI_GET_FLAG().
 
             ##### How to use this driver #####
-================================================================================
+  ==============================================================================
   [..]
       This driver provides functions to configure and program the comparator instances
       of STM32L4xx devices.
@@ -156,7 +154,6 @@
 
   @endverbatim
   ******************************************************************************
-
   Table 1. COMP inputs and output for STM32L4xx devices
   +-----------------------------------------------------------------+
   |                |                |     COMP1     |   COMP2 (4)   |
@@ -215,7 +212,7 @@
 /* Literal set to maximum value (refer to device datasheet,                   */
 /* parameter "tSTART").                                                       */
 /* Unit: us                                                                   */
-#define COMP_DELAY_STARTUP_US          (80UL) /*!< Delay for COMP startup time */
+#define COMP_DELAY_STARTUP_US          (80UL)      /*!< Delay for COMP startup time */
 
 /* Delay for COMP voltage scaler stabilization time.                          */
 /* Literal set to maximum value (refer to device datasheet,                   */
@@ -268,11 +265,11 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the COMP handle allocation and lock status */
-  if(hcomp == NULL)
+  if (hcomp == NULL)
   {
     status = HAL_ERROR;
   }
-  else if(__HAL_COMP_IS_LOCKED(hcomp))
+  else if (__HAL_COMP_IS_LOCKED(hcomp))
   {
     status = HAL_ERROR;
   }
@@ -287,11 +284,13 @@
     assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis));
     assert_param(IS_COMP_BLANKINGSRC_INSTANCE(hcomp->Instance, hcomp->Init.BlankingSrce));
     assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode));
+
 #if defined(COMP2)
     assert_param(IS_COMP_WINDOWMODE(hcomp->Init.WindowMode));
-#endif
+#endif /* COMP2 */
 
-    if(hcomp->State == HAL_COMP_STATE_RESET)
+
+    if (hcomp->State == HAL_COMP_STATE_RESET)
     {
       /* Allocate lock resource and initialize it */
       hcomp->Lock = HAL_UNLOCKED;
@@ -331,7 +330,7 @@
     comp_voltage_scaler_initialized = READ_BIT(hcomp->Instance->CSR, COMP_CSR_SCALEN);
 
     /* Set COMP parameters */
-    tmp_csr = (  hcomp->Init.NonInvertingInput
+    tmp_csr = (hcomp->Init.NonInvertingInput
                | hcomp->Init.InvertingInput
                | hcomp->Init.BlankingSrce
                | hcomp->Init.Hysteresis
@@ -352,7 +351,7 @@
 #else
     MODIFY_REG(hcomp->Instance->CSR,
                COMP_CSR_PWRMODE  | COMP_CSR_INMSEL   | COMP_CSR_INPSEL  |
-                                   COMP_CSR_POLARITY | COMP_CSR_HYST    |
+               COMP_CSR_POLARITY | COMP_CSR_HYST    |
                COMP_CSR_BLANKING | COMP_CSR_BRGEN    | COMP_CSR_SCALEN  | COMP_CSR_INMESEL,
                tmp_csr
               );
@@ -366,12 +365,13 @@
               );
 #endif /* COMP_CSR_INMESEL */
 
+
 #if defined(COMP2)
     /* Set window mode */
     /* Note: Window mode bit is located into 1 out of the 2 pairs of COMP     */
     /*       instances. Therefore, this function can update another COMP      */
     /*       instance that the one currently selected.                        */
-    if(hcomp->Init.WindowMode == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)
+    if (hcomp->Init.WindowMode == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)
     {
       SET_BIT(COMP12_COMMON->CSR, COMP_CSR_WINMODE);
     }
@@ -381,17 +381,18 @@
     }
 #endif /* COMP2 */
 
+
     /* Delay for COMP scaler bridge voltage stabilization */
     /* Apply the delay if voltage scaler bridge is required and not already enabled */
     if ((READ_BIT(hcomp->Instance->CSR, COMP_CSR_SCALEN) != 0UL) &&
-        (comp_voltage_scaler_initialized == 0UL)               )
+        (comp_voltage_scaler_initialized == 0UL))
     {
       /* Wait loop initialization and execution */
       /* Note: Variable divided by 2 to compensate partially              */
       /*       CPU processing cycles, scaling in us split to not          */
       /*       exceed 32 bits register capacity and handle low frequency. */
       wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
-      while(wait_loop_index != 0UL)
+      while (wait_loop_index != 0UL)
       {
         wait_loop_index--;
       }
@@ -401,10 +402,10 @@
     exti_line = COMP_GET_EXTI_LINE(hcomp->Instance);
 
     /* Manage EXTI settings */
-    if((hcomp->Init.TriggerMode & (COMP_EXTI_IT | COMP_EXTI_EVENT)) != 0UL)
+    if ((hcomp->Init.TriggerMode & (COMP_EXTI_IT | COMP_EXTI_EVENT)) != 0UL)
     {
       /* Configure EXTI rising edge */
-      if((hcomp->Init.TriggerMode & COMP_EXTI_RISING) != 0UL)
+      if ((hcomp->Init.TriggerMode & COMP_EXTI_RISING) != 0UL)
       {
         LL_EXTI_EnableRisingTrig_0_31(exti_line);
       }
@@ -414,7 +415,7 @@
       }
 
       /* Configure EXTI falling edge */
-      if((hcomp->Init.TriggerMode & COMP_EXTI_FALLING) != 0UL)
+      if ((hcomp->Init.TriggerMode & COMP_EXTI_FALLING) != 0UL)
       {
         LL_EXTI_EnableFallingTrig_0_31(exti_line);
       }
@@ -427,7 +428,7 @@
       LL_EXTI_ClearFlag_0_31(exti_line);
 
       /* Configure EXTI event mode */
-      if((hcomp->Init.TriggerMode & COMP_EXTI_EVENT) != 0UL)
+      if ((hcomp->Init.TriggerMode & COMP_EXTI_EVENT) != 0UL)
       {
         LL_EXTI_EnableEvent_0_31(exti_line);
       }
@@ -437,7 +438,7 @@
       }
 
       /* Configure EXTI interrupt mode */
-      if((hcomp->Init.TriggerMode & COMP_EXTI_IT) != 0UL)
+      if ((hcomp->Init.TriggerMode & COMP_EXTI_IT) != 0UL)
       {
         LL_EXTI_EnableIT_0_31(exti_line);
       }
@@ -479,11 +480,11 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the COMP handle allocation and lock status */
-  if(hcomp == NULL)
+  if (hcomp == NULL)
   {
     status = HAL_ERROR;
   }
-  else if(__HAL_COMP_IS_LOCKED(hcomp))
+  else if (__HAL_COMP_IS_LOCKED(hcomp))
   {
     status = HAL_ERROR;
   }
@@ -562,7 +563,8 @@
   * @param  pCallback pointer to the Callback function
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, pCOMP_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID,
+                                            pCOMP_CallbackTypeDef pCallback)
 {
   HAL_StatusTypeDef status = HAL_OK;
 
@@ -738,11 +740,11 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the COMP handle allocation and lock status */
-  if(hcomp == NULL)
+  if (hcomp == NULL)
   {
     status = HAL_ERROR;
   }
-  else if(__HAL_COMP_IS_LOCKED(hcomp))
+  else if (__HAL_COMP_IS_LOCKED(hcomp))
   {
     status = HAL_ERROR;
   }
@@ -751,7 +753,7 @@
     /* Check the parameter */
     assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
 
-    if(hcomp->State == HAL_COMP_STATE_READY)
+    if (hcomp->State == HAL_COMP_STATE_READY)
     {
       /* Enable the selected comparator */
       SET_BIT(hcomp->Instance->CSR, COMP_CSR_EN);
@@ -765,7 +767,7 @@
       /*       CPU processing cycles, scaling in us split to not          */
       /*       exceed 32 bits register capacity and handle low frequency. */
       wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
-      while(wait_loop_index != 0UL)
+      while (wait_loop_index != 0UL)
       {
         wait_loop_index--;
       }
@@ -789,11 +791,11 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the COMP handle allocation and lock status */
-  if(hcomp == NULL)
+  if (hcomp == NULL)
   {
     status = HAL_ERROR;
   }
-  else if(__HAL_COMP_IS_LOCKED(hcomp))
+  else if (__HAL_COMP_IS_LOCKED(hcomp))
   {
     status = HAL_ERROR;
   }
@@ -804,7 +806,7 @@
 
     /* Check compliant states: HAL_COMP_STATE_READY or HAL_COMP_STATE_BUSY    */
     /* (all states except HAL_COMP_STATE_RESET and except locked status.      */
-    if(hcomp->State != HAL_COMP_STATE_RESET)
+    if (hcomp->State != HAL_COMP_STATE_RESET)
     {
       /* Disable the selected comparator */
       CLEAR_BIT(hcomp->Instance->CSR, COMP_CSR_EN);
@@ -832,11 +834,11 @@
   uint32_t exti_line = COMP_GET_EXTI_LINE(hcomp->Instance);
 
   /* Check COMP EXTI flag */
-  if(LL_EXTI_IsActiveFlag_0_31(exti_line) != 0UL)
+  if (LL_EXTI_IsActiveFlag_0_31(exti_line) != 0UL)
   {
 #if defined(COMP2)
     /* Check whether comparator is in independent or window mode */
-    if(READ_BIT(COMP12_COMMON->CSR, COMP_CSR_WINMODE) != 0UL)
+    if (READ_BIT(COMP12_COMMON->CSR, COMP_CSR_WINMODE) != 0UL)
     {
       /* Clear COMP EXTI line pending bit of the pair of comparators          */
       /* in window mode.                                                      */
@@ -894,11 +896,11 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the COMP handle allocation and lock status */
-  if(hcomp == NULL)
+  if (hcomp == NULL)
   {
     status = HAL_ERROR;
   }
-  else if(__HAL_COMP_IS_LOCKED(hcomp))
+  else if (__HAL_COMP_IS_LOCKED(hcomp))
   {
     status = HAL_ERROR;
   }
@@ -908,7 +910,7 @@
     assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
 
     /* Set HAL COMP handle state */
-    switch(hcomp->State)
+    switch (hcomp->State)
     {
       case HAL_COMP_STATE_RESET:
         hcomp->State = HAL_COMP_STATE_RESET_LOCKED;
@@ -920,10 +922,7 @@
         hcomp->State = HAL_COMP_STATE_BUSY_LOCKED;
         break;
     }
-  }
 
-  if(status == HAL_OK)
-  {
     /* Set the lock bit corresponding to selected comparator */
     __HAL_COMP_LOCK(hcomp);
   }
@@ -950,7 +949,7 @@
   *         @arg COMP_OUTPUT_LEVEL_HIGH
   *
   */
-uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp)
+uint32_t HAL_COMP_GetOutputLevel(const COMP_HandleTypeDef *hcomp)
 {
   /* Check the parameter */
   assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
@@ -998,10 +997,10 @@
   * @param  hcomp  COMP handle
   * @retval HAL state
   */
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp)
+HAL_COMP_StateTypeDef HAL_COMP_GetState(const COMP_HandleTypeDef *hcomp)
 {
   /* Check the COMP handle allocation */
-  if(hcomp == NULL)
+  if (hcomp == NULL)
   {
     return HAL_COMP_STATE_RESET;
   }
@@ -1018,7 +1017,7 @@
   * @param hcomp COMP handle
   * @retval COMP error code
   */
-uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp)
+uint32_t HAL_COMP_GetError(const COMP_HandleTypeDef *hcomp)
 {
   /* Check the parameters */
   assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
diff --git a/Src/stm32l4xx_hal_crc.c b/Src/stm32l4xx_hal_crc.c
index 8e14df5..0382661 100644
--- a/Src/stm32l4xx_hal_crc.c
+++ b/Src/stm32l4xx_hal_crc.c
@@ -199,9 +199,15 @@
   /* Reset CRC calculation unit */
   __HAL_CRC_DR_RESET(hcrc);
 
+#if defined(CRC_IDR32BITSLENGTH_SUPPORT)
+  /* Reset IDR register content */
+  __HAL_CRC_SET_IDR(hcrc, 0);
+
+#else
   /* Reset IDR register content */
   CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR);
 
+#endif /* CRC_IDR32BITSLENGTH_SUPPORT */
   /* DeInit the low level hardware */
   HAL_CRC_MspDeInit(hcrc);
 
@@ -403,7 +409,7 @@
   * @param  hcrc CRC handle
   * @retval HAL state
   */
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
+HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc)
 {
   /* Return CRC handle state */
   return hcrc->State;
diff --git a/Src/stm32l4xx_hal_crc_ex.c b/Src/stm32l4xx_hal_crc_ex.c
index 17a5851..ffe13b1 100644
--- a/Src/stm32l4xx_hal_crc_ex.c
+++ b/Src/stm32l4xx_hal_crc_ex.c
@@ -94,7 +94,7 @@
   /* Check the parameters */
   assert_param(IS_CRC_POL_LENGTH(PolyLength));
 
-  /* Ensure that the generating polynomial is odd */ 
+  /* Ensure that the generating polynomial is odd */
   if ((Pol & (uint32_t)(0x1U)) ==  0U)
   {
     status =  HAL_ERROR;
@@ -114,7 +114,7 @@
 
     switch (PolyLength)
     {
-          
+
       case CRC_POLYLENGTH_7B:
         if (msb >= HAL_CRC_LENGTH_7B)
         {
@@ -133,7 +133,7 @@
           status =   HAL_ERROR;
         }
         break;
- 
+
       case CRC_POLYLENGTH_32B:
         /* no polynomial definition vs. polynomial length issue possible */
         break;
diff --git a/Src/stm32l4xx_hal_cryp_ex.c b/Src/stm32l4xx_hal_cryp_ex.c
index da1a6eb..abe65c8 100644
--- a/Src/stm32l4xx_hal_cryp_ex.c
+++ b/Src/stm32l4xx_hal_cryp_ex.c
@@ -2458,7 +2458,7 @@
             intermediate_data[((difflength+3U)/4U)+index] = 0;
           }
 
-          /* Insert intermediate data to trigger an additional DOUTR reading round */
+          /* Insert intermediate data to trigger an additional Data Output register reading round */
           /* Clear Computation Complete Flag before entering new block */
           __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR);
           for(index=0U ; index < 4U; index ++)
@@ -2513,7 +2513,7 @@
 #if !defined(AES_CR_NPBLB)
         else
         {
-          /* Software work-around: additional DOUTR reading round to discard the data */
+          /* Software work-around: additional Data Output Register reading round to discard the data */
           for(index=0U ; index < 4U; index ++)
           {
             intermediate_data[index] = hcryp->Instance->DOUTR;
@@ -3206,7 +3206,7 @@
         hcryp->Instance->DINR = intermediate_data[index];
       }
 
-      /*  Wait for completion, and read data on DOUT. This data is to discard. */
+      /*  Wait for completion, and read data on Data Output Register. This data is to discard. */
       if(CRYP_WaitOnCCFlag(hcryp, CRYP_CCF_TIMEOUTVALUE) != HAL_OK)
       {
         hcryp->State = HAL_CRYP_STATE_READY;
diff --git a/Src/stm32l4xx_hal_dma.c b/Src/stm32l4xx_hal_dma.c
index c0f1fab..d476444 100644
--- a/Src/stm32l4xx_hal_dma.c
+++ b/Src/stm32l4xx_hal_dma.c
@@ -156,7 +156,7 @@
   uint32_t tmp;
 
   /* Check the DMA handle allocation */
-  if(hdma == NULL)
+  if (hdma == NULL)
   {
     return HAL_ERROR;
   }
@@ -213,7 +213,7 @@
   */
   DMA_CalcDMAMUXChannelBaseAndMask(hdma);
 
-  if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+  if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
   {
     /* if memory to memory force the request to 0*/
     hdma->Init.Request = DMA_REQUEST_MEM2MEM;
@@ -225,7 +225,7 @@
   /* Clear the DMAMUX synchro overrun flag */
   hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
 
-  if(((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3)))
+  if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3)))
   {
     /* Initialize parameters for DMAMUX request generator :
        DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask
@@ -249,7 +249,7 @@
 #if !defined (DMAMUX1)
 
   /* Set request selection */
-  if(hdma->Init.Direction != DMA_MEMORY_TO_MEMORY)
+  if (hdma->Init.Direction != DMA_MEMORY_TO_MEMORY)
   {
     /* Write to DMA channel selection register */
     if (DMA1 == hdma->DmaBaseAddress)
@@ -258,7 +258,7 @@
       DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU));
 
       /* Configure request selection for DMA1 Channelx */
-      DMA1_CSELR->CSELR |= (uint32_t) (hdma->Init.Request << (hdma->ChannelIndex & 0x1cU));
+      DMA1_CSELR->CSELR |= (uint32_t)(hdma->Init.Request << (hdma->ChannelIndex & 0x1cU));
     }
     else /* DMA2 */
     {
@@ -266,13 +266,13 @@
       DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU));
 
       /* Configure request selection for DMA2 Channelx */
-      DMA2_CSELR->CSELR |= (uint32_t) (hdma->Init.Request << (hdma->ChannelIndex & 0x1cU));
+      DMA2_CSELR->CSELR |= (uint32_t)(hdma->Init.Request << (hdma->ChannelIndex & 0x1cU));
     }
   }
 
 #endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */
-       /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */
-       /* STM32L496xx || STM32L4A6xx                                              */
+  /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */
+  /* STM32L496xx || STM32L4A6xx                                              */
 
   /* Initialise the error code */
   hdma->ErrorCode = HAL_DMA_ERROR_NONE;
@@ -296,7 +296,7 @@
 {
 
   /* Check the DMA handle allocation */
-  if (NULL == hdma )
+  if (NULL == hdma)
   {
     return HAL_ERROR;
   }
@@ -341,8 +341,8 @@
     DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU));
   }
 #endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */
-       /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */
-       /* STM32L496xx || STM32L4A6xx                                              */
+  /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */
+  /* STM32L496xx || STM32L4A6xx                                              */
 
 #if defined(DMAMUX1)
 
@@ -358,7 +358,7 @@
   hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
 
   /* Reset Request generator parameters if any */
-  if(((hdma->Init.Request >  0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3)))
+  if (((hdma->Init.Request >  0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3)))
   {
     /* Initialize parameters for DMAMUX request generator :
        DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask
@@ -438,7 +438,7 @@
   /* Process locked */
   __HAL_LOCK(hdma);
 
-  if(HAL_DMA_STATE_READY == hdma->State)
+  if (HAL_DMA_STATE_READY == hdma->State)
   {
     /* Change DMA peripheral state */
     hdma->State = HAL_DMA_STATE_BUSY;
@@ -481,7 +481,7 @@
   /* Process locked */
   __HAL_LOCK(hdma);
 
-  if(HAL_DMA_STATE_READY == hdma->State)
+  if (HAL_DMA_STATE_READY == hdma->State)
   {
     /* Change DMA peripheral state */
     hdma->State = HAL_DMA_STATE_BUSY;
@@ -495,7 +495,7 @@
 
     /* Enable the transfer complete interrupt */
     /* Enable the transfer Error interrupt */
-    if(NULL != hdma->XferHalfCpltCallback )
+    if (NULL != hdma->XferHalfCpltCallback)
     {
       /* Enable the Half transfer complete interrupt as well */
       __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE));
@@ -509,13 +509,13 @@
 #ifdef DMAMUX1
 
     /* Check if DMAMUX Synchronization is enabled*/
-    if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U)
+    if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U)
     {
       /* Enable DMAMUX sync overrun IT*/
       hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE;
     }
 
-    if(hdma->DMAmuxRequestGen != 0U)
+    if (hdma->DMAmuxRequestGen != 0U)
     {
       /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/
       /* enable the request gen overrun IT*/
@@ -549,7 +549,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the DMA peripheral state */
-  if(hdma->State != HAL_DMA_STATE_BUSY)
+  if (hdma->State != HAL_DMA_STATE_BUSY)
   {
     hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
 
@@ -578,7 +578,7 @@
     /* Clear the DMAMUX synchro overrun flag */
     hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
 
-    if(hdma->DMAmuxRequestGen != 0U)
+    if (hdma->DMAmuxRequestGen != 0U)
     {
       /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/
       /* disable the request gen overrun IT*/
@@ -610,7 +610,7 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  if(HAL_DMA_STATE_BUSY != hdma->State)
+  if (HAL_DMA_STATE_BUSY != hdma->State)
   {
     /* no transfer ongoing */
     hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
@@ -635,7 +635,7 @@
     /* Clear the DMAMUX synchro overrun flag */
     hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
 
-    if(hdma->DMAmuxRequestGen != 0U)
+    if (hdma->DMAmuxRequestGen != 0U)
     {
       /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/
       /* disable the request gen overrun IT*/
@@ -657,7 +657,7 @@
     __HAL_UNLOCK(hdma);
 
     /* Call User Abort callback */
-    if(hdma->XferAbortCallback != NULL)
+    if (hdma->XferAbortCallback != NULL)
     {
       hdma->XferAbortCallback(hdma);
     }
@@ -678,7 +678,7 @@
   uint32_t temp;
   uint32_t tickstart;
 
-  if(HAL_DMA_STATE_BUSY != hdma->State)
+  if (HAL_DMA_STATE_BUSY != hdma->State)
   {
     /* no transfer ongoing */
     hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
@@ -708,9 +708,9 @@
   /* Get tick */
   tickstart = HAL_GetTick();
 
-  while((hdma->DmaBaseAddress->ISR & temp) == 0U)
+  while ((hdma->DmaBaseAddress->ISR & temp) == 0U)
   {
-    if((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex& 0x1CU))) != 0U)
+    if ((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U)
     {
       /* When a DMA transfer error occurs */
       /* A hardware clear of its EN bits is performed */
@@ -721,7 +721,7 @@
       hdma->ErrorCode = HAL_DMA_ERROR_TE;
 
       /* Change the DMA state */
-      hdma->State= HAL_DMA_STATE_READY;
+      hdma->State = HAL_DMA_STATE_READY;
 
       /* Process Unlocked */
       __HAL_UNLOCK(hdma);
@@ -729,9 +729,9 @@
       return HAL_ERROR;
     }
     /* Check for the Timeout */
-    if(Timeout != HAL_MAX_DELAY)
+    if (Timeout != HAL_MAX_DELAY)
     {
-      if(((HAL_GetTick() - tickstart) > Timeout) ||  (Timeout == 0U))
+      if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
       {
         /* Update error code */
         hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
@@ -749,10 +749,10 @@
 
 #if defined(DMAMUX1)
   /*Check for DMAMUX Request generator (if used) overrun status */
-  if(hdma->DMAmuxRequestGen != 0U)
+  if (hdma->DMAmuxRequestGen != 0U)
   {
     /* if using DMAMUX request generator Check for DMAMUX request generator overrun */
-    if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
+    if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
     {
       /* Disable the request gen overrun interrupt */
       hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE;
@@ -766,7 +766,7 @@
   }
 
   /* Check for DMAMUX Synchronization overrun */
-  if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
+  if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
   {
     /* Clear the DMAMUX synchro overrun flag */
     hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
@@ -776,10 +776,10 @@
   }
 #endif /* DMAMUX1 */
 
-  if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+  if (HAL_DMA_FULL_TRANSFER == CompleteLevel)
   {
     /* Clear the transfer complete flag */
-    hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex& 0x1CU));
+    hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU));
 
     /* Process unlocked */
     __HAL_UNLOCK(hdma);
@@ -811,29 +811,29 @@
   /* Half Transfer Complete Interrupt management ******************************/
   if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U))
   {
-      /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
-      if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
-      {
-        /* Disable the half transfer interrupt */
-        __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
-      }
-      /* Clear the half transfer complete flag */
-      hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU);
+    /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+    if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+    {
+      /* Disable the half transfer interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
+    }
+    /* Clear the half transfer complete flag */
+    hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU);
 
-      /* DMA peripheral state is not updated in Half Transfer */
-      /* but in Transfer Complete case */
+    /* DMA peripheral state is not updated in Half Transfer */
+    /* but in Transfer Complete case */
 
-      if(hdma->XferHalfCpltCallback != NULL)
-      {
-        /* Half transfer callback */
-        hdma->XferHalfCpltCallback(hdma);
-      }
+    if (hdma->XferHalfCpltCallback != NULL)
+    {
+      /* Half transfer callback */
+      hdma->XferHalfCpltCallback(hdma);
+    }
   }
 
   /* Transfer Complete Interrupt management ***********************************/
   else if (((flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TC) != 0U))
   {
-    if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+    if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
     {
       /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
       /* Disable the transfer complete and error interrupt */
@@ -849,7 +849,7 @@
     /* Process Unlocked */
     __HAL_UNLOCK(hdma);
 
-    if(hdma->XferCpltCallback != NULL)
+    if (hdma->XferCpltCallback != NULL)
     {
       /* Transfer complete callback */
       hdma->XferCpltCallback(hdma);
@@ -899,36 +899,36 @@
   *                               a DMA_HandleTypeDef structure as parameter.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma))
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma))
 {
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Process locked */
   __HAL_LOCK(hdma);
 
-  if(HAL_DMA_STATE_READY == hdma->State)
+  if (HAL_DMA_STATE_READY == hdma->State)
   {
     switch (CallbackID)
     {
-     case  HAL_DMA_XFER_CPLT_CB_ID:
-           hdma->XferCpltCallback = pCallback;
-           break;
+      case  HAL_DMA_XFER_CPLT_CB_ID:
+        hdma->XferCpltCallback = pCallback;
+        break;
 
-     case  HAL_DMA_XFER_HALFCPLT_CB_ID:
-           hdma->XferHalfCpltCallback = pCallback;
-           break;
+      case  HAL_DMA_XFER_HALFCPLT_CB_ID:
+        hdma->XferHalfCpltCallback = pCallback;
+        break;
 
-     case  HAL_DMA_XFER_ERROR_CB_ID:
-           hdma->XferErrorCallback = pCallback;
-           break;
+      case  HAL_DMA_XFER_ERROR_CB_ID:
+        hdma->XferErrorCallback = pCallback;
+        break;
 
-     case  HAL_DMA_XFER_ABORT_CB_ID:
-           hdma->XferAbortCallback = pCallback;
-           break;
+      case  HAL_DMA_XFER_ABORT_CB_ID:
+        hdma->XferAbortCallback = pCallback;
+        break;
 
-     default:
-           status = HAL_ERROR;
-           break;
+      default:
+        status = HAL_ERROR;
+        break;
     }
   }
   else
@@ -954,39 +954,39 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-    /* Process locked */
+  /* Process locked */
   __HAL_LOCK(hdma);
 
-  if(HAL_DMA_STATE_READY == hdma->State)
+  if (HAL_DMA_STATE_READY == hdma->State)
   {
     switch (CallbackID)
     {
-     case  HAL_DMA_XFER_CPLT_CB_ID:
-           hdma->XferCpltCallback = NULL;
-           break;
+      case  HAL_DMA_XFER_CPLT_CB_ID:
+        hdma->XferCpltCallback = NULL;
+        break;
 
-     case  HAL_DMA_XFER_HALFCPLT_CB_ID:
-           hdma->XferHalfCpltCallback = NULL;
-           break;
+      case  HAL_DMA_XFER_HALFCPLT_CB_ID:
+        hdma->XferHalfCpltCallback = NULL;
+        break;
 
-     case  HAL_DMA_XFER_ERROR_CB_ID:
-           hdma->XferErrorCallback = NULL;
-           break;
+      case  HAL_DMA_XFER_ERROR_CB_ID:
+        hdma->XferErrorCallback = NULL;
+        break;
 
-     case  HAL_DMA_XFER_ABORT_CB_ID:
-           hdma->XferAbortCallback = NULL;
-           break;
+      case  HAL_DMA_XFER_ABORT_CB_ID:
+        hdma->XferAbortCallback = NULL;
+        break;
 
-    case   HAL_DMA_XFER_ALL_CB_ID:
-           hdma->XferCpltCallback = NULL;
-           hdma->XferHalfCpltCallback = NULL;
-           hdma->XferErrorCallback = NULL;
-           hdma->XferAbortCallback = NULL;
-           break;
+      case   HAL_DMA_XFER_ALL_CB_ID:
+        hdma->XferCpltCallback = NULL;
+        hdma->XferHalfCpltCallback = NULL;
+        hdma->XferErrorCallback = NULL;
+        hdma->XferAbortCallback = NULL;
+        break;
 
-    default:
-           status = HAL_ERROR;
-           break;
+      default:
+        status = HAL_ERROR;
+        break;
     }
   }
   else
@@ -1072,7 +1072,7 @@
   /* Clear the DMAMUX synchro overrun flag */
   hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
 
-  if(hdma->DMAmuxRequestGen != 0U)
+  if (hdma->DMAmuxRequestGen != 0U)
   {
     /* Clear the DMAMUX request generator overrun flag */
     hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
@@ -1086,7 +1086,7 @@
   hdma->Instance->CNDTR = DataLength;
 
   /* Memory to Peripheral */
-  if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
   {
     /* Configure DMA Channel destination address */
     hdma->Instance->CPAR = DstAddress;
diff --git a/Src/stm32l4xx_hal_dma2d.c b/Src/stm32l4xx_hal_dma2d.c
index 1f601e3..bee6849 100644
--- a/Src/stm32l4xx_hal_dma2d.c
+++ b/Src/stm32l4xx_hal_dma2d.c
@@ -118,7 +118,7 @@
           and a pointer to the user callback function.
 
       (#) Use function @ref HAL_DMA2D_UnRegisterCallback() to reset a callback to the default
-          weak (surcharged) function.
+          weak (overridden) function.
           @ref HAL_DMA2D_UnRegisterCallback() takes as parameters the HAL peripheral handle,
           and the Callback ID.
           This function allows to reset following callbacks:
@@ -130,16 +130,16 @@
             (+) MspDeInitCallback  : DMA2D MspDeInit.
 
       (#) By default, after the @ref HAL_DMA2D_Init and if the state is HAL_DMA2D_STATE_RESET
-          all callbacks are reset to the corresponding legacy weak (surcharged) functions:
+          all callbacks are reset to the corresponding legacy weak (overridden) functions:
           examples @ref HAL_DMA2D_LineEventCallback(), @ref HAL_DMA2D_CLUTLoadingCpltCallback()
           Exception done for MspInit and MspDeInit callbacks that are respectively
-          reset to the legacy weak (surcharged) functions in the @ref HAL_DMA2D_Init
+          reset to the legacy weak (overridden) functions in the @ref HAL_DMA2D_Init
           and @ref HAL_DMA2D_DeInit only when these callbacks are null (not registered beforehand)
           If not, MspInit or MspDeInit are not null, the @ref HAL_DMA2D_Init and @ref HAL_DMA2D_DeInit
           keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
 
           Exception as well for Transfer Completion and Transfer Error callbacks that are not defined
-          as weak (surcharged) functions. They must be defined by the user to be resorted to.
+          as weak (overridden) functions. They must be defined by the user to be resorted to.
 
           Callbacks can be registered/unregistered in READY state only.
           Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
@@ -151,7 +151,7 @@
 
           When The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS is set to 0 or
           not defined, the callback registering feature is not available
-          and weak (surcharged) callbacks are used.
+          and weak (overridden) callbacks are used.
 
      [..]
       (@) You can refer to the DMA2D HAL driver header file for more useful macros
@@ -443,7 +443,7 @@
 #if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User DMA2D Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used instead of the weak (overridden) predefined callback
   * @param hdma2d DMA2D handle
   * @param CallbackID ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -542,7 +542,7 @@
 
 /**
   * @brief  Unregister a DMA2D Callback
-  *         DMA2D Callback is redirected to the weak (surcharged) predefined callback
+  *         DMA2D Callback is redirected to the weak (overridden) predefined callback
   * @param hdma2d DMA2D handle
   * @param CallbackID ID of the callback to be unregistered
   *        This parameter can be one of the following values:
@@ -583,11 +583,11 @@
         break;
 
       case HAL_DMA2D_MSPINIT_CB_ID :
-        hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */
+        hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (overridden) Msp Init */
         break;
 
       case HAL_DMA2D_MSPDEINIT_CB_ID :
-        hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */
+        hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (overridden) Msp DeInit */
         break;
 
       default :
@@ -603,11 +603,11 @@
     switch (CallbackID)
     {
       case HAL_DMA2D_MSPINIT_CB_ID :
-        hdma2d->MspInitCallback = HAL_DMA2D_MspInit;   /* Legacy weak (surcharged) Msp Init */
+        hdma2d->MspInitCallback = HAL_DMA2D_MspInit;   /* Legacy weak (overridden) Msp Init */
         break;
 
       case HAL_DMA2D_MSPDEINIT_CB_ID :
-        hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit;  /* Legacy weak (surcharged) Msp DeInit */
+        hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit;  /* Legacy weak (overridden) Msp DeInit */
         break;
 
       default :
diff --git a/Src/stm32l4xx_hal_dma_ex.c b/Src/stm32l4xx_hal_dma_ex.c
index e6684a2..260d972 100644
--- a/Src/stm32l4xx_hal_dma_ex.c
+++ b/Src/stm32l4xx_hal_dma_ex.c
@@ -114,17 +114,17 @@
   assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber));
 
   /*Check if the DMA state is ready */
-  if(hdma->State == HAL_DMA_STATE_READY)
+  if (hdma->State == HAL_DMA_STATE_READY)
   {
     /* Process Locked */
     __HAL_LOCK(hdma);
 
     /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/
-    MODIFY_REG( hdma->DMAmuxChannel->CCR, \
-               (~DMAMUX_CxCR_DMAREQ_ID) , \
+    MODIFY_REG(hdma->DMAmuxChannel->CCR, \
+               (~DMAMUX_CxCR_DMAREQ_ID), \
                ((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \
                pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \
-                 ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos));
+               ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos));
 
     /* Process UnLocked */
     __HAL_UNLOCK(hdma);
@@ -147,7 +147,7 @@
   *
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
 {
   /* Check the parameters */
   assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
@@ -160,24 +160,24 @@
   /* check if the DMA state is ready
      and DMA is using a DMAMUX request generator block
   */
-  if((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U))
+  if ((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U))
   {
     /* Process Locked */
     __HAL_LOCK(hdma);
 
     /* Set the request generator new parameters */
     hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \
-                                  ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos)| \
-                                  pRequestGeneratorConfig->Polarity;
-   /* Process UnLocked */
-   __HAL_UNLOCK(hdma);
+                                   ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \
+                                   pRequestGeneratorConfig->Polarity;
+    /* Process UnLocked */
+    __HAL_UNLOCK(hdma);
 
-   return HAL_OK;
- }
- else
- {
-   return HAL_ERROR;
- }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
 }
 
 /**
@@ -186,7 +186,7 @@
   *              the configuration information for the specified DMA channel.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma)
+HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
 {
   /* Check the parameters */
   assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
@@ -194,18 +194,18 @@
   /* check if the DMA state is ready
      and DMA is using a DMAMUX request generator block
   */
-  if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
+  if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
   {
 
     /* Enable the request generator*/
     hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE;
 
-   return HAL_OK;
- }
- else
- {
-   return HAL_ERROR;
- }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
 }
 
 /**
@@ -214,7 +214,7 @@
   *              the configuration information for the specified DMA channel.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma)
+HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
 {
   /* Check the parameters */
   assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
@@ -222,7 +222,7 @@
   /* check if the DMA state is ready
      and DMA is using a DMAMUX request generator block
   */
-  if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
+  if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
   {
 
     /* Disable the request generator*/
@@ -245,7 +245,7 @@
 void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma)
 {
   /* Check for DMAMUX Synchronization overrun */
-  if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
+  if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
   {
     /* Disable the synchro overrun interrupt */
     hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE;
@@ -256,17 +256,17 @@
     /* Update error code */
     hdma->ErrorCode |= HAL_DMA_ERROR_SYNC;
 
-    if(hdma->XferErrorCallback != NULL)
+    if (hdma->XferErrorCallback != NULL)
     {
       /* Transfer error callback */
       hdma->XferErrorCallback(hdma);
     }
   }
 
-  if(hdma->DMAmuxRequestGen != 0)
+  if (hdma->DMAmuxRequestGen != 0)
   {
-   /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
-    if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
+    /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
+    if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
     {
       /* Disable the request gen overrun interrupt */
       hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE;
@@ -277,7 +277,7 @@
       /* Update error code */
       hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN;
 
-      if(hdma->XferErrorCallback != NULL)
+      if (hdma->XferErrorCallback != NULL)
       {
         /* Transfer error callback */
         hdma->XferErrorCallback(hdma);
diff --git a/Src/stm32l4xx_hal_dsi.c b/Src/stm32l4xx_hal_dsi.c
index b3154c1..ddb6442 100644
--- a/Src/stm32l4xx_hal_dsi.c
+++ b/Src/stm32l4xx_hal_dsi.c
@@ -1852,6 +1852,16 @@
     __HAL_UNLOCK(hdsi);
     return HAL_ERROR;
   }
+  else if ((hdsi->Instance->WRPCR & DSI_WRPCR_REGEN) != DSI_WRPCR_REGEN)
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdsi);
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Nothing to do */
+  }
 
   /* Verify that there are no ULPS exit or request on data lanes */
   if ((hdsi->Instance->PUCR & (DSI_PUCR_UEDL | DSI_PUCR_URDL)) != 0U)
@@ -2170,6 +2180,16 @@
     __HAL_UNLOCK(hdsi);
     return HAL_ERROR;
   }
+  else if ((hdsi->Instance->WRPCR & DSI_WRPCR_REGEN) != DSI_WRPCR_REGEN)
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdsi);
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Nothing to do */
+  }
 
   /* Verify that there are no ULPS exit or request on both data and clock lanes */
   if ((hdsi->Instance->PUCR & (DSI_PUCR_UEDL | DSI_PUCR_URDL | DSI_PUCR_UECL | DSI_PUCR_URCL)) != 0U)
diff --git a/Src/stm32l4xx_hal_exti.c b/Src/stm32l4xx_hal_exti.c
index 295067a..a546ca1 100644
--- a/Src/stm32l4xx_hal_exti.c
+++ b/Src/stm32l4xx_hal_exti.c
@@ -64,7 +64,7 @@
         (++) Provide exiting handle as parameter.
         (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
 
-    (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
+    (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine().
         (++) Provide exiting handle as parameter.
 
     (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
@@ -75,7 +75,7 @@
 
     (#) Get interrupt pending bit using HAL_EXTI_GetPending().
 
-    (#) Clear interrupt pending bit using HAL_EXTI_GetPending().
+    (#) Clear interrupt pending bit using HAL_EXTI_ClearPending().
 
     (#) Generate software interrupt using HAL_EXTI_GenerateSWI().
 
@@ -538,6 +538,9 @@
   uint32_t maskline;
   uint32_t offset;
 
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(Edge);
+
   /* Check parameters */
   assert_param(IS_EXTI_LINE(hexti->Line));
   assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
@@ -572,6 +575,9 @@
   uint32_t maskline;
   uint32_t offset;
 
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(Edge);
+
   /* Check parameters */
   assert_param(IS_EXTI_LINE(hexti->Line));
   assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
diff --git a/Src/stm32l4xx_hal_hcd.c b/Src/stm32l4xx_hal_hcd.c
index 301d46d..b3eb1c6 100644
--- a/Src/stm32l4xx_hal_hcd.c
+++ b/Src/stm32l4xx_hal_hcd.c
@@ -193,24 +193,21 @@
   *          This parameter can be a value from 0 to32K
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
-                                  uint8_t ch_num,
-                                  uint8_t epnum,
-                                  uint8_t dev_address,
-                                  uint8_t speed,
-                                  uint8_t ep_type,
-                                  uint16_t mps)
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t epnum,
+                                  uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps)
 {
   HAL_StatusTypeDef status;
+  uint32_t HCcharMps = mps;
 
   __HAL_LOCK(hhcd);
   hhcd->hc[ch_num].do_ping = 0U;
   hhcd->hc[ch_num].dev_addr = dev_address;
-  hhcd->hc[ch_num].max_packet = mps;
   hhcd->hc[ch_num].ch_num = ch_num;
   hhcd->hc[ch_num].ep_type = ep_type;
   hhcd->hc[ch_num].ep_num = epnum & 0x7FU;
 
+  (void)HAL_HCD_HC_ClearHubInfo(hhcd, ch_num);
+
   if ((epnum & 0x80U) == 0x80U)
   {
     hhcd->hc[ch_num].ep_is_in = 1U;
@@ -221,14 +218,11 @@
   }
 
   hhcd->hc[ch_num].speed = speed;
+  hhcd->hc[ch_num].max_packet = (uint16_t)HCcharMps;
 
-  status =  USB_HC_Init(hhcd->Instance,
-                        ch_num,
-                        epnum,
-                        dev_address,
-                        speed,
-                        ep_type,
-                        mps);
+  status =  USB_HC_Init(hhcd->Instance, ch_num, epnum,
+                        dev_address, speed, ep_type, (uint16_t)HCcharMps);
+
   __HAL_UNLOCK(hhcd);
 
   return status;
@@ -246,7 +240,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   __HAL_LOCK(hhcd);
-  (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+  (void)USB_HC_Halt(hhcd->Instance, ch_num);
   __HAL_UNLOCK(hhcd);
 
   return status;
@@ -385,24 +379,27 @@
   switch (ep_type)
   {
     case EP_TYPE_CTRL:
-      if ((token == 1U) && (direction == 0U)) /*send data */
+      if (token == 1U) /* send data */
       {
-        if (length == 0U)
+        if (direction == 0U)
         {
-          /* For Status OUT stage, Length==0, Status Out PID = 1 */
-          hhcd->hc[ch_num].toggle_out = 1U;
-        }
+          if (length == 0U)
+          {
+            /* For Status OUT stage, Length == 0U, Status Out PID = 1 */
+            hhcd->hc[ch_num].toggle_out = 1U;
+          }
 
-        /* Set the Data Toggle bit as per the Flag */
-        if (hhcd->hc[ch_num].toggle_out == 0U)
-        {
-          /* Put the PID 0 */
-          hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
-        }
-        else
-        {
-          /* Put the PID 1 */
-          hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+          /* Set the Data Toggle bit as per the Flag */
+          if (hhcd->hc[ch_num].toggle_out == 0U)
+          {
+            /* Put the PID 0 */
+            hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+          }
+          else
+          {
+            /* Put the PID 1 */
+            hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+          }
         }
       }
       break;
@@ -537,8 +534,11 @@
         (void)USB_FlushTxFifo(USBx, 0x10U);
         (void)USB_FlushRxFifo(USBx);
 
-        /* Restore FS Clock */
-        (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ);
+        if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
+        {
+          /* Restore FS Clock */
+          (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ);
+        }
 
         /* Handle Host Port Disconnect Interrupt */
 #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
@@ -567,16 +567,6 @@
       __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
     }
 
-    /* Handle Rx Queue Level Interrupts */
-    if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
-    {
-      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
-
-      HCD_RXQLVL_IRQHandler(hhcd);
-
-      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
-    }
-
     /* Handle Host channel Interrupt */
     if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
     {
@@ -597,6 +587,16 @@
       }
       __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
     }
+
+    /* Handle Rx Queue Level Interrupts */
+    if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
+    {
+      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+      HCD_RXQLVL_IRQHandler(hhcd);
+
+      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+    }
   }
 }
 
@@ -1069,7 +1069,7 @@
   * @param  hhcd HCD handle
   * @retval HAL state
   */
-HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef const *hhcd)
 {
   return hhcd->State;
 }
@@ -1088,7 +1088,7 @@
   *            URB_ERROR/
   *            URB_STALL
   */
-HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef const *hhcd, uint8_t chnum)
 {
   return hhcd->hc[chnum].urb_state;
 }
@@ -1101,7 +1101,7 @@
   *         This parameter can be a value from 1 to 15
   * @retval last transfer size in byte
   */
-uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef const *hhcd, uint8_t chnum)
 {
   return hhcd->hc[chnum].xfer_count;
 }
@@ -1123,7 +1123,7 @@
   *            HC_BBLERR/
   *            HC_DATATGLERR
   */
-HCD_HCStateTypeDef  HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+HCD_HCStateTypeDef  HAL_HCD_HC_GetState(HCD_HandleTypeDef const *hhcd, uint8_t chnum)
 {
   return hhcd->hc[chnum].state;
 }
@@ -1149,6 +1149,39 @@
 }
 
 /**
+  * @brief  Set host channel Hub information.
+  * @param  hhcd HCD handle
+  * @param  ch_num Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  addr Hub address
+  * @param  PortNbr Hub port number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_SetHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
+                                        uint8_t addr, uint8_t PortNbr)
+{
+  hhcd->hc[ch_num].hub_addr = addr;
+  hhcd->hc[ch_num].hub_port_nbr = PortNbr;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Clear host channel hub information.
+  * @param  hhcd HCD handle
+  * @param  ch_num Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_ClearHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
+{
+  hhcd->hc[ch_num].hub_addr = 0U;
+  hhcd->hc[ch_num].hub_port_nbr = 0U;
+
+  return HAL_OK;
+}
+/**
   * @}
   */
 
@@ -1170,76 +1203,70 @@
 {
   USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
   uint32_t USBx_BASE = (uint32_t)USBx;
-  uint32_t ch_num = (uint32_t)chnum;
-
   uint32_t tmpreg;
 
-  if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR)
+  if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_AHBERR))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_AHBERR);
-    hhcd->hc[ch_num].state = HC_XACTERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+    hhcd->hc[chnum].state = HC_XACTERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_BBERR) == USB_OTG_HCINT_BBERR)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_BBERR))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_BBERR);
-    hhcd->hc[ch_num].state = HC_BBLERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_BBERR);
+    hhcd->hc[chnum].state = HC_BBLERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_ACK) == USB_OTG_HCINT_ACK)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_STALL))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_ACK);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+    hhcd->hc[chnum].state = HC_STALL;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_DTERR))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL);
-    hhcd->hc[ch_num].state = HC_STALL;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+    hhcd->hc[chnum].state = HC_DATATGLERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_TXERR))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR);
-    hhcd->hc[ch_num].state = HC_DATATGLERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-  }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
-  {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
-    hhcd->hc[ch_num].state = HC_XACTERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+    hhcd->hc[chnum].state = HC_XACTERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
   else
   {
     /* ... */
   }
 
-  if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR)
+  if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_FRMOR))
   {
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR);
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_XFRC))
   {
-    hhcd->hc[ch_num].state = HC_XFRC;
-    hhcd->hc[ch_num].ErrCnt = 0U;
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC);
+    hhcd->hc[chnum].state = HC_XFRC;
+    hhcd->hc[chnum].ErrCnt = 0U;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
 
-    if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) ||
-        (hhcd->hc[ch_num].ep_type == EP_TYPE_BULK))
+    if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
+        (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
     {
-      (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-      __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
+      (void)USB_HC_Halt(hhcd->Instance, chnum);
+      __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
     }
-    else if ((hhcd->hc[ch_num].ep_type == EP_TYPE_INTR) ||
-             (hhcd->hc[ch_num].ep_type == EP_TYPE_ISOC))
+    else if ((hhcd->hc[chnum].ep_type == EP_TYPE_INTR) ||
+             (hhcd->hc[chnum].ep_type == EP_TYPE_ISOC))
     {
-      USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
-      hhcd->hc[ch_num].urb_state = URB_DONE;
+      USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
+      hhcd->hc[chnum].urb_state = URB_DONE;
 
 #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
-      hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
+      hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state);
 #else
-      HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
+      HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
 #endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
     }
     else
@@ -1249,92 +1276,131 @@
 
     if (hhcd->Init.dma_enable == 1U)
     {
-      if (((hhcd->hc[ch_num].XferSize / hhcd->hc[ch_num].max_packet) & 1U) != 0U)
+      if ((((hhcd->hc[chnum].xfer_count + hhcd->hc[chnum].max_packet - 1U) / hhcd->hc[chnum].max_packet) & 1U) != 0U)
       {
-        hhcd->hc[ch_num].toggle_in ^= 1U;
+        hhcd->hc[chnum].toggle_in ^= 1U;
       }
     }
     else
     {
-      hhcd->hc[ch_num].toggle_in ^= 1U;
+      hhcd->hc[chnum].toggle_in ^= 1U;
     }
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_ACK))
   {
-    if (hhcd->hc[ch_num].state == HC_XFRC)
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+  }
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_CHH))
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+
+    if (hhcd->hc[chnum].state == HC_XFRC)
     {
-      hhcd->hc[ch_num].urb_state = URB_DONE;
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].urb_state = URB_DONE;
     }
-    else if (hhcd->hc[ch_num].state == HC_STALL)
+    else if (hhcd->hc[chnum].state == HC_STALL)
     {
-      hhcd->hc[ch_num].urb_state = URB_STALL;
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].urb_state = URB_STALL;
     }
-    else if ((hhcd->hc[ch_num].state == HC_XACTERR) ||
-             (hhcd->hc[ch_num].state == HC_DATATGLERR))
+    else if ((hhcd->hc[chnum].state == HC_XACTERR) ||
+             (hhcd->hc[chnum].state == HC_DATATGLERR))
     {
-      hhcd->hc[ch_num].ErrCnt++;
-      if (hhcd->hc[ch_num].ErrCnt > 2U)
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].ErrCnt++;
+      if (hhcd->hc[chnum].ErrCnt > 2U)
       {
-        hhcd->hc[ch_num].ErrCnt = 0U;
-        hhcd->hc[ch_num].urb_state = URB_ERROR;
+        hhcd->hc[chnum].ErrCnt = 0U;
+        hhcd->hc[chnum].urb_state = URB_ERROR;
       }
       else
       {
-        hhcd->hc[ch_num].urb_state = URB_NOTREADY;
+        hhcd->hc[chnum].urb_state = URB_NOTREADY;
 
-        /* re-activate the channel */
-        tmpreg = USBx_HC(ch_num)->HCCHAR;
-        tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
-        tmpreg |= USB_OTG_HCCHAR_CHENA;
-        USBx_HC(ch_num)->HCCHAR = tmpreg;
+        if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
+            (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+        {
+          /* re-activate the channel */
+          tmpreg = USBx_HC(chnum)->HCCHAR;
+          tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+          tmpreg |= USB_OTG_HCCHAR_CHENA;
+          USBx_HC(chnum)->HCCHAR = tmpreg;
+        }
       }
     }
-    else if (hhcd->hc[ch_num].state == HC_NAK)
+    else if (hhcd->hc[chnum].state == HC_NYET)
     {
-      hhcd->hc[ch_num].urb_state  = URB_NOTREADY;
-
-      /* re-activate the channel */
-      tmpreg = USBx_HC(ch_num)->HCCHAR;
-      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
-      tmpreg |= USB_OTG_HCCHAR_CHENA;
-      USBx_HC(ch_num)->HCCHAR = tmpreg;
+      hhcd->hc[chnum].state = HC_HALTED;
     }
-    else if (hhcd->hc[ch_num].state == HC_BBLERR)
+    else if (hhcd->hc[chnum].state == HC_ACK)
     {
-      hhcd->hc[ch_num].ErrCnt++;
-      hhcd->hc[ch_num].urb_state = URB_ERROR;
+      hhcd->hc[chnum].state = HC_HALTED;
+    }
+    else if (hhcd->hc[chnum].state == HC_NAK)
+    {
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].urb_state = URB_NOTREADY;
+
+      if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
+          (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+      {
+        /* re-activate the channel */
+        tmpreg = USBx_HC(chnum)->HCCHAR;
+        tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+        tmpreg |= USB_OTG_HCCHAR_CHENA;
+        USBx_HC(chnum)->HCCHAR = tmpreg;
+      }
+    }
+    else if (hhcd->hc[chnum].state == HC_BBLERR)
+    {
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].ErrCnt++;
+      hhcd->hc[chnum].urb_state = URB_ERROR;
     }
     else
     {
-      /* ... */
+      if (hhcd->hc[chnum].state == HC_HALTED)
+      {
+        return;
+      }
     }
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH);
 
 #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
-    hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
+    hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state);
 #else
-    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
+    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
 #endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NYET))
   {
-    if (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR)
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
+    hhcd->hc[chnum].state = HC_NYET;
+    hhcd->hc[chnum].ErrCnt = 0U;
+
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
+  }
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NAK))
+  {
+    if (hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
     {
-      hhcd->hc[ch_num].ErrCnt = 0U;
-      (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+      hhcd->hc[chnum].ErrCnt = 0U;
+      hhcd->hc[chnum].state = HC_NAK;
+      (void)USB_HC_Halt(hhcd->Instance, chnum);
     }
-    else if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) ||
-             (hhcd->hc[ch_num].ep_type == EP_TYPE_BULK))
+    else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
+             (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
     {
-      hhcd->hc[ch_num].ErrCnt = 0U;
-      hhcd->hc[ch_num].state = HC_NAK;
-      (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+      hhcd->hc[chnum].ErrCnt = 0U;
+      hhcd->hc[chnum].state = HC_NAK;
+      (void)USB_HC_Halt(hhcd->Instance, chnum);
     }
     else
     {
       /* ... */
     }
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
+
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
   }
   else
   {
@@ -1353,152 +1419,135 @@
 {
   USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
   uint32_t USBx_BASE = (uint32_t)USBx;
-  uint32_t ch_num = (uint32_t)chnum;
   uint32_t tmpreg;
   uint32_t num_packets;
 
-  if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR)
+  if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_AHBERR))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_AHBERR);
-    hhcd->hc[ch_num].state = HC_XACTERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+    hhcd->hc[chnum].state = HC_XACTERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_ACK) == USB_OTG_HCINT_ACK)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_ACK))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_ACK);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+  }
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_FRMOR))
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
+  }
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_XFRC))
+  {
+    hhcd->hc[chnum].ErrCnt = 0U;
 
-    if (hhcd->hc[ch_num].do_ping == 1U)
-    {
-      hhcd->hc[ch_num].do_ping = 0U;
-      hhcd->hc[ch_num].urb_state = URB_NOTREADY;
-      (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-    }
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+    hhcd->hc[chnum].state = HC_XFRC;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_STALL))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR);
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+    hhcd->hc[chnum].state = HC_STALL;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NAK))
   {
-    hhcd->hc[ch_num].ErrCnt = 0U;
+    hhcd->hc[chnum].ErrCnt = 0U;
+    hhcd->hc[chnum].state = HC_NAK;
 
-    /* transaction completed with NYET state, update do ping state */
-    if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
-    {
-      hhcd->hc[ch_num].do_ping = 1U;
-      __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
-    }
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC);
-    hhcd->hc[ch_num].state = HC_XFRC;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_TXERR))
   {
-    hhcd->hc[ch_num].state = HC_NYET;
-    hhcd->hc[ch_num].do_ping = 1U;
-    hhcd->hc[ch_num].ErrCnt = 0U;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
+    hhcd->hc[chnum].state = HC_XACTERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_DTERR))
   {
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL);
-    hhcd->hc[ch_num].state = HC_STALL;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+    hhcd->hc[chnum].state = HC_DATATGLERR;
+    (void)USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
   }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK)
+  else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_CHH))
   {
-    hhcd->hc[ch_num].ErrCnt = 0U;
-    hhcd->hc[ch_num].state = HC_NAK;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
 
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
-  }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
-  {
-    hhcd->hc[ch_num].state = HC_XACTERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
-  }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR)
-  {
-    hhcd->hc[ch_num].state = HC_DATATGLERR;
-    (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR);
-  }
-  else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH)
-  {
-    if (hhcd->hc[ch_num].state == HC_XFRC)
+    if (hhcd->hc[chnum].state == HC_XFRC)
     {
-      hhcd->hc[ch_num].urb_state  = URB_DONE;
-      if ((hhcd->hc[ch_num].ep_type == EP_TYPE_BULK) ||
-          (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR))
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].urb_state = URB_DONE;
+
+      if ((hhcd->hc[chnum].ep_type == EP_TYPE_BULK) ||
+          (hhcd->hc[chnum].ep_type == EP_TYPE_INTR))
       {
         if (hhcd->Init.dma_enable == 0U)
         {
-          hhcd->hc[ch_num].toggle_out ^= 1U;
+          hhcd->hc[chnum].toggle_out ^= 1U;
         }
 
-        if ((hhcd->Init.dma_enable == 1U) && (hhcd->hc[ch_num].xfer_len > 0U))
+        if ((hhcd->Init.dma_enable == 1U) && (hhcd->hc[chnum].xfer_len > 0U))
         {
-          num_packets = (hhcd->hc[ch_num].xfer_len + hhcd->hc[ch_num].max_packet - 1U) / hhcd->hc[ch_num].max_packet;
+          num_packets = (hhcd->hc[chnum].xfer_len + hhcd->hc[chnum].max_packet - 1U) / hhcd->hc[chnum].max_packet;
 
           if ((num_packets & 1U) != 0U)
           {
-            hhcd->hc[ch_num].toggle_out ^= 1U;
+            hhcd->hc[chnum].toggle_out ^= 1U;
           }
         }
       }
     }
-    else if (hhcd->hc[ch_num].state == HC_NAK)
+    else if (hhcd->hc[chnum].state == HC_ACK)
     {
-      hhcd->hc[ch_num].urb_state = URB_NOTREADY;
+      hhcd->hc[chnum].state = HC_HALTED;
     }
-    else if (hhcd->hc[ch_num].state == HC_NYET)
+    else if (hhcd->hc[chnum].state == HC_NAK)
     {
-      hhcd->hc[ch_num].urb_state  = URB_NOTREADY;
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].urb_state = URB_NOTREADY;
     }
-    else if (hhcd->hc[ch_num].state == HC_STALL)
+    else if (hhcd->hc[chnum].state == HC_STALL)
     {
-      hhcd->hc[ch_num].urb_state  = URB_STALL;
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].urb_state  = URB_STALL;
     }
-    else if ((hhcd->hc[ch_num].state == HC_XACTERR) ||
-             (hhcd->hc[ch_num].state == HC_DATATGLERR))
+    else if ((hhcd->hc[chnum].state == HC_XACTERR) ||
+             (hhcd->hc[chnum].state == HC_DATATGLERR))
     {
-      hhcd->hc[ch_num].ErrCnt++;
-      if (hhcd->hc[ch_num].ErrCnt > 2U)
+      hhcd->hc[chnum].state = HC_HALTED;
+      hhcd->hc[chnum].ErrCnt++;
+      if (hhcd->hc[chnum].ErrCnt > 2U)
       {
-        hhcd->hc[ch_num].ErrCnt = 0U;
-        hhcd->hc[ch_num].urb_state = URB_ERROR;
+        hhcd->hc[chnum].ErrCnt = 0U;
+        hhcd->hc[chnum].urb_state = URB_ERROR;
       }
       else
       {
-        hhcd->hc[ch_num].urb_state = URB_NOTREADY;
+        hhcd->hc[chnum].urb_state = URB_NOTREADY;
 
         /* re-activate the channel  */
-        tmpreg = USBx_HC(ch_num)->HCCHAR;
+        tmpreg = USBx_HC(chnum)->HCCHAR;
         tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
         tmpreg |= USB_OTG_HCCHAR_CHENA;
-        USBx_HC(ch_num)->HCCHAR = tmpreg;
+        USBx_HC(chnum)->HCCHAR = tmpreg;
       }
     }
     else
     {
-      /* ... */
+      return;
     }
 
-    __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH);
-
 #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
-    hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
+    hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state);
 #else
-    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
+    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
 #endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
   }
   else
   {
-    /* ... */
+    return;
   }
 }
 
@@ -1516,10 +1565,10 @@
   uint32_t GrxstspReg;
   uint32_t xferSizePktCnt;
   uint32_t tmpreg;
-  uint32_t ch_num;
+  uint32_t chnum;
 
   GrxstspReg = hhcd->Instance->GRXSTSP;
-  ch_num = GrxstspReg & USB_OTG_GRXSTSP_EPNUM;
+  chnum = GrxstspReg & USB_OTG_GRXSTSP_EPNUM;
   pktsts = (GrxstspReg & USB_OTG_GRXSTSP_PKTSTS) >> 17;
   pktcnt = (GrxstspReg & USB_OTG_GRXSTSP_BCNT) >> 4;
 
@@ -1527,33 +1576,33 @@
   {
     case GRXSTS_PKTSTS_IN:
       /* Read the data into the host buffer. */
-      if ((pktcnt > 0U) && (hhcd->hc[ch_num].xfer_buff != (void *)0))
+      if ((pktcnt > 0U) && (hhcd->hc[chnum].xfer_buff != (void *)0))
       {
-        if ((hhcd->hc[ch_num].xfer_count + pktcnt) <= hhcd->hc[ch_num].xfer_len)
+        if ((hhcd->hc[chnum].xfer_count + pktcnt) <= hhcd->hc[chnum].xfer_len)
         {
           (void)USB_ReadPacket(hhcd->Instance,
-                               hhcd->hc[ch_num].xfer_buff, (uint16_t)pktcnt);
+                               hhcd->hc[chnum].xfer_buff, (uint16_t)pktcnt);
 
           /* manage multiple Xfer */
-          hhcd->hc[ch_num].xfer_buff += pktcnt;
-          hhcd->hc[ch_num].xfer_count += pktcnt;
+          hhcd->hc[chnum].xfer_buff += pktcnt;
+          hhcd->hc[chnum].xfer_count += pktcnt;
 
           /* get transfer size packet count */
-          xferSizePktCnt = (USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19;
+          xferSizePktCnt = (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19;
 
-          if ((hhcd->hc[ch_num].max_packet == pktcnt) && (xferSizePktCnt > 0U))
+          if ((hhcd->hc[chnum].max_packet == pktcnt) && (xferSizePktCnt > 0U))
           {
             /* re-activate the channel when more packets are expected */
-            tmpreg = USBx_HC(ch_num)->HCCHAR;
+            tmpreg = USBx_HC(chnum)->HCCHAR;
             tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
             tmpreg |= USB_OTG_HCCHAR_CHENA;
-            USBx_HC(ch_num)->HCCHAR = tmpreg;
-            hhcd->hc[ch_num].toggle_in ^= 1U;
+            USBx_HC(chnum)->HCCHAR = tmpreg;
+            hhcd->hc[chnum].toggle_in ^= 1U;
           }
         }
         else
         {
-          hhcd->hc[ch_num].urb_state = URB_ERROR;
+          hhcd->hc[chnum].urb_state = URB_ERROR;
         }
       }
       break;
@@ -1608,7 +1657,7 @@
 
     if ((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
     {
-      if (hhcd->Init.phy_itface  == USB_OTG_EMBEDDED_PHY)
+      if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
       {
         if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17))
         {
@@ -1623,7 +1672,7 @@
       {
         if (hhcd->Init.speed == HCD_SPEED_FULL)
         {
-          USBx_HOST->HFIR = 60000U;
+          USBx_HOST->HFIR = HFIR_60_MHZ;
         }
       }
 #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
diff --git a/Src/stm32l4xx_hal_i2c.c b/Src/stm32l4xx_hal_i2c.c
index 3ea8cc0..30bea1e 100644
--- a/Src/stm32l4xx_hal_i2c.c
+++ b/Src/stm32l4xx_hal_i2c.c
@@ -400,9 +400,15 @@
   * @}
   */
 
-/* Private macro -------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup I2C_Private_Macro
+  * @{
+  */
 /* Macro to get remaining data to transfer on DMA side */
 #define I2C_GET_DMA_REMAIN_DATA(__HANDLE__)     __HAL_DMA_GET_COUNTER(__HANDLE__)
+/**
+  * @}
+  */
 
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -418,6 +424,7 @@
 static void I2C_DMAError(DMA_HandleTypeDef *hdma);
 static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
 
+
 /* Private functions to handle IT transfer */
 static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
 static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c);
@@ -601,7 +608,12 @@
   /* Configure I2Cx: Addressing Master mode */
   if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
   {
-    hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+    SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10);
+  }
+  else
+  {
+    /* Clear the I2C ADD10 bit */
+    CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10);
   }
   /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
   hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
@@ -711,6 +723,8 @@
 /**
   * @brief  Register a User I2C Callback
   *         To be used instead of the weak predefined callback
+  * @note   The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET
+  *         to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID.
   * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
   *                the configuration information for the specified I2C.
   * @param  CallbackID ID of the callback to be registered
@@ -741,8 +755,6 @@
 
     return HAL_ERROR;
   }
-  /* Process locked */
-  __HAL_LOCK(hi2c);
 
   if (HAL_I2C_STATE_READY == hi2c->State)
   {
@@ -831,14 +843,14 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hi2c);
   return status;
 }
 
 /**
   * @brief  Unregister an I2C Callback
   *         I2C callback is redirected to the weak predefined callback
+  * @note   The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET
+  *         to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID.
   * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
   *                the configuration information for the specified I2C.
   * @param  CallbackID ID of the callback to be unregistered
@@ -861,9 +873,6 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hi2c);
-
   if (HAL_I2C_STATE_READY == hi2c->State)
   {
     switch (CallbackID)
@@ -951,8 +960,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hi2c);
   return status;
 }
 
@@ -975,8 +982,6 @@
 
     return HAL_ERROR;
   }
-  /* Process locked */
-  __HAL_LOCK(hi2c);
 
   if (HAL_I2C_STATE_READY == hi2c->State)
   {
@@ -991,8 +996,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hi2c);
   return status;
 }
 
@@ -1007,9 +1010,6 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hi2c);
-
   if (HAL_I2C_STATE_READY == hi2c->State)
   {
     hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback  */
@@ -1023,8 +1023,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hi2c);
   return status;
 }
 
@@ -1415,6 +1413,19 @@
       return HAL_ERROR;
     }
 
+    /* Preload TX data if no stretch enable */
+    if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE)
+    {
+      /* Preload TX register */
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+    }
+
     /* Clear ADDR flag */
     __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
 
@@ -1830,6 +1841,20 @@
     hi2c->XferOptions = I2C_NO_OPTION_FRAME;
     hi2c->XferISR     = I2C_Slave_ISR_IT;
 
+    /* Preload TX data if no stretch enable */
+    if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE)
+    {
+      /* Preload TX register */
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+      hi2c->XferSize--;
+    }
+
     /* Process Unlocked */
     __HAL_UNLOCK(hi2c);
 
@@ -1978,8 +2003,8 @@
         hi2c->hdmatx->XferAbortCallback = NULL;
 
         /* Enable the DMA channel */
-        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR,
-                                         hi2c->XferSize);
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr,
+                                         (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
       }
       else
       {
@@ -2000,7 +2025,8 @@
       {
         /* Send Slave Address */
         /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
-        I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, I2C_GENERATE_START_WRITE);
+        I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U),
+                           xfermode, I2C_GENERATE_START_WRITE);
 
         /* Update XferCount value */
         hi2c->XferCount -= hi2c->XferSize;
@@ -2195,11 +2221,11 @@
       /* Note : The I2C interrupts must be enabled after unlocking current process
                 to avoid the risk of I2C interrupt handle execution before current
                 process unlock */
-      /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+      /* Enable ERR, TC, STOP, NACK, RXI interrupt */
       /* possible to enable all of these */
       /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
         I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
-      I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+      I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
     }
 
     return HAL_OK;
@@ -2243,39 +2269,88 @@
     hi2c->XferOptions = I2C_NO_OPTION_FRAME;
     hi2c->XferISR     = I2C_Slave_ISR_DMA;
 
-    if (hi2c->hdmatx != NULL)
+    /* Preload TX data if no stretch enable */
+    if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE)
     {
-      /* Set the I2C DMA transfer complete callback */
-      hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+      /* Preload TX register */
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
 
-      /* Set the DMA error callback */
-      hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
 
-      /* Set the unused DMA callbacks to NULL */
-      hi2c->hdmatx->XferHalfCpltCallback = NULL;
-      hi2c->hdmatx->XferAbortCallback = NULL;
+      hi2c->XferCount--;
+      hi2c->XferSize--;
+    }
 
-      /* Enable the DMA channel */
-      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR,
-                                       hi2c->XferSize);
+    if (hi2c->XferCount != 0U)
+    {
+      if (hi2c->hdmatx != NULL)
+      {
+        /* Set the I2C DMA transfer complete callback */
+        hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+        /* Set the DMA error callback */
+        hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+        /* Set the unused DMA callbacks to NULL */
+        hi2c->hdmatx->XferHalfCpltCallback = NULL;
+        hi2c->hdmatx->XferAbortCallback = NULL;
+
+        /* Enable the DMA channel */
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx,
+                                         (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR,
+                                         hi2c->XferSize);
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_LISTEN;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+
+      if (dmaxferstatus == HAL_OK)
+      {
+        /* Enable Address Acknowledge */
+        hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        /* Note : The I2C interrupts must be enabled after unlocking current process
+                  to avoid the risk of I2C interrupt handle execution before current
+                  process unlock */
+        /* Enable ERR, STOP, NACK, ADDR interrupts */
+        I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_LISTEN;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
     }
     else
     {
-      /* Update I2C state */
-      hi2c->State     = HAL_I2C_STATE_LISTEN;
-      hi2c->Mode      = HAL_I2C_MODE_NONE;
-
-      /* Update I2C error code */
-      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
-
-      /* Process Unlocked */
-      __HAL_UNLOCK(hi2c);
-
-      return HAL_ERROR;
-    }
-
-    if (dmaxferstatus == HAL_OK)
-    {
       /* Enable Address Acknowledge */
       hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
 
@@ -2283,27 +2358,10 @@
       __HAL_UNLOCK(hi2c);
 
       /* Note : The I2C interrupts must be enabled after unlocking current process
-                to avoid the risk of I2C interrupt handle execution before current
-                process unlock */
+      to avoid the risk of I2C interrupt handle execution before current
+      process unlock */
       /* Enable ERR, STOP, NACK, ADDR interrupts */
       I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
-
-      /* Enable DMA Request */
-      hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
-    }
-    else
-    {
-      /* Update I2C state */
-      hi2c->State     = HAL_I2C_STATE_LISTEN;
-      hi2c->Mode      = HAL_I2C_MODE_NONE;
-
-      /* Update I2C error code */
-      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
-
-      /* Process Unlocked */
-      __HAL_UNLOCK(hi2c);
-
-      return HAL_ERROR;
     }
 
     return HAL_OK;
@@ -2417,6 +2475,7 @@
     return HAL_BUSY;
   }
 }
+
 /**
   * @brief  Write an amount of data in blocking mode to a specific memory address
   * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
@@ -2731,6 +2790,7 @@
     hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
 
     /* Prepare transfer parameters */
+    hi2c->XferSize    = 0U;
     hi2c->pBuffPtr    = pData;
     hi2c->XferCount   = Size;
     hi2c->XferOptions = I2C_NO_OPTION_FRAME;
@@ -2852,11 +2912,11 @@
               to avoid the risk of I2C interrupt handle execution before current
               process unlock */
 
-    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
     /* possible to enable all of these */
     /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
       I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
-    I2C_Enable_IRQ(hi2c, (I2C_XFER_TX_IT | I2C_XFER_RX_IT));
+    I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
 
     return HAL_OK;
   }
@@ -2865,6 +2925,7 @@
     return HAL_BUSY;
   }
 }
+
 /**
   * @brief  Write an amount of data in non-blocking mode with DMA to a specific memory address
   * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
@@ -3347,7 +3408,8 @@
       xfermode = hi2c->XferOptions;
     }
 
-    if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)))
+    if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \
+                                  (XferOptions == I2C_FIRST_AND_LAST_FRAME)))
     {
       /* Preload TX register */
       /* Write data to TXDR */
@@ -3461,7 +3523,8 @@
       xfermode = hi2c->XferOptions;
     }
 
-    if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)))
+    if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \
+                                  (XferOptions == I2C_FIRST_AND_LAST_FRAME)))
     {
       /* Preload TX register */
       /* Write data to TXDR */
@@ -3510,8 +3573,8 @@
         hi2c->hdmatx->XferAbortCallback = NULL;
 
         /* Enable the DMA channel */
-        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR,
-                                         hi2c->XferSize);
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr,
+                                         (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
       }
       else
       {
@@ -3847,11 +3910,11 @@
       /* Note : The I2C interrupts must be enabled after unlocking current process
                 to avoid the risk of I2C interrupt handle execution before current
                 process unlock */
-      /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+      /* Enable ERR, TC, STOP, NACK, RXI interrupt */
       /* possible to enable all of these */
       /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
         I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
-      I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+      I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
     }
 
     return HAL_OK;
@@ -3876,7 +3939,7 @@
                                                 uint32_t XferOptions)
 {
   /* Declaration of tmp to prevent undefined behavior of volatile usage */
-  uint32_t tmp;
+  FlagStatus tmp;
 
   /* Check the parameters */
   assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -3938,7 +4001,7 @@
     hi2c->XferISR     = I2C_Slave_ISR_IT;
 
     tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
-    if ((tmp != RESET) && (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE))
+    if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET))
     {
       /* Clear ADDR flag after prepare the transfer parameters */
       /* This action will generate an acknowledge to the Master */
@@ -3976,8 +4039,7 @@
                                                  uint32_t XferOptions)
 {
   /* Declaration of tmp to prevent undefined behavior of volatile usage */
-  uint32_t tmp;
-
+  FlagStatus tmp;
   HAL_StatusTypeDef dmaxferstatus;
 
   /* Check the parameters */
@@ -4012,7 +4074,7 @@
           hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
 
           /* Set the I2C DMA Abort callback :
-           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
           hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
 
           /* Abort DMA RX */
@@ -4034,7 +4096,7 @@
         if (hi2c->hdmatx != NULL)
         {
           /* Set the I2C DMA Abort callback :
-           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
           hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
 
           /* Abort DMA TX */
@@ -4120,7 +4182,7 @@
     }
 
     tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
-    if ((tmp != RESET) && (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE))
+    if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET))
     {
       /* Clear ADDR flag after prepare the transfer parameters */
       /* This action will generate an acknowledge to the Master */
@@ -4161,7 +4223,7 @@
                                                uint32_t XferOptions)
 {
   /* Declaration of tmp to prevent undefined behavior of volatile usage */
-  uint32_t tmp;
+  FlagStatus tmp;
 
   /* Check the parameters */
   assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -4223,7 +4285,7 @@
     hi2c->XferISR     = I2C_Slave_ISR_IT;
 
     tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
-    if ((tmp != RESET) && (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT))
+    if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET))
     {
       /* Clear ADDR flag after prepare the transfer parameters */
       /* This action will generate an acknowledge to the Master */
@@ -4261,7 +4323,7 @@
                                                 uint32_t XferOptions)
 {
   /* Declaration of tmp to prevent undefined behavior of volatile usage */
-  uint32_t tmp;
+  FlagStatus tmp;
   HAL_StatusTypeDef dmaxferstatus;
 
   /* Check the parameters */
@@ -4404,7 +4466,7 @@
     }
 
     tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
-    if ((tmp != RESET) && (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT))
+    if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET))
     {
       /* Clear ADDR flag after prepare the transfer parameters */
       /* This action will generate an acknowledge to the Master */
@@ -4556,7 +4618,7 @@
   *                the configuration information for the specified I2C.
   * @retval None
   */
-void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */
 {
   /* Get current IT Flags and IT sources value */
   uint32_t itflags   = READ_REG(hi2c->Instance->ISR);
@@ -5009,7 +5071,7 @@
   * @retval HAL status
   */
 static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
-                                           uint32_t ITSources)
+                                        uint32_t ITSources)
 {
   uint32_t direction = I2C_GENERATE_START_WRITE;
   uint32_t tmpITFlags = ITFlags;
@@ -5097,6 +5159,12 @@
   else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \
            (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
   {
+    /* Disable Interrupt related to address step */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
     if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
     {
       direction = I2C_GENERATE_START_READ;
@@ -5427,7 +5495,7 @@
   * @retval HAL status
   */
 static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
-                                            uint32_t ITSources)
+                                         uint32_t ITSources)
 {
   uint32_t direction = I2C_GENERATE_START_WRITE;
 
@@ -5463,6 +5531,9 @@
   else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \
            (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
   {
+    /* Disable Interrupt related to address step */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
     /* Enable only Error interrupt */
     I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
 
@@ -5505,6 +5576,12 @@
   else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \
            (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
   {
+    /* Disable Interrupt related to address step */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    /* Enable only Error and NACK interrupt for data transfer */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
     if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
     {
       direction = I2C_GENERATE_START_READ;
@@ -6199,6 +6276,11 @@
     I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
     hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
   }
+  else if (tmpstate == HAL_I2C_STATE_LISTEN)
+  {
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+    hi2c->PreviousState = I2C_STATE_NONE;
+  }
   else
   {
     /* Do nothing */
@@ -6392,6 +6474,7 @@
 static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
 {
   HAL_I2C_StateTypeDef tmpstate = hi2c->State;
+
   uint32_t tmppreviousstate;
 
   /* Reset handle parameters */
@@ -6419,18 +6502,36 @@
     /* Disable all interrupts */
     I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
 
+    /* Flush TX register */
+    I2C_Flush_TXDR(hi2c);
+
     /* If state is an abort treatment on going, don't change state */
     /* This change will be do later */
     if (hi2c->State != HAL_I2C_STATE_ABORT)
     {
       /* Set HAL_I2C_STATE_READY */
       hi2c->State         = HAL_I2C_STATE_READY;
+
+      /* Check if a STOPF is detected */
+      if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+      {
+        if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+        {
+          __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+          hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+        }
+
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      }
+
     }
     hi2c->XferISR       = NULL;
   }
 
   /* Abort DMA TX transfer if any */
   tmppreviousstate = hi2c->PreviousState;
+
   if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \
                                  (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX)))
   {
@@ -6605,6 +6706,7 @@
   }
 }
 
+
 /**
   * @brief  DMA I2C slave transmit process complete callback.
   * @param  hdma DMA handle
@@ -6633,6 +6735,7 @@
   }
 }
 
+
 /**
   * @brief DMA I2C master receive process complete callback.
   * @param  hdma DMA handle
@@ -6683,6 +6786,7 @@
   }
 }
 
+
 /**
   * @brief  DMA I2C slave receive process complete callback.
   * @param  hdma DMA handle
@@ -6711,6 +6815,7 @@
   }
 }
 
+
 /**
   * @brief  DMA I2C communication error callback.
   * @param hdma DMA handle
@@ -6728,6 +6833,7 @@
   I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
 }
 
+
 /**
   * @brief DMA I2C communication abort callback
   *        (To be called at end of DMA Abort procedure).
@@ -6752,6 +6858,7 @@
   I2C_TreatErrorCallback(hi2c);
 }
 
+
 /**
   * @brief  This function handles I2C Communication Timeout. It waits
   *                until a flag is no longer in the specified status.
@@ -6995,7 +7102,7 @@
             /* Check for the Timeout */
             if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF)
             {
-              error_code |=HAL_I2C_ERROR_TIMEOUT;
+              error_code |= HAL_I2C_ERROR_TIMEOUT;
 
               status = HAL_ERROR;
 
@@ -7124,8 +7231,9 @@
 {
   uint32_t tmpisr = 0U;
 
-  if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
-      (hi2c->XferISR == I2C_Slave_ISR_DMA))
+  if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \
+      (hi2c->XferISR != I2C_Slave_ISR_DMA) && \
+      (hi2c->XferISR != I2C_Mem_ISR_DMA))
   {
     if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
     {
@@ -7133,6 +7241,51 @@
       tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
     }
 
+    if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+    {
+      /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+    }
+
+    if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+    {
+      /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+    }
+
+    if (InterruptRequest == I2C_XFER_ERROR_IT)
+    {
+      /* Enable ERR and NACK interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+    }
+
+    if (InterruptRequest == I2C_XFER_CPLT_IT)
+    {
+      /* Enable STOP interrupts */
+      tmpisr |= I2C_IT_STOPI;
+    }
+  }
+
+  else
+  {
+    if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+    {
+      /* Enable ERR, STOP, NACK and ADDR interrupts */
+      tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+    }
+
+    if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+    {
+      /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+    }
+
+    if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+    {
+      /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+    }
+
     if (InterruptRequest == I2C_XFER_ERROR_IT)
     {
       /* Enable ERR and NACK interrupts */
@@ -7151,38 +7304,6 @@
       tmpisr |= I2C_IT_TCI;
     }
   }
-  else
-  {
-    if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
-    {
-      /* Enable ERR, STOP, NACK, and ADDR interrupts */
-      tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
-    }
-
-    if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
-    {
-      /* Enable ERR, TC, STOP, NACK and RXI interrupts */
-      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
-    }
-
-    if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
-    {
-      /* Enable ERR, TC, STOP, NACK and TXI interrupts */
-      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
-    }
-
-    if (InterruptRequest == I2C_XFER_ERROR_IT)
-    {
-      /* Enable ERR and NACK interrupts */
-      tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
-    }
-
-    if (InterruptRequest == I2C_XFER_CPLT_IT)
-    {
-      /* Enable STOP interrupts */
-      tmpisr |= I2C_IT_STOPI;
-    }
-  }
 
   /* Enable interrupts only at the end */
   /* to avoid the risk of I2C interrupt handle execution before */
diff --git a/Src/stm32l4xx_hal_irda.c b/Src/stm32l4xx_hal_irda.c
index c39059d..1f70790 100644
--- a/Src/stm32l4xx_hal_irda.c
+++ b/Src/stm32l4xx_hal_irda.c
@@ -142,7 +142,7 @@
 
     [..]
     Use function HAL_IRDA_UnRegisterCallback() to reset a callback to the default
-    weak (surcharged) function.
+    weak function.
     HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle,
     and the Callback ID.
     This function allows to reset following callbacks:
@@ -159,10 +159,10 @@
 
     [..]
     By default, after the HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET
-    all callbacks are set to the corresponding weak (surcharged) functions:
+    all callbacks are set to the corresponding weak functions:
     examples HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxHalfCpltCallback().
     Exception done for MspInit and MspDeInit functions that are respectively
-    reset to the legacy weak (surcharged) functions in the HAL_IRDA_Init()
+    reset to the legacy weak functions in the HAL_IRDA_Init()
     and HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand).
     If not, MspInit or MspDeInit are not null, the HAL_IRDA_Init() and HAL_IRDA_DeInit()
     keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
@@ -179,7 +179,7 @@
     [..]
     When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or
     not defined, the callback registration feature is not available
-    and weak (surcharged) callbacks are used.
+    and weak callbacks are used.
 
   @endverbatim
   ******************************************************************************
@@ -471,7 +471,7 @@
 #if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User IRDA Callback
-  *         To be used instead of the weak predefined callback
+  *         To be used to override the weak predefined callback
   * @note   The HAL_IRDA_RegisterCallback() may be called before HAL_IRDA_Init() in HAL_IRDA_STATE_RESET
   *         to register callbacks for HAL_IRDA_MSPINIT_CB_ID and HAL_IRDA_MSPDEINIT_CB_ID
   * @param  hirda irda handle
@@ -2530,7 +2530,6 @@
   hirda->gState = HAL_IRDA_STATE_READY;
 }
 
-
 /**
   * @brief  End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
   * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
diff --git a/Src/stm32l4xx_hal_lptim.c b/Src/stm32l4xx_hal_lptim.c
index b461fc8..00a41fc 100644
--- a/Src/stm32l4xx_hal_lptim.c
+++ b/Src/stm32l4xx_hal_lptim.c
@@ -206,7 +206,7 @@
 #if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
 static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim);
 #endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
-static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag);
+static HAL_StatusTypeDef LPTIM_WaitForFlag(const LPTIM_HandleTypeDef *hlptim, uint32_t flag);
 
 /* Exported functions --------------------------------------------------------*/
 
@@ -2473,7 +2473,7 @@
   * @param  hlptim LPTIM handle
   * @retval HAL state
   */
-HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim)
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(const LPTIM_HandleTypeDef *hlptim)
 {
   /* Return LPTIM handle state */
   return hlptim->State;
@@ -2524,7 +2524,7 @@
   * @param  flag   The lptim flag
   * @retval HAL status
   */
-static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag)
+static HAL_StatusTypeDef LPTIM_WaitForFlag(const LPTIM_HandleTypeDef *hlptim, uint32_t flag)
 {
   HAL_StatusTypeDef result = HAL_OK;
   uint32_t count = TIMEOUT * (SystemCoreClock / 20UL / 1000UL);
diff --git a/Src/stm32l4xx_hal_ltdc.c b/Src/stm32l4xx_hal_ltdc.c
index e8f8fd6..331854b 100644
--- a/Src/stm32l4xx_hal_ltdc.c
+++ b/Src/stm32l4xx_hal_ltdc.c
@@ -178,7 +178,13 @@
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Define LTDC Private Define
+  * @{
+  */
 #define LTDC_TIMEOUT_VALUE ((uint32_t)100U)  /* 100ms */
+/**
+  * @}
+  */
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -549,7 +555,7 @@
         break;
 
       case HAL_LTDC_MSPINIT_CB_ID :
-        hltdc->MspInitCallback = HAL_LTDC_MspInit;                  /* Legcay weak MspInit Callback     */
+        hltdc->MspInitCallback = HAL_LTDC_MspInit;                  /* Legcay weak MspInit Callback  */
         break;
 
       case HAL_LTDC_MSPDEINIT_CB_ID :
diff --git a/Src/stm32l4xx_hal_ltdc_ex.c b/Src/stm32l4xx_hal_ltdc_ex.c
index 01bbb5e..3d0e586 100644
--- a/Src/stm32l4xx_hal_ltdc_ex.c
+++ b/Src/stm32l4xx_hal_ltdc_ex.c
@@ -74,16 +74,18 @@
   /* The following polarity is inverted:
                      LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH */
 
+#if !defined(POLARITIES_INVERSION_UPDATED)
   /* Note 1 : Code in line w/ Current LTDC specification */
   hltdc->Init.DEPolarity = (VidCfg->DEPolarity == \
                             DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
   hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AH : LTDC_VSPOLARITY_AL;
   hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AH : LTDC_HSPOLARITY_AL;
-
+#else
   /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
-  /* hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29;
-     hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29;
-     hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; */
+  hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29;
+  hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29;
+  hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29;
+#endif /* POLARITIES_INVERSION_UPDATED */
 
   /* Retrieve vertical timing parameters from DSI */
   hltdc->Init.VerticalSync       = VidCfg->VerticalSyncActive - 1U;
@@ -115,17 +117,18 @@
                      LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
                      LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
 
+#if !defined(POLARITIES_INVERSION_UPDATED)
   /* Note 1 : Code in line w/ Current LTDC specification */
   hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == \
                             DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
   hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
   hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
-
+#else
   /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
-  /* hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29;
-     hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29;
-     hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; */
-
+  hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29;
+  hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29;
+  hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29;
+#endif /* POLARITIES_INVERSION_UPDATED */
   return HAL_OK;
 }
 
diff --git a/Src/stm32l4xx_hal_mmc.c b/Src/stm32l4xx_hal_mmc.c
index 1ec7606..b977ac3 100644
--- a/Src/stm32l4xx_hal_mmc.c
+++ b/Src/stm32l4xx_hal_mmc.c
@@ -4537,6 +4537,8 @@
       supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_52_INDEX/4)] >> MMC_EXT_CSD_PWR_CL_52_POS) & 0x000000FFU);
     }
     else
+#else /* Prevent compiler warning in case of -Wextra */
+    UNUSED(Speed);
 #endif
     {
       /* Field PWR_CL_26_xxx [201 or 203] */
diff --git a/Src/stm32l4xx_hal_nand.c b/Src/stm32l4xx_hal_nand.c
index 05ad32b..d5e378d 100644
--- a/Src/stm32l4xx_hal_nand.c
+++ b/Src/stm32l4xx_hal_nand.c
@@ -77,15 +77,15 @@
       and a pointer to the user callback function.
 
       Use function HAL_NAND_UnRegisterCallback() to reset a callback to the default
-      weak (surcharged) function. It allows to reset following callbacks:
+      weak (overridden) function. It allows to reset following callbacks:
         (+) MspInitCallback    : NAND MspInit.
         (+) MspDeInitCallback  : NAND MspDeInit.
       This function) takes as parameters the HAL peripheral handle and the Callback ID.
 
       By default, after the HAL_NAND_Init and if the state is HAL_NAND_STATE_RESET
-      all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+      all callbacks are reset to the corresponding legacy weak (overridden) functions.
       Exception done for MspInit and MspDeInit callbacks that are respectively
-      reset to the legacy weak (surcharged) functions in the HAL_NAND_Init
+      reset to the legacy weak (overridden) functions in the HAL_NAND_Init
       and  HAL_NAND_DeInit only when these callbacks are null (not registered beforehand).
       If not, MspInit or MspDeInit are not null, the HAL_NAND_Init and HAL_NAND_DeInit
       keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
@@ -100,7 +100,7 @@
 
       When The compilation define USE_HAL_NAND_REGISTER_CALLBACKS is set to 0 or
       not defined, the callback registering feature is not available
-      and weak (surcharged) callbacks are used.
+      and weak (overridden) callbacks are used.
 
   @endverbatim
   ******************************************************************************
@@ -515,8 +515,8 @@
   * @param  NumPageToRead  number of pages to read from block
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
-                                        uint32_t NumPageToRead)
+HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                        uint8_t *pBuffer, uint32_t NumPageToRead)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -673,8 +673,8 @@
   * @param  NumPageToRead  number of pages to read from block
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
-                                         uint32_t NumPageToRead)
+HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                         uint16_t *pBuffer, uint32_t NumPageToRead)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -841,8 +841,8 @@
   * @param  NumPageToWrite   number of pages to write to block
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
-                                         uint32_t NumPageToWrite)
+HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                         const uint8_t *pBuffer, uint32_t NumPageToWrite)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -850,7 +850,7 @@
   uint32_t numpageswritten = 0U;
   uint32_t nandaddress;
   uint32_t nbpages = NumPageToWrite;
-  uint8_t *buff = pBuffer;
+  const uint8_t *buff = pBuffer;
 
   /* Check the NAND controller state */
   if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -994,8 +994,8 @@
   * @param  NumPageToWrite   number of pages to write to block
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
-                                          uint32_t NumPageToWrite)
+HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                          const uint16_t *pBuffer, uint32_t NumPageToWrite)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -1003,7 +1003,7 @@
   uint32_t numpageswritten = 0U;
   uint32_t nandaddress;
   uint32_t nbpages = NumPageToWrite;
-  uint16_t *buff = pBuffer;
+  const uint16_t *buff = pBuffer;
 
   /* Check the NAND controller state */
   if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -1158,8 +1158,8 @@
   * @param  NumSpareAreaToRead Number of spare area to read
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
-                                             uint32_t NumSpareAreaToRead)
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                             uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -1323,7 +1323,7 @@
   * @param  NumSpareAreaToRead Number of spare area to read
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
                                               uint16_t *pBuffer, uint32_t NumSpareAreaToRead)
 {
   uint32_t index;
@@ -1488,8 +1488,8 @@
   * @param  NumSpareAreaTowrite   number of spare areas to write to block
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
-                                              uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                              const uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -1498,7 +1498,7 @@
   uint32_t nandaddress;
   uint32_t columnaddress;
   uint32_t nbspare = NumSpareAreaTowrite;
-  uint8_t *buff = pBuffer;
+  const uint8_t *buff = pBuffer;
 
   /* Check the NAND controller state */
   if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -1651,8 +1651,8 @@
   * @param  NumSpareAreaTowrite   number of spare areas to write to block
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
-                                               uint16_t *pBuffer, uint32_t NumSpareAreaTowrite)
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress,
+                                               const uint16_t *pBuffer, uint32_t NumSpareAreaTowrite)
 {
   uint32_t index;
   uint32_t tickstart;
@@ -1661,7 +1661,7 @@
   uint32_t nandaddress;
   uint32_t columnaddress;
   uint32_t nbspare = NumSpareAreaTowrite;
-  uint16_t *buff = pBuffer;
+  const uint16_t *buff = pBuffer;
 
   /* Check the NAND controller state */
   if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -1812,7 +1812,7 @@
   * @param  pAddress  pointer to NAND address structure
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress)
 {
   uint32_t deviceaddress;
 
@@ -1868,7 +1868,7 @@
   *           - NAND_VALID_ADDRESS: When the new address is valid address
   *           - NAND_INVALID_ADDRESS: When the new address is invalid address
   */
-uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+uint32_t HAL_NAND_Address_Inc(const NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
 {
   uint32_t status = NAND_VALID_ADDRESS;
 
@@ -1899,7 +1899,7 @@
 #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User NAND Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used to override the weak predefined callback
   * @param hnand : NAND handle
   * @param CallbackId : ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -1919,9 +1919,6 @@
     return HAL_ERROR;
   }
 
-  /* Process locked */
-  __HAL_LOCK(hnand);
-
   if (hnand->State == HAL_NAND_STATE_READY)
   {
     switch (CallbackId)
@@ -1963,14 +1960,12 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hnand);
   return status;
 }
 
 /**
   * @brief  Unregister a User NAND Callback
-  *         NAND Callback is redirected to the weak (surcharged) predefined callback
+  *         NAND Callback is redirected to the weak predefined callback
   * @param hnand : NAND handle
   * @param CallbackId : ID of the callback to be unregistered
   *        This parameter can be one of the following values:
@@ -1983,9 +1978,6 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hnand);
-
   if (hnand->State == HAL_NAND_STATE_READY)
   {
     switch (CallbackId)
@@ -2027,8 +2019,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hnand);
   return status;
 }
 #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
@@ -2179,7 +2169,7 @@
   *                the configuration information for NAND module.
   * @retval HAL state
   */
-HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
+HAL_NAND_StateTypeDef HAL_NAND_GetState(const NAND_HandleTypeDef *hnand)
 {
   return hnand->State;
 }
@@ -2190,7 +2180,7 @@
   *                the configuration information for NAND module.
   * @retval NAND status
   */
-uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
+uint32_t HAL_NAND_Read_Status(const NAND_HandleTypeDef *hnand)
 {
   uint32_t data;
   uint32_t deviceaddress;
diff --git a/Src/stm32l4xx_hal_nor.c b/Src/stm32l4xx_hal_nor.c
index 6370e8e..dc6123e 100644
--- a/Src/stm32l4xx_hal_nor.c
+++ b/Src/stm32l4xx_hal_nor.c
@@ -74,15 +74,15 @@
       and a pointer to the user callback function.
 
       Use function HAL_NOR_UnRegisterCallback() to reset a callback to the default
-      weak (surcharged) function. It allows to reset following callbacks:
+      weak (overridden) function. It allows to reset following callbacks:
         (+) MspInitCallback    : NOR MspInit.
         (+) MspDeInitCallback  : NOR MspDeInit.
       This function) takes as parameters the HAL peripheral handle and the Callback ID.
 
       By default, after the HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET
-      all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+      all callbacks are reset to the corresponding legacy weak (overridden) functions.
       Exception done for MspInit and MspDeInit callbacks that are respectively
-      reset to the legacy weak (surcharged) functions in the HAL_NOR_Init
+      reset to the legacy weak (overridden) functions in the HAL_NOR_Init
       and  HAL_NOR_DeInit only when these callbacks are null (not registered beforehand).
       If not, MspInit or MspDeInit are not null, the HAL_NOR_Init and HAL_NOR_DeInit
       keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
@@ -97,7 +97,7 @@
 
       When The compilation define USE_HAL_NOR_REGISTER_CALLBACKS is set to 0 or
       not defined, the callback registering feature is not available
-      and weak (surcharged) callbacks are used.
+      and weak (overridden) callbacks are used.
 
   @endverbatim
   ******************************************************************************
@@ -106,7 +106,7 @@
 /* Includes ------------------------------------------------------------------*/
 #include "stm32l4xx_hal.h"
 
-#if defined(FMC_BANK1)
+#if  defined(FMC_BANK1)
 
 /** @addtogroup STM32L4xx_HAL_Driver
   * @{
@@ -127,6 +127,11 @@
   */
 
 /* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST_BYTE            (uint16_t)0x0AAA
+#define NOR_CMD_ADDRESS_FIRST_CFI_BYTE        (uint16_t)0x00AA
+#define NOR_CMD_ADDRESS_SECOND_BYTE           (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_THIRD_BYTE            (uint16_t)0x0AAA
+
 #define NOR_CMD_ADDRESS_FIRST                 (uint16_t)0x0555
 #define NOR_CMD_ADDRESS_FIRST_CFI             (uint16_t)0x0055
 #define NOR_CMD_ADDRESS_SECOND                (uint16_t)0x02AA
@@ -264,7 +269,8 @@
   (void)FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
 
   /* Initialize NOR extended mode timing Interface */
-  (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+  (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming,
+                                         hnor->Init.NSBank, hnor->Init.ExtendedMode);
 
   /* Enable the NORSRAM device */
   __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
@@ -310,7 +316,16 @@
   else
   {
     /* Get the value of the command set */
-    NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+    if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+    {
+      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE),
+                NOR_CMD_DATA_CFI);
+    }
+    else
+    {
+      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+    }
+
     hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET);
 
     status = HAL_NOR_ReturnToReadMode(hnor);
@@ -472,9 +487,22 @@
     /* Send read ID command */
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE),
+                  NOR_CMD_DATA_AUTO_SELECT);
+      }
+      else
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+                  NOR_CMD_DATA_AUTO_SELECT);
+      }
     }
     else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
     {
@@ -641,9 +669,22 @@
     /* Send read data command */
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE),
+                  NOR_CMD_DATA_READ_RESET);
+      }
+      else
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+                  NOR_CMD_DATA_READ_RESET);
+      }
     }
     else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
     {
@@ -722,9 +763,21 @@
     /* Send program data command */
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE),
+                  NOR_CMD_DATA_PROGRAM);
+      }
+      else
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+      }
     }
     else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
     {
@@ -814,9 +867,22 @@
     /* Send read data command */
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE),
+                  NOR_CMD_DATA_READ_RESET);
+      }
+      else
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+                  NOR_CMD_DATA_READ_RESET);
+      }
     }
     else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
     {
@@ -909,10 +975,20 @@
 
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      /* Issue unlock command sequence */
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        /* Issue unlock command sequence */
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+      }
+      else
+      {
+        /* Issue unlock command sequence */
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+      }
       /* Write Buffer Load Command */
       NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG);
       NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U));
@@ -1012,14 +1088,26 @@
     /* Send block erase command sequence */
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
-                NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH),
-                NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH),
-                NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+      }
+      else
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+      }
       NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
     }
     else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
@@ -1097,15 +1185,28 @@
     /* Send NOR chip erase command sequence */
     if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
     {
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
-                NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH),
-                NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH),
-                NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
-      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+      if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE),
+                  NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE),
+                  NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+      }
+      else
+      {
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH),
+                  NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+        NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH),
+                  NOR_CMD_DATA_CHIP_ERASE);
+      }
     }
     else
     {
@@ -1176,8 +1277,15 @@
     }
 
     /* Send read CFI query command */
-    NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
-
+    if (uwNORMemoryDataWidth == NOR_MEMORY_8B)
+    {
+      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE),
+                NOR_CMD_DATA_CFI);
+    }
+    else
+    {
+      NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+    }
     /* read the NOR CFI information */
     pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS);
     pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS);
@@ -1201,7 +1309,7 @@
 #if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User NOR Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used to override the weak predefined callback
   * @param hnor : NOR handle
   * @param CallbackId : ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -1221,9 +1329,6 @@
     return HAL_ERROR;
   }
 
-  /* Process locked */
-  __HAL_LOCK(hnor);
-
   state = hnor->State;
   if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED))
   {
@@ -1247,14 +1352,12 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hnor);
   return status;
 }
 
 /**
   * @brief  Unregister a User NOR Callback
-  *         NOR Callback is redirected to the weak (surcharged) predefined callback
+  *         NOR Callback is redirected to the weak predefined callback
   * @param hnor : NOR handle
   * @param CallbackId : ID of the callback to be unregistered
   *        This parameter can be one of the following values:
@@ -1267,9 +1370,6 @@
   HAL_StatusTypeDef status = HAL_OK;
   HAL_NOR_StateTypeDef state;
 
-  /* Process locked */
-  __HAL_LOCK(hnor);
-
   state = hnor->State;
   if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED))
   {
@@ -1293,8 +1393,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hnor);
   return status;
 }
 #endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */
@@ -1411,7 +1509,7 @@
   *                the configuration information for NOR module.
   * @retval NOR controller state
   */
-HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor)
 {
   return hnor->State;
 }
diff --git a/Src/stm32l4xx_hal_opamp.c b/Src/stm32l4xx_hal_opamp.c
index 3796115..31cc815 100644
--- a/Src/stm32l4xx_hal_opamp.c
+++ b/Src/stm32l4xx_hal_opamp.c
@@ -130,7 +130,7 @@
            and a pointer to the user callback function.
 
       (++) Use function HAL_OPAMP_UnRegisterCallback() to reset a callback to the default
-           weak (surcharged) function. It allows to reset following callbacks:
+           weak (overridden) function. It allows to reset following callbacks:
       (+++) MspInitCallback         : OPAMP MspInit.
       (+++) MspDeInitCallback       : OPAMP MspdeInit.
       (+++) All Callbacks
@@ -1021,7 +1021,7 @@
 #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User OPAMP Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used instead of the weak (overridden) predefined callback
   * @param hopamp : OPAMP handle
   * @param CallbackID : ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -1087,7 +1087,7 @@
 
 /**
   * @brief  Unregister a User OPAMP Callback
-  *         OPAMP Callback is redirected to the weak (surcharged) predefined callback
+  *         OPAMP Callback is redirected to the weak (overridden) predefined callback
   * @param hopamp : OPAMP handle
   * @param CallbackID : ID of the callback to be unregistered
   *        This parameter can be one of the following values:
diff --git a/Src/stm32l4xx_hal_ospi.c b/Src/stm32l4xx_hal_ospi.c
index de02f21..f92a91e 100644
--- a/Src/stm32l4xx_hal_ospi.c
+++ b/Src/stm32l4xx_hal_ospi.c
@@ -52,7 +52,7 @@
      and the CS boundary using the HAL_OSPI_Init() function.
     [..]
      When using Hyperbus, configure the RW recovery time, the access time,
-     the write latency and the latency mode unsing the HAL_OSPI_HyperbusCfg()
+     the write latency and the latency mode using the HAL_OSPI_HyperbusCfg()
      function.
 
     *** Indirect functional mode ***
@@ -190,7 +190,7 @@
 
     [..]
      Use function HAL_OSPI_UnRegisterCallback() to reset a callback to the default
-     weak (surcharged) function. It allows to reset following callbacks:
+     weak (overridden) function. It allows to reset following callbacks:
      (+) ErrorCallback : callback when error occurs.
      (+) AbortCpltCallback : callback when abort is completed.
      (+) FifoThresholdCallback : callback when the fifo threshold is reached.
@@ -208,9 +208,9 @@
 
     [..]
      By default, after the HAL_OSPI_Init() and if the state is HAL_OSPI_STATE_RESET
-     all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+     all callbacks are reset to the corresponding legacy weak (overridden) functions.
      Exception done for MspInit and MspDeInit callbacks that are respectively
-     reset to the legacy weak (surcharged) functions in the HAL_OSPI_Init()
+     reset to the legacy weak (overridden) functions in the HAL_OSPI_Init()
      and HAL_OSPI_DeInit() only when these callbacks are null (not registered beforehand).
      If not, MspInit or MspDeInit are not null, the HAL_OSPI_Init() and HAL_OSPI_DeInit()
      keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
@@ -227,7 +227,7 @@
     [..]
      When The compilation define USE_HAL_OSPI_REGISTER_CALLBACKS is set to 0 or
      not defined, the callback registering feature is not available
-     and weak (surcharged) callbacks are used.
+     and weak (overridden) callbacks are used.
 
   @endverbatim
   ******************************************************************************
@@ -276,14 +276,14 @@
 /* Private variables ---------------------------------------------------------*/
 
 /* Private function prototypes -----------------------------------------------*/
-static void              OSPI_DMACplt                  (DMA_HandleTypeDef *hdma);
-static void              OSPI_DMAHalfCplt              (DMA_HandleTypeDef *hdma);
-static void              OSPI_DMAError                 (DMA_HandleTypeDef *hdma);
-static void              OSPI_DMAAbortCplt             (DMA_HandleTypeDef *hdma);
+static void              OSPI_DMACplt(DMA_HandleTypeDef *hdma);
+static void              OSPI_DMAHalfCplt(DMA_HandleTypeDef *hdma);
+static void              OSPI_DMAError(DMA_HandleTypeDef *hdma);
+static void              OSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma);
 static HAL_StatusTypeDef OSPI_WaitFlagStateUntilTimeout(OSPI_HandleTypeDef *hospi, uint32_t Flag, FlagStatus State,
                                                         uint32_t Tickstart, uint32_t Timeout);
-static HAL_StatusTypeDef OSPI_ConfigCmd                (OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd);
-static HAL_StatusTypeDef OSPIM_GetConfig               (uint8_t instance_nb, OSPIM_CfgTypeDef *cfg);
+static HAL_StatusTypeDef OSPI_ConfigCmd(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd);
+static HAL_StatusTypeDef OSPIM_GetConfig(uint8_t instance_nb, OSPIM_CfgTypeDef *cfg);
 /**
   @endcond
   */
@@ -316,7 +316,7 @@
   * @param  hospi : OSPI handle
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_OSPI_Init (OSPI_HandleTypeDef *hospi)
+HAL_StatusTypeDef HAL_OSPI_Init(OSPI_HandleTypeDef *hospi)
 {
   HAL_StatusTypeDef status = HAL_OK;
   uint32_t tickstart = HAL_GetTick();
@@ -330,20 +330,20 @@
   else
   {
     /* Check the parameters of the initialization structure */
-    assert_param(IS_OSPI_FIFO_THRESHOLD (hospi->Init.FifoThreshold));
-    assert_param(IS_OSPI_DUALQUAD_MODE  (hospi->Init.DualQuad));
-    assert_param(IS_OSPI_MEMORY_TYPE    (hospi->Init.MemoryType));
-    assert_param(IS_OSPI_DEVICE_SIZE    (hospi->Init.DeviceSize));
-    assert_param(IS_OSPI_CS_HIGH_TIME   (hospi->Init.ChipSelectHighTime));
-    assert_param(IS_OSPI_FREE_RUN_CLK   (hospi->Init.FreeRunningClock));
-    assert_param(IS_OSPI_CLOCK_MODE     (hospi->Init.ClockMode));
-    assert_param(IS_OSPI_CLK_PRESCALER  (hospi->Init.ClockPrescaler));
+    assert_param(IS_OSPI_FIFO_THRESHOLD(hospi->Init.FifoThreshold));
+    assert_param(IS_OSPI_DUALQUAD_MODE(hospi->Init.DualQuad));
+    assert_param(IS_OSPI_MEMORY_TYPE(hospi->Init.MemoryType));
+    assert_param(IS_OSPI_DEVICE_SIZE(hospi->Init.DeviceSize));
+    assert_param(IS_OSPI_CS_HIGH_TIME(hospi->Init.ChipSelectHighTime));
+    assert_param(IS_OSPI_FREE_RUN_CLK(hospi->Init.FreeRunningClock));
+    assert_param(IS_OSPI_CLOCK_MODE(hospi->Init.ClockMode));
+    assert_param(IS_OSPI_CLK_PRESCALER(hospi->Init.ClockPrescaler));
     assert_param(IS_OSPI_SAMPLE_SHIFTING(hospi->Init.SampleShifting));
-    assert_param(IS_OSPI_DHQC           (hospi->Init.DelayHoldQuarterCycle));
-    assert_param(IS_OSPI_CS_BOUNDARY    (hospi->Init.ChipSelectBoundary));
-    assert_param(IS_OSPI_DLYBYP         (hospi->Init.DelayBlockBypass));
+    assert_param(IS_OSPI_DHQC(hospi->Init.DelayHoldQuarterCycle));
+    assert_param(IS_OSPI_CS_BOUNDARY(hospi->Init.ChipSelectBoundary));
+    assert_param(IS_OSPI_DLYBYP(hospi->Init.DelayBlockBypass));
 #if   defined (OCTOSPI_DCR3_MAXTRAN)
-    assert_param(IS_OSPI_MAXTRAN        (hospi->Init.MaxTran));
+    assert_param(IS_OSPI_MAXTRAN(hospi->Init.MaxTran));
 #endif
 
     /* Initialize error code */
@@ -365,7 +365,7 @@
       hospi->StatusMatchCallback   = HAL_OSPI_StatusMatchCallback;
       hospi->TimeOutCallback       = HAL_OSPI_TimeOutCallback;
 
-      if(hospi->MspInitCallback == NULL)
+      if (hospi->MspInitCallback == NULL)
       {
         hospi->MspInitCallback = HAL_OSPI_MspInit;
       }
@@ -413,14 +413,14 @@
       {
         /* Configure clock prescaler */
         MODIFY_REG(hospi->Instance->DCR2, OCTOSPI_DCR2_PRESCALER,
-                  ((hospi->Init.ClockPrescaler - 1U) << OCTOSPI_DCR2_PRESCALER_Pos));
+                   ((hospi->Init.ClockPrescaler - 1U) << OCTOSPI_DCR2_PRESCALER_Pos));
 
         /* Configure Dual Quad mode */
         MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_DQM, hospi->Init.DualQuad);
 
         /* Configure sample shifting and delay hold quarter cycle */
         MODIFY_REG(hospi->Instance->TCR, (OCTOSPI_TCR_SSHIFT | OCTOSPI_TCR_DHQC),
-                  (hospi->Init.SampleShifting | hospi->Init.DelayHoldQuarterCycle));
+                   (hospi->Init.SampleShifting | hospi->Init.DelayHoldQuarterCycle));
 
         /* Enable OctoSPI */
         __HAL_OSPI_ENABLE(hospi);
@@ -480,27 +480,27 @@
   }
   else
   {
-     /* Disable OctoSPI */
-     __HAL_OSPI_DISABLE(hospi);
+    /* Disable OctoSPI */
+    __HAL_OSPI_DISABLE(hospi);
 
-     /* Disable free running clock if needed : must be done after OSPI disable */
-     CLEAR_BIT(hospi->Instance->DCR1, OCTOSPI_DCR1_FRCK);
+    /* Disable free running clock if needed : must be done after OSPI disable */
+    CLEAR_BIT(hospi->Instance->DCR1, OCTOSPI_DCR1_FRCK);
 
 #if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
-     if(hospi->MspDeInitCallback == NULL)
-     {
-       hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
-     }
+    if (hospi->MspDeInitCallback == NULL)
+    {
+      hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
+    }
 
-     /* DeInit the low level hardware */
-     hospi->MspDeInitCallback(hospi);
+    /* DeInit the low level hardware */
+    hospi->MspDeInitCallback(hospi);
 #else
-     /* De-initialize the low-level hardware */
-     HAL_OSPI_MspDeInit(hospi);
+    /* De-initialize the low-level hardware */
+    HAL_OSPI_MspDeInit(hospi);
 #endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
 
-     /* Reset the driver state */
-     hospi->State = HAL_OSPI_STATE_RESET;
+    /* Reset the driver state */
+    hospi->State = HAL_OSPI_STATE_RESET;
   }
 
   return status;
@@ -606,7 +606,7 @@
         hospi->pBuffPtr++;
         hospi->XferCount--;
       }
-      else if(hospi->XferCount == 0U)
+      else if (hospi->XferCount == 0U)
       {
         /* Clear flag */
         hospi->Instance->FCR = HAL_OSPI_FLAG_TC;
@@ -799,21 +799,21 @@
   assert_param(IS_OSPI_INSTRUCTION_MODE(cmd->InstructionMode));
   if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE)
   {
-    assert_param(IS_OSPI_INSTRUCTION_SIZE    (cmd->InstructionSize));
+    assert_param(IS_OSPI_INSTRUCTION_SIZE(cmd->InstructionSize));
     assert_param(IS_OSPI_INSTRUCTION_DTR_MODE(cmd->InstructionDtrMode));
   }
 
   assert_param(IS_OSPI_ADDRESS_MODE(cmd->AddressMode));
   if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE)
   {
-    assert_param(IS_OSPI_ADDRESS_SIZE    (cmd->AddressSize));
+    assert_param(IS_OSPI_ADDRESS_SIZE(cmd->AddressSize));
     assert_param(IS_OSPI_ADDRESS_DTR_MODE(cmd->AddressDtrMode));
   }
 
   assert_param(IS_OSPI_ALT_BYTES_MODE(cmd->AlternateBytesMode));
   if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE)
   {
-    assert_param(IS_OSPI_ALT_BYTES_SIZE    (cmd->AlternateBytesSize));
+    assert_param(IS_OSPI_ALT_BYTES_SIZE(cmd->AlternateBytesSize));
     assert_param(IS_OSPI_ALT_BYTES_DTR_MODE(cmd->AlternateBytesDtrMode));
   }
 
@@ -822,13 +822,13 @@
   {
     if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG)
     {
-      assert_param(IS_OSPI_NUMBER_DATA  (cmd->NbData));
+      assert_param(IS_OSPI_NUMBER_DATA(cmd->NbData));
     }
     assert_param(IS_OSPI_DATA_DTR_MODE(cmd->DataDtrMode));
-    assert_param(IS_OSPI_DUMMY_CYCLES (cmd->DummyCycles));
+    assert_param(IS_OSPI_DUMMY_CYCLES(cmd->DummyCycles));
   }
 
-  assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode));
+  assert_param(IS_OSPI_DQS_MODE(cmd->DQSMode));
   assert_param(IS_OSPI_SIOO_MODE(cmd->SIOOMode));
 
   /* Check the state of the driver */
@@ -924,33 +924,33 @@
   assert_param(IS_OSPI_INSTRUCTION_MODE(cmd->InstructionMode));
   if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE)
   {
-    assert_param(IS_OSPI_INSTRUCTION_SIZE    (cmd->InstructionSize));
+    assert_param(IS_OSPI_INSTRUCTION_SIZE(cmd->InstructionSize));
     assert_param(IS_OSPI_INSTRUCTION_DTR_MODE(cmd->InstructionDtrMode));
   }
 
   assert_param(IS_OSPI_ADDRESS_MODE(cmd->AddressMode));
   if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE)
   {
-    assert_param(IS_OSPI_ADDRESS_SIZE    (cmd->AddressSize));
+    assert_param(IS_OSPI_ADDRESS_SIZE(cmd->AddressSize));
     assert_param(IS_OSPI_ADDRESS_DTR_MODE(cmd->AddressDtrMode));
   }
 
   assert_param(IS_OSPI_ALT_BYTES_MODE(cmd->AlternateBytesMode));
   if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE)
   {
-    assert_param(IS_OSPI_ALT_BYTES_SIZE    (cmd->AlternateBytesSize));
+    assert_param(IS_OSPI_ALT_BYTES_SIZE(cmd->AlternateBytesSize));
     assert_param(IS_OSPI_ALT_BYTES_DTR_MODE(cmd->AlternateBytesDtrMode));
   }
 
   assert_param(IS_OSPI_DATA_MODE(cmd->DataMode));
   if (cmd->DataMode != HAL_OSPI_DATA_NONE)
   {
-    assert_param(IS_OSPI_NUMBER_DATA  (cmd->NbData));
+    assert_param(IS_OSPI_NUMBER_DATA(cmd->NbData));
     assert_param(IS_OSPI_DATA_DTR_MODE(cmd->DataDtrMode));
-    assert_param(IS_OSPI_DUMMY_CYCLES (cmd->DummyCycles));
+    assert_param(IS_OSPI_DUMMY_CYCLES(cmd->DummyCycles));
   }
 
-  assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode));
+  assert_param(IS_OSPI_DQS_MODE(cmd->DQSMode));
   assert_param(IS_OSPI_SIOO_MODE(cmd->SIOOMode));
 
   /* Check the state of the driver */
@@ -974,7 +974,7 @@
       if (status == HAL_OK)
       {
         /* Update the state */
-          hospi->State = HAL_OSPI_STATE_BUSY_CMD;
+        hospi->State = HAL_OSPI_STATE_BUSY_CMD;
 
         /* Enable the transfer complete and transfer error interrupts */
         __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_TE);
@@ -1005,10 +1005,10 @@
   uint32_t tickstart = HAL_GetTick();
 
   /* Check the parameters of the hyperbus configuration structure */
-  assert_param(IS_OSPI_RW_RECOVERY_TIME  (cfg->RWRecoveryTime));
-  assert_param(IS_OSPI_ACCESS_TIME       (cfg->AccessTime));
+  assert_param(IS_OSPI_RW_RECOVERY_TIME(cfg->RWRecoveryTime));
+  assert_param(IS_OSPI_ACCESS_TIME(cfg->AccessTime));
   assert_param(IS_OSPI_WRITE_ZERO_LATENCY(cfg->WriteZeroLatency));
-  assert_param(IS_OSPI_LATENCY_MODE      (cfg->LatencyMode));
+  assert_param(IS_OSPI_LATENCY_MODE(cfg->LatencyMode));
 
   /* Check the state of the driver */
   state = hospi->State;
@@ -1052,9 +1052,9 @@
 
   /* Check the parameters of the hyperbus command structure */
   assert_param(IS_OSPI_ADDRESS_SPACE(cmd->AddressSpace));
-  assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize));
-  assert_param(IS_OSPI_NUMBER_DATA  (cmd->NbData));
-  assert_param(IS_OSPI_DQS_MODE     (cmd->DQSMode));
+  assert_param(IS_OSPI_ADDRESS_SIZE(cmd->AddressSize));
+  assert_param(IS_OSPI_NUMBER_DATA(cmd->NbData));
+  assert_param(IS_OSPI_DQS_MODE(cmd->DQSMode));
 
   /* Check the state of the driver */
   if ((hospi->State == HAL_OSPI_STATE_READY) && (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS))
@@ -1238,7 +1238,7 @@
         *hospi->pBuffPtr = *((__IO uint8_t *)data_reg);
         hospi->pBuffPtr++;
         hospi->XferCount--;
-      } while(hospi->XferCount > 0U);
+      } while (hospi->XferCount > 0U);
 
       if (status == HAL_OK)
       {
@@ -1480,21 +1480,21 @@
         hospi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH;
         MODIFY_REG(hospi->hdma->Instance->CCR, DMA_CCR_DIR, hospi->hdma->Init.Direction);
 
-            /* Enable the transmit DMA Channel */
-            if (HAL_DMA_Start_IT(hospi->hdma, (uint32_t)pData, (uint32_t)&hospi->Instance->DR, hospi->XferSize) == HAL_OK)
-            {
-              /* Enable the transfer error interrupt */
-              __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE);
+        /* Enable the transmit DMA Channel */
+        if (HAL_DMA_Start_IT(hospi->hdma, (uint32_t)pData, (uint32_t)&hospi->Instance->DR, hospi->XferSize) == HAL_OK)
+        {
+          /* Enable the transfer error interrupt */
+          __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE);
 
-              /* Enable the DMA transfer by setting the DMAEN bit  */
-              SET_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
-            }
-            else
-            {
-              status = HAL_ERROR;
-              hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
-              hospi->State = HAL_OSPI_STATE_READY;
-            }
+          /* Enable the DMA transfer by setting the DMAEN bit  */
+          SET_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+        }
+        else
+        {
+          status = HAL_ERROR;
+          hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
+          hospi->State = HAL_OSPI_STATE_READY;
+        }
       }
     }
     else
@@ -1604,38 +1604,38 @@
         hospi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY;
         MODIFY_REG(hospi->hdma->Instance->CCR, DMA_CCR_DIR, hospi->hdma->Init.Direction);
 
-          /* Enable the transmit DMA Channel */
-          if (HAL_DMA_Start_IT(hospi->hdma, (uint32_t)&hospi->Instance->DR, (uint32_t)pData, hospi->XferSize) == HAL_OK)
-          {
-            /* Enable the transfer error interrupt */
-            __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE);
+        /* Enable the transmit DMA Channel */
+        if (HAL_DMA_Start_IT(hospi->hdma, (uint32_t)&hospi->Instance->DR, (uint32_t)pData, hospi->XferSize) == HAL_OK)
+        {
+          /* Enable the transfer error interrupt */
+          __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE);
 
-            /* Trig the transfer by re-writing address or instruction register */
-            if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+          /* Trig the transfer by re-writing address or instruction register */
+          if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+          {
+            WRITE_REG(hospi->Instance->AR, addr_reg);
+          }
+          else
+          {
+            if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
             {
               WRITE_REG(hospi->Instance->AR, addr_reg);
             }
             else
             {
-              if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
-              {
-                WRITE_REG(hospi->Instance->AR, addr_reg);
-              }
-              else
-              {
-                WRITE_REG(hospi->Instance->IR, ir_reg);
-              }
+              WRITE_REG(hospi->Instance->IR, ir_reg);
             }
+          }
 
-            /* Enable the DMA transfer by setting the DMAEN bit  */
-            SET_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
-          }
-          else
-          {
-            status = HAL_ERROR;
-            hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
-            hospi->State = HAL_OSPI_STATE_READY;
-          }
+          /* Enable the DMA transfer by setting the DMAEN bit  */
+          SET_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+        }
+        else
+        {
+          status = HAL_ERROR;
+          hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
+          hospi->State = HAL_OSPI_STATE_READY;
+        }
       }
     }
     else
@@ -1669,10 +1669,10 @@
 #endif /* USE_FULL_ASSERT */
 
   /* Check the parameters of the autopolling configuration structure */
-  assert_param(IS_OSPI_MATCH_MODE       (cfg->MatchMode));
-  assert_param(IS_OSPI_AUTOMATIC_STOP   (cfg->AutomaticStop));
-  assert_param(IS_OSPI_INTERVAL         (cfg->Interval));
-  assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg+1U));
+  assert_param(IS_OSPI_MATCH_MODE(cfg->MatchMode));
+  assert_param(IS_OSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
+  assert_param(IS_OSPI_INTERVAL(cfg->Interval));
+  assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg + 1U));
 
   /* Check the state */
   if ((hospi->State == HAL_OSPI_STATE_CMD_CFG) && (cfg->AutomaticStop == HAL_OSPI_AUTOMATIC_STOP_ENABLE))
@@ -1683,10 +1683,10 @@
     if (status == HAL_OK)
     {
       /* Configure registers */
-      WRITE_REG (hospi->Instance->PSMAR, cfg->Match);
-      WRITE_REG (hospi->Instance->PSMKR, cfg->Mask);
-      WRITE_REG (hospi->Instance->PIR,   cfg->Interval);
-      MODIFY_REG(hospi->Instance->CR,    (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE),
+      WRITE_REG(hospi->Instance->PSMAR, cfg->Match);
+      WRITE_REG(hospi->Instance->PSMKR, cfg->Mask);
+      WRITE_REG(hospi->Instance->PIR,   cfg->Interval);
+      MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE),
                  (cfg->MatchMode | cfg->AutomaticStop | OSPI_FUNCTIONAL_MODE_AUTO_POLLING));
 
       /* Trig the transfer by re-writing address or instruction register */
@@ -1748,10 +1748,10 @@
 #endif /* USE_FULL_ASSERT */
 
   /* Check the parameters of the autopolling configuration structure */
-  assert_param(IS_OSPI_MATCH_MODE       (cfg->MatchMode));
-  assert_param(IS_OSPI_AUTOMATIC_STOP   (cfg->AutomaticStop));
-  assert_param(IS_OSPI_INTERVAL         (cfg->Interval));
-  assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg+1U));
+  assert_param(IS_OSPI_MATCH_MODE(cfg->MatchMode));
+  assert_param(IS_OSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
+  assert_param(IS_OSPI_INTERVAL(cfg->Interval));
+  assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg + 1U));
 
   /* Check the state */
   if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
@@ -1762,10 +1762,10 @@
     if (status == HAL_OK)
     {
       /* Configure registers */
-      WRITE_REG (hospi->Instance->PSMAR, cfg->Match);
-      WRITE_REG (hospi->Instance->PSMKR, cfg->Mask);
-      WRITE_REG (hospi->Instance->PIR,   cfg->Interval);
-      MODIFY_REG(hospi->Instance->CR,    (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE),
+      WRITE_REG(hospi->Instance->PSMAR, cfg->Match);
+      WRITE_REG(hospi->Instance->PSMKR, cfg->Mask);
+      WRITE_REG(hospi->Instance->PIR,   cfg->Interval);
+      MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE),
                  (cfg->MatchMode | cfg->AutomaticStop | OSPI_FUNCTIONAL_MODE_AUTO_POLLING));
 
       /* Clear flags related to interrupt */
@@ -1940,7 +1940,7 @@
   * @param  hospi : OSPI handle
   * @retval None
   */
- __weak void HAL_OSPI_TxCpltCallback(OSPI_HandleTypeDef *hospi)
+__weak void HAL_OSPI_TxCpltCallback(OSPI_HandleTypeDef *hospi)
 {
   /* Prevent unused argument(s) compilation warning */
   UNUSED(hospi);
@@ -2013,7 +2013,7 @@
 #if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
 /**
   * @brief  Register a User OSPI Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used to override the weak predefined callback
   * @param hospi : OSPI handle
   * @param CallbackID : ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -2037,77 +2037,77 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  if(pCallback == NULL)
+  if (pCallback == NULL)
   {
     /* Update the error code */
     hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
     return HAL_ERROR;
   }
 
-  if(hospi->State == HAL_OSPI_STATE_READY)
+  if (hospi->State == HAL_OSPI_STATE_READY)
   {
     switch (CallbackID)
     {
-    case  HAL_OSPI_ERROR_CB_ID :
-      hospi->ErrorCallback = pCallback;
-      break;
-    case HAL_OSPI_ABORT_CB_ID :
-      hospi->AbortCpltCallback = pCallback;
-      break;
-    case HAL_OSPI_FIFO_THRESHOLD_CB_ID :
-      hospi->FifoThresholdCallback = pCallback;
-      break;
-    case HAL_OSPI_CMD_CPLT_CB_ID :
-      hospi->CmdCpltCallback = pCallback;
-      break;
-    case HAL_OSPI_RX_CPLT_CB_ID :
-      hospi->RxCpltCallback = pCallback;
-      break;
-    case HAL_OSPI_TX_CPLT_CB_ID :
-      hospi->TxCpltCallback = pCallback;
-      break;
-    case HAL_OSPI_RX_HALF_CPLT_CB_ID :
-      hospi->RxHalfCpltCallback = pCallback;
-      break;
-    case HAL_OSPI_TX_HALF_CPLT_CB_ID :
-      hospi->TxHalfCpltCallback = pCallback;
-      break;
-    case HAL_OSPI_STATUS_MATCH_CB_ID :
-      hospi->StatusMatchCallback = pCallback;
-      break;
-    case HAL_OSPI_TIMEOUT_CB_ID :
-      hospi->TimeOutCallback = pCallback;
-      break;
-    case HAL_OSPI_MSP_INIT_CB_ID :
-      hospi->MspInitCallback = pCallback;
-      break;
-    case HAL_OSPI_MSP_DEINIT_CB_ID :
-      hospi->MspDeInitCallback = pCallback;
-      break;
-    default :
-      /* Update the error code */
-      hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
-      /* update return status */
-      status =  HAL_ERROR;
-      break;
+      case  HAL_OSPI_ERROR_CB_ID :
+        hospi->ErrorCallback = pCallback;
+        break;
+      case HAL_OSPI_ABORT_CB_ID :
+        hospi->AbortCpltCallback = pCallback;
+        break;
+      case HAL_OSPI_FIFO_THRESHOLD_CB_ID :
+        hospi->FifoThresholdCallback = pCallback;
+        break;
+      case HAL_OSPI_CMD_CPLT_CB_ID :
+        hospi->CmdCpltCallback = pCallback;
+        break;
+      case HAL_OSPI_RX_CPLT_CB_ID :
+        hospi->RxCpltCallback = pCallback;
+        break;
+      case HAL_OSPI_TX_CPLT_CB_ID :
+        hospi->TxCpltCallback = pCallback;
+        break;
+      case HAL_OSPI_RX_HALF_CPLT_CB_ID :
+        hospi->RxHalfCpltCallback = pCallback;
+        break;
+      case HAL_OSPI_TX_HALF_CPLT_CB_ID :
+        hospi->TxHalfCpltCallback = pCallback;
+        break;
+      case HAL_OSPI_STATUS_MATCH_CB_ID :
+        hospi->StatusMatchCallback = pCallback;
+        break;
+      case HAL_OSPI_TIMEOUT_CB_ID :
+        hospi->TimeOutCallback = pCallback;
+        break;
+      case HAL_OSPI_MSP_INIT_CB_ID :
+        hospi->MspInitCallback = pCallback;
+        break;
+      case HAL_OSPI_MSP_DEINIT_CB_ID :
+        hospi->MspDeInitCallback = pCallback;
+        break;
+      default :
+        /* Update the error code */
+        hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+        /* update return status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else if (hospi->State == HAL_OSPI_STATE_RESET)
   {
     switch (CallbackID)
     {
-    case HAL_OSPI_MSP_INIT_CB_ID :
-      hospi->MspInitCallback = pCallback;
-      break;
-    case HAL_OSPI_MSP_DEINIT_CB_ID :
-      hospi->MspDeInitCallback = pCallback;
-      break;
-    default :
-      /* Update the error code */
-      hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
-      /* update return status */
-      status =  HAL_ERROR;
-      break;
+      case HAL_OSPI_MSP_INIT_CB_ID :
+        hospi->MspInitCallback = pCallback;
+        break;
+      case HAL_OSPI_MSP_DEINIT_CB_ID :
+        hospi->MspDeInitCallback = pCallback;
+        break;
+      default :
+        /* Update the error code */
+        hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+        /* update return status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else
@@ -2123,7 +2123,7 @@
 
 /**
   * @brief  Unregister a User OSPI Callback
-  *         OSPI Callback is redirected to the weak (surcharged) predefined callback
+  *         OSPI Callback is redirected to the weak predefined callback
   * @param hospi : OSPI handle
   * @param CallbackID : ID of the callback to be unregistered
   *        This parameter can be one of the following values:
@@ -2141,74 +2141,74 @@
   *          @arg @ref HAL_OSPI_MSP_DEINIT_CB_ID     OSPI MspDeInit callback ID
   * @retval status
   */
-HAL_StatusTypeDef HAL_OSPI_UnRegisterCallback (OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID)
+HAL_StatusTypeDef HAL_OSPI_UnRegisterCallback(OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID)
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  if(hospi->State == HAL_OSPI_STATE_READY)
+  if (hospi->State == HAL_OSPI_STATE_READY)
   {
     switch (CallbackID)
     {
-    case  HAL_OSPI_ERROR_CB_ID :
-      hospi->ErrorCallback = HAL_OSPI_ErrorCallback;
-      break;
-    case HAL_OSPI_ABORT_CB_ID :
-      hospi->AbortCpltCallback = HAL_OSPI_AbortCpltCallback;
-      break;
-    case HAL_OSPI_FIFO_THRESHOLD_CB_ID :
-      hospi->FifoThresholdCallback = HAL_OSPI_FifoThresholdCallback;
-      break;
-    case HAL_OSPI_CMD_CPLT_CB_ID :
-      hospi->CmdCpltCallback = HAL_OSPI_CmdCpltCallback;
-      break;
-    case HAL_OSPI_RX_CPLT_CB_ID :
-      hospi->RxCpltCallback = HAL_OSPI_RxCpltCallback;
-      break;
-    case HAL_OSPI_TX_CPLT_CB_ID :
-      hospi->TxCpltCallback = HAL_OSPI_TxCpltCallback;
-      break;
-    case HAL_OSPI_RX_HALF_CPLT_CB_ID :
-      hospi->RxHalfCpltCallback = HAL_OSPI_RxHalfCpltCallback;
-      break;
-    case HAL_OSPI_TX_HALF_CPLT_CB_ID :
-      hospi->TxHalfCpltCallback = HAL_OSPI_TxHalfCpltCallback;
-      break;
-    case HAL_OSPI_STATUS_MATCH_CB_ID :
-      hospi->StatusMatchCallback = HAL_OSPI_StatusMatchCallback;
-      break;
-    case HAL_OSPI_TIMEOUT_CB_ID :
-      hospi->TimeOutCallback = HAL_OSPI_TimeOutCallback;
-      break;
-    case HAL_OSPI_MSP_INIT_CB_ID :
-      hospi->MspInitCallback = HAL_OSPI_MspInit;
-      break;
-    case HAL_OSPI_MSP_DEINIT_CB_ID :
-      hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
-      break;
-    default :
-      /* Update the error code */
-      hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
-      /* update return status */
-      status =  HAL_ERROR;
-      break;
+      case  HAL_OSPI_ERROR_CB_ID :
+        hospi->ErrorCallback = HAL_OSPI_ErrorCallback;
+        break;
+      case HAL_OSPI_ABORT_CB_ID :
+        hospi->AbortCpltCallback = HAL_OSPI_AbortCpltCallback;
+        break;
+      case HAL_OSPI_FIFO_THRESHOLD_CB_ID :
+        hospi->FifoThresholdCallback = HAL_OSPI_FifoThresholdCallback;
+        break;
+      case HAL_OSPI_CMD_CPLT_CB_ID :
+        hospi->CmdCpltCallback = HAL_OSPI_CmdCpltCallback;
+        break;
+      case HAL_OSPI_RX_CPLT_CB_ID :
+        hospi->RxCpltCallback = HAL_OSPI_RxCpltCallback;
+        break;
+      case HAL_OSPI_TX_CPLT_CB_ID :
+        hospi->TxCpltCallback = HAL_OSPI_TxCpltCallback;
+        break;
+      case HAL_OSPI_RX_HALF_CPLT_CB_ID :
+        hospi->RxHalfCpltCallback = HAL_OSPI_RxHalfCpltCallback;
+        break;
+      case HAL_OSPI_TX_HALF_CPLT_CB_ID :
+        hospi->TxHalfCpltCallback = HAL_OSPI_TxHalfCpltCallback;
+        break;
+      case HAL_OSPI_STATUS_MATCH_CB_ID :
+        hospi->StatusMatchCallback = HAL_OSPI_StatusMatchCallback;
+        break;
+      case HAL_OSPI_TIMEOUT_CB_ID :
+        hospi->TimeOutCallback = HAL_OSPI_TimeOutCallback;
+        break;
+      case HAL_OSPI_MSP_INIT_CB_ID :
+        hospi->MspInitCallback = HAL_OSPI_MspInit;
+        break;
+      case HAL_OSPI_MSP_DEINIT_CB_ID :
+        hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
+        break;
+      default :
+        /* Update the error code */
+        hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+        /* update return status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else if (hospi->State == HAL_OSPI_STATE_RESET)
   {
     switch (CallbackID)
     {
-    case HAL_OSPI_MSP_INIT_CB_ID :
-      hospi->MspInitCallback = HAL_OSPI_MspInit;
-      break;
-    case HAL_OSPI_MSP_DEINIT_CB_ID :
-      hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
-      break;
-    default :
-      /* Update the error code */
-      hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
-      /* update return status */
-      status =  HAL_ERROR;
-      break;
+      case HAL_OSPI_MSP_INIT_CB_ID :
+        hospi->MspInitCallback = HAL_OSPI_MspInit;
+        break;
+      case HAL_OSPI_MSP_DEINIT_CB_ID :
+        hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
+        break;
+      default :
+        /* Update the error code */
+        hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+        /* update return status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else
@@ -2247,10 +2247,10 @@
   */
 
 /**
-* @brief  Abort the current transmission.
-* @param  hospi : OSPI handle
-* @retval HAL status
-*/
+  * @brief  Abort the current transmission.
+  * @param  hospi : OSPI handle
+  * @retval HAL status
+  */
 HAL_StatusTypeDef HAL_OSPI_Abort(OSPI_HandleTypeDef *hospi)
 {
   HAL_StatusTypeDef status = HAL_OK;
@@ -2315,10 +2315,10 @@
 }
 
 /**
-* @brief  Abort the current transmission (non-blocking function)
-* @param  hospi : OSPI handle
-* @retval HAL status
-*/
+  * @brief  Abort the current transmission (non-blocking function)
+  * @param  hospi : OSPI handle
+  * @retval HAL status
+  */
 HAL_StatusTypeDef HAL_OSPI_Abort_IT(OSPI_HandleTypeDef *hospi)
 {
   HAL_StatusTypeDef status = HAL_OK;
@@ -2408,7 +2408,7 @@
     hospi->Init.FifoThreshold = Threshold;
 
     /* Configure new fifo threshold */
-    MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FTHRES, ((hospi->Init.FifoThreshold-1U) << OCTOSPI_CR_FTHRES_Pos));
+    MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FTHRES, ((hospi->Init.FifoThreshold - 1U) << OCTOSPI_CR_FTHRES_Pos));
 
   }
   else
@@ -2425,7 +2425,7 @@
   * @param  hospi : OSPI handle.
   * @retval Fifo threshold
   */
-uint32_t HAL_OSPI_GetFifoThreshold(OSPI_HandleTypeDef *hospi)
+uint32_t HAL_OSPI_GetFifoThreshold(const OSPI_HandleTypeDef *hospi)
 {
   return ((READ_BIT(hospi->Instance->CR, OCTOSPI_CR_FTHRES) >> OCTOSPI_CR_FTHRES_Pos) + 1U);
 }
@@ -2442,11 +2442,11 @@
 }
 
 /**
-* @brief  Return the OSPI error code.
-* @param  hospi : OSPI handle
-* @retval OSPI Error Code
-*/
-uint32_t HAL_OSPI_GetError(OSPI_HandleTypeDef *hospi)
+  * @brief  Return the OSPI error code.
+  * @param  hospi : OSPI handle
+  * @retval OSPI Error Code
+  */
+uint32_t HAL_OSPI_GetError(const OSPI_HandleTypeDef *hospi)
 {
   return hospi->ErrorCode;
 }
@@ -2456,7 +2456,7 @@
   * @param  hospi : OSPI handle
   * @retval HAL state
   */
-uint32_t HAL_OSPI_GetState(OSPI_HandleTypeDef *hospi)
+uint32_t HAL_OSPI_GetState(const OSPI_HandleTypeDef *hospi)
 {
   /* Return OSPI handle state */
   return hospi->State;
@@ -2524,7 +2524,7 @@
   /**************** Get current configuration of the instances ****************/
   for (index = 0U; index < OSPI_NB_INSTANCE; index++)
   {
-    if (OSPIM_GetConfig(index+1U, &(IOM_cfg[index])) != HAL_OK)
+    if (OSPIM_GetConfig(index + 1U, &(IOM_cfg[index])) != HAL_OK)
     {
       status = HAL_ERROR;
       hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
@@ -2546,7 +2546,7 @@
     }
 
     /***************** Deactivation of previous configuration *****************/
-    CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].NCSPort-1U)], OCTOSPIM_PCR_NCSEN);
+    CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].NCSPort - 1U)], OCTOSPIM_PCR_NCSEN);
 #if   defined (OCTOSPIM_CR_MUXEN)
     if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) != 0U)
     {
@@ -2555,18 +2555,20 @@
 
       if (other_instance == 1U)
       {
-        SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort-1U)], OCTOSPIM_PCR_CLKSRC);
+        SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort - 1U)], OCTOSPIM_PCR_CLKSRC);
         if (IOM_cfg[other_instance].DQSPort != 0U)
         {
-          SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort-1U)], OCTOSPIM_PCR_DQSSRC);
+          SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort - 1U)], OCTOSPIM_PCR_DQSSRC);
         }
         if (IOM_cfg[other_instance].IOLowPort != HAL_OSPIM_IOPORT_NONE)
         {
-          SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLSRC_1);
+          SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort - 1U)& OSPI_IOM_PORT_MASK)], \
+                  OCTOSPIM_PCR_IOLSRC_1);
         }
         if (IOM_cfg[other_instance].IOHighPort != HAL_OSPIM_IOPORT_NONE)
         {
-          SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHSRC_1);
+          SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort - 1U)& OSPI_IOM_PORT_MASK)], \
+                  OCTOSPIM_PCR_IOHSRC_1);
         }
       }
     }
@@ -2575,18 +2577,18 @@
 #endif
       if (IOM_cfg[instance].ClkPort != 0U)
       {
-        CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].ClkPort-1U)], OCTOSPIM_PCR_CLKEN);
+        CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].ClkPort - 1U)], OCTOSPIM_PCR_CLKEN);
         if (IOM_cfg[instance].DQSPort != 0U)
         {
-          CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].DQSPort-1U)], OCTOSPIM_PCR_DQSEN);
+          CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].DQSPort - 1U)], OCTOSPIM_PCR_DQSEN);
         }
         if (IOM_cfg[instance].IOLowPort != HAL_OSPIM_IOPORT_NONE)
         {
-          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLEN);
+          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOLowPort - 1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLEN);
         }
         if (IOM_cfg[instance].IOHighPort != HAL_OSPIM_IOPORT_NONE)
         {
-          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHEN);
+          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOHighPort - 1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHEN);
         }
       }
 #if   defined (OCTOSPIM_CR_MUXEN)
@@ -2610,20 +2612,20 @@
       else
       {
 #endif
-        CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort-1U)], OCTOSPIM_PCR_CLKEN);
+        CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort - 1U)], OCTOSPIM_PCR_CLKEN);
         if (IOM_cfg[other_instance].DQSPort != 0U)
         {
-          CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort-1U)], OCTOSPIM_PCR_DQSEN);
+          CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort - 1U)], OCTOSPIM_PCR_DQSEN);
         }
-        CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].NCSPort-1U)], OCTOSPIM_PCR_NCSEN);
+        CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].NCSPort - 1U)], OCTOSPIM_PCR_NCSEN);
         if (IOM_cfg[other_instance].IOLowPort != HAL_OSPIM_IOPORT_NONE)
         {
-          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
+          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort - 1U)& OSPI_IOM_PORT_MASK)],
                     OCTOSPIM_PCR_IOLEN);
         }
         if (IOM_cfg[other_instance].IOHighPort != HAL_OSPIM_IOPORT_NONE)
         {
-          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
+          CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort - 1U)& OSPI_IOM_PORT_MASK)],
                     OCTOSPIM_PCR_IOHEN);
         }
 #if   defined (OCTOSPIM_CR_MUXEN)
@@ -2632,8 +2634,8 @@
     }
 
     /******************** Activation of new configuration *********************/
-        MODIFY_REG(OCTOSPIM->PCR[(cfg->NCSPort - 1U)], (OCTOSPIM_PCR_NCSEN | OCTOSPIM_PCR_NCSSRC),
-                  (OCTOSPIM_PCR_NCSEN | (instance << OCTOSPIM_PCR_NCSSRC_Pos)));
+    MODIFY_REG(OCTOSPIM->PCR[(cfg->NCSPort - 1U)], (OCTOSPIM_PCR_NCSEN | OCTOSPIM_PCR_NCSSRC),
+               (OCTOSPIM_PCR_NCSEN | (instance << OCTOSPIM_PCR_NCSSRC_Pos)));
 
 #if   defined (OCTOSPIM_CR_MUXEN)
     if ((cfg->Req2AckTime - 1U) > ((OCTOSPIM->CR & OCTOSPIM_CR_REQ2ACK_TIME) >> OCTOSPIM_CR_REQ2ACK_TIME_Pos))
@@ -2643,85 +2645,85 @@
 
     if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) != 0U)
     {
-      MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort-1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC), OCTOSPIM_PCR_CLKEN);
+      MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort - 1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC), OCTOSPIM_PCR_CLKEN);
       if (cfg->DQSPort != 0U)
       {
-        MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort-1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC), OCTOSPIM_PCR_DQSEN);
+        MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort - 1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC), OCTOSPIM_PCR_DQSEN);
       }
 
       if ((cfg->IOLowPort & OCTOSPIM_PCR_IOLEN) != 0U)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), OCTOSPIM_PCR_IOLEN);
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), OCTOSPIM_PCR_IOLEN);
       }
       else if (cfg->IOLowPort != HAL_OSPIM_IOPORT_NONE)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), OCTOSPIM_PCR_IOHEN);
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), OCTOSPIM_PCR_IOHEN);
       }
       else
       {
-         /* Nothing to do */
+        /* Nothing to do */
       }
 
       if ((cfg->IOHighPort & OCTOSPIM_PCR_IOLEN) != 0U)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0));
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0));
       }
       else if (cfg->IOHighPort != HAL_OSPIM_IOPORT_NONE)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0));
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0));
       }
       else
       {
-         /* Nothing to do */
+        /* Nothing to do */
       }
     }
     else
     {
 #endif
-      MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort-1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC),
-                (OCTOSPIM_PCR_CLKEN | (instance << OCTOSPIM_PCR_CLKSRC_Pos)));
+      MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort - 1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC),
+                 (OCTOSPIM_PCR_CLKEN | (instance << OCTOSPIM_PCR_CLKSRC_Pos)));
       if (cfg->DQSPort != 0U)
       {
-        MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort-1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC),
-                  (OCTOSPIM_PCR_DQSEN | (instance << OCTOSPIM_PCR_DQSSRC_Pos)));
+        MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort - 1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC),
+                   (OCTOSPIM_PCR_DQSEN | (instance << OCTOSPIM_PCR_DQSSRC_Pos)));
       }
 
       if ((cfg->IOLowPort & OCTOSPIM_PCR_IOLEN) != 0U)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC),
-                  (OCTOSPIM_PCR_IOLEN | (instance << (OCTOSPIM_PCR_IOLSRC_Pos+1U))));
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC),
+                   (OCTOSPIM_PCR_IOLEN | (instance << (OCTOSPIM_PCR_IOLSRC_Pos + 1U))));
       }
       else if (cfg->IOLowPort != HAL_OSPIM_IOPORT_NONE)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC),
-                  (OCTOSPIM_PCR_IOHEN | (instance << (OCTOSPIM_PCR_IOHSRC_Pos+1U))));
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC),
+                   (OCTOSPIM_PCR_IOHEN | (instance << (OCTOSPIM_PCR_IOHSRC_Pos + 1U))));
       }
       else
       {
-         /* Nothing to do */
+        /* Nothing to do */
       }
 
       if ((cfg->IOHighPort & OCTOSPIM_PCR_IOLEN) != 0U)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC),
-                  (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0 | (instance << (OCTOSPIM_PCR_IOLSRC_Pos+1U))));
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC),
+                   (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0 | (instance << (OCTOSPIM_PCR_IOLSRC_Pos + 1U))));
       }
       else if (cfg->IOHighPort != HAL_OSPIM_IOPORT_NONE)
       {
-        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
-                  (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC),
-                  (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0 | (instance << (OCTOSPIM_PCR_IOHSRC_Pos+1U))));
+        MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort - 1U)& OSPI_IOM_PORT_MASK)],
+                   (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC),
+                   (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0 | (instance << (OCTOSPIM_PCR_IOHSRC_Pos + 1U))));
       }
       else
       {
-         /* Nothing to do */
+        /* Nothing to do */
       }
 #if   defined (OCTOSPIM_CR_MUXEN)
     }
@@ -2756,7 +2758,7 @@
   */
 static void OSPI_DMACplt(DMA_HandleTypeDef *hdma)
 {
-  OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hdma->Parent);
+  OSPI_HandleTypeDef *hospi = (OSPI_HandleTypeDef *)(hdma->Parent);
   hospi->XferCount = 0;
 
   /* Disable the DMA transfer on the OctoSPI side */
@@ -2776,7 +2778,7 @@
   */
 static void OSPI_DMAHalfCplt(DMA_HandleTypeDef *hdma)
 {
-  OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hdma->Parent);
+  OSPI_HandleTypeDef *hospi = (OSPI_HandleTypeDef *)(hdma->Parent);
   hospi->XferCount = (hospi->XferCount >> 1);
 
   if (hospi->State == HAL_OSPI_STATE_BUSY_RX)
@@ -2804,7 +2806,7 @@
   */
 static void OSPI_DMAError(DMA_HandleTypeDef *hdma)
 {
-  OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hdma->Parent);
+  OSPI_HandleTypeDef *hospi = (OSPI_HandleTypeDef *)(hdma->Parent);
   hospi->XferCount = 0;
   hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
 
@@ -2836,7 +2838,7 @@
   */
 static void OSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma)
 {
-  OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hdma->Parent);
+  OSPI_HandleTypeDef *hospi = (OSPI_HandleTypeDef *)(hdma->Parent);
   hospi->XferCount = 0;
 
   /* Check the state */
@@ -2895,12 +2897,12 @@
                                                         FlagStatus State, uint32_t Tickstart, uint32_t Timeout)
 {
   /* Wait until flag is in expected state */
-  while((__HAL_OSPI_GET_FLAG(hospi, Flag)) != State)
+  while ((__HAL_OSPI_GET_FLAG(hospi, Flag)) != State)
   {
     /* Check for the Timeout */
     if (Timeout != HAL_MAX_DELAY)
     {
-      if(((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+      if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
       {
         hospi->State     = HAL_OSPI_STATE_ERROR;
         hospi->ErrorCode |= HAL_OSPI_ERROR_TIMEOUT;
@@ -2960,7 +2962,7 @@
 
     /* Configure the CCR register with alternate bytes communication parameters */
     MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ABMODE | OCTOSPI_CCR_ABDTR | OCTOSPI_CCR_ABSIZE),
-                           (cmd->AlternateBytesMode | cmd->AlternateBytesDtrMode | cmd->AlternateBytesSize));
+               (cmd->AlternateBytesMode | cmd->AlternateBytesDtrMode | cmd->AlternateBytesSize));
   }
 
   /* Configure the TCR register with the number of dummy cycles */
@@ -2987,9 +2989,9 @@
         MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE  | OCTOSPI_CCR_IDTR  | OCTOSPI_CCR_ISIZE  |
                                 OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE |
                                 OCTOSPI_CCR_DMODE  | OCTOSPI_CCR_DDTR),
-                               (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
-                                cmd->AddressMode     | cmd->AddressDtrMode     | cmd->AddressSize     |
-                                cmd->DataMode        | cmd->DataDtrMode));
+                   (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
+                    cmd->AddressMode     | cmd->AddressDtrMode     | cmd->AddressSize     |
+                    cmd->DataMode        | cmd->DataDtrMode));
       }
       else
       {
@@ -2998,8 +3000,8 @@
         /* Configure the CCR register with all communication parameters */
         MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE  | OCTOSPI_CCR_IDTR  | OCTOSPI_CCR_ISIZE  |
                                 OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE),
-                               (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
-                                cmd->AddressMode     | cmd->AddressDtrMode     | cmd->AddressSize));
+                   (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
+                    cmd->AddressMode     | cmd->AddressDtrMode     | cmd->AddressSize));
 
         /* The DHQC bit is linked with DDTR bit which should be activated */
         if ((hospi->Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) &&
@@ -3024,8 +3026,8 @@
         /* Configure the CCR register with all communication parameters */
         MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE |
                                 OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR),
-                               (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
-                                cmd->DataMode        | cmd->DataDtrMode));
+                   (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
+                    cmd->DataMode        | cmd->DataDtrMode));
       }
       else
       {
@@ -3033,7 +3035,7 @@
 
         /* Configure the CCR register with all communication parameters */
         MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE),
-                               (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize));
+                   (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize));
 
         /* The DHQC bit is linked with DDTR bit which should be activated */
         if ((hospi->Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) &&
@@ -3059,8 +3061,8 @@
         /* Configure the CCR register with all communication parameters */
         MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE |
                                 OCTOSPI_CCR_DMODE  | OCTOSPI_CCR_DDTR),
-                               (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize     |
-                                cmd->DataMode    | cmd->DataDtrMode));
+                   (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize | cmd->DataMode |
+                    cmd->DataDtrMode));
       }
       else
       {
@@ -3068,7 +3070,7 @@
 
         /* Configure the CCR register with all communication parameters */
         MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE),
-                               (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize));
+                   (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize));
       }
 
       /* Configure the AR register with the instruction value */
@@ -3120,7 +3122,7 @@
       {
 #endif
         value = (OCTOSPIM_PCR_CLKSRC | OCTOSPIM_PCR_DQSSRC | OCTOSPIM_PCR_NCSSRC
-               | OCTOSPIM_PCR_IOLSRC_1 | OCTOSPIM_PCR_IOHSRC_1);
+                 | OCTOSPIM_PCR_IOLSRC_1 | OCTOSPIM_PCR_IOHSRC_1);
 #if   defined (OCTOSPIM_CR_MUXEN)
       }
       else
@@ -3141,7 +3143,7 @@
         if ((reg & OCTOSPIM_PCR_CLKSRC) == (value & OCTOSPIM_PCR_CLKSRC))
         {
           /* The clock correspond to the instance passed as parameter */
-          cfg->ClkPort = index+1U;
+          cfg->ClkPort = index + 1U;
         }
       }
 
@@ -3151,7 +3153,7 @@
         if ((reg & OCTOSPIM_PCR_DQSSRC) == (value & OCTOSPIM_PCR_DQSSRC))
         {
           /* The DQS correspond to the instance passed as parameter */
-          cfg->DQSPort = index+1U;
+          cfg->DQSPort = index + 1U;
         }
       }
 
@@ -3161,7 +3163,7 @@
         if ((reg & OCTOSPIM_PCR_NCSSRC) == (value & OCTOSPIM_PCR_NCSSRC))
         {
           /* The nCS correspond to the instance passed as parameter */
-          cfg->NCSPort = index+1U;
+          cfg->NCSPort = index + 1U;
         }
       }
 
@@ -3173,11 +3175,11 @@
           /* The IO Low correspond to the instance passed as parameter */
           if ((reg & OCTOSPIM_PCR_IOLSRC_0) == 0U)
           {
-            cfg->IOLowPort = (OCTOSPIM_PCR_IOLEN | (index+1U));
+            cfg->IOLowPort = (OCTOSPIM_PCR_IOLEN | (index + 1U));
           }
           else
           {
-            cfg->IOLowPort = (OCTOSPIM_PCR_IOHEN | (index+1U));
+            cfg->IOLowPort = (OCTOSPIM_PCR_IOHEN | (index + 1U));
           }
         }
       }
@@ -3190,11 +3192,11 @@
           /* The IO High correspond to the instance passed as parameter */
           if ((reg & OCTOSPIM_PCR_IOHSRC_0) == 0U)
           {
-            cfg->IOHighPort = (OCTOSPIM_PCR_IOLEN | (index+1U));
+            cfg->IOHighPort = (OCTOSPIM_PCR_IOLEN | (index + 1U));
           }
           else
           {
-            cfg->IOHighPort = (OCTOSPIM_PCR_IOHEN | (index+1U));
+            cfg->IOHighPort = (OCTOSPIM_PCR_IOHEN | (index + 1U));
           }
         }
       }
diff --git a/Src/stm32l4xx_hal_pcd.c b/Src/stm32l4xx_hal_pcd.c
index 80f173c..f6c0695 100644
--- a/Src/stm32l4xx_hal_pcd.c
+++ b/Src/stm32l4xx_hal_pcd.c
@@ -37,7 +37,8 @@
 
      (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
          (##) Enable the PCD/USB Low Level interface clock using
-              (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral
+              (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device FS peripheral
+              (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
 
          (##) Initialize the related GPIO clocks
          (##) Configure PCD pin-out
@@ -209,7 +210,9 @@
     /* Init ep structure */
     hpcd->IN_ep[i].is_in = 1U;
     hpcd->IN_ep[i].num = i;
+#if defined (USB_OTG_FS)
     hpcd->IN_ep[i].tx_fifo_num = i;
+#endif /* defined (USB_OTG_FS) */
     /* Control until ep is activated */
     hpcd->IN_ep[i].type = EP_TYPE_CTRL;
     hpcd->IN_ep[i].maxpacket = 0U;
@@ -331,7 +334,7 @@
   *          @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID
   *          @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID
   *          @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID
-  *          @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID
+  *          @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID
   *          @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID
   *          @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID
   * @param  pCallback pointer to the Callback function
@@ -445,7 +448,7 @@
   *          @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID
   *          @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID
   *          @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID
-  *          @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID
+  *          @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID
   *          @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID
   *          @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID
   * @retval HAL status
@@ -1945,11 +1948,14 @@
   ep->maxpacket = ep_mps;
   ep->type = ep_type;
 
+#if defined (USB_OTG_FS)
   if (ep->is_in != 0U)
   {
     /* Assign a Tx FIFO */
     ep->tx_fifo_num = ep->num;
   }
+#endif /* defined (USB_OTG_FS) */
+
   /* Set initial data PID. */
   if (ep_type == EP_TYPE_BULK)
   {
@@ -1983,7 +1989,7 @@
     ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK];
     ep->is_in = 0U;
   }
-  ep->num   = ep_addr & EP_ADDR_MSK;
+  ep->num = ep_addr & EP_ADDR_MSK;
 
   __HAL_LOCK(hpcd);
   (void)USB_DeactivateEndpoint(hpcd->Instance, ep);
@@ -2013,14 +2019,7 @@
   ep->is_in = 0U;
   ep->num = ep_addr & EP_ADDR_MSK;
 
-  if ((ep_addr & EP_ADDR_MSK) == 0U)
-  {
-    (void)USB_EP0StartXfer(hpcd->Instance, ep);
-  }
-  else
-  {
-    (void)USB_EPStartXfer(hpcd->Instance, ep);
-  }
+  (void)USB_EPStartXfer(hpcd->Instance, ep);
 
   return HAL_OK;
 }
@@ -2031,7 +2030,7 @@
   * @param  ep_addr endpoint address
   * @retval Data Size
   */
-uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr)
 {
   return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count;
 }
@@ -2060,14 +2059,7 @@
   ep->is_in = 1U;
   ep->num = ep_addr & EP_ADDR_MSK;
 
-  if ((ep_addr & EP_ADDR_MSK) == 0U)
-  {
-    (void)USB_EP0StartXfer(hpcd->Instance, ep);
-  }
-  else
-  {
-    (void)USB_EPStartXfer(hpcd->Instance, ep);
-  }
+  (void)USB_EPStartXfer(hpcd->Instance, ep);
 
   return HAL_OK;
 }
@@ -2245,7 +2237,7 @@
   * @param  hpcd PCD handle
   * @retval HAL state
   */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd)
 {
   return hpcd->State;
 }
@@ -2589,7 +2581,7 @@
         }
         else
         {
-          (void) USB_EPStartXfer(hpcd->Instance, ep);
+          (void)USB_EPStartXfer(hpcd->Instance, ep);
         }
       }
 
diff --git a/Src/stm32l4xx_hal_pcd_ex.c b/Src/stm32l4xx_hal_pcd_ex.c
index bd98b37..5d7a0bf 100644
--- a/Src/stm32l4xx_hal_pcd_ex.c
+++ b/Src/stm32l4xx_hal_pcd_ex.c
@@ -180,7 +180,7 @@
   (without charging capability) */
   USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN;
   HAL_Delay(50U);
-  USBx->GCCFG |=  USB_OTG_GCCFG_PDEN;
+  USBx->GCCFG |= USB_OTG_GCCFG_PDEN;
   HAL_Delay(50U);
 
   if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U)
@@ -196,9 +196,9 @@
   {
     /* start secondary detection to check connection to Charging Downstream
     Port or Dedicated Charging Port */
-    USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN;
+    USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN);
     HAL_Delay(50U);
-    USBx->GCCFG |=  USB_OTG_GCCFG_SDEN;
+    USBx->GCCFG |= USB_OTG_GCCFG_SDEN;
     HAL_Delay(50U);
 
     if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET)
diff --git a/Src/stm32l4xx_hal_pssi.c b/Src/stm32l4xx_hal_pssi.c
index 882e338..eb9c00d 100644
--- a/Src/stm32l4xx_hal_pssi.c
+++ b/Src/stm32l4xx_hal_pssi.c
@@ -130,7 +130,7 @@
      keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
 
      Callbacks can be registered/unregistered in @ref HAL_PSSI_STATE_READY state only.
-     Exception for MspInit/MspDeInit functions that can be registered/unregistered
+     Exception done MspInit/MspDeInit functions that can be registered/unregistered
      in @ref HAL_PSSI_STATE_READY or @ref HAL_PSSI_STATE_RESET state,
      thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
      Then, the user first registers the MspInit/MspDeInit user callbacks
@@ -142,7 +142,6 @@
        (@) You can refer to the PSSI HAL driver header file for more useful macros
 
   @endverbatim
-  ******************************************************************************
   */
 
 /* Includes ------------------------------------------------------------------*/
@@ -152,17 +151,26 @@
   * @{
   */
 
-#if defined(PSSI)
-
-/** @addtogroup PSSI PSSI
+/** @defgroup PSSI PSSI
   * @brief PSSI HAL module driver
   * @{
   */
 
 #ifdef HAL_PSSI_MODULE_ENABLED
-
+#if defined(PSSI)
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
+
+/** @defgroup PSSI_Private_Define PSSI Private Define
+  * @{
+  */
+
+
+
+/**
+  * @}
+  */
+
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -185,7 +193,10 @@
 
 
 /* Private functions to handle flags during polling transfer */
-static HAL_StatusTypeDef PSSI_WaitOnStatusUntilTimeout(PSSI_HandleTypeDef *hpssi, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef PSSI_WaitOnStatusUntilTimeout(PSSI_HandleTypeDef *hpssi, uint32_t Flag, FlagStatus Status,
+                                                       uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
 
 
 /**
@@ -194,19 +205,19 @@
 
 /* Exported functions --------------------------------------------------------*/
 
-/** @addtogroup PSSI_Exported_Functions PSSI Exported Functions
+/** @defgroup PSSI_Exported_Functions PSSI Exported Functions
   * @{
   */
 
-/** @addtogroup PSSI_Exported_Functions_Group1 Initialization and de-initialization functions
- *  @brief    Initialization and Configuration functions
- *
+/** @defgroup PSSI_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
 @verbatim
  ===============================================================================
               ##### Initialization and de-initialization functions #####
  ===============================================================================
     [..]  This subsection provides a set of functions allowing to initialize and
-          de-initialize the PSSIx peripheral:
+          deinitialize the PSSIx peripheral:
 
       (+) User must implement HAL_PSSI_MspInit() function in which he configures
           all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
@@ -227,7 +238,7 @@
 
 /**
   * @brief  Initializes the PSSI according to the specified parameters
-  *         in the PSSI_InitTypeDef and initializes the associated handle.
+  *         in the PSSI_InitTypeDef and initialize the associated handle.
   * @param  hpssi Pointer to a PSSI_HandleTypeDef structure that contains
   *                the configuration information for the specified PSSI.
   * @retval HAL status
@@ -277,8 +288,9 @@
   /*---------------------------- PSSIx CR Configuration ----------------------*/
   /* Configure PSSIx: Control Signal and Bus Width*/
 
-  MODIFY_REG(hpssi->Instance->CR,PSSI_CR_DERDYCFG|PSSI_CR_EDM|PSSI_CR_DEPOL|PSSI_CR_RDYPOL,
-             hpssi->Init.ControlSignal|hpssi->Init.DataEnablePolarity|hpssi->Init.ReadyPolarity|hpssi->Init.BusWidth);
+  MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DERDYCFG | PSSI_CR_EDM | PSSI_CR_DEPOL | PSSI_CR_RDYPOL,
+             hpssi->Init.ControlSignal | hpssi->Init.DataEnablePolarity |
+             hpssi->Init.ReadyPolarity | hpssi->Init.BusWidth);
 
   hpssi->ErrorCode = HAL_PSSI_ERROR_NONE;
   hpssi->State = HAL_PSSI_STATE_READY;
@@ -287,7 +299,7 @@
 }
 
 /**
-  * @brief  De-Initialize the PSSI peripheral.
+  * @brief  DeInitialize the PSSI peripheral.
   * @param  hpssi Pointer to a PSSI_HandleTypeDef structure that contains
   *                the configuration information for the specified PSSI.
   * @retval HAL status
@@ -313,7 +325,7 @@
     hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit; /* Legacy weak MspDeInit  */
   }
 
-  /* De-Init the low level hardware: GPIO, CLOCK, NVIC */
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
   hpssi->MspDeInitCallback(hpssi);
 
   hpssi->ErrorCode = HAL_PSSI_ERROR_NONE;
@@ -336,7 +348,7 @@
   /* Prevent unused argument(s) compilation warning */
   UNUSED(hpssi);
 
-  /* NOTE : This function should not be modified; when the callback is needed,
+  /* NOTE : This function should not be modified, when the callback is needed,
             the HAL_PSSI_MspInit can be implemented in the user file
    */
 }
@@ -360,6 +372,9 @@
 /**
   * @brief  Register a User PSSI Callback
   *         To be used instead of the weak predefined callback
+  * @note   The HAL_PSSI_RegisterCallback() may be called before HAL_PSSI_Init() in
+  *         HAL_PSSI_STATE_RESET to register callbacks for HAL_PSSI_MSPINIT_CB_ID
+  *         and HAL_PSSI_MSPDEINIT_CB_ID.
   * @param  hpssi Pointer to a PSSI_HandleTypeDef structure that contains
   *                the configuration information for the specified PSSI.
   * @param  CallbackID ID of the callback to be registered
@@ -373,7 +388,8 @@
   * @param  pCallback pointer to the Callback function
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID, pPSSI_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID,
+                                            pPSSI_CallbackTypeDef pCallback)
 {
   HAL_StatusTypeDef status = HAL_OK;
 
@@ -384,8 +400,6 @@
 
     return HAL_ERROR;
   }
-  /* Process locked */
-  __HAL_LOCK(hpssi);
 
   if (HAL_PSSI_STATE_READY == hpssi->State)
   {
@@ -454,14 +468,15 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hpssi);
   return status;
 }
 
 /**
-  * @brief  Unregister a PSSI Callback
+  * @brief  Unregister an PSSI Callback
   *         PSSI callback is redirected to the weak predefined callback
+  * @note   The HAL_PSSI_UnRegisterCallback() may be called before HAL_PSSI_Init() in
+  *         HAL_PSSI_STATE_RESET to un-register callbacks for HAL_PSSI_MSPINIT_CB_ID
+  *         and HAL_PSSI_MSPDEINIT_CB_ID.
   * @param  hpssi Pointer to a PSSI_HandleTypeDef structure that contains
   *                the configuration information for the specified PSSI.
   * @param  CallbackID ID of the callback to be unregistered
@@ -478,35 +493,32 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hpssi);
-
   if (HAL_PSSI_STATE_READY == hpssi->State)
   {
     switch (CallbackID)
     {
       case HAL_PSSI_TX_COMPLETE_CB_ID :
-        hpssi->TxCpltCallback = HAL_PSSI_TxCpltCallback; /* Legacy weak TxCpltCallback */
+        hpssi->TxCpltCallback = HAL_PSSI_TxCpltCallback;             /* Legacy weak TxCpltCallback     */
         break;
 
       case HAL_PSSI_RX_COMPLETE_CB_ID :
-        hpssi->RxCpltCallback = HAL_PSSI_RxCpltCallback;   /* Legacy weak RxCpltCallback  */
+        hpssi->RxCpltCallback = HAL_PSSI_RxCpltCallback;             /* Legacy weak RxCpltCallback     */
         break;
 
       case HAL_PSSI_ERROR_CB_ID :
-        hpssi->ErrorCallback = HAL_PSSI_ErrorCallback;               /* Legacy weak ErrorCallback        */
+        hpssi->ErrorCallback = HAL_PSSI_ErrorCallback;               /* Legacy weak ErrorCallback      */
         break;
 
       case HAL_PSSI_ABORT_CB_ID :
-        hpssi->AbortCpltCallback = HAL_PSSI_AbortCpltCallback;       /* Legacy weak AbortCpltCallback    */
+        hpssi->AbortCpltCallback = HAL_PSSI_AbortCpltCallback;       /* Legacy weak AbortCpltCallback  */
         break;
 
       case HAL_PSSI_MSPINIT_CB_ID :
-        hpssi->MspInitCallback = HAL_PSSI_MspInit;                   /* Legacy weak MspInit              */
+        hpssi->MspInitCallback = HAL_PSSI_MspInit;                   /* Legacy weak MspInit            */
         break;
 
       case HAL_PSSI_MSPDEINIT_CB_ID :
-        hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit;               /* Legacy weak MspDeInit            */
+        hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit;               /* Legacy weak MspDeInit          */
         break;
 
       default :
@@ -523,11 +535,11 @@
     switch (CallbackID)
     {
       case HAL_PSSI_MSPINIT_CB_ID :
-        hpssi->MspInitCallback = HAL_PSSI_MspInit;                   /* Legacy weak MspInit              */
+        hpssi->MspInitCallback = HAL_PSSI_MspInit;                   /* Legacy weak MspInit            */
         break;
 
       case HAL_PSSI_MSPDEINIT_CB_ID :
-        hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit;               /* Legacy weak MspDeInit            */
+        hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit;               /* Legacy weak MspDeInit          */
         break;
 
       default :
@@ -548,8 +560,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hpssi);
   return status;
 }
 
@@ -558,9 +568,9 @@
   * @}
   */
 
-/** @addtogroup PSSI_Exported_Functions_Group2 Input and Output operation functions
- *  @brief   Data transfers functions
- *
+/** @defgroup PSSI_Exported_Functions_Group2 Input and Output operation functions
+  *  @brief   Data transfers functions
+  *
 @verbatim
  ===============================================================================
                       ##### IO operation functions #####
@@ -576,7 +586,7 @@
        (++) No-Blocking mode : The communication is performed using DMA.
             These functions return the status of the transfer startup.
             The end of the data processing will be indicated through the
-            dedicated DMA IRQ .
+            dedicated  the DMA IRQ .
 
     (#) Blocking mode functions are :
         (++) HAL_PSSI_Transmit()
@@ -586,7 +596,7 @@
         (++) HAL_PSSI_Transmit_DMA()
         (++) HAL_PSSI_Receive_DMA()
 
-    (#) A set of callbacks are provided in non Blocking mode:
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
         (++) HAL_PSSI_TxCpltCallback()
         (++) HAL_PSSI_RxCpltCallback()
         (++) HAL_PSSI_ErrorCallback()
@@ -611,8 +621,8 @@
   uint32_t  transfer_size = Size;
 
   if (((hpssi->Init.DataWidth == HAL_PSSI_8BITS) && (hpssi->Init.BusWidth != HAL_PSSI_8LINES)) ||
-      ((hpssi->Init.DataWidth == HAL_PSSI_16BITS) && ((Size%2U) != 0U)) ||
-      ((hpssi->Init.DataWidth == HAL_PSSI_32BITS) && ((Size%4U) != 0U)))
+      ((hpssi->Init.DataWidth == HAL_PSSI_16BITS) && ((Size % 2U) != 0U)) ||
+      ((hpssi->Init.DataWidth == HAL_PSSI_32BITS) && ((Size % 4U) != 0U)))
   {
     hpssi->ErrorCode = HAL_PSSI_ERROR_NOT_SUPPORTED;
     return HAL_ERROR;
@@ -630,7 +640,7 @@
 
     /* Configure transfer parameters */
     hpssi->Instance->CR |= PSSI_CR_OUTEN_OUTPUT |
-      ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE)?0U:PSSI_CR_CKPOL);
+                           ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? 0U : PSSI_CR_CKPOL);
     /* DMA Disable */
     hpssi->Instance->CR &= PSSI_CR_DMA_DISABLE;
 
@@ -644,7 +654,7 @@
       {
         /* Init tickstart for timeout management*/
         tickstart = HAL_GetTick();
-        /* Wait until Fifo is ready (until one byte flag is set) to transfer */
+        /* Wait until Fifo is ready to transfer one byte flag is set */
         if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT1B, RESET, Timeout, tickstart) != HAL_OK)
         {
           hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT;
@@ -664,13 +674,14 @@
     }
     else if (hpssi->Init.DataWidth == HAL_PSSI_16BITS)
     {
-      uint8_t *pbuffer = pData;
-      uint16_t data;
+      uint16_t *pbuffer = (uint16_t *)pData;
+      __IO uint16_t *dr = (__IO uint16_t *)(&hpssi->Instance->DR);
+
       while (transfer_size > 0U)
       {
         /* Init tickstart for timeout management*/
         tickstart = HAL_GetTick();
-        /* Wait until Fifo is ready (until four bytes flag is set) to transfer */
+        /* Wait until Fifo is ready to transfer four bytes flag is set */
         if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK)
         {
           hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT;
@@ -680,26 +691,22 @@
           return HAL_ERROR;
         }
         /* Write data to DR */
-        data = (uint16_t)*pbuffer ;
-        pbuffer++;
-        data = (((uint16_t)*pbuffer) << 8U) | data;
-        pbuffer++;
-       *(__IO uint32_t *)((uint32_t)(&hpssi->Instance->DR)) = data;
+        *dr = *pbuffer;
 
-        /* Decrement Transfer Size */
+        /* Increment Buffer pointer */
+        pbuffer++;
         transfer_size -= 2U;
 
       }
     }
     else if (hpssi->Init.DataWidth == HAL_PSSI_32BITS)
     {
-      uint8_t *pbuffer = pData;
-      uint32_t data;
+      uint32_t *pbuffer = (uint32_t *)pData;
       while (transfer_size > 0U)
       {
         /* Init tickstart for timeout management*/
         tickstart = HAL_GetTick();
-        /* Wait until Fifo is ready (until four bytes flag is set) to transfer */
+        /* Wait until Fifo is ready to transfer four bytes flag is set */
         if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK)
         {
           hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT;
@@ -709,17 +716,10 @@
           return HAL_ERROR;
         }
         /* Write data to DR */
-        data = (uint32_t)*pbuffer ;
-        pbuffer++;
-        data = (((uint32_t)*pbuffer) << 8U) | data;
-        pbuffer++;
-        data = (((uint32_t)*pbuffer) << 16U) | data;
-        pbuffer++;
-        data = (((uint32_t)*pbuffer) << 24U) | data;
-        pbuffer++;
-        *(__IO uint32_t *)(&hpssi->Instance->DR) = data;
+        *(__IO uint32_t *)(&hpssi->Instance->DR) = *pbuffer;
 
-        /* Decrement Transfer Size */
+        /* Increment Buffer pointer */
+        pbuffer++;
         transfer_size -= 4U;
       }
 
@@ -774,8 +774,8 @@
   uint32_t  transfer_size = Size;
 
   if (((hpssi->Init.DataWidth == HAL_PSSI_8BITS) && (hpssi->Init.BusWidth != HAL_PSSI_8LINES)) ||
-      ((hpssi->Init.DataWidth == HAL_PSSI_16BITS) && ((Size%2U) != 0U)) ||
-      ((hpssi->Init.DataWidth == HAL_PSSI_32BITS) && ((Size%4U) != 0U)))
+      ((hpssi->Init.DataWidth == HAL_PSSI_16BITS) && ((Size % 2U) != 0U)) ||
+      ((hpssi->Init.DataWidth == HAL_PSSI_32BITS) && ((Size % 4U) != 0U)))
   {
     hpssi->ErrorCode = HAL_PSSI_ERROR_NOT_SUPPORTED;
     return HAL_ERROR;
@@ -792,9 +792,9 @@
     /* Disable the selected PSSI peripheral */
     HAL_PSSI_DISABLE(hpssi);
     /* Configure transfer parameters */
-    hpssi->Instance->CR |= PSSI_CR_OUTEN_INPUT |((hpssi->Init.ClockPolarity == HAL_PSSI_FALLING_EDGE)?0U:PSSI_CR_CKPOL);
-    
-    
+    hpssi->Instance->CR |= PSSI_CR_OUTEN_INPUT |
+                           ((hpssi->Init.ClockPolarity == HAL_PSSI_FALLING_EDGE) ? 0U : PSSI_CR_CKPOL);
+
     /* DMA Disable */
     hpssi->Instance->CR &= PSSI_CR_DMA_DISABLE;
 
@@ -808,7 +808,7 @@
       {
         /* Init tickstart for timeout management*/
         tickstart = HAL_GetTick();
-        /* Wait until Fifo is ready (until one byte flag is set) to receive */
+        /* Wait until Fifo is ready to receive one byte flag is set */
         if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT1B, RESET, Timeout, tickstart) != HAL_OK)
         {
           hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT;
@@ -825,13 +825,14 @@
     }
     else if (hpssi->Init.DataWidth == HAL_PSSI_16BITS)
     {
-      uint8_t *pbuffer = pData;
-      uint16_t data;
+      uint16_t *pbuffer = (uint16_t *)pData;
+      __IO uint16_t *dr = (__IO uint16_t *)(&hpssi->Instance->DR);
+
       while (transfer_size > 0U)
       {
         /* Init tickstart for timeout management*/
         tickstart = HAL_GetTick();
-        /* Wait until Fifo is ready (until four bytes flag is set) to receive */
+        /* Wait until Fifo is ready to receive four bytes flag is set */
         if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK)
         {
           hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT;
@@ -842,23 +843,21 @@
         }
 
         /* Read data from DR */
-        data = *(__IO uint32_t *)((uint32_t)&hpssi->Instance->DR);
-        *pbuffer = (uint8_t)(data & 0x0FFU);
-        pbuffer++;
-        *pbuffer = (uint8_t)(data >> 8U);
+        *pbuffer = *dr;
         pbuffer++;
         transfer_size -= 2U;
+
       }
     }
     else if (hpssi->Init.DataWidth == HAL_PSSI_32BITS)
     {
-      uint8_t *pbuffer = pData;
-      uint32_t data;
+      uint32_t *pbuffer = (uint32_t *)pData;
+
       while (transfer_size > 0U)
       {
         /* Init tickstart for timeout management*/
         tickstart = HAL_GetTick();
-        /* Wait until Fifo is ready (until four bytes flag is set) to receive */
+        /* Wait until Fifo is ready to receive four bytes flag is set */
         if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK)
         {
           hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT;
@@ -869,14 +868,7 @@
         }
 
         /* Read data from DR */
-        data = *(__IO uint32_t *)(&hpssi->Instance->DR);
-        *pbuffer = (uint8_t)(data & 0x0FFU);
-        pbuffer++;
-        *pbuffer = (uint8_t)((data & 0x0FF00U) >> 8U);
-        pbuffer++;
-        *pbuffer = (uint8_t)((data & 0x0FF0000U) >> 16U);
-        pbuffer++;
-        *pbuffer = (uint8_t)((data & 0xFF000000U) >> 24U);
+        *pbuffer = *(__IO uint32_t *)(&hpssi->Instance->DR);
         pbuffer++;
         transfer_size -= 4U;
 
@@ -900,6 +892,7 @@
       return HAL_ERROR;
     }
 
+
     hpssi->State = HAL_PSSI_STATE_READY;
 
     /* Process Unlocked */
@@ -956,16 +949,18 @@
       {
 
         /* Configure BusWidth */
-        if( hpssi->hdmatx->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
-        {
-          MODIFY_REG(hpssi->Instance->CR,PSSI_CR_DMAEN|PSSI_CR_OUTEN|PSSI_CR_CKPOL,PSSI_CR_DMA_ENABLE | PSSI_CR_OUTEN_OUTPUT |
-                     ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE)?0U:PSSI_CR_CKPOL)); 
-        }
-        else
-        {
-          MODIFY_REG(hpssi->Instance->CR,PSSI_CR_DMAEN|PSSI_CR_OUTEN|PSSI_CR_CKPOL,PSSI_CR_DMA_ENABLE | hpssi->Init.BusWidth | PSSI_CR_OUTEN_OUTPUT |
-                     ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE)?0U:PSSI_CR_CKPOL)); 
-        }
+          if (hpssi->hdmatx->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
+          {
+            MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL,
+                       PSSI_CR_DMA_ENABLE | PSSI_CR_OUTEN_OUTPUT |
+                       ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? 0U : PSSI_CR_CKPOL));
+          }
+          else
+          {
+            MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL,
+                       PSSI_CR_DMA_ENABLE | hpssi->Init.BusWidth | PSSI_CR_OUTEN_OUTPUT |
+                       ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? 0U : PSSI_CR_CKPOL));
+          }
 
         /* Set the PSSI DMA transfer complete callback */
         hpssi->hdmatx->XferCpltCallback = PSSI_DMATransmitCplt;
@@ -978,7 +973,8 @@
         hpssi->hdmatx->XferAbortCallback = NULL;
 
         /* Enable the DMA  */
-        dmaxferstatus = HAL_DMA_Start_IT(hpssi->hdmatx, (uint32_t)pData, (uint32_t)&hpssi->Instance->DR, hpssi->XferSize);
+        dmaxferstatus = HAL_DMA_Start_IT(hpssi->hdmatx, (uint32_t)pData, (uint32_t)&hpssi->Instance->DR,
+                                         hpssi->XferSize);
       }
       else
       {
@@ -1092,18 +1088,19 @@
     {
       if (hpssi->hdmarx != NULL)
       {
-        
+
         /* Configure BusWidth */
-        if( hpssi->hdmatx->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
-        {
-          MODIFY_REG(hpssi->Instance->CR,PSSI_CR_DMAEN|PSSI_CR_OUTEN|PSSI_CR_CKPOL,PSSI_CR_DMA_ENABLE |
-                     ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE)?PSSI_CR_CKPOL:0U)); 
-        }
-        else
-        {
-          MODIFY_REG(hpssi->Instance->CR,PSSI_CR_DMAEN|PSSI_CR_OUTEN|PSSI_CR_CKPOL,PSSI_CR_DMA_ENABLE | hpssi->Init.BusWidth |
-                     ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE)?PSSI_CR_CKPOL:0U)); 
-        }
+          if (hpssi->hdmatx->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
+          {
+            MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL, PSSI_CR_DMA_ENABLE |
+                       ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? PSSI_CR_CKPOL : 0U));
+          }
+          else
+          {
+            MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL,
+                       PSSI_CR_DMA_ENABLE | hpssi->Init.BusWidth |
+                       ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? PSSI_CR_CKPOL : 0U));
+          }
 
         /* Set the PSSI DMA transfer complete callback */
         hpssi->hdmarx->XferCpltCallback = PSSI_DMAReceiveCplt;
@@ -1116,7 +1113,8 @@
         hpssi->hdmarx->XferAbortCallback = NULL;
 
         /* Enable the DMA  */
-        dmaxferstatus = HAL_DMA_Start_IT(hpssi->hdmarx, (uint32_t)&hpssi->Instance->DR, (uint32_t)pData, hpssi->XferSize);
+        dmaxferstatus = HAL_DMA_Start_IT(hpssi->hdmarx, (uint32_t)&hpssi->Instance->DR, (uint32_t)pData,
+                                         hpssi->XferSize);
       }
       else
       {
@@ -1271,8 +1269,8 @@
   */
 
 /** @addtogroup PSSI_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
+  * @{
+  */
 
 /**
   * @brief  This function handles PSSI event interrupt request.
@@ -1356,8 +1354,14 @@
     /* If state is an abort treatment on going, don't change state */
     if (hpssi->State == HAL_PSSI_STATE_ABORT)
     {
+      hpssi->State = HAL_PSSI_STATE_READY;
+
       /* Process Unlocked */
       __HAL_UNLOCK(hpssi);
+
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+      hpssi->AbortCpltCallback(hpssi);
+
     }
     else
     {
@@ -1386,7 +1390,7 @@
   /* Prevent unused argument(s) compilation warning */
   UNUSED(hpssi);
 
-  /* NOTE : This function should not be modified; when the callback is needed,
+  /* NOTE : This function should not be modified, when the callback is needed,
             the HAL_PSSI_TxCpltCallback can be implemented in the user file
    */
 }
@@ -1402,7 +1406,7 @@
   /* Prevent unused argument(s) compilation warning */
   UNUSED(hpssi);
 
-  /* NOTE : This function should not be modified; when the callback is needed,
+  /* NOTE : This function should not be modified, when the callback is needed,
             the HAL_PSSI_RxCpltCallback can be implemented in the user file
    */
 }
@@ -1419,8 +1423,8 @@
   /* Prevent unused argument(s) compilation warning */
   UNUSED(hpssi);
 
-  /* NOTE : This function should not be modified; when the callback is needed,
-            the HAL_PSSI_ErrorCallback can be implemented in the user file
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_PSSI_ErrorCallback could be implemented in the user file
    */
 }
 
@@ -1435,8 +1439,8 @@
   /* Prevent unused argument(s) compilation warning */
   UNUSED(hpssi);
 
-  /* NOTE : This function should not be modified; when the callback is needed,
-            the HAL_PSSI_AbortCpltCallback can be implemented in the user file
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_PSSI_AbortCpltCallback could be implemented in the user file
    */
 }
 
@@ -1444,9 +1448,9 @@
   * @}
   */
 
-/** @addtogroup PSSI_Exported_Functions_Group3 Peripheral State, Mode and Error functions
- *  @brief   Peripheral State, Mode and Error functions
- *
+/** @defgroup PSSI_Exported_Functions_Group3 Peripheral State and Error functions
+  *  @brief   Peripheral State, Mode and Error functions
+  *
 @verbatim
  ===============================================================================
             ##### Peripheral State, Mode and Error functions #####
@@ -1473,11 +1477,11 @@
 
 
 /**
-* @brief  Return the PSSI error code.
+  * @brief  Return the PSSI error code.
   * @param  hpssi Pointer to a PSSI_HandleTypeDef structure that contains
   *              the configuration information for the specified PSSI.
-* @retval PSSI Error Code
-*/
+  * @retval PSSI Error Code
+  */
 uint32_t HAL_PSSI_GetError(PSSI_HandleTypeDef *hpssi)
 {
   return hpssi->ErrorCode;
@@ -1571,8 +1575,15 @@
   /* If state is an abort treatment on going, don't change state */
   if (hpssi->State == HAL_PSSI_STATE_ABORT)
   {
+    hpssi->State = HAL_PSSI_STATE_READY;
+
     /* Process Unlocked */
     __HAL_UNLOCK(hpssi);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+
+    hpssi->AbortCpltCallback(hpssi);
+
   }
   else
   {
@@ -1595,7 +1606,8 @@
   */
 void PSSI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
 {
-  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  /* Derogation MISRAC2012-Rule-11.5 */
+  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
 
   uint32_t tmperror;
 
@@ -1636,7 +1648,8 @@
   */
 void PSSI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
 {
-  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  /* Derogation MISRAC2012-Rule-11.5 */
+  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
 
   uint32_t tmperror;
 
@@ -1677,7 +1690,8 @@
   */
 void PSSI_DMAAbort(DMA_HandleTypeDef *hdma)
 {
-  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  /* Derogation MISRAC2012-Rule-11.5 */
+  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
 
   /* Reset AbortCpltCallback */
   hpssi->hdmatx->XferAbortCallback = NULL;
@@ -1710,7 +1724,8 @@
   * @param  Tickstart Tick start value
   * @retval HAL status
   */
-static HAL_StatusTypeDef PSSI_WaitOnStatusUntilTimeout(PSSI_HandleTypeDef *hpssi, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef PSSI_WaitOnStatusUntilTimeout(PSSI_HandleTypeDef *hpssi, uint32_t Flag, FlagStatus Status,
+                                                       uint32_t Timeout, uint32_t Tickstart)
 {
   while ((HAL_PSSI_GET_STATUS(hpssi, Flag) & Flag) == (uint32_t)Status)
   {
@@ -1731,15 +1746,10 @@
   }
   return HAL_OK;
 }
-
-/**
-  * @brief DMA PSSI communication error callback
-  * @param hdma DMA handle.
-  * @retval None
-  */
 void PSSI_DMAError(DMA_HandleTypeDef *hdma)
 {
-  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  /* Derogation MISRAC2012-Rule-11.5 */
+  PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
 
   uint32_t tmperror;
 
@@ -1778,14 +1788,12 @@
 /**
   * @}
   */
-
+#endif /* PSSI */
 #endif /* HAL_PSSI_MODULE_ENABLED */
 /**
   * @}
   */
 
-#endif /* PSSI */
-
 /**
   * @}
   */
diff --git a/Src/stm32l4xx_hal_pwr.c b/Src/stm32l4xx_hal_pwr.c
index c0c0a82..8638eec 100644
--- a/Src/stm32l4xx_hal_pwr.c
+++ b/Src/stm32l4xx_hal_pwr.c
@@ -187,7 +187,7 @@
    =========================================
     [..]
       (+) Entry:
-          The Sleep mode / Low-power Sleep mode is entered thru HAL_PWR_EnterSLEEPMode() API
+          The Sleep mode / Low-power Sleep mode is entered through HAL_PWR_EnterSLEEPMode() API
           in specifying whether or not the regulator is forced to low-power mode and if exit is interrupt or event-triggered.
           (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode).
           (++) PWR_LOWPOWERREGULATOR_ON: Low-power sleep (regulator in low power mode).
@@ -209,7 +209,7 @@
    ===============================
     [..]
       (+) Entry:
-          The Stop 0, Stop 1 or Stop 2 modes are entered thru the following API's:
+          The Stop 0, Stop 1 or Stop 2 modes are entered through the following API's:
           (++) HAL_PWREx_EnterSTOP0Mode() for mode 0 or HAL_PWREx_EnterSTOP1Mode() for mode 1 or for porting reasons HAL_PWR_EnterSTOPMode().
           (++) HAL_PWREx_EnterSTOP2Mode() for mode 2.
       (+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only):
@@ -243,7 +243,7 @@
         and Standby circuitry.
 
       (++) Entry:
-          (+++) The Standby mode is entered thru HAL_PWR_EnterSTANDBYMode() API.
+          (+++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API.
                 SRAM1 and register contents are lost except for registers in the Backup domain and
                 Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register.
                 To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API
@@ -264,7 +264,7 @@
         SRAM and registers contents are lost except for backup domain registers.
 
       (+) Entry:
-          The Shutdown mode is entered thru HAL_PWREx_EnterSHUTDOWNMode() API.
+          The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API.
 
       (+) Exit:
           (++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event,
diff --git a/Src/stm32l4xx_hal_pwr_ex.c b/Src/stm32l4xx_hal_pwr_ex.c
index 37d7273..0b6eb2f 100644
--- a/Src/stm32l4xx_hal_pwr_ex.c
+++ b/Src/stm32l4xx_hal_pwr_ex.c
@@ -272,7 +272,7 @@
 
 /**
   * @brief Enable battery charging.
-  *        When VDD is present, charge the external battery on VBAT thru an internal resistor.
+  *        When VDD is present, charge the external battery on VBAT through an internal resistor.
   * @param  ResistorSelection specifies the resistor impedance.
   *          This parameter can be one of the following values:
   *            @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5     5 kOhms resistor
@@ -974,7 +974,7 @@
 
 
   /* Configure EXTI 35 to 38 interrupts if so required:
-     scan thru PVMType to detect which PVMx is set and
+     scan through PVMType to detect which PVMx is set and
      configure the corresponding EXTI line accordingly. */
   switch (sConfigPVM->PVMType)
   {
diff --git a/Src/stm32l4xx_hal_qspi.c b/Src/stm32l4xx_hal_qspi.c
index 55297a7..7b9838e 100644
--- a/Src/stm32l4xx_hal_qspi.c
+++ b/Src/stm32l4xx_hal_qspi.c
@@ -162,7 +162,7 @@
       and a pointer to the user callback function.
 
       Use function HAL_QSPI_UnRegisterCallback() to reset a callback to the default
-      weak (surcharged) function. It allows to reset following callbacks:
+      weak (overridden) function. It allows to reset following callbacks:
         (+) ErrorCallback : callback when error occurs.
         (+) AbortCpltCallback : callback when abort is completed.
         (+) FifoThresholdCallback : callback when the fifo threshold is reached.
@@ -178,9 +178,9 @@
       This function) takes as parameters the HAL peripheral handle and the Callback ID.
 
       By default, after the HAL_QSPI_Init and if the state is HAL_QSPI_STATE_RESET
-      all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+      all callbacks are reset to the corresponding legacy weak (overridden) functions.
       Exception done for MspInit and MspDeInit callbacks that are respectively
-      reset to the legacy weak (surcharged) functions in the HAL_QSPI_Init
+      reset to the legacy weak (overridden) functions in the HAL_QSPI_Init
       and  HAL_QSPI_DeInit only when these callbacks are null (not registered beforehand).
       If not, MspInit or MspDeInit are not null, the HAL_QSPI_Init and HAL_QSPI_DeInit
       keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
@@ -195,7 +195,7 @@
 
       When The compilation define USE_HAL_QSPI_REGISTER_CALLBACKS is set to 0 or
       not defined, the callback registering feature is not available
-      and weak (surcharged) callbacks are used.
+      and weak (overridden) callbacks are used.
 
     *** Workarounds linked to Silicon Limitation ***
     ====================================================
@@ -2009,7 +2009,7 @@
 #if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User QSPI Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used to override the weak predefined callback
   * @param hqspi QSPI handle
   * @param CallbackId ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -2123,7 +2123,7 @@
 
 /**
   * @brief  Unregister a User QSPI Callback
-  *         QSPI Callback is redirected to the weak (surcharged) predefined callback
+  *         QSPI Callback is redirected to the weak predefined callback
   * @param hqspi QSPI handle
   * @param CallbackId ID of the callback to be unregistered
   *        This parameter can be one of the following values:
diff --git a/Src/stm32l4xx_hal_rcc.c b/Src/stm32l4xx_hal_rcc.c
index 43312f1..e5a52f8 100644
--- a/Src/stm32l4xx_hal_rcc.c
+++ b/Src/stm32l4xx_hal_rcc.c
@@ -1320,7 +1320,7 @@
   *            @arg @ref RCC_MCO1SOURCE_SYSCLK  system  clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_MSI  MSI clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_HSI  HSI clock selected as MCO source
-  *            @arg @ref RCC_MCO1SOURCE_HSE  HSE clock selected as MCO sourcee
+  *            @arg @ref RCC_MCO1SOURCE_HSE  HSE clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_PLLCLK  main PLL clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_LSI  LSI clock selected as MCO source
   *            @arg @ref RCC_MCO1SOURCE_LSE  LSE clock selected as MCO source
diff --git a/Src/stm32l4xx_hal_rng.c b/Src/stm32l4xx_hal_rng.c
index 336a66f..70ec721 100644
--- a/Src/stm32l4xx_hal_rng.c
+++ b/Src/stm32l4xx_hal_rng.c
@@ -52,7 +52,7 @@
 
     [..]
     Use function HAL_RNG_UnRegisterCallback() to reset a callback to the default
-    weak (surcharged) function.
+    weak (overridden) function.
     HAL_RNG_UnRegisterCallback() takes as parameters the HAL peripheral handle,
     and the Callback ID.
     This function allows to reset following callbacks:
@@ -66,10 +66,10 @@
 
     [..]
     By default, after the HAL_RNG_Init() and when the state is HAL_RNG_STATE_RESET
-    all callbacks are set to the corresponding weak (surcharged) functions:
+    all callbacks are set to the corresponding weak (overridden) functions:
     example HAL_RNG_ErrorCallback().
     Exception done for MspInit and MspDeInit functions that are respectively
-    reset to the legacy weak (surcharged) functions in the HAL_RNG_Init()
+    reset to the legacy weak (overridden) functions in the HAL_RNG_Init()
     and HAL_RNG_DeInit() only when these callbacks are null (not registered beforehand).
     If not, MspInit or MspDeInit are not null, the HAL_RNG_Init() and HAL_RNG_DeInit()
     keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
@@ -80,13 +80,13 @@
     in HAL_RNG_STATE_READY or HAL_RNG_STATE_RESET state, thus registered (user)
     MspInit/DeInit callbacks can be used during the Init/DeInit.
     In that case first register the MspInit/MspDeInit user callbacks
-    using  HAL_RNG_RegisterCallback() before calling HAL_RNG_DeInit()
+    using HAL_RNG_RegisterCallback() before calling HAL_RNG_DeInit()
     or HAL_RNG_Init() function.
 
     [..]
     When The compilation define USE_HAL_RNG_REGISTER_CALLBACKS is set to 0 or
     not defined, the callback registration feature is not available
-    and weak (surcharged) callbacks are used.
+    and weak (overridden) callbacks are used.
 
   @endverbatim
   ******************************************************************************
@@ -110,6 +110,19 @@
 
 /* Private types -------------------------------------------------------------*/
 /* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_Private_Defines RNG Private Defines
+  * @{
+  */
+/*  Health test control register information to use in CCM algorithm */
+#define RNG_HTCFG_1   0x17590ABCU /*!< Magic number */
+#if defined(RNG_VER_3_1) || defined(RNG_VER_3_0)
+#define RNG_HTCFG     0x000CAA74U /*!< For best latency and to be compliant with NIST */
+#else /* RNG_VER_3_2 */
+#define RNG_HTCFG     0x00007274U /*!< For best latency and to be compliant with NIST */
+#endif /* RNG_VER_3_1 || RNG_VER_3_0 */
+/**
+  * @}
+  */
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
 /** @defgroup RNG_Private_Constants RNG Private Constants
@@ -121,7 +134,6 @@
   */
 /* Private macros ------------------------------------------------------------*/
 /* Private functions prototypes ----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
 /* Exported functions --------------------------------------------------------*/
 
 /** @addtogroup RNG_Exported_Functions
@@ -129,8 +141,8 @@
   */
 
 /** @addtogroup RNG_Exported_Functions_Group1
- *  @brief   Initialization and configuration functions
- *
+  *  @brief   Initialization and configuration functions
+  *
 @verbatim
  ===============================================================================
           ##### Initialization and configuration functions #####
@@ -167,7 +179,7 @@
   assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance));
 #if defined(RNG_CR_CED)
   assert_param(IS_RNG_CED(hrng->Init.ClockErrorDetection));
-#endif /* defined(RNG_CR_CED) */
+#endif /* RNG_CR_CED */
 
 #if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
   if (hrng->State == HAL_RNG_STATE_RESET)
@@ -205,16 +217,15 @@
   __HAL_RNG_DISABLE(hrng);
 
   /* RNG CR register configuration. Set value in CR register for CONFIG 1, CONFIG 2 and CONFIG 3 values */
-  cr_value = (uint32_t) (RNG_CR_CONFIG_VAL);
+  cr_value = (uint32_t)(RNG_CR_CONFIG_VAL);
 
-  /* Configuration of 
-     - Clock Error Detection 
+  /* Configuration of
+     - Clock Error Detection
      - CONFIG1, CONFIG2, CONFIG3 fields
      when CONDRT bit is set to 1 */
   MODIFY_REG(hrng->Instance->CR, RNG_CR_CED | RNG_CR_CONDRST | RNG_CR_RNG_CONFIG1
-                                 | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3,
-                                 (uint32_t) (RNG_CR_CONDRST | hrng->Init.ClockErrorDetection | cr_value));
-
+             | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3,
+             (uint32_t)(RNG_CR_CONDRST | hrng->Init.ClockErrorDetection | cr_value));
 #if defined(RNG_VER_3_2) || defined(RNG_VER_3_1) || defined(RNG_VER_3_0)
   /*!< magic number must be written immediately before to RNG_HTCRG */
   WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG_1);
@@ -222,16 +233,16 @@
   WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG);
 #endif /* RNG_VER_3_2 || RNG_VER_3_1 || RNG_VER_3_0 */
 
-  /* Writing bits CONDRST=0*/
+  /* Writing bit CONDRST=0 */
   CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST);
 
   /* Get tick */
   tickstart = HAL_GetTick();
 
   /* Wait for conditioning reset process to be completed */
-  while(HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
+  while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
   {
-    if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+    if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE)
     {
       /* New check to avoid false timeout detection in case of preemption */
       if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
@@ -246,8 +257,8 @@
 #if defined(RNG_CR_CED)
   /* Clock Error Detection Configuration */
   MODIFY_REG(hrng->Instance->CR, RNG_CR_CED, hrng->Init.ClockErrorDetection);
-#endif /* defined(RNG_CR_CED) */
-#endif /* end of RNG_CR_CONDRST */
+#endif /* RNG_CR_CED */
+#endif /* RNG_CR_CONDRST */
 
   /* Enable the RNG Peripheral */
   __HAL_RNG_ENABLE(hrng);
@@ -295,7 +306,8 @@
 {
 #if defined(RNG_CR_CONDRST)
   uint32_t tickstart;
-#endif
+
+#endif /* RNG_CR_CONDRST */
   /* Check the RNG handle allocation */
   if (hrng == NULL)
   {
@@ -306,16 +318,16 @@
   /* Clear Clock Error Detection bit when CONDRT bit is set to 1 */
   MODIFY_REG(hrng->Instance->CR, RNG_CR_CED | RNG_CR_CONDRST, RNG_CED_ENABLE | RNG_CR_CONDRST);
 
-  /* Writing bits CONDRST=0*/
+  /* Writing bit CONDRST=0 */
   CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST);
 
   /* Get tick */
   tickstart = HAL_GetTick();
 
   /* Wait for conditioning reset process to be completed */
-  while(HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
+  while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
   {
-    if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+    if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE)
     {
       /* New check to avoid false timeout detection in case of preemption */
       if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
@@ -328,6 +340,7 @@
       }
     }
   }
+
 #else
 #if defined(RNG_CR_CED)
   /* Clear Clock Error Detection bit */
@@ -409,7 +422,8 @@
   * @param  pCallback pointer to the Callback function
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+                                           pRNG_CallbackTypeDef pCallback)
 {
   HAL_StatusTypeDef status = HAL_OK;
 
@@ -419,51 +433,49 @@
     hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
     return HAL_ERROR;
   }
-  /* Process locked */
-  __HAL_LOCK(hrng);
 
   if (HAL_RNG_STATE_READY == hrng->State)
   {
     switch (CallbackID)
     {
-    case HAL_RNG_ERROR_CB_ID :
-      hrng->ErrorCallback = pCallback;
-      break;
+      case HAL_RNG_ERROR_CB_ID :
+        hrng->ErrorCallback = pCallback;
+        break;
 
-    case HAL_RNG_MSPINIT_CB_ID :
-      hrng->MspInitCallback = pCallback;
-      break;
+      case HAL_RNG_MSPINIT_CB_ID :
+        hrng->MspInitCallback = pCallback;
+        break;
 
-    case HAL_RNG_MSPDEINIT_CB_ID :
-      hrng->MspDeInitCallback = pCallback;
-      break;
+      case HAL_RNG_MSPDEINIT_CB_ID :
+        hrng->MspDeInitCallback = pCallback;
+        break;
 
-    default :
-      /* Update the error code */
-      hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
+      default :
+        /* Update the error code */
+        hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else if (HAL_RNG_STATE_RESET == hrng->State)
   {
     switch (CallbackID)
     {
-    case HAL_RNG_MSPINIT_CB_ID :
-      hrng->MspInitCallback = pCallback;
-      break;
+      case HAL_RNG_MSPINIT_CB_ID :
+        hrng->MspInitCallback = pCallback;
+        break;
 
-    case HAL_RNG_MSPDEINIT_CB_ID :
-      hrng->MspDeInitCallback = pCallback;
-      break;
+      case HAL_RNG_MSPDEINIT_CB_ID :
+        hrng->MspDeInitCallback = pCallback;
+        break;
 
-    default :
-      /* Update the error code */
-      hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
+      default :
+        /* Update the error code */
+        hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else
@@ -474,14 +486,12 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hrng);
   return status;
 }
 
 /**
   * @brief  Unregister an RNG Callback
-  *         RNG callabck is redirected to the weak predefined callback
+  *         RNG callback is redirected to the weak predefined callback
   * @param  hrng RNG handle
   * @param  CallbackID ID of the callback to be unregistered
   *         This parameter can be one of the following values:
@@ -494,51 +504,49 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hrng);
 
   if (HAL_RNG_STATE_READY == hrng->State)
   {
     switch (CallbackID)
     {
-    case HAL_RNG_ERROR_CB_ID :
-      hrng->ErrorCallback = HAL_RNG_ErrorCallback;          /* Legacy weak ErrorCallback  */
-      break;
+      case HAL_RNG_ERROR_CB_ID :
+        hrng->ErrorCallback = HAL_RNG_ErrorCallback;          /* Legacy weak ErrorCallback  */
+        break;
 
-    case HAL_RNG_MSPINIT_CB_ID :
-      hrng->MspInitCallback = HAL_RNG_MspInit;              /* Legacy weak MspInit  */
-      break;
+      case HAL_RNG_MSPINIT_CB_ID :
+        hrng->MspInitCallback = HAL_RNG_MspInit;              /* Legacy weak MspInit  */
+        break;
 
-    case HAL_RNG_MSPDEINIT_CB_ID :
-      hrng->MspDeInitCallback = HAL_RNG_MspDeInit;          /* Legacy weak MspDeInit  */
-      break;
+      case HAL_RNG_MSPDEINIT_CB_ID :
+        hrng->MspDeInitCallback = HAL_RNG_MspDeInit;          /* Legacy weak MspDeInit  */
+        break;
 
-    default :
-      /* Update the error code */
-      hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
+      default :
+        /* Update the error code */
+        hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else if (HAL_RNG_STATE_RESET == hrng->State)
   {
     switch (CallbackID)
     {
-    case HAL_RNG_MSPINIT_CB_ID :
-      hrng->MspInitCallback = HAL_RNG_MspInit;              /* Legacy weak MspInit  */
-      break;
+      case HAL_RNG_MSPINIT_CB_ID :
+        hrng->MspInitCallback = HAL_RNG_MspInit;              /* Legacy weak MspInit  */
+        break;
 
-    case HAL_RNG_MSPDEINIT_CB_ID :
-      hrng->MspDeInitCallback = HAL_RNG_MspDeInit;          /* Legacy weak MspInit  */
-      break;
+      case HAL_RNG_MSPDEINIT_CB_ID :
+        hrng->MspDeInitCallback = HAL_RNG_MspDeInit;          /* Legacy weak MspInit  */
+        break;
 
-    default :
-      /* Update the error code */
-      hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
+      default :
+        /* Update the error code */
+        hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
     }
   }
   else
@@ -549,8 +557,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hrng);
   return status;
 }
 
@@ -628,8 +634,8 @@
   */
 
 /** @addtogroup RNG_Exported_Functions_Group2
- *  @brief   Peripheral Control functions
- *
+  *  @brief   Peripheral Control functions
+  *
 @verbatim
  ===============================================================================
                       ##### Peripheral Control functions #####
@@ -647,16 +653,16 @@
   * @brief  Generates a 32-bit random number.
   * @note   When several random data are output at the same time in an output buffer,
   *         this function checks value of RNG_FLAG_DRDY flag to know if valid
-  *         random number is available in the DR register (RNG_FLAG_DRDY flag set 
+  *         random number is available in the DR register (RNG_FLAG_DRDY flag set
   *         whenever a random number is available through the RNG_DR register).
-  *         After transitioning from 0 to 1 (random number available), 
-  *         RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading 
-  *         four words from the RNG_DR register, i.e. further function calls 
+  *         After transitioning from 0 to 1 (random number available),
+  *         RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading
+  *         four words from the RNG_DR register, i.e. further function calls
   *         will immediately return a new u32 random number (additional words are
   *         available and can be read by the application, till RNG_FLAG_DRDY flag remains high).
   *         When no more random number data is available in DR register, RNG_FLAG_DRDY
   *         flag is automatically cleared.
-  *         When random number are out on a single sample basis, each time the random 
+  *         When random number are out on a single sample basis, each time the random
   *         number data is read the RNG_FLAG_DRDY flag is automatically cleared.
   * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
   *                the configuration information for RNG.
@@ -677,6 +683,20 @@
   {
     /* Change RNG peripheral state */
     hrng->State = HAL_RNG_STATE_BUSY;
+#if defined(RNG_CR_CONDRST)
+    /* Check if there is a seed error */
+    if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET)
+    {
+      /* Update the error code */
+      hrng->ErrorCode = HAL_RNG_ERROR_SEED;
+      /* Reset from seed error */
+      status = RNG_RecoverSeedError(hrng);
+      if (status == HAL_ERROR)
+      {
+        return status;
+      }
+    }
+#endif /* RNG_CR_CONDRST */
 
     /* Get tick */
     tickstart = HAL_GetTick();
@@ -686,18 +706,37 @@
     {
       if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE)
       {
-        hrng->State = HAL_RNG_STATE_READY;
-        hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrng);
-        return HAL_ERROR;
+        /* New check to avoid false timeout detection in case of preemption */
+        if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+        {
+          hrng->State = HAL_RNG_STATE_READY;
+          hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hrng);
+          return HAL_ERROR;
+        }
       }
     }
 
     /* Get a 32bit Random number */
     hrng->RandomNumber = hrng->Instance->DR;
+#if defined(RNG_CR_CONDRST)
+    /* In case of seed error, the value available in the RNG_DR register must not
+       be used as it may not have enough entropy */
+    if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET)
+    {
+      /* Update the error code and status */
+      hrng->ErrorCode = HAL_RNG_ERROR_SEED;
+      status = HAL_ERROR;
+    }
+    else /* No seed error */
+    {
+      *random32bit = hrng->RandomNumber;
+    }
+#else
     *random32bit = hrng->RandomNumber;
 
+#endif /* RNG_CR_CONDRST */
     hrng->State = HAL_RNG_STATE_READY;
   }
   else
@@ -755,7 +794,7 @@
   */
 uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
 {
-  if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+  if (HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
   {
     return hrng->RandomNumber;
   }
@@ -816,19 +855,32 @@
 void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
 {
   uint32_t rngclockerror = 0U;
+  uint32_t itflag   = hrng->Instance->SR;
 
   /* RNG clock error interrupt occurred */
-  if (__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET)
+  if ((itflag & RNG_IT_CEI) == RNG_IT_CEI)
   {
     /* Update the error code */
     hrng->ErrorCode = HAL_RNG_ERROR_CLOCK;
     rngclockerror = 1U;
   }
-  else if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET)
+  else if ((itflag & RNG_IT_SEI) == RNG_IT_SEI)
   {
-    /* Update the error code */
-    hrng->ErrorCode = HAL_RNG_ERROR_SEED;
-    rngclockerror = 1U;
+    /* Check if Seed Error Current Status (SECS) is set */
+    if ((itflag & RNG_FLAG_SECS) != RNG_FLAG_SECS)
+    {
+      /* RNG IP performed the reset automatically (auto-reset) */
+      /* Clear bit SEIS */
+      CLEAR_BIT(hrng->Instance->SR, RNG_IT_SEI);
+    }
+    else
+    {
+      /* Seed Error has not been recovered : Update the error code */
+      hrng->ErrorCode = HAL_RNG_ERROR_SEED;
+      rngclockerror = 1U;
+      /* Disable the IT */
+      __HAL_RNG_DISABLE_IT(hrng);
+    }
   }
   else
   {
@@ -850,10 +902,12 @@
 
     /* Clear the clock error flag */
     __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI);
+
+    return;
   }
 
   /* Check RNG data ready interrupt occurred */
-  if (__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
+  if ((itflag & RNG_IT_DRDY) == RNG_IT_DRDY)
   {
     /* Generate random number once, so disable the IT */
     __HAL_RNG_DISABLE_IT(hrng);
@@ -885,7 +939,7 @@
   *                the configuration information for RNG.
   * @retval random value
   */
-uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
+uint32_t HAL_RNG_ReadLastRandomNumber(const RNG_HandleTypeDef *hrng)
 {
   return (hrng->RandomNumber);
 }
@@ -896,7 +950,7 @@
   *         When RNG_FLAG_DRDY flag value is set, first random number has been read
   *         from DR register in IRQ Handler and is provided as callback parameter.
   *         Depending on valid data available in the conditioning output buffer,
-  *         additional words can be read by the application from DR register till 
+  *         additional words can be read by the application from DR register till
   *         DRDY bit remains high.
   * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
   *                the configuration information for RNG.
@@ -933,8 +987,8 @@
 
 
 /** @addtogroup RNG_Exported_Functions_Group3
- *  @brief   Peripheral State functions
- *
+  *  @brief   Peripheral State functions
+  *
 @verbatim
  ===============================================================================
                       ##### Peripheral State functions #####
@@ -953,17 +1007,17 @@
   *                the configuration information for RNG.
   * @retval HAL state
   */
-HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
+HAL_RNG_StateTypeDef HAL_RNG_GetState(const RNG_HandleTypeDef *hrng)
 {
   return hrng->State;
 }
 
 /**
   * @brief  Return the RNG handle error code.
-  * @param  hrng pointer to a RNG_HandleTypeDef structure.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure.
   * @retval RNG Error Code
-*/
-uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng)
+  */
+uint32_t HAL_RNG_GetError(const RNG_HandleTypeDef *hrng)
 {
   /* Return RNG Error Code */
   return hrng->ErrorCode;
@@ -975,6 +1029,94 @@
 /**
   * @}
   */
+#if defined(RNG_CR_CONDRST)
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup RNG_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  RNG sequence to recover from a seed error
+  * @param  hrng pointer to a RNG_HandleTypeDef structure.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RNG_RecoverSeedError(RNG_HandleTypeDef *hrng)
+{
+  __IO uint32_t count = 0U;
+
+  /*Check if seed error current status (SECS)is set */
+  if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_SECS) == RESET)
+  {
+    /* RNG performed the reset automatically (auto-reset) */
+    /* Clear bit SEIS */
+    CLEAR_BIT(hrng->Instance->SR, RNG_IT_SEI);
+  }
+  else  /* Sequence to fully recover from a seed error*/
+  {
+    /* Writing bit CONDRST=1*/
+    SET_BIT(hrng->Instance->CR, RNG_CR_CONDRST);
+    /* Writing bit CONDRST=0*/
+    CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST);
+
+    /* Wait for conditioning reset process to be completed */
+    count = RNG_TIMEOUT_VALUE;
+    do
+    {
+      count-- ;
+      if (count == 0U)
+      {
+        hrng->State = HAL_RNG_STATE_READY;
+        hrng->ErrorCode |= HAL_RNG_ERROR_TIMEOUT;
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrng);
+#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
+        /* Call registered Error callback */
+        hrng->ErrorCallback(hrng);
+#else
+        /* Call legacy weak Error callback */
+        HAL_RNG_ErrorCallback(hrng);
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
+        return HAL_ERROR;
+      }
+    } while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST));
+
+    if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET)
+    {
+      /* Clear bit SEIS */
+      CLEAR_BIT(hrng->Instance->SR, RNG_IT_SEI);
+    }
+
+    /* Wait for SECS to be cleared */
+    count = RNG_TIMEOUT_VALUE;
+    do
+    {
+      count-- ;
+      if (count == 0U)
+      {
+        hrng->State = HAL_RNG_STATE_READY;
+        hrng->ErrorCode |= HAL_RNG_ERROR_TIMEOUT;
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrng);
+#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
+        /* Call registered Error callback */
+        hrng->ErrorCallback(hrng);
+#else
+        /* Call legacy weak Error callback */
+        HAL_RNG_ErrorCallback(hrng);
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
+        return HAL_ERROR;
+      }
+    } while (HAL_IS_BIT_SET(hrng->Instance->SR, RNG_FLAG_SECS));
+  }
+  /* Update the error code */
+  hrng->ErrorCode &= ~ HAL_RNG_ERROR_SEED;
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+#endif /* RNG_CR_CONDRST */
 
 
 #endif /* HAL_RNG_MODULE_ENABLED */
@@ -987,3 +1129,4 @@
 /**
   * @}
   */
+
diff --git a/Src/stm32l4xx_hal_rng_ex.c b/Src/stm32l4xx_hal_rng_ex.c
index 8788784..d125c66 100644
--- a/Src/stm32l4xx_hal_rng_ex.c
+++ b/Src/stm32l4xx_hal_rng_ex.c
@@ -28,19 +28,17 @@
   * @{
   */
 
-#if defined (RNG)
+#if defined(RNG)
 
-/** @addtogroup RNGEx
+/** @addtogroup RNG_Ex
   * @brief RNG Extended HAL module driver.
   * @{
   */
 
 #ifdef HAL_RNG_MODULE_ENABLED
-#if defined (RNG_CR_CONDRST)
-
+#if defined(RNG_CR_CONDRST)
 /* Private types -------------------------------------------------------------*/
 /* Private defines -----------------------------------------------------------*/
-
 #if defined(RNG_VER_3_2) || defined(RNG_VER_3_1) || defined(RNG_VER_3_0)
 /** @addtogroup RNGEx_Private_Defines
   * @{
@@ -52,11 +50,10 @@
 /**
   * @}
   */
-#endif
-
+#endif /* RNG_VER_3_2 || RNG_VER_3_1 || RNG_VER_3_0 */
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
-/** @defgroup RNGEx_Private_Constants RNG Private Constants
+/** @addtogroup RNG_Ex_Private_Constants
   * @{
   */
 #define RNG_TIMEOUT_VALUE     2U
@@ -65,16 +62,16 @@
   */
 /* Private macros ------------------------------------------------------------*/
 /* Private functions prototypes ----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
+/* Private functions  --------------------------------------------------------*/
 /* Exported functions --------------------------------------------------------*/
 
-/** @addtogroup RNGEx_Exported_Functions
+/** @defgroup RNG_Ex_Exported_Functions RNG_Ex Exported Functions
   * @{
   */
 
-/** @addtogroup RNGEx_Exported_Functions_Group1
- *  @brief   Configuration functions
- *
+/** @defgroup RNG_Ex_Exported_Functions_Group1 Configuration and lock functions
+  *  @brief   Configuration functions
+  *
 @verbatim
  ===============================================================================
           ##### Configuration and lock functions #####
@@ -96,15 +93,15 @@
   *         the configuration information for RNG module
 
   * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf)
+  */
+HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, const RNG_ConfigTypeDef *pConf)
 {
   uint32_t tickstart;
   uint32_t cr_value;
   HAL_StatusTypeDef status ;
 
   /* Check the RNG handle allocation */
-  if ((hrng == NULL)||(pConf == NULL))
+  if ((hrng == NULL) || (pConf == NULL))
   {
     return HAL_ERROR;
   }
@@ -127,39 +124,43 @@
     __HAL_RNG_DISABLE(hrng);
 
     /* RNG CR register configuration. Set value in CR register for :
-      -	NIST Compliance setting
-      -	Clock divider value
-      -	CONFIG 1, CONFIG 2 and CONFIG 3 values */
+        - NIST Compliance setting
+        - Clock divider value
+        - CONFIG 1, CONFIG 2 and CONFIG 3 values */
 
-    cr_value = (uint32_t) ( pConf->ClockDivider | pConf->NistCompliance
-               | (pConf->Config1 << RNG_CR_RNG_CONFIG1_Pos)
-               | (pConf->Config2 << RNG_CR_RNG_CONFIG2_Pos)
-               | (pConf->Config3 << RNG_CR_RNG_CONFIG3_Pos));
+    cr_value = (uint32_t)(pConf->ClockDivider | pConf->NistCompliance
+                          | (pConf->Config1 << RNG_CR_RNG_CONFIG1_Pos)
+                          | (pConf->Config2 << RNG_CR_RNG_CONFIG2_Pos)
+                          | (pConf->Config3 << RNG_CR_RNG_CONFIG3_Pos));
 
     MODIFY_REG(hrng->Instance->CR, RNG_CR_NISTC | RNG_CR_CLKDIV | RNG_CR_RNG_CONFIG1
-                                   | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3,
-                                   (uint32_t) (RNG_CR_CONDRST | cr_value));
+               | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3,
+               (uint32_t)(RNG_CR_CONDRST | cr_value));
 
 #if defined(RNG_VER_3_2) || defined(RNG_VER_3_1) || defined(RNG_VER_3_0)
     /*!< magic number must be written immediately before to RNG_HTCRG */
     WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG_1);
     /* for best latency and to be compliant with NIST */
     WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG);
-#endif
+#endif /* RNG_VER_3_2 || RNG_VER_3_1 || RNG_VER_3_0 */
 
-    /* Writing bits CONDRST=0*/
+    /* Writing bit CONDRST=0*/
     CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST);
     /* Get tick */
     tickstart = HAL_GetTick();
 
     /* Wait for conditioning reset process to be completed */
-    while(HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
+    while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
     {
-      if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+      if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE)
       {
-        hrng->State = HAL_RNG_STATE_READY;
-        hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
-        return HAL_ERROR;
+        /* New check to avoid false timeout detection in case of prememption */
+        if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
+        {
+          hrng->State = HAL_RNG_STATE_READY;
+          hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
+          return HAL_ERROR;
+        }
       }
     }
 
@@ -191,14 +192,14 @@
   *         the configuration information for RNG module
 
   * @retval HAL status
-*/
+  */
 HAL_StatusTypeDef HAL_RNGEx_GetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf)
 {
 
   HAL_StatusTypeDef status ;
 
   /* Check the RNG handle allocation */
-  if ((hrng == NULL)||(pConf == NULL))
+  if ((hrng == NULL) || (pConf == NULL))
   {
     return HAL_ERROR;
   }
@@ -210,8 +211,8 @@
     hrng->State = HAL_RNG_STATE_BUSY;
 
     /* Get  RNG parameters  */
-    pConf->Config1        = (uint32_t) ((hrng->Instance->CR & RNG_CR_RNG_CONFIG1) >> RNG_CR_RNG_CONFIG1_Pos) ;
-    pConf->Config2        = (uint32_t) ((hrng->Instance->CR & RNG_CR_RNG_CONFIG2) >> RNG_CR_RNG_CONFIG2_Pos);
+    pConf->Config1        = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG1) >> RNG_CR_RNG_CONFIG1_Pos) ;
+    pConf->Config2        = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG2) >> RNG_CR_RNG_CONFIG2_Pos);
     pConf->Config3        = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG3) >> RNG_CR_RNG_CONFIG3_Pos);
     pConf->ClockDivider   = (hrng->Instance->CR & RNG_CR_CLKDIV);
     pConf->NistCompliance = (hrng->Instance->CR & RNG_CR_NISTC);
@@ -240,7 +241,7 @@
   * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
   *                the configuration information for RNG.
   * @retval HAL status
-*/
+  */
 HAL_StatusTypeDef HAL_RNGEx_LockConfig(RNG_HandleTypeDef *hrng)
 {
   HAL_StatusTypeDef status;
@@ -252,7 +253,7 @@
   }
 
   /* Check RNG peripheral state */
-  if(hrng->State == HAL_RNG_STATE_READY)
+  if (hrng->State == HAL_RNG_STATE_READY)
   {
     /* Change RNG peripheral state */
     hrng->State = HAL_RNG_STATE_BUSY;
@@ -281,11 +282,63 @@
   * @}
   */
 
+/** @defgroup RNG_Ex_Exported_Functions_Group2 Recover from seed error function
+  *  @brief   Recover from seed error function
+  *
+@verbatim
+ ===============================================================================
+          ##### Recover from seed error function #####
+ ===============================================================================
+    [..]  This section provide function allowing to:
+      (+) Recover from a seed error
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  RNG sequence to recover from a seed error
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNGEx_RecoverSeedError(RNG_HandleTypeDef *hrng)
+{
+  HAL_StatusTypeDef status;
+
+  /* Check the RNG handle allocation */
+  if (hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check RNG peripheral state */
+  if (hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */
+    hrng->State = HAL_RNG_STATE_BUSY;
+
+    /* sequence to fully recover from a seed error */
+    status = RNG_RecoverSeedError(hrng);
+  }
+  else
+  {
+    hrng->ErrorCode = HAL_RNG_ERROR_BUSY;
+    status = HAL_ERROR;
+  }
+
+  /* Return the function status */
+  return status;
+}
+
 /**
   * @}
   */
 
-#endif  /* CONDRST */
+/**
+  * @}
+  */
+
+#endif /* RNG_CR_CONDRST */
 #endif /* HAL_RNG_MODULE_ENABLED */
 /**
   * @}
@@ -296,3 +349,4 @@
 /**
   * @}
   */
+
diff --git a/Src/stm32l4xx_hal_rtc.c b/Src/stm32l4xx_hal_rtc.c
index 666fe93..585c956 100644
--- a/Src/stm32l4xx_hal_rtc.c
+++ b/Src/stm32l4xx_hal_rtc.c
@@ -2504,11 +2504,15 @@
 {
   uint32_t tickstart;
 
-  /* Clear RSF flag */
-#if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx)
+#if defined(STM32L412xx) || defined(STM32L422xx)
+  /* Clear RSF flag, keep reserved bits at reset values (setting other flags has no effect) */
+  hrtc->Instance->ICSR = ((uint32_t)(RTC_RSF_MASK & RTC_ICSR_RESERVED_MASK));
+#elif defined (STM32L4P5xx) || defined (STM32L4Q5xx)
+  /* Clear RSF flag (use a read-modify-write sequence to preserve the other read-write bits) */
   hrtc->Instance->ICSR &= (uint32_t)RTC_RSF_MASK;
 #else
-  hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+  /* Clear RSF flag, keep reserved bits at reset values (setting other flags has no effect) */
+  hrtc->Instance->ISR = ((uint32_t)(RTC_RSF_MASK & RTC_ISR_RESERVED_MASK));
 #endif
 
   tickstart = HAL_GetTick();
diff --git a/Src/stm32l4xx_hal_sai.c b/Src/stm32l4xx_hal_sai.c
index 46f9abb..eca1eca 100644
--- a/Src/stm32l4xx_hal_sai.c
+++ b/Src/stm32l4xx_hal_sai.c
@@ -244,6 +244,8 @@
   */
 #define SAI_DEFAULT_TIMEOUT      4U
 #define SAI_LONG_TIMEOUT         1000U
+#define SAI_SPDIF_FRAME_LENGTH   64U
+#define SAI_AC97_FRAME_LENGTH    256U
 /**
   * @}
   */
@@ -568,12 +570,12 @@
       if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL)
       {
         /* For SPDIF protocol, frame length is set by hardware to 64 */
-        tmpframelength = 64U;
+        tmpframelength = SAI_SPDIF_FRAME_LENGTH;
       }
       else if (hsai->Init.Protocol == SAI_AC97_PROTOCOL)
       {
         /* For AC97 protocol, frame length is set by hardware to 256 */
-        tmpframelength = 256U;
+        tmpframelength = SAI_AC97_FRAME_LENGTH;
       }
       else
       {
diff --git a/Src/stm32l4xx_hal_sd.c b/Src/stm32l4xx_hal_sd.c
index c818215..6262126 100644
--- a/Src/stm32l4xx_hal_sd.c
+++ b/Src/stm32l4xx_hal_sd.c
@@ -320,7 +320,6 @@
 static void     SD_DMATxAbort     (DMA_HandleTypeDef *hdma);
 static void     SD_DMARxAbort     (DMA_HandleTypeDef *hdma);
 #else
-uint32_t        SD_HighSpeed      (SD_HandleTypeDef *hsd);
 static uint32_t SD_UltraHighSpeed (SD_HandleTypeDef *hsd);
 static uint32_t SD_DDR_Mode       (SD_HandleTypeDef *hsd);
 #endif /* !STM32L4P5xx && !STM32L4Q5xx && !STM32L4R5xx && !STM32L4R7xx && !STM32L4R9xx && !STM32L4S5xx && !STM32L4S7xx && !STM32L4S9xx */
diff --git a/Src/stm32l4xx_hal_sd_ex.c b/Src/stm32l4xx_hal_sd_ex.c
index 3bf2ff4..8308b65 100644
--- a/Src/stm32l4xx_hal_sd_ex.c
+++ b/Src/stm32l4xx_hal_sd_ex.c
@@ -54,7 +54,6 @@
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
-extern uint32_t SD_HighSpeed(SD_HandleTypeDef *hsd);
 /* Exported functions --------------------------------------------------------*/
 /** @addtogroup SDEx_Exported_Functions
   * @{
diff --git a/Src/stm32l4xx_hal_smartcard.c b/Src/stm32l4xx_hal_smartcard.c
index ab5eedd..f871a47 100644
--- a/Src/stm32l4xx_hal_smartcard.c
+++ b/Src/stm32l4xx_hal_smartcard.c
@@ -136,7 +136,7 @@
 
     [..]
     Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default
-    weak (surcharged) function.
+    weak function.
     HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle,
     and the Callback ID.
     This function allows to reset following callbacks:
@@ -153,10 +153,10 @@
 
     [..]
     By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET
-    all callbacks are set to the corresponding weak (surcharged) functions:
+    all callbacks are set to the corresponding weak functions:
     examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback().
     Exception done for MspInit and MspDeInit functions that are respectively
-    reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init()
+    reset to the legacy weak functions in the HAL_SMARTCARD_Init()
     and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand).
     If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit()
     keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
@@ -173,7 +173,7 @@
     [..]
     When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or
     not defined, the callback registration feature is not available
-    and weak (surcharged) callbacks are used.
+    and weak callbacks are used.
 
 
   @endverbatim
@@ -207,7 +207,7 @@
                                       USART_CR1_FIFOEN))  /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
 #else
 #define USART_CR1_FIELDS  ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
-                                        USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
+                                      USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
 #endif /* USART_CR1_FIFOEN */
 
 #define USART_CR2_CLK_FIELDS  ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \
@@ -481,7 +481,7 @@
 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User SMARTCARD Callback
-  *         To be used instead of the weak predefined callback
+  *         To be used to override the weak predefined callback
   * @note   The HAL_SMARTCARD_RegisterCallback() may be called before HAL_SMARTCARD_Init()
   *         in HAL_SMARTCARD_STATE_RESET to register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID
   *         and HAL_SMARTCARD_MSPDEINIT_CB_ID
diff --git a/Src/stm32l4xx_hal_smbus.c b/Src/stm32l4xx_hal_smbus.c
index 39cb22c..ec68cb2 100644
--- a/Src/stm32l4xx_hal_smbus.c
+++ b/Src/stm32l4xx_hal_smbus.c
@@ -584,6 +584,9 @@
 /**
   * @brief  Register a User SMBUS Callback
   *         To be used instead of the weak predefined callback
+  * @note   The HAL_SMBUS_RegisterCallback() may be called before HAL_SMBUS_Init() in
+  *         HAL_SMBUS_STATE_RESET to register callbacks for HAL_SMBUS_MSPINIT_CB_ID and
+  *         HAL_SMBUS_MSPDEINIT_CB_ID.
   * @param  hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains
   *                the configuration information for the specified SMBUS.
   * @param  CallbackID ID of the callback to be registered
@@ -613,9 +616,6 @@
     return HAL_ERROR;
   }
 
-  /* Process locked */
-  __HAL_LOCK(hsmbus);
-
   if (HAL_SMBUS_STATE_READY == hsmbus->State)
   {
     switch (CallbackID)
@@ -691,14 +691,15 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hsmbus);
   return status;
 }
 
 /**
   * @brief  Unregister an SMBUS Callback
   *         SMBUS callback is redirected to the weak predefined callback
+  * @note   The HAL_SMBUS_UnRegisterCallback() may be called before HAL_SMBUS_Init() in
+  *         HAL_SMBUS_STATE_RESET to un-register callbacks for HAL_SMBUS_MSPINIT_CB_ID and
+  *         HAL_SMBUS_MSPDEINIT_CB_ID
   * @param  hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains
   *                the configuration information for the specified SMBUS.
   * @param  CallbackID ID of the callback to be unregistered
@@ -719,9 +720,6 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hsmbus);
-
   if (HAL_SMBUS_STATE_READY == hsmbus->State)
   {
     switch (CallbackID)
@@ -797,8 +795,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hsmbus);
   return status;
 }
 
@@ -822,8 +818,6 @@
 
     return HAL_ERROR;
   }
-  /* Process locked */
-  __HAL_LOCK(hsmbus);
 
   if (HAL_SMBUS_STATE_READY == hsmbus->State)
   {
@@ -838,8 +832,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hsmbus);
   return status;
 }
 
@@ -854,9 +846,6 @@
 {
   HAL_StatusTypeDef status = HAL_OK;
 
-  /* Process locked */
-  __HAL_LOCK(hsmbus);
-
   if (HAL_SMBUS_STATE_READY == hsmbus->State)
   {
     hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback  */
@@ -870,8 +859,6 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hsmbus);
   return status;
 }
 
@@ -939,7 +926,7 @@
                                                uint8_t *pData, uint16_t Size, uint32_t XferOptions)
 {
   uint32_t tmp;
-  uint32_t sizetoxfer = 0U;
+  uint32_t sizetoxfer;
 
   /* Check the parameters */
   assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -973,20 +960,27 @@
     }
 
     sizetoxfer = hsmbus->XferSize;
-    if ((hsmbus->XferSize > 0U) && ((XferOptions == SMBUS_FIRST_FRAME) ||
-                                    (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) ||
-                                    (XferOptions == SMBUS_FIRST_FRAME_WITH_PEC) ||
-                                    (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC)))
+    if ((sizetoxfer > 0U) && ((XferOptions == SMBUS_FIRST_FRAME) ||
+                              (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) ||
+                              (XferOptions == SMBUS_FIRST_FRAME_WITH_PEC) ||
+                              (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC)))
     {
-      /* Preload TX register */
-      /* Write data to TXDR */
-      hsmbus->Instance->TXDR = *hsmbus->pBuffPtr;
+      if (hsmbus->pBuffPtr != NULL)
+      {
+        /* Preload TX register */
+        /* Write data to TXDR */
+        hsmbus->Instance->TXDR = *hsmbus->pBuffPtr;
 
-      /* Increment Buffer pointer */
-      hsmbus->pBuffPtr++;
+        /* Increment Buffer pointer */
+        hsmbus->pBuffPtr++;
 
-      hsmbus->XferCount--;
-      hsmbus->XferSize--;
+        hsmbus->XferCount--;
+        hsmbus->XferSize--;
+      }
+      else
+      {
+        return HAL_ERROR;
+      }
     }
 
     /* Send Slave Address */
@@ -1027,8 +1021,15 @@
       /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
       if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL)
       {
-        hsmbus->XferSize--;
-        hsmbus->XferCount--;
+        if (hsmbus->XferSize > 0U)
+        {
+          hsmbus->XferSize--;
+          hsmbus->XferCount--;
+        }
+        else
+        {
+          return HAL_ERROR;
+        }
       }
     }
 
@@ -1844,7 +1845,7 @@
   *                the configuration information for the specified SMBUS.
   * @retval HAL state
   */
-uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus)
+uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus)
 {
   /* Return SMBUS handle state */
   return hsmbus->State;
@@ -1856,7 +1857,7 @@
   *              the configuration information for the specified SMBUS.
   * @retval SMBUS Error Code
   */
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus)
+uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus)
 {
   return hsmbus->ErrorCode;
 }
diff --git a/Src/stm32l4xx_hal_spi.c b/Src/stm32l4xx_hal_spi.c
index 0019bfd..5c5efd6 100644
--- a/Src/stm32l4xx_hal_spi.c
+++ b/Src/stm32l4xx_hal_spi.c
@@ -1359,6 +1359,20 @@
       hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
       hspi->pTxBuffPtr += sizeof(uint16_t);
       hspi->TxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+      /* Enable CRC Transmission */
+      if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+      {
+        /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */
+        if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP))
+        {
+          SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM);
+        }
+        SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+      }
+#endif /* USE_SPI_CRC */
+
     }
     while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
     {
@@ -1418,6 +1432,19 @@
         *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
         hspi->pTxBuffPtr++;
         hspi->TxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+        /* Enable CRC Transmission */
+        if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+        {
+          /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */
+          if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP))
+          {
+            SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM);
+          }
+          SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+        }
+#endif /* USE_SPI_CRC */
       }
     }
     while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
@@ -1579,8 +1606,6 @@
   /* Check Direction parameter */
   assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
 
-  /* Process Locked */
-  __HAL_LOCK(hspi);
 
   if ((pData == NULL) || (Size == 0U))
   {
@@ -1594,6 +1619,9 @@
     goto error;
   }
 
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
   /* Set the transaction information */
   hspi->State       = HAL_SPI_STATE_BUSY_TX;
   hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
@@ -1633,10 +1661,6 @@
   }
 #endif /* USE_SPI_CRC */
 
-  /* Enable TXE and ERR interrupt */
-  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
-
-
   /* Check if the SPI is already enabled */
   if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
   {
@@ -1644,8 +1668,12 @@
     __HAL_SPI_ENABLE(hspi);
   }
 
-error :
+  /* Process Unlocked */
   __HAL_UNLOCK(hspi);
+  /* Enable TXE and ERR interrupt */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+error :
   return errorcode;
 }
 
@@ -1675,8 +1703,6 @@
     return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
   }
 
-  /* Process Locked */
-  __HAL_LOCK(hspi);
 
   if ((pData == NULL) || (Size == 0U))
   {
@@ -1684,6 +1710,9 @@
     goto error;
   }
 
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
   /* Set the transaction information */
   hspi->State       = HAL_SPI_STATE_BUSY_RX;
   hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
@@ -1736,9 +1765,6 @@
   }
 #endif /* USE_SPI_CRC */
 
-  /* Enable TXE and ERR interrupt */
-  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
-
   /* Note : The SPI must be enabled after unlocking current process
             to avoid the risk of SPI interrupt handle execution before current
             process unlock */
@@ -1750,9 +1776,12 @@
     __HAL_SPI_ENABLE(hspi);
   }
 
-error :
   /* Process Unlocked */
   __HAL_UNLOCK(hspi);
+  /* Enable RXNE and ERR interrupt */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+error :
   return errorcode;
 }
 
@@ -1774,9 +1803,6 @@
   /* Check Direction parameter */
   assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
 
-  /* Process locked */
-  __HAL_LOCK(hspi);
-
   /* Init temporary variables */
   tmp_state           = hspi->State;
   tmp_mode            = hspi->Init.Mode;
@@ -1794,6 +1820,9 @@
     goto error;
   }
 
+  /* Process locked */
+  __HAL_LOCK(hspi);
+
   /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
   if (hspi->State != HAL_SPI_STATE_BUSY_RX)
   {
@@ -1850,8 +1879,6 @@
     SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
   }
 
-  /* Enable TXE, RXNE and ERR interrupt */
-  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
 
   /* Check if the SPI is already enabled */
   if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
@@ -1860,9 +1887,12 @@
     __HAL_SPI_ENABLE(hspi);
   }
 
-error :
   /* Process Unlocked */
   __HAL_UNLOCK(hspi);
+  /* Enable TXE, RXNE and ERR interrupt */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+error :
   return errorcode;
 }
 
@@ -2004,13 +2034,13 @@
 
   /* Check rx dma handle */
   assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx));
-  
+
   if (hspi->State != HAL_SPI_STATE_READY)
   {
     errorcode = HAL_BUSY;
     goto error;
   }
-  
+
   if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
   {
     hspi->State = HAL_SPI_STATE_BUSY_RX;
diff --git a/Src/stm32l4xx_hal_sram.c b/Src/stm32l4xx_hal_sram.c
index 2a0ffbe..81bf276 100644
--- a/Src/stm32l4xx_hal_sram.c
+++ b/Src/stm32l4xx_hal_sram.c
@@ -83,15 +83,15 @@
       and a pointer to the user callback function.
 
       Use function HAL_SRAM_UnRegisterCallback() to reset a callback to the default
-      weak (surcharged) function. It allows to reset following callbacks:
+      weak (overridden) function. It allows to reset following callbacks:
         (+) MspInitCallback    : SRAM MspInit.
         (+) MspDeInitCallback  : SRAM MspDeInit.
       This function) takes as parameters the HAL peripheral handle and the Callback ID.
 
       By default, after the HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET
-      all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+      all callbacks are reset to the corresponding legacy weak (overridden) functions.
       Exception done for MspInit and MspDeInit callbacks that are respectively
-      reset to the legacy weak (surcharged) functions in the HAL_SRAM_Init
+      reset to the legacy weak (overridden) functions in the HAL_SRAM_Init
       and  HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand).
       If not, MspInit or MspDeInit are not null, the HAL_SRAM_Init and HAL_SRAM_DeInit
       keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
@@ -106,7 +106,7 @@
 
       When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or
       not defined, the callback registering feature is not available
-      and weak (surcharged) callbacks are used.
+      and weak (overridden) callbacks are used.
 
   @endverbatim
   ******************************************************************************
@@ -133,9 +133,15 @@
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SRAM_Private_Functions SRAM Private Functions
+  * @{
+  */
 static void SRAM_DMACplt(DMA_HandleTypeDef *hdma);
 static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma);
 static void SRAM_DMAError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
 
 /* Exported functions --------------------------------------------------------*/
 
@@ -731,7 +737,7 @@
 #if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User SRAM Callback
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used to override the weak predefined callback
   * @param hsram : SRAM handle
   * @param CallbackId : ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -751,9 +757,6 @@
     return HAL_ERROR;
   }
 
-  /* Process locked */
-  __HAL_LOCK(hsram);
-
   state = hsram->State;
   if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_RESET) || (state == HAL_SRAM_STATE_PROTECTED))
   {
@@ -777,14 +780,12 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hsram);
   return status;
 }
 
 /**
   * @brief  Unregister a User SRAM Callback
-  *         SRAM Callback is redirected to the weak (surcharged) predefined callback
+  *         SRAM Callback is redirected to the weak predefined callback
   * @param hsram : SRAM handle
   * @param CallbackId : ID of the callback to be unregistered
   *        This parameter can be one of the following values:
@@ -799,9 +800,6 @@
   HAL_StatusTypeDef status = HAL_OK;
   HAL_SRAM_StateTypeDef state;
 
-  /* Process locked */
-  __HAL_LOCK(hsram);
-
   state = hsram->State;
   if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))
   {
@@ -847,14 +845,12 @@
     status =  HAL_ERROR;
   }
 
-  /* Release Lock */
-  __HAL_UNLOCK(hsram);
   return status;
 }
 
 /**
   * @brief  Register a User SRAM Callback for DMA transfers
-  *         To be used instead of the weak (surcharged) predefined callback
+  *         To be used to override the weak predefined callback
   * @param hsram : SRAM handle
   * @param CallbackId : ID of the callback to be registered
   *        This parameter can be one of the following values:
@@ -1018,7 +1014,7 @@
   *                the configuration information for SRAM module.
   * @retval HAL state
   */
-HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram)
 {
   return hsram->State;
 }
@@ -1031,6 +1027,10 @@
   * @}
   */
 
+/** @addtogroup SRAM_Private_Functions SRAM Private Functions
+  * @{
+  */
+
 /**
   * @brief  DMA SRAM process complete callback.
   * @param  hdma : DMA handle
@@ -1101,6 +1101,10 @@
   * @}
   */
 
+/**
+  * @}
+  */
+
 #endif /* HAL_SRAM_MODULE_ENABLED */
 
 /**
diff --git a/Src/stm32l4xx_hal_swpmi.c b/Src/stm32l4xx_hal_swpmi.c
index 5de228d..3cbd22d 100644
--- a/Src/stm32l4xx_hal_swpmi.c
+++ b/Src/stm32l4xx_hal_swpmi.c
@@ -642,12 +642,12 @@
   * @param  Timeout Timeout duration
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, const uint32_t *pData, uint16_t Size, uint32_t Timeout)
 {
   uint32_t tickstart = HAL_GetTick();
   HAL_StatusTypeDef status = HAL_OK;
   HAL_SWPMI_StateTypeDef tmp_state;
-  uint32_t *ptmp_data;
+  const uint32_t *ptmp_data;
   uint32_t tmp_size;
 
   if ((pData == NULL) || (Size == 0U))
@@ -859,7 +859,7 @@
   * @param  Size Amount of data to be sent
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, const uint32_t *pData, uint16_t Size)
 {
   HAL_StatusTypeDef status = HAL_OK;
   HAL_SWPMI_StateTypeDef tmp_state;
@@ -989,7 +989,7 @@
   * @param  Size Amount of data to be sent
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, const uint32_t *pData, uint16_t Size)
 {
   HAL_StatusTypeDef status = HAL_OK;
   HAL_SWPMI_StateTypeDef tmp_state;
@@ -1546,7 +1546,7 @@
   * @param hswpmi SWPMI handle
   * @retval HAL state
   */
-HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(SWPMI_HandleTypeDef *hswpmi)
+HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(const SWPMI_HandleTypeDef *hswpmi)
 {
   /* Return SWPMI handle state */
   return hswpmi->State;
@@ -1558,7 +1558,7 @@
   *              the configuration information for the specified SWPMI.
 * @retval SWPMI Error Code
 */
-uint32_t HAL_SWPMI_GetError(SWPMI_HandleTypeDef *hswpmi)
+uint32_t HAL_SWPMI_GetError(const SWPMI_HandleTypeDef *hswpmi)
 {
   return hswpmi->ErrorCode;
 }
diff --git a/Src/stm32l4xx_hal_tim.c b/Src/stm32l4xx_hal_tim.c
index 037f2d9..f302ed1 100644
--- a/Src/stm32l4xx_hal_tim.c
+++ b/Src/stm32l4xx_hal_tim.c
@@ -888,7 +888,7 @@
   uint32_t tmpsmcr;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Check the TIM channel state */
   if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
@@ -980,7 +980,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   switch (Channel)
   {
@@ -1059,7 +1059,7 @@
   uint32_t tmpsmcr;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Set the TIM channel state */
   if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
@@ -1221,7 +1221,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   switch (Channel)
   {
@@ -1557,7 +1557,7 @@
   uint32_t tmpsmcr;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Check the TIM channel state */
   if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
@@ -1649,7 +1649,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   switch (Channel)
   {
@@ -1728,7 +1728,7 @@
   uint32_t tmpsmcr;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Set the TIM channel state */
   if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
@@ -1889,7 +1889,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   switch (Channel)
   {
@@ -2133,7 +2133,7 @@
   HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Check the TIM channel state */
   if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
@@ -2181,7 +2181,7 @@
 HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
 {
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Disable the Input Capture channel */
   TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
@@ -2217,7 +2217,7 @@
   HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   /* Check the TIM channel state */
   if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
@@ -2305,7 +2305,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
 
   switch (Channel)
   {
@@ -2381,7 +2381,7 @@
   HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
   assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
 
   /* Set the TIM channel state */
@@ -2536,7 +2536,7 @@
   HAL_StatusTypeDef status = HAL_OK;
 
   /* Check the parameters */
-  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
   assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
 
   /* Disable the Input Capture channel */
@@ -3027,7 +3027,7 @@
   * @param  sConfig TIM Encoder Interface configuration structure
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef *sConfig)
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig)
 {
   uint32_t tmpsmcr;
   uint32_t tmpccmr1;
@@ -3833,10 +3833,13 @@
   */
 void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
 {
+  uint32_t itsource = htim->Instance->DIER;
+  uint32_t itflag   = htim->Instance->SR;
+
   /* Capture compare 1 event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+  if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET)
+    if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1))
     {
       {
         __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
@@ -3867,9 +3870,9 @@
     }
   }
   /* Capture compare 2 event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+  if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET)
+    if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
       htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
@@ -3897,9 +3900,9 @@
     }
   }
   /* Capture compare 3 event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+  if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET)
+    if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
       htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
@@ -3927,9 +3930,9 @@
     }
   }
   /* Capture compare 4 event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+  if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET)
+    if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
       htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
@@ -3957,9 +3960,9 @@
     }
   }
   /* TIM Update event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+  if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET)
+    if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
@@ -3970,9 +3973,9 @@
     }
   }
   /* TIM Break input event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+  if ((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET)
+    if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
@@ -3983,9 +3986,9 @@
     }
   }
   /* TIM Break2 input event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET)
+  if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET)
+    if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK))
     {
       __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2);
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
@@ -3996,9 +3999,9 @@
     }
   }
   /* TIM Trigger detection event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+  if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET)
+    if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
@@ -4009,9 +4012,9 @@
     }
   }
   /* TIM commutation event */
-  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+  if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM))
   {
-    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET)
+    if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM))
     {
       __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
@@ -6981,11 +6984,12 @@
   uint32_t tmpccer;
   uint32_t tmpcr2;
 
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+
   /* Disable the Channel 1: Reset the CC1E Bit */
   TIMx->CCER &= ~TIM_CCER_CC1E;
 
-  /* Get the TIMx CCER register value */
-  tmpccer = TIMx->CCER;
   /* Get the TIMx CR2 register value */
   tmpcr2 =  TIMx->CR2;
 
@@ -7056,11 +7060,12 @@
   uint32_t tmpccer;
   uint32_t tmpcr2;
 
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+
   /* Disable the Channel 2: Reset the CC2E Bit */
   TIMx->CCER &= ~TIM_CCER_CC2E;
 
-  /* Get the TIMx CCER register value */
-  tmpccer = TIMx->CCER;
   /* Get the TIMx CR2 register value */
   tmpcr2 =  TIMx->CR2;
 
@@ -7132,11 +7137,12 @@
   uint32_t tmpccer;
   uint32_t tmpcr2;
 
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+
   /* Disable the Channel 3: Reset the CC2E Bit */
   TIMx->CCER &= ~TIM_CCER_CC3E;
 
-  /* Get the TIMx CCER register value */
-  tmpccer = TIMx->CCER;
   /* Get the TIMx CR2 register value */
   tmpcr2 =  TIMx->CR2;
 
@@ -7206,11 +7212,12 @@
   uint32_t tmpccer;
   uint32_t tmpcr2;
 
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+
   /* Disable the Channel 4: Reset the CC4E Bit */
   TIMx->CCER &= ~TIM_CCER_CC4E;
 
-  /* Get the TIMx CCER register value */
-  tmpccer = TIMx->CCER;
   /* Get the TIMx CR2 register value */
   tmpcr2 =  TIMx->CR2;
 
@@ -7267,11 +7274,12 @@
   uint32_t tmpccer;
   uint32_t tmpcr2;
 
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+
   /* Disable the output: Reset the CCxE Bit */
   TIMx->CCER &= ~TIM_CCER_CC5E;
 
-  /* Get the TIMx CCER register value */
-  tmpccer = TIMx->CCER;
   /* Get the TIMx CR2 register value */
   tmpcr2 =  TIMx->CR2;
   /* Get the TIMx CCMR1 register value */
@@ -7320,11 +7328,12 @@
   uint32_t tmpccer;
   uint32_t tmpcr2;
 
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+
   /* Disable the output: Reset the CCxE Bit */
   TIMx->CCER &= ~TIM_CCER_CC6E;
 
-  /* Get the TIMx CCER register value */
-  tmpccer = TIMx->CCER;
   /* Get the TIMx CR2 register value */
   tmpcr2 =  TIMx->CR2;
   /* Get the TIMx CCMR1 register value */
@@ -7508,9 +7517,9 @@
   uint32_t tmpccer;
 
   /* Disable the Channel 1: Reset the CC1E Bit */
+  tmpccer = TIMx->CCER;
   TIMx->CCER &= ~TIM_CCER_CC1E;
   tmpccmr1 = TIMx->CCMR1;
-  tmpccer = TIMx->CCER;
 
   /* Select the Input */
   if (IS_TIM_CC2_INSTANCE(TIMx) != RESET)
@@ -7598,9 +7607,9 @@
   uint32_t tmpccer;
 
   /* Disable the Channel 2: Reset the CC2E Bit */
+  tmpccer = TIMx->CCER;
   TIMx->CCER &= ~TIM_CCER_CC2E;
   tmpccmr1 = TIMx->CCMR1;
-  tmpccer = TIMx->CCER;
 
   /* Select the Input */
   tmpccmr1 &= ~TIM_CCMR1_CC2S;
@@ -7637,9 +7646,9 @@
   uint32_t tmpccer;
 
   /* Disable the Channel 2: Reset the CC2E Bit */
+  tmpccer = TIMx->CCER;
   TIMx->CCER &= ~TIM_CCER_CC2E;
   tmpccmr1 = TIMx->CCMR1;
-  tmpccer = TIMx->CCER;
 
   /* Set the filter */
   tmpccmr1 &= ~TIM_CCMR1_IC2F;
@@ -7681,9 +7690,9 @@
   uint32_t tmpccer;
 
   /* Disable the Channel 3: Reset the CC3E Bit */
+  tmpccer = TIMx->CCER;
   TIMx->CCER &= ~TIM_CCER_CC3E;
   tmpccmr2 = TIMx->CCMR2;
-  tmpccer = TIMx->CCER;
 
   /* Select the Input */
   tmpccmr2 &= ~TIM_CCMR2_CC3S;
@@ -7729,9 +7738,9 @@
   uint32_t tmpccer;
 
   /* Disable the Channel 4: Reset the CC4E Bit */
+  tmpccer = TIMx->CCER;
   TIMx->CCER &= ~TIM_CCER_CC4E;
   tmpccmr2 = TIMx->CCMR2;
-  tmpccer = TIMx->CCER;
 
   /* Select the Input */
   tmpccmr2 &= ~TIM_CCMR2_CC4S;
diff --git a/Src/stm32l4xx_hal_tim_ex.c b/Src/stm32l4xx_hal_tim_ex.c
index d7c0e04..d4c52fc 100644
--- a/Src/stm32l4xx_hal_tim_ex.c
+++ b/Src/stm32l4xx_hal_tim_ex.c
@@ -2819,13 +2819,13 @@
 {
   uint32_t tmp;
 
-  tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */
+  tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */
 
   /* Reset the CCxNE Bit */
   TIMx->CCER &=  ~tmp;
 
   /* Set or reset the CCxNE Bit */
-  TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */
+  TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */
 }
 /**
   * @}
diff --git a/Src/stm32l4xx_hal_tsc.c b/Src/stm32l4xx_hal_tsc.c
index 9196b44..aedb28a 100644
--- a/Src/stm32l4xx_hal_tsc.c
+++ b/Src/stm32l4xx_hal_tsc.c
@@ -822,7 +822,7 @@
   * @param  gx_index Index of the group
   * @retval Group status
   */
-TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef *htsc, uint32_t gx_index)
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(const TSC_HandleTypeDef *htsc, uint32_t gx_index)
 {
   /* Check the parameters */
   assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
@@ -839,7 +839,7 @@
   * @param  gx_index Index of the group
   * @retval Acquisition measure
   */
-uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef *htsc, uint32_t gx_index)
+uint32_t HAL_TSC_GroupGetValue(const TSC_HandleTypeDef *htsc, uint32_t gx_index)
 {
   /* Check the parameters */
   assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
@@ -874,7 +874,7 @@
   * @param  config Pointer to the configuration structure.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef *htsc, TSC_IOConfigTypeDef *config)
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef *htsc, const TSC_IOConfigTypeDef *config)
 {
   /* Check the parameters */
   assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
diff --git a/Src/stm32l4xx_hal_uart.c b/Src/stm32l4xx_hal_uart.c
index f7da1c9..a3e3faa 100644
--- a/Src/stm32l4xx_hal_uart.c
+++ b/Src/stm32l4xx_hal_uart.c
@@ -109,7 +109,7 @@
 
     [..]
     Use function HAL_UART_UnRegisterCallback() to reset a callback to the default
-    weak (surcharged) function.
+    weak function.
     HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle,
     and the Callback ID.
     This function allows to reset following callbacks:
@@ -135,10 +135,10 @@
 
     [..]
     By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET
-    all callbacks are set to the corresponding weak (surcharged) functions:
+    all callbacks are set to the corresponding weak functions:
     examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback().
     Exception done for MspInit and MspDeInit functions that are respectively
-    reset to the legacy weak (surcharged) functions in the HAL_UART_Init()
+    reset to the legacy weak functions in the HAL_UART_Init()
     and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand).
     If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit()
     keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
@@ -155,7 +155,7 @@
     [..]
     When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or
     not defined, the callback registration feature is not available
-    and weak (surcharged) callbacks are used.
+    and weak callbacks are used.
 
 
   @endverbatim
@@ -194,7 +194,7 @@
                                       USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */
 #else
 #define USART_CR3_FIELDS  ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE |\
-                            USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */
+                                      USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */
 #endif /* USART_CR1_FIFOEN */
 
 #define LPUART_BRR_MIN  0x00000300U  /* LPUART BRR minimum authorized value */
@@ -211,8 +211,8 @@
 /** @addtogroup UART_Private_Functions
   * @{
   */
-static void UART_EndTxTransfer(UART_HandleTypeDef *huart);
 static void UART_EndRxTransfer(UART_HandleTypeDef *huart);
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart);
 static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
 static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
 static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
@@ -368,17 +368,19 @@
 
   __HAL_UART_DISABLE(huart);
 
+  /* Perform advanced settings configuration */
+  /* For some items, configuration requires to be done prior TE and RE bits are set */
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
   /* Set the UART Communication parameters */
   if (UART_SetConfig(huart) == HAL_ERROR)
   {
     return HAL_ERROR;
   }
 
-  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
-  {
-    UART_AdvFeatureConfig(huart);
-  }
-
   /* In asynchronous mode, the following bits must be kept cleared:
   - LINEN and CLKEN bits in the USART_CR2 register,
   - SCEN, HDSEL and IREN  bits in the USART_CR3 register.*/
@@ -433,17 +435,19 @@
 
   __HAL_UART_DISABLE(huart);
 
+  /* Perform advanced settings configuration */
+  /* For some items, configuration requires to be done prior TE and RE bits are set */
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
   /* Set the UART Communication parameters */
   if (UART_SetConfig(huart) == HAL_ERROR)
   {
     return HAL_ERROR;
   }
 
-  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
-  {
-    UART_AdvFeatureConfig(huart);
-  }
-
   /* In half-duplex mode, the following bits must be kept cleared:
   - LINEN and CLKEN bits in the USART_CR2 register,
   - SCEN and IREN bits in the USART_CR3 register.*/
@@ -519,17 +523,19 @@
 
   __HAL_UART_DISABLE(huart);
 
+  /* Perform advanced settings configuration */
+  /* For some items, configuration requires to be done prior TE and RE bits are set */
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
   /* Set the UART Communication parameters */
   if (UART_SetConfig(huart) == HAL_ERROR)
   {
     return HAL_ERROR;
   }
 
-  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
-  {
-    UART_AdvFeatureConfig(huart);
-  }
-
   /* In LIN mode, the following bits must be kept cleared:
   - LINEN and CLKEN bits in the USART_CR2 register,
   - SCEN and IREN bits in the USART_CR3 register.*/
@@ -603,17 +609,19 @@
 
   __HAL_UART_DISABLE(huart);
 
+  /* Perform advanced settings configuration */
+  /* For some items, configuration requires to be done prior TE and RE bits are set */
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
   /* Set the UART Communication parameters */
   if (UART_SetConfig(huart) == HAL_ERROR)
   {
     return HAL_ERROR;
   }
 
-  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
-  {
-    UART_AdvFeatureConfig(huart);
-  }
-
   /* In multiprocessor mode, the following bits must be kept cleared:
   - LINEN and CLKEN bits in the USART_CR2 register,
   - SCEN, HDSEL and IREN  bits in the USART_CR3 register. */
@@ -716,7 +724,7 @@
 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User UART Callback
-  *         To be used instead of the weak predefined callback
+  *         To be used to override the weak predefined callback
   * @note   The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(),
   *         HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register
   *         callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID
@@ -3385,6 +3393,13 @@
   /* Check whether the set of advanced features to configure is properly set */
   assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit));
 
+  /* if required, configure RX/TX pins swap */
+  if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap));
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap);
+  }
+
   /* if required, configure TX pin active level inversion */
   if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT))
   {
@@ -3406,13 +3421,6 @@
     MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert);
   }
 
-  /* if required, configure RX/TX pins swap */
-  if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT))
-  {
-    assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap));
-    MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap);
-  }
-
   /* if required, configure RX overrun detection disabling */
   if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT))
   {
@@ -3550,20 +3558,20 @@
       {
         if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET)
         {
-           /* Clear Overrun Error flag*/
-           __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF);
+          /* Clear Overrun Error flag*/
+          __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF);
 
-           /* Blocking error : transfer is aborted
-           Set the UART state ready to be able to start again the process,
-           Disable Rx Interrupts if ongoing */
-           UART_EndRxTransfer(huart);
+          /* Blocking error : transfer is aborted
+          Set the UART state ready to be able to start again the process,
+          Disable Rx Interrupts if ongoing */
+          UART_EndRxTransfer(huart);
 
-           huart->ErrorCode = HAL_UART_ERROR_ORE;
+          huart->ErrorCode = HAL_UART_ERROR_ORE;
 
-           /* Process Unlocked */
-           __HAL_UNLOCK(huart);
+          /* Process Unlocked */
+          __HAL_UNLOCK(huart);
 
-           return HAL_ERROR;
+          return HAL_ERROR;
         }
         if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET)
         {
diff --git a/Src/stm32l4xx_hal_uart_ex.c b/Src/stm32l4xx_hal_uart_ex.c
index 9323bb9..39bdd60 100644
--- a/Src/stm32l4xx_hal_uart_ex.c
+++ b/Src/stm32l4xx_hal_uart_ex.c
@@ -215,17 +215,19 @@
   /* Disable the Peripheral */
   __HAL_UART_DISABLE(huart);
 
+  /* Perform advanced settings configuration */
+  /* For some items, configuration requires to be done prior TE and RE bits are set */
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
   /* Set the UART Communication parameters */
   if (UART_SetConfig(huart) == HAL_ERROR)
   {
     return HAL_ERROR;
   }
 
-  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
-  {
-    UART_AdvFeatureConfig(huart);
-  }
-
   /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
   SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
 
@@ -887,7 +889,7 @@
   */
 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
 {
-  HAL_StatusTypeDef status;
+  HAL_StatusTypeDef status = HAL_OK;
 
   /* Check that a Rx process is not already ongoing */
   if (huart->RxState == HAL_UART_STATE_READY)
@@ -901,24 +903,20 @@
     huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
     huart->RxEventType = HAL_UART_RXEVENT_TC;
 
-    status =  UART_Start_Receive_IT(huart, pData, Size);
+    (void)UART_Start_Receive_IT(huart, pData, Size);
 
-    /* Check Rx process has been successfully started */
-    if (status == HAL_OK)
+    if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
     {
-      if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
-      {
-        __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
-        ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
-      }
-      else
-      {
-        /* In case of errors already pending when reception is started,
-           Interrupts may have already been raised and lead to reception abortion.
-           (Overrun error for instance).
-           In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
-        status = HAL_ERROR;
-      }
+      __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+      ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+    }
+    else
+    {
+      /* In case of errors already pending when reception is started,
+         Interrupts may have already been raised and lead to reception abortion.
+         (Overrun error for instance).
+         In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
+      status = HAL_ERROR;
     }
 
     return status;
@@ -1014,10 +1012,10 @@
   * @param  huart UART handle.
   * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values)
   */
-HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart)
+HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart)
 {
   /* Return Rx Event type value, as stored in UART handle */
-  return(huart->RxEventType);
+  return (huart->RxEventType);
 }
 
 /**
diff --git a/Src/stm32l4xx_hal_usart.c b/Src/stm32l4xx_hal_usart.c
index c51e8ab..71a3e41 100644
--- a/Src/stm32l4xx_hal_usart.c
+++ b/Src/stm32l4xx_hal_usart.c
@@ -91,7 +91,7 @@
 
     [..]
     Use function HAL_USART_UnRegisterCallback() to reset a callback to the default
-    weak (surcharged) function.
+    weak function.
     HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle,
     and the Callback ID.
     This function allows to reset following callbacks:
@@ -109,10 +109,10 @@
 
     [..]
     By default, after the HAL_USART_Init() and when the state is HAL_USART_STATE_RESET
-    all callbacks are set to the corresponding weak (surcharged) functions:
+    all callbacks are set to the corresponding weak functions:
     examples HAL_USART_TxCpltCallback(), HAL_USART_RxHalfCpltCallback().
     Exception done for MspInit and MspDeInit functions that are respectively
-    reset to the legacy weak (surcharged) functions in the HAL_USART_Init()
+    reset to the legacy weak functions in the HAL_USART_Init()
     and HAL_USART_DeInit() only when these callbacks are null (not registered beforehand).
     If not, MspInit or MspDeInit are not null, the HAL_USART_Init() and HAL_USART_DeInit()
     keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
@@ -129,7 +129,7 @@
     [..]
     When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or
     not defined, the callback registration feature is not available
-    and weak (surcharged) callbacks are used.
+    and weak callbacks are used.
 
 
   @endverbatim
@@ -417,7 +417,7 @@
 #if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
 /**
   * @brief  Register a User USART Callback
-  *         To be used instead of the weak predefined callback
+  *         To be used to override the weak predefined callback
   * @note   The HAL_USART_RegisterCallback() may be called before HAL_USART_Init() in HAL_USART_STATE_RESET
   *         to register callbacks for HAL_USART_MSPINIT_CB_ID and HAL_USART_MSPDEINIT_CB_ID
   * @param  husart usart handle
@@ -1287,7 +1287,7 @@
       }
 #else
       if (husart->Init.Parity != USART_PARITY_NONE)
-      {  
+      {
         SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
       }
       else
@@ -1429,7 +1429,7 @@
       }
 #else
       if (husart->Init.Parity != USART_PARITY_NONE)
-      {  
+      {
         SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
       }
       else
@@ -1858,7 +1858,7 @@
 
     /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */
     if (husart->Init.Parity != USART_PARITY_NONE)
-    {    
+    {
       SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
     }
     SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
diff --git a/Src/stm32l4xx_ll_adc.c b/Src/stm32l4xx_ll_adc.c
index 693f613..8fde353 100644
--- a/Src/stm32l4xx_ll_adc.c
+++ b/Src/stm32l4xx_ll_adc.c
@@ -25,7 +25,7 @@
 #include "stm32_assert.h"
 #else
 #define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
 
 /** @addtogroup STM32L4xx_LL_Driver
   * @{
@@ -306,7 +306,7 @@
   *          - SUCCESS: ADC common registers are de-initialized
   *          - ERROR: not applicable
   */
-ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON)
+ErrorStatus LL_ADC_CommonDeInit(const ADC_Common_TypeDef *ADCxy_COMMON)
 {
   /* Check the parameters */
   assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
@@ -333,25 +333,25 @@
   *         must be disabled.
   * @param  ADCxy_COMMON ADC common instance
   *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
-  * @param  ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+  * @param  pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
   * @retval An ErrorStatus enumeration value:
   *          - SUCCESS: ADC common registers are initialized
   *          - ERROR: ADC common registers are not initialized
   */
-ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, const LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct)
 {
   ErrorStatus status = SUCCESS;
 
   /* Check the parameters */
   assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
-  assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock));
+  assert_param(IS_LL_ADC_COMMON_CLOCK(pADC_CommonInitStruct->CommonClock));
 
 #if defined(ADC_MULTIMODE_SUPPORT)
-  assert_param(IS_LL_ADC_MULTI_MODE(ADC_CommonInitStruct->Multimode));
-  if (ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
+  assert_param(IS_LL_ADC_MULTI_MODE(pADC_CommonInitStruct->Multimode));
+  if (pADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
   {
-    assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(ADC_CommonInitStruct->MultiDMATransfer));
-    assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(ADC_CommonInitStruct->MultiTwoSamplingDelay));
+    assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(pADC_CommonInitStruct->MultiDMATransfer));
+    assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(pADC_CommonInitStruct->MultiTwoSamplingDelay));
   }
 #endif /* ADC_MULTIMODE_SUPPORT */
 
@@ -372,7 +372,7 @@
     /*    - Set ADC multimode DMA transfer                                    */
     /*    - Set ADC multimode: delay between 2 sampling phases                */
 #if defined(ADC_MULTIMODE_SUPPORT)
-    if (ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
+    if (pADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
     {
       MODIFY_REG(ADCxy_COMMON->CCR,
                  ADC_CCR_CKMODE
@@ -381,10 +381,10 @@
                  | ADC_CCR_MDMA
                  | ADC_CCR_DELAY
                  ,
-                 ADC_CommonInitStruct->CommonClock
-                 | ADC_CommonInitStruct->Multimode
-                 | ADC_CommonInitStruct->MultiDMATransfer
-                 | ADC_CommonInitStruct->MultiTwoSamplingDelay
+                 pADC_CommonInitStruct->CommonClock
+                 | pADC_CommonInitStruct->Multimode
+                 | pADC_CommonInitStruct->MultiDMATransfer
+                 | pADC_CommonInitStruct->MultiTwoSamplingDelay
                 );
     }
     else
@@ -396,13 +396,13 @@
                  | ADC_CCR_MDMA
                  | ADC_CCR_DELAY
                  ,
-                 ADC_CommonInitStruct->CommonClock
+                 pADC_CommonInitStruct->CommonClock
                  | LL_ADC_MULTI_INDEPENDENT
                 );
     }
 #else
-    LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock);
-#endif
+    LL_ADC_SetCommonClock(ADCxy_COMMON, pADC_CommonInitStruct->CommonClock);
+#endif /* ADC_MULTIMODE_SUPPORT */
   }
   else
   {
@@ -416,22 +416,22 @@
 
 /**
   * @brief  Set each @ref LL_ADC_CommonInitTypeDef field to default value.
-  * @param  ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+  * @param  pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
   *                              whose fields will be set to default values.
   * @retval None
   */
-void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct)
 {
-  /* Set ADC_CommonInitStruct fields to default values */
+  /* Set pADC_CommonInitStruct fields to default values */
   /* Set fields of ADC common */
   /* (all ADC instances belonging to the same ADC common instance) */
-  ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2;
+  pADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2;
 
 #if defined(ADC_MULTIMODE_SUPPORT)
   /* Set fields of ADC multimode */
-  ADC_CommonInitStruct->Multimode             = LL_ADC_MULTI_INDEPENDENT;
-  ADC_CommonInitStruct->MultiDMATransfer      = LL_ADC_MULTI_REG_DMA_EACH_ADC;
-  ADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE;
+  pADC_CommonInitStruct->Multimode             = LL_ADC_MULTI_INDEPENDENT;
+  pADC_CommonInitStruct->MultiDMATransfer      = LL_ADC_MULTI_REG_DMA_EACH_ADC;
+  pADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE;
 #endif /* ADC_MULTIMODE_SUPPORT */
 }
 
@@ -699,14 +699,14 @@
   * @brief  Initialize some features of ADC instance.
   * @note   These parameters have an impact on ADC scope: ADC instance.
   *         Affects both group regular and group injected (availability
-  *         of ADC group injected depends on STM32 families).
+  *         of ADC group injected depends on STM32 series).
   *         Refer to corresponding unitary functions into
   *         @ref ADC_LL_EF_Configuration_ADC_Instance .
   * @note   The setting of these parameters by function @ref LL_ADC_Init()
   *         is conditioned to ADC state:
   *         ADC instance must be disabled.
   *         This condition is applied to all ADC features, for efficiency
-  *         and compatibility over all STM32 families. However, the different
+  *         and compatibility over all STM32 series. However, the different
   *         features can be set under different ADC state conditions
   *         (setting possible with ADC enabled without conversion on going,
   *         ADC enabled with conversion on going, ...)
@@ -723,21 +723,21 @@
   *          - Set ADC channel sampling time
   *            Refer to function LL_ADC_SetChannelSamplingTime();
   * @param  ADCx ADC instance
-  * @param  ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @param  pADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
   * @retval An ErrorStatus enumeration value:
   *          - SUCCESS: ADC registers are initialized
   *          - ERROR: ADC registers are not initialized
   */
-ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct)
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct)
 {
   ErrorStatus status = SUCCESS;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(ADCx));
 
-  assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution));
-  assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment));
-  assert_param(IS_LL_ADC_LOW_POWER(ADC_InitStruct->LowPowerMode));
+  assert_param(IS_LL_ADC_RESOLUTION(pADC_InitStruct->Resolution));
+  assert_param(IS_LL_ADC_DATA_ALIGN(pADC_InitStruct->DataAlignment));
+  assert_param(IS_LL_ADC_LOW_POWER(pADC_InitStruct->LowPowerMode));
 
   /* Note: Hardware constraint (refer to description of this function):       */
   /*       ADC instance must be disabled.                                     */
@@ -753,9 +753,9 @@
                | ADC_CFGR_ALIGN
                | ADC_CFGR_AUTDLY
                ,
-               ADC_InitStruct->Resolution
-               | ADC_InitStruct->DataAlignment
-               | ADC_InitStruct->LowPowerMode
+               pADC_InitStruct->Resolution
+               | pADC_InitStruct->DataAlignment
+               | pADC_InitStruct->LowPowerMode
               );
 
   }
@@ -770,17 +770,17 @@
 
 /**
   * @brief  Set each @ref LL_ADC_InitTypeDef field to default value.
-  * @param  ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure
+  * @param  pADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure
   *                        whose fields will be set to default values.
   * @retval None
   */
-void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct)
+void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct)
 {
-  /* Set ADC_InitStruct fields to default values */
+  /* Set pADC_InitStruct fields to default values */
   /* Set fields of ADC instance */
-  ADC_InitStruct->Resolution    = LL_ADC_RESOLUTION_12B;
-  ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
-  ADC_InitStruct->LowPowerMode  = LL_ADC_LP_MODE_NONE;
+  pADC_InitStruct->Resolution    = LL_ADC_RESOLUTION_12B;
+  pADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
+  pADC_InitStruct->LowPowerMode  = LL_ADC_LP_MODE_NONE;
 
 }
 
@@ -794,7 +794,7 @@
   *         is conditioned to ADC state:
   *         ADC instance must be disabled.
   *         This condition is applied to all ADC features, for efficiency
-  *         and compatibility over all STM32 families. However, the different
+  *         and compatibility over all STM32 series. However, the different
   *         features can be set under different ADC state conditions
   *         (setting possible with ADC enabled without conversion on going,
   *         ADC enabled with conversion on going, ...)
@@ -811,31 +811,31 @@
   *          - Set ADC channel sampling time
   *            Refer to function LL_ADC_SetChannelSamplingTime();
   * @param  ADCx ADC instance
-  * @param  ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @param  pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
   * @retval An ErrorStatus enumeration value:
   *          - SUCCESS: ADC registers are initialized
   *          - ERROR: ADC registers are not initialized
   */
-ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, const LL_ADC_REG_InitTypeDef *pADC_RegInitStruct)
 {
   ErrorStatus status = SUCCESS;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(ADCx));
-  assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource));
-  assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength));
-  if (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+  assert_param(IS_LL_ADC_REG_TRIG_SOURCE(pADC_RegInitStruct->TriggerSource));
+  assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(pADC_RegInitStruct->SequencerLength));
+  if (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
   {
-    assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont));
+    assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(pADC_RegInitStruct->SequencerDiscont));
 
     /* ADC group regular continuous mode and discontinuous mode                 */
     /* can not be enabled simultenaeously                                       */
-    assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE)
-                 || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE));
+    assert_param((pADC_RegInitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE)
+                 || (pADC_RegInitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE));
   }
-  assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode));
-  assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer));
-  assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(ADC_REG_InitStruct->Overrun));
+  assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(pADC_RegInitStruct->ContinuousMode));
+  assert_param(IS_LL_ADC_REG_DMA_TRANSFER(pADC_RegInitStruct->DMATransfer));
+  assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(pADC_RegInitStruct->Overrun));
 
   /* Note: Hardware constraint (refer to description of this function):       */
   /*       ADC instance must be disabled.                                     */
@@ -852,7 +852,7 @@
     /*    - Set ADC group regular overrun behavior                            */
     /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by    */
     /*       setting of trigger source to SW start.                           */
-    if (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+    if (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
     {
       MODIFY_REG(ADCx->CFGR,
                  ADC_CFGR_EXTSEL
@@ -864,11 +864,11 @@
                  | ADC_CFGR_DMACFG
                  | ADC_CFGR_OVRMOD
                  ,
-                 ADC_REG_InitStruct->TriggerSource
-                 | ADC_REG_InitStruct->SequencerDiscont
-                 | ADC_REG_InitStruct->ContinuousMode
-                 | ADC_REG_InitStruct->DMATransfer
-                 | ADC_REG_InitStruct->Overrun
+                 pADC_RegInitStruct->TriggerSource
+                 | pADC_RegInitStruct->SequencerDiscont
+                 | pADC_RegInitStruct->ContinuousMode
+                 | pADC_RegInitStruct->DMATransfer
+                 | pADC_RegInitStruct->Overrun
                 );
     }
     else
@@ -883,16 +883,16 @@
                  | ADC_CFGR_DMACFG
                  | ADC_CFGR_OVRMOD
                  ,
-                 ADC_REG_InitStruct->TriggerSource
+                 pADC_RegInitStruct->TriggerSource
                  | LL_ADC_REG_SEQ_DISCONT_DISABLE
-                 | ADC_REG_InitStruct->ContinuousMode
-                 | ADC_REG_InitStruct->DMATransfer
-                 | ADC_REG_InitStruct->Overrun
+                 | pADC_RegInitStruct->ContinuousMode
+                 | pADC_RegInitStruct->DMATransfer
+                 | pADC_RegInitStruct->Overrun
                 );
     }
 
     /* Set ADC group regular sequencer length and scan direction */
-    LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength);
+    LL_ADC_REG_SetSequencerLength(ADCx, pADC_RegInitStruct->SequencerLength);
   }
   else
   {
@@ -904,22 +904,22 @@
 
 /**
   * @brief  Set each @ref LL_ADC_REG_InitTypeDef field to default value.
-  * @param  ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @param  pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
   *                            whose fields will be set to default values.
   * @retval None
   */
-void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct)
 {
-  /* Set ADC_REG_InitStruct fields to default values */
+  /* Set pADC_RegInitStruct fields to default values */
   /* Set fields of ADC group regular */
   /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by      */
   /*       setting of trigger source to SW start.                             */
-  ADC_REG_InitStruct->TriggerSource    = LL_ADC_REG_TRIG_SOFTWARE;
-  ADC_REG_InitStruct->SequencerLength  = LL_ADC_REG_SEQ_SCAN_DISABLE;
-  ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
-  ADC_REG_InitStruct->ContinuousMode   = LL_ADC_REG_CONV_SINGLE;
-  ADC_REG_InitStruct->DMATransfer      = LL_ADC_REG_DMA_TRANSFER_NONE;
-  ADC_REG_InitStruct->Overrun          = LL_ADC_REG_OVR_DATA_OVERWRITTEN;
+  pADC_RegInitStruct->TriggerSource    = LL_ADC_REG_TRIG_SOFTWARE;
+  pADC_RegInitStruct->SequencerLength  = LL_ADC_REG_SEQ_SCAN_DISABLE;
+  pADC_RegInitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
+  pADC_RegInitStruct->ContinuousMode   = LL_ADC_REG_CONV_SINGLE;
+  pADC_RegInitStruct->DMATransfer      = LL_ADC_REG_DMA_TRANSFER_NONE;
+  pADC_RegInitStruct->Overrun          = LL_ADC_REG_OVR_DATA_OVERWRITTEN;
 }
 
 /**
@@ -932,7 +932,7 @@
   *         is conditioned to ADC state:
   *         ADC instance must be disabled.
   *         This condition is applied to all ADC features, for efficiency
-  *         and compatibility over all STM32 families. However, the different
+  *         and compatibility over all STM32 series. However, the different
   *         features can be set under different ADC state conditions
   *         (setting possible with ADC enabled without conversion on going,
   *         ADC enabled with conversion on going, ...)
@@ -955,24 +955,24 @@
   *         To set several features of ADC group injected, use
   *         function @ref LL_ADC_INJ_ConfigQueueContext().
   * @param  ADCx ADC instance
-  * @param  ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
+  * @param  pADC_InjInitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
   * @retval An ErrorStatus enumeration value:
   *          - SUCCESS: ADC registers are initialized
   *          - ERROR: ADC registers are not initialized
   */
-ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct)
+ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, const LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct)
 {
   ErrorStatus status = SUCCESS;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(ADCx));
-  assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource));
-  assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength));
-  if (ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE)
+  assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(pADC_InjInitStruct->TriggerSource));
+  assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(pADC_InjInitStruct->SequencerLength));
+  if (pADC_InjInitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE)
   {
-    assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont));
+    assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(pADC_InjInitStruct->SequencerDiscont));
   }
-  assert_param(IS_LL_ADC_INJ_TRIG_AUTO(ADC_INJ_InitStruct->TrigAuto));
+  assert_param(IS_LL_ADC_INJ_TRIG_AUTO(pADC_InjInitStruct->TrigAuto));
 
   /* Note: Hardware constraint (refer to description of this function):       */
   /*       ADC instance must be disabled.                                     */
@@ -987,14 +987,14 @@
     /*      from ADC group regular                                            */
     /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by    */
     /*       setting of trigger source to SW start.                           */
-    if (ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+    if (pADC_InjInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
     {
       MODIFY_REG(ADCx->CFGR,
                  ADC_CFGR_JDISCEN
                  | ADC_CFGR_JAUTO
                  ,
-                 ADC_INJ_InitStruct->SequencerDiscont
-                 | ADC_INJ_InitStruct->TrigAuto
+                 pADC_InjInitStruct->SequencerDiscont
+                 | pADC_InjInitStruct->TrigAuto
                 );
     }
     else
@@ -1004,7 +1004,7 @@
                  | ADC_CFGR_JAUTO
                  ,
                  LL_ADC_REG_SEQ_DISCONT_DISABLE
-                 | ADC_INJ_InitStruct->TrigAuto
+                 | pADC_InjInitStruct->TrigAuto
                 );
     }
 
@@ -1013,8 +1013,8 @@
                | ADC_JSQR_JEXTEN
                | ADC_JSQR_JL
                ,
-               ADC_INJ_InitStruct->TriggerSource
-               | ADC_INJ_InitStruct->SequencerLength
+               pADC_InjInitStruct->TriggerSource
+               | pADC_InjInitStruct->SequencerLength
               );
   }
   else
@@ -1027,18 +1027,18 @@
 
 /**
   * @brief  Set each @ref LL_ADC_INJ_InitTypeDef field to default value.
-  * @param  ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
+  * @param  pADC_InjInitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
   *                            whose fields will be set to default values.
   * @retval None
   */
-void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct)
+void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct)
 {
-  /* Set ADC_INJ_InitStruct fields to default values */
+  /* Set pADC_InjInitStruct fields to default values */
   /* Set fields of ADC group injected */
-  ADC_INJ_InitStruct->TriggerSource    = LL_ADC_INJ_TRIG_SOFTWARE;
-  ADC_INJ_InitStruct->SequencerLength  = LL_ADC_INJ_SEQ_SCAN_DISABLE;
-  ADC_INJ_InitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE;
-  ADC_INJ_InitStruct->TrigAuto         = LL_ADC_INJ_TRIG_INDEPENDENT;
+  pADC_InjInitStruct->TriggerSource    = LL_ADC_INJ_TRIG_SOFTWARE;
+  pADC_InjInitStruct->SequencerLength  = LL_ADC_INJ_SEQ_SCAN_DISABLE;
+  pADC_InjInitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE;
+  pADC_InjInitStruct->TrigAuto         = LL_ADC_INJ_TRIG_INDEPENDENT;
 }
 
 /**
diff --git a/Src/stm32l4xx_ll_comp.c b/Src/stm32l4xx_ll_comp.c
index 33a574c..c9b6f6a 100644
--- a/Src/stm32l4xx_ll_comp.c
+++ b/Src/stm32l4xx_ll_comp.c
@@ -15,6 +15,7 @@
   *
   ******************************************************************************
   */
+
 #if defined(USE_FULL_LL_DRIVER)
 
 /* Includes ------------------------------------------------------------------*/
@@ -49,7 +50,7 @@
 /* COMP instance.                                                             */
 
 #define IS_LL_COMP_POWER_MODE(__POWER_MODE__)                                  \
-  (   ((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED)                        \
+  (((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED)                           \
    || ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED)                      \
    || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER)                    \
   )
@@ -60,16 +61,16 @@
 /*       compatibility with other STM32 families.                             */
 #if defined(COMP_CSR_INPSEL_1)
 #define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__)               \
-  (   ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1)                             \
+  (((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1)                                \
    || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO2)                             \
    || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO3)                             \
   )
 #else
 #define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__)               \
-  (   ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1)                             \
+  (((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1)                                \
    || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO2)                             \
   )
-#endif
+#endif /* COMP_CSR_INPSEL_1 */
 
 /* Note: On this STM32 series, comparator input minus parameters are          */
 /*       the same on all COMP instances.                                      */
@@ -77,7 +78,7 @@
 /*       compatibility with other STM32 families.                             */
 #if defined(COMP_CSR_INMESEL_1)
 #define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__)             \
-  (   ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT)                    \
+  (((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT)                       \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT)                    \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT)                    \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT)                       \
@@ -91,7 +92,7 @@
   )
 #else
 #define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__)             \
-  (   ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT)                    \
+  (((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT)                    \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT)                    \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT)                    \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT)                       \
@@ -100,66 +101,50 @@
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1)                           \
    || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO2)                           \
   )
-#endif
+#endif /* COMP_CSR_INMESEL_1 */
 
 #define IS_LL_COMP_INPUT_HYSTERESIS(__INPUT_HYSTERESIS__)                      \
-  (   ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE)                      \
+  (((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE)                         \
    || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_LOW)                       \
    || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_MEDIUM)                    \
    || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_HIGH)                      \
   )
 
 #define IS_LL_COMP_OUTPUT_POLARITY(__POLARITY__)                               \
-  (   ((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED)                        \
+  (((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED)                           \
    || ((__POLARITY__) == LL_COMP_OUTPUTPOL_INVERTED)                           \
   )
 
 #if defined(COMP2)
 #define IS_LL_COMP_OUTPUT_BLANKING_SOURCE(__COMP_INSTANCE__, __OUTPUT_BLANKING_SOURCE__)       \
   (((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_NONE)                                  \
-    ? (                                                                                        \
-       (1UL)                                                                                   \
-      )                                                                                        \
-      :                                                                                        \
-      (((__COMP_INSTANCE__) == COMP1)                                                          \
-        ? (                                                                                    \
-              ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)             \
+   || (((__COMP_INSTANCE__) == COMP1)                                                     \
+       ? (                                                                                    \
+           ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)             \
            || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)             \
            || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1)             \
-          )                                                                                    \
-          :                                                                                    \
-          (                                                                                    \
-              ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2)             \
+         )                                                                                    \
+       :                                                                                    \
+       (                                                                                    \
+           ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2)             \
            || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2)             \
            || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2)            \
-          )                                                                                    \
+       )                                                                                    \
       )                                                                                        \
   )
 #else
 #if defined(TIM3)
 #define IS_LL_COMP_OUTPUT_BLANKING_SOURCE(__COMP_INSTANCE__, __OUTPUT_BLANKING_SOURCE__)       \
   (((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_NONE)                                  \
-    ? (                                                                                        \
-       (1UL)                                                                                   \
-      )                                                                                        \
-      :                                                                                        \
-      (                                                                                        \
-           ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)                \
-        || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)                \
-        || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1)                \
-      )                                                                                        \
+   || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)                \
+   || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)                \
+   || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1)                \
   )
 #else
 #define IS_LL_COMP_OUTPUT_BLANKING_SOURCE(__COMP_INSTANCE__, __OUTPUT_BLANKING_SOURCE__)       \
   (((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_NONE)                                  \
-    ? (                                                                                        \
-       (1UL)                                                                                   \
-      )                                                                                        \
-      :                                                                                        \
-      (                                                                                        \
-           ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)                \
-        || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)                \
-      )                                                                                        \
+   || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)                \
+   || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)                \
   )
 #endif /* TIM3 */
 #endif /* COMP2 */
@@ -227,7 +212,7 @@
   *          - SUCCESS: COMP registers are initialized
   *          - ERROR: COMP registers are not initialized
   */
-ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct)
+ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, const LL_COMP_InitTypeDef *COMP_InitStruct)
 {
   ErrorStatus status = SUCCESS;
 
@@ -288,7 +273,7 @@
                | COMP_InitStruct->OutputPolarity
                | COMP_InitStruct->OutputBlankingSource
               );
-#endif
+#endif /* COMP_CSR_INMESEL_1 */
 
   }
   else
diff --git a/Src/stm32l4xx_ll_crc.c b/Src/stm32l4xx_ll_crc.c
index fbb3807..839c80c 100644
--- a/Src/stm32l4xx_ll_crc.c
+++ b/Src/stm32l4xx_ll_crc.c
@@ -59,7 +59,7 @@
   *          - SUCCESS: CRC registers are de-initialized
   *          - ERROR: CRC registers are not de-initialized
   */
-ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx)
+ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx)
 {
   ErrorStatus status = SUCCESS;
 
diff --git a/Src/stm32l4xx_ll_dac.c b/Src/stm32l4xx_ll_dac.c
index 3fb52fe..cebf762 100644
--- a/Src/stm32l4xx_ll_dac.c
+++ b/Src/stm32l4xx_ll_dac.c
@@ -165,6 +165,10 @@
   */
 ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx)
 {
+
+  /* Prevent unused argument(s) compilation warning */
+  (void)(DACx);
+
   /* Check the parameters */
   assert_param(IS_DAC_ALL_INSTANCE(DACx));
 
@@ -173,7 +177,6 @@
 
   /* Release reset of DAC clock */
   LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_DAC1);
-
   return SUCCESS;
 }
 
@@ -198,7 +201,7 @@
   *         @arg @ref LL_DAC_CHANNEL_1
   *         @arg @ref LL_DAC_CHANNEL_2 (1)
   *
-  *         (1) On this STM32 serie, parameter not available on all devices.
+  *         (1) On this STM32 series, parameter not available on all devices.
   *             Refer to device datasheet for channels availability.
   * @param  DAC_InitStruct Pointer to a @ref LL_DAC_InitTypeDef structure
   * @retval An ErrorStatus enumeration value:
diff --git a/Src/stm32l4xx_ll_fmc.c b/Src/stm32l4xx_ll_fmc.c
index b1c1c77..32bd5f6 100644
--- a/Src/stm32l4xx_ll_fmc.c
+++ b/Src/stm32l4xx_ll_fmc.c
@@ -58,7 +58,8 @@
 /** @addtogroup STM32L4xx_HAL_Driver
   * @{
   */
-#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED)
+#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) \
+ || defined(HAL_SRAM_MODULE_ENABLED)
 
 /** @defgroup FMC_LL  FMC Low Layer
   * @brief FMC driver modules
diff --git a/Src/stm32l4xx_ll_i2c.c b/Src/stm32l4xx_ll_i2c.c
index 1aee15b..6f34239 100644
--- a/Src/stm32l4xx_ll_i2c.c
+++ b/Src/stm32l4xx_ll_i2c.c
@@ -83,7 +83,7 @@
   *          - SUCCESS: I2C registers are de-initialized
   *          - ERROR: I2C registers are not de-initialized
   */
-ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx)
+ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx)
 {
   ErrorStatus status = SUCCESS;
 
@@ -143,7 +143,7 @@
   *          - SUCCESS: I2C registers are initialized
   *          - ERROR: Not applicable
   */
-ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)
+ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct)
 {
   /* Check the I2C Instance I2Cx */
   assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
diff --git a/Src/stm32l4xx_ll_lptim.c b/Src/stm32l4xx_ll_lptim.c
index 0c69544..ddaa0e2 100644
--- a/Src/stm32l4xx_ll_lptim.c
+++ b/Src/stm32l4xx_ll_lptim.c
@@ -92,7 +92,7 @@
   *          - SUCCESS: LPTIMx registers are de-initialized
   *          - ERROR: invalid LPTIMx instance
   */
-ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx)
+ErrorStatus LL_LPTIM_DeInit(const LPTIM_TypeDef *LPTIMx)
 {
   ErrorStatus result = SUCCESS;
 
@@ -286,8 +286,7 @@
       do
       {
         rcc_clock.SYSCLK_Frequency--; /* Used for timeout */
-      }
-      while (((LL_LPTIM_IsActiveFlag_ARROK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
+      } while (((LL_LPTIM_IsActiveFlag_ARROK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
 
       LL_LPTIM_ClearFlag_ARROK(LPTIMx);
     }
diff --git a/Src/stm32l4xx_ll_lpuart.c b/Src/stm32l4xx_ll_lpuart.c
index 9b601cd..baabbea 100644
--- a/Src/stm32l4xx_ll_lpuart.c
+++ b/Src/stm32l4xx_ll_lpuart.c
@@ -44,6 +44,9 @@
   * @{
   */
 
+/* Definition of default baudrate value used for LPUART initialisation */
+#define LPUART_DEFAULT_BAUDRATE          (9600U)
+
 /**
   * @}
   */
@@ -216,9 +219,9 @@
     periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE);
 
     /* Configure the LPUART Baud Rate :
-#if defined(USART_PRESC_PRESCALER)
+    #if defined(USART_PRESC_PRESCALER)
        - prescaler value is required
-#endif
+    #endif
        - valid baud rate value (different from 0) is required
        - Peripheral clock as returned by RCC service, should be valid (different from 0).
     */
@@ -265,7 +268,7 @@
 #if defined(USART_PRESC_PRESCALER)
   LPUART_InitStruct->PrescalerValue      = LL_LPUART_PRESCALER_DIV1;
 #endif /* USART_PRESC_PRESCALER */
-  LPUART_InitStruct->BaudRate            = 9600U;
+  LPUART_InitStruct->BaudRate            = LPUART_DEFAULT_BAUDRATE;
   LPUART_InitStruct->DataWidth           = LL_LPUART_DATAWIDTH_8B;
   LPUART_InitStruct->StopBits            = LL_LPUART_STOPBITS_1;
   LPUART_InitStruct->Parity              = LL_LPUART_PARITY_NONE ;
diff --git a/Src/stm32l4xx_ll_rng.c b/Src/stm32l4xx_ll_rng.c
index 7ae8a02..ef13d31 100644
--- a/Src/stm32l4xx_ll_rng.c
+++ b/Src/stm32l4xx_ll_rng.c
@@ -25,7 +25,7 @@
 #include "stm32_assert.h"
 #else
 #define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
 
 /** @addtogroup STM32L4xx_LL_Driver
   * @{
@@ -42,7 +42,7 @@
 /* Private constants ---------------------------------------------------------*/
 /* Private macros ------------------------------------------------------------*/
 #if defined(RNG_CR_CED)
-/** @addtogroup RNG_LL_Private_Macros
+/** @defgroup RNG_LL_Private_Macros RNG Private Macros
   * @{
   */
 #define IS_LL_RNG_CED(__MODE__) (((__MODE__) == LL_RNG_CED_ENABLE) || \
@@ -53,18 +53,18 @@
 
 
 #define IS_LL_RNG_NIST_COMPLIANCE(__NIST_COMPLIANCE__) (((__NIST_COMPLIANCE__) == LL_RNG_NIST_COMPLIANT) || \
-                                                     ((__NIST_COMPLIANCE__) == LL_RNG_NOTNIST_COMPLIANT))
+                                                        ((__NIST_COMPLIANCE__) == LL_RNG_NOTNIST_COMPLIANT))
 
 #define IS_LL_RNG_CONFIG1 (__CONFIG1__) ((__CONFIG1__) <= 0x3FUL)
 
 #define IS_LL_RNG_CONFIG2 (__CONFIG2__) ((__CONFIG2__) <= 0x07UL)
 
 #define IS_LL_RNG_CONFIG3 (__CONFIG3__) ((__CONFIG3__) <= 0xFUL)
-#endif /* end of RNG_CR_CONDRST*/
+#endif /* RNG_CR_CONDRST */
 /**
   * @}
   */
-#endif
+#endif /* RNG_CR_CED */
 /* Private function prototypes -----------------------------------------------*/
 
 /* Exported functions --------------------------------------------------------*/
@@ -83,7 +83,7 @@
   *          - SUCCESS: RNG registers are de-initialized
   *          - ERROR: not applicable
   */
-ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx)
+ErrorStatus LL_RNG_DeInit(const RNG_TypeDef *RNGx)
 {
   ErrorStatus status = SUCCESS;
 
@@ -129,7 +129,7 @@
 #else
   /* Clock Error Detection configuration */
   MODIFY_REG(RNGx->CR, RNG_CR_CED, RNG_InitStruct->ClockErrorDetection);
-#endif
+#endif /* RNG_CR_CONDRST */
 
   return (SUCCESS);
 }
@@ -146,7 +146,7 @@
   RNG_InitStruct->ClockErrorDetection = LL_RNG_CED_ENABLE;
 
 }
-#endif
+#endif /* RNG_CR_CED */
 /**
   * @}
   */
@@ -166,3 +166,4 @@
   */
 
 #endif /* USE_FULL_LL_DRIVER */
+
diff --git a/Src/stm32l4xx_ll_swpmi.c b/Src/stm32l4xx_ll_swpmi.c
index 8bafe84..3aeaebf 100644
--- a/Src/stm32l4xx_ll_swpmi.c
+++ b/Src/stm32l4xx_ll_swpmi.c
@@ -77,7 +77,7 @@
   *          - SUCCESS: SWPMI registers are de-initialized
   *          - ERROR: Not applicable
   */
-ErrorStatus LL_SWPMI_DeInit(SWPMI_TypeDef *SWPMIx)
+ErrorStatus LL_SWPMI_DeInit(const SWPMI_TypeDef *SWPMIx)
 {
   ErrorStatus status = SUCCESS;
 
@@ -109,7 +109,7 @@
   *          - SUCCESS: SWPMI registers are initialized
   *          - ERROR: SWPMI registers are not initialized
   */
-ErrorStatus LL_SWPMI_Init(SWPMI_TypeDef *SWPMIx, LL_SWPMI_InitTypeDef *SWPMI_InitStruct)
+ErrorStatus LL_SWPMI_Init(SWPMI_TypeDef *SWPMIx, const LL_SWPMI_InitTypeDef *SWPMI_InitStruct)
 {
   ErrorStatus status = SUCCESS;
 
diff --git a/Src/stm32l4xx_ll_tim.c b/Src/stm32l4xx_ll_tim.c
index abf903c..1ce1776 100644
--- a/Src/stm32l4xx_ll_tim.c
+++ b/Src/stm32l4xx_ll_tim.c
@@ -213,7 +213,7 @@
   *          - SUCCESS: TIMx registers are de-initialized
   *          - ERROR: invalid TIMx instance
   */
-ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx)
+ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx)
 {
   ErrorStatus result = SUCCESS;
 
@@ -745,7 +745,6 @@
   MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState);
   MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity);
   MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput);
-  MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, TIM_BDTRInitStruct->AutomaticOutput);
   assert_param(IS_LL_TIM_BREAK_FILTER(TIM_BDTRInitStruct->BreakFilter));
   MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, TIM_BDTRInitStruct->BreakFilter);
 
diff --git a/Src/stm32l4xx_ll_usart.c b/Src/stm32l4xx_ll_usart.c
index 189b729..43fd33b 100644
--- a/Src/stm32l4xx_ll_usart.c
+++ b/Src/stm32l4xx_ll_usart.c
@@ -31,7 +31,7 @@
   * @{
   */
 
-#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5)
+#if defined(USART1) || defined(USART2) || defined(USART3) || defined(UART4) || defined(UART5)
 
 /** @addtogroup USART_LL
   * @{
@@ -40,6 +40,17 @@
 /* Private types -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Constants
+  * @{
+  */
+
+/* Definition of default baudrate value used for USART initialisation */
+#define USART_DEFAULT_BAUDRATE          (9600U)
+
+/**
+  * @}
+  */
+
 /* Private macros ------------------------------------------------------------*/
 /** @addtogroup USART_LL_Private_Macros
   * @{
@@ -290,9 +301,9 @@
     }
 
     /* Configure the USART Baud Rate :
-#if defined(USART_PRESC_PRESCALER)
+    #if defined(USART_PRESC_PRESCALER)
        - prescaler value is required
-#endif
+    #endif
        - valid baud rate value (different from 0) is required
        - Peripheral clock as returned by RCC service, should be valid (different from 0).
     */
@@ -338,7 +349,7 @@
 #if defined(USART_PRESC_PRESCALER)
   USART_InitStruct->PrescalerValue      = LL_USART_PRESCALER_DIV1;
 #endif /* USART_PRESC_PRESCALER */
-  USART_InitStruct->BaudRate            = 9600U;
+  USART_InitStruct->BaudRate            = USART_DEFAULT_BAUDRATE;
   USART_InitStruct->DataWidth           = LL_USART_DATAWIDTH_8B;
   USART_InitStruct->StopBits            = LL_USART_STOPBITS_1;
   USART_InitStruct->Parity              = LL_USART_PARITY_NONE ;
diff --git a/Src/stm32l4xx_ll_usb.c b/Src/stm32l4xx_ll_usb.c
index 2a81733..e50e787 100644
--- a/Src/stm32l4xx_ll_usb.c
+++ b/Src/stm32l4xx_ll_usb.c
@@ -27,7 +27,7 @@
                     ##### How to use this driver #####
   ==============================================================================
     [..]
-      (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+      (#) Fill parameters of Init structure in USB_CfgTypeDef structure.
 
       (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
 
@@ -296,9 +296,6 @@
   /* Restart the Phy Clock */
   USBx_PCGCCTL = 0U;
 
-  /* Device mode configuration */
-  USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
-
   /* Set Core speed to Full speed mode */
   (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL);
 
@@ -705,8 +702,21 @@
       */
       USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
       USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
-      USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT &
-                                     (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19));
+
+      if (epnum == 0U)
+      {
+        if (ep->xfer_len > ep->maxpacket)
+        {
+          ep->xfer_len = ep->maxpacket;
+        }
+
+        USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19));
+      }
+      else
+      {
+        USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT &
+                                       (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19));
+      }
 
       USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
 
@@ -750,18 +760,34 @@
     USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
     USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
 
-    if (ep->xfer_len == 0U)
+    if (epnum == 0U)
     {
-      USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+      if (ep->xfer_len > 0U)
+      {
+        ep->xfer_len = ep->maxpacket;
+      }
+
+      /* Store transfer size, for EP0 this is equal to endpoint max packet size */
+      ep->xfer_size = ep->maxpacket;
+
+      USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size);
       USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19));
     }
     else
     {
-      pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket);
-      ep->xfer_size = ep->maxpacket * pktcnt;
+      if (ep->xfer_len == 0U)
+      {
+        USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+        USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19));
+      }
+      else
+      {
+        pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket);
+        ep->xfer_size = ep->maxpacket * pktcnt;
 
-      USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19);
-      USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size;
+        USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19);
+        USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size;
+      }
     }
 
     if (ep->type == EP_TYPE_ISOC)
@@ -782,81 +808,6 @@
   return HAL_OK;
 }
 
-/**
-  * @brief  USB_EP0StartXfer : setup and starts a transfer over the EP  0
-  * @param  USBx  Selected device
-  * @param  ep pointer to endpoint structure
-  * @retval HAL status
-  */
-HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
-  uint32_t USBx_BASE = (uint32_t)USBx;
-  uint32_t epnum = (uint32_t)ep->num;
-
-  /* IN endpoint */
-  if (ep->is_in == 1U)
-  {
-    /* Zero Length Packet? */
-    if (ep->xfer_len == 0U)
-    {
-      USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
-      USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19));
-      USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
-    }
-    else
-    {
-      /* Program the transfer size and packet count
-      * as follows: xfersize = N * maxpacket +
-      * short_packet pktcnt = N + (short_packet
-      * exist ? 1 : 0)
-      */
-      USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
-      USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
-
-      if (ep->xfer_len > ep->maxpacket)
-      {
-        ep->xfer_len = ep->maxpacket;
-      }
-      USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19));
-      USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
-    }
-
-    /* EP enable, IN data in FIFO */
-    USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
-
-    /* Enable the Tx FIFO Empty Interrupt for this EP */
-    if (ep->xfer_len > 0U)
-    {
-      USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK);
-    }
-  }
-  else /* OUT endpoint */
-  {
-    /* Program the transfer size and packet count as follows:
-    * pktcnt = N
-    * xfersize = N * maxpacket
-    */
-    USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
-    USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
-
-    if (ep->xfer_len > 0U)
-    {
-      ep->xfer_len = ep->maxpacket;
-    }
-
-    /* Store transfer size, for EP0 this is equal to endpoint max packet size */
-    ep->xfer_size = ep->maxpacket;
-
-    USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19));
-    USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size);
-
-    /* EP enable */
-    USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
-  }
-
-  return HAL_OK;
-}
-
 
 /**
    * @brief  USB_EPStoptXfer  Stop transfer on an EP
@@ -1095,7 +1046,7 @@
   *          This parameter can be a value from 0 to 255
   * @retval HAL status
   */
-HAL_StatusTypeDef  USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address)
 {
   uint32_t USBx_BASE = (uint32_t)USBx;
 
@@ -1110,7 +1061,7 @@
   * @param  USBx  Selected device
   * @retval HAL status
   */
-HAL_StatusTypeDef  USB_DevConnect(USB_OTG_GlobalTypeDef *USBx)
+HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx)
 {
   uint32_t USBx_BASE = (uint32_t)USBx;
 
@@ -1127,7 +1078,7 @@
   * @param  USBx  Selected device
   * @retval HAL status
   */
-HAL_StatusTypeDef  USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx)
+HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx)
 {
   uint32_t USBx_BASE = (uint32_t)USBx;
 
@@ -1142,9 +1093,9 @@
 /**
   * @brief  USB_ReadInterrupts: return the global USB interrupt status
   * @param  USBx  Selected device
-  * @retval HAL status
+  * @retval USB Global Interrupt status
   */
-uint32_t  USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx)
+uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx)
 {
   uint32_t tmpreg;
 
@@ -1155,9 +1106,26 @@
 }
 
 /**
+  * @brief  USB_ReadChInterrupts: return USB channel interrupt status
+  * @param  USBx  Selected device
+  * @param  chnum Channel number
+  * @retval USB Channel Interrupt status
+  */
+uint32_t USB_ReadChInterrupts(USB_OTG_GlobalTypeDef *USBx, uint8_t chnum)
+{
+  uint32_t USBx_BASE = (uint32_t)USBx;
+  uint32_t tmpreg;
+
+  tmpreg = USBx_HC(chnum)->HCINT;
+  tmpreg &= USBx_HC(chnum)->HCINTMSK;
+
+  return tmpreg;
+}
+
+/**
   * @brief  USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
   * @param  USBx  Selected device
-  * @retval HAL status
+  * @retval USB Device OUT EP interrupt status
   */
 uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx)
 {
@@ -1173,7 +1141,7 @@
 /**
   * @brief  USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
   * @param  USBx  Selected device
-  * @retval HAL status
+  * @retval USB Device IN EP interrupt status
   */
 uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx)
 {
@@ -1255,7 +1223,7 @@
   * @param  USBx  Selected device
   * @retval HAL status
   */
-HAL_StatusTypeDef  USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx)
+HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx)
 {
   uint32_t USBx_BASE = (uint32_t)USBx;
 
@@ -1372,7 +1340,7 @@
   /* Clear all pending HC Interrupts */
   for (i = 0U; i < cfg.Host_channels; i++)
   {
-    USBx_HC(i)->HCINT = 0xFFFFFFFFU;
+    USBx_HC(i)->HCINT = CLEAR_INTERRUPT_MASK;
     USBx_HC(i)->HCINTMSK = 0U;
   }
 
@@ -1380,7 +1348,7 @@
   USBx->GINTMSK = 0U;
 
   /* Clear any pending interrupts */
-  USBx->GINTSTS = 0xFFFFFFFFU;
+  USBx->GINTSTS = CLEAR_INTERRUPT_MASK;
 
   /* set Rx FIFO size */
   USBx->GRXFSIZ  = 0x80U;
@@ -1416,15 +1384,15 @@
 
   if (freq == HCFG_48_MHZ)
   {
-    USBx_HOST->HFIR = 48000U;
+    USBx_HOST->HFIR = HFIR_48_MHZ;
   }
   else if (freq == HCFG_6_MHZ)
   {
-    USBx_HOST->HFIR = 6000U;
+    USBx_HOST->HFIR = HFIR_6_MHZ;
   }
   else
   {
-    /* ... */
+    return HAL_ERROR;
   }
 
   return HAL_OK;
@@ -1493,7 +1461,7 @@
   *            @arg HCD_SPEED_FULL: Full speed mode
   *            @arg HCD_SPEED_LOW: Low speed mode
   */
-uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx)
+uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx)
 {
   uint32_t USBx_BASE = (uint32_t)USBx;
   __IO uint32_t hprt0 = 0U;
@@ -1507,7 +1475,7 @@
   * @param  USBx  Selected device
   * @retval current frame number
   */
-uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx)
+uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx)
 {
   uint32_t USBx_BASE = (uint32_t)USBx;
 
@@ -1548,7 +1516,7 @@
   uint32_t HostCoreSpeed;
 
   /* Clear old interrupt conditions for this host channel. */
-  USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU;
+  USBx_HC((uint32_t)ch_num)->HCINT = CLEAR_INTERRUPT_MASK;
 
   /* Enable channel interrupts required for this transfer. */
   switch (ep_type)
@@ -1635,7 +1603,8 @@
   USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) |
                                       ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) |
                                       (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) |
-                                      ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed;
+                                      ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) |
+                                      USB_OTG_HCCHAR_MC_0 | HCcharEpDir | HCcharLowSpeed;
 
   if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC))
   {
@@ -1659,7 +1628,7 @@
   uint8_t  is_oddframe;
   uint16_t len_words;
   uint16_t num_packets;
-  uint16_t max_hc_pkt_count = 256U;
+  uint16_t max_hc_pkt_count = HC_MAX_PKT_CNT;
 
   /* Compute the expected number of packets associated to the transfer */
   if (hc->xfer_len > 0U)
@@ -1782,9 +1751,14 @@
   __IO uint32_t count = 0U;
   uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18;
   uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31;
+  uint32_t SplitEna = (USBx_HC(hcnum)->HCSPLT & USB_OTG_HCSPLT_SPLITEN) >> 31;
 
-  if (((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) &&
-      (ChannelEna == 0U))
+  /* In buffer DMA, Channel disable must not be programmed for non-split periodic channels.
+     At the end of the next uframe/frame (in the worst case), the core generates a channel halted
+     and disables the channel automatically. */
+
+  if ((((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) && (SplitEna == 0U)) &&
+      ((ChannelEna == 0U) || (((HcEpType == HCCHAR_ISOC) || (HcEpType == HCCHAR_INTR)))))
   {
     return HAL_OK;
   }
@@ -1930,8 +1904,8 @@
   }
 
   /* Clear any pending Host interrupts */
-  USBx_HOST->HAINT = 0xFFFFFFFFU;
-  USBx->GINTSTS = 0xFFFFFFFFU;
+  USBx_HOST->HAINT = CLEAR_INTERRUPT_MASK;
+  USBx->GINTSTS = CLEAR_INTERRUPT_MASK;
 
   (void)USB_EnableGlobalInt(USBx);
 
@@ -2099,7 +2073,7 @@
             15 means Flush all Tx FIFOs
   * @retval HAL status
   */
-HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num)
+HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef const *USBx, uint32_t num)
 {
   /* Prevent unused argument(s) compilation warning */
   UNUSED(USBx);
@@ -2118,7 +2092,7 @@
   * @param  USBx : Selected device
   * @retval HAL status
   */
-HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx)
+HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef const *USBx)
 {
   /* Prevent unused argument(s) compilation warning */
   UNUSED(USBx);
@@ -2131,6 +2105,7 @@
   return HAL_OK;
 }
 
+
 #if defined (HAL_PCD_MODULE_ENABLED)
 /**
   * @brief  Activate and configure an endpoint
@@ -2708,9 +2683,9 @@
 /**
   * @brief  USB_ReadInterrupts return the global USB interrupt status
   * @param  USBx Selected device
-  * @retval HAL status
+  * @retval USB Global Interrupt status
   */
-uint32_t  USB_ReadInterrupts(USB_TypeDef *USBx)
+uint32_t USB_ReadInterrupts(USB_TypeDef const *USBx)
 {
   uint32_t tmpreg;
 
@@ -2855,7 +2830,7 @@
   * @param   wNBytes no. of bytes to be copied.
   * @retval None
   */
-void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+void USB_WritePMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
 {
   uint32_t n = ((uint32_t)wNBytes + 1U) >> 1;
   uint32_t BaseAddr = (uint32_t)USBx;
@@ -2890,7 +2865,7 @@
   * @param   wNBytes no. of bytes to be copied.
   * @retval None
   */
-void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+void USB_ReadPMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
 {
   uint32_t n = (uint32_t)wNBytes >> 1;
   uint32_t BaseAddr = (uint32_t)USBx;
@@ -2921,8 +2896,8 @@
     *pBuf = (uint8_t)((RdVal >> 0) & 0xFFU);
   }
 }
-#endif /* defined (USB) */
 
+#endif /* defined (USB) */
 /**
   * @}
   */