/**
  ******************************************************************************
  * @file    stm32l5xx_hal_opamp.h
  * @author  MCD Application Team
  * @brief   Header file of OPAMP HAL module.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32L5xx_HAL_OPAMP_H
#define STM32L5xx_HAL_OPAMP_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32l5xx_hal_def.h"

/** @addtogroup STM32L5xx_HAL_Driver
  * @{
  */

/** @addtogroup OPAMP
  * @{
  */

/* Exported types ------------------------------------------------------------*/

/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
  * @{
  */

/**
  * @brief  OPAMP Init structure definition
  */

typedef struct
{
  uint32_t PowerSupplyRange;            /*!< Specifies the power supply range: above or under 2.4V.
                                             This parameter must be a value of @ref OPAMP_PowerSupplyRange
                                             Caution: This parameter is common to all OPAMP instances: a modification of this parameter for the selected OPAMP impacts the other OPAMP instances. */

  uint32_t PowerMode;                   /*!< Specifies the power mode Normal or Low-Power.
                                             This parameter must be a value of @ref OPAMP_PowerMode */

  uint32_t Mode;                        /*!< Specifies the OPAMP mode
                                             This parameter must be a value of @ref OPAMP_Mode
                                             mode is either Standalone, - Follower or PGA */

  uint32_t InvertingInput;              /*!< Specifies the inverting input in Standalone & PGA modes
                                               - In Standalone mode:   i.e. when mode is OPAMP_STANDALONE_MODE
                                                 & PGA mode:           i.e. when mode is OPAMP_PGA_MODE
                                                 This parameter must be a value of @ref OPAMP_InvertingInput
                                               - In Follower mode    i.e. when mode is OPAMP_FOLLOWER_MODE
                                                 This parameter is Not Applicable */

  uint32_t NonInvertingInput;           /*!< Specifies the non inverting input of the opamp:
                                             This parameter must be a value of @ref OPAMP_NonInvertingInput */

  uint32_t PgaGain;                     /*!< Specifies the gain in PGA mode
                                             i.e. when mode is OPAMP_PGA_MODE.
                                             This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */

  uint32_t UserTrimming;                /*!< Specifies the trimming mode
                                             This parameter must be a value of @ref OPAMP_UserTrimming
                                             UserTrimming is either factory or user trimming.*/

  uint32_t TrimmingValueP;              /*!< Specifies the offset trimming value (PMOS)
                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER.
                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31
                                             16 is typical default value */

  uint32_t TrimmingValueN;              /*!< Specifies the offset trimming value (NMOS)
                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER.
                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31
                                             16 is typical default value */

  uint32_t TrimmingValuePLowPower;      /*!< Specifies the offset trimming value (PMOS)
                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER.
                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31
                                             16 is typical default value */

  uint32_t TrimmingValueNLowPower;      /*!< Specifies the offset trimming value (NMOS)
                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER.
                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31
                                             16 is typical default value */

}OPAMP_InitTypeDef;

/**
  * @brief  HAL State structures definition
  */

typedef enum
{
  HAL_OPAMP_STATE_RESET               = 0x00000000, /*!< OPAMP is not yet Initialized          */

  HAL_OPAMP_STATE_READY               = 0x00000001, /*!< OPAMP is initialized and ready for use */
  HAL_OPAMP_STATE_CALIBBUSY           = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */

  HAL_OPAMP_STATE_BUSY                = 0x00000004, /*!< OPAMP is enabled and running in normal mode */
  HAL_OPAMP_STATE_BUSYLOCKED          = 0x00000005  /*!< OPAMP is locked
                                                         only system reset allows reconfiguring the opamp. */

}HAL_OPAMP_StateTypeDef;

/**
  * @brief OPAMP Handle Structure definition
  */

#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
typedef struct __OPAMP_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
{
  OPAMP_TypeDef       *Instance;                    /*!< OPAMP instance's registers base address   */
  OPAMP_InitTypeDef   Init;                         /*!< OPAMP required parameters */
  HAL_StatusTypeDef   Status;                       /*!< OPAMP peripheral status   */
  HAL_LockTypeDef     Lock;                         /*!< Locking object          */
  __IO HAL_OPAMP_StateTypeDef  State;               /*!< OPAMP communication state */

#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
void (* MspInitCallback)                (struct __OPAMP_HandleTypeDef *hopamp);
void (* MspDeInitCallback)              (struct __OPAMP_HandleTypeDef *hopamp);
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */

}OPAMP_HandleTypeDef;

/**
  * @brief HAl_OPAMP_TrimmingValueTypeDef definition
  */

typedef  uint32_t HAL_OPAMP_TrimmingValueTypeDef;

#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
/**
  * @brief  HAL OPAMP Callback ID enumeration definition
  */
typedef enum
{
  HAL_OPAMP_MSPINIT_CB_ID                      = 0x01U,  /*!< OPAMP MspInit Callback ID           */
  HAL_OPAMP_MSPDEINIT_CB_ID                    = 0x02U,  /*!< OPAMP MspDeInit Callback ID         */
  HAL_OPAMP_ALL_CB_ID                          = 0x03U   /*!< OPAMP All ID                        */
}HAL_OPAMP_CallbackIDTypeDef;

/**
  * @brief  HAL OPAMP Callback pointer definition
  */
typedef void (*pOPAMP_CallbackTypeDef)(OPAMP_HandleTypeDef *hopamp);
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */

/**
  * @}
  */


/* Exported constants --------------------------------------------------------*/

/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
  * @{
  */

/** @defgroup OPAMP_Mode OPAMP Mode
  * @{
  */
#define OPAMP_STANDALONE_MODE            0x00000000U            /*!< standalone mode */
#define OPAMP_PGA_MODE                   OPAMP_CSR_OPAMODE_1    /*!< PGA mode */
#define OPAMP_FOLLOWER_MODE              OPAMP_CSR_OPAMODE      /*!< follower mode */

/**
  * @}
  */

/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
  * @{
  */

#define OPAMP_NONINVERTINGINPUT_IO0         0x00000000U            /*!< OPAMP non-inverting input connected to dedicated IO pin */
#define OPAMP_NONINVERTINGINPUT_DAC_CH      OPAMP_CSR_VPSEL        /*!< OPAMP non-inverting input connected internally to DAC channel */

/**
  * @}
  */

/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
  * @{
  */

#define OPAMP_INVERTINGINPUT_IO0              0x00000000U             /*!< OPAMP inverting input connected to dedicated IO pin low-leakage */
#define OPAMP_INVERTINGINPUT_IO1              OPAMP_CSR_VMSEL_0       /*!< OPAMP inverting input connected to alternative IO pin available on some device packages */
#define OPAMP_INVERTINGINPUT_CONNECT_NO       OPAMP_CSR_VMSEL_1       /*!< OPAMP inverting input not connected externally (PGA mode only) */

/**
  * @}
  */

/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
  * @{
  */

#define OPAMP_PGA_GAIN_2                0x00000000U                                   /*!< PGA gain =  2 */
#define OPAMP_PGA_GAIN_4                OPAMP_CSR_PGGAIN_0                            /*!< PGA gain =  4 */
#define OPAMP_PGA_GAIN_8                OPAMP_CSR_PGGAIN_1                            /*!< PGA gain =  8 */
#define OPAMP_PGA_GAIN_16              (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1)      /*!< PGA gain = 16 */

/**
  * @}
  */

/** @defgroup OPAMP_PowerMode OPAMP PowerMode
  * @{
  */
#define OPAMP_POWERMODE_NORMALPOWER   0x00000000U              /*!< OPAMP power mode normal */   
#define OPAMP_POWERMODE_LOWPOWER      OPAMP_CSR_OPALPM         /*!< OPAMP power mode low-power */

/**
  * @}
  */

/** @defgroup OPAMP_PowerSupplyRange OPAMP PowerSupplyRange
  * @{
  */
#define OPAMP_POWERSUPPLY_LOW          0x00000000U             /*!< Power supply range low (VDDA lower than 2.4V) */
#define OPAMP_POWERSUPPLY_HIGH         OPAMP1_CSR_OPARANGE     /*!< Power supply range high (VDDA higher than 2.4V) */

/**
  * @}
  */

/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
  * @{
  */
#define OPAMP_TRIMMING_FACTORY        0x00000000U                                     /*!< Factory trimming */
#define OPAMP_TRIMMING_USER           OPAMP_CSR_USERTRIM                              /*!< User trimming */

/**
  * @}
  */

/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
  * @{
  */
#define OPAMP_FACTORYTRIMMING_DUMMY    0xFFFFFFFFU                 /*!< Dummy value if trimming value could not be retrieved */
#define OPAMP_FACTORYTRIMMING_N        0U                          /*!< Offset trimming N */
#define OPAMP_FACTORYTRIMMING_P        1U                          /*!< Offset trimming P */

/**
  * @}
  */

 /**
  * @}
  */

/* Private constants ---------------------------------------------------------*/
/** @defgroup OPAMP_Private_Constants OPAMP Private Constants
  * @brief   OPAMP Private constants and defines
  * @{
  */

/* NONINVERTING bit position in OTR & LPOTR */
#define OPAMP_INPUT_NONINVERTING              ((uint32_t) 8) /*!< Non inverting input */

/* Offset trimming time: during calibration, minimum time needed between two  */
/* steps to have 1 mV accuracy.                                               */
/* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=1ms.*/
/* Unit: ms.                                                                  */
#define OPAMP_TRIMMING_DELAY               ((uint32_t) 1)

/**
  * @}
  */

/* Exported macros -----------------------------------------------------------*/
/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
  * @{
  */

/** @brief Reset OPAMP handle state.
  * @param  __HANDLE__ OPAMP handle.
  * @retval None
  */
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__)           do {                                              \
                                                                 (__HANDLE__)->State = HAL_OPAMP_STATE_RESET; \
                                                                 (__HANDLE__)->MspInitCallback = NULL;       \
                                                                 (__HANDLE__)->MspDeInitCallback = NULL;     \
                                                               } while(0)
#else
#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */


/**
  * @}
  */

/* Private macro -------------------------------------------------------------*/

/** @defgroup OPAMP_Private_Macros OPAMP Private Macros
  * @{
  */

#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
                                               ((INPUT) == OPAMP_PGA_MODE) || \
                                               ((INPUT) == OPAMP_FOLLOWER_MODE))

#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
                                                    ((INPUT) == OPAMP_INVERTINGINPUT_IO1))

#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH))

#define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
                                             ((INPUT) == OPAMP_INVERTINGINPUT_IO1) || \
                                             ((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO))

#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
                                 ((GAIN) == OPAMP_PGA_GAIN_4) || \
                                 ((GAIN) == OPAMP_PGA_GAIN_8) || \
                                 ((GAIN) == OPAMP_PGA_GAIN_16))

#define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMAL) || \
                                      ((TRIMMING) == OPAMP_POWERMODE_LOWPOWER) )

#define IS_OPAMP_POWER_SUPPLY_RANGE(RANGE) (((RANGE) == OPAMP_POWERSUPPLY_LOW) || \
                                            ((RANGE) == OPAMP_POWERSUPPLY_HIGH)  )

#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
                                     ((TRIMMING) == OPAMP_TRIMMING_USER))


#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 31U)

#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
                                             ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))

/**
  * @}
  */

/* Include OPAMP HAL Extended module */
#include "stm32l5xx_hal_opamp_ex.h"

/* Exported functions --------------------------------------------------------*/
/** @addtogroup OPAMP_Exported_Functions
  * @{
  */

/** @addtogroup OPAMP_Exported_Functions_Group1
  * @{
  */
/* Initialization/de-initialization functions  **********************************/
HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
/**
  * @}
  */

/** @addtogroup OPAMP_Exported_Functions_Group2
  * @{
  */

/* I/O operation functions  *****************************************************/
HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp);

/**
  * @}
  */

/** @addtogroup OPAMP_Exported_Functions_Group3
  * @{
  */

/* Peripheral Control functions  ************************************************/
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
/* OPAMP callback registering/unregistering */
HAL_StatusTypeDef HAL_OPAMP_RegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackID, pOPAMP_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_OPAMP_UnRegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */

HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);

/**
  * @}
  */

/** @addtogroup OPAMP_Exported_Functions_Group4
  * @{
  */

/* Peripheral State functions  **************************************************/
HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* STM32L5xx_HAL_OPAMP_H */