/**
  ******************************************************************************
  * @file    stm32l5xx_hal_timebase_rtc_wakeup_template.c
  * @author  MCD Application Team
  * @brief   HAL time base based on the hardware RTC_WAKEUP Template.
  *
  *          This file overrides the native HAL time base functions (defined as weak)
  *          to use the RTC WAKEUP for the time base generation:
  *           + Initializes the RTC peripheral and configures the wakeup timer to be
  *             incremented each 1ms when uwTickFreq is set to default value, else
  *              10 ms or 100 ms, depending of above global variable value.
  *           + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback
  *           + HSE (default), LSE or LSI can be selected as RTC clock source
  *
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
 @verbatim
  ==============================================================================
                        ##### How to use this driver #####
  ==============================================================================
    [..]
    This file must be copied to the application folder and modified as follows:
    (#) Rename it to 'stm32l5xx_hal_timebase_rtc_wakeup.c'
    (#) Add this file and the RTC HAL drivers to your project and uncomment
       HAL_RTC_MODULE_ENABLED define in stm32l5xx_hal_conf.h

  @endverbatim
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32l5xx_hal.h"

/** @addtogroup STM32L5xx_HAL_Driver
  * @{
  */

/** @defgroup HAL_TimeBase_RTC_WakeUp_Template  HAL TimeBase RTC WakeUp Template
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/

/* Uncomment the line below to select the appropriate RTC Clock source for your application:
  + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision.
  + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing
                          precision.
  + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing
                          precision.
  */
#define RTC_CLOCK_SOURCE_HSE
/* #define RTC_CLOCK_SOURCE_LSE */
/* #define RTC_CLOCK_SOURCE_LSI */

#ifdef RTC_CLOCK_SOURCE_HSE
#define RTC_ASYNCH_PREDIV       99U
#define RTC_SYNCH_PREDIV        4U
#else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */
#define RTC_ASYNCH_PREDIV       31U
#define RTC_SYNCH_PREDIV        0U
#endif /* RTC_CLOCK_SOURCE_HSE */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
RTC_HandleTypeDef hRTC_Handle = {.Init = {0}};

/* Private function prototypes -----------------------------------------------*/
void RTC_IRQHandler(void);

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  This function configures the RTC wakeup timer as a time base source.
  *         The time source is configured  to have 1ms time base with a dedicated
  *         Tick interrupt priority.
  *         Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK
                             = 1ms
  *         Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1)
                        = 1 ms
  * @note   This function is called  automatically at the beginning of program after
  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
  * @param  TickPriority Tick interrupt priority.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
  HAL_StatusTypeDef status = HAL_OK;
  __IO uint32_t counter = 0U;

  RCC_OscInitTypeDef        RCC_OscInitStruct;
  RCC_PeriphCLKInitTypeDef  PeriphClkInitStruct;


  /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/
  if ((uint32_t)uwTickFreq != 0U)
  {
#ifdef RTC_CLOCK_SOURCE_LSE
    /* Configue LSE as RTC clock source */
    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
    RCC_OscInitStruct.LSEState = RCC_LSE_ON_RTC_ONLY;
    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;

    PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
#elif defined (RTC_CLOCK_SOURCE_LSI)
    /* Configue LSI as RTC clock source */
    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI;
    RCC_OscInitStruct.LSIState = RCC_LSI_ON;
    RCC_OscInitStruct.LSIDiv = RCC_LSI_DIV1;
    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;

    PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
#elif defined (RTC_CLOCK_SOURCE_HSE)
    /* Configue HSE as RTC clock source */
    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;

    PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32;
#else
#error Please select the RTC Clock source
#endif /* RTC_CLOCK_SOURCE_LSE */

    status = HAL_RCC_OscConfig(&RCC_OscInitStruct);
    if(status == HAL_OK)
    {
      PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
      status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);

      /* Enable RTC Clock */
      if(status == HAL_OK)
      {
        /* Enable RTC Clock */
        __HAL_RCC_RTC_ENABLE();
        __HAL_RCC_RTCAPB_CLK_ENABLE();

        /* The time base should be 1ms
           Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK
           HSE as RTC clock
             Time base = ((99 + 1) * (4 + 1)) / 500kHz
                       = 1ms
           LSE as RTC clock
             Time base = ((31 + 1) * (0 + 1)) / 32.768kHz
                       = ~1ms
           LSI as RTC clock
             Time base = ((31 + 1) * (0 + 1)) / 32kHz
                       = 1ms
        */
        hRTC_Handle.Instance = RTC;
        hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24;
        hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV;
        hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV;
        hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE;
        hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
        hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
        status = HAL_RTC_Init(&hRTC_Handle);
        if(status == HAL_OK)
        {
          /* Disable the write protection for RTC registers */
          __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle);

          /* Disable the Wake-up Timer */
          __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle);

          /* In case of interrupt mode is used, the interrupt source must disabled */
          __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT);

          /* Wait till RTC WUTWF flag is set  */
          while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(&hRTC_Handle, RTC_FLAG_WUTWF) == 0U)
          {
            if (counter++ == (SystemCoreClock / 56U))
            {
              status = HAL_ERROR;
              break;
            }
          }

          if(status == HAL_OK)
          {
            /* Clear PWR wake up Flag */
            __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);

            /* Clear RTC Wake Up timer Flag */
            __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_WUTF);

            /* Configure the Wake-up Timer counter */
            hRTC_Handle.Instance->WUTR = 0U;

            /* Clear the Wake-up Timer clock source bits in CR register */
            hRTC_Handle.Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;

            /* Configure the clock source */
            hRTC_Handle.Instance->CR |= (uint32_t)RTC_WAKEUPCLOCK_CK_SPRE_16BITS;

            /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
            __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();

            /* Configure the Interrupt in the RTC_CR register */
            __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT);

            /* Enable the Wake-up Timer */
            __HAL_RTC_WAKEUPTIMER_ENABLE(&hRTC_Handle);

            /* Enable the write protection for RTC registers */
            __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle);

            HAL_NVIC_EnableIRQ(RTC_IRQn);

            /* Configure the SysTick IRQ priority */
            if (TickPriority < (1UL << __NVIC_PRIO_BITS))
            {
              HAL_NVIC_SetPriority(RTC_IRQn, TickPriority, 0U);
              uwTickPrio = TickPriority;
            }
            else
            {
              status = HAL_ERROR;
            }
          }
        }
      }
    }
  }
  else
  {
    status = HAL_ERROR;
  }
  return status;
}

/**
  * @brief  Suspend Tick increment.
  * @note   Disable the tick increment by disabling RTC interrupt.
  * @retval None
  */
void HAL_SuspendTick(void)
{
  /* Disable the write protection for RTC registers */
  __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle);
  /* Disable RTC WAKE UP TIMER Interrupt */
  __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT);
  /* Enable the write protection for RTC registers */
  __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle);
}

/**
  * @brief  Resume Tick increment.
  * @note   Enable the tick increment by enabling RTC interrupt.
  * @retval None
  */
void HAL_ResumeTick(void)
{
  /* Disable the write protection for RTC registers */
  __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle);
  /* Enable RTC WAKE UP TIMER  interrupt */
  __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT);
  /* Enable the write protection for RTC registers */
  __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle);
}

/**
  * @brief  Wake Up Timer Event Callback in non blocking mode
  * @note   This function is called  when RTC interrupt took place, inside
  * RTC_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
  * a global variable "uwTick" used as application time base.
  * @param  hrtc : RTC handle
  * @retval None
  */
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hrtc);

  HAL_IncTick();
}

/**
  * @brief  This function handles RTC WAKE UP TIMER interrupt request.
  * @retval None
  */
void RTC_IRQHandler(void)
{
  HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle);
}

/**
  * @}
  */

/**
  * @}
  */