/**
  ******************************************************************************
  * @file    stm32wbxx_hal_tim_ex.h
  * @author  MCD Application Team
  * @brief   Header file of TIM HAL Extended module.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WBxx_HAL_TIM_EX_H
#define STM32WBxx_HAL_TIM_EX_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32wbxx_hal_def.h"

/** @addtogroup STM32WBxx_HAL_Driver
  * @{
  */

/** @addtogroup TIMEx
  * @{
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
  * @{
  */

/**
  * @brief  TIM Hall sensor Configuration Structure definition
  */

typedef struct
{
  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */

  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */

  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */

  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef;

/**
  * @brief  TIM Break/Break2 input configuration
  */
typedef struct
{
  uint32_t Source;         /*!< Specifies the source of the timer break input.
                                This parameter can be a value of @ref TIMEx_Break_Input_Source */
  uint32_t Enable;         /*!< Specifies whether or not the break input source is enabled.
                                This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
  uint32_t Polarity;       /*!< Specifies the break input source polarity.
                                This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */
} TIMEx_BreakInputConfigTypeDef;

/**
  * @}
  */
/* End of exported types -----------------------------------------------------*/

/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
  * @{
  */

/** @defgroup TIMEx_Remap TIM Extended Remapping
  * @{
  */
#define TIM_TIM1_ETR_GPIO           0x00000000U                                           /* !< TIM1_ETR is not connected to I/O      */
#define TIM_TIM1_ETR_ADC1_AWD1      TIM1_OR_ETR_ADC1_RMP_0                                /* !< TIM1_ETR is connected to ADC1 AWD1    */
#if defined(ADC_SUPPORT_5_MSPS)
#define TIM_TIM1_ETR_ADC1_AWD2      TIM1_OR_ETR_ADC1_RMP_1                                /* !< TIM1_ETR is connected to ADC1 AWD2    */
#define TIM_TIM1_ETR_ADC1_AWD3      (TIM1_OR_ETR_ADC1_RMP_0 | TIM1_OR_ETR_ADC1_RMP_1)     /* !< TIM1_ETR is connected to ADC1 AWD3    */
#endif
#if defined(COMP1)
#define TIM_TIM1_ETR_COMP1          TIM1_AF1_ETRSEL_0                                     /* !< TIM1_ETR is connected to COMP1 output */
#endif /* COMP1 */
#if defined(COMP2)
#define TIM_TIM1_ETR_COMP2          TIM1_AF1_ETRSEL_1                                     /* !< TIM1_ETR is connected to COMP2 output */
#endif /* COMP2 */

#define TIM_TIM1_TI1_GPIO           0x00000000U                                           /* !< TIM1 Input capture 1 is connected to I/0      */
#define TIM_TIM1_TI1_COMP1         TIM1_OR_TI1_RMP                                        /* !< TIM1 Input capture 1is connected to COMP1 OUT */

#define TIM_TIM2_ITR_NC             0x00000000U                                           /* !< TIM2 Internal trigger ITR is not connected          */
#if defined(USB)
#define TIM_TIM2_ITR_USB            TIM2_OR_ITR1_RMP                                      /* !< TIM2 Internal trigger ITR is connected to USBFS SOF */
#endif /* USB */

#define TIM_TIM2_ETR_GPIO           0x00000000U                                           /* !< TIM2 External trigger ETR is connected to I/O */
#define TIM_TIM2_ETR_LSE            TIM2_OR_ETR_RMP                                       /* !< TIM2 External trigger ETR is connected to LSE */
#if defined(COMP1)
#define TIM_TIM2_ETR_COMP1          TIM2_AF1_ETRSEL_0                                     /* !< TIM2_ETR is connected to COMP1 output         */
#endif /* COMP1 */
#if defined(COMP2)
#define TIM_TIM2_ETR_COMP2          TIM2_AF1_ETRSEL_1                                     /* !< TIM2_ETR is connected to COMP2 output         */
#endif /* COMP2 */

#define TIM_TIM2_TI4_GPIO           0x00000000U                                           /* !< TIM2_TI4 is connected to I/O                 */
#if defined(COMP1)
#define TIM_TIM2_TI4_COMP1          TIM2_OR_TI4_RMP_0                                     /* !< TIM2_TI4 is connected to COMP1 OUT           */
#endif /* COMP1 */
#if defined(COMP2)
#define TIM_TIM2_TI4_COMP2          TIM2_OR_TI4_RMP_1                                     /* !< TIM2_TI4 is connected to COMP1 OUT           */
#endif /* COMP2 */
#if defined(COMP1) && defined(COMP2)
#define TIM_TIM2_TI4_COMP1_COMP2    (TIM2_OR_TI4_RMP_0 | TIM2_OR_TI4_RMP_1)               /* !< TIM2_TI4 is connected to COMP1 and COMP2 OUT */
#endif /* COMP1 && COMP2 */

#if defined(TIM16)
#define TIM_TIM16_TI1_GPIO          0x00000000U                                           /* !< TIM16_TI1 is connected to I/O       */
#define TIM_TIM16_TI1_LSI           TIM16_OR_TI1_RMP_0                                    /* !< TIM16_TI1 is connected to LSI Clock */
#define TIM_TIM16_TI1_LSE           TIM16_OR_TI1_RMP_1                                    /* !< TIM16_TI1 is connected to LSE Clock */
#define TIM_TIM16_TI1_RTC           (TIM16_OR_TI1_RMP_0 | TIM16_OR_TI1_RMP_1)             /* !< TIM16_TI1 is connected to RTC       */
#endif /* TIM16 */

#if defined(TIM17)
#define TIM_TIM17_TI1_GPIO          0x00000000U                                           /* !< TIM17_TI1 is connected to I/O       */
#define TIM_TIM17_TI1_MSI           TIM17_OR_TI1_RMP_0                                    /* !< TIM17_TI1 is connected to MSI       */
#define TIM_TIM17_TI1_HSE           TIM17_OR_TI1_RMP_1                                    /* !< TIM17_TI1 is connected to HSE/32    */
#define TIM_TIM17_TI1_MCO           (TIM17_OR_TI1_RMP_0 | TIM17_OR_TI1_RMP_1)             /* !< TIM17_TI1 is connected to MCO       */
#endif /* TIM17 */
/**
  * @}
  */

/** @defgroup TIMEx_Break_Input TIM Extended Break input
  * @{
  */
#define TIM_BREAKINPUT_BRK     0x00000001U                                      /*!< Timer break input  */
#define TIM_BREAKINPUT_BRK2    0x00000002U                                      /*!< Timer break2 input */
/**
  * @}
  */

/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
  * @{
  */
#define TIM_BREAKINPUTSOURCE_BKIN     0x00000001U                               /* !< An external source (GPIO) is connected to the BKIN pin  */
#if defined(COMP1)
#define TIM_BREAKINPUTSOURCE_COMP1    0x00000002U                               /* !< The COMP1 output is connected to the break input */
#endif /* COMP1 */
#if defined(COMP2)
#define TIM_BREAKINPUTSOURCE_COMP2    0x00000004U                               /* !< The COMP2 output is connected to the break input */
#endif /* COMP2 */
/**
  * @}
  */

/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
  * @{
  */
#define TIM_BREAKINPUTSOURCE_DISABLE     0x00000000U                            /*!< Break input source is disabled */
#define TIM_BREAKINPUTSOURCE_ENABLE      0x00000001U                            /*!< Break input source is enabled */
/**
  * @}
  */

/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
  * @{
  */
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW     0x00000001U                       /*!< Break input source is active low */
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH    0x00000000U                       /*!< Break input source is active_high */
/**
  * @}
  */

/**
  * @}
  */
/* End of exported constants -------------------------------------------------*/

/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
  * @{
  */

/**
  * @}
  */
/* End of exported macro -----------------------------------------------------*/

/* Private macro -------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
  * @{
  */
#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx)
#define IS_TIM_REMAP(__INSTANCE__, __REMAP__)                                        \
  ((((__INSTANCE__) == TIM1)  && ((((__REMAP__) & 0xFFFE3FECU) == 0x00000000U)))     \
   || (((__INSTANCE__) == TIM2)  && ((((__REMAP__) & 0xFFFE3FF0U) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM16) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM17) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))))
#elif defined(STM32WB10xx)
#define IS_TIM_REMAP(__INSTANCE__, __REMAP__)                                             \
  ((((__INSTANCE__) == TIM1)  && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM2)  && ((((__REMAP__) & 0xFFFFFFFDU) == 0x00000000U))))
#elif defined(STM32WB15xx)
#define IS_TIM_REMAP(__INSTANCE__, __REMAP__)                                             \
  ((((__INSTANCE__) == TIM1)  && ((((__REMAP__) & 0xFFFF3FECU) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM2)  && ((((__REMAP__) & 0xFFFF3FF0U) == 0x00000000U))))
#else
#define IS_TIM_REMAP(__INSTANCE__, __REMAP__)                                             \
  ((((__INSTANCE__) == TIM1)  && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM2)  && ((((__REMAP__) & 0xFFFFFFF0U) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM16) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))  \
   || (((__INSTANCE__) == TIM17) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))))
#endif

#define IS_TIM_BREAKINPUT(__BREAKINPUT__)       \
  (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK)  || \
   ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))

#if defined(COMP1)
#if defined(COMP2)
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__)        \
  (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)  || \
   ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
   ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2))
#else
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__)          \
  (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN))
#endif
#else
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__)                \
  (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN))
#endif

#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__)     \
  (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE)  || \
   ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))

#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__)       \
  (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW)  || \
   ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))

/**
  * @}
  */
/* End of private macro ------------------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
  * @{
  */

/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
  *  @brief    Timer Hall Sensor functions
  * @{
  */
/*  Timer Hall Sensor functions  **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);

void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);

/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
  *  @brief   Timer Complementary Output Compare functions
  * @{
  */
/*  Timer Complementary Output Compare functions  *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
  *  @brief    Timer Complementary PWM functions
  * @{
  */
/*  Timer Complementary PWM functions  ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
  *  @brief    Timer Complementary One Pulse functions
  * @{
  */
/*  Timer Complementary One Pulse functions  **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
  *  @brief    Peripheral Control functions
  * @{
  */
/* Extended Control functions  ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
                                              uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
                                                 uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
                                                  uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
                                                        TIM_MasterConfigTypeDef *sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
                                                TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
                                             TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);

HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
  * @brief    Extended Callbacks functions
  * @{
  */
/* Extended Callback **********************************************************/
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
  * @brief    Extended Peripheral State functions
  * @{
  */
/* Extended Peripheral State functions  ***************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim,  uint32_t ChannelN);
/**
  * @}
  */

/**
  * @}
  */
/* End of exported functions -------------------------------------------------*/

/* Private functions----------------------------------------------------------*/
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
  * @{
  */
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
/**
  * @}
  */
/* End of private functions --------------------------------------------------*/

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif


#endif /* STM32WBxx_HAL_TIM_EX_H */