/**
  ******************************************************************************
  * @file    stm32wbxx_hal_adc_ex.c
  * @author  MCD Application Team
  * @brief   This file provides firmware functions to manage the following
  *          functionalities of the Analog to Digital Converter (ADC)
  *          peripheral:
  *           + Operation functions
  *             ++ Start, stop, get result of conversions of ADC group injected,
  *                using 2 possible modes: polling, interruption (not available on devices: STM32WB10xx, STM32WB15xx).
  *             ++ Calibration
  *               +++ ADC automatic self-calibration
  *               +++ Calibration factors get or set
  *           + Control functions
  *             ++ Channels configuration on ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx)
  *           + State functions
  *             ++ ADC group injected contexts queue management (not available on devices: STM32WB10xx, STM32WB15xx)
  *          Other functions (generic functions) are available in file
  *          "stm32wbxx_hal_adc.c".
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  @verbatim
  [..]
  (@) Sections "ADC peripheral features" and "How to use this driver" are
      available in file of generic functions "stm32wbxx_hal_adc.c".
  [..]
  @endverbatim
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32wbxx_hal.h"

/** @addtogroup STM32WBxx_HAL_Driver
  * @{
  */

/** @defgroup ADCEx ADCEx
  * @brief ADC Extended HAL module driver
  * @{
  */

#ifdef HAL_ADC_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/

/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants
  * @{
  */

#define ADC_JSQR_FIELDS  ((ADC_JSQR_JL | ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN |\
                           ADC_JSQR_JSQ1  | ADC_JSQR_JSQ2 |\
                           ADC_JSQR_JSQ3 | ADC_JSQR_JSQ4 ))  /*!< ADC_JSQR fields of parameters that can be updated anytime
                                                                  once the ADC is enabled */

/* Fixed timeout value for ADC calibration.                                   */
/* Values defined to be higher than worst cases: maximum ratio between ADC    */
/* and CPU clock frequencies.                                                 */
/* Example of profile low frequency : ADC frequency at 46.9kHz (ADC clock     */
/* source PLL SAI 12MHz, ADC clock prescaler 256), CPU frequency 64MHz.       */
/* Calibration time max = 116 / fADC (refer to datasheet)                     */
/*                      = 158 379 CPU cycles                                  */
#define ADC_CALIBRATION_TIMEOUT         (158379UL)   /*!< ADC calibration time-out value (unit: CPU cycles) */

/**
  * @}
  */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/

/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions
  * @{
  */

/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions
  * @brief    Extended IO operation functions
  *
@verbatim
 ===============================================================================
                      ##### IO operation functions #####
 ===============================================================================
    [..]  This section provides functions allowing to:

      (+) Perform the ADC self-calibration for single or differential ending.
      (+) Get calibration factors for single or differential ending.
      (+) Set calibration factors for single or differential ending.

      (+) Start conversion of ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx).
      (+) Stop conversion of ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx).
      (+) Poll for conversion complete on ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx).
      (+) Get result of ADC group injected channel conversion (not available on devices: STM32WB10xx, STM32WB15xx).
      (+) Start conversion of ADC group injected and enable interruptions (not available on devices: STM32WB10xx, STM32WB15xx).
      (+) Stop conversion of ADC group injected and disable interruptions (not available on devices: STM32WB10xx, STM32WB15xx).

@endverbatim
  * @{
  */

/**
  * @brief  Perform an ADC automatic self-calibration
  *         Calibration prerequisite: ADC must be disabled (execute this
  *         function before HAL_ADC_Start() or after HAL_ADC_Stop() ).
  * @param  hadc       ADC handle
  * @param  SingleDiff Selection of single-ended or differential input
  *         This parameter can be one of the following values:
  *           @arg @ref ADC_SINGLE_ENDED       Channel in mode input single ended
  *           @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended (1)
  *
  *         (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff)
{
#if defined (ADC_SUPPORT_2_5_MSPS)
  UNUSED(SingleDiff);

  uint32_t calibration_index;
  uint32_t calibration_factor_accumulated = 0;
#endif /* ADC_SUPPORT_2_5_MSPS */

  HAL_StatusTypeDef tmp_hal_status;
  __IO uint32_t wait_loop_index = 0UL;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* Calibration prerequisite: ADC must be disabled. */

  /* Disable the ADC (if not already disabled) */
  tmp_hal_status = ADC_Disable(hadc);

  /* Check if ADC is effectively disabled */
  if (tmp_hal_status == HAL_OK)
  {
    /* Set ADC state */
#if defined (ADC_SUPPORT_2_5_MSPS)
    ADC_STATE_CLR_SET(hadc->State,
                      HAL_ADC_STATE_REG_BUSY,
                      HAL_ADC_STATE_BUSY_INTERNAL);
#else
    ADC_STATE_CLR_SET(hadc->State,
                      HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
                      HAL_ADC_STATE_BUSY_INTERNAL);
#endif /* ADC_SUPPORT_2_5_MSPS */

    /* Start ADC calibration in mode single-ended or differential */
#if defined (ADC_SUPPORT_2_5_MSPS)
    /* ADC calibration procedure */
    /* Note: Perform an averaging of 8 calibrations for optimized accuracy */
    for (calibration_index = 0UL; calibration_index < 8UL; calibration_index++)
    {
      /* Start ADC calibration */
      LL_ADC_StartCalibration(hadc->Instance);

#else
    LL_ADC_StartCalibration(hadc->Instance, SingleDiff);
#endif /* ADC_SUPPORT_2_5_MSPS */

    /* Wait for calibration completion */
    while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL)
    {
      wait_loop_index++;
      if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT)
      {
        /* Update ADC state machine to error */
        ADC_STATE_CLR_SET(hadc->State,
                          HAL_ADC_STATE_BUSY_INTERNAL,
                          HAL_ADC_STATE_ERROR_INTERNAL);

        /* Process unlocked */
        __HAL_UNLOCK(hadc);

        return HAL_ERROR;
      }
    }
#if defined (ADC_SUPPORT_2_5_MSPS)
      calibration_factor_accumulated += LL_ADC_GetCalibrationFactor(hadc->Instance);
    }
    /* Compute average */
    calibration_factor_accumulated /= calibration_index;
    /* Apply calibration factor */
    LL_ADC_Enable(hadc->Instance);
    LL_ADC_SetCalibrationFactor(hadc->Instance, calibration_factor_accumulated);
    LL_ADC_Disable(hadc->Instance);
#endif /* ADC_SUPPORT_2_5_MSPS */

    /* Set ADC state */
    ADC_STATE_CLR_SET(hadc->State,
                      HAL_ADC_STATE_BUSY_INTERNAL,
                      HAL_ADC_STATE_READY);
  }
  else
  {
    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);

    /* Note: No need to update variable "tmp_hal_status" here: already set    */
    /*       to state "HAL_ERROR" by function disabling the ADC.              */
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}

/**
  * @brief  Get the calibration factor.
  * @param hadc ADC handle.
  * @param SingleDiff This parameter can be only:
  *           @arg @ref ADC_SINGLE_ENDED       Channel in mode input single ended
  *           @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended (1)
  *
  *         (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx.
  * @retval Calibration value.
  */
uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff)
{
#if defined (ADC_SUPPORT_2_5_MSPS)
  UNUSED(SingleDiff);
#endif
  
  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff));

  /* Return the selected ADC calibration value */
#if defined (ADC_SUPPORT_2_5_MSPS)
  return LL_ADC_GetCalibrationFactor(hadc->Instance);
#else
  return LL_ADC_GetCalibrationFactor(hadc->Instance, SingleDiff);
#endif
}

/**
  * @brief  Set the calibration factor to overwrite automatic conversion result.
  *         ADC must be enabled and no conversion is ongoing.
  * @param hadc ADC handle
  * @param SingleDiff This parameter can be only:
  *           @arg @ref ADC_SINGLE_ENDED       Channel in mode input single ended
  *           @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended (1)
  *
  *         (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx.
  * @param CalibrationFactor Calibration factor (coded on 7 bits maximum)
  * @retval HAL state
  */
HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor)
{
#if defined (ADC_SUPPORT_2_5_MSPS)
  UNUSED(SingleDiff);
#endif
  
  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
  uint32_t tmp_adc_is_conversion_on_going_regular;
#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
  uint32_t tmp_adc_is_conversion_on_going_injected;
#endif /* ADC_SUPPORT_2_5_MSPS */

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff));
  assert_param(IS_ADC_CALFACT(CalibrationFactor));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* Verification of hardware constraints before modifying the calibration    */
  /* factors register: ADC must be enabled, no conversion on going.           */
  tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
  tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance);
#endif /* ADC_SUPPORT_2_5_MSPS */

  if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL)
      && (tmp_adc_is_conversion_on_going_regular == 0UL)
#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
      && (tmp_adc_is_conversion_on_going_injected == 0UL)
#endif /* ADC_SUPPORT_2_5_MSPS */
     )
  {
    /* Set the selected ADC calibration value */
#if defined (ADC_SUPPORT_2_5_MSPS)
    LL_ADC_SetCalibrationFactor(hadc->Instance, CalibrationFactor);
#else
    LL_ADC_SetCalibrationFactor(hadc->Instance, SingleDiff, CalibrationFactor);
#endif
  }
  else
  {
    /* Update ADC state machine */
    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
    /* Update ADC error code */
    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);

    /* Update ADC state machine to error */
    tmp_hal_status = HAL_ERROR;
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}

#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
/**
  * @brief  Enable ADC, start conversion of injected group.
  * @note   Interruptions enabled in this function: None.
  * @param hadc ADC handle.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;
  uint32_t tmp_config_injected_queue;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) != 0UL)
  {
    return HAL_BUSY;
  }
  else
  {
    /* In case of software trigger detection enabled, JQDIS must be set
      (which can be done only if ADSTART and JADSTART are both cleared).
       If JQDIS is not set at that point, returns an error
       - since software trigger detection is disabled. User needs to
       resort to HAL_ADCEx_DisableInjectedQueue() API to set JQDIS.
       - or (if JQDIS is intentionally reset) since JEXTEN = 0 which means
         the queue is empty */
    tmp_config_injected_queue = READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS);

    if ((READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL)
        && (tmp_config_injected_queue == 0UL)
       )
    {
      SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
      return HAL_ERROR;
    }

    /* Process locked */
    __HAL_LOCK(hadc);

    /* Enable the ADC peripheral */
    tmp_hal_status = ADC_Enable(hadc);

    /* Start conversion if ADC is effectively enabled */
    if (tmp_hal_status == HAL_OK)
    {
      /* Check if a regular conversion is ongoing */
      if ((hadc->State & HAL_ADC_STATE_REG_BUSY) != 0UL)
      {
        /* Reset ADC error code field related to injected conversions only */
        CLEAR_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF);
      }
      else
      {
        /* Set ADC error code to none */
        ADC_CLEAR_ERRORCODE(hadc);
      }

      /* Set ADC state                                                        */
      /* - Clear state bitfield related to injected group conversion results  */
      /* - Set state bitfield related to injected operation                   */
      ADC_STATE_CLR_SET(hadc->State,
                        HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
                        HAL_ADC_STATE_INJ_BUSY);

      /* Clear ADC group injected group conversion flag */
      /* (To ensure of no unknown state from potential previous ADC operations) */
      __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JEOC | ADC_FLAG_JEOS));

      /* Process unlocked */
      /* Unlock before starting ADC conversions: in case of potential         */
      /* interruption, to let the process to ADC IRQ Handler.                 */
      __HAL_UNLOCK(hadc);

      /* Enable conversion of injected group, if automatic injected conversion  */
      /* is disabled.                                                           */
      /* If software start has been selected, conversion starts immediately.    */
      /* If external trigger has been selected, conversion will start at next   */
      /* trigger event.                                                         */
      if(LL_ADC_INJ_GetTrigAuto(hadc->Instance) == LL_ADC_INJ_TRIG_INDEPENDENT)
      {
        /* Start ADC group injected conversion */
        LL_ADC_INJ_StartConversion(hadc->Instance);
      }
    }
    else
    {
      /* Process unlocked */
      __HAL_UNLOCK(hadc);
    }

    /* Return function status */
    return tmp_hal_status;
  }
}

/**
  * @brief  Stop conversion of injected channels. Disable ADC peripheral if
  *         no regular conversion is on going.
  * @note   If ADC must be disabled and if conversion is on going on
  *         regular group, function HAL_ADC_Stop must be used to stop both
  *         injected and regular groups, and disable the ADC.
  * @note   If injected group mode auto-injection is enabled,
  *         function HAL_ADC_Stop must be used.
  * @param hadc ADC handle.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* 1. Stop potential conversion on going on injected group only. */
  tmp_hal_status = ADC_ConversionStop(hadc, ADC_INJECTED_GROUP);

  /* Disable ADC peripheral if injected conversions are effectively stopped   */
  /* and if no conversion on regular group is on-going                       */
  if (tmp_hal_status == HAL_OK)
  {
    if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
    {
      /* 2. Disable the ADC peripheral */
      tmp_hal_status = ADC_Disable(hadc);

      /* Check if ADC is effectively disabled */
      if (tmp_hal_status == HAL_OK)
      {
        /* Set ADC state */
        ADC_STATE_CLR_SET(hadc->State,
                          HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
                          HAL_ADC_STATE_READY);
      }
    }
    /* Conversion on injected group is stopped, but ADC not disabled since    */
    /* conversion on regular group is still running.                          */
    else
    {
      /* Set ADC state */
      CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
    }
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}

/**
  * @brief  Wait for injected group conversion to be completed.
  * @param hadc ADC handle
  * @param Timeout Timeout value in millisecond.
  * @note   Depending on hadc->Init.EOCSelection, JEOS or JEOC is
  *         checked and cleared depending on AUTDLY bit status.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout)
{
  uint32_t tickstart;
  uint32_t tmp_Flag_End;
  uint32_t tmp_adc_inj_is_trigger_source_sw_start;
  uint32_t tmp_adc_reg_is_trigger_source_sw_start;
  uint32_t tmp_cfgr;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* If end of sequence selected */
  if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV)
  {
    tmp_Flag_End = ADC_FLAG_JEOS;
  }
  else /* end of conversion selected */
  {
    tmp_Flag_End = ADC_FLAG_JEOC;
  }

  /* Get timeout */
  tickstart = HAL_GetTick();

  /* Wait until End of Conversion or Sequence flag is raised */
  while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
  {
    /* Check if timeout is disabled (set to infinite wait) */
    if (Timeout != HAL_MAX_DELAY)
    {
      if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
      {
        /* New check to avoid false timeout detection in case of preemption */
        if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
        {
          /* Update ADC state machine to timeout */
          SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);

          /* Process unlocked */
          __HAL_UNLOCK(hadc);

          return HAL_TIMEOUT;
        }
      }
    }
  }

  /* Retrieve ADC configuration */
  tmp_adc_inj_is_trigger_source_sw_start = LL_ADC_INJ_IsTriggerSourceSWStart(hadc->Instance);
  tmp_adc_reg_is_trigger_source_sw_start = LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance);
  tmp_cfgr = READ_REG(hadc->Instance->CFGR);

  /* Update ADC state machine */
  SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);

  /* Determine whether any further conversion upcoming on group injected      */
  /* by external trigger or by automatic injected conversion                  */
  /* from group regular.                                                      */
  if ((tmp_adc_inj_is_trigger_source_sw_start != 0UL)            ||
      ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL)      &&
       ((tmp_adc_reg_is_trigger_source_sw_start != 0UL)  &&
        (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL))))
  {
    /* Check whether end of sequence is reached */
    if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS))
    {
      /* Particular case if injected contexts queue is enabled:             */
      /* when the last context has been fully processed, JSQR is reset      */
      /* by the hardware. Even if no injected conversion is planned to come */
      /* (queue empty, triggers are ignored), it can start again            */
      /* immediately after setting a new context (JADSTART is still set).   */
      /* Therefore, state of HAL ADC injected group is kept to busy.        */
      if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL)
      {
        /* Set ADC state */
        CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);

        if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL)
        {
          SET_BIT(hadc->State, HAL_ADC_STATE_READY);
        }
      }
    }
  }

  /* Clear polled flag */
  if (tmp_Flag_End == ADC_FLAG_JEOS)
  {
    /* Clear end of sequence JEOS flag of injected group if low power feature */
    /* "LowPowerAutoWait " is disabled, to not interfere with this feature.   */
    /* For injected groups, no new conversion will start before JEOS is       */
    /* cleared.                                                               */
    if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_AUTDLY) == 0UL)
    {
      __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JEOC | ADC_FLAG_JEOS));
    }
  }
  else
  {
    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
  }

  /* Return API HAL status */
  return HAL_OK;
}

/**
  * @brief  Enable ADC, start conversion of injected group with interruption.
  * @note   Interruptions enabled in this function according to initialization
  *         setting : JEOC (end of conversion) or JEOS (end of sequence)
  * @param hadc ADC handle.
  * @retval HAL status.
  */
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;
  uint32_t tmp_config_injected_queue;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) != 0UL)
  {
    return HAL_BUSY;
  }
  else
  {
    /* In case of software trigger detection enabled, JQDIS must be set
      (which can be done only if ADSTART and JADSTART are both cleared).
       If JQDIS is not set at that point, returns an error
       - since software trigger detection is disabled. User needs to
       resort to HAL_ADCEx_DisableInjectedQueue() API to set JQDIS.
       - or (if JQDIS is intentionally reset) since JEXTEN = 0 which means
         the queue is empty */
    tmp_config_injected_queue = READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS);

    if ((READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL)
        && (tmp_config_injected_queue == 0UL)
       )
    {
      SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
      return HAL_ERROR;
    }

    /* Process locked */
    __HAL_LOCK(hadc);

    /* Enable the ADC peripheral */
    tmp_hal_status = ADC_Enable(hadc);

    /* Start conversion if ADC is effectively enabled */
    if (tmp_hal_status == HAL_OK)
    {
      /* Check if a regular conversion is ongoing */
      if ((hadc->State & HAL_ADC_STATE_REG_BUSY) != 0UL)
      {
        /* Reset ADC error code field related to injected conversions only */
        CLEAR_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF);
      }
      else
      {
        /* Set ADC error code to none */
        ADC_CLEAR_ERRORCODE(hadc);
      }

      /* Set ADC state                                                        */
      /* - Clear state bitfield related to injected group conversion results  */
      /* - Set state bitfield related to injected operation                   */
      ADC_STATE_CLR_SET(hadc->State,
                        HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
                        HAL_ADC_STATE_INJ_BUSY);

      /* Clear ADC group injected group conversion flag */
      /* (To ensure of no unknown state from potential previous ADC operations) */
      __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JEOC | ADC_FLAG_JEOS));

      /* Process unlocked */
      /* Unlock before starting ADC conversions: in case of potential         */
      /* interruption, to let the process to ADC IRQ Handler.                 */
      __HAL_UNLOCK(hadc);

      /* Enable ADC Injected context queue overflow interrupt if this feature   */
      /* is enabled.                                                            */
      if ((hadc->Instance->CFGR & ADC_CFGR_JQM) != 0UL)
      {
        __HAL_ADC_ENABLE_IT(hadc, ADC_FLAG_JQOVF);
      }

      /* Enable ADC end of conversion interrupt */
      switch (hadc->Init.EOCSelection)
      {
        case ADC_EOC_SEQ_CONV:
          __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
          __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOS);
          break;
        /* case ADC_EOC_SINGLE_CONV */
        default:
          __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOS);
          __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
          break;
      }

      /* Enable conversion of injected group, if automatic injected conversion  */
      /* is disabled.                                                           */
      /* If software start has been selected, conversion starts immediately.    */
      /* If external trigger has been selected, conversion will start at next   */
      /* trigger event.                                                         */
      if(LL_ADC_INJ_GetTrigAuto(hadc->Instance) == LL_ADC_INJ_TRIG_INDEPENDENT)
      {
        /* Start ADC group injected conversion */
        LL_ADC_INJ_StartConversion(hadc->Instance);
      }
    }
    else
    {
      /* Process unlocked */
      __HAL_UNLOCK(hadc);
    }

    /* Return function status */
    return tmp_hal_status;
  }
}

/**
  * @brief  Stop conversion of injected channels, disable interruption of
  *         end-of-conversion. Disable ADC peripheral if no regular conversion
  *         is on going.
  * @note   If ADC must be disabled and if conversion is on going on
  *         regular group, function HAL_ADC_Stop must be used to stop both
  *         injected and regular groups, and disable the ADC.
  * @note   If injected group mode auto-injection is enabled,
  *         function HAL_ADC_Stop must be used.
  * @note   In case of auto-injection mode, HAL_ADC_Stop() must be used.
  * @param hadc ADC handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* 1. Stop potential conversion on going on injected group only. */
  tmp_hal_status = ADC_ConversionStop(hadc, ADC_INJECTED_GROUP);

  /* Disable ADC peripheral if injected conversions are effectively stopped   */
  /* and if no conversion on the other group (regular group) is intended to   */
  /* continue.                                                                */
  if (tmp_hal_status == HAL_OK)
  {
    /* Disable ADC end of conversion interrupt for injected channels */
    __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_JEOC | ADC_IT_JEOS | ADC_FLAG_JQOVF));

    if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
    {
      /* 2. Disable the ADC peripheral */
      tmp_hal_status = ADC_Disable(hadc);

      /* Check if ADC is effectively disabled */
      if (tmp_hal_status == HAL_OK)
      {
        /* Set ADC state */
        ADC_STATE_CLR_SET(hadc->State,
                          HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
                          HAL_ADC_STATE_READY);
      }
    }
    /* Conversion on injected group is stopped, but ADC not disabled since    */
    /* conversion on regular group is still running.                          */
    else
    {
      /* Set ADC state */
      CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
    }
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}
#endif /* ADC_SUPPORT_2_5_MSPS */

#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
/**
  * @brief  Get ADC injected group conversion result.
  * @note   Reading register JDRx automatically clears ADC flag JEOC
  *         (ADC group injected end of unitary conversion).
  * @note   This function does not clear ADC flag JEOS
  *         (ADC group injected end of sequence conversion)
  *         Occurrence of flag JEOS rising:
  *          - If sequencer is composed of 1 rank, flag JEOS is equivalent
  *            to flag JEOC.
  *          - If sequencer is composed of several ranks, during the scan
  *            sequence flag JEOC only is raised, at the end of the scan sequence
  *            both flags JEOC and EOS are raised.
  *         Flag JEOS must not be cleared by this function because
  *         it would not be compliant with low power features
  *         (feature low power auto-wait, not available on all STM32 families).
  *         To clear this flag, either use function:
  *         in programming model IT: @ref HAL_ADC_IRQHandler(), in programming
  *         model polling: @ref HAL_ADCEx_InjectedPollForConversion()
  *         or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_JEOS).
  * @param hadc ADC handle
  * @param InjectedRank the converted ADC injected rank.
  *          This parameter can be one of the following values:
  *            @arg @ref ADC_INJECTED_RANK_1 ADC group injected rank 1
  *            @arg @ref ADC_INJECTED_RANK_2 ADC group injected rank 2
  *            @arg @ref ADC_INJECTED_RANK_3 ADC group injected rank 3
  *            @arg @ref ADC_INJECTED_RANK_4 ADC group injected rank 4
  * @retval ADC group injected conversion data
  */
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank)
{
  uint32_t tmp_jdr;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
  assert_param(IS_ADC_INJECTED_RANK(InjectedRank));

  /* Get ADC converted value */
  switch (InjectedRank)
  {
    case ADC_INJECTED_RANK_4:
      tmp_jdr = hadc->Instance->JDR4;
      break;
    case ADC_INJECTED_RANK_3:
      tmp_jdr = hadc->Instance->JDR3;
      break;
    case ADC_INJECTED_RANK_2:
      tmp_jdr = hadc->Instance->JDR2;
      break;
    case ADC_INJECTED_RANK_1:
    default:
      tmp_jdr = hadc->Instance->JDR1;
      break;
  }

  /* Return ADC converted value */
  return tmp_jdr;
}

/**
  * @brief  Injected conversion complete callback in non-blocking mode.
  * @param hadc ADC handle
  * @retval None
  */
__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hadc);

  /* NOTE : This function should not be modified. When the callback is needed,
            function HAL_ADCEx_InjectedConvCpltCallback must be implemented in the user file.
  */
}

/**
  * @brief  Injected context queue overflow callback.
  * @note   This callback is called if injected context queue is enabled
            (parameter "QueueInjectedContext" in injected channel configuration)
            and if a new injected context is set when queue is full (maximum 2
            contexts).
  * @param hadc ADC handle
  * @retval None
  */
__weak void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hadc);

  /* NOTE : This function should not be modified. When the callback is needed,
            function HAL_ADCEx_InjectedQueueOverflowCallback must be implemented in the user file.
  */
}
#endif /* ADC_SUPPORT_2_5_MSPS */

/**
  * @brief  Analog watchdog 2 callback in non-blocking mode.
  * @param hadc ADC handle
  * @retval None
  */
__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hadc);

  /* NOTE : This function should not be modified. When the callback is needed,
            function HAL_ADCEx_LevelOutOfWindow2Callback must be implemented in the user file.
  */
}

/**
  * @brief  Analog watchdog 3 callback in non-blocking mode.
  * @param hadc ADC handle
  * @retval None
  */
__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hadc);

  /* NOTE : This function should not be modified. When the callback is needed,
            function HAL_ADCEx_LevelOutOfWindow3Callback must be implemented in the user file.
  */
}


/**
  * @brief  End Of Sampling callback in non-blocking mode.
  * @param hadc ADC handle
  * @retval None
  */
__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hadc);

  /* NOTE : This function should not be modified. When the callback is needed,
            function HAL_ADCEx_EndOfSamplingCallback must be implemented in the user file.
  */
}

#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
/**
  * @brief  Stop ADC conversion of regular group (and injected channels in
  *         case of auto_injection mode), disable ADC peripheral if no
  *         conversion is on going on injected group.
  * @param hadc ADC handle
  * @retval HAL status.
  */
HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* 1. Stop potential regular conversion on going */
  tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP);

  /* Disable ADC peripheral if regular conversions are effectively stopped
     and if no injected conversions are on-going */
  if (tmp_hal_status == HAL_OK)
  {
    /* Clear HAL_ADC_STATE_REG_BUSY bit */
    CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);

    if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
    {
      /* 2. Disable the ADC peripheral */
      tmp_hal_status = ADC_Disable(hadc);

      /* Check if ADC is effectively disabled */
      if (tmp_hal_status == HAL_OK)
      {
        /* Set ADC state */
        ADC_STATE_CLR_SET(hadc->State,
                          HAL_ADC_STATE_INJ_BUSY,
                          HAL_ADC_STATE_READY);
      }
    }
    /* Conversion on injected group is stopped, but ADC not disabled since    */
    /* conversion on regular group is still running.                          */
    else
    {
      SET_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
    }
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}


/**
  * @brief  Stop ADC conversion of ADC groups regular and injected,
  *         disable interrution of end-of-conversion,
  *         disable ADC peripheral if no conversion is on going
  *         on injected group.
  * @param hadc ADC handle
  * @retval HAL status.
  */
HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* 1. Stop potential regular conversion on going */
  tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP);

  /* Disable ADC peripheral if conversions are effectively stopped
    and if no injected conversion is on-going */
  if (tmp_hal_status == HAL_OK)
  {
    /* Clear HAL_ADC_STATE_REG_BUSY bit */
    CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);

    /* Disable all regular-related interrupts */
    __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR));

    /* 2. Disable ADC peripheral if no injected conversions are on-going */
    if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
    {
      tmp_hal_status = ADC_Disable(hadc);
      /* if no issue reported */
      if (tmp_hal_status == HAL_OK)
      {
        /* Set ADC state */
        ADC_STATE_CLR_SET(hadc->State,
                          HAL_ADC_STATE_INJ_BUSY,
                          HAL_ADC_STATE_READY);
      }
    }
    else
    {
      SET_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
    }
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}

/**
  * @brief  Stop ADC conversion of regular group (and injected group in
  *         case of auto_injection mode), disable ADC DMA transfer, disable
  *         ADC peripheral if no conversion is on going
  *         on injected group.
  * @param hadc ADC handle
  * @retval HAL status.
  */
HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Process locked */
  __HAL_LOCK(hadc);

  /* 1. Stop potential regular conversion on going */
  tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP);

  /* Disable ADC peripheral if conversions are effectively stopped
     and if no injected conversion is on-going */
  if (tmp_hal_status == HAL_OK)
  {
    /* Clear HAL_ADC_STATE_REG_BUSY bit */
    CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);

    /* Disable ADC DMA (ADC DMA configuration ADC_CFGR_DMACFG is kept) */
    CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN);

    /* Disable the DMA channel (in case of DMA in circular mode or stop while */
    /* while DMA transfer is on going)                                        */
    tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);

    /* Check if DMA channel effectively disabled */
    if (tmp_hal_status != HAL_OK)
    {
      /* Update ADC state machine to error */
      SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA);
    }

    /* Disable ADC overrun interrupt */
    __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);

    /* 2. Disable the ADC peripheral */
    /* Update "tmp_hal_status" only if DMA channel disabling passed,          */
    /* to keep in memory a potential failing status.                          */
    if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
    {
      if (tmp_hal_status == HAL_OK)
      {
        tmp_hal_status = ADC_Disable(hadc);
      }
      else
      {
        (void)ADC_Disable(hadc);
      }

      /* Check if ADC is effectively disabled */
      if (tmp_hal_status == HAL_OK)
      {
        /* Set ADC state */
        ADC_STATE_CLR_SET(hadc->State,
                          HAL_ADC_STATE_INJ_BUSY,
                          HAL_ADC_STATE_READY);
      }
    }
    else
    {
      SET_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
    }
  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}
#endif /* ADC_SUPPORT_2_5_MSPS */

/**
  * @}
  */

#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
/** @defgroup ADCEx_Exported_Functions_Group2 ADC Extended Peripheral Control functions
  * @brief    ADC Extended Peripheral Control functions
  *
@verbatim
 ===============================================================================
             ##### Peripheral Control functions #####
 ===============================================================================
    [..]  This section provides functions allowing to:
      (+) Configure channels on injected group
      (+) Enable or Disable Injected Queue
      (+) Disable ADC voltage regulator
      (+) Enter ADC deep-power-down mode

@endverbatim
  * @{
  */

/**
  * @brief  Configure a channel to be assigned to ADC group injected.
  * @note   Possibility to update parameters on the fly:
  *         This function initializes injected group, following calls to this
  *         function can be used to reconfigure some parameters of structure
  *         "ADC_InjectionConfTypeDef" on the fly, without resetting the ADC.
  *         The setting of these parameters is conditioned to ADC state:
  *         Refer to comments of structure "ADC_InjectionConfTypeDef".
  * @note   In case of usage of internal measurement channels:
  *         Vbat/VrefInt/TempSensor.
  *         These internal paths can be disabled using function
  *         HAL_ADC_DeInit().
  * @note   Caution: For Injected Context Queue use, a context must be fully
  *         defined before start of injected conversion. All channels are configured
  *         consecutively for the same ADC instance. Therefore, the number of calls to
  *         HAL_ADCEx_InjectedConfigChannel() must be equal to the value of parameter
  *         InjectedNbrOfConversion for each context.
  *  - Example 1: If 1 context is intended to be used (or if there is no use of the
  *    Injected Queue Context feature) and if the context contains 3 injected ranks
  *    (InjectedNbrOfConversion = 3), HAL_ADCEx_InjectedConfigChannel() must be
  *    called once for each channel (i.e. 3 times) before starting a conversion.
  *    This function must not be called to configure a 4th injected channel:
  *    it would start a new context into context queue.
  *  - Example 2: If 2 contexts are intended to be used and each of them contains
  *    3 injected ranks (InjectedNbrOfConversion = 3),
  *    HAL_ADCEx_InjectedConfigChannel() must be called once for each channel and
  *    for each context (3 channels x 2 contexts = 6 calls). Conversion can
  *    start once the 1st context is set, that is after the first three
  *    HAL_ADCEx_InjectedConfigChannel() calls. The 2nd context can be set on the fly.
  * @param hadc ADC handle
  * @param sConfigInjected Structure of ADC injected group and ADC channel for
  *         injected group.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_InjectionConfTypeDef *sConfigInjected)
{
  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
  uint32_t tmpOffsetShifted;
  uint32_t tmp_config_internal_channel;
  uint32_t tmp_adc_is_conversion_on_going_regular;
  uint32_t tmp_adc_is_conversion_on_going_injected;
  __IO uint32_t wait_loop_index = 0;

  uint32_t tmp_JSQR_ContextQueueBeingBuilt = 0U;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
  assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
  assert_param(IS_ADC_SINGLE_DIFFERENTIAL(sConfigInjected->InjectedSingleDiff));
  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->QueueInjectedContext));
  assert_param(IS_ADC_EXTTRIGINJEC_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
  assert_param(IS_ADC_EXTTRIGINJEC(hadc, sConfigInjected->ExternalTrigInjecConv));
  assert_param(IS_ADC_OFFSET_NUMBER(sConfigInjected->InjectedOffsetNumber));
  assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), sConfigInjected->InjectedOffset));
  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjecOversamplingMode));

  if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE)
  {
    assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
    assert_param(IS_ADC_INJECTED_NB_CONV(sConfigInjected->InjectedNbrOfConversion));
    assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
  }


  /* if JOVSE is set, the value of the OFFSETy_EN bit in ADCx_OFRy register is
     ignored (considered as reset) */
  assert_param(!((sConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE) && (sConfigInjected->InjecOversamplingMode == ENABLE)));

  /* JDISCEN and JAUTO bits can't be set at the same time  */
  assert_param(!((sConfigInjected->InjectedDiscontinuousConvMode == ENABLE) && (sConfigInjected->AutoInjectedConv == ENABLE)));

  /*  DISCEN and JAUTO bits can't be set at the same time */
  assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (sConfigInjected->AutoInjectedConv == ENABLE)));

  /* Verification of channel number */
  if (sConfigInjected->InjectedSingleDiff != ADC_DIFFERENTIAL_ENDED)
  {
    assert_param(IS_ADC_CHANNEL(hadc, sConfigInjected->InjectedChannel));
  }
  else
  {
    assert_param(IS_ADC_DIFF_CHANNEL(hadc, sConfigInjected->InjectedChannel));
  }

  /* Process locked */
  __HAL_LOCK(hadc);

  /* Configuration of injected group sequencer:                               */
  /* Hardware constraint: Must fully define injected context register JSQR    */
  /* before make it entering into injected sequencer queue.                   */
  /*                                                                          */
  /* - if scan mode is disabled:                                              */
  /*    * Injected channels sequence length is set to 0x00: 1 channel         */
  /*      converted (channel on injected rank 1)                              */
  /*      Parameter "InjectedNbrOfConversion" is discarded.                   */
  /*    * Injected context register JSQR setting is simple: register is fully */
  /*      defined on one call of this function (for injected rank 1) and can  */
  /*      be entered into queue directly.                                     */
  /* - if scan mode is enabled:                                               */
  /*    * Injected channels sequence length is set to parameter               */
  /*      "InjectedNbrOfConversion".                                          */
  /*    * Injected context register JSQR setting more complex: register is    */
  /*      fully defined over successive calls of this function, for each      */
  /*      injected channel rank. It is entered into queue only when all       */
  /*      injected ranks have been set.                                       */
  /*   Note: Scan mode is not present by hardware on this device, but used    */
  /*   by software for alignment over all STM32 devices.                      */

  if ((hadc->Init.ScanConvMode == ADC_SCAN_DISABLE)  ||
      (sConfigInjected->InjectedNbrOfConversion == 1U))
  {
    /* Configuration of context register JSQR:                                */
    /*  - number of ranks in injected group sequencer: fixed to 1st rank      */
    /*    (scan mode disabled, only rank 1 used)                              */
    /*  - external trigger to start conversion                                */
    /*  - external trigger polarity                                           */
    /*  - channel set to rank 1 (scan mode disabled, only rank 1 can be used) */

    if (sConfigInjected->InjectedRank == ADC_INJECTED_RANK_1)
    {
      /* Enable external trigger if trigger selection is different of         */
      /* software start.                                                      */
      /* Note: This configuration keeps the hardware feature of parameter     */
      /*       ExternalTrigInjecConvEdge "trigger edge none" equivalent to    */
      /*       software start.                                                */
      if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
      {
        tmp_JSQR_ContextQueueBeingBuilt = (ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1)
                                           | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL)
                                           | sConfigInjected->ExternalTrigInjecConvEdge
                                          );
      }
      else
      {
        tmp_JSQR_ContextQueueBeingBuilt = (ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1));
      }

      MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, tmp_JSQR_ContextQueueBeingBuilt);
      /* For debug and informative reasons, hadc handle saves JSQR setting */
      hadc->InjectionConfig.ContextQueue = tmp_JSQR_ContextQueueBeingBuilt;

    }
  }
  else
  {
    /* Case of scan mode enabled, several channels to set into injected group */
    /* sequencer.                                                             */
    /*                                                                        */
    /* Procedure to define injected context register JSQR over successive     */
    /* calls of this function, for each injected channel rank:                */
    /* 1. Start new context and set parameters related to all injected        */
    /*    channels: injected sequence length and trigger.                     */

    /* if hadc->InjectionConfig.ChannelCount is equal to 0, this is the first */
    /*   call of the context under setting                                    */
    if (hadc->InjectionConfig.ChannelCount == 0U)
    {
      /* Initialize number of channels that will be configured on the context */
      /*  being built                                                         */
      hadc->InjectionConfig.ChannelCount = sConfigInjected->InjectedNbrOfConversion;
      /* Handle hadc saves the context under build up over each HAL_ADCEx_InjectedConfigChannel()
         call, this context will be written in JSQR register at the last call.
         At this point, the context is merely reset  */
      hadc->InjectionConfig.ContextQueue = 0x00000000U;

      /* Configuration of context register JSQR:                              */
      /*  - number of ranks in injected group sequencer                       */
      /*  - external trigger to start conversion                              */
      /*  - external trigger polarity                                         */

      /* Enable external trigger if trigger selection is different of         */
      /* software start.                                                      */
      /* Note: This configuration keeps the hardware feature of parameter     */
      /*       ExternalTrigInjecConvEdge "trigger edge none" equivalent to    */
      /*       software start.                                                */
      if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
      {
        tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U)
                                           | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL)
                                           | sConfigInjected->ExternalTrigInjecConvEdge
                                          );
      }
      else
      {
        tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U));
      }

    }

    /* 2. Continue setting of context under definition with parameter       */
    /*    related to each channel: channel rank sequence                    */
    /* Clear the old JSQx bits for the selected rank */
    tmp_JSQR_ContextQueueBeingBuilt &= ~ADC_JSQR_RK(ADC_SQR3_SQ10, sConfigInjected->InjectedRank);

    /* Set the JSQx bits for the selected rank */
    tmp_JSQR_ContextQueueBeingBuilt |= ADC_JSQR_RK(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank);

    /* Decrease channel count  */
    hadc->InjectionConfig.ChannelCount--;

    /* 3. tmp_JSQR_ContextQueueBeingBuilt is fully built for this HAL_ADCEx_InjectedConfigChannel()
          call, aggregate the setting to those already built during the previous
          HAL_ADCEx_InjectedConfigChannel() calls (for the same context of course)  */
    hadc->InjectionConfig.ContextQueue |= tmp_JSQR_ContextQueueBeingBuilt;

    /* 4. End of context setting: if this is the last channel set, then write context
        into register JSQR and make it enter into queue                   */
    if (hadc->InjectionConfig.ChannelCount == 0U)
    {
      MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, hadc->InjectionConfig.ContextQueue);
    }
  }

  /* Parameters update conditioned to ADC state:                              */
  /* Parameters that can be updated when ADC is disabled or enabled without   */
  /* conversion on going on injected group:                                   */
  /*  - Injected context queue: Queue disable (active context is kept) or     */
  /*    enable (context decremented, up to 2 contexts queued)                 */
  /*  - Injected discontinuous mode: can be enabled only if auto-injected     */
  /*    mode is disabled.                                                     */
  if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
  {
    /* If auto-injected mode is disabled: no constraint                       */
    if (sConfigInjected->AutoInjectedConv == DISABLE)
    {
      MODIFY_REG(hadc->Instance->CFGR,
                 ADC_CFGR_JQM | ADC_CFGR_JDISCEN,
                 ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext)           |
                 ADC_CFGR_INJECT_DISCCONTINUOUS((uint32_t)sConfigInjected->InjectedDiscontinuousConvMode));
    }
    /* If auto-injected mode is enabled: Injected discontinuous setting is    */
    /* discarded.                                                             */
    else
    {
      MODIFY_REG(hadc->Instance->CFGR,
                 ADC_CFGR_JQM | ADC_CFGR_JDISCEN,
                 ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext));
    }

  }

  /* Parameters update conditioned to ADC state:                              */
  /* Parameters that can be updated when ADC is disabled or enabled without   */
  /* conversion on going on regular and injected groups:                      */
  /*  - Automatic injected conversion: can be enabled if injected group       */
  /*    external triggers are disabled.                                       */
  /*  - Channel sampling time                                                 */
  /*  - Channel offset                                                        */
  tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
  tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance);

  if ((tmp_adc_is_conversion_on_going_regular == 0UL)
      && (tmp_adc_is_conversion_on_going_injected == 0UL)
     )
  {
    /* If injected group external triggers are disabled (set to injected      */
    /* software start): no constraint                                         */
    if ((sConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START)
        || (sConfigInjected->ExternalTrigInjecConvEdge == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE))
    {
      if (sConfigInjected->AutoInjectedConv == ENABLE)
      {
        SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO);
      }
      else
      {
        CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO);
      }
    }
    /* If Automatic injected conversion was intended to be set and could not  */
    /* due to injected group external triggers enabled, error is reported.    */
    else
    {
      if (sConfigInjected->AutoInjectedConv == ENABLE)
      {
        /* Update ADC state machine to error */
        SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);

        tmp_hal_status = HAL_ERROR;
      }
      else
      {
        CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO);
      }
    }

    if (sConfigInjected->InjecOversamplingMode == ENABLE)
    {
      assert_param(IS_ADC_OVERSAMPLING_RATIO(sConfigInjected->InjecOversampling.Ratio));
      assert_param(IS_ADC_RIGHT_BIT_SHIFT(sConfigInjected->InjecOversampling.RightBitShift));

      /*  JOVSE must be reset in case of triggered regular mode  */
      assert_param(!(READ_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS) == (ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS)));

      /* Configuration of Injected Oversampler:                                 */
      /*  - Oversampling Ratio                                                  */
      /*  - Right bit shift                                                     */

      /* Enable OverSampling mode */
      MODIFY_REG(hadc->Instance->CFGR2,
                 ADC_CFGR2_JOVSE |
                 ADC_CFGR2_OVSR  |
                 ADC_CFGR2_OVSS,
                 ADC_CFGR2_JOVSE                                  |
                 sConfigInjected->InjecOversampling.Ratio         |
                 sConfigInjected->InjecOversampling.RightBitShift
                );
    }
    else
    {
      /* Disable Regular OverSampling */
      CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_JOVSE);
    }

      /* Set sampling time of the selected ADC channel */
      LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfigInjected->InjectedChannel, sConfigInjected->InjectedSamplingTime);

    /* Configure the offset: offset enable/disable, channel, offset value */

    /* Shift the offset with respect to the selected ADC resolution. */
    /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */
    tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, sConfigInjected->InjectedOffset);

    if (sConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE)
    {
      /* Set ADC selected offset number */
      LL_ADC_SetOffset(hadc->Instance, sConfigInjected->InjectedOffsetNumber, sConfigInjected->InjectedChannel,
                       tmpOffsetShifted);

    }
    else
    {
      /* Scan each offset register to check if the selected channel is targeted. */
      /* If this is the case, the corresponding offset number is disabled.       */
      if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_1)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
      {
        LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE);
      }
      if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_2)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
      {
        LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE);
      }
      if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_3)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
      {
        LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE);
      }
      if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_4)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel))
      {
        LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE);
      }
    }

  }

  /* Parameters update conditioned to ADC state:                              */
  /* Parameters that can be updated only when ADC is disabled:                */
  /*  - Single or differential mode                                           */
  /*  - Internal measurement channels: Vbat/VrefInt/TempSensor                */
  if (LL_ADC_IsEnabled(hadc->Instance) == 0UL)
  {
    /* Set mode single-ended or differential input of the selected ADC channel */
    LL_ADC_SetChannelSingleDiff(hadc->Instance, sConfigInjected->InjectedChannel, sConfigInjected->InjectedSingleDiff);

    /* Configuration of differential mode */
    /* Note: ADC channel number masked with value "0x1F" to ensure shift value within 32 bits range */
    if (sConfigInjected->InjectedSingleDiff == ADC_DIFFERENTIAL_ENDED)
    {
      /* Set sampling time of the selected ADC channel */
      LL_ADC_SetChannelSamplingTime(hadc->Instance, (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL((__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)sConfigInjected->InjectedChannel) + 1UL) & 0x1FUL)), sConfigInjected->InjectedSamplingTime);
    }

    /* Management of internal measurement channels: Vbat/VrefInt/TempSensor   */
    /* internal measurement paths enable: If internal channel selected,       */
    /* enable dedicated internal buffers and path.                            */
    /* Note: these internal measurement paths can be disabled using           */
    /* HAL_ADC_DeInit().                                                      */

    if(__LL_ADC_IS_CHANNEL_INTERNAL(sConfigInjected->InjectedChannel))
    {
      /* Configuration of common ADC parameters (continuation)                */
      /* Software is allowed to change common parameters only when all ADCs   */
      /* of the common group are disabled.                                    */
      if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) == 0UL)
      {
        tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance));

        /* If the requested internal measurement path has already been enabled, */
        /* bypass the configuration processing.                                 */
        if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL))
        {
          if (ADC_TEMPERATURE_SENSOR_INSTANCE(hadc))
          {
            LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel);

            /* Delay for temperature sensor stabilization time */
            /* Wait loop initialization and execution */
            /* Note: Variable divided by 2 to compensate partially              */
            /*       CPU processing cycles, scaling in us split to not          */
            /*       exceed 32 bits register capacity and handle low frequency. */
            wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
            while(wait_loop_index != 0UL)
            {
              wait_loop_index--;
            }
          }
        }
        else if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL))
        {
          if (ADC_BATTERY_VOLTAGE_INSTANCE(hadc))
          {
            LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel);
          }
        }
        else if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL))
        {
          if (ADC_VREFINT_INSTANCE(hadc))
          {
            LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel);
          }
        }
        else
        {
          /* nothing to do */
        }
      }
      /* If the requested internal measurement path has already been enabled  */
      /* and other ADC of the common group are enabled, internal              */
      /* measurement paths cannot be enabled.                                 */
      else
      {
        /* Update ADC state machine to error */
        SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);

        tmp_hal_status = HAL_ERROR;
      }
    }

  }

  /* Process unlocked */
  __HAL_UNLOCK(hadc);

  /* Return function status */
  return tmp_hal_status;
}
#endif /* ADC_SUPPORT_2_5_MSPS */

#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */
#else
/**
  * @brief  Enable Injected Queue
  * @note   This function resets CFGR register JQDIS bit in order to enable the
  *         Injected Queue. JQDIS can be written only when ADSTART and JDSTART
  *         are both equal to 0 to ensure that no regular nor injected
  *         conversion is ongoing.
  * @param hadc ADC handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;
  uint32_t tmp_adc_is_conversion_on_going_regular;
  uint32_t tmp_adc_is_conversion_on_going_injected;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
  tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance);

  /* Parameter can be set only if no conversion is on-going */
  if ((tmp_adc_is_conversion_on_going_regular == 0UL)
      && (tmp_adc_is_conversion_on_going_injected == 0UL)
     )
  {
    CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS);

    /* Update state, clear previous result related to injected queue overflow */
    CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_JQOVF);

    tmp_hal_status = HAL_OK;
  }
  else
  {
    tmp_hal_status = HAL_ERROR;
  }

  return tmp_hal_status;
}

/**
  * @brief  Disable Injected Queue
  * @note   This function sets CFGR register JQDIS bit in order to disable the
  *         Injected Queue. JQDIS can be written only when ADSTART and JDSTART
  *         are both equal to 0 to ensure that no regular nor injected
  *         conversion is ongoing.
  * @param hadc ADC handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;
  uint32_t tmp_adc_is_conversion_on_going_regular;
  uint32_t tmp_adc_is_conversion_on_going_injected;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance);
  tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance);

  /* Parameter can be set only if no conversion is on-going */
  if ((tmp_adc_is_conversion_on_going_regular == 0UL)
      && (tmp_adc_is_conversion_on_going_injected == 0UL)
     )
  {
    LL_ADC_INJ_SetQueueMode(hadc->Instance, LL_ADC_INJ_QUEUE_DISABLE);
    tmp_hal_status = HAL_OK;
  }
  else
  {
    tmp_hal_status = HAL_ERROR;
  }

  return tmp_hal_status;
}
#endif /* ADC_SUPPORT_2_5_MSPS */

/**
  * @brief  Disable ADC voltage regulator.
  * @note   Disabling voltage regulator allows to save power. This operation can
  *         be carried out only when ADC is disabled.
  * @note   To enable again the voltage regulator, the user is expected to
  *         resort to HAL_ADC_Init() API.
  * @param hadc ADC handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */
  if (LL_ADC_IsEnabled(hadc->Instance) == 0UL)
  {
    LL_ADC_DisableInternalRegulator(hadc->Instance);
    tmp_hal_status = HAL_OK;
  }
  else
  {
    tmp_hal_status = HAL_ERROR;
  }

  return tmp_hal_status;
}

#if defined (ADC_SUPPORT_2_5_MSPS)
/* Feature " ADC deep power-down" not available on ADC peripheral of this STM32WB device */
#else
/**
  * @brief  Enter ADC deep power-down mode
  * @note   This mode is achieved in setting DEEPPWD bit and allows to save power
  *         in reducing leakage currents. It is particularly interesting before
  *         entering stop modes.
  * @note   Setting DEEPPWD automatically clears ADVREGEN bit and disables the
  *         ADC voltage regulator. This means that this API encompasses
  *         HAL_ADCEx_DisableVoltageRegulator(). Additionally, the internal
  *         calibration is lost.
  * @note   To exit the ADC deep-power-down mode, the user is expected to
  *         resort to HAL_ADC_Init() API as well as to relaunch a calibration
  *         with HAL_ADCEx_Calibration_Start() API or to re-apply a previously
  *         saved calibration factor.
  * @param hadc ADC handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc)
{
  HAL_StatusTypeDef tmp_hal_status;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));

  /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */
  if (LL_ADC_IsEnabled(hadc->Instance) == 0UL)
  {
    LL_ADC_EnableDeepPowerDown(hadc->Instance);
    tmp_hal_status = HAL_OK;
  }
  else
  {
    tmp_hal_status = HAL_ERROR;
  }

  return tmp_hal_status;
}
#endif

/**
  * @}
  */

/**
  * @}
  */

#endif /* HAL_ADC_MODULE_ENABLED */
/**
  * @}
  */

/**
  * @}
  */