diff --git a/Inc/Legacy/stm32_hal_legacy.h b/Inc/Legacy/stm32_hal_legacy.h
index dc7f695..6e2d2d2 100644
--- a/Inc/Legacy/stm32_hal_legacy.h
+++ b/Inc/Legacy/stm32_hal_legacy.h
@@ -548,6 +548,16 @@
 #define OB_SRAM134_RST_ERASE          OB_SRAM_RST_ERASE
 #define OB_SRAM134_RST_NOT_ERASE      OB_SRAM_RST_NOT_ERASE
 #endif /* STM32U5 */
+#if defined(STM32U0)
+#define OB_USER_nRST_STOP             OB_USER_NRST_STOP
+#define OB_USER_nRST_STDBY            OB_USER_NRST_STDBY
+#define OB_USER_nRST_SHDW             OB_USER_NRST_SHDW
+#define OB_USER_nBOOT_SEL             OB_USER_NBOOT_SEL
+#define OB_USER_nBOOT0                OB_USER_NBOOT0
+#define OB_USER_nBOOT1                OB_USER_NBOOT1
+#define OB_nBOOT0_RESET               OB_NBOOT0_RESET
+#define OB_nBOOT0_SET                 OB_NBOOT0_SET
+#endif /* STM32U0 */
 
 /**
   * @}
@@ -1239,10 +1249,10 @@
 #define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1
 #define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
 
-#if defined(STM32H5)
+#if defined(STM32H5) || defined(STM32H7RS)
 #define TAMP_SECRETDEVICE_ERASE_NONE        TAMP_DEVICESECRETS_ERASE_NONE
 #define TAMP_SECRETDEVICE_ERASE_BKP_SRAM    TAMP_DEVICESECRETS_ERASE_BKPSRAM
-#endif /* STM32H5 */
+#endif /* STM32H5 || STM32H7RS */
 
 #if defined(STM32WBA)
 #define TAMP_SECRETDEVICE_ERASE_NONE            TAMP_DEVICESECRETS_ERASE_NONE
@@ -1254,10 +1264,10 @@
 #define TAMP_SECRETDEVICE_ERASE_ALL             TAMP_DEVICESECRETS_ERASE_ALL
 #endif /* STM32WBA */
 
-#if defined(STM32H5) || defined(STM32WBA)
+#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS)
 #define TAMP_SECRETDEVICE_ERASE_DISABLE     TAMP_DEVICESECRETS_ERASE_NONE
 #define TAMP_SECRETDEVICE_ERASE_ENABLE      TAMP_SECRETDEVICE_ERASE_ALL
-#endif /* STM32H5 || STM32WBA */
+#endif /* STM32H5 || STM32WBA || STM32H7RS */
 
 #if defined(STM32F7)
 #define RTC_TAMPCR_TAMPXE          RTC_TAMPER_ENABLE_BITS_MASK
@@ -1595,6 +1605,8 @@
 #define ETH_MAC_SMALL_FIFO_RW_ACTIVE          0x00000006U  /* MAC small FIFO read / write controllers active */
 #define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE   0x00000001U  /* MAC MII receive protocol engine active */
 
+#define ETH_TxPacketConfig        ETH_TxPacketConfigTypeDef   /* Transmit Packet Configuration structure definition */
+
 /**
   * @}
   */
@@ -1987,12 +1999,12 @@
 /** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose
   * @{
   */
-#if defined(STM32H5) || defined(STM32WBA)
+#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS)
 #define HAL_RTCEx_SetBoothardwareKey            HAL_RTCEx_LockBootHardwareKey
 #define HAL_RTCEx_BKUPBlock_Enable              HAL_RTCEx_BKUPBlock
 #define HAL_RTCEx_BKUPBlock_Disable             HAL_RTCEx_BKUPUnblock
 #define HAL_RTCEx_Erase_SecretDev_Conf          HAL_RTCEx_ConfigEraseDeviceSecrets
-#endif /* STM32H5 || STM32WBA */
+#endif /* STM32H5 || STM32WBA || STM32H7RS */
 
 /**
   * @}
@@ -2307,8 +2319,8 @@
 #define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
                                                           ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
                                                           __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
-# endif
-# if defined(STM32F302xE) || defined(STM32F302xC)
+#endif
+#if defined(STM32F302xE) || defined(STM32F302xC)
 #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
                                                           ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
                                                           ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
@@ -2341,8 +2353,8 @@
                                                           ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
                                                           ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
                                                           __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
-# endif
-# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#endif
+#if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
 #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
                                                           ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
                                                           ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
@@ -2399,8 +2411,8 @@
                                                           ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
                                                           ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
                                                           __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
-# endif
-# if defined(STM32F373xC) ||defined(STM32F378xx)
+#endif
+#if defined(STM32F373xC) ||defined(STM32F378xx)
 #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
                                                           __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
 #define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
@@ -2417,7 +2429,7 @@
                                                           __HAL_COMP_COMP2_EXTI_GET_FLAG())
 #define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
                                                           __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
-# endif
+#endif
 #else
 #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
                                                           __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
@@ -3642,9 +3654,12 @@
 #define RCC_MCOSOURCE_PLLCLK_NODIV  RCC_MCO1SOURCE_PLLCLK
 #define RCC_MCOSOURCE_PLLCLK_DIV2   RCC_MCO1SOURCE_PLLCLK_DIV2
 
-#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || \
-      defined(STM32WL) || defined(STM32C0)
+#if defined(STM32U0)
+#define RCC_SYSCLKSOURCE_STATUS_PLLR   RCC_SYSCLKSOURCE_STATUS_PLLCLK
+#endif
 
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || \
+    defined(STM32WL) || defined(STM32C0) || defined(STM32H7RS) || defined(STM32U0)
 #define RCC_RTCCLKSOURCE_NO_CLK     RCC_RTCCLKSOURCE_NONE
 #else
 #define RCC_RTCCLKSOURCE_NONE       RCC_RTCCLKSOURCE_NO_CLK
@@ -3746,8 +3761,10 @@
 #define __HAL_RCC_GET_DFSDM_SOURCE  __HAL_RCC_GET_DFSDM1_SOURCE
 #define RCC_DFSDM1CLKSOURCE_PCLK    RCC_DFSDM1CLKSOURCE_PCLK2
 #define RCC_SWPMI1CLKSOURCE_PCLK    RCC_SWPMI1CLKSOURCE_PCLK1
+#if !defined(STM32U0)
 #define RCC_LPTIM1CLKSOURCE_PCLK    RCC_LPTIM1CLKSOURCE_PCLK1
 #define RCC_LPTIM2CLKSOURCE_PCLK    RCC_LPTIM2CLKSOURCE_PCLK1
+#endif
 
 #define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1    RCC_DFSDM1AUDIOCLKSOURCE_I2S1
 #define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2    RCC_DFSDM1AUDIOCLKSOURCE_I2S2
@@ -3893,8 +3910,7 @@
   */
 #if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || \
     defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \
-    defined (STM32WBA) || defined (STM32H5) || \
-    defined (STM32C0)
+    defined (STM32WBA) || defined (STM32H5) || defined (STM32C0) || defined (STM32H7RS) ||  defined (STM32U0) 
 #else
 #define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
 #endif
@@ -4216,7 +4232,8 @@
 #define __HAL_TIM_SetCompare            __HAL_TIM_SET_COMPARE
 #define __HAL_TIM_GetCompare            __HAL_TIM_GET_COMPARE
 
-#define TIM_BREAKINPUTSOURCE_DFSDM      TIM_BREAKINPUTSOURCE_DFSDM1
+#define TIM_BREAKINPUTSOURCE_DFSDM  TIM_BREAKINPUTSOURCE_DFSDM1
+
 #define TIM_OCMODE_ASSYMETRIC_PWM1      TIM_OCMODE_ASYMMETRIC_PWM1
 #define TIM_OCMODE_ASSYMETRIC_PWM2      TIM_OCMODE_ASYMMETRIC_PWM2
 /**
diff --git a/Inc/stm32wbxx_hal_cortex.h b/Inc/stm32wbxx_hal_cortex.h
index 8664363..fb1555c 100644
--- a/Inc/stm32wbxx_hal_cortex.h
+++ b/Inc/stm32wbxx_hal_cortex.h
@@ -293,6 +293,8 @@
 #if (__MPU_PRESENT == 1U)
 void HAL_MPU_Enable(uint32_t MPU_Control);
 void HAL_MPU_Disable(void);
+void HAL_MPU_EnableRegion(uint32_t RegionNumber);
+void HAL_MPU_DisableRegion(uint32_t RegionNumber);
 void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
 #endif /* __MPU_PRESENT */
 /**
diff --git a/Inc/stm32wbxx_hal_cryp.h b/Inc/stm32wbxx_hal_cryp.h
index 8dc0f14..07b0ec6 100644
--- a/Inc/stm32wbxx_hal_cryp.h
+++ b/Inc/stm32wbxx_hal_cryp.h
@@ -53,7 +53,8 @@
   uint32_t DataType;                   /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
                                         This parameter can be a value of @ref CRYP_Data_Type */
   uint32_t KeySize;                    /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1.
-                                        128 or 256 bit key length in TinyAES This parameter can be a value of @ref CRYP_Key_Size */
+                                        128 or 256 bit key length in TinyAES
+                                        This parameter can be a value of @ref CRYP_Key_Size */
   uint32_t *pKey;                      /*!< The key used for encryption/decryption */
   uint32_t *pInitVect;                 /*!< The initialization vector used also as initialization
                                          counter in CTR mode */
diff --git a/Inc/stm32wbxx_hal_qspi.h b/Inc/stm32wbxx_hal_qspi.h
index ce9d996..54eb65f 100644
--- a/Inc/stm32wbxx_hal_qspi.h
+++ b/Inc/stm32wbxx_hal_qspi.h
@@ -589,13 +589,13 @@
   * @{
   */
 /* Peripheral Control and State functions  ************************************/
-HAL_QSPI_StateTypeDef HAL_QSPI_GetState        (QSPI_HandleTypeDef *hqspi);
-uint32_t              HAL_QSPI_GetError        (QSPI_HandleTypeDef *hqspi);
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState        (const QSPI_HandleTypeDef *hqspi);
+uint32_t              HAL_QSPI_GetError        (const QSPI_HandleTypeDef *hqspi);
 HAL_StatusTypeDef     HAL_QSPI_Abort           (QSPI_HandleTypeDef *hqspi);
 HAL_StatusTypeDef     HAL_QSPI_Abort_IT        (QSPI_HandleTypeDef *hqspi);
 void                  HAL_QSPI_SetTimeout      (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
 HAL_StatusTypeDef     HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold);
-uint32_t              HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi);
+uint32_t              HAL_QSPI_GetFifoThreshold(const QSPI_HandleTypeDef *hqspi);
 /**
   * @}
   */
diff --git a/Inc/stm32wbxx_hal_spi_ex.h b/Inc/stm32wbxx_hal_spi_ex.h
index 54cc0c5..946cbd0 100644
--- a/Inc/stm32wbxx_hal_spi_ex.h
+++ b/Inc/stm32wbxx_hal_spi_ex.h
@@ -48,7 +48,7 @@
 /** @addtogroup SPIEx_Exported_Functions_Group1
   * @{
   */
-HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi);
 /**
   * @}
   */
diff --git a/Inc/stm32wbxx_ll_rtc.h b/Inc/stm32wbxx_ll_rtc.h
index 0a59502..aeda9dd 100644
--- a/Inc/stm32wbxx_ll_rtc.h
+++ b/Inc/stm32wbxx_ll_rtc.h
@@ -1093,7 +1093,7 @@
 
 /**
   * @brief  Get time format (AM or PM notation)
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
   *       shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1127,7 +1127,7 @@
 
 /**
   * @brief  Get Hours in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
   *       shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1165,7 +1165,7 @@
 
 /**
   * @brief  Get Minutes in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
   *       shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1203,7 +1203,7 @@
 
 /**
   * @brief  Get Seconds in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
   *       shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1257,7 +1257,7 @@
 
 /**
   * @brief  Get time (hour, minute and second) in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
   *       shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1403,7 +1403,7 @@
 
 /**
   * @brief  Get Year in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format
   * @rmtoll DR           YT            LL_RTC_DATE_GetYear\n
@@ -1440,7 +1440,7 @@
 
 /**
   * @brief  Get Week day
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @rmtoll DR           WDU           LL_RTC_DATE_GetWeekDay
   * @param  RTCx RTC Instance
@@ -1487,7 +1487,7 @@
 
 /**
   * @brief  Get Month in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format
   * @rmtoll DR           MT            LL_RTC_DATE_GetMonth\n
@@ -1532,7 +1532,7 @@
 
 /**
   * @brief  Get Day in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
   * @rmtoll DR           DT            LL_RTC_DATE_GetDay\n
@@ -1598,7 +1598,7 @@
 
 /**
   * @brief  Get date (WeekDay, Day, Month and Year) in BCD format
-  * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+  * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
   *       before reading this bit
   * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH,
   * and __LL_RTC_GET_DAY are available to get independently each parameter.
diff --git a/Inc/stm32wbxx_ll_utils.h b/Inc/stm32wbxx_ll_utils.h
index 9742652..f9d186e 100644
--- a/Inc/stm32wbxx_ll_utils.h
+++ b/Inc/stm32wbxx_ll_utils.h
@@ -256,7 +256,7 @@
   * @param  HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq (HCLK1_Frequency field))
   * @note   When a RTOS is used, it is recommended to avoid changing the SysTick
   *         configuration by calling this function, for a delay use rather osDelay RTOS service.
-  * @param  Ticks Number of ticks
+  * @param  Ticks Frequency of Ticks (Hz)
   * @retval None
   */
 __STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
diff --git a/Release_Notes.html b/Release_Notes.html
index ad7371d..967724d 100644
--- a/Release_Notes.html
+++ b/Release_Notes.html
@@ -40,7 +40,7 @@
 <div class="col-sm-12 col-lg-8">
 <h1 id="update-history">Update History</h1>
 <div class="collapse">
-<input type="checkbox" id="collapse-section17" checked aria-hidden="true"> <label for="collapse-section17" aria-hidden="true">V1.14.1 / 31-October-2023</label>
+<input type="checkbox" id="collapse-section18" checked aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V1.14.2/ 07-February-2024</label>
 <div>
 <h2 id="main-changes">Main Changes</h2>
 <ul>
@@ -50,6 +50,68 @@
 <h2 id="contents">Contents</h2>
 <h3 id="hal-drivers-updates"><strong>HAL Drivers</strong> updates</h3>
 <ul>
+<li><strong>HAL GPIO</strong> driver
+<ul>
+<li>Replace GPIO_Pin_x with GPIO_PIN_x to be compliant with macros definition</li>
+</ul></li>
+<li><strong>HAL CRYP</strong> driver
+<ul>
+<li>Update CRYP_AESGCM_Process_IT() and CRYP_AESCCM_Process_IT() to prevent ‘Computation Completed’ IRQ from firing before the DINR pointer gets incremented.</li>
+</ul></li>
+<li><strong>HAL I2C</strong> driver
+<ul>
+<li>Update HAL_I2C_Slave_Transmit to check if the received NACK is the good one</li>
+</ul></li>
+<li><strong>HAL SMBUS</strong> driver
+<ul>
+<li>Update SMBUS_ITErrorHandler to flash TXDR just in case of error</li>
+</ul></li>
+<li><strong>HAL QSPI</strong> driver
+<ul>
+<li>HAL code quality enhancement for MISRA-C Rule-8.13 by adding const qualifiers</li>
+<li>Fix incorrect word ‘surcharged’ in functions headers</li>
+</ul></li>
+<li><strong>HAL CORTEX</strong> driver
+<ul>
+<li>Updated HAL_MPU_ConfigRegion() to allow the configuration of the MPU registers independently of the value of Enable/Disable field.</li>
+<li>Add new APIs HAL_MPU_EnableRegion() / HAL_MPU_DisableRegion().</li>
+</ul></li>
+<li><strong>HAL TIM</strong> driver
+<ul>
+<li>Update interrupt flag is cleared when the update event is generated by software.</li>
+<li>Fix typo in PWM asymmetric mode macros’ names.</li>
+</ul></li>
+<li><strong>HAL LPTIM</strong> driver
+<ul>
+<li>Removed redundant IS_LPTIM_AUTORELOAD macro.</li>
+</ul></li>
+</ul>
+<p><br />
+</p>
+<h3 id="ll-drivers-updates"><strong>LL Drivers</strong> updates</h3>
+<ul>
+<li><strong>LL UTILS</strong> driver
+<ul>
+<li>Fix a note about Ticks parameter.</li>
+</ul></li>
+</ul>
+<p><br />
+</p>
+<h2 id="backward-compatibility">Backward Compatibility</h2>
+<p>This release is compatible with the previous versions.</p>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section17" aria-hidden="true"> <label for="collapse-section17" aria-hidden="true">V1.14.1 / 01-November-2023</label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<ul>
+<li>Maintenance release of HAL and Low Layer drivers to include latest corrections</li>
+<li>HAL/LL code quality enhancement</li>
+</ul>
+<h2 id="contents-1">Contents</h2>
+<h3 id="hal-drivers-updates-1"><strong>HAL Drivers</strong> updates</h3>
+<ul>
 <li><strong>HAL I2C</strong> driver
 <ul>
 <li>Update I2C_Slave_ISR_IT, I2C_Slave_ISR_DMA and I2C_ITSlaveCplt to prevent the call of HAL_I2C_ListenCpltCallback twice</li>
@@ -83,7 +145,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-1"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL I2C</strong> driver
 <ul>
@@ -101,20 +163,20 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility">Backward Compatibility</h2>
+<h2 id="backward-compatibility-1">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section16"  aria-hidden="true"> <label for="collapse-section16" aria-hidden="true">V1.14.0 / 07-June-2023</label>
 <div>
-<h2 id="main-changes-1">Main Changes</h2>
+<h2 id="main-changes-2">Main Changes</h2>
 <ul>
 <li>Maintenance release of HAL and Low Layer drivers to include latest corrections</li>
 <li>HAL/LL code quality enhancement</li>
 </ul>
-<h2 id="contents-1">Contents</h2>
-<h3 id="hal-drivers-updates-1"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-2">Contents</h2>
+<h3 id="hal-drivers-updates-2"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL CRYP</strong> driver
 <ul>
@@ -153,7 +215,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates-1"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-2"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL USB</strong> driver
 <ul>
@@ -162,20 +224,20 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-1">Backward Compatibility</h2>
+<h2 id="backward-compatibility-2">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section15" aria-hidden="true"> <label for="collapse-section15" aria-hidden="true">V1.13.0 / 8-February-2023</label>
 <div>
-<h2 id="main-changes-2">Main Changes</h2>
+<h2 id="main-changes-3">Main Changes</h2>
 <ul>
 <li>Maintenance release of HAL and Low Layer drivers to include latest corrections</li>
 <li>HAL/LL code quality enhancement</li>
 </ul>
-<h2 id="contents-2">Contents</h2>
-<h3 id="hal-drivers-updates-2"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-3">Contents</h2>
+<h3 id="hal-drivers-updates-3"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL FLASH</strong> driver
 <ul>
@@ -206,20 +268,20 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-2">Backward Compatibility</h2>
+<h2 id="backward-compatibility-3">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section14" aria-hidden="true"> <label for="collapse-section14" aria-hidden="true">V1.12.0 / 09-November-2022</label>
 <div>
-<h2 id="main-changes-3">Main Changes</h2>
+<h2 id="main-changes-4">Main Changes</h2>
 <ul>
 <li>Maintenance release of HAL and Low Layer drivers to include latest corrections</li>
 <li>Remove HAL_LOCK/HAL_UNLOCK calls in HAL_xxxx_RegisterCallback &amp; HAL_xxxx_UnregisterCallback for IPs (IRDA, LPTIM, SMARTCARD, TIM, UART, USART)</li>
 </ul>
-<h2 id="contents-3">Contents</h2>
-<h3 id="hal-drivers-updates-3"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-4">Contents</h2>
+<h3 id="hal-drivers-updates-4"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL ADC</strong> driver
 <ul>
@@ -266,7 +328,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates-2"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-3"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL ADC</strong> driver
 <ul>
@@ -287,20 +349,20 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-3">Backward Compatibility</h2>
+<h2 id="backward-compatibility-4">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true">V1.11.0 / 01-June-2022</label>
 <div>
-<h2 id="main-changes-4">Main Changes</h2>
+<h2 id="main-changes-5">Main Changes</h2>
 <ul>
 <li>Maintenance release of HAL and Low Layer drivers to include latest corrections</li>
 <li>Correct English spelling errors and typos</li>
 </ul>
-<h2 id="contents-4">Contents</h2>
-<h3 id="hal-drivers-updates-4"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-5">Contents</h2>
+<h3 id="hal-drivers-updates-5"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL EXTI</strong> driver
 <ul>
@@ -376,7 +438,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates-3"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-4"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL I2C</strong> driver
 <ul>
@@ -412,19 +474,19 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-4">Backward Compatibility</h2>
+<h2 id="backward-compatibility-5">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V1.10.1 / 27-March-2022</label>
 <div>
-<h2 id="main-changes-5">Main Changes</h2>
+<h2 id="main-changes-6">Main Changes</h2>
 <ul>
 <li>Patch release of <strong>HAL and Low Layer</strong> drivers</li>
 </ul>
-<h2 id="contents-5">Contents</h2>
-<h3 id="hal-drivers-updates-5"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-6">Contents</h2>
+<h3 id="hal-drivers-updates-6"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL COMP</strong> driver
 <ul>
@@ -433,7 +495,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates-4"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-5"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL COMP</strong> driver
 <ul>
@@ -442,21 +504,21 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-5">Backward Compatibility</h2>
+<h2 id="backward-compatibility-6">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true">V1.10.0 / 12-November-2021</label>
 <div>
-<h2 id="main-changes-6">Main Changes</h2>
+<h2 id="main-changes-7">Main Changes</h2>
 <ul>
 <li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
 <li>All source files: update disclaimer to add reference to the new license agreement</li>
 <li>Correct English spelling errors and typos</li>
 </ul>
-<h2 id="contents-6">Contents</h2>
-<h3 id="hal-drivers-updates-6"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-7">Contents</h2>
+<h3 id="hal-drivers-updates-7"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL ADC</strong> driver
 <ul>
@@ -527,7 +589,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates-5"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-6"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL ADC</strong> driver
 <ul>
@@ -542,14 +604,14 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-6">Backward Compatibility</h2>
+<h2 id="backward-compatibility-7">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true">V1.9.0 / 24-June-2021</label>
 <div>
-<h2 id="main-changes-7">Main Changes</h2>
+<h2 id="main-changes-8">Main Changes</h2>
 <ul>
 <li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
 <li>Update of HAL SMBUS driver to introduce fast mode and fast mode plus
@@ -563,8 +625,8 @@
 </ul>
 <p><br />
 </p>
-<h2 id="contents-7">Contents</h2>
-<h3 id="hal-drivers-updates-7"><strong>HAL Drivers</strong> updates</h3>
+<h2 id="contents-8">Contents</h2>
+<h3 id="hal-drivers-updates-8"><strong>HAL Drivers</strong> updates</h3>
 <ul>
 <li><strong>HAL CORTEX</strong> driver
 <ul>
@@ -640,7 +702,7 @@
 </ul>
 <p><br />
 </p>
-<h3 id="ll-drivers-updates-6"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-7"><strong>LL Drivers</strong> updates</h3>
 <ul>
 <li><strong>LL DMA</strong> driver
 <ul>
@@ -667,14 +729,14 @@
 </ul>
 <p><br />
 </p>
-<h2 id="backward-compatibility-7">Backward Compatibility</h2>
+<h2 id="backward-compatibility-8">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">v1.8.0 / 12-February-2021</label>
 <div>
-<h2 id="main-changes-8">Main Changes</h2>
+<h2 id="main-changes-9">Main Changes</h2>
 <h3 id="add-support-for-stm32wb15xx-and-stm32wb10xx">Add support for STM32WB15xx and STM32WB10xx</h3>
 <table>
 <thead>
@@ -810,14 +872,14 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-8">Backward Compatibility</h2>
+<h2 id="backward-compatibility-9">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section8"  aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">v1.7.0 / 30-October-2020</label>
 <div>
-<h2 id="main-changes-9">Main Changes</h2>
+<h2 id="main-changes-10">Main Changes</h2>
 <h3 id="maitenance-release">Maitenance release</h3>
 <p>All peripheral</p>
 <table>
@@ -890,14 +952,14 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-9">Backward Compatibility</h2>
+<h2 id="backward-compatibility-10">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">v1.6.0 / 05-June-2020</label>
 <div>
-<h2 id="main-changes-10">Main Changes</h2>
+<h2 id="main-changes-11">Main Changes</h2>
 <h3 id="maitenance-release-1">Maitenance release</h3>
 <p>All peripheral</p>
 <table>
@@ -1002,14 +1064,14 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-10">Backward Compatibility</h2>
+<h2 id="backward-compatibility-11">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">v1.5.0 / 12-February-2020</label>
 <div>
-<h2 id="main-changes-11">Main Changes</h2>
+<h2 id="main-changes-12">Main Changes</h2>
 <h3 id="introduction-of-stm32wb5m-stm32wb35xx-and-stm32wb30xx-product">Introduction of STM32WB5M, STM32WB35xx and STM32WB30xx product</h3>
 <p>This release introduce the support of STM32WB5Mxx, STM32WB35xx product and its value line STM32WB30xx.</p>
 <p>Added features:</p>
@@ -1054,14 +1116,14 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-11">Backward Compatibility</h2>
+<h2 id="backward-compatibility-12">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section5"  aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">v1.4.0 / 15-December-2019</label>
 <div>
-<h2 id="main-changes-12">Main Changes</h2>
+<h2 id="main-changes-13">Main Changes</h2>
 <h3 id="maitenance-release-2">Maitenance release</h3>
 <table>
 <thead>
@@ -1105,7 +1167,7 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-12">Backward Compatibility</h2>
+<h2 id="backward-compatibility-13">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 <h2 id="dependencies">Dependencies</h2>
 <p>This software release is compatible with:</p>
@@ -1115,7 +1177,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">v1.3.0 / 11-September-2019</label>
 <div>
-<h2 id="main-changes-13">Main Changes</h2>
+<h2 id="main-changes-14">Main Changes</h2>
 <h3 id="maitenance-release-3">Maitenance release</h3>
 <table>
 <thead>
@@ -1187,7 +1249,7 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-13">Backward Compatibility</h2>
+<h2 id="backward-compatibility-14">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 <h2 id="dependencies-1">Dependencies</h2>
 <p>This software release is compatible with:</p>
@@ -1197,7 +1259,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.2.0 / 26-June-2019</label>
 <div>
-<h2 id="main-changes-14">Main Changes</h2>
+<h2 id="main-changes-15">Main Changes</h2>
 <h3 id="stm32wb50xx-introduction-and-maintenance-release">STM32WB50xx introduction and maintenance release</h3>
 <p>First release for STM32WBxx HAL drivers introducing <strong>stm32wb50xx</strong> devices.</p>
 <table>
@@ -1266,7 +1328,7 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-14">Backward Compatibility</h2>
+<h2 id="backward-compatibility-15">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 <h2 id="dependencies-2">Dependencies</h2>
 <p>This software release is compatible with:</p>
@@ -1276,7 +1338,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 05-April-2019</label>
 <div>
-<h2 id="main-changes-15">Main Changes</h2>
+<h2 id="main-changes-16">Main Changes</h2>
 <h3 id="maintenance-release">Maintenance release</h3>
 <p>Maintenance release of HAL and Low layers drivers supporting STM32WB55xx devices.</p>
 <table>
@@ -1330,7 +1392,7 @@
 </tr>
 </tbody>
 </table>
-<h2 id="backward-compatibility-15">Backward Compatibility</h2>
+<h2 id="backward-compatibility-16">Backward Compatibility</h2>
 <p>This release is compatible with the previous versions.</p>
 <h2 id="dependencies-3">Dependencies</h2>
 <p>This software release is compatible with:</p>
@@ -1340,7 +1402,7 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section1"  aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 06-February-2019</label>
 <div>
-<h2 id="main-changes-16">Main Changes</h2>
+<h2 id="main-changes-17">Main Changes</h2>
 <h3 id="first-release">First release</h3>
 <p>First official release of HAL (Hardware Abstraction Layer) and LL (Low layers) drivers to support STM32WB55xx.</p>
 </div>
diff --git a/Src/stm32wbxx_hal.c b/Src/stm32wbxx_hal.c
index ec62ac7..e19fb9a 100644
--- a/Src/stm32wbxx_hal.c
+++ b/Src/stm32wbxx_hal.c
@@ -56,7 +56,7 @@
    */
 #define __STM32WBxx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
 #define __STM32WBxx_HAL_VERSION_SUB1   (0x0EU) /*!< [23:16] sub1 version */
-#define __STM32WBxx_HAL_VERSION_SUB2   (0x01U) /*!< [15:8]  sub2 version */
+#define __STM32WBxx_HAL_VERSION_SUB2   (0x02U) /*!< [15:8]  sub2 version */
 #define __STM32WBxx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32WBxx_HAL_VERSION         ((__STM32WBxx_HAL_VERSION_MAIN << 24U)\
                                          |(__STM32WBxx_HAL_VERSION_SUB1 << 16U)\
diff --git a/Src/stm32wbxx_hal_cortex.c b/Src/stm32wbxx_hal_cortex.c
index 3e2384e..5c34a39 100644
--- a/Src/stm32wbxx_hal_cortex.c
+++ b/Src/stm32wbxx_hal_cortex.c
@@ -416,6 +416,38 @@
 }
 
 /**
+  * @brief  Enable the MPU Region.
+  * @retval None
+  */
+void HAL_MPU_EnableRegion(uint32_t RegionNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(RegionNumber));
+
+  /* Set the Region number */
+  MPU->RNR = RegionNumber;
+
+  /* Enable the Region */
+  SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @brief  Disable the MPU Region.
+  * @retval None
+  */
+void HAL_MPU_DisableRegion(uint32_t RegionNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(RegionNumber));
+
+  /* Set the Region number */
+  MPU->RNR = RegionNumber;
+
+  /* Disable the Region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
   * @brief  Initialize and configure the Region and the memory to be protected.
   * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
   *                the initialization and configuration information.
@@ -426,38 +458,32 @@
   /* Check the parameters */
   assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
   assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+  assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+  assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+  assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+  assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+  assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+  assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+  assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+  assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
 
   /* Set the Region number */
   MPU->RNR = MPU_Init->Number;
 
-  if ((MPU_Init->Enable) != 0U)
-  {
-    /* Check the parameters */
-    assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
-    assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
-    assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
-    assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
-    assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
-    assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
-    assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
-    assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+  /* Disable the Region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
 
-    MPU->RBAR = MPU_Init->BaseAddress;
-    MPU->RASR = ((uint32_t)MPU_Init->DisableExec             << MPU_RASR_XN_Pos)   |
-                ((uint32_t)MPU_Init->AccessPermission        << MPU_RASR_AP_Pos)   |
-                ((uint32_t)MPU_Init->TypeExtField            << MPU_RASR_TEX_Pos)  |
-                ((uint32_t)MPU_Init->IsShareable             << MPU_RASR_S_Pos)    |
-                ((uint32_t)MPU_Init->IsCacheable             << MPU_RASR_C_Pos)    |
-                ((uint32_t)MPU_Init->IsBufferable            << MPU_RASR_B_Pos)    |
-                ((uint32_t)MPU_Init->SubRegionDisable        << MPU_RASR_SRD_Pos)  |
-                ((uint32_t)MPU_Init->Size                    << MPU_RASR_SIZE_Pos) |
-                ((uint32_t)MPU_Init->Enable                  << MPU_RASR_ENABLE_Pos);
-  }
-  else
-  {
-    MPU->RBAR = 0x00U;
-    MPU->RASR = 0x00U;
-  }
+  /* Apply configuration */
+  MPU->RBAR = MPU_Init->BaseAddress;
+  MPU->RASR = ((uint32_t)MPU_Init->DisableExec             << MPU_RASR_XN_Pos)   |
+              ((uint32_t)MPU_Init->AccessPermission        << MPU_RASR_AP_Pos)   |
+              ((uint32_t)MPU_Init->TypeExtField            << MPU_RASR_TEX_Pos)  |
+              ((uint32_t)MPU_Init->IsShareable             << MPU_RASR_S_Pos)    |
+              ((uint32_t)MPU_Init->IsCacheable             << MPU_RASR_C_Pos)    |
+              ((uint32_t)MPU_Init->IsBufferable            << MPU_RASR_B_Pos)    |
+              ((uint32_t)MPU_Init->SubRegionDisable        << MPU_RASR_SRD_Pos)  |
+              ((uint32_t)MPU_Init->Size                    << MPU_RASR_SIZE_Pos) |
+              ((uint32_t)MPU_Init->Enable                  << MPU_RASR_ENABLE_Pos);
 }
 #endif /* __MPU_PRESENT */
 
diff --git a/Src/stm32wbxx_hal_crc.c b/Src/stm32wbxx_hal_crc.c
index d1b1b63..d7882aa 100644
--- a/Src/stm32wbxx_hal_crc.c
+++ b/Src/stm32wbxx_hal_crc.c
@@ -200,7 +200,7 @@
   __HAL_CRC_DR_RESET(hcrc);
 
   /* Reset IDR register content */
-  CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR);
+  CLEAR_REG(hcrc->Instance->IDR);
 
   /* DeInit the low level hardware */
   HAL_CRC_MspDeInit(hcrc);
diff --git a/Src/stm32wbxx_hal_cryp.c b/Src/stm32wbxx_hal_cryp.c
index 938dc2e..a1dd12c 100644
--- a/Src/stm32wbxx_hal_cryp.c
+++ b/Src/stm32wbxx_hal_cryp.c
@@ -30,7 +30,8 @@
       The CRYP HAL driver can be used in CRYP or TinyAES peripheral as follows:
 
       (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
-         (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()or __HAL_RCC_AES_CLK_ENABLE for TinyAES peripheral
+         (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+              or __HAL_RCC_AES_CLK_ENABLE for TinyAES peripheral
          (##) In case of using interrupts (e.g. HAL_CRYP_Encrypt_IT())
              (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
              (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
@@ -58,8 +59,10 @@
          (##) The DataWidthUnit field. It specifies whether the data length (or the payload length for authentication
                algorithms) is in words or bytes.
          (##) The Header used only in AES GCM and CCM Algorithm for authentication.
-         (##) The HeaderSize providing the size of the header buffer in words or bytes, depending upon HeaderWidthUnit field.
-         (##) The HeaderWidthUnit field. It specifies whether the header length (for authentication algorithms) is in words or bytes.
+         (##) The HeaderSize providing the size of the header buffer in words or bytes,
+              depending upon HeaderWidthUnit field.
+         (##) The HeaderWidthUnit field. It specifies whether the header length (for authentication algorithms)
+              is in words or bytes.
          (##) The B0 block is the first authentication block used only in AES CCM mode.
          (##) The KeyIVConfigSkip used to process several messages in a row (please see more information below).
 
@@ -316,7 +319,8 @@
   * @{
   */
 #define CRYP_TIMEOUT_KEYPREPARATION      82U         /* The latency of key preparation operation is 82 clock cycles.*/
-#define CRYP_TIMEOUT_GCMCCMINITPHASE     299U        /* The latency of  GCM/CCM init phase to prepare hash subkey is 299 clock cycles.*/
+#define CRYP_TIMEOUT_GCMCCMINITPHASE     299U        /* The latency of  GCM/CCM init phase to prepare hash subkey 
+                                                        is 299 clock cycles.*/
 #define CRYP_TIMEOUT_GCMCCMHEADERPHASE   290U        /* The latency of  GCM/CCM header phase is 290 clock cycles.*/
 
 #define CRYP_PHASE_READY                 0x00000001U /*!< CRYP peripheral is ready for initialization. */
@@ -350,7 +354,8 @@
   * @{
   */
 
-#define CRYP_SET_PHASE(__HANDLE__, __PHASE__)   MODIFY_REG((__HANDLE__)->Instance->CR, AES_CR_GCMPH, (uint32_t)(__PHASE__))
+#define CRYP_SET_PHASE(__HANDLE__, __PHASE__)   MODIFY_REG((__HANDLE__)->Instance->CR,\
+                                                           AES_CR_GCMPH, (uint32_t)(__PHASE__))
 
 /**
   * @}
@@ -923,8 +928,6 @@
   hcryp->SuspendRequest = HAL_CRYP_SUSPEND;
 }
 
-
-
 /**
   * @brief  CRYP processing suspension and peripheral internal parameters storage.
   * @param  hcryp pointer to a CRYP_HandleTypeDef structure that contains
@@ -977,7 +980,8 @@
     hcryp->CrypOutCount_saved      = hcryp->CrypOutCount;
     hcryp->Phase_saved             = hcryp->Phase;
     hcryp->State_saved             = hcryp->State;
-    hcryp->Size_saved              = ((hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? (hcryp->Size / 4U) : hcryp->Size);
+    hcryp->Size_saved              = ((hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? \
+                                      (hcryp->Size / 4U) : hcryp->Size);
     hcryp->SizesSum_saved          = hcryp->SizesSum;
     hcryp->AutoKeyDerivation_saved = hcryp->AutoKeyDerivation;
     hcryp->CrypHeaderCount_saved   = hcryp->CrypHeaderCount;
@@ -1068,14 +1072,16 @@
     hcryp->ResumingFlag = 1U;
     if (READ_BIT(hcryp->CR_saved, AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT)
     {
-      if (HAL_CRYP_Encrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, hcryp->pCrypOutBuffPtr_saved) != HAL_OK)
+      if (HAL_CRYP_Encrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, \
+                              hcryp->pCrypOutBuffPtr_saved) != HAL_OK)
       {
         return HAL_ERROR;
       }
     }
     else
     {
-      if (HAL_CRYP_Decrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, hcryp->pCrypOutBuffPtr_saved) != HAL_OK)
+      if (HAL_CRYP_Decrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, \
+                              hcryp->pCrypOutBuffPtr_saved) != HAL_OK)
       {
         return HAL_ERROR;
       }
@@ -1708,7 +1714,8 @@
         hcryp->Phase = CRYP_PHASE_PROCESS;
 
         /* Start DMA process transfer for AES */
-        CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr));
+        CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), \
+                          (uint32_t)(hcryp->pCrypOutBuffPtr));
         status = HAL_OK;
         break;
 
@@ -1861,25 +1868,27 @@
   */
 void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
 {
+  uint32_t itsource = hcryp->Instance->CR;
+  uint32_t itflag   = hcryp->Instance->SR;
 
   /* Check if error occurred */
-  if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_ERRIE) != RESET)
+  if ((itsource & CRYP_IT_ERRIE) == CRYP_IT_ERRIE)
   {
     /* If write Error occurred */
-    if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_WRERR) != RESET)
+    if ((itflag & CRYP_IT_WRERR) == CRYP_IT_WRERR)
     {
       hcryp->ErrorCode |= HAL_CRYP_ERROR_WRITE;
     }
     /* If read Error occurred */
-    if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_RDERR) != RESET)
+    if ((itflag & CRYP_IT_RDERR) == CRYP_IT_RDERR)
     {
       hcryp->ErrorCode |= HAL_CRYP_ERROR_READ;
     }
   }
 
-  if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_CCF) != RESET)
+  if ((itflag & CRYP_IT_CCF) == CRYP_IT_CCF)
   {
-    if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_CCFIE) != RESET)
+    if ((itsource & CRYP_IT_CCFIE) == CRYP_IT_CCFIE)
     {
       /* Clear computation complete flag */
       __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR);
@@ -2685,7 +2694,8 @@
     /*Read the output block from the output FIFO */
     for (count = 0U; count < 4U; count++)
     {
-      /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */
+      /* Read the output block from the output FIFO and put them in temporary buffer
+         then get CrypOutBuff from temporary buffer */
       temp[count] = hcryp->Instance->DOUTR;
     }
 
@@ -2896,7 +2906,8 @@
   /* Clear CCF Flag */
   __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR);
 
-  /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/
+  /* Read the output block from the output FIFO and put them in temporary buffer
+     then get CrypOutBuff from temporary buffer*/
   for (i = 0U; i < 4U; i++)
   {
     temp[i] = hcryp->Instance->DOUTR;
@@ -2925,7 +2936,8 @@
 
   if (hcryp->State == HAL_CRYP_STATE_BUSY)
   {
-    /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/
+    /* Read the output block from the output FIFO and put them in temporary buffer
+       then get CrypOutBuff from temporary buffer*/
     for (i = 0U; i < 4U; i++)
     {
       temp[i] = hcryp->Instance->DOUTR;
@@ -3251,7 +3263,8 @@
     /*Read the output block from the output FIFO */
     for (index = 0U; index < 4U; index++)
     {
-      /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */
+      /* Read the output block from the output FIFO and put them in temporary buffer
+         then get CrypOutBuff from temporary buffer */
       temp[index] = hcryp->Instance->DOUTR;
     }
     for (index = 0U; index < lastwordsize; index++)
@@ -3920,7 +3933,8 @@
 
     for (loopcounter = 0U; loopcounter < 4U; loopcounter++)
     {
-      /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */
+      /* Read the output block from the output FIFO and put them in temporary buffer
+         then get CrypOutBuff from temporary buffer */
       temp[loopcounter] = hcryp->Instance->DOUTR;
     }
     for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++)
@@ -4414,7 +4428,8 @@
 
   /***************************** Payload phase *******************************/
 
-  /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/
+  /* Read the output block from the output FIFO and put them in temporary buffer
+     then get CrypOutBuff from temporary buffer*/
   for (i = 0U; i < 4U; i++)
   {
     temp[i] = hcryp->Instance->DOUTR;
@@ -4653,7 +4668,8 @@
     /*Read the output block from the output FIFO */
     for (index = 0U; index < 4U; index++)
     {
-      /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */
+      /* Read the output block from the output FIFO and put them in temporary buffer
+         then get CrypOutBuff from temporary buffer */
       temp[index] = hcryp->Instance->DOUTR;
     }
     for (index = 0U; index < lastwordsize; index++)
diff --git a/Src/stm32wbxx_hal_gpio.c b/Src/stm32wbxx_hal_gpio.c
index 90af8ea..564acc3 100644
--- a/Src/stm32wbxx_hal_gpio.c
+++ b/Src/stm32wbxx_hal_gpio.c
@@ -420,9 +420,9 @@
   *         accesses.
   * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32WLxx family
   * @param  PinReset specifies the port bits to be reset
-  *         This parameter can be any combination of GPIO_Pin_x where x can be (0..15) or zero.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15) or zero.
   * @param  PinSet specifies the port bits to be set
-  *         This parameter can be any combination of GPIO_Pin_x where x can be (0..15) or zero.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15) or zero.
   * @note   Both PinReset and PinSet combinations shall not get any common bit, else
   *         assert would be triggered.
   * @note   At least one of the two parameters used to set or reset shall be different from zero.
@@ -469,7 +469,7 @@
   *         until the next reset.
   * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32WBxx family
   * @param GPIO_Pin specifies the port bits to be locked.
-  *         This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
   * @retval None
   */
 HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
diff --git a/Src/stm32wbxx_hal_i2c.c b/Src/stm32wbxx_hal_i2c.c
index 05f58e6..de3805e 100644
--- a/Src/stm32wbxx_hal_i2c.c
+++ b/Src/stm32wbxx_hal_i2c.c
@@ -1385,6 +1385,8 @@
                                          uint32_t Timeout)
 {
   uint32_t tickstart;
+  uint16_t tmpXferCount;
+  HAL_StatusTypeDef error;
 
   if (hi2c->State == HAL_I2C_STATE_READY)
   {
@@ -1478,31 +1480,48 @@
     }
 
     /* Wait until AF flag is set */
-    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK)
+    error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart);
+
+    if (error != HAL_OK)
     {
-      /* Disable Address Acknowledge */
-      hi2c->Instance->CR2 |= I2C_CR2_NACK;
-      return HAL_ERROR;
+      /* Check that I2C transfer finished */
+      /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+      /* Mean XferCount == 0 */
+
+      tmpXferCount = hi2c->XferCount;
+      if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U))
+      {
+        /* Reset ErrorCode to NONE */
+        hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+      }
+      else
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        return HAL_ERROR;
+      }
     }
-
-    /* Flush TX register */
-    I2C_Flush_TXDR(hi2c);
-
-    /* Clear AF flag */
-    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
-
-    /* Wait until STOP flag is set */
-    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    else
     {
-      /* Disable Address Acknowledge */
-      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      /* Flush TX register */
+      I2C_Flush_TXDR(hi2c);
 
-      return HAL_ERROR;
+      /* Clear AF flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+      /* Wait until STOP flag is set */
+      if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+        return HAL_ERROR;
+      }
+
+      /* Clear STOP flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
     }
 
-    /* Clear STOP flag */
-    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
-
     /* Wait until BUSY flag is reset */
     if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
     {
diff --git a/Src/stm32wbxx_hal_qspi.c b/Src/stm32wbxx_hal_qspi.c
index 58c87ae..c754086 100644
--- a/Src/stm32wbxx_hal_qspi.c
+++ b/Src/stm32wbxx_hal_qspi.c
@@ -2219,7 +2219,7 @@
   * @param  hqspi QSPI handle
   * @retval HAL state
   */
-HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi)
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(const QSPI_HandleTypeDef *hqspi)
 {
   /* Return QSPI handle state */
   return hqspi->State;
@@ -2230,7 +2230,7 @@
 * @param  hqspi QSPI handle
 * @retval QSPI Error Code
 */
-uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi)
+uint32_t HAL_QSPI_GetError(const QSPI_HandleTypeDef *hqspi)
 {
   return hqspi->ErrorCode;
 }
@@ -2410,7 +2410,7 @@
   * @param  hqspi QSPI handle.
   * @retval Fifo threshold (value between 1 and 16)
   */
-uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi)
+uint32_t HAL_QSPI_GetFifoThreshold(const QSPI_HandleTypeDef *hqspi)
 {
   return ((READ_BIT(hqspi->Instance->CR, QUADSPI_CR_FTHRES) >> QUADSPI_CR_FTHRES_Pos) + 1U);
 }
diff --git a/Src/stm32wbxx_hal_smbus.c b/Src/stm32wbxx_hal_smbus.c
index 84f9329..9751bdb 100644
--- a/Src/stm32wbxx_hal_smbus.c
+++ b/Src/stm32wbxx_hal_smbus.c
@@ -2619,8 +2619,11 @@
     __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR);
   }
 
-  /* Flush TX register */
-  SMBUS_Flush_TXDR(hsmbus);
+  if (hsmbus->ErrorCode != HAL_SMBUS_ERROR_NONE)
+  {
+    /* Flush TX register */
+    SMBUS_Flush_TXDR(hsmbus);
+  }
 
   /* Store current volatile hsmbus->ErrorCode, misra rule */
   tmperror = hsmbus->ErrorCode;
diff --git a/Src/stm32wbxx_hal_spi_ex.c b/Src/stm32wbxx_hal_spi_ex.c
index f51957d..f8a8a9f 100644
--- a/Src/stm32wbxx_hal_spi_ex.c
+++ b/Src/stm32wbxx_hal_spi_ex.c
@@ -76,7 +76,7 @@
   *               the configuration information for the specified SPI module.
   * @retval HAL status
   */
-HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi)
+HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi)
 {
   __IO uint32_t tmpreg;
   uint8_t  count = 0U;