/**
  ******************************************************************************
  * @file    stm32wlxx_ll_utils.h
  * @author  MCD Application Team
  * @brief   Header file of UTILS LL module.
  @verbatim
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
    [..]
    The LL UTILS driver contains a set of generic APIs that can be
    used by user:
      (+) Device electronic signature
      (+) Timing functions
      (+) PLL configuration functions

  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                       opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32WLxx_LL_UTILS_H
#define __STM32WLxx_LL_UTILS_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32wlxx.h"

/** @addtogroup STM32WLxx_LL_Driver
  * @{
  */

/** @defgroup UTILS_LL UTILS
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/

/* Private constants ---------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
  * @{
  */

/* Max delay can be used in LL_mDelay */
#define LL_MAX_DELAY                  0xFFFFFFFFU

/**
  * @brief Unique device ID register base address
  */
#define UID_BASE_ADDRESS              UID_BASE

/**
  * @brief Flash size data register base address
  */
#define FLASHSIZE_BASE_ADDRESS        FLASHSIZE_BASE

/**
  * @brief Package data register base address
  */
#define PACKAGE_BASE_ADDRESS          PACKAGE_BASE

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
  * @{
  */
/**
  * @}
  */
/* Exported types ------------------------------------------------------------*/
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
  * @{
  */
/**
  * @brief  UTILS PLL structure definition
  */
typedef struct
{
  uint32_t PLLM;   /*!< Division factor for PLL VCO input clock.
                        This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV

                        This feature can be modified afterwards using unitary function
                        @ref LL_RCC_PLL_ConfigDomain_SYS(). */

  uint32_t PLLN;   /*!< Multiplication factor for PLL VCO output clock.
                        This parameter must be a number between Min_Data = 6 and Max_Data = 127

                        This feature can be modified afterwards using unitary function
                        @ref LL_RCC_PLL_ConfigDomain_SYS(). */

  uint32_t PLLR;   /*!< Division for the main system clock.
                        This parameter can be a value of @ref RCC_LL_EC_PLLR_DIV

                        This feature can be modified afterwards using unitary function
                        @ref LL_RCC_PLL_ConfigDomain_SYS(). */
} LL_UTILS_PLLInitTypeDef;

/**
  * @brief  UTILS System, AHB and APB buses clock configuration structure definition
  */
typedef struct
{
  uint32_t CPU1CLKDivider;         /*!< The CPU1 clock (HCLK1) divider. This clock is derived from the system clock
                                       (SYSCLK).
                                        This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV

                                        This feature can be modified afterwards using unitary function
                                        @ref LL_RCC_SetAHBPrescaler(). */

#if defined(DUAL_CORE)
  uint32_t CPU2CLKDivider;         /*!< The CPU2 clock (HCLK2) divider. This clock is derived from the system clock
                                        (SYSCLK).
                                        This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV

                                        This feature can be modified afterwards using unitary function
                                        @ref LL_C2_RCC_SetAHBPrescaler(). */
#endif /* DUAL_CORE */

  uint32_t AHB3CLKDivider;         /*!< The AHBS clock (HCLK3) divider. This clock is derived from the system clock
                                        (SYSCLK).
                                        This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV

                                        This feature can be modified afterwards using unitary function
                                        @ref LL_RCC_SetAHB3Prescaler(). */

  uint32_t APB1CLKDivider;        /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK1).
                                       This parameter can be a value of @ref RCC_LL_EC_APB1_DIV

                                       This feature can be modified afterwards using unitary function
                                       @ref LL_RCC_SetAPB1Prescaler(). */

  uint32_t APB2CLKDivider;        /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK1).
                                       This parameter can be a value of @ref RCC_LL_EC_APB2_DIV

                                       This feature can be modified afterwards using unitary function
                                       @ref LL_RCC_SetAPB2Prescaler(). */

} LL_UTILS_ClkInitTypeDef;

/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
  * @{
  */

/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
  * @{
  */
#define LL_UTILS_HSEBYPASS_OFF        0x00000000U       /*!< HSE Bypass is not enabled                */
#define LL_UTILS_HSEBYPASS_ON         0x00000001U       /*!< HSE Bypass is enabled                    */
/**
  * @}
  */

/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
  * @{
  */
#define LL_UTILS_PACKAGETYPE_UFBGA73        0x00000000U /*!< UFBGA73  package type */
#define LL_UTILS_PACKAGETYPE_WLCSP59        0x00000002U /*!< WLSCSP59 package type */
#define LL_UTILS_PACKAGETYPE_UFQFPN48       0x00000010U /*!< UFQPFN48 package type */
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
  * @{
  */

/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
  * @{
  */
/**
  * @brief  Get Word0 of the unique device identifier (UID based on 96 bits)
  * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format
  */
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
{
  return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
}

/**
  * @brief  Get Word1 of the unique device identifier (UID based on 96 bits)
  * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40])
  */
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
{
  return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
}

/**
  * @brief  Get Word2 of the unique device identifier (UID based on 96 bits)
  * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24]
  */
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
{
  return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
}

/**
  * @brief  Get Flash memory size
  * @note   This bitfield indicates the size of the device Flash memory expressed in
  *         Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
  * @retval FLASH_SIZE[15:0]: Flash memory size
  */
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
{
  return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFFUL);
}

/**
  * @brief  Get Package type
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_UTILS_PACKAGETYPE_UFBGA73
  *         @arg @ref LL_UTILS_PACKAGETYPE_UFQFPN48
  *         @arg @ref LL_UTILS_PACKAGETYPE_WLCSP59
  *
  */
__STATIC_INLINE uint32_t LL_GetPackageType(void)
{
  return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU);
}

/**
  * @}
  */

/** @defgroup UTILS_LL_EF_DELAY DELAY
  * @{
  */
#if defined(CORE_CM0PLUS)
/**
  * @brief  This function configures the Cortex-M SysTick source of the time base.
  * @param  HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro or function
  *         @ref LL_RCC_GetSystemClocksFreq (HCLK2_Frequency field))
  * @note   When a RTOS is used, it is recommended to avoid changing the SysTick
  *         configuration by calling this function, for a delay use rather osDelay RTOS service.
  * @param  Ticks Number of ticks
  * @retval None
  */
#else
/**
  * @brief  This function configures the Cortex-M SysTick source of the time base.
  * @param  HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro or function
  *         @ref LL_RCC_GetSystemClocksFreq (HCLK1_Frequency field))
  * @note   When a RTOS is used, it is recommended to avoid changing the SysTick
  *         configuration by calling this function, for a delay use rather osDelay RTOS service.
  * @param  Ticks Number of ticks
  * @retval None
  */
#endif /* CORE_CM0PLUS */
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
{
  if (Ticks > 0U)
  {
    /* Configure the SysTick to have interrupt in 1ms time base */
    SysTick->LOAD  = (uint32_t)((HCLKFrequency / Ticks) - 1UL);  /* set reload register */
    SysTick->VAL   = 0UL;                                       /* Load the SysTick Counter Value */
    SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
                     SysTick_CTRL_ENABLE_Msk;                   /* Enable the Systick Timer */
  }
}

void        LL_Init1msTick(uint32_t HCLKFrequency);

void        LL_mDelay(uint32_t Delay);

/**
  * @}
  */

/** @defgroup UTILS_EF_SYSTEM SYSTEM
  * @{
  */

void        LL_SetSystemCoreClock(uint32_t HCLKFrequency);
ErrorStatus LL_SetFlashLatency(uint32_t HCLK3_Frequency);
ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
                                         LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
                                         LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
ErrorStatus LL_PLL_ConfigSystemClock_HSE(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
                                         LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);


/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32WLxx_LL_UTILS_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/