# Copyright 2018 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Rules for building wheels."""

load("//python/private:stamp.bzl", "is_stamping_enabled")

PyWheelInfo = provider(
    doc = "Information about a wheel produced by `py_wheel`",
    fields = {
        "name_file": (
            "File: A file containing the canonical name of the wheel (after " +
            "stamping, if enabled)."
        ),
        "wheel": "File: The wheel file itself.",
    },
)

def _path_inside_wheel(input_file):
    # input_file.short_path is sometimes relative ("../${repository_root}/foobar")
    # which is not a valid path within a zip file. Fix that.
    short_path = input_file.short_path
    if short_path.startswith("..") and len(short_path) >= 3:
        # Path separator. '/' on linux.
        separator = short_path[2]

        # Consume '../' part.
        short_path = short_path[3:]

        # Find position of next '/' and consume everything up to that character.
        pos = short_path.find(separator)
        short_path = short_path[pos + 1:]
    return short_path

def _input_file_to_arg(input_file):
    """Converts a File object to string for --input_file argument to wheelmaker"""
    return "%s;%s" % (_path_inside_wheel(input_file), input_file.path)

def _py_package_impl(ctx):
    inputs = depset(
        transitive = [dep[DefaultInfo].data_runfiles.files for dep in ctx.attr.deps] +
                     [dep[DefaultInfo].default_runfiles.files for dep in ctx.attr.deps],
    )

    # TODO: '/' is wrong on windows, but the path separator is not available in starlark.
    # Fix this once ctx.configuration has directory separator information.
    packages = [p.replace(".", "/") for p in ctx.attr.packages]
    if not packages:
        filtered_inputs = inputs
    else:
        filtered_files = []

        # TODO: flattening depset to list gives poor performance,
        for input_file in inputs.to_list():
            wheel_path = _path_inside_wheel(input_file)
            for package in packages:
                if wheel_path.startswith(package):
                    filtered_files.append(input_file)
        filtered_inputs = depset(direct = filtered_files)

    return [DefaultInfo(
        files = filtered_inputs,
    )]

py_package = rule(
    implementation = _py_package_impl,
    doc = """\
A rule to select all files in transitive dependencies of deps which
belong to given set of Python packages.

This rule is intended to be used as data dependency to py_wheel rule
""",
    attrs = {
        "deps": attr.label_list(
            doc = "",
        ),
        "packages": attr.string_list(
            mandatory = False,
            allow_empty = True,
            doc = """\
List of Python packages to include in the distribution.
Sub-packages are automatically included.
""",
        ),
    },
)

def _escape_filename_segment(segment):
    """Escape a segment of the wheel filename.

    See https://www.python.org/dev/peps/pep-0427/#escaping-and-unicode
    """

    # TODO: this is wrong, isalnum replaces non-ascii letters, while we should
    # not replace them.
    # TODO: replace this with a regexp once starlark supports them.
    escaped = ""
    for character in segment.elems():
        # isalnum doesn't handle unicode characters properly.
        if character.isalnum() or character == ".":
            escaped += character
        elif not escaped.endswith("_"):
            escaped += "_"
    return escaped

def _replace_make_variables(flag, ctx):
    """Replace $(VERSION) etc make variables in flag"""
    if "$" in flag:
        for varname, varsub in ctx.var.items():
            flag = flag.replace("$(%s)" % varname, varsub)
    return flag

def _py_wheel_impl(ctx):
    version = _replace_make_variables(ctx.attr.version, ctx)
    outfile = ctx.actions.declare_file("-".join([
        _escape_filename_segment(ctx.attr.distribution),
        _escape_filename_segment(version),
        _escape_filename_segment(ctx.attr.python_tag),
        _escape_filename_segment(ctx.attr.abi),
        _escape_filename_segment(ctx.attr.platform),
    ]) + ".whl")

    name_file = ctx.actions.declare_file(ctx.label.name + ".name")

    inputs_to_package = depset(
        direct = ctx.files.deps,
    )

    # Inputs to this rule which are not to be packaged.
    # Currently this is only the description file (if used).
    other_inputs = []

    # Wrap the inputs into a file to reduce command line length.
    packageinputfile = ctx.actions.declare_file(ctx.attr.name + "_target_wrapped_inputs.txt")
    content = ""
    for input_file in inputs_to_package.to_list():
        content += _input_file_to_arg(input_file) + "\n"
    ctx.actions.write(output = packageinputfile, content = content)
    other_inputs.append(packageinputfile)

    args = ctx.actions.args()
    args.add("--name", ctx.attr.distribution)
    args.add("--version", version)
    args.add("--python_tag", ctx.attr.python_tag)
    args.add("--abi", ctx.attr.abi)
    args.add("--platform", ctx.attr.platform)
    args.add("--out", outfile)
    args.add("--name_file", name_file)
    args.add_all(ctx.attr.strip_path_prefixes, format_each = "--strip_path_prefix=%s")

    # Pass workspace status files if stamping is enabled
    if is_stamping_enabled(ctx.attr):
        args.add("--volatile_status_file", ctx.version_file)
        args.add("--stable_status_file", ctx.info_file)
        other_inputs.extend([ctx.version_file, ctx.info_file])

    args.add("--input_file_list", packageinputfile)

    # Note: Description file and version are not embedded into metadata.txt yet,
    # it will be done later by wheelmaker script.
    metadata_file = ctx.actions.declare_file(ctx.attr.name + ".metadata.txt")
    metadata_contents = ["Metadata-Version: 2.1"]
    metadata_contents.append("Name: %s" % ctx.attr.distribution)

    if ctx.attr.author:
        metadata_contents.append("Author: %s" % ctx.attr.author)
    if ctx.attr.author_email:
        metadata_contents.append("Author-email: %s" % ctx.attr.author_email)
    if ctx.attr.homepage:
        metadata_contents.append("Home-page: %s" % ctx.attr.homepage)
    if ctx.attr.license:
        metadata_contents.append("License: %s" % ctx.attr.license)

    for c in ctx.attr.classifiers:
        metadata_contents.append("Classifier: %s" % c)

    if ctx.attr.python_requires:
        metadata_contents.append("Requires-Python: %s" % ctx.attr.python_requires)
    for requirement in ctx.attr.requires:
        metadata_contents.append("Requires-Dist: %s" % requirement)

    for option, option_requirements in sorted(ctx.attr.extra_requires.items()):
        metadata_contents.append("Provides-Extra: %s" % option)
        for requirement in option_requirements:
            metadata_contents.append(
                "Requires-Dist: %s; extra == '%s'" % (requirement, option),
            )
    ctx.actions.write(
        output = metadata_file,
        content = "\n".join(metadata_contents) + "\n",
    )
    other_inputs.append(metadata_file)
    args.add("--metadata_file", metadata_file)

    # Merge console_scripts into entry_points.
    entrypoints = dict(ctx.attr.entry_points)  # Copy so we can mutate it
    if ctx.attr.console_scripts:
        # Copy a console_scripts group that may already exist, so we can mutate it.
        console_scripts = list(entrypoints.get("console_scripts", []))
        entrypoints["console_scripts"] = console_scripts
        for name, ref in ctx.attr.console_scripts.items():
            console_scripts.append("{name} = {ref}".format(name = name, ref = ref))

    # If any entry_points are provided, construct the file here and add it to the files to be packaged.
    # see: https://packaging.python.org/specifications/entry-points/
    if entrypoints:
        lines = []
        for group, entries in sorted(entrypoints.items()):
            if lines:
                # Blank line between groups
                lines.append("")
            lines.append("[{group}]".format(group = group))
            lines += sorted(entries)
        entry_points_file = ctx.actions.declare_file(ctx.attr.name + "_entry_points.txt")
        content = "\n".join(lines)
        ctx.actions.write(output = entry_points_file, content = content)
        other_inputs.append(entry_points_file)
        args.add("--entry_points_file", entry_points_file)

    if ctx.attr.description_file:
        description_file = ctx.file.description_file
        args.add("--description_file", description_file)
        other_inputs.append(description_file)

    for target, filename in ctx.attr.extra_distinfo_files.items():
        target_files = target.files.to_list()
        if len(target_files) != 1:
            fail(
                "Multi-file target listed in extra_distinfo_files %s",
                filename,
            )
        other_inputs.extend(target_files)
        args.add(
            "--extra_distinfo_file",
            filename + ";" + target_files[0].path,
        )

    ctx.actions.run(
        inputs = depset(direct = other_inputs, transitive = [inputs_to_package]),
        outputs = [outfile, name_file],
        arguments = [args],
        executable = ctx.executable._wheelmaker,
        progress_message = "Building wheel {}".format(ctx.label),
    )
    return [
        DefaultInfo(
            files = depset([outfile]),
            runfiles = ctx.runfiles(files = [outfile]),
        ),
        PyWheelInfo(
            wheel = outfile,
            name_file = name_file,
        ),
    ]

def _concat_dicts(*dicts):
    result = {}
    for d in dicts:
        result.update(d)
    return result

_distribution_attrs = {
    "abi": attr.string(
        default = "none",
        doc = "Python ABI tag. 'none' for pure-Python wheels.",
    ),
    "distribution": attr.string(
        mandatory = True,
        doc = """\
Name of the distribution.

This should match the project name onm PyPI. It's also the name that is used to
refer to the package in other packages' dependencies.
""",
    ),
    "platform": attr.string(
        default = "any",
        doc = """\
Supported platform. Use 'any' for pure-Python wheel.

If you have included platform-specific data, such as a .pyd or .so
extension module, you will need to specify the platform in standard
pip format. If you support multiple platforms, you can define
platform constraints, then use a select() to specify the appropriate
specifier, eg:

`
platform = select({
    "//platforms:windows_x86_64": "win_amd64",
    "//platforms:macos_x86_64": "macosx_10_7_x86_64",
    "//platforms:linux_x86_64": "manylinux2014_x86_64",
})
`
""",
    ),
    "python_tag": attr.string(
        default = "py3",
        doc = "Supported Python version(s), eg `py3`, `cp35.cp36`, etc",
    ),
    "stamp": attr.int(
        doc = """\
Whether to encode build information into the wheel. Possible values:

- `stamp = 1`: Always stamp the build information into the wheel, even in \
[--nostamp](https://docs.bazel.build/versions/main/user-manual.html#flag--stamp) builds. \
This setting should be avoided, since it potentially kills remote caching for the target and \
any downstream actions that depend on it.

- `stamp = 0`: Always replace build information by constant values. This gives good build result caching.

- `stamp = -1`: Embedding of build information is controlled by the \
[--[no]stamp](https://docs.bazel.build/versions/main/user-manual.html#flag--stamp) flag.

Stamped targets are not rebuilt unless their dependencies change.
        """,
        default = -1,
        values = [1, 0, -1],
    ),
    "version": attr.string(
        mandatory = True,
        doc = (
            "Version number of the package. Note that this attribute " +
            "supports stamp format strings (eg. `1.2.3-{BUILD_TIMESTAMP}`) " +
            "as well as 'make variables' (e.g. `1.2.3-$(VERSION)`)."
        ),
    ),
    "_stamp_flag": attr.label(
        doc = "A setting used to determine whether or not the `--stamp` flag is enabled",
        default = Label("//python/private:stamp"),
    ),
}

_requirement_attrs = {
    "extra_requires": attr.string_list_dict(
        doc = "List of optional requirements for this package",
    ),
    "requires": attr.string_list(
        doc = ("List of requirements for this package. See the section on " +
               "[Declaring required dependency](https://setuptools.readthedocs.io/en/latest/userguide/dependency_management.html#declaring-dependencies) " +
               "for details and examples of the format of this argument."),
    ),
}

_entrypoint_attrs = {
    "console_scripts": attr.string_dict(
        doc = """\
Deprecated console_script entry points, e.g. `{'main': 'examples.wheel.main:main'}`.

Deprecated: prefer the `entry_points` attribute, which supports `console_scripts` as well as other entry points.
""",
    ),
    "entry_points": attr.string_list_dict(
        doc = """\
entry_points, e.g. `{'console_scripts': ['main = examples.wheel.main:main']}`.
""",
    ),
}

_other_attrs = {
    "author": attr.string(
        doc = "A string specifying the author of the package.",
        default = "",
    ),
    "author_email": attr.string(
        doc = "A string specifying the email address of the package author.",
        default = "",
    ),
    "classifiers": attr.string_list(
        doc = "A list of strings describing the categories for the package. For valid classifiers see https://pypi.org/classifiers",
    ),
    "description_file": attr.label(
        doc = "A file containing text describing the package.",
        allow_single_file = True,
    ),
    "extra_distinfo_files": attr.label_keyed_string_dict(
        doc = "Extra files to add to distinfo directory in the archive.",
        allow_files = True,
    ),
    "homepage": attr.string(
        doc = "A string specifying the URL for the package homepage.",
        default = "",
    ),
    "license": attr.string(
        doc = "A string specifying the license of the package.",
        default = "",
    ),
    "python_requires": attr.string(
        doc = (
            "Python versions required by this distribution, e.g. '>=3.5,<3.7'"
        ),
        default = "",
    ),
    "strip_path_prefixes": attr.string_list(
        default = [],
        doc = "path prefixes to strip from files added to the generated package",
    ),
}

py_wheel = rule(
    implementation = _py_wheel_impl,
    doc = """
A rule for building Python Wheels.

Wheels are Python distribution format defined in https://www.python.org/dev/peps/pep-0427/.

This rule packages a set of targets into a single wheel.

Currently only pure-python wheels are supported.

Examples:

```python
# Package some specific py_library targets, without their dependencies
py_wheel(
    name = "minimal_with_py_library",
    # Package data. We're building "example_minimal_library-0.0.1-py3-none-any.whl"
    distribution = "example_minimal_library",
    python_tag = "py3",
    version = "0.0.1",
    deps = [
        "//examples/wheel/lib:module_with_data",
        "//examples/wheel/lib:simple_module",
    ],
)

# Use py_package to collect all transitive dependencies of a target,
# selecting just the files within a specific python package.
py_package(
    name = "example_pkg",
    # Only include these Python packages.
    packages = ["examples.wheel"],
    deps = [":main"],
)

py_wheel(
    name = "minimal_with_py_package",
    # Package data. We're building "example_minimal_package-0.0.1-py3-none-any.whl"
    distribution = "example_minimal_package",
    python_tag = "py3",
    version = "0.0.1",
    deps = [":example_pkg"],
)
```
""",
    attrs = _concat_dicts(
        {
            "deps": attr.label_list(
                doc = """\
Targets to be included in the distribution.

The targets to package are usually `py_library` rules or filesets (for packaging data files).

Note it's usually better to package `py_library` targets and use
`entry_points` attribute to specify `console_scripts` than to package
`py_binary` rules. `py_binary` targets would wrap a executable script that
tries to locate `.runfiles` directory which is not packaged in the wheel.
""",
            ),
            "_wheelmaker": attr.label(
                executable = True,
                cfg = "exec",
                default = "//tools:wheelmaker",
            ),
        },
        _distribution_attrs,
        _requirement_attrs,
        _entrypoint_attrs,
        _other_attrs,
    ),
)