)]}'
{
  "commit": "839c324458f6900a58182d9aa23d846e8ec55c94",
  "tree": "4a5cec2712608fe7cd137447a2399bd8fd73a701",
  "parents": [
    "6e8e2caf7fc2dc5575f5e0c71e69c1b19b3f5699"
  ],
  "author": {
    "name": "hathach",
    "email": "thach@tinyusb.org",
    "time": "Fri Aug 28 16:40:07 2026 +0700"
  },
  "committer": {
    "name": "hathach",
    "email": "thach@tinyusb.org",
    "time": "Sat Aug 29 01:08:40 2026 +0700"
  },
  "message": "rp2350: PIO-USB runs the pico-sdk stock 150 MHz\n\nCloses the sys-clock question. rp2350: the dynamic 156 MHz switch is\nremoved - 150 MHz soak-tested clean (and a runtime switch truncates ETM\ncapture on the trace carrier). rp2040 keeps its existing 120 MHz: soak\nsweeps show 120 \u003d 8/8, stock 125 \u003d 0/3 (bulk-OUT collapses, device NAKs\n~600:1 with zero CRC errors on the wire), and 132 \u003d 2/10 flaky despite an\nexact 12n/375k divider - no divider criterion predicts rp2040 PIO-USB\nhealth (the RX state machine samples at raw sysclk), so only\nsoak-validated clocks ship.\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "32b5c2312737a9a1511e9545c8abb004ba161bc1",
      "old_mode": 33188,
      "old_path": "hw/bsp/rp2040/family.c",
      "new_id": "9de1658eb0c542425fbbb508f7e2e846fdf0a130",
      "new_mode": 33188,
      "new_path": "hw/bsp/rp2040/family.c"
    }
  ]
}