)]}'
{
  "commit": "d3eaeb06e04519b480637f6e7cb007a3de08d923",
  "tree": "97373bb1cea44d7107905b8af1bbf134ce11a735",
  "parents": [
    "c962a0bf62f53d7bee42db7ff3bcd8f07ec23daa"
  ],
  "author": {
    "name": "hathach",
    "email": "thach@tinyusb.org",
    "time": "Fri Jul 24 16:20:13 2026 +0700"
  },
  "committer": {
    "name": "hathach",
    "email": "thach@tinyusb.org",
    "time": "Fri Jul 24 16:20:13 2026 +0700"
  },
  "message": "imxrt: hold EVKB Ethernet PHY in reset while tracing, 50 MHz trace pin\n\nFresh bring-up pass on mimxrt1170_evkb: holding the 100M RTL8201 in reset\n(ENET_RST_B \u003d GPIO_LPSR_04) stops its RMII lines driving against the\nshared trace pads and doubles the clean trace-pin rate to 50 MHz\n(100 MHz CSTRACE root; 133 MHz root is marginal, stock 132 corrupts).\nValidated 3x 8 s TinyUSB captures at 11.46M fetches. D1-D3 remain silent\nin every configuration - the welded R1882-R1884 are electrically open;\nreflow is the remaining step to width 4. Board notes gain JP4 (must be\nshorted for an external probe on J58).\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "dd628ea805d4c112d317aa2949a243a7af666f8e",
      "old_mode": 33188,
      "old_path": ".claude/skills/etm-trace/boards.md",
      "new_id": "ea6c6181e15c0b6303327e9345cf7ccd70a081fa",
      "new_mode": 33188,
      "new_path": ".claude/skills/etm-trace/boards.md"
    },
    {
      "type": "modify",
      "old_id": "e3ef6233c5176cd3eefaead2e3cb356f62cba1ea",
      "old_mode": 33188,
      "old_path": "hw/bsp/imxrt/family.c",
      "new_id": "1b1a1f1d8cabf848256154d771ed050ec102d83d",
      "new_mode": 33188,
      "new_path": "hw/bsp/imxrt/family.c"
    }
  ]
}