CDC Dual Ports

Enumerates as a USB device with two independent CDC virtual serial ports.

What it does

• Exposes two CDC virtual COM ports.
• Echoes back any data received on either port to both ports: the first port echoes as lower case, the second as upper case.
• Sends a UART state notification (toggles the DSR line) on each press of the on-board button.
• Resets the board into the bootloader when the first port is opened at 1200 bps and then disconnected (touch-1200 trigger).
• Blinks the on-board LED: 250 ms when unmounted, 1000 ms when mounted.

USB Descriptors

Configuration

Notable tusb_config.h settings:

#define CFG_TUD_CDC               2   // two CDC ports
#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)

Building

CMake:

mkdir build && cd build
cmake -DBOARD=raspberry_pi_pico ..
cmake --build .

Make:

make BOARD=raspberry_pi_pico all

Try it

After flashing, two serial ports appear on the host (e.g. /dev/ttyACM0 and /dev/ttyACM1 on Linux). Open either one in a terminal and type: characters come back lower-cased on the first port and upper-cased on the second.