| # USBTMC | |
| A USB Test & Measurement Class (USBTMC) instrument with USB488/SCPI support, behaving like a simple programmable instrument. | |
| ## What it does | |
| - Implements a USBTMC interface with USB488 capabilities and advertises SCPI support. | |
| - Responds to `*IDN?` with an identification string (`TinyUSB,ModelNumber,SerialNumber,FirmwareVer123456`). | |
| - Buffers other written messages and echoes them back as the query response, after a configurable delay. | |
| - A `delay <ms>` command adjusts that simulated response delay (0–10000 ms). | |
| - Maintains an IEEE-488.2 status byte (MAV/SRQ), and handles trigger, clear, and bulk abort requests. | |
| - Supports the USBTMC indicator-pulse request, which briefly pulses the board LED. | |
| - Uses an interrupt endpoint in addition to the bulk IN/OUT endpoints. | |
| ## USB Descriptors | |
| | Interface | Class driver | | |
| |-----------|--------------| | |
| | 0 | USBTMC | | |
| ## Configuration | |
| Notable `tusb_config.h` settings: | |
| ```c | |
| #define CFG_TUD_USBTMC 1 | |
| #define CFG_TUD_USBTMC_ENABLE_INT_EP 1 | |
| #define CFG_TUD_USBTMC_ENABLE_488 1 | |
| ``` | |
| ## Building | |
| CMake: | |
| ```bash | |
| mkdir build && cd build | |
| cmake -DBOARD=raspberry_pi_pico .. | |
| cmake --build . | |
| ``` | |
| Make: | |
| ```bash | |
| make BOARD=raspberry_pi_pico all | |
| ``` | |
| ## Try it | |
| The device appears as a USBTMC test-and-measurement instrument. Talk to it with a VISA/SCPI tool (for example PyVISA). The included `visaQuery.py` opens the instrument and sends `*IDN?`: | |
| ```bash | |
| python visaQuery.py | |
| ``` |