| # Boards |
| |
| The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. It is responsible for getting the MCU started and the USB peripheral clocked with minimal of on-board devices |
| - One LED for status |
| - One Button to get input from user |
| - One UART optionally, mostly for host examples |
| |
| ## Supported Boards |
| |
| This code base already had supported for a handful of following boards |
| |
| ### MicroChip SAMD |
| |
| - [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333) |
| - [Adafruit Feather M0 Express](https://www.adafruit.com/product/3403) |
| - [Adafruit Metro M0 Express](https://www.adafruit.com/product/3505) |
| - [Adafruit Feather M4 Express](https://www.adafruit.com/product/3857) |
| - [Adafruit Metro M4 Express](https://www.adafruit.com/product/3382) |
| |
| ### Nordic nRF5x |
| |
| - [Adafruit Feather nRF52840 Express](https://www.adafruit.com/product/4062) |
| - [Adafruit Circuit Playground Bluefruit](https://www.adafruit.com/product/4333) |
| - [Nordic nRF52840 Development Kit (aka pca10056)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) |
| - [Nordic nRF52840 Dongle (aka pca10059)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle) |
| |
| ### NXP LPC |
| |
| - [LPCXpresso 11u37](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso-board-for-lpc11u37h:OM13074) |
| - [LPCXpresso 11u68](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc11u68:OM13058) |
| - [LPCXpresso 1347](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1347:OM13045) |
| - [ARM mbed LPC1768](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/arm-mbed-lpc1768-board:OM11043) |
| - [LPCXpresso 1769](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1769:OM13000) |
| - [Keil MCB1800 Evaluation Board](http://www.keil.com/mcb1800) |
| - [Embedded Artists LPC4088 Quick Start board](https://www.embeddedartists.com/products/lpc4088-quickstart-board) |
| - [NGX LPC4330-Xplorer](https://www.nxp.com/design/designs/lpc4330-xplorer-board:OM13027) |
| - [Embedded Artists LPC4357 Developer Kit](http://www.embeddedartists.com/products/kits/lpc4357_kit.php) |
| - [LPCXpresso 51U68](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005) |
| - [LPCXpresso 54114](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso54114-board:OM13089) |
| - [LPCXpresso 55s69 EVK](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpcxpresso55s69-development-board:LPC55S69-EVK) |
| |
| ### Sony |
| |
| - [Sony Spresense CXD5602](https://developer.sony.com/develop/spresense) |
| |
| ### ST STM32 |
| |
| - Adafruit Feather STM32F405 |
| - [Micro Python PyBoard v1.1](https://store.micropython.org/product/PYBv1.1) |
| - [STM32 L035c8 Discovery](https://www.st.com/en/evaluation-tools/32l0538discovery.html) |
| - [STM32 F070rb Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f070rb.html) |
| - [STM32 F072rb Discovery](https://www.st.com/en/evaluation-tools/32f072bdiscovery.html) |
| - STM32 F103c Blue Pill |
| - [STM32 F207zg Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f207zg.html) |
| - [STM32 F303vc Discovery](https://www.st.com/en/evaluation-tools/stm32f3discovery.html) |
| - [STM32 F407vg Discovery](https://www.st.com/en/evaluation-tools/stm32f4discovery.html) |
| - [STM32 F411ve Discovery](https://www.st.com/en/evaluation-tools/32f411ediscovery.html) |
| - [STM32 F412zg Discovery](https://www.st.com/en/evaluation-tools/32f412gdiscovery.html) |
| - [STM32 F767zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f767zi.html) |
| - [STM32 H743zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-h743zi.html) |
| |
| ## Add your own board |
| |
| If you don't possess any of supported board above. Don't worry you can easily implemented your own one by following this guide as long as the mcu is supported. |
| |
| - Create new makefile for your board at `hw/bsp/<board name>/board.mk` and linker file as well if needed. |
| - Create new source file for your board at `hw/bsp/<board name>/<board name>.c` and implement following APIs |
| |
| ### Board APIs |
| |
| #### board_init() |
| |
| Is responsible for starting the MCU, setting up the USB clock and USB pins. It is also responsible for initializing LED and button pins. |
| One useful clock debugging technique is to set up a PWM output at a known value such as 500hz based on the USB clock so that you can verify it is correct with a logic probe or oscilloscope. |
| Setup your USB in a crystal-less mode when available. That makes the code easier to port across boards. |
| |
| #### board_led_write() |
| |
| Set the pin corresponding to the led to output a value that lights the LED when `state` is true. |
| |
| #### board_button_read() |
| |
| Return current state of button, a `1` means active (pressed), a `0` means inactive. |
| |
| #### board_millis() |
| |
| The function returns the elapsed number of milliseconds since startup. On ARM this is commonly done with SysTick or Timer. This provide examples a way to measure time to blink LED or delay properly. It is only required when run examples without RTOS `CFG_TUSB_OS == OPT_OS_NONE`. |
| |
| #### board_uart_read() |
| |
| Get characters from UART peripheral. |
| |
| #### board_uart_write() |
| |
| Send characters to UART peripheral. |
