| # 0.18.0 |
| |
| *December 25, 2024* |
| |
| ## General |
| |
| - New MCUs: |
| - Add esp32p4 OTG highspeed support |
| - Add stm32 u0, c0, h7rs |
| - Better support dcache, make sure all usb-transferred buffer are cache line aligned and occupy full cache line |
| - Build ARM IAR with CircleCI |
| - Improve HIL with `dual/host_info_to_device_cdc` optional for pico/pico2, enable dwc2 dma test |
| |
| ## API Changes |
| |
| - Change signature of `tusb_init(rhport, tusb_rhport_init_t*)`, `tusb_init(void)` is now deprecated but still available for backward compatibility |
| - Add new `tusb_int_handler(rhport, in_isr)` |
| - Add time-related APIs: `tusb_time_millis_api()` and `tusb_time_delay_ms_api()` for non-RTOS, required for some ports/configuration |
| |
| ### New configuration macros |
| |
| - `CFG_TUD/TUH_MEM_DCACHE_ENABLE` enable data cache sync for endpoint buffer |
| - `CFG_TUD/TUH_MEM_DCACHE_LINE_SIZE` set cache line size |
| - `CFG_TUD/TUH_DWC2_SLAVE_ENABLE` enable dwc2 slave mode |
| - `CFG_TUD/TUH_DWC2_DMA_ENABLE` enable dwc2 dma mode |
| |
| ## Controller Driver (DCD & HCD) |
| |
| ### DWC2 |
| |
| - Add DMA support for both device and host controller |
| - Add host driver support including: full/high speed, control/bulk/interrupt (CBI) transfer, split CBI i.e FS/LS attached via highspeed hub, hub support |
| |
| ### RP2 |
| |
| - implement `dcd_edpt_iso_alloc()` and `dcd_edpt_iso_activate()` for isochronous endpoint |
| |
| ### iMXRT1170 |
| |
| - support M4 core |
| |
| ## Device Stack |
| |
| - Vendor Fix class reset |
| - NCM fix recursions in `tud_network_recv_renew()` |
| - Audio fix align issue of `_audiod_fct.alt_setting` |
| - UVC support format frame based |
| - Change `dcd_dcache_()` return type from void to bool |
| - HID add Usage Table for Physical Input Device Page (0x0F) |
| |
| ## Host Stack |
| |
| - Fix an duplicated attach issue which cause USBH Defer Attach until current enumeration complete message |
| |
| ## Contributors |
| |
| Thanks to everyone who contributed to this release: @bollenn, @chintal, @DavidEGrayson, @GuavTek, @hathach, @HiFiPhile, @lijunru-hub, @Maerdl, @pschatzmann, @rgrr, @roma-jam, @shdeb, @shuffle2, @subsonicpulse, @tannewt, @UweBonnes, @YixingShen. |
