# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# !!!!!!!!!! TEST INFORMATION !!!!!!!!!!!!!!!!!!
# This test file tests Group Multicast Messaging.
# For this test to work, A Group Write/Command and a unicast read need to occur to be able to confirm that the group Communication works. Every test comes in a pair
# Only Works on Linux machines
name: Basic Group Messaging Tests

config:
    nodeId: 0x12344321
    cluster: "Basic"
    endpoint: 0
    nodeId2:
        type: node_id
        defaultValue: 0x43211234
    discriminator:
        type: int16u
        defaultValue: 3840
    payload:
        type: char_string
        defaultValue: "MT:-24J0AFN00KA0648G00" # This value needs to be generated automatically

tests:
    - label: "Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "KeySet Write 1"
      cluster: "Group Key Management"
      command: "KeySetWrite"
      arguments:
          values:
              - name: "GroupKeySet"
                value: {
                        GroupKeySetID: 0x01a1,
                        #  TODO Revert this once MCSP is implemented
                        # GroupKeySecurityPolicy: 1,
                        GroupKeySecurityPolicy: 0, # 0 => TrustFirst
                        EpochKey0: "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf",
                        EpochStartTime0: 1110000,
                        EpochKey1: "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf",
                        EpochStartTime1: 1110001,
                        EpochKey2: "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf",
                        EpochStartTime2: 1110002,
                    }

    - label: "KeySet Write 2"
      cluster: "Group Key Management"
      command: "KeySetWrite"
      arguments:
          values:
              - name: "GroupKeySet"
                value: {
                        GroupKeySetID: 0x01a2,
                        GroupKeySecurityPolicy: 0, # TrustFirst
                        EpochKey0: "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf",
                        EpochStartTime0: 2220000,
                        EpochKey1: "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef",
                        EpochStartTime1: 2220001,
                        EpochKey2: "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
                        EpochStartTime2: 2220002,
                    }

    - label: "Write Group Keys"
      cluster: "Group Key Management"
      command: "writeAttribute"
      attribute: "GroupKeyMap"
      arguments:
          value:
              [
                  { FabricIndex: 0, GroupId: 0x0101, GroupKeySetID: 0x01a1 },
                  { FabricIndex: 0, GroupId: 0x0102, GroupKeySetID: 0x01a2 },
              ]

    - label: "Add Group 1 (endpoint 1)"
      cluster: "Groups"
      command: "AddGroup"
      endpoint: 1
      arguments:
          values:
              - name: "groupId"
                value: 0x0101
              - name: "groupName"
                value: "Group #1"
      response:
          values:
              - name: "status"
                value: 0
              - name: "groupId"
                value: 0x0101

    - label: "Add Group 2 (endpoint 0)"
      cluster: "Groups"
      command: "AddGroup"
      endpoint: 0
      arguments:
          values:
              - name: "groupId"
                value: 0x0102
              - name: "groupName"
                value: "Group #2"
      response:
          values:
              - name: "status"
                value: 0
              - name: "groupId"
                value: 0x0102

    - label: "Install ACLs"
      cluster: "Access Control"
      command: "writeAttribute"
      attribute: "ACL"
      arguments:
          value: [
                  # Any CASE can administer
                  {
                      FabricIndex: 0,
                      Privilege: 5, # administer
                      AuthMode: 2, # case
                      Subjects: null,
                      Targets: null,
                  },
                  # Any group can manage
                  {
                      FabricIndex: 0,
                      Privilege: 4, # manage
                      AuthMode: 3, # group
                      Subjects: null,
                      Targets: null,
                  },
              ]

    # Test Pair 1 : Check initial value (ensure it's not the test value)
    - label: "Read initial Attribute value"
      command: "readAttribute"
      attribute: "nodeLabel"
      response:
          value: ""

    # Test Pair 2 : Sends a Group Write Attribute
    - label: "Group Write Attribute"
      command: "writeAttribute"
      attribute: "nodeLabel"
      groupId: 0x0102
      arguments:
          value: "xyzzy"

    # Give the group write time to actually happen; unicast delivery can outrace
    # multicast if the unicast packet is sent immediately after the multicast one.
    - label: "Wait for write 1"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 1000

      # Test Pair 2 : Validates previous group write attribute with a unicast to read
    - label: "Read back Attribute"
      command: "readAttribute"
      attribute: "nodeLabel"
      response:
          value: "xyzzy"

    # Test Pair 3 : Sends a Group Write Attribute
    - label: "Restore initial Attribute value"
      command: "writeAttribute"
      attribute: "nodeLabel"
      groupId: 0x0102
      arguments:
          value: ""

    # Give the group write time to actually happen; unicast delivery can outrace
    # multicast if the unicast packet is sent immediately after the multicast one.
    - label: "Wait for write 2"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    # Test Pair 3 : Validates previous group write attribute with a unicast to read
    - label: "Read back Attribute"
      command: "readAttribute"
      attribute: "nodeLabel"
      response:
          value: ""

    # Test Pair 4 : Sends a Group command
    - label: "Check on/off attribute value is false for endpoint 1"
      cluster: "On/Off"
      command: "readAttribute"
      attribute: "OnOff"
      endpoint: 1
      response:
          value: 0

    - label: "Turn On the light to see attribute change"
      cluster: "On/Off"
      command: "On"
      groupId: 0x0101

    # Give the group invoke time to actually happen; unicast delivery can outrace
    # multicast if the unicast packet is sent immediately after the multicast one.
    - label: "Wait for command 3"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    # Test Pair 4 : Validates previous group command with a unicast to read
    - label:
          "Check on/off attribute value is true after on command for endpoint 1"
      cluster: "On/Off"
      command: "readAttribute"
      attribute: "OnOff"
      endpoint: 1
      response:
          value: 1

    - label: "Turn off the light to get ready for the next test"
      cluster: "On/Off"
      command: "Off"
      endpoint: 1

    - label: "Cleanup ACLs"
      cluster: "Access Control"
      command: "writeAttribute"
      attribute: "ACL"
      arguments:
          value: [
                  # Any CASE can administer
                  {
                      FabricIndex: 0,
                      Privilege: 5, # administer
                      AuthMode: 2, # case
                      Subjects: null,
                      Targets: null,
                  },
              ]

    - label: "Open Commissioning Window from alpha"
      cluster: "AdministratorCommissioning"
      command: "OpenBasicCommissioningWindow"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "CommissioningTimeout"
                value: 180

    # We want to repeat all that from the "gamma" fabric, where our fabric
    # index is 3 but the device's will be 2, so we have different fabric
    # indices for the same fabric id.
    - label: "Commission from gamma"
      identity: "gamma"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: payload

    - label: "Wait for the commissioned device to be retrieved for gamma"
      identity: "gamma"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2

    - label: "KeySet Write 1 for gamma"
      identity: "gamma"
      cluster: "Group Key Management"
      command: "KeySetWrite"
      arguments:
          values:
              - name: "GroupKeySet"
                value: {
                        GroupKeySetID: 0x01a1,
                        #  TODO Revert this once MCSP is implemented
                        # GroupKeySecurityPolicy: 1,
                        GroupKeySecurityPolicy: 0, # 0 => TrustFirst
                        EpochKey0: "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf",
                        EpochStartTime0: 1110000,
                        EpochKey1: "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf",
                        EpochStartTime1: 1110001,
                        EpochKey2: "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf",
                        EpochStartTime2: 1110002,
                    }

    - label: "KeySet Write 2 for gamma"
      identity: "gamma"
      cluster: "Group Key Management"
      command: "KeySetWrite"
      arguments:
          values:
              - name: "GroupKeySet"
                value: {
                        GroupKeySetID: 0x01a2,
                        GroupKeySecurityPolicy: 0, # TrustFirst
                        EpochKey0: "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf",
                        EpochStartTime0: 2220000,
                        EpochKey1: "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef",
                        EpochStartTime1: 2220001,
                        EpochKey2: "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
                        EpochStartTime2: 2220002,
                    }

    - label: "Write Group Keys for gamma"
      identity: "gamma"
      cluster: "Group Key Management"
      command: "writeAttribute"
      attribute: "GroupKeyMap"
      arguments:
          value:
              [
                  { FabricIndex: 0, GroupId: 0x0101, GroupKeySetID: 0x01a1 },
                  { FabricIndex: 0, GroupId: 0x0102, GroupKeySetID: 0x01a2 },
              ]

    - label: "Add Group 1 (endpoint 1) for gamma"
      identity: "gamma"
      cluster: "Groups"
      command: "AddGroup"
      endpoint: 1
      arguments:
          values:
              - name: "groupId"
                value: 0x0101
              - name: "groupName"
                value: "Group #1"
      response:
          values:
              - name: "status"
                value: 0
              - name: "groupId"
                value: 0x0101

    - label: "Add Group 2 (endpoint 0) for gamma"
      identity: "gamma"
      cluster: "Groups"
      command: "AddGroup"
      endpoint: 0
      arguments:
          values:
              - name: "groupId"
                value: 0x0102
              - name: "groupName"
                value: "Group #2"
      response:
          values:
              - name: "status"
                value: 0
              - name: "groupId"
                value: 0x0102

    - label: "Install ACLs for gamma"
      identity: "gamma"
      cluster: "Access Control"
      command: "writeAttribute"
      attribute: "ACL"
      arguments:
          value: [
                  # Any CASE can administer
                  {
                      FabricIndex: 0,
                      Privilege: 5, # administer
                      AuthMode: 2, # case
                      Subjects: null,
                      Targets: null,
                  },
                  # Any group can manage
                  {
                      FabricIndex: 0,
                      Privilege: 4, # manage
                      AuthMode: 3, # group
                      Subjects: null,
                      Targets: null,
                  },
              ]

    # Test Pair 1 : Check initial value (ensure it's not the test value)
    - label: "Read initial Attribute value for gamma"
      identity: "gamma"
      command: "readAttribute"
      attribute: "nodeLabel"
      response:
          value: ""

    # Test Pair 2 : Sends a Group Write Attribute
    - label: "Group Write Attribute for gamma"
      identity: "gamma"
      command: "writeAttribute"
      attribute: "nodeLabel"
      groupId: 0x0102
      arguments:
          value: "xyzzy"

    # Give the group write time to actually happen; unicast delivery can outrace
    # multicast if the unicast packet is sent immediately after the multicast one.
    - label: "Wait for write 1 for gamma"
      identity: "gamma"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

      # Test Pair 2 : Validates previous group write attribute with a unicast to read
    - label: "Read back Attribute for gamma"
      identity: "gamma"
      command: "readAttribute"
      attribute: "nodeLabel"
      response:
          value: "xyzzy"

    # Test Pair 3 : Sends a Group Write Attribute
    - label: "Restore initial Attribute value for gamma"
      identity: "gamma"
      command: "writeAttribute"
      attribute: "nodeLabel"
      groupId: 0x0102
      arguments:
          value: ""

    # Give the group write time to actually happen; unicast delivery can outrace
    # multicast if the unicast packet is sent immediately after the multicast one.
    - label: "Wait for write 2 for gamma"
      identity: "gamma"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    # Test Pair 3 : Validates previous group write attribute with a unicast to read
    - label: "Read back Attribute for gamma"
      identity: "gamma"
      command: "readAttribute"
      attribute: "nodeLabel"
      response:
          value: ""

    # Test Pair 4 : Sends a Group command
    - label: "Check on/off attribute value is false for endpoint 1 for gamma"
      cluster: "On/Off"
      command: "readAttribute"
      attribute: "OnOff"
      endpoint: 1
      response:
          value: 0

    - label: "Turn On the light to see attribute change for gamma"
      identity: "gamma"
      cluster: "On/Off"
      command: "On"
      groupId: 0x0101

    # Give the group invoke time to actually happen; unicast delivery can outrace
    # multicast if the unicast packet is sent immediately after the multicast one.
    - label: "Wait for command 3 for gamma"
      identity: "gamma"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    # Test Pair 4 : Validates previous group command with a unicast to read
    - label:
          "Check on/off attribute value is true after on command for endpoint 1
          for gamma"
      cluster: "On/Off"
      command: "readAttribute"
      attribute: "OnOff"
      endpoint: 1
      response:
          value: 1

    - label: "Cleanup ACLs for gamma"
      identity: "gamma"
      cluster: "Access Control"
      command: "writeAttribute"
      attribute: "ACL"
      arguments:
          value: [
                  # Any CASE can administer
                  {
                      FabricIndex: 0,
                      Privilege: 5, # administer
                      AuthMode: 2, # case
                      Subjects: null,
                      Targets: null,
                  },
              ]