| # |
| # Copyright (c) 2020 Project CHIP Authors |
| # Copyright (c) 2014-2017 Nest Labs, Inc. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # Description: |
| # This file implements a glue makefile for building the CHIP SDK |
| # for standalone desktop or server build host systems. |
| # |
| # This is strictly a convenience makefile. Such systems can |
| # otherwise be built using the usual GNU autotools convention of: |
| # |
| # % ./configure |
| # % make |
| # |
| |
| # Don't allow this top-level makefile's targets to be built in parallel. |
| |
| .NOTPARALLEL: |
| |
| COVERAGE ?= 0 |
| DEBUG ?= 0 |
| TIMESTAMP ?= 0 |
| TUNNEL_FAILOVER ?= 0 |
| USE_LWIP ?= 0 |
| USE_NW ?= 0 |
| NO_OPENSSL ?= 0 |
| BLUEZ ?= 0 |
| USE_FUZZING ?= 0 |
| TESTS ?= 1 |
| |
| HOSTOS = $(shell uname -s |tr [:upper:] [:lower:]) |
| ARCH = $(shell uname -m |tr [:upper:] [:lower:]) |
| |
| ECHO := @echo |
| MAKE := make |
| MKDIR_P := mkdir -p |
| LN_S := ln -s |
| RM_F := rm -f |
| |
| INSTALL := /usr/bin/install |
| INSTALLFLAGS := -p |
| |
| TopSourceDir := $(dir $(shell readlink $(firstword $(MAKEFILE_LIST)))) |
| AbsTopSourceDir := $(dir $(realpath $(firstword $(MAKEFILE_LIST)))) |
| |
| BuildPath = build |
| TopBuildDir = $(BuildPath) |
| AbsTopBuildDir = $(CURDIR)/$(TopBuildDir) |
| |
| ResultPath = output |
| TopResultDir = $(ResultPath) |
| AbsTopResultDir = $(CURDIR)/$(TopResultDir) |
| |
| TargetTuple = $(shell ${AbsTopSourceDir}/third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess | sed -e 's/[[:digit:].]*$$//g') |
| |
| ProjectConfigDir ?= $(AbsTopSourceDir)/config/standalone |
| |
| ifeq ($(ARCH),x86_64) |
| configure_OPTIONS = CPPFLAGS="-maes" |
| endif |
| |
| # NOTE: Mac OS SDKs generated on OS X Sierra (or higher) seem to have trouble |
| # running on El Capitan (or earlier) due to issues with clock_gettime: |
| # declaring the interface in time.h but not making the symbol |
| # available in libSystem.dylib, resulting in a runtime crash. For |
| # now, suppress use of clock_getttime on OS X by overriding |
| # configure and asserting: |
| # |
| # ac_cv_func_clock_gettime=no |
| # ac_cv_have_decl_clock_gettime=no |
| # |
| # below. |
| # |
| |
| ifeq ($(HOSTOS),darwin) |
| configure_OPTIONS += ac_cv_func_clock_gettime=no ac_cv_have_decl_clock_gettime=no |
| endif |
| |
| # If the user has asserted USE_FUZZING enable fuzzing build |
| ifeq ($(USE_FUZZING),1) |
| configure_OPTIONS += --enable-fuzzing |
| endif |
| |
| # If the user has asserted COVERAGE, alter the configuration options |
| # accordingly. |
| |
| ifeq ($(COVERAGE),1) |
| # no point in enabling docs generation for a coverage build |
| configure_OPTIONS += --enable-coverage --enable-coverage-reports --disable-docs |
| # Happy checks are time consuming, but on average less processor intensive than |
| # compiling and running unit-tests. |
| # Bump the number of builds, it primarily has an effect on the make check |
| # phase of the build. |
| BuildJobs ?= $(shell echo $$(( `getconf _NPROCESSORS_ONLN` * 2 )) ) |
| endif |
| |
| # On properly configured 64-bit Linux machines, recognize the |
| # I686TARGET flag and build the 32-bit image. |
| |
| ifeq ($(HOSTOS),linux) |
| ifeq ($(ARCH),x86_64) |
| ifeq ($(I686TARGET),1) |
| TargetTuple = i686-pc-linux-gnu |
| configure_OPTIONS += --build=$(TargetTuple) CFLAGS="-m32 -g -O2" CXXFLAGS="-m32 -g -O2" LDFLAGS="-m32 -L/usr/lib/i386-linux-gnu/" |
| endif |
| endif |
| endif |
| |
| # If the user has asserted DEBUG, alter the configuration options |
| # accordingly. |
| |
| ifeq ($(DEBUG),1) |
| configure_OPTIONS += --enable-debug --enable-optimization=no |
| else |
| configure_OPTIONS += |
| endif |
| |
| # Disable docs generation |
| ifeq ($(DOCS),0) |
| configure_OPTIONS += --disable-docs |
| else |
| configure_OPTIONS += |
| endif |
| |
| # If the user has asserted TIMESTAMP, alter the configuration options |
| # accordingly. |
| ifeq ($(TIMESTAMP),1) |
| configure_OPTIONS += --enable-stdio-logging-timestamps |
| else |
| configure_OPTIONS += |
| endif |
| |
| # If the user has used tunnel failover, alter the configuration options |
| # accordingly. |
| ifeq ($(TUNNEL_FAILOVER),1) |
| configure_OPTIONS += --enable-tunnel-failover |
| else |
| configure_OPTIONS += |
| endif |
| |
| # If the user has chipoble over bluez peripheral, alter the configuration options |
| # accordingly. |
| ifeq ($(BLUEZ),1) |
| configure_OPTIONS += --enable-experimental --enable-deprecated --enable-testing --enable-tools --disable-systemd --enable-debug |
| else |
| configure_OPTIONS += --with-bluez=no |
| endif |
| |
| # Disable tests generation |
| ifeq ($(TESTS),0) |
| configure_OPTIONS += --disable-tests |
| else |
| configure_OPTIONS += |
| endif |
| |
| # Allow openssl installation selection |
| ifneq ($(OPENSSL),) |
| configure_OPTIONS += --with-openssl=$(OPENSSL) |
| endif |
| |
| # If the user has asserted USE_LWIP, alter the configuration and |
| # target tuple to use LwIP rather than the expected BSD sockets. |
| |
| ifeq ($(USE_LWIP),1) |
| configure_OPTIONS += --with-target-network=lwip --with-lwip=internal --disable-java |
| TargetTuple := $(TargetTuple)-lwip |
| endif |
| |
| ifeq ($(USE_NW),1) |
| configure_OPTIONS += --with-target-network=Network.framework |
| TargetTuple := $(TargetTuple)-nw |
| endif |
| |
| ifeq ($(LONG_TESTS),1) |
| configure_OPTIONS += --enable-long-tests=yes |
| endif |
| |
| ifeq ($(ENABLE_CHIPOBLE_TEST),1) |
| configure_OPTIONS += --enable-chipoble-test=yes |
| endif |
| |
| ifndef BuildJobs |
| BuildJobs := $(shell getconf _NPROCESSORS_ONLN) |
| endif |
| JOBSFLAG := -j$(BuildJobs) |
| |
| # |
| # automake files |
| # |
| AMFILES = \ |
| src/system/Makefile.am \ |
| src/lib/Makefile.am \ |
| src/inet/Makefile.am \ |
| src/ble/Makefile.am \ |
| src/lwip/Makefile.am \ |
| src/Makefile.am \ |
| third_party/Makefile.am \ |
| Makefile.am \ |
| configure.ac \ |
| $(NULL) |
| |
| # |
| # configure-arch <target> |
| # |
| # Configure the CHIP SDK for the specified target. |
| # |
| # target - The target to configure. |
| # |
| define configure-target |
| $(ECHO) " CONFIG $(1)..." |
| (cd $(BuildPath)/$(1) && $(AbsTopSourceDir)/configure -C \ |
| INSTALL="$(INSTALL) $(INSTALLFLAGS)" \ |
| --prefix=/ \ |
| --exec-prefix=/$(1) \ |
| --with-chip-project-includes=$(ProjectConfigDir) \ |
| $(configure_OPTIONS)) |
| endef # configure-target |
| |
| # |
| # build-target <target> |
| # |
| # Build the CHIP SDK intermediate build products for the specified |
| # target. |
| # |
| # target - The target to build. |
| # |
| define build-target |
| $(ECHO) " BUILD $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| all |
| endef # build-target |
| |
| # |
| # check-target <target> |
| # |
| # Check (run unit tests) the CHIP SDK for the specified target. |
| # |
| # target - The target to check. |
| # |
| define check-target |
| $(ECHO) " CHECK $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| check |
| endef # check-target |
| |
| # |
| # distcheck-target <target> |
| # |
| # Check (run unit tests) OpenThread for the specified target. |
| # |
| # target - The target to distcheck. |
| # |
| define distcheck-target |
| $(ECHO) " DISTCHECK $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| distcheck |
| endef # distcheck-target |
| |
| # |
| # coverage-target <target> |
| # |
| # Generate code coverage from unit tests for the CHIP SDK for the |
| # specified target. |
| # |
| # target - The target to generate code coverage for. |
| # |
| define coverage-target |
| $(ECHO) " COVERAGE $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| coverage |
| endef # coverage-target |
| |
| # |
| # stage-target <target> |
| # |
| # Stage (install) the CHIP SDK final build products for the specified |
| # target. |
| # |
| # target - The target to stage. |
| # |
| define stage-target |
| $(ECHO) " STAGE $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| DESTDIR=$(AbsTopResultDir) \ |
| install |
| endef # stage-target |
| |
| # |
| # pretty-target <target> |
| # |
| # Prettyify the CHIP SDK source code for the specified target. |
| # |
| # target - The target to prettify. |
| # |
| define pretty-target |
| $(ECHO) " PRETTY $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| pretty |
| endef # pretty-target |
| |
| # |
| # pretty-check-target <target> |
| # |
| # Pretty-check (lint) the CHIP SDK source code for the specified |
| # target. |
| # |
| # target - The target to pretty-check (lint). |
| # |
| define pretty-check-target |
| $(ECHO) " PRETTY $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| pretty-check |
| endef # pretty-check-target |
| |
| # |
| # TARGET_template <target> |
| # |
| # Define macros, targets and rules to configure, build, and stage the |
| # CHIP SDK for a single target. |
| # |
| # target - The target to instantiate the template for. |
| # |
| define TARGET_template |
| CONFIGURE_TARGETS += configure-$(1) |
| BUILD_TARGETS += do-build-$(1) |
| CHECK_TARGETS += check-$(1) |
| DISTCHECK_TARGETS += distcheck-$(1) |
| COVERAGE_TARGETS += coverage-$(1) |
| STAGE_TARGETS += stage-$(1) |
| PRETTY_TARGETS += pretty-$(1) |
| PRETTY_CHECK_TARGETS += pretty-check-$(1) |
| BUILD_DIRS += $(BuildPath)/$(1) |
| DIRECTORIES += $(BuildPath)/$(1) |
| |
| configure-$(1): Makefile.in $(BuildPath)/$(1)/config.status |
| |
| $(BuildPath)/$(1)/config.status: | $(BuildPath)/$(1) |
| $$(call configure-target,$(1)) |
| |
| do-build-$(1): configure-$(1) |
| |
| do-build-$(1): |
| $$(call build-target,$(1)) |
| |
| check-$(1): do-build-$(1) |
| |
| check-$(1): |
| $$(call check-target,$(1)) |
| |
| distcheck-$(1): do-build-$(1) |
| |
| distcheck-$(1): |
| $$(call distcheck-target,$(1)) |
| |
| coverage-$(1): do-build-$(1) |
| |
| coverage-$(1): |
| $$(call coverage-target,$(1)) |
| |
| stage-$(1): do-build-$(1) |
| |
| stage-$(1): | $(TopResultDir) |
| $$(call stage-target,$(1)) |
| |
| pretty-$(1): configure-$(1) |
| $$(call pretty-target,$(1)) |
| |
| lint-$(1) pretty-check-$(1): configure-$(1) |
| $$(call pretty-check-target,$(1)) |
| |
| $(1): stage-$(1) |
| endef # TARGET_template |
| |
| .PHONY : configure build check coverage stage pretty lint pretty-check clean ensure-sudo help |
| |
| ensure-sudo: |
| $(ECHO) "Selected target will require sudo access." |
| @sudo echo "Sudo access granted" |
| |
| .DEFAULT_GOAL := all |
| |
| all: stage |
| |
| # Instantiate an target-specific build template for the target. |
| |
| $(eval $(call TARGET_template,$(TargetTuple))) |
| |
| # |
| # Common / Finalization |
| # |
| |
| Makefile.in: $(AMFILES) |
| $(ECHO) "BOOTSTRAP" |
| @./bootstrap |
| |
| configure: $(CONFIGURE_TARGETS) |
| |
| build: $(BUILD_TARGETS) |
| |
| check: ensure-sudo $(CHECK_TARGETS) |
| |
| distcheck: ensure-sudo $(DISTCHECK_TARGETS) |
| |
| coverage: ensure-sudo $(COVERAGE_TARGETS) |
| |
| stage: $(STAGE_TARGETS) |
| |
| pretty: $(PRETTY_TARGETS) |
| |
| lint pretty-check: $(PRETTY_CHECK_TARGETS) |
| |
| DIRECTORIES = $(TopResultDir) $(TopResultDir)/$(TargetTuple)/lib $(BUILD_DIRS) |
| |
| CLEAN_DIRS = $(TopResultDir) $(BUILD_DIRS) |
| |
| all: stage |
| |
| $(DIRECTORIES): |
| $(ECHO) " MKDIR $@" |
| @$(MKDIR_P) "$@" |
| |
| clean: |
| $(ECHO) " CLEAN" |
| @$(RM_F) -r $(CLEAN_DIRS) |
| |
| help: |
| @echo "$${HelpText}" |
| |
| export HelpText |
| define HelpText |
| Simply type 'make -f $(firstword $(MAKEFILE_LIST))' to build CHIP for the following |
| target: |
| |
| $(TargetTuple) |
| |
| You may want or need to override the following make variables either on the |
| command line or in the environment: |
| |
| DEBUG=[1|0] Enable/disable CHIP debug code and logging (default: '$(DEBUG)'). |
| |
| COVERAGE=[1|0] Enable/disable generation of code coverage information |
| (default: '$(COVERAGE)'). |
| |
| TIMESTAMP=[1|0] Enable/disable logging module timestamp output (default: '$(TIMESTAMP)'). |
| |
| USE_LWIP=[1|0] Build the standalone configuration against the LwIP |
| library rather than against sockets (default '$(USE_LWIP)'). |
| |
| BLUEZ=[1|0] Enable support for BLE peripheral using BlueZ bindings |
| |
| OPENSSL=<dir> Use the prebuilt version of OpenSSL located in the given |
| directory. Note that the directory is expected to contain |
| include and lib subdirectories containing the necessary header |
| and libraries. |
| |
| TUNNEL_FAILOVER=[1|0] Enable/disabled support for redundant VPN to the CHIP service |
| (default: '$(TUNNEL_FAILOVER)'). |
| |
| I686TARGET=[1|0] Enable/disable building a 32-bit target. Requires a properly |
| configured 64-bit Linux with multilib support (default: '$(I686TARGET)'). |
| |
| DOCS=[1|0] Enable/disable Doxygen-generated documentation (default: '$(DOCS)'). |
| Note this flag only has an effect when Doxygen is |
| installed. |
| |
| HAPPY=[1|0] When set to 0, skip the functional tests that require |
| Happy orchestration tool. When set to 1, pick the |
| default location to the Happy tool. When set to any |
| other value, the value is treated as the location of |
| the Happy tool. |
| |
| TESTS=[1|0] Enable/disable tests (default: '$(TESTS)'). |
| |
| endef |
