| # |
| # Copyright (c) 2020 Project CHIP Authors |
| # Copyright (c) 2014-2018 Nest Labs, Inc. |
| # Copyright (c) 2018 Google LLC |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # Description: |
| # This file is the GNU automake template for the CHIP SDK. |
| # |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/pre.am |
| |
| # To ensure that the .local-version file and subsequent rechecks work |
| # correctly, don't allow this top-level makefile to run in parallel. |
| |
| .NOTPARALLEL: |
| |
| AM_MAKEFLAGS = --no-print-directory |
| |
| SUBDIRS = \ |
| examples \ |
| third_party \ |
| src \ |
| docs \ |
| $(NULL) |
| |
| PRETTY_SUBDIRS = \ |
| $(filter-out third_party,$(SUBDIRS)) \ |
| $(NULL) |
| |
| EXTRA_DIST = \ |
| CODE_OF_CONDUCT.md \ |
| CONTRIBUTING.md \ |
| Makefile-Android \ |
| Makefile-bootstrap \ |
| Makefile-Standalone \ |
| README.md \ |
| .default-version \ |
| bootstrap \ |
| bootstrap-configure \ |
| repos.conf \ |
| .gitmodules \ |
| $(srcdir)/build/autoconf \ |
| $(srcdir)/config \ |
| $(srcdir)/config/efr32 \ |
| $(srcdir)/config/nrf5 \ |
| $(srcdir)/scripts \ |
| $(NULL) |
| |
| BUILT_SOURCES = \ |
| .local-version \ |
| $(NULL) |
| |
| dist_doc_DATA = \ |
| LICENSE \ |
| $(NULL) |
| |
| DISTCLEANFILES = \ |
| .local-version \ |
| .local-version.min \ |
| $(NULL) |
| |
| # There are no source files to lint or prettify in this subdirectory. |
| |
| PRETTY_FILES := $(NULL) |
| |
| # |
| # Package version files: |
| # |
| # .default-version - The default package version. This file is ALWAYS checked |
| # in and should always represent the current baseline |
| # version of the package. |
| # |
| # .dist-version - The distributed package version. This file is NEVER |
| # checked in within the upstream repository, is auto- |
| # generated, and is only found in the package distribution. |
| # |
| # .local-version - The current source code controlled package version. This |
| # file is NEVER checked in within the upstream repository, |
| # is auto-generated, and can always be found in both the |
| # build tree and distribution. |
| # |
| # When present, the .local-version file is preferred first, the |
| # .dist-version second, and the .default-version last. |
| # |
| |
| # VERSION_FILE should be and is intentionally an immediate (:=) rather |
| # than a deferred (=) variable to ensure the value binds once and only once |
| # for a given MAKELEVEL even as .local-version and .dist-version are created |
| # during makefile execution. |
| |
| VERSION_FILE := $(if $(wildcard $(builddir)/.local-version),$(builddir)/.local-version,$(if $(wildcard $(srcdir)/.dist-version),$(srcdir)/.dist-version,$(srcdir)/.default-version)) |
| |
| # |
| # Override autotool's default notion of the package version variables. |
| # This ensures that when we create a source distribution the |
| # version is always the current version, not the package bootstrap |
| # version. |
| # |
| # The include ensures that we update CHIP_VERSION and VERSION once |
| # we've built .local-version (the source of truth unless CHIP_VERSION |
| # is specified on the make command line). |
| # |
| # CHIP_VERSION can be overridden from the command line, but when the version is NOT |
| # overridden that we bind the version once and only once across potential |
| # sub-makes to prevent the version from flapping as VERSION_FILE changes. |
| # |
| # .local-version.min sets CHIP_VERSION |
| -include .local-version.min |
| |
| PACKAGE_VERSION = $(CHIP_VERSION) |
| VERSION = $(PACKAGE_VERSION) |
| |
| |
| # |
| # check-file-.local-version |
| # |
| # Speculatively regenerate .local-version and check to see if it needs |
| # to be updated. |
| # |
| # If CHIP_VERSION has been supplied anywhere other than in this file |
| # (which is implicitly the contents of .local-version), then use that; |
| # otherwise, attempt to generate it from the SCM system. |
| # |
| # This is called from $(call check-file,.local-version). |
| # |
| define check-file-.local-version |
| $(if $(filter-out file,$(origin CHIP_VERSION)),\ |
| echo "$(CHIP_VERSION)" > "$(2)",\ |
| $(abs_top_nlbuild_autotools_dir)/scripts/mkversion \ |
| -b "$(CHIP_VERSION)" "$(top_srcdir)" \ |
| > "$(2)") |
| endef |
| |
| |
| # |
| # check-file-.dist-version |
| # |
| # Speculatively regenerate .dist-version and check to see if it needs |
| # to be updated. |
| # |
| # This is called from $(call check-file,.dist-version). |
| # |
| define check-file-.dist-version |
| cat "$(1)" > "$(2)" |
| endef |
| |
| # |
| # A convenience target to allow package users to easily rerun the |
| # package configuration according to the current configuration. |
| # |
| .PHONY: reconfigure |
| reconfigure: $(builddir)/config.status |
| $(AM_V_at)$(<) --recheck |
| |
| # |
| # Version file regeneration rules. |
| # |
| .PHONY: force |
| |
| $(builddir)/.local-version: $(srcdir)/.default-version force |
| |
| $(distdir)/.dist-version: $(builddir)/.local-version force |
| |
| $(distdir)/.dist-version $(builddir)/.local-version: |
| $(call check-file,$(@F)) |
| |
| $(builddir)/.local-version.min: $(builddir)/.local-version |
| (printf "export CHIP_VERSION=" ; cat) < "$(VERSION_FILE)" > $@ |
| |
| |
| # |
| # When we run 'distcheck' and --with-<any of the third-party packages |
| # listed in repos.conf>, default to 'internal', the nlbuild-autotools |
| # infrastructure will attempt to create git paths to manage the |
| # package repo. Two directories need to be writable to facilitate |
| # this. |
| # |
| |
| DISTCHECK_CONFIGURE_FLAGS = `chmod u+w ../.. ../../third_party` |
| |
| all-recursive check-recursive coverage-recursive install-recursive pretty-recursive pretty-check-recursive dist distcheck distdir install-headers: $(BUILT_SOURCES) |
| |
| dist-hook: $(distdir)/.dist-version |
| |
| # If you are synchronizing a package on which yours depends using 'repos.conf', |
| # to 'third_party', uncomment and adapt or delete this, as needed. If you choose |
| # to use this, please also take a look at Makefile.am and third_party/Makefile.am |
| # and uncomment the appropriate sections there. |
| |
| # |
| # Ensure any locally synchronized repositories defined by 'repos.conf' |
| # are cleaned up. |
| # |
| distclean-local: |
| $(MAKE) -C $(srcdir) -f Makefile-bootstrap clean-repos |
| |
| # |
| # Top-level convenience target for making documentation. |
| # |
| |
| .PHONY: doc |
| doc: $(BUILT_SOURCES) |
| $(MAKE) -C docs $(@) |
| |
| # |
| # Top-level convenience target for making a documentation-only |
| # distribution whose results appear at the top level of the build tree |
| # in the same fashion that the distribution would be for 'make dist'. |
| # |
| |
| .PHONY: docdist |
| docdist: $(BUILT_SOURCES) |
| $(MAKE) -C docs docdistdir=$(abs_builddir) $(@) |
| |
| # |
| # Top-level convenience target for making a tools-only distribution |
| # whose resuls appear at the top level of the build tree in the same |
| # fashion that the distribution would be for 'make dist'. |
| # |
| |
| tooldistdir ?= $(abs_builddir) |
| |
| chip_tooldist_alias = \ |
| $(PACKAGE_TARNAME)-tools |
| |
| chip_tooldist_name = \ |
| $(chip_tooldist_alias)-$(shell echo $(target) | $(SED) -e 's/[[:digit:].]*$$//g')-$(CHIP_VERSION) |
| |
| chip_tooldist_archive = \ |
| $(tooldistdir)/$(chip_tooldist_name).tar.gz |
| |
| CLEANFILES = \ |
| $(chip_tooldist_archive) \ |
| $(NULL) |
| |
| $(chip_tooldist_name): |
| $(AM_V_at)rm -f -r "$(@)" |
| $(call create-directory) |
| $(MAKE) DESTDIR=$(tooldistdir)/$(chip_tooldist_name) install |
| $(AM_V_at)rm -f -r \ |
| "$(@)/include" \ |
| "$(@)/lib/engines" \ |
| "$(@)/lib/libcrypto.a" \ |
| "$(@)/lib/libssl.a" \ |
| "$(@)/lib/pkgconfig" \ |
| "$(@)/openssl" \ |
| "$(@)/share/java" |
| |
| $(chip_tooldist_archive): $(chip_tooldist_name) |
| $(AM_V_at)echo " TAR $(@)" |
| $(AM_V_at)tardir="$(<)" && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c > "$(@)" && rm -rf "$(<)" |
| |
| .PHONY: tooldist |
| tooldist $(chip_tooldist_alias): $(chip_tooldist_archive) |
| |
| # |
| # By virtue of the way we allow for the creation of both libChip and |
| # libInetLayer, using the same makefile fragment included in the |
| # Makefile.am of each of those libraries, running 'make distclean' |
| # will fail in src/lib after running in src/inet because the |
| # dependencies for the latter have already been cleaned for the |
| # former. |
| # |
| # In general, we don't really care about this specifically or if a |
| # particular step of distclean fails generally, so propagate the |
| # --ignore-errors and --keep-going flags for make on recursive |
| # distclean to avoid this. |
| # |
| |
| distclean-recursive: AM_MAKEFLAGS += -ik |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/post.am |
