| /* |
| * |
| * Copyright (c) 2021-2022 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @brief Defines a table of fabrics that have provisioned the device. |
| */ |
| |
| #pragma once |
| |
| #include <algorithm> |
| |
| #include <app/util/basic-types.h> |
| #include <credentials/CHIPCert.h> |
| #include <credentials/CHIPCertificateSet.h> |
| #include <credentials/CertificateValidityPolicy.h> |
| #include <credentials/LastKnownGoodTime.h> |
| #include <credentials/OperationalCertificateStore.h> |
| #include <crypto/CHIPCryptoPAL.h> |
| #include <crypto/OperationalKeystore.h> |
| #include <lib/core/CHIPEncoding.h> |
| #include <lib/core/CHIPPersistentStorageDelegate.h> |
| #include <lib/core/CHIPSafeCasts.h> |
| #include <lib/core/Optional.h> |
| #include <lib/core/ScopedNodeId.h> |
| #include <lib/core/TLV.h> |
| #include <lib/support/BitFlags.h> |
| #include <lib/support/CHIPMem.h> |
| #include <lib/support/DLLUtil.h> |
| #include <lib/support/Span.h> |
| |
| namespace chip { |
| |
| static constexpr uint8_t kFabricLabelMaxLengthInBytes = 32; |
| |
| static_assert(kUndefinedFabricIndex < chip::kMinValidFabricIndex, "Undefined fabric index should not be valid"); |
| |
| /** |
| * Provides access to the core metadata for a given fabric to which a node is joined. |
| * |
| * This metadata includes: |
| * |
| * - FabricIndex within the local set of fabrics |
| * - Operational Identity |
| * - NodeId |
| * - Fabric Id |
| * - Public key of operational root CA (to avoid keeping/reloading RCAC (Root CA Certificate) too often) |
| * - Pre-computed "Compressed Fabric ID" used for discovery |
| * - Operational public key (if externally injected as opposed to present in an OperationalKeystore) |
| * - Fabric Label |
| * - VendorID allocated at fabric joining by commissioner |
| * |
| * NOTE: All the setters of this class are private and only accessible by FabricTable, the |
| * friend class that owns these. The reason is that there are data dependencies between |
| * fabrics that require FabricTable to be the single entrypoint for all mutations, rather |
| * than directly on a FabricInfo instance. |
| */ |
| class DLL_EXPORT FabricInfo |
| { |
| public: |
| FabricInfo() { Reset(); } |
| ~FabricInfo() { Reset(); } |
| |
| // Non-copyable |
| FabricInfo(FabricInfo const &) = delete; |
| void operator=(FabricInfo const &) = delete; |
| |
| // Returns a span into our internal storage. |
| CharSpan GetFabricLabel() const { return CharSpan(mFabricLabel, strnlen(mFabricLabel, kFabricLabelMaxLengthInBytes)); } |
| CHIP_ERROR SetFabricLabel(const CharSpan & fabricLabel); |
| |
| NodeId GetNodeId() const { return mNodeId; } |
| ScopedNodeId GetScopedNodeId() const { return ScopedNodeId(mNodeId, mFabricIndex); } |
| ScopedNodeId GetScopedNodeIdForNode(const NodeId node) const { return ScopedNodeId(node, mFabricIndex); } |
| |
| // TODO(#15049): Refactor/rename PeerId to OperationalId or OpId throughout source |
| PeerId GetPeerId() const { return PeerId(mCompressedFabricId, mNodeId); } |
| PeerId GetPeerIdForNode(const NodeId node) const { return PeerId(mCompressedFabricId, node); } |
| |
| FabricId GetFabricId() const { return mFabricId; } |
| FabricIndex GetFabricIndex() const { return mFabricIndex; } |
| |
| CompressedFabricId GetCompressedFabricId() const { return mCompressedFabricId; } |
| CHIP_ERROR GetCompressedFabricIdBytes(MutableByteSpan & compressedFabricId) const |
| { |
| ReturnErrorCodeIf(compressedFabricId.size() != sizeof(uint64_t), CHIP_ERROR_INVALID_ARGUMENT); |
| Encoding::BigEndian::Put64(compressedFabricId.data(), GetCompressedFabricId()); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR FetchRootPubkey(Crypto::P256PublicKey & outPublicKey) const; |
| |
| VendorId GetVendorId() const { return mVendorId; } |
| |
| bool IsInitialized() const { return (mFabricIndex != kUndefinedFabricIndex) && IsOperationalNodeId(mNodeId); } |
| |
| bool HasOperationalKey() const { return mOperationalKey != nullptr; } |
| |
| bool ShouldAdvertiseIdentity() const { return mShouldAdvertiseIdentity; } |
| |
| friend class FabricTable; |
| |
| private: |
| struct InitParams |
| { |
| CompressedFabricId compressedFabricId = kUndefinedCompressedFabricId; |
| NodeId nodeId = kUndefinedNodeId; |
| FabricIndex fabricIndex = kUndefinedFabricIndex; |
| Crypto::P256Keypair * operationalKeypair = nullptr; |
| FabricId fabricId = kUndefinedFabricId; |
| Crypto::P256PublicKey rootPublicKey; |
| VendorId vendorId = VendorId::NotSpecified; /**< Vendor ID for commissioner of fabric */ |
| bool hasExternallyOwnedKeypair = false; |
| bool advertiseIdentity = false; |
| |
| CHIP_ERROR AreValid() const |
| { |
| VerifyOrReturnError((fabricId != kUndefinedFabricId) && (fabricIndex != kUndefinedFabricIndex), |
| CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrReturnError(IsOperationalNodeId(nodeId), CHIP_ERROR_INVALID_ARGUMENT); |
| // We don't check the root public key validity or the compressed fabric ID, since in the |
| // very small usage that exists in private use, the rest should be OK. |
| return CHIP_NO_ERROR; |
| } |
| }; |
| |
| // Move assignment operator to support setting from pending on fabric table commit |
| void operator=(FabricInfo && other); |
| |
| /** |
| * @brief Initialize a FabricInfo object's metadata given init parameters. |
| * |
| * Note that certificates are never owned by this object and are assumed pre-validated |
| * |
| * @param initParams Init parameters to use to initialize the given fabric. |
| * @return CHIP_NO_ERROR on success or another internal CHIP_ERROR_* value on failure |
| */ |
| CHIP_ERROR Init(const InitParams & initParams); |
| |
| /** |
| * Sets the P256Keypair used for this fabric. This will make a copy of the keypair |
| * via the P256Keypair::Serialize and P256Keypair::Deserialize methods. |
| * |
| * The keyPair argument is safe to deallocate once this method returns. |
| * |
| * If your P256Keypair does not support serialization, use the |
| * `SetExternallyOwnedOperationalKeypair` method instead. |
| */ |
| CHIP_ERROR SetOperationalKeypair(const Crypto::P256Keypair * keyPair); |
| |
| /** |
| * Sets the P256Keypair used for this fabric, delegating ownership of the |
| * key to the caller. The P256Keypair provided here must be freed later by |
| * the caller of this method if it was allocated dynamically. |
| * |
| * This should be used if your P256Keypair does not support serialization |
| * and deserialization (e.g. your private key is held in a secure element |
| * and cannot be accessed directly), or if you back your operational |
| * private keys by external implementation of the cryptographic interfaces. |
| * |
| * To have the ownership of the key managed for you, use |
| * SetOperationalKeypair instead. |
| */ |
| CHIP_ERROR SetExternallyOwnedOperationalKeypair(Crypto::P256Keypair * keyPair); |
| |
| /** |
| * @brief Sign a message with the fabric's operational private key. This ONLY |
| * works if `SetOperationalKeypair` or `SetExternallyOwnedOperationalKeypair` |
| * had been called and is an API that is present ONLY to be called by FabricTable. |
| * |
| * @param message - message to sign |
| * @param outSignature - buffer to hold the signature |
| * @return CHIP_NO_ERROR on success or another CHIP_ERROR on crypto internal errors |
| */ |
| CHIP_ERROR SignWithOpKeypair(ByteSpan message, Crypto::P256ECDSASignature & outSignature) const; |
| |
| /** |
| * Reset the state to a completely uninitialized status. |
| */ |
| void Reset() |
| { |
| mNodeId = kUndefinedNodeId; |
| mFabricId = kUndefinedFabricId; |
| mFabricIndex = kUndefinedFabricIndex; |
| mCompressedFabricId = kUndefinedCompressedFabricId; |
| |
| mVendorId = VendorId::NotSpecified; |
| mFabricLabel[0] = '\0'; |
| |
| if (!mHasExternallyOwnedOperationalKey && mOperationalKey != nullptr) |
| { |
| chip::Platform::Delete(mOperationalKey); |
| } |
| mOperationalKey = nullptr; |
| mHasExternallyOwnedOperationalKey = false; |
| mShouldAdvertiseIdentity = true; |
| |
| mFabricIndex = kUndefinedFabricIndex; |
| mNodeId = kUndefinedNodeId; |
| } |
| |
| void SetShouldAdvertiseIdentity(bool advertiseIdentity) { mShouldAdvertiseIdentity = advertiseIdentity; } |
| |
| static constexpr size_t MetadataTLVMaxSize() |
| { |
| return TLV::EstimateStructOverhead(sizeof(uint16_t), kFabricLabelMaxLengthInBytes); |
| } |
| |
| static constexpr size_t OpKeyTLVMaxSize() |
| { |
| return TLV::EstimateStructOverhead(sizeof(uint16_t), Crypto::P256SerializedKeypair::Capacity()); |
| } |
| |
| NodeId mNodeId = kUndefinedNodeId; |
| FabricId mFabricId = kUndefinedFabricId; |
| // We cache the compressed fabric id since it's used so often and costly to get. |
| CompressedFabricId mCompressedFabricId = kUndefinedCompressedFabricId; |
| // We cache the root public key since it's used so often and costly to get. |
| Crypto::P256PublicKey mRootPublicKey; |
| |
| // mFabricLabel is 33 bytes, so ends on a 1 mod 4 byte boundary. |
| char mFabricLabel[kFabricLabelMaxLengthInBytes + 1] = { '\0' }; |
| |
| // mFabricIndex, mVendorId, mHasExternallyOwnedOperationalKey, |
| // mShouldAdvertiseIdentity are 5 bytes and do not include any padding if |
| // they come after the 33-byte mFabricLabel, so end on a 2 mod 4 byte |
| // boundary. |
| FabricIndex mFabricIndex = kUndefinedFabricIndex; |
| VendorId mVendorId = VendorId::NotSpecified; |
| bool mHasExternallyOwnedOperationalKey = false; |
| bool mShouldAdvertiseIdentity = true; |
| |
| // 2 bytes of padding here, since mOperationalKey needs to be void*-aligned, |
| // so has to be at a 0 mod 4 byte location. |
| |
| mutable Crypto::P256Keypair * mOperationalKey = nullptr; |
| |
| CHIP_ERROR CommitToStorage(PersistentStorageDelegate * storage) const; |
| CHIP_ERROR LoadFromStorage(PersistentStorageDelegate * storage, FabricIndex newFabricIndex, const ByteSpan & rcac, |
| const ByteSpan & noc); |
| }; |
| |
| /** |
| * Iterates over valid fabrics within a list |
| */ |
| |
| class ConstFabricIterator |
| { |
| public: |
| using value_type = FabricInfo; |
| using pointer = FabricInfo *; |
| using reference = FabricInfo &; |
| |
| ConstFabricIterator(const FabricInfo * start, const FabricInfo * pending, size_t index, size_t maxSize) : |
| mStart(start), mPending(pending), mIndex(index), mMaxSize(maxSize) |
| { |
| if (mIndex >= maxSize) |
| { |
| mIndex = maxSize; |
| } |
| else if (!mStart[mIndex].IsInitialized()) |
| { |
| Advance(); |
| } |
| } |
| ConstFabricIterator(const ConstFabricIterator &) = default; |
| ConstFabricIterator & operator=(const ConstFabricIterator &) = default; |
| |
| ConstFabricIterator & operator++() { return Advance(); } |
| ConstFabricIterator operator++(int) |
| { |
| ConstFabricIterator other(*this); |
| Advance(); |
| return other; |
| } |
| |
| const FabricInfo & operator*() const |
| { |
| VerifyOrDie(!IsAtEnd()); |
| |
| return *GetCurrent(); |
| } |
| const FabricInfo * operator->() const |
| { |
| VerifyOrDie(!IsAtEnd()); |
| |
| return GetCurrent(); |
| } |
| |
| bool operator==(const ConstFabricIterator & other) const |
| { |
| if (IsAtEnd()) |
| { |
| return other.IsAtEnd(); |
| } |
| |
| // Pending entry does not participate in finding this. |
| return (mStart == other.mStart) && (mIndex == other.mIndex) && (mMaxSize == other.mMaxSize); |
| } |
| bool operator!=(const ConstFabricIterator & other) const { return !(*this == other); } |
| |
| bool IsAtEnd() const { return (mIndex == mMaxSize); } |
| |
| private: |
| const FabricInfo * mStart; |
| const FabricInfo * mPending; ///< Pointer to the shadow pending entry, nullptr if none |
| size_t mIndex; |
| size_t mMaxSize; |
| |
| // Helper to get either a given entry of the fabric table, or its pending shadow if |
| // a fabric update is currently pending. |
| const FabricInfo * GetCurrent() const |
| { |
| const auto * current = mStart + mIndex; |
| |
| // If we reached the pending entry, return that instead of the underlying entry from the mStates. |
| if ((mPending != nullptr) && mPending->IsInitialized() && (current->GetFabricIndex() == mPending->GetFabricIndex())) |
| { |
| current = mPending; |
| } |
| |
| return current; |
| } |
| |
| ConstFabricIterator & Advance() |
| { |
| do |
| { |
| if (mIndex < mMaxSize) |
| { |
| mIndex++; |
| } |
| } while (!IsAtEnd() && !mStart[mIndex].IsInitialized()); |
| |
| return *this; |
| } |
| }; |
| |
| class DLL_EXPORT FabricTable |
| { |
| public: |
| struct DLL_EXPORT InitParams |
| { |
| // PersistentStorageDelegate for Fabric Info metadata storage and Fabric Table index (MANDATORY). |
| PersistentStorageDelegate * storage = nullptr; |
| // Operational Keystore to abstract access to key. Mandatory for commissionable devices (e.g. |
| // chip::Server-based things) and recommended for controllers. With this set to false, FabricInfo |
| // added as new fabrics need to have directly injected operational keys with FabricInfo::Set*OperationalKey. |
| Crypto::OperationalKeystore * operationalKeystore = nullptr; |
| // Operational Certificate store to hold the NOC/ICAC/RCAC chains (MANDATORY). |
| Credentials::OperationalCertificateStore * opCertStore = nullptr; |
| }; |
| |
| class DLL_EXPORT Delegate |
| { |
| public: |
| Delegate() {} |
| virtual ~Delegate() {} |
| |
| /** |
| * Gets called when a fabric is about to be deleted, such as on |
| * FabricTable::Delete(). This allows actions to be taken that need the |
| * fabric to still be around before we delete it. |
| **/ |
| virtual void FabricWillBeRemoved(const FabricTable & fabricTable, FabricIndex fabricIndex) {} |
| |
| /** |
| * Gets called when a fabric is deleted, such as on FabricTable::Delete(). |
| **/ |
| virtual void OnFabricRemoved(const FabricTable & fabricTable, FabricIndex fabricIndex) {} |
| |
| /** |
| * Gets called when a fabric in Fabric Table is persisted to storage, by CommitPendingFabricData. |
| **/ |
| virtual void OnFabricCommitted(const FabricTable & fabricTable, FabricIndex fabricIndex){}; |
| |
| /** |
| * Gets called when operational credentials are changed, which may not be persistent. |
| * |
| * Can be used to affect what is needed for UpdateNOC prior to commit. |
| **/ |
| virtual void OnFabricUpdated(const FabricTable & fabricTable, FabricIndex fabricIndex){}; |
| |
| // Intrusive list pointer for FabricTable to manage the entries. |
| Delegate * next = nullptr; |
| }; |
| |
| public: |
| FabricTable() = default; |
| ~FabricTable() = default; |
| |
| // Non-copyable |
| FabricTable(FabricTable const &) = delete; |
| void operator=(FabricTable const &) = delete; |
| |
| enum class AdvertiseIdentity : uint8_t |
| { |
| Yes, |
| No |
| }; |
| |
| // Returns CHIP_ERROR_NOT_FOUND if there is no fabric for that index. |
| CHIP_ERROR Delete(FabricIndex fabricIndex); |
| void DeleteAllFabrics(); |
| |
| // TODO this #if CONFIG_BUILD_FOR_HOST_UNIT_TEST is temporary. There is a change incoming soon |
| // that will allow triggering NOC update directly. |
| #if CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| void SendUpdateFabricNotificationForTest(FabricIndex fabricIndex) { NotifyFabricUpdated(fabricIndex); } |
| #endif // CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| |
| /** |
| * Collection of methods to help find a matching FabricInfo instance given a set of query criteria |
| * |
| */ |
| |
| /** |
| * Finds a matching FabricInfo instance given a root public key and fabric ID that uniquely identifies the fabric in any scope. |
| * |
| * Returns nullptr if no matching instance is found. |
| * |
| */ |
| const FabricInfo * FindFabric(const Crypto::P256PublicKey & rootPubKey, FabricId fabricId) const; |
| |
| /** |
| * Finds a matching FabricInfo instance given a locally-scoped fabric index. |
| * |
| * Returns nullptr if no matching instance is found. |
| * |
| */ |
| const FabricInfo * FindFabricWithIndex(FabricIndex fabricIndex) const; |
| |
| /** |
| * Finds a matching FabricInfo instance given a root public key, fabric ID AND a matching NodeId. This variant of find |
| * is only to be used when it is possible to have colliding fabrics in the table that are on the same logical fabric |
| * but may be associated with different node identities. |
| * |
| * Returns nullptr if no matching instance is found. |
| * |
| */ |
| const FabricInfo * FindIdentity(const Crypto::P256PublicKey & rootPubKey, FabricId fabricId, NodeId nodeId) const; |
| |
| /** |
| * Finds a matching FabricInfo instance given a compressed fabric ID. If there are multiple |
| * matching FabricInfo instances given the low but non-zero probability of collision, there is no guarantee |
| * on which instance will be returned. |
| * |
| * Returns nullptr if no matching instance is found. |
| */ |
| const FabricInfo * FindFabricWithCompressedId(CompressedFabricId compressedFabricId) const; |
| |
| CHIP_ERROR Init(const FabricTable::InitParams & initParams); |
| void Shutdown(); |
| |
| /** |
| * @brief If `Init()` caused a Delete due to partial commit, the fabric index at play is returned. |
| * |
| * Allows caller to schedule more clean-up. This is because at Init() time, none of the delegates |
| * are registered yet, so no other modules would learn of the removal. |
| * |
| * The value is auto-reset to `kUndefinedFabricIndex` on being returned, so that subsequent |
| * `GetDeletedFabricFromCommitMarker()` after one that has a fabric index to give will provide |
| * `kUndefinedFabricIndex`. |
| * |
| * @return the fabric index of a just-deleted fabric, or kUndefinedFabricIndex if none were deleted. |
| */ |
| FabricIndex GetDeletedFabricFromCommitMarker(); |
| |
| /** |
| * @brief Clear the commit marker when we are sure we have proceeded with any remaining clean-up |
| */ |
| void ClearCommitMarker(); |
| |
| // Forget a fabric in memory: doesn't delete any persistent state, just |
| // reverts any pending state (blindly) and then resets the fabric table |
| // entry. |
| // |
| // TODO: We have to determine if we should remove this call. |
| void Forget(FabricIndex fabricIndex); |
| |
| CHIP_ERROR AddFabricDelegate(FabricTable::Delegate * delegate); |
| void RemoveFabricDelegate(FabricTable::Delegate * delegate); |
| |
| /** |
| * @brief Set the Fabric Label for the fabric referred by `fabricIndex`. |
| * |
| * If a fabric add/update is pending, only the pending version will be updated, |
| * so that on fail-safe expiry, you would actually see the only fabric label if |
| * Update fails. If the fabric label is set before UpdateNOC, then the change is immediate. |
| * |
| * @param fabricIndex - Fabric Index for which to set the label |
| * @param fabricLabel - Label to set on the fabric |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if fabricIndex does not refer to an fabric in the table |
| * @retval CHIP_ERROR_INVALID_ARGUMENT on fabric label error (e.g. too large) |
| * @retval other CHIP_ERROR on internal errors |
| */ |
| CHIP_ERROR SetFabricLabel(FabricIndex fabricIndex, const CharSpan & fabricLabel); |
| |
| /** |
| * @brief Get the Fabric Label for a given fabric |
| * |
| * NOTE: The outFabricLabel argument points to internal memory of the fabric info. |
| * It may become invalid on the next FabricTable API call due to shadow |
| * storage of data. |
| * |
| * @param fabricIndex - Fabric index for which to get the label |
| * @param outFabricLabel - char span that will be set to the label value |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX on error |
| * @retval other CHIP_ERROR on internal errors |
| */ |
| CHIP_ERROR GetFabricLabel(FabricIndex fabricIndex, CharSpan & outFabricLabel); |
| |
| /** |
| * Get the current Last Known Good Time. |
| * |
| * @param lastKnownGoodChipEpochTime (out) the current last known good time, if any is known |
| * @return CHIP_NO_ERROR on success, else an appropriate CHIP_ERROR |
| */ |
| CHIP_ERROR GetLastKnownGoodChipEpochTime(System::Clock::Seconds32 & lastKnownGoodChipEpochTime) const |
| { |
| return mLastKnownGoodTime.GetLastKnownGoodChipEpochTime(lastKnownGoodChipEpochTime); |
| } |
| |
| /** |
| * Validate that the passed Last Known Good Time is within bounds and then |
| * store this and write back to storage. Legal values are those which are |
| * not earlier than firmware build time or any of our stored certificates' |
| * NotBefore times: |
| * |
| * 3.5.6.1. Last Known Good UTC Time |
| * |
| * A Node MAY adjust the Last Known Good UTC Time backwards if it |
| * believes the current Last Known Good UTC Time is incorrect and it has |
| * a good time value from a trusted source. The Node SHOULD NOT adjust |
| * the Last Known Good UTC to a time before the later of: |
| * • The build timestamp of its currently running software image |
| * • The not-before timestamp of any of its operational certificates |
| * |
| * @param lastKnownGoodChipEpochTime Last Known Good Time in seconds since CHIP epoch |
| * @return CHIP_NO_ERROR on success, else an appopriate CHIP_ERROR |
| */ |
| CHIP_ERROR SetLastKnownGoodChipEpochTime(System::Clock::Seconds32 lastKnownGoodChipEpochTime); |
| |
| /** |
| * @return the number of fabrics currently accessible/usable/iterable. |
| */ |
| uint8_t FabricCount() const { return mFabricCount; } |
| |
| ConstFabricIterator cbegin() const |
| { |
| const FabricInfo * pending = GetShadowPendingFabricEntry(); |
| return ConstFabricIterator(mStates, pending, 0, CHIP_CONFIG_MAX_FABRICS); |
| } |
| ConstFabricIterator cend() const |
| { |
| return ConstFabricIterator(mStates, nullptr, CHIP_CONFIG_MAX_FABRICS, CHIP_CONFIG_MAX_FABRICS); |
| } |
| ConstFabricIterator begin() const { return cbegin(); } |
| ConstFabricIterator end() const { return cend(); } |
| |
| /** |
| * @brief Get the RCAC (operational root certificate) associated with a fabric. |
| * |
| * If a root is pending for `fabricIndex` from `AddNewPendingTrustedRootCert`, it is returned. |
| * |
| * @param fabricIndex - Fabric for which to get the RCAC |
| * @param outCert - MutableByteSpan to receive the certificate. Resized to actual size. |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_BUFFER_TOO_SMALL if `outCert` is too small |
| * @retval CHIP_ERROR_NOT_FOUND if not found/available |
| * @retval other CHIP_ERROR values on invalid arguments or internal errors. |
| */ |
| CHIP_ERROR FetchRootCert(FabricIndex fabricIndex, MutableByteSpan & outCert) const; |
| |
| /** |
| * @brief Get the pending root certificate which is not associated with a fabric, if there is one. |
| * |
| * If a root is pending from `AddNewPendingTrustedRootCert`, and there is no |
| * fabric associated with the corresponding fabric index yet |
| * (i.e. `AddNewPendingFabric*` has not been called yet) it is returned. |
| * |
| * @param outCert - MutableByteSpan to receive the certificate. Resized to actual size. |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_BUFFER_TOO_SMALL if `outCert` is too small. |
| * @retval CHIP_ERROR_NOT_FOUND if there is no pending root certificate |
| * that's not yet associated with a fabric. |
| * @retval other CHIP_ERROR values on invalid arguments or internal errors. |
| */ |
| CHIP_ERROR FetchPendingNonFabricAssociatedRootCert(MutableByteSpan & outCert) const; |
| |
| /** |
| * @brief Get the ICAC (operational intermediate certificate) associated with a fabric. |
| * |
| * If a fabric is pending from add/update operation for the given `fabricIndex`, its |
| * ICAC is returned. |
| * |
| * If an NOC exists, but the ICAC is not present in the chain, CHIP_NO_ERROR is |
| * returned and `outCert` is resized to 0 length so that its `empty()` method returns true. |
| * |
| * @param fabricIndex - Fabric for which to get the ICAC |
| * @param outCert - MutableByteSpan to receive the certificate. Resized to actual size. |
| * @retval CHIP_NO_ERROR on success, including if absent within an existing chain |
| * @retval CHIP_ERROR_BUFFER_TOO_SMALL if `outCert` is too small |
| * @retval CHIP_ERROR_NOT_FOUND if not found/available |
| * @retval other CHIP_ERROR values on invalid arguments or internal errors. |
| */ |
| CHIP_ERROR FetchICACert(FabricIndex fabricIndex, MutableByteSpan & outCert) const; |
| |
| /** |
| * @brief Get the NOC (Node Operational Certificate) associated with a fabric. |
| * |
| * If a fabric is pending from add/update operation for the given `fabricIndex`, its |
| * NOC is returned. |
| * |
| * @param fabricIndex - Fabric for which to get the NOC |
| * @param outCert - MutableByteSpan to receive the certificate. Resized to actual size. |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_BUFFER_TOO_SMALL if `outCert` is too small |
| * @retval CHIP_ERROR_NOT_FOUND if not found/available |
| * @retval other CHIP_ERROR values on invalid arguments or internal errors. |
| */ |
| CHIP_ERROR FetchNOCCert(FabricIndex fabricIndex, MutableByteSpan & outCert) const; |
| |
| /** |
| * @brief Get the root public key by value for the given `fabricIndex`. |
| * |
| * @param fabricIndex - Fabric for which to get the root public key (subject public key of RCAC) |
| * @param outPublicKey - PublicKey instance to receive the public key contents |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_BUFFER_TOO_SMALL if `outCert` is too small |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if not found/available, or `fabricIndex` has a bad value |
| * @retval other CHIP_ERROR values on other invalid arguments or internal errors. |
| */ |
| CHIP_ERROR FetchRootPubkey(FabricIndex fabricIndex, Crypto::P256PublicKey & outPublicKey) const; |
| |
| /** |
| * @brief Get the CASE Authenticated Tags from the NOC for the given `fabricIndex`. |
| * |
| * @param fabricIndex - Fabric for which to get the root public key (subject public key of RCAC) |
| * @param cats - CATValues struct to write the NOC CATs for the given fabric index |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if not found/available, or `fabricIndex` has a bad value |
| * @retval other CHIP_ERROR values on other invalid arguments or internal errors. |
| */ |
| CHIP_ERROR FetchCATs(const FabricIndex fabricIndex, CATValues & cats) const; |
| |
| /** |
| * @brief Sign a message with a given fabric's operational keypair. This is used for |
| * CASE and the only way the key should be used. |
| * |
| * This will use a pending key activated with `ActivatePendingOperationalKey` but |
| * not yet persisted, if one is available for the fabric. |
| * |
| * @param fabricIndex - Fabric index whose operational key touse |
| * @param message - Message to sign |
| * @param outSignature - Signature object to receive the signature |
| * |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if no active key is found for the given `fabricIndex` or if |
| * `fabricIndex` is invalid. |
| * @retval other CHIP_ERROR value on internal errors |
| */ |
| CHIP_ERROR SignWithOpKeypair(FabricIndex fabricIndex, ByteSpan message, Crypto::P256ECDSASignature & outSignature) const; |
| |
| /** |
| * @brief Create an ephemeral keypair for use in session establishment. |
| * |
| * WARNING: The return value MUST be released by `ReleaseEphemeralKeypair`. This is because |
| * Matter CHIPMem.h does not properly support UniquePtr in a way that would |
| * safely allow classes derived from Crypto::P256Keypair to be released properly. |
| * |
| * This delegates to the OperationalKeystore if one exists, otherwise it directly allocates a base |
| * Crypto::P256Keypair instance |
| * |
| * @return a pointer to a dynamically P256Keypair (or derived class thereof), which may evaluate to nullptr |
| * if running out of memory. |
| */ |
| Crypto::P256Keypair * AllocateEphemeralKeypairForCASE(); |
| |
| /** |
| * @brief Release an ephemeral keypair previously created by `AllocateEphemeralKeypairForCASE()` |
| */ |
| void ReleaseEphemeralKeypair(Crypto::P256Keypair * keypair); |
| |
| /** |
| * This initializes a new keypair for the given fabric and generates a CSR for it, |
| * so that it can be passed in a CSRResponse. |
| * |
| * The keypair is temporary and becomes usable for `SignWithOpKeypair` only after either |
| * `ActivatePendingOperationalKey` is called. It is destroyed if |
| * `RevertPendingFabricData` is called before `CommitPendingFabricData`. |
| * If a pending keypair for the provided fabricIndex (if present) already existed, it is replaced by this call. |
| * |
| * Only one pending operational keypair is supported at a time. |
| * |
| * @param fabricIndex - Existing FabricIndex for which a new keypair must be made available. If it |
| * doesn't have a value, the key will be marked pending for the next available |
| * fabric index that would apply for `AddNewFabric`. |
| * @param outputCsr - Buffer to contain the CSR. Must be at least `kMIN_CSR_Buffer_Size` large. |
| * |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_BUFFER_TOO_SMALL if `outputCsr` buffer is too small |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if there is already a pending keypair for another `fabricIndex` value |
| * or if fabricIndex is an invalid value. |
| * @retval other CHIP_ERROR value on internal errors |
| */ |
| CHIP_ERROR AllocatePendingOperationalKey(Optional<FabricIndex> fabricIndex, MutableByteSpan & outputCsr); |
| |
| /** |
| * @brief Returns whether an operational key is pending (true if `AllocatePendingOperationalKey` was |
| * previously successfully called, false otherwise). |
| * |
| * @param outIsPendingKeyForUpdateNoc this is set to true if the `AllocatePendingOperationalKey` had an |
| * associated fabric index attached, indicating it's for UpdateNoc |
| */ |
| bool HasPendingOperationalKey(bool & outIsPendingKeyForUpdateNoc) const; |
| |
| /** |
| * @brief Returns whether an operational key can be used to sign for given FabricIndex |
| * |
| * @param fabricIndex - Fabric index for which an operational key must be found |
| * @return true if a pending fabric or committed fabric for fabricIndex has an operational key, false otherwise. |
| */ |
| bool HasOperationalKeyForFabric(FabricIndex fabricIndex) const; |
| |
| /** |
| * @brief If a newly-added fabric is pending, this returns its index, or kUndefinedFabricIndex if none are pending. |
| * |
| * A newly-added fabric is pending if AddNOC has been previously called successfully but the |
| * fabric is not yet fully committed by CommissioningComplete. |
| * |
| * NOTE: that this never returns a value other than kUndefinedFabricIndex when UpdateNOC is pending. |
| * |
| * @return the fabric index of the pending fabric, or kUndefinedFabricIndex if no fabrics are pending. |
| */ |
| FabricIndex GetPendingNewFabricIndex() const; |
| |
| /** |
| * @brief Returns the operational keystore. This is used for |
| * CASE and the only way the keystore should be used. |
| * |
| * @return The operational keystore, nullptr otherwise. |
| */ |
| const Crypto::OperationalKeystore * GetOperationalKeystore() { return mOperationalKeystore; } |
| |
| /** |
| * @brief Add a pending trusted root certificate for the next fabric created with `AddNewPendingFabric*` methods. |
| * |
| * The root only becomes actually pending when the `AddNewPendingFabric*` is called afterwards. It is reverted |
| * if `RevertPendingFabricData` is called. |
| * |
| * This method with fail with CHIP_ERROR_INCORRECT_STATE in a variety of illogical/inconsistent conditions, |
| * which always can be cleared with `RevertPendingFabricData`. Such a situation is calling this method after |
| * `UpdatePendingFabric` which would mean logical collision of an addition and an update. |
| * |
| * @param rcac - Root certificate in Matter Operational Certificate Encoding (TLV) format |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INCORRECT_STATE if this is called in an inconsistent order |
| * @retval CHIP_ERROR_NO_MEMORY if there is insufficient memory to make the root pending |
| * @retval CHIP_ERROR_INVALID_ARGUMENT if the RCAC is too large (further checks are done on `AddNewPendingFabric*`) |
| * @retval other CHIP_ERROR on internal errors. |
| */ |
| CHIP_ERROR AddNewPendingTrustedRootCert(const ByteSpan & rcac); |
| |
| /** |
| * @brief Use an NOC and optional ICAC chaining back to the pending RCAC to activate a new fabric |
| * |
| * Operational key is assumed to be pending or committed in the associated mOperationalKeystore. |
| * |
| * The fabric becomes temporarily active for purposes of `Fetch*` and `SignWithOpKeyPair`, etc. |
| * The new fabric becomes permanent/persisted on successful `CommitPendingFabricData`. It disappears |
| * on `RevertPendingFabricData` or `RevertPendingOpCertsExceptRoot`. |
| * |
| * This method with fail with CHIP_ERROR_INCORRECT_STATE in a variety of illogical/inconsistent conditions, |
| * which always can be cleared with `RevertPendingFabricData`. Such a situation is calling this method after |
| * `UpdatePendingFabric*` which would mean logical collision of an addition and an update. |
| * |
| * If a pending key was present in the OperationalKeystore associated with this FabricTable, |
| * it is activated on success. |
| * |
| * |
| * @param noc - NOC for the fabric. Must match an existing or pending operational keypair in the mOperationalKeystore. |
| * @param icac - ICAC for the fabric. Can be empty if absent from the chain. |
| * @param vendorId - VendorID to use for the new fabric |
| * @param outNewFabricIndex - Pointer where the new fabric index for the fabric just added will be set. Cannot be nullptr. |
| * |
| * @retval CHIP_NO_ERROR on success. |
| * @retval CHIP_ERROR_INCORRECT_STATE if this is called in an inconsistent order. |
| * @retval CHIP_ERROR_NO_MEMORY if there is insufficient memory to make the fabric pending. |
| * @retval CHIP_ERROR_INVALID_ARGUMENT if any of the arguments are invalid such as too large or out of bounds. |
| * @retval CHIP_ERROR_FABRIC_EXISTS if operational identity collides with one already present. |
| * @retval other CHIP_ERROR_* on internal errors or certificate validation errors. |
| */ |
| CHIP_ERROR AddNewPendingFabricWithOperationalKeystore(const ByteSpan & noc, const ByteSpan & icac, uint16_t vendorId, |
| FabricIndex * outNewFabricIndex, |
| AdvertiseIdentity advertiseIdentity = AdvertiseIdentity::Yes) |
| { |
| return AddNewPendingFabricCommon(noc, icac, vendorId, nullptr, false, advertiseIdentity, outNewFabricIndex); |
| }; |
| |
| /** |
| * @brief Use an NOC and optional ICAC chaining back to the pending RCAC to activate a new fabric |
| * |
| * Operational key is injected, and then owned by the fabric (!isExistingOpKeyExternallyOwned) or |
| * owned externally if `isExistingOpKeyExternallyOwned` is true). |
| * |
| * WARNING: Copying keypairs is unsafe and not recommended. Consider using |
| * AddNewPendingFabricWithOperationalKeystore and an associated OperationalKeystore |
| * or always using `isExistingOpKeyExternallyOwned`, with `existingOpKey` being a safe |
| * class derived from P256Keypair that avoids the true private key persisting in memory. |
| * |
| * For rest of semantics outside of operational key, @see AddNewPendingFabricWithOperationalKeystore |
| * |
| * @param noc - NOC for the fabric. Public key must match the `existingOpKey`'s public key |
| * @param icac - ICAC for the fabric. Can be empty if absent from the chain. |
| * @param vendorId - VendorID to use for the new fabric |
| * @param existingOpKey - Existing operational key to ingest for use in the fabric. Cannot be nullptr. |
| * @param isExistingOpKeyExternallyOwned - if true, operational key must outlive the fabric. If false, the key is |
| * copied using P256Keypair::Serialize/Deserialize and owned in heap of a FabricInfo. |
| * @param outNewFabricIndex - Pointer where the new fabric index for the fabric just added will be set. Cannot be nullptr. |
| * |
| * @retval CHIP_NO_ERROR on success. |
| * @retval CHIP_ERROR_INCORRECT_STATE if this is called in an inconsistent order. |
| * @retval CHIP_ERROR_NO_MEMORY if there is insufficient memory to make the fabric pending. |
| * @retval CHIP_ERROR_INVALID_ARGUMENT if any of the arguments are invalid such as too large or out of bounds. |
| * @retval CHIP_ERROR_FABRIC_EXISTS if operational identity collides with one already present. |
| * @retval other CHIP_ERROR_* on internal errors or certificate validation errors. |
| */ |
| CHIP_ERROR AddNewPendingFabricWithProvidedOpKey(const ByteSpan & noc, const ByteSpan & icac, uint16_t vendorId, |
| Crypto::P256Keypair * existingOpKey, bool isExistingOpKeyExternallyOwned, |
| FabricIndex * outNewFabricIndex, |
| AdvertiseIdentity advertiseIdentity = AdvertiseIdentity::Yes) |
| { |
| return AddNewPendingFabricCommon(noc, icac, vendorId, existingOpKey, isExistingOpKeyExternallyOwned, advertiseIdentity, |
| outNewFabricIndex); |
| }; |
| |
| /** |
| * @brief Use an NOC and optional ICAC to update an existing fabric |
| * |
| * Operational key is assumed to be pending or committed in the associated mOperationalKeystore. |
| * |
| * The new NOC chain becomes temporarily active for purposes of `Fetch*` and `SignWithOpKeyPair`, etc. |
| * The RCAC remains as before. For this method call to succeed, NOC chain must chain back to the existing RCAC. |
| * The update fabric becomes permanent/persisted on successful `CommitPendingFabricData`. Changes revert |
| * on `RevertPendingFabricData` or `RevertPendingOpCertsExceptRoot`. FabricId CANNOT be updated, but |
| * CAT tags and Node ID in NOC can change between previous and new NOC for a given FabricId. |
| * |
| * This method with fail with CHIP_ERROR_INCORRECT_STATE in a variety of illogical/inconsistent conditions, |
| * which always can be cleared with `RevertPendingFabricData`. Such a situation is calling this method after |
| * `AddNewPending*` which would mean logical collision of an addition and an update. |
| * |
| * If a pending key was present in the OperationalKeystore associated with this FabricTable, |
| * it is activated on success. |
| * |
| * @param fabricIndex - fabricIndex of the existing fabric to update |
| * @param noc - Updated NOC for the fabric. Must match an existing or pending operational keypair in the mOperationalKeystore. |
| * @param icac - Update ICAC for the fabric. Can be empty if absent from the chain. |
| * |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if the `fabricIndex` is not an existing fabric |
| * @retval CHIP_ERROR_INCORRECT_STATE if this is called in an inconsistent order |
| * @retval CHIP_ERROR_NO_MEMORY if there is insufficient memory to store the pending updates |
| * @retval CHIP_ERROR_INVALID_ARGUMENT if any of the arguments are invalid such as too large or out of bounds. |
| * @retval other CHIP_ERROR_* on internal errors or certificate validation errors. |
| */ |
| CHIP_ERROR UpdatePendingFabricWithOperationalKeystore(FabricIndex fabricIndex, const ByteSpan & noc, const ByteSpan & icac, |
| AdvertiseIdentity advertiseIdentity = AdvertiseIdentity::Yes) |
| { |
| return UpdatePendingFabricCommon(fabricIndex, noc, icac, nullptr, false, advertiseIdentity); |
| } |
| |
| /** |
| * @brief Use an NOC and optional ICAC to update an existing fabric |
| * |
| * Operational key is injected, and then owned by the fabric (!isExistingOpKeyExternallyOwned) or |
| * owned externally if `isExistingOpKeyExternallyOwned` is true). |
| * |
| * WARNING: Copying keypairs is unsafe and not recommended. Consider using |
| * AddNewPendingFabricWithOperationalKeystore and an associated OperationalKeystore |
| * or always using `isExistingOpKeyExternallyOwned`, with `existingOpKey` being a safe |
| * class derived from P256Keypair that avoids the true private key persisting in memory. |
| * |
| * For rest of semantics outside of operational key, @see UpdatePendingFabricWithOperationalKeystore |
| * |
| * @param fabricIndex - fabricIndex of the existing fabric to update |
| * @param noc - Updated NOC for the fabric. Must match an existing or pending operational keypair in the mOperationalKeystore. |
| * @param icac - Update ICAC for the fabric. Can be empty if absent from the chain. |
| * @param existingOpKey - Existing operational key to ingest for use in the fabric with new NOC. Cannot be nullptr. |
| * @param isExistingOpKeyExternallyOwned - if true, operational key must outlive the fabric. If false, the key is |
| * copied using P256Keypair::Serialize/Deserialize and owned in heap of a FabricInfo. |
| * |
| * @retval CHIP_NO_ERROR on success |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if the `fabricIndex` is not an existing fabric |
| * @retval CHIP_ERROR_INCORRECT_STATE if this is called in an inconsistent order |
| * @retval CHIP_ERROR_NO_MEMORY if there is insufficient memory to store the pending updates |
| * @retval CHIP_ERROR_INVALID_ARGUMENT if any of the arguments are invalid such as too large or out of bounds. |
| * @retval other CHIP_ERROR_* on internal errors or certificate validation errors. |
| */ |
| |
| CHIP_ERROR UpdatePendingFabricWithProvidedOpKey(FabricIndex fabricIndex, const ByteSpan & noc, const ByteSpan & icac, |
| Crypto::P256Keypair * existingOpKey, bool isExistingOpKeyExternallyOwned, |
| AdvertiseIdentity advertiseIdentity = AdvertiseIdentity::Yes) |
| { |
| return UpdatePendingFabricCommon(fabricIndex, noc, icac, existingOpKey, isExistingOpKeyExternallyOwned, advertiseIdentity); |
| } |
| |
| /** |
| * @brief Commit any pending temporary FabricTable state. This is used mostly for affecting |
| * CommissioningComplete. |
| * |
| * On success, any pending information is committed such that after a restart, it would |
| * be found to be the same in persistent storage. |
| * |
| * If no changes were pending and state is internally consistent, this appears as a no-op and returns |
| * CHIP_NO_ERROR. |
| * |
| * If there is any internally inconsistent state, this methods acts the same as RevertPendingFabricData(), |
| * and all state is lost. |
| * |
| * In rare circumstances, and depending on the storage backend for opcerts and operational keys, |
| * an inconsistent state could be left, such as if restarting during storage writes of |
| * CommitPendingFabricData(). If this happens, the next FabricTable::Init() will attempt |
| * to clean-up the pieces. |
| * |
| * @return CHIP_NO_ERROR on success or any other CHIP_ERROR value on internal errors |
| */ |
| CHIP_ERROR CommitPendingFabricData(); |
| |
| /** |
| * @brief Revert any pending state. |
| * |
| * This is used to handle fail-safe expiry of partially configured fabrics, or to recover |
| * from situations where partial state was written and configuration cannot continue properly. |
| * |
| * All pending certificates and operational keys and pending fabric metadata are cleared. |
| */ |
| void RevertPendingFabricData(); |
| |
| /** |
| * @brief Revert only the pending NOC/ICAC and pending added fabric, not RCAC. Used for error handling |
| * during commissioning. |
| */ |
| void RevertPendingOpCertsExceptRoot(); |
| |
| // Verifies credentials, using the root certificate of the provided fabric index. |
| CHIP_ERROR VerifyCredentials(FabricIndex fabricIndex, const ByteSpan & noc, const ByteSpan & icac, |
| Credentials::ValidationContext & context, CompressedFabricId & outCompressedFabricId, |
| FabricId & outFabricId, NodeId & outNodeId, Crypto::P256PublicKey & outNocPubkey, |
| Crypto::P256PublicKey * outRootPublicKey = nullptr) const; |
| |
| // Verifies credentials, using the provided root certificate. |
| static CHIP_ERROR VerifyCredentials(const ByteSpan & noc, const ByteSpan & icac, const ByteSpan & rcac, |
| Credentials::ValidationContext & context, CompressedFabricId & outCompressedFabricId, |
| FabricId & outFabricId, NodeId & outNodeId, Crypto::P256PublicKey & outNocPubkey, |
| Crypto::P256PublicKey * outRootPublicKey = nullptr); |
| /** |
| * @brief Enables FabricInfo instances to collide and reference the same logical fabric (i.e Root Public Key + FabricId). |
| * |
| * *WARNING* This is ONLY to be used when creating multiple controllers on the same fabric OR for test. |
| * |
| */ |
| void PermitCollidingFabrics() { mStateFlags.Set(StateFlags::kAreCollidingFabricsIgnored); } |
| |
| // Add a new fabric for testing. The Operational Key is a raw P256Keypair (public key and private key raw bits) that will |
| // get copied (directly) into the fabric table. |
| CHIP_ERROR AddNewFabricForTest(const ByteSpan & rootCert, const ByteSpan & icacCert, const ByteSpan & nocCert, |
| const ByteSpan & opKeySpan, FabricIndex * outFabricIndex); |
| |
| // Add a new fabric for testing. The Operational Key is a raw P256Keypair (public key and private key raw bits) that will |
| // get copied (directly) into the fabric table. The fabric will NOT be committed, and will remain pending. |
| CHIP_ERROR AddNewUncommittedFabricForTest(const ByteSpan & rootCert, const ByteSpan & icacCert, const ByteSpan & nocCert, |
| const ByteSpan & opKeySpan, FabricIndex * outFabricIndex); |
| |
| // Same as AddNewFabricForTest, but ignore if we are colliding with same <Root Public Key, Fabric Id>, so |
| // that a single fabric table can have N nodes for same fabric. This usually works, but is bad form. |
| CHIP_ERROR AddNewFabricForTestIgnoringCollisions(const ByteSpan & rootCert, const ByteSpan & icacCert, const ByteSpan & nocCert, |
| const ByteSpan & opKeySpan, FabricIndex * outFabricIndex) |
| { |
| PermitCollidingFabrics(); |
| CHIP_ERROR err = AddNewFabricForTest(rootCert, icacCert, nocCert, opKeySpan, outFabricIndex); |
| mStateFlags.Clear(StateFlags::kAreCollidingFabricsIgnored); |
| return err; |
| } |
| |
| // For test only. See definition of `StateFlags::kAbortCommitForTest`. |
| void SetForceAbortCommitForTest(bool abortCommitForTest) |
| { |
| (void) abortCommitForTest; |
| #if CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| if (abortCommitForTest) |
| { |
| mStateFlags.Set(StateFlags::kAbortCommitForTest); |
| } |
| else |
| { |
| mStateFlags.Clear(StateFlags::kAbortCommitForTest); |
| } |
| #endif // CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| } |
| |
| /** |
| * Get the fabric index that will be used for the next fabric that will be |
| * added. Returns error if no more fabrics can be added, otherwise writes |
| * the fabric index that will be used for the next addition into the |
| * outparam. |
| */ |
| CHIP_ERROR PeekFabricIndexForNextAddition(FabricIndex & outIndex); |
| |
| /** |
| * Set the fabric index that will be used fo the next fabric added. |
| * |
| * Returns an error if the |fabricIndex| is already in use. |
| */ |
| CHIP_ERROR SetFabricIndexForNextAddition(FabricIndex fabricIndex); |
| |
| /** |
| * @brief Set the advertising behavior for the fabric identified by `fabricIndex`. |
| * |
| * It is the caller's responsibility to actually restart DNS-SD advertising |
| * as needed after updating this state. |
| * |
| * @param fabricIndex - Fabric Index for which to set the label |
| * @param advertiseIdentity - whether the identity for this fabric should be advertised. |
| * @retval CHIP_ERROR_INVALID_FABRIC_INDEX if fabricIndex does not refer to a fabric in the table |
| */ |
| CHIP_ERROR SetShouldAdvertiseIdentity(FabricIndex fabricIndex, AdvertiseIdentity advertiseIdentity); |
| |
| private: |
| enum class StateFlags : uint16_t |
| { |
| // If true, we are in the process of a fail-safe and there was at least one |
| // operation that caused partial data in the fabric table. |
| kIsPendingFabricDataPresent = (1u << 0), |
| kIsTrustedRootPending = (1u << 1), |
| kIsUpdatePending = (1u << 2), |
| kIsAddPending = (1u << 3), |
| |
| // Only true when `AllocatePendingOperationalKey` has been called |
| kIsOperationalKeyPending = (1u << 4), |
| // True if `AllocatePendingOperationalKey` was for an existing fabric |
| kIsPendingKeyForUpdateNoc = (1u << 5), |
| |
| // True if we allow more than one fabric with same root and fabricId in the fabric table |
| // for test purposes. This disables a collision check. |
| kAreCollidingFabricsIgnored = (1u << 6), |
| |
| // If set to true (only possible on test builds), will cause `CommitPendingFabricData()` to early |
| // return during commit, skipping clean-ups, so that we can validate commit marker fabric removal. |
| kAbortCommitForTest = (1u << 7), |
| }; |
| |
| // Stored to indicate a commit is in progress, so that it can be cleaned-up on next boot |
| // if stopped in the middle. |
| struct CommitMarker |
| { |
| CommitMarker() = default; |
| CommitMarker(FabricIndex fabricIndex_, bool isAddition_) |
| { |
| this->fabricIndex = fabricIndex_; |
| this->isAddition = isAddition_; |
| } |
| FabricIndex fabricIndex = kUndefinedFabricIndex; |
| bool isAddition = false; |
| }; |
| |
| /** |
| * @brief Get a mutable FabricInfo entry from the table by FabricIndex. |
| * |
| * NOTE: This is private for use within the FabricTable itself. All mutations have to go through the |
| * FabricTable public methods that take a FabricIndex so that there are no mutations about which |
| * the FabricTable is unaware, since this would break expectations regarding shadow/pending |
| * entries used during fail-safe. |
| * |
| * @param fabricIndex - fabric index for which to get a mutable FabricInfo entry |
| * @return the FabricInfo entry for the fabricIndex if found, or nullptr if not found |
| */ |
| FabricInfo * GetMutableFabricByIndex(FabricIndex fabricIndex); |
| |
| // Load a FabricInfo metatada item from storage for a given new fabric index. Returns internal error on failure. |
| CHIP_ERROR LoadFromStorage(FabricInfo * fabric, FabricIndex newFabricIndex); |
| |
| // Store a given fabric metadata directly/immediately. Used by internal operations. |
| CHIP_ERROR StoreFabricMetadata(const FabricInfo * fabricInfo) const; |
| |
| // Tries to set `mFabricIndexWithPendingState` and returns false if there's a clash. |
| bool SetPendingDataFabricIndex(FabricIndex fabricIndex); |
| |
| // Core validation logic for fabric additions/updates |
| CHIP_ERROR AddOrUpdateInner(FabricIndex fabricIndex, bool isAddition, Crypto::P256Keypair * existingOpKey, |
| bool isExistingOpKeyExternallyOwned, uint16_t vendorId, AdvertiseIdentity advertiseIdentity); |
| |
| // Common code for fabric addition, for either OperationalKeystore or injected key scenarios. |
| CHIP_ERROR AddNewPendingFabricCommon(const ByteSpan & noc, const ByteSpan & icac, uint16_t vendorId, |
| Crypto::P256Keypair * existingOpKey, bool isExistingOpKeyExternallyOwned, |
| AdvertiseIdentity advertiseIdentity, FabricIndex * outNewFabricIndex); |
| |
| // Common code for fabric updates, for either OperationalKeystore or injected key scenarios. |
| CHIP_ERROR UpdatePendingFabricCommon(FabricIndex fabricIndex, const ByteSpan & noc, const ByteSpan & icac, |
| Crypto::P256Keypair * existingOpKey, bool isExistingOpKeyExternallyOwned, |
| AdvertiseIdentity advertiseIdentity); |
| |
| // Common code for looking up a fabric given a root public key, a fabric ID and an optional node id scoped to that fabric. |
| const FabricInfo * FindFabricCommon(const Crypto::P256PublicKey & rootPubKey, FabricId fabricId, |
| NodeId nodeId = kUndefinedNodeId) const; |
| |
| /** |
| * UpdateNextAvailableFabricIndex should only be called when |
| * mNextAvailableFabricIndex has a value and that value stops being |
| * available. It will set mNextAvailableFabricIndex to the next available |
| * value, or no value if there is none available. |
| */ |
| void UpdateNextAvailableFabricIndex(); |
| |
| /** |
| * Ensure that we have a valid next available fabric index, if that's at all possible. This covers |
| * some FabricIndex allocation corner cases. After this is called, the only way we can fail to have |
| * a next available fabric index is if our fabric table is max-sized (254 entries) and full. |
| */ |
| void EnsureNextAvailableFabricIndexUpdated(); |
| |
| /** |
| * Store our current fabric index state: what our next available index is |
| * and what indices we're using right now. |
| */ |
| CHIP_ERROR StoreFabricIndexInfo() const; |
| |
| /** |
| * @brief Delete all metadata from storage for the given fabric |
| * |
| * @param fabricIndex FabricIndex for which to delete the metadadata |
| * @return CHIP_NO_ERROR on success or another CHIP_ERROR on failure |
| */ |
| CHIP_ERROR DeleteMetadataFromStorage(FabricIndex fabricIndex); |
| |
| /** |
| * @brief Determine if a collision (undesired on AddNOC, necessary on UpdateNOC) exists |
| * between the FabricID in the given noc, and the RCAC found for `currentFabricIndex` |
| * in the op cert store, against an existing fabric in the FabricTable (which could be pending) |
| * |
| * @param currentFabricIndex - pending fabricIndex for which we are trying to Add/Update a NOC |
| * @param noc - NOC cert received that contains FabricID whose collision we care to validate |
| * @param outMatchingFabricIndex - set to the FabricIndex matching the collision or kUndefinedFabricIndex on no collision found |
| * @return CHIP_NO_ERROR on successful update of outMatchingFabricIndex or other CHIP_ERROR on internal errors |
| */ |
| CHIP_ERROR FindExistingFabricByNocChaining(FabricIndex currentFabricIndex, const ByteSpan & noc, |
| FabricIndex & outMatchingFabricIndex) const; |
| |
| /** |
| * @brief Get the shadow FabricInfo entry that is pending for updates, if an |
| * update is in progress. |
| * |
| * @return a pointer to the shadow pending fabric or nullptr if none is active. |
| */ |
| const FabricInfo * GetShadowPendingFabricEntry() const { return HasPendingFabricUpdate() ? &mPendingFabric : nullptr; } |
| |
| // Returns true if we have a shadow entry pending for a fabric update. |
| bool HasPendingFabricUpdate() const |
| { |
| return mPendingFabric.IsInitialized() && |
| mStateFlags.HasAll(StateFlags::kIsPendingFabricDataPresent, StateFlags::kIsUpdatePending); |
| } |
| |
| // Validate an NOC chain at time of adding/updating a fabric (uses VerifyCredentials with additional checks). |
| // The `existingFabricId` is passed for UpdateNOC, and must match the Fabric, to make sure that we are |
| // not trying to change FabricID with UpdateNOC. If set to kUndefinedFabricId, we are doing AddNOC and |
| // we don't need to check match to pre-existing fabric. |
| static CHIP_ERROR ValidateIncomingNOCChain(const ByteSpan & noc, const ByteSpan & icac, const ByteSpan & rcac, |
| FabricId existingFabricId, Credentials::CertificateValidityPolicy * policy, |
| CompressedFabricId & outCompressedFabricId, FabricId & outFabricId, |
| NodeId & outNodeId, Crypto::P256PublicKey & outNocPubkey, |
| Crypto::P256PublicKey & outRootPubkey); |
| |
| /** |
| * Read our fabric index info from the given TLV reader and set up the |
| * fabric table accordingly. |
| */ |
| CHIP_ERROR ReadFabricInfo(TLV::ContiguousBufferTLVReader & reader); |
| |
| CHIP_ERROR NotifyFabricUpdated(FabricIndex fabricIndex); |
| CHIP_ERROR NotifyFabricCommitted(FabricIndex fabricIndex); |
| |
| // Commit management clean-up APIs |
| CHIP_ERROR StoreCommitMarker(const CommitMarker & commitMarker); |
| CHIP_ERROR GetCommitMarker(CommitMarker & outCommitMarker); |
| |
| FabricInfo mStates[CHIP_CONFIG_MAX_FABRICS]; |
| // Used for UpdateNOC pending fabric updates |
| FabricInfo mPendingFabric; |
| PersistentStorageDelegate * mStorage = nullptr; |
| Crypto::OperationalKeystore * mOperationalKeystore = nullptr; |
| Credentials::OperationalCertificateStore * mOpCertStore = nullptr; |
| |
| // FabricTable::Delegate link to first node, since FabricTable::Delegate is a form |
| // of intrusive linked-list item. |
| FabricTable::Delegate * mDelegateListRoot = nullptr; |
| |
| // When mStateFlags.Has(kIsPendingFabricDataPresent) is true, this holds the index of the fabric |
| // for which there is currently pending data. |
| FabricIndex mFabricIndexWithPendingState = kUndefinedFabricIndex; |
| |
| // For when a revert occurs during init, so that more clean-up can be scheduled by caller. |
| FabricIndex mDeletedFabricIndexFromInit = kUndefinedFabricIndex; |
| |
| LastKnownGoodTime mLastKnownGoodTime; |
| |
| // We may not have an mNextAvailableFabricIndex if our table is as large as |
| // it can go and is full. |
| Optional<FabricIndex> mNextAvailableFabricIndex; |
| uint8_t mFabricCount = 0; |
| |
| BitFlags<StateFlags> mStateFlags; |
| }; |
| |
| } // namespace chip |
