# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    12.4.6. [TC-CNET-4.6] [Thread] FAILSAFE_REQUIRED message Validation
    [DUT-Server]

PICS:
    - CNET.S.F01

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Commission TH and DUT on Thread setup"
      verification: |

      disabled: true

    - label:
          "The cluster Identifier 49 (0x0031) is present in the ServerList
          attribute"
      verification: |

      disabled: true

    - label: "The FeatureMap attribute value is 2"
      verification: |

      disabled: true

    - label:
          "TH sends the AddOrUpdateThreadNetwork command to the DUT with the
          following fields: 1. OperationalDataset field set to PIXIT.CNET.THREAD
          _1ST_OPERATIONAL DATASET 2. Breadcrumb field set to 1"
      PICS: CNET.S.C03.Rsp
      verification: |
          ./chip-tool networkcommissioning add-or-update-thread-network-network hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning add-or-update-thread-network hex:1011101122222229 51 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH sends RemoveNetwork command to the DUT with NetworkID field set to
          PIXIT.CNET.THREAD_1ST_O PERATIONALDATASET and Breadcrumb field set to
          1"
      PICS: CNET.S.C04.Rsp
      verification: |
          ./chip-tool networkcommissioning remove-network hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning remove-network hex:1011101122222229 51 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH sends ConnectNetwork command to the DUT with NetworkID field set
          to PIXIT.CNET.THREAD_1ST_O PERATIONALDATASET and Breadcrumb field set
          to 1"
      PICS: CNET.S.C06.Rsp
      verification: |
          ./chip-tool networkcommissioning connect-network hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning connect-network hex:1011101122222229 51 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true