# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    12.4.5. [TC-CNET-4.5] [Wi-Fi] FAILSAFE_REQUIRED message Validation
    [DUT-Server]

PICS:
    - CNET.S.F00

config:
    nodeId: 0x12344321
    cluster: "Basic"
    endpoint: 0

tests:
    - label:
          "TH sends the AddOrUpdateWiFiNetwork command to the DUT with the
          following argument: SSID argument value as Userwifi_ssid Credentials
          argument value as Userwifi_Credentials Breadcrumb argument value as 1"
      PICS: CNET.S.C02.Rsp
      verification: |
          ./chip-tool networkcommissioning add-or-update-wi-fi-network  hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning add-or-update-wi-fi-network hex:47524C50726976617465 grlprivatewifi092010 1 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH sends RemoveNetwork command to the DUT with NetworkID argument
          value as Userwifi_ssid and Breadcrumb argument value as 1"
      PICS: CNET.S.C02.Rsp
      verification: |
          ./chip-tool networkcommissioning remove hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning remove-network hex:47524C50726976617465 1 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH sends ConnectNetwork command to the DUT with NetworkID argument
          value as Userwifi_ssid and Breadcrumb argument value as 1"
      PICS: CNET.S.C06.Rsp
      verification: |
          ./chip-tool networkcommissioning connect hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning connect-network hex:47524C50726976617465 1 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true