| /* |
| * |
| * Copyright (c) 2021 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "AppTask.h" |
| #include "AppConfig.h" |
| #include "AppEvent.h" |
| #include "ButtonHandler.h" |
| #include "LEDWidget.h" |
| #include <app-common/zap-generated/attributes/Accessors.h> |
| #include <app-common/zap-generated/cluster-objects.h> |
| |
| #include <app/clusters/door-lock-server/door-lock-server.h> |
| #include <app/clusters/identify-server/identify-server.h> |
| #include <app/server/Dnssd.h> |
| #include <app/server/OnboardingCodesUtil.h> |
| #include <app/server/Server.h> |
| #include <app/util/attribute-storage.h> |
| #include <assert.h> |
| #include <credentials/DeviceAttestationCredsProvider.h> |
| #include <credentials/examples/DeviceAttestationCredsExample.h> |
| #include <cy_wcm.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <setup_payload/QRCodeSetupPayloadGenerator.h> |
| #include <setup_payload/SetupPayload.h> |
| |
| #include <app/clusters/network-commissioning/network-commissioning.h> |
| #include <platform/Infineon/PSOC6/NetworkCommissioningDriver.h> |
| |
| #include <DeviceInfoProviderImpl.h> |
| #include <app/clusters/door-lock-server/door-lock-server.h> |
| #include <app/clusters/identify-server/identify-server.h> |
| |
| #if ENABLE_DEVICE_ATTESTATION |
| #include <DeviceAttestationCredsExampleTrustM.h> |
| #endif |
| |
| /* OTA related includes */ |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| #include <app/clusters/ota-requestor/BDXDownloader.h> |
| #include <app/clusters/ota-requestor/DefaultOTARequestor.h> |
| #include <app/clusters/ota-requestor/DefaultOTARequestorDriver.h> |
| #include <app/clusters/ota-requestor/DefaultOTARequestorStorage.h> |
| #include <platform/Infineon/PSOC6/OTAImageProcessorImpl.h> |
| |
| using chip::BDXDownloader; |
| using chip::CharSpan; |
| using chip::DefaultOTARequestor; |
| using chip::FabricIndex; |
| using chip::GetRequestorInstance; |
| using chip::NodeId; |
| using chip::OTADownloader; |
| using chip::DeviceLayer::OTAImageProcessorImpl; |
| using chip::System::Layer; |
| |
| using namespace ::chip; |
| using namespace ::chip::app; |
| using namespace chip::TLV; |
| using namespace ::chip::Credentials; |
| using namespace ::chip::DeviceLayer; |
| using namespace ::chip::System; |
| |
| #endif |
| |
| #define FACTORY_RESET_CANCEL_WINDOW_TIMEOUT 5000 |
| #define APP_TASK_STACK_SIZE (4096) |
| #define APP_TASK_PRIORITY 2 |
| #define APP_EVENT_QUEUE_SIZE 10 |
| |
| using chip::app::Clusters::DoorLock::DlLockState; |
| using chip::app::Clusters::DoorLock::OperationErrorEnum; |
| using chip::app::Clusters::DoorLock::OperationSourceEnum; |
| namespace { |
| |
| TimerHandle_t sFunctionTimer; // FreeRTOS app sw timer. |
| |
| TaskHandle_t sAppTaskHandle; |
| QueueHandle_t sAppEventQueue; |
| |
| LEDWidget sStatusLED; |
| LEDWidget sLockLED; |
| |
| bool sIsWiFiStationProvisioned = false; |
| bool sIsWiFiStationEnabled = false; |
| bool sIsWiFiStationConnected = false; |
| bool sHaveBLEConnections = false; |
| |
| StackType_t appStack[APP_TASK_STACK_SIZE / sizeof(StackType_t)]; |
| StaticTask_t appTaskStruct; |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| DefaultOTARequestor gRequestorCore; |
| DefaultOTARequestorStorage gRequestorStorage; |
| DefaultOTARequestorDriver gRequestorUser; |
| BDXDownloader gDownloader; |
| OTAImageProcessorImpl gImageProcessor; |
| #endif |
| |
| } // namespace |
| |
| using namespace ::chip; |
| using namespace ::chip::app; |
| using namespace chip::TLV; |
| using namespace ::chip::Credentials; |
| using namespace ::chip::DeviceLayer; |
| using namespace ::chip::System; |
| using namespace P6DoorLock::LockInitParams; |
| |
| AppTask AppTask::sAppTask; |
| static chip::DeviceLayer::DeviceInfoProviderImpl gExampleDeviceInfoProvider; |
| |
| namespace { |
| app::Clusters::NetworkCommissioning::Instance |
| sWiFiNetworkCommissioningInstance(0 /* Endpoint Id */, &(NetworkCommissioning::P6WiFiDriver::GetInstance())); |
| } // namespace |
| |
| void NetWorkCommissioningInstInit() |
| { |
| sWiFiNetworkCommissioningInstance.Init(); |
| } |
| |
| void OnIdentifyStart(Identify *) |
| { |
| ChipLogProgress(Zcl, "OnIdentifyStart"); |
| } |
| |
| void OnIdentifyStop(Identify *) |
| { |
| ChipLogProgress(Zcl, "OnIdentifyStop"); |
| } |
| |
| static Identify gIdentify1 = { |
| chip::EndpointId{ 1 }, |
| OnIdentifyStart, |
| OnIdentifyStop, |
| Clusters::Identify::IdentifyTypeEnum::kNone, |
| }; |
| |
| static void InitServer(intptr_t context) |
| { |
| // Init ZCL Data Model |
| static chip::CommonCaseDeviceServerInitParams initParams; |
| (void) initParams.InitializeStaticResourcesBeforeServerInit(); |
| chip::Server::GetInstance().Init(initParams); |
| |
| gExampleDeviceInfoProvider.SetStorageDelegate(&Server::GetInstance().GetPersistentStorage()); |
| chip::DeviceLayer::SetDeviceInfoProvider(&gExampleDeviceInfoProvider); |
| |
| // Initialize device attestation config |
| #if ENABLE_DEVICE_ATTESTATION |
| SetDeviceAttestationCredentialsProvider(Examples::GetExampleTrustMDACProvider()); |
| #else |
| SetDeviceAttestationCredentialsProvider(Examples::GetExampleDACProvider()); |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| GetAppTask().InitOTARequestor(); |
| #endif |
| |
| GetAppTask().lockMgr_Init(); |
| } |
| |
| CHIP_ERROR AppTask::StartAppTask() |
| { |
| sAppEventQueue = xQueueCreate(APP_EVENT_QUEUE_SIZE, sizeof(AppEvent)); |
| if (sAppEventQueue == NULL) |
| { |
| P6_LOG("Failed to allocate app event queue"); |
| appError(APP_ERROR_EVENT_QUEUE_FAILED); |
| } |
| |
| // Start App task. |
| sAppTaskHandle = xTaskCreateStatic(AppTaskMain, APP_TASK_NAME, ArraySize(appStack), NULL, 1, appStack, &appTaskStruct); |
| return (sAppTaskHandle == nullptr) ? APP_ERROR_CREATE_TASK_FAILED : CHIP_NO_ERROR; |
| } |
| |
| void AppTask::lockMgr_Init() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| NetWorkCommissioningInstInit(); |
| P6_LOG("Current Software Version: %d", CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION); |
| // Initial lock state |
| chip::app::DataModel::Nullable<chip::app::Clusters::DoorLock::DlLockState> state; |
| chip::EndpointId endpointId{ 1 }; |
| chip::app::Clusters::DoorLock::Attributes::LockState::Get(endpointId, state); |
| |
| uint8_t numberOfCredentialsPerUser = 0; |
| if (!DoorLockServer::Instance().GetNumberOfCredentialsSupportedPerUser(endpointId, numberOfCredentialsPerUser)) |
| { |
| ChipLogError(Zcl, |
| "Unable to get number of credentials supported per user when initializing lock endpoint, defaulting to 5 " |
| "[endpointId=%d]", |
| endpointId); |
| numberOfCredentialsPerUser = 5; |
| } |
| |
| uint16_t numberOfUsers = 0; |
| if (!DoorLockServer::Instance().GetNumberOfUserSupported(endpointId, numberOfUsers)) |
| { |
| ChipLogError(Zcl, |
| "Unable to get number of supported users when initializing lock endpoint, defaulting to 10 [endpointId=%d]", |
| endpointId); |
| numberOfUsers = 10; |
| } |
| |
| uint8_t numberOfWeekdaySchedulesPerUser = 0; |
| if (!DoorLockServer::Instance().GetNumberOfWeekDaySchedulesPerUserSupported(endpointId, numberOfWeekdaySchedulesPerUser)) |
| { |
| ChipLogError( |
| Zcl, |
| "Unable to get number of supported weekday schedules when initializing lock endpoint, defaulting to 10 [endpointId=%d]", |
| endpointId); |
| numberOfWeekdaySchedulesPerUser = 10; |
| } |
| |
| uint8_t numberOfYeardaySchedulesPerUser = 0; |
| if (!DoorLockServer::Instance().GetNumberOfYearDaySchedulesPerUserSupported(endpointId, numberOfYeardaySchedulesPerUser)) |
| { |
| ChipLogError( |
| Zcl, |
| "Unable to get number of supported yearday schedules when initializing lock endpoint, defaulting to 10 [endpointId=%d]", |
| endpointId); |
| numberOfYeardaySchedulesPerUser = 10; |
| } |
| |
| uint8_t numberOfHolidaySchedules = 0; |
| if (!DoorLockServer::Instance().GetNumberOfHolidaySchedulesSupported(endpointId, numberOfHolidaySchedules)) |
| { |
| ChipLogError( |
| Zcl, |
| "Unable to get number of supported holiday schedules when initializing lock endpoint, defaulting to 10 [endpointId=%d]", |
| endpointId); |
| numberOfHolidaySchedules = 10; |
| } |
| |
| err = LockMgr().Init(state, |
| ParamBuilder() |
| .SetNumberOfUsers(numberOfUsers) |
| .SetNumberOfCredentialsPerUser(numberOfCredentialsPerUser) |
| .SetNumberOfWeekdaySchedulesPerUser(numberOfWeekdaySchedulesPerUser) |
| .SetNumberOfYeardaySchedulesPerUser(numberOfYeardaySchedulesPerUser) |
| .SetNumberOfHolidaySchedules(numberOfHolidaySchedules) |
| .GetLockParam()); |
| if (err != CHIP_NO_ERROR) |
| { |
| P6_LOG("LockMgr().Init() failed"); |
| appError(err); |
| } |
| |
| LockMgr().SetCallbacks(ActionInitiated, ActionCompleted); |
| |
| // Initialize LEDs |
| sStatusLED.Init(SYSTEM_STATE_LED); |
| sLockLED.Init(LOCK_STATE_LED); |
| |
| if (state.Value() == DlLockState::kUnlocked) |
| { |
| sLockLED.Set(false); |
| } |
| else |
| { |
| sLockLED.Set(true); |
| } |
| |
| ConfigurationMgr().LogDeviceConfig(); |
| // Users and credentials should be checked once from flash on boot |
| LockMgr().ReadConfigValues(); |
| // Print setup info |
| PrintOnboardingCodes(chip::RendezvousInformationFlag(chip::RendezvousInformationFlag::kBLE)); |
| } |
| |
| void AppTask::Init() |
| { |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| int rc = boot_set_confirmed(); |
| if (rc != 0) |
| { |
| P6_LOG("boot_set_confirmed failed"); |
| appError(CHIP_ERROR_UNINITIALIZED); |
| } |
| #endif |
| // Initialise WSTK buttons PB0 and PB1 (including debounce). |
| ButtonHandler::Init(); |
| |
| // Create FreeRTOS sw timer for Function Selection. |
| sFunctionTimer = xTimerCreate("FnTmr", // Just a text name, not used by the RTOS kernel |
| 1, // == default timer period (mS) |
| false, // no timer reload (==one-shot) |
| (void *) this, // init timer id = app task obj context |
| TimerEventHandler // timer callback handler |
| ); |
| if (sFunctionTimer == NULL) |
| { |
| P6_LOG("funct timer create failed"); |
| appError(APP_ERROR_CREATE_TIMER_FAILED); |
| } |
| |
| // Register the callback to init the MDNS server when connectivity is available |
| PlatformMgr().AddEventHandler( |
| [](const ChipDeviceEvent * event, intptr_t arg) { |
| // Restart the server whenever an ip address is renewed |
| if (event->Type == DeviceEventType::kInternetConnectivityChange) |
| { |
| if (event->InternetConnectivityChange.IPv4 == kConnectivity_Established || |
| event->InternetConnectivityChange.IPv6 == kConnectivity_Established) |
| { |
| chip::app::DnssdServer::Instance().StartServer(); |
| } |
| } |
| }, |
| 0); |
| |
| chip::DeviceLayer::PlatformMgr().ScheduleWork(InitServer, reinterpret_cast<intptr_t>(nullptr)); |
| } |
| |
| void AppTask::AppTaskMain(void * pvParameter) |
| { |
| AppEvent event; |
| |
| sAppTask.Init(); |
| P6_LOG("App Task started"); |
| |
| while (true) |
| { |
| BaseType_t eventReceived = xQueueReceive(sAppEventQueue, &event, portMAX_DELAY); |
| if (eventReceived == pdTRUE) |
| { |
| sAppTask.DispatchEvent(&event); |
| } |
| // Collect connectivity and configuration state from the CHIP stack. Because |
| // the CHIP event loop is being run in a separate task, the stack must be |
| // locked while these values are queried. However we use a non-blocking |
| // lock request (TryLockCHIPStack()) to avoid blocking other UI activities |
| // when the CHIP task is busy (e.g. with a long crypto operation). |
| if (PlatformMgr().TryLockChipStack()) |
| { |
| sIsWiFiStationEnabled = ConnectivityMgr().IsWiFiStationEnabled(); |
| sIsWiFiStationConnected = ConnectivityMgr().IsWiFiStationConnected(); |
| sIsWiFiStationProvisioned = ConnectivityMgr().IsWiFiStationProvisioned(); |
| sHaveBLEConnections = (ConnectivityMgr().NumBLEConnections() != 0); |
| PlatformMgr().UnlockChipStack(); |
| } |
| |
| // Update the status LED if factory reset has not been initiated. |
| // |
| // If system has "full connectivity", keep the LED On constantly. |
| // |
| // If thread and service provisioned, but not attached to the thread network |
| // yet OR no connectivity to the service OR subscriptions are not fully |
| // established THEN blink the LED Off for a short period of time. |
| // |
| // If the system has ble connection(s) uptill the stage above, THEN blink |
| // the LEDs at an even rate of 100ms. |
| // |
| // Otherwise, blink the LED ON for a very short time. |
| if (sAppTask.mFunction != Function::kFactoryReset) |
| { |
| if (sIsWiFiStationEnabled && sIsWiFiStationProvisioned && !sIsWiFiStationConnected) |
| { |
| sStatusLED.Blink(950, 50); |
| } |
| else if (sHaveBLEConnections) |
| { |
| sStatusLED.Blink(100, 100); |
| } |
| else |
| { |
| sStatusLED.Blink(50, 950); |
| } |
| } |
| sStatusLED.Animate(); |
| sLockLED.Animate(); |
| } |
| } |
| |
| void AppTask::LockActionEventHandler(AppEvent * event) |
| { |
| LockManager::Action_t action; |
| int32_t actor; |
| |
| switch (event->Type) |
| { |
| case AppEvent::kEventType_Lock: { |
| action = static_cast<LockManager::Action_t>(event->LockEvent.Action); |
| actor = event->LockEvent.Actor; |
| break; |
| } |
| |
| case AppEvent::kEventType_Button: { |
| |
| P6_LOG("%s [Action: %d]", __FUNCTION__, event->ButtonEvent.Action); |
| |
| if (event->ButtonEvent.Action == APP_BUTTON_LONG_PRESS) |
| { |
| P6_LOG("Sending a lock jammed event"); |
| |
| /* Generating Door Lock Jammed event */ |
| DoorLockServer::Instance().SendLockAlarmEvent(1 /* Endpoint Id */, AlarmCodeEnum::kLockJammed); |
| |
| return; |
| } |
| else |
| { |
| if (LockMgr().NextState() == true) |
| { |
| action = LockManager::LOCK_ACTION; |
| } |
| else |
| { |
| action = LockManager::UNLOCK_ACTION; |
| } |
| |
| actor = AppEvent::kEventType_Button; |
| } |
| break; |
| } |
| |
| default: |
| return; |
| } |
| |
| if (!LockMgr().InitiateAction(actor, action)) |
| { |
| P6_LOG("Action is already in progress or active."); |
| } |
| } |
| |
| void AppTask::ButtonEventHandler(uint8_t btnIdx, uint8_t btnAction) |
| { |
| if (btnIdx != APP_LOCK_BUTTON_IDX && btnIdx != APP_FUNCTION_BUTTON_IDX) |
| { |
| return; |
| } |
| |
| AppEvent button_event = {}; |
| button_event.Type = AppEvent::kEventType_Button; |
| button_event.ButtonEvent.ButtonIdx = btnIdx; |
| button_event.ButtonEvent.Action = btnAction; |
| |
| if (btnIdx == APP_LOCK_BUTTON_IDX) |
| { |
| button_event.Handler = LockActionEventHandler; |
| sAppTask.PostEvent(&button_event); |
| } |
| else if (btnIdx == APP_FUNCTION_BUTTON_IDX) |
| { |
| button_event.Handler = FunctionHandler; |
| sAppTask.PostEvent(&button_event); |
| } |
| } |
| |
| void AppTask::TimerEventHandler(TimerHandle_t timer) |
| { |
| AppEvent event; |
| event.Type = AppEvent::kEventType_Timer; |
| event.TimerEvent.Context = (void *) timer; |
| event.Handler = FunctionTimerEventHandler; |
| sAppTask.PostEvent(&event); |
| } |
| |
| void AppTask::FunctionTimerEventHandler(AppEvent * event) |
| { |
| if (event->Type != AppEvent::kEventType_Timer) |
| { |
| return; |
| } |
| |
| if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == Function::kFactoryReset) |
| { |
| // Actually trigger Factory Reset |
| sAppTask.mFunction = Function::kNoneSelected; |
| chip::Server::GetInstance().ScheduleFactoryReset(); |
| } |
| } |
| |
| void AppTask::FunctionHandler(AppEvent * event) |
| { |
| if (event->ButtonEvent.ButtonIdx != APP_FUNCTION_BUTTON_IDX) |
| { |
| return; |
| } |
| |
| if (event->ButtonEvent.Action == APP_BUTTON_PRESSED) |
| { |
| if (!sAppTask.mFunctionTimerActive && sAppTask.mFunction == Function::kNoneSelected) |
| { |
| P6_LOG("Factory Reset Triggered. Press button again within %us to cancel.", FACTORY_RESET_CANCEL_WINDOW_TIMEOUT / 1000); |
| // Start timer for FACTORY_RESET_CANCEL_WINDOW_TIMEOUT to allow user to |
| // cancel, if required. |
| sAppTask.StartTimer(FACTORY_RESET_CANCEL_WINDOW_TIMEOUT); |
| |
| sAppTask.mFunction = Function::kFactoryReset; |
| |
| // Turn off all LEDs before starting blink to make sure blink is |
| // co-ordinated. |
| sStatusLED.Set(false); |
| sLockLED.Set(false); |
| |
| sStatusLED.Blink(500); |
| sLockLED.Blink(500); |
| } |
| else if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == Function::kFactoryReset) |
| { |
| // Set lock status LED back to show state of lock. |
| sLockLED.Set(!LockMgr().NextState()); |
| |
| sAppTask.CancelTimer(); |
| |
| // Change the function to none selected since factory reset has been |
| // canceled. |
| sAppTask.mFunction = Function::kNoneSelected; |
| |
| P6_LOG("Factory Reset has been Canceled"); |
| } |
| } |
| } |
| |
| void AppTask::CancelTimer() |
| { |
| if (xTimerStop(sFunctionTimer, 0) == pdFAIL) |
| { |
| P6_LOG("app timer stop() failed"); |
| appError(APP_ERROR_STOP_TIMER_FAILED); |
| } |
| |
| mFunctionTimerActive = false; |
| } |
| |
| void AppTask::StartTimer(uint32_t aTimeoutInMs) |
| { |
| if (xTimerIsTimerActive(sFunctionTimer)) |
| { |
| P6_LOG("app timer already started!"); |
| CancelTimer(); |
| } |
| |
| // timer is not active, change its period to required value (== restart). |
| // FreeRTOS- Block for a maximum of 100 ticks if the change period command |
| // cannot immediately be sent to the timer command queue. |
| if (xTimerChangePeriod(sFunctionTimer, aTimeoutInMs / portTICK_PERIOD_MS, 100) != pdPASS) |
| { |
| P6_LOG("app timer start() failed"); |
| appError(APP_ERROR_START_TIMER_FAILED); |
| } |
| |
| mFunctionTimerActive = true; |
| } |
| |
| void AppTask::ActionInitiated(LockManager::Action_t aAction, int32_t aActor) |
| { |
| // If the action has been initiated by the lock, update the lock trait |
| // and start flashing the LEDs rapidly to indicate action initiation. |
| if (aAction == LockManager::LOCK_ACTION) |
| { |
| P6_LOG("Lock Action has been initiated"); |
| } |
| else if (aAction == LockManager::UNLOCK_ACTION) |
| { |
| P6_LOG("Unlock Action has been initiated"); |
| } |
| |
| if (aActor == AppEvent::kEventType_Button) |
| { |
| sAppTask.mSyncClusterToButtonAction = true; |
| } |
| |
| sLockLED.Blink(50, 50); |
| } |
| |
| void AppTask::ActionCompleted(LockManager::Action_t aAction) |
| { |
| // if the action has been completed by the lock, update the lock trait. |
| // Turn on the lock LED if in a LOCKED state OR |
| // Turn off the lock LED if in an UNLOCKED state. |
| if (aAction == LockManager::LOCK_ACTION) |
| { |
| P6_LOG("Lock Action has been completed"); |
| |
| sLockLED.Set(true); |
| } |
| else if (aAction == LockManager::UNLOCK_ACTION) |
| { |
| P6_LOG("Unlock Action has been completed"); |
| |
| sLockLED.Set(false); |
| } |
| |
| if (sAppTask.mSyncClusterToButtonAction) |
| { |
| sAppTask.UpdateClusterState(); |
| sAppTask.mSyncClusterToButtonAction = false; |
| } |
| } |
| |
| void AppTask::ActionRequest(int32_t aActor, LockManager::Action_t aAction) |
| { |
| AppEvent event; |
| event.Type = AppEvent::kEventType_Lock; |
| event.LockEvent.Actor = aActor; |
| event.LockEvent.Action = aAction; |
| event.Handler = LockActionEventHandler; |
| PostEvent(&event); |
| } |
| |
| void AppTask::PostEvent(const AppEvent * event) |
| { |
| if (sAppEventQueue != NULL) |
| { |
| BaseType_t status; |
| if (xPortIsInsideInterrupt()) |
| { |
| BaseType_t higherPrioTaskWoken = pdFALSE; |
| status = xQueueSendFromISR(sAppEventQueue, event, &higherPrioTaskWoken); |
| |
| #ifdef portYIELD_FROM_ISR |
| portYIELD_FROM_ISR(higherPrioTaskWoken); |
| #elif portEND_SWITCHING_ISR // portYIELD_FROM_ISR or portEND_SWITCHING_ISR |
| portEND_SWITCHING_ISR(higherPrioTaskWoken); |
| #else // portYIELD_FROM_ISR or portEND_SWITCHING_ISR |
| #error "Must have portYIELD_FROM_ISR or portEND_SWITCHING_ISR" |
| #endif // portYIELD_FROM_ISR or portEND_SWITCHING_ISR |
| } |
| else |
| { |
| status = xQueueSend(sAppEventQueue, event, 1); |
| } |
| |
| if (!status) |
| P6_LOG("Failed to post event to app task event queue"); |
| } |
| else |
| { |
| P6_LOG("Event Queue is NULL should never happen"); |
| } |
| } |
| |
| void AppTask::DispatchEvent(AppEvent * event) |
| { |
| if (event->Handler) |
| { |
| event->Handler(event); |
| } |
| else |
| { |
| P6_LOG("Event received with no handler. Dropping event."); |
| } |
| } |
| |
| void AppTask::UpdateCluster(intptr_t context) |
| { |
| bool unlocked = LockMgr().NextState(); |
| DlLockState newState = unlocked ? DlLockState::kUnlocked : DlLockState::kLocked; |
| |
| OperationSourceEnum source = OperationSourceEnum::kUnspecified; |
| |
| // write the new lock value |
| Protocols::InteractionModel::Status status = DoorLockServer::Instance().SetLockState(1, newState, source) |
| ? Protocols::InteractionModel::Status::Success |
| : Protocols::InteractionModel::Status::Failure; |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| P6_LOG("ERR: updating lock state %x", to_underlying(status)); |
| } |
| } |
| |
| void AppTask::UpdateClusterState(void) |
| { |
| chip::DeviceLayer::PlatformMgr().ScheduleWork(UpdateCluster, reinterpret_cast<intptr_t>(nullptr)); |
| } |
| |
| void vApplicationStackOverflowHook(TaskHandle_t pxTask, char * pcTaskName) |
| { |
| (void) pxTask; |
| |
| /* Run time stack overflow checking is performed if |
| configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook |
| function is called if a stack overflow is detected. */ |
| printf("ERROR: stack overflow with task %s\r\n", pcTaskName); |
| } |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| void AppTask::InitOTARequestor() |
| { |
| SetRequestorInstance(&gRequestorCore); |
| ConfigurationMgr().StoreSoftwareVersion(CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION); |
| gRequestorStorage.Init(chip::Server::GetInstance().GetPersistentStorage()); |
| gRequestorCore.Init(chip::Server::GetInstance(), gRequestorStorage, gRequestorUser, gDownloader); |
| gImageProcessor.SetOTADownloader(&gDownloader); |
| gDownloader.SetImageProcessorDelegate(&gImageProcessor); |
| |
| gRequestorUser.Init(&gRequestorCore, &gImageProcessor); |
| |
| P6_LOG("Current Software Version: %u", CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION); |
| P6_LOG("Current Software Version String: %s", CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING); |
| } |
| #endif |